AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| 0,6/1 kV and 1,9/3,3 kV power cables with special fire performance for use in power stations | |
| 3-D scanning methodologies for internationally compatible anthropometric databases (ISO 20685:2010) | |
| Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions | |
| Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate precision and alternative designs for collaborative studies | |
| Accuracy (trueness and precision) of measurement methods and results — Part 4: Basic methods for the determination of the trueness of a standard measurement method | |
| ACOUSTICS. TEST CODE FOR THE MEASUREMENT OF AIRBORNE NOISE EMITTED BY ROTATING ELECTRICAL MACHINERY (REVISION OF ISO 1680-1:1986 AND ISO 1680-2:1986) | |
| Advanced technical ceramic - Ceramic composites - Methods of test for reinforcements - Part 6: Determination of tensile properties of filaments at high temperature | |
| Advanced technical ceramics- Ceramic composites- Methods of test for reinforcements- Part 5: Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow... | |
| Aerospace series - Delegated Product Release Verification | |
| Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 005: Authentication and Verification | |
| Aerospace series - Quality management systems - Data Matrix Quality Requirements for Parts Marking | |
| Agricultural irrigation equipment. Volumetric valves. General requirements and test methods | |
| Agricultural vehicles -- Mechanical connections on towed vehicles -- Dimensions for hitch rings | |
| Air interface protocol for local broadcasting - Part 1: Uni-directional multilingual broadcasting (TA 4) | |
| Air quality. Exchange of data. Part 1: General data format. | |
| Air quality. General aspects. Vocabulary | |
| Air quality. Test method for filtration characterization of cleanable filter media | |
| Alarm systems - Alarm transmission systems and equipment - Part 9: Requirements for common protocol for alarm transmission using the Internet protocol | |
| Amendment 1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-16: Particular requirements for hand-held fastener driving tools | |
| Amendment 1 - Low-voltage electrical installations - Part 8-82: Functional aspects - Prosumer's low-voltage electrical installations | |
| AMENDMENT 1 OF ISO 10555-1 STERILE, SINGLE-USE INTRAVASCULARCATHETE RS. PART 1:1995 - GENERAL REQUIREMENTS | |
| ANIMAL FEEDING STUFFS - DETERMINATION OF AVAILABLE LYSINE | |
| ANIMAL FEEDING STUFFS - DETERMINATION OF NITROGEN CONTENT AND CALCULATION OF CRUDE PROTEIN CONTENT - KJELDAHL METHOD | |
| Animal feeding stuffs - PCR typing of probiotic strains of Saccharomyces cerevisiae (yeast) | |
| Animal feeding stuffs. Preparation of test samples | |
| Assembly tools for screws and nuts -- Screwdrivers for cross-recessed head screws -- Part 1: Driver tips | |
| Assessment of electric welding equipment related to restrictions of human exposure to electromagnetic fields (0 Hz - 300 GHz) - Part 1: Product family standard | |
| Audio reproduction method for normalized loudness level | |
| Audio, video and information technology equipment - Routine electrical safety testing in production | |
| Audio, video and multimedia systems and equipment - Digital television accessibility - Functional specifications | |
| Blankets of insulating material for electrical purposes | |
| Building and civil engineering drawings - Installations - Part 2: Simplified representation of sanitary appliances | |
| Building automation and control systems (BACS) - Part 5: Data communication protocol (ISO 16484-5:2014) | |
| Building automation and control systems (BACS) - Part 6: Data communication conformance testing (ISO 16484-6:2014) | |
| Building automation and control systems - Part 5: Data communication protocol (ISO 16484-5:2010) | |
| Building automation and control systems - Part 5: Data communication protocol (ISO 16484-5:2012) | |
| Building construction machinery and equipment — Internal vibrators for concrete — Vocabulary and commercial specifications | |
| BUILDING CONSTRUCTION. SEALANTS FOR JOINTS. DETERMINATION OF CHANGE IN MASS AND VOLUME | |
| BUILDING CONSTRUCTION. SEALANTS. DETERMINATION OF ADHESION/COHESION PROPERTIES AFTER IMMERSION IN WATER | |
| BUILDING CONSTRUCTION. SEALANTS. DETERMINATION OF ADHESION/COHESION PROPERTIES AT MAINTAINED EXTENSION AFTER IMMERSION IN WATER | |
| BUILDING CONSTRUCTION. SEALANTS. DETERMINATION OF ADHESION/COHESION PROPERTIES AT VARIABLE TEMPERATURES | |
| BUILDING CONSTRUCTION. SEALANTS. DETERMINATION OF RESISTANCE TO COMPRESSION | |
| BUILDING CONSTRUCTION. TOLERANCES. EXPRESSION OF DIMENSIONAL ACCURACY. PRINCIPLES AND TERMINOLOGY | |
| Building intercom system - Part 1-2: System requirements - Building intercom systems using the internet protocol (IP) | |
| Building intercom systems - Part 1-1: System requirements - General | |
| Cellular plastics. Determination of horizontal burning characteristics of small specimens subjected to a small flame. | |
| CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES. PART 1: DETERMINATION OF MEAN PROFILE DEPTH. | |
| Characterization of waste - Leaching behaviour tests - Influence of pH on leaching with initial acid/base addition | |
| Classification of dense shaped refractory products - Part 4: Special products (ISO 10081-4:2014) | |
| Climate change adaptation — Requirements and guidance on adaptation planning for local governments and communities | |
| Climate change management — Transition to net zero — Part 1: Carbon neutrality | |
| Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2013) | |
| Compliance management systems. Guidelines for the evaluation of effectiveness. | |
| Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors | |
| Concrete - Release of regulated dangerous substances into soil, groundwater and surface water - Test method for new or unapproved constituents of concrete and for production concretes | |
| Conflict of interest in organizations. Guidance. | |
| Conformity assessment — Guidelines for validation and verification programmes | |
| Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 11: Competence requirements for auditing and certification of facility management (FM) management systems. | |
| Conformity assessment - Supplier's declaration of conformity - Part 1: General requirements (ISO/IEC 17050-1:2004, corrected version 2007-06-15) | |
| Consumer terminal function for access to IPTV and open internet multimedia services - Part 2-1: Media formats | |
| Consumer terminal function for access to IPTV and open internet multimedia services - Part 2-2: HTTP adaptive streaming | |
| Consumer terminal function for access to IPTV and open internet multimedia services - Part 3: Content metadata | |
| Control charts -- Part 4: Cumulative sum charts | |
| Control charts. Part 1: General guidelines | |
| Conveyor belts - Electrical conductivity - Specification and test method (ISO 284:2012) | |
| Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method (ISO 340:2013) | |
| Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for general use (ISO 14890:2013) | |
| Corrosion of metals and alloys - Corrosivity of atmospheres - Classification, determination and estimation (ISO 9223:2012) | |
| Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity (ISO 9226:2012) | |
| Corrosion of metals and alloys - Corrosivity of atmospheres - Guiding values for the corrosivity categories (ISO 9224:2012) | |
| Corrosion of metals and alloys - Corrosivity of atmospheres - Measurement of environmental parameters affecting corrosivity of atmospheres (ISO 9225:2012) | |
| Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts | |
| Cranes. Cabins. Part 2: Mobile Cranes | |
| Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods | |
| Device embedded substrate - Part 1-1: Generic specification - Test methods | |
| Digital video interface - Gigabit video interface for multimedia systems | |
| DIMENSIONAL TOLERANCES IN BUILDING CONSTRUCTION. BUILDINGS | |
| DISTRIBUTION CABLES OF RATED VOLTAGE 0,6/1 KV. | |
| Distribution cables of rated voltage 0,6/1 kV | |
| Distribution cables with extruded insulation for rated voltages from 3,6/6 (7,2) kV to 20,8/36 (42) kV. Part 5: XLPE insulated single core cables, and single core pre-assembled cables. Section E-1:... | |
| Distribution cables with extruded insulation for rated voltages from 3,6/6 (7,2) kV to 20,8/36 (42) kV. Part 9: HEPR insulated single core cables, and single core pre-assembled cables. Section E:... | |
| DISTRIBUTION CABLES WITH EXTRUDED INSULATION FOR RATED VOLTAGES FROM 3,6/6 (7,2) KV TO 20,8/36 (42) KV | |
| Document management -- Electronic content/document management data interchange format | |
| Double-capped LED lamps designed to retrofit linear fluorescent lamps - Safety specifications | |
| Durability of wood and wood-based products - Terminology | |
| Earth-moving machinery and rough-terrain trucks — Lighting, signalling and marking lights, and reflex reflectors | |
| Electric cables - Accessories - Material characterisation - Part 1: Fingerprinting and type tests for resinous compounds | |
| Electric cables - Accessories - Material characterisation - Part 2: Fingerprinting and type tests for heat shrinkable components for low voltage applications | |
| Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 2-10: Particular requirements for hand-held mixers | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws | |
| Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 2-14: Particular requirements for hand-held planers | |
| Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 2-2: Particular requirements for hand-held screwdrivers and impact wrenches | |
| Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 2-8: Particular requirements for hand-held shears and nibblers | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-13: Particular requirements for transportable drills | |
| Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-11: Particular requirements for edgers | |
| Electric vehicle conductive charging system - Part 23: DC electric vehicle supply equipment | |
| Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 GHz) - Part 2: Arc welding equipment | |
| Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs) | |
| Electrical installations of buildings - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances - Clause 443: Protection against transient overvoltages of atmospheric origin or due... | |
| Electrical installations of buildings -- Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control | |
| ELECTRICAL INSTALLATIONS OF BUILDINGS -- PART 5: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT -- CHAPTER 56: SAFETY SERVICES | |
| ELECTRICAL INSTALLATIONS OF BUILDINGS. PART 4: PROTECTION FOR SAFETY. CHAPTER 41: PROTECTION AGAINST ELECTRIC SHOCK | |
| ELECTRICAL INSTALLATIONS OF BUILDINGS. PART 5: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT. CHAPTER 52: WIRING SYSTEMS | |
| Electricity metering - Data exchange for meter reading, tariff and load control - Glossary of terms - Part 1: Terms related to data exchange with metering equipment using DLMS/COSEM | |
| Electrolyte and water for vented Lead Acid accumulators - Part 1: Requirements for electrolyte | |
| Electrolyte and water for vented Lead Acid accumulators - Part 2: Requirements for water | |
| emiconductor devices - Semiconductor interface for human body communication - Part 1: General requirements | |
| Energetic materials for defence - Safety, vulnerability - Friability | |
| Environmental labels and declarations — Principles, requirements and guidelines for communication of footprint information | |
| Environmental management systems. Guidelines for incorporating ecodesign | |
| Ergonomics of human-system interaction - Part 210: Human-centred design for interactive systems (ISO 9241-210:2010) | |
| Ergonomics of human-system interaction - Part 303: Requirements for electronic visual displays (ISO 9241-303:2011) | |
| Essential oils. Determination of acid value by two titration methods, manual and automatic | |
| Essential oils. Essential oil of sage from Spain (salvia lavandulifolia Vahl) | |
| Essential oils. Oil of red thyme, thymol type (Thymus zygis Loefl.), Spain | |
| Essential ois. Essential oil of Spanish wild marjoram (Thymus mastichina L.) | |
| Fertilizers - Determination of different forms of nitrogen in fertilizers containing nitrogen only as nitric, ammoniacal and urea nitrogen by two different methods | |
| Field Device Integration (FDI) - Part 101-1: Profiles – Foundation Fieldbus H1 | |
| Field Device Integration (FDI) - Part 101-2: Profiles - Foundation Fieldbus HSE | |
| Field Device Integration (FDI) - Part 103-1: Profiles - PROFIBUS | |
| Field Device Integration (FDI) - Part 103-4: Profiles - PROFINET | |
| Field Device Integration (FDI) - Part 109-1: Profiles - HART® and WirelessHART® | |
| Field device integration (FDI) - Part 1: Overview | |
| Field Device Integration (FDI) - Part 2: FDI Client | |
| Field Device Integration (FDI) - Part 4: FDI Packages | |
| Field Device Integration (FDI) - Part 5: FDI Information Model | |
| Field Device Integration (FDI) - Part 6: FDI Technology Mapping | |
| Field Device Integration (FDI) - Part 7: FDI Communication Devices | |
| Field Device Integration - Part 3: FDI Server | |
| Fire safety engineering — General principles — Part 1: General | |
| Fire safety engineering — Selection of design fire scenarios and design fires — Part 1: Selection of design fire scenarios | |
| Fixed firefighting systems - Water spray systems - Design, installation and maintenance | |
| Flued oil stoves with vaporizing burners | |
| Food processing machinery - Route map - Materials for food area | |
| FOOD PROCESSING MACHINERY. SAFETY AND HYGIENE REQUIREMENTS. BASIC CONCEPTS. PART 1: SAFETY REQUIREMENTS | |
| Food safety management systems. Guidance on the application of ISO 22000 | |
| Fraud control management systems. Guidance for organizations managing the risk of fraud. | |
| FREE-CUTTING STEELS. TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, HOT-ROLLED BARS AND RODS | |
| Gas analysis -- Conversion of gas mixture composition data | |
| Gas analysis -- Investigation and treatment of analytical bias | |
| Gas analysis -- Preparation of calibration gas mixtures using dynamic volumetric methods -- Part 9: Saturation method (ISO 6145-9:2009) | |
| General requirements for establishing anthropometric databases (ISO 15535:2012) | |
| GEOTECHNICS IN CIVIL ENGINEERING - IDENTIFICATION AND CLASSIFICATION OF SOILS | |
| Governance of organizations. Developing indicators for effective governance. | |
| Graphic technlogy. Process control for the production of half-tone colour separations, proofs and production prints. Part 3: Coldset offset lithography on newsprint. | |
| Graphic technology. Displays for colour proofing. Characteristics and viewing conditions | |
| Graphic technology. Laboratory preparation of test prints. Part 1: Paste inks | |
| Graphic Technology. Management of security printing processes | |
| Graphic technology. Prepress digital data exchange using PDF. Part 4: Complete exchange of CMYK and spot colour printing data using PDF 1.4 (PDF/X-1a) | |
| Graphic technology. Prepress digital data exchange using PDF. Part 6: Complete exchange of printing data suitable for colour-managed workflows using PDF 1.4 (PDF/X-3) | |
| Graphic technology. Prepress digital data exchange using PDF. Part 7: Complete exchange of printing data (PDF/X-4) and partial exchange of printing data with external profile reference (PDF/X-4p) using PDF 1.6... | |
| Graphic technology. Prints and printing inks. Assessment of resistance of prints to various agents | |
| Graphic technology. Process control for the production of half-tone colour separations, proof and production prints — Part 8: Validation print processes working directly from digital data | |
| Graphic technology. Process control for the production of half-tone colour separations, proof and production prints. Part 9: Metal decoration printing processes using offset lithography | |
| Graphic technology. Symbols for text proof correction. | |
| Graphic technology. Vocabulary. Part 2: Prepress terms | |
| Graphic technology. Vocabulary. Parte 4: Postpress terms. | |
| Graphical symbols - Public information symbols | |
| Greenhouse gases — Part 4: Guidance for the application of ISO 14064-1 | |
| Guidance for the in-house preparation of quality control materials (QCMs) | |
| Guidance on social responsibility | |
| GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT | |
| Guidelines for implementation of statistical process control (SPC) -- Part 2: Catalogue of tools and techniques | |
| Guidelines for the measurement method of nonlinearity for surface acoustic wave (SAW) and bulk acoustic wave (BAW) devices in radio frequency (RF) | |
| GX16t-5 capped tubular LED lamp - Safety specifications | |
| Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (ISO 11148-3:2012) | |
| Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools (ISO 11148-4:2012) | |
| Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2012) | |
| Health informatics - Measures for ensuring the patient safety of health software | |
| Health informatics - Personal health device communication - Part 00103: Overview (ISO/IEEE 11073-00103:2015) | |
| Health informatics - Personal health device communication - Part 10406: Device specialization - Basic electrocardiograph (ECG) (1- to 3-lead ECG) (ISO/IEEE 11073-10406:2012) | |
| Health informatics - Personal health device communication - Part 10417: Device specialization - Glucose meter (ISO/IEEE 11073-10417:2014, Corrected version 2014-06-01) | |
| Health informatics - Personal health device communication - Part 10418: Device specialization - International Normalized Ratio (INR) monitor (ISO/IEEE 11073-10418:2014, Corrected version 2014-05-01) | |
| Health informatics - Personal health device communication - Part 10420: Device specialization - Body composition analyzer (ISO 11073-10420:2012) | |
| Health informatics - Personal health device communication - Part 10421: Device specialization - Peak expiratory flow monitor (peak flow) (ISO 11073-10421:2012) | |
| Health informatics - Personal health device communication - Part 10441: Device specialization - Cardiovascular fitness and activity monitor (ISO/IEEE 11073-10441:2015) | |
| Health informatics - Personal health device communication - Part 10442: Device specialization - Strength fitness equipment (ISO/IEEE 11073-10442:2015, Corrected version 2017-11-01) | |
| Health Informatics - Personal health device communication - Part 10472: Device specialization - Medication monitor (ISO 11073-10472:2012) | |
| Health informatics - Point-of-care medical device communication - Part 10102: Nomenclature - Annotated ECG (ISO/IEEE 11073-10102:2014) | |
| Health informatics - Point-of-care medical device communication - Part 10103: Nomenclature - Implantable device, cardiac (ISO/IEEE 11073-10103:2014, Corrected version 2014-05-01) | |
| Health informatics - Point-of-care medical device communication - Part 30400: Interface profile - Cabled Ethernet (ISO 11073-30400:2012) | |
| Health Software - Part 1: General requirements for product safety | |
| HEAT RESISTING STEELS AND ALLOYS | |
| Hot rolled products of structural steels - Part 1: General (Characteristics, evaluation of conformity and marking) | |
| Household and similar electrical appliances - Safety -- Part 2-94: Particular requirements for scissor type grass shears | |
| Human resource management. Guidelines on human governance. | |
| Human resource management. Organizational culture metrics cluster. | |
| Human resources management systems. Requirements. | |
| Imaging materials. Reflection prints. Storage practices | |
| Implants for surgery - Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP) (ISO 13356:2008) | |
| Industrial electroheating equipment - Test methods for infrared emitters | |
| Information and documentation — International archives statistics | |
| Information and documentation — Library performance indicators | |
| Information and documentation — Records risks — Risk assessment for records management | |
| INFORMATION AND DOCUMENTATION - PAPER FOR DOCUMENTS - REQUIREMENTS FOR PERMANENCE | |
| Information and documentation -- Statistics on the production and distribution of books, newspapers, periodicals and electronic publications | |
| Information technology — Security techniques — Code of practice for information security controls based on ISO/IEC 27002 for cloud services | |
| Information technology - Automatic identification and data capture (AIDC) techniques - Harmonized vocabulary - Part 1: General terms relating to AIDC (ISO/IEC 19762-1:2008) | |
| Information technology - Automatic identification and data capture (AIDC) techniques - Harmonized vocabulary - Part 3: Radio frequency identification (RFID) (ISO/IEC 19762-3:2008) | |
| Information technology - Automatic identification and data capture techniques - PDF417 bar code symbology specification (ISO/IEC 15438:2006) | |
| Information technology - Governance of digital forensic risk framework (ISO/IEC 30121:2015) | |
| Information technology - Learning, education and training - Metadata for learning resources - Part 5: Educational elements (ISO/IEC 19788-5:2012) | |
| Information technology - Security techniques - Guidance on assuring suitability and adequacy of incident investigative method (ISO/IEC 27041:2015) | |
| Information technology - Security techniques - Guidelines for identification, collection, acquisition and preservation of digital evidence (ISO/IEC 27037:2012) | |
| Information technology - Security techniques - Guidelines for the analysis and interpretation of digital evidence (ISO/IEC 27042:2015) | |
| Information technology - Security techniques - Incident investigation principles and processes (ISO/IEC 27043:2015) | |
| Information technology - Security techniques - Specification for digital redaction (ISO/IEC 27038:2014) | |
| Information technology - Security techniques - Storage security (ISO/IEC 27040:2015) | |
| Information technology -- Software life cycle processes (ISO/IEC 12207:1995/AMD1:2002 ) | |
| Information technology -- Software life cycle processes (ISO/IEC 12207:1995/AMD1:2004 ) | |
| Information technology. Automatic identification and data capture techniques. Bar code master test specifications (ISO/IEC 15421:2010) | |
| Information tecnology. Automatic identification and data capture techniques. Bar code digital imaging anda printing performance testing (ISO/IEC 15419:2009) | |
| Installed monitors for the control and detection of gamma radiations contained in recyclable or non-recyclable materials transported by vehicles | |
| INTERNATIONAL VOCABULARY OF BASIC AND GENERAL TERMS IN METROLOGY | |
| Letter symbols to be used in electrical technology -- Part 1: General | |
| Letter symbols to be used in electrical technology -- Part 2: Telecommunications and electronics | |
| Light conveyor belts - Determination of electrical resistances (ISO 21178:2013) | |
| Light conveyor belts - Determination of the coefficient of friction (ISO 21182:2013) | |
| Light conveyor belts - Determination of the electrostatic field generated by a running light conveyor belt (ISO 21179:2013) | |
| Light conveyor belts - Determination of the maximum tensile strength (ISO 21180:2013) | |
| Light conveyor belts - Determination of the relaxed elastic modulus (ISO 21181:2013) | |
| Light conveyor belts - Tolerances on widths and lengths of cut light conveyor belts (ISO 15147:2012) | |
| Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods | |
| Light transmitting skin profiled plastics sheeting for internal and external roofing, wall cladding and ceiling finishes - Part 1: General requirements and test methods | |
| Lightning density based on lightning location systems (LLS) - General principles | |
| Lithium ion capacitors for use in electric and electronic equipment - Test methods for electrical characteristics | |
| Low voltage electrical installations - Part 7-721: Requirements for special installations or locations - Electrical installations in caravans and motor caravans | |
| Low-voltage electrical installations - Part 4-42: Protection for safety - Protection against thermal effects | |
| Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent | |
| Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control - Clause 534: Devices for protection against transient overvoltages | |
| Low-voltage electrical installations - Part 5: Selection and erection of electrical equipment - Clause 57: Stationary secondary batteries | |
| Low-voltage electrical installations - Part 7-702: Requirements for special installations or locations - Swimming pools and fountains | |
| Low-voltage electrical installations - Part 7-706: Requirements for special installations or locations - Conducting locations with restricted movement | |
| Low-voltage electrical installations - Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations | |
| Low-voltage electrical installations - Part 7-711: Requirements for special installations or locations - Temporary electrical installations for exhibitions and entertainment related purposes | |
| Low-voltage electrical installations - Part 7-718: Requirements for special installations or locations - Communal facilities and workplaces | |
| Low-voltage electrical installations - Part 7-722: Requirements for special installations or locations - Supply of electric vehicle | |
| Low-voltage electrical installations - Part 8-1: Energy efficiency | |
| Low-voltage electrical installations - Part 8-82: Functional aspects - Prosumer's low-voltage electrical installations | |
| Low-voltage electrical installations - Part 9-1: installation, design and safety requirements for photovoltaic systems (PV) | |
| Low-voltage fuses -- Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to I | |
| Low-voltage fuses -- Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) - Examples of standardized systems of fuses A to... | |
| Low-voltage fuses -- Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to... | |
| Low-voltage fuses -- Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications) - Examples of types of standardized of fuses A... | |
| LOW-VOLTAGE FUSES. PART 2-1: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION). SECTIONS I TO IV: EXAMPLES OF TYPES OF STANDARDIZED FUSES FOR USE... | |
| Machine tool spindles -- Evaluation of machine tool spindle vibrations by measurements on spindle housing -- Part 1: Spindles with rolling element bearings and integral drives operating at speeds between... | |
| Machine tools - Environmental evaluation of machine tools - Part 1: Design methodology for energy-efficient machine tools | |
| Machine tools -- Practical guidance and example of risk assessment on electro-discharge machines | |
| MACHINERY FOR FORESTRY. SELF-PROPELLED MACHINERY. SAFETY. | |
| Machines for mechanical processing of minerals and similar solid materials - Safety - Part 6: Specific requirements for mobile machinery | |
| Management systems for the United Nations Sustainable Development Goals SDGs — Implementation guidance | |
| Management Systems for UN Sustainable development goals – Requirements | |
| Management systems for United Nations Sustainable Development Goals (SDGs) — Requirements | |
| Marine energy - Wave, tidal and other water current converters - Part 1: Vocabulary | |
| Maritime navigation and radiocommunication equipment and systems - Integrated communication system (ICS) - Operational and performance requirements, methods of testing and required test results | |
| Market, opinion and social research, including insights and data analytics — Vocabulary and service requirements | |
| Matting of insulating material for electrical purposes. | |
| Measurement method for the output of electroshock weapons | |
| Measurement method of a half-wavelength voltage for Mach-Zehnder optical modulator in wireless communication and broadcasting systems | |
| Medical electrical equipment - Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers | |
| Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery | |
| Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment | |
| Medical electrical equipment -- Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators | |
| MEDICAL SUCTION EQUIPMENT. PART 1: ELECTRICALLY POWERED SUCTION EQUIPMENT. SAFETY REQUIREMENTS. | |
| MEDICAL SUCTION EQUIPMENT. PART 3: SUCTION EQUIPMENT POWERED FROM VACUUM OR PRESSURE SOURCE. | |
| METALLIC MATERIALS. VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES. PART 2: TENSION CREEP TESTING MACHINES. VERIFICATION OF THE APPLIED LOAD. | |
| Microbiology of food and animal feeding stuffs -- Horizontal method for the enumeration of beta-glucuronidase-p ositive Escherichia coli -- Part 2: Colony-count technique at 44 degrees C using 5-bromo-4-chloro-3-i ndolyl... | |
| Microbiology of food and animal feeding stuffs -- Horizontal method for the enumeration of beta-glucuronidase-p ositive Escherichia coli -- Part 3: Most probable number technique using 5-bromo-4-chloro-3-i ndolyl-beta-D-glucur onide | |
| Microbiology of food and animal feeding stuffs -- Horizontal methods for the detection and enumeration of Enterobacteriaceae -- Part 1: Detection and enumeration by MPN technique with pre-enrichment | |
| Microbiology of food and animal feeding stuffs -- Horizontal methods for the detection and enumeration of Enterobacteriaceae -- Part 2: Colony-count method | |
| MIDI (Musical Instrument Digital Interface) specification 1.0 (Abridged edition, 2015) | |
| Milk and milk products -- Detection of Enterobacter sakazakii | |
| Mineral insulating oils - Characterization of paraffinic/naphtheni c nature - Low temperature differential scanning calorimetry (DSC) test method. | |
| Multicore and multipair cable for installation above and below ground | |
| MULTICORE AND MULTIPAR CABLE FOR INSTALLATION ABOVE AND BELOW GROUND. | |
| Multimedia systems and equipment - Multimedia e-publishing and e-book technologies - Printing specification of texture map for auditory presentation of printed texts | |
| Nanoparticles - Vocabulary | |
| Non destructive testing - Code of practice for the approval of NDT personnel by recognised third party organisations under the provisions of Directive 97/23/EC | |
| Nuclear power plants - Instrumentation and control systems important to safety - Design and qualification of isolation devices | |
| Nuclear powers plants - Instrumentation and control important to safety - Management of ageing of sensors and transmitters - Part 1: Pressure transmitters | |
| OIL SPILL IDENTIFICATION | |
| OILSEEDS. SIMULTANEOUS DETERMINATION OF OIL AND MOISTURE CONTENTS. METHOD USING PULSED NUCLEAR MAGNETIC RESONANCE SPECTROMETRY | |
| Open IPTV Forum (OIPF) consumer terminal function and network interfaces for access to IPTV and open Internet multimedia services - Part 1: General | |
| Organic light emitting diode (OLED) panels for general lighting - Performance requirements | |
| OVERHEAD DISTRIBUTION CABLES OF RATED VOLTAGE UO/U(UM): 0,6/1 (1,2) KV | |
| Paper - Determination of light scattering and absorption coefficients (using Kubelka-Munk theory) | |
| Paper and board — Determination of alkali reserve | |
| Paper and board — Determination of CIE whiteness, D65/10° (outdoor daylight) | |
| Paper and board — Determination of colour by diffuse reflectance. Part 3: Indoor illumination conditions (D50/2°) | |
| Paper and board. Determation of resistance to bending. Part 2: Taber-type tester | |
| Paper and board. Determination of colour by diffuse reflectance. Part 1: Indoor daylight conditions (C/2º) | |
| Paper and board. Determination of colour by diffuse relfectance. Part 2: Outdoor daylight conditions (D65/10º) | |
| Paper and board. Determination of roughness/smoothness (air leak methods). Part 4: Print-surf method | |
| Paper and board. Testing of cores. Part 9: Determination of the flat crush resistance | |
| Paper, board, pulps and related terms: Vocabulary. Part 5: Properties of pulp, paper and board | |
| Paper, boards and pulps. Measurement of diffuse radiance factor (diffuse reflectance factor) | |
| Particular safety requirements for equipment to be connected to information and communication networks | |
| Passenger cars. Driver hand-control reach | |
| Plain language. Part 3: Science writing. | |
| PNE-ISO/IEC TR 29138-2 IN | |
| POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V -- PART 3: NON-SHEATHED CABLES FOR FIXED WIRING | |
| POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V -- PART 5: FLEXIBLE CABLES (CORDS) | |
| POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V -- PART 9: SINGLE CORE NON-SHEATHED CABLE FOR INSTALLATION AT LOW TEMPERATURES | |
| Postal services - Open standard interface between image controller and enrichment devices (OCRs, video coding systems, voting systems) | |
| Power cables having rated voltages from 3,6/6 (7,2) kV up to and including 20,8/36 (42) kV with special fire performance for use in power stations | |
| POWER CABLES WITH EXTRUDED INSULATION AND THEIR ACCESORIES FOR RATED VOLTAGES ABOVE 36 KV (UM = 42 KV) UP TO 150 KV (UM = 170 KV) | |
| Power cables with extruded insulation and their accessories for rated voltages above 36 kV (Um = 42 kV) up to 150 kV (Um = 170 kV) | |
| Power sources for a wireless communication device - Part 1: General requirements of power modules | |
| Power sources for a wireless communication device - Part 2: Profile for power modules with batteries | |
| Power sources for a wireless communication device - Part 3: Generic energy harvesting adaptor module | |
| Precast concrete products - Concrete finishes - Identification | |
| Printed electronics - Materials - Part 1 : Substrates | |
| Printing electronics - Materials - Part 2-1: Conductive material Ink | |
| Procedure for declaration of materials in products of the electrotechnical and electronics industry (DIN 19220) | |
| Production equipment for microsystems -- Interface between end effector and handling system | |
| Pulp, paper and board - Determination of water-soluble chlorides | |
| Pulp, paper and board. Determination of total chlorine and organically bound chlorine | |
| Pulps. Determination of lignin content. Acid hydrolysis method | |
| Quality Evaluation Method for the Sound Field of Directional Loudspeaker Array System | |
| Quantities and units - Part 7: Light (ISO 80000-7:2008) | |
| Radiation protection instrumentation - Installed personnel surface contamination monitoring assemblies | |
| Radiation protection instrumentation - Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma and beta radiations - Direct reading personal dose equivalent and/or dose equivalent rate dosemeters | |
| RADIO EQUIPMENT AND SYSTEMS (RES). LAND MOBILE SERVICE. TECHNICAL CHARACTERISTICS AND TEST CONDITIONS FOR NON-SPEECH AND COMBINED ANALOGUE SPEECH/NON SPEECH EQUIPMENT WITH AN INTERNAL OR EXTERNAL ANTENNA CONNECTOR INTENDED FOR... | |
| Railway applications - Classification system for rail vehicles - Part 2: Product groups | |
| Railway applications - Designation systematic for rail vehicles - Part 4: Designation of installation sites and locations | |
| Railway applications - Designation systematic for railway vehicles - Part 1: General rules | |
| Railway applications - Hydrogen and fuel cell systems for rolling stock - Part 2: Hydrogen fuel system | |
| RAILWAY COMPONENTS. TECHNICAL DELIVERY REQUIREMENTS. PART 3: STEEL SLEEPERS. | |
| RAPESEED. DETERMINATION OF GLUCOSINOLATES CONTENT. PART 2: METHOD BY X FLUORESCENCE | |
| RECIPROCATING INTERNAL COMBUSTION ENGINES. EXHAUST EMISSION MEASUREMENT. PART 3: DEFINITIONS AND METHODS OF MEASUREMENT OF EXHAUST GAS SMOKE UNDER STEADY-STATE CONDITIONS | |
| Recommendations for small renewable energy and hybrid systems for rural electrification - Part 7-1: Generators - Photovoltaic arrays | |
| Reference materials - Selected terms and definitions | |
| Refrigerants - Designation and safety classification | |
| Risk management — Guidelines for the management of legal risk | |
| Road vehicles - Compressed natural gas (CNG) refuelling connector - Part 1: 20 MPa (200 bar) connector (ISO 14469-1:2004) | |
| Road vehicles - Compressed natural gas (CNG) refuelling connector - Part 2: 20 MPa (200 bar) connector, size 2 (ISO 14469-2:2007) | |
| Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 3: On-board transmitter simulation | |
| Road vehicles. 60 V and 600 V single-core cables. Part 2: Dimensions test methods and requirements for aluminium conductor cables. | |
| Road vehicles. Diagnostic systems. Keyword Protocol 2000. Part 2: Data link layer | |
| Road vehicles. H-point machine (HPM II). Specifications and procedure for H-point determination | |
| Road vehicles. Holding test of coatings influencing the colour of light emitted by light source(s). Test methods | |
| Road vehicles. Multi-core connecting cables. Part 3: Construction, dimensions and marking of unscreened sheathed low-voltabe cables | |
| Road vehicles. Roof load carriers | |
| Road vehicles. Specification of non-petroleum-base brake fluids for hydraulic systems | |
| Road vehicles. Symbols for controls, indicators and tell-tales | |
| Road vehicles. Vehicle dynamics test methods. Part 2: General conditions for heavy vehicles and buses. | |
| Road vehicles. Vehicle to grid communication interface. Part 1: General information and use-case definition | |
| RUBBER INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V -- PART 13: SINGLE AND MULTICORE FLEXIBLE CABLES, INSULATED AND SHEATHED WITH CROSSLINKED POLYMER AND HAVING LOW EMISSION... | |
| RUBBER INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V. PART 14: CORDS FOR APPLICATIONS REQUIRING HIGH FLEXIBILITY. | |
| RUBBER INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V. PART 3: HEAT RESISTANT SILICONE RUBBER INSULATED CABLES. | |
| RUBBER INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V. PART 4: CORDS AND FLEXIBLE CABLES. | |
| RUBBER INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V. PART 7: CABLES WITH INCREASED HEAT RESISTANCE FOR INTERNAL WIRING FOR A CONDUCTOR TEMPERATURE OF 110 ºC. | |
| RUBBER INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V. PART 8: POLYCHLOROPRENE OR EQUIVALENT SYNTETIC ELASTOMETER SHEATHEDCABLE FOR DECORATIVE CHAINS. | |
| RUBBER INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V. PART 9: SINGLE CORE NON-SHEATHED CABLES FOR FIXED WIRING HAVING LOWEMISSION OF SMOKE AND CORROSIVE GASES. | |
| RUBBER INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750V. PART 10: EPR INSULATED AND POLYURETHANE SHEATHED FLEXIBLE CABLES. | |
| RUBBER INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750V. PART 11: EVA CORDS AND FLEXIBLE CABLES. | |
| RUBBER INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750V. PART 12: HEAT RESISTANT EPR CORDS AND FLEXIBLE CABLES. | |
| RUBBER INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750V. PART 6: ARC WELDING CABLES. | |
| RUBBER INSULATED CABLES OF RATED VOLTGS UP TO AND INCLUDING 450/750 V. PART 1: GENERAL REQUIREMENTS. | |
| Rubber, raw natural and raw synthetic. Sampling and further preparative procedures | |
| Rubber, vulcanized or thermoplastic. Determination of tear strength. Part 2: Small (Delft) test pieces | |
| Rubber, vulcanized or thermoplastics. Determination of tear strength. Part 1. Trouser, angle and crescen test pieces | |
| Rubber. Identification. Infrared spectrometric methods | |
| SAFETY DATA SHEET FOR CHEMICAL PRODUCTS. PART 1: CONTENT AND ORDER OF SECTIONS | |
| Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 4: Location and arrangement of displays and control actuators | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-010: Conformity verification report for IEC 61010-2-010, Particular requirements for laboratory equipment for the heating of materials. | |
| Safety requirements for radio transmitting equipment - General requirements and terminology | |
| Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection | |
| Sampling procedures for inspection by attributes — Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection | |
| Sampling procedures for inspection by attributes — Part 4: Procedures for assessment of declared quality levels | |
| Sampling procedures for inspection by variables -- Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a... | |
| Semiconductor devices - Flexible and stretchable semiconductor devices - Part 1: Bending test method for conductive thin films on flexible substrates | |
| Semiconductor devices - Semiconductor devices for energy harvesting and generation - Part 1: Vibration based piezoelectric energy harvesting | |
| Semiconductor devices - Semiconductor devices for energy harvesting and generation - Part 2: Thermo power based thermoelectric energy harvesting | |
| Semiconductor devices - Semiconductor devices for energy harvesting and generation - Part 3: Vibration based electromagnetic energy harvesting | |
| Semiconductor devices - Semiconductor interface for human body communication - Part 2: Characterization of interfacing performances | |
| Semiconductor devices - Semiconductor interface for human body communication - Part 3: Functional type and its operational conditions | |
| Sensory analysis. General guidance for the design of test rooms. | |
| Service excellence — Implementation approach for ISO 23592 | |
| Service excellence. Principles and model for public service organizations. | |
| SINTERED METAL BUSHES. DETERMINATION OF RADIAL CRUSHING STRENGTH | |
| Size Weighted Respirable Fraction - SweRF and Size Weighted Respirable Fraction of Crystalline Silica - SWeRFcs | |
| Smart grid user interface - Part 3: Energy interoperation services | |
| Societal security - Video-surveillance - Export interoperability (ISO 22311:2012) | |
| Software engineering — Guidelines for the application of ISO 9001:2015 to computer software | |
| Soil quality - Biological methods - Chronic toxicity in higher plants (ISO 22030:2005) | |
| Soil quality - Biological methods - Determination of nitrogen mineralization and nitrification in soils and the influence of chemicals on these processes (ISO 14238:2012) | |
| Soil quality - Determination of carbonate content - Volumetric method (ISO 10693:1995) | |
| Soil quality - Determination of dry bulk density (ISO 11272:1998) | |
| Soil quality - Determination of particle density (ISO 11508:1998) | |
| Soil quality - Determination of pore water pressure - Tensiometer method (ISO 11276:1995) | |
| Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method (ISO 11461:2001) | |
| Soil quality - Determination of the effects of pollutants on soil flora - Part 1: Method for the measurement of inhibition of root growth (ISO 11269-1:2012) | |
| Soil quality - Determination of the effects of pollutants on soil flora - Part 2: Effects of contaminated soil on the emergence and early growth of higher plants (ISO 11269-2:2012)... | |
| Soil quality - Determination of the water-retention characteristic - Laboratory methods (ISO 11274:1998 + Cor 1:2009) | |
| Soil quality - Determination of unsaturated hydraulic conductivity and water-retention characteristic - Wind's evaporation method (ISO 11275:2004) | |
| Soil quality - Effects of pollutants on earthworms - Part 1: Determination of acute toxicity to Eisenia fetida/Eisenia andrei (ISO 11268-1:2012) | |
| Soil quality - Effects of pollutants on earthworms - Part 2: Determination of effects on reproduction of Eisenia fetida/Eisenia andrei (ISO 11268-2:2012) | |
| Soil quality - Effects of pollutants on earthworms - Part 3: Guidance on the determination of effects in field situations (ISO 11268-3:2014) | |
| Soil quality - Effects of pollutants on insect larvae (Oxythyrea funesta) - Determination of acute toxicity (ISO 20963:2005) | |
| Soil quality - Field soil description (ISO 25177:2008) | |
| Soil quality - Guidance on leaching procedures for subsequent chemical and ecotoxicological testing of soils and soil materials (ISO 18772:2008) | |
| Soil quality - Guidance on the determination of background values (ISO 19258:2005) | |
| Soil quality - Guidance on the selection and application of screening methods (ISO 12404:2011) | |
| Soil quality - Laboratory methods for determination of microbial soil respiration (ISO 16072:2002) | |
| Soil quality - Measurement of the stability of soil aggregates subjected to the action of water (ISO 10930:2012) | |
| Soil quality - Method to directly extract DNA from soil samples (ISO 11063:2012) | |
| Soil quality - Requirements and guidance for the selection and application of methods for the assessment of bioavailability of contaminants in soil and soil materials (ISO 17402:2008) | |
| Soil quality - Sampling of soil invertebrates - Part 2: Sampling and extraction of micro-arthropods (Collembola and Acarina) (ISO 23611-2:2006) | |
| Soil quality - Sampling of soil invertebrates - Part 3: Sampling and soil extraction of enchytraeids (ISO 23611-3:2007) | |
| Soil quality - Sampling of soil invertebrates - Part 4: Sampling, extraction and identification of soil-inhabiting nematodes (ISO 23611-4:2007) | |
| Soil quality - Sampling of soil invertebrates - Part 6: Guidance for the design of sampling programmes with soil invertebrates (ISO 23611-6:2012) | |
| Soil quality - Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument (ISO 13196:2013) | |
| Soil quality -- Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography. | |
| Soil quality -- Determination of polycyclic aromatic hydrocarbons (PAH) -- Gas chromatographic method with mass spectrometric detection (GC-MS) | |
| Soil quality -- Sampling -- Part 3: Guidance on safety | |
| Soil quality. Determination of particle size distribution in mineral soil material. Method by sieving and sedimentation. | |
| Space data and information transfer systems — Audit and certification of trustworthy digital repositories | |
| Space Data System Practices — Reference model for an open archival information system (OAIS) | |
| SPACE ENGINEERING. POLICY AND PRINCIPLES | |
| SPACE ENGINEERING. SOFTWARE | |
| SPACE ENGINEERING. VERIFICATION | |
| SPACE PRODUCT ASSURANCE. POLICY AND PRINCIPLES | |
| SPACE PROJECT ASSURANCE. MATERIALS, MECHANICAL PARTS AND PROCESSES | |
| SPACE PROJECT ASSURANCE. QUALITY ASSURANCE | |
| SPACE PROJECT MANAGEMENT. CONFIGURATION MANAGEMENT | |
| SPACE PROJECT MANAGEMENT. COST AND SCHEDULE MANAGEMENT | |
| SPACE PROJECT MANAGEMENT. INFORMATION/DOCUMENT ATION MANAGEMENT. | |
| SPACE PROJECT MANAGEMENT. POLICY AND PRINCIPLES | |
| SPACE PROJECT MANAGEMENT. PROJECT BREAKDOWN STRUCTURES | |
| SPACE PROJECT MANAGEMENT. PROJECT ORGANIZATION | |
| SPACE PROJECT MANAGEMENT. PROJECT PHASING AND PLANNING | |
| SPACE SYSTEMS. GLOSSARY OF TERMS | |
| Spices and condiments. Preparation of ground sample for analysis. | |
| Springs - Vocabulary (ISO 26909:2009) | |
| STANDARD ATMOSPHERES FOR CONDITIONING AND/OR TESTING. SPECIFICATIONS | |
| Station Service Voltage Transformers (SSVT) | |
| Stationary source emissions. Manual determination of mass concentration of particulate matter | |
| Statistical interpretation of data -- Tests and confidence intervals relating to proportions | |
| Statistical methods in process management -- Capability and performance -- Part 4: Process capability estimates and performance measures | |
| Steel - Micrographic determination of the apparent grain size (ISO/FDIS 643:2015) | |
| Steel cord conveyor belts - Longitudinal traction test - Part 1: Measurement of elongation (ISO 7622-1:2013) | |
| Steel for the reinforcement of concrete - Weldable reinforcing steel - General | |
| STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - PART 2: TECHNICAL DELIVERY CONDITIONS FOR CLASS A. | |
| STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - PART 3: TECHNICAL DELIVERY CONDITIONS FOR CLASS B. | |
| STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - PART 4: TECHNICAL DELIVERY CONDITIONS FOR CLASS C. | |
| STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - PART 5: TECHNICAL DELIVERY CONDITIONS FOR WELDED FABRIC. | |
| STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - PART 6: TECHNICAL DELIVERY CONDITIONS FOR LATTICE GIRDERS. | |
| STEEL. CONVERSION OF ELONGATION VALUES. PART 1: CARBON AND LOW ALLOY STEELS. | |
| STEEL. CONVERSION OF ELONGATION VALUES. PART 2: AUSTENITIC STEELS. | |
| STEEL. HARDENABILITY TEST BY END QUENCHING (JOMINY TEST) | |
| STRUCTURAL STEEL EQUAL AND UNEQUAL LEG ANGLES. PART 1: DIMENSIONS. | |
| Surface cleaning appliances - Part 2: Dry vacuum cleaners for household and similar use - Methods for measuring the performance | |
| Sustainability in building construction -- Sustainability indicators -- Part 1: Framework for the development of indicators and a core set of indicators for buildings | |
| Systems engineering. System life cycle processes. (ISO/IEC 15288:2002) | |
| TECHNICAL DRAWINGS. SIMPLIFIED REPRESENTATION OF CENTRE HOLES | |
| Technical systems and aids for disabled or handicapped persons -- Wheelchair tiedown and occupant-restraint systems -- Part 1: Requirements and test methods for all systems | |
| Technical systems and aids for disabled or handicapped persons -- Wheelchair tiedown and occupant-restraint systems -- Part 2: Four-point strap-type tiedown systems | |
| Terminology work — Principles and methods. | |
| Terminology work and terminology science. Vocabulary. | |
| Test conditions for die sinking electro-discharge machines (die sinking EDM) -- Testing of the accuracy -- Part 1: Single-column machines (cross-slide table type and fixed-table type) | |
| Test conditions for die sinking electro-discharge machines (die sinking EDM) -- Testing of the accuracy -- Part 2: Double-column machines (slide-head type) | |
| Test conditions for machining centres — Part 2: Geometric tests for machines with vertical spindle (vertical Z-axis) | |
| Test conditions for machining centres — Part 7: Accuracy of finished test pieces | |
| Test conditions for machining centres -- Part 6: Accuracy of speeds and interpolations | |
| Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table -- Testing of the accuracy -- Part 1: Machines with table length of up to 1... | |
| Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV -- Part 2: Cables with impregnated paper insulation | |
| Testing hardened concrete - Part 11: Determination of the chloride resistance of concrete, unidirectional diffusion | |
| TESTS ON OIL-FILLED (FLUID FILLED), PAPER- AND PPL-INSULATED, METAL-SHEATHED CABLES AND ACCESORIIES FOR ALTERNATING VOLTAGES UP TO AND INCLUDING 400 KV (UM = 420 KV). | |
| Tests requirements for accessories for power cables with rated voltage from 3,6/6 (7,2) kV up to and including 20,8/36 (42) kV -- Part 2 : Cables with impregnated paper insulation... | |
| Textiles — Morphology of fibres and yarns — Vocabulary | |
| TEXTILES - TESTS FOR COLOUR FASTNESS - PART B06: COLOUR FASTNESS TO ARTIFICIAL LIGHT AT HIGH TEMPERATURES: XENON ARCFADING LAMP TEST | |
| Textiles. Man-made fibres. Generic names. | |
| Thermal solar systems and components - Custom built systems - Part 1: General requirements for solar water heaters and combisystems | |
| Thermal solar systems and components - Custom built systems - Part 2: Test methods for solar water heaters and combisystems | |
| Thermal solar systems and components - Custom built systems - Part 4: Performance test methods for solar combistores | |
| Thermal solar systems and components - Custom built systems - Part 5: Performance test methods for control equipment | |
| Thyristor valves for thyristor controlled series capacitors (TCSC) - Electrical testing | |
| Timber blanks and semi-finished profiles for non-structural uses - Part 2: Production control | |
| TOLERANCES IN BUILDING. TERMINOLOGY, PRINCIPLES, APPLICATION, TESTING | |
| Tourism and related services — Semantics applied to tourism destinations. | |
| Tourism and related services —Tourist information services — Requirements and recommendations | |
| Tyres (ply rating marked series) and rims for agricultural tractors and machines -- Part 1: Tyre designation and dimensions, and approved rim contours | |
| Visible light beacon system for multimedia applications | |
| Voltage sourced converter (VSC) valves for static synchronous compensator (STATCOM) - Electrical Testing | |
| Water quality — Vocabulary | |
| Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification (ISO/DIS 24373:2006) | |
| Wheelchairs -- Part 19: Wheeled mobility devices for use in motor vehicles | |
| Wireless Power Transfer - AirFuel Resonant Baseline System Specification (BSS) | |
| Wireless Power Transfer - Management - Part 1: Common Components | |
| Wireless power transfer - Management - Part 3: Multiple source control management |
| << Prev | Next >> |