AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| Absorbent incontinence products for urine, faeces, or both - General guidelines on evaluation (ISO 15621:2026) | |
| Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2025, including corrected version... | |
| Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation... | |
| Acoustics - Laboratory measurement of sound insulation of building elements - Part 3: Measurement of impact sound insulation (ISO 10140-3:2010/DAM 3:2013) | |
| Acoustics - Laboratory measurement of sound insulation of building elements - Part 3: Measurement of impact sound insulation - Amendment 2 (ISO 10140-3:2010/DAM 2:2013) | |
| Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment - Amendment 2 (ISO 7779:2001/DAM 2:2006)Acoustics - Measurement of airborne noise emitted by information technology and telecommunications... | |
| Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 1: Statistical Pass-By method (ISO 11819-1:2023) | |
| Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 2: The close-proximity method (ISO 11819-2:2017) | |
| Acoustics - Noise from shooting ranges - Part 2: Calculation of muzzle blast (ISO 17201-2:2025) | |
| Acoustics - Noise from shooting ranges - Part 4: Calculation of projectile sound (ISO 17201-4:2025) | |
| Acoustics - Rating of sound insulation in buildings an dof building elements - Part 2: Impact sound insulation - Amendment 2: Procedure for evaluating the weighted reduction in impact sound... | |
| Acoustics - Reference zero for the calibration of audiometric equipment - Part 3: Reference equivalent threshold vibratory force levels for pure tones and bone vibrators - Amendment 1 (ISO 389-3:2016/DAM... | |
| Agricultural machinery - Robotic feed systems - Safety (ISO 3991:2025) | |
| Agricultural machinery - Safety - Part 20: Grape, olives and coffee harvesters (ISO 4254-20:2025) | |
| Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters, cotton harvesters and sugar cane harvesters - Amendment 1 (ISO 4254-7:2017/DAM 1:2022) | |
| Amendment 1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-4: Particular requirements for lawn trimmers, lawn edge trimmers, grass trimmers, brush... | |
| Anaesthetic and respiratory equipment - Fire-activated oxygen shut-off devices for use during oxygen therapy (ISO 19211:2024) | |
| Anaesthetic and respiratory equipment - Tracheal tubes and connectors - Amendment 1: Reinstatement of third edition S1 dimensions (ISO 5361:2023/DAM 1:2025) | |
| Anaesthetic and respiratory equipment - Vocabulary - Amendment 1 (ISO 4135:2022/DAM 1:2026) | |
| ANGLE PINS. BASIC DIMENSIONS. | |
| Animal and vegetable fats and oils - Determination of melting point in open capillary tubes (slip point) (ISO 6321:2002) | |
| Animal and vegetable fats and oils - Determination of refractive index (ISO 6320:2000) | |
| Animal and vegetable fats and oils - Gas chromatography of fatty acid methyl esters - Part 4: Determination by capillary gas chromatography (ISO 12966-4:2026) | |
| ANIMAL AND VEGETABLE FATS AND OILS. DETERMINATION OF PEROXIDE VALUE (ISO 3690:1998) | |
| Aseptic processing of health care products - Part 2: Sterilizing filtration - Amendment 1 (ISO 13408-2:2018/DAmd1:2 025) | |
| Assistive products for tissue integrity when lying down - Part 1: General requirements - Amendment 1 (ISO 20342-1:2019/DAM 1:2021) | |
| Ball valves for thermoplastics piping systems for hot and cold water installations under pressure - Types, dimensions and requirements (ISO 18984:2025) | |
| Basic human body measurements for technological design - Part 1: Body measurement definitions and landmarks (ISO 7250-1:2017, Corrected version 2025-04) | |
| Biological evaluation of medical devices - Part 17: Toxicological risk assessment of medical device constituents - Amendment 1 (ISO 10993-17:2023/Amd 1:2025) | |
| Biological evaluation of medical devices - Part 1: Evaluation and testing (ISO 10993-1:2003) | |
| Biological evaluation of medical devices - Part 1: Requirements and general principles for the evaluation of biological safety within a risk management process (ISO 10993-1:2025) | |
| Biological evaluation of medical devices - Part 23: Tests for irritation - Amendment 1: Additional in vitro reconstructed human epidermis models (ISO 10993-23:2021/Amd 1:2025) | |
| Building automation and control systems (BACS) - Part 4: Control applications (ISO 16484-4:2025) | |
| Building automation and control systems (BACS) - Part 5: Data communication protocol (ISO 16484-5:2017) | |
| Building automation and control systems (BACS) - Part 6: Data communication conformance testing (ISO 16484-6:2009) | |
| Building automation and control systems - Part 5: Data communication protocol - Amendment 1 (ISO 16484-5:2007/Amd 1:2009) | |
| Building automation and control systems. Part 5: Data communication protocol (ISO 16484-5:2003) | |
| Building information models - Information delivery manual - Part 1: Methodology and format (ISO 29481-1:2025) | |
| Building information models - Information delivery manual - Part 2: Interaction framework (ISO 29481-2:2025) | |
| Carbon dioxide capture, transportation and geological storage - Pipeline transportation systems (ISO 27913:2024, Corrected version 2025-09) | |
| Cardiovascular implants - Endovascular devices - Part 1: Endovascular prostheses (ISO 25539-1:2017) | |
| Cathodic protection of harbour installations (ISO 13174:2012) | |
| Characterization of pavement texture by use of surface profiles - Part 5: Determination of megatexture (ISO 13473-5:2025, Corrected version 2025-06) | |
| Cheese and processed cheese products - Determination of chloride content - Potentiometric titration method (ISO 5943:2004) | |
| Cleanrooms and associated controlled environments - Part 13: Cleaning of surfaces to achieve defined levels of cleanliness in terms of particle and chemical concentration (ISO 14644-13:2026) | |
| Cleanrooms and associated controlled environments - Part 14: Assessment of suitability for use of equipment by airborne particle concentration (ISO 14644-14:2026) | |
| Coffee and coffee products - Determination of acrylamide - Methods using high-performance liquid chromatography with tandem mass spectrometric detection (HPLC-MS/MS) and gas chromatography with mass spectrometric detection (GC-MS) after derivatization... | |
| Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L... | |
| Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining (ISO 22721:2007) | |
| Conveyor belts with a textile carcass - Total belt thickness and thickness of constitutive elements - Test methods (ISO 583:2007) | |
| COPPER ALLOYS. AMMONIA TEST FOR STRESS CORROSION RESISTANCE. | |
| Copper-bearing intra-uterine contraceptive devices - Requirements, tests - Amendment 1 (ISO 7439:2002/FDAmd 1:2009) | |
| Corrosion of metals and alloys - Basic terms and definitions - Amendment 1 (ISO 8044:1999/DAM 1:2012) | |
| Corrosion of metals and alloys - Determination of dezincification resistance of copper alloys with zinc - Part 1: Test method (ISO 6509-1:2014) | |
| Corrosion tests in artificial atmospheres - Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying (ISO 21207:2025) | |
| Cosmetics - Determination of sunscreen UVA photoprotection in vitro - Amendment 1 (ISO 24443:2021/Amd 1:2026) | |
| Dental elevators - Part 3: Cryer elevators (ISO 15087-3:2000) | |
| Dental elevators - Part 4: Coupland elevators (ISO 15087-4:2000) | |
| Dental elevators - Part 5: Bein elevators (ISO 15087-5:2000) | |
| Dental elevators - Part 6: Flohr elevators (ISO 15087-6:2000) | |
| DENTAL ROTARY INSTRUMENTS. SHANKS. PART 1: SHANKS MADE OF METALS (ISO 1797-1:1992, INCLUDING AMENDMENT 1:1997) | |
| Dentistry - Denture adhesives (ISO 10873:2010) | |
| Dentistry - Digitizing devices for CAD/CAM systems for indirect dental restorations - Test methods for assessing accuracy (ISO 12836:2012/DAM 1:2014) | |
| Dentistry - Elastomeric auxiliaries for use in orthodontics - Amendment 1 (ISO 21606:2007/DAM 1:2020) | |
| Dentistry - Evaluation of biocompatibility of medical devices used in dentistry (ISO 7405:2025) | |
| Dentistry - Test methods for rotary instruments - Amendment 1 (ISO 8325:2023/FDAM 1:2026) | |
| Dentistry - Vocabulary - Amendment 1: Definitions for types of tests used in standards development (ISO 1942:2020/DAM 1:2025) | |
| Determination of boron (III) oxide in refractory products - Part 1: Determination of total boron (III) oxide in oxidic materials for ceramics, glass and glazes (ISO 21078-1:2008) | |
| Determination of flash point - Modified continuously closed cup flash point (MCCCFP) method (ISO 24966:2026) | |
| Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2025) | |
| Determination of inrush current characteristics of lighting products | |
| Determination of palladium in palladium jewellery alloys - Gravimetric method with dimethyl glyoxime (ISO 11490:1995) | |
| Determination of platinum in platinum jewellery alloys - Gravimetric method after reduction with mercury(I) chloride (ISO 11489:1995) | |
| Determination of the resistance to cryogenic spillage of insulation materials - Part 1: Liquid phases (ISO 20088-1:2016) | |
| Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1:Pumps (ISO 15136-1:2001). | |
| Dried milk and dried milk products - Determination of fat content - Gravimetric method (Reference method) (ISO 1736:2000) | |
| Electric energy storage (EES) systems - Part 4-2: Guidance on environmental issues - Assessment of the environmental impact of battery failure in an electrochemical based storage system | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-3: Particular requirements for pedestrian controlled walk-behind lawnmowers | |
| Electrical energy storage (EES) systems - Part 3-1: Planning and performance assessment of electrical energy storage systems - General specification | |
| Electrical energy storage (EES) systems - Part 4-3: Protection requirements of battery-based energy storage systems (BESS) according to environmental conditions | |
| Electrically propelled mopeds and motorcycles - Test specifications and safety requirements for lithium-ion battery systems (ISO 18243:2025) | |
| Electronic fee collection - Application interface definition for dedicated short-range communication - Amendment 1 (ISO 14906:2011/Amd 1:2015) | |
| Electronic fee collection - Compliance check communication for autonomous systems - Amendment 1 (ISO 12813:2015/Amd 1:2017) | |
| Electronic fee collection - Localisation augmentation communication for autonomous systems - Amendment 1 (ISO 13141:2015/Amd 1:2017) | |
| Electronic fee collection - System architecture for vehicle-related tolling - Part 3: Data dictionary - Amendment 1 (ISO/DIS 17573-3:2024/DAmd1 :2025) | |
| Electronic Health Record-System Functional Model, Release 1.1 (ISO 10781:2009) | |
| Energy efficiency - Customer energy management systems - Part 1: General requirements and architecture | |
| Energy performance of buildings - Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads - Part 1: Calculation procedures (ISO 52016-1:2017) | |
| Energy performance of buildings - External climatic conditions - Part 1: Conversion of climatic data for energy calculations (ISO 52010-1:2017) | |
| Energy performance of buildings - Indicators for partial EPB requirements related to thermal energy balance and fabric features - Part 1: Overview of options (ISO 52018-1:2017) | |
| Energy performance of buildings - Indicators, requirements, ratings and certificates - Part 1: General aspects and application to the overall energy performance (ISO 52003-1:2017) | |
| Energy performance of buildings - Sensible and latent heat loads and internal temperatures - Part 1: Generic calculation procedures (ISO 52017-1:2017) | |
| Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 1: Simplified calculation method of the solar and daylight characteristics for solar protection... | |
| Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 3: Detailed calculation method of the solar and daylight characteristics for solar protection... | |
| Environmental labels and declarations - Type I environmental labelling - Principles and procedures - Amendment 1 (ISO 14024:1999/DAM 1:2015) | |
| Environmental management - Life cycle assessment - Critical review processes and reviewer competencies (ISO 14071:2024) | |
| Environmental management - Vocabulary - Amendment 1 (ISO 14050:2020/DAM 1:2022) | |
| Environmental management systems - Requirements with guidance for use - Amendment 2 (ISO 14001:2015/DAM 2:2025) | |
| Ergonomic design of control centres - Part 4: Layout and dimensions of workstations (ISO 11064-4:2013) | |
| Ergonomic design of control centres - Part 5: Displays and controls (ISO 11064-5:2008) | |
| Ergonomics - 3-D scanning methodologies for internationally compatible anthropometric databases - Part 2: Evaluation protocol of surface shape and repeatability of relative landmark positions (ISO 20685-2:2015) | |
| Ergonomics - Accessible design - Sound pressure levels of spoken announcements for products and public address systems (ISO 24504:2014) | |
| Ergonomics - General approach, principles and concepts (ISO 26800:2011) | |
| Ergonomics of the thermal environment - Assessment of heat stress using the WBGT (wet bulb globe temperature) index (ISO 7243:2017) | |
| Ergonomics principles in the design of work systems (ISO 6385:2016) | |
| EVAPORATED MILK AND SWEETENED CONDENSED MILK. DETERMINATION OF FAT CONTENT. GRAVIMETRIC METHOD (REFERENCE METHOD) (ISO 1737:1999) | |
| EXTRUDED SHEETS OF IMPACT-MODIFIED POLYESTYRENE (PS-1) MOULDING MATERIALS - REQUIREMENTS AND TEST METHODS (ISO/DIS 14631:1995) | |
| Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for general use (ISO 12312-1:2013) | |
| Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for general use (ISO 12312-1:2013/Amd 1:2015) | |
| Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for general use - Amendment 1 (ISO 12312-1:2022/FDAM 1:2026) | |
| Eye and face protection - Sunglasses and related eyewear - Part 2: Filters for direct observation of the sun (ISO 12312-2:2015) | |
| Eye and face protection for occupational use - Part 3: Additional requirements for mesh protectors - Amendment 1 (ISO 16321-3:2021/FDAM 1:2025) | |
| Fans - Efficiency classification for fans - Part 4: Driven fans at maximum operating speed - Amendment 1: Addition of Annex F providing an example of the use of efficiency... | |
| Fasteners - Electroplated coating systems - Amendment 1 (ISO 4042:2022/Amd 1:2026) | |
| Fasteners - Hexagon socket countersunk head screws with reduced loadability (ISO 10642:2026) | |
| Fasteners - Hexagon socket set screws with cup point (ISO 4029:2026) | |
| Fasteners - Hexagon socket set screws with dog point (ISO 4028:2026) | |
| Fasteners - Hexagon socket set screws with flat point (ISO 4026:2026) | |
| Fasteners - Hexagon socket set screws with truncated cone point (ISO 4027:2026) | |
| Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 7: Flat washers with specified grades and property classes (ISO 3506-7:2024) | |
| Fertilizers and liming materials - Sampling and sample preparation - Part 1: Sampling (ISO 14820-1:2016) | |
| Fertilizers and liming materials - Sampling and sample preparation - Part 2: Sample preparation (ISO 14820-2:2016) | |
| Flame arresters - Performance requirements, test methods and limits for use (ISO 16852:2008, including Cor 1:2008 and Cor 2:2009) | |
| Flexible and rigid cellular polymeric materials - Accelerated ageing tests (ISO 2440:2025) | |
| Flow-metering devices for connection to terminal units of medical gas pipeline systems - Amendment 2 (ISO 15002:2008/DAM 2:2020) | |
| Fluid fertilizers - Preliminary visual examination and preparation of samples for physical testing (ISO 10249:2026) | |
| Fluids for electrotechnical application - Specification of gases alternative to SF6 to be used in electrical power equipment | |
| Fluids for electrotechnical application: Specifications for the re-use of mixtures of gases alternative to sf6 | |
| Foot and leg protectors - Requirements and test methods for footwear components - Part 1: Metallic toecaps - Amendment 1 (ISO 22568-1:2019/Amd 1:2025) | |
| Foot and leg protectors - Requirements and test methods for footwear components - Part 2: Non-metallic toecaps - Amendment 1 (ISO 22568-2:2019/Amd 1:2025) | |
| Forensic sciences - Part 1: Vocabulary (ISO 21043-1:2025) | |
| Forensic sciences - Part 3: Analysis (ISO 21043-3:2025) | |
| Forensic sciences - Part 4: Interpretation (ISO 21043-4:2025) | |
| Forensic sciences - Part 5: Reporting (ISO 21043-5:2025) | |
| Forestry machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2005, corrected version 2005-06-01) | |
| Foundry machinery - Safety requirements for high pressure die casting machines (ISO 23063:2024) | |
| Freight containers - Coding, identification and marking - Amendment 4 (ISO 6346:1995/DAM 4:2020) | |
| Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2025) | |
| Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers - Amendment 1: Correction of formula C.4 (ISO 6145-7:2018/DAM 1:2025) | |
| Gas cylinders - Cylinder valves - Manufacturing tests and examinations - Amendment 1 (ISO 14246:2022/Amd 1:2025) | |
| Gas cylinders - Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets - Amendment 1 (ISO 10156:2017/DAM 1:2026) | |
| Gas cylinders - Non-refillable metallic gas cylinders - Specification and test methods (ISO 11118:2015/DAM 1:2017) | |
| Gas cylinders - Quick-release cylinder valves - Specification and type testing - Amendment 2 (ISO 17871:2020/DAM 2:2026) | |
| Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing - Amendment 1 (ISO 14245:2021/Amd 1:2025) | |
| Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing - Amendment 1 (ISO 14245:2021/FDAM 1:2024) | |
| Gas cylinders - Valve protection caps and guards - Design, construction and tests - Amendment 1 (ISO 11117:2019/DAM 1:2026) | |
| Gas cylinders - Vocabulary (ISO 10286:2025) | |
| General methods of test for pigments and extenders - Part 5: Determination of oil absorption value (ISO 787-5:2026) | |
| Geographic information - Classification systems - Part 1: Classification system structure (ISO 19144-1:2009) | |
| Geographic information - General feature model and rules for application schema (ISO 19109:2025) | |
| Geographic information - Geography Markup Language (GML) (ISO 19136:2007) | |
| Geographic information - Geospatial application programming interface (API) for tiles - Part 1: Core (ISO 19177-1:2026) | |
| Geographic information - Land Administration Domain Model (LADM) - Part 2: Land registration (ISO 19152-2:2025) | |
| Geographic information - Land Administration Domain Model (LADM) - Part 4: Valuation information (ISO 19152-4:2025) | |
| Geographic information - Land Administration Domain Model (LADM) - Part 5: Spatial plan information (ISO 19152-5:2025) | |
| Geographic information - Registration and register governance (ISO 19135:2026) | |
| Geographic information - Simple feature access - Part 1: Common architecture (ISO 19125-1:2004) | |
| Geographic information - Simple feature access - Part 2: SQL option (ISO 19125-2:2004) | |
| Geographic information - Spatial schema (ISO 19107:2003) | |
| Geographic information. Methodology for feature cataloguing . Amendment 1 (ISO 19110:2005/DAM 1:2009) | |
| Geometrical Product Specification (GPS) - Filtration - Part 60: Linear areal filters: Basic concepts (ISO 16610-60:2015) | |
| Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014) | |
| Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 12: Articulated arm coordinate measurement machines (CMM) (ISO 10360-12:2016) | |
| Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 9: CMMs with multiple probing systems (ISO 10360-9:2013) | |
| Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011) | |
| Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015) | |
| Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2010/DAM 1:2013) | |
| Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2025) | |
| Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes - Amendment 1 (ISO 14405-2:2011/DAM 1:2017) | |
| Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016) | |
| Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2009/DAM 1:2014) | |
| Geometrical product specifications (GPS) - Features utilized in specification and verification (ISO 22432:2011) | |
| Geometrical product specifications (GPS) - Filtration - Part 1: Overview and basic concepts (ISO 16610-1:2015) | |
| Geometrical product specifications (GPS) - Filtration - Part 20: Linear profile filters: Basic concepts (ISO 16610-20:2015) | |
| Geometrical product specifications (GPS) - Filtration - Part 71: Robust areal filters: Gaussian regression filters (ISO 16610-71:2014) | |
| Geometrical product specifications (GPS) - Filtration- Part 85: Morphological areal filters: Segmentation (ISO 16610-85:2013) | |
| Geometrical Product Specifications (GPS) - Geometrical features - Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature (ISO 14660-2:1999/DAM... | |
| Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems - Amendment 1 (ISO 5459:2011/DAM 1:2022) | |
| Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017) | |
| Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2012, including Cor 1:2013) | |
| Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2012/DAM 1:2013) | |
| Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017) | |
| Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation - Amendment 2: Indication of material ratio requirements (ISO 1302:2002/DAM 2:2010) | |
| Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformance or non-conformance with specifications (ISO 14253-1:1998/DAM 1:2012) | |
| Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015) | |
| Geometrical product specifications (GPS) - Population specification (ISO 18391:2016) | |
| Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties (ISO 1:2016) | |
| Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013) | |
| Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2013) | |
| Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014) | |
| Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-71:2012) | |
| Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters - Amendment 2 (ISO 4287:1997/DAM 2:2013) | |
| Geometrical product specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2012) | |
| Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards - Amendment 1 (ISO 5436-2:2001/DAM 1:2010) | |
| Geosynthetics - Part 1: Vocabulary (ISO 10318-1:2026) | |
| Geotechnical investigation and testing - Field testing - Part 1: Electrical cone and piezocone penetration test - Amendment 1 (ISO 22476 1:2022/DAM 1:2026) | |
| Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 7: Measurement of strains: Strain gauges (ISO 18674-7:2025) | |
| Geotechnical investigation and testing - Testing of geotechnical structures - Part 6: Load testing of soil nails and rock bolts (ISO 22477-6:2026) | |
| Geotextiles and geotextile-related products - Determination of the characteristic opening size - Amendment 1 (ISO 12956:1999/DAM 1:2007) | |
| Geotextiles and geotextile-related products - Determination of water flow capacity in their plane (ISO 12958:1999/DAM 1:2007) | |
| Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, without load (ISO 11058:1999/DAM 1:2007) | |
| Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO 7010:2011) | |
| Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO 7010:2011/Amd 1:2012) | |
| Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO 7010:2011/Amd 2:2012) | |
| Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO 7010:2011/Amd 3:2012) | |
| Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO 7010:2011/Amd 4:2013) | |
| Graphical symbols - Safety colours and safety signs - Registered safety signs - Amendment 5 (ISO 7010:2011/Amd 5:2014) | |
| Graphical symbols - Safety colours and safety signs - Registered safety signs - Amendment 6 (ISO 7010:2011/Amd 6:2014) | |
| Graphical symbols - Safety colours and safety signs - Registered safety signs - Amendment 7 (ISO 7010:2011/Amd 7:2016) | |
| Greenhouse gases - Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals - Amendment 1 (ISO 14064 1:2018/DAM 1:2024) | |
| Greenhouse gases - Quantification and reporting of greenhouse gas emissions arising from transport chain operations (ISO 14083:2023) | |
| Guidance and recommendations on design, selection and installation of vents to safeguard the structural integrity of enclosures protected by gaseous fire-extinguishing systems - Amendment 1 (ISO 21805:2023/Amd 1:2025) | |
| Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (ISO 11148-3:2010) | |
| Hand-held non-electric power tools - Safety requirements - Part 4: Nonrotary percussive power tools (ISO 11148-4:2010) | |
| Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2010) | |
| Hardmetals - Determination of (the magnetization) coercivity (ISO 3326:2013) | |
| Hardmetals - Palmqvist toughness test (ISO 28079:2026) | |
| Health informatics - Categorial structure for terminological systems of human anatomy (ISO 16278:2016) | |
| Health informatics - Device interoperability - Part 10101: Point-of-care medical device communication - Nomenclature - Amendment 1: Additional definitions (ISO/IEEE 11073-10101/FDAM 1:2026) | |
| Health informatics - Digital imaging and communication in medicine (DICOM) including workflow and data management (ISO 12052:2026) | |
| Health informatics - Functional and structural roles (ISO 21298:2017, Corrected version 2017-04) | |
| Health informatics - Information security controls in health based on ISO/IEC 27002 (ISO 27799:2025) | |
| Health informatics - International patient summary (ISO 27269:2025) | |
| Health informatics - Personal health device communication - Part 20601: Application profile - Optimized exchange protocol - Amendment 1 (ISO/IEEE 11073-20601:2010/Amd 1:2015) | |
| Health informatics - Point-of-care medical device communication - Part 10101: Nomenclature (ISO/IEEE 11073-10101:2004) | |
| Health informatics - Point-of-care medical device communication - Part 10201: Domain information model (ISO/IEEE 11073-10201:2004) | |
| Health informatics - Point-of-care medical device communication - Part 20101: Application profiles - Base standard (ISO/IEEE 11073-20101:2004) | |
| Health informatics - Point-of-care medical device communication - Part 30200: Transport profile - Cable connected (ISO/IEEE 11073-30200:2004) | |
| Health informatics - Point-of-care medical device communication - Part 30200: Transport profile - Cable connected - Amendment 1 (ISO/IEEE 11073-30200:2004/Amd 1:2015) | |
| Health informatics - Point-of-care medical device communication - Part 30300: Transport profile - Infrared wireless (ISO/IEEE 11073-30300:2004) | |
| Health informatics - Requirements for international machine-readable coding of medicinal product package identifiers (ISO 16791:2026) | |
| Home and building electronic systems (HBES) and building automation and control systems (BACS) - Part 4: General functional safety requirements for products intended to be integrated in HBES and BACS... | |
| Household electric appliances - Specification of the properties of a digital system for measuring the performance | |
| Human response to vibration - Measuring instrumentation - Amendment 1 (ISO 8041:2005/DAM 1:2015) | |
| Hydrocarbon Liquids - Manual Sampling (ISO 3170:2025) | |
| Hydrogen generators using water electrolysis - Part 1: Safety (ISO 22734-1:2025) | |
| Hydrogen in energy systems - Vocabulary (ISO 24078:2025) | |
| Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016) | |
| Implants for surgery - Metallic materials - Part 2: Unalloyed titanium (ISO 5832-2:2025) | |
| Industrial fans - Mechanical safety of fans - Guarding (ISO 12499:1999/DAM 1:2010) | |
| Industrial sewing machines - Safety requirements for sewing machines, units and systems (ISO 10821:2005) | |
| Industrial sewing machines - Safety requirements for sewing machines, units and systems - Amendment 1 (ISO 10821:2005/Amd 1:2009, Corrected version 2009-08-01) | |
| Industrial trucks - Safety requirements and verification - Part 2: Self-propelled variable-reach trucks - Amendment 2 (ISO 3691-2:2016/DAM 2:2019) | |
| Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel carriers - Amendment 1 (ISO 3691-6:2013/DAM 1:2020) | |
| Industrial valves - Gearboxes for valves (ISO 22109:2026) | |
| Industrial valves - Multi-turn actuator attachments (ISO 5210:2026) | |
| Industrial valves - Multi-turn valve actuator attachments - Amendment 1 (ISO 5210:2017/DAM 1:2022) | |
| Industrial valves - Part-turn actuator attachments (ISO 5211:2026) | |
| Industrial valves - Part-turn actuator attachments - Amendment 1 (ISO 5211:2017/DAM 1:2022) | |
| Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries (ISO 16739:2013) | |
| INFORMATION TECHNOLOGY. OFFICE EQUIPMENT.MINIMUM INFORMATION TO BE INCLUDED IN SPECIFICATION SHEETS. COPYING MACHINES (ISO/IEC 11159:1996) | |
| Innovation management - Tools and methods for innovation operation measurements - Guidance (ISO 56008:2024) | |
| Intelligent transport systems - Graphic data dictionary (ISO 14823:2017) | |
| Intelligent transport systems - Traffic and travel information messages via traffic message coding - Part 2: Event and information codes for Radio Data System-Traffic Message Channel (RDS-TMC) using ALERT-C -... | |
| ISO system of limits and fits - Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts - Amendment 1 (ISO 286 2:1993/DAM 1:2008) | |
| Jewellery - Determination of palladium in palladium jewellery alloys - Gravimetric determination with dimethylglyoxime (ISO 11490:2015) | |
| Jewellery - Determination of palladium in palladium jewellery alloys - ICP-OES method using yttrium as internal standard element (ISO 11495:2014) | |
| Jewellery - Determination of platinum in platinum jewellery alloys - Gravimetric method after precipitation of diammonium hexachloroplatinate (ISO 11210:2014) | |
| Lasers and laser-related equipment - Determination of laser resistance of tracheal tubes - Part 2: Tracheal tube cuffs (ISO 11990-2:2010) | |
| Leather - Determination of water resistance of flexible leather - Part 1: Repeated linear compression (penetrometer) (ISO 5403-1:2025) | |
| Leather - Physical and mechanical tests - Determination of heat resistance of patent leather (ISO 17232:2025) | |
| Leather - Tests for colour fastness - Colour fastness to water (ISO 11642:2025) | |
| Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 2: Pipe provers (ISO 7278-2:1988) | |
| LIQUID HYDROCARBONS. DYNAMIC MEASUREMENT. PROVING SYSTEMS FOR VOLUMETRIC METERS. PART 1: GENERAL PRINCIPLES. (ISO 7278-1:1987) | |
| Machine tools - Safety - Stationary grinding machines (ISO 16089:2015) | |
| Machine tools - Safety - Stationary grinding machines - Amendment 1 (ISO 16089:2015/DAM 1:2020) | |
| MANIPULATING INDUSTRIAL ROBOTS. AUTOMATIC END EFFECTOR EXCHANGE SYSTEMS. VOCABULARY AND PRESENTATION OF CHARACTERISTICS (ISO 11593:1996) | |
| Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method | |
| Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-worn wireless communication devices - Human models, instrumentation and procedures (Frequency... | |
| Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 3: Isolated and repeated shocks using the frequency range of ISO 5349-1 (ISO 5349-3:2025) | |
| Mechanism for financing local adaptation to climate change - Performance-based climate resilience grants - Requirements and guidelines (ISO 14093:2022) | |
| Medical devices - Information to be supplied by the manufacturer (ISO 20417:2026) | |
| Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 13485:2016) | |
| Medical devices - Sleep apnoea breathing therapy - Masks and application accessories (ISO 17510:2025) | |
| Medical devices - Symbols to be used with medical device labels, labelling and information to be supplied - Part 1: General requirements (ISO 15223-1:2016, including corrected version 2017-03) | |
| Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation - Amendment 1 (ISO 80601-2-13:2022/FDAM 1:2026) | |
| Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment | |
| Medical electrical equipment - Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients (ISO 80601-2-72:2015) | |
| Medical laboratories - Application of risk management to medical laboratories (ISO 22637:2026) | |
| Medical laboratories - Particular requirements for quality and competence - Amendment 1 (ISO 15189:2003/DAM 1:2005). | |
| Medical suction equipment - Part 1: Electrically powered suction equipment - Amendment 1: Ingress of water (ISO 10079-1:2022/Amd 1:2026) | |
| Metallic and other inorganic coatings - Electroplated coatings on iron and steel using zinc treated with solutions containing chromium (VI) (ISO 2081:2025) | |
| Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 5: Linear elastic dynamic instrumented indentation testing (DIIT) (ISO 14577-5:2022) | |
| Metallic materials - Tensile testing at high strain rates - Part 1: Elastic-bar-type systems (ISO 26203-1:2025) | |
| Methods of measurement and declaration of the detection range of detectors - Passive infrared detectors for major and minor motion detection | |
| Microbiology - General guidance for the enumeration of Bacillus cereus - Colony-count techinique at 30 degreees C - Amendment 1: Incursion of precision data and limitation of conformatory tests | |
| Microbiology of the food chain - Detection and enumeration of Cryptosporidium and Giardia in fresh leafy green vegetables and berry fruits - Amendment 1: Method validation studies and performance characteristics... | |
| Microbiology of the food chain - Determination and use of cardinal values (ISO 23691:2026) | |
| Microbiology of the food chain - Horizontal method for the detection and enumeration of Listeria monocytogenes and of Listeria spp. - Part 1: Detection method - Amendment 1: Inclusion of... | |
| Microbiology of the food chain - Horizontal method for the detection and enumeration of Listeria monocytogenes and of Listeria spp. - Part 2: Enumeration method - Amendment 1: Inclusion of... | |
| Microbiology of the food chain - Loop-mediated isothermal amplification (LAMP) for the detection of microorganisms and associated genetic markers - General requirements and definitions (ISO 24914:2026) | |
| Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory - Amendment 1: Protocol... | |
| Microbiology of the food chain - Method validation - Part 4: Protocol for method validation in a single laboratory - Amendment 2: Protocol for single-laboratory validation of identification methods of... | |
| MILK AND MILK POWDER. DETERMINATION OF AFLATOXIN M1 CONTENT - CLEAN UP BY IMMUNOAFFINITY CHROMATOGRAPHY AND DETERMINATION BY HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (ISO 14501:1998) | |
| Milk products - Enumeration of bifidobacteria - Colony-count technique (ISO 29981:2024) | |
| Milk, milk products, infant formula and adult nutritionals - Determination of fatty acids composition - Capillary gas chromatographic method (ISO 16958:2026) | |
| Mining - Air quality control systems for operator enclosures - Performance requirements and test methods - Amendment 1 (ISO 23875:2021/Amd 1:2022) | |
| Molecular in vitro diagnostic examinations - Requirements and recommendations for pre-examination processes for urine and other body fluids - Isolated cell-free DNA (ISO 18704:2026) | |
| Monitoring and measuring systems used for data collection, aggregation and analysis - Part 1: Device requirements | |
| Multi-channel radio-frequency connectors - Part 4: Sectional specification for type L32-4 and L32-5 circular connectors | |
| Natural gas - Calculation of methane number of gaseous fuels for reciprocating internal combustion engines - Part 1: MNc method (ISO 17507-1:2025) | |
| Natural gas - Calculation of methane number of gaseous fuels for reciprocating internal combustion engines - Part 2: PKI method (ISO 17507-2:2025) | |
| Natural gas fuelling stations - Compressed natural gas (CNG) stations for fuelling vehicles (ISO 16923:2026) | |
| Natural gas fuelling stations - Liquefied natural gas (LNG) stations for fuelling road vehicles (ISO 16924:2026) | |
| Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems - Amendment 1 (ISO 11608-1:2022/DAmd1:2 025) | |
| Needle-based injection systems for medical use - Requirements and test methods - Part 3: Containers and integrated fluid paths - Amendment 1 (ISO 11608-3:2022/DAmd1:2 025) | |
| Non-destructive testing - Acoustic emission testing - Specific methodology and general evaluation criteria for testing of fibre-reinforced polymers (ISO 18249:2015) | |
| Non-destructive testing - Characteristics of focal spots in industrial X-ray systems - Part 2: Edge method with hole or disk type test objects (ISO 32543-2:2026) | |
| Non-destructive testing - Characteristics of focal spots in industrial X-ray systems - Part 3: Measurement of the effective focal spot size of mini and micro focus X-ray tubes (ISO 32543-3:2026)... | |
| Non-destructive testing - Equipment for eddy current examination - Part 1: Instrument characteristics and verification (ISO 15548-1:2026) | |
| Non-destructive testing - Evaluation of vision acuity of NDT personnel (ISO 18490:2026) | |
| Non-destructive testing - Radiation methods for computed tomography - Part 3: Operation and interpretation (ISO 15708-3:2025) | |
| Non-destructive testing - Radiation methods for computed tomography - Part 4: Qualification (ISO 15708-4:2025) | |
| Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities (ISO 16827:2025) | |
| Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction technique for detection and sizing of discontinuities (ISO 16828:2025) | |
| Non-destructive testing - Ultrasonic thickness determination (ISO 16809:2025) | |
| Numerical welding simulation - Execution and documentation (ISO 18166:2026) | |
| Off grid and unreliable grid refrigerating appliances for domestic and light commercial use - Characteristics and test methods - Performance requirements and energy consumption | |
| Oil and gas industries including lower carbon energy - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 2: Single layer fusion-bonded epoxy coatings (ISO... | |
| Ophthalmic implants - Intraocular lenses - Part 1: Vocabulary (ISO 11979-1:2026) | |
| Ophthalmic implants - Intraocular lenses - Part 4: Labelling and information (ISO 11979-4:2026) | |
| Ophthalmic optics - Contact lenses - Determination of shelf-life (ISO 11987:2026) | |
| Ophthalmic optics - Contact lenses - Part 2: Tolerances - Amendment 1 (ISO 18369-2:2006/DAM 1:2009) | |
| Ophthalmic optics - Contact lenses and contact lens care products - Determination of preservative uptake and release (ISO 11986:2026) | |
| Ophthalmic optics - Contact lenses and contact lens care products - Requirements and guidance for clinical investigations (ISO 11980:2025) | |
| Ophthalmic optics - Spectacle frames - Requirements and test methods (ISO 12870:2024) | |
| Ophthalmic optics - Spectacle lenses - Vocabulary - Amendment 1 (ISO 13666:1998/DAM 1:2009) | |
| Organic light emitting diode (OLED) light sources for general lighting - Safety - Part 2-3: Particular requirements - Flexible OLED tiles and panels | |
| Performance evaluation methods of robots for household and similar use | |
| Personal protective equipment - Eye and face protection - Vocabulary (ISO 4007:2012) | |
| Personal protective equipment - Footwear protecting against risks in foundries and welding - Part 1: Requirements and test methods for protection against risks in foundries (ISO 20349-1:2017) | |
| Personal protective equipment - Footwear protecting against risks in foundries and welding - Part 2: Requirements and test methods for protection against risks in welding and allied processes (ISO 20349-2:2017)... | |
| Personal protective equipment - Test methods for sunglasses and related eyewear (ISO 12311:2013, Corrected version 2014-08-15) | |
| PETROLEUM AND LIQUID PETROLEUM PRODUCTS. CALCULATION OF OIL QUANTITIES. PART 2: DYNAMIC MEASUREMENTS. (ISO 4267-2:1988) | |
| Petroleum and natural gas industries - Aluminium alloy drill pipe (ISO 15546:2007) | |
| PETROLEUM AND NATURAL GAS INDUSTRIES - ALUMINIUM ALLOY DRILL PIPES | |
| PETROLEUM AND NATURAL GAS INDUSTRIES - CEMENTS AND MATERIALS FOR WELL CEMENTING - PART 1: SPECIFICATION (ISO 10426-1:2000). | |
| Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubular products for use as casing, tubing, coupling stock and accessory material - Technical delivery conditions - Amendment 1 (ISO 13680:2020/DAM... | |
| Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings (ISO 13625:2002) | |
| Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment ( ISO 10423:2001) | |
| Petroleum and natural gas industries - Offshore production installations - Guidelines on tools and techniques for hazard identification and risk assessment (ISO 17776:2000) | |
| Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO/DIS 11960:2003) | |
| Petroleum and natural gas industries- Cements and materials for well cementing- Part 1: Specification (ISO 10426-1/AMD 1:2002) | |
| PETROLEUM AND NATURAL GAS INDUSTRIES. DRILLING FLUID MATERIALS. SPECIFICATIONS AND TESTS (ISO 13500:1998) | |
| Petroleum and natural gas industries. General requirements for offshore structures (ISO/DIS 19900:2001) | |
| PETROLEUM AND NATURAL GAS INDUSTRIES. PACKAGED, INTEGRALLY GEARED CENTRIFUGAL AIR COMPRESSORS FOR GENERAL REFINERY SERVICE (ISO/DIS 10442:1996) | |
| Petroleum and natural gas industries. Plate heat exchangers (ISO 15547:2000) | |
| PETROLEUM LIQUIDS AND GASES. FIDELITY AND SECURITY OF DYNAMIC MEASUREMENTS. CABLED TRANSMISSION OF ELECTRIC AND/OR ELECTRONIC PULSED DATA. (ISO 6551:1982). | |
| Petroleum measurement systems - Part 2: Pipe prover design, calibration and operation - Amendment 1 (ISO 7278-2:2022/FDAM 1:2026) | |
| PETROLEUM MEASUREMENT SYSTEMS. CALIBRATION. TEMPERATURE CORRECTIONS FOR USE WITH VOLUMETRIC REFERENCE MEASURING SYSTEMS. (ISO 8222:1987). | |
| Photovoltaic power generating systems connection with the grid - Testing of power conversion equipment - Part 3: Basic operations | |
| Pigments and extenders - Dispersion procedure for sedimentation-based particle sizing of suspended pigment or extender with liquid sedimentation methods (ISO 20427:2026) | |
| Piping systems for rehabilitation of underground drains, sewers and water supply networks - Part 1: Polyethylene (PE) material (ISO 11300-1:2026) | |
| Piping systems for rehabilitation of underground drains, sewers and water supply networks - Part 3: Unplasticized poly (vinyl chloride) (PVC-U) material (ISO 11300-3:2026) | |
| Plain washers - Extra large series - Product grade C (ISO 7094:2000) | |
| Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2026) | |
| Plastics - Determination of dynamic mechanical properties - Part 1: General principles - Amendment 1 (ISO 6721-1:2002/DAM 1:2008) | |
| Plastics - Extruded sheets of impact-modified acrylonitrile-styren e copolymers (ABS, AEPDS and ASA) - Requirements and test methods (ISO 15015:2025) | |
| Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2026) | |
| Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method (ISO 1183-2:2026) | |
| Plastics - Smoke generation - Determination of optical density by a single-chamber test (ISO 5659:2026) | |
| Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics - Amendment 1: Symbol for recycled plastics material (ISO 1043-1:2001/DAM 1:2008) | |
| Plastics - Symbols and abbreviated terms - Part 4: Flame retardants - Amendment 1: New code numbers for flame retardants (ISO 1043-4:2021/Amd 1:2026) | |
| Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content (ISO 1158:2026) | |
| Plastics hoses - Helical-thermoplasti c-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:2026) | |
| Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 1 (ISO 15874-3:2003/DAM 1:2006) | |
| Plastics piping systems for hot and cold water installations. Polypropylene (PP). Part 3: Fittings - Amendment 1 (ISO 15874-3:2009) | |
| Plastics piping systems used for the rehabilitation of pipelines - Classification and overview of strategic, tactical and operational activities (ISO 11295:2026) | |
| PNE-EN ISO 3952 | |
| Polymeric materials, cellular flexible - Determination of stress-strain characteristics in compression - Part 1: Low-density materials (ISO 3386-1:2025) | |
| Power transformers - Part 57-1202: Liquid immersed phase-shifting transformers | |
| Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 7: High chromium white cast iron grit (ISO 11124-7:2025) | |
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garnet (ISO 11126-10:2025) | |
| Prosthetics - Structural testing of lower-limb prostheses - Requirements and test methods (ISO 10328:2006/FDAM 1:2013) | |
| Prosthetics - Testing of ankle-foot devices and foot units - Requirements and test methods (ISO 22675:2006/FDAM 1:2015) | |
| Protective clothing - General requirements (ISO 13688:2013) | |
| Protective clothing - Protection against flame - Limited flame spread materials, material assemblies and clothing (ISO 14116:2015) | |
| Protective clothing - Protection against flame - Method of test for limited flame spread (ISO 15025:2016) | |
| Protective clothing against heat and flame - Part 1: Test method for complete garments - Measurement of transferred energy using an instrumented manikin (ISO 13506-1:2017) | |
| Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks (ISO 374-1:2016) | |
| Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements for micro-organisms risks (ISO 374-5:2016) | |
| Public transport - Interoperable fare management system - Part 1: Architecture (ISO 24014-1:2007) | |
| Quality management - Requirements for measurement management systems (ISO 10012:2026) | |
| Railway applications - Braking - General vocabulary - Amendment 1 (ISO 24478:2023/DAM 1:2025) | |
| Railway applications - Heating, ventilation and air conditioning systems for rolling stock - Part 4: Design parameters, and test and inspection items for the HVAC unit (ISO 19659-4:2026) | |
| Railway infrastructure - Rail fastening systems - Part 4: Test methods for resistance to repeated loading - Amendment 1 (ISO 22074-4:2022/Amd 1:2026) | |
| Rare earth - Determination of non-rare earth impurities in individual rare earth metals and their oxides - ICP-AES - Part 1: Analysis of Al, Ca, Mg, Fe and Si (ISO... | |
| Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test (ISO 11925-2:2026) | |
| Refractory test-piece preparation - Gunning refractory panels by the pneumatic-nozzle mixing type guns (ISO 20182:2008) | |
| REFRIGERATED LIGHT HYDROCARBON FLUIDS. CALIBRATION OF MEMBRANE TANKS AND INDEPENDENT PRISMATIC. TANKS IN SHIPS. PHYSICAL MEASUREMENT. (ISO 8311:1989) | |
| Refrigerating systems and heat pumps - Qualification of tightness of components and joints - Amendment 1 (ISO 14903:2017/DAM 1:2022) | |
| Resilient floor coverings - Determination of dimensional stability and curling (vertical deformation) after exposure to heat (ISO 23999:2025) | |
| Road transport and traffic telematics - Automatic vehicle and equipment identification - Reference architecture and terminology (ISO 14814:2006) | |
| Road vehicles - Vehicle to grid communication interface - Part 20: 2nd generation network layer and application layer requirements - Amendment 1: AC DER service, MCS service, and improved security... | |
| Road vehicles - Vehicle to grid Communication interface - Part 3: Physical and data link layer requirements (ISO 15118-3:2015) | |
| Road vehicles - Vehicle-to-grid communication Interface - Part 2: Network and application protocol requirements (ISO 15118-2:2014) | |
| Robotics - Safety requirements - Part 1: Industrial robots (ISO 10218-1:2025) | |
| Robots for industrial environments - Safety requirements - Part 1: Robot (ISO 10218-1:2006) | |
| Robots for industrial environments - Safety requirements - Part 1: Robot (ISO 10218-1:2006, including Cor 1:2007) | |
| Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification (ISO 1825:2026) | |
| Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification (ISO 28017:2026) | |
| Safety of machinery - Laser processing machines - Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade... | |
| Security and resilience - Crisis management - Guidelines (ISO 22361:2022) | |
| Security and resilience - Emergency management - Guidelines for colour-coded alert (ISO 22324:2022) | |
| Security and resilience - Emergency management - Guidelines for public warning (ISO 22322:2022) | |
| Security and resilience - Emergency management - Guidelines for the use of social media in emergencies (ISO 22329:2021) | |
| Security and resilience - Vocabulary (ISO 22300:2021) | |
| Sensory analysis - Methodology - Paired comparison test (ISO 5495:2005/Amd 1:2016) | |
| Sharps injury protection - Sharps protection mechanisms for single-use needles, introducers for catheters and needles used for blood testing, monitoring, sampling and medical substance administration - Requirements and test methods... | |
| Simultaneous interpreting - Interpreters’ working environment - Part 3: Requirements and recommendations for interpreting hubs (ISO 17651-3:2026) | |
| Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength (ISO 3325:2026) | |
| Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity (ISO 2738:2026) | |
| Sintered metal materials, excluding hardmetals. Tensile test pieces (ISO 2740:1999) | |
| Small craft - Craft identification - Coding system - Amendment 1 (ISO 10087:2022/DAM 1:2025) | |
| Small craft - Windows, portlights, hatches, deadlights and doors - Strength and watertightness requirements | |
| Small-bore connectors for liquids and gases in healthcare applications - Part 3: Connectors for enteral applications - Amendment 1 (ISO 80369-3:2016/DAmd 1:2017) | |
| Small-bore connectors for liquids and gases in healthcare applications - Part 3: Connectors for enteral applications - Amendment 2 (ISO 80369-3:2016/DAmd 2:2017) | |
| Snow throwers - Safety requirements and test procedures - Part 1: Terminology and common tests - Amendment 1: Scope clarification (ISO 8437-1:2019/DAM 1:2022) | |
| Snow throwers - Safety requirements and test procedures - Part 2: Pedestrian-controlle d snow throwers - Amendment 1 (ISO 8437-2:2019/DAM 1:2022) | |
| Snow throwers - Safety requirements and test procedures - Part 3: Ride-on snow throwers - Amendment 1 (ISO 8437-3:2019/DAM 1:2022) | |
| Snow throwers - Safety requirements and test procedures - Part 4: Additional national and regional requirements - Amendment 1 (ISO 8437-4:2019/DAM 1:2022) | |
| Soil quality - Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography (ISO 16703:2004) | |
| Soil Quality - Determination of dehydrogenase activity in soil - Part 1: Method using triphenyltetrazolium chloride (TTC) (ISO 23753-1:2005) | |
| Soil Quality - Determination of dehydrogenase activity in soils - Part 2: Method using iodotetrazolium chloride (INT) (ISO 23753-2:2005) | |
| Soil quality - Determination of effective cation exchange capacity (CEC) and exchangeable cations using a hexamminecobalt trichloride solution (ISO 23470:2007) | |
| Soil quality - Determination of selected organotin compounds - Gas-chromatographic method (ISO 23161:2009) | |
| Soil quality - Effects of pollutants on juvenile land snails (Helicidae) - Determination of the effects on growth by soil contamination (ISO 15952:2006) | |
| Soil quality - Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons - Purge-and-trap method with thermal desorption (ISO 15009:2012) | |
| Soil quality - Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers - Static headspace method (ISO 22155:2011) | |
| Soil quality - Guidelines for the identification of target compounds by gas chromatography and mass spectrometry (ISO 22892:2006) | |
| Solid biofuels - Determination of content of heavy extraneous materials larger than 3,15 mm (ISO 19743:2026) | |
| Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2025) | |
| Solid biofuels - Fuel specifications and classes - Part 5: Graded firewood (ISO 17225-5:2026) | |
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2025) | |
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys... | |
| Specification and qualification of welding procedures for production welding of steel and nickel-base castings (ISO 11970:2025) | |
| Steel - Determination of the thickness of surface-hardened layers (ISO 18203:2026) | |
| Steel cord conveyor belts - Adhesion strength test of the cover to the core layer (ISO 8094:2013) | |
| Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment (ISO 7623:2015) | |
| Steel cord conveyor belts - Part 3: Special safety requirements for belts for use in underground installations (ISO 15236-3:2007) | |
| Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose (ISO 11137-2:2006) | |
| Sustainability information - Part 1: General principles and requirements for validation and verification (ISO 14019-1:2026) | |
| Sustainability information - Part 2: Principles and requirements for verification processes (ISO 14019-2:2026) | |
| Sustainability information - Part 4: Principles and requirements for bodies validating and verifying sustainability information (ISO 14019-4:2026) | |
| Systems for evacuation of plume generated by medical devices - Amendment 1 (ISO 16571:2024/DAM 1:2025) | |
| Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances - Amendment 1 | |
| Technical product documentation - Organization and naming of layers for CAD - Part 1: Overview and principles (ISO 13567-1:1998) | |
| Technical product documentation - Organization and naming of layers for CAD - Part 2: Concepts, format and codes used in construction documentation (ISO 13567-2:1998) | |
| Technical product documentation - Vocabulary - Terms relating to technical drawings, product definition and related documentation (ISO 10209:2012) | |
| Test dusts for evaluating air cleaning equipment (ISO 15957:2026) | |
| Textile conveyor belts - Determination of the net length of an endless (spliced) conveyor belt (ISO 16851:2012) | |
| Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2016) | |
| The human-centred organization - Rationale and general principles (ISO 27500:2016) | |
| Thermal bridges in building construction - Linear thermal transmittance - Simplified methods and default values (ISO 14683:2017) | |
| THERMAL BRIDGES IN BUILDING CONTRUCTION. LINEAR THERMAL TRANSMITTANCE. SIMPLIFIED METHODS AND DEFAULT VALUES (ISO 14683:1999) | |
| Thermal insulation products for building equipment and industrial installations - Determination of design thermal conductivity (ISO 23993:2008) | |
| Thermal performance of building components - Dynamic thermal characteristics - Calculation methods (ISO 13786:2017, Corrected version 2018-03) | |
| Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - General criteria and validation procedures (ISO 13791:2004) | |
| Thermal performance of buildings - Heat transfer via the ground - Calculation methods (ISO 13370:2017) | |
| Thermal performance of buildings - Transmission and ventilation heat transfer coefficients - Calculation method (ISO 13789:2017) | |
| Thermal performance of buildings and materials - Determination of specific airflow rate in buildings - Tracer gas dilution method (ISO 12569:2012) | |
| Thermal performance of buildings and materials - Determination of specific airflow rate in buildings - Tracer gas dilution method (ISO 12569:2017) | |
| Thermal performance of buildings. Thermal design of foundations to avoid frost heave (ISO 13793:2001) | |
| Thermal performance of curtain walling - Calculation of thermal transmittance (ISO 12631:2017) | |
| Thermal performance of windows and doors - Determination of thermal transmittance by hot box method - Part 2: Roof windows and other projecting windows (ISO 12567-2:2005) | |
| Thermoplastics pipes and fittings - Vicat softening temperature - General test method and test conditions for vinyl chloride-based (PVC-U, PVC-C, PVC-HI) and acrylonitrile-based (ABS, ASA) pipes and fittings (ISO 2507:2026)... | |
| Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2024) | |
| Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development (ISO 25119-1:2018) | |
| Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 3: Series development, hardware and software (ISO 25119-3:2018) | |
| Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 4: Production, operation, modification and supporting processes (ISO 25119-4:2018) | |
| TRACTORS, MACHINERY FOR AGRICULTURE AND FORESTRY, POWERED LAWN AND GARDEN EQUIPMENT - SYMBOLS FOR OPERATOR CONTROLS AND OTHER DISPLAYS -PART 4:SYMBOLS FOR FORESTRY MACHINERY - AMENDMENT 1 (ISO 3767-4:1995/AM1:2000 ). | |
| Transfusion equipment for medical use - Part 4: Transfusion sets for single use, gravity feed (ISO 1135-4:2025) | |
| Transfusion equipment for medical use - Part 5: Transfusion sets for single use with pressure infusion apparatus (ISO 1135-5:2025) | |
| Utility connections in port - Part 1: High voltage shore connection (HVSC) systems - General requirements | |
| Vitreous and porcelain enamels - Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply - Quality requirements and testing (ISO 11177:2016) | |
| Washer-disinfectors - Part 6: Requirements and tests for washer-disinfectors employing thermal disinfection for non-critical medical devices and health care equipment (ISO 15883-6:2026) | |
| Water quality - Determination of adsorbable organically bound fluorine, chlorine, bromine and iodine (AOF, AOCl, AOBr, AOI) - Method using combustion and subsequent ion chromatographic measurement (ISO 18127:2026) | |
| Water quality - Determination of ammonium nitrogen in water - Small-scale sealed tube method (ISO 23695:2023) | |
| Water quality - Determination of nitrate in water using small-scale sealed tubes - Part 1: Dimethylphenol colour reaction (ISO 23696-1:2023) | |
| Water quality - Determination of nitrate in water using small-scale sealed tubes - Part 2: Chromotropic acid colour reaction (ISO 23696-2:2023) | |
| Water quality - Determination of the genotoxicity of water and waste water - Salmonella/microsome fluctuation test (Ames fluctuation test) (ISO 11350:2012) | |
| Water quality - Determination of total bound nitrogen (ST-TNb) in water using small-scale sealed tubes - Part 1: Dimethylphenol colour reaction (ISO 23697-1:2023) | |
| Water quality - Determination of total bound nitrogen (ST-TNb) in water using small-scale sealed tubes - Part 2: Chromotropic acid colour reaction (ISO 23697-2:2023) | |
| Water quality - Enumeration of intestinal enterococci - Part 3: Most probable number method (ISO 7899-3:2025) | |
| Welding - Arc stud welding of metallic materials (ISO 14555:2025) | |
| Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities (ISO 17662:2025) | |
| Welding - Studs and ceramic ferrules for arc stud welding - Amendment 1 (ISO 13918:2017/DAM 1:2018) | |
| Welding consumables - Wire and strip electrodes, wires and rods for fusion welding of nickel and nickel alloys - Classification (ISO 18274:2004/Cor.1:200 5 and Cor.2:2006) | |
| Wheat flour - Physical characteristics of doughs - Part 1: Determination of water absorption and rheological properties using a farinograph (ISO 5530-1:2026) | |
| Wood-based panels - Determination of formaldehyde release - Part 2: Small-scale chamber method (ISO 12460-2:2024) | |
| Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method - Amendment 1: Laser spectroscopy (ISO 12460-3:2020/DAM 1:2022) | |
| Woodworking machines - Safety - Part 15: Presses (ISO 19085-15:2025) | |
| Zinc diffusion coatings on ferrous products - Sherardizing - Specification (ISO 17668:2016) |
| << Prev | Next >> |