AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO/FDIS 10140-4:2016) | |
| Active wideband equipment for cable networks with digital signals only | |
| Adjustable speed electrical power drive systems (PDS) - Part 9-1: Ecodesign for motor systems - General requirements for setting energy efficiency standards | |
| Alarm and electronic security systems - Part 7-9: Message formats and protocols for serial data interfaces in alarm transmission systems - Requirements for common protocol for alarm transmission using the... | |
| Application of capacitors, resistors, inductors and complete filter units for electromagnetic interference suppression - General rules and safety requirements | |
| Arc welding equipment - Part 12: Coupling devices for welding cables | |
| Arc welding equipment - Part 1: Welding power sources | |
| Artificial Intelligence enabled Medical Devices - Computer assisted analysis software for pulmonary images - Algorithm performance test methods | |
| Assessment of circular content in products - Part 3: Proportion of recycled materials (Proposed Horizontal Publication) | |
| Asset administration shell for industrial applications - Part 4:Applications of Asset Administration Shell | |
| Assistive listening devices and systems for active assisted living | |
| Audio archive system - Part 1-1: DVD disk and data migration for long-term audio data storage | |
| Audio archive system - Part 1-2 : BD disk and data migration for long-term audio data storage | |
| Audio, video and information technology equipment - Routine electrical safety testing in production | |
| Audio/video, information and communication technology equipment - Safety - DC power transfer between ICT equipment ports using ICT wiring and cables at = 60 v DC | |
| Audio/video, information and communication technology equipment - Safety - DC power transfer between ICT equipment ports using ICT wiring and cables at voltages not exceeding 60 v DC | |
| Automatic electrical controls - Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level sensing controls | |
| Automatic electrical controls - Part 2-22: Particular requirements for thermal motor protectors | |
| Automatic electrical controls - Part 2-24: Particular requirements for displacement electrical controls | |
| Automatic electrical controls - Part 2-25: Particular requirements for current sensing controls | |
| Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems | |
| Automatic electrical controls - Part 2-7: Particular requirements for timers and time switches | |
| Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls | |
| Automatic electrical controls for household and similar use - Part 2-10: Particular requirements for motor-starting relays | |
| Automatic electrical controls for household and similar use - Part 2-3: Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps | |
| Automatic floor treatment machines for commercial use - Particular requirements | |
| Building intercom systems - Part 1-2: System requirements - Building intercom systems using the internet protocol (IP) | |
| Cable management - Cable tray systems and cable ladder systems | |
| Cable management systems - Cable ties for electrical installations | |
| Capacitors for high-voltage alternating current circuit-breakers - Part 1: General and grading capacitors | |
| CDD Database - Circuit-breakers and similar equipment for household use | |
| Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica (ISO 10058-1:2008) | |
| Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 2: Wet chemical analysis (ISO 10058-2:2008) | |
| Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)... | |
| Classification of environmental conditions - Part 2: Environmental conditions appearing in nature - Section 5: Dust, sand, salt mist | |
| Classification of environmental conditions. Part 3: Classification of groups of environmental parameters and their severities. Introduction | |
| Commissioning of electrical, instrumentation and control systems in the process industry - Specific phases and milestones | |
| Communication networks and systems for power utility automation - Part 7-400: Basic communication structure - Compatible logical node classes and data object classes - Substation automation | |
| Communication networks and systems for power utility automation - Part 7-401: Basic communication structure - Compatible logical node classes and data object classes - Protection | |
| Communication networks and systems for power utility automation - Part 7-40: Basic communication structure - Compatible logical node classes and data object classes - Common | |
| Communication networks and systems for power utility automation - Part 7-410: Basic communication structure - Hydroelectric power plants - Communication for monitoring and control | |
| Communication networks and systems for power utility automation - Part 7-43: Basic communication structure - Compatible logical node classes and data object classes - Primary equipment | |
| Communication networks and systems for power utility automation - Part 7-440: Basic communication structure - Compatible logical node classes and data object classes - Power quality metering | |
| Communication networks and systems for power utility automation - Part 7-44: Basic communication structure - Compatible logical node classes and data object classes - Instrument transformers | |
| Communication networks and systems for power utility automation - Part 7-4: Basic communication structure - Compatible logical node classes and data object classes | |
| Components for low-voltage surge protection - Part 322: Selection and application principles for silicon PN-junction voltage limiters | |
| Concentrator photovoltaic (CPV) modules and assemblies - Safety qualification | |
| Conductive charging of electric vehicles - Contact interface for automated connection device (ACD) | |
| Conductive power and energy transfer systems for electric vehicles - Part 1: General system and specific mode 3 EV charging station requirements | |
| Conductive power and energy transfer systems for electric vehicles - Part 21-1: Electric vehicle on-board charger EMC requirements for conductive connection to AC/DC supply | |
| Conductive power and energy transfer systems for electric vehicles - Part 23-3: DC electric vehicle supply equipment for megawatt charging systems | |
| Connectors for electrical and electronic equipment - Detail specification for shielded, free and fixed circular connectors m12 to m40 for power, signal and data transmission with frequencies up to 600... | |
| Connectors for electrical and electronic equipment - Part 1: Detail specification for 2-way, shielded or unshielded, free and fixed connectors - Mechanical mating information, pin assignment and additional requirements for... | |
| Connectors for electrical and electronic equipment - Product requirements - Part 2-118: Circular connectors - Detail specification for shielded and unshielded, free and fixed connectors with bayonet-locking size B12, B17,... | |
| Connectors for electrical and electronic equipment - Product requirements - Part 8–103: Power connectors - Detail specification for 2P+PE circular connectors with 20 A rated current and push-pull locking IP65/IP67... | |
| Connectors for electrical and electronic equipment - Product requirements - Part 8-104: Power connectors - Detail specification for 2-pole circular connectors with 40 A rated current and push-pull locking IP65/IP67... | |
| Connectors for electrical and electronic equipment - Product requirements - Part 8-105: Power connectors - Detail specification for 2-pole snap locking rectangular power connectors with plastic housing for rated current... | |
| Connectors for electrical and electronic equipment - Product requirements - Part 8-106: Power connectors - Detail specification for 2-poles push-pull coupling rectangular connectors with fuses, for rated voltage of 400... | |
| Connectors for electrical and electronic equipment - Product requirements - Part 8-107: Power connectors - Detail specification for 2P 200 A, 1 000 V plus 2P 5 A 50 V... | |
| Connectors for electrical and electronic equipment - Product requirements - Part 8-108: Power connectors - Detail specification for 2P 250 A, 1 000 V plus 2P 5 A 50 V... | |
| Connectors for electrical and electronic equipment - Product requirements - Part 8-109: Power connectors - Detail specification for 2P 130 A, 1 000 V plus 2P 5 A 50 V... | |
| Cooking fume extractors - Methods for measuring the capture efficiency | |
| Cooperative multiple systems in connected home environments - AAL functional safety requirements of electronic safety-related systems | |
| Determination of certain substances in electrotechnical products - Part 10: Polycyclic aromatic hydrocarbons (PAHs) in polymers and electronics by gas chromatography-mass spectrometry (GC-MS) | |
| Determination of certain substances in electrotechnical products - Part 13: Bisphenol a in plastics by liquid chromatography-diode array detection (LC-DAD), liquid chromatography-mass spectrometry (LC-MS) and liquid chromatography-tande m mass spectrometry... | |
| Determination of certain substances in electrotechnical products - Part 14: Short-chain chlorinated paraffins (SCCPs) and medium-chain chlorinated paraffins (MCCPs) in plastics by gas chromatography-negat ive chemical ionization-mass spectrometry (GC-NCI-MS) | |
| Determination of certain substances in electrotechnical products - Part 3-1: Screening - Lead, mercury, cadmium, total chromium total bromine, total phosphorus, total chlorine, total tin and total antimony content by... | |
| Determination of certain substances in electrotechnical products - Part 3-2: Screening - Fluorine, chlorine and bromine in polymers and electronics by combustion-ion chromatography (C-IC) | |
| Determination of certain substances in electrotechnical products - Part 8: Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS), gas chromatography-mass spectrometry using a pyrolyzer/thermal desorption accessory (Py-TD-GC-MS) | |
| Determination of power losses in high-voltage direct current (HVDC) converter stations | |
| Devices for the connection of luminaires for household and similar purposes - Part 1: General requirements | |
| Devices for the connection of luminaires for household and similar purposes - Part 2: Standard sheets for DCL | |
| Dielectric and resistive properties of solid insulating materials - Part 2-1: Relative permittivity and dissipation factor - Technical Frequencies (0,1 Hz - 10 MHz) - AC Methods | |
| Digital addressable lighting interface - Part 225: Particular requirements for control gear - Adaptive emergency escape lighting (device type 24) | |
| Dispositifs d’interconnexion et composants passifs fibroniques - Procédures fondamentales d’essais et de mesures - Partie 3-52: Examens et mesurages - Constante de déformation de l’alésage de guidage et de la... | |
| E-Transporters - Part 2-2: Safety requirements and test methods for autonomous cargo e-Transporters | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-16: Particular requirements for hand-held fastener driving tools | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-22: Particular requirements for hand-held cut-off machines | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-24: Particular requirements for hand-held oscillating multifunction tools | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-25: Particular requirements for hand-held chain beam saws | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-15: Particular requirements for transportable magnetic drills | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-17: Particular requirements for transportable table masonry saws | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-3: Particular requirements for transportable planers and thicknessers | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-8: Particular requirements for transportable single spindle vertical moulders | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-10: Particular requirements for pole-mounted pruners | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-11: Particular requirements for edgers | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-4: Particular requirements for lawn trimmers, lawn edge trimmers, grass trimmers, brush cutters and brush... | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-9: Particular requirements for battery-powered chain saws for tree service | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-9: Particular requirements for chain saws for tree service | |
| Electric motor-operated tools - Dust measurement procedure - Part 1: General requirements | |
| Electric Motor-Operated Tools - Dust Measurement Procedure - Part 2-1: Particular requirements for hand-held core drills | |
| Electric motor-operated tools - Dust measurement procedure - Part 2-6: Particular requirements for hand-held hammers | |
| Electric vehicle conductive charging system - Part 23-1: DC charging with an automatic connection system | |
| Electric vehicle conductive charging system - Part 23: DC electric vehicle supply equipment | |
| Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 GHz) - Part 2: Arc welding equipment | |
| Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs) | |
| Electrical and electronic household and office equipment - Measurement of networked standby power of edge equipment | |
| Electrical energy storage (EES) systems - Part 4-4: Standard on environmental issues battery-based energy storage systems (BESS) with reused batteries - requirements | |
| Electrical energy storage (EES) systems - Part 5-2: Safety requirements for grid-integrated EES systems - Electrochemical-base d systems | |
| Electrical energy storage (EES) systems - Part 5-3: Safety requirements for grid-integrated EES systems - Performing unplanned modification of electrochemical based system | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-7: Particular requirements - Test configurations, operational conditions, test levels and performance criteria for devices with Ethernet-APL... | |
| Electrical insulation systems - Procedures for thermal evaluation - Part 33: Multifactor evaluation with increased ageing factors at elevated temperature | |
| Electrical insulation systems - Procedures for thermal evaluation - Part 41: Specific requirements for electrical insulation systems for use in dry-type high-voltage transformers with operating voltages of 1kV and above... | |
| Electrical measuring transducers for converting AC and DC electrical quantities to analogue or digital signals | |
| Electrical relays - Tests and measurements - Part 0: General and guidance | |
| Electrical relays - Tests and measurements - Part 19: Electrical endurance | |
| Electrical relays - Tests and measurements - Part 41: Insulation coordination | |
| Electrical relays - Tests and measurements - Part 46: Impulse voltage test | |
| Electrical resistance trace heating systems for industrial and commercial applications - Part 1: General and testing requirements | |
| Electrical resistance trace heating systems for industrial and commercial applications - Part 2: Application guide for system design, installation and maintenance | |
| Electrical safety in low voltage distribution systems up to 1 000 v AC and 1 500 v DC - Equipment for testing, measuring or monitoring of protective measures - Part... | |
| Electrically operated food preparation appliances - Methods for measuring the performance | |
| Electricity metering data exchange - The DLMS/COSEM suite - Part 8-11: Communication profile for Wi-SUN field area mesh networks | |
| Electricity metering equipment - Dependability - Part 32-1: Durability - Testing of the stability of metrological characteristics by applying elevated temperature | |
| Electroacoustics - Measurement microphones - Part 9: Specifications for transfer standard microphones | |
| Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests | |
| Electronic railway equipment - On board driving data recording system - Part 3: Audio and video recording | |
| Electronic railway equipment - Train communication network (TCN) - Part 2-5: Ethernet train backbone | |
| Electronic railway equipment - Train communication network (TCN) - Part 2-6: Train-to-ground communication | |
| Endurance test methods for die attach materials - Part 5: Temperature cycling test methods for die attach materials (system soldering interconnection) applied to module type power electronic devices | |
| Energy efficiency - Customer energy management systems - Part 2-2: Data model and messaging - Interface between the customer energy manager and resource manager(s) (Proposed horizontal publication) | |
| Enterprise-control system integration - Part 4: Objects models attributes for manufacturing operations management integration | |
| Equipment for general lighting purposes - EMC immunity requirements | |
| Fatigue assessment of hydraulic turbine runners: from design to quality assurance | |
| Fault tree analysis (FTA) | |
| Fibre optic connector interfaces - Part 2: Type BFOC/2,5 connector family | |
| Fibre optic interconnect devices and passive components - Basic test and measurement procedures - Part 3-48: Examinations and measurements - Spring compression force of the coupling sleeve for rectangular ferrule... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-21: Tests - Composite temperature/humidity cyclic test | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-24: Tests - Screen testing of ceramic alignment split sleeve by stress application | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-2: Tests - Mating durability | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-37: Tests - Cable bending for fibre optic protective housings and hardened connectors | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-50: Tests - Fibre optic connector proof test with static load | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-58: Tests - Resistance test of immersion cooling environments | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-27: Examinations and measurements - Guide-hole and fibre hole/core position of rectangular ferrules | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-30: Examinations and measurements - Endface geometry of rectangular ferrule | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-3: Examinations and measurements - Active monitoring of changes in attenuation and return loss | |
| Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 2-4: Connection parameters of non-dispersion shifted single-mode physically contacting fibres - Non-angled for reference connection applications | |
| Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-7: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Non-angled 2,5 mm and 1,25... | |
| Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-8: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Angled 2,5 mm and 1,25... | |
| Fibre optic interconnecting devices and passive components - Connector optical interfaces for enhanced macrobend multimode fibres - Part 3-1: Connector parameters of physically contacting 50 µm core diameter fibres -... | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 38:Type SEN connector family | |
| Fibre optic interconnecting devices and passive components - Fibre optic isolators - Part 1: Generic specification | |
| Fibre optic interconnecting devices and passive components - Fibre optic spatial switches - Part 1: Generic specification | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 021-03: Single-mode fibre optic connectors terminated as pigtails and patchcords for category OP - Outdoor protected environment | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 022-02: Multimode fibre optic connectors terminated as pigtails and patchcords for category C - Controlled environment | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 022-13: Multimode fibre optic connectors terminated as pigtails and patchcords for category OP+ HD- Extended outdoor protected environment... | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 042-02: Plug-pigtail-style and plug-receptacle-styl e OTDR reflecting devices for category C - Controlled environments | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 382-2: Non-connectorized single-mode bidirectional g-pon-nga WWDM devices for category c - Controlled environment | |
| Fibre optic interconnecting devices and passive components - Performance standard for railway rolling stock application - Part 1: General and guidance | |
| Fibre ropes - High modulus polyethylene - 8-strand braided ropes, 12-strand braided ropes and covered ropes (ISO/DIS 10325:2025) | |
| FIBRE-REINFORCED PLASTICS - MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF MASS PER UNIT AREA (ISO/DIS 10352:1996) | |
| FINANCIAL TRANSACTION CARDS. SECURITY ARCHITECTURE OF FINANCIAL TRANSACTION SYSTEMS USING INTEGRATED CIRCUIT CARDS. PART 3: CRYPTOGRAPHIC KEY RELATIONSHIPS (ISO/DIS 10202-3:1995) | |
| FINANCIAL TRANSACTION CARDS. SECURITY ARCHITECTURE OF FINANCIAL TRANSACTION SYSTEMS USING INTEGRATED CIRCUIT CARDS. PART 6: CARDHOLDER VERFIFICATION (ISO 10202-6:1994) | |
| Fire hazard testing - Part 1-12: Guidance for assessing the fire hazard of electrotechnical products - Fire safety engineering | |
| Fire hazard testing - Part 1-14: Guidance on the different levels of power and energy related to the probability of ignition and fire in low voltage electrotechnical products | |
| Fire hazard testing - Part 11-2: Test flames - 1 kw pre-mixed flame - Apparatus, confirmatory test arrangement and guidance | |
| Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure | |
| Fire hazard testing - Part 5-2: Corrosion damage effects of fire effluent - Summary and relevance of test methods | |
| Fixed accessories intended for household and similar purposes that supply power through an interface | |
| Fixed folding durability test method for flexible opto-electric circuit boards | |
| FLUID FERTILIZERS. DE-AERATION OF SUSPENSION SAMPLES BY FILM DISENTRAINMENT (ISO 10248:1996) | |
| FLUID FERTILIZERS. PRELIMINARY VISUAL EXAMINATION AND PREPARATION OF SAMPLES FOR PHYSICAL TESTING (ISO 10249:1996) | |
| FREIGHT CONTAINERS. AUTOMATIC IDENTIFICATION (ISO 10374:1991) | |
| Fully flexible organic light emitting diode (OLED) panels for general lighting - Performance requirements | |
| Functional safety of electrical/electroni c/programmable electronic safety-related systems - Part 1: General requirements | |
| Functional safety of electrical/electroni c/programmable electronic safety-related systems - Part 2: Requirements for electrical/electroni c/programmable electronic safety-related systems | |
| Functional safety of electrical/electroni c/programmable electronic safety-related systems - Part 3: Software requirements | |
| Functional safety of electrical/electroni c/programmable electronic safety-related systems - Part 4: Definitions and abbreviations | |
| Functional safety of electrical/electroni c/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels | |
| Functional safety of electrical/electroni c/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (see Functional Safety and IEC 61508) | |
| Functional safety of electrical/electroni c/programmable electronic safety-related systems - Part 7: cc | |
| Gas cylinders - Gases and gas mixtures - Determination of toxicity for the selection of cylinder valve outlets (ISO/DIS 10298:2025) | |
| General guidance on reuse and repurposing of secondary cells and batteries | |
| Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 11: CMSs using the principle of X-ray computed tomography (CT) (ISO/DIS 10360-11:2021) | |
| Geosynthetics - Part 2: Symbols and pictograms (ISO/DIS 10318-2:2025) | |
| GEOTEXTILES. TENSILE TEST FOR JOINTS/SEAMS BY WIDE-WIDTH METHOD (ISO 10321:1992) | |
| GEOTEXTILES. WIDE-WIDTH TENSILE TEST (ISO 10319:1993) | |
| Germicidal equipment - Airborne microorganisms inactivation by Germicidal Ultraviolet (GUV) luminaires | |
| Germicidal equipment - Germicidal UV luminaires - Radiation safety | |
| Guideline for Switching Reliability Evaluation procedures for Gallium Nitride Power Conversion Devices | |
| High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor | |
| High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC-to-DC converters | |
| High frequency inductive components - Part 1: Fixed surface mount inductors for use in electronic and telecommunication equipment | |
| High-current test techniques - Definitions and requirements for test currents and measuring systems | |
| High-frequency dielectric heating installations - Test methods for the determination of power output | |
| High-level test description table for development of production test programs | |
| High-voltage switchgear and controlgear - Part 201: AC solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV | |
| High-voltage switchgear and controlgear - Part 3: Digital interfaces based on IEC 61850 | |
| High-voltage test techniques - Dielectric loss measurements "PROPOSED HORIZONTAL STANDARD" | |
| Horticultural lighting - LED modules for horticultural lighting - Safety | |
| Horticultural lighting - Luminaires incorporating LED sources for horticultural lighting - Performance | |
| Household and similar electrical air cleaning appliances - Method for measuring performance - Part 2-2: Particular requirements for determination of gas-phase pollutant reduction | |
| Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-17: Particular requirements for floor cleaning robots | |
| Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-1: Particular requirements for dry vacuum cleaners | |
| Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-7: Particular requirements for fans | |
| Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-8: Particular requirements for electric shavers, hair clippers or trimmers | |
| Household and similar electrical rice cookers - Methods for measuring the performance | |
| Hybrid CPV/PV modules: General characteristics and measurement procedures - Part 1: Performance measurements and power rating - Irradiance and temperature | |
| Hydraulic machines - Guidelines for dealing with hydro-abrasive erosion in Kaplan, Francis and Pelton turbines | |
| Identification link - Part 1: General requirements | |
| Industrial automation systems and integration. Product data representation and exchange. Part 210: Application protocol: Electronic assembly, interconnection, and packaging design. (ISO 10303-210:2001) | |
| Industrial microwave heating installations - Test methods for the determination of power output | |
| Industrial networks - 5g communication technology - Part 1: Terms, definitions and fundamentals | |
| Industrial process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs - Part 2: Test Methods for intelligent positioners mounted on an actuator valve assembly... | |
| Industrial systems, installations and equipment and industrial products - Labelling of cables and cores | |
| Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 14: Manufacturing and processing systems | |
| Industrial systems, installations and equipment and industrial products -- Structuring principles and reference designation - Part 50: Processes | |
| Industrial-process control - Safety of analyser houses | |
| Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs | |
| Integrated circuits - EMC evaluation of transceivers - Part 7: CXPI transceivers | |
| Intelligent device management - Part 1: Concepts and terminology | |
| Interpretation of dissolved gas analysis in natural and synthetic esters | |
| Laboratory glassware - One-mark volumetric flasks (ISO/DIS 1042:2026) | |
| LABORATORY GLASSWARE. ONE-MARK VOLUMETRIC FLASKS (ISO 1042:1997) | |
| Leaky waveguides - Part 2: Sectional specification for elliptical leaky waveguides | |
| LED lamps - Safety requirements | |
| LED light sources - Performance requirements | |
| LED modules - Safety requirements | |
| Lighting systems - Electro-mechanical interfaces - Part 1: Safety | |
| Lighting systems - Electro-mechanical interfaces - Part 2-1: Four-pin extra-low-voltage twist-lock interface type zb18 | |
| Lighting systems - General requirements | |
| Lightning protection system components (LPSC) - Part 8: Requirements for components for electrically insulated LPS | |
| Lithium-Ion Batteries and Charging Systems - Safety | |
| Live working - Electrical insulating gloves | |
| Live working - Electrical insulating matting | |
| Live working - Footwear for electrical protection - Part 1: Insulating footwear and overboots | |
| Low-voltage docking connectors for removable energy storage units | |
| Low-voltage surge protective components - Part 361: Surge isolation transformers (SITs) connected to low-voltage distribution system - Requirements and test methods | |
| Low-voltage surge protective devices - Part 31: Requirements and test methods for SPDs for photovoltaic installations | |
| Low-voltage switchgear and controlgear - Part 10: Semiconductor circuit-breakers | |
| Low-voltage switchgear and controlgear - Part 1: General rules | |
| Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) | |
| Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function | |
| Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors | |
| Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors | |
| Low-voltage switchgear and controlgear - Product data and properties for information exchange - Part 1: Catalogue data | |
| Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS) | |
| Low-voltage switchgear and controlgear assemblies - Part 6: Busbar trunking systems (busways) | |
| Luminaires - Part 2-11: Particular requirements - Aquarium luminaires | |
| Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights | |
| Luminaires - Part 2-18: Particular requirements - Luminaires for swimming pools and similar applications | |
| Luminaires - Part 2-1: Particular requirements - Fixed general purpose luminaires | |
| Luminaires - Part 2-24: Particular requirements - Luminaires with limited surface temperatures | |
| Luminaires - Part 2-2: Particular requirements - Recessed luminaires and recessed air-handling luminaires | |
| Management of network assets in power systems - Overview, principles and terminology | |
| Management of network assets in power systems - Risk-informed decision-making process | |
| Maritime navigation and radiocommunication equipment and systems - Bridge navigational watch alarm system (BNWAS) | |
| Maritime navigation and radiocommunication equipment and systems - Data interface - Part 2: Secure communication between ship and shore (SECOM) | |
| Materials for printed boards and other interconnecting structures - Part 2-54: Reinforced base materials clad and unclad - Halogenated modified or unmodified resin system, woven e-glass laminate sheets of defined... | |
| Materials for printed boards and other interconnecting structures - Part 3-6: Sectional specification set for unreinforced base materials, clad and unclad - Ptfe filled laminate sheets of defined flammability (vertical... | |
| Measurement of standby power for appliances and equipment | |
| Measurement procedures for materials used in photovoltaic modules - Part 7-3: Environmental exposures - Accelerated abrasion tests of PV module external surfaces | |
| Measuring equipment for electrical and electromagnetic quantities - Environmental aspects | |
| Mechanical properties measurement - Tensile test of practical REBCO and BSCCO composite superconductors at cryogenic temperatures | |
| Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 3: Environmental requirements, tests and safety aspects | |
| Medical electrical equipment - Dosimeters with ionization chambers or solid-state detectors as used in radiotherapy | |
| Medical electrical equipment - Part 2-23: Particular requirements for the basic safety and essential performance of transcutaneous partial pressure monitoring equipment | |
| Medical electrical equipment - Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers | |
| Medical electrical equipment - Part 2-31: Particular requirements for the basic safety and essential performance of external cardiac pacemakers with internal power source | |
| Medical electrical equipment - Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography | |
| Medical electrical equipment - Part 2-52: Particular requirements for the basic safety and essential performance of medical beds for adults | |
| Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing aids and hearing aid systems | |
| Medical electrical equipment - Part 2-92: Particular requirements for the basic safety and essential performance of magnetic resonance guided radiotherapy equipment for use with external beam equipment | |
| METALLIC COATINGS. REVIEW OF POROSITY TESTS (ISO 10308:1995) | |
| Methods for spectral imaging performance evaluation of computed tomography | |
| Nanomanufacturing - Key control characteristics - Part 3-1: Nanophotonic products - Photoluminescence quantum yield of luminescent nanomaterials: Absorption and photoluminescence spectroscopy | |
| Natural esters - Guidelines for maintenance and use in electrical equipment | |
| NATURAL GAS. DETERMINATION OF WATER BY THE KARL FISCHER METHOD. PART 1: INTRODUCTION (ISO 10101-1:1993) | |
| NATURAL GAS. DETERMINATION OF WATER BY THE KARL FISCHER METHOD. PART 2: TITRATION PROCEDURE (ISO 10101-2:1993) | |
| NATURAL GAS. DETERMINATION OF WATER BY THE KARL FISCHER METHOD. PART 3: COULOMETRIC PROCEDURE (ISO 10101-3:1993) | |
| Nuclear facilities - Instrumentation and control important to safety – Radiation monitoring systems (RMS): Characteristics and lifecycle | |
| Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 1: General | |
| Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 2: Indenter measurements | |
| Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 3: Elongation at break | |
| Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 4: Oxidation induction techniques | |
| Nuclear power plants - Instrumentation and control important to safety - Resistance temperature detectors | |
| Nuclear power plants - Instrumentation, control and electrical power systems - Requirements for static uninterruptible DC and AC power supply systems | |
| Oil and gas industries including lower carbon energy - Cements and materials for well cementing - Part 1: Specification (ISO/DIS 10426-1:2026) | |
| OPC Unified Architecture - Part 9: Alarms and Conditions | |
| Open charge point protocol 2.01 ed4 (Fast track) | |
| Open charge point protocol 2.1 (fast track) | |
| OPHTHALMIC INSTRUMENTS. EYE REFRACTOMETERS (ISO 10342:1997) | |
| OPHTHALMIC INSTRUMENTS. OPHTHALMOMETERS (ISO 10343:1997) | |
| OPHTHALMIC INSTRUMENTS. REFRACTOR HEADS (ISO 10341:1997) | |
| OPHTHALMIC OPTICS. CONTACT LENSES. DETERMINATION OF WATER CONTENT OF HYDROGEL LENSES (ISO 10339:1997) | |
| OPHTHALMIC OPTICS. SEMI-FINISHED SPECTACLE LENS BLANKS. PART 1: SPECIFICATIONS FOR SINGLE-VISION AND MULTIFOCAL LENS BLANKS (ISO 10322-1:1996) | |
| OPHTHALMIC OPTICS. SEMI-FINISHED SPECTACLE LENS BLANKS. PART 2: SPECIFICATIONS FOR PROGRESSIVE POWER LENS BLANKS. (ISO 10322-2:1996) | |
| Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method | |
| Optical circuit boards - Part 2-6: Basic test and measurement procedures - Near field pattern analysis of multimode optical waveguides with rectangular core(s) using encircled flux methodology | |
| Optical fibre cables - Part 1-102: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Abrasion, method e2 | |
| Optical fibre cables - Part 1-103: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Crush, method e3 | |
| Optical fibre cables - Part 1-106: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Repeated bending, method e6 | |
| Optical fibre cables - Part 1-108: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Flexing, method e8 | |
| Optical fibre cables - Part 1-113: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Shotgun resistance, method e13 | |
| Optical fibre cables - Part 1-117: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Bending stiffness, method e17 | |
| Optical fibre cables - Part 1-118: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Bending under tension, method e18 | |
| Optical fibre cables - Part 1-120: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Cable storage performance before installation, method e20 | |
| Optical fibre cables - Part 1-121: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Sheath pull-off force for optical fibre cable for use in patch... | |
| Optical fibre cables - Part 1-122: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Buffered fibre movement under compression in optical fibre cables for use... | |
| Optical fibre cables - Part 1-125: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Ripcord functional test, Method E25 | |
| Optical fibre cables - Part 1-126: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Galloping, method e26 | |
| Optical fibre cables - Part 1-127: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Indoor simulated installation test, method e27 | |
| Optical fibre cables - Part 1-128: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Cable and fibre mechanical reliability test, method e28 | |
| Optical fibre cables - Part 1-135: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Sheave test, method e35 | |
| Optical fibre cables - Part 1-136: Generic specification - Basic optical cable test procedures - Determination of the maximum applicable push force during cable installation by blowing | |
| Optical fibre cables - Part 1-205: Generic specification - Basic optical cable test procedures - Environmental test methods - Water penetration, method f5 | |
| Optical fibre cables - Part 1-210: Generic specification - Basic optical cable test procedures - Environmental test methods - Underwater cable resistance to hydrostatic pressure, method f10 | |
| Optical fibre cables - Part 1-302: Generic specification - Basic optical cable test procedures - Cable element test methods - Ribbon dimensions and geometry - Visual method, method g2 | |
| Optical fibre cables - Part 3-11: Outdoor cables - Detailed specification for duct, directly buried, and lashed aerial optical fibre telecommunication cables | |
| Optical fibres - Part 1-47: Measurement methods and test procedures - Macrobending loss | |
| Optical fibres - Part 1-50: Measurement methods and test procedures - Damp heat (steady state) tests | |
| Optical fibres - Part 1-51: Measurement methods and test procedures - Dry heat (steady state) tests | |
| Optical fibres - Part 1-52: Measurement methods and test procedures - Change of temperature tests | |
| Optical fibres - Part 1-53: Measurement methods and test procedures - Water immersion tests | |
| Optical transmission systems using RFoG technology (TA5) | |
| OPTICS AND OPTICAL INSTRUMENTS. CONTACT LENSES. DETERMINATION OF CURVATURE (ISO 10338:1996) | |
| OPTICS AND OPTICAL INSTRUMENTS. CONTACT LENSES. SALINE SOLUTION FOR CONTACT LENS TESTING (ISO 10344:1996) | |
| Overhead lines - Requirements and tests for fittings | |
| Oxygen concentrator supply systems for use with medical gas pipeline systems (ISO/FDIS 10083:2006) | |
| Part 22: Instrument transformers integrated with other devices with Um <= 36 kV - Requirements and tests | |
| Particular requirement for basic safety and essential performance of non-thermal plasma wound treatment equipment | |
| Passive RF and microwave devices, intermodulation level measurement - Part 7: Field measurements of passive intermodulation | |
| Petroleum and natural gas industries - Care and use of casing and tubing (ISO 10405:2000) | |
| Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification (ISO 10426-1:2005) | |
| Petroleum and natural gas industries - Cements and materials for well cementing - Part 2: Testing of well cements (ISO/DIS 10426-2:2019) | |
| Petroleum and natural gas industries - Field testing of drilling fluids - Part 2: Oil-based fluids (ISO 10414-2:2011) | |
| Petroleum and natural gas industries - Rotary drilling equipment - Part 1: Rotary drill stem elements (ISO 10424-1:2004) | |
| Petroleum and natural gas industries - Rotary drilling equipment - Part 2: Inspection and classification of used drill stem elements (ISO 10407-2:2008) | |
| Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress (ISO 10417:2004) | |
| Petroleum and natural gas industries. Threading, gauging and thread inspection of casing, tubing and line pipe (ISO/DIS 10422:2001) | |
| PETROLEUM PRODUCTS - DETERMINATION OF CARBON RESIDUE - MICRO METHOD. (ISO 10370:1993). | |
| Photovoltaic (PV) module performance testing and energy rating - Part 2: Spectral responsivity, incidence angle and nominal module operating temperature measurements | |
| Photovoltaic (PV) module performance testing and energy rating - Part 3: Energy rating of PV modules | |
| Photovoltaic (PV) systems - Requirements for testing, documentation and maintenance - Part 1: Grid connected systems - Documentation, commissioning tests and inspection | |
| Photovoltaic direct-driven appliance controllers - Part 1: General requirements | |
| Photovoltaic power generating systems - EMC requirements and test methods for power conversion equipment | |
| Photovoltaic power generating systems connection with the grid - Testing for power conversion equipment - Part 5: Electromagnetic compatibility for low frequency conducted disturbances | |
| Photovoltaic power generating systems connection with the grid - Testing of power conversion equipment - Part 1: General requirements | |
| Photovoltaic power generating systems connection with the grid - Testing of power conversion equipment - Part 6: Power control functions and grid support | |
| Photovoltaic power generating systems connection with the grid - Testing of power conversion equipment - Part 7: Remote configuration, control and monitoring | |
| Photovoltaics in buildings - Part 1: Building integrated photovoltaic modules | |
| Photovoltaics in buildings - Part 2: Building integrated photovoltaic systems | |
| Piezoelectric sensors - Part 1: Generic specifications | |
| Piezoelectric sensors - Part 2: Chemical and biochemical sensors | |
| Piezoelectric, dielectric and electrostatic oscillators of assessed quality - Part 2: Guidelines for the use of oscillators | |
| Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) films for capacitors | |
| Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility requirements for DC and AC/DC pin and contact-tube vehicle couplers | |
| Power installations exceeding 1 kv AC and 1,5 kv DC - Part 0: Principles to be observed in the design and erection of high voltage installations - Safety of high... | |
| Power line communication for DC shutdown equipment - Communication signal, physical layer | |
| Power systems management and associated information exchange - Data and communications security - Part 14: Cyber security event logging | |
| Power systems management and associated information exchange - Data and communications security - Part 8: Role-based access control for power system management | |
| Process measurement and control devices - General methods and procedures for evaluating performance - Part 1: General considerations | |
| Process measurement and control devices - General methods and procedures for evaluating performance - Part 2: Tests under reference conditions | |
| Process measurement and control devices - General methods and procedures for evaluating performance - Part 3: Tests for the effects of influence quantities | |
| Prosthetics - Structural testing of lower-limb prostheses - Requirements and test methods (ISO/DIS 10328:2025) | |
| Protective equipment for use in ice hockey - Part 5: Neck laceration protectors for use in ice hockey (ISO/DIS 10256-5:2025) | |
| Quality management. Guidelines for configuration management (ISO 10007:1995) | |
| Quantities and units - Part 15: Logarithmic quantities and their units | |
| Radio-frequency connectors - Part 1-3: Electrical test methods - Surge withstand - Surge protective devices built-in coaxial connector - Performance requirements and testing methods | |
| Radionuclide imaging devices - Characteristics and test conditions - Part 2: Gamma cameras for planar, wholebody, and SPECT imaging | |
| Railway application - Interoperability and safety requirements for dynamic wireless power transfer systems - Part 1: General requirements | |
| Railway applications – Rolling stock – Batteries for auxiliary power supply systems – Part 4: Secondary sealed nickel-metal hydride batteries | |
| Railway applications - Batteries for auxiliary power supply systems - Part 2: Nickel Cadmium (NiCd) batteries | |
| Railway applications - Current collection systems - Validation of simulation of the dynamic interaction between pantograph and overhead contact line | |
| Railway applications - Cybersecurity | |
| Railway applications - Electronic power converters for fixed installations - Part 2-2: DC applications - Controlled converters | |
| Railway applications - Electronic power converters for fixed installations - Part 3-2: AC traction applications - Static frequency converter | |
| Railway applications - Hydrogen and fuel cell systems for rolling stock - Part 2: Hydrogen fuel system | |
| Railway applications - Rolling stock - Batteries for auxiliary power supply systems - Part 1: General Requirements | |
| Railway applications - Rolling stock - Batteries for auxiliary power supply systems - Part 2: Nickel Cadmium (NiCd) batteries | |
| Railway applications - Rolling stock - Batteries for auxiliary power supply systems - Part 3: Lead acid batteries | |
| Railway applications - Rolling stock - Batteries for auxiliary power supply systems - Part 5: Lithium-ion batteries | |
| Railway applications - Rolling stock - Specification and verification of energy consumption | |
| Railway applications - Rolling stock equipment - Shock and vibration tests | |
| Reference conditions and procedures for testing industrial and process measurement transmitters - Part 1: General procedures for all types of transmitters | |
| Reference conditions and procedures for testing industrial and process measurement transmitters - Part 2: Specific procedures for pressure transmitters | |
| Reference conditions and procedures for testing industrial and process measurement transmitters - Part 3: Specific procedures for temperature transmitters | |
| Repurposing of secondary batteries - Part 1: General requirements | |
| Residual current operated circuit-breakers for household and similar uses for dc systems - Part 2: Residual current operated circuit breakers without integral overcurrent protection (DC-RCCBs) | |
| Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules | |
| Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 2-1: RCBOs according to classification 4.1.1 | |
| Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules | |
| Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 2-1: RCCBs according to classification 4.1.1 | |
| Residual direct current detecting device (RDC-DD) to be used for mode 3 charging of electric vehicles | |
| Rope for electrical work - Part 1: Work within the live working zone or in contact with live parts | |
| Rules for steam turbine thermal acceptance tests - Part 1: High accuracy for large condensing steam turbines | |
| Rules for steam turbine thermal acceptance tests - Part 4: Routine testing | |
| Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information | |
| Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCSs) | |
| Safety of machinery - Application of protective equipment to detect the presence of persons | |
| Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests | |
| Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) | |
| Safety of machinery - Requirements for cableless control systems of machinery | |
| Safety of machinery - Safety-related sensors used for the protection of persons | |
| Safety of power converters for use in photovoltaic power systems - Part 1: General requirements | |
| Safety of power converters for use in photovoltaic power systems - Part 2: Particular requirements for inverters | |
| Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-203: Particular requirements for industrial communication circuits and communication port interconnection | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011: Particular requirements for refrigerating equipment | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030: Particular requirements for equipment having testing or measuring circuits | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-033: Particular requirements for hand-held multimeters and other meters for domestic and professional use, capable of measuring... | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-034: Particular requirements for measurement equipment for insulation resistance and test equipment for electric strength | |
| Safety requirements for power electronic converter systems and equipment - Part 2: High voltage power electronic converters up to 36 kv a.c. or 54 kv d.c. | |
| Secondary cells and batteries containing alkaline or other non acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 2: Nickel-metal hydride | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Nickel-cadmium prismatic rechargeable cells with partial gas recombination and batteries for use in industrial applications. | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary lithium cells, and for batteries made from them, for use in portable applications... | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-cadmium prismatic rechargeable cells and batteries for use in industrial applications. | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-metal hydride cells and batteries for use in industrial applications - Part 1: Performance | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-metal hydride cells and batteries for use in industrial applications - Part 2: Safety | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-metal hydride prismatic rechargeable cells and batteries for use in industrial applications. | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for use in industrial applications | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 1: Nickel-Cadmium | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Vented nickel-cadmium prismatic rechargeable cells and batteries for use in industrial applications. | |
| Semiconductor devices - Generic semiconductor qualification guidelines - Part 3: Guidelines for reliability qualification plans for power semiconductor module | |
| Semiconductor devices - Guidelines for reliability qualification plans - Part 4: Early failure assessment | |
| Semiconductor devices - Mechanical and climatic test methods - Part 20-1: Handling, packing, labelling and shipping of surface-mount devices sensitive to the combined effect of moisture and soldering heat | |
| Semiconductor devices - Mechanical and climatic test methods - Part 29: Latch-up test | |
| Semiconductor devices - Micro-electromechani cal devices - Part 35: Test method of electrical characteristics under bending deformation for flexible electro-mechanical devices | |
| Semiconductor devices - Neuromorphic devices - Part 1: Evaluation method of basic characteristics in memristor devices | |
| Semiconductor devices - Neuromorphic devices - Part 2: Evaluation method of linearity in memristor devices | |
| Semiconductor devices - Neuromorphic devices - Part 3: Evaluation method of spike dependent plasticity in memristor devices | |
| Semiconductor devices - Neuromorphic devices - Part 4: Evaluation method of asymmetry in memristor devices | |
| Semiconductor devices - Performance evaluation of semiconductor processing components and inspection equipment - Part 1: Transmittance evaluation method of euv pellicle | |
| Semiconductor devices - Performance evaluation of semiconductor processing components and inspection equipment - Part 4: Evaluation methods for dimensional accuracy of laser dicing process | |
| Semiconductor devices - Reliability test method by inductive load switching for gallium nitride transistors | |
| Semiconductor devices - Reliability test method for silicon carbide discrete metal-oxide semiconductor field effect transistors - Part 1: Test method for bias temperature instability | |
| Semiconductor devices - Reliability test method for silicon carbide discrete metal-oxide semiconductor field effect transistors - Part 2: Test method for bipolar degradation due to body diode operation | |
| Semiconductor devices - Reliability test methods for vibration energy harvesters - Part 1: Mechanical reliability under shock | |
| Short-circuit currents - Calculation of effects - Part 1: Definitions and calculation methods | |
| Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents | |
| Solar thermal electric plants - Part 1-5: Performance code test for solar thermal electric plants | |
| Solar thermal electric plants - Part 3-1: General requirements for the design of parabolic trough solar thermal electric plants | |
| Solar thermal electric plants - Part 4-1: General requirements for the design of solar tower plants | |
| Specification for the testing of balanced and coaxial information technology cabling - Part 4: Installed balanced single-pair cabling as specified in ISO/IEC 11801-1 and related standards | |
| Standard data element types with associated classification scheme - Part 7: Data dictionary of cross-domain concepts | |
| Static transfer systems (STS) - Part 1: General and safety requirements | |
| STEEL AND IRON. DETERMINATION OF TITANIUM CONTENT. DIANTYPYRYLMETHANE SPECTROPHOTOMETRIC METHOD. (ISO 10280:1991) | |
| Structural adhesives - Determination of the pot life and working life of multi-component adhesives (ISO/DIS 10364:2026) | |
| Surface cleaning appliances - Part 11: Wet-cleaning robots for household or similar use - Methods for measuring the performance | |
| Surface cleaning appliances - Part 14: Cleaning machines for commercial use - Requirements for conducting a life cycle assessment (LCA) | |
| Surface mounting technology - Part 1: Standard method for the specification of surface mounting components (SMDs). | |
| Surface mounting technology - Part 4: Classification, packaging, labelling and handling of moisture sensitive devices | |
| Sustainable management of waste electrical and electronic equipment (e-waste) - Proposed horizontal publication | |
| Switches for appliances - Part 1-1: Requirements for mechanical switches | |
| Switches for appliances - Part 1-2: Requirements for electronic switches | |
| Switches for appliances - Part 1: General requirements | |
| Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic control devices | |
| Switchgear and controlgear and their assemblies for low voltage - Environmental aspects | |
| Switching device for islanding (SDFI) | |
| Systems engineering - System safety - Complex systems in defence programmes Part 1 - Concepts, terminology and requirements | |
| Terrestrial photovoltaic (PV) modules - Quality system for PV module manufacturing | |
| Test method for assessing the performance of gas-phase air cleaning media and devices for general ventilation - Part 1: Gas-phase air cleaning media (ISO/DIS 10121-1:2025) | |
| Test methods for assessing the performance of gas-phase air cleaning media and devices for general ventilation - Part 2: Gas-phase air cleaning devices (GPACD) (ISO/DIS 10121-2:2025) | |
| Test methods for compatibility of construction materials with electrical insulating liquids | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3-720: Test methods for interconnection structures (circuit boards) - Transmission loss test method for high... | |
| Thermal standardization on semiconductor packages - Part 2-2: 3D thermal simulation models of semiconductor packages for steady-state analysis - PBGA and FBGA packages | |
| Thermal standardization on semiconductor packages - Part 4: Thermal evaluation board specifications for fine pitch semiconductor packages | |
| Thermal standardization on semiconductor packages - Part 6-1: Thermal resistance and capacitance model for transient temperature prediction at junction and measurement points - Model creation method using a datasheet of... | |
| UHV AC transmission systems - Part 102: General system design | |
| Ultrasonics - Measurement of temperature rise produced by medical ultrasonic equipment | |
| Uninterruptible power systems (UPS) - Part 1: Safety requirements | |
| User’s quality of experience (QoE) on multimedia conferencing services - Part 3: Measurement methods | |
| Voltage surge protective devices - Part 11: Surge protective devices connected to AC low-voltage power systems - Requirements and test methods | |
| WATER QUALITY - MARINE ALGAL GROWTH INHIBITION TEST WITH SKELETONEMA COSTATUM AND PHAEODACTYLUM TRICORNUTUM (ISO 10253:1995). | |
| Water quality. Determination of dissolved anions by liquid chromatography of ions. Part 2: Determination of bromida, chloride, nitrate, nitrite, orthophosphate and sulfate in waste water.(ISO 10304-2:1995) | |
| Wearable electronic devices and technologies - Part 101-1: Terminology | |
| Wearable electronic devices and technologies - Part 401-1: Devices and systems: Functional elements - Measurement method of the stretchable resistive strain sensor | |
| Wearable electronic devices and technologies - Part 403-1: Test method of surface electromyography sensors onto forearm and hand for wearable applications | |
| Wearable electronic textiles - Test methods for performance of heating products - Heating temperature and power consumption | |
| Wind energy generation systems - Part 16: Standard format for sharing power curves and associated information | |
| Winding wires - Test methods - Part 5: Electrical properties |
| << Prev | Next >> |