AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
70
80
90
100
110
120
123
124
125
126
127
128
129
130
131
132
133
134
135
140
150
160
170
180
| Product Name | Notes |
|---|---|
| Aerospace series - Static seal elements O-Ring ethylene-propylene, moulded, phosphate ester resistant (- 55 °C to 107 °C) - Inch series (Endorsed by Asociación Española de Normalización in June of... | |
| Aerospace series - Static seal elements O-Ring for straight thread tube fitting boss, ethylene-propylene, moulded, phosphate ester resistant (-55 °C to 107 °C) - Inch series (Endorsed by Asociación Española... | |
| AUTOMATIC ELECTRICAL CONTROL FOR HOUSEHOLD AND SIMILAR USE. PART 1: GENERAL REQUIREMENTS. | |
| Automatic electrical controls - Part 1: General requirements | |
| Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems | |
| Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements | |
| Automatic electrical controls for household and similar use - Part 1: General requirements | |
| Automatic electrical controls for household and similar use - Part 2-11: Particular requirements for energy regulators | |
| Automatic electrical controls for household and similar use - Part 2-12: Particular requirements for electrically operated door locks | |
| Automatic electrical controls for household and similar use - Part 2-13: Particular requirements for humidity sensing controls | |
| Automatic electrical controls for household and similar use - Part 2-14: Particular requirements for electric actuators | |
| Automatic electrical controls for household and similar use - Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level sensing controls | |
| Automatic electrical controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements | |
| Automatic electrical controls for household and similar use - Part 2-2: Particular requirements for thermal motor protectors | |
| Automatic electrical controls for household and similar use - Part 2-4: Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type | |
| Automatic electrical controls for household and similar use - Part 2-5: Particular requirements for automatic electrical burner control systems | |
| Automatic electrical controls for household and similar use - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements | |
| Automatic electrical controls for household and similar use - Part 2-7: Particular requirements for timers and time switches | |
| Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements | |
| Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls | |
| Automatic electrical controls for household and similar use -- Part 1: General requirements. | |
| Automatic electrical controls for household and similar use -- Part 1: General requirements | |
| Automatic electrical controls for household and similar use -- Part 2-10: Particular requirements for motor starting relays | |
| Automatic electrical controls for household and similar use -- Part 2-10: Particular requirements for motor-starting relays | |
| Automatic electrical controls for household and similar use -- Part 2-11: Particular requirements for energy regulators | |
| Automatic electrical controls for household and similar use -- Part 2-12: Particular requirements for electrically operated door locks | |
| Automatic electrical controls for household and similar use -- Part 2-13: Particular requirements for humidity sensing controls. | |
| Automatic electrical controls for household and similar use -- Part 2-13: Particular requirements for humidity sensing controls | |
| Automatic electrical controls for household and similar use -- Part 2-15: Particular requirements for automatic electrical water level sensing controls of the float or electrode-sensor type used in boiler applications... | |
| Automatic electrical controls for household and similar use -- Part 2-16: Particular requirements for automatic electrical water level controls of the float type for household and similar applications. | |
| Automatic electrical controls for household and similar use -- Part 2-16: Particular requirements for automatic electrical water level controls of the float type for household and similar applications | |
| Automatic electrical controls for household and similar use -- Part 2-18: Particular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements | |
| Automatic electrical controls for household and similar use -- Part 2-1: Particular requirements for electrical controls for electrical household appliances | |
| Automatic electrical controls for household and similar use -- Part 2-3: Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps. | |
| Automatic electrical controls for household and similar use -- Part 2-3: Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps | |
| Automatic electrical controls for household and similar use -- Part 2-4: Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type | |
| Automatic electrical controls for household and similar use -- Part 2-7: Particular requirements for timers and time switches. | |
| Automatic electrical controls for household and similar use -- Part 2-7: Particular requirements for timers and time switches | |
| Automatic electrical controls for household and similar use -- Part 2-9: Particular requirements for temperature sensing controls (IEC 60730-2-9:2000/A2:20 04, modified) | |
| Automatic electrical controls for household and similar use -- Part 2-9: Particular requirements for temperature sensing controls. | |
| Automatic electrical controls for household and similar use -- Part 2-9: Particular requirements for temperature sensing controls | |
| Automatic electrical controls for household and similar use -- Part 2: Particular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements. | |
| Automatic electrical controls for household and similar use -- Part 2: Particular requirements for automatic electrical water level operating controls of the float type for household and similar applications. | |
| Automatic electrical controls for household and similar use -- Part 2: Particular requirements for electrical controls for electrical household appliances. | |
| Automatic electrical controls for household and similar use -- Part 2: Particular requirements for humidity sensing controls. | |
| Automatic electrical controls for household and similar use -- Part 2: Particular requirements for temperature sensing controls. | |
| Automatic electrical controls for household and similar use -- Part 2: Particular requirements for temperature sensing controls | |
| Automatic electrical controls for household and similar use -- Part 2: Particular requirements for thermal motor protectors. | |
| AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE. PART 1: GENERAL REQUIREMENTS. | |
| AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE. PART 2: PARTICULAR REQUIREMENTS FOR AUTOMATIC ELECTRICAL BURNER CONTROL SYSTEMS. | |
| AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE. PART 2: PARTICULAR REQUIREMENTS FOR AUTOMATIC ELECTRICAL PRESSURE SENSING CONTROLS INCLUDING MECHANICAL REQUIREMENTS. | |
| AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE. PART 2: PARTICULAR REQUIREMENTS FOR AUTOMATIC ELECTRICAL WATER LEVEL OPERATING CONTROLS OF THE FLOAT TYPE FOR HOUSEHOLD AND SIMILAR APPLICATIONS. | |
| AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE. PART 2: PARTICULAR REQUIREMENTS FOR AUTOMATIC ELECTRICAL WATER LEVEL SENSING CONTROLS OF THE FLOAT OR ELECTRODE-SENSOR TYPE USED IN BOILER APPLICATIONS. | |
| AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE. PART 2: PARTICULAR REQUIREMENTS FOR ELECTRICAL CONTROLS FOR ELECTRICAL HOUSEHOLD APPLIANCES. | |
| AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE. PART 2: PARTICULAR REQUIREMENTS FOR ELECTRICALLY OPERATED DOOR LOCKS. | |
| AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE. PART 2: PARTICULAR REQUIREMENTS FOR ELECTRICALLY OPERATED WATER VALVES, INCLUDING MECHANICAL REQUIREMENTS. | |
| AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE. PART 2: PARTICULAR REQUIREMENTS FOR ENERGY REGULATORS. | |
| AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE. PART 2: PARTICULAR REQUIREMENTS FOR HUMIDITY SENSING CONTROLS. | |
| AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE. PART 2: PARTICULAR REQUIREMENTS FOR MOTOR STARTING RELAYS. | |
| AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE. PART 2: PARTICULAR REQUIREMENTS FOR TEMPERATURE SENSING CONTROLS. | |
| AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE. PART 2: PARTICULAR REQUIREMENTS FOR THERMAL MOTOR PROTECTORS FOR MOTO-COMPRESSORS OF HERMETIC AND SEMI-HERMETIC TYPE. | |
| AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE. PART 2: PARTICULAR REQUIREMENTS FOR THERMAL MOTOR PROTECTORS FOR MOTOR-COMPRESSORS OF HERMETIC AND SEMI-HERMETIC TYPE. | |
| AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE. PART 2: PARTICULAR REQUIREMENTS FOR THERMAL MOTOR PROTECTORS. | |
| AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE. PART 2: PARTICULAR REQUIREMENTS FOR THERMAL PROTECTORS FOR BALLASTS FOR TUBULAR FLUORESCENT LAMPS. | |
| AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE. PART 2: PARTICULAR REQUIREMENTS FOR TIMERS AND TIME SWITCHES. | |
| AUTOMATIC ELECTRICAL FOR HOUSEHOLD AND SIMILAR USE. PART 2: PARTICULAR REQUIREMENTS FOR AUTOMATIC ELECTRICAL WATER LEVEL OPERATING CONTROLS OF THE FLOAT TYPE FOR HOUSEHOLD AND SIMILAR APPLICATIONS. | |
| Cable networks for television signals, sound signals and interactive services - Part 14: Optical transmission systems using RFoG technology (Endorsed by AENOR in July of 2014.) | |
| Cable networks for television signals, sound signals and interactive services - Part 3-1: Methods of measurement of non-linearity for full digital channel load with DVB-C signals (Endorsed by AENOR in... | |
| Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable networks | |
| Cable networks for television signals, sound signals and interactive services - Part 5: Headend equipment (Endorsed by AENOR in June of 2016.) | |
| Cable networks for television signals, sound signals and interactive services - Part 5: Headend equipment | |
| Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment (Endorsed by AENOR in October of 2012.) | |
| Cable networks for television signals, sound signals and interactive services - Part 7-1: Hybrid Fibre Coax Outside Plant Status Monitoring - Physical (PHY) Layer Specification (Endorsed by AENOR in August... | |
| Cable networks for television signals, sound signals and interactive services - Part 7-3: Hybrid fibre coax outside plant status monitoring - Power supply to transponder interface bus (PSTIB) | |
| Cable networks for television signals, sound signals and interactive services -- Part 4: Passive wideband equipment for coaxial cable networks (Endorsed by AENOR in September of 2008.) | |
| Cable networks for television signals, sound signals and interactive services -- Part 6: Optical equipment | |
| Cable networks for television signals, sound signals and interactive services -- Part 7-1: Hybrid Fibre Coax Outside Plant Status Monitoring - Physical (PHY) Layer Specification (Endorsed by AENOR in May... | |
| Cable networks for television signals, sound signals and interactive services -- Part 7-2: Hybrid Fibre Coax Outside Plant Status Monitoring - Media access Control (MAC) Layer Specification (Endorsed by AENOR... | |
| Cable networks for television signals, sound signals and interactive services -- Part 7-3: Hybrid Fibre Coax Outside Plant Status Monitoring - Power supply to Transponder Interface Bus (PSTIB) Specification (Endorsed... | |
| CHARACTERISTICS AND TEST CONDITIONS OF RADIONUCLIDE IMAGING DEVICES; ANGER TYPE GAMMA CAMERAS. | |
| Corrigendum | |
| Discrete semiconductor devices -- Part 15: Isolated power semiconductor devices (Endorsed by AENOR in May of 2004.) | |
| Discrete semiconductor devices and integrated circuits - Part 5-1: Optoelectronic devices - General | |
| Discrete semiconductor devices and integrated circuits - Part 5-2: Optoelectronic devices - Essential ratings and characteristics | |
| Discrete semiconductor devices and integrated circuits - Part 5-3: Optoelectronic devices - Measuring methods | |
| Equipment for continuous monitoring radioactivity in gaseous effluents -- Part 1: General requirements (Endorsed by AENOR in March of 2005.) | |
| Equipment for continuous monitoring radioactivity in gaseous effluents -- Part 2: Specific requirements for aerosols monitors including transuranic aerosols (Endorsed by AENOR in March of 2005.) | |
| Equipment for continuous monitoring radioactivity in gaseous effluents -- Part 3: Specific requirements for radioactive noble gas monitors (Endorsed by AENOR in March of 2005.) | |
| Equipment for continuous monitoring radioactivity in gaseous effluents -- Part 4: Specific requirements for iodine monitors (Endorsed by AENOR in March of 2005.) | |
| Equipment for continuous monitoring radioactivity in gaseous effluents -- Part 5: Specific requirements for tritium monitors (Endorsed by AENOR in March of 2005.) | |
| Expression of performance of electrochemical analyzers -- Part 1: General | |
| Expression of performance of electrochemical analyzers -- Part 2: pH value | |
| Expression of performance of electrochemical analyzers -- Part 3: Electrolytic conductivity | |
| Hand-held motor-operated electric tools - Safety - Part 1: General requirements | |
| Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) | |
| Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws | |
| Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for planers | |
| Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for hedge trimmers | |
| Hand-held motor-operated electric tools - Safety - Part 2-17: Particular requirements for routers and trimmers | |
| Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for drills and impact drills | |
| Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for drain cleaners | |
| Hand-held motor-operated electric tools - Safety - Part 2-22: Particular requirements for cut-off machines | |
| Hand-held motor-operated electric tools - Safety - Part 2-23: Particular requirements for die grinders and small rotary tools | |
| Hand-held motor-operated electric tools - Safety - Part 2-2: Particular requirements for screwdrivers and impact wrenches | |
| Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders | |
| Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type | |
| Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws | |
| Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers | |
| Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for shears and nibblers | |
| Hand-held motor-operated electric tools - Safety - Part 2-9: Particular requirements for tappers | |
| Hand-held motor-operated electric tools - Safety -- Part 1: General requirements (IEC 60745-1:2006, modified) | |
| Hand-held motor-operated electric tools - Safety -- Part 1: General requirements | |
| Hand-held motor-operated electric tools - Safety -- Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) | |
| Hand-held motor-operated electric tools - Safety -- Part 2-12: Particular requirements for concrete vibrators | |
| Hand-held motor-operated electric tools - Safety -- Part 2-13: Particular requirements for chain saws (IEC 60745-2-13:2006, modified). | |
| Hand-held motor-operated electric tools - Safety -- Part 2-14: Particular requirements for planers (IEC 60745-2-14:2003/A1:2 006, modified). | |
| Hand-held motor-operated electric tools - Safety -- Part 2-14: Particular requirements for planers | |
| Hand-held motor-operated electric tools - Safety -- Part 2-15: Particular requirements for hedge trimmers (IEC 60745-2-15:2006, modified). | |
| Hand-held motor-operated electric tools - Safety -- Part 2-16: Particular requirements for tackers | |
| Hand-held motor-operated electric tools - Safety -- Part 2-17: Particular requirements for routers and trimmers | |
| Hand-held motor-operated electric tools - Safety -- Part 2-18: Particular requirements for strapping tools | |
| Hand-held motor-operated electric tools - Safety -- Part 2-18: Particular requirements of strapping tools | |
| Hand-held motor-operated electric tools - Safety -- Part 2-19: Particular requirements for jointers | |
| Hand-held motor-operated electric tools - Safety -- Part 2-1: Particular requirements for drills and impact drills | |
| Hand-held motor-operated electric tools - Safety -- Part 2-20: Particular requirements for band saws | |
| Hand-held motor-operated electric tools - Safety -- Part 2-21: Particular requirements for drain cleaners (IEC 60745-2-21:2002, modified). | |
| Hand-held motor-operated electric tools - Safety -- Part 2-2: Particular requirements for screwdrivers and impact wrenches | |
| Hand-held motor-operated electric tools - Safety -- Part 2-3: Particular requirements for grinders, polishers and disk-type sanders (IEC 60745-2-3:2006, modified). | |
| Hand-held motor-operated electric tools - Safety -- Part 2-3: Particular requirements for grinders, polishers and disk-type sanders | |
| Hand-held motor-operated electric tools - Safety -- Part 2-4: Particular requirements for sanders and polishers other than disk type | |
| Hand-held motor-operated electric tools - Safety -- Part 2-5: Particular requirements for circular saws (IEC 60745-2-5:2006). | |
| Hand-held motor-operated electric tools - Safety -- Part 2-5: Particular requirements for circular saws | |
| Hand-held motor-operated electric tools - Safety -- Part 2-6: Particular requirements for hammers (IEC 60745-2-6:2003/A1:20 06) | |
| Hand-held motor-operated electric tools - Safety -- Part 2-6: Particular requirements for hammers | |
| Hand-held motor-operated electric tools - Safety -- Part 2-8: Particular requirements for shears and nibblers | |
| Hand-held motor-operated electric tools - Safety -- Part 2-9: Particular requirements for tappers | |
| Hand-held motor-operated electric tools- Safety- Part 2-18: Particular requirements of strapping tools | |
| Hand-held motor-operated electric tools- Safety- Part 2-9: Particular requirements for tappers | |
| HARD WATER TO BE USED FOR TESTING THE PERFORMANCE OF SOME HOUSEHOLD ELECTRICAL APPLIANCES. | |
| Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS -- Part 2: FM audio recording (Endorsed by AENOR in December of 2001.) | |
| Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS -- Part 4: S-VHS video cassette system - ET-mode (Endorsed by AENOR in July of... | |
| Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS -- Part 5: D-VHS (Endorsed by AENOR in December of 2004.) | |
| HELICAL-SCAN VIDEO TAPE CASSETTE SYSTEM USING 12,65 MM (0,5 IN) MAGNETIC TAPE ON TYPE VHS. PART 1: VHS AND COMPACT VHS VIDEO CASSETTE SYSTEM. | |
| HELICAL-SCAN VIDEO TAPE CASSETTE SYSTEM USING 12,65 MM (0,5 IN) MAGNETIC TAPE ON TYPE VHS. PART 3: S-VHS. | |
| Household electrical appliances - Performance - Hard water for testing | |
| Household electrical appliances - Performance - Water for testing | |
| Industrial electroheat equipment - Test methods for electroslag remelting furnaces (Endorsed by AENOR in February of 2006.) | |
| INDUSTRIAL PLATINIUM RESISTANCE THERMOMETER SENSORS. | |
| INDUSTRIAL PLATINUM RESISTANCE THERMOMETER SENSORS. | |
| Industrial platinum resistance thermometers and platinum temperature sensors (Endorsed by AENOR in February of 2009.) | |
| ISOLATING TRANSFORMERS AND SAFETY ISOLATING TRANSFORMERS. REQUIREMENTS. | |
| Laminated pressboard for electrical purposes -- Part 1: Definitions, classification and general requirements (Endorsed by AENOR in May of 2011.) | |
| Laminated pressboard for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 1: Requirements for laminated precompressed pressboard, Types LB 3.1A.1 and 3.1A.2 (Endorsed by AENOR in May... | |
| Laminations for transformers and inductors - Part 1: Mechanical and electrical characteristics | |
| Live working - Terminology for tools, devices and equipment | |
| Live working - Terminology for tools, equipment and devices | |
| MEASURING METHODS FOR VIDEO TAPE PROPERTIES. | |
| Medical electrical equipment - Characteristics and test conditions of radionuclide imaging devices - Anger type gamma cameras (IEC 60789:2005) | |
| Medical electrical equipment - Dosimeters with ionization chambers as used in radiotherapy (Endorsed by AENOR in January of 2003.) | |
| Medical electrical equipment - Dosimeters with ionization chambers as used in radiotherapy (Endorsed by AENOR in June of 2012.) | |
| Medical electrical equipment - Dosimeters with ionization chambers as used in radiotherapy (Endorsed by Asociación Española de Normalización in September of 2022.) | |
| MEDICAL ELECTRICAL EQUIPMENT. DOSIMETERS WITH IONIZATION CHAMBERS AS USED IN RADIOTHERAPY (Endorsed by AENOR in June of 2000.) | |
| NON-BROADCAST VIDEO TAPE RECORDERS. TIME BASE STABILITY. (Endorsed by AENOR in December of 1995.) | |
| Nuclear facilities - Electrical equipment important to safety - Qualification (Endorsed by Asociación Española de Normalización in November of 2017.) | |
| Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidance | |
| Optical fibres - Part 1-20: Measurement methods and test procedures - Fibre geometry | |
| Optical fibres - Part 1-31: Measurement methods and test procedures - Tensile strength | |
| Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippability | |
| Optical fibres - Part 1-33: Measurement methods and test procedures - Stress corrosion susceptibility | |
| Optical fibres - Part 1-34: Measurement methods and test procedures - Fibre curl | |
| Optical fibres - Part 1-40: Measurement methods and test procedures - Attenuation | |
| Optical fibres - Part 1-42: Measurement methods and test procedures - Chromatic dispersion (Endorsed by AENOR in May of 2013.) | |
| Optical fibres - Part 1-42: Measurement methods and test procedures - Chromatic dispersion (Endorsed by AENOR in October of 2007.) | |
| Optical fibres - Part 1-43: Measurement methods and test procedures - Numerical aperture measurement | |
| Optical fibres - Part 1-43: Measurement methods and test procedures - Numerical aperture | |
| Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength (Endorsed by AENOR in October of 2011.) | |
| Optical fibres - Part 1-45: Measurement methods and test procedures - Mode field diameter | |
| Optical fibres - Part 1-47: Measurement methods and test procedures - Macrobending loss (Endorsed by AENOR in October of 2007.) | |
| Optical fibres - Part 1-47: Measurement methods and test procedures - Macrobending loss | |
| Optical fibres - Part 1-48: Measurement methods and test procedures - Polarization mode dispersion (Endorsed by Asociación Española de Normalización in June of 2019.) | |
| Optical fibres - Part 1-48: Measurement methods and test procedures - Polarization mode dispersion | |
| Optical fibres - Part 1-49: Measurement methods and test procedures - Differential mode delay | |
| Optical fibres - Part 1-50: Measurement methods - Damp heat (steady state) tests | |
| Optical fibres - Part 1-50: Measurement methods and test procedures - Damp heat (steady state) | |
| Optical fibres - Part 1-51: Measurement methods and test procedures - Dry heat (steady state) tests | |
| Optical fibres - Part 1-51: Measurement methods and test procedures - Dry heat | |
| Optical fibres - Part 1-52: Measurement methods and test procedures - Change of temperature tests | |
| Optical fibres - Part 1-52: Measurement methods and test procedures - Change of temperature | |
| Optical fibres - Part 1-53: Measurement methods and test procedures - Water immersion tests | |
| Optical fibres - Part 1-53: Measurement methods and test procedures - Water immersion | |
| Optical fibres - Part 1-54: Measurement methods and test procedures - Gamma irradiation (Endorsed by AENOR in March of 2013.) | |
| Optical fibres - Part 1-60: Measurement methods and test procedures - Beat length (Endorsed by Asociación Española de Normalización in December of 2018.) | |
| Optical fibres - Part 1-61: Measurement methods and test procedures - Polarization crosstalk (Endorsed by Asociación Española de Normalización in December of 2018.) | |
| Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibre (Endorsed by AENOR in April of 2016.) | |
| Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres (Endorsed by Asociación Española de Normalización in December of 2017.) | |
| Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres | |
| Optical fibres - Part 2-20: Product specifications - Sectional specification for category A2 multimode fibres (Endorsed by AENOR in April of 2016.) | |
| Optical fibres - Part 2-20: Product specifications - Sectional specification for category A2 multimode fibres | |
| Optical fibres - Part 2-30: Product specifications - Sectional specification for category A3 multimode fibres (Endorsed by AENOR in March of 2013.) | |
| Optical fibres - Part 2-30: Product specifications - Sectional specification for category A3 multimode fibres (Endorsed by AENOR in November of 2015.) | |
| Optical fibres - Part 2: Product specifications - General (Endorsed by AENOR in April of 2012.) | |
| Optical fibres - Part 2: Product specifications - General (Endorsed by AENOR in July of 2016.) | |
| Optical fibres -- Part 1-1: Measurement methods and test procedures - General and guidance (Endorsed by AENOR in March of 2003.) | |
| Optical fibres -- Part 1-21: Measurement methods and test procedures - Coating geometry (Endorsed by AENOR in August of 2002.) | |
| Optical fibres -- Part 1-22: Measurement methods and test procedures - Length measurement (Endorsed by AENOR in August of 2002.) | |
| Optical fibres -- Part 1-30: Measurement methods and test procedures - Fibre proof test (Endorsed by AENOR in July of 2002.) | |
| Optical fibres -- Part 1-30: Measurement methods and test procedures - Fibre proof test (Endorsed by AENOR in June of 2011.) | |
| Optical fibres -- Part 1-31: Measurement methods and test procedures - Tensile strength (Endorsed by AENOR in July of 2002.) | |
| Optical fibres -- Part 1-32: Measurement methods and test procedures - Coating strippability (Endorsed by AENOR in April of 2004.) | |
| Optical fibres -- Part 1-34: Measurement methods and test procedures - Fibre curl (Endorsed by AENOR in July of 2002.) | |
| Optical fibres -- Part 1-41: Measurement methods and test procedures - Bandwidth (Endorsed by AENOR in April of 2004.) | |
| Optical fibres -- Part 1-41: Measurement methods and test procedures - Bandwidth (Endorsed by AENOR in January of 2011.) | |
| Optical fibres -- Part 1-41: Measurement methods and test procedures - Bandwidth (Endorsed by AENOR in July of 2002.) | |
| Optical fibres -- Part 1-42: Measurement methods and test procedures - Chromatic dispersion (Endorsed by AENOR in July of 2002.) | |
| Optical fibres -- Part 1-44: Measurement methods and test procedures - Cut-off wavelength (Endorsed by AENOR in July of 2002.) | |
| Optical fibres -- Part 1-46: Measurement methods and test procedures - Monitoring of changes in optical transmittance (Endorsed by AENOR in July of 2002.) | |
| Optical fibres -- Part 1-47: Measurement methods and test procedures - Macrobending loss (Endorsed by AENOR in July of 2002.) | |
| Optical fibres -- Part 1-48: Measurement methods and test procedures - Polarization mode dispersion (Endorsed by AENOR in April of 2004.) | |
| Optical fibres -- Part 1-49: Measurement methods and test procedures - Differential mode delay (Endorsed by AENOR in April of 2004.) | |
| Optical fibres -- Part 1-54: Measurement methods and test procedures - Gamma irradiation (Endorsed by AENOR in June of 2004.) | |
| Optical fibres -- Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres (Endorsed by AENOR in April of 2005.) | |
| Optical fibres -- Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres (Endorsed by AENOR in August of 2002.) | |
| Optical fibres -- Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres (IEC 60793-2-10:2007). (Endorsed by AENOR in March of 2008.) | |
| Optical fibres -- Part 2-20: Product specifications - Sectional specification for category A2 multimode fibres (Endorsed by AENOR in August of 2002.) | |
| Optical fibres -- Part 2-30: Product specifications - Sectional specification for category A3 multimode fibres (Endorsed by AENOR in August of 2002.) | |
| Optical fibres -- Part 2-30: Product specifications - Sectional specification for category A3 multimode fibres (Endorsed by AENOR in July of 2009.) | |
| Optical fibres -- Part 2-40: Product specifications - Sectional specification for category A4 multimode fibres (Endorsed by AENOR in August of 2002.) | |
| Optical fibres -- Part 2-40: Product specifications - Sectional specification for category A4 multimode fibres (IEC 60793-2-40:2006 ) (Endorsed by AENOR in August of 2006.) | |
| Optical fibres -- Part 2: Product specification. General. (Endorsed by AENOR in June of 2004.) | |
| Optical fibres -- Part 2: Product specifications - General (Endorsed by AENOR in July of 2008.) | |
| Semiconductor devices - Discrete devices - Part 15: Isolated power semiconductor devices (Endorsed by AENOR in June of 2012.) | |
| Semiconductor devices - Discrete devices - Part 5-5: Optoelectronic devices - Photocouplers (Endorsed by AENOR in May of 2015.) | |
| Semiconductor devices - Discrete devices - Part 5-5: Optoelectronic devices - Photocouplers | |
| Semiconductor devices - Mechanical and climatic test methods - Part 12: Vibration, variable frequency | |
| Semiconductor devices - Mechanical and climatic test methods - Part 13: Salt atmosphere | |
| Semiconductor devices - Mechanical and climatic test methods - Part 15: Resistance to soldering temperature for through-hole mounted devices | |
| Semiconductor devices - Mechanical and climatic test methods - Part 17: Neutron irradiation | |
| Semiconductor devices - Mechanical and climatic test methods - Part 18: Ionizing radiation (total dose) | |
| Semiconductor devices - Mechanical and climatic test methods - Part 20: Resistance of plastic encapsulated SMDs to the combined effect of moisture and soldering heat | |
| Semiconductor devices - Mechanical and climatic test methods - Part 21: Solderability (Endorsed by AENOR in November of 2011.) | |
| Semiconductor devices - Mechanical and climatic test methods - Part 26: Electrostatic discharge (ESD) sensitivity testing - Human body model (HBM) (Endorsed by AENOR in July of 2014.) | |
| Semiconductor devices - Mechanical and climatic test methods - Part 26: Electrostatic discharge (ESD) sensitivity testing - Human body model (HBM) | |
| Semiconductor devices - Mechanical and climatic test methods - Part 27: Electrostatic discharge (ESD) sensitivity testing - Machine model (MM) (Endorsed by AENOR in January of 2013.) | |
| Semiconductor devices - Mechanical and climatic test methods - Part 28: Electrostatic discharge (ESD) sensitivity testing - Charged device model (CDM) - device level (Endorsed by Asociación Española de Normalización... | |
| Semiconductor devices - Mechanical and climatic test methods - Part 29: Latch-up test (Endorsed by AENOR in November of 2011.) | |
| Semiconductor devices - Mechanical and climatic test methods - Part 30: Preconditioning of non-hermetic surface mount devices prior to reliability testing | |
| Semiconductor devices - Mechanical and climatic test methods - Part 39: Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components | |
| Semiconductor devices - Mechanical and climatic test methods - Part 3: External visual examination (Endorsed by Asociación Española de Normalización in July of 2017.) | |
| Semiconductor devices - Mechanical and climatic test methods - Part 3: External visual examination | |
| Semiconductor devices - Mechanical and climatic test methods - Part 40: Board level drop test method using a strain gauge (Endorsed by AENOR in November of 2011.) | |
| Semiconductor devices - Mechanical and climatic test methods - Part 42: Temperature and humidity storage (Endorsed by AENOR in November of 2014.) | |
| Semiconductor devices - Mechanical and climatic test methods - Part 43: Guidelines for IC reliability qualification plans (Endorsed by Asociación Española de Normalización in October of 2017.) | |
| Semiconductor devices - Mechanical and climatic test methods - Part 44: Neutron beam irradiated single event effect (SEE) test method for semiconductor devices (Endorsed by AENOR in December of 2016.)... | |
| Semiconductor devices - Mechanical and climatic test methods - Part 4: Damp heat, steady state, highly accelerated stress test (HAST) (Endorsed by Asociación Española de Normalización in July of 2017.)... | |
| Semiconductor devices - Mechanical and climatic test methods - Part 4: Damp heat, steady state, highly accelerated stress test (HAST) | |
| Semiconductor devices - Mechanical and climatic test methods - Part 5: Steady-state temperature humidity bias life test (Endorsed by Asociación Española de Normalización in August of 2017.) | |
| Semiconductor devices - Mechanical and climatic test methods - Part 5: Steady-state temperature humidity bias life test | |
| Semiconductor devices - Mechanical and climatic test methods - Part 6: Storage at high temperature (Endorsed by Asociación Española de Normalización in July of 2017.) | |
| Semiconductor devices - Mechanical and climatic test methods - Part 6: Storage at high temperature | |
| Semiconductor devices - Mechanical and climatic test methods - Part 7: Internal moisture content measurement and the analysis of other residual gases (Endorsed by AENOR in December of 2011.) | |
| Semiconductor devices - Mechanical and climatic test methods - Part 9: Permanence of marking (Endorsed by Asociación Española de Normalización in July of 2017.) | |
| Semiconductor devices - Mechanical and climatic test methods - Part 9: Permanence of marking | |
| Semiconductor devices - Mechanical and climatic test methods -- Part 10: Mechanical shock. | |
| Semiconductor devices - Mechanical and climatic test methods -- Part 11: Rapid change of temperature - Two-fluid-bath method. | |
| Semiconductor devices - Mechanical and climatic test methods -- Part 14: Robustness of terminations (lead integrity) | |
| Semiconductor devices - Mechanical and climatic test methods -- Part 15: Resistance to soldering temperature for through-hole mounted devices | |
| Semiconductor devices - Mechanical and climatic test methods -- Part 19: Die shear strength | |
| Semiconductor devices - Mechanical and climatic test methods -- Part 1: General | |
| Semiconductor devices - Mechanical and climatic test methods -- Part 20-1: Handling, packing, labelling and shipping of surface mount devices sensitive to the combined effect of moisture and soldering heat... | |
| Semiconductor devices - Mechanical and climatic test methods -- Part 20: Resistance of plastic-encapsulated SMDs to the combined effect of moisture and soldering heat | |
| Semiconductor devices - Mechanical and climatic test methods -- Part 21: Solderability (Endorsed by AENOR in August of 2005.) | |
| Semiconductor devices - Mechanical and climatic test methods -- Part 22: Bond strength | |
| Semiconductor devices - Mechanical and climatic test methods -- Part 23: High temperature operating life | |
| Semiconductor devices - Mechanical and climatic test methods -- Part 24: Accelerated moisture resistance - Unbiased HAST | |
| Semiconductor devices - Mechanical and climatic test methods -- Part 25: Temperature cycling | |
| Semiconductor devices - Mechanical and climatic test methods -- Part 27: Electrostatic discharge (ESD) sensitivity testing - Machine model (MM) (IEC 60749-27:2006) (Endorsed by AENOR in November of 2006.) | |
| Semiconductor devices - Mechanical and climatic test methods -- Part 29: Latch-up test | |
| Semiconductor devices - Mechanical and climatic test methods -- Part 2: Low air pressure. | |
| Semiconductor devices - Mechanical and climatic test methods -- Part 31: Flammability of plastic-encapsulated devices (internally induced) | |
| Semiconductor devices - Mechanical and climatic test methods -- Part 32: Flammability of plastic-encapsulated devices (externally induced) | |
| Semiconductor devices - Mechanical and climatic test methods -- Part 33: Accelerated moisture resistance - Unbiased autoclave | |
| Semiconductor devices - Mechanical and climatic test methods -- Part 34: Power cycling | |
| Semiconductor devices - Mechanical and climatic test methods -- Part 35: Acoustic microscopy for plastic encapsulated electronic components (IEC 60749-35:2006) (Endorsed by AENOR in January of 2007.) | |
| Semiconductor devices - Mechanical and climatic test methods -- Part 36: Acceleration, steady state | |
| Semiconductor devices - Mechanical and climatic test methods -- Part 37: Board level drop test method using an accelerometer (Endorsed by AENOR in July of 2008.) | |
| Semiconductor devices - Mechanical and climatic test methods -- Part 7: Internal moisture content measurement and the analysis of other residual gases. | |
| Semiconductor devices - Mechanical and climatic test methods -- Part 8: Sealing | |
| Semiconductor devices - Mechanical and climatic test methods. | |
| Semiconductor devices - Mechanical and climatic test methods | |
| Semiconductor devices - Part 16-1: Microwave integrated circuits - Amplifiers (Endorsed by Asociación Española de Normalización in July of 2017.) | |
| Semiconductor devices - Part 16-3: Microwave integrated circuits - Frequency converters (Endorsed by Asociación Española de Normalización in January of 2018.) | |
| Semiconductor devices - Part 16-4: Microwave integrated circuits - Switches (Endorsed by Asociación Española de Normalización in December of 2017.) | |
| Semiconductor devices - Part 16-5: Microwave integrated circuits - Oscillators (Endorsed by AENOR in October of 2013.) | |
| Semiconductor devices - Part 16-5: Microwave integrated circuits - Oscillators (Endorsed by Asociación Española de Normalización in October of 2020.) | |
| Semiconductor devices -- Part 16-10: Technology Approval Schedule (TAS) for monolithic microwave integrated circuits (Endorsed by AENOR in November of 2004.) | |
| Semiconductor devices -- Part 16-1: Microwave integrated circuits - Amplifiers (Endorsed by AENOR in July of 2002.) | |
| Semiconductor devices -- Part 16-1: Microwave integrated circuits - Amplifiers (IEC 60747-16-1:2001/A1:2 007). (Endorsed by AENOR in May of 2007.) | |
| Semiconductor devices -- Part 16-3: Microwave integrated circuits - Frequency converters (Endorsed by AENOR in July of 2009.) | |
| Semiconductor devices -- Part 16-3: Microwave integrated circuits - Frequency converters. (Endorsed by AENOR in December of 2002.) | |
| Semiconductor devices -- Part 16-4: Microwave integrated circuits - Switches (Endorsed by AENOR in April of 2011.) | |
| Semiconductor devices -- Part 16-4: Microwave integrated circuits - Switches (Endorsed by AENOR in November of 2004.) | |
| Semiconductor devices- Mechanical and climatic test methods- Part 38: Soft error test method for semiconductor devices with memory (Endorsed by AENOR in September of 2008.) | |
| Semiconductor devices. Mechanical and climatic test methods. Part 16: Particle impact noise detection (PIND) | |
| Specification for laminated pressboard - Part 2: Methods of test (Endorsed by AENOR in July of 2007.) | |
| Specification for laminated pressboard - Part 2: Methods of test (Endorsed by Asociación Española de Normalización in February of 2024.) | |
| SPECIFICATION FOR LAMINATED PRESSBOARD. PART 1: DEFINITIONS, CLASSIFICATION AND GENERAL REQUIREMENTS. | |
| SPECIFICATION FOR LAMINATED PRESSBOARD. PART 2: METHODS OF TEST. | |
| SPECIFICATION FOR LAMINATED PRESSBOARD. PART 3: SPECIGICATIONS FOR INDIVIDUAL MATERIALS. SHEET 1: SPECIFICATIONS FOR LAMINATED PRECOMPRESSED BOARD. TYPES LB 3.1.1, 3.1.2, 3.3.1, AND 3.3.2. | |
| Synthetic quartz crystal - Specifications and guide to the use (Endorsed by AENOR in July of 2005.) | |
| Synthetic quartz crystal - Specifications and guidelines for use (Endorsed by AENOR in March of 2009.) | |
| Synthetic Quartz Crystal - Specifications and guidelines for use (Endorsed by AENOR in November of 2016.) | |
| TERMINOLOGY FOR TOOLS AND EQUIPMENT TO BE USED IN LIVE WORKING. | |
| Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content | |
| Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity | |
| Thermistors - Directly heated positive step-function temperature coefficient - Part 1-1: Blank detail specification - Current limiting application - Assessment level EZ | |
| Thermistors - Directly heated positive step-function temperature coefficient -- Part 1-2: Blank detail specification - Heating element application - Assessment level EZ. | |
| Thermistors - Directly heated positive step-function temperature coefficient -- Part 1-3: Blank detail specification - Inrush current application - Assessment level EZ. | |
| Thermistors - Directly heated positive step-function temperature coefficient -- Part 1-4: Blank detail specification - Sensing application - Assessment level EZ. | |
| Thermistors - Directly heated positive step-function temperature coefficient -- Part 1: Generic specification. | |
| Thermistors - Directly heated positive temperature coefficient -- Part 1: Generic specification (IEC 60738-1:2006) | |
| Thermistors - Directly heated positive temperature coefficient -- Part 1: Generic specification | |
| Thermistors- Directly heated positive step-function temperature coefficient- Part 1-2: Blank detail specification- Heating element application- Assessment level EZ | |
| Thermistors- Directly heated positive step-function temperature coefficient- Part 1-3: Blank detail specification- Inrush current application- Assessment level EZ | |
| Thermistors- Directly heated positive step-function temperature coefficient- Part 1-4: Blank detail specification- Sensing application- Assessment level EZ | |
| Thermistors. Directly heated positive step-function temperature coefficient. Part 1-1: Blank detail specification. Current limiting application. Assessment level EZ. | |
| Transmitters for use in industrial-process control systems - Part 1: Methods for performance evaluation | |
| Transmitters for use in industrial-process control systems - Part 2: Methods for inspection and routine testing | |
| Transmitters for use in industrial-process control systems - Part 3: Methods for performance evaluation of intelligent transmitters (Endorsed by AENOR in October of 2014.) | |
| Transmitters for use in industrial-process control systems - Part 3: Methods for performance evaluation of intelligent transmitters | |
| Transmitters for use in industrial-process control systems -- Part 1: Methods for performance evaluation (Endorsed by AENOR in May of 2001.) | |
| Transmitters for use in industrial-process control systems -- Part 2: Methods for inspection and routine testing (Endorsed by AENOR in July of 2003.) | |
| UNE-EN 60730-1/A14:1997 |
| << Prev | Next >> |