AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| çLASTICS PIPING SYSTEMS. POLYETHYLENE (PE) TAPPING TEES. TEST METHOD FOR IMPACT RESISTANCE OF AN ASSEMBLED TAPPING TEE. | |
| Accessibility and usability of the built environment - Requirements and recommendations | |
| ADHESIVES. DETERMINATION OF DESPERSABILITY | |
| ADHESIVES. TACK MEASUREMENT FOR PRESSURE SENSITIVE ADHESIVES. DETERMINATION OF LOOP TACK | |
| ADHESIVES. TACK MEASUREMENT FOR PRESSURE SENSITIVE ADHESIVES. DETERMINATION OF ROLLING BALL TACK. | |
| Adjustable telescopic aluminium props - Product specifications, design and assessment by calculation and tests | |
| Agricultural and forestry machinery - Mobile yarders for timber logging - Safety | |
| Air Traffic Management - Information security for organisations supporting civil aviation operations | |
| Air Traffic Management - Software assurance levels | |
| Alcohol powered flueless fireplaces - Safety requirements and test methods - Part 2: Automatically operated decorative fireplaces for domestic use | |
| Aluminium and aluminium alloys - Hot-rolled armour plates in weldable aluminium alloy - Technical delivery conditions | |
| ALUMINIUM AND ALUMINIUM ALLOYS. ALLOYED INGOTS FOR REMELTING. SPECIFICATIONS. | |
| ALUMINIUM AND ALUMINIUM ALLOYS. DRAWING STOCK. PART 1: GENERAL REQUIREMENTS AND TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY. | |
| ALUMINIUM AND ALUMINIUM ALLOYS. DRAWING STOCK. PART 2: SPECIFIC REQUIREMENTS FOR ELECTRICAL APPLICATIONS. | |
| ALUMINIUM AND ALUMINIUM ALLOYS. DRAWING STOCK. PART 3: SPECIFIC REQUIREMENTS FOR MECHANICAL USES (EXCLUDING WELDING) | |
| ALUMINIUM AND ALUMINIUM ALLOYS. DRAWING STOCK. PART 4: SPECIFIC REQUIREMENTS FOR WELDING APPLICATIONS | |
| ALUMINIUM AND ALUMINIUM ALLOYS. TEST METHODS. EARING TEST FOR SHEET AND STRIP. | |
| Antimicrobial wound dressings - Requirements and test methods | |
| Automotive fuels - Automotive B10 diesel fuel - Requirements and test methods | |
| Bar code - Multi industry transport label | |
| BAR CODING - DATA IDENTIFIERS | |
| BAR CODING - LICENSE PLATE | |
| BAR CODING - MULTI INDUSTRY TRANSPORT LABEL | |
| BAR CODING - TERMINOLOGY | |
| BAR CODING - TEST SPECIFICATIONS FOR BAR CODE SYMBOLS | |
| Beauty Salon Services - Requirements and recommendations for the provision of service | |
| Bio-based products - Bio-based carbon content - Determination of the bio-based carbon content using the radiocarbon method | |
| BLANK DETAIL SPECIFICATION: SURFACE ACOUSTIC WAVE (SAW) FILTERS. CAPABILITY APPROVAL | |
| Bonded Glazing for doors, windows and curtain walling - Verification of mechanical performance of bonding on aluminium and steel surfaces | |
| Bonded glazing for doors, windows and curtain walling - Verification of mechanical performance of bonding | |
| Building Hardware - Locks and latches - Multipoint locks and their locking plates - Requirements and test methods | |
| Building hardware - Mechatronic cylinders - Requirements and test methods | |
| Building hardware - Mechatronic door furniture - Requirements and test methods | |
| Building hardware - Requirements and test methods - Multipoint locks, latches and locking plates | |
| Building hardware - Uncontrolled Door Closing Devices for single action doors - Requirements and test methods | |
| BUILDING HARDWARE. CORROSION RESISTANCE OF HARDWARE FOR DOORS, WINDOWS, SHUTTERS AND CURTAIN WALLING. REQUIREMENTS AND TEST METHODS. | |
| Candles - Product safety labels | |
| Candles - Specification for fire safety | |
| Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools | |
| Characterisation of waste - Compliance leaching test - One stage batch leaching test for monoliths at fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions... | |
| Characterisation of waste - Leaching behaviour test for basic characterisation - Dynamic monolithic leaching test with continuous leachant renewal under conditions relevant for specified scenario(s) | |
| Characterisation of waste - Leaching behaviour test for basic characterisation - Dynamic monolithic leaching test with periodic leachant renewal, under fixed test conditions | |
| Characterization of sludges - Physical consistency - Part 2: Determination of solidity - Method by pocket vane shear apparatus | |
| Characterization of waste - Determination of gross calorific value and calculation of net calorific value. | |
| Characterization of waste - Leaching behaviour test - Determination of the reducing character and the reducing capacity | |
| Chemical disinfectants and antiseptics - Quantitative non-porous surface test without mechanical action for the evaluation of virucidal activity of chemical disinfectants used in the medical area - Test method and... | |
| Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements (phase... | |
| CHEMICAL DISINFECTANTS AND ANTISEPTICS. QUANTITATIVE SUSPENSION TEST FOR THE EVALUATION OF FUNGICIDAL ACTIVITY OF CHEMICAL DISINFECTANS AND ANTISEPTICS USED IN FOOD, INDUSTRIAL, DOMESTIC AND INSTITUTIONAL AREAS | |
| Chemicals used for treatment of water intended for human consumption - Sodium permanganate | |
| Classes of fire-retardant treated wood products in interior and exterior end use applications - Retained performance of fire-retardant treated wood products | |
| Clay blocks for floor plates | |
| CLEANROOM TECHNOLOGY. BIOCONTAMINATION CONTROL. PART 2: METHODS OF ANALYZING AND MEASURING BIOCONTAMINATION OF TEXTILES IN ZONES AT RISK. | |
| CLEANROOM TECHNOLOGY. BIOCONTAMINATION CONTROL. PART 3: METHOD OF ANALYZING AND MEASURING BIOCONTAMINATION OF SURFACESIN ZONES AT RISK. | |
| CLEANROOM TECHNOLOGY. BIOCONTAMINATION CONTROL. PART 4: METHODS OF ANALYZING AND MEASURING AEROBIOCONTAMINATION IN ZONES AT RISK. | |
| CLEANROOM TECHNOLOGY. PARTICULATE CONTAMINATION. PART 1: CLASSIFICATION OF CLEANROOMS AND CLEAN AIR CONTROLLED SPACES BY AIRBORN PARTICULARTE CONTENT. | |
| Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products | |
| Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles | |
| Compost and digestate - Determination of the content of macroscopic impurities and stones | |
| CONICAL FITTINGS WITH A 6% (LUER) TAPER FOR SYRINGES, NEEDLES AND CERTAIN OTHER MEDICAL EQUIPMENT. LOCK FITTINGS. | |
| Conservation of Cultural Heritage - Guidelines and procedures for choosing appropriate lighting for indoor exhibitions | |
| Conservation of cultural heritage - Guidelines for management of environmental conditions - Recommendations for showcases used for exhibition and preservation of cultural heritage | |
| CONSTRUCTION OF PIPELINES FOR DRAINS AND SEWERS | |
| Construction products: Assessment of release of dangerous substances - Determination of activity of radium-226, thorium-232 and potassium-40 in construction products using semiconductor gamma-ray spectrometry | |
| COOPER AND COOPER ALLOYS. DECLARATIONS OF CONFORMITY | |
| COOPER AND COOPER ALLOYS. PLATE, SHEET AND CIRCLES FOR BOILERS, PRESSURE VESSELS AND HOT WATER STORAGE UNITS | |
| COOPER AND COOPER ALLOYS. PLATE, SHEET, STRIP AND CIRCLES FOR GENERAL PURPOSES | |
| COOPER AND COOPER ALLOYS. STRIP FOR SPRINGS AND CONNECTORS | |
| Copper and copper alloys - Determination of cadmium content - Flame atomic absorption spectrometric method (FAAS) | |
| Copper and copper alloys - Determination of manganese content - Part 1: Spectrophotometric method | |
| Copper and copper alloys - Determination of phosphorus content - Spectrophotometric method | |
| Cranes - Light crane systems | |
| Cycles - Requirements and test methods for cycle locks | |
| DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - MOBILE AND PORTABLA NON-DOMESTIC FORCED DRAUGHT DIRECT FIRED AIR HEATERS | |
| Design for All approach - Managing accessibility of products and services | |
| Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours | |
| Determination of slip resistance of pedestrian surfaces - Method of evaluation - Part 1: Reference method | |
| District heating and district cooling pipe systems - Terms and definitions | |
| DOMESTIC FURNITURE - BEDS AND MATTRESSES - SAFETY REQUIREMENTS AND TEST METHODS | |
| EDI. MESSAGE. DELIVERY JUST IN TIME MESSAGE (DELJIT) | |
| EDI. MESSAGE. DELIVERY SCHEDULE MESSAGE (DELFOR) | |
| EDI. MESSAGE. DESPATCH ADVICE MESSAGE (DESADV) | |
| EDI. MESSAGE. FORWARDING AND TRANSPORT RATE INFORMATION MESSAGE (IFTRIN) | |
| EDI. MESSAGE. FORWARDING AND TRANSPORT SCHEDULE AND AVAILABILITY INFORMATION MESSAGE (IFTSAI) | |
| EDI. MESSAGE. FORWARDING AND TRANSPORT SHIPMENT CHARGE CALCULATION MESSAGE (IFTCCA) | |
| EDI. MESSAGE. INTERNATIONAL MULTIMODAL STATUS REPORT MESSAGE (IFTSTA) | |
| EDI. MESSAGE. INVENTORY REPORT MESSAGE (INVRPT) | |
| EDI. MESSAGE. INVOICE MESSAGE (INVOIC) | |
| EDI. MESSAGE. PARTY INFORMATION MESSAGE (PARTIN) | |
| EDI. MESSAGE. PASSENGER LIST MESSGE (PAXLST) | |
| EDI. MESSAGE. PRICE/SALES CATALOGUE MESSAGE (PRICAT) | |
| EDI. MESSAGE. PURCHASE ORDER CHANGE REQUEST MESSAGE (ORDCHG) | |
| EDI. MESSAGE. PURCHASE ORDER MESSAGE (ORDERS) | |
| EDI. MESSAGE. PURCHASE ORDER RESPONSE MESSAGE (ORDRSP) | |
| EDI. MESSAGE. QUALITY DATA MESSAGE (QALITY) | |
| EDI. MESSAGE. QUOTE MESSAGE (QUOTES) | |
| EDI. MESSAGE. REQUSET FOR QUOTE MESSAGE (REQOTE) | |
| EDI. MESSAGE. SALES DATA REPORT MESSAGE (SLSRPT) | |
| EDI. MESSAGE. SANITARY/PHYTOSANITA RY CERTIFICATE (SANCRT) | |
| EDI. MESSAGE. STATEMENT OF ACCOUNT MESSAGE (STATAC) | |
| EDI. MESSAGE. SUPERANNUATION CONTRIBUTION ADVICE MESSAGE (SUPCOT) | |
| EDI. MESSAGE. SUPERANNUATION MAINTENANCE MESSAGE (SUPMAN) | |
| Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN 15509 - Part 1: Test suite structure and test purposes | |
| Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN 15509 - Part 2: Abstract test suite | |
| Electronic fee collection - Interoperability application profile for DSRC | |
| Electronic Public Procurement - Catalogue - Part 2: Transactions | |
| Electronic Public Procurement - Fulfilment - Part 2: Transactions | |
| Electronic Public Procurement - Ordering - Part 2: Transactions | |
| Electronic public procurement - Pre-award - Part 1: Choreographies | |
| Electronic public procurement - Pre-award - Part 2: Transactions | |
| Energy performance of buildings - Module M4-3 - Calculation of the design cooling load | |
| Entertainment technology - Part 1: Machinery for stages and other production areas - Safety requirements and inspections | |
| Entertainment technology - Part 3: Unmanned aircraft systems (UAS/Drones) for stages and other production areas - Safety requirements and inspections | |
| Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 1: General requirements including calculation method | |
| Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 3: Kitchen ventilation ceilings - Design and safety requirements | |
| Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 4: Air inlets and outlets - Design and safety requirements | |
| Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 5: Air duct - Design and dimensioning | |
| Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 7: Installation and use of fixed fire extinguishing systems | |
| Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 7: Installation and use of fixed fire suppression systems | |
| Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 8: Installations for treatment of cooking fumes - Requirements and testing | |
| Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 9: Capture and containment performance of extraction systems - Test methods | |
| Equipment for commercial kitchens - Components for ventilation of commercial kitchens - Part 1: General requirements including calculation method | |
| Equipment for commercial kitchens - Components for ventilation of commercial kitchens - Part 2: Kitchen ventilation hoods - Design and safety requirements | |
| Equipment for commercial kitchens - Components for ventilation of commercial kitchens - Part 6: Aerosol separators - Design and safety requirements | |
| Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and other impurities - Gas chromatographic method | |
| Explosion diverters | |
| Explosion isolation flap valves | |
| Extended application of results from fire resistance tests for service installations - Part 2: Dampers | |
| Extended application of test results on durability of self-closing for fire resistance and/or smoke control doorsets and openable windows – Part 3: Durability of self-closing of steel sliding doorsets | |
| Extended application of test results on durability of self-closing for fire resistance and/or smoke control doorsets and openable windows - Part 1: Durability of self-closing of hinged and pivoted steel... | |
| Extended application of test results on durability of self-closing for fire resistance and/or smoke control doorsets and openable windows - Part 2: Durability of self-closing of steel rolling shutters | |
| Extended application of test results on durability of self-closing for fire resistance and/or smoke control doorsets and openable windows - Part 4: Durability of self-closing of fire resistance hinged and... | |
| Fans - Procedures and methods to determine the energy efficiency for the electrical input power range of 125 W up to 500 kW | |
| Fans - Safety requirements | |
| Fertilizers - Determination of the water-soluble potassium content | |
| FILM AND HYBRID INTEGRATED CIRCUITS. PART 5: PROCEDURE FOR QUALIFICATION APPROVAL | |
| Finger jointed structural timber - Performance requirements and minimum production requirements | |
| Fire extinguishing media - Foam concentrates - Part 1: Specification for medium expansion foam concentrates for surface application to water-immiscible liquids | |
| Fire extinguishing media - Foam concentrates - Part 2: Specification for high expansion foam concentrates for surface application to water-immiscible liquids | |
| Fire extinguishing media - Foam concentrates - Part 3: Specification for low expansion foam concentrates for surface application to water-immiscible liquids | |
| Fire extinguishing media - Foam concentrates - Part 4: Specification for low expansion foam concentrates for surface application to water-miscible liquids | |
| FIRE RESISTANCE TESTS FOR DOOR AND SHUTTER ASSEMBLIES - PART 2: FIRE DOOR HARDWARE - BUILDING HARDWARE FOR FIRE RESISTING DOORSETS AND OPENABLE WINDOWS | |
| Fixed firefighting systems - Automatic residential sprinkler systems - Design, installation and maintenance | |
| Flameless explosion venting devices | |
| Flexible sheets for waterproofing - Plastic and rubber sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete - Definitions and characteristics | |
| Food processing machinery - Cream whippers - Safety and hygiene requirements | |
| Food processing machinery - Fish heading and filleting machines - Safety and hygiene requirements | |
| Food processing machinery - Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) - Safety and hygiene requirements | |
| Food processing machinery - Pasteurizers, vats and cream cookerss - Safety and hygiene requirements | |
| Food processing machinery - Soft ice cream machines - Safety and hygiene requirements | |
| FOOD PROCESSING MACHINERY. SAFETY AND HYGIENE REQUIREMENTS. BASIC CONCEPTS. PART 2: HYGIENE REQUIREMENTS | |
| FOOD PROCESSING MACHINERY. VEGETABLE CUTTING MACHINES. SAFETY AND HYGIENE REQUIREMENTS | |
| Foodstuffs - Detection of food allergens by molecular biological methods - Part 6: Wheat (Triticum L.) and Rye (Secale cereale) - Qualitative detection of a specific DNA sequence in cooked... | |
| Foodstuffs - Detection of food allergens by molecular biological methods - Part 7: Peanut (Arachis hypogaea) - Qualitative detection of a specific DNA sequence in food by real-time PCR | |
| Foodstuffs - Detection of food allergens by molecular biological methods - Part 8: Peanut (Arachis hypogaea), hazelnut (Corylus spp.), walnut (Juglans regia) and cashew (Anacardium occidentale) - Qualitative detection of... | |
| Foodstuffs - Detection of food allergens by molecular biological methods - Part 9: Fish - Qualitative detection of a specific DNA sequence in food by real-time PCR | |
| Foodstuffs - Determination of acrylamide in coffee and coffee products by HPLC-MS/MS and GC-MS | |
| Founding - Ausferritic spheroidal graphite cast irons | |
| Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings | |
| FOUNDING. TECHNICAL CONDITIONS OF DELIVERY. PART 4: ADDITIONAL REQUIREMENTS FOR ALUMINIUM ALLOY CASTINGS. | |
| FOUNDING. TECHNICAL CONDITIONS OF DELIVERY. PART 5: ADDITIONAL REQUIREMENTS FOR MAGNESIUM ALLOY CASTINGS. | |
| FOUNDING. TECHNICAL CONDITIONS OF DELIVERY. PART 6: ADDITIONAL REQUIREMENTS FOR ZINC ALLOY CASTINGS | |
| Gas-fired central heating boilers - Part 1: General requirements and tests | |
| Gas-fired endothermic engine driven heat pumps - Part 2: Safety | |
| Gas-fired endothermic engine driven heat pumps - Part 4: Test methods | |
| Gas-fired endothermic engine driven heat pumps - Part 5: Calculation of seasonal performances in heating and cooling mode | |
| GENERIC SPECIFICATION: WAVEGUIDE TYPE DIELECTRIC RESONATORS | |
| GENERIC SPECIFICTION: FILTERS USING WAVEGUIDE TYPE DIELECTRIC RESONATORS | |
| Geosynthetics - Characteristics required for use in surface erosion control on slopes and banks | |
| Glass in building - Acid etched glass - Part 1: Definitions and description | |
| Glass in building - Adhesive backed polymeric film - Part 1: Definitions and descriptions | |
| Glass in building - Adhesive backed polymeric filmed glass - Part 1: Definitions and descriptions | |
| Glass in building - Basic alumino silicate glass products - Part 1: Definitions and general physical and mechanical properties | |
| Glass in building - Basic alumino silicate glass products - Part 2: Evaluation of conformity/Product standard | |
| Glass in building - Determination of the load resistance of glass panes by calculation and testing | |
| Glass in building - Heat soaked thermally toughened alkaline earth silicate safety glass - Part 1: Definition and description | |
| Glass in building - Heat soaked thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard | |
| Glass in building - Laminated glass and laminated safety glass - Determination of interlayer mechanical properties | |
| Glass in building - Painted glass for internal use - Part 1: Requirements | |
| Glass in building - Painted glass for internal use - Part 2: Evaluation of conformity | |
| Glass in building - Thermally toughened soda lime silicate channel shaped safety glass - Part 1: Definition and description | |
| Glass in Building - Thermally toughened soda lime silicate channel shaped safety glass - Part 2: Evaluation of conformity/Product standard | |
| Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids | |
| Glass packaging - Screw finishes for pressure capsules - MCA 1 finish | |
| Glass packaging - Screw finishes for pressure capsules - MCA 3 finish | |
| Glass packaging - Screw finishes for pressure capsules - MCA 7,5 R finish | |
| Health informatics - Categorial structure for terminologies of human anatomy | |
| HEXAGON BOLTS WIHT FLANGE. HEAVY SERIES. | |
| HEXAGON BOLTS WITH FLANGE. SMALL SERIES | |
| HEXAGON NUTS WITH FLANGE. | |
| Hydrogen fuel - Product specification and quality assurance for hydrogen refuelling points dispensing liquid or gaseous hydrogen - Proton exchange membrane (PEM) fuel cell applications for vehicles | |
| Identification card systems. Inter-sector electronic purse. Part 3: Data elements and interchanges. | |
| IDENTIFICATION CARDS SYSTEMS. INTER-SECTOR ELECTRONIC PURSE. PART 4: DATA OBJECTS | |
| Industrial trucks - Safety requirements and verification - Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks | |
| Industrial trucks - Safety requirements and verification - Part 2: Supplementary requirements for self-propelled variable-reach trucks | |
| Industrial trucks - Safety requirements and verification - Part 3 Supplementary requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads (additional requirements to... | |
| Industrial valves - Minimum performance requirements | |
| Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of metal release - Part 1: Design and operation | |
| Information technology - RFID privacy impact assessment process | |
| Inorganic fertilizers - Determination of total nitrogen in urea, methylene-urea and urea formaldehyde | |
| Inorganic fertilizers - Extraction of phosphorus soluble in mineral acids | |
| Inorganic fertilizers - Extraction of phosphorus which is soluble in neutral ammonium citrate | |
| Inorganic fertilizers - Extraction of total calcium, total magnesium, total sodium and total sulfur in the forms of sulfates | |
| Inorganic fertilizers - Extraction of total sulfur present in various forms | |
| Inorganic fertilizers - Extraction of water-soluble calcium, magnesium, sodium and sulfur in the form of sulfates | |
| Inorganic fertilizers - Titrimetric determination of ammoniacal nitrogen | |
| Inorganic fertilizers and liming materials - Determination of specific elements - Determination of cadmium, chromium, copper, lead, nickel and zinc by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia... | |
| Intelligent transport systems — DATEX II data exchange specifications for traffic management and information — Part 1: Context and framework | |
| Intelligent transport systems - ECall - Additional data concept specification for cargo in vehicles | |
| Intermodal Transport Unit 45'PW. | |
| Laboratory local exhaust devices - Articulated extraction arms - Part 2: Commissioning and on-site testing | |
| Laminate floor coverings - Underlays - Specification, requirements and test methods | |
| Leather - Raw bovine hides and skins - Description, presentation and preservation | |
| Leisure accommodation vehicles - Motor Caravans - Part 2: User payload | |
| LEISURE ACCOMODATION VEHICLES - CARAVANS. PART 1: HABITATION REQUIREMENTS RELATING TO HEALTH AND SAFETY | |
| LEISURE ACCOMODATION VEHICLES - MOBILE HOMES (CARAVAN HOLIDAY HOMES). PART 1: HABITATION REQUIREMNETS RELATING TO HEALTH AND SAFETY | |
| LEISURE ACCOMODATION VEHICLES - MOTOR CARAVANS. PART 1: HABITATION REQUIREMENTS RELATING TO HEALTH AND SAFETY | |
| LEISURE ACCOMODATION VEHICLES. 12 V DIRECT CURRENT EXTRA LOW VOLTAGE ELECTRICAL INSTALLATIONS. PART 1: CARAVANS | |
| LEISURE ACCOMODATION VEHICLES. 12 V DIRECT CURRENT EXTRA LOW VOLTAGE ELECTRICAL INSTALLATIONS. PART 2: MOTOR CARAVANS | |
| LEISURE ACOMMODATION VEHICLES. CARAVANS. PART 2: USER PAYLOADS | |
| LEISURE ACOMMODATION VEHICLES. MOTOR CARAVANS. PART 2: USER PAYLOADS | |
| Levels of performance and acceptance for street cleaning and municipal waste management services - Part 1: General requirements | |
| LIGHT CONVEYOR BELTS. DETERMINATION OF THE COEFFICIENT OF FRICTION | |
| LIGHT CONVEYOR BELTS. DETERMINATION OF THE RELAXED ELASTIC MODULUS | |
| LIGHT CONVEYOR BELTS. TEST METHOD FOR THE MEASUREMENT OF THE ELECTROSTATIC FIELD GENERATED BY A RUNNING LIGHT CONVEYOR BELT | |
| LIGHT CONVEYOR BELTS. TEST METHODS FOR THE MEASUREMENT OF THE ELECTRICAL RESISTANCES | |
| Light weight fill and thermal insulation products for civil engineering applications (CEA) - Expanded clay lightweight aggregate products (LWA) | |
| Lightweight fill and thermal insulation products for civil engineering applications (CEA) - Expanded clay lightweight aggregate products (LWA) | |
| Lightweight Particleboards - Specifications | |
| LIQUID PETROLEUM PRODUCTS - PETROL - DETERMINATION OF ORGANIC OXYGENATE COMPUNDS AND TOTAL OXYGEN CONTENT BY GAS CHROMATOGRAPHY (O-FID) | |
| LPG equipment and accessories - Pipework systems and supports - LPG liquid phase and vapour pressure phase | |
| LPG equipment and accessories - Transportable refillable LPG cylinders other than traditional welded and brazed steel cylinders - Periodic inspection | |
| Machines and plants for minig and tooling of natural stones - Safety - Requirements for surface finishing machines | |
| Machines and plants for mining and tooling of natural stone - Safety - Requirements for circular block saws | |
| Machines and plants for mining and tooling of natural stone - Safety - Requirements for edge finishing machines | |
| Machines and plants for mining and tooling of natural stone - Safety - Requirements for gantry-type and cut-to-size saws | |
| MACHINES FOR UNDERGROUND MINES - REQUIREMENTS FOR APPLICATIONS IN AREAS OF MINES WITH FIREDAMP HAZARD - SAFETY REQUIREMENTS. | |
| MECHANICAL FASTENERS. HEXAGON PRODUCTS. WIDTHS ACROSS FLATS.S | |
| Minimum requirements for remanufactured and compatible cartridges to safeguard proper interaction with inkjet printer systems | |
| Motorcyclists' protective clothing against mechanical impact - Part 4: Motorcyclists' inflatable protectors - Requirements and test methods | |
| Mountaineering equipment - Avalanche airbag systems - Safety requirements and test methods | |
| Mouthguards for use in sports - Safety requirements and test methods | |
| Natural stone test methods - Determination of resistance of marble to thermal and moisture cycles | |
| NON-DESTRUCTIVE EXAMINATION OF WELDS. ACCEPTANCE CRITERIA FOR ULTRASONIC EXAMINATION OF WELDED JOINTS. | |
| NON-DESTRUCTIVE EXAMINATION OF WELDS. ULTRASONIC EXAMINATION. CHARACTERIZATION OF IMPERFECTIONS IN WELDS. | |
| NON-DESTRUCTIVE TESTING OF WELDS. ULTRASONIC EXAMINATION OF WELDED JOINT. | |
| ODOUR AND FLAVOUR IN WATERS - QUANTITVE METHOD - METHOD FOR THE DETERMINATION OF THRESHOLD ODOUR AND FLAVOUR NUMBERS (TON AND TFN). | |
| One off Kachelgrundöfen/Putz grundöfen (tiled/mortared stoves) - Calculation method | |
| Ophthalmic optics - Instruments and test methods for assessing drivers' vision - Part 1: Visual acuity | |
| PARAGLIDING EQUIPMENT - HARNESS - REQUIREMENT AND TEST METHODS | |
| Paragliding equipment - Harnesses - Safety requirements and strength tests | |
| Pedestrian doorsets, industrial, commercial, garage doors and windows - Product standard, performance characteristics - Fire resistance and/or smoke control characteristics | |
| Permanently installed outdoor fitness equipment - Safety requirements and test methods | |
| Personal eye-protection - Non-optical test methods | |
| Personal eye-protection - Optical test methods | |
| Personal eye-protection - Specifications | |
| PLASTIC PIPING SYSTEMS. THERMOPLASTICS VALVES. TEST METHOD FOR THE INTEGRITY OF A VALVE AFTER EXTERNAL BLOW. | |
| Plastics piping systems - Environmental product declarations - Product Category Rules complementary to EN 15804, for buried plastics piping systems | |
| Plastics piping systems - Environmental product declarations - Product Category rules complementary to EN 15804, for plastic piping systems inside buildings | |
| PLASTICS PIPING SYSTEMS FOR GASEOUS FUELS SUPPLY. POLYETHYLENE (PE). PART 6: RECOMMENDED PRACTICE | |
| PLASTICS PIPING SYSTEMS FOR NON-PRESSURE DRAINAGE AND SEWERAGE. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON POLYESTER RESIN (UP). PART 1: GENERAL | |
| PLASTICS PIPING SYSTEMS FOR NON-PRESSURE DRAINAGE AND SEWERAGE. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON POLYESTER RESIN (UP). PART 2: PIPES WITH FLEXIBLE, REDUCED ARTICULATION OR RIGID JOINTS | |
| PLASTICS PIPING SYSTEMS FOR NON-PRESSURE DRAINAGE AND SEWERAGE. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON POLYESTER RESIN (UP). PART 3: FITTINGS | |
| PLASTICS PIPING SYSTEMS FOR NON-PRESSURE DRAINAGE AND SEWERAGE. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON POLYESTER RESIN (UP). PART 4: ANCILLARY EQUIPMENT | |
| PLASTICS PIPING SYSTEMS FOR NON-PRESSURE DRAINAGE AND SEWERAGE. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON POLYESTER RESIN (UP). PART 5: FITNESS FOR PURPOSE OF THE SYSTEM | |
| PLASTICS PIPING SYSTEMS FOR NON-PRESSURE DRAINAGE AND SEWERAGE. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON POLYESTER RESIN (UP). PART 6: RECOMMENDED PRACTICE FOR INSTALLATION | |
| Plastics piping systems for non-pressure underground conveyance and storage of surface water - Boxes used for infiltration, attenuation and storage systems - Part 1: Specifications for boxes made of PP... | |
| Plastics piping systems for non-pressure underground conveyance and storage of surface water - Part 1: Test method for determination of long-term compression strength of boxes | |
| Plastics piping systems for non-pressure underground conveyance and storage of surface water - Part 2: Test method for determination of creep behaviour of boxes | |
| PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE. CHLORINATED POLY(VINYL CHLORIDE) (PVC-C). PART 6: RECOMMENDED PRACTICE FOR INSTALLATION | |
| PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE. STYRENCE COPOLYMER BLENDS (SAN + PVC). PART 6: RECOMMENDED PRACTICE FOR INSTALLATION | |
| PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. TEST METHOD AND ASSESMENT OF THE RESISTANCE TO CYCLIC INTERNAL PRESSURE. | |
| PLASTICS PIPING SYSTEMS. THERMOPLASTICS VALVES. TEST METHOD FOR THE INTEGRITY OF A VALVE AFTER TEMPERATURE CYCLING UNDER BENDIDNG | |
| PLASTICS PIPING SYSTEMS. VALVES FOR PE PIPING SYSTEMS. TEST METHOD FOPR LEAKTIGHNESS UNDER AND AFTER BENDING APPLIED TO THE OPERATING MECHANISM | |
| Plastics. Recycled plastics. Sample preparation | |
| Plastics. Recycled plastics. Sampling procedures for testing plastics waste and recyclates | |
| Playing field equipment - Portable and fixed goals - Functional, safety requirements and test methods | |
| Playing field equipment - Portable and permanent socketed goals - Functional, safety requirements and test methods | |
| Portable aerosol dispenser for fire extinguishing purposes | |
| Portable equipment for projecting extinguishing agents and firefighting support operations - Portable monitors - Part 1 : General requirements for portable monitor assemblies | |
| Portable equipment for projecting extinguishing agents and firefighting support operations - Portable monitors - Part 2: Water nozzles | |
| Portable equipment for projecting extinguishing agents and firefighting support operations - Portable monitors - Part 3: Foam devices | |
| Power operated pedestrian doorsets - Product standard, performance characteristics - Pedestrian doorsets, other than swing type, initially designed for installation with power operation | |
| Powered industrial trucks - Visibility - Test methods and verification - Part 11: Pallet stacking trucks (rider controlled) | |
| PRESSURE EQUIPMENT MADE FROM BOROSILICATE GLASS 3.3 GENERAL RULES FOR DESIGN, MANUFACTURE AND TESTING. | |
| Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their... | |
| PRESSURE SEWERAGE SYSTEMS. | |
| PREVAILING TORQUE TYPE ALL METAL HEXAGON NUTS WITH FLANGE WITH METRIC FINE PITCH THREAD. | |
| PREVAILING TORQUE TYPE ALL-METAL HEXAGON NUTS WITH FLANGE. | |
| PREVAILING TORQUE TYPE HEXAGON NUTS WITH FLANGE (WITH NON-METALLIC INSERT) WITH METRIC FINE PITCH THREAD. | |
| PREVAILING TORQUE TYPE HEXAGON NUTS WITH FLANGE (WITH NON-METALLIC INSERT) | |
| Primers for cold and hot applied joint sealants - Part 1: Test method for the determination of homogeneity | |
| Primers for cold and hot applied joint sealants - Part 2: Test method for the determination of resistance against alkali | |
| Primers for cold and hot applied joint sealants - Part 3: Test method for the determination of drying behaviour and solids content | |
| Product Category Rules for ceramic sanitary appliances | |
| Product category rules for ceramic tiles | |
| Products used for treatment of water intended for human consumption - Natural Zeolite | |
| Professional indoor UV exposure services - Part 1: Requirements for the provision of training | |
| Professional indoor UV exposure services - Part 2: Required qualification and competence of the indoor UV exposure consultant | |
| Professional indoor UV exposure services - Part 3: Requirements for the provision of services | |
| Protective Clothing - Body Armour - Part 1: General requirements | |
| Protective Clothing - Body Armour - Part 2: Bullet resistance, requirements and test methods | |
| Protective Clothing - Body Armour - Part 3: Knife and Spike Resistance, Requirements and test methods | |
| Protective clothing - Protection against liquid chemicals - Performance requirements for chemical protective clothing with liquid-tight connections between different parts of the clothing for emergency teams (Type 3 ET Equipment)... | |
| Public transport - Service interface for real-time information relating to public transport operations - Part 1: Context and framework | |
| Public transport - Service interface for real-time information relating to public transport operations - Part 2: Communications | |
| Public transport - Service interface for real-time information relating to public transport operations - Part 3: Functional service interfaces | |
| Pumps - Methods of qualification of the Energy Efficiency Index for rotodynamic pump units - Part 3: Testing and calculation of energy efficiency index (EEI) of booster sets | |
| Pumps - Minimum required efficiency of rotodynamic water pumps | |
| Pumps - Rotodynamic Pumps - Energy efficiency Index - Methods of qualification and verification - Part 3: Testing and calculation of energy efficiency index (EEI) of booster sets | |
| Pyrotechnic articles - Fireworks, category F4 - Part 1: Terminology | |
| Pyrotechnic articles - Fireworks, Category F4 - Part 2: Requirements | |
| Pyrotechnic articles - Fireworks, Category F4 - Part 3: Test methods | |
| Pyrotechnic articles - Fireworks, Category F4 - Part 4: Minimum labelling requirements and instructions for use | |
| Pyrotechnic articles - Fireworks, Category F4 | |
| Pyrotechnic articles - Other pyrotechnic articles - Ignition devices | |
| Pyrotechnic articles - Other pyrotechnic articles - Part 1: Terminology | |
| Pyrotechnic articles - Other pyrotechnic articles - Part 2: Requirements | |
| Pyrotechnic articles - Other pyrotechnic articles - Part 3: Categories and types | |
| Pyrotechnic articles - Other pyrotechnic articles - Part 4: Test methods | |
| Pyrotechnic articles - Other pyrotechnic articles - Part 5: Minimum labelling requirements and instructions for use | |
| Pyrotechnic articles - Other pyrotechnic articles | |
| Railway applications – Markings of railway vehicles – Part 2: External markings on coaches, traction units and railbound machines | |
| Railway applications - Ballastless track systems - Part 1: General requirements | |
| Railway applications - Ballastless track systems - Part 4: Special ballastless track systems for attenuation of vibration | |
| Railway applications - Bogies and running gear - Part 1: General principles | |
| Railway applications - Braking - Brake blocks | |
| Railway applications - Braking - Brake performance | |
| Railway applications - Closing and locking devices for payload protecting devices of freight wagons | |
| Railway applications - Driver's cabs - Part 9 : External visibility for metro vehicles | |
| Railway applications - Environmental conditions - Design guidance for rolling stock | |
| Railway Applications - Fatigue strength assessment of railway vehicle structures based on cumulative damage | |
| Railway applications - Infrastructure - Demountable machines, trailers and associated equipment - General safety and technical requirements for travelling and working | |
| Railway applications - Infrastructure - Hollow sleepers and bearers | |
| Railway applications - Infrastructure - Mechanical requirements for joints in running rails | |
| Railway applications - Infrastructure - Non-destructive testing on rails in track - Part 1: Requirements for ultrasonic inspection and evaluation principles | |
| Railway applications - Infrastructure - Restoration of rails by electric arc welding | |
| Railway applications - Infrastructure- Noise barriers and related devices acting on airborne sound propagation - Non-acoustic performance - Part 2-1: Mechanical performance under dynamic loadings due to passing trains -... | |
| Railway applications - Measurement of wheel and axle loads - Part 1: Interoperable 'in-service' rail vehicles | |
| Railway applications - Monoblock wheel products - Cast wheels | |
| Railway applications - Platform barrier systems | |
| Railway applications - Strength assessment of railway vehicle structures - Part 3: Fatigue strength assessment based on cumulative damage | |
| Railway applications - System Engineering requirements for bogies and running gear | |
| Railway applications - Testing for the acceptance of running characteristics of freight vehicles with static wheel loads higher than 112,5 kN up to 125 kN | |
| Railway applications - Testing for the acceptance of running characteristics of railway vehicles - Freight wagons - Testing of running safety under longitudinal compressive forces | |
| Railway applications - Testing for the acceptance of running characteristics of railway vehicles with cant deficiency compensation system and/or vehicles intended to operate with higher cant deficiency than stated in... | |
| Railway applications - Track - Concrete sleepers and bearers with under sleeper pads | |
| Railway applications - Track - Road rail machines and associated equipment - Part 1: Technical requirements for travelling and working | |
| Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements | |
| Railway applications - Track - Road-rail machines and associated equipment - Part 3: Technical requirements for running | |
| Railway applications - Track - Road-rail machines and associated equipment - Part 4: Technical requirements for running, travelling and working on urban rail | |
| Railway applications. Automatic coupler. Performance requirements, specific interface geometry and test method | |
| Railway applications. Bogies and running gear. Part 2: Structural requirements | |
| Railway applications. Bogies and running gear. Part 3: Dynamic requirements | |
| Railway applications. Bogies and running gear. Part 4: Maintenance requirements | |
| Railway applications. Track. Demountable machines and associated equipment. Part 1: Technical requirements for running and working | |
| Railway applications. Track. Demountable machines and associated equipment. Part 2: General safety requirements | |
| Railway applications. Track. Trailers and associated equipment. Part 1: Technical requirements for running and working | |
| Railway applications. Track. Trailers and associated equipment. Part 2: General safety requirements | |
| RECIPROCATING INTERNAL COMBUSTION ENGINES. SAFETY. PART 1: COMPRESSION IGNITION ENGINES | |
| Recirculatory Filtration Fume Cupboards | |
| Refrigerating systems and heat pumps - Qualification of tightness of components and joints | |
| Residential solid fuel burning appliances - Part 2-1: Roomheaters | |
| Residential solid fuel burning appliances - Part 2-2: Inset appliances including open fires | |
| Residential solid fuel burning appliances - Part 2-3: Cookers | |
| Residential solid fuel burning appliances - Part 2-4: Independent boilers - Nominal heat output up to 50 kW | |
| Residential solid fuel burning appliances - Part 2-6: Mechanically by wood pellets fed roomheaters, inset appliances and cookers | |
| Residential solid fuel burning appliances - Part 2-8: Gravimetrically pellet-fed room heaters | |
| Residential solid fuel burning appliances - Part 2-9: Appliances fired batchwise with wood pellets in fuel baskets | |
| Resilient floor coverings - Measurement of in-room impact noise | |
| Resilient, textile, laminate and modular mechanical locked floor coverings, underlays - Environmental product declarations - Product category rules | |
| Road vehicles - Carrying vehicles for swap bodies class C, swap tanks class C and 20' ISO containers - Interface dimensions | |
| Road vehicles - Supplementary grip devices for tyres of passenger cars and light duty vehicles - Part 2: Specific test procedures | |
| Road vehicles - Supplementary grip devices for tyres of passenger cars and light duty vehicles - Part 3: Production control (self monitoring) and third-party surveillance | |
| Road vehicles - Supplementary grip devices for tyres of passenger cars and light duty vehicles - Safety requirements and test method | |
| Rough terrain variable reach trucks. Visibilit. Test methods and verification | |
| Safety and control devices for gas burners and gas burning appliances - Gas filters having a maximum working pressure up to and including 600 kPa | |
| Safety requirements for cableway installations designed to carry persons - Precommissioning inspection, maintenance, operational inspection and checks | |
| Safety requirements for lifting tables - Part 2: Lifting tables serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15... | |
| Safety requirements for lifting tables | |
| Sanitary appliances - Shower trays made from impact modified extruded acrylic sheets - Requirements and test methods | |
| Sawn softwood. Visual grading. Part 2: Quality grading for european spruces and firs. | |
| SAWN SOFTWOOD. VISUAL GRADING. PART 3: QUALITY GRADING FOR EUROPEAN PINES | |
| SECTIONAL SPECIFICATION: WAVEGUIDE TYPE DIELECTRIC RESONATORS | |
| Self-propelled agricultural machines - Road safety - Basic requirements | |
| Services of Medical Doctors with additional qualification in Homeopathy (MDQH) - Requirements for health care provision by Medical Doctors with additional qualification in Homeopathy | |
| Simple Publishing Interface | |
| Simple Query Interface | |
| Sludge, treated biowaste and soil - Determination of adsorbable organically bound halogens (AOX) | |
| Sludge, treated biowaste and soil - Determination of elements using graphite furnace atomic absorption spectrometry (GF-AAS) | |
| Sludge, treated biowaste and soil - Determination of elements using inductively coupled plasma mass spectrometry (ICP-MS) | |
| Sludge, treated biowaste and soil - Determination of elements using inductively coupled plasma optical emission spectrometry (ICP-OES) | |
| Sludge, treated biowaste and soil - Determination of Kjeldahl nitrogen | |
| Sludge, treated biowaste and soil - Determination of mercury - Part 1: Cold-vapour atomic absorption spectrometry (CV-AAS) | |
| Sludge, treated biowaste and soil - Determination of mercury - Part 2: Cold-vapour atomic fluorescence spectrometry (CV-AFS) | |
| Sludge, treated biowaste and soil - Determination of pH | |
| Sludge, treated biowaste and soil - Determination of polychlorinated biphenyls (PCB) by gas chromatography with mass selective detection (GC-MS) and gas chromatography with electron-capture detection (GC-ECD) | |
| Sludge, treated biowaste and soil - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC) | |
| Sludge, treated biowaste and soil - Determination of specific electrical conductivity | |
| Sludge, treated biowaste and soil - Determination of total nitrogen using dry combustion method | |
| Sludge, treated biowaste and soil - Digestion of aqua regia soluble fractions of elements | |
| Sludge, treated biowaste and soil - Digestion of nitric acid soluble fractions of elements | |
| Sludge, treated biowaste, soil and waste - Calculation of dry matter fraction after determination of dry residue or water content | |
| Sludge, treated biowaste, soil and waste - Determination of loss on ignition | |
| Sludge, treated biowaste, soil and waste - Determination of total organic carbon (TOC) by dry combustion | |
| Slurry surfacing - Specification for airfields | |
| Small bore connectors for liquids and gases in healthcare applications - Part 2 - Connectors for respiratory applications | |
| Soil improvers and growing media - Determination of the aerobic biological degradation rate of organic matter - Part 1: Oxygen uptake rate (OUR) | |
| Soil improvers and growing media - Determination of the aerobic biological degradation rate of organic matter - Part 2: Self heating test for compost | |
| Space - Space Situational Awareness Monitoring - Part 01: Glossary of Near Earth objects and space surveillance and tracking terms | |
| Space engineering - CANbus extention protocol | |
| Space engineering - Interface management | |
| Space engineering - Telemetry and telecommand packet utilization | |
| Space product assurance - Product assurance management | |
| Space project management - Integrated support and services engineering (ISSE) | |
| SPECIFICATION FOR COLD WATER STORAGE CISTERNS OPEN TO ATMOSPHERE FOR USE WITHIN DWELLINGS. | |
| SPECIFICATION FOR COPPER HOT WATER STORAGE COMBINATION UNITS FOR DOMESTIC PURPOSES. | |
| Steel static storage systems - Adjustable pallet racking systems - Principles for structural design | |
| Sterilizers for medical purposes - Low temperature vaporized hydrogen peroxide sterilizers - Requirements and testing | |
| Sterilizers for medical purposes - Low temperature vapourized hydrogen peroxide sterilizers - Requirements and testing | |
| Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 4: Calculation methods of the greenhouse gas emission balance using... | |
| Sustainability of construction works - Environmental product declarations - Product Category Rules for flat glass and channel shaped glass products | |
| Sustainability of construction works - Environmental product declarations - Product Category Rules for precast concrete products | |
| Sustainability of construction works - Environmental product declarations - Product category rules | |
| Sustainability of construction works - Methodology for the assessment of performance of buildings - Part 1: Environmental Performance | |
| Tanks for transport of dangerous goods - Digital interface for the data transfer between tank vehicle and with stationary facilities - Part 2: Commercial and logistic data | |
| Testing of ceramic and basic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by inductively coupled plasma optical emission spectrometry (ICP OES)... | |
| Testing of ceramic raw and basic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by OES by DC arc excitation | |
| Textile child care articles - Safety requirements and test methods for children's sleep bags for use in a cot | |
| Textile floor coverings - Minimum requirements for needled floor coverings for single usage in events of limited duration | |
| TEXTILES AND TEXTILE PRODUCTS - BURNING BEHAVIOUR OF INDUSTRIAL AND TECHNICAL TEXTILES - PROCEDURE TO DETERMINE THE FLAME SPREAD OF VERTICALLY ORIENTED SPECIMENS | |
| TEXTILES AND TEXTILE PRODUCTS. BURNING BEHAVIOUR. INDUSTRIAL AND TECHNICAL TEXTILES. DETAILED PROCEDURE TO DETERMINE THE IGNITABILITY OF VERTIVALLY ORIENTED SPECIMENS | |
| The GC-MS identification of water leachable organic substances from materials in contact with water intended for human consumption | |
| Thermal and/or sound insulating products in building construction - Bound EPS ballastings - Part 1: Requirements for factory premixed EPS dry plaster | |
| Thermal insulating products for building applications - Determination of the hygrothermal behaviour of external thermal insulation composite systems with renders (ETICS) | |
| Thermal insulation products for building - Factory made vegetal fibres based products (VFBP) | |
| Thermal insulation products for building applications - Determination of the pull-through resistance of anchors through thermal insulation products | |
| Thermal insulation products for building equipment and industrial installations - Determination of soot fire resistance of thermal insulation products for the use in chimneys | |
| Thermal insulation products for building equipment and industrial installations - Determination of thermal resistance by means of the guarded hot plate method - Part 1: Measurements at elevated temperatures from... | |
| Thermal insulation products for building equipment and industrial installations - Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products - Specification | |
| Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculate (EV) products - Part 1: Specification for bonded and loose-fill products before installation... | |
| Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2: Specification for the installed products | |
| Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation... | |
| Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2: Specification for the installed products | |
| Thermal insulation products for buildings - External thermal insulation composite kits with a rendering system (ETIC kits) - Characteristics | |
| Thermal insulation products for buildings - External thermal insulation composite systems with renders (ETICS) - Specification | |
| Thermal insulation products for buildings - Factory made composite products - Specification | |
| Thermal insulation products for buildings - Factory made reflective insulation products (RI) - Specification | |
| Thermal insulation products for buildings - Factory-made vacuum insulation panels (VIP) - Specification | |
| Thermoplastics static tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Secondary containments used with tanks complying with EN 13341 - Requirements and test methods... | |
| Transportable gas cylinders. Cylinder bundles. Periodic inspection and testing | |
| Tunnel boring machines - Safety requirements | |
| Ventilation for buildings - Air Diffusion - Aerodynamic testing and rating for mixed flow application: non-isothermal procedure for a cold jet | |
| Ventilation for buildings - Air Diffusion - Measurements in the occupied zone of airconditioned/venti lated rooms to evaluate thermal and acoustic conditions | |
| Ventilation for buildings - Ductwork - Cleanliness of ventilation systems | |
| Ventilation for buildings - Ductwork - Technical ductwork products, leakage classification and testing | |
| Ventilation for buildings - Fire dampers | |
| Ventilation for buildings - Fire resisting duct sections | |
| Ventilation for buildings - Measurement of air flows on site - methods | |
| Ventilation for buildings - Ventilation systems in residential buildings - Design | |
| Waste management - Waste visual elements | |
| Water conditioning equipment inside buildings - Adjustable chemical dosing systems - Requirements for performance, safety and testing | |
| Water quality - Guidance on pro-rata multi-habitat sampling of benthic macroinvertebrates from rivers and streams | |
| Water quality - Guidance on the estimation of fish abundance with mobile hydroacoustic methods | |
| Water quality - Guidance standard on assessing the hydromorphological features of lakes | |
| Water quality. Guidance standard for the surveying, sampling and laboratory analysis of phytobenthos in shallow running water | |
| WELDING CONSUMABLES. RODS, WIRES AND DEPOSITS FOR TUNGSTEN INERT GAS WELDING OF NON ALLOY FINE GRAIN STEELS. CLASSIFICATION. | |
| WELDING. BASIC WELD JOINT DETAILS IN STEEL. PART 1: PRESSURIZED COMPONENTS. | |
| Winter and road service area equipment - Power system and related controls - Power hydraulic system and electric interfaces | |
| Winter maintenance equipment — Spreading machines (gritting machines) — Part 1: General requirements and definitions for spreading machines | |
| Winter maintenance equipment - Road weather information systems - Part 1: Global definitions and components | |
| Winter maintenance equipment - Road weather information systems - Part 2: Road weather - Recommended observation and forecast | |
| Winter maintenance equipment - Road weather information systems - Part 3: Requirements on measured values of stationary equipments | |
| Winter maintenance equipment - Road weather information systems - Product description and performance | |
| Winter maintenance equipment - Snow ploughs - Part 1: Product description and requirements | |
| Winter maintenance equipment - Snow ploughs - Part 2: Testing criteria and their requirements | |
| Winter maintenance equipment - Snow removal machines with rotating tools - Specification and clearing capacity | |
| Winter service equipment and products - De-icing agents - Part 1: Sodium chloride - Requirements and test methods | |
| Winter service equipment and products - De-icing agents - Part 2: Calcium chloride and Magnesium chloride - Requirements and test methods | |
| WOOD. SOFTWOOD SAWN TIMBER. VISUAL GRADING. PART 1: CRITERIA FOR QUALITY STANDARDS. |
| << Prev | Next >> |