AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| 0,6/1 kV and 1,9/3,3 kV power cables with special fire performance for use in power stations | |
| Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions | |
| Accuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method | |
| ACOUSTICS. TEST CODE FOR THE MEASUREMENT OF AIRBORNE NOISE EMITTED BY ROTATING ELECTRICAL MACHINERY (REVISION OF ISO 1680-1:1986 AND ISO 1680-2:1986) | |
| Adhesives for ceramic tiles - Part 1: Essential characteristics and AVCP | |
| Adhesives for ceramic tiles - Part 3: Terminology, specifications, designation and marking | |
| Advanced technical ceramic - Ceramic composites - Methods of test for reinforcements - Part 6: Determination of tensile properties of filaments at high temperature | |
| Advanced technical ceramics - Methods of test for ceramic coatings - Part 3: Determination of adhesion and other mechanical failure modes by a scratch test | |
| Advanced technical ceramics - Methods of test for ceramic coatings - Part 6: Determination of the abrasion resistance of coatings by a micro-abrasion wear test | |
| Advanced technical ceramics- Ceramic composites- Methods of test for reinforcements- Part 5: Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow... | |
| Agricultural irrigation equipment. Volumetric valves. General requirements and test methods | |
| Agricultural vehicles -- Mechanical connections on towed vehicles -- Dimensions for hitch rings | |
| Air quality. Exchange of data. Part 1: General data format. | |
| Air quality. General aspects. Vocabulary | |
| Air quality. Test method for filtration characterization of cleanable filter media | |
| Alarm systems - Alarm transmission systems and equipment - Part 9: Requirements for common protocol for alarm transmission using the Internet protocol | |
| Amendment 1 - Low-voltage electrical installations - Part 8-82: Functional aspects - Prosumer's low-voltage electrical installations | |
| AMENDMENT 1 OF ISO 10555-1 STERILE, SINGLE-USE INTRAVASCULARCATHETE RS. PART 1:1995 - GENERAL REQUIREMENTS | |
| ANIMAL FEEDING STUFFS - DETERMINATION OF AVAILABLE LYSINE | |
| ANIMAL FEEDING STUFFS - DETERMINATION OF NITROGEN CONTENT AND CALCULATION OF CRUDE PROTEIN CONTENT - KJELDAHL METHOD | |
| Animal feeding stuffs - PCR typing of probiotic strains of Saccharomyces cerevisiae (yeast) | |
| Animal feeding stuffs. Preparation of test samples | |
| Artificial pollution tests on high-voltage polymeric insulators to be used on AC and DC systems | |
| Assembly tools for screws and nuts -- Screwdrivers for cross-recessed head screws -- Part 1: Driver tips | |
| Blankets of insulating material for electrical purposes | |
| BLOOD GAS EXCHANGERS (OXYGENATORS) | |
| BOARD - SPECIFICATION OF SOLID AND CORRUGATED FIBREBOARD FOR PACKAGING PURPOSES | |
| Brazing - Filler metals | |
| BRIGHT STEEL PRODUCTS. TECHNICAL DELIVERY CONDITIONS. PART 1: GENERAL. | |
| BRIGHT STEEL PRODUCTS. TECHNICAL DELIVERY CONDITIONS. PART 3: FREE-CUTTING STEELS. | |
| BRIGHT STEEL PRODUCTS. TECHNICAL DELIVERY CONDITIONS. PART 4: CASE-HARDENING STEELS. | |
| BRIGHT STEEL PRODUCTS. TECHNICAL DELIVERY CONDITIONS. PART 5: STEELS FOR QUENCHING AND TEMPERING. | |
| Build hardware - Panic exit devices operated by a horizontal bar, for use on escape routes - Requirements and test methods | |
| Building and civil engineering drawings - Installations - Part 2: Simplified representation of sanitary appliances | |
| Building construction machinery and equipment — Internal vibrators for concrete — Vocabulary and commercial specifications | |
| BUILDING CONSTRUCTION. SEALANTS FOR JOINTS. DETERMINATION OF CHANGE IN MASS AND VOLUME | |
| BUILDING CONSTRUCTION. SEALANTS. DETERMINATION OF ADHESION/COHESION PROPERTIES AFTER IMMERSION IN WATER | |
| BUILDING CONSTRUCTION. SEALANTS. DETERMINATION OF ADHESION/COHESION PROPERTIES AT MAINTAINED EXTENSION AFTER IMMERSION IN WATER | |
| BUILDING CONSTRUCTION. SEALANTS. DETERMINATION OF ADHESION/COHESION PROPERTIES AT VARIABLE TEMPERATURES | |
| BUILDING CONSTRUCTION. SEALANTS. DETERMINATION OF RESISTANCE TO COMPRESSION | |
| BUILDING CONSTRUCTION. TOLERANCES. EXPRESSION OF DIMENSIONAL ACCURACY. PRINCIPLES AND TERMINOLOGY | |
| BUILDING HARDWARE - DOOR AND WINDOW BOLTS - REQUIREMENTS AND TEST METHODS | |
| Building hardware - Panic exit devices operated by a horizontal bar, for use on escape routes - Requirements and test methods | |
| Butt-welding pipe fittings - Part 1: Wrought carbon steel for general use and without specific inspection requirements | |
| Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements | |
| CATHODIC PROTECTION. EXTERNAL ORGANIC COATINGS FOR THE CORROSION OF BURIED OR IMMERSED STEEL PIPELINES USED IN CONJUNCTION WITH CATHODIC PROTECTION. TAPES AND SHRINKABLE MATERIALS. | |
| Cellular plastics. Determination of horizontal burning characteristics of small specimens subjected to a small flame. | |
| CERAMIC TILE ADHESIVES. DETERMINATION OF SHEAR ADHESION STRENGTH OF REACTION RESIN ADHESIVES | |
| CERAMIC TILE ADHESIVES. DETERMINATION OF TRANSVERSE DEFORMATION FOR CEMENTITIOUS ADHESIVES | |
| CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES. PART 1: DETERMINATION OF MEAN PROFILE DEPTH. | |
| Characterization of waste - Leaching behaviour tests - Influence of pH on leaching with initial acid/base addition | |
| CHEMICAL DISINFECTANTS AND ANTISEPTICS. PRODUCTS FOR HYGIENIC AND SURGICAL HANDRUB AND HANDWASH. BACTERICIDAL ACTIVITY. TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 1) | |
| Chemicals used for treatment of water intended for human consumption - Calcium carbonate | |
| Clay roofing tiles for discontinuous laying - Determination of geometric characteristics | |
| Climate change adaptation — Requirements and guidance on adaptation planning for local governments and communities | |
| Climate change management — Transition to net zero — Part 1: Carbon neutrality | |
| Cold formed steel sheet piles - Part 1: Technical delivery conditions | |
| Cold formed steel sheet piling - Part 1: Technical delivery conditions | |
| Cold formed steel sheet piling - Part 2: Tolerances on shape and dimensions | |
| Cold formed welded steel structural hollow sections - Part 1: Technical delivery conditions | |
| COLD-ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING. GENERAL DELIVERY CONDITIONS. | |
| Compliance management systems. Guidelines for the evaluation of effectiveness. | |
| Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors | |
| Concrete - Release of regulated dangerous substances into soil, groundwater and surface water - Test method for new or unapproved constituents of concrete and for production concretes | |
| Conflict of interest in organizations. Guidance. | |
| Conformity assessment — Guidelines for validation and verification programmes | |
| Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 11: Competence requirements for auditing and certification of facility management (FM) management systems. | |
| Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions | |
| CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS. PART 2: PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS. | |
| Control charts -- Part 4: Cumulative sum charts | |
| Control charts. Part 1: General guidelines | |
| CORROSION RESISTANT STEEL CASTINGS. | |
| Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts | |
| Cranes. Cabins. Part 2: Mobile Cranes | |
| CRANES. SAFETY. DESIGN REQUIREMENTS FOR HEALTH AND SAFETY. PART 2: LIMITING AND INDICATING DEVICES. | |
| DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS. HARDNESS TEST. PART 2: MICRO HARDNESS TESTING ON WELDED JOINTS. | |
| DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT. | |
| Diesel and domestic heating fuels. Determination of cold filter plugging point | |
| DIMENSIONAL TOLERANCES IN BUILDING CONSTRUCTION. BUILDINGS | |
| DISTRIBUTION CABLES OF RATED VOLTAGE 0,6/1 KV. | |
| Distribution cables of rated voltage 0,6/1 kV | |
| Distribution cables with extruded insulation for rated voltages from 3,6/6 (7,2) kV to 20,8/36 (42) kV. Part 5: XLPE insulated single core cables, and single core pre-assembled cables. Section E-1:... | |
| Distribution cables with extruded insulation for rated voltages from 3,6/6 (7,2) kV to 20,8/36 (42) kV. Part 9: HEPR insulated single core cables, and single core pre-assembled cables. Section E:... | |
| DISTRIBUTION CABLES WITH EXTRUDED INSULATION FOR RATED VOLTAGES FROM 3,6/6 (7,2) KV TO 20,8/36 (42) KV | |
| Document management -- Electronic content/document management data interchange format | |
| Durability of wood and wood-based products - Terminology | |
| Earth-moving machinery and rough-terrain trucks — Lighting, signalling and marking lights, and reflex reflectors | |
| Electric cables - Accessories - Material characterisation - Part 1: Fingerprinting and type tests for resinous compounds | |
| Electric cables - Accessories - Material characterisation - Part 2: Fingerprinting and type tests for heat shrinkable components for low voltage applications | |
| Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs) | |
| ELECTRICAL INSTALLATIONS OF BUILDINGS -- PART 4: PROTECTION FOR SAFETY -- CHAPTER 47: APPLIACATION FOR PROTECTIVE MEASURES FOR SAFETY - SECTION 473: MEASURES OF PROTECTION AGAINST OVERCURRENT | |
| Electrical installations of buildings -- Part 5-51: Selection and erection of electrical equipment - Common rules | |
| Electrical installations of buildings -- Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control | |
| ELECTRICAL INSTALLATIONS OF BUILDINGS -- PART 5: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT -- CHAPTER 56: SAFETY SERVICES | |
| ELECTRICAL INSTALLATIONS OF BUILDINGS. PART 4: PROTECTION FOR SAFETY. CHAPTER 41: PROTECTION AGAINST ELECTRIC SHOCK | |
| ELECTRICAL INSTALLATIONS OF BUILDINGS. PART 5: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT. CHAPTER 52: WIRING SYSTEMS | |
| Electricity metering - Data exchange for meter reading, tariff and load control - Glossary of terms - Part 1: Terms related to data exchange with metering equipment using DLMS/COSEM | |
| ELECTROLYTICALLY ZINC-NICKEL (ZN) COATED COLD ROLLED STEEL FLAT PRODUCTS. TECHNICAL DELIVERY CONDITIONS. | |
| Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity | |
| ELECTROMAGNETIC COMPATIBILITY. PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND PASSENGER CONVEYORS. EMISSION. | |
| ELECTROMAGNETIC COMPATIBILITY. PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND PASSENGER CONVEYORS. IMMUNITY. | |
| Energetic materials for defence - Safety, vulnerability - Friability | |
| Energy management systems — Requirements for bodies providing audit and certification of energy management systems | |
| Environmental labels and declarations — Principles, requirements and guidelines for communication of footprint information | |
| Environmental management systems. Guidelines for incorporating ecodesign | |
| Essential oils. Determination of acid value by two titration methods, manual and automatic | |
| Essential oils. Essential oil of sage from Spain (salvia lavandulifolia Vahl) | |
| Essential oils. Oil of red thyme, thymol type (Thymus zygis Loefl.), Spain | |
| Essential ois. Essential oil of Spanish wild marjoram (Thymus mastichina L.) | |
| EVALUATION OF RESISTANCE OF STEEL PRODUCTS TO HYDROGEN INDUCED CRACKING (HIC). | |
| EXECUTION OF SPECIAL GEOTECHNICAL WORK. SHEET-PILE WALLS | |
| Execution of steel structures and aluminium structures - Part 1: Assessment and verification of constancy of performance of steel components and aluminium components for structural use | |
| Execution of steel structures and aluminium structures - Part 4: Technical requirements for cold-formed structural steel elements and cold-formed structures for roof, ceiling, floor and wall applications | |
| Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications | |
| Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts, methodology and design | |
| EXTERNAL FIRE EXPOSURE TO ROOFS. PART 2: METHOD OF TEST SIMULATING EXPOSURE TO BURNING BRANDS, WITH WIND AND SUPPLEMENTARY RADIANT HEAT | |
| FERRITIC-PEARLITIC ENGINEERING STEELS FOR PRECIPITATION HARDENING FROM HOT-WORKING TEMPERATURES | |
| Fertilizers - Determination of different forms of nitrogen in fertilizers containing nitrogen only as nitric, ammoniacal and urea nitrogen by two different methods | |
| Finished non-alloy and alloy steel products for structural use | |
| Fire safety engineering — General principles — Part 1: General | |
| Fire safety engineering — Selection of design fire scenarios and design fires — Part 1: Selection of design fire scenarios | |
| FIXED FIRE FIGHTING SYSTEMS. COMPONENTS FOR CO2 SYSTEMS. PART 8: SPECIFICATION AND TEST METHODS FOR FLEXIBLE CONNECTORS. | |
| Fixed firefighting systems - Components for gas extinguishing systems - Part 11: Requirements and test methods for mechanical weighing devices | |
| Fixed firefighting systems - Components for gas extinguishing systems - Part 13: Characteristics for check valves and non-return valves | |
| Fixed firefighting systems - Components for gas extinguishing systems - Part 13: Requirements and test methods for check valves and non-return valves | |
| Fixed firefighting systems - Components for gas extinguishing systems - Part 7: Requirements and test methods for nozzles | |
| Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Characteristics for connectors | |
| Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors | |
| Fixed firefighting systems - Condensed aerosol extinguishing systems - Part 1: Requirements and test methods for components | |
| Fixed firefighting systems - Condensed aerosol extinguishing systems - Part 2: Design, installation and maintenance | |
| Fixed firefighting systems - Water spray systems - Design, installation and maintenance | |
| Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges | |
| Flued oil stoves with vaporizing burners | |
| Food processing machinery - Route map - Materials for food area | |
| FOOD PROCESSING MACHINERY. SAFETY AND HYGIENE REQUIREMENTS. BASIC CONCEPTS. PART 1: SAFETY REQUIREMENTS | |
| Food safety management systems. Guidance on the application of ISO 22000 | |
| FOODSTUFF - DETERMINATION OF NITRATE AND/OR NITRITE CONTENT- PART 7: CONTINUOUS FLOW METHOD FOR THE DETERMINATION OF NITRATE CONTENT OF VEGETABLES AND VEGETABLES PRODUCTS AFTER CADMIUM REDUCTION | |
| Foodstuffs - Determination of acesulfame-K, aspartame, neohesperidine-dihyd rochalcone and saccharin - High performance liquid chromatographic method | |
| Fraud control management systems. Guidance for organizations managing the risk of fraud. | |
| FREE-CUTTING STEELS. TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, HOT-ROLLED BARS AND RODS | |
| FUNCTIONAL REQUIREMENTS FOR THE MATERIALS, DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE AND RENOVATION OF GAS SUPPLY SYSTEMS UP TO AND INCLUDING 16 BAR. PART 3: RENOVATION | |
| Furniture - Foldaway beds - Safety requirements and test methods | |
| Gas analysis -- Conversion of gas mixture composition data | |
| Gas analysis -- Investigation and treatment of analytical bias | |
| Gas analysis -- Preparation of calibration gas mixtures using dynamic volumetric methods -- Part 9: Saturation method (ISO 6145-9:2009) | |
| GAS/AIR RATIO CONTROLS FOR GAS BURNERS AND GAS BURNING APPLIANCES. PART 1: MECHANICAL TYPES | |
| GENERAL FUNCTIONAL REQUIREMENTS FOR THE MATERIALS, DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE AND RENOVATION OF GAS SUPPLY UP TO AND INCLUDING 16 BAR | |
| General requirements for cold formed welded structural steel hollow sections | |
| GEOGRAPHIC INFORMATION. REFERENCE MODEL | |
| GEOTECHNICS IN CIVIL ENGINEERING - IDENTIFICATION AND CLASSIFICATION OF SOILS | |
| GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS. DETERMINATION OF WATER PERMEABILITY CHARACTERISTICS NORMAL TO THE PLANE, WITHOUT LOAD | |
| Glass in building - Coated glass - Part 4: Evaluation of conformity / Product standard | |
| Glass in building - Coated glass - Part 5: Test method and classification for the self-cleaning performances of coated glass surfaces | |
| Glass in building - Security glazing - Testing and classification of resistance against bullet attack | |
| Governance of organizations. Developing indicators for effective governance. | |
| Graphic technlogy. Process control for the production of half-tone colour separations, proofs and production prints. Part 3: Coldset offset lithography on newsprint. | |
| Graphic technology. Displays for colour proofing. Characteristics and viewing conditions | |
| Graphic technology. Laboratory preparation of test prints. Part 1: Paste inks | |
| Graphic Technology. Management of security printing processes | |
| Graphic technology. Prepress digital data exchange using PDF. Part 4: Complete exchange of CMYK and spot colour printing data using PDF 1.4 (PDF/X-1a) | |
| Graphic technology. Prepress digital data exchange using PDF. Part 6: Complete exchange of printing data suitable for colour-managed workflows using PDF 1.4 (PDF/X-3) | |
| Graphic technology. Prepress digital data exchange using PDF. Part 7: Complete exchange of printing data (PDF/X-4) and partial exchange of printing data with external profile reference (PDF/X-4p) using PDF 1.6... | |
| Graphic technology. Prints and printing inks. Assessment of resistance of prints to various agents | |
| Graphic technology. Process control for the production of half-tone colour separations, proof and production prints — Part 8: Validation print processes working directly from digital data | |
| Graphic technology. Process control for the production of half-tone colour separations, proof and production prints. Part 9: Metal decoration printing processes using offset lithography | |
| Graphic technology. Symbols for text proof correction. | |
| Graphic technology. Vocabulary. Part 2: Prepress terms | |
| Graphic technology. Vocabulary. Parte 4: Postpress terms. | |
| Graphical symbols - Public information symbols | |
| GRAVITY DRAINAGE SYSTEMS INSIDE BUILDINGS. PART 6: INSPECTION AND TESTING | |
| Guidance for the in-house preparation of quality control materials (QCMs) | |
| Guidance on social responsibility | |
| GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT | |
| Guidelines for implementation of statistical process control (SPC) -- Part 2: Catalogue of tools and techniques | |
| Health informatics - Identification of medicinal products - Methodology and framework for the development and representation of IDMP ontology (ISO/DTS 21405:2025) | |
| Health informatics - Measures for ensuring the patient safety of health software | |
| HEAT RESISTING STEELS AND ALLOYS | |
| Helmets for cyclists | |
| Hot finished steel structural hollow sections - Part 1: Technical delivery conditions | |
| Hot rolled and cold rolled non-coated flat products of multiphase steels for cold forming - Technical delivery conditions | |
| Hot rolled products of structural steels - Part 1: General (Characteristics, evaluation of conformity and marking) | |
| Hot rolled steel channels, I and H sections - Dimensions and masses | |
| Hot rolled steel sheet piling - Part 2: Tolerances on shape and dimensions | |
| Hot-finished steel structural hollow sections - Part 1: Technical delivery conditions | |
| Hot-rolled steel sheet piling - Part 1: Technical delivery conditions | |
| Household and similar electrical appliances - Safety -- Part 2-94: Particular requirements for scissor type grass shears | |
| Human resource management. Guidelines on human governance. | |
| Human resource management. Organizational culture metrics cluster. | |
| Hygrothermal performance of buildings - Resistance to wind - driven rain of roof coverings with discontinuously laid small elements - Test methods | |
| IDENTIFICATION CARD SYSTEMS. GENERAL CONCEPTS APPLYING TO SYSTEMS USING IC CARDS IN INTER-SECTOR ENVIRONMENTS. RULES FOR INTER-APPLICATION CONSISTENCY | |
| Imaging materials. Reflection prints. Storage practices | |
| Impact protection helmets for young children | |
| Information and documentation — International archives statistics | |
| Information and documentation — Issues and considerations for managing records in structured data environments | |
| Information and documentation — Records risks — Risk assessment for records management | |
| INFORMATION AND DOCUMENTATION - PAPER FOR DOCUMENTS - REQUIREMENTS FOR PERMANENCE | |
| Information and documentation -- Statistics on the production and distribution of books, newspapers, periodicals and electronic publications | |
| Information technology — Security techniques — Code of practice for information security controls based on ISO/IEC 27002 for cloud services | |
| Information technology -- Software life cycle processes (ISO/IEC 12207:1995/AMD1:2002 ) | |
| Information technology -- Software life cycle processes (ISO/IEC 12207:1995/AMD1:2004 ) | |
| INSTALLATIONS AND EQUIPMENT FOR LIQUEFIED NATURAL GAS. SUITABILITY TESTING OF FOAM CONCENTRATES DESIGNED FOR GENERATION OF MEDIUM AND HIGH EXPANSION FOAM AND OF EXTINGUISHING POWDERS USED ON LIQUEFIED NATURAL GAS... | |
| INSTALLATIONS AND EQUIPMENT FOR LIQUEFIED NATURAL GAS. TESTING OF INSULATING LININGS FOR LIQUEFIED NATURAL GAS RETENTION BUNDS | |
| Installed monitors for the control and detection of gamma radiations contained in recyclable or non-recyclable materials transported by vehicles | |
| INSTRUMENTATION TO BE USED IN ASSOCIATION WITH NON-ACTIVE SURGICAL IMPLANTS. GENERAL REQUIREMENTS. | |
| Insulating refractory products - Methods of test for ceramic fibre products | |
| Insulating refractory products - Part 1: Terminology for soluble high temperature fibre products | |
| Insulating refractory products - Part 1: Terminology, classification and methods of test for high temperature insulation wool products | |
| Insulating refractory products - Part 9: Methods of test for alkaline earth silicate (AES) wool products | |
| Insulating refractory products - Terminology for alkaline earth silicate (AES) wools | |
| INTERNATIONAL VOCABULARY OF BASIC AND GENERAL TERMS IN METROLOGY | |
| Letter symbols to be used in electrical technology -- Part 1: General | |
| Letter symbols to be used in electrical technology -- Part 2: Telecommunications and electronics | |
| LIGHT TRANSMITTING PROFILED PLASTIC SHEETING FOR SINGLE SKIN ROOFING-PART 2: SPECIFIC REQUIREMENTS AND TEST METHODS FOR SHEETS OF GLASS FIBRE REINFORCED POLYESTER RESIN (GPR) | |
| LIGHT TRANSMITTING PROFILED PLASTIC SHEETING FOR SINGLE SKIN ROOFING-PART 3: SPECIFIC REQUIREMENTS AND TEST METHODS FOR SHEETS OF POLYVINYL CHLORIDE (PVC). | |
| Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods | |
| Light transmitting skin profiled plastics sheeting for internal and external roofing, wall cladding and ceiling finishes - Part 1: General requirements and test methods | |
| Low-voltage electrical installations - Part 4-42: Protection for safety - Protection against thermal effects | |
| Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent | |
| Low-voltage electrical installations - Part 5: Selection and erection of electrical equipment - Clause 57: Stationary secondary batteries | |
| Low-voltage electrical installations - Part 7-702: Requirements for special installations or locations - Swimming pools and fountains | |
| Low-voltage electrical installations - Part 7-706: Requirements for special installations or locations - Conducting locations with restricted movement | |
| Low-voltage electrical installations - Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations | |
| Low-voltage electrical installations - Part 8-82: Functional aspects - Prosumer's low-voltage electrical installations | |
| Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) - Examples of standardized systems of fuses A to... | |
| Low-voltage fuses -- Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to I | |
| Low-voltage fuses -- Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) - Examples of standardized systems of fuses A to... | |
| Low-voltage fuses -- Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to... | |
| Low-voltage fuses -- Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications) - Examples of types of standardized of fuses A... | |
| LOW-VOLTAGE FUSES. PART 2-1: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION). SECTIONS I TO IV: EXAMPLES OF TYPES OF STANDARDIZED FUSES FOR USE... | |
| Machine tool spindles -- Evaluation of machine tool spindle vibrations by measurements on spindle housing -- Part 1: Spindles with rolling element bearings and integral drives operating at speeds between... | |
| Machine tools - Environmental evaluation of machine tools - Part 1: Design methodology for energy-efficient machine tools | |
| Machine tools -- Practical guidance and example of risk assessment on electro-discharge machines | |
| MACHINERY FOR FORESTRY. SELF-PROPELLED MACHINERY. SAFETY. | |
| Machines for mechanical processing of minerals and similar solid materials - Safety - Part 6: Specific requirements for mobile machinery | |
| Malleable cast iron fittings with compression ends for steel pipes | |
| Management systems for the United Nations Sustainable Development Goals SDGs — Implementation guidance | |
| Management Systems for UN Sustainable development goals – Requirements | |
| Management systems for United Nations Sustainable Development Goals (SDGs) — Requirements | |
| Manufacturers’ considerations for in vitro diagnostic medical devices in a public health emergency | |
| Marine energy - Wave, tidal and other water current converters - Part 1: Vocabulary | |
| Market, opinion and social research, including insights and data analytics — Vocabulary and service requirements | |
| Matting of insulating material for electrical purposes. | |
| MEASUREMENT OF NOISE EMISSION FROM COMPRESSORS AND VACUUM PUMPS (ENGINEERING METHOD) | |
| MEDICAL DEVICES. ESTIMATION OF THE POPULATION OF MICRO-ORGANISMS ON PRODUCT. PART 2: GUIDANCE. | |
| MEDICAL SUCTION EQUIPMENT. PART 1: ELECTRICALLY POWERED SUCTION EQUIPMENT. SAFETY REQUIREMENTS. | |
| MEDICAL SUCTION EQUIPMENT. PART 3: SUCTION EQUIPMENT POWERED FROM VACUUM OR PRESSURE SOURCE. | |
| Metallic materials - Drop weight tear test | |
| Metallic materials - Tensile testing - Tensile test on foils and strips of metals with a nominal thickness less than 0,200 mm by using computer-controlled testing machines | |
| METALLIC MATERIALS. TUBE RING HYDRAULIC PRESSURE TEST | |
| METALLIC MATERIALS. VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES. PART 2: TENSION CREEP TESTING MACHINES. VERIFICATION OF THE APPLIED LOAD. | |
| METHODS OF TEST FOR MORTAR. PART 14: DETERMINATION OF DURABILITY OF HARDENED MASONRY MORTARS (WITH CEMENT COMPRISING GREATER THAN 50% OF THE TOTAL BINDER MASS). | |
| Microbiology of food and animal feeding stuffs -- Horizontal method for the enumeration of beta-glucuronidase-p ositive Escherichia coli -- Part 2: Colony-count technique at 44 degrees C using 5-bromo-4-chloro-3-i ndolyl... | |
| Microbiology of food and animal feeding stuffs -- Horizontal method for the enumeration of beta-glucuronidase-p ositive Escherichia coli -- Part 3: Most probable number technique using 5-bromo-4-chloro-3-i ndolyl-beta-D-glucur onide | |
| Microbiology of food and animal feeding stuffs -- Horizontal methods for the detection and enumeration of Enterobacteriaceae -- Part 1: Detection and enumeration by MPN technique with pre-enrichment | |
| Microbiology of food and animal feeding stuffs -- Horizontal methods for the detection and enumeration of Enterobacteriaceae -- Part 2: Colony-count method | |
| Milk and milk products -- Detection of Enterobacter sakazakii | |
| Mineral insulating oils - Characterization of paraffinic/naphtheni c nature - Low temperature differential scanning calorimetry (DSC) test method. | |
| Multicore and multipair cable for installation above and below ground | |
| MULTICORE AND MULTIPAR CABLE FOR INSTALLATION ABOVE AND BELOW GROUND. | |
| Nanoparticles - Vocabulary | |
| NATURAL STONE. FINISHED PRODUCTS, DIMENSION STONE WORK. SPECIFICATIONS | |
| NON ACTIVE SURGICAL IMPLANTS. PARTICULAR REQUIREMENTS FOR CARDIAC AND VASCULAR IMPLANTS- PART 1: HEART VALVE SUBSTITUTES. | |
| NON ACTIVE SURGICAL IMPLANTS. PARTICULAR REQUIREMENTS FOR CARDIAC AND VASCULAR IMPLANTS. PART 2: VASCULAR PROSTHESES AND CARDIO VASCULAR PATCHES. | |
| NON ACTIVE SURGICAL IMPLANTS. PARTICULAR REQUIREMENTS FOR CARDIAC AND VASCULAR IMPLANTS. PART 3: VASCULAR STENTS AND VENA CAVA FILTERS. | |
| Non destructive testing - Code of practice for the approval of NDT personnel by recognised third party organisations under the provisions of Directive 97/23/EC | |
| NON-ACTIVE SURGICAL IMPLANTS. JOINT REPLACEMENT IMPLANTS. PARTICULAR REQUIREMENTS | |
| Non-Alloy steel tubes suitable for welding, threading and other joining methods - Requirements and test methods | |
| Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method) | |
| Non-destructive testing - Ultrasonic testing of steel flat product of thickness equal or greater than 5 mm (reflection method) | |
| NON-DESTRUCTIVE TESTING OF STEEL FORGINGS. PART 3: ULTRASONIC TESTING OF FERRITIC OR MARTENSITIC STEEL FORGINGS. | |
| NON-DESTRUCTIVE TESTING OF STEEL FORGINGS. PART 4: ULTRASONIC TESTING OF AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEEL FORGINGS. | |
| NON-DESTRUCTIVE TESTING OF STEEL TUBES. PART 14: AUTOMATIC ULTRASONIC TESTING FOR THE DETECTION OF LAMINAR IMPERFECTIONS FOR SEAMLESS AND WELDED (EXPECT SUBMERGED ARC-WELDED) STEEL TUBES. | |
| NON-INVASIVE SPHYGMOMANOMETERS. PART 3: SUPPLEMENTARY REQUIREMENTS FOR ELECTRO-MECHANICAL BLOOD PRESSURE MEASURING SYSTEMS | |
| Occupational health and safety management systems. Requirements with guidance for use | |
| OFFSHORE CONTAINERS - DESIGN, CONSTRUCTION, TESTING, INSPECTION AND MARKING | |
| OIL SPILL IDENTIFICATION | |
| OILSEEDS. SIMULTANEOUS DETERMINATION OF OIL AND MOISTURE CONTENTS. METHOD USING PULSED NUCLEAR MAGNETIC RESONANCE SPECTROMETRY | |
| Open die steel forgings for general engineering purposes - Part 3: Alloy special steels | |
| OPEN DIE STEEL FORGINGS FOR GENERAL ENGINEERING PURPOSES - PART 5: STAINLESS STEELS | |
| OPEN DIE STEEL FORGINGS FOR GENERAL ENGINEERING PURPOSES. PART 1: GENERAL REQUIREMENTS. | |
| OPERATING FORCES - TEST METHOD - PART 1: WINDOWS | |
| OVERHEAD DISTRIBUTION CABLES OF RATED VOLTAGE UO/U(UM): 0,6/1 (1,2) KV | |
| PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR MASONRY-PART 2-DETERMINATION AND CLASSIFICATION OF WATER-VAPOUR TRANSMISSION RATE | |
| PAINTS AND VARNISHES. COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR MASONRY. PART 3: DETERMINATION AND CLASSIFICATION OF LIQUID-WATER TRANSMISSION RATE. | |
| Paper and board intended to come into contact with foodstuffs - Determination of the transfer of antimicrobial constituents | |
| Paper and board. Determation of resistance to bending. Part 2: Taber-type tester | |
| Paper and board. Determination of roughness/smoothness (air leak methods). Part 4: Print-surf method | |
| Paper and board. Testing of cores. Part 9: Determination of the flat crush resistance | |
| Paper, board, pulps and related terms: Vocabulary. Part 5: Properties of pulp, paper and board | |
| Paper, boards and pulps. Measurement of diffuse radiance factor (diffuse reflectance factor) | |
| Passenger cars. Driver hand-control reach | |
| PLASTICS PIPING SYSTEMS - BRACKETS FOR RAINWATER PIPING SYSTEMS - TEST METHOD FOR BRACKET STRENGTH | |
| PLASTICS PIPING SYSTEMS FOR UNDERGROUND DRAINAGE AND SEWERAGE UNDER PRESSURE. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP). PART 7: ASSESSMENT OF CONFORMITY | |
| PLASTICS PIPING SYSTEMS. THERMOPLASTICS FITTINGS. TEST METHOD FOR IMPACT STRENGTH. | |
| PNE-ISO/IEC TR 29138-2 IN | |
| Postal services - Open standard interface between image controller and enrichment devices (OCRs, video coding systems, voting systems) | |
| Power cables having rated voltages from 3,6/6 (7,2) kV up to and including 20,8/36 (42) kV with special fire performance for use in power stations | |
| POWER CABLES WITH EXTRUDED INSULATION AND THEIR ACCESORIES FOR RATED VOLTAGES ABOVE 36 KV (UM = 42 KV) UP TO 150 KV (UM = 170 KV) | |
| Precast concrete products - Concrete finishes - Identification | |
| Precast concrete products - Hollow core slabs | |
| Prestressing steels - Part 3: Bars | |
| Prestressing steels - Protected and sheathed strands for prestressing - Part 1: General requirements | |
| Prestressing steels - Protected and sheathed strands for prestressing - Part 2: Sliding strands | |
| Prestressing steels - Protected and sheathed strands for prestressing - Part 3: Adherent strands | |
| Procedure for declaration of materials in products of the electrotechnical and electronics industry (DIN 19220) | |
| Production equipment for microsystems -- Interface between end effector and handling system | |
| PROTECTIVE CLOTHING. ELECTROSTATIC PROPOERTIES. PART 2: VERTICAL RESISTANCE (TEST METHOD) | |
| PULP - ESTIMATION OF DIRT AND SHIVES - PART 1: PULP MANUFACTURED IN SHEETS | |
| Pulps. Determination of lignin content. Acid hydrolysis method | |
| Pumps. Rotodynamic pumps. Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations. Part 1: General requirements, testing, marking | |
| Radiation protection instrumentation - Installed personnel surface contamination monitoring assemblies | |
| Radiation protection instrumentation - Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma and beta radiations - Direct reading personal dose equivalent and/or dose equivalent rate dosemeters | |
| RADIO EQUIPMENT AND SYSTEMS (RES). LAND MOBILE SERVICE. TECHNICAL CHARACTERISTICS AND TEST CONDITIONS FOR NON-SPEECH AND COMBINED ANALOGUE SPEECH/NON SPEECH EQUIPMENT WITH AN INTERNAL OR EXTERNAL ANTENNA CONNECTOR INTENDED FOR... | |
| Railway applications - Classification system for rail vehicles - Part 2: Product groups | |
| Railway applications - Designation systematic for rail vehicles - Part 4: Designation of installation sites and locations | |
| Railway applications - Designation systematic for railway vehicles - Part 1: General rules | |
| RAILWAY APPLICATIONS-AXLEBOX ES-LUBRICATING GREASES | |
| RAILWAY APPLICATIONS-AXLEBOX ES-PERFORMANCE TESTING | |
| RAILWAY APPLICATIONS-AXLEBOX ES-ROLLING BEARINGS | |
| RAILWAY COMPONENTS. TECHNICAL DELIVERY REQUIREMENTS. PART 3: STEEL SLEEPERS. | |
| RAPESEED. DETERMINATION OF GLUCOSINOLATES CONTENT. PART 2: METHOD BY X FLUORESCENCE | |
| RECIPROCATING INTERNAL COMBUSTION ENGINES. EXHAUST EMISSION MEASUREMENT. PART 3: DEFINITIONS AND METHODS OF MEASUREMENT OF EXHAUST GAS SMOKE UNDER STEADY-STATE CONDITIONS | |
| Recommendations for small renewable energy and hybrid systems for rural electrification - Part 7-1: Generators - Photovoltaic arrays | |
| Reference materials - Selected terms and definitions | |
| Refrigerants - Designation and safety classification | |
| RESPIRATORY PROTECTIVE DEVICES - NON-MASK MOUNTED FILTERS - PARTICLE FILTERS, GAS FILTERS AND COMBINED FILTERS - REQUIREMNTS, TESTING, MARKING | |
| RESPIRATORY PROTECTIVE DEVICES. COMPRESSED AIR FOR BREATHING APPARATYS | |
| Risk management — Guidelines for the management of legal risk | |
| Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 3: On-board transmitter simulation | |
| Road vehicles. 60 V and 600 V single-core cables. Part 2: Dimensions test methods and requirements for aluminium conductor cables. | |
| Road vehicles. Diagnostic systems. Keyword Protocol 2000. Part 2: Data link layer | |
| Road vehicles. H-point machine (HPM II). Specifications and procedure for H-point determination | |
| Road vehicles. Holding test of coatings influencing the colour of light emitted by light source(s). Test methods | |
| Road vehicles. Multi-core connecting cables. Part 3: Construction, dimensions and marking of unscreened sheathed low-voltabe cables | |
| Road vehicles. Roof load carriers | |
| Road vehicles. Specification of non-petroleum-base brake fluids for hydraulic systems | |
| Road vehicles. Symbols for controls, indicators and tell-tales | |
| Road vehicles. Vehicle dynamics test methods. Part 2: General conditions for heavy vehicles and buses. | |
| Road vehicles. Vehicle to grid communication interface. Part 1: General information and use-case definition | |
| RUBBER INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V. PART 14: CORDS FOR APPLICATIONS REQUIRING HIGH FLEXIBILITY. | |
| RUBBER INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V. PART 3: HEAT RESISTANT SILICONE RUBBER INSULATED CABLES. | |
| RUBBER INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V. PART 4: CORDS AND FLEXIBLE CABLES. | |
| RUBBER INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V. PART 7: CABLES WITH INCREASED HEAT RESISTANCE FOR INTERNAL WIRING FOR A CONDUCTOR TEMPERATURE OF 110 ºC. | |
| RUBBER INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V. PART 8: POLYCHLOROPRENE OR EQUIVALENT SYNTETIC ELASTOMETER SHEATHEDCABLE FOR DECORATIVE CHAINS. | |
| RUBBER INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V. PART 9: SINGLE CORE NON-SHEATHED CABLES FOR FIXED WIRING HAVING LOWEMISSION OF SMOKE AND CORROSIVE GASES. | |
| RUBBER INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750V. PART 6: ARC WELDING CABLES. | |
| RUBBER INSULATED CABLES OF RATED VOLTGS UP TO AND INCLUDING 450/750 V. PART 1: GENERAL REQUIREMENTS. | |
| Rubber, vulcanised or thermoplastic. Resistance to ozone cracking. Part 1: Static and dynamic strain testing | |
| Rubber, vulcanized or thermoplastic. Accelerated ageing and heat resistance tests. | |
| Rubber, vulcanized or thermoplastic. Determination of density | |
| Rubber, vulcanized or thermoplastics. Determination of tear strength. Part 1. Trouser, angle and crescen test pieces | |
| Rubber. Determination of solvent extract | |
| Rubber. Identification. Infrared spectrometric methods | |
| Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Part 2: Fuel/air ratio control / supervision of the electronic... | |
| SAFETY DATA SHEET FOR CHEMICAL PRODUCTS. PART 1: CONTENT AND ORDER OF SECTIONS | |
| Safety of escalators and moving walks - Part 5: Replacement of existing escalators/moving walks in existing buildings | |
| SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 9:POLLUTANT CONCENTRATION PARAMETER - ROOM METHOD | |
| SAFETY OF MACHINERY. EVALUATION OF THE EMISSION OF AIRBORME HAZARDOUS SUBSTANCES. PART 6: MEASUREMENT OF THE SEPARATION EFFICIENCY BY MASS. UNDUCTED OUTLET | |
| SAFETY OF MACHINERY. EVALUATION OF THE EMISSION OF AIRBORME HAZARDOUS SUBSTANCES. PART 7: MEASUREMENT OF THE SEPARATION EFFICIENCY BY MASS. DUCTED OUTLET | |
| SAFETY OF MACHINERY. EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES FROM MACHINES. PART 8: POLLUTANT CONCENTRATION PARAMETER. TEST BENCH METHOD | |
| SAFETY OF MACHINERY. SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES. PART 3: WINDERS AND SLITTERS, PLYING MACHINES. | |
| SAFETY OF MACHINERY. TERMINOLOGY. | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-010: Conformity verification report for IEC 61010-2-010, Particular requirements for laboratory equipment for the heating of materials. | |
| Safety rules for the construction and installation of escalators and moving walks | |
| Sampling procedures for inspection by variables -- Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a... | |
| Sanitary Tapware - Thermostatic Mixing Valves (PN 10) - General Technical Specification | |
| SECURE STORAGE UNITS. CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE. PART 2: DATE ROOMS AND DATA CONTAINERS. | |
| Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 1: Definitions, information and general principles | |
| Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 2: Ceramic and glass insulators for a.c. systems | |
| Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 3: Polymer insulators for AC systems | |
| Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 4: Insulators for d.c. systems | |
| Sensory analysis. General guidance for the design of test rooms. | |
| Service excellence — Implementation approach for ISO 23592 | |
| Service excellence. Principles and model for public service organizations. | |
| SINTERED METAL BUSHES. DETERMINATION OF RADIAL CRUSHING STRENGTH | |
| Size Weighted Respirable Fraction - SweRF and Size Weighted Respirable Fraction of Crystalline Silica - SWeRFcs | |
| Software engineering — Guidelines for the application of ISO 9001:2015 to computer software | |
| Soil quality -- Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography. | |
| Soil quality -- Determination of polycyclic aromatic hydrocarbons (PAH) -- Gas chromatographic method with mass spectrometric detection (GC-MS) | |
| Soil quality -- Sampling -- Part 3: Guidance on safety | |
| Soil quality. Determination of particle size distribution in mineral soil material. Method by sieving and sedimentation. | |
| SOLID FERTILIZARS - DETERMINATION OF STATIC ANGLE OF REPOSE | |
| SOLID FERTILIZERS- DETERMINATION OF MOISTURE CONTENT-GRAVIMETRIC METHOD BY DRYING AT 105 + 2 º C | |
| SOLID FERTILIZERS- DETERMINATION OF MOISTURE CONTENT-GRAVIMETRIC METHOD BY DRYING UNDER REDUCED PRESSURE | |
| Space Data System Practices — Reference model for an open archival information system (OAIS) | |
| SPACE ENGINEERING. POLICY AND PRINCIPLES | |
| SPACE ENGINEERING. SOFTWARE | |
| SPACE ENGINEERING. VERIFICATION | |
| SPACE PRODUCT ASSURANCE. POLICY AND PRINCIPLES | |
| SPACE PROJECT ASSURANCE. MATERIALS, MECHANICAL PARTS AND PROCESSES | |
| SPACE PROJECT ASSURANCE. QUALITY ASSURANCE | |
| SPACE PROJECT MANAGEMENT. CONFIGURATION MANAGEMENT | |
| SPACE PROJECT MANAGEMENT. COST AND SCHEDULE MANAGEMENT | |
| SPACE PROJECT MANAGEMENT. INFORMATION/DOCUMENT ATION MANAGEMENT. | |
| SPACE PROJECT MANAGEMENT. POLICY AND PRINCIPLES | |
| SPACE PROJECT MANAGEMENT. PROJECT BREAKDOWN STRUCTURES | |
| SPACE PROJECT MANAGEMENT. PROJECT ORGANIZATION | |
| SPACE PROJECT MANAGEMENT. PROJECT PHASING AND PLANNING | |
| SPACE SYSTEMS. GLOSSARY OF TERMS | |
| SPECIFIC FUNCTIONAL REQUIREMENTS FOR THE MATERIALS, DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE AND RENOVATION OF GAS SUPPLY SYSTEMS UP TO AND INCLUDING 16 BAR. PART 1: POLYETHYLENE SYSTEMS UP TO AND INCLUDING... | |
| SPECIFIC FUNCTIONAL REQUIREMENTS FOR THE MATERIALS, DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE AND RENOVATION OF GAS SUPPLY SYSTEMS UP TO AND INCLUDING 16 BAR. PART 2: STEEL-SYSTEMS UP TO AND INCLUDING 16... | |
| Spices and condiments. Preparation of ground sample for analysis. | |
| Stainless steel plumbing fittings - Fittings with press ends for metallic tubes | |
| STANDARD ATMOSPHERES FOR CONDITIONING AND/OR TESTING. SPECIFICATIONS | |
| Station Service Voltage Transformers (SSVT) | |
| Stationary source emissions. Manual determination of mass concentration of particulate matter | |
| Statistical interpretation of data -- Tests and confidence intervals relating to proportions | |
| Statistical methods in process management -- Capability and performance -- Part 4: Process capability estimates and performance measures | |
| STEEL AND NICKEL ALLOYS FOR FASTENERS FOR USE AT ELEVATED AND/OR LOW TEMPERATURES. | |
| STEEL CASTINGS FOR STRUCTURAL AND GENERAL ENGINEERING USES - PART 1: GENERAL | |
| STEEL CASTINGS FOR STRUCTURAL AND GENERAL ENGINEERING USES - PART 2: STEEL CASTINGS FOR STRUCTURAL USES | |
| STEEL CASTINGS FOR STRUCTURAL AND GENERAL ENGINEERING USES - PART 3: STEEL CASTINGS FOR GENERAL ENGINEERING USES | |
| Steel castings for structural uses - Part 1: General | |
| Steel castings for structural uses - Part 2: Technical delivery conditions | |
| Steel for the reinforcement of concrete - Galvanized reinforcing steel | |
| Steel for the reinforcement of concrete - Stainless steel | |
| Steel for the reinforcement of concrete - Weldable reinforcing steel - General | |
| STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - PART 2: TECHNICAL DELIVERY CONDITIONS FOR CLASS A. | |
| STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - PART 3: TECHNICAL DELIVERY CONDITIONS FOR CLASS B. | |
| STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - PART 4: TECHNICAL DELIVERY CONDITIONS FOR CLASS C. | |
| STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - PART 5: TECHNICAL DELIVERY CONDITIONS FOR WELDED FABRIC. | |
| STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - PART 6: TECHNICAL DELIVERY CONDITIONS FOR LATTICE GIRDERS. | |
| STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS. TECHNICAL DELIVERY CONDITIONS. PART 3: PIPES OF REQUIREMENTS CLASS C. | |
| Steel structural hollow sections - General (Characteristics, evaluation of conformity and marking) | |
| STEEL TUBES AND FITTINGS FOR ON AND OFFSHORE PIPELINES. EXTERNAL FUSED POLYETHYLENE BASED COATINGS. | |
| STEEL TUBES AND FITTINGS FOR ON AND OFFSHORE PIPELINES. EXTERNAL THREE LAYER EXTRUDED POLYETHYLENE BASED COATING. | |
| STEEL TUBES AND FITTINGS FOR ON AND OFFSHORE PIPELINES. EXTERNAL THREE LAYER EXTRUDED POLYPROPYLENE BASED COATING. | |
| STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL EPOXY POWDER COATING. | |
| STEEL. CONVERSION OF ELONGATION VALUES. PART 1: CARBON AND LOW ALLOY STEELS. | |
| STEEL. CONVERSION OF ELONGATION VALUES. PART 2: AUSTENITIC STEELS. | |
| STEEL. HARDENABILITY TEST BY END QUENCHING (JOMINY TEST) | |
| STERILE SINGLE-USE INTRAVASCULAR CATHETER INTRODUCERS | |
| STRUCTURAL STEEL EQUAL AND UNEQUAL LEG ANGLES. PART 1: DIMENSIONS. | |
| Sustainability in building construction -- Sustainability indicators -- Part 1: Framework for the development of indicators and a core set of indicators for buildings | |
| Systems engineering. System life cycle processes. (ISO/IEC 15288:2002) | |
| TECHNICAL DRAWINGS. SIMPLIFIED REPRESENTATION OF CENTRE HOLES | |
| Technical systems and aids for disabled or handicapped persons -- Wheelchair tiedown and occupant-restraint systems -- Part 1: Requirements and test methods for all systems | |
| Technical systems and aids for disabled or handicapped persons -- Wheelchair tiedown and occupant-restraint systems -- Part 2: Four-point strap-type tiedown systems | |
| Terminology work — Principles and methods. | |
| Terminology work and terminology science. Vocabulary. | |
| Test conditions for die sinking electro-discharge machines (die sinking EDM) -- Testing of the accuracy -- Part 1: Single-column machines (cross-slide table type and fixed-table type) | |
| Test conditions for die sinking electro-discharge machines (die sinking EDM) -- Testing of the accuracy -- Part 2: Double-column machines (slide-head type) | |
| Test conditions for machining centres — Part 2: Geometric tests for machines with vertical spindle (vertical Z-axis) | |
| Test conditions for machining centres — Part 7: Accuracy of finished test pieces | |
| Test conditions for machining centres -- Part 6: Accuracy of speeds and interpolations | |
| Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table -- Testing of the accuracy -- Part 1: Machines with table length of up to 1... | |
| Test for mechanical and physical properties of aggregates. Part 5: Determination of the water content by drying in a ventilated oven. | |
| Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV -- Part 2: Cables with impregnated paper insulation | |
| Testing hardened concrete - Part 11: Determination of the chloride resistance of concrete, unidirectional diffusion | |
| Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation | |
| Tests for mechanical and physical properties of aggregates - Part 8: Determination of the polished stone value | |
| TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES. PART 3: DETERMINATION OF LOOSE BULK DENSITY AND VOIDS. | |
| TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES. PART 4: DETERMINATION OF THE VOIDS OF DRY COMPACTED FILLER | |
| TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES. PART 7: DETERMINATION OF THE PARTICLE DENSITY OF FILLER. PYKOMETER METHOD | |
| TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES. PART 8: DETERMINATION OF THE POLISHED STONES VALUES. | |
| TESTS ON OIL-FILLED (FLUID FILLED), PAPER- AND PPL-INSULATED, METAL-SHEATHED CABLES AND ACCESORIIES FOR ALTERNATING VOLTAGES UP TO AND INCLUDING 400 KV (UM = 420 KV). | |
| Tests requirements for accessories for power cables with rated voltage from 3,6/6 (7,2) kV up to and including 20,8/36 (42) kV -- Part 2 : Cables with impregnated paper insulation... | |
| TEXTILES - TESTS FOR COLOUR FASTNESS - PART B06: COLOUR FASTNESS TO ARTIFICIAL LIGHT AT HIGH TEMPERATURES: XENON ARCFADING LAMP TEST | |
| Textiles. Man-made fibres. Generic names. | |
| THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS. DETERMINATION OF LONG TERM WATER ABSORPTION BY IMMERSION | |
| Thermal solar systems and components - Custom built systems - Part 1: General requirements for solar water heaters and combisystems | |
| Thermal solar systems and components - Custom built systems - Part 2: Test methods for solar water heaters and combisystems | |
| Thermal solar systems and components - Custom built systems - Part 4: Performance test methods for solar combistores | |
| Thermal solar systems and components - Custom built systems - Part 5: Performance test methods for control equipment | |
| Timber blanks and semi-finished profiles for non-structural uses - Part 2: Production control | |
| TIMBER STRUCTURES - TEST METHODS - JOINTS MADE OF PUNCHED METAL PLATE FASTENERS | |
| TOLERANCES IN BUILDING. TERMINOLOGY, PRINCIPLES, APPLICATION, TESTING | |
| Tourism and related services — Semantics applied to tourism destinations. | |
| Transformer bushings dimensional standardization - Part 1: Medium voltage bushings with Um from 12 kV up to and including 52 kV and Ir from 630 A up to and including... | |
| Tyres (ply rating marked series) and rims for agricultural tractors and machines -- Part 1: Tyre designation and dimensions, and approved rim contours | |
| ULTRASONIC TESTING OF STEEL FLAT PRODUCTS OF THICKNESS EQUAL TO OR GREATER THAN 6 MM (REFLECTION METHOD). | |
| Unalloyed steel plumbing fittings - Fittings with press ends for unalloyed steel tubes | |
| WALL HUNG HAND RINSE BASINS. CONNECTING DIMENSIONS. | |
| Water quality — Vocabulary | |
| Water slides - Part 1: Safety requirements and test methods | |
| Water slides - Part 2: Instructions | |
| WATER SLIDES OF 2 M HEIGHT AND MORE. PART 2: INSTRUCTIONS | |
| Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification (ISO/DIS 24373:2006) | |
| WELDING CONSUMABLES. TUBULAR CORED ELECTRODES FOR GAS SHIELDED METAL ARC WELDING OF CREEP-RESISTING STEELS. CLASSIFICATION. | |
| WELDING CONSUMABLES. TUBULAR CORED ELECTRODES FOR METAL ARC WELDING WITH OR WITHOUT A GAS SHIELD OF STAINLESS AND HEAT-RESISTING STEELS. CLASSIFICATION. | |
| WELDING CONSUMABLES. WIRE ELECTRODES, WIRES AND RODS FOR ARC WELDING OF CREEP-RESISTING STEELS. CLASSIFICATION. | |
| WELDING CONSUMABLES. WIRE ELECTRODES, WIRES AND RODS FOR ARC WELDING OF STAINLESS AND HEAT-RESISTING STEELS. CLASSIFICATION. | |
| Wheelchairs -- Part 19: Wheeled mobility devices for use in motor vehicles | |
| Windows and doors - Resistance to repeated opening and closing - Test method | |
| Wood-based panels - Determination of formaldehyde release - Extraction method (called the perforator method) | |
| ZERO GOVERNORS FOR GAS BURNING APPLIANCES | |
| Zinc and zinc alloy coated prestressing steel wires and strands | |
| ZINC AND ZINC ALLOYS. METHOD OF SAMPLING. SPECIFICATIONS | |
| ZINC AND ZINC ALLOYS. OPTICAL EMISSION SPECTROMETRIC ANALYSIS | |
| ZINC OR ZINC ALLOY COATED LOW CARBON STEEL WIRE FOR ARMOURING CABLES. PART 1: LAND CABLES. | |
| ZINC OR ZINC ALLOY COATED LOW CARBON STEEL WIRE FOR ARMOURING CABLES. PART 2: SUBMARINE CABLES. |
| << Prev | Next >> |