Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
1000
1150
1200
1250
1300
1350
1400
1410
1420
1430
1440
1450
1460
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1480
1490
1500
1510
1520
1530
1550
1600
1620
| Product Name | Notes |
|---|---|
| ABS, MOULDING COMPOUND, HEAT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| Accuracy of frequency measurements at stations for international monitoring | |
| ADAPTIVE MF/HF SYSTEMS | |
| ADDITIONAL INFORMATION FOR MONITORING PURPOSES RELATED TO CLASSIFICATION AND DESIGNATION OF EMISSION | |
| ADHESIVE, BODY | |
| ADHESIVE, BRUSHABLE, SOLVENT RELEASE, BODY | |
| ADHESIVE, EPOXY BASE - TWO-COMPONENT | |
| ADHESIVE, FOR ABS - PLASTICS, SOLVENT RELEASE | |
| ADHESIVE, HEAT CURING TYPE, SOLVENT-FREE | |
| ADHESIVE, HEAT CURING, SOLVENT-FREE | |
| ADHESIVE, PRIMER BUTYL TAPE, REPAIR KIT | |
| ADHESIVE, SOLVENT RELEASE, BODY | |
| ADHESIVE, SOLVENT RELEASE | |
| ADHESIVE, SPOT WELDABLE - SOLVENT-FREE | |
| ADHESIVE, SPRAYABLE, SOLVENT RELEASE, BODY | |
| ADHESIVE, TWO-COMPONENT, EPOXY-BASE | |
| ADHESIVE, TWO-COMPONENT, SOLVENT-RELEASE | |
| An additional methodology for the evaluation of the effect of interference between radiocommunication networks operating in a shared frequency band | |
| Automated mobile spectrum monitoring unit | |
| Automatic monitoring of occupancy of the radio-frequency spectrum | |
| Automation and integration of spectrum monitoring systems with automated spectrum management | |
| Bandwidth Measurement at Monitoring Stations | |
| BITUMEN IMPREGNATED FIBREBOARD | |
| BOARD, BITUMEN | |
| BOARD, CHIP | |
| BOARD, PAINTED SEMI- WATERPROOF | |
| BOARD, PRESSED WOOD FIBRE | |
| BORAX | |
| BUTYL RUBBER BONDING TAPE | |
| CADMIUM AND ZINC PLATING | |
| CAST IRON, NODULAR GRAPHITE (NORMALISED AND TEMPERED GRADE) | |
| Characteristics of ultra-wideband technology | |
| CHIP BOARD, SURFACE IMPREGNATED | |
| CLASSIFICATION OF DIRECTION FINDING BEARINGS | |
| COLLECTION AND PUBLICATION OF MONITORING DATA TO ASSIST FREQUENCY ASSIGNMENT FOR GEOSTATIONARY SATELLITE SYSTEMS | |
| COMMON FORMAT FOR MEMORANDUM OF UNDERSTANDING BETWEEN THE AGREEING COUNTRIES REGARDING COOPERATION IN SPECTRUM MONITORING MATTERS | |
| COMMON FORMATS FOR THE EXCHANGE OF INFORMATION BETWEEN MONITORING STATIONS | |
| Compatibility analysis between a passive service and an active service allocated in adjacent and nearby bands | |
| Complementing current radio frequency delivery mechanisms using Optical Wireless Communication | |
| COMPONENT B (POLYISOCYANATE)FOR PUR-FOAM | |
| Component Packaging and Interconnecting with Emphasis on Surface Mounting | |
| Data format definition for exchanging stored I/Q data for the purpose of spectrum monitoring | |
| DEADENER SHEETING, HEAT FUSIBLE | |
| DEADENING SHEET, MOLDABLE | |
| DECORATIVE BRIGHT ELECTROPLATING ON STEEL PARTS:- FOR VERY LIGHT INTERIOR DUTY | |
| DEFINITION AND MEASUREMENT OF INTERMODULATION PRODUCTS IN TRANSMITTER USING FREQUENCY, PHASE, OR COMPLEX MODULATION TECHNIQUES | |
| DENATURED ALCOHOL | |
| Design guidelines for developing advanced automated spectrum management systems | |
| Design guidelines for developing automated spectrum management systems | |
| DETERMINATION AND MEASUREMENT OF THE POWER OF AMPLITUDE-MODULATED RADIO TRANSMITTERS | |
| DETERMINATION OF THE COORDINATION AREA AROUND AN EARTH STATION IN THE FREQUENCY BANDS BETWEEN 100 MHz AND 105 GHz | |
| Determination of the geographical and frequency distribution of the spectrum utilization factor for frequency planning purposes | |
| Direction finding and location determination at monitoring stations of signals below 30 MHz | |
| Direction finding and location determination at monitoring stations | |
| DVB-T coverage measurements and verification of planning criteria | |
| DVB-T/T2 coverage measurements and verification of planning criteria | |
| EFFICIENT SPECTRUM UTILIZATION USING PROBABILISTIC METHODS | |
| Electric Submeter \x96 Additional Measurements Accuracy | |
| Electrical Submeter\x97 Active Energy Accuracy | |
| Electrical Submeter\x97Current Sensor Accuracy | |
| Electrical Submeter\x97General Requirements | |
| ELECTRONIC EXCHANGE OF INFORMATION FOR SPECTRUM MANAGEMENT PURPOSES | |
| ENAMEL, ACRYLIC METALLIC, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| ENAMEL, ACRYLIC SYN. BAKING - GLOSS | |
| ENAMEL, CHASSIS | |
| Essential Requirements for a Spectrum Monitoring Station for Developing Countries | |
|
Essential requirements for a spectrum monitoring system for developing countries -- SM.1392-2 FRENCH
|
Essential requirements for a spectrum monitoring system for developing countries |
| FIBER BOARD, PAINTED PULP MOLDED | |
| FIBER BOARD, PULP MOLDING | |
| FIBRE BOARD, PAINTED WOOD | |
| FIBRE BOARD, PRESSED WOOD COATED W/HF ADHESIVE | |
| Field-strength measurements along a route with geographical coordinate registrations | |
| Field-Strength Measurements at Monitoring Stations | |
| FORMED PRESSED WOOD FIBRE BOARD, COATED WITH AN HF-WELDING ADHESIVE | |
| Framework for the introduction of devices using ultra-wideband technology | |
| Frequency and Distance Separations | |
| Frequency channel occupancy measurements | |
| Frequency ranges for global or regional harmonization of short-range devices | |
| Frequency ranges for operation of non-beam wireless power transmission systems | |
| General Requirements for Dielectric Surface Mounting Adhesives | |
| GLASS FIBER REINFORCED POLYESTER RESIN | |
| GLASS FLOAT SAFETY, HEAT TREATED, TINTED | |
| GLASS FLOAT, HEAT TREATED, CLEAR | |
| GLASS LAMINATED FLOAT, CLEAR OR TINTED, POLYVINYLBUTYRATE 0.78 + .02 MM | |
| GLASS PLATE SAFETY, LAMINATED ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| GLASS SAFETY, EDGEWORK | |
| GLASS SHEET SAFETY, HEAT TREATED ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| Global harmonization of short-range devices categories | |
| Guidance on frequency ranges for operation of non-beam wireless power transmission for electric vehicles | |
| Guidance on frequency ranges for operation of non-beam wireless power transmission systems for mobile and portable devices | |
| Guidance on frequency ranges for operation of wireless power transmission via radio frequency beam for mobile/portable devices and sensor networks | |
| Guidance on frequency ranges for the operation of non-beam wireless power transmission for mobile and portable devices | |
| Guidance on supplementary elements on the use of Appendix 10 of the Radio Regulations to convey information related to harmful interference to space radiocommunication services | |
| Guidelines for Accelerated Reliability Testing of Surface Mount Solder Attachments | |
| Guidelines for an upgraded spectrum management system for developing countries | |
| Guidelines for Chip-on- Board Technology Implementation | |
| Guidelines for narrow-band wireless home networking transceivers Specification of spectrum related components | |
| HARD DRAWN STEEL WIRE (SEAT SPRING QUALITY) | |
| HIGH TEMPERATURE ALLOY - COBALT BASE | |
| Impact of devices using ultra-wideband technology on systems operating within radiocommunication services | |
| INSULATION, HEAT FUSIBLE SHEET, FLOOR PAN | |
| ISOPROPYL ALCOHOL | |
| Limits for unwanted emissions under free-space condition | |
| Measurement techniques of ultra-wideband transmissions | |
| Measuring frequency channel occupancy using the technique used for frequency band measurement | |
| Measuring of low-level emissions from space stations at monitoring earth stations using noise reduction techniques | |
| Measuring sideband emissions of T-DAB and DVB-T transmitters for monitoring purposes | |
| MECHANICAL-DRIVE STEAM TURBINES | |
| MELAMINE/PHENOLIC MOLDING COMPOUND, FILLED | |
| METALLIC ACRYLIC ENAMEL, EXTERIOR QUALITY ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| Method for measurements of radio noise | |
| METHOD OF MEASURING THE MAXIMUM FREQUENCY DEVIATION OF FM BROADCAST EMISSIONS AT MONITORING STATIONS | |
| Methods for measurements of indoor radio environment | |
| Methods for measurements of radio noise | |
| Methods for measurements on digital broadcasting signals | |
| METHODS FOR THE MEASUREMENT OF RADIO INTERFERENCE AND THE DETERMINATION OF TOLERABLE LEVELS OF INTERFERENCE | |
| Methods of radio direction finding and location on time division multiple access and code division multiple access signals | |
| Mobile spectrum monitoring unit | |
| MONITORING OF THE RADIO COVERAGE OF LAND MOBILE NETWORKS TO VERIFY COMPLIANCE WITH A GIVEN LICENCE | |
| Monte Carlo simulation methodology for the use in sharing and compatibility studies between different radio services or systems | |
| MULTI-SERVICE TELECOMMUNICATION SYSTEMS | |
| National alternative allocation methods | |
| NATIONAL SPECTRUM MANAGEMENT DATA | |
| NECESSARY BANDWIDTH | |
| NEUTRALIZING AGENT | |
| NEW SPECTRALLY EFFICIENT TECHNIQUES AND SYSTEMS | |
| Noise and Sensitivity of Receivers - Section 1A - Spectrum Engineering and Computer-Aided Principles and Techniques | |
| NOISE AND SENSITIVITY OF RECEIVERS | |
| On-site accuracy measurements of a fixed DF system | |
| PAINTING, COIL SPRINGS | |
| PAINTING, FINISH ON CAST IRON | |
| PAPER, KRAFT CORD - REINFORCED | |
| PAPER, KRAFT CORD - TWISTED | |
| Performance evaluation of mobile direction finders in operational environment | |
| PERFORMANCE FUNCTIONS FOR DIGITAL MODULATION SYSTEMS IN AN INTERFERENCE ENVIRONMENT | |
| PHOSPHATE AND OIL | |
| PHOSPHATE COATING ON STEEL PARTS, PAINTED ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| PHOSPHATE COATING ON STEEL PARTS, WAXED ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| PHOSPHATE COATING ON STEEL PARTS, WITHOUT SUBSEQUENT TREATMENT ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| PHOSPHATE IRON | |
| PHOSPHATE SOLUTION, ZINC, ACCELERATOR | |
| PHOSPHATE SOLUTION, ZINC, NEUTRALIZING AGENT | |
| POLYETHYLENE, HIGH DENSITY - HIGH MELT INDEX | |
| POLYTETRAFLUOROETHYL ENE | |
| POLYURETHANE - FOAM | |
| POLYURETHANE ELASTOMER, SOFT QUALITY | |
| Pre and Post Solder Mask Application Cleaning Guidelines | |
| Precision of time information in output data of monitoring receivers | |
| PRESSED WOOD FIBERBOARD ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| PRESSURE SENSITIVE CLOTH TAPE, WATERPROOF | |
| PRIMER BLACK, SOLUBLE IN WATER | |
| PRIMER, AIR DRYING | |
| Procedures for Characterizing and Handling of Moisture/ Reflow Sensitive ICs | |
| Protection distance calculation between inductive systems and radiocommunication services using frequencies below 30 MHz | |
| Protection of fixed monitoring stations against interference from nearby or strong transmitters | |
| Protection of fixed monitoring stations against interference | |
| Protection of passive* services from unwanted emissions | |
| PROTECTION RATIOS FOR SPECTRUM SHARING INVESTIGATIONS | |
| Qualification and Performance of Permanent Solder Mask Amendment 1 | |
| Qualification and Performance of Permanent Solder Mask | |
| Qualification and Performance Specification of Permanent Solder Mask and Flexible Cover Materials | |
| Qualification and Performance Specification of Permanent Solder Mask | |
| Radiocommunication Data Dictionary for notification and coordination purposes | |
| SEALER, HEAT CURING - SOLVENT-TYPE | |
| SEALER, WINDSHIELDS AND BACKLITES | |
| SELECTIVITY OF RECEIVERS | |
| SELF ADHERING PLASTIC SHEET | |
| SELF ADHERING PVC-TAPE ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| SENSITIVITY OF RADIO RECEIVERS FOR CLASS OF EMISSIONS F3E | |
| SHARING BETWEEN THE BROADCASTING SERVICE AND THE FIXED AND/OR MOBILE SERVICES IN THE VHF AND UHF BANDS | |
| SILICONE RUBBER FOR ROTATING SHAFT OIL SEALS | |
| SOAP, SPECIAL TEST | |
| SOUND ABSORPTION FELT | |
| SOUND ABSORPTION, FIBER PADDING MILDEW RESISTANT | |
| Spectra and Bandwidth of Emissions | |
| Spectrum monitoring evolution | |
| Spectrum occupancy measurement and evaluation | |
| Spectrum occupancy measurement | |
| Spectrum occupancy measurements and evaluation | |
| Spectrum redeployment as a method of national spectrum management | |
| Spurious Emissions - Section 1A - Spectrum Engineering and Computer-Aided Principles and Techniques | |
| SPURIOUS EMISSIONS FROM SOUND AND TELEVISION BROADCAST RECEIVERS | |
| Spurious Emissions* | |
| Spurious Emissions | |
| Standard data exchange format for frequency band registrations and measurements at monitoring stations | |
| STEAM TURBINES FOR MECHANICAL DRIVE SERVICE | |
| STEEL, ALUMINUM CLAD | |
| Surface Mount Design and Land Pattern Standard | |
| TAPE, DOUBLE COATED, PRESSURE SENSITIVE | |
| Technical and operating parameters and spectrum requirements for short-range radiocommunication devices | |
| Technical and operating parameters and spectrum use for short-range radiocommunication devices | |
| Technical identification of digital signals | |
| Test procedure for determining the accuracy of TDOA systems | |
| Test procedure for measuring direction finder accuracy | |
| Test procedure for measuring direction finder immunity against multi-path propagation | |
| Test procedure for measuring direction finder sensitivity in the VHF/UHF frequency range | |
| Test procedure for measuring monitoring system field strength measurement accuracy in the VHF/UHF frequency range | |
| Test procedure for measuring the 3rd order intercept point (IP3) level of radio monitoring receivers | |
| Test procedure for measuring the noise figure of radio monitoring receivers | |
| Test procedure for measuring the properties of the IF filter of radio monitoring receivers | |
| Test procedure for measuring the scanning speed of radio monitoring receivers | |
| Test procedure for measuring the sensitivity of radio monitoring receivers using analogue-modulated signals | |
| The impact of power line high data rate telecommunication systems on radiocommunication systems below 30 MHz and between 80 and 470 MHz | |
| The impact of power line high data rate telecommunication systems on radiocommunication systems below 30 MHz | |
| The impact of power line high data rate telecommunication systems on radiocommunication systems below 470 MHz | |
| The protection of passive services from unwanted emissions | |
| The protection of safety services from unwanted emissions | |
| THERMO ELECTRIC SEALING STRIP | |
| THINNER, TOLUENE/XYLENE, LACQUER VISCOSITY REDUCTION | |
| THINNER | |
| UNDERBODY COATING, HEAT CURING ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| Unwanted emissions in the out-of-band domain falling into adjacent allocated bands | |
| Unwanted emissions in the out-of-band domain | |
| Unwanted emissions in the spurious domain* | |
| Unwanted emissions in the spurious domain | |
| USE OF RADIO NOISE DATA IN SPECTRUM UTILIZATION STUDIES | |
| Variation of the boundary between the out-of-band and spurious domains required for the application of Recommendations ITU-R SM.1541 and ITU-R SM.329 | |
| WEATHERSTRIP, SOLID TUBULAR, DECKLIDS, DISCONTINUED, | |
| WEATHERSTRIP, TUBULAR | |
| Wideband instantaneous bandwidth spectrum monitoring systems | |
| WINDLACE ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| WINDLACE |
| << Prev | Next >> |