AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| Accessibility and usability of the built environment - Technical performance criteria and specifications | |
| Acoustics - Determination of airborne sound power levels emitted by machinery using vibration measurement - Part 1: Survey method using a fixed radiation factor (ISO/TS 7849-1:2009) | |
| Acoustics - Determination of airborne sound power levels emitted by machinery using vibration measurement - Part 2: Engineering method including determination of the adequate radiation factor (ISO/TS 7849-2:2009) | |
| Acoustics - Determination of occupational noise exposure - Methodology (ISO 9612:2025) | |
| Adaptation to climate change - Guidelines on using climate data in infrastructure standards | |
| Adaptation to climate change - Requirements and guidance on adaptation planning for local governments and communities (ISO/TS 14092:2020) | |
| Additive manufacturing for aerospace - General principles - Part classifications for additive manufactured parts used in aviation (ISO/ASTM 52967:2024) | |
| Additive manufacturing of metals - Powder bed fusion (PBF) - In-situ coaxial photodiode monitoring for lack of fusion flaw detection in PBF-LB (ISO/ASTM DTR 52958:2026) | |
| Additive manufacturing of metals - Powder bed fusion - Classification of imperfections (ISO/ASTM 52948:2026) | |
| Additive Manufacturing of metals - Test artefacts - Compression validation specimens for lattice designs (ISO/ASTM 52959:2026) | |
| Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature under non-reactive environment - Determination of creep behaviour by the hot grip method | |
| AERONAUTICAL GROUND LIGHTING ELECTRICAL INSTALLATION. CONSTANT CURRENT REGULATOR: EQUIPMENT SPECIFICATIONS AND TESTS | |
| AERONAUTICAL GROUND LIGHTING ELECTRICAL INSTALLATION. FLASHING LIGHTS: EQUIPMENT SPECIFICATIONS AND TESTS. | |
| AERONAUTICAL GROUND LIGHTING ELECTRICAL INSTALLATION. ISOLATING TRANSFORMER: SPECIFICATIONS AND TESTS. | |
| AERONAUTICAL GROUND LIGHTING ELECTRICAL INSTALLATION. SIGNS: EQUIPMENTSPECIFICATI ONS AND TESTS. | |
| Air Traffic Management - Specification for software assurance levels | |
| ALARM SYSTEMS. INTRUSION SYSTEMS. PART 1: GENERAL REQUIREMENTS | |
| Alloyed steels - Determination of chromium content - Inductively coupled plasma optical emission spectrometric method | |
| Ambient air - Application of EN 16909 for the determination of elemental carbon (EC) and organic carbon (OC) in PM10 and PMcoarse | |
| Ambient air - Measurement of bioaerosols - Part 2: Planning and evaluation of plant-related plume measurements | |
| Ambient air - Report on nitro- and oxy-PAHs - Origin, toxicity, concentrations and measurement methods | |
| Animal and vegetable fats and oils - Separation of lipid classes by capillary gas chromatography (fingerprint method) (ISO/TS 22115:2021) | |
| ASSESSMENT AND REPRESENTATION TESTING OF HIGH VOLTAGE MACHINES. | |
| Automotive fuels - Diesel fuel - Cold operability testing and fuel performance correlation | |
| Automotive fuels - E20 petrol - Background on the parameters required, their respective limits and justification | |
| Automotive fuels - Paraffinic diesel fuel and blends with FAME - Background to the parameters required and their respective limits and determination | |
| BAC Control loop components - Quality and performance assessment - Part 1: General framework and procedure | |
| Backgrounds to the revision of EN 450-1:2005+A1:2007 - Fly ash for concrete | |
| Basic human body measurements for technological design - Part 2: Statistical summaries of body measurements from individual ISO populations (ISO/TR 7250-2:2010) | |
| Best practices for the creation/evaluation of fingerprint analysis in accordance with the ISO 28199 series (ISO/TR 11594:2022) | |
| Bio-based products - Examples of reporting on sustainability criteria | |
| Biodegradable plastics - Status of standardization and new prospects | |
| Biological durability of wood and wood-based products - Determination of the preventive effectiveness against sapstain, mould and other disfiguring micro-organisms on freshly sawn timber - Field test | |
| Bituminous binders - Determination of breaking behaviour and immediate adhesivity of cationic bituminous emulsions with 2/4 mm aggregate | |
| Bituminous mixtures - Test methods - Part 51: Surface shear strength test | |
| Bituminous mixtures - Test methods - Part 52: Conditioning to address oxidative ageing | |
| Bituminous mixtures - Test methods - Part 57: Workability test of mastic asphalt | |
| Building Management System - Part 2: Accompanying prEN 16947-1:2015 - Modules M10-12 | |
| Business TeleCommunications (BTC). Transmission characteristics of digital Private Branch eXchanges (PBXs) | |
| Cabin air quality on civil aircraft – Chemical compounds | |
| Cement - Guidelines for the application of EN 197-2: Assessment and verification of constancy of performance | |
| Cereals (wheat and barley) - Technical Report of the interlaboratory studies for the determination of moisture and protein in whole kernels by near infrared spectroscopy | |
| Cereals and cereal products - Sampling studies (ISO/TR 29263:2021) | |
| Characterization of waste - Analysis of eluates - Determination of Ammonium - N, AOX, conductivity, Hg, phenol index, TOC, CN easily liberatable, F | |
| Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Al, Ti and P by inductively coupled plasma optical emission spectrometry | |
| Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Si and Al by X-ray fluorescence spectrometry | |
| CHEMICAL ANALYSIS OF REFRACTORY PRODUCTS. PART 4: PRODUCTS CONTAINING SILICA AND/OR ALUMINA (ANALYSIS BY FLAME ATOMIC ABSORPTION SPECTROMETRY (FAAS) AND INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROGRAPHY (ICP) | |
| Child care articles - compiled interpretations of CEN/TC 252 standards | |
| Child care articles - General safety guidelines - Part 1: Safety philosophy and safety assessment | |
| Child care articles - General safety guidelines - Part 2: Chemical hazards | |
| Child care articles - General safety guidelines - Part 3: Mechanical hazards | |
| Child use and care articles - 2012 compiled interpretations of CEN/TC 252 standards | |
| Child use and care articles - General safety guidelines - Part 1: Safety philosophy and safety assessment | |
| Child use and care articles - General safety guidelines - Part 2: Chemical hazards | |
| Child use and care articles - General safety guidelines - Part 4: Thermal hazards | |
| Child use and care articles - General safety guidelines - Part 5: Product information | |
| Collection of rationales for EN 1176 - Requirements | |
| Communication system for meters - Accompanying TR to EN 13757-2,-3 and -7, Examples and supplementary information | |
| Concrete - A study of the characteristic leaching behaviour of hardened concrete for use in the natural environment | |
| CONCRETE. PERFORMANCE, PRODUCTION, PLACING AND COMPLIANCE CRITERIA. | |
| Conformity assessment - Guidance for drafting normative documents suitable for use for conformity assessment (ISO/IEC 17007:2026) | |
| Conformity assessment - Requirements for bodies certifying products, processes and services - Amendment 1 (ISO/IEC 17065:2012/DAM 1:2025) | |
| Conformity assessment - Requirements for bodies providing audit and certification of management systems and requirements for third-party certification auditing of management systems - Part 2: Requirements for third party certification... | |
| Construction Products - Assessment of release of dangerous substances - Content of regulated dangerous substances - Selection of analytical methods | |
| Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor air of ammonia from cellulose insulation at 90 % RH | |
| Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor air | |
| Construction Products - Assessment of release of dangerous substances - Use of harmonised horizontal assessment methods | |
| Construction products: Assessment of release of dangerous substances - Concept of horizontal testing procedures in support of requirements under the CPD | |
| Construction products: Assessment of release of dangerous substances - Guidance on the statistical assessment of declared values - Part 1: Principles and rules of application | |
| Construction products: Assessment of release of dangerous substances - Guidance on the statistical assessment of declared values - Part 2: Technical and statistical background | |
| Construction products: Assessment of release of dangerous substances - Pros and cons of methods for communicating the potential release of dangerous substances into soil, groundwater or surface water and indoor... | |
| Continuous handling equipment and systems - Safety requirements for equipment for mechanical handling of unit loads - Interpretations relating to EN 619:2022 | |
| Controls for heating systems - Part 6: Accompanying TR prEN 12098-1:2015 - Modules M3-5,6,7,8 | |
| Controls for heating systems - Part 7: Accompanying TR prEN 12098-3:2015 - Modules M3-5,6,7,8 | |
| Controls for heating systems - Part 8: Accompanying TR prEN 12098-5:2015 - Modules M3-5,6,7,8 | |
| Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2016) | |
| Copper and copper alloys - Compendium of compositions and products | |
| CORROSION OF ALUMINIUM ALLOYS. DETERMINATION OF RESISTANCE TO STRESS CORROSION CRACKING. | |
| Corrugated metal hose assemblies for pressure applications - Part 3: Design method | |
| Cycles - Components and assemblies used in bicycles - Innovative requirements and test methods | |
| Cycles - Composite material used in bicycles - Specific tests suitable for components manufactured from composite materials | |
| DENSE SHAPED REFRACTORY PRODUCTS - PART 11: DETERMINATION OF RESISTANCE TO THERMAL SHOCK | |
| Design and use of inserts for lifting and handling of precast concrete elements | |
| Determination of the film thickness of coatings using an ultrasonic gage (ISO/TS 19397:2015) | |
| Diesel blends and fuels - Cold filterability issues | |
| Digital Video Broadcasting (DVB). Specificacion for conveying ITU-R System B Teletext in DVB bitstreams. | |
| District heating and cooling systems - Supplementary information on usage of CEN/TC 107 documents | |
| Documents relevant to EN 301 549 (V1.1.1) "Accessibility requirements suitable for public procurement of ICT products and services in Europe" | |
| Ductile iron pipes, fittings and accessories - Sanitary characteristics and test methods | |
| Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Guidelines for Pipelines Installation | |
| Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Part 1: Wood held in the storage yard after treatment and wooden... | |
| Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Part 2: Wooden commodities exposed in Use Class 4 or 5 (in... | |
| Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Wooden commodities exposed in Use Class 3 (Not covered, not in contact... | |
| Durability of wood and wood-based products - Interpretation document for standards related to efficacy requirements and specifications of wood preservatives | |
| Durability of wood and wood-based products - Remedial treatment of wood against insects by injection | |
| e-Competence Framework (e-CF) - A common European Framework for ICT Professionals in all industry sectors - Part 2: User Guide | |
| ELASTOMERIC PARTS FOR AQUEOUS PARENTERAL PREPARATIONS (ISO 8871:1990 INCLUDING AMENDMENT 1:1995) | |
| Electromagnetic compatibility and Radio spectrum Matters (ERM). ElectroMagnetic Compatibility (EMC) for radiotelephone transmitters and receivers for the maritime mobile service operating in the VHF bands. | |
| Electromagnetic compatibility and Radio spectrum Matters (ERM). ElectroMagnetic Compatibility (EMC) standard for Terrestrial Trunked Radio (TETRA) and ancillary equipment. | |
| Electronic fee collection - Application interface definition for autonomous systems - Part 1: Charging (ISO/TS 17575-1:2010) | |
| Electronic fee collection - Application interface definition for autonomous systems - Part 2: Communication and connection to the lower layers (ISO/TS 17575-2:2010) | |
| Electronic fee collection - Charging performance - Part 1: Metrics (ISO/TS 17444-1:2017) | |
| Electronic fee collection - Charging performance - Part 2: Examination framework (ISO/TS 17444-2:2017) | |
| Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-1 - Part 2: Abstract test suite (ISO/TS 16407-2:2012) | |
| Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-2 - Part 1: Test suite structure and test purposes (ISO/TS 16401-1:2012) | |
| Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-2 - Part 2: Abstract test suite (ISO/TS 16401-2:2012) | |
| Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-3 - Part 2: Abstract test suite (ISO/TS 16410-2:2012) | |
| Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-4 - Part 1: Test suite structure and test purposes (ISO/TS 16403-1:2012) | |
| Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 13141 - Part 2: Abstract test suite (ISO/TS 13140-2:2012) | |
| Electronic fee collection - Guidelines for EFC applications based on in-vehicle ITS stations | |
| Electronic fee collection - Guidelines for security protection profiles (ISO/TS 17574:2017) | |
| Electronic fee collection - Interferences on CEN DSRC devices from radio local area network devices operating in the 5 GHz frequency range - Results of a test campaign | |
| Electronic fee collection - Requirements for pre-payment systems | |
| Electronic fee collection - Test procedures for user and fixed equipment - Part 2: Conformance test for the on-board unit application interface (ISO/TS 14907-2:2016) | |
| Electronic fee collection - Test procedures for user and fixed equipment - Part 2: Conformance test for the onboard unit application interface (ISO/TS 14907-2:2011) | |
| Electronic Fee Collection - Value added services based on EFC on-board equipment | |
| Electronic fee collection. Evaluation of equipment for conformity to ISO/TS 17575-4. Part 2: Abstract test suite (ISO/DTS 16403-2:2011) | |
| Electronic invoicing - Part 4: Guidelines on interoperability of electronic invoices at the transmission level | |
| Electronic invoicing - Part 5: Guidelines on the use of sector or country extensions in conjunction with EN 16931-1, methodology to be applied in the real environment | |
| Electronic invoicing - Part 6: Result of the test of EN 16931-1 with respect to its practical application for an end user | |
| Electronic public procurement - Business interoperability interfaces (BII), e-Catalogue - Part 101: Overview | |
| Electronic public procurement - Business interoperability interfaces (BII), e-Ordering - Part 101: Overview | |
| Electronic public procurement - Business interoperability interfaces (BII), e-Tendering - Part 101: overview | |
| Electronic Public Procurement - Innovation guideline - Part 2-1: Framework and models of innovative developments in procurement | |
| Electronic Public Procurement - Innovation guideline - Part 2-2: Identification of standardization activities to support innovative developments in procurement | |
| Electronic Public Procurement - Innovation guideline - Part 2-3: Legislation and regulations to enable and support innovative developments in procurement | |
| Energy Performance of Buildings - Basic Principles for the set of EPB standards | |
| Energy performance of buildings - Building automation, controls and building management - Part 2: Explanation and justification of ISO 52127-1 (ISO/TR 52127-2:2021) | |
| Energy performance of buildings - Contribution of building automation, controls and building management - Part 2: Explanation and justification of ISO 52120-1 (ISO/TR 52120-2:2021) | |
| Energy Performance of Buildings - Control for heating, ventilating and air-conditioning applications — Part 2: Accompanying TR prEN 15500-1:2015 - Modules M3-5,M4-5,M5-5 | |
| Energy performance of buildings - Economic evaluation procedure for energy systems in buildings - Part 2: Explanation and justification of EN 15459-1, Module M1-14 | |
| Energy performance of buildings - Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads - Part 2: Explanation and justification of ISO 52016-1 and ISO... | |
| Energy performance of buildings - Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads - Part 4: Explanation and justification of ISO 52016-3 (ISO/DTR 52016-4:2024)... | |
| Energy performance of buildings - Energy requirements for lighting - Part 2: Explanation and justification of EN 15193-1, Module M9 | |
| Energy performance of buildings - External climatic conditions - Part 2: Explanation and justification of ISO 52010-1 (ISO/TR 52010-2:2017) | |
| Energy performance of buildings - Heating systems and DHW in buildings - Part 2: Explanation and justification of EN 15378-1, Module M3-11 and M8-11 | |
| Energy performance of buildings - Heating systems and DHW in buildings - Part 4: Explanation and justification of EN 15378-3, Module M3-10, M8-10 | |
| Energy performance of buildings - Hygrothermal performance of building components and building elements - Part 2: Explanation and justification (ISO/TR 52019-2:2017) | |
| Energy performance of buildings - Indicators for partial EPB requirements related to thermal energy balance and fabric features - Part 2: Explanation and justification of ISO 52018-1 (ISO/TR 52018-2:2017) | |
| Energy performance of buildings - Indicators, requirements, ratings and certificates - Part 2: Explanation and justification of ISO 52003-1 (ISO/TR 52003-2:2017) | |
| Energy Performance of Buildings - Inspection of Building Automation, Controls and Technical Building Management - Part 2: Accompanying TR prEN 16946-1:2015 - Modules M10-11 | |
| Energy performance of buildings - Method for calculation of system energy performance and system efficiencies - Part 6-6: Explanation and justification of EN 15316-4-3, Module M3-8-3, M8-8-3 | |
| Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 6-10: Explanation and justification of EN 15316-5, Module M3-7, M8-7 | |
| Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 6-2: Explanation and justification of EN 15316-2, Module M3-5, M4-5 | |
| Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 6-3: Explanation and justification of 15316-3, Module M3-6, M4-6, M8-6 | |
| Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 6-4: Explanation and justification of EN 15316-4-1, Module M3-8-1, M8-8-1 | |
| Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 6-5: Explanation and justification of EN 15316-4-2, Module M3-8 | |
| Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 6-7: Explanation and justification of EN 15316-4-4, Module M8-3-4, M8-8-4, M8-11-4 | |
| Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 6-8: Explanation and justification of EN 15316-4-5 (District heating and cooling), Module M3-8-5,... | |
| Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 6-9: Explanation and justification of EN 15316-4-8, Module M3-8-8 | |
| Energy performance of buildings - Method for calculation of the design heat load - Part 2: Explanation and justification of EN 12831-1, Module M3-3 | |
| Energy performance of buildings - Method for calculation of the design heat load - Part 4: Explanation and justification of EN 12831-3, Module M8-2, M8-3 | |
| Energy performance of buildings - Overarching EPB assessment - Part 2: Explanation and justification of ISO 52000-1 (ISO/TR 52000-2:2017) | |
| Energy performance of buildings - Part 2: Accompanying TR prEN 15232-1:2015 - Modules M10-4,5,6,7,8,9,10 | |
| Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 2: Explanation and justification (ISO/TR 52022-2:2017) | |
| Energy performance of buildings - Ventilation for buildings - Part 10: Interpretation of the requirements in EN 16798-9 - Calculation methods for energy requirements of cooling systems (Module M4-1,M4-4, M4-9)... | |
| Energy performance of buildings - Ventilation for buildings - Part 14: Interpretation of the requirements in EN 16798-13 - Calculation of cooling systems (Module M4-8) - Generation | |
| Energy performance of buildings - Ventilation for buildings - Part 16: Interpretation of the requirements in EN 16798-15 - Calculation of cooling systems (Module M4-7) - Storage | |
| Energy performance of buildings - Ventilation for buildings - Part 18: Interpretation of the requirements in EN 16798-17 - Guidelines for inspection of ventilation and air-conditioning systems (Modules M4-11, M5-11,... | |
| Energy performance of buildings - Ventilation for buildings - Part 4: Interpretation of the requirements in EN 16798- 3 - For non-residential buildings - Performance requirements for ventilation and room-conditioning... | |
| Energy performance of buildings - Ventilation for buildings - Part 6: Interpretation of the requirements in EN 16798-5 -1 and EN 16798-5-2 - Calculation methods for energy requirements of ventilation... | |
| Energy performance of buildings - Ventilation for buildings - Part 8: Interpretation of the requirements in EN 16798-7 - Calculation methods for the determination of air flow rates in buildings... | |
| Energy performance of buildings- Method for calculation of system energy requirements and system efficiencies - Part 6-1: Explanation and justification of EN 15316-1, Module M3-1, M3-4, M3-9, M8-1, M8-4 | |
| Environmental management - Life cycle assessment - Critical review processes and reviewer competencies: Additional requirements and guidelines to ISO 14044:2006 (ISO/TS 14071:2014) | |
| Ergonomics - Anthropometric and strength data of children in Europe - Part 1: Statistical summaries of the data | |
| Ergonomics - Demands and Availability of anthropometric and strength data of children in Europe | |
| Ergonomics - Manual handling of people in the healthcare sector (ISO/TR 12296:2012) | |
| Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities (ISO/TR 22411:2008) | |
| Ergonomics of human-system interaction - Part 100: Introduction to standards related to software ergonomics (ISO/TR 9241-100:2010) | |
| Ergonomics of human-system interaction - Part 112: Principles for the presentation of information (ISO 9241-112:2017) | |
| Ergonomics of human-system interaction - Part 126: Guidance on the presentation of auditory information (ISO/TS 9241-126:2019) | |
| Ergonomics of human-system interaction - Part 161: Guidance on visual user-interface elements (ISO 9241-161:2016) | |
| Ergonomics of human-system interaction - Part 161: Visual user-interface elements (ISO 9241-161:2025) | |
| Ergonomics of human-system interaction - Part 171: Software accessibility (ISO 9241-171:2025) | |
| Ergonomics of human-system interaction - Part 300: Introduction to electronic visual display requirements (ISO 9241-300:2008) | |
| Ergonomics of human-system interaction - Part 302: Terminology for electronic visual displays (ISO 9241-302:2008) | |
| Ergonomics of human-system interaction - Part 303: Requirements for electronic visual displays (ISO 9241-303:2008) | |
| Ergonomics of human-system interaction - Part 304: User performance test methods for electronic visual displays (ISO 9241-304:2008) | |
| Ergonomics of human-system interaction - Part 305: Optical laboratory test methods for electronic visual displays (ISO 9241-305:2008) | |
| Ergonomics of human-system interaction - Part 306: Field assessment methods for electronic visual displays (ISO 9241-306:2008) | |
| Ergonomics of human-system interaction - Part 307: Analysis and compliance test methods for electronic visual displays (ISO 9241-307:2008) | |
| Ergonomics of human-system interaction - Part 331: Optical characteristics of autostereoscopic displays (ISO/TR 9241-331:2012) | |
| Ergonomics of human-system interaction - Part 333: Stereoscopic displays using glasses (ISO 9241-333:2017) | |
| Ergonomics of human-system interaction - Part 391: Requirements, analysis and compliance test methods for the reduction of photosensitive seizures (ISO 9241-391:2016) | |
| Ergonomics of human-system interaction - Part 392: Ergonomic recommendations for the reduction of visual fatigue from stereoscopic images (ISO 9241-392:2015) | |
| Ergonomics of human-system interaction - Part 410: Design criteria for physical input devices (ISO 9241-410:2008) | |
| Ergonomics of human-system interaction - Part 410: Design criteria for physical input devices (ISO 9241-410:2008/AMD 1:2012) | |
| Ergonomics of human-system interaction - Part 920: Guidance on tactile and haptic interactions (ISO 9241-920:2009) | |
| Ergonomics of the thermal environment - Estimation of thermal insulation and water vapour resistance of a clothing ensemble (ISO 9920:2007, Corrected version 2008-11-01) | |
| Estimation of uncertainty in the single burning item test | |
| EUROCODE 1: BASIS OF DESIGN AND ACTIONS ON STRUCTURES. PART 2-7: ACTIONS ON STRUCTURES. ACCIDENTAL ACTIONS DUE TO IMPACT AND EXPLOSIONS. | |
| EUROCODE 1: BASIS OF DESIGN AND ACTIONS ON STRUCTURES. PART 5: ACTIONS INDUCED BY CRANES AND OTHER MACHINERY. | |
| EUROCODE 3: DESIGN OF STEEL STRUCTURES. PART 1-5: GENERAL RULES. SUPPLEMENTARY RULES FOR PLANAR PLATED STRUCTURES WITHOUT TRANSVERSE LOADING | |
| EUROCODE 3: DESIGN OF STEEL STRUCTURES. PART 1-7: GENERAL RULES. SUPPLEMENTARY RULES FOR PLANAR PLATED STRUCTURAL ELEMENTS WITH OUT OF PLANE LOADING | |
| EUROCODE 3: DESIGN OF STEEL STRUCTURES. PART 2: STEEL BRIDGES | |
| EUROCODE 3: DESIGN OF STEEL STRUCTURES. PART 4-1: SILOS, TANKS AND PIPELINES. SILOS | |
| EUROCODE 3: DESIGN OF STEEL STRUCTURES. PART 4-2: SILOS, TANKS AND PIPELINES. TANKS | |
| EUROCODE 3: DESIGN OF STEEL STRUCTURES. PART 4-3: SILES, TANKS AND PIPELINES. PIPELINES | |
| EUROCODE 3: DESIGN OF STEEL STRUCTURES. PART 5: PILING. | |
| EUROCODE 3: DESIGN OF STEEL STRUCTURES. PART 6: CRANE SUPPORTING STRUCTURES | |
| EUROCODE 6: DESIGN OF MASONRY STRUCTURES. PART 1-2: GENERAL RULES. STRUCTURAL FIRE DESIGN. | |
| EUROCODE 8: DESIGN PROVISIONS FOR EARTHQUAKE RESISTANCE OF STRUCTURES.PART 1-4: GENERAL RULES. STRENGTHENING AND REPAIR OF BUILDINGS | |
| European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products | |
| Evaluating the performance of continuous air monitors - Part 1: Air monitors based on accumulation sampling techniques (ISO/TR 22930-1:2020) | |
| Evaluating the performance of continuous air monitors - Part 2: Air monitors based on flow-through sampling techniques without accumulation (ISO/TR 22930-2:2020) | |
| Execution of concrete structures - Part 1: Common | |
| Execution of steel structures and aluminium structures - Reuse of structural steel | |
| Execution of steel structures. Part 1: General rules and rules for buildings | |
| External fire exposure of roofs and roof coverings - Extended application of test results from CEN/TS 1187 | |
| Facility management - Existing performance management in facility management organizations - State of the industry (ISO/TR 41030:2024) | |
| Facility management - Overview of available technologies (ISO/TR 41016:2024). | |
| Facility Management - Part 9: Study of area and space measurement standards and guidelines used in Europe | |
| Facility management’s role in sustainability, resilience and adaptability (ISO/TR 41019:2024) | |
| Fast pyrolysis bio-oil for stationary internal combustion engines - Quality determination | |
| Fasteners - Fundamentals of hydrogen embrittlement in steel fasteners (ISO/TR 20491:2019) | |
| Fasteners - Grooved pins - One-third-length center grooves (ISO 8742:2026) | |
| Fertilizers - Determination of trace elements - Determination of arsenic by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution | |
| Fertilizers - Determination of trace elements - Determination of cadmium, chromium, lead and nickel by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution | |
| Fertilizers - Determination of trace elements - Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B) | |
| Fertilizers - Determination of trace elements - Determination of mercury by vapour generation (VG) after aqua regia dissolution | |
| Fertilizers and liming materials - Sampling of static heaps - Technical report on experimental sampling trials performed under mandate M/454 | |
| Flanges and their joints - Design rules for gasketed circular flange connections - Part 6: Background information | |
| Food analysis - Performance criteria for single laboratory validated methods of analysis for the determination of mycotoxins | |
| Foods of plant origin - Multimethod for the determination of pesticide residues using GC- or LC-based analysis following acetonitrile extraction/partition ing and cleanup by dispersive SPE - Validation data of... | |
| FOODSTUFF - DETERMINATION OF NITRATE AND/OR NITRITE CONTENT- PART 4: IC METHOD FOR THE DETERMINATION OF NITRATE AND NITRITE CONTENT OF MEAT AND MEAT PRODUCTS | |
| Foodstuffs - Detection of food allergens by immunological methods - Part 2: Quantitative determination of hazelnut with an enzyme immunoassay using monoclonal antibodies and bicinchoninic acid-protein detection | |
| Foodstuffs - Detection of food allergens by molecular biological methods - Part 2: Celery (Apium graveolens) - Qualitative determination of a specific DNA sequence in cooked sausages by real-time PCR... | |
| Foodstuffs - Determination of fumonisin B1 and fumonisin B2 in processed maize containing foods for infants and young children - HPLC method with immunoaffinity column cleanup and fluorescence detection after... | |
| FOODSTUFFS. DETERMINATION OF NITRATE AND/OR NITRITE CONTENT. PART 3: SPECTROMETRIC DETERMINATION OF NITRATE AND NITRITE CONTENT OF MEAT PRODUCTS AFTER ENZYMATIC REDUCTION OF NITRATE TO NITRITE. | |
| Footwear - Critical substances potentially present in footwear and footwear components (ISO/TR 16178:2010) | |
| Footwear - Critical substances potentially present in footwear and footwear components - Test method to quantitatively determine dimethylformamide in footwear materials (ISO/TS 16189:2013) | |
| Footwear - Critical substances potentially present in footwear and footwear components - Test method to quantitatively determine polycyclic aromatic hydrocarbons (PAH) in footwear materials (ISO/TS 16190:2013) | |
| Footwear - Footwear industry guideline for substances of very high concern (Annex XIV of REACH) | |
| Footwear - Performance requirements for components for footwear - Accessories (ISO/TS 20358:2024) | |
| Footwear - Performance requirements for components for footwear - Heels and top pieces (ISO/TS 23889:2024) | |
| Footwear - Performance requirements for components for footwear - Insoles (ISO/TS 20955:2024) | |
| Footwear - Performance requirements for components for footwear - Lining and insocks (ISO/TS 20953:2024) | |
| Footwear - Performance requirements for components for footwear - Outsoles (ISO/TS 20939:2024) | |
| Footwear - Performance requirements for components for footwear - Shanks (ISO/TS 20961:2024) | |
| Footwear - Performance requirements for components for footwear - Stiffeners and toe puffs (ISO/TS 20995:2024) | |
| Footwear - Performance requirements for components for footwear - Uppers (ISO/TS 20952:2024) | |
| Framework for a specification on the avoidance of a damaging Alkali-Silica Reaction (ASR) in concrete | |
| Framework for Artificial Intelligence (AI) Systems Using Machine Learning (ML) - Amendment 1: Generative AI (ISO/IEC 23053:2022/DAmd1:202 5) | |
| Framework for standardization of signatures - Extended structure including electronic identification and authentication | |
| Fruit and vegetable juices - Determination of the stable carbon isotope ratio (13C/12C) of sugars from fruits juices - Method using isotope ratio mass spectrometry | |
| Fruit and vegetable juices - Determination of the stable hydrogen isotope ratio (2H/1H) of water from fruit juices - Method using isotope ratio mass spectrometry | |
| Fruit and vegetable juices - Determination of the stable oxygen isotope (18O/16O) of water from fruit juices - Method using isotope ratio mass spectrometry | |
| Furniture - Common test equipment - Test foams and mattresses | |
| Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 4: Stainless steel cylinders with an R m value of less than 1... | |
| Gas Infrastructure - CEN/TC 234 Pressure Definitions - Guideline Document | |
| Gas infrastructure - Implementation Guide for Functional Standards prepared by CEN/TC 234 - Part 2: National Pages related to CEN/TC 234 standards | |
| Gas-fired central heating boilers - Part 3-3: 100 % Hydrogen - Expansion of EN 15502-2-1:2022 | |
| Gas-Specific Environmental Document - Guideline for incorporating within standards to minimize the environmental impact of gas infrastructure across the whole life cycle | |
| Geographic information - Gap analysis of geospatial standards for indoor-outdoor seamless navigation (ISO/TR 19175:2025) | |
| GEOGRAPHIC INFORMATION. DATA DESCRIPTION. TRANSFER | |
| Geosynthetics - Sampling and preparation of test specimens - Amendment 1: Sample preparation for Geosynthetic Cementitious Composites (GCCs) (ISO 9862:2023/DAmd1:2025 ) | |
| GRP tanks and vessels for use above ground - Part 5: Example calculation of a GRP-vessel | |
| Guidance for selection, use, care and maintenance of protective clothing against heat and flame | |
| Guidance for signature creation and other related devices | |
| Guidance for the implementation of environmental aspects in product standards and system standards in the field of wastewater engineering | |
| Guidance on design, selection and installation of vents to safeguard the structural integrity of enclosures protected by gaseous fire-extinguishing systems (ISO/TS 21805:2018) | |
| Guidance on how to implement EN ISO 19650-1 and -2 in Europe | |
| Guidance on the application of statistical methods for determining the properties of masonry products | |
| Guidance on the relationship between EN ISO 13485: 2016 (Medical devices - Quality management systems - Requirements for regulatory purposes) and European Medical Devices Regulation and In Vitro Diagnostic Medical... | |
| GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT | |
| Guidelines for a procedure to support the European standardization of cements | |
| Guidelines for building multimodal travel purchase APIs based on Transmodel | |
| Guidelines for safety and risk assessment of LNG fuel bunkering operations (ISO/TS 18683:2021) | |
| Guidelines for selection, use, care and maintenance of protective clothing against foul weather, wind and cold | |
| Guidelines for the evaluation of uncertainty of measurement in air conditioner and heat pump cooling and heating capacity tests (ISO/TS 16491:2012) | |
| Guidelines for the preparation of standard routine methods with wavelength-dispersiv e X-ray fluorescence spectrometry | |
| Guidelines for the validation of qualitative screening methods for the detection of residues of veterinary drugs in milk and milk products (ISO/TS 23758:2021) | |
| Guidelines for water safety plan concept in buildings | |
| Guidelines on implementing EN 1090-1:2009+A1:2011. Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components | |
| Hand protection - Guidance for selection and use (ISO/TR 8546:2022) | |
| Health informatics - Identification of medicinal products (IDMP) - Part 1: Implementation of ISO 11238 (general) (ISO/DTS 19844-1:2026) | |
| Health informatics - Identification of medicinal products - Implementation for ISO 11616 data elements and structures for the unique identification and exchange of regulated pharmaceutical product information (ISO/DTS 20451:2025) | |
| Health informatics - Identification of medicinal products - Implementation guide for ISO 11239 data elements and structures for the unique identification and exchange of regulated information on pharmaceutical dose forms,... | |
| Health informatics - Identification of medicinal products - Implementation guidelines for data elements and structures for the unique identification and exchange of regulated information on substances (ISO/TS 19844:2016) | |
| Health informatics - Requirements for international machine-readable coding of medicinal product package identifiers (ISO/TS 16791:2014) | |
| Health informatics - Requirements for medicinal product dictionary systems for health care (ISO/TS 19256:2016) | |
| Horizontal methods for molecular biomarker analysis - Methods of analysis for the detection of genetically modified organisms and derived products - Part 10: Construct- and event-specific detection methods for genetically... | |
| Human Factors (HF);Telecare services;Issues and recommendations for user aspects | |
| Human response to vibration - Guidance and terminology for instrumentation and equipment for the assessment of daily vibration exposure at the workplace according to the requirements of health and safety... | |
| Hydrometry - The application of propeller-type current meters and their calibration | |
| IDENTIFICATION CARD SYSTEMS. INTEGRATED CIRCUIT(S) CARDS AND INTERFACE DEVICES. ADDITIONAL TEST METHODS. | |
| IDENTIFICATION CARD SYSTEMS. RULES FOR PERSONAL IDENTIFICATION NUMBER HANDLING IN INTERSECTOR ENVIRONMENT. PART 1: PIN PRESENTATION. | |
| IDENTIFICATION CARD SYSTEMS. RULES FOR PERSONAL IDENTIFICATION NUMBER HANDLING IN INTERSECTOR ENVIRONMENTS. PART 3: PIN VERIFICATION. | |
| IDENTIFICATION CARDS. INTEGRATED CIRCUIT(S) CARDS WITH CONTACTS. PART 5: NUMBERING SYSTEM AND REGISTRATION PROCEDURE FOR APPLICATION IDENTIFIERS. AMENDMENT 1 (ISO/IEC 7816-5:1994/AMD 1:1996) | |
| Industrial Gas Installation - Guideline | |
| Information technology - Artificial intelligence - Artificial intelligence concepts and terminology - Amendment 1: Generative AI (ISO/IEC 22989:2022/DAmd1:202 5) | |
| Information technology - Artificial intelligence - Guidance on risk management (ISO/IEC 23894:2023) | |
| Information technology - Notification of RFID - Additional information to be provided by operators | |
| Information technology - Security techniques - Guidelines for privacy impact assessment - Amendment 1 (ISO/IEC 29134:2017/DAM 1:2022) | |
| Installation of thermal energy meters - Guidelines for the selection, installation and operation of thermal energy meters | |
| Installation rules of fibrous (gypsum) plaster works | |
| INTEGRATED SERVICES DIGITAL NETWORK (ISDN). 3,1 kHz TELEPHONY TELESERVICE. END-TO-END COMPATIBILITY REQUIREMENTS FOR TELEPHONY TERMINALS. | |
| Intelligent transport systems - Cooperative ITS - ITS station facilities for the transfer of information between ITS stations (ISO/TS 17429:2017) | |
| Intelligent transport systems - Cooperative ITS - Using V2I and I2V communications for applications related to signalized intersections (ISO/TS 19091:2017) | |
| Intelligent transport systems - Cooperative systems - Classification and management of ITS applications in a global context (ISO/TS 17419:2014) | |
| Intelligent transport systems - Cooperative systems - ITS application requirements and objectives for selection of communication profiles (ISO/TS 17423:2014) | |
| Intelligent transport systems - Cooperative systems - Roles and responsibilities in the context of cooperative ITS based on architecture(s) for cooperative systems (ISO/TS 17427:2014) | |
| Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 8: Traffic management publications and extensions dedicated to the urban environment | |
| Intelligent transport systems - Ecall - Additional data concept specification for heavy goods vehicles | |
| Intelligent transport systems - Privacy aspects in ITS standards and systems in Europe | |
| Intelligent transport systems - Public transport - Traveller Information for Visually Impaired People (TI-VIP) | |
| Intelligent transport systems - Standards and actions necessary to enable urban infrastructure coordination to support Urban-ITS | |
| Iron and steel - European standards for the determination of chemical composition | |
| Liquid chromatography at critical conditions (LCCC) - Chemical heterogeneity of polyethylene oxides (ISO/TS 23973:2020) | |
| Liquid petroleum products - Determination of hydrocarbon types and oxygenates via multidimensional gas chromatography method - Round Robin research report | |
| Liquid petroleum products - Investigation on test method for measurement of the oxidation stability of diesel and diesel/FAME blends by Acid Number after ageing | |
| MANIPULATING INDUSTRIAL ROBOTS. COORDINATE SYSTEMS AMD MOTION NOMENCLATURES (ISO 9787:1999) | |
| MANIPULATING INDUSTRIAL ROBOTS. PERFORMANCE CRITERIA AND RELATED TEST METHODS (ISO 9283:1996) | |
| MANIPULATING INDUSTRIAL ROBOTS. PRESENTATION OF CHARACTERISTICS (ISO 9946:1999) | |
| Manual measurement of snow water equivalent | |
| Masonry cement - Testing for workability (cohesivity) | |
| Maturity assessment of Common European Data Spaces | |
| Measurement of the coating properties of non-oriented electrical steel | |
| Mechanical products - Conditions to set up environmental communication models by recognizing sectorial particularities | |
| Mechanical properties of fasteners made of carbon steel and alloy steel. Part 1: Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread (ISO 898-1:2009/DAM 1:2010)... | |
| Mechanical vibration - Guide to the health effects of vibration on the human body | |
| Medical devices - Guidance on the application of ISO 14971 - Part 2: Machine learning in artificial intelligence (ISO/DTS 24971-2:2026) | |
| Medical gas pipeline systems - Part 6: Dimensions and allocation of probes for terminal units for compressed medical gases and vacuum | |
| Medical gloves for single use - Guidance for selection | |
| Metallic industrial piping - Part 7: Guidance on the use of conformity assessment procedures | |
| Metallic materials - Tensile testing - Part 5: Specification for testing miniaturised test pieces (ISO/TS 6892-5:2025) | |
| Method for the determination of C3A in the clinker from cement analysis | |
| Method of polishing specimens prior to the measurement of slip and skid resistance | |
| Methods of determination of the mechanical properties of self-bonding coating assemblies related to non-oriented electrical steels | |
| Microbiology - Cosmetics - Guidelines for the application of ISO standards on Cosmetic Microbiology (ISO/TR 19838:2016) | |
| Microbiology of food and animal feed - Horizontal method for determination of hepatitis A virus and norovirus in food using real-time RT-PCR - Part 1: Method for quantification (ISO/TS 15216-1:2013,... | |
| Microbiology of food and animal feed - Horizontal method for determination of hepatitis A virus and norovirus in food using real-time RT-PCR - Part 2: Method for qualitative detection (ISO/TS... | |
| Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Detection of botulinum type A, B, E and F neurotoxin-producing clostridia (ISO/TS 17919:2013)... | |
| Mountaineering equipment - Braking devices - Part 3: Braking devices with amplified braking | |
| Nanotechnologies - Plain language explanation of selected terms from the ISO/IEC 80004 series (ISO/TR 18401:2017) | |
| Nanotechnologies - Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry (ISO/TS 19590:2017) | |
| Nanotechnologies - Vocabulary - Part 12: Quantum phenomena in nanotechnology (ISO/TS 80004-12:2016) | |
| Nanotechnologies - Vocabulary - Part 2: Nano-objects (ISO/TS 80004-2:2015) | |
| Nanotechnologies - Vocabulary - Part 3: Carbon nano-objects (ISO/TS 80004-3:2020) | |
| Natural stones - Guidance for use of natural stones | |
| Non-destructive testing - Lighting in penetrant and magnetic particle testing, good practice | |
| Non-destructive testing - Methods for absolute calibration of acoustic emission transducers by the reciprocity technique (ISO/TR 13115:2011) | |
| Nuclear sector - Requirements for bodies providing audit and certification of quality management systems for organizations supplying products and services important to nuclear safety (ITNS) (ISO/TS 23406:2020) | |
| One Post Equipment - Inspection Guidance | |
| Ophthalmic optics - Uncut finished spectacle lenses - Part 3: Transmittance specifications and test methods - Amendment 1 (ISO 8980 3:2022/DAM 1:2025) | |
| Optimal design of hydrometric networks | |
| Paints and varnishes - Adhesion of coatings (ISO/TR 19402:2018) | |
| Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of air inclusions/microfoam in coating films | |
| Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of film extensibility by indentation of a coating on a wooden substrate | |
| Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of knot staining resistance of wood coatings | |
| Paints and varnishes - Coating systems for wind-turbine rotor blades - Part 5: Measurement of transmittance properties of UV protective coatings (ISO/TS 19392-5:2023) | |
| Paints and varnishes - Coating systems for wind-turbine rotor blades - Part 6: Determination and evaluation of ice adhesion using centrifuge (ISO/TS 19392-6:2023) | |
| Paints and varnishes - Overview of test methods on hardness and wear resistance of coatings (ISO/TR 21555:2019) | |
| PAINTS AND VARNISHES - QUALIFICATION OF PAINT INSPECTORS FOR CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS | |
| Personal protective equipment - Smart garments - Terms and Definitions | |
| Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry (ISO 8754:2025) | |
| Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylen (PE) - Part 2: Guidance for the assessment of conformity | |
| Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity | |
| Plastics - Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance (ISO/TR 18486:2016) | |
| Plastics - Standard table for reference global solar spectral irradiance at sea level - Horizontal, relative air mass 1 (ISO/TR 17801:2014) | |
| Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 7: Guidance for the assessment of conformity (ISO/TS 22391-7:2018) | |
| Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT).Part 7: Guidance for the assessment of conformity (ISO/DTR 22391-7:2010) | |
| Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 2: Guidance for the assessment of conformity | |
| Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 4: Assessment of conformity | |
| Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity | |
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation | |
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Assessment of conformity | |
| Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity | |
| Plastics recycling - Classification of plastic recyclates as post-consumer recyclates (PCR) and post-industrial recyclates (PIR) | |
| Playground and recreational areas - Framework for the competence of playground inspectors | |
| Playground equipment for children Part 2: Replies to requests for interpretation of EN 1176:2017 and its parts (2020 - 2022) | |
| Playground equipment for children - Replies to requests for interpretation of EN 1176 and its parts. | |
| Playground equipment for children - Replies to requests for interpretation of EN 1176:2008 and its parts | |
| Postal services – Safe, secured and contactless delivery of postal items | |
| Postal services - Automatic identification of items - Two dimensional bar code symbol print quality specification for machine readable Digital Postage Marks | |
| Postal Services - Quality of Service - Measurement of incorrect delivery - Feasibility Report | |
| Postal services - Transit time measurement for cross border postal items using real mail feasibility study | |
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 10: Field method for the titrimetric determination of water-soluble... | |
| Pressure equipment - Part 6: Structure and content of operating instructions | |
| Prevention of crime - Urban planning and building design - Part 6: Schools and educational institutions | |
| Primary cables for airport lighting. | |
| Principles of the equivalent durability procedure | |
| Processing of health care products - Information to be provided by the medical device manufacturer for the processing of medical devices - Part 3: Guidance on the designation of a... | |
| Protective clothing - Guidelines for selection, use, care and maintenance of chemical protective clothing | |
| Public transport – Common Glossary | |
| Public transport - Interoperable fare management system - Bluetooth low energy ticketing use cases and guidelines | |
| Public transport - Interoperable fare management system - Part 2: Business practices (ISO/TR 24014-2:2013) | |
| Public transport - Interoperable fare management system - Part 3: Complementary concepts to Part 1 for multi-application media (ISO/TR 24014-3:2013) | |
| Public transport - Road vehicle scheduling and control systems - Part 2: WORLDFIP cabling specifications. | |
| Public transport - Road vehicle scheduling and control systems - Part 8: Physical layer for IP communication | |
| PUBLIC TRANSPORT. ROAD VEHICLE SCHEDULING AND CONTROL SYSTEMS. PART 1: WORLDFIP DEFINITION AND APPLICATION RULES FOR ONBOARD DATA TRANSMISSION | |
| Quantifying irradiance for eye-mediated non-image-forming effects of light in humans | |
| Radio broadcasting systems; Very High Frequency (VHF), frequency modulated, sound broadcasting transmitters | |
| Radio Equipment and Systems (RES). Land mobile group. Technical characteristics and test condicionts for radio equipment with an internal or external RF connector intended primarily for analogue speech. | |
| Radio Equipment and Systems (RES). Land mobile group. Technical characteristics and test conditions for radio equipment with an internal or external RF connector intended primarily for analogue speech. | |
| Radio Equipment and Systems (RES); Angle-modulated Citizens Band radio equipment (CEPT PR 27 Radio Equipment); Technical characteristics and methods of measurement | |
| Radio Equipment and Systems (RES); ElectroMagnetic Compatibility (EMC) standard for Short Range Devices (SRD) operating on frequencies between 9 kHz and 25 GHz | |
| Radiological protection - Characteristics of reference pulsed radiation - Part 1: Photon radiation (ISO/TS 18090-1:2015) | |
| Railway applications - Driver's cab - Background information on anthropometric data | |
| Railway applications - Gauges - Part 5: Background, explanation and worked examples | |
| Railway applications - Technical Report about the revision of EN 14363 | |
| Railway applications - Vehicle Maintenance - Maintenance File | |
| RAILWAY APPLICATIONS. FIXED INSTALLATIONS. PARTICULAR REQUIREMENTS FOR A.C. SWITCHGEAR. PART 3: MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN A.C. TRACTION SYSTEMS. SECTION 1: APPLICATION GUIDE. | |
| RAILWAY APPLICATIONS. SAFETY RELATED ELECTRONIC SYSTEMS FOR SIGNALLING. | |
| Reciprocating internal combustion engine driven alternating current generating sets - Part 13: Safety (ISO 8528-13:2026) | |
| Report on installation scenarios, available test methods and national legislation to be considered for the fire performance classification of roof systems with above roof mounted PV modules | |
| Requirements for electronic advanced data (EAD) in postal operations, in particular compliant to security and customs requirements | |
| Requirements to connect, access, participate and further develop open global networks and systems, for postal operators and the wider postal sector players | |
| Resilient, textile, laminate and modular mechanical locked floor coverings - Guidance on how to implement EN 14041:2004/AC:2006 under the Construction Products Regulation EU 305/2011 (CPR) | |
| Resistance of metallic materials to liquid biogenic and alternative fuels and their blends | |
| Road and airfield surface characteristics - Part 11: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal block measurement (LFCSR): the SRM | |
| Road and airfield surface characteristics - Part 12: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip: the BV 11 and Saab... | |
| Road and airfield surface characteristics - Part 13: Procedure for determining the skid resistance of a pavement surface by measurement of a sideway force coefficient (SFCO): the Odoliograph | |
| Road infrastructure - Automated vehicle interactions - Reference Framework Release 1 | |
| Road lighting - Part 1: Guidelines on selection of lighting classes | |
| Road restraint systems — Determination of collision forces on bridges as a result of an impact of a vehicle on a restraint system | |
| Road restraint systems - General requirements for the competence of laboratories performing virtual testing for the evaluation of vehicle restraint systems | |
| Road restraint systems - Part 6: Pedestrian restraint system - Pedestrian parapets | |
| ROAD TRANSPORT AND TRAFFIC TELEMATICS (RTTT). ELECTRONIC FEE COLLECTION (EFC). APPLICATION INTERFACE DEFINITION FOR DEDICATED SHORT RANGE COMMUNICATIONS (ISO/TR 14906:1998) | |
| Road transport and traffic telematics - Automatic vehicle and equipment identification - Numbering and data structures (ISO /TR 14816:2000) | |
| Road transport and traffic telematics - Automatic vehicle and equipment identification - System specification (ISO/TR 14815:2000) | |
| Road transport and traffic telematics - Public transport - Non-interactive dynamic passenger information on ground | |
| ROAD TRANSPORT AND TRAFFIC TELEMATICS. AUTOMATIC FEE COLLECTION (AFC). INTERFACE SPECIFICATION FOR CLEARING BETWEEN OPERATORS (ISO 14904:1997) | |
| ROAD TRANSPORT AND TRAFFIC TELEMATICS. AUTOMATIC VEHICLE AND EQUIPMENT IDENTIFICATION. PART 1: REFERENCE ARCHITECTURES AND TERMINOLOGY | |
| ROAD TRANSPORT AND TRAFFIC TELEMATICS. PUBLIC TRANSPORT. REFERENCE DATA MODEL | |
| ROTODYNAMIC PUMPS. CODE FOR HYDRAULIC PERFORMANCE TESTS FOR ACCEPTANCE. GRADES 1 AND 2 (ISO/DIS 9906:1995) | |
| Rubber materials obtained from EndofLife Tyres – Guidelines for the compliance to CLP and REACH regulations – Granulates and powders | |
| Safety of escalators and moving walks - Part 3: Correlation between EN 115:1995 and its amendments and EN 115-1:2008 | |
| Safety of escalators and moving walks - Part 4: Interpretations related to EN 115 family of standards | |
| Safety of machinery - Relationship with ISO 12100 - Part 1: How ISO 12100 relates to type-B and type-C standards (ISO/TR 22100-1:2015) | |
| Safety of toys - Interpretations - Part 1: Replies to requests for interpretation of EN 71-1, EN 71-2, EN 71-8 and EN 71-14 | |
| Safety of toys - Interpretations - Part 2: Replies to requests for interpretation of the chemical standards in the EN 71-series | |
| Safety of toys - Mechanical and physical properties - Guidance on categorisation of projectile toys within EN 71-1 | |
| Safety of toys - Replies to requests for interpretation of EN 71-1, EN 71-2, and EN 71-8 | |
| Safety rules for the construction and installation of lifts - Basics and interpretations - Part 12: Use of EN 81-20 and EN 81-50 in specific markets | |
| Safety, protective and occupational footwear for professional use - Test method for the determination of slip resistance | |
| Sanitary appliances - Drainage systems for the application of sanitary appliances | |
| Screening test for the presence of nickel in articles which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with... | |
| Sealants for non-structural use in joints in buildings and pedestrian walkways - Guidance for CE marking and Declaration of Performance (DoP) | |
| Selection, use, care and maintenance of personal protective equipment for preventing electrostatic risks in hazardous areas (explosion risks) | |
| Service Interface for Real Time Information (SIRI) - Part 7: Passenger Real-Time Information European Profile | |
| Soil quality - Determination of soil microbial diversity - Part 2: Method by phospholipid fatty acid analysis (PLFA) using the simple PLFA extraction method (ISO/TS 29843-2:2021) | |
| Solar energy systems for roofs - Requirements for structural connections to solar panels | |
| Solid biofuels - Determination of grindability - Hardgrove type method for thermally treated biomass fuels (ISO/TS 21596:2021) | |
| Solid recovered fuels - Determination of self-heating - Part 2: Basket heating tests (ISO/TS 21911-2:2022) | |
| Sources of error in the use of electrochemical impedance spectroscopy for the investigation of coatings and other materials (ISO/TR 5602:2021) | |
| Space - Use of GNSS-based positioning for road Intelligent Transport System (ITS) - Security attacks modelling and definition of performance features and metrics related to security | |
| Sports and other recreational facilities and equipment - Injury and safety definitions and thresholds - Guidelines for their inclusion in standards (ISO/TR 20183:2015) | |
| Standard method for assessing and improving the energy efficiency of waste water treatment plants | |
| Stationary source emissions - Guidance on the application of EN ISO 16911-1 | |
| Steel for the reinforcement of concrete - Weldable reinforcing steels - Reinforcement bars de-coiled by processor | |
| Steels and cast irons - Determination of substances listed in the directives 2011/65/EU (RoHS) and 2000/53/EC (ELV) - Limitations | |
| Surface active agents- Surface ethoxylated alcohols and alkylphenols- Determination of content of unsulfated matter- Amendment 1 (ISO 8799:1995/DAM 1:2007) | |
| Survey on provisions valid in the place of use used in conjunction with the European concrete standard and developing practice | |
| Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 2: Conformity assessment including chain of custody and mass balance... | |
| Sustainable Cities and Communities - A framework for standardization of services to the citizen | |
| Sustainable construction with concrete - Part 1 - Practical guidance | |
| Sustainable construction with concrete - Part 2 – Further potential for optimisation | |
| Systems and software engineering - Software product Quality Requirements and Evaluation (SQuaRE) - Common Industry Format (CIF) for usability: User needs report (ISO/IEC 25064:2013) | |
| Systems and software engineering - Systems and software product Quality Requirements and Evaluation (SQuaRE) - Common Industry Format (CIF) for usability: Context of use description (ISO/IEC 25063:2014) | |
| Systems and software engineering - Systems and software product Quality Requirements and Evaluation (SQuaRE) - Common Industry Format (CIF) for usability: General framework for usability-related information (ISO/IEC TR 25060:2010) | |
| Tanks for transport of dangerous goods - Guidance and recommendations for loading, transport and unloading | |
| Technical report regarding precision data for standards EN 12720, EN 12721, EN 12722, EN 15185 and EN 15186 | |
| Telecommunications security. Lawful Interceptio (LI). Handover interface for the lawful interception of telecommunications traffic. | |
| Textile products and nanotechnologies - Guidance on tests to simulate nanoparticle release - Skin exposure | |
| Textiles and textile products - Guidance on health and environmental issues related to chemical content of textile products intended for clothing, interior textiles and upholstery | |
| Textiles and textile products - Smart (Intelligent) textiles - Definitions, categorisation, applications and standardization needs (ISO/TR 23383:2020) | |
| Textiles and textile products - Textiles with integrated electronics and ICT - Definitions, categorisation, applications and standardisation needs | |
| Textiles for healthcare and social services facilities | |
| Traffic and Travel Information (TTI). TTI Messages via traffic message coding. Part 3: Location referencing for ALERT-C (ISO/TS 14819-3:2000). | |
| TRAFFIC AND TRAVELLER INFROMATION (TTI). TTI MESSAGES VIA DEDICATED SHORT-RANGE COMMUNICATION. PART 1: DATA SPECIFICATION. DOWNLINK (ROADSIDE TO VEHICLE) | |
| TRAFFIC AND TRAVELLER INFROMATION (TTI). TTI MESSAGES VIA DEDICATED SHORT-RANGE COMMUNICATION. PART 2: DATA SPECIFICATION. UPLINK (VEHICLE TO ROADSIDE) | |
| Transmission and Multiplexing (TM). Digital Radio Relay Systems (DRRS). High capacity DRRS carrying 1x Synchronous Transport Module-level 1 (1xSTM-1) signals operating in the 18 GHz frequency band with channel spacing... | |
| Transmission and multiplexing (TM). High capacity digital radio-relay system carrying 1xShynchronous Transport Module level a (1xSTM-1) operating in the 18 GHz frequency band with channel spacing of 110 MHz. | |
| Unfired pressure vessels - Example of application | |
| Unfired pressure vessels - Part 102: Example of application of vertical vessel with bracket supports | |
| Use of control charts in the production of concrete | |
| Ventilation for hospitals | |
| Ventilation in hospitals - Coherent hierarchic structure and common terms and definitions for a standard related to ventilation in hospitals | |
| Vitrified clay pipe systems for drains and sewers - Guidance for voluntary third-party certification procedures | |
| Waste - Guidance on analysis of eluates | |
| Water quality - Guidance on validation of microbiological methods (ISO/TR 13843:2000) | |
| Water quality - Polymerase chain reaction (PCR) for the detection and quantification of microorganisms and viruses - General requirements, quality assurance and validation (ISO/TS 16099:2025) | |
| Windows, doors, shutters, industrial and garage doors. Burglar resistance. Human intervention. Test method. Part 1: Windows, doors, shutters. | |
| Windows, doors, shutters. Burglar resistance. Requirements and classification. | |
| Windows, doors, shutters. Burglar resistance. Test method for the determination of resistance under dynamic loading. | |
| Windows, doors, shutters. Burglar resistance. Test method for the determination of resistance under static loading. | |
| Wood preservatives - Determination of the effectiveness against soft rotting micro-fungi and other soil inhabiting micro-organisms | |
| Workplace exposure - Assessment of dermal exposure to nano-objects and their aggregates and agglomerates (NOAA) (ISO/TS 21623:2017) | |
| Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 1: Choice of monitor for specific applications | |
| Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters | |
| Workplace exposure - Measurement of chemical agents complying with the requirements given in EN 482 and either one of EN 838, EN 1076, EN 13205, EN 13890 and EN 13936... |
| << Prev | Next >> |