AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| : Discontinuous analyzers | |
| Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for low voltage adjustable frequency a.c. power drive systems | |
| Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods | |
| Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy | |
| ADMIXTURES FOR CONCRETE, MORTAR AND GROUT. PART 2: CONCRETE ADMIXTURES. DEFINITIONS AND REQUIREMENTS. | |
| Aerospace series - Programme management - Guidelines for project management specification | |
| Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) - Safety | |
| AGRICULTURAL AND FORESTRY MACHINERY. PEDESTRIAN CONTROLLED TRACTORS WITH MOUNTED ROTARY CULTIVATORS, MOTOR HOES, MOTOR HOES WITH DRIVE WHEEL(S). SAFETY | |
| Amendment 1 - Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy | |
| Amendment 1 - Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional | |
| Amendment 1 - Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements | |
| Amendment 1 - Cooking fume extractors - Methods for measuring performance | |
| Amendment 1 - Directly heated negative temperature coefficient thermistors - Part 1: Generic specification | |
| Amendment 1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-12: Particular requirements for transportable threading machines | |
| Amendment 1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-14: Particular requirements for transportable drain cleaners | |
| Amendment 1 - Electroacoustics - Audiometric equipment - Part 6: Instruments for the measurement of otoacoustic emissions | |
| Amendment 1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock | |
| Amendment 1 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4: Type SC connector family | |
| Amendment 1 - Fibre-optic communication subsystem test procedures - Part 4-2: Installed cabling plant - Single-mode attenuation and optical return loss measurements | |
| Amendment 1 - Fragment 1: 18 GHz - 40 GHz Instrumentation | |
| Amendment 1 - High-voltage switchgear and controlgear - Part 213: Voltage detecting and indicating system | |
| Amendment 1 - High-voltage switchgear and controlgear - Part 215: Phase comparator used with VDIS | |
| Amendment 1 - Instrument transformers - Part 9: Digital interface for instrument transformers | |
| Amendment 1 - Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment | |
| Amendment 1 - Measurement procedures for materials used in photovoltaic modules - Part 2-1: Polymeric materials - Frontsheet and backsheet - Safety requirements | |
| Amendment 1 - Measurement procedures for materials used in photovoltaic modules - Part 5-1: Edge seals - Suggested test methods for use with edge seal materials | |
| Amendment 1 - Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test setups and safety aspects | |
| Amendment 1 - Medical electrical equipment - Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis | |
| Amendment 1 - Miniature fuses - Part 6: Fuse-holders for miniature fuse-links | |
| Amendment 1 - Optical amplifiers - Part 5-2: Qualification specifications - Reliability qualification for optical fibre amplifiers | |
| Amendment 1 - Radio frequency connectors - Part 54: Sectional specification for coaxial connectors with 10 mm inner diameter of outer conductor, nominal characteristic impedance 50 O, Series 4,3-10 | |
| Amendment 1 - Rotating electrical machines - Part 18-32: Functional evaluation of insulation systems (Type II) - Electrical endurance qualification procedures for form-wound windings | |
| Amendment 1 - Safety in installations for electroheating and electromagnetic processing - Part 4: Particular requirements for arc furnace installations | |
| Amendment 1 - Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications - Part 3: Prismatic and cylindrical lithium secondary... | |
| Amendment 1 - Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications - Part 4: Coin secondary lithium cells, and... | |
| Amendment 1 - Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV) | |
| Amendment 1 - Ultrasonics - Hydrophones - Part 3: Properties of hydrophones for ultrasonic fields | |
| Amendment 1 - Wind energy generation systems - Part 12-1: Power performance measurements of electricity producing wind turbines | |
| Amendment 1 - Winding wires - Test methods - Part 1: General | |
| Amendment 1/Fragment 2: Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current =16 A per phase) | |
| Amendment 2 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-2: Particular requirements for hedge trimmers | |
| Amendment 2 - Electromechanical telecom elementary relays of assessed quality - Part 1: Generic specification and blank detail specification | |
| Amendment 2 - Photovoltaic systems - Design qualification of solar trackers | |
| Amendment 2 - Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements | |
| Amendment 2 - Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 2: Ceramic enclosures | |
| Amendment 2 - Thermal-links - Requirements and application guide | |
| Appliances with human body contact electrodes. Safety requirements for use without medical supervision. | |
| Application of Markov techniques | |
| Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz | |
| Attachment materials for electronic assembly - Part 1-2: Requirements for soldering pastes for high-quality interconnects in electronics assembly | |
| Attachment materials for electronic assembly - Part 1-3: Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications | |
| Audio and audiovisual equipment - Digital audio parts - Basic measurement methods of audio characteristics - Part 1: General | |
| Audio and audiovisual equipment - Digital audio parts - Basic measurement methods of audio characteristics - Part 2: Consumer use | |
| AUDIO AND AUDIOVISUAL EQUIPMENT. DIGITAL AUDIO PARTS. BASIC METHODS OF MEASUREMENT OF AUDIO CHARACTERISTICS | |
| Audio, video and audiovisual systems - Interconnections and matching values - Preferred matching values of analogue signals | |
| Audio, video and multimedia systems - General channel assignment of multichannel audio | |
| Audio/video, information and communication technology equipment - Part 1: Safety requirements (IEC 62368-1:2014, modified) | |
| Audio/video, information and communication technology equipment - Part 1: Safety requirements | |
| AUDIOVISUAL SYSTEMS. INTERACTIVE TEXT TRANSMISSION SYSTEM (ITTS) | |
| Automatic electrical controls - Part 1: General requirements | |
| Automatic forced draught burners for gaseous fuels | |
| BATCH CONTROL. PART 1: MODELS AND TERMINOLOGY | |
| BROADCAST VIDEO TAPE RECORDERS. METHODS OF MEASUREMENT. PART 4: ANALOGUE AUDIO PERFORMANCE MEASUREMENTS | |
| Capacitors for power electronics | |
| Cavity resonator method to measure the complex permittivity of low-loss dielectric plates | |
| Chemicals used for treatment of water intended for human consumption - Sodium chlorite | |
| Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weatherprotected locations | |
| Classification of insulating liquids | |
| Communication networks and systems for power utility automation - Part 7-410: Basic communication structure - Hydroelectric power plants - Communication for monitoring and control | |
| Conduit systems for cable management - Part 1: General requirements | |
| Connectors - Safety requirements and tests | |
| CONSUMER AUDIO/VIDEO EQUIPMENT - DIGITAL INTERFACE - PART 1: GENERAL | |
| CONSUMER AUDIO/VIDEO EQUIPMENT - DIGITAL INTERFACE - PART 2: SD-DVCR DATA TRANSMISSION | |
| CONSUMER AUDIO/VIDEO EQUIPMENT - DIGITAL INTERFACE - PART 4: MPEG2-TS DATA TRANSMISSION | |
| CONSUMER AUDIO/VIDEO EQUIPMENT - DIGITAL INTERFACE - PART 5: SD-DVCR DATA TRANSMISSION | |
| Consumer audio/video equipment - Digital interface - Part 6: Audio and music data transmission protocol | |
| Consumer audio/video equipment - Digital interface - Part 8: Transmission of ITU-R BT.601 style digital video data | |
| CONSUMER AUDIO/VIDEO EQUIPMENT - DIGITAL INTERFACE. PART 3: HD-DVCR DATA TRANSMISSION. | |
| Current and Voltage sensors or detectors, to be used for fault passage indication purposes - Part 1: general principles and requirements | |
| DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS - RATING TESTS, MARKING, OPERATIONAL REQUIREMENTS AND TECHNICAL DATA SHEET | |
| DESIGNATION FOR SIGNALS AND CONNECTIONS. | |
| Determination of certain substances in electrotechnical products - Part 4: Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS | |
| Determination of power losses in high-voltage direct current (HVDC) converter stations with line commutated converters | |
| Determination of power losses in high-voltage direct current (HVDC) converter stations with line-commutated converters | |
| Digital addressable lighting interface - Part 101: General requirements - System | |
| Digital addressable lighting interface - Part 102: General requirements - Control gear | |
| Digital addressable lighting interface - Part 201: Particular requirements for control gear - Fluorescent lamps (device type 0) | |
| Digital addressable lighting interface - Part 202: Particular requirements for control gear - Self-contained emergency lighting (device type 1) | |
| Digital addressable lighting interface -- Part 203: Particular requirements for control gears; discharge lamps (excluding fluorescent lamps) (device type 2) | |
| Digital addressable lighting interface -- Part 204: Particular requirements for control gear - Low voltage halogen lamps (device type 3) | |
| Digital addressable lighting Interface -- Part 208: Particular requirements for control gear - Switching function (device type 7) | |
| Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 2: Burst-info | |
| Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 6: Non-linear PCM bitstreams according to the MPEG-2 AAC and MPEG-4 AAC formats | |
| Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 7: Non-linear PCM bitstreams according to the ATRAC, ATRAC2/3 and ATRAC-X formats (TA 4) | |
| Digital audiobook file format and player requirements | |
| Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 1: Architecture and protocols | |
| Digital Radio Mondiale (DRM) - System specification for digital transmissions in the broadcasting bands below 30 MHz. | |
| Digital terrestrial television receivers for the DVB-T system | |
| DISTRIBUTION AUTOMATION USING DISTRIBUTION LINE CARRIER SYSTEMS. PART 4-511: DATA COMMUNICATION PROTOCOLS. SYSTEM MANAGEMENT USING PROFILE 61334-5-1. CIASE PROTOCOL | |
| DOOR LEAVES - GENERAL AND LOCAL FLATNESS - MEASUREMENT METHOD. | |
| Drain and sewer systems outside buildings — Sewer system management | |
| ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER | |
| Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets | |
| Electric double-layer capacitors for use in hybrid electric vehicles - Test methods for electrical characteristics | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-10: Particular requirements for hand-held mixers | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-14: Particular requirements for hand-held planers | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-17: Particular requirements for hand-held routers | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-21: Particular requirements for hand-held drain cleaners | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-3: Particular requirements for hand-held grinders, disc-type polishers and disc-type sanders | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-5: Particular requirements for hand-held circular saws (IEC 62841-2-5:2014, modified) | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-5: Particular requirements for hand-held circular saws | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-8: Particular requirements for hand-held shears and nibblers | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-9: Particular requirements for hand-held tappers and threaders | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-12: Particular requirements for transportable threading machines | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-14: Particular requirements for transportable drain cleaners | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified) | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-1: Particular requirements for chain saws | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-2: Particular requirements for hedge trimmers | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-3: Particular requirements for pedestrian controlled walk-behind lawnmowers | |
| Electric toys - Safety | |
| Electric vehicle conductive charging system - Part 24: Digital communication between a DC EV supply equipment and an electric vehicle for control of DC charging | |
| Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 3: Circuit-breakers for DC operation | |
| Electrical accessories - Residual current monitors for household and similar uses (RCMs) | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment | |
| ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE. EMC REQUIREMENTS. PART 1: GENERAL REQUIREMENTS | |
| Electrical measuring transducers for converting AC and DC electrical quantities to analogue or digital signals | |
| Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part... | |
| Electricity metering - Data exchange for meter reading, tariff and load control - Part 47: COSEM transport layers for IPv4 networks | |
| Electricity metering data exchange - The DLMS/COSEM suite - Part 5-3: DLMS/COSEM application layer | |
| Electricity metering data exchange - The DLMS/COSEM suite - Part 6-1: Object Identification System (OBIS) | |
| Electricity metering data exchange - The DLMS/COSEM suite - Part 6-2: COSEM interface classes | |
| Electricity metering equipment (a.c.) - Particular requirements - Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2) | |
| Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters for active energy (classes 1 and 2) | |
| Electricity metering equipment (a.c.) - Particular requirements - Part 22: Static meters for active energy (classes 0,2 S and 0,5 S) | |
| Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3) | |
| Electricity metering equipment (a.c.) - Particular requirements - Part 24: Static meters for reactive energy at fundamental frequency (classes 0,5 S, 1 S and 1) | |
| Electricity metering equipment (ac) - Acceptance inspection -- Part 11: General acceptance inspection methods | |
| Electricity metering equipment (ac) - Acceptance inspection -- Part 21: Particular requirements for electromechanical meters for active energy (classes 0,5, 1 and 2) | |
| Electricity metering equipment (ac) - Acceptance inspection -- Part 31: Particular requirements for static meters for active energy (classes 0,2 S, 0,5 S, 1 and 2) | |
| Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment | |
| Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safety requirements and tests | |
| Electricity metering equipment - General requirements, tests and test conditions - Part 31: Product safety requirements and tests | |
| Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 1: Methods of measuring and specifying the performance of system components | |
| Electroacoustics - Octave-band and fractional-octave-ba nd filters - Part 2: Pattern-evaluation tests | |
| Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests | |
| Electroacoustics - Specifications for personal sound exposure meters | |
| Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques – Unbalance, immunity test for equipment with input current not exceeding 16 A per phase | |
| Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods | |
| Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for equipment in residential locations | |
| Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission | |
| Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard | |
| Electromechanical contactors for household and similar purposes | |
| Electromechanical elementary relays - Part 2-1: Reliability - Procedure for the verification of B10 values | |
| Electromechanical elementary relays - Part 2: Reliability | |
| Electromechanical elementary relays -- Part 2: Reliability | |
| Electromechanical elementary relays of assessed quality - Part 10: Sectional specification - Relays for industrial application | |
| Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC) | |
| Electrostatics - Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements | |
| Energy management system application program interface (EMS-API) - Part 456: Solved power system state profiles | |
| Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation | |
| Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation | |
| Exposure to electric or magnetic fields in the low and intermediate frequency range - Methods for calculating the current density and internal electric field induced in the human body -... | |
| Ferrite cores - Dimensions - Part 8: E-cores | |
| Fibre optic active components and devices - Reliability standards - Part 3: Laser modules used for telecommunication | |
| FIBRE OPTIC COMMUNICATION SUBSYSTEM BASIC TEST PROCEDURES. PART 3-5: TEST PROCEDURES FOR ANALOGUE SYSTEMS. CROSS MODULATION MEASUREMENT FOR VIDEO SYSTEMS | |
| Fibre optic connector interfaces - Part 10: Type Mini-MPO connector family | |
| Fibre optic connector interfaces - Part 13: Type FC-PC connector | |
| Fibre optic connector interfaces -- Part 12: Type FS connector family | |
| Fibre optic connector interfaces -- Part 5: Type MT connector family | |
| Fibre optic connector interfaces -- Part 6: Type MU connector family | |
| FIBRE OPTIC CONNECTOR INTERFACES. PART 2: TYPE BFOC/2,5 CONNECTOR FAMILY. | |
| Fibre optic connector optical interfaces - Part 1: Optical interfaces for single mode non-dispersion shifted fibres - General and guidance | |
| Fibre optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-34: Tests - Resistance to solvents and contaminating fluids of interconnecting components and closures | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-14: Examinations and measurements - Error and repeatability of the attenuation settings of a variable... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Fibre optic connector endface visual and automated inspection | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-39: Examinations and measurements - Physical contact (PC) optical connector reference plug selection for return... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-43: Examinations and measurements - Mode transfer function measurement for fibre optic sources | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-46: Examinations and Measurements - Bore diameter in rectangular ferrules | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-50: Examinations and measurements - Crosstalk for optical spatial switches | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-21: Tests - Composite temperature-humidity cyclic test | |
| Fibre optic interconnecting devices and passive components - Fibre optic circulators - Generic specification | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 36: Type SAC connector family | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 6: Type MU connector family | |
| Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification | |
| Fibre optic interconnecting devices and passive components - Interface standard for fibre management systems - Part 1: General and guidance | |
| Fibre optic isolators -- Part 1: Generic specification | |
| Fibre optics - Launch condition requirements for measuring multimode attenuation | |
| Fixed electric double-layer capacitors for use in electronic equipment -- Part 2-1: Blank detail specification - Electric-double layer capacitors for power application - Assessment level EZ (IEC 62391-2-1:2006) | |
| Framework for energy market communications - Part 451-3: Transmission capacity allocation business process (explicit or implicit auction) and contextual models for European market | |
| Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety | |
| Fuel cell technologies -- Part 6-100: Micro fuel cell power system - Safety | |
| Function Blocks (FB) for process control - Part 3: Electronic Device Description Language (EDDL) | |
| Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming Requirements | |
| Furniture. Bunk beds for domestic use. Part 1: Safety requirements. | |
| GARDEN EQUIPMENT. HAND HELD, INTEGRALLY POWERED HEDGE TRIMMERS. SAFETY | |
| GAS ANALYZERS - EXPRESSION OF PERFORMANCE - PART 3: PARAMAGNETIC OXIGEN ANALYZERS | |
| GAS-FIRED STORAGE WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER | |
| GAZ ANALYZERS. EXPRESSION OF PERFORMANCE. PART 3: PARAMAGNETIC OXYGEN ANALYZER. | |
| General requirements for arc fault detection devices | |
| Glass in building - Determination of thermal transmittance (U value) - Calculation method | |
| Grading capacitors for high-voltage alternating current circuit-breakers - Part 1: General | |
| Guidance on human aspects of dependability | |
| HAND-HELD HON ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 14: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS | |
| HAND-HELD HON ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 15: CUTTING-OFF AND CRIMPING POWER TOOLS | |
| HEADFORMS FOR USE IN THE TESTING OF PROTECTIVE HELMETS. | |
| Heat shrinkable moulded shapes -- Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance -- Sheet 100: Heat-shrinkable moulded shape dimensions | |
| Helical-scan digital video cassette recording system using 12,65 mm (0,5 in) magnetic tape - Format HD-D5 -- Part 3: Data stream format (TA 6) | |
| High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics | |
| High-voltage direct current (HVDC) installations - System tests | |
| High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers | |
| High-voltage switchgear and controlgear - Part 208: Methods to quantify the steady state, power-frequency electromagnetic fields generated by HV switchgear assemblies and HV/LV prefabricated substations, both for rated voltages above... | |
| High-voltage test techniques - Charge-based measurement of partial discharges | |
| High-voltage test techniques - Part 1: General terminology and test requirements | |
| High-voltage test techniques - Part 2: Measuring systems | |
| Hollow metallic waveguides - Part 2: Relevant specifications for ordinary rectangular waveguides | |
| Household and similar electrical appliances - Safety - Part 1: General requirements | |
| Household and similar electrical appliances - Safety - Part 2-104: Particular requirements for appliances to recover and/or recycle refrigerant from air conditioning and refrigeration equipment | |
| Household and similar electrical appliances - Safety - Part 2-106: Particular requirements for heated carpets and for heating units for room heating installed under removable floor coverings | |
| Household and similar electrical appliances - Safety - Part 2-108: Particular requirements for electrolysers | |
| Household and similar electrical appliances - Safety - Part 2-113: Particular requirements for beauty care appliances incorporating lasers and intense light sources | |
| Household and similar electrical appliances - Safety - Part 2-113: Particular requirements for cosmetic and beauty care appliances incorporating lasers and intense light sources | |
| Household and similar electrical appliances - Safety - Part 2-115: Particular requirements for skin beauty care appliances | |
| Household and similar electrical appliances - Safety - Part 2-120: Particular requirements for the safety of appliances for the generation of directly inhalable aerosols | |
| Household and similar electrical appliances - Safety - Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens | |
| Household and similar electrical appliances - Safety - Part 2-28: Particular requirements for sewing machines | |
| Household and similar electrical appliances - Safety - Part 2-34: Particular requirements for motor-compressors | |
| Household and similar electrical appliances - Safety - Part 2-4: Particular requirements for spin extractors | |
| Household and similar electrical appliances - Safety - Part 2-59: Particular requirements for insect killers | |
| Household and similar electrical appliances - Safety - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines | |
| Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines | |
| Household and similar electrical appliances - Safety - Part 2-90: Particular requirements for commercial microwave ovens | |
| Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance | |
| Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance | |
| Household portable appliances for cooking, grilling and similar use - Methods for measuring the performance | |
| Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures - Part 1: Procedure to determine the specific absorption rate (SAR)... | |
| IDENTIFICATION CARD SYSTEMS - INTERSECTOR THIN FLEXIBLE CARDS - PART 3: TEST METHODS | |
| Identification systems enabling unambiguous information interchange - Requirements -- Part 1: Principles and methods | |
| IEC standard voltages | |
| Independent closed-fronted gas-fired type B11, type C11, type C31 and type C91 heaters | |
| Independent gas-fired convection heaters | |
| Industrial bump caps | |
| Industrial communication networks - High availability automation networks - Part 1: General concepts and calculation methods | |
| Industrial communication networks - High availability automation networks - Part 3: Parallel Redundancy Protocol (PRP) and High-availability Seamless Redundancy (HSR) | |
| Industrial communication networks - High availability automation networks - Part 4: Cross-network Redundancy Protocol (CRP) | |
| Industrial communication networks - Profiles - Part 3-18: Functional safety fieldbuses - Additional specifications for CPF 18 | |
| Industrial communication networks - Profiles - Part 5-10: Installation of fieldbuses - Installation profiles for CPF 10 | |
| Industrial communication networks - Profiles - Part 5-11: Installation of fieldbuses - Installation profiles for CPF 11 | |
| Industrial communication networks - Profiles - Part 5-12: Installation of fieldbuses - Installation profiles for CPF 12 | |
| Industrial communication networks - Profiles - Part 5-14: Installation of fieldbuses - Installation profiles for CPF 14 | |
| Industrial communication networks - Profiles - Part 5-15: Installation of fieldbuses - Installation profiles for CPF 15 | |
| Industrial communication networks - Profiles -- Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3 | |
| Industrial communication networks - Profiles -- Part 3: Functional safety fieldbuses | |
| Industrial microwave heating installations - Test methods for the determination of power output | |
| Industrial process control systems - Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs mounted on an actuator valve assembly | |
| Industrial systems, installations and equipment and industrial products - Designation of signals | |
| Industrial systems, installations and equipment and industrial products - Identification of terminals within a system | |
| Industrial systems, installations and equipment and industrial products - Labelling of cables and cores | |
| Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 1: Basic rules | |
| Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations -- Part 2: Classification of objects and codes for classes | |
| Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases | |
| Industrial-process measurement and control - Programmable controllers - Part 2: Equipment requirements and tests | |
| Inland navigation vessels - Railings for decks and side decks - Requirements, designs and types | |
| Instrument transformers - Part 1: General requirements | |
| Instrument transformers - Part 20: Safety requirements of instrument transformers for high voltage applications | |
| Instrument transformers - Part 6: Additional general requirements for low-power instrument transformers | |
| Insulating liquids - Determination of the breakdown voltage at power frequency - Test method | |
| Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Round laminated rolled... | |
| Insulating materials-Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes-Part1: Definitions, designations and general requirements (IEC 61212-1:2006) | |
| Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests | |
| Insulators for overhead lines - Composite suspension and tension insulators with AC voltage greater than 1 000 V and DC voltage greater than 1 500 V - Definitions, test methods... | |
| Integrated circuits - EMC evaluation of transceivers - Part 5: Ethernet transceivers | |
| Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 4: Measurement of conducted emissions - 1 ohm/150 ohm direct coupling method | |
| Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz -- Part 6: Measurement of conducted emissions - Magnetic probe method | |
| Integrated circuits - Measurement of electromagnetic immunity 150 kHz to 1 GHz -- Part 4: Direct RF power injection method | |
| INTEGRATED CIRCUITS. MEMORY DEVICES PIN CONFIGURATIONS | |
| Interface for loudspeakers with digital input signals based on IEC 60958 | |
| Internet protocol (IP) and transport stream (TS) based service access | |
| Liquid crystal and solid-state display devices - Part 1: Generic specification | |
| Live working - Conformity assessment applicable to tools, devices and equipment | |
| LIVE WORKING - PORTABLE EQUIPMENT FOR EARTHING OR EARTHING AND SHORT-CIRCUITING | |
| Live working - Terminology for tools, devices and equipment | |
| Low-voltage fuses - Part 3: Supplementary requirements for fuses for operation by unskilled persons (fuses mainly for household and similar applications) - Examples of standardized systems of fuses A to... | |
| Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices | |
| Low-voltage switchgear and controlgear - Device profiles for networked industrial devices - Part 1: General rules for the development of device profiles | |
| Low-voltage switchgear and controlgear - Part 1: General rules | |
| Low-voltage switchgear and controlgear - Part 2: Circuit-breakers | |
| Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units | |
| Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters | |
| Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices | |
| Low-voltage switchgear and controlgear - Part 5-7: Control circuit devices and switching elements - Proximity devices with analogue output | |
| Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors | |
| Low-voltage switchgear and controlgear - Part 9-2: Active arc-fault mitigation systems - Optical-based internal arc-detection and mitigation devices | |
| Low-voltage switchgear and controlgear - Product data and properties for information exchange - Part 1: Catalogue data | |
| Low-voltage switchgear and controlgear assemblies - Part 1: General rules | |
| Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies | |
| Low-voltage switchgear and controlgear enclosed equipment - Part 1: Additional requirements for enclosed switch-disconnectors in accordance with IEC 60947-3 - Isolation of electrical equipment during repair and maintenance work in... | |
| Luminaire performance - Part 1: General Requirements | |
| Luminaire performance - Part 2-1: Particular requirements for LED luminaires | |
| Maritime navigation and radiocommunication equipment and systems - Automatic Identification System (AIS) - Part 1: AIS Base Stations - Minimum operational and performance requirements, methods of testing and required test... | |
| Maritime navigation and radiocommunication equipment and systems - Class B shipborne equipment of the automatic identification system (AIS) - Part 1: Carrier-sense time division multiple access (CSTDMA) techniques | |
| Maritime navigation and radiocommunication equipment and systems - Class B shipborne equipment of the automatic identification system (AIS) -- Part 1: Carrier-sense time division multiple access (CSTDMA) techniques | |
| Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 450: Multiple talkers and multiple listeners - Ethernet interconnection | |
| Maritime navigation and radiocommunication equipment and systems - Integrated bridge systems (IBS) - Operational and performance requirements, methods of testing and required test results | |
| MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - SHIPBORNE VOYAGE DATA RECORDER (VDR) - PERFORMANCE REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS | |
| MARITIME NAVIGATION AND RADIOCOMUNNICATION EQUIPMENT AND SYSTEMS - PART 1: SHIPBORNE AUTOMATIC TRANSPONDER SYSTEM INSTALLATION USING VHF DIGITAL SLECTIVE CALLING (DSC) TECHNIQUES. OPERATIONAL AND PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND... | |
| Measurement methods for reflectivity of electromagnetic wave absorbers in millimetre wave frequency | |
| Measurement of exposure to radio-frequency electromagnetic fields - Field strength in the frequency range 100 kHz to 1 GHz | |
| Medical electrical equipment - Medical image display systems - Part 1: Evaluation methods | |
| Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use... | |
| Metal halide lamps - Performance specification | |
| Metallic cables and other passive components test methods - Part 4-7: Electromagnetic compatibility (EMC) -Test method for measuring of transfer impedance ZT and screening attenuation aS or coupling attenuation aC... | |
| Microwave ferrite components - Measuring methods for major properties | |
| Miscellaneous lamps | |
| Mobile and portable DVB-T/H radio access - Part 2: Interface conformance testing | |
| MOBILE WASTE CONTAINERS. PART 4: CONTAINERS WITH 4 WHEELS WITH A CAPACITY FROM 750 L TO 1700 L WITH FLAT LID(S), FOR WIDE TUNNION OR BG-AND/OR WIDE COMB LIFTING DEVICE. | |
| Multimedia gateway in home networks - Guidelines | |
| Multimedia home networks - Home network communication protocol over IP for multimedia household appliances | |
| Multimedia home server systems - Digital rights permission code | |
| Multimedia quality - Method of assessment of synchronization of audio and video | |
| Multimedia systems and equipment - Colour measurement and management - Part 12-1: Metadata for identification of colour gamut (Gamut ID) | |
| Multimedia systems and equipment - Colour measurement and management - Part 2-4: Colour management - Extended-gamut YCC colour space for video applications - xvYCC | |
| Multimedia systems and equipment - Multimedia e-publishing and e-books - Reader's format for e-publishing | |
| Noise suppression sheet for digital devices and equipment - Part 2: Measuring method | |
| Optical circuit boards - Test and measurement procedures -- Part 2-2: Measurements: Dimensions of optical circuit boards | |
| Optical fibre cables - Part 1-107: Generic specification - Basic optical cable test procedures - Mechanical test methods - Torsion, method e7 | |
| Optical fibre cables - Part 1-124: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Installation test for microduct cabling, Method E24 | |
| Optical fibre cables - Part 1-129: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Straight midspan access to optical elements, Method E29 | |
| Optical fibre cables - Part 1-130: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Coefficient of friction between cables, Methods E30 | |
| Optical fibre cables - Part 1-131: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Microduct inner clearance test, method e31 | |
| Optical fibre cables - Part 1-133: Generic specifications - Basic optical cable test procedures - Mechanical test methods - Multiple cable coiling and uncoiling performance, Method E33 | |
| Optical fibre cables - Part 1-207: Generic specification - Basic optical cable test procedures - Environmental test methods - Nuclear radiation, Method F7 | |
| Optical fibre cables - Part 1-208: Generic specification - Basic optical cable test procedures - Environmental test methods - Pneumatic resistance, Method F8 | |
| Optical fibre cables - Part 1-216: Generic specification - Basic optical cable test procedures - Environmental test methods - Compound flow (drip), Method F16 | |
| Optical fibre cables - Part 1-307: Generic specification - Basic optical cable test procedures - Cable element test methods - Tube kinking, method G7 | |
| Optical fibres - Part 2-50: Product specifications - Sectional specification for class b single-mode fibres | |
| Part 6-3: Generic standards - Emission standard for equipment in residential environments - Conducted emission requirements in the frequency range 9 khz - 150 khz | |
| Part 6-3: Generic standards - Emission standard for equipment in residential environments - Miscellaneous items on general maintenance | |
| Passive RF and microwave devices, intermodulation level measurement - Part 1: General requirements and measuring methods | |
| Passive RF and microwave devices, intermodulation level measurement - Part 2: Measurement of passive intermodulation in coaxial cable assemblies | |
| Passive RF and microwave devices, intermodulation level measurement - Part 3: Measurement of passive intermodulation in coaxial connectors | |
| Passive RF and microwave devices, intermodulation level measurement - Part 4: Measurement of passive intermodulation in coaxial cables | |
| Passive RF and microwave devices, intermodulation level measurement - Part 6: Measurement of passive intermodulation in antennas | |
| Passive RF and microwave devices, intermodulation level measurement - Part 8: Measurement of passive intermodulation generated by objects exposed to RF radiation | |
| Personal fall protection equipment - Anchor devices | |
| Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction | |
| Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing | |
| Photovoltaic (PV) module safety qualification -- Part 1: Requirements for construction | |
| Photovoltaic power generating systems - EMC requirements and test methods for power conversion equipment | |
| PILING EQUIPMENT - SAFETY REQUIREMENTS. | |
| Plasma display panels - Part 1: Terminology and letter symbols | |
| Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements | |
| Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility requirements for AC pin and contact-tube accessories | |
| PM-cores made of magnetic oxides and associated parts - Dimensions | |
| Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria | |
| Power capacitors - Low-voltage power factor correction banks | |
| Power electronics for electrical transmission and distribution systems - Testing of thyristor valves for static VAR compensators. | |
| Power electronics for electrical transmission and distribution systems - Testing of thyristor valves for static VAR compensators | |
| Pressure governors for gas appliances for inlet pressures up to 200 mbar. | |
| PRESSURE GOVERNORS FOR GAS APPLIANCES FOR INLET PRESSURES UP TO 200 MBAR | |
| Printed boards and printed board assemblies - Design and use - Part 1-1: Generic requirements - Flatness considerations for electronic assemblies | |
| Printed boards and printed board assemblies - Design and use - Part 5-3: Attachment (land/joint) considerations - Components with gull-wing leads on two sides | |
| Printed boards and printed board assemblies - Design and use - Part 5-8: Attachment (land/joint) considerations - Area array components (BGA, FBGA, CGA, LGA) | |
| Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols - Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits | |
| Radiation protection instrumentation - Dosimetry systems with integrating passive detectors for individual, workplace and environmental monitoring of photon and beta radiation | |
| Radiation protection instrumentation - In vivo counters - Classification, general requirements and test procedures for portable, transportable and installed equipment (IEC 61582:2004) | |
| Radio data system (RDS) - Receiver products and characteristics - Methods of measurement | |
| Radio frequency and coaxial cable assemblies - Part 2-8: Detail specification for cable assemblies for radio and TV receivers - Frequency range up to 3 000 MHz, screening class A++,... | |
| Radio frequency and coaxial cable assemblies - Part 4-4: Semi-rigid coaxial cable - Detail specification - Frequency range up to 6 000 MHz, type 50-5 multi-channel cables | |
| RADIO FREQUENCY CABLES -- PART 3: SECTIONAL SPECIFICATION FOR COAXIAL CABLES FOR LOCAL AREA NETWORKS | |
| RADIO-FRECUENCY CABLES. SPECIFICATIONS. SEMI-RIGID RADIO-FREQUENCY AND COAXIAL CABLES WITH POLYTETRAFLUORETHYLE NE (PTFE) INSULATION. SECTIONAL SPECIFICATION. | |
| Radio-frequency connectors - Part 1-9: Mechanical test methods - Safety wire hole pull-out | |
| Radio-frequency connectors - Part 64: Sectional specification - RF coaxial connectors with 0,8 mm inner diameter of outer conductor - Characteristic impedance 50 O (type 0,8) | |
| Radio-frequency connectors - Part 74: Sectional specification for HN series RF coaxial connectors with screw coupling - Characteristic impedance 50 ¿ | |
| RADIO-FREQUENCY CONNECTORS. GENERIC SPECIFICATION. GENERAL REQUIREMENTS AND MEASURING METHODS. | |
| Railway applications - Rolling stock equipment - Capacitors for power electronics | |
| RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS | |
| Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) -- Part 4: Pack header table and contents... | |
| Risk management - Risk assessment techniques | |
| Rotating electrical machines - Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines | |
| Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification | |
| Safety of machinery - Functional safety of safety-related control systems | |
| Safety of machinery - Functional safety of safety-related electrical, Electronic and programmable electronic control systems | |
| Safety of toys - Part 1: Mechanical and physical properties | |
| Safety of toys - Part 20: Microbiological safety of toys containing accessible aqueous media | |
| SAFETY OF TOYS - PART 4: EXPERIMENTAL SETS FOR CHEMISTRY AND RELATED ACTIVITIES | |
| Safety of toys - Part 5: Chemical toys (sets) other than experimental sets | |
| Safety of toys - Part 7: Finger paints - Requirements and test methods | |
| Safety of toys - Part 8: Activity toys for domestic use | |
| Safety of toys - Part 8: Swings, slides and similar activity toys for indoor and outdoor family domestic use | |
| Safety of transformers, reactors, power supply units and combination thereof - Part 2-12: Particular requirements and tests for constant voltage transformers and power supply units for constant voltage | |
| Safety of transformers, reactors, power supply units and combinations thereof - Part 2-13: Particular requirements and tests for auto-transformers and power supply units incorporating auto-transformers for general applications | |
| Safety of transformers, reactors, power supply units and combinations thereof - Part 2-14: Particular requirements and tests for variable transformers and power supply units incorporating variable transformers for general applications... | |
| Safety of transformers, reactors, power supply units and combinations thereof - Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply... | |
| Safety of transformers, reactors, power supply units and combinations thereof - Part 2-20: Particular requirements and tests for small reactors | |
| Safety of transformers, reactors, power supply units and combinations thereof - Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites | |
| Safety of transformers, reactors, power supply units and combinations thereof - Part 2-2: Particular requirements and tests for control transformers and power supply units incorporating control transformers | |
| Safety of transformers, reactors, power supply units and combinations thereof - Part 2-3: Particular requirements and tests for ignition transformers for gas and oil burners | |
| Safety of transformers, reactors, power supply units and combinations thereof - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers for general applications... | |
| Safety of transformers, reactors, power supply units and combinations thereof - Part 2-5: Particular requirements and test for transformer for shavers, power supply units for shavers and shaver supply units... | |
| Safety of transformers, reactors, power supply units and combinations thereof - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers for... | |
| Safety of transformers, reactors, power supply units and combinations thereof - Part 2-7: Particular requirements and tests for transformers and power supply units for toys | |
| Safety of transformers, reactors, power supply units and combinations thereof - Part 2-8: Particular requirements and tests for transformers and power supply units for bells and chimes | |
| Safety of transformers, reactors, power supply units and combinations thereof - Part 2-9: Particular requirements and tests for transformers and power supply units for class III handlamps | |
| Safety of woodworking machines - Combined woodworking machines | |
| Safety of woodworking machines - One side moulding machines with rotating tools - Part 3: Numerically controlled (NC) boring and routing machines | |
| Safety requirements for power electronic converter systems and equipment - Part 1: General | |
| Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 30: Electric and hydraulic service lifts | |
| Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 42: Vertical lifting appliances with enclosed carrier intended for... | |
| Safety rules for the construction and installation of lifts. Particular applications for passenger and goods passenger lifts. Part 73: Behaviour of lifts in the event of fire | |
| Sample preparation for measurement of mercury level in fluorescent lamps | |
| Secondary batteries (except lithium) for the propulsion of electric road vehicles - Performance and endurance tests | |
| Secondary batteries for the propulsion of electric road vehicles -- Part 1: Test parameters | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 2: Nickel-metal hydride | |
| Security for industrial automation and control systems - Part 4-1: Secure product development lifecycle requirements | |
| Security for industrial automation and control systems - Part 4-2: Technical security requirements for ACS components | |
| Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications | |
| Sicherheit von Transformatoren, Drosseln, Netzgeräten und deren Kombinationen - Teil 2-15: Besondere Anforderungen und Prüfungen für Trenntransformatoren für medizinische IT-Systeme zur Versorgung medizinischer Räumlichkeiten | |
| Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for intallation in vehicles and boats | |
| SPECIFIED TIME RELAYS FOR INDUSTRIAL USE. PART 1: REQUIREMENTS AND TESTS | |
| Standard data element types with associated classification scheme for electric components - Part 4: IEC reference collection of standard data element types and component classes | |
| Standard data elements types with associated classification scheme for electric items - Part 1: Definitions - Principles and methods | |
| Standard voltages for DC and AC traction systems (Proposed horizontal standard) | |
| Static VAR compensators (SVC) - Testing of thyristor valves | |
| Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 2: Ceramic enclosures | |
| SURGE PROTECTION DEVICES CONNECTED TO TELECOMMUNICATION AND SIGNALLING NETWORKS | |
| Surge protective devices connected to Low-voltage power distribution systems - Performance requirements and testing methods (Introduction of maintenance items) | |
| Synthetic organic esters - Guidelines for maintenance and use in electrical equipment | |
| Terminology for voltage-sourced converters (VSC) for high-voltage direct current (HVDC) systems | |
| Terrestrial digital multimedia broadcasting (T-DMB) receivers -- Part 1: Basic requirement | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies -- Part 2: Test methods for materials for interconnection structures | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies -- Part 3: Test methods for interconnection structures (printed boards) | |
| Transformers and inductors for use in electronic and telecommunication equipment - Part 5: Sectional specification for pulse transformers on the basis of the capability approval procedure | |
| Transformers and inductors for use in electronic and telecommunication equipment - Part 6: Sectional specification for inductors on the basis of the capability approval procedure | |
| TRANSPORTABLE GAS CYLINDERS - VALVE PROTECTION CAPS AND VALVE GUARDS FOR INDUSTRIAL AND MEDICAL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTS. | |
| Ultrasonics - Field characterization - Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic fields | |
| Ultrasonics - Hydrophones - Part 1: Measurement and characterization of medical ultrasonic fields up to 40 MHz | |
| Ultrasonics - Hydrophones - Part 2: Calibration for ultrasonic fields up to 40 MHz | |
| Ultrasonics - Hydrophones - Part 3: Properties of hydrophones for ultrasonic fields up to 40 MHz | |
| Ultrasonics - Hydrophones -- Part 2: Calibration for ultrasonic fields up to 40 MHz | |
| Ultrasonics - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 0,5 MHz to 5 MHz | |
| Ultrasonics - Pulse-echo scanners -- Part 1: Techniques for calibrating spatial measurement systems and measurement of system point-spread function response | |
| Uninterruptible power systems (UPS) -- Part 3: Method of specifying the performance and test requirements | |
| VIDEODISPLAYERS - METHODS OF MEASUREMENT | |
| Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing | |
| Wind energy generation systems - Part 1: Design requirements | |
| Wind energy generation systems - Part 40: Electromagnetic compatibility (EMC) - Requirements and test methods | |
| Wind turbines - Part 12-2: Power performance of electricity-producin g wind turbines based on nacelle anemometry |
| << Prev | Next >> |