AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for low voltage adjustable speed a.c. power drive systems | |
| Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional | |
| Adjustable speed electrical power drive systems - Part 7-1: Generic interface and use of profiles for power drive systems - Interface definition | |
| Adjustable speed electrical power drive systems - Part 7-201: Generic interface and use of profiles for power drive systems - Profile type 1 specification | |
| Adjustable speed electrical power drive systems - Part 7-202: Generic interface and use of profiles for power drive systems - Profile type 2 specification | |
| Adjustable speed electrical power drive systems - Part 7-203: Generic interface and use of profiles for power drive systems - Profile type 3 specification | |
| Adjustable speed electrical power drive systems - Part 7-204: Generic interface and use of profiles for power drive systems - Profile type 4 specification | |
| Adjustable speed electrical power drive systems - Part 7-301: Generic interface and use of profiles for power drive systems - Mapping of profile type 1 to network technologies | |
| Adjustable speed electrical power drive systems - Part 7-302: Generic interface and use of profiles for power drive systems - Mapping of profile type 2 to network technologies | |
| Adjustable speed electrical power drive systems - Part 7-303: Generic interface and use of profiles for power drive systems - Mapping of profile type 3 to network technologies | |
| Adjustable speed electrical power drive systems - Part 7-304: Generic interface and use of profiles for power drive systems - Mapping of profile type 4 to network technologies | |
| Adjustable speed electrical power drive systems - Part 9-1: Ecodesign for power drive systems, motor starters, power electronics and their driven applications - General requirements for setting energy efficiency standards... | |
| Adjustable speed electrical power drive systems - Part 9-2: Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Energy efficiency indicators for power drive systems... | |
| Aerospace series - Blind bolt, 100° flush head, high strength | |
| Aerospace series - Cap, protective, non-metallic for fitting ends = 3 000 PSI hydraulic systems | |
| Application integration at electric utilities - System interfaces for distribution management - Part 100: Implementation profiles | |
| Application integration at electric utilities - System interfaces for distribution management - Part 11: Common information model (CIM) extensions for distribution | |
| Application integration at electric utilities - System interfaces for distribution management - Part 1: Interface architecture and general recommendations | |
| Application integration at electric utilities - System interfaces for distribution management - Part 6: Interfaces for maintenance and construction | |
| Application integration at electric utilities - System interfaces for distribution management - Part 8: Interfaces for customer operations | |
| Application integration at electric utilities - System interfaces for distribution management - Part 9: Interface for meter reading and control | |
| Application integration at electric utilities - System interfaces for distribution management - Part 9: Interfaces for meter reading and control | |
| Audio, video and related equipment - Determination of power consumption - Part 4: Video recording equipment | |
| Audio, video and related equipment - Determination of power consumption - Part 5: Set top boxes (STB) | |
| Audio, video and related equipment - Determination of power consumption - Part 6: Audio equipment | |
| Audio, video, and related equipment - Determination of power consumption - Part 1: General | |
| Audio, video, and related equipment - Determination of power consumption - Part 2: Signals and media | |
| Audio, video, and related equipment - Determination of power consumption - Part 3: Television sets | |
| Automatic test systems for battery powered emergency escape lighting | |
| Batch control -- Part 4: Batch production records | |
| Calibration of Optical Time-Domain Reflectometers (OTDR) -- Part 1: OTDR for single-mode fibres | |
| Calibration of optical time-domain reflectometers (OTDR) -- Part 2: OTDR for multimode fibres | |
| Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical spectrum analyzers | |
| Calibration of wavelength/optical frequency measurement instruments - Part 2: Michelson interferometer single wavelength meters | |
| Characteristics of DAB receivers (TA1) | |
| Communication networks and systems for power utility automation - Part 10: Conformance testing | |
| Communication networks and systems for power utility automation - Part 3: General requirements | |
| Communication networks and systems for power utility automation - Part 4: System and project management | |
| Communication networks and systems for power utility automation - Part 6: Configuration description language for communication in electrical substations related to IEDs | |
| Communication networks and systems for power utility automation - Part 7-1: Basic communication structure - Principles and models | |
| Communication networks and systems for power utility automation - Part 7-410: Basic communication structure - Hydroelectric power plants - Communication for monitoring and control | |
| Communication networks and systems for power utility automation - Part 7-4: Basic communication structure - Compatible logical node classes and data classes | |
| Communication networks and systems for power utility automation - Part 9-2: Specific communication service mapping (SCSM) - Sampled values over ISO/IEC 8802-3 | |
| Communication networks and systems for power utility automation -- Part 7-2: Basic information and communication structure - Abstract communication service interface (ACSI) | |
| Communication networks and systems for power utility automation -- Part 7-3: Basic communication structure - Common data classes | |
| Communication networks and systems for power utility automation -- Part 8-1: Specific Communication Service Mapping (SCSM) - Mappings to MMS (ISO 9506-1 and ISO 9506-2) and to ISO/IEC 8802-3 | |
| Components for low-voltage surge protective devices - Part 351: Performance requirements and test methods for telecommunications and signalling network surge isolation transformers (SIT) | |
| Components for low-voltage surge protective devices -- Part 312: Preferred values and characteristics for gas discharge tubes | |
| Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 10: Non-linear PCM bitstreams according to the MPEG-4 Audio Lossless Coding (ALS) format | |
| Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 11: MPEG-4 AAC and its extensions in LATM/LOAS | |
| Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 -- Part 12: Non-linear PCM bitstreams according to the DRA formats | |
| Electric components - Reliability - Reference conditions for failure rates and stress models for conversion | |
| Electric vehicle conductive charging system - Part 21-1: Electric vehicle on-board charger EMC requirements for conductive connection to an AC/DC supply | |
| Electric vehicle wireless power transfer systems (WPT) - Part 1: General requirements | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment... | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring... | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote... | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to... | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for devices with field bus interfaces... | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) -... | |
| Electrical insulating materials and systems - A.C. voltage endurance evaluation | |
| Electrical insulating materials and systems - General method of evaluation of electrical endurance under repetitive voltage impulses | |
| Electrical insulation systems - Procedures for thermal evaluation - Part 31: Applications with a designed life of 5 000 h or less | |
| Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 1: Wire-wound winding EIS | |
| Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 2: Form-wound EIS | |
| Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part... | |
| Electricity metering data exchange - The DLMS/COSEM suite - Part 3-1: Use of local area networks on twisted pair with carrier signalling | |
| Electricity metering data exchange - The DLMS/COSEM suite - Part 4-7: DLMS/COSEM transport layer for IP networks | |
| Electricity metering data exchange - The DLMS/COSEM suite - Part 5-3: DLMS/COSEM application layer | |
| Electricity metering data exchange - The DLMS/COSEM suite - Part 6-1: Object Identification System (OBIS) | |
| Electricity metering data exchange - The DLMS/COSEM suite - Part 6-2: COSEM interface classes | |
| Electricity metering data exchange - The DLMS/COSEM suite - Part 7-3: Wired and wireless M-Bus communication profiles for local and neighbourhood networks | |
| Electricity metering data exchange - The dlms/cosem suite - Part 7-5: Local data transmission profiles for Local Networks (LN) | |
| Electricity metering data exchange - The DLMS/COSEM suite - Part 7-6: The 3-layer, connection-oriented HDLC based communication profile | |
| Electricity metering data exchange - The DLMS/COSEM suite - Part 8-3: Communication profile for PLC S-FSK neighbourhood networks | |
| Electricity metering data exchange - The DLMS/COSEM suite - Part 8-6: High speed PLC ISO/IEC 12139-1 profile for neighbourhood networks | |
| Electricity metering data exchange - The DLMS/COSEM suite - Part 9-7: Communication profile for TCP-UDP/IP networks | |
| Electroacoustics - Measurement of real-ear acoustical performance characteristics of hearing aids | |
| Electroacoustics - Octave-band and fractional-octave-ba nd filters - Part 1: Specifications | |
| Electroacoustics - Octave-band and fractional-octave-ba nd filters - Part 2: Pattern-evaluation tests | |
| Electroacoustics - Octave-band and fractional-octave-ba nd filters - Part 3: Periodic tests | |
| Electromechanical elementary relays - Part 1: General and safety requirements | |
| Electromechanical elementary relays - Part 2-1: Reliability - Procedure for the verification of B10 values | |
| Electromechanical elementary relays - Part 2: Reliability | |
| Electromechanical elementary relays - Part 3: Relays with forcibly guided (mechanically linked) contacts | |
| Electromechanical telecom elementary relays of assessed quality - Part 1: Generic specification and blank detail specification | |
| Electronic railway equipment - Train communication network (TCN) - Part 1: General architecture | |
| Electronic railway equipment - Train communication network (TCN) - Part 2-1: Wire Train Bus (WTB) | |
| Electronic railway equipment - Train communication network (TCN) - Part 2-2: Wire Train Bus conformance testing | |
| Electronic railway equipment - Train communication network (TCN) - Part 2-3: TCN communication profile | |
| Electronic railway equipment - Train communication network (TCN) - Part 2-5: Ethernet train backbone | |
| Electronic railway equipment - Train communication network (TCN) - Part 3-1: Multifunction Vehicle Bus (MVB) | |
| Electronic railway equipment - Train communication network (TCN) - Part 3-2: MVB (Multifunction Vehicle Bus) conformance testing | |
| Electronic railway equipment - Train communication network (TCN) - Part 3-3: CANopen Consist Network (CCN) | |
| Electronic railway equipment - Train communication network (TCN) - Part 3-4: Ethernet Consist Network (ECN) | |
| Electronics assembly technology - Part 3: Selection guidance of environmental and endurance test methods for solder joints | |
| Electronics assembly technology - Part 4: Endurance test methods for solder joint of area array type package surface mount devices | |
| Electrostatics - Part 2-1: Measurement methods - Ability of materials and products to dissipate static electric charge | |
| Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation | |
| Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC) | |
| Electrostatics - Part 4-6: Standard test methods for specific applications - Wrist straps | |
| Electrostatics - Part 4-7: Standard test methods for specific applications - Ionization | |
| Electrostatics - Part 4-8: Standard test methods for specific applications - Electrostatic discharge shielding - Bags | |
| Electrostatics - Part 4-9: Standard test methods for specific applications - Garments | |
| Electrostatics - Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements | |
| Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements classification for packaging intended for electrostatic discharge sensitive devices | |
| Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements classifications for packaging intended for electrostatic discharge sensitive devices | |
| Energy management system application program interface (EMS-API) - Part 301: Common information model (CIM) base | |
| Energy management system application program interface (EMS-API) - Part 452: CIM model exchange specification | |
| Energy management system application program interface (EMS-API) - Part 452: CIM Static transmission network model profiles | |
| Energy management system application program interface (EMS-API) - Part 453: Diagram layout profile | |
| Energy management system application program interface (EMS-API) - Part 456: Solved power system state profiles | |
| Energy Management System Application Program Interface (EMS-API) - Part 552: CIMXML Model Exchange Format | |
| Energy management system application program interface (EMS-API) - Part 555: CIM based efficient model exchange format (CIM/E) | |
| Enterprise system integration - Part 5: Business to manufacturing transactions | |
| Enterprise-control system integration - Part 1: Models and terminology | |
| Enterprise-control system integration - Part 2: Objects and attributes for enterprise-control system integration | |
| Enterprise-control system integration - Part 3: Activity models of manufacturing operations management | |
| Enterprise-control system integration - Part 4: Object model attributes for manufacturing operations management integration | |
| Fiber optic active components and devices - Package and interface standards - Part 17: Transmitter and receiver components with dual coaxial RF connectors | |
| Fibre optic active components and devices - Basic test and measurement procedures -- Part 4: Relative intensity noise using a time-domain optical detection system | |
| Fibre optic active components and devices - Package and interface standards - Part 15: Discrete vertical cavity surface emitting laser packages | |
| Fibre optic active components and devices - Package and interface standards - Part 18: 40-Gbit/s serial transmitter and receiver components for use with the LC connector interface | |
| Fibre optic active components and devices - Package and interface standards -- Part 11: 14-pin active device modules | |
| Fibre optic active components and devices - Package and interface standards -- Part 16: Transmitter and receiver components for use with LC connector interface | |
| Fibre optic active components and devices - Package and interface standards -- Part 2: SFF 10-pin transceivers | |
| Fibre optic active components and devices - Package and interface standards -- Part 3: SFF 20-pin transceivers | |
| Fibre optic active components and devices - Performance standards - Part 1: General and guidance | |
| Fibre optic active components and devices - Performance standards - Part 2: 850 nm discrete vertical cavity surface emitting laser devices | |
| Fibre optic active components and devices - Performance standards - Part 3: Modulator-integrated laser diode transmitters for 2,5-Gbit/s to 40-Gbit/s fibre optic transmission systems | |
| Fibre optic active components and devices - Performance standards - Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application | |
| Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs | |
| Fibre optic active components and devices - Performance standards - Part 7: 1 310 nm discrete vertical cavity surface emitting laser devices | |
| Fibre optic active components and devices - Performance standards - Part 8: Seeded reflective semiconductor optical amplifier devices | |
| Fibre optic active components and devices - Performance standards - Part 9: Seeded reflective semiconductor optical amplifier transceivers | |
| Fibre optic active components and devices - Test and measurement procedures - Part 3: Optical power variation induced by mechanical disturbance in optical receptacles and transceiver interfaces | |
| Fibre optic active components and devices - Test and measurement procedures - Part 5: Wavelength channel tuning time of tuneable transmitters | |
| Fibre optic active components and devices - Test and measurement procedures -- Part 2: ATM-PON transceivers | |
| Fibre optic communication subsystem basic test procedures - Part 1-1: Test procedures for general communication subsystems - Transmitter output optical power measurement for single-mode optical fibre cable | |
| Fibre optic communication subsystem basic test procedures - Part 2-3: Test procedures for digital systems - Jitter and wander measurements | |
| Fibre optic communication subsystem test procedures - Part 1-3: General communication subsystems - Central wavelength and spectral width measurement | |
| Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems - Light source encircled flux measurement method | |
| Fibre optic communication subsystem test procedures - Part 2-12: Digital systems - Measuring eye diagrams and Q-factor using a software triggering technique for transmission signal quality assessment | |
| Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement | |
| Fibre optic communication subsystem test procedures - Part 4-1: Installed cable plant - Multimode attenuation measurement | |
| Fibre optic communication subsystem test procedures -- Part 2-1: Digital systems - Receiver sensitivity and overload measurement | |
| Fibre optic communication subsystem test procedures -- Part 2-9: Digital systems - Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems | |
| Fibre optic interconnect devices and passive components - Basic test and measurement procedures - Part 3-48: Examinations and measurements - Spring compression force of the coupling sleeve for rectangular ferrule... | |
| Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1-1: Blank detail specification | |
| Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1: Generic specification | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-10: Tests - Crush resistance | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - High optical power | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-15: Tests - Torque strength of coupling mechanism | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state) | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-28: Tests - Corrosive atmosphere (sulphur dioxide) | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-33: Tests - Assembly and disassembly of fibre optic mechanical splices, fibre management systems and... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-35: Tests - Cable nutation | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-37: Tests - Cable bending for fibre optic closures | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-43: Tests - Screen testing of return loss of single-mode PC optical fibre connectors | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-52: Tests - Bending test for cords | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-14: Examinations and measurements - Error and repeatability of the attenuation settings of a variable... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements - Switching time | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-25: Examinations and measurements - Concentricity of non-angled ferrules and non-angled ferrules with fibre installed... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-25: Examinations and measurements - Concentricity of the non-angled ferrules and non-angled ferrules with fibre... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: Examinations and measurements - Spectral transfer characteristics of DWDM devices | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-33: Examinations and measurements - Withdrawal force from a resilient alignment sleeve using gauge pins... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Visual inspection of fibre optic connectors and fibre-stub transceivers | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-38:Examinations and measurements - Group delay, chromatic dispersion and phase ripple | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-44: Examinations and measurements - Fibre optic transceiver receptacle endface visual and automated inspection | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-45: Examinations and measurements - Attenuation of random mated multi-fibre connectors | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-46: Measurement - Bore diameter for guide pin in MT ferrules | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-47: Examinations and measurements - End face geometry of PC/APC spherically polished ferrules using interferometry... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-49: Examinations and measurements - Guide pin retention force for rectangular ferrule multi-fibre connectors | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-50: Examinations and measurements - Crosstalk for optical spatial switches | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-51: Examinations and measurements - Pin gauge withdrawal force for rectangular ferrule multi-fibre connectors | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-52: Examinations and measurements - Guide hole and alignment pin deformation constant, CD for 8... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-53: Examinations and measurements - Encircled angular flux (EAF) measurement method based on two-dimensional far... | |
| Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 2-4: Connection parameters of non-dispersion shifted single-mode physically contacting fibres - Non-angled for reference connection applications | |
| Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 2-5: Connection parameters of non-dispersion shifted single-mode physically contacting fibres - Angled for reference connection applications | |
| Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-31: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Angled polyphenylene sulphide rectangular ferrules... | |
| Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-32: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Angled thermoset epoxy rectangular ferrules... | |
| Fibre optic interconnecting devices and passive components - Fibre optic circulators - Generic specification | |
| Fibre optic interconnecting devices and passive components - Fibre optic closures - Part 1: Generic specification | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 1: General and guidance | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 20-100: Interface standard for LC connectors with protective housings related to IEC 61076-3-106 | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 20: Type LC connector family | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 26: Type SF connector family | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 27: Type M12-FO connector family | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 28: Type LF3 connector family | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 29: Type BLINK connector series | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 30: Type CLIK connector series | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 31: Type N-FO connector family | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 32: Type DiaLink connector family | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 34: Type URM connector family | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4-100: Type SC connector family - Simplified receptacle SC-PC connector interfaces | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4: Type SC connector family | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 6-100: Type MU connector family - Simplified receptacle MU-PC connector interfaces | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 6: Type MU connector family | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7-1: Type MPO connector family - One fibre row | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces -- Part 24: Type SC-RJ connector family | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 1: Optical interfaces for single-mode non-dispersion shifted fibres - General and guidance | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 2-1: Connection of non-dispersion shifted single mode non-angled physically contacting fibres | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 2-2: Connection of non-dispersion shifted single-mode angled physically contacting (APC) fibres | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-1: Connectors with 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrule, non-angled single-mode... | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-2: Connectors with 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrule, angled single-mode... | |
| Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1-1: Blank detail specification | |
| Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1: Generic specification | |
| Fibre optic interconnecting devices and passive components - Fibre optic fan-outs -- Part 1: Generic specification | |
| Fibre optic interconnecting devices and passive components - Fibre optic filters - Generic specification | |
| Fibre optic interconnecting devices and passive components - Fibre optic passive chromatic dispersion compensators - Part 1: Generic specification | |
| Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 021-3: Single-mode fibre optic connectors for category U - Uncontrolled environment | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 022-2: Fibre optic connectors terminated on multimode fibre for category C - Controlled environment | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 031-2: Non-connectorized single-mode 1×N and 2×N non-wavelength-selec tive branching devices for Category C - Controlled environment | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 031-3: Non-connectorized single-mode 1×N and 2×N non-wavelength-selec tive branching devices for Category U - Uncontrolled environment | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 031-6: Non-connectorized single-mode 1xN and 2xN non-wavelengthselect ive branching devices for Category O - Uncontrolled environment | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 041-2: Non-connectorized single-mode OTDR reflecting device for category C - Controlled environment | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 042-2: Plug-pigtail-style and plug-receptacle-styl e OTDR reflecting devices for category C - Controlled environments | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 051-3: Single-mode fibre, plug style fixed attenuators for category U - Uncontrolled environment | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 052-3: Single-mode fibre non-connectorized fixed attenuator - Category U in uncontrolled environment | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 052-6: Single-mode fibre non-connectorized fixed attenuator - Category O in outside plant environment | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 053-2: Non-connectorized single-mode fibre, electrically controlled, variable optical attenuator for category C - Controlled environments | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 056-2: Single mode fibre pigtailed style optical fuse for category C - Controlled environment | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 057-2: Single mode fibre plug-receptacle style optical fuse for category C - Controlled environment | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 058-2: Single mode fibre pigtailed style optical power limiter for category C - Controlled environment | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 059-2: Single-mode fibre plug-receptacle style optical limiter for category C - Controlled environment | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 061-2: Non-connectorized single-mode fibre optic pigtailed isolators for category C - Controlled environment | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 071-2: Non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial switches for category C -... | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 081-2: Non-connectorized single-mode fibre optic middle-scale 1 x N DWDM devices for category C - Controlled environments | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 087-2: Non-connectorized single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category C - Controlled... | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 087-6: Non-connectorised single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category O - Uncontrolled... | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 089-2: Non-connectorized single-mode bidirectional OTDR monitoring WWDM devices for category C - Controlled environment | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 091-2: Non-connectorized single-mode fibre optic pigtailed circulators for category C - Controlled environment | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 1-3: General and guidance for single-mode fibre optic connector and cable assembly for industrial environment, Category I | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 111-7: Sealed closures for category A - Aerial | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 111-8: Sealed closures for category G - Ground | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 111-9: Sealed closures for category S - Subterranean | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 121-2: Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category C - Controlled environment... | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 131-3: Single-mode mechanical fibre splice for category U - Uncontrolled environment | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 143-2: Optical passive VIPA-based dispersion compensator of single-mode fibre transmission for category C - Controlled environment | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 381-2: Cyclic arrayed waveguide grating - Category C (controlled environment) | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 381-6: Cyclic arrayed waveguide grating - Category O (uncontrolled environment) | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 382-2: Non-connectorized single-mode bidirectional G-PON-NGA WWDM devices for category C - Controlled environment | |
| Fibre optic interconnecting devices and passive components - Performance standard -- Part 086-6: Non-connectorized single-mode bidirectional 1 490 / 1 550 nm downstream and 1 310 nm upstream WWDM devices... | |
| Fibre optic interconnecting devices and passive components - Performance standard -- Part 121-3: Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category U - Uncontrolled environment... | |
| Fibre optic interconnecting devices and passive components - Performance standard -- Part 141-2: Fibre optic passive chromatic dispersion compensator using single-mode dispersion compensating fibre for category C - Controlled environments... | |
| Fibre optic interconnecting devices and passive components - Performance standards - Part 121-2: Simplex and duplex cords with singlemode fibre and cylindrical ferrule connectors for category C - Controlled environment... | |
| Fibre optic interconnecting devices and passive components -Performance standard - Part 088-2: Non-connectorized single-mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C - Controlled... | |
| Fibre optic interconnecting devices and passive components performance standard - Part 031-3: Non-connectorized single-mode 1xN and 2xN non-wavelength-selec tive branching devices (NWBD) for Category U - Uncontrolled environment | |
| Fibre optic interconnecting devices and passive components performance standard - Part 086-2: Non-connectorised single-mode bidirectional 1490 / 1550 nm downstream 1310 nm upstream WWDM devices for category C - Controlled... | |
| Fibre optic sensors – Part 1-1: Strain measurement – Strain sensors based on fibre Bragg gratings | |
| Fibre optic sensors - Part 1: Generic specification | |
| Fibre optic sensors - Part 2-2: Temperature measurement - Distributed sensing | |
| Fibre-optic communication subsystem test procedures - Part 4-2: Installed cable plant - Single-mode attenuation and optical return loss measurement | |
| Fixed inductors for use in electronic and telecommunication equipment - Marking codes | |
| Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods | |
| Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems | |
| Fuel cell technologies - Part 3-400: Stationary fuel cell power systems - Small stationary fuel cell power system with combined heat and power output | |
| Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks | |
| Fuel cell technologies -- Part 3-3: Stationary fuel cell power systems - Installation | |
| Function Blocks (FB) for process control and Electronic Device Description Language (EDDL) - Part 3: EDDL syntax and semantics | |
| Function blocks (FB) for process control and Electronic Device Description Language (EDDL) - Part 4: EDD interpretation | |
| Function blocks (FB) for process control and electronic device description language (EDDL) - Part 5: EDDL Builtin library | |
| Function blocks - Part 1: Architecture | |
| Function blocks - Part 2: Software tool requirements | |
| Function blocks - Part 4: Rules for compliance profiles | |
| Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements | |
| Functional safety - Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application of IEC 61511-1 | |
| Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels | |
| Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 2-21: Cord and work area cord category 6 Blank detail specification... | |
| Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 2-23: Cord and work area cord category 7- Blank detail specification... | |
| Generic cabling systems - Specification for the testing of balanced communicationcabling in accordance with ISO/IEC 11801 - Part 2-24: Cord and work area cord category 7A Blank detail specification | |
| Grading capacitors for high-voltage alternating current circuit-breakers - Part 1: General | |
| High-voltage direct current (HVDC) installations - System tests | |
| High-voltage switchgear and controlgear - Part 112: Alternating current high-speed earthing switches for secondary arc extinction on transmission lines | |
| High-voltage switchgear and controlgear - Part 3: Digital interfaces based on IEC 61850 | |
| High-voltage switchgear and controlgear -- Part 208: Methods to quantify the steady state, power-frequency electromagnetic fields generated by HV switchgear assemblies and HV/LV prefabricated substations | |
| Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures - Part 2: Procedure to determine the specific absorption rate (SAR)... | |
| Hydraulic turbines, storage pumps and pump-turbines - Rehabilitation and performance improvement | |
| Inductive components - Reliability management | |
| Industrial communication networks - Installation of communication networks in industrial premises | |
| Industrial communication networks - Profiles - Part 1: Fieldbus profiles | |
| Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3 | |
| Industrial communication networks - Profiles - Part 3-2: Functional safety fieldbuses - Additional specifications for CPF 2 | |
| Industrial communication networks - Profiles - Part 3-3: Functional safety fieldbuses - Additional specifications for CPF 3 | |
| Industrial communication networks - Profiles - Part 3: Functional safety fieldbuses - General rules and profile definitions | |
| Industrial communication networks - Profiles - Part 5-1: Installation of fieldbuses - Installation profiles for CPF 1 | |
| Industrial communication networks - Profiles - Part 5-2: Installation of fieldbuses - Installation profiles for CPF 2 | |
| Industrial communication networks - Profiles - Part 5-3: Installation of fieldbuses - Installation profiles for CPF 3 | |
| Industrial communication networks - Profiles - Part 5-4: Installation of fieldbuses - Installation profiles for CPF 4 | |
| Industrial communication networks - Profiles - Part 5-6: Installation of fieldbuses - Installation profiles for CPF 6 | |
| Industrial communication networks - Profiles -- Part 5: Installation of fieldbuses | |
| Industrial- Process Measurement and Control - Data Structures and Elements in Process Equipment Catalogues - Part 12: Lists of properties (LOPs) for flow measuring equipment for electronic data exchange | |
| Industrial-process control - Safety of analyzer houses | |
| Industrial-process measurement and control - Data structures and elements in -process equipment catalogues - Part 11: Lists of properties (LOPs) of measuring equipment for electronic data exchange - Generic structures... | |
| Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 11: List of Properties (LOP) of measuring equipment for electronic data exchange - Generic structures... | |
| Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 13: Lists of properties (LOP) for Pressure Measuring Equipment for electronic data exchange | |
| Industrial-Process Measurement and Control - Data Structures and Elements in Process Equipment Catalogues - Part 14: Lists of properties (LOP) for temperature measuring equipment for electronic data exchange | |
| Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 15: Lists of properties (LOPs) for level measuring equipment for electronic data exchange | |
| Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 16: Lists of properties (LOPs) for density measuring equipment for electronic data exchange | |
| Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 21: List of Properties (LOP) of automated valves for electronic data exchange - Generic structures... | |
| Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 22: Lists of Properties (LOPs) of valve body assemblies for electronic data exchange | |
| Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 23: Lists of Properties (LOPs) of actuators for electronic data exchange | |
| Industrial-Process Measurement and Control - Data Structures and Elements in Process Equipment Catalogues - Part 24-1: Lists of Properties (LOP) of positioners for electronic data exchange | |
| Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-2: List of properties (LOPs) of valve/actuator accessories for electronic data exchange | |
| Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-3: Lists of properties (LOPs) of flow modification accessories for electronic data exchange | |
| Industrial-process measurement and control - Data structures and elements in process equipment catalogues -- Part 10: Lists of properties (LOPs) for industrial-process measurement and control for electronic data exchange -... | |
| Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Round laminated rolled... | |
| Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated moulded... | |
| Integrated circuits - EMC Evaluation of transceivers - Part 2: LIN transceivers | |
| Integrated circuits - Measurement of electromagnetic emissions - Part 8: Measurement of radiated emissions - IC stripline method | |
| Integrated circuits - Measurement of electromagnetic immunity - Part 1: General conditions and definitions | |
| Integrated circuits - Measurement of electromagnetic immunity - Part 8: Measurement of radiated immunity - IC stripline method | |
| Integrated circuits - Measurement of electromagnetic immunity -- Part 2: Measurement of radiated immunity - TEM cell and wideband TEM cell method | |
| Integrated circuits - Measurement of impulse immunity - Part 3: Non-synchronous transient injection method | |
| Liquid crystal display devices - Part 10-1: Environmental, endurance and mechanical test methods – Mechanical | |
| Liquid crystal display devices - Part 2-1: Passive matrix monochrome LCD modules - Blank detail specification | |
| Liquid crystal display devices - Part 2-2: Matrix colour LCD modules - Blank detail specification | |
| Liquid crystal display devices - Part 4-1: Matrix colour LCD modules - Essential ratings and characteristics | |
| Liquid crystal display devices - Part 40-1: Mechanical testing of display cover glass for mobile devices - Guidelines | |
| Liquid crystal display devices - Part 4: Liquid crystal display modules and cells - Essential ratings and characteristics | |
| Liquid crystal display devices - Part 5-2: Environmental, endurance and mechanical test methods - Visual inspection of active matrix colour liquid crystal display modules | |
| Liquid crystal display devices - Part 6-1: Measuring methods for liquid crystal display modules - Transmissive type | |
| Liquid crystal display devices - Part 6-2: Measuring methods for liquid crystal display modules - Reflective type | |
| Liquid crystal display devices - Part 6-3: Measuring methods for liquid crystal display modules - Motion artifact measurement of active matrix liquid crystal display modules | |
| Low-voltage surge protective devices - Part 22: Surge protective devices connected to telecommunications and signalling networks - Selection and application principles | |
| Low-voltage surge protective devices - Part 32: Surge protective devices for specific use including d.c. - Selection and application principles for SPDs connected to photovoltaic installations | |
| Low-voltage surge protective devices -- Part 11: Surge protective devices connected to low-voltage power distribution systems - Performance requirements and testing methods | |
| Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet | |
| Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 7: CompoNet | |
| Low-voltage switchgear and controlgear - Device profiles for networked industrial devices - Part 2: Root device profiles for starters and similar equipment | |
| Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicles charging stations | |
| Maritime navigation and radiocommunication equipment and systems - Automatic Identification Systems (AIS) - Part 2: Class A shipborne equipment of the automatic identification system (AIS) - Operational and performance requirements,... | |
| Maritime navigation and radiocommunication equipment and systems - Integrated navigation systems - Part 2: Modular structure for INS - Operational and performance requirements, methods of testing and required test results... | |
| Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Part 1: Performance requirements, methods of testing and required test results | |
| Maritime navigation and radiocommunication equipment and systems - Track control systems - Operational and performance requirements, methods of testing and required test results | |
| Materials for printed boards and other interconnecting structures - Part 2-27: Reinforced base materials clad and unclad - Bismaleimide/triazin e modified with non-halogenated epoxide woven glass laminate sheets of defined... | |
| Materials for printed boards and other interconnecting structures - Part 2-30: Reinforced base materials clad and unclad - Non-halogenated epoxide modified cyanate ester woven glass laminate of defined flammability (vertical... | |
| Materials for printed boards and other interconnecting structures - Part 2-39: Reinforced base materials clad and unclad - High performance epoxide and non-epoxide, woven E-glass laminate sheets of defined flammability... | |
| Materials for printed boards and other interconnecting structures - Part 2-40: Reinforced base materials clad and unclad - High performance, non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical... | |
| Materials for printed boards and other interconnecting structures - Part 2-43: Reinforced base materials clad and unclad - Non-halogenated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical... | |
| Materials for printed boards and other interconnecting structures - Part 2-44: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of defined flammability (vertical burning... | |
| Materials for printed boards and other interconnecting structures - Part 4-18: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - High performance epoxide woven E-glass... | |
| Materials for printed boards and other interconnecting structures - Part 4-19: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Hich performance non-halogenated epoxide woven... | |
| Materials for printed boards and other interconnecting structures -- Part 2-41: Reinforced base materials clad and unclad - Brominated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical... | |
| Materials for printed boards and other interconnecting structures -- Part 2-42: Reinforced base materials clad and unclad - Brominated epoxide non-woven / woven E-glass reinforced laminate sheets of defined flammability... | |
| Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Part 1: Devices used next to... | |
| Mechanical structures for electronic equipment - Outdoor enclosures - Part 1: Design guidelines | |
| Mechanical structures for electronic equipment - Outdoor enclosures - Part 2: Coordination dimensions | |
| Mechanical structures for electronic equipment - Outdoor enclosures - Part 3: Environmental requirements, tests and safety aspects | |
| Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 2: Seismic tests for cabinets and racks | |
| Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 3: Electromagnetic shielding performance tests for cabinets and subracks | |
| Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 5: Seismic tests for chassis, subracks and plug-in units | |
| Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis... | |
| Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 4: Combination of performance levels for modular cabinets | |
| Medical electrical equipment - Characteristics of digital x-ray imaging devices - Part 1-1: Determination of the detective quantum efficiency - Detectors used in radiographic imaging | |
| Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging | |
| Medical electrical equipment - Radiation dose documentation - Part 1: Radiation dose structured reports for radiography and radioscopy | |
| Metallic communication cable test methods - Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring of transfer impedance ZT and screening attenuation as or coupling attenuation ac of connectors... | |
| Methods of measurement for the power consumption of audio, video and related equipment | |
| Mineral insulated metal-sheathed thermocouple cables and thermocouples | |
| Multimedia systems and equipment - Colour measurement and management - Part 12-2: Simple metadata format for identification of colour gamut | |
| Optical amplifiers - Part 1: Generic specification | |
| Optical amplifiers - Part 2: Digital applications - Performance specification template | |
| Optical amplifiers - Part 2: Single channel applications - Performance specification template | |
| Optical amplifiers - Part 4: Multichannel applications - Performance specification template | |
| Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method | |
| Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method | |
| Optical amplifiers - Test methods - Part 10-5: Multichannel parameters - Distributed Raman amplifier gain and noise figure | |
| Optical amplifiers - Test methods - Part 1: Power and gain parameters | |
| Optical amplifiers - Test methods - Part 3-3: Noise figure parameters - Signal power to total ASE power ratio | |
| Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method | |
| Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method | |
| Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control | |
| Overhead lines - Requirements for greases for aluminium, aluminium alloy and steel bare conductors | |
| Piezoelectric devices - Preparation of outline drawings of surface-mounted devices (SMD) for frequency control and selection - General rules | |
| Plasma display panels - Part 2-1: Measuring methods - Optical and optoelectrical | |
| Plasma display panels - Part 2-4: Measuring methods - Visual quality: Image artifacts | |
| Plasma display panels - Part 2-5: Measuring methods - Acoustic noise | |
| Plasma Display Panels -- Part 4-2: Panel strength measuring methods | |
| Preparation of object lists, including parts lists | |
| Radionuclide imaging devices - Characteristics and conditions - Part 2: Gamma cameras for planar, wholebody, and SPECT imaging | |
| Radionuclide imaging devices - Characteristics and test conditions - Part 1: Positron emission tomographs | |
| Radiotherapy equipment - Coordinates, movements and scales | |
| Railway applications - Rolling stock equipment - Capacitors for power electronics - Part 2: Aluminium electrolytic capacitors with non solid electrolyte | |
| Railway applications - Rolling stock equipment - Capacitors for power electronics - Part 3: Electric double-layer capacitors | |
| Railway applications - Rolling stock equipment - Capacitors for power electronics -- Part 1: Paper/plastic film capacitors | |
| Reed switches - Part 1-1: Generic specification - Quality assessment | |
| Reed switches - Part 1: Generic specification | |
| Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation | |
| Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements | |
| Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) | |
| Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems | |
| Safety of primary and secondary lithium cells and batteries during transport | |
| Secondary batteries (except lithium) for the propulsion of electric road vehicles - Part 4: Safety requirements of nickel-metal hydride cells and modules | |
| Secondary cells and batteries containing alkaline or other non acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 2: Nickel-metal hydride | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications -... | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications - Part 3: Prismatic and cylindrical lithium secondary cells, and batteries... | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 1: Nickel-cadmium | |
| Secondary cells and batteries for renewable energy storage - General requirements and methods of test - Part 2: On-grid applications | |
| Semiconductor devices - Micro-electromechani cal devices - Part 10: Micro-pillar compression test for MEMS materials | |
| Semiconductor devices - Micro-electromechani cal devices - Part 11: Test method for coefficients of linear thermal expansion of free-standing materials for micro-electromechani cal systems | |
| Semiconductor devices - Micro-electromechani cal devices - Part 12: Bending fatigue testing method of thin film materials using resonant vibration of MEMS structures | |
| Semiconductor devices - Micro-electromechani cal devices - Part 13: Bend- and shear- type test methods of measuring adhesive strength for MEMS structures | |
| Semiconductor devices - Micro-electromechani cal devices - Part 14: Forming limit measuring method of metallic film materials | |
| Semiconductor devices - Micro-electromechani cal devices - Part 15: Test method of bonding strength between PDMS and glass | |
| Semiconductor devices - Micro-electromechani cal devices - Part 16: Test methods for determining residual stresses of MEMS films – Wafer curvature and cantilever beam deflection methods | |
| Semiconductor devices - Micro-electromechani cal devices - Part 17: Bulge test method for measuring mechanical properties of thin films | |
| Semiconductor devices - Micro-electromechani cal devices - Part 18: Bend testing methods of thin film materials | |
| Semiconductor devices - Micro-electromechani cal devices - Part 19: Electronic compasses | |
| Semiconductor devices - Micro-electromechani cal devices - Part 1: Terms and definitions | |
| Semiconductor devices - Micro-electromechani cal devices - Part 20: Gyroscopes | |
| Semiconductor devices - Micro-electromechani cal devices - Part 21: Test method for Poisson's ratio of thin film MEMS materials | |
| Semiconductor devices - Micro-electromechani cal devices - Part 22: Electromechanical tensile test method for conductive thin films on flexible substrates | |
| Semiconductor devices - Micro-electromechani cal devices - Part 25: Silicon based MEMS fabrication technology - Measurement method of pull-press and shearing strength of micro bonding area | |
| Semiconductor devices - Micro-electromechani cal devices - Part 26: Description and measurement methods for micro trench and needle structures | |
| Semiconductor devices - Micro-electromechani cal devices - Part 27: Bond strength test for glass frit bonded structures using micro-chevron-tests (MCT) | |
| Semiconductor devices - Micro-electromechani cal devices - Part 28: Performance testing method of vibration-driven MEMS electret energy harvesting devices | |
| Semiconductor devices - Micro-electromechani cal devices - Part 5: RF MEMS switches | |
| Semiconductor devices - Micro-electromechani cal devices - Part 7: MEMS BAW filter and duplexer for radio frequency control and selection | |
| Semiconductor devices - Micro-electromechani cal devices - Part 8: Strip bending test method for tensile property measurement of thin films | |
| Semiconductor devices - Micro-electromechani cal devices - Part 9: Wafer to wafer bonding strength measurement for MEMS | |
| Semiconductor die products - Part 2: Exchange data formats | |
| Semiconductor die products -- Part 1: Procurement and use | |
| Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Specification template for essential ratings and characteristics | |
| Single crystal wafers for surface acoustic wave (SAW) device applications - Specifications and measuring methods | |
| Soft ferrite material classification | |
| Specification for the testing of balanced and coaxial information technology cabling - Part 1: Installed balanced cabling as specified in ISO/IEC 11801 and related standards | |
| Specification for the testing of balanced and coaxial information technology cabling -- Part 2: Cords as specified in ISO/IEC 11801 and related standards | |
| Specification of the radio data system (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 MHz to 108,0 MHz | |
| Standard data element types with associated classification scheme for electric components - Part 6: IEC Common Data Dictionary (IEC CDD) quality guidelines | |
| Structuring of technical information and documentation | |
| Superconductivity - Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors | |
| Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires | |
| Superconductivity - Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites | |
| Superconductivity - Part 15: Electronic characteristic measurements - Intrinsic surface impedance of superconductor films at microwave frequencies | |
| Superconductivity - Part 16: Electronic characteristic measurements - Power-dependent surface resistance of superconductors at microwave frequencies | |
| Superconductivity - Part 17: Electronic characteristic measurements - Local critical current density and its distribution in large-area superconducting films | |
| Superconductivity - Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors | |
| Superconductivity - Part 19: Mechanical properties measurement - Room temperature tensile test of reacted Nb3Sn composite superconductors | |
| Superconductivity - Part 21: Superconducting wires - Test methods for practical superconducting wires - General characteristics and guidance | |
| Superconductivity - Part 22-1: Superconducting electronic devices - Generic specification for sensors and detectors | |
| Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors | |
| Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors | |
| Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires | |
| Superconductivity - Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors | |
| Superconductivity -- Part 14: Superconducting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices | |
| Superconductivity -- Part 8: AC loss measurements - Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup... | |
| Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 1: Plastic moulded enclosure outlines | |
| Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 2: Ceramic enclosures | |
| Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 3: Metal enclosures | |
| Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 4: Hybrid enclosure outlines | |
| Surface mounting technology - Part 3: Standard method for the specification of components for Through Hole Reflow (THR) soldering | |
| Surface mounting technology - Part 4: Classification, packaging, labelling and handling of moisture sensitive devices | |
| Ultrasonics - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 0,5 MHz to 5 MHz | |
| Ultrasonics - Pulse-echo scanners -- Part 2: Measurement of maximum depth of penetration and local dynamic range | |
| Uninterruptible power systems (UPS) - Part 1: General and safety requirements for UPS | |
| Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements | |
| Uninterruptible power systems (UPS) - Part 4: Environmental aspects - Requirements and reporting | |
| Uninterruptible power systems (UPS) - Part 5-3: DC output UPS - Performance and test requirements | |
| Waveguide type dielectric resonators - Part 1-5: General information and test conditions - Measurement method of conductivity at interface between conductor layer and dielectric substrate at microwave frequency | |
| Wind energy generation systems - Part 25-4: Communications for monitoring and control of wind power plants - Mapping to communication profile | |
| Wind energy generation systems - Part 25-6: Communications for monitoring and control of wind power plants - Logical node classes and data classes for condition monitoring | |
| Wind turbines - Part 13: Measurement of mechanical loads | |
| Wind turbines - Part 25-2: Communications for monitoring and control of wind power plants - Information models | |
| Wind turbines - Part 25-3: Communications for monitoring and control of wind power plants - Information exchange models | |
| Wind turbines - Part 27-1: Electrical simulation models - Wind turbines |
| << Prev | Next >> |