Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
1000
1050
1100
1150
1200
1250
1300
1320
1330
1340
1350
1360
1370
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1390
1400
1410
1420
1430
1440
1450
1500
1550
1600
1620
| Product Name | Notes |
|---|---|
| Adhesives - Adhesives for Paper and Board, Packaging and Disposable Sanitary Products - Description and Assessment of the Setting Process | |
| Adjustable speed electrical power drive systems - Part 6: Guide for determination of types of load duty and corresponding current ratings | |
| Air quality - Performance evaluation of air quality sensor systems Part 2: Particulate matter in ambient air | |
| Air quality \x97 Performance evaluation of air quality sensor systems Part 1: Gaseous pollutants in ambient air | |
| Alarm systems - Alarm transmission systems and equipment Part 10: Requirements for remote access | |
| Alarm systems - Alarm transmission systems and equipment Part 7: Application guidelines | |
| Alarm systems - External perimeter security systems Part 1: System requirements | |
| Alarm systems - Intrusion and hold-up systems Part 2-11: Intrusion detectors - ALDDR | |
| Alarm systems - Intrusion and hold-up systems Part 2-8: Intrusion detectors - Shock detectors | |
| Alarm systems - Social alarm systems Part 9: IP Communications Protocol | |
| Alarm systems - Terms and definitions | |
| Alarm systems \x97 Alarm transmission systems and equipment Part 9: Requirements for common protocol for alarm transmission using the Internet protocol | |
| Alarm systems \x97 Intrusion and hold-up systems Part 11: Hold-up devices | |
| Alarm systems \x97 Intrusion and hold-up systems Part 12: Methods and requirements for setting and unsetting of Intruder Alarm Systems (IAS) | |
| Alarm systems \x97 Intrusion and hold-up systems Part 2-10: Intrusion detectors \x97 Lock state contacts (magnetic) | |
| Alarm systems \x97 Intrusion and hold-up systems Part 2-9: Intrusion detectors \x97 Active infrared beam detectors | |
| Alarm systems \x97 Intrusion and hold-up systems Part 9: Alarm verification \x97 Methods and principles | |
| Alarm systems \x97 Intrusion systems Part 5-1: Interconnections \x97 Requirements for wired Interconnection for I&HAS equipments located in supervised premises | |
| Alcohol interlocks - Test methods and performance requirements Part 3: Guidance for decision makers, purchasers and users | |
| Ambient air \x97 Determination of lung deposited surface area (LDSA) concentration using aerosol monitors based on diffusion charging | |
| Ambient air \x97 Determination of the concentration of levoglucosan \x97 Chromatographic method | |
| Animal feeding stuffs - Methods of sampling and analysis - PFGE typing of Lactobacilli, Pediococci, Enterococci and Bacilli in animal feeds | |
| Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation Guide | |
| Assessment of inadvertent initiation of bridge wire electro-explosive devices by radio-frequency radiation Guide | |
| Assignment of safety integrity requirements - Basic rationale | |
| Biometric data injection attack detection | |
| Biotechnology - Microorganisms - Report on the Criteria Used to Classify Group 1 Genetically Modified Microorganisms | |
| Building hardware - Master Key System data protection - Guidance | |
| Cable management systems (CMS) providing support for cables with intrinsic fire resistance | |
| Cable management systems - Design-for-recycling guidelines for PVC cable management products | |
| Cable networks for television signals, sound signals and interactive services - Part 10-1: Guidelines for the implementation of return paths in cable networks | |
| Cable networks for television signals, sound signals and interactive services Part 2-1: Electromagnetic compatibility measurements | |
| Cable networks for television signals, sound signals and interactive services Part 2-2: Interference issues for DVB-T reception in the presence of LTE base station signals | |
| Cable networks for television signals, sound signals and interactive services Part 2-3: LTE (4G) Interference Mitigation Filters | |
| Cable networks for television signals, sound signals and interactive services Part 3-3: Active wideband equipment for cable networks \x97 Methods of measurement of the maximum operating output level in the... | |
| Cable networks for television signals, sound signals and interactive services System guidelines for analogue optical transmission systems | |
| Cabling guidelines in support of 10 GBASE-T | |
| Characterisation of sludges Sludge management in relation to use or disposal | |
| Characterization of Sludges - Good Practice for Combined Incineration of Sludges and Household Wastes | |
| Characterization of Sludges - Good Practice for Sludges Incineration with and without Grease and Screenings | |
| Characterization of Sludges - Good Practice for Utilisation in Agriculture | |
| Characterization of waste - Guidance on the determination of the content of elements and substances in waste | |
| Characterization of waste \x97 Determination of selected low boiling point alcohols using gas chromatography with flame ionization detection after static head-space extraction (HS-GC-FID) | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Guidelines for the Purchase of Products | |
| Child care articles \x97 Tricycles \x97 Safety requirements and test methods | |
| Circular design of fishing gear and aquaculture equipment - Terms and definitions | |
| Classification of Grades of Steel - Examples of Classification Related to European Standards | |
| Clothes washing machines and washer-dryers for household and similar use - Method for the determination of rinsing effectiveness by measurement of the surfactant content at textile materials | |
| Clothes washing machines and washer-dryers for household and similar use \x97 Method for the determination of temperature inside the laundry load | |
| Clothes washing machines for commercial use - Methods for measuring the performance | |
| Coaxial cables used in cabled distribution networks Part 8: Repair and substitute of damaged buried cables | |
| Collection, logistics & treatment requirements for end-of-life household appliances containing volatile fluorocarbons or volatile hydrocarbons Part 2: Specification for de-pollution | |
| Collection, logistics & treatment requirements for WEEE Part 3-1: Specification for de-pollution \x97 General | |
| Collection, logistics & treatment requirements for WEEE Part 3-2: Technical specification for de-pollution \x97 Lamps | |
| Collection, logistics & treatment requirements for WEEE Part 3-3: Specification for de-pollution - WEEE containing CRTs and flat panel displays | |
| Collection, logistics & treatment requirements for WEEE Part 3-4: Specification for de-pollution - Temperature exchange equipment | |
| Collection, logistics & Treatment requirements for WEEE Part 3-5: Technical specification for de-pollution - Photovoltaic panels | |
| Collection, logistics & treatment requirements for WEEE Part 4: Specification for the collection and logistics associated with WEEE | |
| Compost and digestate properties when used in fertilizing products | |
| Conditions for use of EN 419221-5 as a qualified electronic signature or seal creation device | |
| Consideration on the use of OTDRs to measure return loss of single-mode optical fibre connections | |
| Construction products: Assessment of release of dangerous substances - Methods for the determination of N-nitrosamines in air samples derived by EN 16516 | |
| Construction products: Assessment of release of dangerous substances - Sampling and quantitative determination of asbestos in construction products | |
| Cycles - Electrically power assisted cycles - Anti-tampering measures | |
| Database on the characteristics of radio services | |
| Definitions related to material efficiency | |
| Dentistry Guidance on the classification of dental devices and accessories | |
| Description of the radio services database | |
| Design guideline for mechanically fastened roof waterproofing systems | |
| Design of fibre-polymer composite structures | |
| Design of glass structures Part 1: Basis of design and materials | |
| Design of glass structures Part 2: Design of out-of-plane loaded glass components | |
| Design of glass structures Part 3: Design of in-plane loaded glass components and their mechanical joints | |
| Design of glass structures Part 4: Glass selection relating to the risk of human injury - Guidance for specification | |
| Design of tensioned membrane structures | |
| Determination of cross-sectional area of conductors and selection of protective devices | |
| Determination of the acoustic properties of markings - The CPX measurement method | |
| Digital Chain of Custody for CBRNE Evidence Part 1: Overview and Concepts | |
| Digital Chain of Custody for CBRNE Evidence Part 2: Data Management and Audit | |
| Digital data communications for measurement and control Fieldbus for use in industrial control systems Part 1: Overview and guidance for the IEC 61158 series | |
| Digital Information Interchange in the Insurance Industry \x97 Electronic Premium Invoice \x97 Mapping to Electronic Invoice EN 16931-1:2017 | |
| District heating pipes \x97 Factory made flexible pipe systems \x97 Classification, requirements and test methods for bonded or non-bonded system with thermoplastic reinforced service pipes (TRSP) | |
| Durability of Wood and Wood-Based Products - Recommendations for Measurement of Emissions to the Environment from Treated Wood in Service | |
| Earthworks - Chemical tests Part 2: Determination of organic matter content by potassium permanganate method | |
| Earthworks - Soil treatment tests Part 2: Test of evaluation of the aptitude of a dry material to emit dust | |
| Earthworks \x97 Soil treatment tests Part 1: pH-test for determination of the lime requirement of soils for stabilization (Lime Fixation Point LFP, Lime Modification Optimum LMO) | |
| Electric cables - List of residual recognised national types | |
| Electric cables \x97 Extended application of test results | |
| Electric vehicle conductive charging system Part 3-1: DC EV supply equipment where protection relies on double or reinforced insulation \x97 General rules and requirements for stationary equipment | |
| Electric vehicle conductive charging system Part 3-2: DC EV supply equipment where protection relies on double or reinforced insulation - Particular requirements for portable and mobile equipment | |
| Electric vehicle wireless power transfer (WPT) systems Part 2: Specific requirements for communication between electric road vehicle (EV) and infrastructure | |
| Electric vehicle wireless power transfer (WPT) systems Part 3: Specific requirements for the magnetic field wireless power transfer systems | |
| Electric vehicles conductive charging system Part 3-5: DC EV supply equipment where protection relies on double or reinforced insulation - Pre-defined communication parameters and general application objects | |
| Electric vehicles conductive charging system Part 3-6: DC EV supply equipment where protection relies on double or reinforced insulation - Voltage converter unit communication | |
| Electric vehicles conductive charging system Part 3-7: DC EV supply equipment where protection relies on double or reinforced insulation - Battery system communication | |
| Electrical installation guide - Selection and erection of electrical equipment - Wiring systems - Limitation of temperature rise of connecting interfaces | |
| Electrical safety Classification of interfaces for equipment to be connected to information and communications technology networks | |
| Electricity metering data exchange - The DLMS/COSEM suite Part 8: SMITP B-PSK PLC communication profile for neighbourhood networks - Including: The Original-SMITP PLC B-PSK communication profile, The Original-SMITP Local data... | |
| Electricity metering data exchange \x97 Lower layer PLC profile using Adaptive Multi Carrier Spread-Spectrum (AMC-SS) modulation | |
| Electricity metering data exchange \x97 The DLMS/COSEM suite Part 8-4: Narrow-band OFDM PRIME PLC communication profile for neighbourhood networks | |
| Electricity metering data exchange \x97 The DLMS/COSEM suite Part 8-5: Narrow-band OFDM G3-PLC communication profile for neighbourhood networks | |
| Electricity metering data exchange \x97 The DLMS/COSEM suite Part 8-7: AMC-SS PLC communication profile for neighbourhood networks | |
| Electricity metering data exchange Part 4: Lower layer PLC profile using SMITP B-PSK modulation | |
| Electricity metering equipment (a.c.) - Severity levels, immunity requirements and test methods for conducted disturbances in the frequency range 2 kHz - 150 kHz | |
| Electromagnetic characteristics of linear cable management systems (CMS) | |
| Electromagnetic compatibility (EMC) \x97 Conducted emission requirements on the low voltage AC mains port in the frequency range 9 kHz to 150 kHz for equipment intended to operate in residential... | |
| Electromagnetic compatibility - Emission measurements in fully anechoic chambers | |
| Electromagnetic compatibility and Radio spectrum Matters (ERM); Report of the CENELEC/ETSI Joint Working Group in response to the EC letter ENTRP/F5/DP/MM/entr. f5.(2013)43164 to the ESOs | |
| Electronic fee collection - Measurement of interferences on tolling and tachograph devices from radio local area network devices operating in the 5,8 GHz frequency range - Test suite structure and... | |
| Electrostatics - Part 5-2: Protection of electronic devices from electrostatic phenomena - User guide | |
| Electrostatics Code of practice for the avoidance of hazards due to static electricity | |
| Environmental characterization of leachates from waste and soil using reproductive and toxicological gene expression in Daphnia magna | |
| Environmental statement specific to TC 20 - Electric cables | |
| Eurocode 3: Design of steel structures Part 1-101: Alternative interaction method for members in bending and compression | |
| Eurocode 4 \x97 Design of composite steel and concrete structures Part 1-101: Double and single skin steel concrete composite (SC) structures | |
| Eurocode 5: Design of Timber Structures - Structural design of timber-concrete composite structures - Common rules and rules for buildings | |
| European Professional Ethics Framework for the ICT Profession (EU ICT Ethics) | |
| European Scheme for the Classification of Gas Appliances According to the Method of Evacuation of the Products of Combustion (Types) | |
| Explosive atmospheres Part 32-1: Electrostatic hazards, guidance | |
| Explosive atmospheres Part 33: Equipment protection by special protection \x93s\x94 | |
| Explosive atmospheres Part 39: Intrinsically safe systems with electronically controlled spark duration limitation | |
| Explosive atmospheres Part 43: Equipment in adverse service conditions | |
| Explosive atmospheres Part 47: Equipment protection by 2-wire intrinsically safe Ethernet concept (2-WISE) | |
| External fire exposure to roofs in combination with photovoltaic (PV) arrays \x97 Test method(s) | |
| Fertilizers and liming materials - Determination of the chloride content by potentiometric titration | |
| Fertilizing products - Determination of the stability of fertilizing products containing micronutrient chelates at different pHs | |
| Fertilizing products - Determination of the stability of fertilizing products containing micronutrient complexes | |
| Fertilizing products - Stability of chelating and complexing agents | |
| Fibre optic access to end-user - A guideline to building of FTTX fibre optic network | |
| Field device tool (FDT) interface specification - Part 41: Object model integration profile - Common object model | |
| Field device tool (FDT) interface specification - Part 501: Communication implementation for common object model - IEC 61784 CPF 1 | |
| Field device tool (FDT) interface specification - Part 502: Communication implementation for common object model - IEC 61784 CPF 2 | |
| Field device tool (FDT) interface specification - Part 503-1: Communication implementation for common object model - IEC 61784 CP 3/1 and CP 3/2 | |
| Field device tool (FDT) interface specification - Part 503-2: Communication implementation for common object model - IEC 61784 CP 3/4, CP 3/5 and CP 3/6 | |
| Field device tool (FDT) interface specification - Part 506: Communication implementation for common object model - IEC 61784 CPF 6 | |
| Field device tool (FDT) interface specification - Part 509: Communication implementation for common object model - IEC 61784 CPF 9 | |
| Field device tool (FDT) interface specification - Part 515: Communication implementation for common object model - IEC 61784 CPF 15 | |
| Field device tool (FDT) interface specification Part 42: Object model integration profile \x96 Common Language Infrastructure | |
| Field device tool (FDT) interface specification Part 51-10: Communication implementation for common object model \x96 IEC 61784 CPF 1 | |
| Field device tool (FDT) interface specification Part 51-150: Communication implementation for common object model - IEC 61784 CPF 15 | |
| Field device tool (FDT) interface specification Part 51-20: Communication implementation for common object model \x96 IEC 61784 CPF 2 | |
| Field device tool (FDT) interface specification Part 51-31: Communication implementation for common object model \x97 IEC 61784 CP 3/1 and CP 3/2 | |
| Field device tool (FDT) interface specification Part 51-32: Communication implementation for common object model - IEC 61784 CP 3/4, CP 3/5 and CP 3/6 | |
| Field device tool (FDT) interface specification Part 51-60: Communication implementation for common object model - IEC 61784 CPF 6 | |
| Field device tool (FDT) interface specification Part 51-90: Communication implementation for common object model - IEC 61784 CPF 9 | |
| Field device tool (FDT) interface specification Part 52-150: Communication implementation for common language infrastructure - IEC 61784 CPF 15 | |
| Field device tool (FDT) interface specification Part 52-31: Communication implementation for common language infrastructure - IEC 61784 CP 3/1 and CP 3/2 | |
| Field device tool (FDT) interface specification Part 52-32: Communication implementation for common language infrastructure - IEC 61784 CP 3/4, CP 3/5 and CP 3/6 | |
| Field device tool (FDT) interface specification Part 52-90: Communication implementation for common language infrastructure - IEC 61784 CPF 9 | |
| Field device tool (FDT) interface specification Part 62: Field device tool (FDT) styleguide for common language infrastructure | |
| Field device tool interface (FDT) specification - Part 61: Device type manager (DTM) - Styleguide for common object model | |
| Fire detection and fire alarm systems Part 14: Guidelines for planning, design, installation, commissioning, use and maintenance | |
| Fire detection and fire alarm systems Part 32: Planning, design, installation, commissioning, use and maintenance of voice alarm systems | |
| Fire extinguishing systems in commercial kitchens \x97 System design, documentation, and test requirements \x97 Fire test procedures for plenum and ducts | |
| Fixed Installations for Railway Applications - Requirements for the validation of simulation tools used for the design of electric traction power supply systems Part 2: specific DC urban case | |
| Flexible sheets for waterproofing - Extrapolation rules for testing results on resistance to root penetration | |
| Foodstuff - Determination of pesticide residues by ethyl acetate extraction using GC- and LC-MS/MS (SweEt) | |
| Function blocks (FB) for process control - Part 4: EDD interoperability guideline | |
| Functional requirements for the electronic archiving services | |
| Functional safety - Safety instrumented systems for the process industry sector Part 0: Functional safety for the process industry and IEC 61511 | |
| Functional safety - Safety instrumented systems for the process industry sector Part 4: Explanation and rationale for changes in IEC 61511-1 from Edition 1 to Edition 2 | |
| Functional safety of electrical/electroni c/programmable electronic safety-related systems Part 0: Functional safety and IEC 61508 | |
| Gas infrastructure \x97 Quality of gas \x97 Hydrogen used in rededicated gas systems | |
| General Guidance on the Equipment Used for Inhaled Nitric Oxide Therapy | |
| General principles and requirements for testing of quality and nicotine levels of electronic cigarette liquids | |
| General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) Part 7: IT security and data protection \x97 User Guide | |
| Geographic Information - Overview | |
| Geographic Information - Processing - Query and Update: Spatial Aspects | |
| Geographic Information - Vocabulary | |
| Global Medical Device Nomenclature for the Purpose of Regulatory Data Exchange | |
| Growing media - Determination of specific parameters | |
| Guidance for production, testing and diagnostics of polymer insulators with respect to brittle fracture of core materials | |
| Guidance on how to conduct Round Robin Tests | |
| Guide for the application of aluminium electrolytic capacitors | |
| Guide for the application of the European Standard EN 50160 | |
| Guide to EMC Directive conformity of equipment designed for military purposes | |
| Guide to levels of competence required in laser safety | |
| Guidelines for developing ICT Professional Curricula as scoped by EN 16234-1 (e-CF) | |
| Guidelines for product committees on the preparation of standards related to human exposure from electromagnetic fields | |
| Guidelines for the application of EN 197-2 \x93Conformity Evaluation\x94 | |
| Guidelines for the safe operation of fitness centres during an infectious outbreak | |
| Guidelines for the use of EN 45545-2 for Ni-Cd batteries on board rolling stock | |
| Guidelines for the verification of household appliances under energy labelling and eco design | |
| Guidelines to achieving compliance with EC directives for alarm systems | |
| Health Informatics - Safety and Security Related Software Quality Standards for Healthcare (SSQS) | |
| Heat meter installation - Some guidelines for selecting, installation and operation of heat meters | |
| Helmets for S-EPAC riders | |
| High voltage direct current (HVDC) grid systems and connected converter stations \x97 Guideline and parameter lists for functional specifications Part 1: Guideline | |
| High voltage direct current (HVDC) grid systems and connected converter stations \x97 Guideline and parameter lists for functional specifications Part 2: Parameter lists | |
| High-voltage switchgear and controlgear - Part 303: Use and handling of sulphur hexafluoride (SF6) | |
| High-voltage switchgear and controlgear Part 208: Methods to quantify the steady state, power-frequency electromagnetic fields generated by HV switchgear assemblies and HV/LV prefabricated substations | |
| High-voltage switchgear and controlgear Part 307: Guidance for the extension of validity of type tests of AC metal and solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV... | |
| HVDC Grid Systems and connected Converter Stations - Guideline and Parameter Lists for Functional Specifications Part 1: Guidelines | |
| HVDC Grid Systems and connected Converter Stations \x96 Guideline and Parameter Lists for Functional Specifications Part 2: Parameter Lists | |
| Hydrogen applications \x97 Material compatibility evaluation and qualification \x97 Equipment used in commercial, industrial installations including gas burners, gas burning appliances and fuel gas infrastructures | |
| Hydrometry - Sedimentation - Measurements required for effective sediment management and control at river structures | |
| Identification Card Systems - Intersector Thin Flexible Cards - Acceptance Criteria | |
| Identification card systems - Intersector thin flexible cards - Security features | |
| Implementation Guide for Functional Standards Prepared by CEN/TC 234 "Gas Supply" | |
| Implementation of EN 729 on Quality Requirements for Fusion welding of Metallic Materials | |
| In vitro diagnostic Next Generation Sequencing (NGS) workflows Part 1: Human DNA examination | |
| In vitro diagnostic Next Generation Sequencing (NGS) workflows Part 2: Human RNA examination | |
| Industrial communication networks - Profiles - Assessment guideline for safety devices using IEC 61784-3 functional safety communication profiles (FSCPs) | |
| Industrial process control systems \x97 Guidelines for evaluating process control systems Part 1: Specifications | |
| Industrial, scientific and medical equipment \x97 Radio-frequency disturbance characteristics \x97 Requirements for radio beam wireless power transfer (RB-WPT) equipment | |
| Industrial-process measurement, control and automation \x96 Framework for functional safety and security | |
| Information Concerning Plugs for Household Appliances Covered by CLC/TC 61 Used in the Various CENELEC Countries | |
| Information technology - Cabling installation Part 99-2: Mitigation and protection from electrical interference | |
| Information technology - Data centre facilities and infrastructures Part 4-31: Key performance indicators for Resilience | |
| Information technology - Data centre facilities and infrastructures Part 5-1: Maturity Model for Energy Management and Environmental Sustainability | |
| Information technology - Data centre facilities and infrastructures Part 99-2: Recommended practices for environmental sustainability | |
| Information technology - Data centre facilities and infrastructures Part 99-3: Guidance to the application of EN 50600 series | |
| Information technology - Generic cabling systems Part 99-3: Home cabling infrastructures up to 50 m in length to support simultaneous and non simultaneous provision of applications | |
| Information technology - Implementation of BCT applications using cabling in accordance with EN 50173-4 | |
| Information technology \x97 Cabling installation Part 99-1: Remote powering | |
| Information technology \x97 Data centre facilities and infrastructures Part 2-10: Earthquake risk and impact analysis | |
| Information technology \x97 Data centre facilities and infrastructures Part 99-1: Recommended practices for energy management | |
| Inorganic fertilizers - Determination of chelating and complexing agents | |
| Inorganic fertilizers - Determination of particle size of ammonium nitrate fertilizers of high nitrogen content | |
| Inorganic fertilizers - Determination of pH of a solution of ammonium nitrate fertilizers of high nitrogen content | |
| Inorganic fertilizers - Determination of specific contaminants | |
| Inorganic fertilizers - Determination of specific inhibitors | |
| Inorganic fertilizers - Determination of specific micronutrients | |
| Inorganic fertilizers - Determination of specific nutrients | |
| Inorganic fertilizers - Determination of specific parameters in ammonium nitrate fertilizers of high nitrogen content | |
| Inorganic fertilizers - Determination of specific parameters | |
| Inorganic fertilizers - Determination of the chloride content in ammonium nitrate fertilizers of high nitrogen content | |
| Inorganic fertilizers - Determination of the copper content in ammonium nitrate fertilizers of high nitrogen content | |
| Inorganic micronutrient fertilizers - Determination of the chelated micronutrient content and the chelated fraction of micronutrients Part 1: Treatment with a cation exchange resin | |
| Inorganic micronutrient fertilizers - Determination of the chelated micronutrient content and the chelated fraction of micronutrients Part 2: Determination of EDTA, DTPA, HEEDTA, IDHA or EDDS | |
| Inorganic micronutrient fertilizers - Determination of the concentration of free, chelated or complexed micronutrients and the chelating and/or complexing agents present in compound inorganic micronutrient fertilizers | |
| Intelligent transport systems - eSafety - Incident Support - Information System (ISIS) Architecture | |
| Intelligent Transport Systems \x97 eSafety \x97 eCall Interface for PSAPs to access cargo and dangerous goods databases | |
| Interoperability framework requirement specification | |
| Interpretation Document of EN 3 Portable Fire Extinguishers | |
| Interruption indexes | |
| Investigation Results on Electromagnetic Interference in the Frequency Range below 150 kHz | |
| Light and lighting - Commissioning of lighting systems in buildings | |
| Lighting Applications \x97 Adaptive Emergency Escape Lighting Systems | |
| Lightning Protection System Components (LPSC) Part 1: Testing requirements for metal sheets' joints used in LPS | |
| Lightning Protection System Components (LPSC) Part 2: Specific testing requirements for LPS components used in explosive atmospheres | |
| Lightning protection systems - Symbols | |
| List of interpretations on the EN 60730 series \x93Automatic electrical controls for household and similar use\x94 | |
| Low-voltage surge protective devices - Surge protective devices for specific application including d.c. Part 12: Selection and application principles - SPDs connected to photovoltaic installations | |
| Low-voltage surge protective devices Part 22: Surge protective devices connected to telecommunications and signalling networks - Selection and application principles | |
| Low-voltage surge protective devices Part 32: Surge protective devices connected to the DC side of photovoltaic installations \x97 Selection and application principles | |
| Low-voltage switchgear and controlgear - Guidance for the development of embedded software | |
| Low-voltage switchgear and controlgear \x97 Electromagnetic compatibility assessment for switchgear and controlgear and their assemblies | |
| Luer Connectors - A Report to CEN CHeF from the CEN Forum Task Group "Luer Fittings" | |
| Machine Readable Cards - Healthcare Applications - Logical Data Structures and Concepts for Different Card Technologies for Use by Patients in Health Applications | |
| Machine Readable Cards - Healthcare Applications - Logical Organisation of Data on Healthcare Professional Cards | |
| Masonry Cement - Testing for Workability (Cohesivity) | |
| Material efficiency - Household and similar electrical appliances - Assessment of applicability of EN 4555X | |
| Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for Fine Needle Aspirates (FNAs) Part 1: Isolated cellular RNA | |
| Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for Fine Needle Aspirates (FNAs) Part 2: Isolated proteins | |
| Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for Fine Needle Aspirates (FNAs) Part 3: Isolated genomic DNA | |
| Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for urine and other body fluids - Isolated cell free DNA | |
| Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Isolated circulating cell free RNA from plasma | |
| Molecular in vitro diagnostic examinations \x97 Specifications for pre-examination processes for exosomes and other extracellular vesicles in venous whole blood \x97 DNA, RNA and proteins | |
| Nanotechnologies - Nano- and micro- scale scratch testing | |
| Non-Destructive Testing - Generic NDE Data Format Model | |
| Non-destructive testing - Test method for determining residual stresses by synchrotron x-ray diffraction | |
| OPC unified architecture Part 1: Overview and concepts | |
| OPC Unified Architecture Part 2: Security model | |
| Open Smart Grid Protocol (OSGP) | |
| Organic and organo-mineral fertilizers - Determination of the chromium (VI) content by chromotography | |
| Organic and organo-mineral fertilizers - Determination of the content of specific elements by ICP-AES after extraction by water | |
| Organic and organo-mineral fertilizers - Determination of the dry matter content | |
| Organic and organo-mineral fertilizers - Determination of the inorganic arsenic content | |
| Organic and organo-mineral fertilizers - Determination of the mercury content | |
| Organic and organo-mineral fertilizers - Determination of the nitrogen content | |
| Organic and organo-mineral fertilizers - Determination of the total organic carbon (TOC) content by dry combustion | |
| Organic and organo-mineral fertilizers - Digestion by aqua regia for subsequent determination of elements | |
| Organic and organo-mineral fertilizers \x97 Detection of specific pathogens | |
| Organic and organo-mineral fertilizers \x97 Determination of specific elements | |
| Organic and organo-mineral fertilizers \x97 Determination of specific parameters | |
| Organic and organo-mineral fertilizers \x97 Determination of the biuret content by high-performance liquid chromatography (HPLC) | |
| Organic and organo-mineral fertilizers \x97 Determination of the total content of specific elements by ICP-AES after digestion by aqua regia | |
| Organic and organo-mineral fertilizers \x97 Extraction by water for subsequent determination of elements | |
| Organic fertilizers, organo-mineral fertilizers, inorganic fertilizers and liming materials - Determination of the chloride content | |
| Organic soil improvers - Determination of specific parameters | |
| Organic, organo-mineral and inorganic fertilizers - Detection of Enterocococaceae | |
| Organic, organo-mineral and inorganic fertilizers - Detection of Escherichia coli | |
| Organic, organo-mineral and inorganic fertilizers - Detection of Salmonella spp. | |
| Organo-mineral fertilizers - Determination of chelating and complexing agents | |
| Organo-mineral fertilizers - Determination of the fraction of complexed micronutrients | |
| Organo-mineral fertilizers - Extraction of phosphorus, which is soluble in neutral ammonium citrate | |
| Organo-mineral fertilizers - Identification of chelating agents Part 1: Determination of EDTA, HEEDTA and DTPA by ion chromatography | |
| Organo-mineral fertilizers - Identification of chelating agents Part 2: Determination of Fe chelated by [o,o] EDDHA, [o,o] EDDHMA and HBED, or the amount of chelating agents by ion pair chromatography... | |
| Organo-mineral fertilizers - Identification of complexing agents Part 1: Method using UV-Vis spectrophotometry and gravimetry | |
| Organo-mineral fertilizers - Identification of complexing agents Part 2: Method using high-performance liquid chromatography (HPLC) | |
| Organo-mineral fertilizers \x97 Determination of the chelated micronutrient content and the chelated fraction of micronutrients by treatment with a cation exchange resin | |
| Organo-mineral fertilizers \x97 Extraction of phosphorus by formic acid | |
| Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging and their release into the environment Part 1: Requirements for measuring and... | |
| Packaging Marking and material identification system | |
| Packaging Optimization of energy recovery from packaging waste | |
| Paints and varnishes - Coating materials and coating systems for exterior wood Part 12: Ultraviolet and visible radiation transmittance | |
| Paints and varnishes - Coating materials and coating systems for exterior wood Part 15: Assessment of bleeding of coloured wood extractives through a coating by means of a water immersion... | |
| Paints and varnishes - Coating materials and coating systems for exterior wood Part 8: Determination of the adhesion on wood after water exposure by a double-X-cut test | |
| Paints and varnishes - Coating materials and coating systems for exterior wood Part 9: Determination of pull-off strength after water exposure | |
| Paper and board - Guidance on the application of Term 2.2 "Prohibited materials" of EN 643:2014 | |
| Passive components to be used in optical fibre communication systems - Product specifications - Part 2-1: SC(SC2)-PC connector-type fixed optical attenuators using IEC 60793-2 Category B1.1 singlemode fibre | |
| Passive components to be used in optical fibre communication systems - Product specifications - Part 2-2: SC(SC2)-APC connector-type fixed optical attenuators using IEC 60793-2 Category B1.1 singlemode fibre | |
| Personal identification - Biometric group access control | |
| Personal identification - European enrolment guide for biometric ID documents (EEG) | |
| Personal identification \x97 European guide for biometric recognition applications based on ID documents (ERG) | |
| Plant biostimulants - Claims Part 1: General principles | |
| Plant biostimulants - Claims Part 3: Tolerance to abiotic stress resulting from the use of a plant biostimulant | |
| Plant biostimulants - Claims Part 4: Determination of quality traits resulting from the use of a plant biostimulant | |
| Plant biostimulants - Claims Part 5: Determination of availability of confined nutrients in the soil or rhizospherev | |
| Plant biostimulants - Detection of Salmonella spp. | |
| Plant biostimulants - Detection of Shigella spp. | |
| Plant biostimulants - Detection of Staphylococcus aureus | |
| Plant biostimulants - Detection of Vibrio spp. | |
| Plant biostimulants - Determination of Azotobacter spp. | |
| Plant biostimulants - Determination of dry matter | |
| Plant biostimulants - Determination of Enterococcaceae | |
| Plant biostimulants - Determination of Escherichia coli | |
| Plant biostimulants - Determination of inorganic arsenic | |
| Plant biostimulants - Determination of mycorrhizal fungi | |
| Plant biostimulants - Determination of phosphonates | |
| Plant biostimulants - Determination of Rhizobium spp. | |
| Plant biostimulants - Determination of specific elements Part 1: Digestion by aqua regia for subsequent determination of elements | |
| Plant biostimulants - Determination of specific elements Part 2: Determination of total content of Cd, Pb, Ni, As, Cr, Cu and Zn | |
| Plant biostimulants - Determination of specific elements Part 3: Determination of mercury | |
| Plant biostimulants - Determination of the anaerobic plate count | |
| Plant biostimulants - Determination of the pH for liquid microbial plant biostimulants/pH in microbial products - Determination of pH | |
| Plant biostimulants - Determination of the yeast and mould content | |
| Plant biostimulants - Preparation of sample for microbial analysis | |
| Plant biostimulants - Sampling and sample preparation Part 1: Sampling | |
| Plant biostimulants - Sampling and sample preparation Part 2: Sample preparation | |
| Plant biostimulants - Terminology | |
| Plant biostimulants \x97 Claims Part 2: Nutrient use efficiency resulting from the use of a plant biostimulant | |
| Plant biostimulants \x97 Detection of Listeria monocytogenes | |
| Plant biostimulants \x97 Determination of Azospirillum spp | |
| Plant biostimulants \x97 Determination of chloride | |
| Plant biostimulants \x97 Determination of chromium(VI) | |
| Plant biostimulants \x97 Determination of microorganisms' concentration | |
| Plant biostimulants \x97 Determination of the quantity (indicated by mass or volume) | |
| Plastics piping systems for non-pressure underground conveyance of surface water - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 3: Assessment of conformity | |
| Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) Part 2: Guidance for the assessment of conformity | |
| Portable electrical apparatus for the measurement of combustion flue gas parameters \x97 Guide to their use in the process of commissioning, servicing and maintaining gas fired central heating boilers | |
| Postal services \x97 Harmonized track and trace events Part 1: Forward flow | |
| Pressure equipment and assemblies Part 8: Proof test | |
| Protection Profiles for TSP cryptographic modules Part 1: Overview | |
| Protection Profiles for TSP cryptographic modules Part 2: Cryptographic module for CSP signing operations with backup | |
| Protection Profiles for TSP Cryptographic modules Part 3: Cryptographic module for CSP key generation services | |
| Protection Profiles for TSP cryptographic modules Part 4: Cryptographic module for CSP signing operations without backup | |
| Pulp, paper and paperboard \x96 Determination of anthraquinone in extracts from pulp, paper and paperboard | |
| Radio interference characteristics of overhead power lines and high-volt age equipment Part 1: Description of phenomena | |
| Radio interference characteristics of overhead power lines and high-voltage equipment Part 2: Methods of measurement and procedure for determining limits | |
| Radio interference characteristics of overhead power lines and high-voltage equipment Part 3: Code of practice for minimizing the generation of radio noise | |
| Railway Application \x97 Fixed Installations \x97 Specification for reversible d.c. substations | |
| Railway applications - Communication means between safety equipment and man-machine interfaces (MMI) | |
| Railway applications - Communication, signalling and processing systems - Application Guide for EN 50129 - Part 1: Cross-acceptance | |
| Railway applications - Communication, signalling and processing systems - Application guide for EN 50129 Part 2: Safety assurance | |
| Railway applications - Communication, signalling and processing systems - European Rail Traffic Management System - Driver-Machine interface - Part 7: Specific Transmission Modules | |
| Railway applications - Communication, signalling and processing systems - European Rail Traffic Management System - Driver-machine Interface Part 2: Ergonomic arrangements of GSM-R information | |
| Railway applications - Communications, signalling and processing systems - ERTMS/ETCS - External signalling for lines equipped with ERTMS/ETCS Level 2 | |
| Railway applications - Compatibility between rolling stock and train detection systems - Part 3: Compatibility with axle counters | |
| Railway applications - Compatibility between rolling stock and train detection systems Part 2: Compatibility with track circuits | |
| Railway applications - Current collection systems - Technical criteria for the interaction between pantograph and overhead contact lines on electrified roads | |
| Railway applications - Cybersecurity | |
| Railway applications - Fixed installations - Particular requirements for AC switchgear Part 4: AC metal-enclosed traction switchgear | |
| Railway applications - Interference limits of existing track circuits used on European railways | |
| Railway applications - Radio remote control system of traction vehicle for freight traffic in multiple traction operation | |
| Railway applications - Rolling stock - Intercommunication between vehicles and train/wayside - Part 1: Data dictionary and rules for functional standardisation | |
| Railway applications - Rolling stock - Intercommunication between vehicles and train/wayside - Part 2: Technical contents of standardization work in the field of intercommunication | |
| Railway applications - Systematic allocation of safety integrity requirements | |
| Railway applications - The specification and demonstration of Reliability, Availability, Maintainability and Safety (RAMS) - Part 2: Guide to the application of EN 50126-1 for safety | |
| Railway applications \x97 Communication, signalling and processing systems \x97 European Rail Traffic Management System \x97 Driver-Machine Interface Part 3: Ergonomic arrangements of non ETCS information | |
| Railway applications \x97 Driver's cab train display controller (TDC) Part 1: General architecture | |
| Railway applications \x97 Driver\x92s cab Train Display Controller (TDC) Part 2: Display systems FIS | |
| Railway applications \x97 Driver\x92s cab train Display Controller (TDC) Part 3: Other train systems FIS | |
| Railway applications \x97 Fixed installations and rolling stock \x97 Interface requirements between charging infrastructure with dedicated contact line sections and electric traction units with onboard electric traction energy storages and... | |
| Railway applications \x97 Functional Interface Specification \x97 Door System | |
| Railway applications \x97 Functional Interface Specification \x97 Pantograph System | |
| Railway applications \x97 Investigations on vehicles to quantify track loading in curve radii below 250 m | |
| Railway applications \x97 Rolling stock \x97 3-phase shore (external) supply system for rail vehicles | |
| Railway applications \x97 Train Modes functional interface specification | |
| Railway applications The specification and demonstration of Reliability, Availability, Maintainability and Safety (RAMS) Part 3: Guide to the application of EN 50126-1 for rolling stock RAMS | |
| Railway applications\x97 Communication, signalling and processing systems \x97 European Rail Traffic Management System \x97 Driver\x97Machine Interface Part 1: General principles for the presentation of ERTMS/ETCS/GSM-R information | |
| Reasonably Foreseeable Use Conditions when referring to EMF Exposure Assessment | |
| Recommendations for dimensional co-ordination between enclosures and built-in devices for rail fixing for household and similar installations | |
| Recommendations for shielded enclosures | |
| Recommendations on filters for shielded enclosures | |
| Report on the use of EN 45545-2 and EN 45545-5 for electronic equipment on board rolling stock | |
| Residential wood logs burning appliances \x97 Overload test procedures | |
| Resilient, textile, laminate and modular mechanical locked floor coverings \x97 Circular economy and sustainability \x97 Recommendations/guid elines for design | |
| Resistibility requirements for equipment having (a) telecommunication port(s) | |
| Road vehicles \x97 Post Shredder Technology recycling \x97 Design recommendations for plastic products | |
| Rotating electrical machines Part 25: AC electrical machines used in power drive systems - Application guide | |
| Rotating electrical machines Part 30-2: Efficiency classes of variable speed AC motors (IE-code) | |
| Rotating electrical machines Part 31: Selection of energy-efficient motors including variable speed applications - Application guide | |
| Safeguards against accidentally caused candle flame ignition for audio/video, communication and information technology equipment | |
| Safety of amusement rides and devices: Manufacturing Quality Recommendations for Machinery Components | |
| Safety of household and similar electrical appliances Interpretations related to European Standards within the scope of CENELEC/TC 61 | |
| Safety of machinery \x97 Guidelines on functional safety of safety-related control system | |
| Safety of machinery \x97 Security aspects related to functional safety of safety-related control systems | |
| Safety of toys - Categorization of slime type materials | |
| Satellite signal distribution over a single coaxial cable \x97 Second generation | |
| Satellite signal distribution over a single coaxial cable Part 10: Implementation guideline | |
| Screening tests for nickel release from alloys and coatings in items that come into direct and prolonged contact with the skin | |
| Security for industrial automation and control systems Part 1-5: Scheme for IEC 62443 security profiles | |
| Security for industrial automation and control systems Part 6-1: Security evaluation methodology for IEC 62443-2-4 | |
| Security requirements for trustworthy systems managing certificates and time-stamps | |
| Security Requirements for Trustworthy Systems Supporting Server Signing | |
| Semiconductor die products - Part 3: Recommendations for good practice in handling, packing and storage | |
| Semiconductor die products Part 4: Questionnaire for die users and suppliers | |
| Shell Boilers - Part 14: Guideline for Involvement of an Inspection Body Independent of the Manufacturer | |
| Smart grid projects in Europe | |
| Smart tracker chips - Feasibility study on the inclusion of RFID in Electrical and Electronic Equipment for WEEE management | |
| Soil improvers - Determination of specific parameters | |
| Soil Improvers and Growing Media - Guidelines for the Safety of Users, the Environment and Plants | |
| Soil Improvers and Growing Media - Labelling, Specifications and Product Schedules | |
| Soil improvers and growing media - Sampling and sample preparation | |
| Soil improvers and growing media - Terminology | |
| SPD application in conjunction with Class II equipment | |
| Specification and verification of energy consumption for railway rolling stock | |
| Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-5: In situ measurements of disturbing emissions produced by physically large equipment | |
| Specification for radio disturbance and immunity measuring apparatus and methods - Part 3: CISPR technical reports | |
| Specification for radio disturbance and immunity measuring apparatus and methods \x97 Part 4-5: Uncertainties, statistics and limit modelling \x97 Conditions for the use of alternative test methods | |
| Specification for radio disturbance and immunity measuring apparatus and methods Part 3: CISPR technical reports | |
| Specification for radio disturbance and immunity measuring apparatus and methods Part 4-1: Uncertainties, statistics and limit modelling Uncertainties in standardized EMC tests | |
| Specification for radio disturbance and immunity measuring apparatus and methods Part 4-3: Uncertainties, statistics and limit modelling Statistical considerations in the determination of EMC compliance of mass-produced products | |
| Specification for radio disturbance and immunity measuring apparatus and methods Part 4-4: Uncertainties, statistics and limit modelling - Statistics of complaints and a model for the calculation of limits for... | |
| Specification for radio disturbance and immunity measuring apparatus and methods Part 4-4: Uncertainties, statistics and limit modelling \x97 Statistics of complaints and a model for the calculation of limits for... | |
| Specification for radio disturbance and immunity measuring apparatus and methods Part 4-4: Uncertainties, statistics and limit modelling Statistics of complaints and a model for the calculation of limits | |
| Specification for radio disturbance and immunity measuring apparatus and methods Part 4-5: Uncertainties, statistics and limit modelling \x97 Conditions for the use of alternative test methods | |
| Specification for radio disturbance and immunity measuring apparatus and methods Part 4-5: Uncertainties, statistics and limit modelling Conditions for the use of alternative test methods | |
| Specification for radio disturbance and immunity measuring apparatus and methods Part 4-6: Uncertainties, statistics and limit modelling - Statistics on radio frequency interference (RFI) and verification by measurements in the... | |
| Standardization and the liberalization of the energy market | |
| Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method | |
| Stationary source emissions \x97 Determination of the mass concentration of formaldehyde \x97 Automatic method | |
| Stationary source emissions \x97 Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs Part 5: Long-term sampling of PCDDs/PCDFs and PCBs | |
| Statistical verification of partial factors for buildings according to Eurocode EN 1993-1-1 Annex E | |
| Study Report on Electromagnetic Interference between Electrical Equipment/Systems in the Frequency Range Below 150 kHz | |
| Survey of Resolutions of the CENELEC General Assembly | |
| Technical Guidelines for Radial HVDC Networks | |
| Technical Requirements for Current Collectors for ground-level feeding system on road vehicles in operation | |
| Technical Specification for ground-based feeding systems for dynamic electric road charging infrastructure on road vehicles in operation | |
| Television broadcast receivers and associated equipment Immunity characteristics Methods of objective picture assessment | |
| Terms and definitions for welding purposes in relation with EN 1792 | |
| Test method on electromagnetic emissions Part 1: Electronic control gear for single- and double-capped fluorescent lamps | |
| Test method on electromagnetic emissions Part 2: Electronic control gear for discharge lamps excluding fluorescent lamps | |
| Thermoplastics pipes and fittings \x97 Design for recycling guidelines | |
| Three-level approach for a set of cybersecurity requirements for cloud services | |
| Tracked Change (Redline) - Electromagnetic characteristics of linear cable management systems (CMS) | |
| Tracked Changes (Redline) - Alarm systems - Alarm transmission systems and equipment Part 9: Requirements for common protocol for alarm transmission using the Internet Protocol (IP) | |
| Tracked Changes (Redline) - Cable management systems (CMS) providing support for cable with intrinsic fire resistance | |
| Tracked Changes (Redline) - Clothes washing machines and washer-dryers for household and similar use - Method for the determination of rinsing effectiveness by measurement of the surfactant content at textile... | |
| Tracked Changes (Redline) - Description of the radio services database | |
| Tracked Changes (Redline) - Environmental characterization of eluates from leaching of waste and soil using reproductive and toxicological gene expression in Daphnia magna | |
| Tracked Changes (Redline) - Explosive atmospheres Part 32-1: Electrostatic hazards, guidance | |
| Tracked Changes (Redline) - Fibre optic access to end-user \x97 A guideline to building of FTTX fibre optic network | |
| Tracked Changes (Redline) - Field device tool (FDT) interface specification Part 41: Object model integration profile \x96 Common object model | |
| Tracked Changes (Redline) - Field device tool (FDT) interface specification Part 51-10: Communication implementation for common object model \x96 IEC 61784 CPF 1 | |
| Tracked Changes (Redline) - Field device tool (FDT) interface specification Part 51-150: Communication implementation for common object model - IEC 61784 CPF 15 | |
| Tracked Changes (Redline) - Guidelines for product committees on the preparation of standards related to human exposure from electromagnetic fields | |
| Tracked Changes (Redline) - Guidelines for the use of EN 45545-2 for Ni-Cd batteries on board rolling stock | |
| Tracked Changes (Redline) - Information technology \x97 Implementation of BCT applications using cabling in accordance with EN 50173-4 | |
| Tracked Changes (Redline) - Low-voltage surge protective devices Part 22: Surge protective devices connected to telecommunications and signalling networks \x97 Selection and application principles | |
| Tracked Changes (Redline) - Paints and varnishes - Coating materials and coating systems for exterior wood - Part 9: Determination of pull-off strength | |
| Tracked Changes (Redline) - Portable electrical apparatus for the measurement of combustion flue gas parameters \x97 Guide to their use in the process of commissioning, servicing and maintaining gas fired... | |
| Tracked Changes (Redline) - Radio interference characteristics of overhead power lines and high-voltage equipment Part 1: Description of phenomena | |
| Tracked Changes (Redline) - Radio interference characteristics of overhead power lines and high-voltage equipment Part 2: Methods of measurement and procedure for determining limits | |
| Tracked Changes (Redline) - Radio interference characteristics of overhead power lines and high-voltage equipment Part 3: Code of practice for minimizing the generation of radio noise | |
| Tracked Changes (Redline) - Railway applications - Compatibility between rolling stock and train detection systems - Part 3: Compatibility with axle counters | |
| Tracked Changes (Redline) - Railway applications - Cybersecurity | |
| Tracked Changes (Redline) - Railway applications - Driver's cab train display controller (TDC) Part 1: General architecture | |
| Tracked Changes (Redline) - Railway applications \x97 Communication, signalling and processing systems \x97 European Rail Traffic Management System \x97 Driver-Machine Interface Part 2: Ergonomic arrangements of GSM-R information | |
| Tracked Changes (Redline) - Railway applications \x97 Communication, signalling and processing systems \x97 European Rail Traffic Management System \x97 Driver-Machine Interface Part 3: Ergonomic arrangements of non ETCS information | |
| Tracked Changes (Redline) - Railway applications \x97 Driver's cab Train Display Controller (TDC) \x97 Part 2: Display systems FIS | |
| Tracked Changes (Redline) - Railway applications\x97Comm unication, signalling and processing systems \x97 European Rail Traffic Management System \x97 Driver\x97Machine Interface Part 1: General principles for the presentation of ERTMS/ETCS/GSM-R information... | |
| Tracked Changes (Redline) - Rotating electrical machines \x97 Part 31: Selection of energy-efficient motors including variable speed applications \x97 Application guidelines | |
| Tracked Changes (Redline) - Safety of household and similar electrical appliances \x97 Interpretations related to European Standards in the EN 60335 series | |
| Tracked Changes (Redline) \x96 Field device tool (FDT) interface specification Part 51-20: Communication implementation for common object model \x96 IEC 61784 CPF 2 | |
| Tracked Changes (Redline) \x96 Field device tool (FDT) interface specification Part 51-32: Communication implementation for common object model - IEC 61784 CP 3/4, CP 3/5 and CP 3/6 | |
| Tracked Changes (Redline) \x96 Field device tool (FDT) interface specification Part 51-60: Communication implementation for common object model - IEC 61784 CPF 6 | |
| Tracked Changes (Redline) \x96 Information technology - Data centre facilities and infrastructures Part 99-1: Recommended practices for energy management | |
| Tracked Changes (Redline) \x96 Information technology \x96 Data centre facilities and infrastructures Part 99-2: Recommended practices for environmental sustainability | |
| Transportable Gas Cylinders - Porous Masses for Acetylene Cylinders | |
| Tumble dryers for commercial use \x97 Methods for measuring the performance | |
| Unfired Pressure Vessels - Part 7: Guidance on the Use of the Conformity Procedures | |
| Ventilation for Buildings - Experimental Determination of Mechanical Energy Loss Coefficients of Air Handling Components | |
| Water Boilers and Auxiliary Installations - Part 17: Guideline for the Involvement of an Inspection Body Independent of the Manufacturer | |
| Wind energy generation systems Part 26-3: Availability for wind power stations | |
| Wind turbines - Electromagnetic compatibility | |
| Wind turbines Part 14: Declaration of apparent sound power level and tonality values | |
| Wind turbines Part 26-1: Time-based availability for wind turbine generating systems | |
| Wind turbines Part 26-2: Production-based availability for wind turbines | |
| Workplace exposure - Detection and characterization of airborne NOAA using electron microscopy - Rules for sampling and analysis | |
| Workplace exposure \x97 Direct-reading low-cost particulate matter sensors for measuring airborne NOAA \x97 Guidelines for application |
| << Prev | Next >> |