Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
1000
1150
1200
1250
1300
1350
1400
1440
1450
1460
1470
1480
1490
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1520
1530
1540
1550
1560
1570
1600
1620
| Product Name | Notes |
|---|---|
| Abrasion Loss of Paper and Paperboard (Taber-Type Method) | |
| Accelerated light aging of printing and writing paper by xenon-arc exposure apparatus | |
| Accelerated pollutant aging of printing and writing paper by pollution chamber exposure apparatus | |
| Accelerated temperature aging of printing and writing paper by dry oven exposure apparatus | |
| Acid-Soluble Iron in Paper | |
| Aging of paper and board with moist heat | |
| Air Permeance of Paper and Paperboard (Sheffield Method) | |
| Air Resistance of Paper (Gurley Method) | |
| Alkalinity of Paper as Calcium Carbonate (Alkaline Reserve of Paper) | |
| Alpha-Cellulose in Paper | |
| Analysis of Bleaching Powder, Calcium Hypochlorite Bleach Liquor, and Bleach Sludge | |
| Analysis of Casein | |
| Analysis of Caustic Soda | |
| Analysis of Crude Tall Oil | |
| Analysis of Formaldehyde in Aqueous Solutions and of Free Formaldehyde in Resins | |
| Analysis of Industrial Process Water | |
| Analysis of Lime | |
| Analysis of Limestone | |
| Analysis of Rosin Size | |
| Analysis of Rosin | |
| Analysis of Salt Cake | |
| Analysis of Soda and Sulfate Black Liquor | |
| Analysis of soda and sulfate white and green liquors | |
| Analysis of Soda and Sulfate White and GreenLiquors | |
| Analysis of Sodium Carbonate (Soda Ash) | |
| Analysis of Sodium Hydrosulfite | |
| Analysis of Sodium Silicate | |
| Analysis of Starch and Starch Products | |
| Analysis of Sulfuric Acid | |
| Analysis of Talc | |
| Analysis of Tall Oil Soap Skimmings | |
| APPLICABILITY OF TELEMATIC PROTOCOLS AND TERMINAL CHARACTERISTICS TO COMPUTERIZED COMMUNICATION TERMINALS (CCTs) | |
| Bacteriological Examination of Paper and Paperboard | |
| Bending Number of Paperboard | |
| Bending Resistance (Stiffness) of Paper (Taber-Type Tester in 0 to 10 Taber Stiffness Unit Configuration) | |
| Bending Resistance (Stiffness) of Paper and Paperboard (Taber-Type Tester in Basic Configuration) | |
| Bending Resistance of Paper (Gurley-Type Tester) | |
| Bending Resistance of Paper and Paperboard (Lorentzen & Wettre Type Tester) | |
| Bending resistance of paper and paperboard by single-point bending method | |
| Bending Stiffness of Paper and Paperboard (Resonance Length Method) | |
| Binary File Transfer Format for the Telematic Services - Series T: Terminals for Telematic Services | |
| BINARY FILE TRANSFER FORMAT FOR THE TELEMATIC SERVICES | |
| Blister Resistance of Coated Paper in Heatset Printing | |
| Blocking Resistance of Gummed Flat Papers | |
| Book Bulk and Bulking Number of Paper | |
| Brightness of Clay and Other Mineral Pigments (45 Degrees/0 Degrees) | |
| Brightness of Clay and Other Mineral Pigments (d/0 Diffuse) | |
| Brightness of Pulp, Paper, and Paperboard (Directional Reflectance at 457 nm) | |
| Castor-Oil Penetration Test for Paper | |
| Character Coded Control Functions for Telematic Services - Telematic Services Terminal Equipments and Protocols for Telematic Services (Study Group 8) 76 pp | |
| Character Coded Control Functions for Telematic Services | |
| CHARACTER REPERTOIRE AND CODED CHARACTER SETS FOR THE INTERNATIONAL TELETEX SERVICE | |
| CIE whiteness and tint of paper and paperboard (d/0 geometry, C/2 illuminant /observer) | |
| CIE Whiteness and Tint of Paper and Paperboard (Using 45 Degree/ 0 Degree Directional Illumination and Normal Viewing) | |
| CIE whiteness and tint of paper and paperboard (Using 45/0 geometry, C/2 illuminant/observer) | |
| CIE Whiteness and Tint of Paper and Paperboard (Using d/0 Degree Diffuse Illumination and Normal Viewing) | |
| Coefficients of Static and Kinetic Friction of Uncoated Writing and Printing Paper by Use of the Horizontal Plane Method | |
| Color of Paper and Paperboard (45 Degrees/ 0 Degrees Geometry) | |
| Color of paper and paperboard (45/0, C/2) | |
| Color of Paper and Paperboard (d/0 Degrees Geometry) | |
| Color of paper and paperboard (d/0, C/2) | |
| Colour and Gray-Scale Image Representations Using Lossless Coding Scheme for Facsimile - Series T: Terminals for Telematic Services | |
| Colour and Gray-Scale Image Representations Using Lossless Coding Scheme for Facsimile Amendment 1: Accommodation of New and Future Resolutions Series T: Terminals for Telematic Services | |
| Colour and gray-scale image representations using lossless coding scheme for facsimile Amendment 1: Accommodation of new and future Resolutions | |
| Colour and gray-scale image representations using lossless coding scheme for facsimile | |
| Commercial building telecommunications cabling standard - Part 1: General requirements - Addendum 1 - Minimum 4-pair UTP and 4-pair ScTP patch cable bend radius | |
| Commercial building telecommunications cabling standard - Part 1: General requirements - Addendum 2 - Grounding and bonding specifications for screened balanced twisted-pair horizontal cabling | |
| Commercial building telecommunications cabling standard - Part 1: General requirements - Addendum 3 - Supportable distances and channel attenuation for optical fiber applications by fiber type | |
| Commercial building telecommunications cabling standard - Part 1: General requirements - Addendum 4 - Recognition of category 6 and 850 nm laser-optimized 50/125 Um multimode optical fiber cabling | |
| Commercial building telecommunications cabling standard - Part 1: General requirements | |
| Commercial building telecommunications cabling standard - Part 2: Balanced twisted pair cabling components - Addendum 1 - Transmission performance specifications for 4-pair 100 ohm category 6 cabling | |
| Commercial building telecommunications cabling standard - Part 2: Balanced twisted pair cabling components - Addendum 2 | |
| Commercial building telecommunications cabling standard - Part 2: Balanced twisted pair cabling components - Addendum 3 - Additional considerations for insertion loss and return loss pass/fail determination | |
| Commercial building telecommunications cabling standard - Part 2: Balanced twisted pair cabling components - Addendum 4 - Solderless connection reliability requirements for copper connecting hardware | |
| Commercial building telecommunications cabling standard - Part 2: Balanced twisted-pair cabling components - Addendum 5 - Corrections to TIA/EIA-568-B.2 | |
| Commercial building telecommunications cabling standard - Part 2: Balanced twisted-pair cabling components | |
| Communication Application Profile BT0 for Document Bulk Transfer Based on the Session Service - Terminals for Telematic Services Amendment 1 (Study Group 8) 27 pp | |
| Communication Application Profile BT0 for Document Bulk Transfer Based on the Session Service - Terminals for Telematic Services | |
| COMMUNICATION APPLICATION PROFILE BT0 FOR DOCUMENT BULK TRANSFER BASED ON THE SESSION SERVICE Amendment 1 | |
| COMMUNICATION APPLICATION PROFILE BT0 FOR DOCUMENT BULK TRANSFER BASED ON THE SESSION SERVICE | |
| Communication Application Profile BT1 for Document Bulk Transfer (Study Group VIII) 7 pp | |
| COMMUNICATION APPLICATION PROFILE BT1 FOR DOCUMENT BULK TRANSFER | |
| Communication Application Profile DM-1 for Videotex Interworking - Telematic Services Terminal Equipments and Protocols for Telematic Services (Study Group VIII) 23 pp | |
| COMMUNICATION APPLICATION PROFILE DM-1 FOR VIDEOTEX INTERWORKING | |
| Conformance Testing Procedures for the Teletex Recommendations - Telematic Services Terminal Equipments and Protocols for Telematic Services (Study Group VIII) 127 pp | |
| CONFORMANCE TESTING PROCEDURES FOR THE TELETEX RECOMMENDATIONS | |
| Contact Angle of Water Droplets on Corona-Treated Polymer Film Surfaces | |
| Continuous Tone Colour Representation Method for Facsimile - Series T: Terminals for Telematic Services | |
| Continuous-tone colour representation method for facsimile Corrigendum 1 SERIES T: TERMINALS FOR TELEMATIC SERVICES | |
| Continuous-tone colour representation method for facsimile Corrigendum 1 | |
| Continuous-tone colour representation method for facsimile | |
| Control Procedures for Teletex and G4 Facsimile Services Based on Recommendations X.215 and X.225 - Telematic Services Terminal Equipments and Protocols for Telematic Services | |
| Control Procedures for Teletex and G4 Facsimile Services Based on Recommendations X.215 and X.225 | |
| Control Procedures for Teletex and Group 4 Facsimile Services - Terminal Services Terminal Equipments and Protocols for Telematic Services | |
| Control Procedures for Teletex and Group 4 Facsimile Services | |
| Copper Number of Pulp, Paper, and Paperboard | |
| Creasing of Flexible Packaging Material Paper Specimens for Testing | |
| Cross-Machine Grammage Profile Measurement (Gravimetric Method) | |
| Curl of Gummed Flat Papers | |
| Degree of Curl and Sizing of Paper | |
| Determination of Effective Residual Ink concentration (ERIC) By Infrared Reflectance Measurement | |
| Determination of Effective Residual Ink Concentration by Infrared Reflectance Measurement | |
| Determination of Equilibrium Moisture in Pulp, Paper and Paperboard for Chemical Analysis | |
| Determination of Polyethylene (Resin) Adhesion to Porous Substrates | |
| Determination of Sodium Polysulfide in Kraft White Liquor | |
| Determination of Suspended Solids in Kraft Green and White Liquors | |
| Determination of Thermoplastic Coating Adhesion to Non-Porous Substrates | |
| Determination of Titanium Dioxide | |
| Determination of Wetting Tension of Polyolefin Films and Coated Surfaces Via the Mayer Rod Technique | |
| Diffuse brightness of paper and paperboard (d/0) | |
| Diffuse brightness of paper, paperboard and pulp (d/0) (ultraviolet level D65) | |
| Diffuse Brightness of Pulp (d/0 Degrees) | |
| Diffuse Brightness of Pulp, Paperboard and Pulp (d/0) | |
| Diffuse Opacity of Paper (D/0 Paper Backing) | |
| Dirt Count in Paper and Paperboard (Optical Character Recognition - OCR) | |
| Dirt in Paper and Paperboard | |
| Document Application Profile for the Interchange of Group 4 Facsimile Documents Series T: Terminals for Telematic Services | |
| Document application profile for the interchange of Group 4 facsimile documents | |
| Document Application Profile for Videotex Interworking - Telematic Services Terminal Equipments and Protocols for Telematic Services (Study Group VII) 11 pp | |
| DOCUMENT APPLICATION PROFILE FOR VIDEOTEX INTERWORKING | |
| Document Application Profile MM for the Interchange of Formatted Mixed Mode Documents - Terminal Services Terminal Equipments and Protocols for Telematic Services | |
| DOCUMENT APPLICATION PROFILE MM FOR THE INTERCHANGE OF FORMATTED MIXED MODE DOCUMENTS | |
| Document Application Profile PM-11 for the Interchange of Simple Structure, Character Content Documents in Processable and Formatted Forms - Terminals for Telematic Services (Study Group 8) 57 pp | |
| DOCUMENT APPLICATION PROFILE PM-11 FOR THE INTERCHANGE OF SIMPLE STRUCTURE, DOCUMENTS FORMATTED CHARACTER CONTENT tN PROCESSABLE AND FORMS | |
| Document Application Profile PM-26 for the Interchange of Enhanced Structure, Mixed Content Documents in Processable and Formatted Forms - Terminals for Telematic Services | |
| DOCUMENT APPLICATION PROFILE PM-26 FOR THE INTERCHANGE OF ENHANCED STRUCTURE, MIXED CONTENT DOCUMENTS IN PROCESSABLE AND FORMATTED FORMS | |
| DOCUMENT APPLICATION PROFILE PM-36 FOR THE INTERCHANGE OF EXTENDED DOCUMENT STRUCTURES AND MIXED CONTENT DOCUMENTS IN PROCESSABLE AND FORMATTED FORMS | |
| DOCUMENT TRANSFER AND MANIPULATIO (DTAM) - SERVICES AND PROTOCOLS - PROTOCOL SPECIFICATIONS FOR CONFIRMED DOCUMENT MANIPULATION | |
| Document Transfer and Manipulation (DTAM) - Operational Structure - Terminal Equipment and Protocols for Telematic Services (Study Group VIII) 4 pp | |
| DOCUMENT TRANSFER AND MANIPULATION (DTAM) - OPERATIONAL STRUCTURE | |
| Document Transfer and Manipulation (DTAM) - Services and Protocols - Abstract Service Definition and Procedures for Confirmed Document Manipulation - Terminals for Telematic Services (Study Group 8) 65 pp | |
| DOCUMENT TRANSFER AND MANIPULATION (DTAM) - SERVICES AND PROTOCOLS - ABSTRACT SERVICE DEFINITION AND PROCEDURES FOR CONFIRMED DOCUMENT MANIPULATION | |
| Document Transfer and Manipulation (DTAM) - Services and Protocols - Introduction and General Principles - Terminal Equipment and Protocols for Telematic Services (Study Group VIII) 19 pp | |
| DOCUMENT TRANSFER AND MANIPULATION (DTAM) - SERVICES AND PROTOCOLS - INTRODUCTION AND GENERAL PRINCIPLES | |
| Document Transfer and Manipulation (DTAM) - Services and Protocols - Protocol Specifications for Confirmed Document Manipulation - Terminal for Telematic Services (Study Group 8) 13 pp | |
| DOCUMENT TRANSFER AND MANIPULATION (DTAM) - SERVICES AND PROTOCOLS - PROTOCOL SPECIFICATIONS FOR CONFIRMED DOCUMENT MANIPULATION | |
| Document Transfer and Manipulation (DTAM) - Services and Protocols - Service Definition - Amendment 1: Revisions of T.432 to Support G4 Colour and File Transfer - Terminals for Telematic Services... | |
| DOCUMENT TRANSFER AND MANIPULATION (DTAM) - SERVICES AND PROTOCOLS - SERVICE DEFINITION AMENDMENT I: REVISIONS OF T.432 TO SUPPORT G4 COLOUR AND FILE TRANSFER | |
| Document Transfer and Manipulation (DTAM) Services and Protocols - Service Definition - Terminal Equipment and Protocols for Telematic Services Amendment 1 (Study Group VIII) 45 pp | |
| DOCUMENT TRANSFER AND MANIPULATION (DTAM) SERVICES AND PROTOCOLS - SERVICE DEFINITION | |
| Document Transfer, Access and Manipulation (DTAM) - Services and Protocols - Protocol Specification - Amendment 1: Revisions of T.433 to Support G4 Colour and File Transfer - Terminals for Telematic... | |
| Document Transfer, Access and Manipulation (DTAM) - Services and Protocols - Protocol Specification - Terminal Equipment and Protocols for Telematic Services | |
| DOCUMENT TRANSFER, ACCESS AND MANIPULATION (DTAM) - SERVICES AND PROTOCOLS - PROTOCOL SPECIFICATION AMENDMENT I: REVISIONS OF T.433 TO SUPPORT G4 COLOUR AND FILE TRANSFER | |
| DOCUMENT TRANSFER, ACCESS AND MANIPULATION (DTAM) - SERVICES AND PROTOCOLS - PROTOCOL SPECIFICATION | |
| Dry tensile properties of paper towel and tissue products (using constant rate of elongation apparatus) | |
| Dynamic Measurement of Water Vapor Transfer Through Sheet Materials | |
| Dynamic Strength of Flexible Barrier Material Seals | |
| Effect of Dry Heat on Properties of Paper and Board | |
| Effect of Moist Heat on Properties of Paper and Boar | |
| Effect of Moist Heat on Properties of Paper and Board | |
| Envelope Seal, Seam, and Window Patch Testing | |
| Equilibrium Relative Humidity of Paper and Paperboard | |
| Equivalent Black Area (EBA) and Count of Visible Dirt in Pulp, Paper and Paperboard by Image Analysis | |
| Extensional Viscosity of Coating Color Evaluated as Euler Number Using Orifice Rheometer | |
| Facsimile Code Points for Use with Recommendations V.8 and V.8 bis Amendment 1 Series T: Terminals for Telematic Services | |
| Facsimile Code Points for Use with Recommendations V.8 and V.8 bis Series T: Terminals for Telematic Services | |
| Facsimile code points for use with Recommendations V.8 and V.8 bis | |
| FACSIMILE CODING SCHEMES AND CODING CONTROL FUNCTIONS FOR GROUP 4 FACSIMILE APPARATUS | |
| Flame Resistance of Treated Paper and Paperboard | |
| Flexural Properties of Paper (Clark Stiffness) | |
| Folding Endurance of Paper (MIT Tester) | |
| Folding Endurance of Paper (Schopper Type Tester) | |
| Fungus Resistance of Paper and Paperboard | |
| Gateway Characteristics for Videotex Interworking - Telematic Services Terminal Equipments and Protocols for Telematic Services | |
| GATEWAY CHARACTERISTICS FOR VIDEOTEX INTERWORKING | |
| GENERAL OVERVIEW OF THE T.510-SERIES RECOMMENDATIONS | |
| Glue in Paper (Qualitative and Quantitative Determination) | |
| Grease Resistance of Flexible Packaging Materials | |
| Grease Resistance Test for Paper and Paperboard | |
| Gross Heating Value of Black Liquor | |
| Grounding and Bonding for Telecommunications in Commercial Buildings | |
| Guide for Design of Tapes, Braids, Wraps and Servings | |
| GUIDELINES FOR ENVIRONMENTAL AUDITING - AUDIT PROCEDURES AUDITING OF ENVIRONMENTAL MANAGEMENT | |
| High Shear Capillary Viscosity of Coating Color on Paper and Paperboard | |
| Hot Water Extractable Acidity or Alkalinity of Paper | |
| Hurricane Shutter Design Considerations for Florida | |
| Hydrogen Ion Concentration (pH) of Paper Extracts (Cold Extraction Method) | |
| Hydrogen Ion Concentration (pH) of Paper Extracts (Hot Extraction Method) | |
| Identification and Determination of Melamine Resin in Paper | |
| Identification of Wire Side of Paper | |
| Information Technology - Open Document Architecture (ODA) and Interchange Format - Identification of Document Fragments - Terminals for Telematic Services 32 pp | |
| INFORMATION TECHNOLOGY - OPEN DOCUMENT ARCHITECTURE (ODA) AND INTERCHANGE FORMAT - IDENTIFICATION OF DOCUMENT FRAGMENTS | |
| Information Technology - Open Document Architecture (ODA) and Interchange Format - Temporal Relationships and Non-Linear Structures - Series T: Terminal Equipments and Protocols for Telematic Services; Terminals for Telematic Services... | |
| Information technology - Open Document Architecture (ODA) and interchange format - Temporal relationships and non-linear structures | |
| Information Technology - Open Document Architecture (ODA) and Interchange Format: Audio Content Architectures - Terminals for Telematic Services 33 pp | |
| INFORMATION TECHNOLOGY - OPEN DOCUMENT ARCHITECTURE (ODA) AND INTERCHANGE FORMAT: AUDIO CONTENT ARCHITECTURES | |
| Information Technology - Open Document Architecture (ODA) and Interchange Format: Character Content Architectures - Telematic Services Terminal Equipments and Protocols for Telematic Services 76 pp | |
| Information technology - Open Document Architecture (ODA) and interchange format: Character content architectures Technical Corrigendum 1 | |
| Information Technology - Open Document Architecture (ODA) and Interchange Format: Character Content Architectures; Technical Corrigendum 1 - Series T: Terminals for Telematic Services | |
| INFORMATION TECHNOLOGY - OPEN DOCUMENT ARCHITECTURE (ODA) AND INTERCHANGE FORMAT: CHARACTER CONTENT ARCHITECTURES | |
| Information Technology - Open Document Architecture (ODA) and Interchange Format: Geometric Graphics Content Architecture Telematic Services Terminal Equipments and Protocols for Telematic Services 45 pp | |
| INFORMATION TECHNOLOGY - OPEN DOCUMENT ARCHITECTURE (ODA) AND INTERCHANGE FORMAT: GEOMETRIC GRAPHICS CONTENT ARCHITECTURE | |
| INFORMATION TECHNOLOGY - OPEN DOCUMENT ARCHITECTURE (ODA) AND INTERCHANGE FORMAT: OPEN DOCUMENT INTERCHANGE FORMAT | |
| Information Technology - Open Document Architecture (ODA) and Interchange Format: Raster Graphics Content Architectures - Series Terminals for Telematic Services | |
| Information Technology - Open Document Architecture (ODA) and Interchange Format: Raster Graphics Content Architectures - Telematic Services Terminal Equipments and Protocols for Telematic Services 54 pp | |
| Information technology - Open Document Architecture (ODA) and interchange format: Raster graphics content architectures Amendment 1 | |
| Information Technology - Open Document Architecture (ODA) and Interchange Format: Raster Graphics Content Architectures Amendment 2 Series T: Terminals for Telematic Services | |
| Information technology - Open Document Architecture (ODA) and interchange format: Raster graphics content architectures Amendment 2 | |
| Information technology - Open Document Architecture (ODA) and interchange format: Raster graphics content architectures Technical Corrigendum 1 | |
| Information Technology - Open Document Architecture (ODA) and Interchange Format: Raster Graphics Content Architectures; Technical Corrigendum 1 - Series T: Terminals for Telematic Services | |
| INFORMATION TECHNOLOGY - OPEN DOCUMENT ARCHITECTURE (ODA) AND INTERCHANGE FORMAT: RASTER GRAPHICS CONTENT ARCHITECTURES | |
| Information Technology - Open Document Architecture (ODA) and Interchange Format: Tabular Structures and Tabular Layout - Terminals for Telematic Services | |
| INFORMATION TECHNOLOGY - OPEN DOCUMENT ARCHITECTURE (ODA) AND INTERCHANGE FORMAT: TABULAR STRUCTURES AND TABULAR LAYOUT | |
| Information technology \x96 Open Document Architecture (ODA) and interchange format: Open Document interchange format Technical Corrigendum 2 | |
| Ink Absorbency of Blotting Paper | |
| Internal Bond Strength (Scott Type) | |
| Internal Bond Strength of Paperboard (Z-Direction Tensile) | |
| International Reference Alphabet (IRA) (Formerly International Alphabet No. 5 or IA5) Information Technology - 7-Bit Coded Character Set for Information Interchange (Study Group VIII) 22 pp | |
| INTERNATIONAL REFERENCE ALPHABET (IRA) (FORMERLY INTERNATIONAL ALPHABET No. 5 or IA5) INFORMATION TECHNOLOGY - 7-BIT CODED CHARACTER SET FOR INFORMATION INTERCHANGE | |
| Latin Based Coded Character Sets for Telematic Services - Terminal Equipment and Protocols for Telematic Services Amendment 1 (Study Group VIII) 41 pp | |
| Latin Based Coded Character Sets for Telematic Services - Terminals for Telematic Services | |
| LATIN BASED CODED CHARACTER SETS FOR TELEMATIC SERVICES | |
| Machine Direction Grammage Variation Measurement (Gravimetric Method) | |
| Measuring, Sampling, and Analyzing White Waters | |
| Microbiological Examination of Process Water and Slush Pulp | |
| Mixed Raster Content (MRC) Amendment 1: Accommodation of New Annex B Series T: Terminals for Telematic Services | |
| Mixed Raster Content (MRC) | |
| Non-Latin Coded Character Sets for Telematic Services - Series T: Terminals for Telematic Services | |
| Non-Latin Coded Character Sets for Telematic Services - Terminal Equipments and Protocols for Telematic Services (Study Group VIII) 92 pp | |
| Non-latin coded character sets for telematic services Amendment 1 | |
| NON-LATIN CODED CHARACTER SETS FOR TELEMATIC SERVICES | |
| Odor of Packaging Materials | |
| Opacity of Paper (15/d Geometry, Illuminant A/2 Degrees, 89% Reflectance Backing and Paper Backing) | |
| Opacity of paper (15/d geometry, illuminant A/2\xb0, 89% reflectance backing and paper backing) | |
| Operational Application Profile for Videotex Interworking - Telematic Services Terminal Equipments and Protocols for Telematic Services (Study Group VIII) 25 pp | |
| OPERATIONAL APPLICATION PROFILE FOR VIDEOTEX INTERWORKING | |
| Optical fiber cabling components standard Addendum 1 Additional transmission performance specifications for 50/125 Um optical fiber cables | |
| Optical fiber cabling components standard | |
| Organic Nitrogen in Paper and Paperboard | |
| Particle-Size Distribution of Coating Clay | |
| Performance and Compatibility Requirements for Telephone Sets with Loop Signalling | |
| pH of Filler and Pigment Slurries | |
| Physical Area of Sub-Visible Contraries in Pulp, Paper and Paperboard by Image Analysis | |
| Preparation of Indicators and Standard Solutions | |
| Programming Communication Interface (PCI) APPLI/COM for Facsimile Group 3, Facsimile Group 4, Teletex, Telex, E-Mail and File Transfer Services - Terminals for Telematic Services | |
| PROGRAMMING COMMUNICATION INTERFACE (PCI) APPLUCOM FOR FACSIMILE GROUP 3, FACSIMILE GROUP 4, TELETEX, TELEX, E-MAIL AND FILE TRANSFER SERVICES | |
| Properties of Alumina Hydrate Pigments | |
| Properties of Diatomaceous Silica | |
| Properties of Synthetic Silicate Pigments | |
| Provisions for Verification of Teletex Terminal Compliance - Telematic Services Terminal Equipments and Protocols for Telematic Services (Study Group VIII) 25 pp | |
| PROVISIONS FOR VERIFICATION OF TELETEX TERMINAL COMPLIANCE | |
| Qualitative (Including Optical Microscopic) Analysis of Mineral Filler and Mineral Coating of Paper | |
| Reducing a Gross Sample of Granular or Aggregate Material to Testing Size | |
| Residential Wiring for Telecommunications | |
| Resistance of Paper to Passage of Air (High Pressure Gurley Method) | |
| Resistance of paper to passage of air (high-pressure Gurley method) | |
| Resistance to Mechanical Penetration of Sanitary Tissue Papers (Ball Burst Procedure) | |
| Roughness of Paper and Paperboard (Print-Surf Method) | |
| Roughness of Paper and Paperboard (Sheffield Method) | |
| Roughness of paper and paperboard, stylus (Emveco-type) method | |
| Run-Length Colour Encoding Series T: Terminals for Telematic Services | |
| Run-Length Colour Encoding | |
| Sampling of Fillers and Pigments | |
| Saturating Property of Roofing and Flooring Felt (Kerosine Number) | |
| Score bend test | |
| Screen Residue of Paper Coating Clays and Related Pigments (High-Speed Mixer Method) | |
| Silver Tarnishing by Paper and Paperboard | |
| Size Test for Paper by Ink Resistance (Hercules-Type Method) | |
| Smoothness of Paper (Bekk Method) | |
| Sodium Determination by the Uranyl Zinc Acetate Method | |
| Softness of Sanitary Tissues | |
| Solids Content of Black Liquor | |
| Solvent Holdout of Electrophotographic Base Paper | |
| Sorptive Rate and Capacity of Bibulous Paper Products Using Gravimetric Principles | |
| Specimen Preparation for Cross Directional Internal Tearing Resistance for Paper, Paperboard and Related Materials | |
| Spectral Reflectance Factor, Transmittance, and Color of Paper and Pulp (Polychromatic Illumination) | |
| Specular Gloss of Paper and Paperboard at 20 Degrees | |
| Specular Gloss of Paper and Paperboard at 75 Degrees | |
| Standard Method of Test for Determination of Alkali Threshold for Alkali\x96Silica Reactivity in Aggregates Used in Concrete (ATT) | |
| Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Mixtures Using the Bending Beam Rheometer (BBR) | |
| Standard Method of Test for Determining the Indirect Tensile Nflex Factor to Assess the Cracking Resistance of Asphalt Mixtures | |
| Standard Method of Test for Distillation of Creosote and Creosote Coal Tar Solutions | |
| Standard Method of Test for Ductility of Bituminous Materials | |
| Standard Method of Test for Evaluation of Oxidation Level of Asphalt Mixtures by a Portable Infrared Spectrometer | |
| Standard Method of Test for Flash and Fire Points by Cleveland Open Cup | |
| Standard Method of Test for Float Test for Bituminous Materials | |
| Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings | |
| Standard Method of Test for Measuring Asphalt Binder Yield Energy and Elastic Recovery Using the Dynamic Shear Rheometer | |
| Standard Method of Test for Moisture Sensitivity Using Hydrostatic Pore Pressure to Determine Cohesion and Adhesion Strength of Compacted Asphalt Mixture Specimens | |
| Standard Method of Test for Penetration of Bituminous Materials | |
| Standard Method of Test for Pore Index for Carbonate Coarse Aggregate | |
| Standard Method of Test for Preformed Expansion Joint Filler for Concrete Construction | |
| Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus) | |
| Standard Method of Test for Solubility of Bituminous Materials | |
| Standard Method of Test for Standard Practices for Force Verification of Testing Machines | |
| Standard Method of Test for Stress Sweep Rutting (SSR) Test Using Asphalt Mixture Performance Tester (AMPT) | |
| Standard Method of Test for Tension Testing of Metallic Materials [Metric] | |
| Standard Method of Test for Tension Testing of Metallic Materials | |
| Standard Method of Test for Testing Emulsified Asphalts | |
| Standard Method of Test for Water in Petroleum Products and Bituminous Materials by Distillation | |
| Standard Test Method for Determining the Dynamic Modulus of Asphalt Mixtures Using the Indirect Tension Test | |
| Standardization of Group 3 Facsimile Terminals for Document Transmission - Series T: Terminals for Telematic Services | |
| Standardization of Group 3 Facsimile Terminals for Document Transmission Series T: Terminals for Telematic Services | |
| Standardization of Group 3 facsimile terminals for document transmission | |
| Starch Consumption in Corrugated Board (Enzymatic/Colorimet ric Method) | |
| Starch Consumption in Corrugated Board (Enzymatic/Gravimetr ic Method) | |
| Starch in Paper | |
| Static Creasing of Paper for Water Vapor Transmission Tests | |
| Sulfur Dioxide in Sulfite Cooking Liquor | |
| Surface pH Measurement of Paper | |
| Surface Strength of Coated Paperboard | |
| Surface Strength of Paper (Wax Pick Test) | |
| Surface Wettability and Absorbency of Sheeted Materials Using an Automated Contact Angle Tester | |
| Surface Wettability of Paper (Angle of Contact Method) | |
| Telecommunications Cabling Systems in Commercial Buildings | |
| Telecommunications Telephone Terminal Equipment Requirements for Pay Telephone Keypads and Function Keys with Particular Regard to Use by Persons with Disabilities | |
| Tensile breaking strength of water-saturated paper and paperboard ( wet tensile strength ) | |
| Tensile Properties of Paper and Paperboard (Using Constant Rate of Elongation Apparatus) | |
| Tensile properties of towel and tissue products (using constant rate of elongation apparatus) | |
| Terminal Characteristics for Group 4 Facsimile Apparatus - Amendment 1 - Series T: Terminals for Telematic Services | |
| Terminal Characteristics for Group 4 Facsimile Apparatus - Amendment 2 - Annex C - T.30 Frames for G4 Facsimile - Series T: Terminals for Telematic Services | |
| Terminal Characteristics for Group 4 Facsimile Apparatus - Series T: Terminals for Telematic Services | |
| Terminal characteristics for Group 4 facsimile apparatus Amendment 1 | |
| Terminal characteristics for Group 4 facsimile apparatus Amendment 2: Annex C - T.30 frames for G4 facsimile | |
| Terminal Characteristics for Group 4 Facsimile Apparatus Amendment 3 Series T: Terminals for Telematic Services | |
| Terminal characteristics for Group 4 facsimile apparatus Amendment 3 | |
| Terminal characteristics for Group 4 facsimile apparatus Corrigendum 1 | |
| Terminal characteristics for Group 4 facsimile apparatus | |
| TERMINAL CHARACTERISTICS FOR MIXED MODE OF OPERATION MM | |
| TERMINAL CHARACTERISTICS FOR TELETEX PROCESSABLE MODE PM.1 | |
| Terminal Characteristics for the Telematic File Transfer within the Teletex Service - Terminal Equipment and Protocols for Telematic Services | |
| TERMINAL CHARACTERISTICS FOR THE TELEMATIC FILE TRANSFER WITHIN THE TELETEX SERVICE | |
| Terminal Equipment for Use in the Teletex Service - Telematic Services Terminal Equipments and Protocols for Telematic Services (Study Group VIII) 24 pp | |
| Terminal Equipment for Use in the Teletex Service | |
| Terms and Definitions for Interconnecting and Packaging Electronic Circuits | |
| Terms and Definitions for the Design and Manufacture of Printed Electronics | |
| Testing Adhesives Used in Glued Lap Joints of Corrugated Fiberboard Containers | |
| Thickness (caliper) of towel, tissue, napkin and facial products | |
| Thickness of Paper and Paperboard (Soft Platen Method) | |
| Transparency of Paper | |
| Transparent Chart for the Estimation of Defect Size | |
| Turpentine Test for Voids in Glassine and Greaseproof Papers | |
| Use of the universal multiple-octet coded character set (UCS) | |
| Videotex/Teletext Presentation Level Protocol Syntax | |
| Viscosity of Adhesives Using a Low-Shear Rotating Apparatus | |
| Viscosity of Coating Clay Slurry | |
| Viscosity of Starch and Starch Products (C.I.V. Test) | |
| Viscosity of Starch and Starch Products | |
| Visual Grading and Color Matching of Paper | |
| Water Absorbency of Bibulous Papers | |
| Water Absorptiveness of Sized (Non-Bibulous) Paper and Paperboard, and Corrugated Fiberboard (Cobb Test) | |
| Water Immersion Test of Paperboard | |
| Water Resistance of Sized Paper and Paperboard (Dry Indicator Method) | |
| Water Vapor Transmission Rate of Paper and Paperboard at 23 Degrees C and 50% RH | |
| Water Vapor Transmission Rate of Paper and Paperboard at High Temperature and Humidity | |
| Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor | |
| Wax in pulp, paper and paperboard | |
| X-Ray Analysis of Paper and Related Materials | |
| Zinc and Cadmium in Paper |
| << Prev | Next >> |