Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
1000
1150
1200
1250
1300
1350
1400
1440
1450
1460
1470
1480
1490
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1510
1520
1530
1540
1550
1560
1600
1620
| Product Name | Notes |
|---|---|
| (RESTRICTED) 40 x 255 mm CASED TELESCOPED AMMUNITION - AEP-4749 EDITION A | |
| (RESTRICTED) ASSESSMENT GUIDES FOR THE PROVISION OF FIRE SERVICES DURING DEPLOYED OPERATIONS | |
| (RESTRICTED) CELLULAR INHIBITION EFFECTIVENESS TESTING FOR COUNTERING RCIED - AEP-4849 EDITION A | |
| (RESTRICTED) ELECTROMAGNETIC INTERFERENCE, TEST METHODS FOR AEROSPACE GROUND EQUIPMENT | |
| (RESTRICTED) LIQUID OXYGEN TRANSPORTATION BY MILITARY AIRCRAFT \x96 SAFETY AND TECHNICAL REQUIREMENTS | |
| (RESTRICTED) NATO HUMINT OPERATOR ENSEMBLE TOOLSET (NHOET) - AEDP-4863 EDITION A | |
| (RESTRICTED) NATO INTEROPERABLE DISMOUNTED BATTERY CHARGING INTERFACE - AEP-4819 EDITION A | |
| (RESTRICTED) NATO STANDARD METHOD FOR AIRFIELD PAVEMENT CONDITION INDEX (PCI) SURVEYS - AEP-56 | |
| (RESTRICTED) PLANNING GUIDELINES FOR FIRE AND EMERGENCY SERVICES RESPONSE TO MAJOR FIRE AND EMERGENCY INCIDENTS | |
| (RESTRICTED) SHIP COMBAT RECOVERABILITY - ANEP-68 EDITION A | |
| (RESTRICTED) SHIP COMBAT SURVIVABILITY \x96 ANEP-43 EDITION C | |
| (RESTRICTED) STANDARIZATION OF PHYSICAL FITNESS MAINTENANCE PROGRAM FOR FIRE-FIGHTERS | |
| (RESTRICTED) SUPPLEMENT 1 A LA PUBLICATION DOCTRINE ET PROCEDURES LOGISTIQUES DES FORCES AERIENNES - ALP-4.3.1 \xc9DITION B | |
| (RESTRICTED) The Minimum Crash, Fire-Fighting and Rescue (CFR) Equipment Standards for Aviation Capable Vessels | |
| (RESTRICTED) USE OF 95 GHz MILLIMETRE WAVE TECHNOLOGY FOR NON-LETHAL COUNTER-PERSONNEL APPLICATIONS - AEP-4854 EDITION A | |
| AAMI STERILIZATION STANDARDS BOOK COLLECTION | |
| Abbreviations and Designations. General Rules | |
| Abbreviations and Designations. Technical | |
| ADDITIONAL MILITARY LAYERS (AML) - DIGITAL GEOSPATIAL DATA PRODUCTS | |
| Additively Manufactured Metallic Components for Use in the Petroleum and Natural Gas Industries | |
| Additively Manufactured Polymer-based Components for Use in the Petroleum and Natural Gas Industries | |
| Adhesion of surface coating of leather Testing method | |
| Adhesive - General introduction | |
| ADVANCED DATA STORAGE TECHNOLOGY MEMORY SYSTEMS SANITIZATION GUIDE | |
| AEROSPACE MEDICINE DOCTRINE | |
| AIR TRANSPORT (AT) AND AIR-TO-AIR REFUELLING (AAR) DOCTRINE | |
| AIR-TO-AIR (AERIAL) REFUELLING EQUIPMENT: BOOM-RECEPTACLE SYSTEM AND INTERFACE REQUIREMENTS | |
| AIR-TO-AIR REFUELLING SIGNAL LIGHTS IN HOSE AND DROGUE SYSTEMS | |
| AIRPORT EQUIPMENT MARKING FOR FUEL IDENTIFICATION | |
| ALL-WELDED PRODUCTION TANKS (Tentative) | |
| American National Standard for Ammonia Refrigeration Valves | |
| American National Standard for Definitions and Terminology Used in IIAR Standards | |
| American National Standard for Developing Operating Procedures for Closed-Circuit Ammonia Mechanical Refrigerating Systems | |
| American National Standard for Minimum System Safety Requirements for Existing Closed-Circuit Ammonia Refrigeration Systems | |
| American National Standard for the Inspection, Testing, and Maintenance of Closed-Circuit Ammonia Refrigeration Systems | |
| American National Standard for the Startup of Closed-Circuit Ammonia Refrigeration Systems | |
| ANALYSIS FOR NATURAL GAS AND SIMILAR GASEOUS MIXTURES BY GAS CHROMATOGRAPHY | |
| Analysis of Natural Gas Liquid Mixtures by Gas Chromatography | |
| ANALYSIS OF NATURAL GAS LIQUIDS BY GAS CHROMATOGRAPHY | |
| Approval of Dimensional Deviation | |
| AQAP CERTIFICATION/CONFIR MATION - HARMONISATION OF NATIONAL QUALITY ASSURANCE AUTHORITY PROCESSES | |
| Assembly Instructions | |
| Assessment of sealing quality Anodic oxidation coatings on aluminium Testing method | |
| Assessment of smell resulting from the effects of moisture Testing Method | |
| AUTOMATED AIR-TO-AIR REFUELLING (A3R) | |
| Aviation Fueling Hose | |
| Aviation Safety - AFSP-1(A) | |
| AVOIDANCE OF COUNTERFEIT MATERIEL IN THE DEFENCE SUPPLY CHAIN | |
| Basic requirements for polymeric materials and interior materials Zone E1 - Interior surfaces not exposed to sunlight. Floor up to sill. | |
| Basic requirements for polymeric materials and interior materials Zone E2 - Interior surfaces not exposed to sunlight. Sill. | |
| Basic requirements for polymeric materials and interior materials Zone E3 - Interior surfaces exposed to sunlight. From sill to headlining. | |
| BELTING SPECIFICATIONS | |
| BIBLIOGRAPHY ON ELECTROMAGNETIC COMPATIBILITY (EMC) | |
| Bid Form Mechanical Draft Cooling Tower | |
| BIOLOGICAL WARFARE AGENT CHALLENGE LEVELS | |
| Blast Resistant Building Design Criteria | |
| Blind Rivets | |
| Buckle tear load. Leather Testing method | |
| Cable harnesses Electrics in vehicles Drawing rules | |
| Cable harnesses Electrics in vehicles General requirements | |
| Cable Terminal Connection dimensions | |
| Cable terminal Pin with moisture proofing housing of propene plastic | |
| Cable terminal, ring type Material: Brass; Tinned | |
| Cable Terminal | |
| Cable tie. For weld pin. Openable | |
| Cage nut | |
| CALCULATION OF GROSS HEATING VALUE, RELATIVE DENSITY, COMPRESSIBILITY AND THEORETICAL HYDROCARBON LIQUID CONTENT FOR NATURAL GAS MIXTURES FOR CUSTODY TRANSFER | |
| CALIBRATING TANK-CAR TANKS and MEASURING, SAMPLING, AND CALCULATING TANK-CAR QUANTITIES (NONPRESSURE-TYPE TANK CARS) | |
| Cardboard products (excl. corrugated types) Testing regulations | |
| Caution Statement on Heat Fusion Joining of Polyethylene Pipe And Fittings Based On Color | |
| Classification and marking of inflammable liquids | |
| Clip Nuts. ST-Thread | |
| Closed Die Forgings for Use in the Petroleum and Natural Gas Industry | |
| Cold Rolled Steel Strip. Dimensions and Tolerances | |
| Cold worked round steel bar | |
| COLLECTING AND HANDLING OF NATURAL GAS SAMPLES FOR ANALYSIS BY GAS CHROMATOGRAPHY | |
| COLLECTIVE PROTECTION (COLPRO) IN A CHEMICAL, BIOLOGICAL, RADIOLOGICAL AND NUCLEAR (CBRN) ENVIRONMENT | |
| Colour Fastness Testing Method | |
| Colour fastness to perspiration. Leather Testing method | |
| COMBAT CLOTHING PERFORMANCE AND PROTECTIVE PROPERTIES AND TRIAL GUIDANCE | |
| Combustibility. Testing Method | |
| Completeness. Drawings and Math Data in CATIA | |
| Compressed glass fibre Testing regulations | |
| CONDUCT AFTER CAPTURE (CAC) TRAINING | |
| Contact stain, PVC-leather Testing method | |
| Contractor Safety Performance Process | |
| Coolant corrosion test in a glass beaker Testing method | |
| Cooling Tower Filament Wound Fiberglass Piping Systems | |
| Coordinate System for Cars. Drawings in Other Systems than UG | |
| Corrosion Protecting Coatings. Chromates/Zn,Al/Inor ganic Type | |
| Corrosion Testing Procedures Corrosion Coupon Testing and Test Devices | |
| CRUDE-OIL TANK MEASUREMENT AND CALIBRATION | |
| Decommissioning of Closed-Circuit Ammonia Refrigeration Systems | |
| Deep drawing agent Testing regulations | |
| DEMONSTRATING AIRCRAFT E3 TOLERANCE TO PORTABLE ELECTRONIC DEVICES (TRANSMITTING AND NON-TRANSMITTING) | |
| DESIGN AND CONSTRUCTION OF EHTANE AND ETHYLENE INSTALLATIONS AT MARINE AND PIPELINE TERMINALS, NATURAL GAS PROCESSING PLANT, REFINERIES, PETROCHEMICAL PLANTS, AND TANK FARMS | |
| Design and Construction of LPG Installations | |
| Design and Manufacture of Subsea Well Intervention Equipment | |
| Design, Construction, Operation, Maintenance, and Inspection of Terminal & Tank Facilities | |
| Determination of Amine Quantity in cathodic EC Testing Method | |
| Determination of compression set Rubber Testing method | |
| Determination of Conductivity Testing Method | |
| Determination of cracking Testing method | |
| Determination of crevice penetration Method of testing | |
| Determination of density with a pycnometer Testing method | |
| Determination of density with an areometer Testing method | |
| Determination of Dry Content Testing Method | |
| Determination of flashpoint in Pensky-Marten s apparatus Testing method | |
| Determination of gliding of underbody coating Testing method | |
| Determination of Hydrogen Sulfide and Mercaptan Sulfur in Natural Gas (Cadmium Sulfate-Iodometric Titration Method) | |
| Determination of mass of coating on aluminium coated steel Testing method | |
| Determination of pH-value Testing Method | |
| Determination of shrinkage Textile materials. Testing method | |
| Determination of Specific Sulfur Compounds by Capillary Gas Chromatography and Sulfur Chemiluminescence Detection | |
| Determination of spreading rate Testing method | |
| Determination of tear strength of textiles Testing method | |
| Determination of tensile strength Textile materials. Testing method | |
| Determination of the compatibility with anti-corrosion agents for after-market purposes Method of testing | |
| Determination of the viscosity by means of a pressurised flow rheometer Method of testing | |
| Determination of viscosity and thixotropy Testing method | |
| Determination of volumetric change after curing Test method | |
| Determiniation of water resistance in coloured textiles Testing method | |
| Determining flashpoint in Abel-Pensky's apparatus with aggitator Testing method | |
| Determining the viscosity of opaque liquids with a capillary viscosimeter according to the Cannon-Fenske method Testing method | |
| Diffusion tightness - Petrol hose Testing method | |
| DIMENSIONAL SPECIFICATIONS FOR STANDARD BOLTED TANKS | |
| DIMENSIONAL STANDARDS FOR CABLE DRILLING TOOL JOINTS | |
| Dimensioning of Cones | |
| Dimensioning. General Principles and Methods. Drawings in Other Systems than UG | |
| Documentation Parts. Handling at Suppliers. Car Projects Where Requirement Classes Apply | |
| Documentation Parts. Handling Within Saab Automobile AB. Car Projects Where Requirement Classes Apply | |
| Double adhesive tape Testing regulations | |
| Drawing Forms for Product Drawings. Drawings in Other Systems than UG | |
| Drawing Rules for Thin-Walled Designs | |
| Drawn round steel spring wire | |
| Drawn round steel wire Tolerances on diameter | |
| Drawn round steel wire | |
| Dynamic Risers for Floating Production Systems | |
| Electric cable, choice of area Design instruction | |
| Electrical connections in vehicles Requirements and testing | |
| Electrolytic Nickel-Alloyed Zinc Coatings On Steel | |
| Electrolytic tin coatings | |
| Electrolytic Zinc Coatings On Steel | |
| Electronic Entry Data Sheets for Blast Resistant Building Design | |
| ENGINEERING IN NATO PROGRAMMES | |
| Environmental zoning of a car | |
| Factors for Volume Correction and Specific Gravity Conversion of Liquefied Petroleum Gases | |
| Fiberglass Pultruded Structural Products for Use in Cooling Towers | |
| FIELD ERECTED COOLING TOWER SPECIFICATION | |
| Flange-screw, taptite | |
| Foam plastic and foam rubber Testing regulations | |
| Foam plastic for crash padding Testing regulations | |
| FORCE PROTECTION DOCTRINE FOR AIR OPERATIONS | |
| Four-Inch Hydrant System Components and Arrangements | |
| FRP Fan Stack Material | |
| Fuels - General introduction | |
| Functional stiffness of mouldings Testing Metod | |
| Fundamental Tolerancing Principle. Drawings in Other Systems Than UG | |
| Gaging Petroleum and Petroleum Products, Method of | |
| Gear Speed Reducers for application on Air Cooled Condensers | |
| Gear Speed Reducers for application on Industrial Water Cooling Towers | |
| Gelation test. Determination of the gelation tendencies of textile-backed PVC plastic Testing Method | |
| General testing and inspection regulations | |
| Geometrical Tolerances for Thin-Walled Designs | |
| Glossary Definition of Words and Terms Used in the Gas Processing Industry | |
| GPA Fractionation Grade Product Specifications | |
| GUIDANCE FOR DEPENDABILITY MANAGEMENT | |
| GUIDANCE FOR MODELLING AND SIMULATION STANDARDS IN NATO AND MULTINATIONAL COMPUTER ASSISTED EXERCISES WITH DISTRIBUTED SIMULATION | |
| GUIDANCE FOR STANDARDS APPLICABLE TO THE DEVELOPMENT OF NEXT GENERATION NATO REFERENCE MOBILITY MODELS (NG-NRMM) | |
| GUIDANCE FOR THE NEGOTIATION AND DRAFTING OF INTERNATIONAL CO-OPERATIVE ARMAMENTS ARRANGEMENTS (MEMORANDA OF UNDERSTANDING (MOUs) AND PROGRAMME MOUs) | |
| GUIDANCE ON SENSE AND AVOID FOR UNMANNED AIRCRAFT SYSTEMS | |
| Guideline On Big Data/Digital Transformation Workflows and Applications for the Oil and Gas Industry | |
| GUIDELINES FOR MUTUAL PROVISION OF CONTRACT AUDITS | |
| Guidelines for Safe Work in Inert Confined Spaces in the Petroleum and Petrochemical Industries | |
| HANDBOOK (BEST PRACTICE) FOR COMPUTER ASSISTED EXERCISES | |
| Harness tape Required characteristics and testing | |
| Heat forming properties Pressure/heat adhesive mat Testing method | |
| Heat Treatment Services-Batch Type for Equipment Used in the Petroleum and Natural Gas Industry | |
| Heat Treatment Services\x97Batch Type for Equipment Used in the Petroleum and Natural Gas Industry | |
| Heat Treatment Services\x97Continuo us Line for Equipment Used in the Petroleum and Natural Gas Industry | |
| Heat-bonded bitumen mat Testing Regulations | |
| Hexagon Head Tapping Screws With Captive Washer | |
| Hexagon Head Thread Forming Screws With Flange, For Plastics | |
| Hexagon Head Thread Forming Screws With Flange | |
| Hexagon Nut | |
| Hexagon Nuts With Flange | |
| Hexagon Nuts with Movable Plain Washer | |
| Hexagon Screw, Type M6S | |
| Hexagon Screws With Captive Washer and Entry Dog | |
| Hexagon Screws With Captive Washer | |
| Hexagon Screws With Flange | |
| Hexagon Screws, Fully-Threaded. Metric Thread, Coarse Pitch | |
| High current fuse tab type | |
| Hollow steel bars for machining Steel 2172 | |
| Hot Rolled Round Steel Bar. Dimensions and Tolerances | |
| Hot rolled round steel wire | |
| Hot worked flat bar Steel 1311 | |
| HUMAN SYSTEMS INTEGRATION GUIDANCE FOR UNMANNED AIRCRAFT SYSTEMS | |
| In-line Inspection Systems Qualification Standard | |
| Indented Markings | |
| INITIAL INVESTIGATION AND IMMEDIATE MANAGEMENT OF LASER EYE DAMAGE IN AIRCREW | |
| Inorganic Surface Treatment. Design Instructions | |
| Ins. Hexagon Screw, Cyl. Head Type MC6S | |
| Inspection regulation Cellular plastics | |
| Installation of Closed-Circuit Ammonia Refrigeration Systems | |
| INSTALLATION, OPERATION, MAINTENANCE, INSPECTION, AND REPAIR OF TANKS IN PRODUCTION SERVICE | |
| Interior Lining and Periodic Inspection of Underground Storage Tanks | |
| INTERNATIONAL SPECIFICATION FOR TECHNICAL PUBLICATIONS USING A COMMON SOURCE DATABASE | |
| Leather Testing regulations | |
| Lettering of Drawings. Drawings in Other Systems than UG | |
| LIQUIFIED PETROLEUM GAS SPECIFICATIONS AND TEST METHODS | |
| List of Parts with Compulsory Marking | |
| LOAD EFFECTS ASSESSMENT PROGRAM (LEAP) | |
| Loading and compression testing Cushion and squab platforms Testing method | |
| LOW BURDEN CHEMICAL, BIOLOGICAL, RADIOLOGICAL AND NUCLEAR (CBRN) PROTECTIVE CLOTHING | |
| Low Viscosity Anti-Corrosion Oil. Testing Regulations | |
| Lubricants - General introduction | |
| Magnetic force of structure-borne sound insulating materials Testing method | |
| Making of Parts | |
| Managing System Integrity for Hazardous Liquid Pipelines | |
| Manual of Petroleum Measurement Standards Chapter 14 _ Naturla Gas Fluids Measurement Section 3 - Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids | |
| Marking of parts made of polymeric materials | |
| Master Location System. Drawings in Other Systems than UG | |
| Material Summaries. Rubber, Cellular Rubber/TPE | |
| Material Summaries. Rubber, General Purposes | |
| Material Summaries. Rubber, Semi-Manufactured Products | |
| Measurement and Calibration of Spheres and Spheroids, Method for | |
| Measurement and Calibration of Tank Cars, Method for | |
| MEASUREMENT OF AND SPECIFICATIONS FOR PROPPANTS USED IN HYDRAULIC FRACTURING AND GRAVEL-PACKING OPERATIONS | |
| Measurement of Liquid Hydrocarbons by Turbine Meter Systems | |
| Measuring thickness Testing Method | |
| MEASURING, SAMPLING, AND CALCULATING TANK CAR QUANTITIES AND CALIBRATING TANK CAR TANKS (PRESSURE-TYPE TANK CARS) | |
| MEASURING, SAMPLING, AND TESTING CRUDE OIL Part V-Automatic Line Samplers | |
| MECHANICAL DISPLACEMENT METER PROVERS | |
| Medium fuse tab type | |
| Method for Liquid Calibration of Tanks (ASTM D1406-65) (R 1992) | |
| Method for the Analysis of Natural Gas Condensate Mixtures Containing Nitrogen and Carbon Dioxide by Gas Chromatography | |
| Method for the Extended Analysis of Hydrocarbon Liquid Mixtures Containing Nitrogen and Carbon Dioxide by Temperature Programmed Gas Chromatography | |
| Method for the Physical Determination of Volume and Composition of Flash Gas Liberation from Pressurized Liquid Hydrocarbon Samples | |
| Method of Measurement and Calibration of Upright Cylindrical Tanks | |
| Method of Measuring the Temperature of Petroleum and Petroleum Products | |
| Microplastics and Plastic Piping for Potable Water | |
| MILITARY BRIDGING AND GAP-CROSSING EQUIPMENT DESIGN AND TEST CODE | |
| MINIMUM REQUIREMENTS FOR FLIGHT SURGEON TRAINING | |
| MISCELLANEOUS A.P.I PUMPING EQUIPMENT STANDARDS (Tentative) | |
| MULTIPLE INPUT MULTIPLE OUTPUT (MIMO) ELECTRONIC COUNTERMEASURE TESTING PROCEDURES | |
| NATO EDUCATION AND TRAINING NETWORK FEDERATION ARCHITECTURE AND FEDERATION OBJECT MODEL DESIGN | |
| NATO GUIDANCE ON UNIQUE IDENTIFICATION OF ITEMS | |
| NATO INTELLIGENCE, SURVEILLANCE, AND RECONNAISSANCE INTEROPERABILITY ARCHITECTURE | |
| Nato Message Catalogue (NMC) - App-11 | |
| NATO MODELLING AND SIMULATION STANDARDS PROFILE | |
| NATO PREFERRED METHODS FOR ACCEPTANCE OF PRODUCT | |
| NATO REMOTELY PILOTED AIRCRAFT SYSTEMS (RPAS) AIRSPACE INTEGRATION (AI) | |
| Natural Gasoline Specifications and Test Methods | |
| NAVAL SHIP CODE | |
| Non-Hardening Sealing Agent. Testing Regulations | |
| Obtaining Liquid Hydrocarbon Samples for Analysis by Gas Chromatography | |
| Offshore Cargo Carrying Units | |
| One-sided water absorption (Cobb-test) Testing method | |
| Operating 90 \xb0C and 105 \xb0C Rated Cables with HDPE Conduit | |
| Operations Manual for Thermal Performance Certification of Evaporative Heat Rejection Equipment | |
| Oven Hardening Seal Agent. Testing Regulations | |
| Overfill Protection for Storage Tanks in Petroleum Facilities | |
| OVERVIEW OF COMPATIBILITY TRIAL PROCEDURES FOR ELECTRONIC COUNTERMEASURES AGAINST RADIO CONTROLLED IMPROVISED EXPLOSIVE DEVICES | |
| Paint and enamel Determination of colour Testing method | |
| Paint and varnish Assessment of adhesion by means of a knife edge Method of testing | |
| Paint and varnish Determination of the electrical resistance of paint and varnish Method of testing | |
| Paint and varnishes. Assessment of run and hiding power and the tendency of cracking for paint/varnishes applicated on sealing compounds. Method of testing | |
| Paint protector. Testing regulations | |
| Paint. Testing Regulations | |
| Painting of car bodies Paint system and paint quality | |
| Paints and varnishes Determination of flow time by the ISO flow cup Testing method | |
| Paints and varnishes Determination of layer thickness on metal surface using electromagnetic instruments Testing method | |
| Paints and varnishes. Determination of hardness, K\xf6nig pendulum Testing method | |
| Performance Rating of Evaporative Heat Rejection Equipment | |
| Permeation in Plastic Pipe Used for Potable Water | |
| Petroleum Test Laboratory Accreditation Program | |
| PFAS Chemicals and Plastic Piping for Potable Water Transport | |
| Phosphate Coatings on Steel | |
| Pierce Nuts | |
| Pin for cable terminal Material: Brass | |
| Pipeline SCADA Security | |
| Plain Washers | |
| Plastic foil Testing regulations | |
| Plastic Parts. Testing Regulations | |
| Plastic trim piping Testing regulations | |
| Plastic, Summary | |
| Plastic-Coated fabric Testing Regulations | |
| Plastics Pipe Institute Position Statement on Polyethylene Materials For Closed-Loop Ground-Coupled Refrigeration and Heating Applications | |
| Plastics, Abbreviations | |
| Plywood for Use in Cooling Towers | |
| Polyvinyl Chloride and Chlorinated Polyvinyl Chloride Materials Used for Film Fill, Splash Fill, Louvers and Drift Eliminators | |
| Position Statement on Improved Material Categories for Polyethylene Pressure Pipe | |
| Position Statement on Recommended Color Code for Solid Wall Plastic Pipe | |
| PPI POSITION STATEMENT ON USE OF PCR MATERIALS IN POLYETHYLENE PIPE | |
| Presence of passivation film Testing method | |
| Pressure Preservative Treatment of Lumber | |
| Prevailing Torque Type All-Metal Hexagon Nuts | |
| Prevailing Torque Type Hexagon Nuts With Flange and Polyamide Insert | |
| Prevailing Torque Type Hexagon Nuts With Polyamide Insert | |
| PRINCIPLES UNDERPINNING MEDICAL STANDARDS FOR OPERATORS OF UNMANNED AERIAL SYSTEMS (UAS) | |
| PROCEDURES FOR STANDARDIZED EXPLOITATION OF RCIED SWITCHES, RADIO TECHNOLOGIES, AND OTHER ELECTRONIC COMPONENTS | |
| Product Design and Manufacturing Conformance Certification | |
| Product Life Cycle Management System Requirements for the Petroleum and Natural Gas Industries | |
| Product Safety. Car Projects Where Requirement Classes Apply | |
| Progressing Cavity Pump Systems for Artificial Lift\x97Pumps | |
| Progressing Cavity Pump Systems for Artificial Lift\x97Surface-driv e Systems | |
| PROJECT MANAGERS\x92 GUIDE TO QUALITY ASSURANCE INSIGHT, OVERSIGHT AND INTERVENTION IN THE ACQUISITION PROCESS | |
| Qualification of Applicators of Coating/Plating Services for Equipment Used in the Petroleum and Natural Gas Industry | |
| Qualification of Distributors of Metallic Materials for Use in the Petroleum and Natural Gas Industries | |
| QUALIFICATION OF NONDESTRUCTIVE EXAMINATION SERVICES FOR EQUIPMENT USED IN THE PETROLEUM AND NATURAL GAS INDUSTRY | |
| Qualification of Polymeric Seal Manufacturers for Use in the Petroleum and Natural Gas Industries | |
| Qualification of Suppliers of Machining Services for Use in the Petroleum and Natural Gas Industries | |
| RADIOLOGICAL CHALLENGE LEVELS | |
| RECOMMENDED CHEMICAL, BIOLOGICAL AND TIC CHALLENGE LEVELS | |
| REFERENCE DOCUMENTS ON LIFE CYCLE COSTS | |
| Relative Oxidative Aggressiveness of Chloramines and Free Chlorine Disinfectants used in Treated Potable Water on Crosslinked Polyethylene (PEX) Pipe | |
| Requirement Classes. Car Projects in Other Systems than UG | |
| REQUIREMENTS FOR SAFE ENTRY AND CLEANING OF PETROLEUM STORAGE TANKS | |
| Resistance to flex cracking. Leather Testing method | |
| Resistance to moisture Testing method | |
| Resistance to UV light outdoor Testing method | |
| Resistance to wear Testing method | |
| Rim Testing regulations | |
| RISK ASSESSMENT OF NON-LETHAL KINETIC ENERGY PROJECTILES | |
| RISK MANAGEMENT | |
| Rivet Nuts | |
| Rubber Design instructions | |
| Rubber Hardness conversions | |
| Rubber mounts Testing Regulations | |
| Rubber Summary Selecting the rubber grade | |
| Seamless and welded steel tubes Dimensions and weights Survey | |
| Seamless steel tubes Cold worked precision steel tubes | |
| Selection, Preparation, Validation, Care and Storage of Natural Gas and Natural Gas Liquids Reference Standard Blends | |
| Shrinktube with adhesive made of Polyolefin | |
| Shrinktube without adhesive made of polyolefin | |
| Six Point Socket Low Round Head Tapping Screws With Type AB Point | |
| Six point Socket Pan Head Screws With Captive Washer and Entry Dog | |
| Six Point Socket Pan Head Screws | |
| Six Point Socket Pan Head Tapping Screws With Washer | |
| Six Point Socket Pan Head Tapping Screws | |
| Socket for cable terminal Material: Phosphor bronze | |
| Soft rubber products Testing regulations | |
| SOLDIER PHYSICAL LOAD CONFIGURATION | |
| Solvents in Electro-Immersion Paints (Non water-soluble) Testing Method | |
| Sound dampening material Testing Regulations | |
| SPECIAL AERONAUTICAL CHARTS (SAC) | |
| SPECIFICATION FOR AIR EXCHANGE COOLERS FOR PACKAGED COMPRESSOR UNITS | |
| Specification for FABRICATED STRUCTURAL STEEL PIPE | |
| SPECIFICATION FOR MISCELLANEOUS PRODUCTION EQUIPMENT | |
| SPECIFICATION FOR OFFSHORE CRANES | |
| SPECIFICATION for OIL AND GAS SEPARATORS | |
| SPECIFICATION FOR OIL STORAGE TANKS WITH RIVETED SHELLS | |
| SPECIFICATION FOR OIL-FIELD FLAT BELTING | |
| SPECIFICATION FOR OIL-FIELD V-BELTING | |
| SPECIFICATION for PUMPING UNITS | |
| SPECIFICATION FOR SUBSURFACE PUMPS AND FITTINGS | |
| SPECIFICATION for VERTICAL EMULSION TREATERS | |
| Specification for Welded Aluminum-alloy Storage Tanks (Tentative) | |
| SPECIFICATION FOR WELDED OIL STORAGE TANKS | |
| SPECIFICATION FOR WOODEN PRODUCTION TANKS | |
| SPECIFICATION ON RATING OF PUMPING MACHINES (Tentative) | |
| Specifications for Oil field Boilers (LOCOMOTIVE TYPE) | |
| SPECIFICATIONS for TANK VEHICLES | |
| Splitting strength of a bonded joint (Pulling angle 180\xb0) Testing Method | |
| Square and rectangular tubes Welded, cold worked, not annealed Steel 1312 | |
| Standard 2-2021 Standard for Design of Safe Closed-Circuit Ammonia Refrigeration Systems | |
| Standard for Fire Resistant Partition Systems used in Cooling Towers | |
| Standard for Preparing a DMSMS Management Plan | |
| Standard for Publication of Custom Cooling Tower Thermal Performance Test Results | |
| Standard for Repair and Remanufacture of Drill-through Equipment | |
| Standard for Subsea High Integrity Pressure Protection Systems (HIPPS) | |
| Standard for Subsea Production Control Systems | |
| Standard for the Certification of Water-Cooling Tower Thermal Performance | |
| Standard for Third Party Network Connectivity | |
| Standard for Vibration Limits in Water Cooling Towers | |
| Standard for Water Flow Measurement Part I: Test Procedure Part II: Appendix | |
| STANDARD GUIDE FOR DIMENSIONAL COORDINATION OF STRUCTURAL CLAY UNITS, CONCRETE MASONRY UNITS, AND CLAY FLUE LININGS (DISCONTINUED - COMBINED WITH E835/ E835M) (E1-1984) | |
| STANDARD MASTER MATRIX FOR LIGHT-WATER REACTOR PRESSURE VESSEL SURVEILLANCE STANDARDS, E 706(0) | |
| Standard Method for Measurement and Calibration of Horizontal Tanks | |
| Standard Method Of Test for Density, Specific Gravity or API Gravity Of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method | |
| STANDARD METHOD OF TEST FOR WATER AND SEDIMENT IN CRUDE OILS AND FUEL OILS BY CENTRIFUGE | |
| STANDARD METHOD OF TEST FOR WATER IN PETROLEUM PRODUCTS AND BITUMINOUS MATERIALS BY DISTILLATION | |
| STANDARD METHODS FOR THE EXAMINATION OF WATER AND WASTEWATER | |
| STANDARD METHODS OF TEST FOR WATER AND SEDIMENT IN CRUDE OILS | |
| STANDARD PETROLEUM MEASUREMENT TABLES | |
| STANDARD PRACTICE FOR CALCULATING VISCOSITY INDEX FROM KINEMATIC VISCOSITY AT 40 DEGREES C AND 100 DEGREES C *** ALSO SEE ASTM D2270 (R) *** | |
| STANDARD PRACTICE FOR SAMPLING AGGREGATES *** ALSO SEE ASTM D75 (S) *** | |
| STANDARD PROCESS FOR HANDLING CUSTOMER COMPLAINTS | |
| Standard Requirements for Seismic Evaluation and Retrofit of Existing Concrete Buildings (ACI 369.1-17) and Commentary | |
| Standard Requirements for Seismic Evaluation and Retrofit of Existing Concrete Buildings (ACI 369.1M-17) and Commentary | |
| Standard Specification for Repairing Concrete with Epoxy Mortars (ACI 503.4-92) | |
| STANDARD SPECIFICATION FOR SLAG CEMENT FOR USE IN CONCRETE AND MORTARS *** ALSO SEE ASTM C989 (S) *** | |
| Standard Specifications Fiberglass-Reinforce d Plastic Panels for Application on Industrial Water-Cooling Towers | |
| Standard Specifications for the Design of Cooling Towers with Douglas Fir Lumber | |
| Standard Specifications for the Design of Cooling Towers with Redwood Lumber | |
| Standard Specifications Timber Connection Specification | |
| STANDARD TABLES FOR POSITIVE DISPLACEMENT METER PROVER TANKS | |
| STANDARD TEST METHOD FOR DETERMINING DENSITY OF STRUCTURAL LIGHTWEIGHT CONCRETE *** ALSO SEE ASTM C567 (S) *** | |
| STANDARD TEST METHOD FOR KINEMATIC VISCOSITY OF ASPHALTS (BITUMENS) *** ALSO SEE ASTM D2170 (R) *** | |
| STANDARD TEST METHOD FOR OIL CONTENT OF PETROLEUM WAXES *** ALSO SEE ASTM D721 (R) *** | |
| STANDARD TEST METHOD FOR SEDIMENT IN CRUDE OIL BY MEMBRANE FILTRATION *** ALSO SEE ASTM D4807 (R) *** | |
| STANDARD TEST METHOD FOR SOFTENING POINT OF BITUMEN (RING-AND-BALLAPPARA TUS) *** ALSO SEE ASTM D36 (R) *** | |
| Standard Test Methods for Metal Powders and Metallurgy Products CD-Rom | |
| STANDARD TEST METHODS FOR METAL POWDERS AND POWDER METALLURGY PRODUCTS | |
| Standardization of Hand Laundering for Fabrics and Apparel | |
| STANDARDIZATION OF REINTEGRATION | |
| STANDARDS FOR LOCAL AREA NETWORKS: TOKEN-PASSING BUS ACCESS METHOD AND PHYSICAL LAYER SPECIFICATIONS (IEEE COMPUTER SOCIETY DOC.) (ISO/DIS 8802/4) | |
| State of the Industry | |
| STATEMENT OF POSITION ON DYEING OF HEATING OILS | |
| STATIC ELECTRICITY RESEARCH PROJECT | |
| Statistical Analysis with Excel For Dummies 2nd Edition | |
| Steel. Zn and AlZn Coated Cold Rolled Sheet. Dimensions and Tolerances | |
| Sterilization Part 1: Sterilization in Health Care Facilities | |
| Sterilization Part 2: Sterilization Equipment Design and Use | |
| Sterilization Part 3: Industrial Process Control | |
| Stiffness. Determination of test bending length Testing method | |
| Strips of soft cell materials Testing regulations | |
| Structural Design Criteria for Onshore Modules | |
| Structural Design Criteria | |
| SUCKER ROD SPECIFICATIONS | |
| SUCKER RODS | |
| SUPPORT STAGE MAINTENANCE OPTIMISATION | |
| Survey. Standards for Chemico-Technical Products | |
| Symbols and Designations, Survey. Drawings in Other Systems Than UG | |
| SYMBOLS DESIGNATING FUNCTION OF CONTROLS IN MILITARY VEHICLES | |
| SYSTEMS AND SOFTWARE ENGINEERING \x96 SOFTWARE LIFE CYCLE PROCESSES | |
| T Uncoated steel, cold rolled \x96 Dimensions and tolerances | |
| TABLE OF PHYSICAL PROPERTIES FOR HYDROCARBONS AND OTHER COMPOUNDS OF INTEREST TO THE NATURAL GAS AND NATURAL GAS LIQUIDS INDUSTRIES | |
| Tape - General introduction | |
| Taste and Odor Statement | |
| Technical Drawings. Dimensioning and Tolerancing of Profiles | |
| Tensile and tear strength Plastic foil. Testing method | |
| Tensile and tear strength Plastic-coated fabric Testing method | |
| Tensile strength, leather Testing method | |
| Tentative Low-Pressure Field Method for Determining Ethyl Mercaptan Odorant in LP-Gas Using Length of Stain Tubes | |
| Tentative Method for the Analysis of Natural Gas Condensate Mixtures Containing Nitrogen and Carbon Dioxide by Gas Chromatography | |
| Tentative Method for the Determination of Ammonia in Liquid Propane | |
| Tentative Method for the Determination of Carbonyl Sulfide (COS) in Unodorized Liquid Propane | |
| Tentative Method for the Determination of Ethyl Mercaptan in Lp-Gas Using Length of Stain Tubes | |
| Tentative Method for the Qualitative Determination of Carbonyl Sulfide in Propane | |
| Tentative Method of Extended Analysis for Natural Gas and Similar Gaseous Mixtures by Temperature Programmed Gas Chromatography | |
| Test for Hydrogen Sulfide and Carbon Dioxide in Natural Gas Using Length of Stain Tubes | |
| TEST PROCEDURES FOR SMALL ARMS SUPPRESSORS | |
| Textiles Testing regulations | |
| THE DESIGN AND CONSTRUCTION OF LIQUEFIED-PETROLEUM- GAS INSTALLATIONS AT MARINE AND PIPELINE TERMINALS, NATURAL-GASOLINE PLANTS, REFINERIES, AND TANK FARMS | |
| THE HUMAN ENGINEERING AUDIT - QUALITY ASSESSMENT FOR ADVANCED AIRCREW SYSTEMS | |
| THE HUMAN ENGINEERING TEST AND EVALUATION PROCEDURES FOR SYSTEMS. EQUIPMENT AND FACILITIES | |
| THE NATO SURVIVAL, ESCAPE/EVASION, RESISTANCE AND EXTRACTION (SERE) TRAINING STANDARD - APRP-3.3.7.5 EDITION A | |
| THE STANDARDS OF THE BRAZED ALUMINIUM PLATE-FIN HEAT EXCHANGER MANUFACTURERS\x92 ASSOCIATION | |
| Thermal cycling test for metallic coatings on plastic parts Testing method | |
| Thermoplastic Elastomer. Testing Regulations | |
| Thermoplastic materials. Testing regulations | |
| Thick Plain Washers | |
| Underbody Compound, Bitumen Base. Testing Regulations | |
| URBAN COMBAT ADVANCED TRAINING TECHNOLOGY (UCATT) - STANDARD FOR LASER ENGAGEMENT INTERFACE AND AMMUNITION TABLE | |
| Use of Calcium Carbonate (CaCO3) Additives in HDPE Conduit | |
| USE OF GEOMAGNETIC MODELS | |
| Use of Pressure-Rated PE4710 Pipe for Conduit Applications | |
| UV resistance, Xenon lamp Testing method | |
| Vacuum Hose Testing regulations | |
| Variable Frequency Drive Application Guidelines for Cooling Towers | |
| Venting Atmospheric and Low-Pressure Storage Tanks Nonrefrigerated and Refrigerated | |
| VENTING ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS | |
| VISUAL AND INFRARED IMAGERY COLLECTION STANDARD FOR TARGET ACQUISITION TRAINERS | |
| Washer, Circular Type SPB | |
| Water and moisture absorption Testing method | |
| WATER SURVIVAL TRAINING FOR AIRCREWS AND DESIGNATED FLYING PERSONNEL | |
| Webbing for safety belt Testing regulations | |
| Welded steel tubes Cold worked precision steel tubes | |
| WELDING OF PIPELINES AND RELATED FACILITIES | |
| Welding Services for Equipment Used in the Petroleum and Natural Gas Industry | |
| Wet abrasion resistance of underbody coating Testing method | |
| Wood fibre boards Testing Regulations |
| << Prev | Next >> |