AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
60
70
80
90
100
110
120
121
122
123
124
125
126
127
128
129
130
131
132
140
150
160
170
180
| Product Name | Notes |
|---|---|
| ACCEPTANCE INSPECTION OF CLASS 2 ALTERNATING-CURRENT WATTHOUR METERS. | |
| Aerospace series - Bearing, spherical, plain, in corrosion resisting steel - Narrow series - Dimensions and loads - Inch series (Endorsed by Asociación Española de Normalización in May of 2020.)... | |
| Aerospace series - Collar, swage locking, shear type, in aluminium alloy 3003, conversion coating - Inch series (Endorsed by Asociación Española de Normalización in February of 2026.) | |
| Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 001: Technical specification (Endorsed by AENOR in July of 2015.) | |
| Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 001: Technical specification (Endorsed by Asociación Española de Normalización in October of 2018.) | |
| Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 002: General and list of product standards (Endorsed by AENOR in May of 2010.) | |
| Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 003: Braided, tubular, expandable - Product standard (Endorsed by AENOR in October of 2009.) | |
| Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 003: Braided, tubular, expandable - Product standard (Endorsed by Asociación Española de Normalización in October of... | |
| Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 004: Braided, tubular, high expandable - Product standard (Endorsed by Asociación Española de Normalización in October... | |
| Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 005: Sleeve flexible, post installation - Product standard (Endorsed by AENOR in February of 2015.) | |
| Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 005: Sleeve flexible, post installation - Product standard (Endorsed by Asociación Española de Normalización in January... | |
| Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 006: Self-wrapping protective sleeve, flexible post installation - Product standard (Endorsed by AENOR in April of... | |
| Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 007: Self-wrapping protective sleeve, flexible post installation operating temperature from - 55 °C to 260 °C... | |
| Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 008: Self-wrapping shielded (EMI) protective sleeve with nickel copper braid, flexible post installation operating temperature from... | |
| Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 009: Self-wrapping fire protection sleeve, flexible, post installation, operating temperature from -55 °C to 260 °C... | |
| Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 009: Self-wrapping fire protection sleeve, flexible, post-installation, operating temperature from -55 °C to 260 °C -... | |
| Aerospace series - Electrical cables, installation - Protective sleeves in meta-aramid fibres - Part 008: Self-wrapping shielded (EMI) protective sleeve with nickel copper braid, flexible post installation operating temperature from... | |
| Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC) (Endorsed by Asociación Española de Normalización in March of 2018.) | |
| Aerospace series - Organic compounds - Test method - Analysis by infrared spectroscopy (Endorsed by Asociación Española de Normalización in February of 2024.) | |
| Aerospace series - Pin, close tolerance, swage locking, 100° countersunk reduced head, shear type, in aluminium alloy 7050, conversion coating - Inch series (Endorsed by Asociación Española de Normalización in... | |
| Aerospace series - Rivet-collar-system, aluminium alloy, shear type, inch series - Technical Specification (Endorsed by Asociación Española de Normalización in December of 2022.) | |
| Aluminium and aluminium alloys - Cast forging stock - Part 1: Technical conditions for inspection and delivery | |
| Aluminium and aluminium alloys - Cast forging stock - Part 2: Tolerances on dimensions and form | |
| Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems | |
| Artificial pollution tests on high-voltage insulators to be used on a.c. systems | |
| Barrel thread for lampholders with shade holder ring | |
| Basic and safety principles for man-machine interface, marking and identification - Actuating principles (Endorsed by AENOR in July of 2004.) | |
| Basic and safety principles for man-machine interface, marking and identification - Identification of conductors by colours or alphanumerics (IEC 60446:2007). | |
| Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals and conductor terminations (IEC 60445:2006, modified). | |
| Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals and of terminations of certain designated conductors, including general rules for an alphanumeric system. | |
| Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors (Endorsed by Asociación Española de Normalización in December of 2017.) | |
| Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors | |
| BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION. IDENTIFICATION OF CONDUCTORS BY COLOURS OR NUMERALS. | |
| Cassettes for medical X-ray diagnosis - Radiographic cassettes and mammographic cassettes | |
| CLASS 0,5, 1 AND 2 ALTERNATING-CURRENT WATTHOUR METERS. | |
| Clothes washing machines for household use - Methods for measuring the performance. | |
| Clothes washing machines for household use - Methods for measuring the performance | |
| Clothes washing machines for household use - Methods of measuring the performance | |
| CLOTHES WASHING MACHINES FOR HOUSEHOLD USE. METHODS FOR MEASURING THE PERFORMANCE. | |
| Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings. | |
| CONDUITS FOR ELECTRICAL PURPOSES. OUTSIDE DIAMETERS OF CONDUITS FOR ELECTRICAL INSTALLATIONS AND THREADS FOR CONDUITS AND FITTINGS. | |
| Connectors for electronic equipment - Test and measurement -- Part 23-4: Screening and filtering tests - Test 23d: Transmission line reflections in the time domain. | |
| Connectors for electronic equipment - Tests and measurement -- Part 11-13: Climatic tests - Test 11n: Gas tightness, solderless wrapped connections. | |
| Connectors for electronic equipment - Tests and measurement -- Part 25-3: Test 25c - Rise time degradation. | |
| Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications | |
| Connectors for electronic equipment - Tests and measurements - Part 1-1: General examination - Test 1a: Visual examination. | |
| Connectors for electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial) | |
| Connectors for electronic equipment - Tests and measurements - Part 16-21: Mechanical tests on contacts and terminations - Test 16u: Whisker test via the application of external mechanical stresses (Endorsed... | |
| Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation (Endorsed by AENOR in September of 2011.)... | |
| Connectors for electronic equipment - Tests and measurements - Part 1: General | |
| Connectors for electronic equipment - Tests and measurements - Part 24-1: Magnetic interference tests - Test 24a: Residual magnetism (Endorsed by AENOR in January of 2013.) | |
| Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g... | |
| Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 MHz on IEC 60603-7 series connectors - Tests 27a to 27g (Endorsed by... | |
| Connectors for electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 1 000 MHz on IEC 60603-7 and IEC 61076-3 series connectors - Tests 28a... | |
| Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g (Endorsed by AENOR... | |
| Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact (Endorsed by AENOR in April of 2012.) | |
| Connectors for electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever (Endorsed by AENOR in September of 2011.)... | |
| Connectors for electronic equipment - Tests and measurements - Part 9-2: Endurance tests - Test 9b: Electrical load and temperature (Endorsed by AENOR in April of 2012.) | |
| Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging/separating ) with electrical load (Endorsed by AENOR in October of 2011.)... | |
| Connectors for electronic equipment - Tests and measurements - Part 9-4: Endurance tests - Test 9d: Durability of contact retention system and seals (maintenance, ageing) (Endorsed by AENOR in September... | |
| Connectors for electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic | |
| Connectors for electronic equipment - Tests and measurements - Part 99-001: Test schedule for engaging and separating connectors under electrical load - Test 99a: Connectors used in twisted pair communication... | |
| Connectors for electronic equipment - Tests and measurements -- Part 1-100: General - Applicable publications (IEC 60512-1-100:2006) | |
| Connectors for electronic equipment - Tests and measurements -- Part 1-100: General - Applicable publications. | |
| Connectors for electronic equipment - Tests and measurements -- Part 1-2: General examination - Test 1b: Examination of dimension and mass. | |
| Connectors for electronic equipment - Tests and measurements -- Part 10-4: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests - Test 10d: Electrical overload... | |
| Connectors for electronic equipment - Tests and measurements -- Part 11- 7: Climatic tests - Test 11g: Flowing mixed gas corrosion test | |
| Connectors for electronic equipment - Tests and measurements -- Part 11-10: Climatic tests - Test 11j: Cold. | |
| Connectors for electronic equipment - Tests and measurements -- Part 11-11: Climatic tests - Test 11k: Low air pressure. | |
| Connectors for electronic equipment - Tests and measurements -- Part 11-12: Climatic tests - Test 11m: Damp heat, cyclic. | |
| Connectors for electronic equipment - Tests and measurements -- Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test | |
| Connectors for electronic equipment - Tests and measurements -- Part 11-2: Climatic tests - Test 11b: Combined/sequential cold, low air pressure and damp heat. | |
| Connectors for electronic equipment - Tests and measurements -- Part 11-3: Climatic tests - Test 11c: Damp heat, steady state. | |
| Connectors for electronic equipment - Tests and measurements -- Part 11-4: Climatic tests - Test 11d: Rapid change of temperature. | |
| Connectors for electronic equipment - Tests and measurements -- Part 11-5: Climatic tests - Test 11e: Mould growth. | |
| Connectors for electronic equipment - Tests and measurements -- Part 11-6: Climatic tests - Test 11f: Corrosion, salt mist. | |
| Connectors for electronic equipment - Tests and measurements -- Part 11-9: Climatic tests - Test 11i: Dry heat. | |
| Connectors for electronic equipment - Tests and measurements -- Part 12-1: Soldering tests - Test 12a: Solderability, wetting, solder bath method (IEC 60512-12-1:2006). | |
| Connectors for electronic equipment - Tests and measurements -- Part 12-2: Soldering tests - Test 12b: Solderability, wetting, soldering iron method. (IEC 60512-12-2:2006) | |
| Connectors for electronic equipment - Tests and measurements -- Part 12-2: Soldering tests - Test 12b: Solderability, wetting, soldering iron method | |
| Connectors for electronic equipment - Tests and measurements -- Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting (IEC 60512-12-3:2006). | |
| Connectors for electronic equipment - Tests and measurements -- Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting | |
| Connectors for electronic equipment - Tests and measurements -- Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method (IEC 60512-12-4:2006). | |
| Connectors for electronic equipment - Tests and measurements -- Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method | |
| Connectors for electronic equipment - Tests and measurements -- Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method (IEC 60512-12-5:2006). | |
| Connectors for electronic equipment - Tests and measurements -- Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method | |
| Connectors for electronic equipment - Tests and measurements -- Part 12-7: Soldering tests - Test 12g: Solderability, wetting balance method. | |
| Connectors for electronic equipment - Tests and measurements -- Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces (IEC 60512-13-1:2006) | |
| Connectors for electronic equipment - Tests and measurements -- Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces | |
| Connectors for electronic equipment - Tests and measurements -- Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces (IEC 60512-13-2:2006) | |
| Connectors for electronic equipment - Tests and measurements -- Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces | |
| Connectors for electronic equipment - Tests and measurements -- Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method (IEC 60512-13-5:2006). | |
| Connectors for electronic equipment - Tests and measurements -- Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method | |
| Connectors for electronic equipment - Tests and measurements -- Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage (IEC 60512-14-2:2006). | |
| Connectors for electronic equipment - Tests and measurements -- Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof (IEC 60512-14-4:2006). | |
| Connectors for electronic equipment - Tests and measurements -- Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure (IEC 60512-14-5:2006). | |
| Connectors for electronic equipment - Tests and measurements -- Part 14-6: Sealing tests - Test 14f: Interfacial sealing (IEC 60512-14-6:2006). | |
| Connectors for electronic equipment - Tests and measurements -- Part 15-1: Connector tests (mechanical) - Test 15a: Contact retention in insert (Endorsed by AENOR in December of 2008.) | |
| Connectors for electronic equipment - Tests and measurements -- Part 15-3: Connector tests (mechanical) - Test 15c: Insert retention in housing (torsional) (Endorsed by AENOR in December of 2008.) | |
| Connectors for electronic equipment - Tests and measurements -- Part 15-4: Connector tests (mechanical) - Test 15d: Contact insertion, release and extraction force (Endorsed by AENOR in December of 2008.)... | |
| Connectors for electronic equipment - Tests and measurements -- Part 15-5: Connector tests (mechanical) - Test 15e: Contact retention in insert, cable nutation (Endorsed by AENOR in December of 2008.)... | |
| Connectors for electronic equipment - Tests and measurements -- Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices (Endorsed by AENOR in December of 2008.) | |
| Connectors for electronic equipment - Tests and measurements -- Part 15-7: Connector tests (mechanical) - Test 15g: Robustness of protective cover attachment (Endorsed by AENOR in December of 2008.) | |
| Connectors for electronic equipment - Tests and measurements -- Part 16-11: Mechanical tests on contacts and terminations - Test 16k: Stripping force, solderless wrapped connections (Endorsed by AENOR in November... | |
| Connectors for electronic equipment - Tests and measurements -- Part 16-13: Mechanical tests on contacts and terminations - Test 16m: Un-wrapping, solderless wrapped connections (Endorsed by AENOR in November of... | |
| Connectors for electronic equipment - Tests and measurements -- Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male tabs (Endorsed by AENOR in February... | |
| Connectors for electronic equipment - Tests and measurements -- Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male tabs (Endorsed by AENOR in February... | |
| Connectors for electronic equipment - Tests and measurements -- Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs (Endorsed by AENOR... | |
| Connectors for electronic equipment - Tests and measurements -- Part 16-18: Mechanical tests on contacts and terminations - Test 16r: Deflection of contacts, simulation (Endorsed by AENOR in November of... | |
| Connectors for electronic equipment - Tests and measurements -- Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Probe damage (Endorsed by AENOR in November of 2008.) | |
| Connectors for electronic equipment - Tests and measurements -- Part 16-2: Mechanical tests on contacts and terminations - Test 16b: Restricted entry (Endorsed by AENOR in November of 2008.) | |
| Connectors for electronic equipment - Tests and measurements -- Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength (Endorsed by AENOR in February of 2009.) | |
| Connectors for electronic equipment - Tests and measurements -- Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections) (Endorsed by AENOR in November of... | |
| Connectors for electronic equipment - Tests and measurements -- Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts) (Endorsed by AENOR in February... | |
| Connectors for electronic equipment - Tests and measurements -- Part 16-6: Mechanical tests on contacts and terminations - Test 16f: Robustness of terminations (Endorsed by AENOR in February of 2009.)... | |
| Connectors for electronic equipment - Tests and measurements -- Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping (Endorsed by AENOR in... | |
| Connectors for electronic equipment - Tests and measurements -- Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections) (Endorsed by AENOR in November... | |
| Connectors for electronic equipment - Tests and measurements -- Part 17-1: Cable clamping tests - Test 17a: Cable clamp robustness (Endorsed by AENOR in November of 2010.) | |
| Connectors for electronic equipment - Tests and measurements -- Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile) (Endorsed by AENOR in November of... | |
| Connectors for electronic equipment - Tests and measurements -- Part 17-4: Cable clamping tests - Test 17d: Cable clamp resistance to cable torsion (Endorsed by AENOR in November of 2010.)... | |
| Connectors for electronic equipment - Tests and measurements -- Part 19-1: Chemical resistance tests - Test 19a: Fluid resistance of pre-insulated crimp barrels (Endorsed by AENOR in September of 2010.)... | |
| Connectors for electronic equipment - Tests and measurements -- Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method. | |
| Connectors for electronic equipment - Tests and measurements -- Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method | |
| Connectors for electronic equipment - Tests and measurements -- Part 2-3: Electrical continuity and contact resistance tests - Test 2c: Contact resistance variation. | |
| Connectors for electronic equipment - Tests and measurements -- Part 2-5: Electrical continuity and contact resistance tests - Test 2e: Contact disturbance | |
| Connectors for electronic equipment - Tests and measurements -- Part 2-6: Electrical continuity and contact resistance tests - Test 2f: Housing (shell) electrical continuity. | |
| Connectors for electronic equipment - Tests and measurements -- Part 20-1: Fire hazard tests - Test 20a: Flammability, needle-flame (Endorsed by AENOR in October of 2010.) | |
| Connectors for electronic equipment - Tests and measurements -- Part 20-3: Fire hazard tests - Test 20c: Flammability, glow-wire (Endorsed by AENOR in October of 2010.) | |
| Connectors for electronic equipment - Tests and measurements -- Part 21-1: R.F. resistance tests - Test 21a: R.F. shunt resistance (Endorsed by AENOR in October of 2010.) | |
| Connectors for electronic equipment - Tests and measurements -- Part 22-1: Capacitance tests - Test 22a: Capacitance (Endorsed by AENOR in October of 2010.) | |
| Connectors for electronic equipment - Tests and measurements -- Part 23-2: Screening and filtering tests - Test 23b: Suppression characteristics of integral filters (Endorsed by AENOR in November of 2010.)... | |
| Connectors for electronic equipment - Tests and measurements -- Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors | |
| Connectors for electronic equipment - Tests and measurements -- Part 25-1: Test 25a - Crosstalk ratio. | |
| Connectors for electronic equipment - Tests and measurements -- Part 25-2: Test 25b: Attenuation (insertion loss). | |
| Connectors for electronic equipment - Tests and measurements -- Part 25-4: Test 25d - Propagation delay. | |
| Connectors for electronic equipment - Tests and measurements -- Part 25-5: Test 25e - Return loss | |
| Connectors for electronic equipment - Tests and measurements -- Part 25-6: Test 25f: Eye pattern and jitter | |
| Connectors for electronic equipment - Tests and measurements -- Part 25-7: Test 25g - Impedance, reflection coefficient and voltage standing wave ratio (VSWR) | |
| Connectors for electronic equipment - Tests and measurements -- Part 25-9: Signal integrity tests - Test 25i: Alien crosstalk (Endorsed by AENOR in March of 2009.) | |
| Connectors for electronic equipment - Tests and measurements -- Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g... | |
| Connectors for electronic equipment - Tests and measurements -- Part 3-1: Insulation tests - Test 3a: Insulation resistance. | |
| Connectors for electronic equipment - Tests and measurements -- Part 4-1: Voltage stress tests - Test 4a: Voltage proof | |
| Connectors for electronic equipment - Tests and measurements -- Part 4-2: Voltage stress tests - Test 4b: Partial discharge. | |
| Connectors for electronic equipment - Tests and measurements -- Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels. | |
| Connectors for electronic equipment - Tests and measurements -- Part 5-1: Current-carrying capacity tests - Test 5a: Temperature rise. | |
| Connectors for electronic equipment - Tests and measurements -- Part 5-2: Current-carrying capacity tests - Test 5b: Current-temperature derating. | |
| Connectors for electronic equipment - Tests and measurements -- Part 6-1: Dynamic stress tests - Test 6a: Acceleration, steady state. | |
| Connectors for electronic equipment - Tests and measurements -- Part 6-2: Dynamic stress tests - Test 6b: Bump. | |
| Connectors for electronic equipment - Tests and measurements -- Part 6-3: Dynamic stress tests - Test 6c: Shock. | |
| Connectors for electronic equipment - Tests and measurements -- Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal). | |
| Connectors for electronic equipment - Tests and measurements -- Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated) (Endorsed by AENOR in September of 2010.) | |
| Connectors for electronic equipment - Tests and measurements -- Part 8-1: Static load tests (fixed connectors) - Test 8a: Static load, transverse (Endorsed by AENOR in November of 2010.) | |
| Connectors for electronic equipment - Tests and measurements -- Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, axial (Endorsed by AENOR in September of 2011.) | |
| Connectors for electronic equipment - Tests and measurements -- Part 9-1: Endurance tests - Test 9a: Mechanical operation (Endorsed by AENOR in August of 2010.) | |
| Connectors for electronic equipment - Tests and measurements -- Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging/separating ) with electrical load. (IEC 60512-9-3:2006) | |
| Connectors for electronic equipment - Tests and measurements -- Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging/separating ) with electrical load | |
| Connectors for electronic equipment- Tests and measurements- Part 16-9: Mechanical tests on contacts and terminations- Test 16i:Grounding contact spring holding force (Endorsed by AENOR in November of 2008.) | |
| Degrees of protection provided by enclosures (IP Code) | |
| Determination of the permanent filtration of X-ray tube assemblies | |
| Dimensions of square cores (RM-cores) made of magnetic oxides and associated parts | |
| DIRECT-CURRENT POTENTIOMETERS. | |
| DIRECT-CURRENT POTENTIOMETERS | |
| DIRECT-CURRENT RESISTIVE VOLT RATIO BOXES. | |
| DIRECT-CURRENT RESISTIVE VOLT RATIO BOXES | |
| ELECTRIC CLOTHES WASHING MACHINES FOR HOUSEHOLD USE. METHODS FOR MEASURING THE PERFORMANCE. | |
| Electric dishwashers for household use - Methods for measuring the performance | |
| Electric toasters for household and similar purposes - Methods for measuring the performance | |
| ELECTRIC TOASTERS FOR HOUSEHOLD AND SIMILAR PURPOSES. METHODS FOR MEASURING THE PERFORMANCE. | |
| Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods (IEC 60426:2007). (Endorsed by AENOR in April of 2007.) | |
| Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 1: Test 11a - Climatic sequence | |
| Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories | |
| Electromechanical components for electronic equipment - Basic testing procedures and measuring methods -- Part 1: General -- Section 4: Test 1d: Contact protection effectiveness (scoop-proof). | |
| Electromechanical components for electronic equipment - Basic testing procedures and measuring methods -- Part 20-2: Test 20b - Flammability tests - Fireproofness. | |
| Electromechanical components for electronic equipment - Basic testing procedures and measuring methods -- Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories. | |
| Electromechanical components for electronic equipment - Basic testing procedures and measuring methods -- Part 6: Dynamic stress tests -- Section 5: Test 6e: Random vibration. | |
| ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT - BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 11: CLIMATIC TESTS. SECTION 14: TEST 11P. FLOWING SINGLE GAS CORROSION TEST. | |
| ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT - BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 14: SEALING TESTS. SECTION 7: TEST 14G: IMPACTING WATER | |
| ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 11: CLIMATIC TESTS. SECTION 7: TEST 11G: FLOWING MIXED GAS CORROSION TEST. | |
| ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 11: CLIMATIC TESTS. SECTION 8: TEST 11H. SAND AND DUST. | |
| ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 12: SOLDERING TESTS. SECTION 6: TEST 12F: SEALING AGAINST FLUX AND CLEANING SOLVENTS IN MACHINE SOLDERING. | |
| ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 13: MECHANICAL OPERATING TESTS. SECTION 1: TEST 13A: ENGAGING AND SEPARATING FORCES. | |
| ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 15: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS. SECTION 8: TEST 15H. CONTACT RETENTION SYSTEM RESISTANCE TO TOOL APPLICATION. | |
| ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 16: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS. SECTION 20: TEST 16T: MECHANICAL STRENGHT (WIRED TERMINATION OF SOLDERLESS CONNECTIONS). | |
| ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 19: CHEMICAL RESISTANCE TESTS. SECTION 3: TEST 19C. FLUID RESISTANCE | |
| ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 1: GENERAL EXAMINATION. SECTION 3: TEST 1C - ELECTRICAL ENGAGEMENT LENGTH | |
| Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 1: General. Section 4: Test 1d: Contact protection effectiveness (scoop-proof). | |
| ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 1: GENERAL. SECTION 4: TEST 1D: CONTACT PROTECTION PROTECTION EFFECTIVENESS (SCOOP-PROOF) | |
| ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 1: GENERAL. | |
| ELECTROMECHANICAL COMPONNETS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 10: IMPACT TESTS (FREE COMPONENTS), STATIC LOAD TESTS (FIXED COMPONENTS), ENDURANCE TESTS AND OVERLOAD TESTS. SECTION 4: TEST... | |
| Evaluation and qualification of electrical insulation systems (Endorsed by AENOR in November of 2011.) | |
| Evaluation and qualification of electrical insulation systems (Endorsed by Asociación Española de Normalización in May of 2017.) | |
| Evaluation and qualification of electrical insulation systems | |
| Ferrite cores - Guide on the limits of surface irregularities - Part 1: General specification | |
| Ferrite cores - Guide on the limits of surface irregularities - Part 3: ETD-cores and E-cores | |
| Ferrite cores - Guide on the limits of surface irregularities - Part 4: Ring cores | |
| Ferrite cores - Guide on the limits of surface irregularities - Part 5: Planar-cores (Endorsed by AENOR in September of 2009.) | |
| Ferrite cores - Guidelines on the limits of surface irregularities - Part 1: General Specification (Endorsed by AENOR in April of 2016.) | |
| Ferrite cores - Guidelines on the limits of surface irregularities - Part 2: RM-cores (Endorsed by AENOR in April of 2016.) | |
| Ferrite cores - Guidelines on the limits of surface irregularities - Part 3: ETD-cores, EER-cores, EC-cores and E-cores (Endorsed by AENOR in April of 2016.) | |
| Ferrite cores - Guidelines on the limits of surface irregularities - Part 4: Ring-cores (Endorsed by AENOR in April of 2016.) | |
| Ferrite cores - Guidelines on the limits of surface irregularities - Part 8: PQ-cores (Endorsed by AENOR in January of 2016.) | |
| Fixed capacitors for use in electronic equipment - Part 14-1: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Assessment level D... | |
| Fixed capacitors for use in electronic equipment - Part 14-1: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Assessment level DZ... | |
| Fixed capacitors for use in electronic equipment - Part 14-2: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Safety tests only... | |
| Fixed capacitors for use in electronic equipment - Part 14-3: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Assessment level DZ... | |
| Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains (Endorsed by AENOR in December... | |
| Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains (Endorsed by AENOR in June... | |
| Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains (Endorsed by AENOR in October... | |
| Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains | |
| Fixed capacitors for use in electronic equipment - Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte (Endorsed by Asociación Española de Normalización in October of 2017.)... | |
| Fixed capacitors for use in electronic equipment - Part 17: Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors | |
| Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyte (Endorsed by AENOR in October... | |
| Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyte | |
| Fixed capacitors for use in electronic equipment - Part 19: Sectional specification - Fixed metallized polyethylene-terepht halate film dielectric surface mount d.c. capacitors | |
| Fixed capacitors for use in electronic equipment - Part 19: Sectional specification: Fixed metallized polyethylene-terepht halate film dielectric surface mount d.c. capacitors (Endorsed by AENOR in January of 2016.) | |
| Fixed capacitors for use in electronic equipment - Part 20-1: Blank detail specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors - Assessment level EZ (Endorsed by... | |
| Fixed capacitors for use in electronic equipment - Part 20: Sectional specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors (Endorsed by AENOR in November of 2015.)... | |
| Fixed capacitors for use in electronic equipment - Part 20: Sectional specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors | |
| Fixed capacitors for use in electronic equipment - Part 21-1: Blank detail specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 - Assessment level EZ | |
| Fixed capacitors for use in electronic equipment - Part 21: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 (Endorsed by AENOR in June of 2012.)... | |
| Fixed capacitors for use in electronic equipment - Part 22-1: Blank detail specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 - Assessment level EZ | |
| Fixed capacitors for use in electronic equipment - Part 22: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 (Endorsed by AENOR in June of 2012.)... | |
| Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors (Endorsed by AENOR in August of 2015.)... | |
| Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors | |
| Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte (Endorsed by Asociación Española de Normalización... | |
| Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte (Endorsed by AENOR in November of... | |
| Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte | |
| Fixed capacitors for use in electronic equipment - Part 25: Sectional specification - Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte (Endorsed by AENOR in November of... | |
| Fixed capacitors for use in electronic equipment - Part 25: Sectional specification - Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte | |
| Fixed capacitors for use in electronic equipment - Part 26: Sectional specification - Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte | |
| Fixed capacitors for use in electronic equipment - Part 2: Sectional specification - Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors (Endorsed by AENOR in June of 2012.) | |
| Fixed capacitors for use in electronic equipment - Part 3: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with solid (MnO2) electrolyte (Endorsed by AENOR in November of 2016.)... | |
| Fixed capacitors for use in electronic equipment - Part 3: Sectional specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte | |
| Fixed capacitors for use in electronic equipment - Part 4-2: Blank detail specification - Fixed aluminium electrolytic capacitors with solid (MnO2) electrolyte - Assessment level EZ (IEC 60384-4-2:2007). (Endorsed by... | |
| Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyte | |
| Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Fixed aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyte (Endorsed by AENOR in December of 2016.)... | |
| Fixed capacitors for use in electronic equipment - Part 8-1: Blank detail specification: Fixed capacitors of ceramic dielectric, Class 1 - Assessment level EZ | |
| Fixed capacitors for use in electronic equipment - Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1 (Endorsed by AENOR in June of 2015.) | |
| Fixed capacitors for use in electronic equipment - Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1 (Endorsed by Asociación Española de Normalización in November of 2017.) | |
| Fixed capacitors for use in electronic equipment - Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1 | |
| Fixed capacitors for use in electronic equipment - Part 9-1: Blank detail specification: Fixed capacitors of ceramic dielectric, Class 2 - Assessment level EZ | |
| Fixed capacitors for use in electronic equipment - Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2 (Endorsed by AENOR in June of 2015.) | |
| Fixed capacitors for use in electronic equipment - Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2 | |
| Fixed capacitors for use in electronic equipment -- Part 16-1: Blank detail specification: Fixed metallized polypropylene film dielectric d.c. capacitors - Assessment levels E and EZ (Endorsed by AENOR in... | |
| Fixed capacitors for use in electronic equipment -- Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors (Endorsed by AENOR in February of 2006.) | |
| Fixed capacitors for use in electronic equipment -- Part 17-1: Blank detail specification - Fixed metallized polypropylene film dielectric a.c. and pulse capacitors - Assessment levels E and EZ (Endorsed... | |
| Fixed capacitors for use in electronic equipment -- Part 18-1: Blank detail specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) electrolyte - Assessment level EZ (IEC 60384-18-1:2007). | |
| Fixed capacitors for use in electronic equipment -- Part 18-2: Blank detail specification - Fixed aluminium electrolytic surface mount capacitors with non-solid electrolyte - Assessment level EZ (IEC 60384-18-2:2007). (Endorsed... | |
| Fixed capacitors for use in electronic equipment -- Part 19-1: Blank detail specification - Fixed metallized polyethylene-terepht halate film dielectric surface mount d.c. capacitors - Assessment level EZ (Endorsed by... | |
| Fixed capacitors for use in electronic equipment -- Part 2-1: Blank detail specification: Fixed metallized polyethylene-terepht halate film dielectric d.c. capacitors - Assessment levels E and EZ (Endorsed by AENOR... | |
| Fixed capacitors for use in electronic equipment -- Part 20: Blank detail specification: Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors - Assessment level EZ. (Endorsed by AENOR... | |
| Fixed capacitors for use in electronic equipment -- Part 20: Sectional specification: Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors. (Endorsed by AENOR in November of 2001.) | |
| Fixed capacitors for use in electronic equipment -- Part 21: Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 (Endorsed by AENOR in March of 2005.) | |
| Fixed capacitors for use in electronic equipment -- Part 22: Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 (Endorsed by AENOR in March of 2005.) | |
| Fixed capacitors for use in electronic equipment -- Part 23-1: Blank detail specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors - Assessment level EZ (Endorsed by... | |
| Fixed capacitors for use in electronic equipment -- Part 24-1: Blank detail specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte - Assessment level EZ (IEC... | |
| Fixed capacitors for use in electronic equipment -- Part 25-1: Blank detail specification - Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte - Assessment level EZ (IEC... | |
| Fixed capacitors for use in electronic equipment -- Part 26-1: Blank detail specification - Aluminum electrolytic capacitors with conductive polymer solid electrolyte - Assessment level EZ (Endorsed by AENOR in... | |
| Fixed capacitors for use in electronic equipment -- Part 2: Sectional specification: Fixed metallized polyethylene-terepht halate film dielectric d.c. capacitors (Endorsed by AENOR in February of 2006.) | |
| Fixed capacitors for use in electronic equipment -- Part 3-1: Blank detail specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte - Assessment level EZ (IEC 60384-3-1:2006). | |
| Fixed capacitors for use in electronic equipment -- Part 4-1: Blank detail specification - Fixed aluminium electrolytic capacitors with non-solid electrolyte - Assessment level EZ (IEC 60384-4-1:2007). (Endorsed by AENOR... | |
| Fixed capacitors for use in electronic equipment -- Part 6-1: Blank detail specification - Fixed metallized polycarbonate film dielectric d.c. capacitors - Assessment level E (Endorsed by AENOR in January... | |
| Fixed capacitors for use in electronic equipment -- Part 6: Sectional specification - Fixed metallized polycarbonate film dielectric d.c. capacitors (Endorsed by AENOR in January of 2006.) | |
| GAS-INSULATED METAL-ENCLOSED SWITCHGEAR FOR RATED VOLTAGES OF 72,5 KV AND ABOVE. | |
| Gas-insulated metal-enclosed switchgear for rated voltages of 72,5 kV and above | |
| GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT. PART 1: OVERVIEW AND APPLICATION. | |
| GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT. PART 2: SYMBOL ORIGINALS. | |
| Guidance of the limits of surface irregularities of ferrite cores - Part 2: RM-cores | |
| Guidelines for the checking and treatment of sulphur hexafluoride (SF6) taken from electrical equipment and specification for its re-use | |
| High-voltage alternating current contactors and contactor-based motor starters. | |
| HIGH-VOLTAGE ALTERNATING CURRENT SWITCH-FUSE COMBINATIONS. | |
| High-voltage cable plug and socket connections for medical X-ray equipment | |
| Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes | |
| Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes | |
| Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) | |
| Incandescent lamps - Safety specifications -- Part 1: Tungsten filament lamps for domestic and similar general lighting purposes (IEC 60432-1:1999/A1:2005 modified) | |
| Incandescent lamps - Safety specifications -- Part 1: Tungsten filament lamps for domestic and similar general lighting purposes. | |
| Incandescent lamps - Safety specifications -- Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes (IEC 60432-2:1999/A1:2005 modified). | |
| Incandescent lamps - Safety specifications -- Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes. | |
| Incandescent lamps - Safety specifications -- Part 3: Tungsten-halogen lamps (non-vehicle) (IEC 60432-3:2002/A1:2005 ). | |
| Incandescent lamps - Safety specifications -- Part 3: Tungsten-halogen lamps (non-vehicle) | |
| Industrial electroheating installations - General test methods | |
| Installations for electroheating and electromagnetic processing - General performance test methods (Endorsed by AENOR in July of 2015.) | |
| Insulators for overhead lines with a nominal voltage above 1 kV - Ceramic insulators for a.c. systems - Characteristics of insulator units of the long rod type | |
| LABORATORY D.C. RESISTORS | |
| LABORATORY RESISTORS. PART 2: LABORATORY A.C. RESISTORS | |
| Lampholders for tubular fluorescent lamps and starterholders (Endorsed by Asociación Española de Normalización in June of 2021.) | |
| Lampholders for tubular fluorescent lamps and starterholders (Endorsed by Asociación Española de Normalización in November of 2017.) | |
| Lampholders for tubular fluorescent lamps and starterholders (Endorsed by Asociación Española de Normalización in November of 2024.) | |
| LAMPHOLDERS FOR TUBULAR FLUORESCENT LAMPS AND STARTERHOLDERS. | |
| Lampholders for tubular fluorescent lamps and starterholders | |
| Low-voltage switchgear and controlgear assemblies -- Part 1: Type-tested and partially type-tested assemblies. | |
| Low-voltage switchgear and controlgear assemblies -- Part 1: Type-tested and partially type-tested assemblies | |
| Low-voltage switchgear and controlgear assemblies -- Part 2: Particular requirements for busbar trunking systems (busways). | |
| Low-voltage switchgear and controlgear assemblies -- Part 2: Particular requirements for busbar trunking systems (busways) | |
| Low-voltage switchgear and controlgear assemblies -- Part 3: Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use... | |
| Low-voltage switchgear and controlgear assemblies -- Part 4: Particular requirements for assemblies for construction sites (ACS) | |
| Low-voltage switchgear and controlgear assemblies -- Part 5: Particular requirements for assemblies for power distribution in public networks (IEC 60439-5:2006). | |
| Low-voltage switchgear and controlgear assemblies -- Part 5: Particular requirements for assemblies intended to be installed outdoors in public places - Cable distribution cabinets (CDCs) for power distribution in networks. | |
| LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES. PART 1: REQUIREMENTS FOR TYPE-TESTED AND PARTIALLY TYPE-TESTED ASSEMBLIES. | |
| LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES. PART 1: TYPE-TESTED AND PARTIALLY TYPE-TESTED ASSEMBLIES. | |
| LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES. PART 2: PARTICULAR REQUIREMENTS FOR BUSBAR TRUNKING SYSTEMS (BUSWAYS). | |
| LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES. PART 3: PARTICULAR REQUIREMENTS FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES INTENDED TO BE INSTALLED IN PLACES WHERE UNSKILLED PERSONS HAVE ACCESS FOR THEIR USE. DISTRIBUTION... | |
| LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES. PART 4: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR CONSTRUCTION SITES (ACS). | |
| Low-voltage switchgear and controlgear assemblies. Part 5: Particular requirements for assemblies intended to be installed outdoors in public places Cable distribution cabinets (CDCs) for power distribution in networks | |
| LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES. PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES INTENDED TO BE INSTALLED OUTDOORS IN PUBLIC PLACES. CABLE DISTRIBUTION CABINETS (CDCS) FOR POWER DISTRIBUTION IN NETWORKS. | |
| Magnetic materials - Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and strip (Endorsed by AENOR in March of 2013.) | |
| Magnetic materials - Part 13: Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip | |
| Magnetic materials - Part 15: Methods for the determination of the relative magnetic permeability of feebly magnetic materials (Endorsed by AENOR in January of 2013.) | |
| Magnetic materials - Part 15: Methods for the determination of the relative magnetic permeability of feebly magnetic materials (Endorsed by Asociación Española de Normalización in April of 2017.) | |
| Magnetic materials - Part 1: Classification (Endorsed by Asociación Española de Normalización in March of 2017.) | |
| Magnetic materials - Part 1: Classification (Endorsed by Asociación Española de Normalización in October of 2025.) | |
| Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of an Epstein frame | |
| Magnetic materials - Part 5: Permanent magnet (magnetically hard) materials - Methods of measurement of magnetic properties (Endorsed by AENOR in July of 2015.) | |
| Magnetic materials - Part 5: Permanent magnet (magnetically hard) materials - Methods of measurement of magnetic properties | |
| Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by... | |
| Magnetic materials - Part 8-1: Specifications for individual materials - Magnetically hard materials (Endorsed by AENOR in July of 2015.) | |
| Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials (Endorsed by Asociación Española de Normalización in June of 2017.) | |
| Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials | |
| Magnetic materials -- Part 14: Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method | |
| Magnetic materials -- Part 2: Methods of measurement of the magnetic properties of electrical steel sheet and strip by means of an Epstein frame | |
| Magnetic materials -- Part 4: Methods of measurement of d.c. magnetic properties of magnetically soft materials. | |
| Magnetic materials -- Part 4: Methods of measurement of d.c. magnetic properties of magnetically soft materials | |
| Magnetic materials -- Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by... | |
| MAGNETIC MATERIALS. PART 2: METHODS OF MEASUREMENT OF THE MAGNETIC PROPERTIES OF ELECTRICAL STEEL SHEET AND STRIP BY MEANS OF AN EPSTEIN FRAME | |
| MAGNETIC MATERIALS. PART 4: METHODS OF MEASUREMENT OF D.C. MAGNETIC PROPERTIES OF IRON AND STEEL. | |
| MAN-MACHINE INTERFACE (MMI). ACTUATING PRINCIPLES. (Endorsed by AENOR in November of 1995.) | |
| Measurement of quartz crystal unit parameters - Part 6: Measurement of drive level dependence (DLD) (Endorsed by AENOR in November of 2013.) | |
| Measurement of quartz crystal unit parameters - Part 6: Measurement of drive level dependence (DLD) | |
| Measurement of quartz crystal unit parameters - Part 8 : Test fixture for surface mounted quartz crystal units (Endorsed by Asociación Española de Normalización in May of 2017.) | |
| Measurement of quartz crystal unit parameters - Part 8: Test fixture for surface mounted quartz crystal units | |
| Measurement of quartz crystal unit parameters -- Part 11: Standard method for the determination of the load resonance frequency fL and the effective load capacitance CLeff using automatic network analyzer... | |
| Measurement of quartz crystal unit parameters -- Part 9: Measurement of spurious resonances of piezoelectric crystal units (IEC 60444-9:2007). (Endorsed by AENOR in August of 2007.) | |
| MEASUREMENT OF QUARTZ CRYSTAL UNIT PARAMETERS BY ZERO PHASE IN A PI-NETWORK. PART 2: PHASE OFFSET METHOD FOR MEASUREMENT OF MOTIONAL CAPACITANCE OF QUARTZ CRYSTAL UNITS (Endorsed by AENOR in... | |
| Measurement of quartz crystal unit parameters by zero phase technique in a pi-network - Part 3: Basic method for the measurement of two-terminal parameters of quartz crystal units up to... | |
| Measurement of quartz crystal unit parameters by zero phase technique in a pi-network -- Part 1: Basic method for the measurement of resonance frequency and resonance resistance of quartz crystal... | |
| MEASUREMENT OF QUARTZ CRYSTAL UNIT PARAMETERS BY ZERO PHASE TECHNIQUE IN A PI-NETWORK. PART 1: BASIC METHOD FOR THE MEASUREMENT OF RESONANCE FREQUENCY AND RESONANCE RESISTANCE OF QUARTZ CRYSTAL UNITS... | |
| MEASUREMENT OF QUARTZ CRYSTAL UNIT PARAMETERS BY ZERO PHASE TECHNIQUE IN A PI-NETWORK. PART 4 METHOD FOR THE MEASUREMENT OF THE LOAD RESONANCE FREQUENCY FL, LOAD RESONANCE RESISTANCE RL AND... | |
| Measurement of queartz crystal unit parameters -- Part 7: Measurement of activity and frequency dips of quartz crystal units (Endorsed by AENOR in September of 2004.) | |
| Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials (IEC 60450:2004/A1:2007). | |
| Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials | |
| MEASUREMENT QUARTZ CRYSTAL UNIT PARAMETERS. PART 5: METHODS FOR THE DETERMINATION OF EQUIVALENT ELECTRICAL PARAMETERS USING AUTOMATIC NETWORK ANALYZER TECHNIQUES AND ERROR CORRECTION (Endorsed by AENOR in October of 1997.)... | |
| Method of measurement of non-linearity in resistors (Endorsed by AENOR in October of 2012.) | |
| Method of sampling insulating liquids | |
| Methods of measurement for radio equipment used in satellite earth stations - Part 2: Measurements for sub-systems - Section 5: Frequency modulators | |
| Methods of measurement for radio equipment used in satellite earth stations - Part 2: Measurements for sub-systems - Section 6: Frequency demodulators | |
| Methods of measurement for radio equipment used in satellite earth stations - Part 3: Methods of measurement on combinations of sub-systems - Section 4: Measurements for frequency division multiplex (f.d.m.)... | |
| Mineral insulating oils in electrical equipment - Supervision and maintenance guidance (IEC 60422:2005) | |
| Mineral insulating oils in electrical equipment - Supervision and maintenance guidance | |
| Nuclear instrumentation - Constructional requirements and classification of radiometric gauges (IEC 60405:2003, modified) (Endorsed by AENOR in December of 2007.) | |
| PAINTS AND VARNISHES. STANDARD PANELS FOR TESTING. | |
| Potentiometers for use in electronic equipment - Part 1: Generic specification | |
| Potentiometers for use in electronic equipment - Part 2: Sectional specification - Lead-screw actuated and rotary preset potentiometers (Endorsed by AENOR in May of 2016.) | |
| Potentiometers for use in electronic equipment - Part 5: Sectional specification - Single-turn rotary low-power wirewound and nonwirewound potentiometers (Endorsed by AENOR in May of 2016.) | |
| Potentiometers for use in electronic equipment - Part 6: Sectional specification - Surface mount preset potentiometers (Endorsed by AENOR in May of 2016.) | |
| PRESSURE SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 2: POLYESTER FILM TAPES WITH RUBBER THERMOSETTING OR ACRYLIC CROSSLINKED ADHESIVES. | |
| Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 6: Polycarbonate film tapes with acrylic thermoplastic adhesive | |
| Pressure-sensitive adhesive tapes for electrical purposes -- Part 2: Methods of test (IEC 60454-2:2007). (Endorsed by AENOR in February of 2008.) | |
| Pressure-sensitive adhesive tapes for electrical purposes -- Part 3-1: Specifications for individual materials - PVC film tapes with pressure-sensitive adhesive. | |
| Pressure-sensitive adhesive tapes for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 11: Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive... | |
| Pressure-sensitive adhesive tapes for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 12: Requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesive (IEC 60454-3-12:2006) | |
| Pressure-sensitive adhesive tapes for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 14: Polytetrafluoroethyl ene film tapes with pressure-sensitive adhesive. | |
| Pressure-sensitive adhesive tapes for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 15: Polyester film/polyester non-woven combinations with rubber thermosetting adhesive. | |
| Pressure-sensitive adhesive tapes for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 16: Polyester film/glass filament combinations with pressure-sensitive adhesive | |
| Pressure-sensitive adhesive tapes for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 17: Polyester/epoxy combinations with pressure-sensitive adhesive. | |
| Pressure-sensitive adhesive tapes for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 18: Polypropylene film tapes with pressure-sensitive adhesive | |
| Pressure-sensitive adhesive tapes for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 19: Tapes made from various backing materials with pressure-sensitive adhesive on both sides | |
| Pressure-sensitive adhesive tapes for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 2: Requirements for polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives... | |
| Pressure-sensitive adhesive tapes for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 4: Cellulose paper, creped and non-creped, with rubber thermosetting adhesive (IEC 60454-3-4:2007). | |
| Pressure-sensitive adhesive tapes for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 8: Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined... | |
| PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATION FOR INDIVIDUAL MATERIALS. SHEET 13: REQUIREMENTS FOR COMBINED CELLULOSE-VISCOSE WOVEN FABRIC TAPES, ONE SIDE COVERED WITH A THERMOPLASTIC MATERIAL, THE OTHER... | |
| PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 10: REQUIREMENTS FOR CELLULOSE-ACETATE-BU TYRATE FILM TAPES WITH RUBBER THERMOSETTING ADHESIVE. | |
| PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 11: COMBINED TAPES MADE OF CREPED CELLULOSIC PAPER AND POLYETHYLENE TEREPHTHALATE FILM WITH RUBBER THERMOSETTING ADHESIVE. | |
| PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 12: POLYETHYLENE FILM TAPES WITH PRESSURE-SENSITIVE ADHESIVE. | |
| PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 1: PVC FILM TAPES WITH PRESSURE-SENSITIVE ADHESIVE. | |
| PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 3: POLYESTER FILM TAPES WITH RUBBER THERMOPLASTIC ADHESIVE. | |
| PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 4: CELLULOSIC PAPER, CREPED, WITH RUBBER THERMOSETTING ADHESIVE. | |
| PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 5: CELLULOSIC PAPER, NON-CREPED, WITH RUBBER THERMOSETTING ADHESIVE. | |
| PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 7: POLYIMIDE FILM TAPES WITH PRESSURE-SENSITIVE ADHESIVE. | |
| PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 8: GLASS FABRIC WITH PRESSURE SENSITIVE ADHESIVE. | |
| PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 9: CELLULOSE ACETATE WOVEN FABRIC TAPES WITH RUBBER THERMOSETTING ADHESIVE. | |
| RADIO INTERFERENCE TEST ON HIGH-VOLTAGE INSULATORS. | |
| Resin based compounds used for electrical insulation -- Part 3: Specifications for individual materials - Sheet 4: Filled polyurethane compounds | |
| RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS | |
| Resin based reactive compounds used for electrical insulation - Part 2: Methods of test (Endorsed by AENOR in January of 2016.) | |
| Resin based reactive compounds used for electrical insulation - Part 2: Methods of test | |
| Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories (Endorsed by AENOR in August of 2013.) | |
| Resin based reactive compounds used for electrical insulation -- Part 3: Specifications for individual materials - Sheet 1: Unfilled epoxy resinous compounds | |
| Resin based reactive compounds used for electrical insulation -- Part 3: Specifications for individual materials - Sheet 2: Quartz filled epoxy resinous compounds | |
| Resin based reactive compounds used for electrical insulation -- Part 3: Specifications for individual materials - Sheet 3: Unfilled polyurethane compounds | |
| Resin based reactive compounds used for electrical insulation -- Part 3: Specifications for individual materials -- Sheet 5: Unsaturated polyester based impregnating resins (Endorsed by AENOR in July of 2006.)... | |
| Resin based reactive compounds used for electrical insulation -- Part 3: Specifications for individual materials -- Sheet 5: Unsaturated polyester based impregnating resins. | |
| Safety in electroheat installations - Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications | |
| Safety in electroheat installations - Part 21: Particular requirements for resistance heating equipment - Heating and melting glass equipment | |
| Safety in electroheat installations - Part 2: Particular requirements for resistance heating equipment | |
| Safety in electroheat installations - Part 4: Particular requirements for arc furnace installations | |
| Safety in electroheat installations - Part 6: Specifications for safety in industrial microwave heating equipment (Endorsed by AENOR in September of 2011.) | |
| Safety in electroheat installations - Part 8: Particular requirements for electroslag remelting furnaces | |
| Safety in electroheat installations - Part 9: Particular requirements for high-frequency dielectric heating installations | |
| Safety in electroheat installations -- Part 11: Particular requirements for installations using the effect of electromagnetic forces on liquid metals | |
| Safety in electroheat installations -- Part 1: General requirements | |
| Safety in electroheat installations -- Part 21: Particular requirements for resistance heating equipment - Heating and melting glass equipment | |
| Safety in electroheat installations -- Part 3: Particular requirements for induction and conduction heating and induction melting installations | |
| Safety in electroheat installations -- Part 6: Specifications for safety in industrial microwave heating equipment | |
| Safety in electroheat installations -- Part 7: Particular requirements for installations with electron guns | |
| SAFETY IN ELECTROHEAT INSTALLATIONS. PART 11: PARTICULAR REQUIREMENTS FOR INSTALLATIONS FOR ELECTROMAGNETIC STIRRING, TRANSPORT OR POURING OF METAL LIQUIDS. | |
| SAFETY IN ELECTROHEAT INSTALLATIONS. PART 1: GENERAL REQUIREMENTS. | |
| SAFETY IN ELECTROHEAT INSTALLATIONS. PART 21: PARTICULAR REQUIREMENTS FOR RESISTANCE HEATING EQUIPMENT. HEATING AND MELTING GLASS EQUIPMENT | |
| SAFETY IN ELECTROHEAT INSTALLATIONS. PART 2: PARTICULAR REQUIREMENTS FOR RESISTANCE HEATING EQUIPMENT. | |
| SAFETY IN ELECTROHEAT INSTALLATIONS. PART 3: PARTICULAR REQUIREMENTS FOR INDUCTION AND CONDUCTION HEATING AND INDUCTION MELTING INSTALLATIONS. | |
| SAFETY IN ELECTROHEAT INSTALLATIONS. PART 4: PARTICULAR REQUIREMENTS FOR ARC FURNACE INSTALLATIONS. | |
| SAFETY IN ELECTROHEAT INSTALLATIONS. PART 9: PARTICULAR REQUIREMENTS FOR HIGH-FREQUENCY DIELECTRIC HEATING INSTALLATIONS. | |
| Safety in electroheating installations - Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications (Endorsed by AENOR in June of 2013.) | |
| Safety in electroheating installations - Part 12: Particular requirements for infrared electroheating installations (Endorsed by AENOR in August of 2013.) | |
| Safety in electroheating installations - Part 1: General requirements | |
| Safety in electroheating installations - Part 4: Particular requirements for arc furnace installations (Endorsed by AENOR in October of 2013.) | |
| Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements (Endorsed by AENOR in July of 2015.) | |
| SAFETY REQUIREMENTS FOR ELECTRONIC FLASH APPARATUS FOR PHOTOGRAPHIC PURPOSES. | |
| SAFETY REQUIREMENTS FOR TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES. | |
| SAFETY SPECIFICATIONS FOR INCADESCENT LAMPS. PART 2: TUNGSTEN HALOGEN LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES. | |
| SAFETY SPECIFICATIONS FOR INCANDESCENT LAMPS. PART 1: TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES. | |
| SAFETY SPECIFICATIONS FOR INCANDESCENT LAMPS. PART 2: TUNGSTEN HALOGEN lamps for domestic and similar general lighting purposes. | |
| Single sideband power-line carrier terminals | |
| SPECIFICATION FOR PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES. PART 2: METHODS OF TEST. | |
| SPECIFICATION FOR UNUSED INSULATING MINERAL OILS FOR CABLES WITH OIL DUCTS. | |
| SPECIFICATIONS FOR PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES. PART 1: GENERAL REQUIREMENTS. | |
| SPOOL FOR BROADCAST VIDEOTAPE RECORDERS (VTRS) (Endorsed by AENOR in July of 1998.) | |
| STANDARD SHEETS FOR BARREL THREAD FOR E14 AND E27 LAMPHOLDERS WITH SHADE HOLDER RING. | |
| STANDARD SHEETS FOR BARREL THREAD FOR E14 AND E27 LAMPHOLDERS WITH SHADE HOLDER RING | |
| SYMBOLS FOR ALTERNATING-CURRENT ELECTRICITY METERS. | |
| SYNTHETIC TESTING OF HIGH VOLTAGE ALTERNATING CURRENT CIRCUIT-BREAKERS. | |
| SYNTHETIC TESTING OF HIGH-VOLTAGE ALTERNATING CURRENT CIRCUIT-BREAKERS. | |
| Terms and nomenclature for cores made of magnetically soft ferrites - Part 1: Terms used for physical irregularities | |
| Terms and nomenclature for cores made of magnetically soft ferrites - Part 2: Reference of dimensions | |
| Terms and nomenclature for cores made of magnetically soft ferrites - Part 3: Guidelines on the format of data appearing in manufacturers catalogues of transformer and inductor cores (Endorsed by... | |
| Terms and nomenclature for cores made of magnetically soft ferrites - Part 3: Guidelines on the format of data appearing in manufacturers' catalogues of transformer and inductor cores | |
| Terms and nomenclature for cores made of magnetically soft ferrites -- Part 2: Reference of dimensions | |
| Time and control code (Endorsed by AENOR in July of 2011.) | |
| Time and control code for video tape recorders. (Endorsed by AENOR in October of 2001.) | |
| Transitions, pulses and related waveforms - Terms, definitions and algorithms (Endorsed by AENOR in November of 2013.) | |
| Underwater acoustics - Hydrophones - Properties of hydrophones in the frequency range 1 Hz to 500 kHz (Endorsed by Asociación Española de Normalización in September of 2017.) | |
| UNE-EN 60439-1:1996 | |
| Varnishes used for electrical insulation -- Part 1: Definitions and general requirements (IEC 60464-1:1998/A1:2006 ) | |
| Varnishes used for electrical insulation -- Part 2: Methods of test (IEC 60464-2:2001/A1:2006 ). | |
| Varnishes used for electrical insulation -- Part 2: Methods of test. | |
| Varnishes used for electrical insulation -- Part 3: Specifications for individual materials -- Sheet 1: Ambient curing finishing varnishes (IEC 60464-3-1:2001/A1:20 06) | |
| Varnishes used for electrical insulation -- Part 3: Specifications for individual materials -- Sheet 1: Ambient curing finishing varnishes. | |
| Varnishes used for electrical insulation -- Part 3: Specifications for individual materials -- Sheet 2: Hot curing impregnating varnishes (IEC 60464-3-2:2001/A1:20 06). | |
| Varnishes used for electrical insulation -- Part 3: Specifications for individual materials -- Sheet 2: Hot curing impregnating varnishes. | |
| VARNISHES USED FOR ELECTRICAL INSULATION. PART 1: DEFINITIONS AND GENERAL REQUIREMENTS. | |
| Varnishes used for electrical insulation. Part 2: Methods of test |
| << Prev | Next >> |