Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
1000
1150
1200
1250
1300
1350
1400
1440
1450
1460
1470
1480
1490
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1510
1520
1530
1540
1550
1560
1600
1620
| Product Name | Notes |
|---|---|
| A Guide to American Crane Standards for Electric Overhead Traveling Cranes, Hoists and Related Equipment for Nuclear Facilities | |
| Acoustics. Noise emitted by machinery and equipment. Guidelines for the preparation of test codes of engineering grade requiring noise measurement at the operators or bystanders position | |
| ALIGN MECHANICAL AND CIVIL-STRUCTURAL EARTHQUAKE DESIGN AND QUALIFICATION RULES FOR ASME B31 PIPING SYSTEMS AND PIPELINES | |
| AN INVESTIGATION OF THREE RADIOGRAPHIC ACCESS PORT PLUG GEOMETRIES AND THE SURROUNDING PIPE WALL UNDERGOING CREEP | |
| ANALYSIS OF SELECTED NONDESTRUCTIVE EXAMINATION (NDE) METHODOLOGIES FOR THE ASSESSMENT OF CRACKING IN CONCRETE CONTAINMENTS | |
| Anchor Bolt Design Guide | |
| Application of ACI 336.1-01, Specification for the Construction of Drilled Piers | |
| Application of ACI 351.4M-14, Specification for Installation of Cementitious Grouting between Foundations and Equipment Bases (Metric) | |
| Application of ACI 351.5M-15, Specification for Installation of Epoxy Grout between Foundations and Equipment Bases (Metric) | |
| ASME CODE CONSIDERATIONS FOR THE INTERMEDIATE HEAT EXCHANGER (IHX) | |
| ASME CODE DEVELOPMENT ROADMAPFOR HOPE PIPE IN NUCLEAR SERVICE | |
| ASME FLAWED CYLINDER TESTING | |
| ASME SECTION I PED GUIDE Supplement to Guide for ASME Stamp Holders Use of ASME Section I to Meet the EC Pressure Equipment Directive {97/23/EC) | |
| Augered Cast-in-Place Pile Installation Specification | |
| AUTOMATED EXTERNAL PRESSURE CHART GENERATION | |
| BLAST TESTING OF PRESTRESSED CONCRETE UNDER IMPULSIVE LOADING | |
| BOLTED FLANGED CONNECTIONS IN ELEVATED TEMPERATURE SERVICE | |
| BRANCH LEG STUDY FOR BIOPROCESSING EQUIPMENT | |
| BUCKLING OF CYLINDRICAL, THIN WALL,TRAILER TRUCK TANKS AND ASME SECTION XII | |
| COAL-FIRED PLANT DECOMMISSIONING INVESTIGATION REPORT | |
| CODE COMPARISON REPORT for Class 1 Nuclear Power Plant Components | |
| COMPARISON AND VALIDATION OF CREEP-BUCKLING ANALYSIS METHODS | |
| COMPARISON OF FEM STORAGE/RETRIEVAL MACHINE DOCUMENTS TO THE ASME B30.13 SPECIFICATION | |
| COMPARISON OF PRESSURE VESSEL CODES ASME SECTION VIII AND EN13445 Technical, Commercial, and Usage Comparison Design Fatigue Life Comparison | |
| COMPARISON REPORT BETWEEN ASME A17.1/B44 AND ISO 8100-1/2 REQUIREMENTS FOR ELECTRIC ELEVATORS | |
| COMPARISON REPORT ON WELDING QUALIFICATION AND WELDING QUALITY ASSURANCE | |
| COMPREHENSIVE COMPARISON OF INTERNATIONAL QUALITY STANDARDS | |
| COMPREHENSIVE EVALUATION OF THE NSQ-100 NUCLEAR SAFETY AND QUALITY MANAGEMENT SYSTEM REQUIREMENTS | |
| Concentrated Solar Power (CSP) Codes and Standards Gap Analysis | |
| Concrete Typical Details | |
| CORRECT AND EXTEND ALLOWABLE STRESS VALUES FOR 304 AND 316 STAINLESS STEEL | |
| CORRECTIONS TO STAINLESS STEEL ALLOWABLE STRESSES | |
| CORROSION OF A193 GRADE B7 BOLT MATERIAL IN BWR SODIUM PENTABORATE SOLUTIONS | |
| CREEP AND CREEP-FATIGUE CRACK GROWTH AT STRUCTURAL DISCONTINUITIES AND WELDS | |
| CREEP-FATIGUE DATA AND EXISTING EVALUATION PROCEDURES FOR GRADE 91 AND HASTELLOY XR | |
| Creep-Fatigue Flaw Growth Analysis to Support Elevated Temperature Flaw Size Acceptance Criteria | |
| CRITERIA DOCUMENT FOR SHELL-AND-TUBE HEAT EXCHANGERS ACCORDING TO PART UHX OF ASME SECTION VIII DIVISION 1 | |
| CRITERIA FOR RELIABILITY -BASED DESIGN AND ASSESSMENT FOR ASME B31.8 CODE | |
| CYCLIC STRESS-STRAIN CURVES | |
| DATA SUPPORTING COMPOSITE TANK STANDARDS DEVELOPMENT FOR HYDROGEN INFRASTRUCTURE APPLICATIONS | |
| Definition of Terms for Metal Powder Compacting Presses and Tooling | |
| Definition of Terms Used in Metal Injection Molding (MIM) | |
| DEGRADATION OF NOTCH TOUGHNESS BY A POST WELD HEAT TREATMENT (PWHT) | |
| DESIGN FACTOR GUIDELINES FOR HIGH PRESSURE COMPOSITE HYDROGEN TANKS | |
| DESIGN GUIDELINES FOR CORROSION, EROSION AND STEAM OXIDATION OF BOILER TUBES IN PULVERIZED COAL-FIRED BOILERS | |
| DESIGN GUIDELINES FOR HYDROGEN PIPING AND PIPELINES | |
| DESIGN GUIDELINES FOR THE EFFECTS OF CREEP, FATIGUE & CREEP-FATIGUE INTERACTION WITH DESIGN-BY-ANALYSIS AND NONDESTRUCTIVE INSPECTION ACCEPTANCE CRITERIA | |
| Details for Angle Railings for Walking and Working Surfaces | |
| Details for Pipe Railing for Walking and Working Surfaces | |
| Determination of Charpy Impact Energy of Unnotched Metal Injection Molded (MIM) Test Specimens | |
| Determination of Properties of Sintered Bronze Powder Metallurgy (PM) Filter Powders | |
| DETERMINATION OF STRESS STRAIN CURVES OF 304, 304L, 316, 316L FOR STRAIN-BASED DESIGN CRITERIA | |
| DEVELOPMENT OF AVERAGE ISOCHRONOUS STRESS-STRAIN CURVES AND EQUATIONS AND EXTERNAL PRESSURE CHARTS AND EQUATIONS FOR 9CR-1MO-V STEEL | |
| DEVELOPMENT OF B31.8 CODE CONTENT TO ADDRESS COMPRESSOR PIPING VIBRATION AT THE DESIGN, STARTUP AND OPERATIONAL STAGES | |
| DEVELOPMENT OF BASIC TIME-DEPENDENT ALLOWABLE STRESSES FOR CREEP REGIME IN SECTION VIII DIVISION I | |
| DEVELOPMENT OF WELD STRENGTH REDUCTION FACTORS AND WELD JOINT INFLUENCE FACTORS FOR SERVICE IN THE CREEP REGIME AND APPLICATION TO ASME CODES | |
| Driven Piles Electronic Entry Data Sheet | |
| Driven Piles Specification | |
| EFFECT OF COOLING RATE ON THE MICROSTRUCTURE AND PROPERTIES OF DUPLEX STAINLESS STEEL WELDS | |
| EFFECT OF HOT WIRE FILLER METAL ADDITION ON GTAW HEAT INPUT FOR CORROSION RESISTANT OVERLAYS | |
| Effect of Thickness on the Transformation Behavior of Grade 91 Steel | |
| EFFECTS OF HIGH TEMPERATURES AND FIT-UP OF RIVETED JOINTS ON STEEL RIVETS | |
| Electrical Soldering/Desolderin g Hand Tools | |
| Electronic Data Entry Sheets for Supplier Weight Management for Onshore Modules Specification | |
| Electronic Entry Data Forms for Epoxy Grout | |
| Electronic Entry Data Sheet for Augered Cast-in-Place Piles Installation (SI Units) | |
| Electronic Entry Data Sheet for Augered Cast-in-Place Piles Installation (US Customary Units) | |
| Electronic Entry Data Sheet for Driven Piles Specification | |
| Electronic Entry Data Sheets for Augered Cast-in-Place Piles Installation | |
| ELECTROSTATIC DISCHARGE SENSITIVITY TESTING - HUMAN BODY MODEL (HBM) - COMPONENT LEVEL | |
| Electrostatic Discharge Sensitivity Testing \x96 Transmission Line Pulse (TLP ) \x96 Component Level | |
| Electrostatic Discharge Sensitivity Testing Charged Divice Model (cdm) Component Level | |
| ELEVATED TEMPERATURE MATERIAL PROPERTY COMPILATION FOR DESIGN-BY-ANALYSIS | |
| Epoxy Grout Specification | |
| Erection of Structural and Miscellaneous Steel Specification | |
| EVALUATION OF FRACTURE PROPERTIES TEST METHODS FOR HYDROGEN SERVICE | |
| EXTEND ALLOWABLE STRESS VALUES FOR ALLOY 800H | |
| EXTEND STRESS-STRAIN CURVE PARAMETERS AND CYCLIC STRESS-STRAIN CURVES TO ALL MATERIALS LISTED FOR SECTION VIII, DIVISIONS 1 AND 2 CONSTRUCTION | |
| EXTENDED FATIGUE EXEMPTION RULES FOR LOW CR ALLOYS INTO THE TIME-DEPENDENT RANGE FOR SECTION VIII DIV 2 | |
| EXTENDED LOW CHROME STEEL FATIGUE RULES | |
| External Pressure Design in Creep Range | |
| Fabrication and Installation of Anchor Bolts | |
| Fabrication of Structural and Miscellaneous Steel Specification | |
| Fixed Industrial Stairs | |
| Fixed Ladders and Cages Design Guide | |
| Fixed Ladders and Cages | |
| Floor Materials and Footwear Resistance Measurement in Combination with a Person | |
| Floor Materials and Footwear Voltage Measurement in Combination with a Person | |
| Footwear - Resistive Characterization | |
| FOR ELECTROSTATIC DISCHARGE SENSITIVITY TESTING - MACHINE MODEL (MM) - COMPONENT LEVEL | |
| FOR EVALUATING THE PERFORMANCE OF ELECTROSTATIC DISCHARGE SHIELDING MATERIALS - BAGS | |
| For the Protection of Electrostatic Discharge Susceptible Items Methods for the Resistance Testing of Gloves and Finger Cots | |
| GRAPHITE FOR HIGH TEMPERATURE GAS-COOLED NUCLEAR REACTORS | |
| Grating Design Guide | |
| Grating Details | |
| GUARANTEED HIGHER STRENGTH PROPERTIES | |
| GUIDE FOR THE DETERMINATION OF THE POROSITY IN POWDER METALLURGY (PM) PRODUCTS USING AUTOMATED IMAGE ANALYSIS | |
| GUIDE TO MOBILE CRANE STANDARDS | |
| GUIDE TO SAMPLE PREPARATION FOR THE CHEMICAL ANALYSIS OF THE METALLIC ELEMENTS IN POWDER METALLURGY (PM) MATERIALS | |
| Guide to Sample Preparation of Aluminum Powder Metallurgy (PM) Materials for Cross-Sectional Metallographic Evaluation | |
| Guide to Sample Preparation of Copper-Based Powder Metallurgy (PM) Materials for Cross-Sectional Metallographic Evaluation | |
| Guide to Sample Preparation of Ferrous Powder Metallurgy (PM) Materials for Cross-Sectional Metallographic Evaluation | |
| Guide to Temperature Profiling a Continuous Mesh-Belt Sintering Furnace | |
| GUIDELINES FOR IN-SERVICE INSPECTION OF COMPOSITE PRESSURE VESSELS | |
| Guidelines for Tank Foundation Designs | |
| HANDLING OF DIFFERENCES IN YS, UTS, AND CREEP RUPTURE STRENGTH BETWEEN ASME AND OTHER STANDARDS (EN, AS, ETC.) | |
| Heat Exchanger and Horizontal Vessel Foundation Design Guide | |
| Helical Piles Specification | |
| HYDROGEN STANDARDIZATION INTERIM REPORT For Tanks, Piping, and Pipelines | |
| IMPACT TESTING EXEMPTION CURVES FOR LOW TEMPERATURE OPERATION OF PRESSURE PIPING | |
| IMPREGNATED GRAPHITE FOR PRESSURE VESSELS | |
| IMPROVEMENT OF ASME NH FOR GRADE 91 NEGLIGIBLE CREEP AND CREEP FATIGUE | |
| Information technology. Keyboard layouts for text and office systems. Part 4: Numeric section | |
| Information technology. Keyboard layouts for text and office systems. Part 7: Symbols used to represent functions | |
| INTEGRITY MANAGEMENT OF STRESS CORROSION CRACKING IN GAS PIPELINE HIGH CONSEQUENCE AREAS | |
| INVESTIGATION OF TEMPERATURE DERATING FACTORS FOR HIGH-STRENGTH LINE PIPE | |
| LOCAL HEATING OF PIPING: THERMAL ANALYSIS | |
| LOCAL POST WELD HEAT TREATMENT: THERMAL GRADIENT STUDY | |
| Local Stresses in Nozzles in Shells and Formed Heads from External Loads | |
| Mechanics of Fatigue Crack Closure | |
| Method for Density Determination of Metal Injection Molded (MIM) Components Using a Gas Pycnometer | |
| Method for Determination of Acid Insoluble Matter in Iron and Copper Powders | |
| Method for Determination of Apparent Density of Free-Flowing Metal Powders Using the Hall Apparatus | |
| Method for Determination of Apparent Density of Metal Powders Using the Arnold Meter | |
| Method for Determination of Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Apparatus | |
| Method for Determination of Compressibility of Metal Powders | |
| METHOD FOR DETERMINATION OF DENSITY OF COMPACTED OR SINTERED POWDER METALLURGY PRODUCTS | |
| Method for Determination of Density of Impermeable Powder Metallurgy (PM) Products | |
| Method for Determination of Dimensional Change from Die Size of Sintered Powder Metallurgy (PM) Specimens | |
| Method for Determination of Effective Case Depth of Ferrous Powder Metallurgy (PM) Products | |
| Method for Determination of Flow Rate of Free-Flowing Metal Powders Using the Hall Apparatus | |
| Method for Determination of Flow Rate of Metal Powders Using the Carney Flowmeter Funnel | |
| Method for Determination of Green Strength of Compacted Powder Metallurgy (PM) Materials | |
| Method for Determination of Impact Energy of Unnotched Powder Metallurgy (PM) Test Specimens | |
| Method for Determination of Loss of Mass in a Reducing Atmosphere for Metal Powders (Hydrogen Loss) | |
| Method for Determination of Microindentation Hardness of Powder Metallurgy (PM) Materials | |
| Method for Determination of Oil Content, Surface-Connected Porosity and Oil-Impregnation Efficiency of Sintered Powder Metallurgy (PM) Products | |
| Method for Determination of Radial Crush Strength (K) of Powder Metallurgy (PM) Materials | |
| Method for Determination of Rotating Beam Fatigue Properties of Powder Metallurgy (PM) Materials | |
| Method for Determination of Sieve Analysis of Metal Powders | |
| Method for Determination of Surface Finish of Powder Metallurgy (PM) Products | |
| Method for Determination of Tap Density of Metal Powders | |
| Method for Determination of the Compressive Yield Strength of Powder Metallurgy (PM) Materials | |
| Method for Determination of the Corrosion Resistance of Metal Injection Molded (MIM) Grades of Stainless Steel Immersed in 2% Sulfuric Acid Solution | |
| Method for Determination of the Rockwell Apparent Hardness of Powder Metallurgy (PM) Products | |
| Method for Determination of the Tensile Properties of Powder Metallurgy (PM) Materials | |
| Method for Determination of Transverse Rupture Strength of Powder Metallurgy (PM) Materials | |
| Method for Measuring the Volume of the Apparent Density Cup Used with the Hall and Carney Apparatus (Standards 04 and 28) | |
| Method for Preparation of Uniaxially Compacted Powder Metallurgy (PM) Test Specimens | |
| Method for Preparing and Evaluating Metal Injection Molded (MIM) Sintered/Heat Treated Tension Test Specimens | |
| Method for Preparing and Evaluating Tension Test Specimens of Materials Produced from Metal Powders by Binder Jetting (BJT), Material Jetting (MJT), Material Extrusion (MEX) or Similar Metal Additive Manufacturing (Metal... | |
| Method for Preparing and Evaluating Tension Test Specimens of Materials Produced from Metal Powders by Powder Bed Fusion (PBF-LB and PBF-EB), Directed Energy Deposition (DED), and Cold Spray or Similar... | |
| Method for Sample Preparation and Determination of the Hardenability of Powder Metallurgy (PM) Steels (Jominy End-Quench Hardenability) | |
| Method for Sample Preparation for the Determination of the Total Carbon Content of Powder Metallurgy (PM) Materials (Excluding Cemented Carbides) | |
| Method for Sampling Metal Powders | |
| Method for Testing Copper-Base Infiltrating Powders | |
| Methods for Estimating Average Particle Size of Metal Powders Using Air Permeability | |
| NEW MATERIALS FOR ASME SUBSECTION NH | |
| NEXT GENERATION CONCRETE CONTAINMENT VESSELS | |
| NON DESTRUCTIVE EXAMINATION (NDE) AND IN-SERVICE INSPECTION (ISI) TECHNOLOGY FOR HIGH TEMPERATURE REACTORS | |
| NON DESTRUCTIVE TESTING AND EVALUATION METHODS FOR COMPOSITE HYDROGEN TANKS | |
| Nonshrink Cementitious Grout Specification | |
| OPERATING CONDITION ALLOWABLE STRESS VALUES IN ASME SECTION III SUBSECTION NH | |
| Orifice Flow Coefficient Equation Comparison | |
| Out line of Investigation for Optical Fiber/Communications /Signal/Coaxial Cable Outlet Boxes | |
| OUTLINE OF INVESTIGATION FOR ADAPTERS, FITTINGS AND COUPLINGS FOR ANHYDROUS AMMONIA AND FUEL GASES | |
| Outline of Investigation for Aerosol Duct Sealant | |
| OUTLINE OF INVESTIGATION FOR AIR PRESSURE MAINTENANCE DEVICES | |
| OUTLINE OF INVESTIGATION FOR AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT CABINET, ENCLOSURE AND RACK SYSTEMS | |
| OUTLINE OF INVESTIGATION FOR AUTOMATIC AIR RELEASE AND AIR/VACUUM VALVES FOR FIRE PROTECTION SERVICE | |
| Outline of Investigation for Automatically Resettable Supplementary Protectors | |
| OUTLINE OF INVESTIGATION FOR BATTERIES FOR USE IN ELECTRIC VEHICLES | |
| OUTLINE OF INVESTIGATION FOR BATTERIES FOR USE IN LIGHT ELECTRIC RAIL (LER) APPLICATIONS AND STATIONARY APPLICATIONS | |
| OUTLINE OF INVESTIGATION FOR BATTERIES FOR USE IN LIGHT ELECTRIC VEHICLE (LEV) APPLICATIONS | |
| Outline of Investigation for Battery Holders | |
| OUTLINE OF INVESTIGATION FOR BATTERY LEAD WIRE | |
| OUTLINE OF INVESTIGATION FOR BATTERY OPERATED HOSE NOZZLE VALVE READERS | |
| OUTLINE OF INVESTIGATION FOR BATTERY SEPARATORS | |
| OUTLINE OF INVESTIGATION FOR BOROHYDRIDE FUEL CARTRIDGES WITH INTEGRAL FUEL PROCESSING FOR USE WITH PORTABLE FUEL CELL POWER SYSTEMS OR SIMILAR EQUIPMENT | |
| OUTLINE OF INVESTIGATION FOR BOTTLED WATER PROGRAM | |
| Outline of Investigation for Butterfly Valve Indicator Posts for Fire Protection Service | |
| OUTLINE OF INVESTIGATION FOR CABLE MARKED "LIMITED COMBUSTIBLE" | |
| OUTLINE OF INVESTIGATION FOR CABLES FOR NETWORK-POWERED BROADBAND COMMUNICATIONS SYSTEMS | |
| OUTLINE OF INVESTIGATION FOR CEMENTITIOUS MATERIALS USED FOR RESURFACING SMOKE CHAMBER OF MASONRY FIREPLACES | |
| Outline of Investigation for Chimney Repair and Resurfacing Systems | |
| Outline of Investigation for Clothes Dryer Transition Duct | |
| OUTLINE OF INVESTIGATION FOR CO Gas Test Kit for Gas and Vapor Detectors and Sensors | |
| Outline of Investigation for Coaxial Fault Protectors for Network-Powered Broadband | |
| Outline of Investigation for Commercial Butane-Fueled Portable Cook Stoves | |
| Outline of Investigation for Commercial Wood-Fired Baking Ovens - Refractory Type | |
| OUTLINE OF INVESTIGATION FOR COMPONENT - CONNECTOR HOUSINGS | |
| OUTLINE OF INVESTIGATION FOR COMPOSITE PANELS | |
| OUTLINE OF INVESTIGATION FOR COMPRESSED GAS CHECK VALVES AND HOSE COUPLERS | |
| Outline of Investigation for Compressed Gas Cylinder Safety Caps | |
| OUTLINE OF INVESTIGATION FOR COMPRESSED GAS SHUTOFF VALVES | |
| OUTLINE OF INVESTIGATION FOR CONTAINMENT SUMPS, FITTINGS AND ACCESSORIES FOR FUELS | |
| OUTLINE OF INVESTIGATION FOR CONTROL AND COMMUNICATION UNITS FOR MASS NOTIFICATION SYSTEMS | |
| Outline of Investigation for Control Cabinets for Automatic Sprinkler Systems Used for Protection of Commercial Cooking Equipment | |
| OUTLINE OF INVESTIGATION FOR CONTROL MODE SPECIFIC APPLICATION (CMSA) SPRINKLERS HAVING NOMINAL K-FACTORS OF 19.6 AND 28.0 | |
| Outline of Investigation for Cord-Connected Controls with Standard NEMA Plugs and Receptacles, Direct Plug-In Controls, and Controls Intended to be Mounted in Wiring Boxes | |
| OUTLINE OF INVESTIGATION FOR CRIMP TOOLS FOR USE WITH WIRE CONNECTORS | |
| Outline of Investigation for Custom-Built Kiosks | |
| OUTLINE OF INVESTIGATION FOR DC RATED ATTACHMENT PLUGS AND OUTLET DEVICES INTENDED FOR USE WITH INFORMATION TECHNOLOGY AND TELECOMMUNICATION EQUIPMENT INSTALLED IN RESTRICTED ACCESS LOCATIONS | |
| OUTLINE OF INVESTIGATION FOR DEODORIZERS, OZONE GENERATOR TYPE | |
| Outline of Investigation for Direct Connect Systems for Solid Fuel Burning Appliances | |
| Outline of Investigation for Dry Chemical Extinguishing System Units, Engineered Type | |
| OUTLINE OF INVESTIGATION FOR ELECTRIC HEATING PRODUCTS FOR INSTALLATION UNDER FLOOR COVERINGS | |
| Outline of Investigation for Electric Motors and Generators for Use in Class I, Division 2 and Class II, Division 2 Hazardous (Classified) Locations | |
| Outline of Investigation for Electric Motors and Generators | |
| OUTLINE OF INVESTIGATION FOR ELECTRIC POWER SWITCHES | |
| OUTLINE OF INVESTIGATION FOR ELECTRIC SWIMMING POOL AND SPA COVER OPERATORS | |
| OUTLINE OF INVESTIGATION FOR Electric Vehicle Supply Equipment | |
| OUTLINE OF INVESTIGATION FOR ELECTRICALLY CONDUCTIVE CORROSION RESISTANT COMPOUNDS | |
| Outline of Investigation for Enclosures for Use in Hazardous (Classified) Locations Issue Number: 1 | |
| Outline of Investigation for Equipment with Remote Feeding Telecommunication Circuits Intended for Backwards Compatibility in Legacy Telecommunication Equipment | |
| OUTLINE OF INVESTIGATION FOR ESFR SPRINKLERS HAVING A NOMINAL K-FACTOR GREATER THAN 14.0 | |
| Outline of Investigation for Excavation Liners for Secondary Containment of Flammable and Combustible Liquids | |
| OUTLINE OF INVESTIGATION FOR EXIT DOORS | |
| Outline of Investigation for Expansion Chambers for Water Based Fire Protection Systems | |
| Outline of Investigation for Festoon Cable | |
| Outline of Investigation for Fire Containment Testing of Stationary Engine Generator Enclosures | |
| OUTLINE OF INVESTIGATION FOR FIRE TESTING OF RESIDENTIAL SPRINKLERS FOR USE WITH SMOOTH, FLAT, SLOPED CEILINGS HAVING PITCHES NOT EXCEEDING 4/12 | |
| OUTLINE OF INVESTIGATION FOR FIRE TESTING OF RESIDENTIAL SPRINKLERS FOR USE WITH SMOOTH, FLAT, SLOPED CEILINGS HAVING PITCHES NOT EXCEEDING 8/12 | |
| OUTLINE OF INVESTIGATION FOR FIRE TESTING OF SPRINKLERS AND WATER SPRAY NOZZLES FOR PROTECTION OF DEEP FAT FRYERS | |
| Outline of Investigation for Fire Tests for Electrical Circuit Protective Systems | |
| Outline of Investigation for Fire Tests of Balcony Assemblies | |
| OUTLINE OF INVESTIGATION FOR FIRE TESTS OF PRE-LIT ARTIFICIAL SEASONAL USE TREES AND OTHER SEASONAL DECORATIVE ITEMS | |
| Outline of Investigation for Fire-Resistant Cable Coating Materials | |
| OUTLINE OF INVESTIGATION FOR FIXED WATER-MOTOR COUPLED PUMPS FOR FOAM CONCENTRATE PROPORTIONING | |
| OUTLINE OF INVESTIGATION FOR FLEXIBLE CONNECTOR PIPING FOR FUELS | |
| OUTLINE OF INVESTIGATION FOR FLEXIBLE METALLIC TUBING | |
| OUTLINE OF INVESTIGATION FOR FUEL TANK ACCESSORIES | |
| OUTLINE OF INVESTIGATION FOR GAS BOOSTERS | |
| Outline of Investigation for Gas/Vapor-Blocked Cable Classified for Use in Class I Hazardous (Classified) Locations | |
| OUTLINE OF INVESTIGATION FOR Grooved and Plain End Fittings | |
| Outline of Investigation for Grounding Monitor Interrupters | |
| Outline of Investigation for Guards for Sprinklers | |
| OUTLINE OF INVESTIGATION FOR HAND-HELD OR HAND-TRANSPORTABLE ALKALINE (DIRECT BOROHYDRIDE) FUEL CELL POWER UNITS AND BOROHYDRIDE FUEL CARTRIDGES FOR USE WITH CONSUMER ELECTRONICS OR INFORMATION TECHNOLOGY EQUIPMENT | |
| OUTLINE OF INVESTIGATION FOR HAND-HELD OR HAND-TRANSPORTABLE FUEL CELL POWER UNITS WITH DISPOSABLE METHANOL FUEL CARTRIDGES FOR USE IN ORIGINAL EQUIPMENT MANUFACTURER S INFORMATION TECHNOLOGY EQUIPMENT | |
| OUTLINE OF INVESTIGATION FOR HAND-OPERATED CHEMICAL PUMPS | |
| OUTLINE OF INVESTIGATION FOR HAND-OPERATED PUMPS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS | |
| OUTLINE OF INVESTIGATION FOR HEAT RESISTANT WIRE | |
| Outline of Investigation for High-Expansion Foam-Extinguishing System Equipment and Concentrates | |
| OUTLINE OF INVESTIGATION FOR HIGH-SECURITY ELECTRONIC LOCKS | |
| OUTLINE OF INVESTIGATION FOR HIP AND RIDGE SHINGLES | |
| OUTLINE OF INVESTIGATION FOR HOSE NOZZLE VALVES FOR DIESEL FUEL, BIODIESEL FUEL, DIESEL/BIODIESEL BLENDS WITH NOMINAL BIODIESEL CONCENTRATIONS UP TO 20 PERCENT (B20), KEROSENE, AND FUEL OIL | |
| OUTLINE OF INVESTIGATION FOR HOSE NOZZLE VALVES FOR GASOLINE AND GASOLINE/ETHANOL BLENDS WITH NOMINAL ETHANOL CONCENTRATIONS UP TO 85 PERCENT (E0 \x96 E85) | |
| OUTLINE OF INVESTIGATION FOR HOSE REELS | |
| Outline of Investigation for Household Refrigerators and Freezers for Marine Use | |
| Outline of Investigation for Hydrogen Fuel Dispensing Systems | |
| OUTLINE OF INVESTIGATION FOR HYDROGEN GENERATORS USING WATER REACTION | |
| Outline of Investigation for Identification Tests for Jacket and Insulation Materials used in Plenum Cables | |
| OUTLINE OF INVESTIGATION FOR IGNITORS AND RELATED AUZILIARIES FOR HID LAMP BALLASTS | |
| Outline of Investigation for Impact Resistance of Roofing Systems | |
| Outline of Investigation for Irrigation Cables | |
| OUTLINE OF INVESTIGATION FOR IRRIGATION FEEDER, CONTROL, AND SIGNAL CABLES | |
| OUTLINE OF INVESTIGATION FOR LAUNDRY EQUIPMENT ACCESSORIES | |
| OUTLINE OF INVESTIGATION FOR LEAD (Pb) CONTENT VERIFICATION OF PRODUCTS IN CONTACT WITH POTABLE WATER | |
| OUTLINE OF INVESTIGATION FOR LIGHT-EMITTING DIODE (LED) RETROFIT LUMINAIRE CONVERSION KITS | |
| Outline of Investigation for Low Voltage Fuses - Class CD Fuses | |
| OUTLINE OF INVESTIGATION FOR LOW VOLTAGE FUSES \x96 CLASS CD FUSES | |
| OUTLINE OF INVESTIGATION FOR Low Voltage LED Wire | |
| OUTLINE OF INVESTIGATION FOR LOW-VOLTAGE FUSES \x96 FUSES FOR PHOTOVOLTAIC SYSTEMS | |
| OUTLINE OF INVESTIGATION FOR Low-Voltage Fuses \x96 Part 17: Class CF Fuses | |
| Outline of Investigation for Low-Voltage Fuses \x96 Part 20: Electric Vehicle (EV) Fuses | |
| OUTLINE OF INVESTIGATION FOR LOW-VOLTAGE SURGE WITHSTAND TELECOMMUNICATIONS OVERCURRENT PROTECTOR COMPONENTS | |
| OUTLINE OF INVESTIGATION FOR LP-GAS AUTOMOTIVE ACCESSORIES | |
| OUTLINE OF INVESTIGATION FOR LP-GAS CYLINDER ASSEMBLIES | |
| Outline of Investigation for Lp-Gas Fuel Hose and Hose Assemblies for Vehicle Engines | |
| OUTLINE OF INVESTIGATION FOR Manual and Semiautomatic Metal Sawing Machines | |
| OUTLINE OF INVESTIGATION FOR Marine Rigid and Flexible Air Ducting | |
| Outline of Investigation for Marking and Coding Equipment | |
| OUTLINE OF INVESTIGATION FOR MASONRY FIREPLACE ADAPTERS FOR RESIDENTIAL TYPE AND BUILDING HEATING APPLIANCE CHIMNEYS | |
| Outline of Investigation for Means of Escape, covers requirements for portable escape ladders for residential use | |
| OUTLINE OF INVESTIGATION FOR MECHANICAL PROTECTION TUBING | |
| OUTLINE OF INVESTIGATION FOR MEMBRANE SWITCHES | |
| Outline of Investigation for Metal Venting Systems for Household Clothes Dryers | |
| OUTLINE OF INVESTIGATION FOR METERS FOR DIESEL FUEL, BIODIESEL FUEL, DIESEL/BIODIESEL BLENDS WITH NOMINAL BIODIESEL CONCENTRATIONS UP TO 20 PERCENT (B20), KEROSENE, AND FUEL OIL | |
| OUTLINE OF INVESTIGATION FOR METERS FOR GASOLINE AND GASOLINE/ETHANOL BLENDS WITH NOMINAL ETHANOL CONCENTRATIONS UP TO 85 PERCENT (E0 \x96 E85) | |
| OUTLINE OF INVESTIGATION FOR MOBILE AND MODULAR STAGES | |
| Outline of Investigation for Mobile Home Pipe Heating Cable | |
| OUTLINE OF INVESTIGATION FOR MOTOR DRIVEN TURNSTILE OPERATORS AND SYSTEMS | |
| Outline of Investigation for Motorized Hose Reel Water Cabinets | |
| Outline of Investigation for Multi-Point Interconnenction Power Cable Assemblies for Industrial Machinery | |
| OUTLINE OF INVESTIGATION FOR MULTIOUTLET ASSEMBLIES | |
| OUTLINE OF INVESTIGATION FOR NON-THREADED CONNECTIONS FOR FIRE HYDRANTS AND FIRE DEPARTMENT CONNECTIONS | |
| Outline of Investigation for Nonmetallic Sheathed Cable Interconnects | |
| OUTLINE OF INVESTIGATION FOR NONSHIELDED CABLE | |
| Outline of Investigation for Oil/Water Separators | |
| OUTLINE OF INVESTIGATION For Optical Fiber Cable Routing Assemblies | |
| OUTLINE OF INVESTIGATION FOR OUTDOOR-USE INDUSTRIAL BATTERY CHARGERS | |
| Outline of Investigation for Outlet Branch Circuit Arc-Fault Circuit-Interrupters | |
| OUTLINE OF INVESTIGATION FOR OUTLINE OF INVESTIGATION FOR MULTI-DETECTOR TEST APPARATUS | |
| OUTLINE OF INVESTIGATION FOR OXYGEN-FUEL GAS COMBINATION FLASH ARRESTER AND BACK-PRESSURE CHECK VALVES | |
| OUTLINE OF INVESTIGATION FOR PART 2: LOW-VOLTAGE SURGE WITHSTAND TELECOMMUNICATIONS FUSES | |
| OUTLINE OF INVESTIGATION FOR PART 3: LOW-VOLTAGE SURGE WITHSTAND TELECOMMUNICATIONS POLYMER POSITIVE TEMPERATURE COEFFICIENT THERMISTOR (PPTC) | |
| OUTLINE OF INVESTIGATION FOR PART 5: LOW-VOLTAGE SURGE WITHSTAND TELECOMMUNICATIONS LINE FEED RESISTOR (LFR) | |
| OUTLINE OF INVESTIGATION FOR PART 6: LOW-VOLTAGE SURGE WITHSTAND TELECOMMUNICATIONS ELECTRONIC CURRENT LIMITERS (ECL) | |
| Outline of Investigation for Parts Cleaners | |
| OUTLINE OF INVESTIGATION FOR PELLET FUEL BURNING COOKING APPLIANCES | |
| OUTLINE OF INVESTIGATION FOR PENDANT CABLE | |
| Outline of Investigation for Personnel Electrostatic Control Devices | |
| Outline of Investigation for Personnel Protection Systems for Electric Vehicle (EV) Supply Circuits; Part 1: General Requirements | |
| OUTLINE OF INVESTIGATION FOR PHOTOVOLTAIC (PV) DC ARC-FAULT CIRCUIT PROTECTION | |
| Outline of Investigation for Pipe Joint Sealing Compounds Issue Number: 2 | |
| Outline of Investigation for Plastic Escutcheons for Sprinklers | |
| Outline of Investigation for Plastic Pipe and Fitting Assemblies used as Self-contained Automatic Extinguisher Units for Total Flooding Applications | |
| Outline of Investigation for Plate Warmers | |
| Outline of Investigation for Plugs, Recptacles and Couplers for Electric Vehicles | |
| Outline of Investigation for Polytetrafluoroethyl ene Plastic Tape, Seal Materials | |
| Outline of Investigation for Pool Pump Motors | |
| OUTLINE OF INVESTIGATION FOR PORTABLE ENGINE-GENERATOR ASSEMBLIES | |
| Outline of Investigation for Portable Power Cable | |
| Outline of Investigation for Portable Proton Exchange Membrane (PEM) Type Fuel Cell Power Plants with or without Uninterruptable Power Supply (UPS) Features and Portable Proton Exchange Membrane (PEM) Type Fuel... | |
| OUTLINE OF INVESTIGATION FOR PORTABLE WATER ELECTROLYSIS TYPE HYDROGEN GENERATORS | |
| Outline of Investigation for Power Cable Assemblies | |
| Outline of Investigation for Power Distribution Blocks | |
| Outline of Investigation for Power Distribution Centers for Communications Equipment | |
| OUTLINE OF INVESTIGATION FOR POWER-OPERATED CHEMICAL PUMPS | |
| OUTLINE OF INVESTIGATION FOR POWERED AND NON-POWERED CABINETS FOR USE IN SERVICE GARAGES | |
| Outline of Investigation for Pressure Relief Valves for Sprinkler Systems | |
| OUTLINE OF INVESTIGATION FOR PROTECTIVE KITCHEN APPAREL \x96 OVEN MITTS | |
| Outline of Investigation for Protective Shielding Guards for Plumbing | |
| Outline of Investigation for Pump Cable Submersed in Diesel Exhaust Fluid (DEF) | |
| OUTLINE OF INVESTIGATION FOR RACK MOUNTING SYSTEMS AND CLAMPING DEVICES FOR FLAT-PLATE PHOTOVOLTAIC MODULES AND PANELS | |
| OUTLINE OF INVESTIGATION FOR REBUILT FLAMMABLE LIQUID METERS | |
| Outline of Investigation for RECREATIONAL VEHICLE CABLE | |
| OUTLINE OF INVESTIGATION FOR REFRACTORY COMBUSTION CHAMBER LINERS | |
| OUTLINE OF INVESTIGATION FOR Refractory Panels For Masonry Fireplaces | |
| Outline of Investigation for Refrigerant Heat Recovery Units | |
| Outline of Investigation for Rescue Equipment | |
| Outline of Investigation for Residential Hose Cabinets | |
| Outline of Investigation for Residential Pipe Heating Cable | |
| Outline of Investigation for Restricted Use Substances in Metallic Components | |
| OUTLINE OF INVESTIGATION FOR RETROFIT MOTOR CONTROL CENTER UNITS FOR USE WITH SPECIFIED MOTOR CONTROL CENTER SECTIONS | |
| OUTLINE OF INVESTIGATION FOR RIDGE VENTS | |
| Outline of Investigation for Roof and Gutter De-Icing Cable Units | |
| Outline of Investigation for Rubber Hose for Radiant Heating | |
| Outline of Investigation for Rubber-Gasketed Fittings and Metallic Pipe for Commercial Cooking Equipment Protection Extinguishing System Units | |
| OUTLINE OF INVESTIGATION FOR SECURITY LATCH DEVICES | |
| OUTLINE OF INVESTIGATION FOR SELF-HOLDING PROTECTORS | |
| Outline of Investigation for Sheet Metal Air Ducts with Sealed Joints | |
| Outline of Investigation for Shutoff Valves for Trim and Drain Purposes | |
| Outline of Investigation for Solar Collectors | |
| OUTLINE OF INVESTIGATION FOR SOLID FUEL-FIRED WATER HEATERS AND BOILERS | |
| OUTLINE OF INVESTIGATION FOR SOLID STATE OVERCURRENT PROTECTORS | |
| Outline of Investigation for Special Purpose Nonmetallic Containers and Tanks for Specific Combustible or Noncombustible Liquids | |
| Outline of Investigation for Special Transformer Winding Wire | |
| OUTLINE OF INVESTIGATION FOR SPECIALTY PURPOSE RELOCATABLE POWER TAPS | |
| Outline of Investigation for Spray Nozzles for Fire Protection Service | |
| Outline of Investigation for Stationary and Semi-Portable Hand Hose Line Dry Chemical Extinguishing System Units | |
| OUTLINE OF INVESTIGATION FOR SUSPENDED CEILING GRID LOW VOLTAGE LIGHTING SYSTEMS | |
| OUTLINE OF INVESTIGATION FOR SWAY BRACE DEVICES FOR SPRINKLER SYSTEM PIPING | |
| OUTLINE OF INVESTIGATION FOR SWITCH-RATED PLUGS AND RECEPTACLES | |
| OUTLINE OF INVESTIGATION FOR Tamper Resistant Features of Hydrants for Fire-Protection Service | |
| Outline of Investigation for Tanks for Oil Burner Fuel - Non-Metallic | |
| OUTLINE OF INVESTIGATION FOR TEMPORARY PANELBOARD INGRESS BARRIERS | |
| Outline of Investigation for Tests for Ampacity of Insulated Electrical Conductors Installed in the Fire Protective System | |
| Outline of Investigation for Thermoplastic Sprinkler Pipe and Fittings for Low Pressure Dry Pipe Applications | |
| OUTLINE OF INVESTIGATION FOR TRANSFER SWITCH EQUIPMENT, METER MOUNTED | |
| OUTLINE OF INVESTIGATION FOR TRANSFER SWITCH EQUIPMENT, OVER 600 VOLTS | |
| OUTLINE OF INVESTIGATION FOR UL Standards for Safety HYGIENIC DESIGN AND CONSTRUCTION OF RESIDENTIAL FOOD HEATING AND COOKING APPLIANCES | |
| Outline of Investigation for Ultraviolet Curing Equipment for Commercial Use | |
| OUTLINE OF INVESTIGATION FOR UNDERGROUND FUEL TANK INTERNAL RETROFIT SYSTEMS | |
| OUTLINE OF INVESTIGATION FOR UNDERGROUND LOW-ENERGY CIRCUIT CABLE | |
| OUTLINE OF INVESTIGATION FOR UNITARY BOILER ROOM SYSTEMS | |
| Outline of Investigation for Unvented Alcohol Fuel Burning Decorative Heating Appliances | |
| OUTLINE OF INVESTIGATION FOR US NAVAL COMMERCIAL OFF THE SHELF (COTS) DESIGNATED THREE-POLE LOW-VOLTAGE AC POWER CIRCUIT BREAKERS, DRAWOUT-MOUNTED TYPE, AND ACCESSORIES/FUNCTION AL COMPONENTS FOR USE ON NON-NUCLEAR NAVAL COMBATANT... | |
| OUTLINE OF INVESTIGATION FOR VARIABLE SPEED PRESSURE LIMITING CONTROLS INSTALLED WITH DIESEL ENGINES FOR DRIVING STATIONARY FIRE PUMPS | |
| OUTLINE OF INVESTIGATION FOR VENTING SYSTEMS FOR USE WITH GAS-FIRED DIRECT VENT APPLIANCES | |
| OUTLINE OF INVESTIGATION FOR Video Image Smoke Detectors | |
| OUTLINE OF INVESTIGATION FOR WALL AND CEILING MOUNTS AND ACCESSORIES | |
| Outline of Investigation for Water-Based Automatic Extinguisher Units | |
| Outline of Investigation for Welding Cable | |
| Outline of Investigation for Wire-Pulling Compounds | |
| Plain and Reinforced Concrete Specification | |
| PRESSURE INDUCED FATIGUE | |
| PRINCIPLES OF SAFETY AND PERFORMANCE FOR MEDICAL HYPERBARIC CHAMBERS: GUIDELINES FOR REGULATORY SUBMISSION | |
| Project Weight Management for Onshore Modules Specification | |
| PROPERTIES FOR COMPOSITE MATERIALS IN HYDROGEN SERVICE | |
| PROTECTION OF ELECTROSTATIC DISCHARGE SUSCEPTIBLE ITEMS - IONIZATION | |
| Protection of Electrostatic Discharge Susceptible Items Worksurfaces \x96 Resistance Measurements (Including Shelving and Mobile Equipment) | |
| REFERENCE STRESS SOLUTIONS FOR THICK-WALL CYLINDERS | |
| REGULATORY SAFETY ISSUES IN THE STRUCTURAL DESIGN CRITERIA OF ASME SECTION III SUBSECTION NH For Very High Temperatures for VHTR & Gen IV | |
| REVIEW OF SAFETY CONSIDERATIONS FOR NATURAL GAS PIPELINE BLOCK VALVE SPACING | |
| RISK INITIATIVES IN ASME NUCLEAR CODES AND STANDARDS | |
| ROADMAP FOR THE DEVELOPMENT OF ASME CODE RULES FOR FUSION ENERGY DEVICES | |
| ROADMAP TO DEVELOP ASME CODE RULES FOR THE CONSTRUCTION OF HIGH TEMPERATURE GASCOOLED REACTORS (HTGRS) | |
| Security in Telecommunications and Information Technology | |
| Seize the Sky, A Beginners Guide to Model Rocketry | |
| Service Technician Training Manual Level I | |
| Service Technician Training Manual Level II | |
| SMALL MODULAR REACTOR (SMR) ROADMAP | |
| Standard Terminology of Powder Metallurgy | |
| Steam Plant Operation, Ninth Edition | |
| STEEL STACKS | |
| Steels: Processing, Structure, and Performance | |
| STRESS INTENSIFICATION FACTOR, K-FACTOR, AND SUSTAINED STRESS INDEX DEVELOPMENT \x96 PHASE II | |
| STRESS INTENSITY FACTOR AND K-FACTOR ALIGNMENT FOR METALLIC PIPES | |
| STRESS INTENSITY FACTOR SOLUTIONS FOR INTERNAL CRACKS IN THICK-WALLED CYLINDER VESSELS | |
| STRESS INTENSITY K FACTORS FOR EXTERNAL SURFACE CRACKS IN THICK-WALLED CYLINDER VESSELS | |
| Structural Analysis and Design of Process Equipment 2nd Edition | |
| Structural Design for Fire Safety | |
| Structural Design for Physical Security State of the Practice | |
| STRUCTURAL DESIGN OF AIR AND GAS DUCTS FOR POWER STATIONS AND INDUSTRIAL BOILER APPLICATIONS | |
| STRUCTURAL DYNAMICS: FUNDAMENTALS AND ADVANCED APPLICATIONS VOLUME II | |
| Structural Steel Designer's Handbook, Fifth Edition | |
| STRUCTURE OF THE Q.1000-SERIES RECOMMENDATIONS FOR PUBLIC LAND MOBILE NETWORKS | |
| Studies of the Design of Steel Castings and Steel Weldments as Related to Methods of Their Manufacture (Castings vs. Weldments) | |
| SUBJECT 2436 OUTLINE OF INVESTIGATION FOR SPILL CONTAINMENT FOR STATIONARY LEAD ACID BATTERY SYSTEMS | |
| Supplier Weight Management for Onshore Modules Specification | |
| Surface Resistance Measurement of Static Dissipative Planar Materials | |
| TEMPER BEAD QUALIFICATION HARDNESS ACCEPTANCE CRITERIA | |
| The Entry-Level Service Technician Training Course | |
| The Protection of Electrostatic Discharge Susceptible Items \x96 Garments | |
| The Protection of Electrostatic Discharge Susceptible Items Floor Materials Characterization of Materials | |
| The Protection of Electrostatic Discharge Susceptible Items Seating - Resistance Measurements | |
| The Stroke Center Handbook: Organizing Care for Better Outcomes | |
| THERMOPHYSICAL PROPERTIES OF WORKING GASES USED IN WORKING GAS TURBINE APPLICATIONS | |
| Two Point Resistance Measurement | |
| UL Outline for Investigation AIR DISPERSION SYSTEM MATERIALS | |
| UL Outline for Investigation Corrugated Medical Tubing (CMT) Systems | |
| UL Outline for Investigation Dry Type Transformer Insulation Systems Rated Above 1 kV | |
| UL Outline for Investigation Electrical Systems for Self-Balancing Scooters | |
| UL Outline for Investigation Fault-Managed Power Systems \x96 Part 1: Safety Requirements | |
| UL Outline for Investigation Fire Resistant Pipe Protection Systems Carrying | |
| UL Outline for Investigation Fire Testing of Specific Application Sprinklers for Use on Windows | |
| UL Outline for Investigation Flexible Motor Supply Cable and Wind Turbine | |
| UL Outline for Investigation For [Prefabricated Assemblies] Wiring Assemblies | |
| UL Outline for Investigation for Cable for Use in Mobile Installations | |
| UL Outline for Investigation for Electric Vehicle Cable for Use in High Power, DC Systems | |
| UL Outline for Investigation for Fire Testing Of Specific Application Sprinklers For Use In Horizontal Concealed Spaces | |
| UL Outline for Investigation FOR FIRE TESTS FOR FIRE PROTECTIVE CURTAINS | |
| UL Outline for Investigation for Flexible Bus Systems | |
| UL Outline for Investigation Hose Nozzle Valves for Diesel Exhaust Fluid | |
| UL Outline for Investigation In-building 2-Way Emergency Radio Communication Enhancement Systems | |
| UL Outline for Investigation In-Building Auxiliary Radio Communication | |
| UL Outline for Investigation Insulated Bus Pipe | |
| UL Outline for Investigation LP-Gas Vaporizers | |
| UL Outline for Investigation Megawatt Charging Configured Electric Vehicle | |
| UL Outline for Investigation Nozzle Adaptors with Integral Filter for Fire Protection Service | |
| UL Outline for Investigation Plant Extraction Units | |
| UL Outline for Investigation Safety of Power Banks | |
| UL Outline for Investigation Seasonal Use Modular Trees | |
| UL Outline for Investigation SPECIFIC APPLICATION EARLY-SUPPRESSION FAST-RESPONSE (ESFR) PENDENT SPRINKLERS HAVING A NOMINAL DISCHARGE COEFFICIENT OF 28.0. | |
| UL Outline for Investigation Sprinkler Systems Wire | |
| UL Outline for Investigation Sustainability for Portable Electronic Products | |
| UL Outline for Investigation Sustainability Outline for Portable Rechargeable Batteries and Portable Chargers | |
| UL Outline of Investigation for Active and Passive Optical Cable Assemblies and Connectors | |
| UL Outline of Investigation for Adapters for use with Electric Vehicle Couplers | |
| UL Outline of Investigation for Cryogenic Submersible Pump Cable | |
| UL OUTLINE OF INVESTIGATION FOR DRY SYSTEM WATER DELIVERY TIME CALCULATION PROGRAMS | |
| UL Outline of Investigation for Electric Vehicle (EV) Surge Protective Devices | |
| UL Outline of Investigation for Electrical Systems for Construction, Agriculture, and Mining Vehicles | |
| UL Outline of Investigation for Elevator Trailing Cable Support Hardware | |
| UL Outline of Investigation for Factory Automation Equipment | |
| UL Outline of Investigation for Fault-Managed Power Systems | |
| UL Outline of Investigation for Fire Testing Specific Application Horizontal Sidewall Sprinklers for Installation in Racks Having Vertical and Horizontal | |
| UL Outline of Investigation for Flashing Devices and Systems for Rooftop-Mounted Photovoltaics | |
| UL Outline of Investigation for Flexible Insulated Bus | |
| UL Outline of Investigation for Hydraulic Surge Suppressors for Water Based Fire Protection Systems | |
| UL Outline of Investigation for Immersion Cooling Fluids for Use with Information and Communication Technology Equipment | |
| UL Outline of Investigation for Leakage Current Measurement Devices for Use | |
| UL Outline of Investigation for Non-Metal Joining Accessories for Flexible Air Ducts and Air Connectors | |
| UL Outline of Investigation for Source Interconnection Switches | |
| UL Outline of Investigation for Stage and Lighting Cables | |
| UL OUTLINE OF INVESTIGATION FOR SYSTEM CONTROL BALL VALVES FOR FIRE PROTECTION SERVICE | |
| UL Outline of Investigation for Targeting Water Mist System Units for One- and Two-Family Dwellings for Fire Protection Service | |
| UL Outline of Investigation for Test Method for Materials for Use in Transportation Applications: Surface Tracking Test (STT) Method | |
| UL Outline of Investigation for Thermistor-Type Devices for Use in Electric | |
| UL Outline of Investigation for Tubular Cable Support Systems | |
| UL Outline of Investigation for Water Electrolysis Type Hydrogen Generators | |
| UL Outline of Investigation for Welded Outlet Fittings | |
| UL Standard for Safety OUTLINE OF INVESTIGATION FOR FIRE TESTING OF SPECIFIC APPLICATION SPRINKLERS FOR USE IN ATTIC SPACES | |
| UL standard for safety OUTLINE OF INVESTIGATION FOR SHATTER CONTAINMENT OF LAMPS FOR USE IN REGULATED FOOD ESTABLISHMENTS | |
| UL Standard for Saftey Outline of Investigation for Watertightness of Firestop Systems and Fire Resistive Joints for Building Structures | |
| UNIT HEATER, AIR-CIRCULATING, STEAM - HOT WATER | |
| UPDATE AND IMPROVE SUBSECTION NH \x96 ALTERNATIVE SIMPLIFIED CREEP-FATIGUE DESIGN METHODS | |
| UPDATE AND IMPROVE SUBSECTION NH \x96 SIMPLIFIED ELASTIC AND INELASTIC DESIGN ANALYSIS METHODS | |
| VERIFICATION OF ALLOWABLE STRESSES IN ASME SECTION III SUBSECTION NH FOR ALLOY 800H | |
| VERIFICATION OF ALLOWABLE STRESSES IN ASME SECTION III SUBSECTION NH FOR GRADE 91 STEEL | |
| Vertical Vessel Foundation Design Guide | |
| Vessel Circular Platform Detail Guidelines | |
| Vessel Circular Platform Details | |
| Volume Resistance Measurement of Static Dissipative Planar Materials | |
| YIELD STRENGTH VALUES UP TO MAXIMUM TEMPERATURE DESIGN |
| << Prev | Next >> |