AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
70
80
90
100
110
120
128
129
130
131
132
133
134
135
136
137
138
139
140
150
160
170
180
181
| Product Name | Notes |
|---|---|
| Aerospace series - Circuit breaker, connecting and attachment hardware (Endorsed by AENOR in September of 2015.) | |
| Aerospace series - Ethylene-propylene elastomer (EPM/EPDM) - Hardness 80 IRHD for static seal elements in hydraulic systems for long-term application - Material standard (Endorsed by Asociación Española de Normalización in... | |
| Aerospace series - Pure aluminium IVD coating for fasteners (Endorsed by Asociación Española de Normalización in September of 2025.) | |
| Aerospace series - Static seal elements elastomer, moulded, phosphate ester resistant - Technical specification (Endorsed by Asociación Española de Normalización in September of 2018.) | |
| ALKALINE SECONDARY CELLS AND BATTERIES. SEALED NICKEL-CADMIUM RECHARGEABLE MONOBLOC BATTERIES IN BUTTON CELL DESIGN. | |
| ALTERNATING CURRENT EARTHING SWITCHES. INDUCED CURRENT SWITCHING. | |
| Analysis techniques for dependability - Reliability block diagram and boolean methods (IEC 61078:2006) | |
| ANALYSIS TECHNIQUES FOR DEPENDABILITY. RELIABILITY BLOCK DIAGRAM METHOD. | |
| Application of Markov techniques (IEC 61165:2006). (Endorsed by AENOR in May of 2007.) | |
| Cables for portable earthing and short-circuiting equipment. | |
| Capacitors for power electronics (IEC 61071:2007). | |
| Classification of insulating liquids according to fire point and net calorific value | |
| Coatings for loaded printed wire boards (conformal coatings) -- Part 1: Definitions, classification and general requirements | |
| Coatings for loaded printed wire boards (conformal coatings) -- Part 2: Methods of test | |
| Coatings for loaded printed wire boards (conformal coatings) -- Part 3-1: Specifications for individual materials - Coatings for general purpose (Class 1), high reliability (Class 2) and aerospace (Class 3)... | |
| COATINGS FOR LOADED PRINTED WIRE BOARDS (CONFORMAL COATINGS). PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 1: COATINGS FOR GENERAL PURPOSE (CLASS I) AND FOR HIGH RELIABILITY (CLASS II). | |
| COMPACT DISC VIDEO SYSTEM. 12 CM CD-V. (Endorsed by AENOR in December of 1995.) | |
| Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000... | |
| Connectors for electrical and electronic equipment - Product requirements - Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments... | |
| Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features,... | |
| Connectors for electronic equipment - Part 4-114: Printed board connectors - Detail specification for two-part connector with integrated shielding function having a grid of 1 mm x 1,5 mm | |
| Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes... | |
| Connectors for electronic equipment - Product requirements - Part 1: Generic specification (Endorsed by Asociación Española de Normalización in April of 2019.) | |
| Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification (Endorsed by AENOR in November of 2011.) | |
| Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking (Endorsed by AENOR in October of 2012.) | |
| Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking (Endorsed by AENOR in December of 2014.)... | |
| Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking | |
| Connectors for electronic equipment - Product requirements - Part 2-106: Circular connectors - Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67... | |
| Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for connectors with M 12 × 1 screw-locking, for data transmission frequencies up to 500... | |
| Connectors for electronic equipment - Product requirements - Part 2-113: Circular connectors - Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with... | |
| Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular connectors (Endorsed by AENOR in November of 2011.) | |
| Connectors for electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 1 000 MHz | |
| Connectors for electronic equipment - Product requirements - Part 3-110: detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 mhz (Endorsed by Asociación... | |
| Connectors for electronic equipment - Product requirements - Part 3-110: Detail specification for shielded, free and fixed connectors for data transmission with frequencies up to 1 000 MHz (Endorsed by... | |
| Connectors for electronic equipment - product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 v d.c. And... | |
| Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function (Endorsed by AENOR in August... | |
| Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function (Endorsed by AENOR in May... | |
| Connectors for electronic equipment - Product requirements -- Part 1: Generic specification (Endorsed by AENOR in May of 2008.) | |
| Connectors for electronic equipment - Product requirements -- Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking (Endorsed by AENOR in January of 2009.) | |
| Connectors for electronic equipment - Product requirements -- Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking (Endorsed by AENOR in January of 2009.) | |
| Connectors for electronic equipment - Product requirements -- Part 2-107: Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking (Endorsed by AENOR in September... | |
| Connectors for electronic equipment - Product requirements -- Part 3-001: Rectangular connectors - Blank detail specification (Endorsed by AENOR in February of 2009.) | |
| Connectors for electronic equipment - Product requirements -- Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating... | |
| Connectors for electronic equipment - Product requirements -- Part 3-114: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to... | |
| Connectors for electronic equipment - Product requirements -- Part 3-115: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to... | |
| Connectors for electronic equipment - Product requirements -- Part 3-116: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to... | |
| Connectors for electronic equipment - Product requirements -- Part 3-117: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating... | |
| Connectors for electronic equipment - Product requirements -- Part 3-118: Rectangular connectors - Detail specification for a 4 pole + PE power connector with push-pull coupling (Endorsed by AENOR in... | |
| Connectors for electronic equipment - Product requirements -- Part 3: Rectangular connectors - Sectional specification (Endorsed by AENOR in February of 2009.) | |
| Connectors for electronic equipment - Product requirements -- Part 7-100: Cable outlet accessories - Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or... | |
| Connectors for electronic equipment -- Part 2-001: Circular connectors - Blank detail specification (Endorsed by AENOR in May of 2002.) | |
| Connectors for electronic equipment -- Part 2-101: Circular connectors - Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw-locking for low voltage applications (Endorsed by AENOR... | |
| Connectors for electronic equipment -- Part 2-102: Circular connectors with assessed quality - Detail specification for plugs and jacks for external low voltage power supply | |
| Connectors for electronic equipment -- Part 2-103: Circular connectors - Detail specification for a range of multipole connectors (type 'XLR') (Endorsed by AENOR in August of 2004.) | |
| Connectors for electronic equipment -- Part 3-103: Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial... | |
| Connectors for electronic equipment -- Part 3-104: Rectangular connectors - Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 600 MHz minimum (Endorsed... | |
| Connectors for electronic equipment -- Part 3-112: Rectangular connectors - Detail specification for rectangular connectors with four contacts for high performance serial bus for consumer audio/video equipment (IEC 61076-3-112:2006) (Endorsed... | |
| Connectors for electronic equipment -- Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and... | |
| Connectors for electronic equipment -- Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards... | |
| Connectors for electronic equipment -- Part 4-107: Printed board connectors with assessed quality - Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with... | |
| Connectors for electronic equipment -- Part 4-108: Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function,... | |
| Connectors for electronic equipment -- Part 4-110: Printed board connectors with assessed quality - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full... | |
| Connectors for electronic equipment -- Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment (Endorsed by AENOR in December of 2003.) | |
| Connectors for electronic equipment -- Part 6: Loose part contacts - Sectional specification (Endorsed by AENOR in June of 2004.) | |
| Connectors for electronic equipment -- Part 7-001: Cable outlet accessories - Blank detail specification (Endorsed by AENOR in November of 2004.) | |
| Connectors for electronic equipment- Product requirements- Part 3-110: Detail specification for shielded, free and fixed connectors for data transmission with frequencies up to 1000 MHz (Endorsed by AENOR in July... | |
| Connectors for use in d.c. low-frequency analogue and digital high speed data applications -- Part 4-103: Printed board connectors with assessed quality - Detail specification for two-part connectors with shielding... | |
| Connectors for use in d.c. low-frequency analogue and digital high speed data applications -- Part 4-104: Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic... | |
| Connectors for use in d.c. low-frequency analogue and digital highg-speed data applications. Part 2: Circular connectors with assessed quality. Sectional specification. | |
| Connectors for use in d.c., low-frequency analogue and digital high speed data applications -- Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors... | |
| Connectors for use in d.c., low-frequency analogue and digital high speed data applications -- Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specification. | |
| Connectors for use in d.c., low-frequency analogue and digital high-speed data applications -- Part 3-001: Rectangular connectors with assessed quality - Blank detail specification (Endorsed by AENOR in December of... | |
| Connectors for use in d.c., low-frequency analogue and digital high-speed data applications -- Part 3: Rectangular connectors with assessed quality - Sectional specification. | |
| Connectors for use in d.c., low-frequency analogue and digital high-speed data applications -- Part 5: In-line sockets with assessed quality - Sectional Specification (Endorsed by AENOR in March of 2002.)... | |
| CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C. LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS. PART 3: RECTANGULAR CONNECTORS. SECTION 101: DETAIL SPECIFICATION FOR A RANGE OF SHIELDED CONNECTORS... | |
| CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS. PART 1: GENERIC SPECIFICATION. | |
| Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications -- Part 4: Printed board connectors -- Section 105 : Detail specification for... | |
| CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS. PART 1: GENERIC SPECIFICATION. CAPABILITY APPROVAL. | |
| Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications. Part 4: Printed board connectors. Section 100: Detail specification for two-part connector modules... | |
| CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS. PART 4: SECTIONAL SPECIFICATIONS. PRINTED BOARD CONNECTORS. | |
| Connectors with assessed quality, for use in d.c., low frequency analogue and in ditital high-speed data applications -- Part 1: Generic specification - Capacity approval. | |
| Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications -- Part 4: Printed board connectors -- Section 102: Detail specification for two-part... | |
| Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications -- Part 4: Printed board connectors -- Section 101: Detail specification for two-part connector... | |
| CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS. PART 4: PRINTED BOARD CONNECTORS. SECTION 001: BLANK DETAIL SPECIFICATION. | |
| DATA EXCHANGE FOR METER READING, TARIFF AND LOAD CONTROL. DIRECT LOCAL DATA EXCHANGE. | |
| DATA EXCHANGE FOR METER READING, TARIFF AND LOAD CONTROL. LOCAL BUS DATA EXCHANGE. | |
| DECCA NAVIGATOR SYSTEM: RECEIVERS FOR SHIPS. MINIMUM PERFORMANCE STANDARDS. METHODS OF TESTING AND REQUIRED TEST RESULTS. (Endorsed by AENOR in May of 1995.) | |
| Design review (IEC 61160:2005). | |
| Designation for signals and connections. | |
| DESIGNATIONS FOR SIGNALS AND CONNECTIONS. (Endorsed by AENOR in November of 1995.) | |
| DETERMINATION OF HEATS AND TEMPERATURES OF MELTING AND CRYSTALLIZATION OF ELECTRICAL INSULATING MATERIALS BY DIFFERENTIAL SCANNING CALORIMETRY. (Endorsed by AENOR in November of 1995.) | |
| DIGITAL AUDIO TAPE CASSETTE SYSTEM (DAT). PART 1: DIMENSIONS AND CHARACTERISTICS. (Endorsed by AENOR in December of 1995.) | |
| DIGITAL AUDIO TAPE CASSETTE SYSTEM (DAT). PART 2: DAT CALIBRATION TAPE. (Endorsed by AENOR in December of 1995.) | |
| DIGITAL AUDIO TAPE CASSETTE SYSTEM (DAT). PART 3: DAT TAPE PROPERTIES. (Endorsed by AENOR in December of 1995.) | |
| DIGITAL AUDIO TAPE CASSETTE SYSTEM (DAT). PART 5: DAT FOR PROFESSIONAL USE. (Endorsed by AENOR in December of 1995.) | |
| DIGITAL AUDIO TAPE CASSETTE SYSTEM (DAT). PART 6: SERIAL COPY MANAGEMENT SYSTEM. (Endorsed by AENOR in December of 1995.) | |
| DIGITAL AUDIO TAPE RECORDER REEL TO REEL SYSTEM, USING 6,3 MM MAGNETIC TAPE, FOR PROFESSIONAL USE. PART 1: GENERAL REQUIREMENTS. (Endorsed by AENOR in December of 1995.) | |
| DIGITAL AUDIO TAPE RECORDER REEL TO REEL SYSTEM, USING 6,3 MM MAGNETIC TAPE, FOR PROFESSIONAL USE. PART 2: FORMAT A. (Endorsed by AENOR in December of 1995.) | |
| DIGITAL AUDIO TAPE RECORDER REEL TO REEL SYSTEM, USING 6,3 MM MAGNETIC TAPE, FOR PROFESSIONAL USE. PART 3: FORMAT B. (Endorsed by AENOR in December of 1995.) | |
| DIGITAL AUDIO TAPE RECORDER REEL-TO-REEL SYSTEM, USING 6,3 MM MAGNETIC TAPE, FOR PROFESSIONAL USE. PART 4: MAGNETIC TAPE PROPERTIES: DEFINITIONS AND METHODS OF MEASUREMENTS. (Endorsed by AENOR in December of... | |
| DIGITAL AUDIO TAPE RECORDER REEL-TO-REEL SYSTEM, USING 6,3 MM MAGNETIC TAPE, FOR PROFESSIONAL USE. PART 5: REELS. (Endorsed by AENOR in December of 1996.) | |
| Digital data communication for measurement and control - Fieldbus for use in industrial control systems -- Part 3: Data link service definition (Endorsed by AENOR in October of 2004.) | |
| Digital data communication for measurement and control - Fieldbus for use in industrial control systems -- Part 4: Data link protocol specification (Endorsed by AENOR in October of 2004.) | |
| Digital data communication for measurement and control - Fieldbus for use in industrial control systems -- Part 5: Application layer service definition (Endorsed by AENOR in October of 2004.) | |
| Digital data communication for measurement and control - Fieldbus for use in industrial control systems -- Part 6: Application layer protocol specification (Endorsed by AENOR in October of 2004.) | |
| Digital data communication for measurement and control- Fieldbus for use in industrial control systems- Part 2: Physical layer service definition and protocol specification (Endorsed by AENOR in June of 2008.)... | |
| Digital data communication for measurement and control- Fieldbus for use in industrial control systems- Part 3-1: Data Link Layer service definition. Type 1 elements. (Endorsed by AENOR in June of... | |
| Digital data communication for measurement and control- Fieldbus for use in industrial control systems- Part 5-2: Application Layer service definition. 2 type elements (Endorsed by AENOR in July of 2008.)... | |
| Digital data communication for measurement and control- Fieldbus for use in industrial control systems- Part 600: Application Layer protocol specification (Endorsed by AENOR in July of 2008.) | |
| Digital data communications for measurement and control - Fieldbus for use in industrial control systems -- Part 2: Physical layer specification and service definition (Endorsed by AENOR in October of... | |
| Digital recorders for measurements in high-voltage impulse tests - Part 2: Evaluation of software used for the determination of the parameters of impulse waveforms | |
| DIGITAL RECORDERS FOR MEASUREMENTS IN HIGH-VOLTAGE IMPULSE TESTS. PART 1: REQUIREMENTS FOR DIGITAL RECORDERS. | |
| DIMENSIONS OF METAL-SHEATHED THERMOMETER ELEMENTS. (Endorsed by AENOR in April of 1996.) | |
| ELECTRICAL MEASURING INSTRUMENTS - X-T RECORDERS. PART 1: DEFINITIONS AND REQUIREMENTS | |
| ELECTRICAL MEASURING INSTRUMENTS. X-T RECORDERS. PART 1: DEFINITIONS AND REQUIREMENTS. | |
| ELECTRICAL MEASURING INSTRUMENTS. X-T RECORDERS. PART 2: RECOMMENDED ADDITIONAL TEST METHODS. | |
| Electroacoustics - Measurement microphones - Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique | |
| Electroacoustics - Measurement microphones - Part 3: Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique | |
| Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison | |
| Electroacoustics - Measurement microphones -- Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique (Endorsed by AENOR in April of 2011.) | |
| Electroacoustics - Measurement microphones -- Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique | |
| ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES. | |
| Electromechanical contactors for household and similar purposes | |
| ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD ANS SIMILAR PURPOSES | |
| Electromechanical equipment guide for small hydroelectric installantions. | |
| ELECTROMECHANICAL EQUIPMENT GUIDE FOR SMALL HYDROELECTRIC INSTALLATIONS. | |
| EXPRESSION OF PERFORMANCE OF SAMPLE HANDLING SYSTEMS FOR PROCESS ANALYZERS. (Endorsed by AENOR in April of 1996.) | |
| Fibre optic interconnecting devices and passive components - Mechanical splices and fusion splice protectors for optical fibres and cables -- Part 1: Generic specification (Endorsed by AENOR in July of... | |
| FIELDBUS STANDARD FOR USE IN INDUSTRIAL CONTROL SYSTEMS. PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION (Endorsed by AENOR in May of 1996.) | |
| FIELDBUS STANDARD FOR USE IN INDUSTRIAL ONTROL SYSTEMS. PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION (Endorsed by AENOR in November of 1997.) | |
| Global maritime distress and safety system (GMDSS) - Part 14: AIS Search And Rescue Transmitter (AIS-SART) - Operational and performance requirements, methods of testing and required test results (Endorsed by... | |
| Global maritime distress and safety system (GMDSS) - Part 1: Radar transponder - Marine search and rescue (SART) - Operational and performance requirements, methods of testing and required test results... | |
| Global maritime distress and safety system (GMDSS). Part 1: Radar transporder. Marine search and rescue (SART). Operational and performance requirements, methods of testing and required test results. | |
| GLOBAL NAVIGATION SATELLITE SYSTEMS (GNSS). PART 1: GLOBAL POSITIONING SYSTEM (GPS). RECEIVER EQUIPMENT. PERFORMANCE STANDARDS, METHODS OF TESTING AND REQUIRED TEST RESULTS. (Endorsed by AENOR in November of 1997.) | |
| GLOBAL NAVIGATION SATELLITE SYSTEMS (GNSS). PART 1: GLOBAL POSITIONING SYSTEM (GPS). RECEIVER EQUIPMENT. PERFORMANCE STANDARDS, METHODS OF TESTING AND REQUIRED TEST RESULTS. | |
| HAND-HELD ELECTRIC MAINS VOLTAGE OPERATED CIRCULAR SAWS. METHODS FOR MEASURING THE PERFORMANCE. | |
| HELICAL-SCAN DIGITAL COMPOSITE VIDEO CASSETTE RECORDING SYSTEM USING 19 MM MAGNETIC TAPE, FORMA D2 (NTSC, PAL, PAL-M). (Endorsed by AENOR in December of 1995.) | |
| HELICAL-SCAN VIDEO TAPE CASSETTE SYSTEM USING 12,65 MM (0,5 IN) MAGNETIC TAPE ON TYPPE VHS. COMPACT VHS VIDEO CASETTE. | |
| HELICAL-SCAN VIDEO TAPE CASSETTE USING 12,65 MM (0,5 IN) MAGNETIC TAPE. TYPE M2. | |
| HIGH-VOLTAGE ALTERNATING CURRENT CIRCUIT-BREAKERS. GUIDE FOR SEISMIC Qualification of high-voltage alternating current circuit-breakers. | |
| High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment | |
| High-voltage test techniques for low-voltage equipment - Part 1: Definitions, test and procedure requirements | |
| High-voltage test techniques for low-voltage equipment - Part 2: Test equipment | |
| IMPREGNATED INSULATING MATERIALS. APPLICATION OF DISSOLVED GAS ANALYSIS (DGA) TO FACTORY TEST ON ELECTRICAL EQUIPMENT. | |
| Industrial communication networks - Fieldbus specifications - Part 1: Overview and guidance for the IEC 61158 and IEC 61784 series (Endorsed by AENOR in November of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition | |
| Industrial communication networks - Fieldbus specifications - Part 3-11: Data-link layer service definition - Type 11 elements (Endorsed by AENOR in June of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 3-12: Data-link layer service definition - Type 12 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 3-12: Data-link layer service definition - Type 12 elements (Endorsed by AENOR in July of 2012.) | |
| Industrial communication networks - Fieldbus specifications - Part 3-12: Data-link layer service definition - Type 12 elements (Endorsed by AENOR in June of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 3-13: Data-link layer service definition - Type 13 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 3-13: Data-link layer service definition - Type 13 elements (Endorsed by AENOR in June of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 3-14: Data-link layer service definition - Type 14 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 3-14: Data-link layer service definition - Type 14 elements (Endorsed by AENOR in July of 2012.) | |
| Industrial communication networks - Fieldbus specifications - Part 3-14: Data-link layer service definition - Type 14 elements (Endorsed by AENOR in June of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 3-16: Data-link layer service definition - Type 16 elements (Endorsed by AENOR in June of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 3-17: Data-link layer service definition - Type 17 elements (Endorsed by AENOR in June of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 3-18: Data-link layer service definition - Type 18 elements (Endorsed by AENOR in June of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 3-19: Data-link layer service definition - Type 19 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 3-19: Data-link layer service definition - Type 19 elements (Endorsed by AENOR in July of 2012.) | |
| Industrial communication networks - Fieldbus specifications - Part 3-19: Data-link layer service definition - Type 19 elements (Endorsed by AENOR in June of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 3-1: Data-link layer service definition - Type 1 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 3-20: Data-link layer service definition - Type 20 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 3-21: Data-link layer service definition - Type 21 elements (Endorsed by AENOR in July of 2012.) | |
| Industrial communication networks - Fieldbus specifications - Part 3-22: Data-link layer service definition - Type 22 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 3-22: Data-link layer service definition - Type 22 elements (Endorsed by AENOR in July of 2012.) | |
| Industrial communication networks - Fieldbus specifications - Part 3-24: Data-link layer service definition - Type-24 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 3-2: Data-link layer service definition - Type 2 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 3-2: Data-link layer service definition - Type 2 elements (Endorsed by AENOR in June of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 3-2: Data-link layer service definition - Type 2 elements (Endorsed by Asociación Española de Normalización in August of 2019.) | |
| Industrial communication networks - Fieldbus specifications - Part 3-3: Data-link layer service definition - Type 3 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 3-3: Data-link layer service definition - Type 3 elements (Endorsed by AENOR in June of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 3-4: Data-link layer service definition - Type 4 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 3-4: Data-link layer service definition - Type 4 elements (Endorsed by AENOR in June of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 3-7: Data-link layer service definition - Type 7 elements (Endorsed by AENOR in June of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 3-8: Data-link layer service definition - Type 8 elements (Endorsed by AENOR in June of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 4-11: Data-link layer protocol specification - Type 11 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 4-11: Data-link layer protocol specification - Type 11 elements (Endorsed by AENOR in July of 2012.) | |
| Industrial communication networks - Fieldbus specifications - Part 4-12: Data-link layer protocol specification - Type 12 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 4-12: Data-link layer protocol specification - Type 12 elements (Endorsed by AENOR in July of 2012.) | |
| Industrial communication networks - Fieldbus specifications - Part 4-13: Data-link layer protocol specification - Type 13 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 4-13: Data-link layer protocol specification - Type 13 elements | |
| Industrial communication networks - Fieldbus specifications - Part 4-14: Data-link layer protocol specification - Type 14 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 4-14: Data-link layer protocol specification - Type 14 elements (Endorsed by AENOR in July of 2012.) | |
| Industrial communication networks - Fieldbus specifications - Part 4-16: Data-link layer protocol specification - Type 16 elements (Endorsed by AENOR in June of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 4-18: Data-link layer protocol specification - Type 18 elements (Endorsed by AENOR in July of 2012.) | |
| Industrial communication networks - Fieldbus specifications - Part 4-19: Data-link layer protocol specification - Type 19 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 4-19: Data-link layer protocol specification - Type 19 elements (Endorsed by AENOR in July of 2012.) | |
| Industrial communication networks - Fieldbus specifications - Part 4-1: Data-link layer protocol specification - Type 1 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 4-1: Data-link layer protocol specification - Type 1 elements | |
| Industrial communication networks - Fieldbus specifications - Part 4-20: Data-link layer protocol specification - Type 20 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 4-21: Data-link layer protocol specification - Type 21 elements (Endorsed by AENOR in July of 2012.) | |
| Industrial communication networks - Fieldbus specifications - Part 4-22: Data-link layer protocol specification - Type 22 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 4-22: Data-link layer protocol specification - Type 22 elements (Endorsed by AENOR in July of 2012.) | |
| Industrial communication networks - Fieldbus specifications - Part 4-24: Data-link layer protocol specification - Type 24 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 4-2: Data-link layer protocol specification - Type 2 elements (Endorsed by AENOR in July of 2012.) | |
| Industrial communication networks - Fieldbus specifications - Part 4-3: Data-link layer protocol specification - Type 3 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 4-3: Data-link layer protocol specification - Type 3 elements (Endorsed by AENOR in July of 2012.) | |
| Industrial communication networks - Fieldbus specifications - Part 4-4: Data-link layer protocol specification - Type 4 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 4-4: Data-link layer protocol specification - Type 4 elements | |
| Industrial communication networks - Fieldbus specifications - Part 5-10: Application layer service definition - Type 10 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-10: Application layer service definition - Type 10 elements (Endorsed by AENOR in July of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-10: Application layer service definition - Type 10 elements (Endorsed by AENOR in July of 2012.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-11: Application layer service definition - Type 11 elements (Endorsed by AENOR in July of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-12: Application layer service definition - Type 12 elements (Endorsed by AENOR in July of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-12: Application layer service definition - Type 12 elements (Endorsed by AENOR in July of 2012.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-12: Application layer service definition - Type 12 elements (Endorsed by AENOR in November of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-13: Application layer service definition - Type 13 elements (Endorsed by AENOR in July of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-13: Application layer service definition - Type 13 elements (Endorsed by AENOR in November of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-14: Application layer service definition - Type 14 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-14: Application layer service definition - Type 14 elements (Endorsed by AENOR in July of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-14: Application layer service definition - Type 14 elements (Endorsed by AENOR in July of 2012.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-15: Application layer service definition - Type 15 elements (Endorsed by AENOR in July of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-15: Application layer service definition - Type 15 elements (Endorsed by AENOR in July of 2012.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-16: Application layer service definition - Type 16 elements (Endorsed by AENOR in July of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-17: Application layer service definition - Type 17 elements (Endorsed by AENOR in July of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-18: Application layer service definition - Type 18 elements (Endorsed by AENOR in July of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-18: Application layer service definition - Type 18 elements (Endorsed by AENOR in July of 2012.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-19: Application layer service definition - Type 19 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-19: Application layer service definition - Type 19 elements (Endorsed by AENOR in July of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-19: Application layer service definition - Type 19 elements (Endorsed by AENOR in July of 2012.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-20: Application layer service definition - Type 20 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-20: Application layer service definition - Type 20 elements (Endorsed by AENOR in July of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-20: Application layer service definition - Type 20 elements (Endorsed by AENOR in July of 2012.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-21: Application layer service definition - Type 21 elements (Endorsed by AENOR in July of 2012.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-22: Application layer service definition - Type 22 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-22: Application layer service definition - Type 22 elements (Endorsed by AENOR in July of 2012.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-23: Application layer service definition - Type 23 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-24: Application layer service definition - Type-24 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-2: Application layer service definition - Type 2 elements (Endorsed by AENOR in July of 2012.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-2: Application layer service definition - Type 2 elements (Endorsed by AENOR in November of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-3: Application layer service definition - Type 3 elements (Endorsed by AENOR in July of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-3: Application layer service definition - Type 3 elements (Endorsed by AENOR in July of 2012.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-3: Application layer service definition - Type 3 elements (Endorsed by AENOR in November of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-4: Application layer service definition - Type 4 elements (Endorsed by AENOR in July of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-4: Application layer service definition - Type 4 elements (Endorsed by AENOR in November of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-5: Application layer service definition - Type 5 elements (Endorsed by AENOR in July of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-5: Application layer service definition - Type 5 elements (Endorsed by AENOR in November of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-7: Application layer service definition - Type 7 elements (Endorsed by AENOR in July of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-8: Application layer service definition - Type 8 elements (Endorsed by AENOR in July of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-9: Application layer service definition - Type 9 elements (Endorsed by AENOR in July of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 5-9: Application layer service definition - Type 9 elements (Endorsed by AENOR in November of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-10: Application layer protocol specification - Type 10 elements (Endorsed by AENOR in August of 2012.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-10: Application layer protocol specification - Type 10 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-10: Application layer protocol specification - Type 10 elements (Endorsed by AENOR in July of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-11: Application layer protocol specification - Type 11 elements (Endorsed by AENOR in July of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-12: Application layer protocol specification - Type 12 elements (Endorsed by AENOR in August of 2012.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-12: Application layer protocol specification - Type 12 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-12: Application layer protocol specification - Type 12 elements (Endorsed by AENOR in July of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-13: Application layer protocol specification - Type 13 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-13: Application layer protocol specification - Type 13 elements (Endorsed by AENOR in July of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-14: Application layer protocol specification - Type 14 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-14: Application layer protocol specification - Type 14 elements (Endorsed by AENOR in July of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-14: Application layer protocol specification - Type 14 elements | |
| Industrial communication networks - Fieldbus specifications - Part 6-15: Application layer protocol specification - Type 15 elements (Endorsed by AENOR in August of 2012.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-15: Application layer protocol specification - Type 15 elements (Endorsed by AENOR in July of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-16: Application layer protocol specification - Type 16 elements (Endorsed by AENOR in July of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-17: Application layer protocol specification - Type 17 elements (Endorsed by AENOR in July of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-18: Application layer protocol specification - Type 18 elements (Endorsed by AENOR in August of 2012.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-18: Application layer protocol specification - Type 18 elements (Endorsed by AENOR in July of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-19: Application layer protocol specification - Type 19 elements (Endorsed by AENOR in August of 2012.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-19: Application layer protocol specification - Type 19 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-19: Application layer protocol specification - Type 19 elements (Endorsed by AENOR in July of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-20: Application layer protocol specification - Type 20 elements (Endorsed by AENOR in August of 2012.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-20: Application layer protocol specification - Type 20 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-20: Application layer protocol specification - Type 20 elements (Endorsed by AENOR in July of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-21: Application layer protocol specification - Type 21 elements (Endorsed by AENOR in August of 2012.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-22: Application layer protocol specification - Type 22 elements (Endorsed by AENOR in August of 2012.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-22: Application layer protocol specification - Type 22 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-23: Application layer protocol specification - Type 23 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-24: Application layer protocol specification - Type-24 Elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-2: Application layer protocol specification - Type 2 elements (Endorsed by AENOR in August of 2012.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-2: Application layer protocol specification - Type 2 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-3: Application layer protocol specification - Type 3 elements (Endorsed by AENOR in August of 2012.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-3: Application layer protocol specification - Type 3 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-3: Application layer protocol specification - Type 3 elements (Endorsed by AENOR in July of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-4: Application layer protocol specification - Type 4 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-4: Application layer protocol specification - Type 4 elements (Endorsed by AENOR in July of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-5: Application layer protocol specification - Type 5 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-5: Application layer protocol specification - Type 5 elements (Endorsed by AENOR in July of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-7: Application layer protocol specification - Type 7 elements (Endorsed by AENOR in July of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-8: Application layer protocol specification - Type 8 elements. (Endorsed by AENOR in July of 2008.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-9: Application layer protocol specification - Type 9 elements (Endorsed by AENOR in August of 2012.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-9: Application layer protocol specification - Type 9 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial communication networks - Fieldbus specifications - Part 6-9: Application layer protocol specification - Type 9 elements (Endorsed by AENOR in July of 2008.) | |
| Industrial communication networks - Fieldbus specifications -- Part 4-11: Data-link layer protocol specification - Type 11 elements (Endorsed by AENOR in June of 2008.) | |
| Industrial communication networks - Fieldbus specifications -- Part 4-12: Data-link layer protocol specification - Type 12 elements (Endorsed by AENOR in June of 2008.) | |
| Industrial communication networks - Fieldbus specifications -- Part 4-14: Data-link layer protocol specification - Type 14 elements (Endorsed by AENOR in June of 2008.) | |
| Industrial communication networks - Fieldbus specifications -- Part 4-17: Data-link layer protocol specification - Type 17 elements (Endorsed by AENOR in June of 2008.) | |
| Industrial communication networks - Fieldbus specifications -- Part 4-18: Data-link layer protocol specification - Type 18 elements (Endorsed by AENOR in June of 2008.) | |
| Industrial communication networks - Fieldbus specifications -- Part 4-19: Data-link layer protocol specification - Type 19 elements (Endorsed by AENOR in June of 2008.) | |
| Industrial communication networks - Fieldbus specifications -- Part 4-2: Data-link layer protocol specification - Type 2 elements (Endorsed by AENOR in June of 2008.) | |
| Industrial communication networks - Fieldbus specifications -- Part 4-3: Data-link layer protocol specification - Type 3 elements (Endorsed by AENOR in June of 2008.) | |
| Industrial communication networks - Fieldbus specifications -- Part 4-7: Data-link layer protocol specification - Type 7 elements (Endorsed by AENOR in June of 2008.) | |
| Industrial communication networks - Fieldbus specifications -- Part 4-8: Data-link layer protocol specification - Type 8 elements (Endorsed by AENOR in June of 2008.) | |
| Industrial communication networks - Fieldbus specifications -Part 4-2: Data-link layer protocol specification - Type 2 elements (Endorsed by AENOR in December of 2014.) | |
| Industrial systems, installations and equipment and industrial products - Designation of signals (Endorsed by AENOR in June of 2009.) | |
| Industrial systems, installations and equipment and industrial products - Designation of signals - Part 1: Basic rules (Endorsed by AENOR in October of 2015.) | |
| Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 7: Assessment of system safety | |
| Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 8: Assessment of non-task-related system properties | |
| Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 6: Assessment of system operability (Endorsed by AENOR in November of 2016.)... | |
| Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - part 7: Assessment of system safety (Endorsed by AENOR in November of 2016.)... | |
| Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - part 8: Assessment of other system properties (Endorsed by AENOR in November of... | |
| INOBAL MARITIME DISTRESS AND SAFETY SYSTEM (GMDSS). PART 1: RADAR TRANSPORTER. MARINE SEARCH AND RESCUE (SART). OPERATIONAL AND PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS. (Endorsed by AENOR... | |
| Instruments and software used for measurement in high-voltage and high-current tests - Part 2: Requirements for software for tests with impulse voltages and currents | |
| Instruments and software used for measurement in high-voltage impulse tests -- Part 1: Requirements for instruments. | |
| Insulating liquids - Specifications for unused synthetic organic esters for electrical purposes | |
| Insulators for overhead lines - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria | |
| Live working - Electrical insulating blankets | |
| Live working - Electrical insulating matting | |
| LORAN-C RECEIVERS FOR SHIPS. MINIMUM PERFORMANCE STANDARDS. METHODS OF TESTING AND REQUIRED TEST RESULTS. (Endorsed by AENOR in May of 1995.) | |
| Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners (Endorsed by Asociación Española de Normalización in January of 2017.) | |
| Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners | |
| Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 3: Serial data instrument network (Endorsed by AENOR in November of 2014.) | |
| Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 3: Serial data instrument network | |
| Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 450: Multiple talkers and multiple listeners - Ethernet interconnection (Endorsed by AENOR in July of 2016.) | |
| Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 450: Multiple talkers and multiple listeners - Ethernet interconnection (Endorsed by AENOR in November of 2011.) | |
| Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 460: Multiple talkers and multiple listeners - Ethernet interconnection - Safety and security (Endorsed by AENOR in January... | |
| Maritime navigation and radiocommunication equipment and systems - Digital interfaces -- Part 1: Single talker and multiple listeners (Endorsed by AENOR in April of 2001.) | |
| Maritime navigation and radiocommunication equipment and systems - Digital interfaces -- Part 1: Single talker and multiple listeners (Endorsed by AENOR in July of 2008.) | |
| Maritime navigation and radiocommunication equipment and systems - Digital interfaces -- Part 3: Serial data instrument network (Endorsed by AENOR in October of 2010.) | |
| Maritime navigation and radiocommunication equipment and systems - Digital interfaces -- Part 400: Multiple talkers and multiple listeners - Ship systems interconnection - Introduction and general principles (Endorsed by AENOR... | |
| Maritime navigation and radiocommunication equipment and systems - Digital interfaces -- Part 401: Multiple talkers and multiple listeners - Ship systems interconnection - Application profile (Endorsed by AENOR in July... | |
| Maritime navigation and radiocommunication equipment and systems - Digital interfaces -- Part 402: Multiple talkers and multiple listeners - Ship systems interconnection - Documentation and test requirements (Endorsed by AENOR... | |
| Maritime navigation and radiocommunication equipment and systems - Digital interfaces -- Part 410: Multiple talkers and multiple listeners - Ship systems interconnection - Transport profile requirements and basic transport profile... | |
| Maritime navigation and radiocommunication equipment and systems - Digital interfaces -- Part 420: Multiple talkers and multiple listeners - Ship systems interconnection - Companion standard requirements and basic companion standards... | |
| MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - ELECTRONIC CHART DISPLAY AND INFORMATION SYSTEM (ECDIS) - OPERATIONAL AND PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS (Endorsed by AENOR... | |
| Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 4: Shipborne DGPS and DGLONASS maritime radio beacon receiver equipment - Performance requirements, methods of... | |
| Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) -- Part 1: Global positioning system (GPS) - Receiver equipment - Performance standards, methods of testing and... | |
| Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) -- Part 3: Galileo receiver equipment - Performance requirements, methods of testing and required test results (Endorsed... | |
| MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS. DIGITAL INTERFACES. PART 2: SINGLE TALKER AND MUTIPLE LISTENERS, HIGH-SPEED TRANSMISSION (Endorsed by AENOR in February of 1999.) | |
| MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS. GLOBAL NAVIGATION SATELLITE SYSTEMS (GNSS). PART 2: GLOBAL NAVIGATION SATELLITE SYSTEM (GLONASS). RECEIVER EQUIPMENT. PERFORMANCE STANDARDS, METHODS OF TESTING AND REQUIRED TEST RESULTS... | |
| MARITIME NAVIGATION AND RADIOCOMMUNICTION EQUIPMENT AND SYSTEMS. DIGITAL INTERFACES. PART 1: SINGLE TALKER AND MULTIPLE LISTENERS. (Endorsed by AENOR in November of 1997.) | |
| MEASUREMENT AND CHARACTERISATION OF ULTRASONIC FIELDS USING HYDROPHONES IN THE FREQUENCY RANGE 0,5 MHZ TO 15 MHZ. | |
| Measurement microphones - Part 3: Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique | |
| Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison | |
| Measurement microphones -- Part 1: Specifications for laboratory standard microphones. | |
| Measurement microphones -- Part 6: Electrostatic actuators for determination of frequency response | |
| MEASUREMENT MICROPHONES. PART 1: SPECIFICATIONS FOR LABORATORY STANDARD MICROPHONES. | |
| MEASUREMENT MICROPHONES. PART 2: PRIMARY METHOD FOR PRESSURE CALIBRATIon of laboratory standard microphones by the reciprocity technique. | |
| MEASUREMENT MICROPHONES. PART 4: SPECIFICATIONS FOR WORKING STANDARD MICROPHONES. | |
| Measurement microphones. Part 8: Methods for determining the free-field sensitivity of working standard microphones by comparison | |
| Mechanical splices and fusion splice protectors for optical fibres and cables -- Part 1: Generic specification. | |
| METAL HALIDE LAMPS (Endorsed by AENOR in June of 1998.) | |
| Metal halide lamps - Performance specification (Endorsed by AENOR in July of 2016.) | |
| Metal halide lamps - Performance specification (Endorsed by Asociación Española de Normalización in August of 2019.) | |
| Metal halide lamps - Performance specification (Endorsed by Asociación Española de Normalización in December of 2018.) | |
| Metal halide lamps - Performance specification (Endorsed by Asociación Española de Normalización in January of 2019.) | |
| Metal halide lamps - Performance specification | |
| METAL HALIDE LAMPS. (Endorsed by AENOR in April of 1996.) | |
| METAL HALIDE LAMPS. (Endorsed by AENOR in February of 1999.) | |
| METHOD FOR MEASURING THE PERFORMANCE OF TUMBLER DRYERS FOR HOUSEHOLD USE. | |
| METHODS OF MEASUREMENT ON RECEIVERS FOR SATELLITE BROADCAST TRANSMISSIONS IN THE 12 GHZ BAND. PART 1: RADIO-FREQUENCY MEASUREMENTS ON OUTDOOR UNITS. (Endorsed by AENOR in May of 1995.) | |
| METHODS OF MEASUREMENT ON RECEIVERS FOR SATELLITE BROADCAST TRANSMISSIONS IN THE 12 GHZ BAND. PART 2: ELECTRICAL MEASUREMENTS ON DBS TUNER UNITS. (Endorsed by AENOR in May of 1995.) | |
| METHODS OF MEASUREMENT ON RECEIVERS FOR SATELLITE BROADCAST TRANSMISSIONS IN THE 12 GHZ BAND. PART 5: ELECTRICAL MEASUREMENTS ON DECODER UNITS FOR MAC/PACKET SYSTEMS. (Endorsed by AENOR in May of... | |
| METHODS OF MEASUREMENT ON RECEIVING ANTENNAS FOR SATELLITE BROADCAST TRANSMISIONS IN THE 12 GHZ BAND. PART 1: ELECTRICAL MEASUREMENTS ON DBS RECEIVING ANTENNAS. (Endorsed by AENOR in May of 1995.)... | |
| METHODS OF MEASUREMENT ON RECEIVING ANTENNAS FOR SATELLITE BROADCAST TRANSMISIONS IN THE 12 GHZ BAND. PART 1: ELECTRICAL MEASUREMENTS ON DBS RECEIVING ANTENNAS. (Endorsed by AENOR in November of 1999.)... | |
| METHODS OF MEASUREMENT ON RECEIVING ANTENNAS FOR SATELLITE BROADCAST TRANSMISSIONS IN THE 12 GHZ BAND. PART 2: MECHANICAL AND ENVIRONMENTAL TESTS ON INDIVIDUAL AND COLLECTIVE RECEIVING ANTENNAS. (Endorsed by AENOR... | |
| METHODS OF MEASUREMENTS ON RECEIVERS FOR SATELLITE BROADCAST TRANSMISSIONS IN THE 12 GHZ BAND. PART 3: ELECTRICAL MEASUREMENTS OF OVERALL PERFORMANCE OF RECEIVER SYSTEMS COMPRISING AN OUTDOOR UNIT AND A... | |
| METHODS OF MEASURING THE CHARACTERISTICS OF REPRODUCING EQUIPMENT FOR DIGITAL AUDIO COMPACT DISCS. (Endorsed by AENOR in December of 1995.) | |
| METHODS OF MEASURING THE CHARACTERISTICS OF REPRODUCING EQUIPMENT FOR DIGITAL AUDIO COMPACT DISCS. (Endorsed by AENOR in November of 1997.) | |
| Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment | |
| OVERVOLTAGE PROTECTION FOR PHOTOVOLTAIC (PV) POWER GENERATING SYSTEMS. GUIDE. | |
| POWER ELECTRONIC CAPACITORS. PART 1: GENERAL. | |
| POWER ELECTRONIC CAPACITORS. PART 2:REQUIREMENTS FOR DISCONNECTING TEST ON FUSES, DESTRUCTION TEST, SELF-HEALING TEST AND ENDURANCE TEST. | |
| Preparation of documents used in electrotechnology - Part 1: Rules (Endorsed by AENOR in March of 2015.) | |
| Preparation of documents used in electrotechnology - Part 1: Rules | |
| Preparation of documents used in electrotechnology -- Part 1: General requirements. | |
| Preparation of documents used in electrotechnology -- Part 2: Function-oriented diagrams. | |
| PREPARATION OF DOCUMENTS USED IN ELECTROTECHNOLOGY. PART 1: GENERAL REQUIREMENTS. (Endorsed by AENOR in November of 1995.) | |
| PREPARATION OF DOCUMENTS USED IN ELECTROTECHNOLOGY. PART 1: GENERAL REQUIREMENTS. (Endorsed by AENOR in September of 1996.) | |
| PREPARATION OF DOCUMENTS USED IN ELECTROTECHNOLOGY. PART 2: FUNCTION-ORIENTED DIAGRAMS. (Endorsed by AENOR in November of 1995.) | |
| PREPARATION OF DOCUMENTS USED IN ELECTROTECHNOLOGY. PART 3: CONNECTION DIAGRAMS, TABLES AND LISTS. | |
| PREPARATION OF DOCUMENTS USED IN ELECTROTECHNOLOGY. PART 4: LOCATION AND INSTALLATION DOCUMENTS. | |
| PROGRAMABLE CONTROLLERS. PART 2: EQUIPMENT REQUIREMENTS AND TESTS. | |
| Programmable controllers - Part 3: Programming languages (Endorsed by AENOR in July of 2013.) | |
| Programmable controllers - Part 3: Programming languages (Endorsed by AENOR in May of 2004.) | |
| Programmable controllers - Part 6: Functional safety (Endorsed by AENOR in January of 2013.) | |
| Programmable controllers - Part 9: Single-drop digital communication interface for small sensors and actuators (SDCI) (Endorsed by AENOR in January of 2014.) | |
| Programmable controllers -- Part 1: General information | |
| Programmable controllers -- Part 2: Equipment requirements and tests (Endorsed by AENOR in November of 2003.) | |
| Programmable controllers -- Part 2: Equipment requirements and tests (IEC 61131-2:2007). (Endorsed by AENOR in December of 2007.) | |
| Programmable controllers -- Part 2: Equipment requirements and tests. | |
| Programmable controllers -- Part 5: Communications. (Endorsed by AENOR in February of 2002.) | |
| Programmable controllers -- Part 7: Fuzzy control programming. (Endorsed by AENOR in February of 2002.) | |
| PROGRAMMABLE CONTROLLERS. PART 1: GENERAL INFORMATION. | |
| PROGRAMMABLE CONTROLLERS. PART 2: EQUIPMENT REQUIREMENTS AND TESTS. | |
| PROGRAMMABLE CONTROLLERS. PART 3: PROGRAMMING LANGUAGES. | |
| Protection against electric shock - Common aspects for installation and equipment (Endorsed by AENOR in July of 2002.) | |
| Protection against electric shock - Common aspects for installation and equipment (IEC 61140:2001/A1:2004, modified). | |
| Protection against electric shock - Common aspects for installation and equipment | |
| Radiation protection instrumentation - Installed personnel surface contamination monitoring assemblies (IEC 61098:2003, modified). (Endorsed by AENOR in December of 2007.) | |
| RADIO FREQUENCY CONNECTORS. PART 1-1: SINGLE, MULTI-SERIES, DUAL-LANGUAGE BLANK DETAIL SPECIFICATION. (Endorsed by AENOR in October of 1997.) | |
| RADIO FREQUENCY CONNECTORS. PART 33: SECTIONAL SPECIFICATION FOR SERIES BMA R.F. CONNECTORS. (Endorsed by AENOR in November of 1997.) | |
| RADIO FREQUENCY CONNECTORS. PART 36: SECTIONAL SPECIFICATION FOR MICROMINIATURE R.F. COAXIAL CONNECTORS WITH SNAP-ON COUPLING. CHARACTERISTIC IMPEDANCE 50 OHM (TYPE MCX). (Endorsed by AENOR in November of 1997.) | |
| RADIO-FRECUENCY CONNECTORS -- PART 31: R.F. COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 1,0 MM (0,039 IN) WITH SCREW COUPLING - CHARACTERISTIC IMPEDANCE 50 OHMS (TYPE 1,0) (Endorsed by... | |
| RADIO-FRECUENCY CONNECTORS -- PART 32: RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 1,85 MM (0,072 IN) WITH SCREW COUPLING - CHARACTERISTIC IMPEDANCE 50OHMS (TYPE 1,85) (Endorsed by AENOR... | |
| Radio-frequency connectors - Part 11: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 9,5 mm with threaded coupling - Characteristic impedance 50 O (type 4,1-9,5) (Endorsed... | |
| Radio-frequency connectors - Part 16: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 7 mm (0,276 in) with screw coupling - Characteristic impedance 50 ohms (75... | |
| Radio-frequency connectors - Part 1: Generic specification - General requirements and measuring methods (Endorsed by AENOR in April of 2016.) | |
| Radio-frequency connectors - Part 1: Generic specification - General requirements and measuring methods (Endorsed by AENOR in January of 2014.) | |
| Radio-frequency connectors - Part 1: Generic specification - General requirements and measuring methods | |
| Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable networks (type F) | |
| Radio-frequency connectors - Part 26: Sectional specification for TNCA series RF coaxial connectors (Endorsed by AENOR in June of 2013.) | |
| Radio-frequency connectors - Part 35: Sectional specification for 2,92 series RF connectors (Endorsed by AENOR in December of 2011.) | |
| Radio-frequency connectors - Part 37: Sectional specification for STWX8 R.F connectors | |
| Radio-frequency connectors - Part 41: Sectional specification for CQA series quick lock R.F. coaxial connectors (Endorsed by AENOR in September of 2011.) | |
| Radio-frequency connectors - Part 42: Sectional specification for CQN series quick lock RF coaxial connectors (Endorsed by AENOR in May of 2013.) | |
| Radio-frequency connectors - Part 43: Sectional specification for RBMA series blind mating RF coaxial connectors (Endorsed by AENOR in July of 2013.) | |
| Radio-frequency connectors - Part 44: Sectional specification for series SMP push-on radio-frequency coaxial connectors (Endorsed by AENOR in August of 2013.) | |
| Radio-frequency connectors - Part 47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 O cable networks (type F-Quick) (Endorsed by AENOR in August of... | |
| Radio-frequency connectors - Part 47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 O cable networks (type F-Quick) | |
| Radio-frequency connectors - Part 48: Sectional specification for series BMP R.F. coaxial connectors (Endorsed by AENOR in April of 2015.) | |
| Radio-frequency connectors - Part 49: Sectional specification for SMAA series R.F connectors (Endorsed by AENOR in January of 2015.) | |
| Radio-frequency connectors - Part 50: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 4,11 mm with quick lock system - Characteristic impedance 50 Ohm (type QMA)... | |
| Radio-frequency connectors - Part 51: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 13,5 mm with bayonet lock - Characteristic impedance 50 Ohm (type QLI) (Endorsed... | |
| Radio-frequency connectors - Part 52: Sectional specification for series MMCX RF coaxial connectors (Endorsed by AENOR in November of 2015.) | |
| Radio-frequency connectors - Part 53: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 16 mm with screw lock - Characteristic impedance 50 O (Type S7-16) (Endorsed... | |
| Radio-frequency connectors - Part 54: Sectional specification for coaxial connectors with 10 mm inner diameter of outer conductor, nominal characteristic impedance 50 O, series 4,3-10 (Endorsed by Asociación Española de... | |
| Radio-frequency connectors - Part 58: Sectional specification for RF coaxial connectors with blind-mate coupling - Characteristic impedance 50 O (type SBMA) (Endorsed by Asociación Española de Normalización in January of... | |
| Radio-frequency connectors - Part 58: Sectional specification for RF coaxial connectors with blind-mate coupling - Characteristic impedance 50 O (type SBMA) (Endorsed by Asociación Española de Normalización in October of... | |
| Radio-frequency connectors - Part 59: Sectional specification for type L32-4 and L32-5 threaded multi-pin radio-frequency connectors | |
| Radio-frequency connectors - Part 71: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 5 mm - Characteristic impedance 50 Ohms - type NEX10® | |
| Radio-frequency connectors -- Part 14: R.F. coaxial connectors with inner diameter of outer conductor 12 mm with screw coupling - Characteristic impedance 75 ohms (Type 3.5/12) (Endorsed by AENOR in... | |
| Radio-frequency connectors -- Part 18: Sectional specification - Radio frequency coaxial connectors of type SSMA (Endorsed by AENOR in July of 2011.) | |
| Radio-frequency connectors -- Part 19: Sectional specification - Radio frequency coaxial connectors of type SSMB (Endorsed by AENOR in July of 2011.) | |
| Radio-frequency connectors -- Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (type F) (Endorsed by AENOR in... | |
| Radio-frequency connectors -- Part 29: Sectional specification - Miniature radio frequency coaxial connectors model screw, snap-on, push-pull or quick-lock, slide-in (rack and panel applications) - Characteristic impedance 50 ohms (type... | |
| Radio-frequency connectors -- Part 2: Sectional specification - Radio frequency coaxial connectors of type 9,52 (Endorsed by AENOR in May of 2002.) | |
| Radio-frequency connectors -- Part 2: Sectional specification - Radio frequency coaxial connectors of type 9,52 (IEC 61169-2:2007). (Endorsed by AENOR in July of 2007.) | |
| Radio-frequency connectors -- Part 38: Sectional specification - Radio frequency coaxial connectors model, slide-in (rack and panel applications) - Characteristic impedance 50 O (type TMA) - 50 O applications (Endorsed... | |
| Radio-frequency connectors -- Part 39: Sectional specification for CQM series quick lock RF connectors (Endorsed by AENOR in September of 2011.) | |
| Radio-frequency connectors -- Part 40: Sectional specification for 2.4 series RF connectors (Endorsed by AENOR in September of 2011.) | |
| Radio-frequency connectors -- Part 8: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 50 ohms (type... | |
| Radio-frequency connectors -Part 45: Sectional specification for series SQMA series quick lock RF coaxial connectors (Endorsed by AENOR in October of 2014.) | |
| RADIOTHERAPY SIMULATORS. FUNCTIONAL PERFORMANCE CHARACTERISTICS. | |
| REFERENCE TAPES FOR VIDEO TAPE RECORDER SYSTEMS. (Endorsed by AENOR in December of 1995.) | |
| Reliability block diagrams (Endorsed by Asociación Española de Normalización in January of 2017.) | |
| Reliability growth - Statistical test and estimation methods | |
| Reliability stress screening -- Part 1: Repairable assemblies manufactured in lots (IEC 61163-1:2006). (Endorsed by AENOR in May of 2007.) | |
| Reliability stress screening -- Part 1: Repairable assemblies manufactured in lots | |
| Reliability testing - Compliance tests for constant failure rate and constant failure intensity (Endorsed by AENOR in October of 2012.) | |
| Reliability testing - Compliance tests for constant failure rate and constant failure intensity | |
| REQUIREMENTS FOR THE DECLARATION OF THE ACOUSTIC OUTPUT OF MEDICAL DIAGNOSTIC ULTRASONIC EQUIPMENT. | |
| SEMICONDUCTOR POWER CONVECTORS. ADJUSTABLE SPEED ELECTRIC DRIVE SYSTEMS. GENERAL REQUIREMENTS. PART 1: RATING SPECIFICATIONS, PARTICULARY FOR D.C. MOTOR DRIVES. | |
| SPECIFICATION FOR COATINGS FOR LOADED PRINTED WIRE BOARDS (CONFORMAL COATINGS). PART 1: DEFINITIONS, CLASSIFICATION AND GENERAL REQUIREMENTS. | |
| SPECIFICATION FOR COATINGS FOR LOADED PRINTED WIRE BOARDS (CONFORMAL COATINGS). PART 2: METHODS OF TEST. | |
| SPECIFICATIONS FOR UNUSED SYNTHETIC ORGANIC ESTERS FOR ELECTRICAL PURPOSES. | |
| Standard means for the reporting of the acoustic output of medical diagnostic ultrasonic equipment (Endorsed by AENOR in May of 2013.) | |
| Standard means for the reporting of the acoustic output of medical diagnostic ultrasonic equipment (IEC 61157:2007). (Endorsed by AENOR in March of 2008.) | |
| Still video floppy disk magnetic recording system | |
| SYSTEM OMEGA AND DIFFERENTIAL OMEGA RECEIVERS FOR SHIPS. OPERATIONAL AND PERFORMANCE REQUIREMENTS. METHODS OF TESTING AND REQUIRED TEST RESULTS. (Endorsed by AENOR in May of 1995.) | |
| Terminal markings for valve device stacks and assemblies and for power conversion equipment (Endorsed by AENOR in March of 2012.) | |
| Test method for the determination of oxygen index of insulating liquids | |
| THE ABSOLUTE CALIBRATION OF HYDROPHONES USING THE PLANAR SCANNING TECHNIQUE IN THE FREQUENCY RANGE 0,5 MHZ TO 15 MHZ. | |
| Tin and tin alloys - Pewter and pewterware - Part 1: Pewter | |
| Tin and tin alloys - Pewter and pewterware - Part 2: Pewterware | |
| Tumble dryers for household use - Methods for measuring the performance. | |
| Tumble dryers for household use - Methods for measuring the performance | |
| ULTRASONIC POWER MEASUREMENT IN LIQUIDS IN THE FREQUENCY RANGE 0,5 MHZ TO 25 MHZ. | |
| ULTRASONIC POWER MEASUREMENT IN LIQUIDS IN THE FREQUENCY RANGE 0,5 MHZ TO 25 MHZ | |
| Ultrasonics - Power measurement - Radiation force balances and performance requirements (Endorsed by AENOR in May of 2013.) | |
| Ultrasonics - Power measurement - Radiation force balances and performance requirements (Endorsed by AENOR in October of 2009.) | |
| Unused hydrocarbon-based insulating liquids - Test methods for evaluating the oxidation stability | |
| VIDEO CAMERAS (PAL/SECAM/NTSC) - METHODS OF MEASUREMENT - PART 1: NON-BROADCAST SINGLE-SENSOR CAMERAS. (Endorsed by AENOR in December of 1997.) | |
| VIDEO CAMERAS (PAL/SECAM/NTSC) METHODS OF MEASUREMENT. PART 3: NON-BROADCAST CAMERA-RECORDERS (Endorsed by AENOR in June of 1998.) | |
| VIDEO CAMERAS (PAL/SECAM/NTSC). METHDOS OF MEASUREMENTS. PART 4: AUTOMATIC FUNCTIONS OF VIDEO CAMERAS AND CAMERA-RECORDERS (Endorsed by AENOR in November of 1998.) | |
| VIDEO CAMERAS (PAL/SECAM/NTSC). METHODS OF MEASUREMENT. PART 2: TWO AND THREE SENSOR PROFFESIONAL CAMERAS (Endorsed by AENOR in June of 1998.) | |
| VIDEODISKS. METHODS OF MEASUREMENTS FOR PARAMETERS. (Endorsed by AENOR in December of 1995.) |
| << Prev | Next >> |