AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| ACOUSTICS - DETERMINATION OF SOUND POWER ,LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHOD IN AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE (ISO 3744:1994) | |
| ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION... | |
| ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USINGSOUND PRESSURE - PRECISION METHODS FOR REVERBERATION ROOMS (ISO/DIS 3741:1996). | |
| Acoustics - Hearing aid fitting management (HAFM) - Part 1: General process (ISO/DIS 21388-1:2025) | |
| Agricultural and forestry machinery - Environmental requirements for sprayers - Part 5: Aerial spray systems (ISO/FDIS 16119-5:2018) | |
| Agricultural and forestry machinery - Inspection of sprayers and liquid fertilizer distributors in use - Part 1: General (ISO/DIS 16122-1:2011) | |
| Agricultural and forestry machinery - Inspection of sprayers and liquid fertilizer distributors in use - Part 2: Horizontal boom sprayers and similar (ISO/DIS 16122-2:2011) | |
| Agricultural and forestry machinery - Inspection of sprayers and liquid fertilizer distributors in use - Part 3: Sprayers for bush and tree crops (ISO/DIS 16122-3:2011) | |
| Agricultural machinery, tractors, and earth-moving machinery - Product cybersecurity (ISO/DIS 24882:2025) | |
| Air compressors and compressed air systems - Air compressors - Part 1: Safety requirements (ISO/DIS 18623-1:2016) | |
| Air compressors and compressed air systems - Part 1: Air compressor safety requirements (ISO/DIS 18623-1:2023) | |
| Air filters for general ventilation - Part 1: Technical specifications, requirements and classification system based upon particulate matter efficiency (ePM) (ISO/DIS 16890-1:2025) | |
| Aircraft ground support equipment - General requirements - Part 3: Vibration measurement methods and reduction (ISO/FDIS 31915-3:2026) | |
| Anaesthetic and respiratory equipment - Respiratory therapy tubing and connectors (ISO 17256:2024) | |
| Anaesthetic and respiratory equipment - Waste volatile anaesthetic agent capture systems (ISO/DIS 18730:2026) | |
| Assistive products for toileting, bathing and showering - Requirements and test methods (ISO/DIS 17966:2024) | |
| Biotechnology - Biobanking - General requirements for biobanks (ISO/DIS 20387:2025) | |
| Brazing - Specification and qualification of brazing procedures for metallic materials (ISO/DIS 17779:2026) | |
| Building automation and control systems (BACS) - Part 2: Hardware (ISO/DIS 16484-2:2016) | |
| Building automation and control systems (BACS) - Part 5: Data communication protocol (ISO/DIS 16484-5:2026) | |
| Building automation and control systems (BACS) - Part 6: Data communication conformance testing (ISO/FDIS 16484-6:2025) | |
| Building automation and control systems - Part 5: Data communication protocol (ISO 16484-5:2007) | |
| Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven abrasive cutting machines - Part 2: Machines for abrasive chains - Safety requirements (ISO/DIS 19432-2:2024) | |
| BUILDING CONTROL SYSTEMS. PART 1: OVERVIEW AND DEFINITIONS (ISO/DIS 16484-1:1999) | |
| Carbon dioxide capture, transportation and storage - Vocabulary - Cross cutting terms (ISO/DIS 27917:2026) | |
| Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica (ISO 20565-1:2008) | |
| Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 2: Wet chemical analysis (ISO 20565-2:2008) | |
| Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission... | |
| Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods (ISO 26845:2008) | |
| Chemical analysis of refractories containing alumina, zirconia and silica - Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents... | |
| Chemical analysis of refractories containing alumina, zirconia, and silica - Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) - Part 2: Wet chemical... | |
| Chemical analysis of refractories containing alumina, zirconia, and silica - Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) - Part 3: Flame atomic... | |
| Chemical analysis of silicon-carbide-cont aining raw materials and refractory products - Part 1: General information and sample preparation (ISO 21068-1:2008) | |
| Chemical analysis of silicon-carbide-cont aining raw materials and refractory products - Part 2: Determination of loss on ignition, total carbon, free carbon and silicon carbide, total and free silica and... | |
| Chemical analysis of silicon-carbide-cont aining raw materials and refractory products - Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents (ISO 21068-3:2008) | |
| Chemicals for the leather tanning industry - Determination of the total content of melamine (ISO/DIS 25712:2025) | |
| Clinical evaluation of medical devices (ISO/DIS 18969:2025) | |
| CLOTHING FOR PROTECTION AGAINST HEAT AND FLAME. GENERAL RECOMMENDATIONS FOR SELECTION, CARE AND USE OF PROTECTIVE CLOTHING (ISO/DIS 2801:1996) | |
| Commercial beverage coolers - Classification, requirements and test conditions (ISO/DIS 22044:2024) | |
| COMPRESSION MOULDED SHEETS OF POLYETHYLENE (PE-UHMW, PE-HMW, PE-HD) - REQUIREMENTS AND TEST METHODS (ISO/DIS 15527:1998) | |
| Corrosion of metals and alloys - Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys (ISO 15329:2006) | |
| Corrosion of metals and alloys - Corrosion and fouling in industrial cooling water systems - Part 1: Guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open... | |
| Corrosion of metals and alloys - Corrosion and fouling in industrial cooling water systems - Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test... | |
| Corrosion of metals and alloys - Sulfur dioxide test in a humid atmosphere (fixed gas method) (ISO/DIS 22479:2026) | |
| CRUDE PETROLEUM AND FUEL OILS. DETERMINATION OF SEDIMENT. EXTRACTION METHOD (ISO 3735:1975) | |
| CRUDE PETROLEUM AND LIQUID PETROLEUM PRODUCTS - LABORATORY DETERMINATION OF DENSITY - HYDROMETER METHOD (ISO/DIS 3675:1996) | |
| Cryogenic vessels - Gas/material compatibility (ISO/DIS 21010:2025) | |
| Cryogenic vessels - Large transportable vacuum-insulated vessels - Part 1: Design, fabrication, inspection and testing (ISO/DIS 20421-1:2025) | |
| Cryogenic vessels - Pressure-relief accessories for cryogenic service - Part 3: Sizing and capacity determination (ISO/DIS 21013-3:2025) | |
| Cryogenic vessels - Static vacuum-insulated vessels - Part 1: Design, fabrication, inspection and tests (ISO/DIS 21009-1:2024) | |
| Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 degrees C (ISO/DIS 21028-1:2024) | |
| Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1 000 litres volume - Part 1: Design, fabrication, inspection and tests (ISO/DIS 21029-1:2025) | |
| Cryogenic vessels - Valves for cryogenic service (ISO/FDIS 21011:2023) | |
| DENTAL AQUEOUS IMPRESSION MATERIALS BASED ON AGAR (ISO 1564:1995) | |
| Dentistry - Adhesion - Notched-edge shear bond strength test (ISO/DIS 29022:2026) | |
| Dentistry - Base polymers - Part 1: Denture base polymers (ISO/DIS 20795-1:2026) | |
| Dentistry - Coiled springs for use in orthodontics (ISO/DIS 17254:2026) | |
| Dentistry - Denture lining materials - Part 1: Hard type materials (ISO/DIS 23401-1:2026) | |
| Dentistry - Denture lining materials - Part 2: Soft type materials for short-term use (ISO/DIS 23401-2:2026) | |
| Dentistry - Denture lining materials - Part 3: Soft type materials for long-term use (ISO/DIS 23401-3:2026) | |
| Dentistry - Designations for the parts and dimensions of an implant body or a monopart implant (ISO/DIS 24466:2022) | |
| Dentistry - Endodontic instruments - Part 1: General requirements (ISO/DIS 3630-1:2026) | |
| Dentistry - Endodontic instruments - Part 2: Enlargers (ISO 3630-2:2013) | |
| Dentistry - Endodontic instruments - Part 6: Number coding system (ISO/DIS 3630-6:2021) | |
| Dentistry - Endodontic instruments - Part 8: Accuracy of electronic apex locator (ISO/FDIS 3630-8:2026) | |
| Dentistry - External tooth bleaching products (ISO/DIS 28399:2025) | |
| Dentistry - Extraoral spatulas for mixing dental cements (ISO/DIS 18559:2015) | |
| Dentistry - Filling instrument with contra angle (ISO 19715:2017) | |
| Dentistry - Manual toothbrushes - General requirements and test methods (ISO/DIS 20126:2026) | |
| Dentistry - Portable dental equipment for use in non-permanent healthcare environments - Part 1: General requirements (ISO/FDIS 23402-1:2026) | |
| Dentistry - Portable dental equipment for use in non-permanent healthcare environments - Part 2: Portable dental units (ISO/DIS 23402-2:2026) | |
| Dentistry - Shanks for rotary and oscillating instruments (ISO 1797:2017) | |
| Dentistry - Vocabulary for Source Conclusion for Human Identification by Dental Evidence (ISO/DIS 21611:2025) | |
| Dentistry - Vocabulary of process chain for CAD/CAM systems (ISO 18739:2026) | |
| Dosimetry with radiophotoluminescen t glass dosimeters for dosimetry audit in MV X-ray radiotherapy (ISO 22127:2019) | |
| Drilling and foundation equipment - Horizontal directional drilling (HDD) machines - Safety requirements and verification (ISO/DIS 23224:2025) | |
| Drilling and foundation equipment - Safety - Part 1: Common requirements (ISO/DIS 20770-1:2025) | |
| Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering (ISO/DIS 20770-2:2025) | |
| Drilling and foundation equipment - Safety - Part 3: Foundation equipment (ISO/DIS 20770-3:2025) | |
| Drilling and foundation equipment - Safety - Part 4: Diaphragm walling equipment (ISO/DIS 20770-4:2025) | |
| Drilling and foundation equipment - Safety - Part 5: Jetting, grouting and injection equipment (ISO/DIS 20770-5:2025) | |
| Drilling and foundation equipment - Safety - Part 6: Interchangeable auxiliary equipment (ISO/DIS 20770-6:2025) | |
| Earth-moving machinery - Functional safety - Part 1: Methodology to determine safety-related parts of the control system and performance requirements (ISO/DIS 19014-1:2025) | |
| Earth-moving machinery - Functional safety - Part 2: Design and evaluation of hardware and architecture requirements for safety-related parts of the control system (ISO/DIS 19014-2:2025) | |
| Earth-moving machinery - Functional safety - Part 3: Environmental performance and test requirements of electronic and electrical components used in safety-related parts of the control system (ISO/DIS 19014-3:2025) | |
| Earth-moving machinery - Functional safety - Part 4: Design and evaluation of software and data transmission for safety-related parts of the control system (ISO/DIS 19014-4:2025) | |
| Earth-moving machinery - Functional safety - Part 5: Tables of performance levels (ISO/DIS 19014-5:2025) | |
| EARTH-MOVING MACHINERY - HUMAN PHYSICAL DIMENSIONS OF OPERATORS AND MINIMUM OPERATOR SPACE ENVELOPE (ISO 3411:1995) | |
| EARTH-MOVING MACHINERY - LABORATORY EVALUATIONS OF PROTECTIVE STRUCTURES - SPECIFICATIONS FOR DEFLECTION-LIMITING VOLUME (ISO 3164:1995). | |
| EARTH-MOVING MACHINERY. ACCESS SYSTEMS (ISO 2867:1994) | |
| EARTH-MOVING MACHINERY. ROLL-OVER PROTECTIVE STRUCTURES. LABORATORY TESTS AND PERFORMANCE REQUIREMENTS (ISO 3471:1994 + AMENDMENT 1:1997) | |
| Electronic fee collection - Application interface definition for autonomous systems - Part 4: Roaming (ISO/DIS 17575-4:2013) | |
| Electronic fee collection - Guidelines for security protection profiles (ISO/DIS 17574:2025) | |
| Electronic fee collection - System architecture for vehicle-related tolling - Part 1: Reference model (ISO/DIS 17573-1:2025) | |
| Electronic fee collection. Systems architecture for vehicle related tolling (ISO/DIS 17573:2009) | |
| Energy efficiency of industrial trucks - Test methods - Part 4: Variable-reach rough-terrain trucks (ISO/DIS 23308-4:2025) | |
| Enterprise integration - Constructs for enterprise modelling (ISO 19440:2007) | |
| Enterprise integration - Framework for enterprise modelling (ISO 19439:2006) | |
| Environmental Solid Matrices - Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography (ISO/DIS 16703:2024) | |
| Equipment for crop protection - Knapsack sprayers - Part 1: Safety and environmental requirements (ISO/FDIS 19932-1:2019) | |
| Equipment for crop protection - Knapsack sprayers - Part 2: Test methods (ISO/FDIS 19932-2:2019) | |
| Equipment for crop protection - Knapsack sprayers - Part 3: Inspection of knapsack sprayers in use (ISO/FDIS 19932-3:2019) | |
| Ergonomics - Accessible design - Auditory signals for consumer products (ISO 24500:2010) | |
| Ergonomics - Accessible design - Method for creating colour combinations taking account of age-related changes in human colour vision (ISO 24505:2016) | |
| Ergonomics - Accessible design - Sound pressure levels of auditory signals for consumer products (ISO 24501:2010) | |
| Ergonomics - Accessible design - Specification of age-related luminance contrast for coloured light (ISO 24502:2010) | |
| Ergonomics of the physical environment - Application of international standards to people with special requirements (ISO 28803:2012) | |
| Ergonomics of the physical environment - Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people (ISO 28802:2012) | |
| Essential oils - Principles of nomenclature (ISO 3218:1976) | |
| EXTENDERS FOR PAINTS - SPECIFICATIONS AND METHODS OF TEST - PART 13: NATURAL QUARTZ (GROUND) (ISO 3262-13:1997) | |
| EXTENDERS FOR PAINTS - SPECIFICATIONS AND METHODS OF TEST - PART 1: INTRODUCTION AND GENERAL TEST METHODS (ISO 3262-1:1997) | |
| EXTENDERS FOR PAINTS - SPECIFICATIONS AND METHODS OF TEST - PART 9: CALCINED CLAY (ISO 3262-9:1997)) | |
| External limb prostheses and external orthoses - Requirements and test methods (ISO/DIS 22523:2026) | |
| Eye and face protection - Part 4: Protection against biological hazards (ISO/FDIS 16321-4:2025) | |
| Fasteners - Heat-treated steel tapping screws - Mechanical and physical properties (ISO/DIS 2702:2019) | |
| Fasteners - Vocabulary - Part 2: Coatings (ISO/DIS 1891-2:2025) | |
| FASTENERS. PRELOADING TEST FOR THE DETECTION OF HYDROGEN EMBRITTLEMENT. PARALLEL BEARING SURFACE METHOD (ISO/DIS 15330:1997) | |
| Fertilizers - Determination of ammoniacal nitrogen (ISO 25475:2016) | |
| Fertilizers - Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen (ISO 15604:2016) | |
| Fertilizers - Determination of extracted phosphorus (ISO 15959:2016) | |
| Fertilizers - Determination of urea condensates using high-performance liquid chromatography (HPLC) - Isobutylidenediurea and crotonylidenediurea (method A) and methylene-urea oligomers (method B) (ISO 25705:2016) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) — Test methods for fracture toughness of monolithic ceramics — Single-edge V-notch beam (SEVNB) method | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of absolute density of ceramic powders by pycnometer (ISO 18753:2017) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of absolute density of ceramic powders by pyknometer (ISO 18753:2004) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method (ISO 18756:2003) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of specific surface area of ceramic powders by gas adsorption using the BET method (ISO 18757:2003) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods for chemical analysis of silicon nitride powders - Part 1: Wet chemical methods, X-ray fluorescence (XRF) using the fused cast-bead method,... | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods for chemical analysis of zirconium oxide powders (ISO/DIS 23739:2026) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method (ISO 15732:2003) | |
| FLEXIBLE CELLULAR POLYMERIC MATERIALS. DETERMINATION OF STRESS-STRAIN CHARACTERISTICS IN COMPRESSION. PART 2: HIGH-DENSITY MATERIALS (ISO 3386-2:1997) | |
| Food products - Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content - Part 1: Oilseeds and animal feeding... | |
| Food products - Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content -Part 2: Cereals, pulses and cereal coproducts... | |
| Footwear - Ageing conditioning (ISO/DIS 20870:2016) | |
| Footwear - Compression fatigue resistance of footwear and sole components (ISO/DIS 25151:2025) | |
| Footwear - Determination of water resistance of footwear (dynamic test) (ISO/DIS 25150:2025) | |
| Footwear - Standard atmospheres for conditioning and testing of footwear and components for footwear (ISO/DIS 18454:2016) | |
| Footwear - Test methods for insoles - Abrasion resistance (ISO/DIS 20868:2008) | |
| Footwear - Test methods for insoles - Delamination resistance (ISO/DIS 20866: 2016) | |
| Footwear - Test methods for insoles - Heel pin holding strength (ISO/DIS 20867: 2016) | |
| Footwear - Test methods for insoles - Resistance to stitch tear (ISO/DIS 20876:2016) | |
| Footwear - Test methods for outsoles - Abrasion resistance (ISO/DIS 20871:2016) | |
| Footwear - Test methods for outsoles - Dimensional stability (ISO/DIS 20873:2016) | |
| Footwear - Test methods for outsoles - Needle tear strength (ISO/DIS 20874:2016) | |
| Footwear - Test methods for outsoles - Tear strength (ISO/DIS 20872:2016) | |
| Footwear - Test methods for shanks - Longitudinal stiffness (ISO/DIS 18896:2016) | |
| Footwear - Test methods for uppers and lining - Water vapour permeability and absorption (ISO/DIS 17699:2008) | |
| Footwear - Test methods for uppers, linings and insocks - Abrasion resistance (ISO/DIS 17704:2008) | |
| Footwear - Test methods for whole shoe - Heel attachment (ISO/DIS 22650: 2016) | |
| Footwear - Test methods for whole shoe - Wear simulation by flex resistance (ISO/DIS 19955:2001) | |
| Footwear -Test methods for outsoles - Determination of split tear strength and delamination resistance (ISO/DIS 20875:2016) | |
| Gas cylinders - Seamless steel and seamless aluminium-alloy gas cylinders and tubes - Periodic inspection and testing (ISO/DIS 18119:2026) | |
| Gas cylinders - Self-closing cylinders valves - Specification and type testing (ISO/DIS 17879:2026) | |
| GAS WELDING EQUIPMENT. PRESSURE REGULATORS FOR GAS CYLINDERS USED IN WELDING, CUTTING AND ALLIED PROCESSES UP TO 300 BAR (ISO/DIS 2503:1996) | |
| Gaseous hydrogen land vehicle refuelling connection devices - Part 2: Flow capacities greater than 120 g/s (ISO/DIS 17268-2:2026) | |
| Geographic information - Content components and encoding rules for imagery and gridded data - Part 2: Implementation schema (ISO/DIS 19163-2:2026) | |
| Geographic information - Data quality - Part 3: Data quality measures register (ISO/DIS 19157-3:2025) | |
| Geographic information - Geodetic register (ISO/DIS 19127:2025) | |
| Geographic information - Schema for coverage geometry and functions - Part 2: Coverage implementation schema (ISO/DIS 19123-2:2025) | |
| Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters (ISO 16610-61:2015) | |
| Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO 25178-606:2015) | |
| Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO/FDIS 1938-1:2026) | |
| Geometrical product specifications (GPS) - Dimensional tolerancing -Tolerance limits for general specification of linear and angular sizes (ISO/DIS 2768:2025) | |
| Geometrical product specifications (GPS) - Filtration - Part 22: Linear profile filters: Spline filters (ISO 16610-22:2015) | |
| Geometrical product specifications (GPS) - Filtration - Part 29: Linear profile filters: Spline wavelets (ISO 16610-29:2015) | |
| Geometrical product specifications (GPS) - Filtration - Part 40: Morphological profile filters: Basic concepts (ISO 16610-40:2015) | |
| Geometrical product specifications (GPS) - Filtration - Part 41: Morphological profile filters: Disk and horizontal line-segment filters (ISO 16610-41:2015) | |
| Geometrical product specifications (GPS) - Filtration - Part 49: Morphological profile filters: Scale space techniques (ISO 16610-49:2015) | |
| Geometrical product specifications (GPS) - Restrained states (ISO/DIS 25935:2026) | |
| Geometrical product specifications (GPS) - Surface texture: Areal - Part 606: Design and characteristics of non-contact (focus variation) instruments (ISO/FDIS 25178-606:2026) | |
| Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface topography (ISO/DIS 25178-6:2026) | |
| Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO/DIS 25178-71:2025) | |
| GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - NOMINAL CHARACTERISTCS OF CONTACT (STYLUS) INSTRUMENTS (ISO 3274:1996). | |
| Geosynthetic - Test method for determining the resistance of polymeric geosynthetic barriers to environmental stress cracking (ISO/DIS 24576:2017) | |
| Geotechnical investigation and testing - Field testing - Part 1: Electrical cone and piezocone penetration tests (ISO/DIS 22476-1:2005) | |
| Geotechnical investigation and testing - Field testing - Part 4: Ménard pressuremeter test (ISO/DIS 22476-4:2005) | |
| Geotechnical investigation and testing - Field testing - Part 5: Flexible dilatometer test (ISO/DIS 22476-5:2008) | |
| Geotechnical investigation and testing - Field testing - Part 7: Borehole jack test (ISO/DIS 22476-7:2008) | |
| Geotechnical investigation and testing - Field testing - Part 9: Field vane test (ISO/DIS 22476-9:2009) | |
| Geotechnical investigation and testing - Geohydraulic testing - Part 1: General rules (ISO 22282-1:2008) | |
| Geotechnical investigation and testing - Geohydraulic testing - Part 2: Water permeability tests in a borehole without packer (ISO 22282-2:2008) | |
| Geotechnical investigation and testing - Geohydraulic testing - Part 3: Water pressure test in rock (ISO/DIS 22282-3:2007) | |
| Geotechnical investigation and testing - Geohydraulic testing - Part 4: Pumping test (ISO/DIS 22282-4:2007) | |
| Geotechnical investigation and testing - Geohydraulic testing - Part 5: Infiltrometer test (ISO/DIS 22282-5:2007) | |
| Geotechnical investigation and testing - Geohydraulic testing - Part 6: Water permeability tests in a borehole with packer and pulse-litre stimulation (ISO 22282-6:2008) | |
| Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 6: Measurement of settlement: Hydraulic settlement systems (ISO/DIS 18674-6:2026) | |
| Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 9: Measurement of displacement by Geodetic means (ISO/DIS 18674-9:2026) | |
| Geotechnical investigation and testing - Laboratory testing of rock - Part 2: Determination of density and open porosity (ISO/DIS 16383-2:2026) | |
| Geotechnical investigation and testing - Testing of geotechnical structures - Part 1: Pile load test by static axially loaded compression (ISO/DIS 22477-1:2005) | |
| Geotechnical investigation and testing - Testing of geotechnical structures - Part 5: Testing of anchorages (ISO/DIS 22477-5:2005) | |
| Geotechnical investigation and testing - Testing of geotechnical structures - Part 5: Testing of anchorages (ISO/DIS 22477-5:2009) | |
| Ground investigation and testing - Field testing - Part 9: Field vane test | |
| Guidelines for auditing management systems (ISO/FDIS 19011:2026) | |
| Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 13: Fastener driving tools (ISO/DIS 28927-13:2017) | |
| Health informatics - Audit trails for electronic health records (ISO 27789:2013) | |
| Health informatics - Audit trails for electronic health records (ISO/DIS 27789:2026) | |
| Health informatics - Categorial structures for representation of nursing diagnoses and nursing actions in terminological systems (ISO 18104:2014) | |
| Health informatics - Directory services for healthcare providers, subjects of care and other entities (ISO 21091:2013) | |
| Health informatics - Identification of medicinal products - Core vocabulary (terms and definitions) for the IDMP Standards (ISO/DIS 22532:2025) | |
| Health informatics - Individual case safety reports (ICSRs) in pharmacovigilance - Part 1: Framework for adverse event reporting (ISO 27953-1:2011) | |
| Health informatics - Individual case safety reports (ICSRs) in pharmacovigilance - Part 2: Human pharmaceutical reporting requirements for ICSR (ISO 27953-2:2011) | |
| Health informatics - Information security management in health using ISO/IEC 27002 (ISO 27799:2016) | |
| Health informatics - Interoperability of personal health decision support services (ISO/DIS 20737:2025) | |
| Health informatics - Privilege management and access control - Part 1: Overview and policy management (ISO 22600-1:2014) | |
| Health informatics - Privilege management and access control - Part 2: Formal models (ISO 22600-2:2014) | |
| Health informatics - Privilege management and access control - Part 3: Implementations (ISO 22600-3:2014) | |
| Health informatics - Pseudonymization (ISO 25237:2017) | |
| Health informatics - Requirements for electronic prescriptions (ISO 17523:2016) | |
| Horizontal methods for molecular biomarker analysis - Methods of analysis for the detection of genetically modified organisms and derived products - Part 1: Qualitative nucleic acid based methods (ISO/DIS 21569-1:2025)... | |
| Hydrogen technologies - Methodology for determining the greenhouse gas emissions associated with the hydrogen supply chain - Part 1: Emissions associated with the production of hydrogen to production gate (ISO/DIS... | |
| Hydrogen technologies - Methodology for determining the greenhouse gas emissions associated with the hydrogen supply chain - Part 2: Emissions associated with the conditioning and transport of gaseous and liquid... | |
| Hydrogen technologies - Methodology for determining the greenhouse gas emissions associated with the hydrogen supply chain - Part 3: Emissions associated with the production, storage and transport of ammonia up... | |
| Ice-cream freezers - Classification, requirements and test conditions (ISO/DIS 22043:2024) | |
| Industrial automation systems. Numerical control of machines. Vocabulary (ISO 2806:1994) | |
| Industrial furnaces and associated processing equipment - Safety requirements for steel converter and associated equipment (ISO/DIS 23495:2019) | |
| Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO/DIS 3691-1:2022) | |
| Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO/DIS 3691-1:2025) | |
| Industrial trucks - Safety requirements and verification - Part 2: Self-propelled variable-reach trucks (ISO/DIS 3691-2:2006) | |
| Industrial trucks - Safety requirements and verification - Part 4: Driveless industrial trucks and their systems (ISO/DIS 3691-4:2006) | |
| Information technology - Cloud computing - Part 1: Vocabulary (ISO/IEC 22123-1:2023) | |
| Information technology - Cloud computing - Part 2: Concepts (ISO/IEC 22123-2:2023) | |
| Information technology - Cloud computing - Part 3: Reference architecture (ISO/IEC 22123-3:2023) | |
| Inland navigation vessels - Small floating working machines - Requirements and test methods (ISO 20650:2025) | |
| Intelligent transport systems - Fast service announcement protocol (FSAP) (ISO 22418:2018) | |
| Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Classification of medical beam delivery systems (ISO 22248:2020) | |
| Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 2: Threshold determination (ISO 21254-2:2011) | |
| Leather - Chemical analysis - Determination of glutaraldehyde content (ISO/DIS 25202:2024) | |
| Leather - Measuring the colour and colour difference of finished leather (ISO/DIS 22700:2026) | |
| Leather - Physical and mechanical test methods for the determination of soiling - Part 1: Rubbing (Martindale) method (ISO/DIS 26082-1:2025) | |
| Leather - Physical and mechanical tests - Determination of soiling for domestic and contract upholstery leather (ISO/DIS 26081:2008) | |
| Leather - Physical and mechanical tests - Determination of surface coating thickness (ISO/DIS 17186:2026) | |
| Leather - Physical and mechanical tests - Part 1: Determination of single edge tear load (ISO/DIS 3377-1:2026) | |
| Leather - Tests for colour fastness - Change in colour with accelerated ageing (ISO/DIS 17228:2025) | |
| LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO MACHINE WASHING (ISO 15702:1998) | |
| LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO MIGRATION INTO PLASTICIZED POLY(VINYL CHLORIDE) (ISO 15701:1998) | |
| LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO MILD WASHING (ISO 15703:1998) | |
| LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO WATER SPOTTING (ISO 15700:1998) | |
| Liquid pumps and installation - General terms, definitions, quantities, letter symbols and units - Part 1: Liquid pumps (ISO 17769-1:2012) | |
| Liquid pumps and installation - General terms, definitions, quantities, letter symbols and units - Part 2: Pumping System (ISO 17769-2:2012) | |
| Machine tools safety - Turning machines - Part 1: Safety requirements (ISO/DIS 23125-1:2025) | |
| Machinery for forestry - Winches - Part 1: Dimensions, performance and safety (ISO/DIS 19472-1:2026) | |
| Manufacture of cell-based health care products - Control of microbial risks during processing (ISO 18362:2016) | |
| MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS. PART 1: BOLTS, SCREWS AND STUDS (ISO/DIS 3506-1:1995) | |
| MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS. PART 2: NUTS (ISO/DIS 3506-2:1995) | |
| MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS. PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS (ISO/DIS 3506-3:1995) | |
| Medical devices utilizing non-viable human materials - Risk management (ISO/DIS 21762:2025) | |
| Methods of test for dense shaped refractory products - Determination of resistance to abrasion at ambient temperature (ISO 16282:2007) | |
| Methods of testing cement - Chemical analysis of cement - Part 2: Analysis by X-ray fluorescence (ISO/DIS 29581-2:2007) | |
| Milk and milk products - Guidance on sample preparation for physical and chemical testing (ISO/DIS 24223:2025) | |
| Mining and earth-moving machinery - Rock drill rigs and rock reinforcement rigs - Safety requirements (ISO/DIS 18758:2025) | |
| Mobile road construction machinery - Safety - Part 1: Common requirements (ISO/DIS 20500-1:2020) | |
| Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines (ISO/DIS 20500-2:2020) | |
| Mobile road construction machinery - Safety - Part 3: Specific requirements for soil-stabilising machines and recycling machines (ISO/DIS 20500-3:2020) | |
| Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines (ISO/DIS 20500-4:2020) | |
| Mobile road construction machinery - Safety - Part 5: Mobile Specific requirements for paver-finishers (ISO/DIS 20500-5:2020) | |
| Mobile road construction machinery - Safety - Part 6: Specific requirements for mobile feeders (ISO/DIS 20500-6:2020) | |
| Mobile road construction machinery - Safety - Part 7: Specific requirements for slipform paver and texture curing machines (ISO/DIS 20500-7:2020) | |
| Monolithic (unshaped) refractory products - Part 1: Introduction and classification (ISO 1927-1:2012) | |
| Monolithic (unshaped) refractory products - Part 2: Sampling for testing (ISO 1927-2:2012) | |
| Monolithic (unshaped) refractory products - Part 3: Characterization as received (ISO 1927-3:2012) | |
| Monolithic (unshaped) refractory products - Part 4: Determination of consistency of castables (ISO 1927-4:2012) | |
| Monolithic (unshaped) refractory products - Part 5: Preparation and treatment of test pieces (ISO 1927-5:2012) | |
| Monolithic (unshaped) refractory products - Part 6: Measurement of physical properties (ISO 1927-6:2012) | |
| Monolithic (unshaped) refractory products - Part 7: Tests on pre-formed shapes (ISO 1927-7:2012) | |
| Monolithic (unshaped) refractory products - Part 8: Determination of complementary properties (ISO 1927-8:2012) | |
| Nanotechnologies - Endotoxin test on nanomaterial samples for in vitro systems - Limulus amebocyte lysate (LAL) test (ISO 29701:2010) | |
| Non-destructive testing - Characterization and verification of ultrasonic air-coupled equipment - Part 2: Probes (ISO/DIS 25222-2:2026) | |
| Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 1: Tangential radiographic inspection (ISO/DIS 20769-1:2026) | |
| Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 2: Double wall radiographic inspection (ISO/DIS 20769-2:2026) | |
| Nuclear energy - Determination of neutron fluence and displacement per atom (dpa) in reactor vessel and internals (ISO/DIS 19226:2026) | |
| Oil and gas industries including lower carbon energy - Cathodic protection of pipeline transportation systems - Part 1: On-land pipelines (ISO/FDIS 15589-1:2026) | |
| Oil and gas industries including lower carbon energy - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO/DIS 21809-3:2025) | |
| Oil and gas industries including lower carbon energy - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings (ISO/DIS 21809-5:2025) | |
| Oil and gas industries including lower carbon energy - General requirements for offshore structures (ISO/DIS 19900:2025) | |
| Oil and gas industries including lower carbon energy - Pipeline transportation systems - Design, construction and maintenance of steel cased pipelines (ISO/DIS 16440:2025) | |
| Oil and gas industries including lower carbon energy - Production assurance and reliability management (ISO/DIS 20815:2025) | |
| Oil and gas industries including lower carbon energy - Qualification testing and acceptance criteria for protective coating systems under insulation - Part 1: Liquid applied coatings (ISO/DIS 19277-1:2026) | |
| Oil and gas industries including lower carbon energy - Specific requirements for offshore structures - Part 1: Metocean design and operating considerations (ISO/DIS 19901-1:2024) | |
| Oil and gas industries including lower carbon energy - Specific requirements for offshore structures - Part 2: Seismic design procedures and criteria (ISO/FDIS 19901-2:2026) | |
| Oil and gas industries including lower carbon energy - Specific requirements for offshore structures - Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units (ISO/FDIS 19901-7:2026) | |
| Oil and gas industries including lower carbon energy - Standard cost coding system (ISO/DIS 19008:2025) | |
| Oil and gas industries including lower carbon energy - The effects of High Voltage DC interference to buried pipelines - Measures to be implemented (ISO/DIS 24695:2026) | |
| Oil and gas industries including lower carbon energy - Well integrity - Life cycle governance (ISO/DIS 16530:2024) | |
| Ophthalmic optics - Contact lenses - Part 1: Vocabulary, classification system and recommendations for labelling specifications (ISO/DIS 18369-1:2025) | |
| Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) - Information management - Part 1: Concepts and principle (ISO/DIS 19650-1:2026) | |
| Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) - Information management - Part 2: Information management process (ISO/DIS 19650-2:2026) | |
| Packaging - Transport packaging for dangerous goods - Conditions of use for recycled plastics material (ISO/DIS 16103:2025) | |
| Packaging machinery - Part 1: General safety requirements (ISO/DIS 24158-1:2025) | |
| PACKAGING. COMPLETE, FILLED TRANSPORT PACKAGES. CONDITIONING FOR TESTING (ISO 2233:1994) | |
| Paints and varnishes - Coating systems for wind-turbine rotor blades - Part 1: Minimum requirements prior and after weathering and climatic testing (ISO/DIS 19392-1:2026) | |
| Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO/FDIS 29601:2026) | |
| Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Measurement of and acceptance criteria for the dry-film thickness (ISO/DIS 19840:2000) | |
| PAINTS AND VARNISHES - DETERMINATION OF FILM THICKNESS (ISO 2808:1997) | |
| PAINTS AND VARNISHES - DETERMINATION OF SPECULAR GLOSS OF NON-METALLIC PAINT FILMS AT 20º, 60º AND 85º (ISO 2813:1994, INCLUDING TECHNICAL CORRIGENDUM 1:1997) | |
| Paints and varnishes - Evaluation of defects on coated surfaces using digital image processing - Part 1: General guidance (ISO/DIS 21227-1:2026) | |
| Paints and varnishes - Evaluation of defects on coated surfaces using digital image processing - Part 4: Evaluation of filiform corrosion on coated corrosion test samples (ISO/DIS 21227-4:2026) | |
| PAINTS AND VARNISHES -DETERMINATION OF RESISTANCE TO HUMID ATMOSPHERES CONTAINING SULFUR DIOXIDE (ISO 3231:1993) | |
| Paper and board - Determination of moisture content of a lot - Oven-drying method (ISO/DIS 287:2026) | |
| PAPER AND BOARD. SAMPLING TO DETERMINE AVERAGE QUALITY (ISO 186:1994) | |
| PARALLEL PINS, UNHARDENED STEEL AND AUSTENITIC STAINLESS STEEL (ISO/DIS 2338:1994) | |
| PERMEABLE SINTERED METAL MATERIALS. DETERMINATION OF DENSITY, OIL CONTENT AND OPEN POROSITY (ISO/DIS 2738:1996) | |
| Personal protective equipment - Protective footwear (ISO/DIS 20346:2009) | |
| Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2001) | |
| Petroleum and natural gas industries - Drilling and production equipment - Part 1: Side-pocket mandrels (ISO 17078-1:2004) | |
| Petroleum and natural gas industries - Drilling and production equipment - Part 2: Flow-control devices for side-pocket mandrels (ISO 17078-2:2007) | |
| Petroleum and natural gas industries - Drilling and production equipment - Part 2: Flow-control devices for side-pocket mandrels (ISO/DIS 17078-2:2025) | |
| Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 2: Single layer fusion-bonded epoxy coatings (ISO/DIS 21809-2:2020) | |
| Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2001) | |
| Petroleum and natural gas industries - Life cycle costing - Part 1: Methodology (ISO 15663-1:2000) | |
| Petroleum and natural gas industries - Offshore production installations - Requirements and guidelines for emergency response (ISO 15544:2000) | |
| Petroleum and natural gas industries - Pipeline transportation systems - Design, construction and maintenance of steel cased pipelines (ISO 16440:2016) | |
| Petroleum and natural gas industries - Pipeline transportation systems - Test procedures for mechanical connectors (ISO 21329:2004) | |
| Petroleum and natural gas industries - Shell-and-tube heat exchangers (ISO 16812:2002) | |
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 1: Metocean design and operating considerations (ISO/DIS 19901-1:2003) | |
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 3: Topsides structure (ISO 19901-3:2010) | |
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 3: Topsides structure (ISO 19901-3:2014) | |
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 5: Weight control during engineering and construction (ISO 19901-5:2016) | |
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 5: Weight control during engineering and construction (ISO/DIS 19901-5:2001). | |
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 6: Marine operations (ISO 19901-6:2009) | |
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units (ISO/DIS 19901-7:2017) | |
| Petroleum and natural gas industries - Steel pipe for pipeline transportation systems (ISO/DIS 3183:2005) | |
| Petroleum and related products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method (ISO/DIS 20846:2025) | |
| Petroleum and related products from natural or synthetic sources - Determination of distillation characteristics at atmospheric pressure (ISO/DIS 3405:2025) | |
| Petroleum liquids - Manual sampling (ISO/DIS 3170:2023) | |
| PETROLEUM LIQUIDS. AUTOMATIC PIPELINE SAMPLING (ISO 3171:1988) | |
| PETROLEUM LIQUIDS. MANUAL SAMPLING (ISO 3170:1988, INLUDING AMENDMENT 1:1998) | |
| PETROLEUM PRODUCTS - CORROSIVENESS TO COPPER - COPPER STRIP TEST (ISO 2160:1985, INCLUDING CORRIGENDUM 1:1993) | |
| Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection (ISO 24817:2015) | |
| Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection (ISO 24817:2017, Corrected version 2018-01-01) | |
| Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and integrity management (ISO/DIS 24817:2025) | |
| Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coatings and linings - Part 1: Elastomeric coating systems-polychloropr ene or EPDM (ISO 18797-1:2016) | |
| Petroleum, petrochemical and natural gas industries - Flare details for general refinery and petrochemical service (ISO 25457:2008) | |
| Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics (ISO 23936-1:2009) | |
| Petroleum, petrochemical and natural gas industries - Pressure-relieving and depressuring systems (ISO 23251:2006) | |
| Petroleum, petrochemical and natural gas industries - Production assurance and reliability management (ISO 20815:2008) | |
| Petroleum, petrochemical and natural gas industries - Test methods for quality control of microstructure of ferritic/austenitic (duplex) stainless steels (ISO 17781:2017) | |
| Petroleum, petrochemical and natural gas industries - Venting of atmospheric and low-pressure storage tanks (ISO/DIS 28300:2011) | |
| Petroleun and natural gas industries. Specific requirements for offshore structures. Part 2: Seismic design procedures and criteria (ISO/DIS 19901-2:2003) | |
| Pigments, dyestuffs and extenders - Vocabulary - Part 1: General terms (ISO/DIS 18451-1:2026) | |
| Pigments, dyestuffs and extenders - Vocabulary - Part 2: Classification of colouring materials according to colouristic and chemical aspects (ISO/DIS 18451-2:2026) | |
| Plastic containers for intravenous injections (ISO/DIS 15747:2025) | |
| Plastics - Acrylonitrile-butadi ene-styrene (ABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO/DIS 19062-2:2025) | |
| PLASTICS - ACRYLONITRILE/BUTADI ENE/STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 2580-1:1997) | |
| PLASTICS - AMINOPLASTIC MOULDING MATERIALS - DETERMINATION OF VOLATILE MATTER (ISO 3671:1976) | |
| PLASTICS - COMPRESSION MOULDING OF TEST SPECIMENS OF THERMOSETTING MATERIALS (ISO 295:1991) | |
| Plastics - Determination of ash - Part 1: General methods (ISO/DIS 3451-1:2025) | |
| PLASTICS - DETERMINATION OF ASH - PART 5: POLY(VINYL CHLORIDE) (ISO 3451-5:1989) | |
| Plastics - Determination of flexural properties (ISO/DIS 178:2026) | |
| PLASTICS - DETERMINATION OF HARDNESS - PART 1: BALL INDENTATION METHOD(ISO 2039-1:1993) | |
| PLASTICS - DETERMINATION OF TIME-TEMPERATURE LIMITS AFTER PROLONGED EXPOSURE TO HEAT (ISO 2578:1993) | |
| PLASTICS - DETERMINATION OF VISCOSITY NUMBER AND LIMITING VISCOSITY NUMBER - PART 3: POLYETHYLENES AND POLYPROPYLENES. (ISO 1628-3:1991, INCLUDING CORRIGENDUM 1:1992) | |
| PLASTICS - EPOXY COMPOUNDS - DETERMINATION OF EPOXY EQUIVALENT (ISO/DIS 3001:1997) | |
| PLASTICS - EPOXY RESINS - PART 1: DESIGNATION (ISO 3673-1:1996) | |
| PLASTICS - IMPACT-RESISTANT POLYSTYRENE (PS-I) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 2897-1:1997) | |
| PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS - PART 1: GENERAL PRINCIPLES, AND MOULDING OF MULTIPURPOSE AND BAR TEST SPECIMENS (ISO 294-1:1996) | |
| PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS - PART 2: SMALL TENSILE BARS (ISO 294-2:1996) | |
| PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS - PART 3: SMALL PLATES (ISO 294-3:1996) | |
| PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS - PART 4: DETERMINATION OF MOULDING SHRINKAGE (ISO 294-4:1997) | |
| PLASTICS - LIQUID RESINS - DETERMINATION OF DENSITY BY THE PYKNOMETER METHOD (ISO 1675:1985) | |
| PLASTICS - PHENOL FORMALDEHYDE MOULDINGS - DETECTION OF FREE AMMONIA (ISO 172:1978) | |
| PLASTICS - PHENOLIC MOULDING MATERIALS - DETERMINATION OF ACETONE-SOLUBLE MATTER (APPARENT RESIN CONTENT OF MATERIAL IN THE UNMOULDED STATE). (ISO 308:1994) | |
| PLASTICS - POLYAMIDES - DETERMINATION OF VISCOSITY NUMBER. (ISO 307:1994). | |
| PLASTICS - STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING (ISO/DIS 291:1996) | |
| PLASTICS - UNSATURATED POLYESTER RESINS - DETERMINATION OF HYDROXIL VALUE (ISO 2554:1997) | |
| PLASTICS - UNSATURATED POLYESTER RESINS - MEASUREMENT OF GEL TIME AT 25 ºC (ISO 2535:1997) | |
| PLASTICS - VINYL CHLORIDE HOMOPOLYMER AND COPOLYMER RESINS - SIEVE ANALYSIS IN WATER (ISO 1624:1978) | |
| Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and... | |
| PLASTICS. CELLULOSE ACETATE. DETERMINATION OF INSOLUBLE PARTICLES (ISO 1598:1990) | |
| PLASTICS. FREE-FLOWING EPOXI-RESIN (EP) COMPRESSION - AND INJECTION - MOULDING MATERIALS. PART 3: REQUIREMENTS FOR SELECTED EP MOULDING MATERIALS (ISO/DIS 15252-3:1997) | |
| PLASTICS. PREPARATION OF TEST SPECIMENS BY MACHINING (ISO 2818:1994) | |
| PLASTICS. THERMOPLASTICS MATERIALS. DETERMINATION OF VICAT SOFTERING TEMPERATURE (VST) (ISO 306:1994) | |
| PLASTICS. UNPLASTICIZED CELLULOSE ACETATE. DETERMINATION OF ACETIC ACID YIELD (ISO 1597:1994) | |
| Pressure relief valves for transportable refillable cylinders for liquefied petroleum gas (LPG) (ISO/DIS 28622:2008) | |
| Protective clothing - High visibility warning clothing for high risk situations - Test methods and requirements (ISO/DIS 20471:2026) | |
| Protective clothing - Performance requirements and test methods for protective clothing against infective agents (ISO/DIS 22615:2025) | |
| Protective clothing - Performance requirements for protective clothing worn by operators applying pesticides and for re-entry workers (ISO/DIS 27065:2025) | |
| Protective clothing for firefighters - Laboratory test methods and performance requirements for wildland firefighting clothing (ISO/DIS 15384:2025) | |
| Protective clothing for protection against chemicals - Classification, labelling and performance requirements - Part 1: General requirements (ISO/DIS 16602-1:2025) | |
| Protective clothing for protection against chemicals - Classification, labelling and performance requirements - Part 2: Physical test methods, classification and requirements (ISO/DIS 16602-2:2025) | |
| Protective clothing for protection against chemicals - Classification, labelling and performance requirements - Part 3: Chemical test methods, classification and requirements (ISO/DIS 16602-3:2025) | |
| Protective clothing for protection against chemicals - Classification, labelling and performance requirements - Part 4: Test methods, classification and requirements for specific designs and ensemble components including gloves, footwear, and... | |
| Protective clothing for protection against chemicals - Classification, labelling and performance requirements - Part 5: Garment test methods, classification and requirements (ISO/DIS 16602-5:2025) | |
| Protective clothing for protection against chemicals - Classification, labelling and performance requirements - Part 6: Guidance for Selection, Use, Care and Maintenance (ISO/DIS 16602-6:2025) | |
| Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks (ISO/FDIS 374-1:2024) | |
| Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements for micro-organisms risks (ISO/FDIS 374-5:2024) | |
| Protective gloves for pesticide operators - Performance requirements (ISO/DIS 18889:2017) | |
| Public transport - Interoperable fare management system - Part 1: Architecture (ISO 24014-1:2015) | |
| PULP, PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF 7 SPECIFIED POLYCHLORINATED BIPHENYLS (PCB) (ISO/DIS 15318:1997) | |
| Radiation protection - Dose assessment for the monitoring of workers for internal radiation exposure (ISO 27048:2011) | |
| Radiological protection - Characteristics of reference pulsed radiation - Part 1: Photon radiation (ISO/DIS 18090-1:2025) | |
| Railway applications - Driving simulator for drivers' training (ISO 23019:2022) | |
| Refrigerated food lockers - Thermal and energy performance, ratings, environmental test conditions and associated testing methods (ISO/DIS 19424:2025) | |
| Requirements for sleeping bags (ISO/DIS 23537:2013) | |
| Requirements for the training of citizen science divers (ISO/DIS 25325:2025) | |
| Rheology - Part 3: Test procedure and examples for the evaluation of results when using rotational and oscillatory rheometry (ISO/DIS 3219-3:2025) | |
| RUBBER HOSE, TEXTILE REINFORCED, FOR COMPRESSED AIR - SPECIFICATION (ISO 2398:1995) | |
| Rubber or plastic coated fabrics - Mechanical properties - Determination of the elongation under load and the residual deformation (ISO/DIS 18636:2025) | |
| RUBBER OR PLASTICS-COATED FABRICS. DETERMINATION OF ROLL CHARACTERISTICS. PART 1: METHODS FOR DETERMINATION OF THE LENGTH, WIDTH AND NET MASS (ISO 2286-1:1998) | |
| RUBBER OR PLASTICS-COATED FABRICS. DETERMINATION OF ROLL CHARACTERISTICS. PART 2: METHODS FOR DETERMINATION OF THE TOTAL MASS PER UNIT AREA, MASS PER UNIT AREA OF COATING AND MASS PER UNIT... | |
| RUBBER OR PLASTICS-COATED FABRICS. DETERMINATION OF ROLL CHARACTERISTICS. PART 3: METHODS FOR DETERMINATION OF THICKNESS (ISO 2286-3:1998) | |
| Safety footwear for users of handheld chain saws (ISO/DIS 17249:2025) | |
| Safety of machinery - Instruction handbook - General drafting principles (ISO/DIS 20607:2025) | |
| Safety of machinery - Mechanical safety data for physical contacts between moving machinery and persons (ISO/DIS 21260:2018) | |
| Safety requirements - Vehicle washing systems (ISO/DIS 27281:2025) | |
| Safety, protective, occupational and specific job-related footwear for professional use - Shoe laces (ISO/DIS 18691:2002) | |
| Seal-less rotodynamic pumps - Class II - Specification (ISO/FDIS 15783:2026) | |
| Security and resilience - Community resilience - Guidelines for planning the involvement of spontaneous volunteers (ISO 22319:2017) | |
| Security and resilience - Crisis management - Concept, principles and framework (ISO/DTS 22360:2023) | |
| Sediment, Soil, sludge and waste - Analysis of PFAS by HPLC and mass spectrometry (ISO/DIS 25652:2025) | |
| Simultaneous interpreting - Interpreters’ working environment - Part 4: Requirements and recommendations for signed language interpreting (ISO/DIS 17651-4:2025) | |
| SINTERED METAL MATERIALS, EXCLUDING HARDMETALS. DETERMINATION OF TRANSVERSE RUPTURE STRENGTH (ISO 3325:1996) | |
| SINTERED METAL MATERIALS, EXCLUDING HARDMETALS. TENSILE TEST PIECES (ISO/DIS 2740:1996) | |
| SIZE DESIGNATION OF CLOTHES - DEFINITIONS AND BODY MEASUREMENT PROCEDURE (INCLUDES ISO 3635:1981/DAM 1) | |
| Small craft - Electric navigation lights (ISO/FDIS 16180:2007) | |
| Small craft - Electrical systems used for electrical propulsion (ISO/FDIS 16315:2025) | |
| Soil quality - Determination of carbon and nitrogen by near-infrared spectrometry (NIRS) (ISO 17184:2014) | |
| Soil quality - Determination of selected organotin compounds - Gas-chromatographic method (ISO/FDIS 23161:2016) | |
| Soil quality - Determination of total cyanide and easily liberatable cyanide - Continuous-flow analysis method (ISO 17380:2013) | |
| Soil quality - Digital exchange of soil-related data (ISO 28258:2013) | |
| Soil quality - Effects of contaminants on Enchytraeidae (Enchytraeus sp.) - Determination of effects on reproduction (ISO 16387:2014) | |
| Soil quality - Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers - Static headspace method (ISO 22155:2016) | |
| Soil quality - Guidance on the ecotoxicological characterization of soils and soil materials (ISO/DIS 15799:2025) | |
| Soil quality - Inhibition of reproduction of the soil mite (Hypoaspis (Gaeolaelaps) aculeifer) by soil contaminants (ISO/DIS 21285:2025) | |
| Soil quality - Plant-based test to assess the environmental bioavailability of trace elements to plants (ISO 16198:2015) | |
| Soil quality - Procedure for site-specific ecological risk assessment of soil contamination (soil quality TRIAD approach) (ISO/DIS 19204:2026) | |
| Soil quality - Risk-based petroleum hydrocarbons - Part 1: Determination of aliphatic and aromatic fractions of volatile petroleum hydrocarbons using gas chromatography (static headspace method) (ISO 16558-1:2015) | |
| Soil quality - Risk-based petroleum hydrocarbons - Part 2: Determination of aliphatic and aromatic fractions of semi-volatile petroleum hydrocarbons using gas chromatography with flame ionization detection (GC/FID) (ISO/TS 16558-2:2015) | |
| Soil quality - Sampling of soil invertebrates - Part 1: Hand-sorting and extraction of earthworms (ISO/DIS 23611-1:2025) | |
| Soil quality - Sampling of soil invertebrates - Part 5: Sampling and extraction of soil macro-invertebrates (ISO 23611-5:2011) | |
| Soil quality - Sampling of soil invertebrates - Part 6: Guidance for the design of sampling programmes with soil invertebrates (ISO/DIS 23611-6:2025) | |
| Soil, waste, treated biowaste and sludge - Determination of total organic carbon (TOC) by dry combustion (ISO/DIS 15936:2025) | |
| Solar energy - Collector fields - Check of performance (ISO/DIS 24194:2025) | |
| Solid biofuels - Fuel specifications and classes - Part 8: Graded thermally treated and densified biomass fuels (ISO/DIS 17225-8:2016) | |
| Solid biofuels and pyrogenic biocarbon - Determination of sulfur and chlorine content (ISO/DIS 16994:2025) | |
| Solid recovered fuels - Determination of self-heating - Part 1: Isothermal calorimetry (ISO/DIS 21911-1:2022) | |
| SPACE PROJECT MANAGEMENT. INTEGRATED LOGISTIC SUPPORT (ISO/DIS 16091:1998) | |
| Space systems - Functional and technical specifications (ISO 21351:2005) | |
| Space systems - Risk management (ISO 17666:2003) | |
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys... | |
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminium castings (ISO/DIS 15614-4:2021) | |
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys (ISO/DIS 15614-6:2021) | |
| Spices and condiments - Preparation of a ground sample for analysis (ISO/FDIS 2825:2026) | |
| STARCH. DETERMINATION OF MOISUTRE CONTENT. OVEN-DRYING METHOD (ISO 1666:1996) | |
| Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 1: Manual reference method (ISO/DIS 16911-1:2025) | |
| Stationary training equipment - Part 10: Exercise bicycles with a fixed wheel or without freewheel - Additional specific safety requirements and test methods (ISO/DIS 20957-10:2026) | |
| Stationary training equipment - Part 5: Stationary exercise bicycles and upper body crank training equipment, additional specific safety requirements and test methods (ISO/DIS 20957-5:2026) | |
| STEEL AND STEEL PRODUCTS. LOCATION OF SAMPLES AND TEST PIECES FOR MECHANICCAL TESTING (ISO/DIS 377:1995) | |
| Sterilization of health care products - Moist heat - Requirements for sterilizers used for the terminal sterilization of aqueous liquid in sealed containers (ISO/DIS 19253:2026) | |
| Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment - Test method to determine the resistance to wet bacterial penetration (ISO/DIS 22610:2015)... | |
| Sustainable and traceable cocoa - Part 1: Requirements for cocoa sustainability management systems (ISO/FDIS 34101-1:2018) | |
| Sustainable and traceable cocoa - Part 2: Requirements for performance (related to economic, social, and environmental aspects) (ISO/FDIS 34101-2:2018) | |
| TECHNICAL PRODUCT DOCUMENTATION. LETTERING. PART 0: GENERAL REQUIREMENTS (ISO/DIS 3098-0:1996) | |
| TECHNICAL PRODUCT DOCUMENTATION. LETTERING. PART 5: CAD LETTERING OF THE LATIN ALPHABET, NUMERALS AND MARKS (ISO/DIS 3098-5:1996) | |
| Textile conveyor belts - Full thickness tensile strength, elongation at break and elongation at the reference load - Test method (ISO 283:2015) | |
| Textile floor coverings - Guidelines for maintenance and cleaning (ISO/DIS 21868:2002) | |
| Textile floor coverings and textile floor coverings in tile form - Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane... | |
| Textile floor coverings. Guidance on maintenance and cleaning. Complementary element (ISO/DIS 21868:2009) | |
| Textiles - Determination of total halogens from textile products - Method using combustion and ion chromatography (C-IC) (ISO/DIS 20999:2025) | |
| TEXTILES - DRY CLEANING AND FINISHING - PART 1: METHOD FOR ASSESSING THE CLEANABILITY OF TEXTILES (ISO/DIS 3175-1:1996) | |
| TEXTILES - DRY CLEANING AND FINISHING - PART 2: PROCEDURES FOR TETRACHLOROETHENE (ISO/DIS 3175-2:1996) | |
| Textiles - Man-made fibres - Generic names (ISO/DIS 2076:2025) | |
| Textiles - Method for assessing appearance of apparel and other textile end products after domestic washing and drying (ISO/DIS 15487:2026) | |
| Textiles - Method for determination of alkylphenols (AP) (ISO/DIS 21084:2026) | |
| Textiles - Qualitative analysis proteomic analysis of protein fibres from leather - Peptide detection using MALDI-TOF MS (ISO/DIS 25353:2025) | |
| Textiles - Quantitative chemical analysis - Part 1: General principles of testing (ISO/DIS 1833-1:2025) | |
| Thermal insulation for building equipment and industrial installations. Thermal transmittance. Determination of correction terms (ISO/DIS 23995:2004) | |
| THERMAL INSULATION OF EQUIPMENT IN BUILDINGS. CALCULATION OF WATER VAPOUR DIFFUSION. COLD PIPE INSULATION (ISO/DIS 15758:1998) | |
| Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys - Part 1: Planning of the corrosion protection system - Component design considerations and quality requirements... | |
| Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys - Part 2: Conditions for execution of corrosion protection works by thermal spray processes (ISO/DIS 2063-2:2014)... | |
| Thermoplastic materials for piping systems - Determination of resistance to slow crack growth under cyclic loading - Cracked Round Bar (CRB) test method (ISO/DIS 18489:2025) | |
| Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 2:Concept phase (ISO/FDIS 25119-2:2018) | |
| TRACTORS, MACHINERY FOR AGRICULTURE AND FORESTRY, POWERED LAWN AND GARDEN EQUIPMENT. SYMBOLS FOR OPERATOR CONTROLS AND OTHER DISPLAYS. PART 3: SYMBOLS FOR POWERED LAWN AND GARDEN EQUIPMENT. (ISO 3767-3:1988) | |
| UV-C Devices - Safety information - Permissible human exposure (ISO/DIS 15858:2025) | |
| Venting atmospheric and low-pressure storage tanks (ISO/DIS 28300:2025) | |
| Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their... | |
| Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel (ISO/DIS 28706-4:2025) | |
| VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CITRIC ACID AT ROOM TEMPERATURE (ISO 2722:1997) | |
| Water quality - Analysis of microplastic in water - Part 3: Thermo-analytical methods for waters with low content of suspended solids including drinking water (ISO/DIS 16094-3:2024) | |
| Water quality - Determination of polybrominated diphenyl ethers (PBDE) in sediment, suspended particulate matter and biota - Method using gas chromatography coupled with tandem mass spectrometry (GC-MS/MS) or with high... | |
| Water quality - Plutonium and neptunium - Test method using ICP-MS (ISO/DIS 20899:2026) | |
| Water quality - Sampling, capture and preservation of environmental DNA from water (ISO/DIS 17805:2025) | |
| Water quality - Technetium-99- Part 1: Test method using liquid scintillation counting (ISO/DIS 22125-1:2026) | |
| Water quality. Determination of Salmonella species (ISO/DIS 19250:2003) | |
| Welding ¿ Welding of reinforcing steel (ISO/DIS 17660:2021) | |
| Welding - Welding of reinforcing steel - Part 1: Load-bearing welded joints (ISO/DIS 17660-1:2017) | |
| Welding - Welding of reinforcing steel - Part 2: Non load-bearing welded joints (ISO/DIS 17660-2:2017) | |
| Welding and allied processes - Measurement of arc energies (ISO/FDIS 18491:2026) | |
| Welding consumables - Covered electrodes for manual metal arc welding of high-strength steels - Classification (ISO/DIS 18275:2025) | |
| Welding of reinforcing steel (ISO/DIS 17660:2002) | |
| Wheat and wheat flour - Gluten content - Part 2: Determination of wet gluten and gluten index by mechanical means (ISO/DIS 21415-2:2025) | |
| Woodworking machines - Safety - Part 10: Building site saws (contractor saws) (ISO/DIS 19085-10:2025) | |
| Woodworking machines - Safety - Part 16: Table band saws and band re-saws (ISO/DIS 19085-16:2026) | |
| Woodworking machines - Safety - Part 1: Common requirements (ISO/DIS 19085-1:2025) | |
| Woodworking machines - Safety - Part 20: Horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws) (ISO/DIS 19085-20:2024) | |
| Woodworking machines - Safety - Part 21: Double blade circular sawing machines for cross-cutting with integrated feed (ISO/DIS 19085-21:2025) | |
| Woodworking machines - Safety - Part 22: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines (ISO/DIS 19085-22:2024) | |
| Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machine (ISO/DIS 19085-2:2026) | |
| Woodworking machines - Safety - Part 3: Numerically controlled (NC/CNC) boring and routing machines (ISO/DIS 19085-3:2026) | |
| Woodworking machines - Safety - Part 5: Dimension saws (ISO/DIS 19085-5:2026) | |
| Zinc and zinc alloys. Part 1: Optical emission spectrometric analysis of solid samples (ISO/DIS 3815-1:2003) | |
| Zinc and zinc alloys. Part 2: Inductively coupled plasma optical emission spectrometric analysis (ISO/DIS 3815-2:2003) |
| << Prev | Next >> |