AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
70
80
90
100
110
120
127
128
129
130
131
132
133
134
135
136
137
138
139
140
150
160
170
180
181
| Product Name | Notes |
|---|---|
| ºººººRONIC RIPPLE CONTROL RECEIVERS FOR TARIFF AND LOAD CONTROL. | |
| 0AFETAY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE. PART 2-010: PARTICULAR REQUIREMENTS FOR LABORATORY CENTRIFUGES. | |
| ACCEPTANCE TESTS FOR STEAM TURBINE SPEED CONTROL SYSTEMS (Endorsed by AENOR in November of 1995.) | |
| Acoustics - Measurement of airborne noise emitted by steam turbines and driven machinery | |
| AERIAL DEVICES WITH INSULATING BOOM USED FOR LIVE WORKING EXCEEDING 1 KV A.C. | |
| Aerospace series - Rivet, 100° medium flush head, close tolerance - Inch series (Endorsed by AENOR in October of 2016.) | |
| Aerospace series - Rivet, 100° medium flush head, close tolerance - Inch series (Endorsed by Asociación Española de Normalización in February of 2023.) | |
| Aerospace series - Rod-end with bearing per EN 6097 in corrosion resisting steel, extra wide inner ring, external threaded shank - Dimensions and loads - Inch series (Endorsed by Asociación... | |
| Aerospace series - Rod-end, spherical, plain bearing, metal to metal - Technical specification (Endorsed by Asociación Española de Normalización in May of 2021.) | |
| Aerospace series - Stud with shoulder (Endorsed by AENOR in October of 2016.) | |
| Alternating current static watt-hour meters for active energy (classes 1 and 2). | |
| Arc welding equipment - Part 12: Coupling devices for welding cables | |
| Arc welding equipment - Part 13: Welding clamp | |
| Arc welding equipment - Part 1: Welding power sources | |
| Arc welding equipment - Part 2: Liquid cooling systems (Endorsed by AENOR in July of 2013.) | |
| Arc welding equipment - Part 2: Liquid cooling systems | |
| Arc welding equipment - Part 3: Arc striking and stabilizing devices | |
| Arc welding equipment - Part 4: Periodic inspection and testing (Endorsed by Asociación Española de Normalización in January of 2017.) | |
| Arc welding equipment - Part 4: Periodic inspection and testing | |
| Arc welding equipment - Part 5: Wire feeders (Endorsed by AENOR in September of 2013.) | |
| Arc welding equipment - Part 5: Wire feeders | |
| Arc welding equipment - Part 6: Limited duty equipment (Endorsed by AENOR in March of 2016.) | |
| Arc welding equipment - Part 6: Limited duty equipment | |
| Arc welding equipment - Part 7:Torches (Endorsed by AENOR in June of 2013.) | |
| Arc welding equipment - Part 7:Torches | |
| Arc welding equipment - Part 9: Installation and use | |
| Arc welding equipment -- Part 12: Coupling devices for welding cables. | |
| Arc welding equipment -- Part 1: Welding power sources. | |
| Arc welding equipment -- Part 1: Welding power sources | |
| Arc welding equipment -- Part 2: Liquid cooling systems | |
| Arc welding equipment -- Part 3: Arc striking and stabilizing devices | |
| Arc welding equipment -- Part 4: In-service inspection and testing (IEC 60974-4:2006). | |
| Arc welding equipment -- Part 5: Wire feeders. | |
| Arc welding equipment -- Part 6: Limited duty manual metal arc welding power sources | |
| Arc welding equipment -- Part 7: Torches. | |
| Arc welding equipment -- Part 8: Gas consoles for welding and plasma cutting systems | |
| ARC WELDING EQUIPMENT. PART 12: COUPLING DEVICES FOR WELDING CABLES. | |
| Audio, video and audiovisual systems - Domestic Digital Bus (D2B) | |
| Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements (IEC 61048:2006). | |
| Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements | |
| AUXILIARIES FOR LAMPS. CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS. GENERAL AND SAFETY REQUIREMENTS. | |
| Auxiliaries for lamps. Capacitors for use in tubular fluorescent and other discharge lamp circuits. General and safety requirements | |
| AUXILIARIES FOR LAMPS. D.C: OR A.C. SUPPLIED ELECTRONIC STEP-DOWN CONVERTORS FOR FILAMENT LAMPS. GENERAL AND SAFETY REQUIREMENTS. | |
| CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS. GENERAL AND SAFETY REQUIREMENTS. | |
| CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS. PERFORMANCE REQUIREMENTS. | |
| Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units -- Part 1: General requirements and particular requirements for clamping units for conductors from 0,2... | |
| Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units -- Part 2: Particular requirements for clamping units for conductors above 35 mm² up to... | |
| Connecting devices for low voltage circuits for household and similar purposes -- Part 1: General requirements. | |
| Connecting devices for low voltage circuits for household and similar purposes -- Part 2-4: Particular requirements for twist-on connecting devices | |
| CONNECTING DEVICES FOR LOW VOLTAGE CIRCUITS FOR HOUSEHOLD AND SIMILAR PURPOSES. PART 1: GENERAL REQUIREMENTS. | |
| CONNECTING DEVICES FOR LOW VOLTAGE CIRCUITS FOR HOUSEHOLD AND SIMILAR PURPOSES. PART 2-2: PARTICULAR REQUIREMENTS FOR CONNECTING DEVICES AS SEPARATE ENTITIES WITH SCREWLESS-TYPE CLAMPING UNITS. | |
| Connecting devices for low-voltage circuits for household and similar purposes -- Part 1: General requirements | |
| Connecting devices for low-voltage circuits for household and similar purposes -- Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units | |
| Connecting devices for low-voltage circuits for household and similar purposes -- Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units | |
| Connecting devices for low-voltage circuits for household and similar purposes -- Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units | |
| CONNECTING DEVICES FOR LOW-VOLTAGE CIRCUITS FOR HOUSEHOLD AND SIMILAR PURPOSES. PART 2-1: PARTICULAR REQUIREMENTS FOR CONNECTING DEVICES AS SEPARATE ENTITIES WITH SCREW-TYPE CLAMPING UNITS. | |
| CONNECTING DEVICES FOR LOW-VOLTAGE CIRCUITS FOR HOUSEHOLD AND SIMILAR PURPOSES. PART 2-3: PARTICULAR REQUIREMENTS FOR CONNECTING DEVICES AS SEPARATE ENTITIES WITH INSULATION PIERCING CLAMPING UNITS. | |
| CONNECTING DEVICES FOR LOW-VOLTAGE CIRCUITS FOR HOUSEHOLD AND SIMILAR PURPOSES. PART 2-4: PARTICULAR REQUIREMENTS FOR TWIST-ON CONNECTING DEVICES. | |
| CONNECTING DEVICES. SAFETY REQUIREMENTS FOR SCREW-TYPE AND SCREWLESS-TYPE CLAMPING UNITS FOR ELECTRICAL COPPER CONDUCTORS. PART 1: GENERAL REQUIREMENTS AND PARTICULAR REQUIREMENTS FOR CONDUCTORS FROM 0,5 MM2 UP TO 35 MM2... | |
| CONNECTING DEVICES. SAFETY REQUIREMENTS FOR SCREW-TYPE AND SCREWLESS-TYPE CLAMPING UNITS FOR ELECTRICAL COPPER CONDUCTORS. | |
| D.C. or a.c. supplied electronic step-down convertors for filament lamps - Performance requirements | |
| D.C. OR A.C. SUPPLIED ELECTRONIC STEP-DOWN CONVERTORS FOR FILAMENT LAMPS. GENERAL AND SAFETY REQUIREMENTS. | |
| D.C. OR A.C. SUPPLIED ELECTRONIC STEP-DOWN CONVERTORS FOR FILAMENT LAMPS. PERFORMANCE REQUIREMENTS. | |
| DC or AC supplied electronic step-down convertors for filament lamps - Performance requirements | |
| DETERMINATION OF THE PROTOTYPE PERFORMANCE FROM MODEL ACCEPTANCE TESTS OF HYDRAULIC MACHINES WITH CONSIDERATION OF SCALE EFFECTS. (Endorsed by AENOR in November of 1995.) | |
| ELECTRIC FENCE ENERGIZERS. SAFETY REQUIREMENTS FOR BATTERY-OPERATED ELECTRIC FENCE ENERGIZERS SUITABLE FOR CONNECTION TO THE SUPPLY MAINS. (Endorsed by AENOR in November of 1995.) | |
| ELECTRIC FENCE ENERGIZERS. SAFETY REQUIREMENTS FOR MAINS-OPERATED ELECTRIC FENCE ENERGIZERS. (Endorsed by AENOR in November of 1995.) | |
| ELECTRIC FENCE ENERGIZERS. SAFETY REQUIREMENTS FOR MAINS-OPERATED ELECTRIC FENCE ENERGIZERS. (Endorsed by AENOR in September of 1996.) | |
| ELECTRIC FENZE ENERGIZERS. PART 2: SAFETY REQUIREMENTS FOR BATTERY-OPERATED ELECTRIC FENCE ENERGIZERS NOT FOR CONNECTION TO THE SUPPLY MAINS. (Endorsed by AENOR in November of 1995.) | |
| ELECTRICAL ACCESORIES. RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBO S). PART 1: GENERAL RULES. | |
| ELECTRICAL ACCESORIES. RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBO'S). PART 1: GENERAL RULES. | |
| ELECTRICAL ACCESORIES. RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCB'S). PART 1: GENERAL RULES. | |
| Electrical accessories - Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) -- Part 1: General rules. | |
| Electrical accessories - Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) -- Part 1: General rules. | |
| ELECTRICAL ACCESSORIES. RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBO'S). PART 1: GENERAL RULES. | |
| ELECTRICAL ACCESSORIES. RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBO'S). PART 1: GENERAL RULES | |
| ELECTRICAL ACCESSORIES. RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCB'S). PART 1: GENERAL RULES. | |
| ELECTRICAL ACCESSORIES. RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCB'S). PART 1: GENERAL RULES. | |
| ELECTRICAL ACCESSORIES: RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBO S). PART 1: GENERAL RULES. | |
| Electrical insulating materials - Methods of test for the determination of the glass transition temperature (Endorsed by AENOR in August of 2004.) | |
| ELECTRICAL MEASURING INSTRUMENTS. X-Y RECORDERS. | |
| ELECTRICITY METERING - TARIFF AND LOAD CONTROL - PARTICULAR REQUIREMENTS FOR ELECTRONIC RIPPLE CONTROL RECEIVERS | |
| ELECTRICITY METERING - TARIFF AND LOAD CONTROLS - PARTICULAR REQUIREMENTS FOR TIME SWITCHES | |
| ELECTROACUSTICS. INSTRUMENTS FOR THE MEASUREMENT OF SOUND INTENSITY. MEASUREMENT WITH PAIRS OF PRESSURE SENSING MICROPHONES. | |
| Electrolyte for vented nickel-cadmium cells | |
| ELECTROMAGNETIC COMPABILITY (EMC). PART 3: LIMITS. SECTION 2: LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT UP TO AND INCLUDING 16 A PER PHASE). | |
| ELECTROMAGNETIC COMPABILITY (EMC). PART 4-2: TESTING AND MEASUREMENT TECHNIQUES. ELECTROSTATIC DISCHARGE IMMUNITY TEST. | |
| ELECTROMAGNETIC COMPABITILITY (EMC). PART 4: TESTING AND MEASUREMENT TECHNIQUES. SECTION 11: VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS, IMMUNITY TESTS. | |
| ELECTROMAGNETIC COMPATIBILITY (CEM). PART 4: TESTING AND MEASUREMENT TECHNIQUES. SECTION 2: ELECTROSTATIC DISCHARGE IMMUNITY TEST. BASIC EMC PUBLICATION. | |
| Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena (Endorsed by AENOR... | |
| Electromagnetic compatibility (EMC) - Part 2-10: Environment - Description of HEMP environment - Conducted disturbance | |
| Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems | |
| Electromagnetic compatibility (EMC) - Part 2: Environment - Section 9: Description of HEMP environment - Radiated disturbance | |
| Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current <= 75 A and... | |
| Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and <= 75 A... | |
| Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and = 75 A per... | |
| Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase) | |
| Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current = 16 A per phase) | |
| Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per... | |
| Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current =16 A per phase... | |
| Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test | |
| Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests | |
| Electromagnetic compatibility (EMC) - Part 4-12: Testing and measurement techniques - Ring wave immunity test | |
| Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests | |
| Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phaseCompatibilité électromagnétique (CEM) - Partie... | |
| Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications | |
| Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz | |
| Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test | |
| Electromagnetic compatibility (EMC) - Part 4-19: Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz... | |
| Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series | |
| Electromagnetic compatibility (EMC) - Part 4-22: Testing and measurement techniques - Radiated emission and immunity measurements in fully anechoic rooms (FARs) | |
| Electromagnetic compatibility (EMC) - Part 4-23: Testing and measurement techniques - Test methods for protective devices for HEMP and other radiated disturbances | |
| Electromagnetic compatibility (EMC) - Part 4-25: Testing and measurement techniques - HEMP immunity test methods for equipment and systems | |
| Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods | |
| Electromagnetic Compatibility (EMC) - Part 4-31: Testing and measurement techniques - AC mains ports broadband conducted disturbance immunity test (Endorsed by Asociación Española de Normalización in April of 2017.) | |
| Electromagnetic Compatibility (EMC) - Part 4-39: Testing and measurement techniques - Radiated fields in close proximity - Immunity test | |
| Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test | |
| Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test | |
| Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test | |
| Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields | |
| Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Impulse magnetic field immunity test | |
| Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Pulse magnetic field immunity test | |
| Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 24: Test methods for protective devices for HEMP conducted disturbance | |
| Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments | |
| Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments | |
| Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments | |
| Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments | |
| Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for equipment used in power station and substation environment | |
| Electromagnetic compatibility (EMC) - Part 6-7: Generic standards - Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations | |
| Electromagnetic compatibility (EMC) -- Part 2-12 : Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems | |
| Electromagnetic compatibility (EMC) -- Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems | |
| Electromagnetic compatibility (EMC) -- Part 2-4: Environment - Compatibility levels in industrial plants for low-frequency conducted disturbances | |
| Electromagnetic compatibility (EMC) -- Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and <= 75 A... | |
| Electromagnetic compatibility (EMC) -- Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase) | |
| Electromagnetic compatibility (EMC) -- Part 3-2: Limits - Limits for harmonic current emissions (equipment input current up to and including 16 A per phase) (Endorsed by AENOR in December of... | |
| Electromagnetic compatibility (EMC) -- Part 3-2: Limits - Limits for harmonic current emissions (equipment input current up to and including 16 A per phase). | |
| Electromagnetic compatibility (EMC) -- Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per... | |
| Electromagnetic compatibility (EMC) -- Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests. | |
| Electromagnetic compatibility (EMC) -- Part 4-12: Testing and measurement techniques - Oscillatory waves immunity test. | |
| Electromagnetic compatibility (EMC) -- Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests | |
| Electromagnetic compatibility (EMC) -- Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16A per phase. | |
| Electromagnetic compatibility (EMC) -- Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications | |
| Electromagnetic compatibility (EMC) -- Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test. | |
| Electromagnetic compatibility (EMC) -- Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test | |
| Electromagnetic compatibility (EMC) -- Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series. (IEC 61000-4-1:2000) | |
| Electromagnetic compatibility (EMC) -- Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides (IEC 61000-4-20:2003/A1:2 006). | |
| Electromagnetic compatibility (EMC) -- Part 4-20: Testing and measurement techniques - Emission and immunity testing in Transverse Electromagnetic (TEM) waveguides - Basic EMC publication | |
| Electromagnetic compatibility (EMC) -- Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides | |
| Electromagnetic compatibility (EMC) -- Part 4-21: Testing and measurement techniques - Reverberation chamber test methods | |
| Electromagnetic compatibility (EMC) -- Part 4-25: Testing and measurement techniques - HEMP immunity test methods for equipment and systems. | |
| Electromagnetic compatibility (EMC) -- Part 4-27: Testing and measurement techniques - Unbalance, immunity test for equipment with input current no exceeding 16 A per phase. | |
| Electromagnetic compatibility (EMC) -- Part 4-27: Testing and measurement techniques - Unbalance, immunity test for equipment with input current not exceeding 16 A per phase | |
| Electromagnetic compatibility (EMC) -- Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase | |
| Electromagnetic compatibility (EMC) -- Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests. | |
| Electromagnetic compatibility (EMC) -- Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test. | |
| Electromagnetic compatibility (EMC) -- Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test | |
| Electromagnetic compatibility (EMC) -- Part 4-30: Testing and measurement techniques - Power quality measurement methods | |
| Electromagnetic compatibility (EMC) -- Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per... | |
| Electromagnetic compatibility (EMC) -- Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test. | |
| Electromagnetic compatibility (EMC) -- Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test | |
| Electromagnetic compatibility (EMC) -- Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test. | |
| Electromagnetic compatibility (EMC) -- Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test | |
| Electromagnetic compatibility (EMC) -- Part 4-5: Testing and measurement techniques - Surge immunity test. | |
| Electromagnetic compatibility (EMC) -- Part 4-5: Testing and measurement techniques - Surge immunity test | |
| Electromagnetic compatibility (EMC) -- Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields. | |
| Electromagnetic compatibility (EMC) -- Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields | |
| Electromagnetic compatibility (EMC) -- Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto | |
| Electromagnetic compatibility (EMC) -- Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test. | |
| Electromagnetic compatibility (EMC) -- Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test | |
| Electromagnetic compatibility (EMC) -- Part 4-9: Testing and measurement techniques - Pulse magnetic field immunity test. Basic EMC Publication. | |
| Electromagnetic compatibility (EMC) -- Part 4: Testing and measurement techniques - Section 2: Electrostatic discharge immunity test. Basic EMC Publication. | |
| Electromagnetic compatibility (EMC) -- Part 5-7: Installation and mitigation guidelines - Degrees of protection by enclosures against electromagnetic disturbances (EM code). | |
| Electromagnetic compatibility (EMC) -- Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments. | |
| Electromagnetic compatibility (EMC) -- Part 6-2: Generic standards - Immunity for industrial environments. | |
| Electromagnetic compatibility (EMC) -- Part 6-2: Generic standards - Immunity for industrial environments | |
| Electromagnetic compatibility (EMC) -- Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments. | |
| Electromagnetic compatibility (EMC) -- Part 6-3: Generic standards - Emission stantdard for residential, commercial and light-industrial environments | |
| Electromagnetic compatibility (EMC) -- Part 6-4: Generic standards - Emission standard for industrial environments. | |
| Electromagnetic compatibility (EMC) -- Part 6-4: Generic standards - Emission standard for industrial environments | |
| ELECTROMAGNETIC COMPATIBILITY (EMC). PART 2: ENVIRONMENT. SECTION 4: COMPATIBILITY LEVELS IN INDUSTRIAL PLANTS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES. | |
| ELECTROMAGNETIC COMPATIBILITY (EMC). PART 3-2: LIMITS. LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <16 A PER PHASE). | |
| ELECTROMAGNETIC COMPATIBILITY (EMC). PART 3-2: LIMITS. LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE). HASE). | |
| Electromagnetic compatibility (EMC). Part 3-3: Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and... | |
| ELECTROMAGNETIC COMPATIBILITY (EMC). PART 3: LIMITS. SECTION 2: LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE). | |
| ELECTROMAGNETIC COMPATIBILITY (EMC). PART 3: LIMITS. SECTION 2: LIMITSFOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT UP OT AND INCLUDING 16 A PER PHASE). | |
| ELECTROMAGNETIC COMPATIBILITY (EMC). PART 3: LIMITS. SECTION 3: LIMITATION OF VOLTAGE FLUCTUATIONS AND FLICKER IN LOW-VOLTAGE SUPPLY SYSTEMS FOR EQUIPMENT WITH RATED CURRENT <= 16 A. | |
| ELECTROMAGNETIC COMPATIBILITY (EMC). PART 4-3: TESTING AND MEASUREMENT TECHNIQUES. RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST. | |
| Electromagnetic compatibility (EMC). Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test. | |
| ELECTROMAGNETIC COMPATIBILITY (EMC). PART 4: TESTING AND MEASUREMENT TECHNIQUES. SECTION 12: OSCILLATORY WAVES IMMUNITY TEST. BASIC EMC PUBLICATION. | |
| ELECTROMAGNETIC COMPATIBILITY (EMC). PART 4: TESTING AND MEASUREMENT TECHNIQUES. SECTION 15: FLICKERMETER. FUNCTIONAL AND DESIGN SPECIFICATIONS. | |
| ELECTROMAGNETIC COMPATIBILITY (EMC). PART 4: TESTING AND MEASUREMENT TECHNIQUES. SECTION 1: OVERVIEW OF INMUNITY TESTS BASIC EMC PUBLICATION. | |
| ELECTROMAGNETIC COMPATIBILITY (EMC). PART 4: TESTING AND MEASUREMENT TECHNIQUES. SECTION 3: RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST. | |
| ELECTROMAGNETIC COMPATIBILITY (EMC). PART 4: TESTING AND MEASUREMENT TECHNIQUES. SECTION 4: ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST. BASIC EMC PUBLICATION. | |
| ELECTROMAGNETIC COMPATIBILITY (EMC). PART 4: TESTING AND MEASUREMENT TECHNIQUES. SECTION 6: IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS. | |
| ELECTROMAGNETIC COMPATIBILITY (EMC). PART 4: TESTING AND MEASUREMENT TECHNIQUES. SECTION 7: GENERAL GUIDE ON HARMONICS AND INTERHARMONICS MEASUREMENTS AND INSTRUMENTATION, FOR POWER SUPPLY SYSTEMS AND EQUIPMENT CONNECTED THERE TO. | |
| ELECTROMAGNETIC COMPATIBILITY (EMC). PART 4: TESTING AND MEASUREMENT TECHNIQUES. SECTION 8: POWER FREQUENCY MAGNETIC FIELD IMMUNITY TEST. BASIC EMC PUBLICATION. | |
| ELECTROMAGNETIC COMPATIBILITY (EMC). PART 5: INSTALLATION AND MITIGATION GUIDELINES. SECTION 5: SPECIFICATION OF PROTECTIVE DEVICES FOR HEMP CONDUCTED DISTURBANCE. BASIC EMC PUBLICATION. | |
| ELECTROMAGNETIC COMPATIBILITY. (EMC). PART 4: TESTING AND MEASUREMENT TECNIQUES. SECTION 5: SURGE IMMUNITY TEST. | |
| Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification | |
| ELECTRONIC RIPPLE CONTROL RECEIVERS FOR TARIFF AND LOAD CONTROL. | |
| Fault tree analysis (FTA (Endorsed by AENOR in March of 2009.) | |
| Fault tree analysis (FTA) | |
| Filters for the measurement of audible sound in the presence of ultrasound. | |
| General classification of insulating liquids | |
| General purpose lead-acid batteries (valve regulated types) -- Part 1: General requirements, functional characteristics - Methods of test | |
| General purpose lead-acid batteries (valve-regulated types) - Part 1: General requirements, functional characteristics - Methods of test | |
| General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking | |
| General purpose lead-acid batteries (valve-regulated types) -- Part 2: Dimensions, terminals and marking | |
| GLASS AND GLASS POLYESTER FIBRE WOVEN TAPES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 1: TYPE 1, 2 AND 3 TAPES. | |
| GUIDE FOR FIELD MEASUREMENT OF VIBRATIONS AND PULSATIONS IN HYDRAULIC MACHINES (TURBINES, STORAGE PUMPS AND PUMP-TURBINES). | |
| Helical-scan digital component video cassette recording system using 19 mm magnetic tape (format D-1) (Endorsed by AENOR in December of 2001.) | |
| HELICAL-SCAN VIDEO TAPE CASSETTE SYSTEM USING 12,65 MM (0,5 IN) MAGNETIC TAPE ON TYPE VHS FM AUDIO RECORDING. (Endorsed by AENOR in December of 1995.) | |
| Industrial process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 4: Assessment of system performance | |
| Industrial-process control systems - Instruments with analogue inputs and two- or multi-position outputs - Part 1: Methods for evaluating performance (Endorsed by AENOR in December of 2016.) | |
| Industrial-Process control systems - Instruments with analogue inputs and two- or multi-position outputs - Part 2: Guidance for inspection and routine testing (Endorsed by AENOR in December of 2016.) | |
| Industrial-process control systems - Instruments with analogue inputs and two- or multi-state outputs - Part 1: Methods of evaluating performance | |
| Industrial-process control systems - Instruments with analogue inputs and two- or multi-state outputs - Part 2: Guidance for inspection and routine testing | |
| INDUSTRIAL-PROCESS CONTROL SYSTEMS. INSTRUMENTS WITH ANALOGUE INPUTS AND TWO-OR MULTI-STATE OUTPUTS.PART 1: METHODS OF EVALUATING THE PERFORMANCE. (Endorsed by AENOR in April of 1996.) | |
| Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 1: General considerations and methodology | |
| Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 2: Assessment methodology | |
| Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 3: Assessment of system functionality | |
| Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 5: Assessment of system dependability | |
| Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 6: Assessment of system operability | |
| Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 1: Terminology and basic concepts (Endorsed by AENOR in December of 2016.)... | |
| Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 2: Assessment methodology (Endorsed by AENOR in December of 2016.) | |
| Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 3: Assessment of system functionality (Endorsed by AENOR in December of 2016.)... | |
| Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 4: Assessment of system performance (Endorsed by Asociación Española de Normalización in... | |
| Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 5: Assessment of system dependability (Endorsed by AENOR in November of 2016.)... | |
| INSTRUMENTS FOR THE MEASUREMENT OF AURAL ACOUSTIC IMPEDANCE/ADMITTANCE . | |
| Laminated core packages for transformers and inductors for use in telecommunication and electronic equipment - Part 2: Electrical characteristics for cores using YEE 2 laminations | |
| Laminated core packages for transformers and inductors used in telecommunication and electronic equipment - Part 1: Dimensions | |
| Live working - Insulating aerial devices for mounting on a chassis | |
| MARINE SPEED AND DISTANCE MEASURING EQUIPMENT (SDME). OPERATIONAL AND PERFORMANCE REQUIREMENTS. METHODS OF TESTING AND REQUIRED TEST RESULTS. (Endorsed by AENOR in May of 1995.) | |
| Maritime navigation and radiocommunication equipment and systems - Marine speed and distance measuring equipment (SDME) - Performance requirements, methods of testing and required test results (IEC 61023:2007). (Endorsed by AENOR... | |
| Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus | |
| Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements | |
| Measurement of smoke density of cables burning under defined conditions -- Part 1: Test apparatus | |
| Measurement of smoke density of cables burning under defined conditions -- Part 2: Test procedure and requirements | |
| Medical electrical equipment - Medical electron accelerators - Functional performance characteristics. | |
| Medical electrical equipment - Medical electron accelerators - Functional performance characteristics | |
| METHOD FOR EVALUATING THE LOW TEMPERATURE FLOW PROPERTIES OF MINERAL INSULATING OILS AFTER AGEING. | |
| Methods of measurement of touch current and protective conductor current (Endorsed by AENOR in October of 2016.) | |
| Methods of measurement of touch current and protective conductor current. (Endorsed by AENOR in November of 2001.) | |
| METHODS OF TEST FOR THE DETERMINATION OF THE GLASS TRANSITION TEMPERATURE OF ELECTRICAL INSULATING MATERIALS. (Endorsed by AENOR in November of 1995.) | |
| MINIATURE LAMPS. | |
| Miniature lamps | |
| NON-BROADCAST VIDEO TAPE RECORDERS. METHODS OF MEASUREMENT. PART 1: GENERAL VIDEO (NTSC/PAL) AND AUDIO (LONGITUDINAL) CHARACTERISTICS. (Endorsed by AENOR in December of 1995.) | |
| NON-BROADCAST VIDEO TAPE RECORDERS. METHODS OF MEASUREMENT. PART 2: VIDEO CHARACTERISTICS CHROMINANCE SECAM (Endorsed by AENOR in November of 1997.) | |
| NON-BROADCAST VIDEO TAPE RECORDERS. METHODS OF MEASUREMENT. PART 4: CALIBRATION TAPE (NTSC/PAL/SECAM) (Endorsed by AENOR in June of 1998.) | |
| NON-BROADCAST VIDEO TAPE RECORDERS. METHODS OF MEASUREMENT. PART 5: HIGH-BAND VIDEO TAPE RECORDERS, INCLUDING THOSE EQUIPPED WITH Y/C VIDEO CONNECTORS (NTSC/PAL) (Endorsed by AENOR in June of 1998.) | |
| NON-BROADCAST VIDEOTAPE RECORDERS. METHODS OF MEASUREMENT. PART 3: AUDIO CHARACTERISTICS FOR FM RECORDING. (Endorsed by AENOR in December of 1995.) | |
| Non-impregnated densified laminated wood for electrical purposes - Part 1: Definitions, designation and general requirements (Endorsed by AENOR in April of 2007.) | |
| Non-impregnated densified laminated wood for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 2: Rings produced from beech veneer. (Endorsed by AENOR in February of 2002.) | |
| NON-IMPREGNATED DENSIFIED LAMINATED WOOD FOR ELECTRICAL PURPOSES. PART 1: DEFINITIONS, DESIGNATION AND GENERAL REQUIREMENTS. (Endorsed by AENOR in July of 1998.) | |
| NON-IMPREGNATED DENSIFIED LAMINATED WOOD FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEETS 1: SHEETS PRODUCED FROM BEECH VENEER (Endorsed by AENOR in February of 1999.) | |
| Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems (Endorsed by AENOR in April of 2015.) | |
| Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems (Endorsed by AENOR in November of 2009.) | |
| Opportunity-charging of lead-acid traction batteries | |
| POLYESTER FIBRE WOVEN TAPES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 1: TAPES WOVEN ON CONVENTIONAL OR SHUTTLESLESS LOOMS. | |
| PORTABLE LEAD-ACID CELLS AND BATTERIES (VALVE-REGULATED TYPES). PART 1: GENERAL REQUIREMENTS, FUNCTIONAL CHARACTERISTICS. METHODS OF TEST. | |
| PORTABLE LEAD-ACID CELLS AND BATTERIES (VALVE-REGULATED TYPES). PART 2: DIMENSIONS, TERMINALS AND MARKING. | |
| Power and energy measuring detectors, instruments and equipment for laser radiation | |
| Programmes for reliability growth | |
| PROTECTION OF PERSONS AND EQUIPEMENT BY ENCLOSURES. PROBES FOR VERIFICATION. | |
| Protection of persons and equipment by enclosures - Probes for verification. | |
| Radiation protection instrumentation - Neutron ambient dose equivalent (rate) meters (Endorsed by AENOR in March of 2005.) | |
| Radiation protection instrumentation - Neutron ambient dose equivalent (rate) meters (Endorsed by Asociación Española de Normalización in March of 2017.) | |
| Radiation protection instrumentation - Neutron ambient dose equivalent (rate) meters | |
| RESIDUAL CURRENT OPERATED CIRCUIT-BRAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBO'S). PART 2-1: APPLICAB ITY OF THE GENERAL RULES TO RCBO'S FUNCTIONALLY INDEPENDENT OF LINE VOLTAGE. | |
| RESIDUAL CURRENT OPERATED CIRCUIT-BRAKERS WITHOUT INTEGRAL OVERCURRENTPROTECTIO N FOR HOUSEHOLD AND SIMILAR USES (RCCB'S). PART 2-1: APPLICABILITY OF THE GENERAL RULES TO RCCB'S FUNCTIONALLY INDEPENDENT OF LINE VOLTAGE. | |
| Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 1: General rules | |
| RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBO'S). PART 1: GENERAL RULES. | |
| RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBO'S). PART 2-1: APPLICABILITY OF THE GENERAL RULES TO RCBO'S FUNCTIONNALLY INDEPENDENT OF LINE VOLTAGE. | |
| Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules | |
| Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) - Part 1: General rules | |
| RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCB'S). PART 1: GENERAL RULES. | |
| RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCB'S). PART 2-1: APPLICABILITY OF THE GENERAL RULES TO RCCB'S FUNCTIONALLY INDEPENDENT OF LINE VOLTAGE. | |
| Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules | |
| S (Endorsed by AENOR in May of 1996.) | |
| SAFETAY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE. PART 2-010: PARTICULAR REQUIREMENTS FOR LABORATORY EQUIPMENT FOR THE HEATING OF MATERIALS. | |
| Safety of transportable motor-operated electric tools - Part 1: General requirements | |
| Safety of transportable motor-operated electric tools - Part 2-10: Particular requirements for cutting-off grinders | |
| Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench saws | |
| Safety of transportable motor-operated electric tools - Part 2-12: Particular requirements for threading machines | |
| Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saw benches | |
| Safety of transportable motor-operated electric tools - Part 2-3: Particular requirements for planers and thicknessers | |
| Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements for bench grinders | |
| Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws | |
| Safety of transportable motor-operated electric tools - Part 2-6: Particular requirements for diamond drills with water supply | |
| Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws | |
| Safety of transportable motor-operated electric tools -- Part 1: General requirements. | |
| Safety of transportable motor-operated electric tools -- Part 1: General requirements | |
| Safety of transportable motor-operated electric tools -- Part 2-11: Particular requirements for combined mitre and bench saws | |
| Safety of transportable motor-operated electric tools -- Part 2-1: Particular requirements for circular saw benches. | |
| Safety of transportable motor-operated electric tools -- Part 2-1: Particular requirements for circular saw benches | |
| Safety of transportable motor-operated electric tools -- Part 2-4: Particular requirements for bench grinders | |
| Safety of transportable motor-operated electric tools -- Part 2-5: Particular requirements for band saws | |
| Safety of transportable motor-operated electric tools -- Part 2-8: Particular requirements for single spindle vertical moulders | |
| Safety of transportable motor-operated electric tools -- Part 2-9: Particular requirements for mitre saws | |
| Safety of transportable motor-operated electric tools -- Part 2: Particular requirements for single spindle vertical moulders | |
| SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS. PART 1: GENERAL REQUIREMENTS. | |
| Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held and hand-manipulated probe assemblies for electrical test and measurement (Endorsed by Asociación... | |
| Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test (Endorsed by AENOR in October... | |
| Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test | |
| Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of Materials | |
| Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment (Endorsed by Asociación Española... | |
| Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials | |
| Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring (Endorsed by AENOR in June of 2015.)... | |
| Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization (Endorsed by AENOR in June... | |
| Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes (Endorsed by AENOR... | |
| Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes | |
| Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-091: Particular requirements for cabinet x-ray systems | |
| Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment | |
| Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-201: Particular requirements for control equipment (Endorsed by AENOR in July of 2013.) | |
| Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-201: Particular requirements for control equipment (Endorsed by AENOR in November of 2013.) | |
| Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202: Particular requirements for electrically operated valve actuators (Endorsed by Asociación Española de Normalización in June of... | |
| Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test | |
| Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 1: General requirements | |
| Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement | |
| SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE. PART 1: GENERAL REQUIREMENTS. | |
| SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE. PART 2-010: PARTICULAR REQUIREMENTS FOR LABORATORY EQUIPMENT FOR THE HEATING OF MATERIALS. | |
| SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE. PART 2-020: PARTICULAR REQUIREMENTS FOR LABORATORY CENTRIFUGES. | |
| SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE. PART 2-031: PARTICULAR REQUIREMENTS FOR HAND-HELD PROBE ASSEMBLIES FOR ELECTRICAL MEASUREMENT AND TEST. | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of material | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011: Particular requirements for refrigerating equipment | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges (Endorsed by Asociación Española de Normalización in June of 2017.) | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030: Particular requirements for testing and measuring circuits | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-033: Particular requirements for hand-held multimeters and other meters, for domestic and professional use, capable of measuring... | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040 Particular requirements for sterilizers and washer-disinfectors used to treat medical materials (Endorsed by AENOR in November... | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 1: General requirements | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 2-010: Particular requirements for laboratory equipment for the heating of material. | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 2-045: Particular requirements for washer disinfectors used in medical, pharmaceutical, veterinary and laboratory fields. | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization | |
| SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE. PART 2-032: PARTICULAR REQUIREMENTS FOR HAND-HELD CURRENT CLAMPS FOR ELECTRICAL MEASUREMENT AND TEST. | |
| SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE. PART 2-041: PARTICULAR REQUIREMENTS FOR AUTOCLAVES USING STEAM FOR THE TREATMENT OF MEDICAL MATERIALS, AND FOR LABORATORY PROCESSES. | |
| SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE. PART 2-042: PARTICULAR REQUIREMENTS FOR AUTOCLAVES AND STERILIZERS USING TOXIC GAS FOR THE TREATMENT OF MEDICAL MATERIALS, AND FOR... | |
| SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE. PART 2-043: PARTICULAR REQUIREMENTS FOR DRY HEAT STERILIZERS USING EITHER HOT AIR OR HOT INERT GAS FOR THE TREATMENT... | |
| SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE. PART 2-051: PARTICULAR REQUIREMENTS FOR LABORATORY EQUIPMENT FOR MECHANICAL MIXING AND STIRRING. | |
| SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE. PART 2-061: PARTICULAR REQUIREMENTS FOR LABORATORY ATOMIC SPECTROMETERS WITH THERMAL ATOMIZATION AND IONIZATION. | |
| SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENTS FOR MEASUREMENT, CONTROLAND LABORATORY USE. PART 1: GENERAL REQUIREMENTS. | |
| SIWTCHES FOR APPLIANCES. PART 1: GENERAL REQUIREMENTS. | |
| SLEEVES OF INSULATING MATERIAL FOR LIVE WORKING. | |
| SPECIFICATION FOR GLASS AND GLASS POLYESTER FIBRE WOVEN TAPES. PART 1: DEFINITIONS, CLASSIFICATION AND GENERAL REQUIREMENTS. | |
| SPECIFICATION FOR GLASS AND GLASS POLYESTER FIBRE WOVEN TAPES. PART 2: METHODS OF TEST. | |
| Specification for non-impregnated, densified laminated wood for electrical purposes - Part 2: Methods of test. (Endorsed by AENOR in February of 2002.) | |
| Specification for non-impregnated, densified laminated wood for electrical purposes -- Part 2: Methods of test (Endorsed by AENOR in May of 2002.) | |
| Specification for non-impregnated, densified laminated wood for electrical purposes -- Part 2: Methods of test. (Endorsed by AENOR in February of 2002.) | |
| SPECIFICATION FOR POLYESTER FIBRE WOVEN TAPES. PART 1: DEFINITIONS, DESIGNATION AND GENERAL REQUIREMENTS. | |
| SPECIFICATION FOR POLYESTER FIBRE WOVEN TAPES. PART 2: METHODS OF TEST. | |
| Surface acoustic wave (SAW) resonators -- Part 2: Guide to the use (Endorsed by AENOR in September of 2005.) | |
| Surface acoustic wave (SAW) resonators of assessed quality -- Part 1: Generic specification (Endorsed by AENOR in April of 2005.) | |
| SURFACE ACOUSTIC WAVE (SAW) RESONATORS. PART 2: GUIDE TO THE USE (Endorsed by AENOR in June of 1998.) | |
| Switches for appliances - Part 1-1: Requirements for mechanical switches (Endorsed by AENOR in November of 2016.) | |
| Switches for appliances - Part 1-1: Requirements for mechanical switches (Endorsed by Asociación Española de Normalización in April of 2019.) | |
| Switches for appliances - Part 1-2: Requirements for electronic switches (Endorsed by AENOR in November of 2016.) | |
| Switches for appliances - Part 1-2: Requirements for electronic switches (Endorsed by Asociación Española de Normalización in April of 2019.) | |
| Switches for appliances - Part 1: General requirements | |
| Switches for appliances - Part 2-1: Particular requirements for cord switches | |
| Switches for appliances - Part 2-4: Particular requirements for independently mounted switches | |
| Switches for appliances - Part 2-5: Particular requirements for change-over selectors | |
| Switches for appliances - Part 2-6: Particular requirements for switches used in electric motor-operated hand-held tools, transportable tools and lawn and garden machinery (Endorsed by AENOR in December of 2016.)... | |
| Switches for appliances -- Part 1: General requirements | |
| Switches for appliances -- Part 2-1: Particular requirements for cord switches. | |
| Switches for appliances -- Part 2-1: Particular requirements for cord switches | |
| Switches for appliances -- Part 2-5: Particular requirements for change-over selectors | |
| SWITCHES FOR APPLIANCES. PART 1: GENERAL REQUIREMENTS. | |
| SWITCHES FOR APPLIANCES. PART 2-1: PARTICULAR REQUIREMENTS FOR CORD SWITCHES. | |
| SWITCHES FOR APPLIANCES. PART 2-5: PARTICULAR REQUIREMENTS FOR CHANGE-OVER SELECTORS. | |
| Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate (IEC 61033:1991 + A1:2006). (Endorsed by AENOR in April of 2007.) | |
| TIME SWITCHES FOR TARIFF AND LOAD CONTROL. | |
| Tin and tin alloys - Ingot tin | |
| Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures | |
| TRANSFORMERS FOR TUBULAR DISCHARGE LAMPS HAVING A NO-LOAD OUTPUT VOLTAGE EXCEEDING 1 000 V (GENERALLY CALLED NEON-TRANSFORMERS). GENERAL AND SAFETY REQUIREMETS. | |
| TRANSFORMERS FOR TUBULAR DISCHARGE LAMPS HAVING A NO-LOAD OUTPUT VOLTAGE EXCEEDING 1000 V (GENERALLY CALLED NEON-TRANSFORMERS). GENERAL AND SAFETY REQUIREMENTS. | |
| Varistors for use in electronic equipment - Part 1: Generic specification |
| << Prev | Next >> |