AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| 6 GHz WAS/RLAN; Harmonised Standard for access to radio spectrum | |
| Accessibility requirements for ICT products and services | |
| ACCUMULATORS FOR USE IN PHOTOVOLTAIC SYSTEMS -- PART 1: SAFETY - TEST REQUIREMENTS AND PROCEDURES | |
| ACCUMULATORS FOR USE IN PHOTOVOLTAIC SYSTEMS -- PART 2: PERFORMANCE - TEST REQUIREMENTS AND PROCEDURES | |
| Adhesives for load-bearing timber structures- Test methods- Part 5: Determination of the conventional assembly time | |
| Admixtures for concrete, mortar and grout - Test methods - Part 10: Determination of water soluble chloride content | |
| Advanced technical ceramics -- Part 1-1: Electrical properties - Method of test for short term electric strength | |
| Advanced technical ceramics -- Part 1-2: Electrical properties - Determination of the surface and volume resistivity in the temperature range 20º C to 800º C | |
| Aerospace series — Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) — Classification : 1 100 MPa (at ambient temperature) / 425 °C | |
| Aerospace series — Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS2 coated Aerospace — Classification : 1 100 MPa (at ambient temperature) / 425 °C | |
| Aerospace series — Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification : 1 100 MPa (at ambient temperature) / 425 °C | |
| Aerospace series — Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, MoS2 lubricated — Classification : 1 100 MPa (at ambient temperature) / 315 °C | |
| Aerospace series — Nuts, self-locking, hexagonal with captive washer, — In heat resisting steel FE-PA92HT (A286), silver coated Classification: 1100 MPa/425 °C | |
| Aerospace series — Spectral quality of LED luminaires used with photoluminescent marking systems | |
| Aerospace series - Aesthetical acceptance parameters for cabin equipment | |
| Aerospace series - Aircraft integrated air quality and pressure standards, criteria and determination methods | |
| Aerospace series - Aircraft internal air quality standards, criteria and determination methods | |
| Aerospace series - Aluminium pigmented organic coatings - Coating methods | |
| Aerospace series - Aluminium pigmented organic coatings for fasteners - Technical specification | |
| Aerospace series - Bearing spherical plain, metal to metal in corrosion resisting steel - Wide series - Dimensions and loads - Inch series | |
| Aerospace series - Bearing spherical plain, metal to metal, in corrosion resisting steel, cadmium plated - Wide series - Dimensions and loads - Inch series | |
| Aerospace series - Bolt, External Spiral Drive, flange head, tension and shear application | |
| Aerospace series - Bolt, normal hexagonal head, coarse tolerance normal shank, medium length thread, in heat resisting nickel base alloy, aluminium IVD coated - Classification: 1 250 MPa (at ambient... | |
| Aerospace series - Bolts, double hexagon head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-P100HT (Inconel 718), uncoated - Classification: 1 275 MPa/650 °C | |
| Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated - Classification: 1 550 MPa (at ambient temperature)/650 °C - Technical specification | |
| Aerospace series - Bolts, normal hexagonal head, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1 275 MPa/650 °C | |
| Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS2 coated - Classification: 1 100 MPa (at ambient temperature)/315 °C | |
| Aerospace series - Bolts, T-head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-P100HT (Inconel 718), uncoated - Classification: 1 275 MPa/650 °C | |
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 001: Technical specification | |
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 033: Stainless steel banding band, style Z, for attachment of individual and/or overall screens... | |
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 062 : Cable outlet, style K, 90°, for heat shrinkable boot, shielded, sealed, self... | |
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 063 : Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed, self... | |
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 064: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed, self locking... | |
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 065: Cable outlet, style K, 90°, for heat shrinkable boot, shielded, sealed, self locking... | |
| Aerospace series - Cable, electrical, for signal transmission - Part 009: Cable, coaxial, light weight, 50 ohms, 180 °C, type KW (light WN) - Product standard | |
| Aerospace series - Cable, electrical, for signal transmission - Part 010: Cable, coaxial, light weight, 50 ohms, 200 °C, type KX (light WD) - Product standard | |
| Aerospace series - Cables, electrical, aircraft use — Test methods — Part 203: Dimensions | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 603: Resistance to wet arc tracking | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 604: Resistance to dry arc propagation | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 605: Wet short-circuit test | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 701: Strippability and adherence of insulation to the conductor | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 804: Velocity of propagation | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 805: Characteristic impedance | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 806: Attenuation | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 811: Unbalance attenuation | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 812: Return loss (VSWR) | |
| Aerospace series - Cables, optical - Part 001: Technical specification | |
| Aerospace series - Circuit breakers - Test methods - Part 101: Management of the retention of qualification | |
| Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A - Part 001: Technical specification | |
| Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A - Part 001: Technical specification | |
| Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 1 A to 25 A - Part 001: Technical specification | |
| Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A - Part 001: Technical specification | |
| Aerospace series - Connector, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 027: Rack and panel rear mounted plug for 2 and 4 modules, series 3 -... | |
| Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 001: Technical specification | |
| Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 001: Technical specification | |
| Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 001: Technical specification | |
| Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 009: Rack and panel plug for 2 and 4 modules, series 3 - Product standard... | |
| Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 012: Flange mounting receptacle 2 and 4 modules, series 3 - Product standard | |
| Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 015: Round chimney for accessory (1 per module cavity), 2 and 4 modules - Product... | |
| Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 018: Protective cover for 1, 2 and 4 module receptacles series 2 and 3 -... | |
| Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 023: Tooling for assembly of receptacle coding component - Product standard | |
| Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 025: Single module receptacle - Product standard | |
| Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 C to 175 C - Part 005: Female coding and attachment... | |
| Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 001: Technical specification | |
| Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 003: Connectors with female contacts -... | |
| Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 004: Connectors with male contacts -... | |
| Aerospace series - Copper or copper alloy lightweight conductors for electrical cables - Product standard (Normal and tight tolerances) | |
| Aerospace series - Design and installation of aircraft electrical and optical interconnection systems | |
| Aerospace series - Electrical contacts used in elements of connection - Part 002: List and utilization of contacts | |
| Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part 003: Class T - Product standard | |
| Aerospace series - Environmental testing - Durability of the displays by general usage | |
| Aerospace series - Environmental testing - Test Xb: Abrasion of markings, letterings, surfaces and materials caused by rubbing fingertips and hands | |
| Aerospace series - Fibre optic systems - Handbook - Part 001: Termination methods and tools | |
| Aerospace series - Fibre optic systems - Handbook - Part 002: Test and measurement | |
| Aerospace series - Fibre optic systems - Handbook - Part 003: Looming and installation practices | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods | |
| Aerospace series - General technical specification for standard parts | |
| Aerospace series - Hermetically sealed relays 2PDT, 4PDT and 6PDT — Part 001: Technical specification | |
| Aerospace series - Hermetically sealed relays 2PDT, 4PDT and 6PDT, 10 AMP - Part 010: Product standard | |
| Aerospace series - Insert, MJ screw thread, helical coil, self-locking tanged insertion drive, in heat resisting nickel base alloy NI-PH2801 (Inconel X750), silver plated | |
| Aerospace series - Insert, MJ screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004 | |
| Aerospace series - Inserts, screw threads, helical coil, self-locking, tanged insertion drive, in heat resisting nickel base alloy NI-PH2801 (Inconel X750) | |
| Aerospace series - Mechanical transfer contact, fibre optic contact Multi connectors - Part 101: MT male contact 12 ways - Technical specification | |
| Aerospace series - Mechanical transfer contact, fibre optic contact Multi connectors - Part 102: MT female contact 12 ways - Technical specification | |
| Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 001: General rules | |
| Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 002: Specific rules for aluminium, aluminium alloys and magnesium alloys | |
| Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 003: Specific rules for heat-resisting alloys | |
| Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 004: Specific rules for titanium and titanium alloys | |
| Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 005: Specific rules for steels | |
| Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 006: Specific rules for filler metals and brazing | |
| Aerospace series - Nut, self-locking, clip, in heat resisting steel FE PA2601 (A286), uncoated - Classification: 1 100 MPa (at ambient temperature)/425 °C | |
| Aerospace series - Nut, self-locking, clip, in heat resisting steel FE PA92HT (A286), silver coated - Classification: 1 100 MPa (at ambient temperature)/425 °C | |
| Aerospace series - Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286), classification: 1 100 MPa (at ambient temperature)/650 °C - Technical specification | |
| Aerospace series - Nuts, self-locking, MJ threads, in heat-resisting nickel base alloy NI-PH2601 (Inconel 718), MoS2 coated - Classification: 1 550 MPa (at ambient temperature)/425 °C - Technical specification | |
| Aerospace series - P, Q and saddle clamps with rubber cushion - Technical Specification | |
| Aerospace series - Rectangular optical connector, modular - Operating temperature 125 °C, for EN 4734-10X: MT contacts - Part 001: Technical specification | |
| Aerospace series - Rectangular optical connector, modular - Operating temperature 125 °C, for EN 4734-10X: MT contacts - Part 002: Performance specification | |
| Aerospace series - Rectangular optical connector, modular - Operating temperature 125 °C, for EN 4734-10X: MT contacts - Part 003: Module double MT contacts, series 2 - Product standard | |
| Aerospace series - Screw, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1 100 MPa... | |
| Aerospace series - Screw, 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient... | |
| Aerospace series - Screw, 100° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at... | |
| Aerospace series - Screw, hexagon head, flanged, with six-lobe recess, composite, inch series - Technical Specification | |
| Aerospace series - Screw, hexagon head, flanged, with six-lobe recess, composite, inch series | |
| Aerospace series - Screw, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature)/235 °C | |
| Aerospace series - Screw, pan head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature)/235 °C... | |
| Aerospace series - Screw, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315... | |
| Aerospace series - Screws, reduced pan head, offset cruciform recess, relieved shank, long thread, in heat resisting steel FEPA92HT (A286), silver plated - Classification: 900 MPa/650 °C | |
| Aerospace series - Standardized measurement methods for comfort and living space criteria for aircraft passenger seats | |
| Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Bars for machining - De = 100 mm - 1 080 MPa = Rm = 1... | |
| Aerospace series - Steel GX5CrNiCuNb16-4 (1.4525) - Homogenized, solution treated and precipitation hardened - Investment casting - De = 50 mm - Rm = 900 MPa | |
| Aerospace series - Steel X5CrNiCu17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Bars - a or D = 200 mm - Rm = 1 310 MPa... | |
| Aerospace series - Steel X5CrNiCu17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Bars - a or D = 200 mm - Rm = 930 MPa | |
| Aerospace series - Test methods for metallic materials - Constant amplitude strain-controlled low cycle fatigue testing | |
| Aerospace series - Test methods for metallic materials - Constant-amplitude force-controlled low-cycle fatigue testing | |
| Aerospace series - Test methods for metallic materials - Determination of fatigue crack growth rates using Corner-Cracked (CC) test pieces | |
| Aerospace series - Test procedures for electromechanical all-or-nothing relays | |
| Aerospace series - Unmanned Aircraft Systems - Part 002: Direct Remote identification | |
| Aerospace series - Unmanned Aircraft Systems - Part 004: Lighting requirements | |
| Aerospace series - Unmanned Aircraft Systems - Part 005: Verification method for the Geocaging function | |
| Aerospace series - Unmanned Aircraft Systems - Part 006: Means to terminate flight, requirements, and verification | |
| Aerospace series - Unmanned Aircraft Systems - Part 007: General product requirements for UAS of classes C5 and C6 | |
| Aerospace series - Unmanned Aircraft Systems - Part 008: C5 Accessories kits | |
| Aerospace series - Use of regrinds and recycled materials in thermoplastic parts | |
| Aerospace series - Washers, tab, in heat resisting steel, passivated | |
| Aerospace series - Wire and cable marking process, UV Laser | |
| Alarm systems - CCTV surveillance systems for use in security applications - Part 5-2: IP Video Transmission Protocols | |
| Alarm systems - Intrusion and hold-up systems -- Part 4: Warning devices | |
| ALARM SYSTEMS CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS. PART 7: APPLICATION GUIDELINE. | |
| ALARM SYSTEMS. ACCESS CONTROL SYSTEMS FOR USE IN SECURITY APPLICATIONS. PART 1: SYSTEM REQUIREMENTS. | |
| ALARM SYSTEMS. CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS. PART 2-1: BLANCK AND WHITE CAMERAS. | |
| ALARM SYSTEMS. INTRUSION SYSTEMS. PART 1: GENERAL REQUIREMENTS. | |
| ALARM SYSTEMS. INTRUSION SYSTEMS. PART 6: POWER SUPPLIES | |
| ALARM SYSTEMS. INTRUSION SYSTEMS. PART 7: APPLICATION GUIDELINES | |
| ALARM SYSTEMS. PART 5: ENVIRONMETAL TEST METHODS. | |
| Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties | |
| APPROVAL TESTING OF WELDERS. FUSION WELDING. PART 4: NICKEL AND NICKEL ALLOYS (ISO/DIS 9606-4:1995) | |
| APPROVAL TESTING OF WELDERS. FUSION WELDING. PART 5: TITANIUM AND TITANIUM ALLOYS (ISO/DIS 9606-5:1995) | |
| AUTOMATIC CHANNEL INSTALLATION (ACI) | |
| AUTOMATIC CHANNELS INSTALLATION | |
| Basic standard on measurement and calculation procedures for human exposure to electric, magnetic and electromagnetic fields (0 Hz - 300 GHz) | |
| Bitumen and bitunimous binders - Determination of dynamic viscosity of bituminous emulsions - Rotating spindle viscometer method | |
| CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES. PART 10: SYSTEM PERFORMANCE FOR RETURN PATHS | |
| CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICALINSTALLATI ONS. PART 2-3: PARTICULAR REQUIREMENTS FOR SLOTTED CABLE TRUNKING SYSTEMS INTENDED FOR INSTALLATION IN CABINETS. | |
| CABLED DISTRIBUTION SYSTEMS FOR TELEVISION, SOUND AND INTERACTIVE MULTIMEDIA SIGNALS. PART 9: INTERFACES FOR CATV/SMATV HEADENDS AND SIMILAR PROFESSIONAL EQUIPMENT. | |
| CABLES FOR SIGNS AND LUMINOUS-DISCHARGE-T UBE INSTALLATIONS OPERATING FROM A NO-LOAD RATED OUTPUT VOLTAGE EXCEEDING 1 KV BUT NOT EXCEEDING 10 KV. | |
| Central safety power supply systems | |
| CHARACTERISTICS OF DAB RECEIVERS | |
| CHARACTERISTICS OF DVB RECEIVERS | |
| Coaxial cables - Part 9-1: Sectional specification for coaxial cables for analogue and digital signal transmission - Indoor drop cables for systems operating at 5 MHz - 1 000 MHz... | |
| COAXIAL CABLES USED IN CABLED DISTRIBUTION NETWORKS. PART 5: SECTIONAL SPECIFICATION FOR INDOOR DROP CABLES FOR USE IN NETWORKS OPERATING AT FREQUENCIES BETWEEN 5 MHZ AND 2150 MHZ. | |
| COAXIAL CABLES USED IN CABLED DISTRIBUTION NETWORKS. PART 6: SECTIONAL SPECIFICATION FOR OUTDOOR DROP CABLES FOR USE IN NETWORKS OPERATING AT FREQUENCIES BETWEEN 5 MHZ AND 2150 MHZ. | |
| COMMON INTERFACE SPECIFICATION FOR CONDITIONAL ACCESS AND OTHER DIGITAL VIDEO BROADCASTING DECODER APPLICATIONS. | |
| Common test methods for cables under fire conditions - Heat release and smoke production measurement on cables during flame spread test -- Part 2-1: Procedure for classification in Euroclasses C... | |
| Common test methods for cables under fire conditions - Heat release and smoke production measurement on cables during flame spread test -- Part 2-2: Procedure for classification in Euroclass B... | |
| COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS. MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS. PART 1: APPARATUS. | |
| COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS. MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS. PART 2: PROCEDURE. | |
| COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS. TEST FOR RESISTANCE TO VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED CONDUCTOR OR CABLE. PART 1: APPARATUS. | |
| COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS. TEST FOR RESISTANCE TO VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED CONDUCTOR OR CABLE. PART 2: PROCEDURES. SECTION 1: 1 KW PRE-MIXED... | |
| COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS. TEST FOR RESISTANCE TO VERTICAL FLAME PROPAGATION FOR ASINGLE INSULATED CONDUCTOR OR CABLE. PART 2: PROCEDURES. SECTION 2: DIFFUSION FLAME. | |
| COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS. TEST ON GASES EVOLVED DURING COMBUSTION OF MATERIAL FROM CABLES. PART 2: PROCEDURES. SECTION 2: DIFUSION FLAMEOF DEGREE OF ACIDITY OF GASES... | |
| COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS. TEST ON GASES EVOLVED DURING COMBUSTION OF MATERIAL FROM CABLES. PART 2: PROCEDURES. SECTION 3: DETERMINATION OF DEGREE OF ACIDITY OF GASES... | |
| COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS. TEST ON GASES EVOLVED DURING COMBUSTION OF MATERIALS FROM CABLES. PART 1: APPARATUS. | |
| COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS. TEST ON GASES EVOLVED DURING COMBUSTION OF MATERIALS FROM CABLES. PART 2: PROCEDURES. SECTION 1: DETERMINATION OF THE AMOUNT OF HALOGEN ACID... | |
| Communication cables - Part 2-34: Common design rules and construction - Polyethylene sheathing compound for outdoor optical fibre cables | |
| Communication cables - Specifications for test methods -- Part 1-17: Electrical test methods - Exogenous Crosstalk ExNEXT | |
| Communication cables - Specifications for test methods -- Part 4-16: Environmental test methods - Circuit integrity under fire conditions | |
| CONDUCTIVE CHARGING FOR ELECTRIC VEHICLES. PART 1: GENERAL CONSIDERATION | |
| CONDUCTIVE CHARGING FOR ELECTRIC VEHICLES. PART 2: CONECTION OF AN ELECTRIC VEHICLE TO AN A.C./D.C. SUPPLY | |
| CONDUCTIVE CHARGING OF ELECTRIC VEHICLES. PART 3: A.C. CHARGING STATION | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 1-7: Type LC-PC duplex terminated on IEC 60793-2 category A1a and A1b... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 10-1: Type MU-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 12-1: Type SC-PC and SC- APC fan-out using IEC 60793-2 category B1.1... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 13-2: Type LX.5-PC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 13-3: Type LX.5-APC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 16-1: Type LF3 APC simplex terminated on IEC 60793-2-50 category B1.1 and... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 4-1: Type SC-PC duplex terminated on IEC 60793-2 category A1a and A1b... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 4-4: Type SC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 7-4: LC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 9-2: Type MT-RJ terminated on IEC 60793-2 category B1.1 singlemode fibre | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -- Part 11-1: Type MF terminated on IEC 60793-2-50 Category B1.1 and B1.3 singlemode... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -- Part 14-1: Patch cords with EN 60793-2-50 single mode category B1.1 and B1.3... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -- Part 15-1: Type MPO with PPS ferrules terminated on IEC 60793-2 category A1a... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -- Part 2-2: FC/APC 8 terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -- Part 3-1: Type SG terminated on IEC 60793-2-10 Category A1a, A1b or equivalent... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -- Part 6-1: Type SC-RJ terminated on IEC 60793-2 category A1a and A1b multimode... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -- Part 6-2: SC-RJ single mode terminated on IEC 60793-2-50 category B1.1 and B1.3... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -- Part 7-2: LC-PC duplex terminated on IEC 60793-2 category B1.1 singlemode fibre | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -- Part 7-4: LC-PC simplex terminated on IEC 60793-2 category B1.1 singlemode fibre | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -- Part 8-10: Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -- Part 8-11: Type LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -- Part 8-12: Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -- Part 8-13: Type LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -- Part 8-2: Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -- Part 8-3: LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -- Part 8-4: LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -- Part 8-5: LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -- Part 8-6: LSH-HR simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -- Part 8-7: LSH-PC terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre,... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -- Part 8-8: LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -- Part 8-9: LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications Part 15-1: Type MPO with 12 fibre PPS ferrules terminated on EN 60793-2 category... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Produst specifications- Part 6-2: Type SC-RJ terminated on IEC 60793-2 category B1.1 singlemode fibre | |
| Connectors sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 10-2: MU-APC singlemode terminated on IEC 60793-2 category B1 fibre | |
| CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS PROXIMITY SENSORS, D.C. INTERFACE FOR PROXIMITY SENSORS AND SWITCHING AMPLIFIERS (NAMUR) | |
| CONVERSION ADPTORS FOR INDUSTRIAL USE. | |
| CUSTOMER PREMISES CABLING FOR INFORMATION TECHNOLOGY -- PART 1: ISDN BASIC ACCESS | |
| Cybersecurity requirements for products with digital elements - Part 1-2: Principles for cyber resilience | |
| Cybersecurity requirements for products with digital elements - Part 1-3: Vulnerability Handling | |
| Cybersecurity requirements for products with digital elements - Vocabulary | |
| DIGITAL AUDIO BROADCASTING SYSTEM - SPECIFICATION OF THE DAB COMMAND SET FOR RECEIVER (DCSR) | |
| DIGITAL AUDIO BROADCASTING SYTEM-PRELIMINARY SPECIFICATION OF THE RECEIVER DATA INTERFACE (RDI) | |
| District heating pipes - Factory made flexible pipe systems - Joint casing systems | |
| District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene... | |
| DOMESTIC AND SIMILAR ELECTRONIC EQUIPEMENT INTERCONNECTION REQUIREMENTS: AV.LINK. PART 2-2: BASIC SYSTEM ORIENTED COMMANDS. | |
| DOMESTIC AND SIMILAR ELECTRONIC EQUIPMENT INTERCONNECTION REQUIREMENTS: AV.LINK. PART 2-3: SYSTEM ORIENTED APPLICATION | |
| DOMESTIC COOKING APPLIANCES BURNING GAS FUEL. PART 1-2: SAFETY. APPLIANCE HAVING FORCED-CONVECTION OVENS AND/OR GRILLS | |
| DOMESTIC COOKING APPLIANCES BURNING GAS FUEL. PART 2-2: RATIONAL USE OF ENERGY. APPLIANCES HAVING FORCED-CONVECTION OVENS AND/OR GRILLS | |
| Durability of wood and wood-based products - Natural durability of solid wood - Guide to the durability requirements for wood to be used in hazard classes | |
| EARTH-MOVING MACHINERY. SAFETY. PART 10:REQUIREMENTS FOR TRENCHERS | |
| EARTH-MOVING MACHINERY. SAFETY. PART 11:REQUIREMENTS FOR LANDFILL COMPACTORS | |
| EARTH-MOVING MACHINERY. SAFETY. PART 7: REQUIREMENTS FOR TRACTOR SCRAPERS | |
| EARTH-MOVING MACHINERY. SAFETY. PART 8: REQUIREMENTS FOR GRADERS | |
| EARTH-MOVING MACHINERY. SAFETY. PART 9: REQUIREMENTS FO PIPELAYERS | |
| Electrical apparatus for potentially explosive atnospheres - Intrinsically safe electrical systems "i" - Group II systems for gas atmospheres | |
| Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of fixed gas detection systems | |
| Electrical apparatus for the detection of carbon monoxide in domestic premises, caravans and boats - Guide on the selection, installation, use and maintenance | |
| ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST. PART 1-1: CONSTRUCTION AND TESTING | |
| ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST. PART 1-2: SELECTION, INSTALLATION AND MAINTENANCE | |
| Electrical equipment for furnaces and ancillary equipment - Part 1: Requirements for application design and installation | |
| Electrical equipment for furnaces and ancillary equipment - Part 2: Requirements for design, development and type approval of safety devices and subsystems | |
| ELECTRICAL INSULATING PROTECTIVE CLOTHING FOR LOW-VOLTAGE INSTALLATIONS. | |
| ELECTROMAGNETIC COMPABILITY (EMC). PRODUCT STANDARD FOR MEASURING RELAYS AND PROTECTION EQUIPMENT | |
| ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for Broadband and Wideband Data Transmission Systems; Harmonised Standard for ElectroMagnetic Compatibility | |
| Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen | |
| ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER AND SOCIAL ALARM SYSTEMS. | |
| ELECTROMAGNETIC COMPATIBILITY FOR POWER TRANSFORMERS. | |
| Electronic Signatures and Trust Infrastructures (ESI); Certificate Profiles; Part 3: Certificate profile for certificates issued to legal persons | |
| Electrostatic hand-held spraying equipment - Safety requirements - Hand-held spraying equipment for non-ignitable coating materials | |
| End user multi-pair cables used in high bit rate telecommunication networks -- Part 1: Aerial cables | |
| End user multi-pair cables used in high bit rate telecommunication networks -- Part 2: Duct and buried cables | |
| ENERGY EFFICIENCY OF ELECTRIC LAMPS FOR HOUSEHOLD USE. MEASUREMENT METHODS | |
| ERECTION AND OPERATION OF ELECTRICAL TEST EQUIPMENT | |
| Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-10: Sealed fibre splice closures type 2, category G, for FTTH optical distribution... | |
| Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-5: Sealed closures for air blown fibre microduct, type 1, for category S... | |
| Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-8: Microduct connectors, for air blown optical fibres, Type 1 | |
| Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-1: Fibre management system, splice wall box, for category C & G | |
| Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-2: Singlemode mechanical fibre splice | |
| Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-3: Singlemode optical fibre fusion splice protectors | |
| Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-4: Fibre management system, modular splice and connector wall box, for category C... | |
| Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-5: Wall outlet | |
| Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-6: Multimode mechanical fibre splice for use in an outdoor protected environment (Cat... | |
| Fibre organisers and closures to be used in optical fibre communication systems - Product specifications -- Part 2-2: Sealed pan fibre splice closures Type 1, for category S & A... | |
| Fibre organisers and closures to be used in optical fibre communication systems - Product specifications -- Part 2-3: Sealed inline fibre splice closures Type 1, for category S & A... | |
| Fibre organisers and closures to be used in optical fibre communication systems - Product specifications -- Part 2: General and guidance for optical fibre cable joint closures, protected microduct closures,... | |
| Fibre organisers and closures to be used in optical fibre communications systems - Product specifications -- Part 2-9: Non-sealed closures for air blown fibre microduct cable, for category S & | |
| Fibre organizers and closures to be used in optical fibre communication systems - Product specifications - Part 3-8: Fibre management system, terminal equipment box type 1 for category C | |
| Fixed installations and rolling stock for railway applications - Technical criteria for the coordination between electric traction power supply systems and rolling stock to achieve interoperability - Part 1: General... | |
| FLEXIBLE CABLES FOR LIFTS. | |
| Fly ash for concrete - Part 2: Conformity evaluation | |
| Gas detectors - Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 1: Test methods and performance requirements | |
| GASEOUS EMISSIONS PRODUCED BY TRACTION BATTERIES. VENTILATION AND GENERAL SAFETY REQUIREMENTS FOR CLOSED CHARGING AREAS | |
| GENERAL CRITERIA FOR SUPPLIER'S DECLARATION OF CONFORMITY (ISO/IEC GUIDE 22:1996) | |
| GENERAL REQUIREMENTS FOR ASSESSMENT AND ACREDITATION OF CERTIFICATION/REGIST RATION BODIES. | |
| GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGIST RATION OF QUALITY | |
| GENERAL REQUIREMENTS FOR BODIES OPERATING PRODUCT CERTIFICATION SYSTEMS (PROPOSED REVISION OF ISO/IEC GUIDE 40) (ISO/CASCO 228:1995) | |
| GENERAL REQUIREMENTS FOR HEARING AIDS | |
| GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES | |
| Generic standard for hearing aids. | |
| Glass in building - Determination of luminous and solar characteristics of glazing - Part 1: non-light-scattering materials | |
| GLOVES AND MITTS WITH MECHANICAL PROTECTION FOR ELECTRICAL PURPOSES | |
| GUIDE FOR PROCUREMENT - HIGH POWER CONVERTORS (STATIC TYPE) FOR POWER PLANTS. | |
| GUIDE FOR PROCUREMENT. CONTROL AND INSTRUMENTATION. OPERATION AND MONITORING EQUIPMENT | |
| GUIDE FOR PROCUREMENT. ELECTRICAL EQUIPMENT LV/MV CABLES. | |
| GUIDE FOR PROCUREMENT. ELECTRICAL EQUIPMENT. CABLING SYSTEMS. | |
| GUIDE FOR PROCUREMENT. GENERATORS DRIVEN BY TURBINE. | |
| GUIDE FOR PROCUREMENT. PIPEWORK AND VALVES. HIGH PRESSURE PIPING INCLUDING SUPPORTS | |
| GUIDE FOR PROCUREMENT. TURBINE AUXILIARIES. COOLING WATER SYSTEMS | |
| GUIDE FOR THE USE AND FOR PARTICULAR DESIGN FEATURES FOR POWER TRANSFORMERS AND REACTORS WITH HIGHEST VOLTAGE FOR EQUIPMENT Um EXCEEDING 1 KV, PERMANENTLY INCORPORATED IN BUILDINGS. | |
| GUIDES FOR PROCUREMENT- BOILER AUXILIARIES - COAL HANDLING AND BULK STORAGE PLANT | |
| GUIDES FOR PROCUREMENT- TURBINE AUXILIARIES - MOISTURE SEPARATOR REHEATER | |
| GUIDES FOR PROCUREMENT- TURBINE GROUP - GAS TURBINES | |
| GUIDES FOR PROCUREMENT- TURBINES - STEAM TURBINE | |
| GUIDES FOR PROCUREMENT- TURBINES AUXILIARIES - CRANES | |
| GUIDES FOR PROCUREMENT- WIND TURBINES | |
| GUIDES FOR PROCUREMENT. TURBINES. HYDRAULIC MACHINES. | |
| Heating boilers - Part 2: Heating boilers with forced draught burners - Special requirements for boilers with atomizing oil burners | |
| Heating boilers - Test code for heating boilers for atomizing oil burners | |
| HEATING BOILERS. HEATING BOILERS WITH FORCED DRAUGHT BURNERS. PART 4: WITH OUTPUTS UP TO 70 KW AND A MAXIMUM OPERATING PRESSURE OF 3 BAR. TERMINOLOGY, SPECIAL REQUIREMENTS, TESTING AND MARKING. | |
| High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes... | |
| High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 8: Classification and specifications for design laminates | |
| High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 9: Classification and specifications for alternative core laminates | |
| Home and Building Electronic Systems (HBES) - Part 5-1: Media and media dependent layers - Power line for HBES Class 1 | |
| Home and Building Electronic Systems (HBES) - Part 5-2: Media and media dependent layers - Network based on HBES Class 1, Twisted Pair | |
| Home and Building Electronic Systems (HBES) - Part 5-3: Media and media dependent layers - Radio frequency | |
| Home and Building Electronic Systems (HBES) -- Part 7-1: System management - Management procedures | |
| HOME AND BUILDING ELECTRONIC SYSTEMS (HBES). PART 2-2: SYSTEM OVERVIEW. GENERAL TECHNICAL REQUIREMENTS. | |
| Household and similar electrical appliances - Safety - Particular requirements for commercial electric conveyor dishwashing machines | |
| HOUSEHOLD ELECTRIC THERMAL STORAGE ROOM HEATERS. METHODS FOR MEASURING PERFORMANCE. | |
| Implants for surgery - Active implantable medical devices - Part 1: General requirements for safety, marking and for information to be provided by the manufacturer | |
| Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 1: General requirements | |
| INDUSTRIAL COMMUNICATIONS SUBSYSTEM BASED ON ISO 11898 (CAN) FOR CONTRoLLER-DEVICE INTERFACES - PART 3: SMART DISTRIBUTED SYSTEM (SDS) | |
| Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces -- Part 4: CANopen | |
| Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces -- Part 5: Functional safety communication based on EN 50325-4 | |
| Information technology - Cabling installation - Part 3: Installation planning and practices outside buildings | |
| Information technology - Generic cabling systems - Part 6: Distributed building services | |
| Installation and operation of electrical test stations | |
| INSTALLATION OF ELECTRICAL APPARATUS IN AREAS ENDANGERED BY EXPLOSIVE SUBSTANCES. | |
| LEAD AND LEAD ALLOYS - LEAD AND LEAD ALLOY SHEATHS AND SLEEVES OF ELECTRIC CABLES | |
| Lead-acid starter batteries -- Part 2: Dimensions of batteries and marking of terminals | |
| Lead-acid starter batteries. General requirements, methods of test and numbering. | |
| LIGHTING COLUMNS - PART 4: SPECIFICATION FOR REINFORCED AND PRESTRESSED CONCRETE LIGHTING COLUMNS. | |
| LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR. CONTROLLER AND DEVICE INTERFACE SYSTEMS. ACTUATOR SENSOR INTERFACE (AS-I). | |
| MAINS EQUIPMENT AND SIMILAR APPARATUS. RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS FOR CONSUMER'S CONTROL BOARDS IN LOW-VOLTAGE INSTALLATIONS. | |
| Masonry cement - Part 1: Composition, specifications and conformity criteria | |
| MEASURING AND MONITORING EQUIPMENT FOR TESTING THE ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V AC AND 1500 V DC. PART 4: EQUIPMENT FOR MEASURING RESISTANCE. | |
| MEASURING AND MONITORING EQUIPMENT FOR TESTING THE ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V AC AND 1500 V DC. PART 8: INSULATION MONITORING DEVICES FOR IT... | |
| MEASURING AND MONITORING EQUIPMENT FOR TESTING THE ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 VAC AND 1500 V DC. PART 5: EQUIPMENT FOR MEASURING EARTH RESISTANCE | |
| MEASURING AND MONITORING EQUIPMENT FOR TESTING THE ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 VAC AND 1500 V DC. PART 6: MEASURING EQUIPMENT FOR TESTING THE EFFECTIVENESS... | |
| MEASURING AND MONITORING EQUIPMENT FOR TESTING THE ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 VAC AND 1500 V DC. PART 7: EQUIPMENT FOR INDICATING PHASE SEQUENCE | |
| MEDICAL GLOVES FOR SINGLE USE. PART 3: TEST METHODS FOR BIOCOMPATIBILITY AND REQUIREMENTS FOR BIOCOMPATIBILITY LABELLING. | |
| METHOD OF TEST FOR RESISTANCE TO FIRE UNPROTECTED SMALL CABLES FOR USE IN EMERGENCY CIRCUITS. | |
| METRIC CABLE GLANDS FOR ELECTRICAL INSTALLATIONS. | |
| Miniature connecting devices for the interconnection of electrical mains supplied equipment in road vehicles | |
| Multi-element metallic cables used in analogue and digital communication and control - Part 12-2: Sectional specification for screened cables characterised from 1 MHz up to 2000 MHz - Work Area... | |
| Multi-element metallic cables used in analogue and digital communication and control - Part 13-1: Sectional specification for outer screened cables characterised up to 2000 MHz - Horizontal and building backbone... | |
| Multi-element metallic cables used in analogue and digital communication and control - Part 13-2: Sectional specification for outer screened cables characterised from 1 MHz up to 2000 MHz - Work... | |
| Multi-element metallic cables used in analogue and digital communication and control - Part 7: Sectional specification for instrumentation and control cables | |
| Multi-element metallic cables used in analogue and digital communication and control -- Part 10-1: Sectional specification for cables characterized up to 500 MHz - Horizontal and building backbone cables | |
| Multi-pair cables used in high bit rate digital access telecommunication networks -- Part 1: Outdoor cables | |
| Multi-pair cables used in high bit rate digital access telecommunications networks - Part 3: Indoor multi-pair/quad riser cables up to 100 MHz for maximum length of connection 100 m supporting... | |
| Network oriented application harmonization - Electronic device description language | |
| NON-DOMESTIC GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS. PART 1: SAFETY | |
| OPTICAL FIBRE AMPLIFIER RELIABILITY STANDARD | |
| OUTDOOR BUSHINGS FOR 24 KV AND 36 KV AND FOR 5 KA AND 8 KA, FOR LIQUID FILLED TRANSFORMERS. | |
| Overhead electrical lines exceeding AC 1 kV up to and including AC 45 kV - Part 3: Set of National Normative Aspects | |
| PACKAGING MACHINES SAFETY. PART 3: FORM, FILL AND SEAL MACHINES. SPECIFIC REQUIREMENTS | |
| Passive components to be used in optical fibre communication systems - Product specifications - Part 3-1: Type: 100/200 GHz DWDM module terminated on IEC 60793-2-50 category B1.1 and B1.3 single... | |
| Passive components to be used in optical fibre communication systems - Product specifications - Part 3-2: Type 4 / 8 channel CWDM module terminated on IEC 60793-2-50 category B1.1 and... | |
| PEDESTAL W.C. PAN WITH CLOSE COUPLED CISTERN. CONNECTING DIMENSIONS. | |
| PEDESTAL W.C. PAN WITH INDEPENDENT WATER SUPPLY. CONNECTING DIMENSIONS. | |
| PEDESTAL WASH BASINS. CONNECTING DIMENSIONS. | |
| Personal fall protection equipment - Descender devices for rescue | |
| Personal fall protection equipment - Retractable type fall arresters | |
| PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FORM A HEIGHT. DESCENDER DEVICES | |
| Personal protective equipment against falls from a height - Part 1: Guided type fall arresters including a rigid anchor line | |
| PHOTOELECTRIC CONTROL UNITS FOR ROAD AND STREET LIGHTING | |
| PHOTOVOLTAIC LIGHTING SYSTEMS -- PART 1. SAFETY - TEST REQUIREMENTS AND PROCEDURES | |
| PHOTOVOLTAIC LIGHTING SYSTEMS -- PART 2: EMC - TEST REQUIREMENTS AND PROCEDURES | |
| PHOTOVOLTAIC LIGHTING SYSTEMS -- PART 3: PERFORMANCE - TEST REQUIREMENTS AND PROCEDURES | |
| PHOTOVOLTAIC SEMICONDUCTOR CONVERTERS -- PART 1: UTILITY INTERACTIVE FAIL SAFE PROTECTIVE INTERFACE FOR PV-LINE COMMUTATED CONVERTERS - DESIGN QUALIFICATION AND TYPE APPROVAL | |
| PHOTOVOLTAIC SYSTEMS - CHARGE REGULATORS -- PART 1: SAFETY - TEST REQUIREMENTS AND PROCEDURES | |
| PHOTOVOLTAIC SYSTEMS - CHARGE REGULATORS -- PART 2: EMC - TEST REQUIREMENTS AND PROCEDURES | |
| PHOTOVOLTAIC SYSTEMS - CHARGE REGULATORS -- PART 3: PERFORMANCE - TEST REQUIREMENTS AND PROCEDURES | |
| PHOTOVOLTAIC SYSTEMS - SOLAR HOME SYSTEMS -- PART 1: SAFETY - TEST REQUIREMENTS AND PROCEDURES | |
| PHOTOVOLTAIC SYSTEMS - SOLAR HOME SYSTEMS -- PART 2: PERFORMANCE - TEST REQUIREMENTS AND PROCEDURES | |
| PHOTOVOLTAIC SYSTEMS - SOLAR MODULES -- PART 1: SAFETY - TEST REQUIREMENTS AND PROCEDURES | |
| PHOTOVOLTAIC SYSTEMS - SOLAR MODULES -- PART 2: PERFORMANCE - TEST REQUIREMENTS AND PROCEDURES | |
| PHOTOVOLTAIC SYSTEMS -- PART 1: ELECTROMAGNETIC COMPATIBILITY (EMC) - REQUIREMENTS FOR PHOTOVOLTAIC PUMPING SYSTEMS | |
| PHOTOVOLTAIC SYSTEMS IN BUILDINGS -- PART 1: SAFETY REQUIREMENTS | |
| PIEZOELECTRIC PROPERTIES OF CERAMIC MATERIALS AND COMPONENTS -- PART 1: DEFINITIONS AND CLASSIFICATION | |
| PIEZOELECTRIC PROPERTIES OF CERAMIC MATERIALS AND COMPONENTS -- PART 2: METHODS OF MEASUREMENT AND PROPERTIES - LOW POWER | |
| Piezoelectric properties of ceramic materials and components -- Part 3: Properties and methods of measurement - High power | |
| PLUGS AND SOCKET-OUTLETS 16 A 250 V A.C. FOR HOUSEHOLD AND SIMILAR PURPOSES. CONVERSION ADAPTERS. | |
| PLUGS AND SOCKET-OUTLETS 16 A 250 V A.C. FOR HOUSEHOLD AND SIMILAR PURPOSES. GENERAL REQUIREMENTS AND DIMENSIONS. VARIANT 1 (3P + 2P). | |
| PLUGS AND SOCKET-OUTLETS 16 A 250 V A.C. FOR HOUSEHOLD AND SIMILAR PURPOSES. GENERAL REQUIREMENTS AND DIMENSIONS. VARIANT 2 (3P). | |
| PLYWOOD. CLASSIFICATION AND TERMINOLOGY. PART 1: CLASSIFICATION. | |
| PLYWOOD. CLASSIFICATION AND TERMINOLOGY. PART 2: TERMINOLOGY. | |
| Portable fire extinguishers - Part 11: Performance, requirements, test method and marking for EN 3-7 extinguishers suitable to be used on lithium-ion battery fires | |
| Portable fire extinguishers - Part 7: Characteristics, performance requirements and test methods | |
| Portable fire extinguishers - Part 8: Requirements for the construction, pressure resistance and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar, which... | |
| Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz - Part 4: Low rate wide band services (LRWBS) operating between... | |
| POWER TRANSFORMER AND REACTOR FITTINGS. PART 10. COOLING EQUIPMENT. SECTION 1: REMOVABLE RADIATORS FOR OIL IMMERSED TRANSFORMERS. | |
| POWER TRANSFORMER AND REACTOR FITTINGS. PART 10: COOLING EQUIPMENT. SECTION 4: ELECTRIC PUMPSETS FOR TRANSFORMER OIL. | |
| POWER TRANSFORMER AND REACTOR FITTINGS. PART 10: COOLING EQUIPMENT. SECTION 5: OIL FLOW INDICATORS FOR POWER TRANSFORMERS. | |
| POWER TRANSFORMER AND REACTOR FITTINGS. PART 11: CHOICE AND DISTANCE BETWEEN CENTRES OF WHEELS FOR OIL IMMERSED AND DRY TYPE DISTRIBUTION TRANSFORMERS. | |
| POWER TRANSFORMER AND REACTOR FITTINGS. PART 1: GENERAL. | |
| POWER TRANSFORMER AND REACTOR FITTINGS. PART 2: GAS AND OIL ACTUATED RELAY FOR LIQUID IMMERSED TRANSFORMERS AND REACTORS WITH CONSERVATOR. | |
| POWER TRANSFORMER AND REACTOR FITTINGS. PART 3: PROTECTIVE RELAY FOR HERMETICALLY SEALED LIQUID-IMMERSED TRANSFORMERS AND REACTORS WITHOUT GASEOUS CUSHION. | |
| POWER TRANSFORMER AND REACTOR FITTINGS. PART 4: THERMAL CONTROL DEVICES. SECTION 1: THERMOMETER POCKETS FOR CERTAIN TYPES OF OIL IMMERSED TRANSFORMERS. | |
| POWER TRANSFORMER AND REACTOR FITTINGS. PART 5: LIQUID LEVEL INDICATORS. | |
| POWER TRANSFORMER AND REACTOR FITTINGS. PART 6: OIL PRESSURE GAUGES. DIFFERENTIAL PRESSURE GAUGES. | |
| POWER TRANSFORMER AND REACTOR FITTINGS. PART 7: EARTHING TERMINALS FOR CERTAIN TYPES OF OIL IMMERSED AND DRY-TYPE TRASNFORMERS. | |
| POWER TRANSFORMER AND REACTOR FITTINGS. PART 8: OIL DRAIN DEVICES. SECTION 1: DRAINING PLUG WITH SAMPLING FOR OIL IMMERSED DISTRIBUTION TRANSFORMERS. | |
| POWER TRANSFORMER AND REACTOR FITTINGS. PART 8: OIL DRAIN DEVICES. SECTION 2: FILLING OPENINGS FOR OIL IMMERSED DISTRIBUTION TRANSFORMERS WITHOUT CONSERVATOR. | |
| PROTECTION OF TELECOMMUNICATION LINES AGAINST LIGHTNING. FIBRE OPTICS INSTALLATIONS. | |
| PROTECTION OF TELECOMMUNICATIONS LINES AGAINST LIGHTNING. FIBRE OPTICS INSTALLATIONS | |
| Protection profiles for signature creation and verification application - Part 1: Introduction | |
| Protection profiles for signature creation and verification application - Signature creation application - Part 2: Core PP | |
| Protection profiles for signature creation and verification application - Signature creation application - Part 3: Possible extensions | |
| Protection profiles for signature creation and verification application - Signature verification application - Part 4: Core PP | |
| Protection profiles for signature creation and verification application - Signature verification application - Part 5: Possible extensions | |
| PROTECTIVE CLOTHING - PART 2: APRONS, TROUSERS AND VESTS PROTECTING AGAINST CUTS AND STABS BY HAND KNIVES | |
| PROTECTIVE CLOTHING. PROTECTION AGAINST LIQUID CHEMICALS. PART 2: PERFORMANCE REQUIREMENTS FOR CHEMICAL PROTECTIVE SUIT WITH LIQUID TIGHT CONNECTINS BETWEEN DIFFERENT PARTS OF THE CHEMICAL PROTECTIVE SUIT FOR EMERGENCY TEAMS (TYPE... | |
| Protective gloves against chemicals and micro-organisms - Part 1: Terminology and performance requirements | |
| PROXIMITY DEVICES - REQUIREMENTS FOR PROXIMITY DEVICES WITH ANALOGUE OUTPUT | |
| QUALITY SYSTEMS. MEDICAL DEVICES. PARTICULAR REQUIREMENTS FOR THE APPLICATION OF EN ISO 9003 | |
| Radiators and convectors - Part 1: Technical specifications and requirements | |
| Radiators and convectors - Part 2: Test methods and rating | |
| Radiators and convectors - Part 3: Evaluation of conformity | |
| RADIATORS AND CONVECTORS. PART 3: EVALUATION OF CONFORMITY. | |
| RADIATORS/CONVECTORS . PART 1 - TECHNICAL SPECIFICATIONS AND REQUIREMENTS | |
| Railway Application - Communication, signalling and processing system - Safety related electronic systems for signalling | |
| Railway applications - Communication, signalling and processing systems - European rail traffic management system - Definition of track-side objects in addition to cab-signalling | |
| Railway Applications - Communication, signalling and processing systems - Safety-related communication in transmission systems | |
| Railway applications - Electromagnetic compatibility - Part 1: General | |
| Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world | |
| Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle | |
| Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus | |
| Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus | |
| Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus | |
| Railway applications - Environmental conditions for equipment | |
| Railway Applications - Fixed installations and rolling stock - Technical criteria for the coordination between power supply and rolling stock to achieve interoperability - Part 2: stability and harmonics | |
| Railway Applications - Fixed installations and rolling stock - Technical criteria for the coordination between traction power supply and rolling stock to achieve interoperability - Part 1: general | |
| Railway applications - Power supply and rolling stock - Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability | |
| Railway applications - Railway rolling stock cables having special fire performance - Standard wall -- Part 1: General requirements | |
| Railway applications - Railway rolling stock cables having special fire performance - Standard wall -- Part 2: Single core cables | |
| Railway applications - Railway rolling stock cables having special fire performance - Standard wall -- Part 3: Multicore cables | |
| Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 1: General requirements | |
| Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 2: Single core cables | |
| Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 3: Single core and multicore cables (pairs, triples and quads) screened and thin wall... | |
| Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 4: Multicore and multipair cables standard wall sheathed | |
| Railway applications - Railway rolling stock cables having special fire performance - Thin wall and standard wall - Guide to use | |
| Railway applications - Rolling stock - Electronic equipment | |
| Railway applications - Rolling stock - Pantographs: Characteristics and tests - Part 2: Pantographs for metros and light rail vehicles | |
| RAILWAY APPLICATIONS. ENVIRONMENTAL CONDITIONS FOR EQUIPMENT. PART 11: EQUIPMENT ON BOARD ROLLING STOCK | |
| RAILWAYS APPLICATIONS. GUIDE TO THE SPECIFICATION OF A GUIDED TRANSPORT SYSTEM. PART 1: GENERAL. | |
| REFRIGERATED DISPLAY CABINETS. PART 12: MEASUREMENT OF THE HEAT EXTRACTION RATE OF THE CABINETS WHEN THE CONDENSING UNIT IS REMOTE FROM THE CABINET | |
| REFRIGERATED DISPLAY CABINETS. PART 13: AIR TEMPERATURE MEASUREMENT | |
| Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria | |
| Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation | |
| Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection | |
| Refrigerating systems and heat pumps - Safety and environmental requirements - Part 5: Safety classification and information about refrigerants | |
| Required insulation level - Definition and application to live working | |
| ROAD TRAFFIC SIGNAL SYSTEMS | |
| Routine tests for controls within the scope of the EN 60730 series | |
| SAFETY OF HAND-HELD BATTERY-POWERED MOTOR-OPERATED TOOLS AND BATTERY PACKS. PART 2-8: PARTICULAR REQUIREMENTS FOR SHEET METAL SHEARS AND NIBBLERS. | |
| Safety of household and similar electrical appliances - Particular requirements for battery-powered hand-held scissor type grass shears | |
| SAFETY OF MACHINERY. PRE-FORMED RIGID CONTAINER PACKAGING MACHINERY. SAFETY REQUIREMENTS. | |
| Safety of packaging machines - Part 4: Palletizers and depalletizers and associated equipment | |
| Safety of packaging machines - Part 7: Cartoning and case packing machines | |
| Safety requirements of beauty care electrical equipment | |
| Signalling on low voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 4-2: Low voltage decoupling filters - Safety requirements | |
| Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 4-7: Portable low voltage decoupling filters - Safety requirements | |
| Signalling on low-voltage electrical installations in the frequency range 3 kHz to 526,5 kHz - Part 1: General requirements, frequency bands and electromagnetic disturbances | |
| SMALL TRANSMITTING/RECEIVI NG ANTENNA SYSTEMS. SAFETY REQUIREMENTS | |
| SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS. PART 12: WELDING PROCEDURE TESTS FOR THE ARC WELDING OF CAST STEELS (ISO/DIS 9656-12:1995) | |
| SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS. PART 13: WELDING PROCEDURE TESTS FOR THE ARC WELDING OF ALUMINIUM AND COMBINATIONS OF CAST TO WROUGHT MATERIAL (ISO/DIS 9656-13:1995) | |
| Specification for dedicated liquefied petroleum gas appliances - Independent stoves, including those incorporating a grill for outdoor use | |
| SPECIFICATION FOR OPEN PATH APPARATUS FOR THE DETECTION OF GASES AND VAPOURS. PART 1: GENERAL REQUIREMENTS AND TEST METHODS. | |
| SPECIFICATION FOR OPEN PATH APPARATUS FOR THE DETECTION OF GASES AND VAPOURS. PART 2: PERFORMANCE REQUIREMENTS FOR APPARATUS FOR THE DETECTION OF COMBUSTIBLE GASES. | |
| SPECIFICATION OF THE RADIO DATA SYSTEM (RDS) FOR VHF/FM SOUND BROADCASTING IN THE FREQUENCY RANGE FROM 87,5 TO 108,0 MHZ. | |
| STANDARD SHEET: ADDITIONAL ROUTINE TESTS FOR PORTABLE ELECTRIC HEATING TOOLS AND SIMILAR APPLIANCES WITHIN THE SCOPE OF EN 60335-2-45 | |
| STANDRAD SHEET: ADDITIONAL ROUTINE TESTS FOR BATTERY CHARGERS WITHIN THE SCOPE OF EN 60335-2-29 | |
| STANDRAD SHEET: ADDITIONAL ROUTINE TESTS FOR ELECTRICALLY HEATED BLANKETS, PADS AND SIMILAR FLEXIBLE HEATING APPLIANCES WITHIN THE SCOPE OF EN 60967 | |
| STANDRAD SHEET: ADDITIONAL ROUTINE TESTS FOR INSTANTANEOUS WATER HEATERS WITHIN THE SCOPE OF EN 60335-2-35 | |
| STANDRAD SHEET: ADDITIONAL ROUTINE TESTS FOR STORAGE WATER HEATERS WITHIN THE SCOPE OF EN 60335-2-21 | |
| Technical characteristics and methods of measurement for equipment for generation, transmission and reception of Digital Selective Calling (DSC) in the maritime MF, MF/HF and/or VHF mobile service; Part 1: Common... | |
| Technical characteristics and methods of measurement for equipment for generation, transmission and reception of Digital Selective Calling (DSC) in the maritime MF, MF/HF and/or VHF mobile service; Part 2: Class... | |
| Technical characteristics and methods of measurement for equipment for generation, transmission and reception of Digital Selective Calling (DSC) in the maritime MF, MF/HF and/or VHF mobile service; Part 3: Class... | |
| Technical characteristics and methods of measurement for equipment for generation, transmission and reception of Digital Selective Calling (DSC) in the maritime MF, MF/HF and/or VHF mobile service; Part 4: Class... | |
| Technical characteristics and methods of measurement for equipment for generation, transmission and reception of Digital Selective Calling (DSC) in the maritime MF, MF/HF and/or VHF mobile service; Part 5: Handheld... | |
| Technical characteristics and methods of measurement for equipment for generation, transmission and reception of Digital Selective Calling (DSC) in the maritime MF, MF/HF and/or VHF mobile service; Part 6: Class... | |
| Technical characteristics and methods of measurement for equipment for generation, transmission and reception of Digital Selective Calling (DSC) in the maritime MF, MF/HF and/or VHF mobile service; Part 7: Implementation... | |
| Technical characteristics and methods of measurement for equipment for generation, transmission and reception of Digital Selective Calling (DSC) in the maritime MF, MF/HF and/or VHF mobile service; Part 8: Enabling... | |
| Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 12: Supplementary services stage 3; Sub-part 16: Pre-emptive Priority Call (PPC) | |
| Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 12: Supplementary services stage 3; Sub-part 22: Dynamic Group Number Assignment (DGNA) | |
| Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 3: Interworking at the Inter-System Interface (ISI); Sub-part 12: Transport layer independent Additional Network Feature Individual Call (ANF-ISIIC) | |
| Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 3: Interworking at the Inter-System Interface (ISI); Sub-part 15: Transport layer independent Additional Network Feature, Mobility Management (ANF-ISIMM) | |
| Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 3: Interworking at the Inter-System Interface (ISI); Sub-part 9: Transport layer independent, General design | |
| Test of insulation of bars and coils of high-voltage machines | |
| VHF radiotelephone equipment for general communications and associated equipment for Class "D" Digital Selective Calling (DSC); Harmonised Standard for access to radio spectrum and for features for emergency services | |
| Vitrified clay pipe systems for drains and sewers - Part 3: Test methods | |
| Vitrified clay pipe systems for drains and sewers - Part 8: Requirements for the use of vitrified clay components in the rehabilitation of drainage systems and conditions for the application... | |
| VITRIFIED CLAY PIPES AND FITTINGS AND PIPE JOINTS FOR DRAINS AND SEWERS. PART 1: REQUIREMENTS. | |
| WALL HUNG BIDET WITH OVER-RIM SUPPLY ONLY. CONNECTING DIMENSIONS. | |
| WALL HUNG WASH BASINS. CONNECTING DIMENSIONS. | |
| WOOD FIBREBOARDS. DEFINITIONS, CLASSIFICATION AND SYMBOLS. | |
| Wood preservatives - Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) - Part 1: Application by surface treatment (laboratory method) | |
| Wood preservatives - Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) - Part 2: Ovicidal effect (laboratory method) | |
| Wood preservatives - Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival - Part 1: Application by surface treatment (Laboratory method) | |
| Wood preservatives - Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival - Part 2: Application by impregnation (Laboratory method) | |
| Wood preservatives - Determination of the toxic values against larvae of Hylotrupes bajulus (Linnaeus) - (Laboratory method) | |
| Wood-based panels. Sampling, cutting and inspection. Part 2: Quality control in the factory. | |
| Wood-based panels. Sampling, cutting and inspection. Part 3: Inspection of a consignment of panels. | |
| Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods | |
| Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 2: Performance requirements for apparatus used for exposure measurement... | |
| Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 3: Performance requirements for apparatus used for general gas... | |
| Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4: Guide for selection, installation, use and maintenance | |
| Workplace exposure - Size fraction definitions for measurement of airborne particles (ISO 7708:1995, modified) |
| << Prev | Next >> |