AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| Adaptors for fibre optic connectors -- Part 1-1: Blank detail specification | |
| Adaptors for fibre optic connectors -- Part 1: Generic specification | |
| Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods | |
| Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional | |
| Adjustable speed electrical power drive systems - Part 7-1: Generic interface and use of profiles for power drive systems - Interface definition | |
| Adjustable speed electrical power drive systems - Part 7-201: Generic interface and use of profiles for power drive systems - Profile type 1 specification | |
| Adjustable speed electrical power drive systems - Part 7-301: Generic interface and use of profiles for power drive systems - Mapping of profile type 1 to network technologies | |
| Adjustable speed electrical power drive systems -- Part 5-1: Safety requirements - Electrical, thermal and energy | |
| Aerospace series - Blind bolt, 100° flush head, high strength | |
| Aerospace series - Blind bolt, 100° reduced flush head, high strength | |
| Aerospace series - Blind bolt, 130° flush head, high strength | |
| Aerospace series - Blind bolt, protruding head, high strength, pulltype | |
| Aerospace series - Specification for lubrication of fasteners with cetyl alcohol | |
| Application integration at electric utilities - System interfaces for distribution management - Part 11: Common information model (CIM) extensions for distribution | |
| Application integration at electric utilities - System interfaces for distribution management - Part 13: CIM RDF Model exchange format for distribution | |
| Application integration at electric utilities - System interfaces for distribution management - Part 3: Interface for network operations | |
| Application integration at electric utilities - System interfaces for distribution management - Part 4: Interfaces for records and asset management | |
| Attachment materials for electronic assembly - Part 1-2: Requirements for soldering pastes for high-quality interconnects in electronics assembly | |
| Attachment materials for electronic assembly - Part 1-3: Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications | |
| Audio and audiovisual equipment - Digital audio part - Basic measurement methods of audio characteristics -- Part 1: General | |
| Audio and audiovisual equipment - Digital audio part - Basic measurement methods of audio characteristics -- Part 2: Consumer use | |
| Audio and audiovisual equipment - Digital audio parts - Basic measurement methods of audio characteristics - Part 3: Professional use | |
| Audio and audiovisual equipment - Digital audio parts - Basic measurement methods of audio characteristics -- Part 4: Personal computer | |
| BASIC SPECIFICATION FOR OPTICAL FIBRE AMPLIFIER TEST METHODS. PART 3: TEST METHODS FOR NOISE FIGURE PARAMETERS | |
| BASIC SPECIFICATION FOR OPTICAL FIBRE AMPLIFIER TEST METHODS. PART 5-1: TEST METHODS FOR REFLECTANCE NOISE FIGURE PARAMETERS | |
| Basic test and measurement procedures - Part 2-22: Tests - Change of temperature | |
| Batch control -- Part 2: Data structures and guidelines for languages | |
| Batch control- Part 3: General and site recipe models and representation | |
| CABLES FOR PORTABLE EARTHING AND SHORT-CIRCUITING EQUIPMENT. | |
| Calibration of fibre optic chromatic dispersion test sets | |
| Calibration of fibre-optic power meters | |
| Calibration of optical spectrum analyzers | |
| Calibration of optical time-domain reflectometers (OTDRS) | |
| Coaxial communication cables - Part 1-101: Electrical test methods - Test for conductor DC resistance of cable | |
| Coaxial communication cables - Part 1-102: Electrical test methods - Test for insulation resistance of cable dielectric | |
| Coaxial communication cables - Part 1-104: Electrical test methods - Test for capacitance stability of cable | |
| Coaxial communication cables - Part 1-105: Electrical test methods - Test for withstand voltage of cable dielectric | |
| Coaxial communication cables - Part 1-107: Electrical test methods - Test for cable microphony charge level (mechanically induced noise) | |
| Coaxial communication cables - Part 1-108: Electrical test methods - Test for characteristic impedance, phase and group delay, electrical length and propagation velocity | |
| Coaxial communication cables - Part 1-111: Electrical test methods - Test for stability of phase constant | |
| Coaxial communication cables - Part 1-206: Environmental test methods - Climatic sequence | |
| Coaxial communication cables - Part 1-301: Mechanical test methods - Test for ovality | |
| Coaxial communication cables - Part 1-308: Mechanical test methods - Test for tensile strength and elongation for copper-clad metals | |
| Coaxial communication cables - Part 1-310: Mechanical test methods - Test for torsion characteristics of copper-clad metals | |
| Coaxial communication cables - Part 1-316: Mechanical test methods - Test for maximum pulling force of cable | |
| Coaxial communication cables - Part 1: Generic specificatioin - General, definitions and requierements | |
| Coaxial communication cables -- Part 1-103: Electrical test methods - Test for capacitance of cable | |
| Communication networks and systems for power utility automation - Part 7-420: Basic communication structure - Distributed energy resources logical nodes | |
| Communication networks and systems in substations - Part 10: Conformance testing | |
| Communication networks and systems in substations - Part 5: Communication requirements for functions and device models | |
| Communication networks and systems in substations -- Part 6: Configuration description language for communication in electrical substations related to IEDs | |
| Communication networks and systems in substations -- Part 7-1: Basic communication structure for substation and feeder equipment - Principles and models | |
| Communication networks and systems in substations -- Part 7-3: Basic communication structure for substations and feeder equipment - Common data classes | |
| Communication networks and systems in substations -- Part 7-4: Basic communication structure for substations and feeder equipment - Compatible logical node and data object addressing | |
| Communication networks and systems in substations -- Part 8-1: Specific communication service mapping (SCSM) - Mappings to MMS (ISO/IEC 9506 Part 1 and Part 2) and to ISO/IEC 8802-3 | |
| Communication networks and systems in substations -- Part 9-1: Specific Communication Service Mapping (SCSM) - Sampled values over serial unidirectional multidrop point to point link | |
| Communication networks and systems in substations -- Part 9-2: Specific communication service mapping (SCSM) - Sampled values over ISO/IEC 8802-3 | |
| Connectors for electronic equipment - Part 4-114: Printed board connectors - Detail specification for two-part connector with integrated shielding function having a grid of 1 mm x 1,5 mm | |
| Connectors for electronic equipment - Product requirements -- Part 3-114: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to... | |
| Connectors for electronic equipment - Product requirements -- Part 3-115: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to... | |
| Connectors for electronic equipment - Product requirements -- Part 3-116: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to... | |
| Connectors for electronic equipment - Quality assessment requirements -- Part 1: Generic specification | |
| Connectors for electronic equipment - Sectional specification -- Part 6: Loose part contacts for electrical connectors | |
| Connectors for electronic equipment -- Part 3-106: Rectangular connectors: Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the... | |
| Connectors for electronic equipment -- Part 3-112: Rectangular connectors - Detail specification for rectangular connectors with four contacts for high performance serial bus for consumer audio/video equipment (IEC 61076-3-112:2006) | |
| Connectors for electronic equipment -- Part 4-108: Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function,... | |
| Connectors for electronic equipment -- Part 4-110: Printed board connectors with assessed quality - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full... | |
| Connectors for electronic equipment -- Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment | |
| Connectors for electronic equipment -- Part 7-001: Cable outlet accessories - Blank detail specification | |
| Connectors for electronic equipment- Product requirements- Part 3-110: Detail specification for shielded, free and fixed connectors for data transmission with frequencies up to 1000 MHz | |
| Consumer audio/video equipment - Digital interface - Part 6: Audio and music data transmission protocol | |
| Consumer audio/video equipment - Digital interface - Part 8: Transmission of ITU-R BT.601 style digital video data | |
| Consumer audio/video equipment - Digital interface -- Part 1: General | |
| Consumer audio/video equipment - Digital interface -- Part 2: SD-DVCR data transmission | |
| Consumer audio/video equipment - Digital interface -- Part 3: HD-DVCR data transmission | |
| Consumer audio/video equipment - Digital interface -- Part 4: MPEG2-TS data transmission | |
| Consumer audio/video equipment - Digital interface -- Part 5: SDL-DVCR data transmission | |
| Consumer audio/video equipment - Digital interface -- Part 6: Audio and music data transmission protocol | |
| Consumer audio/video equipment - Digital interface -- Part 7: Transmission of Rec. ITU-R BO.1294 system B | |
| Consumer audio/video equipment digital interface with plastic optical fibre | |
| Convertor transformers -- Part 3: Application guide | |
| Cores made of soft magnetic materials - Measuring methods - Part 1: Generic specification | |
| Cores made of soft magnetic materials - Measuring methods - Part 2: Magnetic properties at low excitation level | |
| Delay and power calculation standards - Part 1: Integrated circuit delay and power calculation systems | |
| Delay and power calculation standards -- Part 2: Pre-layout delay calculation specification for CMOS ASIC libraries | |
| Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 2: Burst-info | |
| Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 3: Non-linear PCM bitstreams according to the AC-3 and enhanced AC-3 formats | |
| Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 9: Non-linear PCM bitstreams according to the MAT format | |
| Digital Audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 -- Part 6: Non-linear PCM bitstreams according to the MPEG-2 AAC and MPEG-4 AAC audio formats (IEC... | |
| Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 -- Part 7: Non-linear PCM bitstreams according to the ATRAC, ATRAC2/3 and ATRAC-X formats | |
| Digital data communication for measurement and control - Fieldbus for use in industrial control systems -- Part 2: Physical Layer specification | |
| Digital data communication for measurement and control - Fieldbus for use in industrial control systems -- Part 3: Data Link Layer service definition | |
| Digital data communication for measurement and control - Fieldbus for use in industrial control systems -- Part 4: Data Link Layer protocol specification | |
| Digital data communication for measurement and control - Fieldbus for use in industrial control systems -- Part 5: Application Layer service definition | |
| Digital data communication for measurement and control - Fieldbus for use in industrial control systems -- Part 6: Application Layer protocol specification | |
| Digital data communication for measurement and control -- Part 2: Additional profiles for ISO/IEC 8802-3 based communication networks in real-time applications | |
| Digital data communication for measurement and control- Fieldbus for use in industrial control systems- Part 5-2: Application Layer service definition. 2 type elements | |
| Digital data communication for measurement and control- Fieldbus for use in industrial control systems- Part 600: Application Layer protocol specification | |
| Digital data communications for measurement and control -- Part 1: Profile sets for continuous and discrete manufacturing relative to fieldbus use in industrial control systems | |
| Digital radio mondiale (DRM) - Part 2: Digital radio in the bands below 30 MHz - Methods of measurement for DRM transmitters | |
| DTV profiles for uncompressed digital video interfaces | |
| Electrical accessories for household and similar uses - Electromagnetic compatibility (EMC) | |
| Electrical apparatus for explosive gas atmospheres - Electrical resistance trace heating -- Part 1: General and testing requirements | |
| Electrical installation for lighting and beaconing of aerodromes - Constant current series circuits for aeronautical ground lighting - System design and installation requirements | |
| Electricity metering data exchange - The DLMS/COSEM suite - Part 8-5: Narrow-band OFDM G3-PLC communication profile for neighbourhood networks | |
| ELECTRICITY METERING. DATA EXCHANGE FOR METER READING, TARIFF AND LOAD CONTROL. PART 31: USING LOCAL AREA NETWORKS TYPE 1 | |
| Electromechanical elementary relays of assessed quality - Part 11: Blank detail specification - Relays for industrial application | |
| ELECTRONIC COMPONENTS - RELIABILITY - REFERENCE CONDITIONS FOR FAILURE RATES AND STRESS MODELS FOR CONVERSION. | |
| End-face image analysis procedure for the calibration of optical fibre geometry test sets | |
| Energy management application program interface (EMS - API) - - Part 301: Common information model (CIM) base | |
| Energy management system application program interface (EMS-API) - Part 452: CIM static transmission network model profiles | |
| Energy management system application program interface (EMS-API) - Part 453: CIM based graphics exchange | |
| Energy management system application program interface (EMS-API) -- Part 1: Guidelines and general requirements | |
| Energy management system application program interface (EMS-API) -- Part 2: Glossary | |
| Energy management system application program interface (EMS-API) -- Part 301: Common information model (CIM) base | |
| Energy management system application program interface (EMS-API) -- Part 401: Component interface specification (CIS) framework | |
| Energy management system application program interface (EMS-API) -- Part 402: Common services | |
| Energy management system application program interface (EMS-API) -- Part 403: Generic data access | |
| Energy management system application program interface (EMS-API) -- Part 404: High Speed Data Access (HSDA) | |
| Energy management system application program interface (EMS-API) -- Part 405: Generic Eventing and Subscription (GES) | |
| Energy management system application program interface (EMS-API) -- Part 407: Time Series Data Access (TSDA). | |
| Energy management system application program interface (EMS-API) -- Part 501: Common Information Model Resource Description Framework (CIM RDF) schema (IEC 61970-501:2006) | |
| Enterprise-control system integration - Part 1: Models and terminology | |
| Enterprise-control system integration - Part 2: Object model attributes | |
| Enterprise-control system integration - Part 3: Activity models of manufacturing operations management | |
| Environmental and endurance testing - Environmental and endurance test methods for FBGA, BGA, FLGA, LGA, SON and QFN package on mounting condition | |
| Evaluation and routine testing in medical imaging departments - Part 3-6: Acceptance tests - Image display devices | |
| Exposure to electric or magnetic fields in the low and intermediate frequency range - Methods for calculating the current density and internal electric field induced in the human body --... | |
| Ferrite cores - Dimensions - Part 13: PQ-cores for use in power supply applications | |
| Ferrite cores - Dimensions - Part 14: EFD-cores for use in power supply applications | |
| Ferrite cores - Dimensions - Part 1: General specification | |
| Ferrite cores - Dimensions - Part 9: Planar cores | |
| Fibre optic active components and devices - Package and interface standards - Part 15: Discrete vertical cavity surface emitting laser packages | |
| Fibre optic active components and devices - Package and interface standards - Part 4: PN 1x9 plastic optical fibre transceivers | |
| Fibre optic active components and devices - Package and interface standards -- part 11: 14-pin modulator- integrated laser diode transmitter | |
| Fibre optic active components and devices - Package and interface standards -- Part 12: Laser transmitter with a coaxial RF connector | |
| Fibre optic active components and devices - Package and interface standards -- Part 2: SFF MT-RJ 10-pin transceiver | |
| Fibre optic active components and devices - Package and interface standards -- Part 7: SFF LC 10-pin transceiver | |
| Fibre optic active components and devices - Package and interface standards -- Part 8: SFF LC 20-pin transceiver | |
| Fibre optic active components and devices - Package and interface standards -- Part 9: SFF MU duplex 10-pin transceiver | |
| Fibre optic active components and devices - Performance standards - Part 2: 850 nm discrete vertical cavity surface emitting laser devices | |
| Fibre optic active components and devices - Performance standards - Part 3: 2,5 Gbit/s modulator-integrated laser diode transmitters | |
| Fibre optic active components and devices - Performance standards - Part 6: 650-nm 250-Mbit/s plastic optical fibre transceivers | |
| Fibre optic active components and devices - Performance standards -- Part 5: ATM-PON transceivers with LD driver | |
| Fibre optic active components and devices - Tests and measurement prodedures - Part 1: general and guidance | |
| Fibre optic active components and devices: Package and interface standards -- Part 10: SFF MU duplex 20-pin transceiver | |
| Fibre optic active components and devices: Package and interface standards -- Part 5: SC 1 x 9 fibre optic module | |
| Fibre optic active components and devices: Test and measurement procedures -- Part 2: ATM-PON transceivers | |
| Fibre optic active components and devies - Package and interface standards -- Part 3: SFF MT-RJ 20-pin transceiver | |
| FIBRE OPTIC CIRCULATORS -- PART 1: GENERIC SPECIFICATION | |
| Fibre optic communication subsystem basic test procedures -- Part 1-4: Test procedures for general communication subsystems - Collection and reduction of two-dimensional nearfiled data for multimode fibre laser transmitters | |
| Fibre optic communication subsystem basic test procedures -- Part 2-9: Test procedures for digital systems - Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems | |
| FIBRE OPTIC COMMUNICATION SUBSYSTEM BASIC TEST PROCEDURES. PART 3-2: TEST PROCEDURES FOR ANALOGUE SYSTEMS. CARRIER-TO-NOISE RATIO MEASUREMENTS FOR VIDEO SYSTEMS | |
| Fibre optic communication subsystem test procedures - Digital systems - Part 2-8: Determination of low BER using Q-factor measurements | |
| Fibre optic communication subsystem test procedures - Digital systems -- Part 2-2: Optical eye pattern waveform, and extinction ratio measurement | |
| Fibre optic communication subsystem test procedures - Part 4-4: Cable plants and links - Polarization mode dispersion measurement for installed links | |
| Fibre optic communication subsystem test procedures -- Part 2-10: Digital systems - Time-resolved chirp and alpha-factor measurement of laser transmitters | |
| Fibre optic communication subsystem test procedures -- Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement | |
| Fibre optic components and devices - Performance standards -- Part 4: 1 300.nm transceivers for Gigabit Ethernet application | |
| Fibre optic connector interfaces - Part 21: Type SMI connector family for plastic optical fibre | |
| Fibre optic connector interfaces - Part 4-1: Type SC connector family - Simplified receptacle SC-PC connector interfaces | |
| Fibre optic connector interfaces - Part 6-1: Type MU connector family - Simplified receptacle MU-PC connector interfaces | |
| Fibre optic connector interfaces - Part 7: Type MPO connector family | |
| Fibre optic connector interfaces -- Part 20: Type LC connector family | |
| Fibre optic connector interfaces -- Part 22: Type F-SMA connector family | |
| Fibre optic connector interfaces -- Part 23: Type LX.5 connector family | |
| Fibre optic connector interfaces -- Part 25: Type RAO connector family | |
| FIBRE OPTIC CONNECTOR INTERFACES. PART 8: TYPE CF08 CONNECTOR FAMILY. | |
| Fibre optic connector optical interfaces - Part 2-1: Optical interface standard single mode non-angled physically contacting fibres | |
| Fibre optic connector optical interfaces - Part 2-2: Optical interface standard single mode angled physically contacting fibres | |
| Fibre optic connector optical interfaces - Part 3-1: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia PC ferrule, single mode fibre | |
| Fibre optic connector optical interfaces - Part 3-2: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres | |
| Fibre optic connector optical interfaces - Part 3-3: Optical interface angled PC endface rectangular ferrule, single mode fibre | |
| Fibre optic connector optical interfaces - Part 3-4: Optical interface flat PC endface rectangular ferrule, single mode fibre | |
| Fibre optic connector optical interfaces -- Part 3-5: Optical Interface - 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre... | |
| Fibre optic connector optical interfaces -- Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single... | |
| Fibre optic connector optical interfaces -- Part 3-7: Optical Interface, 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using Titanium as fibre surrounding material, single mode fibre | |
| Fibre optic enclosures -- Part 1: Generic specification | |
| FIBRE OPTIC FAN- OUTS-- PART 1: GENERIC SPECIFICATION | |
| Fibre optic fan-outs -- Part 1-1: Blank detail specification | |
| Fibre optic interconnecting devices and passive component performance standard -- Part 021-2: Fibre optic connectors terminated on single-mode fibre for category C - Controlled environment | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state) | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-48: Tests - Temperature-humidity cycling | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-55: Tests - Strength of mounted adaptor | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-26: Tests - Salt mist | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-49: Tests - Connector installation test | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-51: Tests - Fibre optic connector test for transmission with applied tensile load - Singlemode... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-2: Examinations and measurements - Polarization dependent loss in a single-mode fibre optic device | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-3: Examinations and measurements - Active monitoring of changes in attenuation and return loss | |
| Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-10: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Non-angled, ferrule-less, bore alignment connectors... | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7: Type MPO connector family | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces -- Part 15: Type LSH connector family | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces -- Part 24-11: Type SC-RJ connectors with protective housings based on IEC 61076-3-117 | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces -- Part 24-21: Type SC-RJ connectors with protective housings based on IEC 61076-3-106, variant 06 | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces -- Part 3-8: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-APC composite ferrule... | |
| Fibre optic interconnecting devices and passive components - Fibre optic isolators - Part 1: Generic specification | |
| Fibre optic interconnecting devices and passive components - Interface standard for closures - Part 1: General and guidance | |
| Fibre optic interconnecting devices and passive components - Reliability of fibre optic interconnecting devices and passive optical components -- Part 9-2: Reliability qualification for single fibre optic connector sets -... | |
| Fibre optic interconnecting devices and passive components performance standard - Part 021-2: Grade C/3 single-mode fibre optic connectors for category C - Controlled environment | |
| Fibre optic interconnecting devices and passive components performance standard - Part 021-6: Grade B/2 single-mode fibre optic connectors for category O - Uncontrolled environment | |
| Fibre optic interconnecting devices and passive components performance standard - Part 053-3: Continuously variable attenuators for category U - Uncontrolled environment | |
| Fibre optic interconnecting devices and passive components performance standard - Part 061-3: Single mode fibre optic pigtailed style isolators for category U - Uncontrolled environment | |
| Fibre optic interconnecting devices and passive components performance standard - Part 091-3: Single-mode fibre optic pigtailed style circulators for category U - Uncontrolled environment | |
| Fibre optic interconnecting devices and passive components performance standard - Part 101-3: Fibre management systems for Category U - Uncontrolled environment | |
| Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards | |
| Fibre optic interconnecting devices and passive components performance standard -- Part 081-2: Non-connectorised single-mode fibre optic middle-scale 1 x N DWDM devices for category C - Controlled environments | |
| Fibre optic interconnecting devices and passive components performance standard -- Part 082-2: Pigtailed single-mode fibre optic 1,31/1,55 µm WWDM Devices for category C - Controlled environment | |
| Fibre optic interconnecting devices and passive components performance standard -- Part 083-2: Non-connectorised single-mode fibre optic C-band/L-band WDM devices for category C - Controlled environment | |
| Fibre optic interconnecting devices and passive components performance standard -- Part 084-2: Non connectorised single-mode 980/1550 nm WWDM devices for category C - Controlled environment | |
| Fibre optic interconnecting devices and passive components performance standard -- Part 085-2: Non-connectorised single-mode pigtailed CWDM devices for category C - Controlled environment | |
| Fibre optic interconnecting devices and passive components performance standard -- Part 101-2: Fibre management systems for category C - Controlled environment | |
| Fibre optic interconnecting devices and passive components performance standard -- Part 3-1: Single-mode fibre optic non-connectorised DWDM devices for category C - Controlled environment | |
| Fibre optic interconnecting devices and passive components- Basic test and measurement procedures- Part 3-42: Examinations and measurements- Attenuation of single mode alignment sleeves and or adaptors with resilient alignment sleeves... | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TESTS AND MEASUREMENT PROCEDURES. PART 3-17: EXAMINATIONS AND MEASUREMENT | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TESTS AND MEASUREMENT PROCEDURES. PART 3-2: EXAMINATIONS AND MEASUREMENTS. POLARISATION DEPENDENCE OF A SINGLE-MODE FIBRE OPTIC DEVICE | |
| Fibre optic passive components performance standard -- Part 022-2: Fibre optic connectors terminated on multimode fibre for Category C - Controlled environment | |
| Fibre optic WDM devices -- Part 1: Generic specification. | |
| Fibre-optic communication subsystem basic test procedures -- Part 4-1: Test procedures for fibre-optic cable plant and links - Multimode fibre optic-cable plant attenuation measurement | |
| Filters using waveguide type dielectric resonators -- Part 1: Generic specification | |
| Filters using waveguide type dielectric resonators -- Part 2: Guide to the use | |
| Function Block -- Part 1: Architecture | |
| Function Block -- Part 2: Software tools requirements | |
| Function blocks (FB) for process control - Part 2: Specification of FB concept | |
| Function Blocks (FB) for process control -- Part 2: Specification of FB concept and Electronic Device Description Language (EDDL) | |
| Function blocks (FB) for process control -- Part 3: Electronic Device Description Language (EDDL) | |
| Function blocks - Part 4: Rules for compliance profiles | |
| Function blocks for process control -- Part 1: General requirements | |
| Function blocks for process control -- Part 2: Specification of function block concept and electronic device description language (EDDL) | |
| General methods of measurement for digital television receivers | |
| Generic cabling systems - Specification for the testing of balanced communication cabling in accorance with ISO/IEC 11801 - Part 1: Installed cabling | |
| Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173 -- Part 2: Patch cords and work area cords | |
| Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 -- Part 2-20: Work area cord for class D applications - Blank detail... | |
| Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 -- Part 2: Patch cords and work area cabling | |
| Global Navigation Satellite Systems (GNSS) -- Part 1: Global Positioning System (GPS) - Receiver equipment - Performance standards, methods of testing and required test results | |
| Grading capacitors for high-voltage alternating current circuit-breakers | |
| Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-7 -- Part 1: VTR specifications (IEC 62071-1:2005) | |
| Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-7 -- Part 2: Compression format (IEC 62071-2:2005). | |
| Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-7 -- Part 3: Data stream format (IEC 62071-3:2005) | |
| Helical-scan digital video cassette recording format using 12,65 mm magnetic tape and incorporating MPEG-4 compression - Type D-16 format (IEC 62141:2005 ) | |
| High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor | |
| High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC to DC converters | |
| High frequency inductive components - Non-electrical characteristics and measuring methods - Part 1: Fixed, surface mounted inductors for use in electronic and telecommunication equipment | |
| High-voltage switchgear and controlgear - Part 304: Design classes for indoor enclosed switchgear and controlgear for rated voltages above 1 kV up to and including 52 kV to be used... | |
| IEC 61834: Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1125-50 systems) -- Part 11: HDV format for... | |
| Industrial communication networks - Fieldbus specifications - Part 3-1: Data-link layer service definition - Type 1 elements | |
| Industrial communication networks - Fieldbus specifications - Part 4-1: Data-link layer protocol specification - Type 1 elements | |
| Industrial communication networks - Fieldbus specifications -- Part 2: Physical layer specification and service definition | |
| Industrial communication networks - Installation of communication networks in industrial premises | |
| Industrial communication networks - Profiles -- Part 1: Fieldbus profiles | |
| Industrial electroheating installations - Test methods for induction channel and induction crucible furnaces | |
| Industrial process control systems - Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs | |
| Industrial-process control - Safety of analyzer houses | |
| Industrial-process measurement and control - Data structures and elements in process equipment catalogues -- Part 1: Measuring equipment with analogue and digital output | |
| Infrared free air applications | |
| Installation couplers intended for permanent connection -- Part 1: General requirements | |
| Instruments and software used for measurements in high-voltage and high-current tests - Part 1: Requirements for instruments for impulse tests | |
| INSTRUMENTS AND SOFTWARE USED FOR MEASUREMENTS IN HIGH-VOLTAGE IMPULSE TESTS -- PART 1: REQUIREMENTS FOR INSTRUMENTS | |
| Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated moulded... | |
| Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes -- Part 2: Methods of test | |
| Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 3: Round laminated moulded... | |
| Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 5: Measurement of conducted emissions, workbench faraday cage method | |
| Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz -- Part 2: Measurement of radiated emissions, TEM-cell and wideband TEM-cell method | |
| Integrated circuits - Measurement of electromagnetic immunity, 150 kHz to 1 GHz - Part 1: General conditions and definitions | |
| Integrated circuits - Measurement of electromagnetic immunity, 150 kHz to 1 GHz - Part 3: Bulk current injection (BCI) method | |
| LIQUID CRYSTAL AND SOLID-STATE DISPLAY DEVICES -- PART 2-1: PASSIVE MATRIX MONOCHROME LCD MODULES - BLANK DETAIL SPECIFICATION | |
| Liquid crystal and solid-state display devices -- Part 2-2: Matrix colour LCD modules - Blank detail specification | |
| Liquid crystal and solid-state display devices -- Part 4-2: Matrix colour LCD modules - Essential rating and characteristics | |
| Liquid crystal and solid-state display devices -- Part 6: Measuring methods for liquid crystal modules - Transmissive type | |
| Liquid crystal display devices - Part 3-1: Liquid crystal display (LCD) cells - Blank detail specification | |
| Liquid crystal display devices - Part 3: Liquid crystal display (LCD) cells - Sectional specification | |
| Liquid crystal display devices -- Part 5-3: Environmental, endurance and mechanical test methods - Glass strength and reliability | |
| LIVE WORKING - CONDUCTOR COVERS (LINE HOSES) OF INSULATING MATERIAL FOR ELECTRICAL PURPOSES | |
| Live working - Protective clothing against the thermal hazards of an electric arc -- Part 2: Requirements | |
| Live working - Quality assurance plans applicable to tools, devices and equipment | |
| LIVE WORKING. VOLTAGE DETECTORS. PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES OF 1 KV TO 36 KV A.C. | |
| Low-voltage surge protective devices - Part 22: Surge protective devices connected to telecommunications and signalling networks - Selection and application principles | |
| Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i) | |
| Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet | |
| Low-voltage switchgear and controlgear - Controllers for drivers of stationary fire pumps | |
| Magnetic oxide cores (ETD-cores) intended for use in power supply applications - Dimensions | |
| Maritime navigation and radiocommunication equipment and systems - Automatic identification systems (AIS) -- Part 2: Class A shipborne equipment of the universal automatic identification system (AIS) - Operational and performance... | |
| Maritime navigation and radiocommunication equipment and systems - Digital interfaces -- Part 1: Single talker and multiple listeners | |
| Maritime navigation and radiocommunication equipment and systems - Digital interfaces -- Part 402: Documentation and test requirements - Multiple talkers and multiple listeners - Ship systems interconnections | |
| Maritime navigation and radiocommunication equipment and systems - Electronic chart display and information system (ECDIS) - Operational and performance requirements, methods of testing and required test results | |
| Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 4: Shipborne DGPS and DGLONASS maritime radio beacon receiver equipment - Performance requirements, methods of... | |
| Maritime navigation and radiocommunication equipment and systems - Integrated navigation systems - Operational and performance requirements, methods of testing and required test results (IEC 61924:2006) | |
| Maritime navigation and radiocommunication equipment and systems - Presentation of navigation-related information on shipborne navigational displays - General requirements, methods of testing and required test results | |
| Maritime navigation and radiocommunication equipment and systems - Radar for craft not in compliance woth IMO SOLAS Chapter V - Performance requirements methods of test and required test results results... | |
| Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Part 1: Voyage data recorder (VDR) - Performance requirements, methods of testing and required test results... | |
| Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) -- Part 2: Simplified voyage data recorder (S-VDR) - Performance requirements, methods of testing and required test... | |
| Maritime navigation and radiocommunication equipment and systems - VHF radiotelephone equipment incorporating Class "D" digital selective calling (DSC) - Methods of testing and required test results equipment for class D... | |
| Maritime navigation and radiocommunication equipment and systems- Shipborne voyage data recorder (VDR)- Part 2: Simplified voyage data recorder (S-VDR)- Performance requirements, methods of testing and required test results | |
| Materials for interconnecting structures -- Part 4-1: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Epoxide woven E-glass prepreg of defined flammability. | |
| Materials for interconnection structures -- Part 2-22: Sectional specification set for reinforced base materials clad and unclad - Modified non-halogenated epoxide woven E-glass laminated sheet of defined flammability (vertical burning... | |
| Materials for printed boards and other interconnecting structures -- Part 2-1: Sectional specification set for reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminate sheet, economic grade,... | |
| Materials for printed boards and other interconnecting structures -- Part 2-23: Reinforced base materials, clad and unclad - Non-halogenated phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad | |
| Materials for printed boards and other interconnecting structures -- Part 2-26: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning... | |
| Materials for printed boards and other interconnecting structures -- Part 2-36: Reinforced base materials, clad and unclad - Epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad... | |
| Materials for printed boards and other interconnecting structures -- Part 2-37: Reinforced base materials, clad and unclad - Modified non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning... | |
| Materials for printed boards and other interconnecting structures -- Part 2-38: Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test),... | |
| Materials for printed boards and other interconnecting structures -- Part 4-11: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Non-halogenated epoxide woven E-glass prepreg... | |
| Materials for printed boards and other interconnecting structures -- Part 4-12: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Non-halogenated multifunctional epoxide woven E-glass... | |
| Materials for printed boards and other interconnecting structures -- Part 4-14: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Epoxide woven E-glass prepreg of... | |
| Materials for printed boards and other interconnecting structures -- Part 4-15: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional epoxide woven E-glass prepreg... | |
| Materials for printed boards and other interconnecting structures -- Part 4-16: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional non-halogenated epoxide woven E-glass... | |
| Materials for printed boards and other interconnecting structures -- Part 4-17: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Non-halogenated epoxide woven E-glass prepreg... | |
| Materials for printed boards and other interconnecting structures -- Part 4-2: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) -- Multifunctional epoxide woven E-glass prepreg... | |
| Materials for printed boards and other interconnecting structures -- Part 4-5: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Polyimide, modified or unmodified, woven... | |
| Materials for printed boards and other interconnecting structures -- Part 4: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Section 1: Expoxide woven E-glass... | |
| Materials for printed boards and other interconnecting structures- Part 2-31: Reinforced base materials clad and unclad for high frequency application- Halogenated modified or unmodified resin system, woven E-glass laminated sheets... | |
| Materials for printed boards and other interconnecting structures- Part 2-32: Reinforced base materials clad and unclad for high frequency application- Halogenated modified or unmodified resin system, woven E-glass laminated sheets... | |
| Materials for printed boards and other interconnecting structures- Part 2-33: Reinforced base materials clad and unclad for high frequency application- Non-halogenated modified or unmodified resin system, woven E-glass laminated sheets... | |
| Materials for printed boards and other interconnecting structures- Part 2-34: Reinforced base materials clad and unclad for high frequency application- Non-halogenated modified or unmodified resin system, woven E-glass laminated sheets... | |
| Materials for printed boards and other interconnection structures - Part 2-2: Sectional specification set for reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminate, high electrical grade,... | |
| Measurement of electromagnetic immunity, 150 kHz to 1 GHz -- Part 5: Workbench Faraday Cage method | |
| Mechanical safety of cathode ray tubes | |
| Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 6: Security aspects for indoor cabinets | |
| Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 3: Electromagnetic shielding performance tests for cabinets, racks and subracks | |
| Metallic communication cable test method - Part 4-3: Electro magnetic Compatibility (EMC) - Surface transfer impedance - Triaxial method | |
| Metallic communication cables test methods - Part 4-5: Electro Magnetic Compatibility (EMC) - Coupling or screening attenuation - absorbing clamp method | |
| Metallic telecommunication cable test methods -- Part 1: Screening and coupling attenuation - Injection clamp method | |
| Method for determining losses and efficiency of three-phase cage induction motors | |
| Method of determining enclosure thermal performance by the influence of internal heat load and sun radiation | |
| Methods for calculating the current density and internal electric field induced in the human body by electric or magnetic fields in the low and intermediate frequency range -- Part 2... | |
| Methods for calculating the current density and internal electric field induced in the human body by electric or magnetic fields in the low and intermediate frequency range. Part 1: Scope,... | |
| Mobile and portable DVB-T/H radio access - Part 1: Interface specification | |
| Modular Component Interfaces for Surface-Mount Fluid Distribution Components -- Part 1: Elastomeric Seals | |
| Multicore and symmetrical pair/quad cables for broadband digital communications (High bit rate digital access telecommunication network) - Outside plant cables -- Part 1: Generic specification | |
| Multicore and symmetrical pair/quad cables for broadband digital communications (High bit rate digital access telecommunication network) - Outside plant cables -- Part 2-1: Blank detail specification for unfilled cables | |
| Multicore and symmetrical pair/quad cables for broadband digital communications (High bit rate digital access telecommunication network) - Outside plant cables -- Part 2: Sectional specification for unfilled cables | |
| Multicore and symmetrical pair/quad cables for broadband digital communications (High bit rate digital access telecommunication network) - Outside plant cables -- Part 3-1: Blank detail specification for filled cables | |
| Multicore and symmetrical pair/quad cables for broadband digital communications (High bit rate digital access telecommunication network) - Outside plant cables -- Part 3: Sectional specification for filled cables | |
| Multicore and symmetrical pair/quad cables for broadband digital communications (High bit rate digital access telecommunication network) - Outside plant cables -- Part 4-1: Blank detail specification for aerial drop cables... | |
| Multicore and symmetrical pair/quad cables for broadband digital communications (High bit rate digital access telecommunication network) - Outside plant cables -- Part 4: Sectional specification for aerial drop cables | |
| Multicore and symmetrical pair/quad cables for broadband digital communications (High bit rate digital access telecommunication network) - Outside plant cables -- Part 5-1: Blank detail specification for filled drop cables... | |
| Multicore and symmetrical pair/quad cables for broadband digital communications (High bit rate digital access telecommunication network) - Outside plant cables -- Part 5: Sectional specification for filled drop cables | |
| Multimedia systems - Common communication protocol for inter-connectivity on heterogeneous networks | |
| Multimedia systems and equipment - Colour measurement and management -- Part 2-4: Colour management - Extended-gamut YCC colour space for video applications - xvYCC (IEC 61966-2-4:2006 ) | |
| Multimedia systems and equipment - Multimedia home server systems - Vocabulary of home server | |
| Nuclear power plants - Control rooms - Application of visual display units (VDUs) | |
| Nuclear power plants - Control rooms - Operator controls | |
| Nuclear power plants - Design of control rooms - Functional analysis and assignment | |
| Nuclear power plants - Instrumentation and control important for safety - Software aspects for computer-based systems performing category B or C functions | |
| Nuclear power plants - Instrumentation and control important to safety - Classification of instrumentation and control functions | |
| Nuclear power plants - Instrumentation and control important to safety - Data communication in systems performing category A functions | |
| Nuclear power plants - Instrumentation and control important to safety - General requirements for systems | |
| Nuclear power plants - Main control room - Alarm functions and presentation | |
| Optical amplifier specifications -- Part 4: Multichannel applications - Performance specification template | |
| Optical amplifier test methods - Part 5-2: Reflectance parameters - Electrical spectrum analyzer method | |
| Optical amplifier test methods -- Part 11-2: Polarization mode dispersion - Poincaré sphere analysis method | |
| Optical amplifier test methods -- Part 3-2: Noise figure parameters - Electrical spectrum analyzer method | |
| Optical amplifiers - Basic specification -- Part 11-1: Test methods for polarization mode dispersion - Jones matrix eigenanalysis method | |
| Optical amplifiers - Part 5-2: Qualification specifications - Reliability qualification for optical fibre amplifiers | |
| Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method | |
| Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer | |
| Optical amplifiers - Test methods -- Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer | |
| Optical amplifiers - Test methods -- Part 10-3: Multichannel parameters - Probe methods | |
| Optical amplifiers - Test methods -- Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer | |
| Optical amplifiers - Test methods -- Part 11-1: Polarization mode dispersion parameter - Jones matrix eigenanalysis (JME) | |
| Optical amplifiers - Test methods -- Part 3: Noise figure parameters | |
| Optical amplifiers - Test methods -- Part 5-1: Reflectance parameters - Optical spectrum analyzer method (IEC 61290-5-1:2006). | |
| Optical amplifiers - Test methods -- Part 7-1: Out-of-band insertion losses - Filtered optical power meter method | |
| Optical amplifiers - Test methods. Part 10-2: Multichannel parameters - Pulse mehod using a gated optical spectrum analyzer | |
| Optical amplifiers -- Part 2: Digital applications - Performance specification template | |
| Optical amplifiers -- Part 4: Multichannel applications - Performance specification template | |
| Opticial amplifiers -- Part 6-1: Interfaces - Command set | |
| PART 3: ELECTROMAGNETIC SHIELDING PERFORMANCE TESTS FOR CABINETS, RACKS AND SUBRACKS FOR THE IEC 60917-... AND 60297-... SERIES | |
| PERFORMANCE SPECIFICATION TEMPLATE. PART 2: OPTICAL FIBRE AMPLIFIERS FOR DIGITAL APPLICATIONS | |
| Photovoltaic (PV) systems - Characteristics of the utility. | |
| Plasma display panels -- Part 2-3: Measuring methods - Image quality: defects and degradation | |
| Plasma display panels -- Part 3-2: Interface - Electrical interface | |
| Plasma Display Panels -- Part 3: Mechanical interface | |
| Plasma display panels -- Part 5: Generic specification | |
| Printed board assemblies - Part 2: Sectional specification - Requirements for surface mount soldered assemblies | |
| Printed board assemblies - Part 3: Sectional specification - Requirements for through-hole mount soldered assemblies | |
| Printed board assemblies - Part 4: Sectional specification - Requirements for terminal soldered assemblies | |
| Printed boards and printed board assemblies - Design and use - Part 5-1: Attachment (land/joint) considerations - Generic requirements | |
| Printed boards and printed board assemblies - Design and use - Part 5-4: Attachment (land/joint) considerations - Components with J leads on two sides | |
| Printed boards and printed board assemblies - Design and use - Part 5-5: Attachment (land/joint) considerations - Components with gull-wing leads on four sides | |
| Printed boards and printed board assemblies - Design and use - Part 7: Electronic component zero orientation for CAD library construction | |
| Printed boards and printed board assemblies - Design and use -- Part 5-2: Attachment (land/joint) considerations - Discrete components | |
| Process measurement and control devices - General methods and procedures for evaluating performance -- Part 1: General considerations | |
| Process measurement and control devices - General methods and procedures for evaluating performance -- Part 2: Tests under reference conditions | |
| Process measurement and control devices - General methods and procedures for evaluating performance -- Part 3: Tests for the effects of influence quantities | |
| Process measurement and control devices - General methods and procedures for evaluating performance -- Part 4: Evaluation report content | |
| Product package labels for electronic components using bar code and two- dimensional symbologies | |
| Programmable controllers -- Part 2: Equipment requirements and tests | |
| Protection against lightning - Part 1: General principles | |
| Quality assessment systems -- Part 2: Selection and use of sampling plans for inspection of electronic components and packages | |
| Radiation protection instrumentation - Installed radiation monitors for the detection of radioactive and special nuclear materials at national borders | |
| Radiation protection instrumentation - Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations - Direct reading personal dose equivalent meters | |
| Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 1: General principles | |
| Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 2: Specific requirements for 222Rn and 220Rn measuring instruments | |
| Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 3: Specific requirements for radon decay product measuring instruments | |
| Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 4: Equipment for the production of reference atmospheres containing radon isotopes and their decay products (STAR) | |
| RADIO FREQUENCY CONNECTORS. PART 1-1: SINGLE, MULTI-SERIES, DUAL-LANGUAGE BLANK DETAIL SPECIFICATION. | |
| RADIO FREQUENCY CONNECTORS. PART 33: SECTIONAL SPECIFICATION FOR SERIES BMA R.F. CONNECTORS. | |
| RADIO FREQUENCY CONNECTORS. PART 36: SECTIONAL SPECIFICATION FOR MICROMINIATURE R.F. COAXIAL CONNECTORS WITH SNAP-ON COUPLING. CHARACTERISTIC IMPEDANCE 50 OHMS (TYPE MCX). | |
| Radio-frequency connectors - Part 16: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 7 mm (0,276 in) with screw coupling - Characteristic impedance 50 ohms (75... | |
| Radio-frequency connectors - Part 37: Sectional specification for STWX8 R.F connectors | |
| Radio-frequency connectors - Part 59: Sectional specification for type L32-4 and L32-5 threaded multi-pin radio-frequency connectors | |
| Radio-frequency connectors -- Part 29: Sectional specification - Miniature radio frequency coaxial connectors model screw, snap-on, push-pull or quick-lock, slide-in (rack and panel applications) - Characteristic impedance 50 ohms (type... | |
| Radio-frequency connectors -- Part 2: Sectional specification - Radio frequency coaxial connectors of type 9,52 | |
| Radio-frequency connectors -- Part 38: Sectional specification - Radio frequency coaxial connectors model, slide-in (rack and panel applications) - Characteristic impedance 50 O (type TMA) - 50 O applications | |
| Radio-frequency connectors -- Part 8: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 50 ohms (type... | |
| Railway applications - Communications, signalling and processing systems - Software for railway control and protection systems | |
| Railway applications - Electromagnetic compatibility -- Part 1: General | |
| Railway applications - Electromagnetic compatibility -- Part 2: Emission of the whole railway system to the outside world | |
| Railway applications - Electromagnetic compatibility -- Part 3-1: Rolling stock - Train and complete vehicle | |
| Railway applications - Electromagnetic compatibility -- Part 3-2: Rolling stock ¿ Apparatus | |
| Railway applications - Electromagnetic compatibility -- Part 4: Emission and immunity of the signalling and telecommunications apparatus | |
| Railway applications - Electromagnetic compatibility -- Part 5: Emission and immunity of fixed power supply installations and apparatus | |
| Reed contact units - Part 2: Heavy-duty reed switches | |
| Reed contacts unit -- Part 1: Generic specification | |
| Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation | |
| Safety of machinery - Application of protective equipment to detect the presence of persons | |
| Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR) | |
| SAfety of machinery - Functional safety of electrical, electronic and programmable control systems | |
| Seismic qualification of switchgear and prefabricated switchgear assemblies for rated voltages of 72,5 kV and above | |
| Semiconductor devices - Micro-electromechani cal devices - Part 1: Terms and definitions | |
| Semiconductor devices - Micro-electromechani cal devices -- Part 2: Tensile testing method of thin film materials | |
| Semiconductor devices - Micro-electromechani cal devices -- Part 3: Thin film standard test piece for tensile testing | |
| Semiconductor devices - Micro-electromechani cal devices -- Part 4: Generic specification for MEMS | |
| Semiconductor devices - Micro-electromechani cal devices -- Part 6: Axial fatigue testing methods of thin film materials | |
| Semiconductor die products -- Part 1: requirements for procurement and use | |
| Semiconductor die products -- Part 2: Exchange data formats | |
| Semiconductor die products -- Part 5: Requirements for information concerning electrical simulation (IEC 62258-5:2006) | |
| Semiconductor die products -- Part 6: Requirements for information concerning thermal simulation | |
| Semiconductor optoelectronic devices for fibre optic system applications -- Part 1: Specification template for essential ratings and characteristics | |
| Semiconductor optoelectronic devices for fibre optic system applications -- Part 2: Measuring methods | |
| Service diagnostic interface for consumer electronics products and netwoks | |
| Simplified thermal performance testing of steam turbines and their cycles | |
| Single crystal wafers applied for Surface Acoustic Wave (SAW) device appplications - Specifications and measuring methods | |
| Soft ferrite material classification | |
| SOFT SOLDERING -- PART 5: REGISTRATION AND ANALYSIS OF DEFECTS ON PRINTED BOARD ASSEMBLIES | |
| Specification for the testing of balanced and coaxial information technology cabling - Part 1: Installed balanced cabling as specified in the standards series EN 50173 | |
| Standard data element types with associated classification scheme for electric components - Part 2: EXPRESS dictionary schema | |
| Standard data element types with associated classification scheme for electric components - Part 5: Extensions to the EXPRESS dictionary schema | |
| Static Transfer System (STS) -- Part 1: General and safety requirements | |
| Static transfer systems (STS) -- Part 2: Electromagnetic compatibility (EMC) requirements | |
| Static transfer systems (STS) -- Part 3: Method for specifying performance and test requirements | |
| Superconductivity - Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors | |
| Superconductivity - Part 7: Electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies | |
| Superconductivity -- Part 1: Critical current measurement - DC critical current of Nb-Ti composite superconductors | |
| Superconductivity -- Part 2: Critical current measurement - DC critical current of Nb3Sn composite superconductors | |
| Superconductivity -- Part 3: Critical current measurement - DC critical current of Ag- and/or Ag alloy-sheathed Bi-2212 and Bi-2223 oxide superconductors | |
| Superconductivity -- Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors | |
| Superconductivity -- Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors | |
| Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 4: Hybrid enclosure outlines | |
| Surface mounting technology - Environmental and endurance test methods for surface mount solder joint -- Part 1-1: Pull strength test | |
| Surface mounting technology - Environmental and endurance test methods for surface mount solder joint -- Part 1-2: Shear strength test | |
| Surface mounting technology - Environmental and endurance test methods for surface mount solder joint -- Part 1-3: Cyclic drop test | |
| Surface mounting technology - Environmental and endurance test methods for surface mount solder joint -- Part 1-4: Cyclic bending test | |
| Surface mounting technology - Environmental and endurance test methods for surface mount solder joints -- Part 1-5: Mechanical shear fatigue test | |
| Surface mounting technology - Part 1: Standard method for the specification of surface mounting components (SMDs) | |
| Surface mounting technology - Part 2: Transportation and storage conditions of surface mounting devices (SMD) - Application guide | |
| System interfaces for distribution management -- Part 1: Interface architecture and general requirements | |
| Television METADATA - Part 1: Metadata dictionary structure | |
| Television METADATA - Part 2: Data encoding protocol using key-length-value | |
| Teleweb application -- Part 1: General description | |
| Teleweb application -- Part 2: Delivery methods | |
| Teleweb application -- Part 3: Superteletext profile (TA1) | |
| TeleWeb application -- Part 4: Hyperteletext profile | |
| Test method for the mechanical strength of cores made of magnetic oxides | |
| Test methods for electrical materials, interconnection structures and assemblies - Part 5: Test methods for printed board assemblies | |
| Test methods for electrical materials, interconnection structures and assemblies - Part 6: Test methods for materials used in manufacturing electronic assemblies | |
| Testing of balanced and coaxial information technology cabling - Part 3: Installed cabling as specified in EN 50173-4 and related standards | |
| THERMAL EVALUATION OF CHANGES TO AN ESTABLISHED ELECTRICAL INSULATION SYSTEM | |
| TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT. PART 1: GENERIC SPECIFICATION | |
| TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT. PART 2: SECTIONAL SPECIFICATION FO SIGNAL TRANSFORMERS ON THE BASIS OF THE CAPABILITY APPROVAL PROCEDURE | |
| TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT. PART 3: SECTIONAL SPECIFICATION FOR POWER TRANSFORMERS ON THE BASIS OF THE CAPABILITY APPROVAL PROCEDURE | |
| TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT. PART 4: SECTIONAL SPECIFICATION FOR POWER TRANSFORMERS FOR SWITCHED MODE POWER SUPPLIES (SMPS) ON THE BASIS OF THE CAPABILITY APPROVAL... | |
| TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT. PART 5: SECTIONAL SPECIFICATION FOR PULSE TRANSFORMERS ON THE BASIS OF THE CAPABILITY APPROVAL PROCEDURE | |
| TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT. PART 6: SECTIONAL SPECIFICATION FOR INDUCTORS ON THE BASIS OF THE CAPABILITY APPROVAL PROCEDURE | |
| Transmission of audio and/or video and related signals using infra-red radiation -- Part 8-1: Digital audio and related signals | |
| Triggering messages for braodcast applications -- Part 2: Transport methods | |
| Triggering messages for broadcast applications -- Part 1: Format | |
| Ultrasonics - Field characterization - In situ exposure estimation in finite-amplitude ultrasonic beams | |
| Uninterruptible power systems (UPS) - Part 1: General and safety requirements for UPS | |
| Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements | |
| Video recording - Helical-scan digital video cassette recording format using 12,65 mm magnetic tape and incorporating MPEG-2 Compression - Format D-10 | |
| Waveguide type dielectric resonators - Part 2: Guide to the use of waveguide type dielectric resonators | |
| Waveguide type dielectric resonators -- Part 1-4: General information and test conditions - Measurement method of complex relative permittivity for dielectric resonator materials at millimetre-wave frequency | |
| Waveguide type dielectric resonators -- Part 4: Sectional specification | |
| Waveguide type dielectric resonators of assessed quality -- Part 1: Generic specification | |
| Waveguide type dielectric resonators of assessed quality -- Part 4-1: Blank detail specification | |
| Wind turbines -- Part 25-4: Communications for monitoring and control of wind power plants - Mapping to XML based communication profile | |
| Workmanship requirements for soldered electronic assemblies - Part 2: Surface-mount assemblies | |
| Workmanship requirements for soldered electronic assemblies - Part 5: Rework, modification and repair of soldered electronic assemblies |
| << Prev | Next >> |