AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
60
70
80
90
100
110
117
118
119
120
121
122
123
124
125
126
127
128
129
130
140
150
160
170
180
| Product Name | Notes |
|---|---|
| A.C. metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV. | |
| Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode I - GIC (Endorsed by AENOR in January of 2016.) | |
| Aerospace series - Fibre reinforced plastics - Test method - Determination of in-plane shear properties (± 45° tensile test) (Endorsed by AENOR in January of 2016.) | |
| Aerospace series - Fibre reinforced plastics - Test method - Determination of the glass transition temperatures (Endorsed by AENOR in January of 2016.) | |
| Aerospace series - Rod-ends, adjustable, single fork with UNJ threaded shank min. engagement: 1,5 x thread diameter in corrosion resisting steel - Dimensions and loads - Inch series (Endorsed by... | |
| ALKALINE SECONDARY CELLS AND BATTERIES. SEALED NICKEL-CADMIUM CYLINDRICAL RECHARGEABLE SINGLE CELLS. | |
| ALKALINE SECONDARY CELLS AND BATTERIES. SEALED NICKEL-CADMIUM CYLINDRICAL RECHARGEABLE SINGLE CELLS | |
| Aluminium and aluminium alloys - Wrought forging stock - Part 1: Technical conditions for inspection and delivery | |
| Aluminium and aluminium alloys - Wrought forging stock - Part 2: Mechanical properties | |
| Aluminium and aluminium alloys - Wrought forging stock - Part 3: Tolerances on dimensions and form | |
| Aluminium and aluminium alloys. Wrought forging stock. Part 3: Tolerances on dimensions and form. | |
| Appliance coupler for household and similar general purposes. Part 2-3: Appliance coupler with a degree of protection higher than IPX0 | |
| Appliance couplers for household and similar general purposes - Part 1: General requirements | |
| Appliance couplers for household and similar general purposes - Part 2-1: Sewing machine couplers | |
| Appliance couplers for household and similar general purposes - Part 2-2: Interconnection couplers for household and similar equipment | |
| Appliance couplers for household and similar general purposes - Part 2-3: Appliance coupler with a degree of protection higher than IPX0 | |
| Appliance couplers for household and similar general purposes - Part 2-4: Appliance couplers dependent on appliance weight for engagement | |
| Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges | |
| APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES. PART 1: GENERAL REQUIREMENTS. | |
| APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES. PART 2: INTERCONNEXION COUPLERS FOR HOUSEHOLD AND SIMILAR EQUIPMENT. | |
| Definitions and nomenclature for carbon brushes, brush-holders, commutators and slip-rings | |
| DEPENDABILITE MANAGEMENT. PART 2: DEPENDABILITY PROGRAMME ELEMENTS AND tasks. | |
| Dependability management - Part 1: Dependability management systems | |
| Dependability management - Part 1: Guidance for management and application | |
| Dependability management - Part 2: Guidelines for dependability management | |
| Dependability management - Part 3-12: Application guide - Integrated logistic support (Endorsed by AENOR in July of 2011.) | |
| Dependability management - Part 3-12: Application guide - Integrated logistic support | |
| Dependability management - Part 3-3: Application guide - Life cycle costing (Endorsed by Asociación Española de Normalización in June of 2017.) | |
| Dependability management - Part 3-3: Application guide - Life cycle costing | |
| Dependability management -- Part 3-11: Application guide - Reliability centred maintenance (Endorsed by AENOR in February of 2010.) | |
| Dependability management -- Part 3-11: Application guide - Reliability centred maintenance | |
| Dependability management -- Part 3-12: Application guide - Integrated logistic support (IEC 60300-3-12:2001). | |
| Dependability management -- Part 3-14: Application guide - Maintenance and maintenance support (IEC 60300-3-14:2004) | |
| Dependability management -- Part 3-15: Application guide - Engineering of system dependability (Endorsed by AENOR in February of 2010.) | |
| Dependability management -- Part 3-15: Application guide - Engineering of system dependability | |
| Dependability management -- Part 3-16: Application guide - Guidelines for specification of maintenance support services (Endorsed by AENOR in March of 2009.) | |
| Dependability management -- Part 3-16: Application guide - Guidelines for specification of maintenance support services | |
| Dependability management -- Part 3-1: Application guide - Analysis techniques for dependability - Guide on methodology | |
| Dependability management -- Part 3-2: Application guide - Collection of dependability data from the field | |
| Dependability management -- Part 3-4: Application guide - Guide to the specification of dependability requirements (Endorsed by AENOR in March of 2009.) | |
| Dependability management -- Part 3-4: Application guide - Guide to the specification of dependability requirements | |
| DEPENDABILITY MANAGEMENT. PART 1: DEPENDABILITY PROGRAMME MANAGEMENT. | |
| Electric irons for household or similar use - Methods for measuring performance (IEC 60311:2002/A1:2005) | |
| Electric irons for household or similar use - Methods for measuring performance. | |
| Electric irons for household or similar use - Methods for measuring performance | |
| ELECTRIC IRONS FOR HOUSEHOLD OR SIMILAR USE. METHODS FOR MEASURING PERFORMANCE. | |
| Electrical relays - Part 22-6: Electrical disturbance tests for measuring relays and protection equipment - Immunity to conducted disturbances induced by radio frequency fields | |
| Electrical relays - Part 22-7: Electrical disturbance tests for measuring relays and protection equipment - Power frequency immunity tests | |
| Electrical relays - Part 25: Electromagnetic emission tests for measuring relays and protection equipment | |
| Electrical relays - Part 3: Single input energizing quantity measuring relays with dependent or independent time | |
| Electrical relays - Part 5: Insulation coordination for measuring relays and protection equipment - Requirements and tests | |
| Electrical relays - Part 8: Thermal electrical relays | |
| Electrical relays -- Part 22-3: Electrical disturbance tests for measuring relays and protection equipment - Radiated electromagnetic field disturbance tests. | |
| Electrical relays -- Part 22-4: Electrical disturbance tests for measuring relays and protection equipment - Electrical fast transient/burst immunity test. | |
| Electrical relays -- Part 22-5: Electrical disturbance tests for measuring relays and protection equipment - Surge immunity test. | |
| Electrical relays -- Part 24: Common format for transient data exchange (COMTRADE) for power systems. (Endorsed by AENOR in August of 2001.) | |
| Electrical relays -- Part 26 : Electromagnetic compatibility requirements for measuring relays and protection equipment | |
| ELECTRICAL RELAYS. PART 23: CONTACT PERFORMANCE. | |
| ELECTRICAL RELAYS. PART 6: MEASURING RELAYS AND PROTECTION EQUIPMENT. | |
| Electroacoustics - Simulators of human head and ear - Part 3: Acoustic coupler for the calibration of supra-aural earphones used in audiometry (Endorsed by AENOR in March of 2015.) | |
| Electroacoustics - Simulators of human head and ear - Part 3: Acoustic coupler for the calibration of supra-aural earphones used in audiometry | |
| Electroacoustics - Simulators of human head and ear -- Part 1: Ear simulator for the measurement of supra-aural and circumaural earphones | |
| Electroacoustics - Simulators of human head and ear -- Part 4: Occluded-ear simulator for the measurement of earphones coupled to the ear by means of ear inserts | |
| Electroacoustics - Simulators of human head and ear -- Part 5: 2 cm³ coupler for the measurement of hearing aids and earphones coupled to the ear by means of ear... | |
| Electroacoustics- Simulators of human head and ear- Part 6: Mechanical coupler for the measurements on bone vibrators | |
| ELECTROACOUSTICS. SIMULATORS OF HUMAN HEAD AND EAR. PART 1: EAR SIMULATOR FOR THE CALIBRATION OF SUPRA-AURAL EARPHONES. | |
| ELECTROACOUSTICS. SIMULATORS OF HUMAN HEAD AND EAR. PART 2: AN INTERIM ACOUSTIC COUPLER FOR THE CALIBRATION OF AUDIOMETRIC EARPHONES IN THE EXTENDED HIGH-FREQUENCY RANGE. | |
| Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear | |
| FUSE-HOLDERS FOR MINIATURE CARTRIDGE FUSE-LINKS. | |
| High-voltage fuses - Part 1: Current-limiting fuses | |
| High-voltage fuses -- Part 1: Current-limiting fuses (IEC 60282-1:2005) | |
| High-voltage fuses -- Part 1: Current-limiting fuses | |
| HIGH-VOLTAGE FUSES. PART 1: CURRENT-LIMITING FUSES. | |
| High-voltage switches -- Part 1: Switches for rated voltages above 1 kV and less than 52 kV | |
| HIGH-VOLTAGE SWITCHES. PART 1: SWITCHES FOR RATED VOLTAGES ABOVE 1 KV AND LESS THAN 52 KV. | |
| HIGH-VOLTAGE SWITCHES. PART 2: HIGH-VOLTAGE SWITCHES FOR RATED VOLTAGEs of 52 kV and above. | |
| HIGH-VOLTAGE SWITCHES. PART 2: HIGH-VOLTAGE SWITCHES FOR RATED VOLTAGES OF 52 KV AND ABOVE | |
| High-voltage test techniques - Partial discharge measurements. | |
| High-voltage test techniques - Partial discharge measurements | |
| Household electric blankets - Methods for measuring performance | |
| Hydraulic turbines - Testing of control systems (IEC 60308:2005). | |
| Insulators for overhead lines with a nominal voltage above 1 kV - Ceramic or glass insulator units for a.c. systems - Characteristics of insulator units of the cap and pin... | |
| LOW VOLTAGE FUSES. PART 1: GENERAL REQUIREMENTS. | |
| Low-voltage fuses - Part 1: General requirements (Endorsed by AENOR in January of 2015.) | |
| Low-voltage fuses - Part 1: General requirements | |
| Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices | |
| Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems | |
| Low-voltage fuses -- Part 1: General requirements | |
| Low-voltage fuses -- Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application). | |
| Low-voltage fuses -- Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) | |
| Low-voltage fuses -- Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) | |
| Low-voltage fuses -- Part 4-1: Supplementary requirements for fuse-links for the protection of semiconductor devices - Sections I to III: Examples of types of standardized fuse-links | |
| Low-voltage fuses -- Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices (IEC 60269-4:2006). (Endorsed by AENOR in December of 2007.) | |
| Low-voltage fuses -- Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices | |
| LOW-VOLTAGE FUSES. PART 1: GENERAL REQUIREMENTS. | |
| LOW-VOLTAGE FUSES. PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION). | |
| LOW-VOLTAGE FUSES. PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY INDUSTRIAL APPLICATION). | |
| LOW-VOLTAGE FUSES. PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS). | |
| LOW-VOLTAGE FUSES. PART 4: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SEMICONDUCTOR DEVICES. | |
| LOW-VOLTAGE FUSES. PART1: GENERAL REQUIREMENTS | |
| Measurement of the dimensions of a cylindrical component with axial terminations (Endorsed by AENOR in November of 2012.) | |
| Measuring relays and protection equipment - Part 22-2: Electrical disturbance tests - Electrostatic discharge tests | |
| Measuring relays and protection equipment - Part 22-3: Electrical disturbance tests - Radiated electromagnetic field immunity | |
| Measuring relays and protection equipment - Part 22-4: Electrical disturbance tests - Electrical fast transient/burst immunity test | |
| Measuring relays and protection equipment - Part 22-5: Electrical disturbance tests - Surge immunity test | |
| Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements (Endorsed by AENOR in January of 2014.) | |
| Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements (Endorsed by AENOR in November of 2013.) | |
| Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements | |
| Measuring relays and protection equipment - Part 27: Product safety requirements (Endorsed by AENOR in June of 2014.) | |
| Measuring relays and protection equipment - Part 27: Product safety requirements | |
| Mechanical structures for electrical and electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-109: Dimensions of chassis for embedded computing devices (Endorsed... | |
| Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-107: Dimensions of subracks and plug-in units, small form factor (Endorsed... | |
| Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-108: Dimensions of R-type subracks and plug-in units (Endorsed by AENOR... | |
| Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 3-100: Basic dimensions of front panels, subracks, chassis, racks and cabinets... | |
| Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 3-101: Subracks and associated plug-in units (Endorsed by AENOR in November... | |
| Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 3-102: Injector/extractor handle (Endorsed by AENOR in November of 2004.) | |
| Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 3-103: Keying and alignment pin (Endorsed by AENOR in November of... | |
| Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 3-104: Connector dependent interface dimensions of subracks and plug-in units (IEC... | |
| Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 3-105: Dimensions and design aspects for 1U high chassis (Endorsed by... | |
| Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 3-106: Adaptation dimensions for subracks and chassis applicable with metric cabinets... | |
| Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 4: Subracks and associated plug-in units - Additional dimensions | |
| Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 5-100: Subracks and associated plug-in units - Design overview. | |
| Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 5-101: Subracks and associated plug-in units - Injector/extractor handle. | |
| Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 5-102: Subracks and associated plug-in units - Electromagnetic shielding provision. | |
| Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 5-103: Subracks and associated plug-in units - Electrostatic discharge protection. | |
| Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 5-104: Subracks and associated plug-in units - Keying. | |
| Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 5-105: Subracks and associated plug-in units - Alignment and/or earth pin. | |
| Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 5-107: Subracks and associated plug-in units - Rear mounted plug-in units. | |
| MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT. DIMENSIONS OF MECHANICAL STRUCTURES OF THE 482,6 MM (19 IN) SERIES. PART 4: SUBRACKS AND ASSOCIATED PLUG-IN UNITS. ADDITIONAL DIMENSIONS. | |
| Methods of measurement on radio receivers for various classes of emission - Part 4: Receivers for frequency-modulated sound broadcasting emissions (Endorsed by Asociación Española de Normalización in March of 2026.)... | |
| Methods of measurement on radio receivers for various classes of emission - Part 7: Methods of measurement on digital satellite radio (DSR) receivers | |
| METHODS OF MEASUREMENT ON RADIO RECEIVERS FOR VARIOUS CLASSES OF EMISSION. PART 3: RECEIVERS FOR AMPLITUDE-MODULATED SOUND-BROADCASTING EMISSIONS (Endorsed by AENOR in November of 2001.) | |
| METHODS OF MEASUREMENT ON RADIO RECEIVERS FOR VARIOUS CLASSES OF EMISSION. PART 3: RECEIVERS FOR AMPLITUDE-MODULATED SOUND-BROADCASTING EMISSIONS. (Endorsed by AENOR in November of 2001.) | |
| METHODS OF MEASUREMENT ON RADIO RECEIVERS FOR VARIOUS CLASSES OF EMISSION. PART 4: RECEIVERS FOR FRECUENCY-MODULATED SOUND BROADCASTING EMISSIONS | |
| METHODS OF MEASUREMENT ON RADIO RECEIVERS FOR VARIOUS CLASSES OF EMISSION. PART 9: MEASUSREMENT OF THE CHARACTERISTICS RELEVANT TO RADIO DATA SYTEMS (RDS) RECEPTION. | |
| Packaging of components for automatic handling ¿ Part 3-1: Packaging of surface mount components on continuous tapes - Type V - Pressed carrier tapes (Endorsed by AENOR in December of... | |
| Packaging of components for automatic handling ¿ Part 3-2: Packaging of surface mount components on continuous tapes - Type VI - Blister carrier tapes of 4 mm width (Endorsed by... | |
| Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes (Endorsed by Asociación Española de Normalización in December of 2017.) | |
| Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes (Endorsed by Asociación Española de Normalización in July of 2021.) | |
| Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes | |
| Packaging of components for automatic handling - Part 2: Packaging of components with unidirectional leads on continuous tapes (Endorsed by AENOR in July of 2015.) | |
| Packaging of components for automatic handling - Part 2: Packaging of components with unidirectional leads on continuous tapes (Endorsed by AENOR in March of 2009.) | |
| Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes (Endorsed by AENOR in September of 2013.) | |
| Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes | |
| Packaging of components for automatic handling - Part 4: Stick magazines for electronic components encapsulated in packages of different forms (Endorsed by AENOR in January of 2014.) | |
| Packaging of components for automatic handling - Part 4: Stick magazines for electronic components encapsulated in packages of form E and G | |
| Packaging of components for automatic handling - Part 5: Matrix trays | |
| Packaging of components for automatic handling -- Part 2: Tape packaging of components with unidirectional leads on continuous tapes. | |
| Packaging of components for automatic handling -- Part 6: Bulk case packaging for surface mounting components | |
| PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING. PART 2: TAPE PACKAGING OF COMPONENTS WITH UNIDIRECTION LEADS ON CONTINUOUS TAPES. | |
| PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING. PART 3: PACKAGING OF SURFACE MOUNT COMPONENTS ON CONTINUOUS TAPES. | |
| PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING. PART 5: MATRIX TRAYS | |
| PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING. PART 6: BULK CASE PACKAGING FOR SURFACE MOUNTING COMPONENTS. | |
| Packaging of winding wires -- Part 1: Containers for round winding wires | |
| Packaging of winding wires -- Part 2-1: Cylindrical barrelled delivery spools - Basic dimensions | |
| Packaging of winding wires -- Part 2-2: Cylindrical barelled delivery spools - Specification for returnable spools made from thermoplastic material. | |
| Packaging of winding wires -- Part 2-3: Cylindrical barelled delivery spools - Specification for non-returnable spools made from thermoplastic material. | |
| Packaging of winding wires -- Part 3-1: Taper barrelled delivery spools - Basic dimensions. | |
| Packaging of winding wires -- Part 3-1: Taper barrelled delivery spools - Basic dimensions | |
| PACKAGING OF WINDING WIRES -- PART 3-2: TAPER BARRELLED DELIVERY SPOOLS - SPECIFICATION FOR RETURNABLE SPOOL MADE FROM THERMOPLASTIC MATERIAL | |
| Packaging of winding wires -- Part 3-3: Taper barelled delivery spools - Specification for non-returnable spools made from thermoplastic material. | |
| PACKAGING OF WINDING WIRES -- PART 3-4: TAPER BARRELLED DELIVERY SPOOLS - BASIC DIMENSIONS OF CONTAINERS FOR TAPER BARRELLED DELIVERY SPOOLS | |
| PACKAGING OF WINDING WIRES -- PART 3-5: TAPER BARRELLED DELIVERY SPOOLS - SPECIFICATION FOR SPOOL CONTAINERS MADE FROM THERMOPLASTIC MATERIAL | |
| Packaging of winding wires -- Part 4-1: Methods of test - Delivery spools made from thermoplastic materials | |
| Packaging of winding wires -- Part 4-2: Methods of test - Containers made from thermoplastic material for taper barelled delivery spools. | |
| Packaging of winding wires -- Part 5-1: Cylindrical barrelled delivery spools with conical flanges - Basic dimensions | |
| Packaging of winding wires -- Part 5-2: Cylindrical barrelled delivery spools with conical flanges - Specification for returnable spools made from thermoplastic material. | |
| PACKAGING OF WINDING WIRES. PART 1: CONTAINERS FOR ROUND WINDING WIRES. | |
| PACKAGING OF WINDING WIRES. PART 2: CYLINDRICAL BARRELLED DELIVERY SPOOLS. SECTION 1: BASIC DIMENSIONS. | |
| PACKAGING OF WINDING WIRES. PART 2: CYLINDRICAL BARRELLED DELIVERY SPOOLS. SECTION 2: SPECIFICATION FOR RETURNABLE SPOOLS MADE FROM THERMOPLASTIC MATERIAL. | |
| PACKAGING OF WINDING WIRES. PART 2: CYLINDRICAL BARRELLED DELIVERY SPOOLS. SECTION 3: SPECIFICATION FOR NON-RETURNABLE SPOOLS MADE FROM THERMOPLASTIC MATERIAL. | |
| PACKAGING OF WINDING WIRES. PART 3: TAPER BARRELLED DELIVERY SPOOLS. SECTION 1: BASIC DIMENSIONS. | |
| PACKAGING OF WINDING WIRES. PART 3: TAPER BARRELLED DELIVERY SPOOLS. SECTION 2: SPECIFICATION FOR RETURNABLE SPOOLS MADE FROM THERMOPLASTIC MATERIAL. | |
| PACKAGING OF WINDING WIRES. PART 3: TAPER BARRELLED DELIVERY SPOOLS. SECTION 3: SPECIFICATION FOR NON-RETURNABLE SPOOLS MADE FROM THERMOPLASTIC MATERIAL. | |
| PACKAGING OF WINDING WIRES. PART 3: TAPER BARRELLED DELIVERY SPOOLS. SECTION 4: BASIC DIMENSIONS OF CONTAINERS FOR TAPER BARRELLED DELIVERY SPOOLS. | |
| PACKAGING OF WINDING WIRES. PART 3: TAPER BARRELLED DELIVERY SPOOLS. SECTION 5: SPECIFICATION FOR SPOOL CONTAINERS MADE FORM THERMOPLASTIC MATERIAL. | |
| PACKAGING OF WINDING WIRES. PART 4: METHODS OF TEST. SECTION 1: DELIVERY SPOOLS MADE FROM THERMOPLASTIC MATERIAL. | |
| PACKAGING OF WINDING WIRES. PART 4: METHODS OF TEST. SECTION 2: CONTAINERS MADE FROM THERMOPLASTIC MATERIAL FOR TAPER BARRELLED DELIVERY SPOOLS. | |
| PACKAGING OF WINDING WIRES. PART 5-1: CYLINDRICAL BARRELLED DELIVERY SPOOLS WITH CONICAL FLANGES. BASIC DIMENSIONS. | |
| Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements | |
| Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories | |
| Plugs, socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outlets and connectors with or without interlock | |
| Plugs, socket-outlets and couplers for industrial purposes -- Part 1: General requirements (IEC 60309-1:1999/A1:2005 , modified). | |
| Plugs, socket-outlets and couplers for industrial purposes -- Part 1: General requirements. | |
| Plugs, socket-outlets and couplers for industrial purposes -- Part 1: General requirements | |
| Plugs, socket-outlets and couplers for industrial purposes -- Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories (IEC 60309-2:1999/A1:2005 , modified). | |
| Plugs, socket-outlets and couplers for industrial purposes -- Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories. | |
| Plugs, socket-outlets and couplers for industrial purposes -- Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories | |
| Plugs, socket-outlets and couplers for industrial purposes -- Part 4: Switched socket-outlets and connectors with or without interlock | |
| PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES. PART 1: GENERAL REQUIREMENTS. | |
| PLUGS, SOCKET-OUTLETS AND COUPLES FOR INDUSTRIAL PURPOSES. PART 1: GENERAL REQUIREMENTS. | |
| PLUGS, SOCKET-OUTLETS AND COUPLES FOR INDUSTRIAL PURPOSES. PART 2: DIMENSIONAL INTERCHANGEABILITY REQUERIMENTS FOR PIN AND CONTACT-TUBE ACCESORIES OF HARMONIZED CONFIGURATIONS. | |
| PLUGS, SOCKET-OUTLETS AND COUPLES FOR INDUSTRIAL PURPOSES. PART 2: DIMENSIONAL INTERCHANGEABILITY REQUERIMENTS FOR PIN AND CONTACT-TUBE ACCESORIES. | |
| Preferred diameters of wire terminations of capacitors and resistors (Endorsed by AENOR in November of 2012.) | |
| Radiation protection instrumentation - Alpha, beta and alpha/beta (beta energy > 60 keV) contamination meters and monitors | |
| Railway applications - Electric equipment for rolling stock - Rules for power resistors of open construction. | |
| Railway applications - Traction transformers and inductors on board rolling stock | |
| RAILWAY APPLICATIONS. TRACTION TRANSFORMERS AND INDUCTORS ON ROLLING STOCK. | |
| REACTORS. | |
| Reactors | |
| Sound system equipment - Part 16: Objective rating of speech intelligibility by speech transmission index (Endorsed by AENOR in November of 2011.) | |
| SOUND SYSTEM EQUIPMENT - PART 16: OBJECTIVE RATING OF SPEECH INTELLIGIBILITY BY SPEECH TRANSMISSION INDEX | |
| Sound system equipment - Part 3: Amplifiers (Endorsed by AENOR in August of 2013.) | |
| Sound system equipment - Part 3: Amplifiers | |
| Sound system equipment - Part 4: Microphones (Endorsed by AENOR in October of 2014.) | |
| Sound system equipment - Part 4: Microphones | |
| Sound system equipment - Part 7: Headphones and earphones (Endorsed by Asociación Española de Normalización in January of 2021.) | |
| Sound system equipment -- Part 16: Objective rating of speech intelligibility by speech transmission index | |
| Sound system equipment -- Part 3: Amplifiers. | |
| Sound system equipment -- Part 4: Microphones (Endorsed by AENOR in June of 2004.) | |
| Sound system equipment -- Part 4: Microphones. (Endorsed by AENOR in November of 2001.) | |
| Sound system equipment -- Part 5: Loudspeakers | |
| Sound system equipment -- Part 7: Headphones and earphones | |
| SOUND SYSTEM EQUIPMENT. PART 12: APPLICATION OF CONNECTORS FOR BROADCAST AND SIMILAR USE. | |
| SOUND SYSTEM EQUIPMENT. PART 5: LOUDSPEAKERS. | |
| SOUND SYSTEM EQUIPMENT. PART 5:LOUDSPEAKERS. | |
| SOUND SYSTEM EQUIPMENT. PART 7: HEADPHONES AND EARPHONES. | |
| SPECIFICATION FOR PARTICULAR TYPES OF WINDING WIRES. PART 45: POLYESTER ENAMELLED ROUND COPPER WIRE, CLASS 130. | |
| Specifications for particular type of winding wires - Part 59: Polyamideimide enameled round copper wire, class 240 | |
| Specifications for particular types of winding wires - Part 0-10: General requirements - Polyester glass-fibre wound fused, unvarnished, or resin or varnish impregnated, bare or enamelled round copper wire | |
| Specifications for particular types of winding wires - Part 0-1: General requirements - Enamelled round copper wire | |
| Specifications for particular types of winding wires - Part 0-2: General requirements - Enamelled rectangular copper wire | |
| Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminium wire | |
| Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminum wire | |
| Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire | |
| Specifications for particular types of winding wires - Part 0-5: General requirements - Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire | |
| Specifications for particular types of winding wires - Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire | |
| Specifications for particular types of winding wires - Part 0-7: General requirements - Fully insulated (FIW) zero-defect enamelled round copper wire with nominal conductor diameter of 0,040 mm to 1,600... | |
| Specifications for particular types of winding wires - Part 0-7: General requirements - Fully insulated (FIW) zero-defect enamelled round copper wire | |
| Specifications for particular types of winding wires - Part 0-8: General requirements - Polyester glass fibre wound, resin or varnish impregnated or not impregnated, bare or enamelled rectangular copper wire... | |
| Specifications for particular types of winding wires - Part 0-9: General requirements - Enamelled rectangular aluminium wire | |
| Specifications for particular types of winding wires - Part 12: Polyvinyl acetal enamelled round copper wire, class 120 | |
| Specifications for particular types of winding wires - Part 13: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200 | |
| Specifications for particular types of winding wires - Part 15: Polyesterimide enamelled round aluminium wire, class 180 | |
| Specifications for particular types of winding wires - Part 17: Polyvinyl acetal enamelled rectangular copper wire, class 105 | |
| Specifications for particular types of winding wires - Part 18: Polyvinyl acetal enamelled rectangular copper wire, class 120 | |
| Specifications for particular types of winding wires - Part 19: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 130 | |
| Specifications for particular types of winding wires - Part 20: Solderable polyurethane enamelled round copper wire, class 155 | |
| Specifications for particular types of winding wires - Part 21: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155 | |
| Specifications for particular types of winding wires - Part 23: Solderable polyesterimide enamelled round copper wire, class 180 | |
| Specifications for particular types of winding wires - Part 25: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200 | |
| Specifications for particular types of winding wires - Part 26: Polyamide-imide enamelled round copper wire, class 200 | |
| Specifications for particular types of winding wires - Part 27: Paper tape covered rectangular copper wire | |
| Specifications for particular types of winding wires - Part 28: Polyesterimide enamelled rectangular copper wire, class 180 | |
| Specifications for particular types of winding wires - Part 2: Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer | |
| Specifications for particular types of winding wires - Part 31: Glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180 | |
| Specifications for particular types of winding wires - Part 31: Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180 | |
| Specifications for particular types of winding wires - Part 32: Glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155 | |
| Specifications for particular types of winding wires - Part 32: Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155 | |
| Specifications for particular types of winding wires - Part 33: Glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200 | |
| Specifications for particular types of winding wires - Part 33: Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200 | |
| Specifications for particular types of winding wires - Part 35: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer | |
| Specifications for particular types of winding wires - Part 36: Solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer | |
| Specifications for particular types of winding wires - Part 37: Polyesterimide enamelled round copper wire, class 180, with a bonding layer | |
| Specifications for particular types of winding wires - Part 38: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200, with a bonding layer | |
| Specifications for particular types of winding wires - Part 38: Polyester or polyesterimide overcoated with polyamide-imide, enamelled round copper wire, class 200, with a bonding layer | |
| Specifications for particular types of winding wires - Part 39: Glass-fibre braided resin or varnish-impregnated, bare or enamelled rectangular copper wire, temperature index 180 | |
| Specifications for particular types of winding wires - Part 39: Glass-fibre braided, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180 | |
| Specifications for particular types of winding wires - Part 40: Glass-fibre braided resin or varnish-impregnated, bare or enamelled rectangular copper wire, temperature index 200 | |
| Specifications for particular types of winding wires - Part 40: Glass-fibre braided, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200 | |
| Specifications for particular types of winding wires - Part 42: Polyester-amide-imid e enamelled round copper wire, class 200 | |
| Specifications for particular types of winding wires - Part 46: Aromatic polyimide enamelled round copper wire, class 240 | |
| Specifications for particular types of winding wires - Part 47: Aromatic polyimide enamelled rectangular copper wire, class 240 | |
| Specifications for particular types of winding wires - Part 48: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155 | |
| Specifications for particular types of winding wires - Part 49: Glass-fibre wound high temperature resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180 | |
| Specifications for particular types of winding wires - Part 50: Glass-fibre wound silicone resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200 | |
| Specifications for particular types of winding wires - Part 51: Solderable polyurethane enamelled round copper wire, class 180 | |
| Specifications for particular types of winding wires - Part 52: Aromatic polyamide (aramid) tape wrapped round copper wire, temperature index 220 | |
| Specifications for particular types of winding wires - Part 53: Aromatic polyamide (aramid) tape wrapped rectangular copper wire, temperature index 220 | |
| Specifications for particular types of winding wires - Part 55: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 180 | |
| Specifications for particular types of winding wires - Part 56: Solderable fully insulated (FIW) zero-defect polyurethane enamelled round copper wire with nominal conductor diameter of 0,040 mm to 1,600 mm,... | |
| Specifications for particular types of winding wires - Part 56: Solderable fully insulated (FIW) zero-defect polyurethane enamelled round copper wire, class 180 | |
| Specifications for particular types of winding wires - Part 57: Polyamide-imide enamelled round copper wire, class 220 | |
| Specifications for particular types of winding wires - Part 58: Polyamide-imide enamelled rectangular copper wire, class 220 | |
| Specifications for particular types of winding wires - Part 59: Polyamide-imide enamelled round copper wire, class 240 | |
| Specifications for particular types of winding wires - Part 60: Polyester glass fibre wound minimum class 155 resin or varnish impregnated or not impregnated, bare or enamelled, rectangular copper wire,... | |
| Specifications for particular types of winding wires - Part 61: Polyester glass fibre wound, minimum class 180, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180... | |
| Specifications for particular types of winding wires - Part 62: Polyester glass fibre wound, minimum class 200 resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200... | |
| Specifications for particular types of winding wires - Part 67: Polyvinyl acetal enamelled rectangular aluminium wire, class 105 | |
| Specifications for particular types of winding wires - Part 68: Polyvinyl acetal enamelled rectangular aluminium wire, class 120 | |
| Specifications for particular types of winding wires - Part 69: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular aluminium wire, class 220 | |
| Specifications for particular types of winding wires - Part 70: Polyester glass-fibre wound fused, unvarnished or resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155 | |
| Specifications for particular types of winding wires - Part 71: Polyester glass-fibre wound fused and resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180 | |
| Specifications for particular types of winding wires - Part 72: Polyester glass-fibre wound fused, silicone resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200 | |
| Specifications for particular types of winding wires - Part 8: Polyesterimide enamelled round copper wire, class 180 | |
| Specifications for particular types of winding wires -- Part 0-1: General requirements - Enamelled round copper wire (IEC 60317-0-1:1997/A2:20 05) | |
| Specifications for particular types of winding wires -- Part 0-1: General requirements - Enamelled round copper wire | |
| Specifications for particular types of winding wires -- Part 0-2: General requirements - Enamelled rectangular copper wire | |
| Specifications for particular types of winding wires -- Part 0-3: General requirements - Enamelled round aluminium wire. | |
| Specifications for particular types of winding wires -- Part 0-3: General requirements - Enamelled round aluminum wire | |
| Specifications for particular types of winding wires -- Part 0-5: General requirements - Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire. | |
| Specifications for particular types of winding wires -- Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire. | |
| Specifications for particular types of winding wires -- Part 11: Bunched solderable polyurethane enamelled round copper wire, class 130, with silk covering. | |
| Specifications for particular types of winding wires -- Part 12: Polyvinyl acetal enamelled round copper wire, class 120 (IEC 60317-12:1990/A2:200 5). | |
| Specifications for particular types of winding wires -- Part 13: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200 | |
| Specifications for particular types of winding wires -- Part 15: Polyesterimide enamelled round aluminium wire, class 180 | |
| Specifications for particular types of winding wires -- Part 17: Polyvinyl acetal enamelled rectangular copper wire, class 105 | |
| Specifications for particular types of winding wires -- Part 22 : Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180 | |
| Specifications for particular types of winding wires -- Part 22: Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180 | |
| Specifications for particular types of winding wires -- Part 29: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200 | |
| Specifications for particular types of winding wires -- Part 2: Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer. | |
| Specifications for particular types of winding wires -- Part 30: Polyimide enamelled rectangular copper wire, class 220 (IEC 60317-30:1990/A2:200 5) | |
| Specifications for particular types of winding wires -- Part 43: Aromatic polyimide tape wrapped round copper wire, class 240 | |
| Specifications for particular types of winding wires -- Part 44: Aromatic polyimide tape wrapped rectangular copper wire, class 240 | |
| Specifications for particular types of winding wires -- Part 48: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155. | |
| Specifications for particular types of winding wires -- Part 49: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180. | |
| Specifications for particular types of winding wires -- Part 4: Solderable polyurethane enamelled round copper wire, class 130. | |
| Specifications for particular types of winding wires -- Part 50: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200. | |
| SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES -- PART 52: AROMATIC POLYAMIDE (ARAMID) TAPE WRAPPED ROUND COPPER WIRE, TEMPERATURE INDEX 220. | |
| Specifications for particular types of winding wires -- Part 53: Aromatic polyamide (aramid) tape wrapped rectangular copper wire, temperature index 220. | |
| Specifications for particular types of winding wires -- Part 57: Polyamide-imide enamelled round copper wire, class 220 | |
| Specifications for particular types of winding wires -- Part 58: Polyamide-imide enamelled rectangular copper wire, class 220 | |
| Specifications for particular types of winding wires -- Part 8: Polyesterimide enamelled round copper wire, class 180 | |
| SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 0: GENERAL REQUIREMENTS. SECTION 1: ENAMELLED ROUND COPPER WIRE. | |
| SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 0: GENERAL REQUIREMENTS. SECTION 2: ENAMELLED RECTANGULAR COPPER WIRE. | |
| SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 0: GENERAL REQUIREMENTS. SECTION 3: ENAMELLED ROUND ALUMINIUM WIRE. | |
| SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 0: GENERAL REQUIREMENTS. SECTION 4: GLASS-FIBRE WOUND BARE OR ENAMELLED RECTANGULAR COPPER WIRE. | |
| SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 0: GENERAL REQUIREMENTS. SECTION 5: GLASS-FIBRE BRAIDED RESIN OR VARNISH IMPREGNATED, BARE OR ENAMELLED RECTANGULAR COPPER WIRE. | |
| SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 0: GENERAL REQUIREMENTS. SECTION 5: GLASS-FIBRE BRAIDED, BARE OR ENAMELLED RECTANGULAR COPPER WIRE. | |
| SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 11: BUNCHED SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRES, CLASS 130, WITH SILK COVERING. | |
| SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 11: BUNCHEDSOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE, CLASS 130, WITH SILK COVERING. | |
| SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 11: BUNCHEDSOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRES, CLASS 13O, WITH SILK COVERING. | |
| SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 12: POLYVINYL ACETAL ENAMELLED ROUND COPPER WIRE, CLASS 120. | |
| SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 13: POLYESTER OR POLYESTERIMIDE OVERCOATED WITH POLYAMIDE-IMIDE ENAMELLED ROUND COPPER WIRE, CLASS 200. | |
| SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 14: POLYVINYL ACETAL ENAMELLED ROUND ALUMINIUM WIRE, CLASS 105. | |
| SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 15: POLYESTERIMIDE ENAMELLED ROUND ALUMINIUM WIRE, CLASS 180. | |
| SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 16. POLYESTER ENAMELLED RECTANGULAR COPPER WIRE, CLASS 155. | |
| SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 16: POLYESTER ENAMELLED RECTANGULAR COPPER WIRE, CLASS 155. | |
| SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 17: POLYVINYL ACETAL ENAMELLED RECTANGULAR COPPER WIRE, CLASS 105. | |
| SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 17: POLYVINYL ACETAL ENAMELLLED RECTANGULAR COPPER WIRE, CLASS 105. | |
| SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 18: POLYVINYL ACETAL ENAMELLED RECTANGULAR COPPER WIRE, CLASS 120. | |
| SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 1: POLYVINYL ACETAL ENAMELLED ROUND COPPER WIRE, CLASS 105. | |
| SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 22: POLYESTER OR POLYESTERIMIDE ENAMELLED ROUND COPPER WIRE OVERCOATED WITH POLYAMIDE, CLASS 180. | |
| SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 24: POLYESTER OR POLYESTERIMIDE ENAMELLED ROUND ALUMINIUM WIRE OVERCOATED WITH POLYAMIDE, CLASS 180. | |
| SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 25: POLYESTER OR POLYESTERIMIDE OVERCOATED WITH POLYAMIDE-IMIDE ENAMELLED ROUND ALUMINIUM WIRE, CLASS 200. | |
| SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 27: PAPER COVERED RECTANGULAR COPPER WIRE. | |
| SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 29: POLYESTER OR POLYESTERIMIDE OVERCOATED WITH POLYAMIDE-IMIDE ENAMELLED RECTANGULAR COPPER WIRE, CLASS 200. | |
| SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 29: POLYESTERIMIDE OVERCOATED WITH POLYAMIDE-IMIDE ENAMELLED RECTANGULAR COPPER WIRE, CLASS 200. | |
| SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 2: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE, CLASS 130, WITH A BONDING LAYER. | |
| SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 2: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER, WIRE, CLASS 130, WITH A BONDING LAYER. | |
| SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 30: POLYIMIDE ENAMELLED RECTANGULAR COPPER WIRE, CLASS 220. | |
| SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 34: POLYESTER ENAMELLED ROUND COPPER WIRE, CLASS 130 L. | |
| SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 34: POLYESTER ENAMELLED ROUND COPPER WIRE, CLASS 130. | |
| SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 3: POLYESTER ENAMELLED ROUND COPPER WIRE, CLASS 155. | |
| SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 43: AROMATIC POLYIMIDE TAPE WRAPPED ROUND COPPER WIRE, CLASS 240. | |
| SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 44: AROMATIC POLYIMIDE TAPE WRAPPED RECTANGULAR COPPER WIRE, CLASS 240. | |
| SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 4: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE, CLASS 130. | |
| SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 7: POLYIMIDE ENAMELLED ROUND COPPER WIRE, CLASS 220. | |
| SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 8: POLYESTERIMIDE ENAMELLED ROUND COPPER WIRE, CLASS 180. | |
| SPECIFICTIONS FOR PARTICUALR TYPES OF WINDING WIRES. PART 3: POLYESTER ENAMELLED ROUND COPPER WIRE, CLASS 155. | |
| Vacuum cleaners for household use - Methods of measuring the performance. | |
| Vacuum cleaners for household use - Methods of measuring the performance | |
| Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance | |
| VACUUM CLEANERS FOR HOUSEHOLD USE. METHODS OF MEASURING THE PERFORMANCE. |
| << Prev | Next >> |