AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| Adhesives - Powder aminoplast resins - Determination of formaldehide release under specific conditions by the gas analysis method | |
| Adhesives - Test method for cementitious and calciumsulfate-based floor levelling compounds - Determination of shrinkage | |
| Adhesives for load bearing timber structures other than phenolic and aminoplasctic - Test methods - Part 1: Static load test of single bondline specimens in compression shear | |
| Adhesives, phenolic and aminoplastic for finger-joints in lamellae, for load-bearing timber structures - Part 1: Classification and performance | |
| Advanced technical ceramics - Ceramic composites - Determination of elastic properties by resonant beam method up to 2 000 °C | |
| Advanced technical ceramics - Ceramic composites. Mechanical properties at high temperature under inert atmosphere - Determination of fatigue properties at constant amplitude | |
| Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of fatigue properties at constant amplitude | |
| Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of fatigue properties at constant amplitude | |
| Agglomerated stone - Slabs and tiles for wall finishes (internal and external) | |
| Agglomerated stone. Test methods. Part 3: Determination of slipperiness | |
| Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 5: Multisplit air conditioning and air to air heat pumps systems. | |
| Aluminium and aluminium alloys - Determination of the chemical composition of aluminium and aluminium alloys by spark optical emission spectrometry | |
| Aluminium and aluminium alloys - Requirements for anodised products for use in contact with foodstuff | |
| Aluminium and aluminium alloys - Structural products for construction works - Performance assessment and declaration | |
| Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery | |
| Anti-seismic devices - Part 1: General Design Rules | |
| Anti-seismic devices - Part 6: Sliding isolators | |
| Application Interface for smart cards used as Secure Signature Creation Devices - Part 1: Basic services | |
| Application Interface for smart cards used as Secure Signature Creation Devices - Part 2: Additional services | |
| Assessment of concrete compressive strength in structures or in structural elements. | |
| Assessment of concrete compressive strength in structures or in structural elements | |
| Automotive fuels - Ethanol (E85) automotive fuel - Requirements and test methods | |
| AUTOMOTIVE LPG FILLING SYSTEM - PART 1: DIMENSIONS AND TEST REQUIREMENTS FOR THE CONNECTOR | |
| Bidets - Functional requirements and test methods | |
| Biological durability of wood and wood-based products - Quantitative determination of pentachlorophenol in wood - Gas chromatographic method | |
| Bitumen and bituminous binders - Determination of Zero-Shear Viscosity (ZSV) using a Shear Stress Rheometer in creep mode | |
| Bitumen and bituminous binders - Specification framework for polymer modified bitumens | |
| Bitumen and bituminous binders. Framework for specifying cationic bitumen emulsions. | |
| Bitumen and bituminous binders. Specifications for plymer modified bitumens | |
| Bitumens and bituminous binders - Determination of the softening point - Ring and Ball method | |
| Bitumens and bituminous binders - Determination of water content in bituminous emulsions - Azeotropic distillation method | |
| Blank detail specification: Fixed low power film resistors | |
| BLANK DETAIL SPECIFICATION: FIXED LOW POWER NON-WIRE WOUND RESISTORS (ASSESSMENT LEVEL P) | |
| BLANK DETAIL SPECIFICATION: FIXED LOW POWER NON-WIRE WOUND SURFACE MOUNTING (SMD) RESISTORS. | |
| BLANK DETAIL SPECIFICATION: FIXED LOW POWER WIRE WOUND SURFACE MOUNTING (SMD) RESISTORS | |
| BLANK DETAILS SPECIFICATION: FIXED LOW POWER NON-WIRE WOUND RESISTORS (ASSESSMENT LEVEL M) | |
| BLANK DETAILS SPECIFICATION: FIXED LOW POWER NON-WIRE WOUND RESISTORS (ASSESSMENT LEVELS SB AND SC) | |
| Blinds and shutters - Thermal and visual comfort - Test methods | |
| Brazing - Guidance on the application of brazed joints | |
| Building hardware - Electrically controlled hold-open systems for fire/smoke door assemblies - Requirements, test methods application and maintenance | |
| Building hardware - Fittings for shutters - Requirements and test methods | |
| Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methods | |
| Building valves - Combined temperature and pressure relief valves - Tests and requirements | |
| Candles - Specification for sooting behaviour | |
| Characterization of sludges - Determination of adsorbable organically bound halogens | |
| Characterization of sludges - Laboratory chemical conditioning procedure | |
| Chemical disinfectants and antiseptics - Application of European Standards for chemical disinfectants and antiseptics | |
| Chemicals used for treatment of swimming pool water - Sodium dichloroisocyanurate , anhydrous | |
| Chemicals used for treatment of swimming pool water - Sodium dichloroisocyanurate , dihydrate | |
| Chemicals used for treatment of swimming pool water - Sodium hydrogen carbonate | |
| Chemicals used for treatment of swimming pool water - Sodium hydroxide | |
| Chemicals used for treatment of swimming pool water - Sodium hypochlorite | |
| Chemicals used for treatment of swimming pool water - Sulfuric acid | |
| Chemicals used for treatment of water intended for human consumption - Iron (III) sulfate, solid | |
| Chemicals used for treatment of water intended for human consumption - Silver salts for intermittent use | |
| Chemicals used for treatment of water intended for human consumption - Sodium chlorate | |
| Child care articles - Cutlery, feeding utensils and food feeders - Safety requirements and tests | |
| Chimney - Clay/ceramic flue liners - Part 1: Flue liners operating under dry conditions - Requirements and test methods | |
| Chimneys - Clay/ceramic flue liners - Part 2: Flue liners operating under wet conditions - Requirements and test methods | |
| CLOSED EXPANSION VESSELS WITH BUILT IN DIAPHRAGM FOR INSTALLATION IN WATER SYSTEMS | |
| Cold applied joint sealants - Test methods - Part 5: Determination of the resistance to hydrolysis | |
| Cold applied joint sealants - Test methods - Part 7: Determination of the resistance to flame | |
| Cold applied joint sealants - Test methods - Part 9: Function testing of joint sealants | |
| Concrete pavements - Test methods - Part 2: Determination of saturated density of cores | |
| Container shells for mobile waste containers with a capacity up to 1 700 l - Performance requirements and test methods | |
| Conveyor belts for use in underground installations - Electrical and flammability safety requirements | |
| Cookware - Ovenware for use in traditional domestic ovens | |
| Copper and copper alloys - Determination of chromium content - Part 1: Titrimetric method | |
| Copper and copper alloys - Plumbing fittings - Recommended practice for the installation of copper and copper alloy plumbing fittings | |
| Cranes - Bridge and gantry cranes | |
| Cranes - Manually controlled load manipulators | |
| Cranes - Power driven winches and hoists - Part 1: Power driven winches | |
| Cranes - Requirements for container handling spreaders | |
| Cranes - Safety - Tower cranes | |
| Cranes - Tower cranes | |
| Cranes. Offshore cranes. Part 1: General-purpose offshore cranes | |
| Curing compounds - Test methods - Part 1: Determination of water retention efficiency of common curing compounds | |
| Decorative oil lamps - Safety requirements and test methods | |
| Design and application of plasterboard systems on frames - Part 1: General | |
| Design and installation of preinsulated bonded pipe systems for district heating | |
| Detail specification: Fixed low power film resistors - Metal film resistors on high grade ceramic, conformal coated or molded, axial or preformed leads | |
| Detail specification: Fixed low power film SMD resistors - Cylindrical - Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2 | |
| Detail specification: Fixed low power film SMD resistors - Rectangular - Stability classes 0,1; 0,25; 0,5; 1 | |
| Detail specification: Fixed low power film SMD resistors - Rectangular - Stability classes 1; 2 | |
| Detail specification: Fixed low power non wire-wound high stability surface mount (SMD) resistors - Rectangular - Stability classes 0,1; 0,25 | |
| Detail specification: Fixed low power wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 0,5; 1; 2 | |
| Devices to prevent pollution by backflow of potable water - Pipe interrupter with permanent atmospheric vent DN 10 to DN 20 - Family D, type C | |
| Double skin metal faced insulating panels - Factory made products - Specifications - Part 2: Structural applications - Fixings and potential uses of stabilization of individual structural elements | |
| Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods | |
| Elastomeric packed metallic stripwound safety gas hose assemblies for the connection of domestic appliances using gaseous fuels | |
| Emergency safety showers - Part 3: Non plumbed-in body showers | |
| Emergency safety showers - Part 4: Non plumbed-in eyewash units | |
| End-of-life tyre - Recycling - Materials | |
| Energy performance of buildings - Assessment of energy use and definition of ratings | |
| Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-2: Space heating generation systems, heat pump systems, Module M3-8-2, M8-8-2 | |
| Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 5: Space heating and DHW storage systems (not cooling), Module M3-7, M8-7 | |
| Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 7-1: DHW instantaneous heat recovery- Module M8-13 | |
| Execution of special geotechnical works - In-situ soil mixing | |
| Execution of special geotechnical works - Reinforced fill | |
| Execution of special geotechnical works. Soil nailing | |
| Explosion isolation systems | |
| Explosion protection in underground mining - Protective systems - Part 3: Water troughs for explosion barriers | |
| Explosives for civil uses - Part 3: Information to be provided by the manufacturer or his authorized representative to the user | |
| Explosives for civil uses. Detonators and relays. Part 14: Determination of resistance of electric detonators to the influence of radio frequency radiation | |
| Extended application of results from fire resistance tests - Non- loadbearing walls - Part 1: General | |
| Extended application of results from fire resistance tests - Non- loadbearing walls - Part 2: Masonry and Gypsum Blocks | |
| Extended application of results from fire resistance tests - Non-loadbearing ceilings - Part 7: Metal sandwich panel construction | |
| Extended application of results from fire resistance tests - Non-loadbearing walls - Part 3: Lightweight partitions | |
| Extended application of results from fire resistance tests - Non-loadbearing walls - Part 5: Metal sandwich panel construction | |
| Extended application of results from fire resistance tests - Non-loadbearing walls - Part 7: Non-load bearing sandwich panels - Ceilings | |
| Extended application of results from fire resistance tests - Part 11: Dampers | |
| Extended application of results from fire resistance tests - Part 12: Loadbearing masonry walls | |
| Extended application of results from fire resistance tests - Part 12: Penetration seals | |
| Extended application of results from fire resistance tests - Part 13: Load bearing columns | |
| Extended application of results from fire resistance tests - Part 15: Linear joint seals | |
| Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies including their elements of building hardware - Part 10 - Fire resistance... | |
| Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 11: Fire resistance of... | |
| Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 12: Fire resistance of... | |
| Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 2: Fire resistance of... | |
| Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 3: Fire resistance of... | |
| Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 5: Fire resistance of... | |
| Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 6: Fire resistance of... | |
| Extended application of test results for fire resistance for doorsets and shutter assemblies - For doors and shutters - Part 2: Steel hinged and pivoted doorsets | |
| Extended application of test results for fire resistance for doorsets and shutter assemblies - Part 3: Timber hinged and pivoted doorsets | |
| Facility Management - Agreeements - Guidance on how to prepare Facility Management agreements | |
| Facility Management - Part 3: Guidance on quality in Facility Management | |
| Facility Management - Part 4: Taxonomy, Classification and Structures in Facility Management | |
| Facility Management - Part 5: Guidance on Facility Management processes | |
| Facility Management - Part 6: Area and Space Measurement in Facility Management | |
| Factory-made double skin metal faced insulating sandwich panels - Part 1: Self-supporting applications | |
| Factory-made double skin metal faced insulating sandwich panels - Part 3: Test methods for determining mechanical strength, building physical behaviour and durability | |
| Factory-made double skin metal faced insulating sandwich panels - Part 4: Test methods for fixing of panels to substructure and for determining restraining effect on substructure | |
| Factory-made double skin metal faced insulating sandwich panels - Part 5: Design methods - Determination criteria for combining actions and spans | |
| Fairground and amusement park machinery and structure - Safety | |
| FATTY FOOD - QUANTITATIVE DETERMINATION OF PESTICIDES AND POLYCHLORI- NATED BIPHENYLS (PCBS) - PART 1: GENERAL CONSIDERATIONS. | |
| FATTY FOOD - QUANTITATIVE DETERMINATION OF PESTICIDES AND POLYCHLORI- NATED BIPHENYLS (PCBS) - PART 2: EXTRACTION OF FAT, PESTICIDES AND PCB, AND DETERMINATION OF FAT CONTENT. | |
| FATTY FOOD - QUANTITATIVE DETERMINATION OF PESTICIDES AND POLYCHLORI- NATED BIPHENYLS (PCBS) - PART 3: CLEAN UP METHODS | |
| FATTY FOOD - QUANTITATIVE DETERMINATION OF PESTICIDES AND POLYCHLORI- NATED BIPHENYLS (PCBS) - PART 4: DETERMINATION, CONFIRMATORY TESTS, MISCELANEOUS | |
| Fertilizers, liming materials and inhibitors - Sampling and sample preparation - Part 3: Sampling of static heaps | |
| Fibres for concrete - Part 2: Polymer fibres - Definition, specifications and conformity | |
| Fire firefighting systems - Water spray systems - Design and installation | |
| Fire resisting doorsets - Requirements and classification | |
| Fire test - Full scale room test for surface products | |
| Fireworks - Part 26: Percussion caps - Specification and test methods | |
| Fireworks - Part 37: Whistlers - Specification and test methods | |
| Fireworks. Part 11: Electrical igniters. Specification and test methods. | |
| Fireworks. Part 14: Flying squib. Specification and test methods | |
| Fireworks. Part 16: Friction-ignited flash bangers. Specification and test methods | |
| Fireworks. Part 30: Shells. Specification and test methods | |
| Fireworks. Part 32: Snaps. Specification and test methods | |
| Fixed firefighting system - Gas extinguishing systems - Part 8: Physical properties and system design of gas extinguishing systems for IG-100 extinguishant | |
| Fixed firefighting systems - Gas extinguishing systems - Part 10: Physical properties and system design of gas extinguishing systems for IG-55 extinguishant | |
| Fixed firefighting systems - Gas extinguishing systems - Part 1: Design, installation and maintenance | |
| Fixed firefighting systems - Gas extinguishing systems - Part 2: Physical properties and system design of gas extinguishing systems for FK-5-1-12 | |
| Fixed firefighting systems - Gas extinguishing systems - Part 3: Physical properties and system design of gas extinguishing systems for HCFC Blend A extinguishant | |
| Fixed firefighting systems - Gas extinguishing systems - Part 4: Physical properties and system design of gas extinguishing systems for HFC 125 extinguishant | |
| Fixed firefighting systems - Gas extinguishing systems - Part 5: Physical properties and system design of gas extinguishing systems for HFC 227ea extinguishant | |
| Fixed firefighting systems - Gas extinguishing systems - Part 6: Physical properties and system design of gas extinguishing systems for HFC 23 extinguishant | |
| Fixed firefighting systems - Gas extinguishing systems - Part 7: Physical properties and system design of gas extinguishing systems for IG-01 extinguishant | |
| Fixed firefighting systems - Gas extinguishing systems - Part 9: Physical properties and system design of gas extinguishing systems for IG-55 extinguishant | |
| Fixed firefighting systems - Water mist systems - Part 13: Test protocol for wet benches and other similar processing equipment for open nozzle systems | |
| Fixed firefighting systems - Water mist systems - Part 17: Test protocol for residential occupancies for automatic nozzle systems | |
| Fixed firefighting systems - Water mist systems - Part 2: Test protocol for shopping areas for automatic nozzle systems | |
| Fixed firefighting systems - Watermist systems - Design and installation | |
| Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to root penetration | |
| Flexible sheets for waterproofing - Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete - Definitions and characteristics | |
| Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of initial amount of mineral surface protection | |
| Food processing machinery - Bread slicers - Part 2: Safety and hygiene requirements for self-service bread slicers | |
| Food processing machinery - Bulk milk coolers on farm - Requirements for performance, safety and hygiene | |
| Food processing machinery - Food depositors - Safety and hygiene requirements | |
| Food processing machinery - Forming machines - Safety and hygiene requirements | |
| Footwear for firefighters | |
| Footwear protecting against chemicals - Part 1: Terminology and test methods | |
| Footwear protecting against chemicals - Part 2: Requirements for limited contact with chemicals | |
| Footwear protecting against chemicals - Part 3: Requirements for footwear highly resistant to chemicals under laboratory conditions. | |
| Footwear protecting against chemicals - Part 3: Requirements for prolonged contact with chemicals | |
| Footwear protecting against chemicals and micro-organisms - Part 4: Footwear protecting against micro-organisms | |
| Free hanging heating and cooling surfaces for water with a temperature below 120 °C - Part 4: Test method for cooling capacity of ceiling mounted radiant panels | |
| Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 1: Technical specifications and requirements | |
| Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 2: Test method for thermal output of ceiling mounted radiant panels | |
| Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 3: Rating method and evaluation of radiant thermal output of ceiling mounted radiant panels | |
| Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 5: Test method for thermal output of open or closed heated ceiling surfaces | |
| Fume cupboards - Part 3: Type test methods | |
| Garden equipment - Electric-powered scissor type grass shears - Mechanical safety | |
| Gas welding equipment - Laboratory measurement of noise emitted by blowpipe for welding, cutting, heating, brazing and soldering - Measurement method | |
| GAS-FIRED CENTRAL HEATING BOILERS - TYPE B BOILERS OF NOMINAL HEAT INPUT EXCEEDING 300 KW, BUT NOT EXCEEDING 1000 KW | |
| Gas-fired central heating boilers - Type C boilers of nominal heat input exceeding 70 kW, but not exceeding 1000 kW | |
| Gas-loaded accumulators for build power applications | |
| Geomembranes - Product Specification | |
| Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or standards (ISO/TS 15530-3:2004) | |
| Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO/TS 12180-1:2003) | |
| Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO/TS 12180-2:2003) | |
| Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO/TS 12781-1:2003) | |
| Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO/TS 12781-2:2003) | |
| Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO/TS 17450-1:2005) | |
| Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO/TS 14253-3:2002) | |
| Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO/TS 12181-1:2003) | |
| Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO/TS 12181-2:2003) | |
| Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO/TS 12780-1:2003) | |
| Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO/TS 12780-2:2003) | |
| Geosynthetic barries- Determination of permeability to liquids | |
| Geosynthetics - Determination of burst strength | |
| Geotextiles and geotextile-related products - Characteristics required for use in pavements and asphalt overlays | |
| Glass in building - Basic alkaline earth silicate glass products - Part 1: Float glass | |
| Glass in building - Basic alkaline earth silicate glass products - Part 2: Product standard | |
| Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity | |
| Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Product standard | |
| Glass in building - Laminated glass and laminated safety glass - Evalutation of conformity | |
| Glass in building - Laminated glass and laminated safety glass - Product standard | |
| Health informatics - A syntax to represent the content of medical classification systems - ClaML | |
| Health informatics - System of concepts to support continuity of care - Part 2: Health care process and workflow | |
| Heated tool welding of thermoplastics mouldings in mass production | |
| Heating systems in buildings - Design of heat pump heating systems | |
| Heating systems in buildings - Energy performance of buildings - Overall energy use, primary energy and CO2 emissions | |
| Heating systems in buildings - Installation and commissioning of water based heating systems | |
| Heating Systems in buildings. Method for calcularion of system energy requirements and system efficiencies | |
| High rise aerial appliances for fire and rescue service use - Turntable ladders with combined movements - Safety and performance requirements and test methods | |
| High rise aerial appliances for fire and rescue service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods | |
| Hose fittings with clamp unit- Part 10: Gauges for cam-locking couplings | |
| Hose fittings with clamp units - Part 7: Cam locking couplings | |
| Hose fittings with clamp units- Part 11: Gauges for symetrical half couplings (Gullemin system) | |
| Hoses fittings with clamp units- Part 9: Gauges for TW tank truck couplings | |
| Hydraulic binder for non-structural applications - Definition, specifications and conformity criteria | |
| IDENTIFICATION CARD SYSTEMS - INTER-SECTOR ELECTRONIC PURSE - PART 2: SECURITY ARCHITECTURE | |
| Identification card systems - Surface transport applications - Interoperable Public Transport Applications - Framework | |
| Identification card systems - Surface transport applications - Part 1: Elementary data types, general code lists and general data elements | |
| Identification card systems - Surface transport applications - Part 2: Transport and travel payment related data elements and code lists | |
| IDENTIFICATION CARD SYSTEMS - SURFACE TRANSPORT APPLICATIONS - PART 2:DESCRIPTION OF CARD RELATED DATA ELEMENTS | |
| IDENTIFICATION CARD SYSTEMS - SURFACE TRANSPORT APPLICATIONS - PART 2:USE OF CARD RELATED DATA ELEMENTS | |
| IDENTIFICATION CARDS SYSTEMS. INTER-SECTOR ELECTRONIC PURSE. PART 1: DEFINITIONS, CONCEPTS AND STRUCTURES | |
| INDUSTRAIL VALVES - VALVES AS PRESSURE ACCESORIES AND SAFETY ACCESORIES - ADDITIONAL REQUIREMENTS | |
| Industrial fans - Safety requirements | |
| Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of migration from factory made cementitious products on the organoleptic parameters | |
| Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementitious products | |
| Influence of cementitious products on water intended for human consumption - Test methods - Part 4: Migration of substances from site-applied cementititous materials and associated non-cementitious products/materials | |
| Influence of organic materials on water intended for human consumption - Determination of odour, flavour, colour and turbidity of water in piping and storage systems | |
| INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - SHIP TO SHORE INTERFACE FOR LIQUEFIED NATURAL GAS | |
| Irrigation techniques - Localised irrigation - Emitting devices, characteristics and test methods | |
| Joint fillers and sealants - Part 2: Specifications for cold applied sealants | |
| Joint fillers and sealants - Part 4: Specifications for primers to be used with joint sealants | |
| Laboratory furniture - Recommendations for design and installation - Part 5: Services distribution carriers | |
| Leather - Leather for automotive - Test methods and testing parameters | |
| Leather. Physical and mechanical test. Determination of soiling | |
| LIFTING BAG SYSTEMS FOR FIRE AND RESCUE SERVICE USE | |
| Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Part 1: Essential characteristics and AVCP | |
| Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Part 2: Terminology, specifications, designation and marking | |
| Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods | |
| Loft ladders - Requirements, marking and testing | |
| LPG equipment and accessories - Equipping of overground and underground LPG vessels | |
| LPG equipment and accessories - Minimum requirements for the content of the user manual for automotive LPG systems | |
| LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG) | |
| LPG equipment and accessories. Inspection and testing of LPG road tankers | |
| Materials and articles in contact with food stuffs - Test method for the resistance to microwave heating of ceramic, glass, glass-ceramic or plastics cookware | |
| Materials and articles in contact with foodstuffs - Certain epoxy derivatives subject to limitation - Determination of BADGE, BFDGE and their hydroxy and chlorinated derivatives in food simulants | |
| Materials and articles in contact with foodstuffs - Certain epoxy derivatives subject to limitation - Determination of NOGE and its hydroxy and chlorinated derivatives | |
| Materials obtained from end of life tyres - Part 1: General definitions related to the methods for determining their dimension(s) and impurities | |
| Measuring method of the energy consumption of gas fired ovens | |
| Mechanical fasteners for gypsum board systems - Definitions, requirements and test methods | |
| Mechanical fasteners for gypsum plasterboard systems - Definitions, requirements and tests methods | |
| MEDICAL DEVICES. RISK ANALYSIS | |
| Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods | |
| METHODS OF MEASURING THE ENERGY CONSUMPTION OF ELECTRIC MAINS OPERATED HOUSEHOLD REFRIGERATORS, FROZEN FOOD STORAGE CABINETS, FOOD FREEZERS AND THEIR COMBINATIONS, TOGETHER WITH ASSOCIATED CHARACTERISTICS | |
| Minimum requirements for remanufactured and compatible user replaceable cartridges to safeguard proper interaction with electro photographic printer systems or multi-functional devices that may contain printer components - Part 1: Monochrome... | |
| Mountaineering equipment - Braking devices - Safety requirements and test methods. | |
| Natural stone test methods - Determination of resistance to ageing by thermal shock | |
| Non-active medical devices - Properties for compresses and wound packing products for medical use - Part 1: Test methods and requirements for absorbent cotton gauze and absorbent cotton and viscose... | |
| Non-active medical devices - Properties for compresses and wound packing products for medical use - Part 2: Test methods for absorbent cotton gauze and absorbent cotton and viscose gauze | |
| Non-active medical devices - Test methods for absorbent cotton gauzes and absorbent cotton and viscose gauzes used in the manufacturing of compresses and wound packing products | |
| Non-destructive testing - Leak testing - Characterization of mass spectrometer leak detectors | |
| Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 3: Power Line Channel Specification | |
| Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 4: IP Communication | |
| Open data communication in building automation, controls and building management. Building network protocol- Part 1: Protocol stack | |
| PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF FORMALDEHYDE IN AN AQUEOUS EXTRACT | |
| Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants | |
| Personal protective equipment - Ergonomic principles - Part 1: General requirements for the design and the specification | |
| Personal protective equipment - Ergonomic principles - Part 3: Biomechanical characteristics | |
| Personal protective equipment - Ergonomic principles - Part 4: Thermal characteristics | |
| Personal protective equipment - Ergonomic principles - Part 6: Sensory factors | |
| Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2017, modified) | |
| Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines (ISO 13847:2013, modified) | |
| Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 1: Middle distillates and lubricating base oils | |
| Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 2: Heavy distillates and residual fuels | |
| Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 4: Light fractions of crude oil | |
| Plastic pipping systems for general purpose buried ducting- Unplasticized poly(vinyl chloride) (PVC-U)- Specifications for pipes, fittings and the system. | |
| Plastics pipes and fittings - Utilisation of thermoplastic materials in a circular economy - Part 1: Vocabulary | |
| Plastics piping system for buried cable ducting- Polypropylene (PP)- Specifications for pipes, fittings and the system. | |
| Plastics piping systems - Buried and above ground piping components for non pressure soil and waste discharge within the building structure - Requirements and test/assessment methods for pipes and fittings... | |
| Plastics piping systems - Buried and above ground piping components for water under pressure - Requirements and test/assessment methods for pipes and fittings | |
| Plastics piping systems - Hot and cold water piping components - Requirements and test/assessment methods for pipes and fittings | |
| Plastics piping systems - Non-pressure drainage and sewerage piping components buried in ground - Requirements and test/assessment methods for pipes and fittings | |
| Plastics piping systems - Non-pressure drainage and sewerage systems buried in ground - Performance characteristics for pipes, fittings and their joints | |
| Plastics piping systems - Piping systems for non-pressure underground drainage and sewerage - Performance requirements for thermoplastics manholes and inspection chambers | |
| Plastics piping systems for buried cable conducting- Unplasticized poly(vinyl chloride) (PVC-U)- Specifications for pipes, fittings and the system | |
| Plastics piping systems for buried cable ducting- Polyethylene (PE)- Specifications for pipes, fittings and the system. | |
| Plastics Piping Systems For Drainage And Sewerage - Glass-Reinforced Thermosetting Plastics (GRP) Based On Polyester Resin (UP) - Manholes And Inspection Chambers | |
| Plastics piping systems for general purpose buried ducting- Polypropylene (PP)- Specifications for pipes, fittings and the system | |
| Plastics piping systems for non-pressure drainage and sewerage - Polyester resin concrete (PRC) - Part 2: Manholes and inspection chambers | |
| Plastics piping systems for non-pressure underground drains and sewers - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the systems | |
| PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE. ACRYLONITRILE-BUTADI ENE-STYRENE (ABS). PART 6: RECOMMENDED PRACTICE FOR INSTALLATION | |
| PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE. POLYETHYLENE (PE). PART 6: RECOMMENDED PRACTICE FOR INSTALLATION. | |
| PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE. POLYPROPYLENE (PP). PART 6: RECOMMENDED PRACATICE FOR INSTALLATION | |
| PLASTICS PIPING SYSTEMS FOR UNDERGROUND DRAINAGE AND SEWERAGE UNDER PRESSURE. UNPLASTICIZED POLY(VINYL CHORIDE) (PVC-U). PART 7: ASSESSMENT OF CONFORMITY. | |
| Plastics piping systems. Buried and above ground piping components for water and other liquids under pressure. Requirements and test/assessment methods for pipes and fittings | |
| Plastics piping systems. Hot and cold water piping components. Requirements and test/assessment methods for pipes and fittings | |
| Plastics piping systems. Non pressure soil and waste discharge piping components within the building structure. Requirements and test/assessment methods for pipes and fittings. | |
| Plastics piping systems. Non-pressure drainage and sewerage piping components buried in ground. Requirements and test/assessment methods for pipes and fittings | |
| Plastics pipping systems for general purpose buried ductings- Polyethylene (PE)- Specifications for pipes, fittings and the system. | |
| Precast concrete products - Beam-and-block floor systems - Part 2: Blocks | |
| Precast concrete products - Classification of glassfibre reinforced concrete performances | |
| PRECAST CONCRETE PRODUCTS - FLOOR PLATES FOR FLOOR SYSTEMS - PART 1: COMMON REQUIREMENTS | |
| PRECAST CONCRETE PRODUCTS - FLOOR PLATES FOR FLOOR SYSTEMS. PART 2: SPECIFIC REQUIREMENTS FOR REINFORCED FLOOR PLATES | |
| PRECAST CONCRETE PRODUCTS - FLOOR PLATES FOR FLOOR SYSTEMS. PART 3: SPECIFIC REQUIREMENTS FOR PRESTRESSED FLOOR PLATES | |
| Precast concrete products - Precast concrete elements for vehicle restraint systems | |
| Precast Concrete Products - Precast Concrete Garages - Part 2: Steel fibre concrete garages - Product properties and performances | |
| Precast concrete products - Road traffic noise reducing devices and barriers - Requirements and test methods. | |
| Precast lightweight concrete products with an open structure | |
| Prefabricated accessories for roofing - Part 1: Continuous plastic rooflights - Product specification and test methods | |
| Products and systems for the protection and repair of concrete - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding | |
| Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and AVCP - Part 3: Repair concrete and mortars | |
| Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and AVCP - Part 7: Reinforcement corrosion protection | |
| Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of carbonations depth in hardened concrete by the phenolphthalein method | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of chloride content in hardened concrete | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep under sustained tensile load for synthetic resin products (PC) for the anchoring... | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of fatigue under dynamic loading - Part 2: in service | |
| Protective clothing for firefighters - Requirements and test methods for fire hoods for firefighters | |
| Railway applications – Wheelsets and bogies – Running gear structural requirements | |
| Railway applications - Aerodynamics - Part 5: Requirements and test procedures for aerodynamics in tunnels | |
| Railway applications - Bodyside Entrance Systems for rolling stock | |
| Railway applications - Brake indicators - Part 2: Electrical operation brake indicators | |
| Railway applications - Braking - Brake block holder and brake shoe key for railway vehicles | |
| Railway applications - Braking - Brake pads | |
| Railway applications - Gauges - Part 1: Generic explanations and methods of gauging | |
| Railway Applications - Gauges - Part 2: Rolling stock | |
| Railway applications - Gauges - Part 3: Infrastructure gauge | |
| Railway Applications - Gauges - Part 4: Catalogue of gauges and associated rules | |
| Railway applications - Infrastructure - Flash butt welding of rails - Part 3: Welding in association with crossing construction | |
| Railway applications - Infrastructure - Railbound construction and maintenance machines - Part 1: Technical requirements for running | |
| Railway applications - Infrastructure - Railbound construction and maintenance machines - Part 2: Technical requirements for travelling and working | |
| Railway applications - Infrastructure - Railbound construction and maintenance machines - Part 3: General safety requirements | |
| Railway applications - Testing and simulation for the acceptance of running characteristics of railway vehicles operated on the heavy rail network - Part 2: Safety against derailment on twisted track... | |
| Railway applications - Testing and simulation for the acceptance of running characteristics of railway vehicles operated on the heavy rail network - Part 3: Stationary tests not obligatory on a... | |
| Railway applications - Testing and simulation for the acceptance of running characteristics of railway vehicles operated on the heavy rail network - Part 4: On-track testing | |
| Railway applications - Testing and simulation for the acceptance of running characteristics of railway vehicles operated on the heavy rail network - Part 5: Calculations/Simulat ions | |
| Railway applications - Testing and simulation for the assessment of running characteristics of railway vehicles operated on the heavy rail network - Part 1: General | |
| Railway applications - Track - Track alignment design parameters - Track gauges 1435 mm and wider - Part 1: Plain line | |
| Railway applications - Track - Track geometry quality - Part 6: Characterization of track geometry quality | |
| Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval procedure - Part 2: Cast wheels | |
| Railway applications. Track. Flash butt welding of rails. Part 1: New 220 and 260 Grade Rails in a fixed plant | |
| Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles | |
| Refuse collection vehicles - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles | |
| Refuse collection vehicles - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles | |
| Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles | |
| Resilient, textile and laminate floor coverings - Evaluation and requirements of volatile organic compounds (VOC) emissions | |
| Resilient, textile and laminate floor coverings. Essential characteristics | |
| Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing and marking | |
| Respiratory protective devices - Gas cylinder valves - Part 4: Excess flow devices | |
| Respiratory protective devices - Self-contained closed-circuit breathing apparatus for escape - Requirements, testing and marking | |
| Respiratory protective devices - Self-contained closed-circuit devices for escape - Requirements, testing and marking | |
| Road marking materials - Drops on materials - Glass beads, antiskid aggregates and mixtures of the two | |
| Road marking materials - Part 3: Active road studs: performance requirements | |
| Road marking materials - Part 3: Active road studs | |
| ROAD MARKING MATERIALS - ROAD MARKING PERFORMANCE FOR ROAD USERS | |
| Road traffic noise reducing devices - Characteristics | |
| Road traffic noise reducing devices - Specifications | |
| Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks | |
| Rough-terrain trucks - Safety requirements and verification - Part 5: Attachments and attachment interface | |
| Rough-terrain trucks - Safety requirements and verification - Part 7: Electrification | |
| Rough-terrain trucks - Safety requirements and verification - Part 7: Test method and determination of noise emission | |
| Safety of children's clothing - Cords and drawstrings on children's clothing - Specifications | |
| Safety of machinery - Ergonomic design principles for the operability of mobile machinery | |
| Safety of Machinery - Safety requirements for cold flat rolling mills | |
| Safety of Machinery - Safety requirements for hot flat rolling mills | |
| Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel | |
| Safety requirements for cableway installations designed to carry persons - Carriers - Part 1: Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers | |
| Safety requirements for coated abrasive products | |
| Sampling of the precious metal alloys in jewellery and associated products. | |
| Screed material and floor screeds - Screed material - Properties and requirements | |
| Sectional specification: Fixed low power film resistors | |
| Sectional specification: Fixed low power surface mount (SMD) resistors | |
| SECTIONAL SPECIFICATION: FIXED LOW POWER SURFACE MOUNTING (SMD) RESISTORS. | |
| Self-supporting double skin metal faced insulating panels - Factory made products - Specifications - Part 1: Self supporting applications | |
| Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements | |
| SIZE DESIGNATION OF CLOTHES - PRIMARY AND SECONDARY DIMENSIONS IN GARMENTS | |
| Slow release appliances fired by solid fuel - Requirements and test methods | |
| Slurry surfacing - Factory production control | |
| Smoke alarm devices | |
| Solid hardwood panelling and cladding - Machined profiles | |
| Solid softwood panelling and cladding - Machined profiles with tongue and groove | |
| Solid softwood panelling and cladding - Machined profiles without tongue and groove | |
| Space engineering - Ground systems and operations - Part 1: Principles and requirements | |
| Space engineering - Ground systems and operations - Part 2: Documents requirements definitions (DRDs) | |
| Space engineering - Mechanical - Part 1: Thermal control | |
| Space engineering - Mechanical - Part 2: Structural | |
| Space engineering - Mechanical - Part 3: Mechanisms | |
| Space engineering - Mechanical - Part 5-1: Liquid and electric propulsion for spacecraft | |
| Space engineering - Mechanical - Part 6: Pyrotechnics | |
| Space engineering - Mechanical - Part 8: Materials | |
| Space engineering - Mechnical - Part 7: Mechnical parts | |
| Space engineering - Space environment | |
| Space engineering - Testing | |
| Space engineering standards - Fracture control | |
| Space engineering standards - Functional analysis | |
| Space product assurance - Determination of the susceptibility of silver plated copper wire and cable to "red-plague" corrosion | |
| Space product assurance - Flammability testing for the screening of space materials | |
| Space product assurance - Hazard analysis | |
| Space product assurance - Quality assurance for test centres | |
| Space product assurance - Thermal vacuum outgassing test for the screening of space materials | |
| Space product assurance - Verification and approval of automatic machine wave soldering | |
| Space project management - Organization and conduct of reviews | |
| Specification for landing valves for dry riser and other dry main systems for fire fightings in buildings | |
| Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above | |
| Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods | |
| Stone shields for off-road motorcycling suited to protect riders against stones and debris - Requirements and test methods | |
| Stretched ceilings - Requirements and test methods | |
| Surface active agents - Determination of the active matter content of alkylamidopropylbeta ines aand alkylbetaines | |
| Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3 | |
| Surfaces for indoor sports areas - Determination or rotational friction | |
| Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification | |
| Surfaces for sports areas - Multi-sports floor systems for indoor use - Part 1: Essential characteristics | |
| Surfaces for sports areas - Multi-sports floor systems for indoor use - Part 2: Specifications | |
| Surfaces for sports areas - Multi-sports floor systems for indoor use - Part 3: In-situ testing | |
| Surfaces for sports areas - Synthetic turf sports surfaces - Part 6: Specification for synthetic turf carpets | |
| Sweepers. Part 2: Performance requirements and test methods | |
| Tanks for transport of dangerous goods - Digital interface for product recognition devices for liquid fuels | |
| Tanks for transport of dangerous goods - Terminology | |
| Temporary structure - Tents - Safety | |
| Testing sprayed concrete - Part 5: Determination of energy absorption capacity of fibre reinforced slab specimens | |
| Testing sprayed concrete. Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens. | |
| Testing sprayed concrete. Part 7: Fibre content of fibre reinforced concrete. | |
| Textile floor coverings - Assessment of changes in appearance | |
| Textile floor coverings - Classification of machine-made pile rugs and runners | |
| Textile floor coverings - Minimum requirements for carpet underlays | |
| Textiles - Laundry processed textiles - Biocontamination control system | |
| The design, preparation and application of external rendering and internal plastering. Part 1: External rendering | |
| Thermal insulating products for building equipment and industrial installations. In-situ formed sprayed rigid polyurethane foam (PUR) products. Part 2: Specification for the installed products | |
| Thermal insulating products for building. In-situ formed dispensed rigid polyurethane foam (PUR) products. Part 2: Specification for the installed insulation products | |
| Thermal insulating products for buildings - In-situ formed urea-formaldehyde foam (UF) products - Part 1: Specification for the foam system before installation | |
| Thermal insulating products for buildings - In-situ formed urea-formaldehyde foam (UF) products - Part 2: Specification for the installed insulation products | |
| Thermal insulating products for buildings. In-situ thermal insulation formed from expanded perlite (EP) products. Part 2: Specification for the installed products. | |
| Thermal insulation products for building equipment and industrial installations. In-situ formed dispensed rigid polyurethane foam (PUR) products. Part 2: Specefication for the installed insulation products | |
| Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 1: Specification for the loose-fill products before installation | |
| Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 2: Specification for the installed products | |
| Thermal insulation products for buildings - In-situ formed loose-fill cellulose products - Part 1: Specification for the products before installation | |
| Thermal insulation products for buildings - In-situ formed loose-fill cellulose products - Part 2: Specification for the installed products | |
| Thermal insulation products for buildings. In-situ formed expanded clay lightweight aggregate products. Part 2: Specification for the installed products | |
| Thermal insulation products for buildings. In-situ formed loose-fill mineral wool products. Part 2: Specification for the installed products | |
| Thermal insulation products for buildings. In-situ formed loose-fill mineral wool produts. Part 1: Specification for the loose-fill products before installation | |
| Thermal insulation products for buildings. In-situ formed sprayed rigid polyurethane foam (PUR) products. Part 2: Specefication for the installed products | |
| Thermal insulation products for buildings. In-situ thermal insulation formed from exfoliated vermiculite (EV) products. Part 2: Specefication for the installed products | |
| Timber structures - Glued laminated timber and glued laminated solid timber - Requirements | |
| Timber structures - Laminated veneer lumber (LVL) - Requirements | |
| Timber structures - Prefabricated wall, floor and roof elements - Part 2: Performance requirements and minimum productions requirements | |
| Timber structures - Prefabricated wall, floor and roof elements - Requirements | |
| Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements | |
| Timber structures - Strength graded structural timber with rectangular cross section - Part 4: Machine grading - Grading machine settings for machine controlled systems | |
| Timber structures - Structural timber with round cross-section - Requirements | |
| Timber structures. Connectors. Requirements. | |
| Timber structures. Fasteners. Requirements. | |
| Timber structures. Strength graded structural timber with round cross-section. Requirements. | |
| Transportable gas cylinders - Specification for the design and construction of refillable seamless aluminium or aluminium alloy gas cylinders for portable carbon dioxide fire extinguishers of water capacities from 0,5... | |
| Transportable gas cylinders - Specification for the design and construction of refillable seamless steel cylinders for portable fire extinguishers and bottles for breathing apparatus of water capacities from 0,5 litre... | |
| TRANSPORTABLE GAS CYLINDERS. IDENTIFICATION AND MARKING USING RADIO FREQUENCY IDENTIFICATION TECHNOLOGY. PART 1: REFERENCE ARCHITECTURE AND TERMINOLOGY | |
| Transportable refillable brazed steel cylinders for liquified petroleum gas (LPG). Periodic requalification | |
| Transportable wall saw and wire saw equipment for job site - Safety | |
| Ultrasonic domestic gas meters | |
| Ultrasonic welding of moulded parts and semi-finished parts of thermoplastic polymers in the mass production. Machines and equipment. Function description and requirements | |
| Vehicle lifts | |
| Ventilation for buildings. Sheet metal air ducts with rectangular section. Requirements for strength and leakage | |
| Ventilation in buildings - Chilled beams - Testing and rating of active chilled beams | |
| Vertical formwork - Part 1: Performance requirements, general design and assessment | |
| Water meters within the scope of Directives 75/33/EEC and 79/830/EEC, equipped with electronic totalizing devices. Part 1: General requirements. | |
| Water meters within the scope of Directives 75/33/EEC and 79/830/EEC, equipped with electronic totalizing devices. Part 2: Pattern approval tests. | |
| Water quality. Guidance on quality assurance aspects of aquatic macrophytes surveying and analysis in running waters. | |
| WC flushing cisterns | |
| Welding consumables - Test methods and quality requirements - Part 1: Primary methods and assessment of consumables for steel, nickel and nickel alloys | |
| Welding of thermoplastics. Machines and equipment for welding of thermoplastics by heated element | |
| Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets | |
| Windows and doors - Product standard, performance characteristics - Part 2: Internal pedestrian doorsets without resistance to fire and/or smoke leakage characteristics | |
| Windows and external pedestrian doors - Product standard | |
| Winter and road service area maintenance equipment - Solid absorbents intended for road usage | |
| Winter and road service area maintenance equipments - Data acquisition and transmission - Part 1: In vehicle data acquisition | |
| Winter and road service area maintenance equipments - Front-mounted equipments - Interchangeability | |
| Winter and road service area maintenance equipments - Front-mounted equipments - Part 2: Interchangeability on lifting systems | |
| Winter and road service area maintenance equipments - Part 2: Protocol for data transfer between information supplier server and client application server | |
| Winter and road service area maintenance equipments - Power system and related controls - Interchangeability and performance requirements | |
| Wood and wood-based materials in stair components - Requirements | |
| Wood poles for overhead lines - Requirements | |
| Wood-based panels - Floating floors - Part 1: Performance specifications and requirements | |
| WOOD-BASED PANELS - FLOATING FLOORS - PART 2: TEST METHODS | |
| Wood-based panels - Wood veneer floor coverings |
| << Prev | Next >> |