Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
400
450
500
550
600
650
670
680
690
700
710
720
730
731
732
733
734
735
736
737
738
739
740
741
742
750
760
770
780
790
800
850
900
950
1000
1050
1100
1500
1620
| Product Name | Notes |
|---|---|
| 3-D human body scan data \x96 Methods for the processing of human body scan data | |
| Accessible design - Application of braille on signage, equipment and appliances | |
| Accessible design \x96 Consideration and assistive products for accessible meeting | |
| Acoustics - Loudness scaling by means of categories | |
| Acoustics - Software for the calculation of sound outdoors - Part 1: Quality requirements and quality assurance | |
| Acoustics - Sound scattering properties of surfaces - Part 1: Measurement of the random-incidence scattering coefficient in a reverberation room | |
| Acoustics - Sound-scattering properties of surfaces - Part 2: Measurement of the directional diffusion coefficient in a free field | |
| Acoustics \x96 Field measurement of sound insulation in buildings and of building elements \x96 Part 2: Impact sound insulation | |
| Acoustics \x96 Measurement of sound emitted by road vehicles of category M and N at standstill and low speed operation \x96 Engineering method | |
| Acoustics \x96 Noise from shooting ranges \x96 Part 3: Sound propagation calculations | |
| Acoustics \x96 Noise from shooting ranges \x96 Part 6: Sound pressure measurements close to the source for determining exposure to sound | |
| Additive manufacturing \x96 General principles \x96 Overview of data processing | |
| Additive manufacturing \x96 General principles \x96 Part 2: Overview of process categories and feedstock | |
| Additive manufacturing \x96 General principles \x96 Part 3: Main characteristics and corresponding test methods | |
| Additive manufacturing \x96 General principles \x96 Part positioning, coordinates and orientation | |
| Adhesives \x96 Adhesives for bonding parquet to subfloor \x96 Test methods and minimum requirements | |
| Agricultural and forestry tractors and implements \x96 Hydraulic power beyond | |
| Aids for ostomy and incontinence - Irrigation sets - Requirements and test methods | |
| Air filters for general ventilation \x96 Part 2: Measurement of fractional efficiency and air flow resistance | |
| Ambient air - Determination of particle-phase polycyclic aromatic hydrocarbons by high performance liquid chromatography | |
| Anaesthetic and respiratory equipment \x96 Respiratory therapy tubing and connectors | |
| Animal and vegetable fats and oils - Determination of aliphatic hydrocarbons in vegetable oils | |
| Animal feeding stuffs - Determination of zearalenone by immunoaffinity column chromatography and high performance liquid chromatography - AMENDMENT 1: Limitation of the scope | |
| Animal feeding stuffs - Determination of zearalenone by immunoaffinity column chromatography and high performance liquid chromatography | |
| Application of statistical and related methods to new technology and product development process \x96 Part 1: General principles and perspectives of quality function deployment (QFD) | |
| Applications of statistical and related methods to new technology and product development process \x96 Part 3: Quantitative approaches for the acquisition of voice of customer and voice of stakeholder | |
| Assistive products for personal hygiene that support users \x96 Requirements and test methods | |
| Automation systems and integration \x96 Equipment behaviour catalogues for virtual production system \x96 Part 3: Requirements and recommendations for construction of an equipment instance model | |
| Automation systems and integration \x96 Equipment behaviour catalogues for virtual production systems \x96 Part 2: Formal description of a catalogue template | |
| Automation systems and integration \x96 Interoperability of capability units for manufacturing application solutions \x96 Part 1: Interoperability criteria of capability units per application requirements | |
| Automation systems and integration \x96 Interoperability of capability units for manufacturing application solutions \x96 Part 2: Capability templates and software unit cataloguing | |
| Automation systems and integration \x96 Interoperability of capability units for manufacturing application solutions \x96 Part 4: Capability unit assessment for the manufacturing application requirements | |
| Bidis \x96 Determination of total and nicotine-free dry particulate matter using a linear routine analytical smoking machine | |
| Biobanking \x96 Germplasm \x96 Part 1: Agricultural animal species | |
| Biomechanical effects on amusement ride passengers | |
| Boilers and pressure vessels - Part 1: Performance requirements | |
| Boilers and pressure vessels - Part 2: Procedures for fulfilling the requirements of ISO 16528-1 | |
| Brazing \x96 Filler metals | |
| Brazing \x96 Specification and qualification of brazing procedures for metallic materials | |
| Building automation and control systems (BACS) \x96 Part 1: Project specification and implementation | |
| Building automation and control systems (BACS) \x96 Part 2: Hardware | |
| Building automation and control systems (BACS) \x96 Part 6: Data communication conformance testing | |
| Building environment design - Indoor air quality - Methods of expressing the quality of indoor air for human occupancy | |
| Building environment design \x96 Indoor environment \x96 Design process for the visual environment | |
| Building environment design \x96 Indoor environment \x96 General principles | |
| Butter - Determination of salt content | |
| Butter - Determination of the firmness | |
| Clinical laboratory testing and in vitro diagnostic test systems \x96 Broth micro-dilution reference method for testing the in vitro activity of antimicrobial agents against yeast fungi involved in infectious diseases... | |
| Clinical laboratory testing and in vitro medical devices \x96 Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy | |
| Clothing and equipment for protection against heat \x96 Test method for convective heat resistance using a hot air circulating oven | |
| Clothing for protection against contact with blood and body fluids - Determination of the resistance of protective clothing materials to penetration by blood and body fluids - Test method using... | |
| Clothing for protection against contact with blood and body fluids -Determination of resistance of protective clothing materials to penetration by blood-borne pathogens - Test method using Phi-X-174 bacteriophage | |
| Clothing for protection against heat and flame - Determination of heat transmission on exposure to both flame and radiant heat | |
| Coal \x96 Proximate analysis | |
| Computer applications in terminology \x96 Terminological markup framework | |
| Condition monitoring and diagnostics of machines \x96 General guidelines | |
| Condition monitoring and diagnostics of power transformers | |
| Corrosion control engineering life cycle of power transmission and transformation systems \x96 General requirements | |
| Corrosion of metals and alloys \x96 Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process \x96 "Dry" and "wet" conditions at constant absolute humidity | |
| Corrosion of metals and alloys \x96 Corrosion and fouling in industrial cooling water systems \x96 Part 1: Guidelines and requirements for conducting pilot-scale evaluation of corrosion and fouling control additives... | |
| Corrosion of metals and alloys \x96 Corrosion in artificial atmosphere \x96 Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution | |
| Corrosion of metals and alloys \x96 Determination of AC corrosion \x96 Protection criteria | |
| Corrosion protection of steel structures by protective paint systems \x96 Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating \x96 Part 1: Pull-off testing | |
| Corrosion protection of steel structures by protective paint systems \x96 Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating \x96 Part 2: Cross-cut testing and X-cut... | |
| Cosmetics \x96 Sun protection test methods \x96 Water immersion procedure for determining water resistance | |
| Cranes and hoists \x96 Selection of wire ropes, drums and sheaves | |
| Crop protection equipment - Test method for the determination of drainable volume and its concentration | |
| Data structures for electronic product catalogues for building services - Part 1: Concepts, architecture and model | |
| Data structures for electronic product catalogues for building services \x96 Part 2: Geometry | |
| Dentistry \x96 Fluoride varnishes | |
| Dentistry \x96 Nomenclature of oral anomalies \x96 Part 1: Code for the representation of oral anomalies | |
| Dentistry \x96 Nomenclature of oral anomalies \x96 Part 2: Developmental anomalies of teeth | |
| Dentistry \x96 Oral care products \x96 Oral rinses | |
| Design of concrete-filled steel tubular (CFST) hybrid structures | |
| Destructive tests on welds in metallic materials \x96 Macroscopic and microscopic examination of welds | |
| Dimethyl ether (DME) for fuels - Determination of high temperature (105\xb0C) evaporation residues - Mass analysis method | |
| Dimethyl ether (DME) for fuels - Determination of impurities - Gas chromatographic method | |
| Dimethyl ether (DME) for fuels - Determination of total sulfur, ultraviolet fluorescence method | |
| Dimethyl ether (DME) for fuels - Determination of water content - Karl Fischer titration method | |
| Document management - Strategy markup language (StratML) - Part 1: StratML core elements | |
| Dry-cured ham \x96 Specification | |
| Electrically propelled road vehicles \x96 Conductive power transfer \x96 Safety requirements | |
| Electronic fee collection \x96 System architecture for vehicle-related tolling \x96 Part 1: Reference model (ISO 17573-1:2019) | |
| Electronic fee collection \x96 System architecture for vehicle-related tolling \x96 Part 3: Data dictionary | |
| Energy efficiency and savings calculation for countries, regions and cities | |
| Eye and face protection for occupational use \x96 Part 1: General requirements \x96 Amendment 1 | |
| Eye and face protection for occupational use \x96 Part 1: General requirements | |
| Eye and face protection for occupational use \x96 Part 2: Additional requirements for protectors used during welding and related techniques | |
| Eye and face protection for occupational use \x96 Part 3: Additional requirements for mesh protectors | |
| Facility smart grid information model | |
| Financial services \x96 Legal entity identifier (LEI) \x96 Part 1: Assignment | |
| Financial services \x96 Legal entity identifier (LEI) \x96 Part 2: Application in digital certificates | |
| Financial services \x96 Legal entity identifier (LEI) \x96 Part 3: Verifiable LEIs (vLEIs) | |
| Financial services \x96 Legal Entity Identifier (LEI) | |
| Financial services \x96 Requirements for message authentication using symmetric techniques | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Determination of compaction properties of ceramic powders | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Determination of corrosion resistance of monolithic ceramics in acid and alkaline solutions | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Mechanical properties of ceramic composites at room temperature \x96 Determination of flexural strength | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Methods for chemical analysis of fine silicon nitride powders | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Test method for linear thermal expansion of monolithic ceramics by push-rod technique | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Thermophysical properties of ceramic composites \x96 Determination of thermal expansion | |
| Fire safety engineering - Fire risk assessment - Part 1: General | |
| Fire safety engineering - Procedures and requirements for verification and validation of calculation methods - Part 1: General | |
| Fire safety engineering - Requirements governing algebraic equations - Ceiling jet flows | |
| Fire safety engineering - Requirements governing algebraic equations - Fire plumes | |
| Fire safety engineering - Requirements governing algebraic equations - Smoke layers | |
| Fire safety engineering - Selection of design fire scenarios and design fires - Part 1: Selection of design fire scenarios | |
| Fire safety engineering \x96 Requirements governing algebraic equations \x96 Vent flows | |
| Flour from wheat (Triticum aestivum L.) \x96 Amperometric method for starch damage measurement | |
| Footwear \x96 Critical substances potentially present in footwear and footwear components \x96 Test method to quantitatively determine polycyclic aromatic hydrocarbons (PAHs) in footwear materials | |
| Footwear \x96 Test methods for upper components and insocks \x96 Colour fastness to rubbing and bleeding | |
| Freight containers - Mechanical seals | |
| Furniture \x96 Assessment of the ignitability of mattresses and upholstered bed bases \x96 Part 1: Ignition source: smouldering cigarette | |
| Furniture \x96 Assessment of the ignitability of mattresses and upholstered bed bases \x96 Part 2: Ignition source: match flame equivalent | |
| Gas cylinders \x96 Quick-release cylinder valves \x96 Specification and type testing \x96 Amendment 1 | |
| Gas cylinders \x96 Quick-release cylinder valves \x96 Specification and type testing | |
| Gas cylinders \x97 Flexible hoses assemblies \x97 Specification and testing | |
| Gaseous hydrogen land vehicle refuelling connection devices | |
| GEDI - Generic Electronic Document Interchange | |
| Geometrical product specifications (GPS) \x96 Filtration \x96 Part 29: Linear profile filters: wavelets | |
| Geometrical product specifications (GPS) \x96 Filtration \x96 Part 30: Robust profile filters: Basic concepts | |
| Geometrical product specifications (GPS) \x96 Filtration \x96 Part 31: Robust profile filters: Gaussian regression filters | |
| Geometrical product specifications (GPS) \x96 Filtration \x96 Part 45: Morphological profile filters: Segmentation | |
| Geometrical product specifications (GPS) \x96 Filtration \x96 Part 62: Linear areal filters: spline filters | |
| Geotechnical investigation and testing \x96 Laboratory testing of rock \x96 Part 1: Determination of water content | |
| Geotechnical investigation and testing \x96 Laboratory testing of soil \x96 Part 10: Direct shear tests | |
| Geotechnical investigation and testing \x96 Laboratory testing of soil \x96 Part 11: Permeability tests | |
| Geotechnical investigation and testing \x96 Laboratory testing of soil \x96 Part 12: Determination of liquid and plastic limits \x96 Amendment 1 | |
| Geotechnical investigation and testing \x96 Laboratory testing of soil \x96 Part 12: Determination of liquid and plastic limits \x96 Amendment 2 | |
| Geotechnical investigation and testing \x96 Laboratory testing of soil \x96 Part 12: Determination of liquid and plastic limits | |
| Glass in building \x96 Basic soda lime silicate glass products \x96 Part 2: Float glass | |
| Glass in building \x96 Basic soda lime silicate glass products \x96 Part 3: Polished wired glass | |
| Graphic technology - Colour data exchange format - Part 1: Relationship to CxF3 (CxF/X) | |
| Graphic technology - Extensible metadata platform (XMP) - Part 2: Description of XMP schemas using RELAX NG | |
| Graphic technology - Post-press - Requirements for bound products | |
| Graphic technology - Prepress data exchange - Preparation and visualization of RGB images to be used in RGB-based graphics arts workflows | |
| Graphic technology - Quantification and communication for calculating the carbon footprint of print media products | |
| Graphic technology \x96 Colour data exchange format (CxF/X) \x96 Part 2: Scanner target data (CxF/X-2) | |
| Graphic technology \x96 Colour data exchange format (CxF/X) \x96 Part 3: Output target data (CxF/X-3) | |
| Graphic technology \x96 Colour data exchange format (CxF/X) \x96 Part 4: Spot colour characterisation data (CxF/X-4) | |
| Graphic technology \x96 Extensible metadata platform (XMP) specification \x96 Part 3: JSON-LD serialization of XMP | |
| Graphic technology \x96 Extensible metadata platform (XMP) specification \x96 Part 4: Use of XMP for semantic units | |
| Graphic technology \x96 Post-press \x96 General requirements for transfer, handling and storage | |
| Graphic technology and photography - Colour characterisation of digital still cameras (DSCs) - Part 1: Stimuli, metrology and test procedures | |
| Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment \x96 Part 1: Criteria | |
| Guide for the use of preferred numbers and of series of preferred numbers | |
| Guidelines for knowledge libraries and object libraries | |
| Health informatics - Public key infrastructure - Part 2: Certificate profile | |
| Health informatics \x96 Development of terms and definitions for health informatics glossaries | |
| Health informatics \x96 Public key infrastructure \x96 Part 1: Overview of digital certificate services | |
| Health informatics \x96 Public key infrastructure \x96 Part 3: Policy management of certification authority | |
| Health informatics \x96 Public key infrastructure \x96 Part 4: Digital Signatures for healthcare documents | |
| Health informatics \x96 Terminological resources \x96 Part 1: Characteristics | |
| Health informatics \x96 Vocabulary for terminological systems | |
| Impact assessment for museums | |
| Implants for surgery - Acrylic resin cement - Flexural fatigue testing of acrylic resin cements used in orthopaedics | |
| Implants for surgery - Measurements of open-circuit potential to assess corrosion behaviour of metallic implantable materials and medical devices over extended time periods | |
| Implants for surgery - Test solutions and environmental conditions for static and dynamic corrosion tests on implantable materials and medical devices | |
| In vitro diagnostic medical devices \x96 Requirements for establishing metrological traceability of values assigned to calibrators, trueness control materials and human samples | |
| In vitro diagnostic test systems \x96 Nucleic acid amplification-based examination procedures for detection and identification of microbial pathogens \x96 Laboratory quality practice guide | |
| Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries \x96 Part 1: Data schema | |
| Information and documentation - International standard link identifier (ISLI) | |
| Information and documentation - Methods and procedures for assessing the impact of libraries | |
| Information and documentation \x96 Boxes, file covers and other enclosures, made from cellulosic materials, for storage of paper and parchment documents | |
| Intelligent transport systems \x96 Application requirements and objectives | |
| Intelligent transport systems \x96 Globally unique identification | |
| Leather \x96 Chemical determination of formaldehyde content \x96 Part 1: Method using high performance liquid chromatography | |
| Leather \x96 Chemical determination of formaldehyde content \x96 Part 2: Method using colorimetric analysis | |
| Leather \x96 Chemical determination of metal content \x96 Part 1: Extractable metals | |
| Leather \x96 Chemical determination of metal content \x96 Part 2: Total metal content | |
| Leather \x96 Chemical tests for the determination of certain azo colourants in dyed leathers \x96 Part 1: Determination of certain aromatic amines derived from azo colourants | |
| Leather \x96 Determination of abrasion resistance \x96 Part 1: Taber method | |
| Leather \x96 Identification of leather with microscopy | |
| Leather \x96 Physical and mechanical tests \x96 Determination of dimensional change | |
| Marine finfish farms - Open net cage - Design and operation | |
| Measurement of apparent thermal conductivity of wet porous building materials by a periodic method | |
| Measurement of fluid flow in closed conduits \x96 Ultrasonic meters for gas \x96 Part 1: Meters for custody transfer and allocation measurement | |
| Medical devices \x96 Sleep apnoea breathing therapy \x96 Masks and application accessories | |
| Metallic and other inorganic coatings \x96 Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test) | |
| Metallic materials \x96 Sheet and strip \x96 Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems | |
| Meteorology - Air temperature measurements - Test methods for comparing the performance of thermometer shields/screens and defining important characteristics | |
| Methods for sea lice surveillance on marine finfish farms | |
| Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of \xdf-glucuronidase-p ositive Escherichia coli - Part 2: Colony-count technique at 44\xb0C using 5-bromo-4-chloro-3-i ndolyl-\xdf-D-glucor onide | |
| Microbiology of food and animal feeding stuffs \x96 Horizontal method for the enumeration of \xdf-glucuronidase-p ositive Escherichia coli \x96 Part 1: Colony-count technique at 44\xb0C using membranes and 5-bromo-4-chloro-3-i ndolyl-\xdf-D-glucor... | |
| Microbiology of food and animal feeding stuffs \x96 Horizontal method for the enumeration of psychrotrophic microorganisms | |
| Milk - Determination of casein-nitrogen content - Part 1: Indirect method (Reference method) | |
| Milk - Determination of casein-nitrogen content - Part 2: Direct method | |
| Milk \x96 Bacterial count \x96 Protocol for the evaluation of alternative methods | |
| Milk and milk products \x96 Determination of milk fat purity by gas chromatographic analysis of triglycerides (ISO 17678:2019) | |
| Milk, milk products and mesophilic starter cultures - Enumeration of citrate-fermenting lactic acid bacteria - Colony-count technique at 25 degrees C | |
| Milk, milk products, infant formula and adult nutritionals \x96 Determination of fatty acids composition \x96 Capillary gas chromatographic method | |
| Mobile elevating work platforms \x96 Design, calculations, safety requirements and test methods relative to special features \x96 Part 2: MEWPs with non-conductive (insulating) components | |
| Mobile elevating work platforms \x96 Design, calculations, safety requirements and test methods | |
| Molecular biomarker analysis - Terms and definitions | |
| Molecular biomarker analysis \x96 DNA barcoding of fish and fish products using defined mitochondrial cytochrome b and cytochrome c oxidase I gene segments | |
| Molecular biomarker analysis \x96 General definitions and requirements for microarray detection of specific nucleic acid sequences | |
| Monitoring radioactive gases in effluents from facilities producing positron emitting radionuclides and radiopharmaceuticals | |
| Motorcycles - Measurement methods for gaseous exhaust emissions during inspection or maintenance | |
| Motorcycles \x96 Measurement methods for gaseous exhaust emissions during inspection or maintenance \x96 AMENDMENT 1 | |
| Nanotechnology \x96 Nanoparticles in powder form \x96 Characteristics and measurements | |
| Non-active surgical implants \x96 Implant coating \x96 Part 1: General requirements | |
| Non-destructive testing \x96 Acoustic emission testing (AT) \x96 Leak detection by means of acoustic emission | |
| Non-destructive testing \x96 Measurement and evaluation of the X-ray tube voltage \x96 Part 1: Voltage divider method | |
| Non-destructive testing \x96 Measurement and evaluation of the X-ray tube voltage \x96 Part 2: Constancy check by the thick filter method | |
| Non-destructive testing \x96 Measurement and evaluation of the X-ray tube voltage \x96 Part 3: Spectrometric method | |
| Non-destructive testing \x96 Ultrasonic testing \x96 Characterization and sizing of discontinuities | |
| Non-destructive testing \x96 Ultrasonic testing \x96 Characterization and verification of ultrasonic equipment for the determination of thickness | |
| Non-destructive testing \x96 Ultrasonic testing \x96 Sensitivity and range setting | |
| Non-destructive testing \x96 Ultrasonic testing \x96 Specification for a step wedge standard block | |
| Non-destructive testing \x96 Ultrasonic testing \x96 Technique of testing claddings produced by welding, rolling and explosion | |
| Non-destructive testing \x96 Ultrasonic testing \x96 Testing for discontinuities perpendicular to the surface | |
| Non-destructive testing \x96 Ultrasonic testing \x96 Through-transmission technique | |
| Non-destructive testing \x96 Ultrasonic thickness measurement | |
| Non-destructive testing of welds \x96 General rules for metallic materials | |
| Non-destructive testing of welds \x96 Radiographic testing \x96 Part 2: X- and gamma-ray techniques with digital detectors | |
| Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT) | |
| Nuclear energy \x96 Determination of Gd2O3 content in gadolinium fuel blends and gadolinium fuel pellets by atomic emission spectrometry using an inductively coupled plasma source (ICP-AES) | |
| Nuclear facilities \x96 Criteria for design and operation of confinement systems for nuclear worksite and for nuclear installations under decommissioning | |
| Nuclear fuel technology \x96 Guidelines for ceramographic preparation of UO2 sintered pellets for microstructure examination | |
| Oil and gas industries including lower carbon energy \x96 Internal coating and lining of steel storage tanks | |
| Oilseeds \x96 Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (Rapid method) | |
| Ophthalmic implants \x96 Irrigating solutions for ophthalmic surgery | |
| Ophthalmic implants \x96 Ocular endotamponades | |
| Ophthalmic instruments - Optical coherence tomograph for the posterior segment of the human eye | |
| Ophthalmic instruments \x96 Optical coherence tomographs \x96 Part 1: Optical coherence tomographs for the posterior segment of the human eye | |
| Packaging - Braille on packaging for medicinal products | |
| Packaging \x96 Accessible design \x96 Ease of opening | |
| Packaging \x96 Transport packages for dangerous goods \x96 Test methods for large packagings | |
| Packaging \x96 Transport packaging for dangerous goods \x96 Test methods | |
| Paints and varnishes - Methods of exposure to laboratory light sources - Part 4: Open-flame carbon-arc lamps | |
| Paints and varnishes \x96 Determination of the resistance of coatings to pressure water-jetting | |
| Paints and varnishes \x96 Determination of volatile organic compound (VOC) \x96 Gas-chromatographic method with headspace injection for VOC determination | |
| Paints and varnishes \x96 Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing (ISO 17872:2019) | |
| Paints and varnishes \x96 Methods of exposure to laboratory light sources \x96 Part 3: Fluorescent UV lamps | |
| Particle size analysis \x96 Small-angle X-ray scattering | |
| Petroleum products - Fuels (class F) - Specifications of dimethyl ether (DME) | |
| Petroleum, petrochemical and natural gas industries \x96 Shell-and-tube heat exchangers | |
| Photography - Digital cameras - Geometric distortion (GD) measurements | |
| Photography - Digital cameras - Shading measurements | |
| Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure - Specifications | |
| Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure \x96 Part 1: General | |
| Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure \x96 Part 2: Pipes | |
| Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure \x96 Part 5: Fitness for purpose of the system | |
| Plastics \x96 Biobased content \x96 Part 4: Determination of biobased mass content | |
| Plastics \x96 Determination of Charpy impact properties \x96 Part 1: Non-instrumented impact test | |
| Plastics \x96 Determination of Charpy impact properties \x96 Part 2: Instrumented impact test (ISO 179-2:2020) | |
| Plastics \x96 Determination of flexural properties | |
| Plastics \x96 Determination of Izod impact strength | |
| Plastics \x96 Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test | |
| Plastics \x96 Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved (ISO 17556:2019)... | |
| Plastics \x96 Determination of the viscosity of polymers in dilute solution using capillary viscometers \x96 Part 1: General principles | |
| Plastics \x96 Determination of the viscosity of polymers in dilute solution using capillary viscometers \x96 Part 2: Poly(vinyl chloride) resins | |
| Plastics \x96 Disintegration field test of plastics under water environmental conditions | |
| Plastics \x96 Environmental aspects \x96 General guidelines for their inclusion in standards | |
| Plastics \x96 Film and sheeting \x96 Biaxially oriented polypropylene (PP) films | |
| Plastics \x96 Liquid resins \x96 Determination of density by the pycnometer method | |
| Plastics \x96 Marine biodegradation testing \x96 Preparation of optimized intertidal seawater and sediment | |
| Plastics \x96 Organic recycling \x96 Specifications for compostable plastics | |
| Plastics \x96 Polyamide (PA) moulding and extrusion materials \x96 Part 1: Designation system and basis for specifications | |
| Plastics \x96 Polyamide (PA) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties | |
| Plastics \x96 Polyethylene (PE) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties | |
| Plastics piping systems - Multilayer pipes - Determination of long-term strength | |
| Plastics piping systems - Multilayer pipes - Determination of the oxygen permeability of the barrier pipe | |
| Plastics piping systems - Multilayer pipes - Test method for the adhesion of the different layers using a pulling rig | |
| Plastics piping systems for the supply of gaseous fuels \x96 Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing \x96 Part 1: General | |
| Plastics piping systems for the supply of gaseous fuels \x96 Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing \x96 Part 2: Pipes | |
| Plastics piping systems for the supply of gaseous fuels \x96 Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing \x96 Part 3: Fittings | |
| Plastics piping systems for the supply of gaseous fuels \x96 Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing \x96 Part 5: Fitness for purpose of the system... | |
| PPE ensembles for firefighters undertaking hazardous materials response activities \x96 Part 1: Gas-tight, vapour-protective ensembles for emergency response teams ("type 1") | |
| Processing of health care products \x96 Information to be provided by the medical device manufacturer for the processing of medical devices \x96 Part 1: Critical and semi-critical medical devices | |
| Processing of health care products \x96 Information to be provided by the medical device manufacturer for the processing of medical devices \x96 Part 2: Non-critical medical devices | |
| Protective clothing \x96 Test methods for clothing providing protection against chemicals \x96 Part 4: Determination of resistance to penetration by a spray of liquid (spray test) | |
| Protective clothing \x96 Test methods for clothing providing protection against chemicals \x96 Part 5: Determination of resistance to penetration by a spray of liquid (manikin spray test) | |
| Protective clothing for protection against chemicals - Classification, labelling and performance requirements - AMENDMENT 1 | |
| Protective clothing for protection against chemicals - Classification, labelling and performance requirements | |
| Quality management systems \x96 Guidelines for the application of ISO 9001:2008 in local government | |
| Quick-frozen coated aquatic products \x96 Specification | |
| Radiological protection \x96 Medical electron accelerators \x96 Requirements and recommendations for shielding design and evaluation | |
| Radiological protection \x96 Monitoring and internal dosimetry for specific materials \x96 Part 2: Ingestion of uranium compounds | |
| Radiological protection \x96 Monitoring and internal dosimetry for staff members exposed to medical radionuclides as unsealed sources | |
| Radiological protection \x96 Performance criteria for laboratories using the cytokinesis-block micronucleus (CBMN) assay in peripheral blood lymphocytes for biological dosimetry | |
| Rapid detection of moisture content in fresh meat \x96 Low-field nuclear magnetic resonance (LF-NMR) method | |
| Reaction to fire tests - Mass loss measurement | |
| Refrigerant properties | |
| Resilient and laminate floor coverings \x96 Determination of the effect of simulated movement of a furniture leg | |
| Resilient floor coverings \x96 Determination of seam strength | |
| Resistance welding \x96 Vocabulary \x96 Part 1: Spot, projection and seam welding | |
| Respiratory protective devices - Methods of test and test equipment - Part 10: Resistance to ignition, flame, radiant heat and heat | |
| Respiratory protective devices - Methods of test and test equipment - Part 11: Determination of field of vision | |
| Respiratory protective devices - Methods of test and test equipment - Part 13: RPD using regenerated breathable gas and special application mining escape RPD: Consolidated test for gas concentration, temperature,... | |
| Respiratory protective devices - Methods of test and test equipment - Part 8: Measurement of RPD air flow rates of assisted filtering RPD | |
| Respiratory protective devices - Methods of test and test equipment - Part 9: Determination of carbon dioxide content of the inhaled gas | |
| Respiratory protective devices -- Methods of test and test equipment-- Part 7: Practical performance test methods | |
| Respiratory protective devices \x96 Methods of test and test equipment \x96 Part 12: Determination of volume-averaged work of breathing and peak respiratory pressures | |
| Respiratory protective devices \x96 Methods of test and test equipment \x96 Part 14: Measurement of sound level | |
| Respiratory protective devices \x96 Methods of test and test equipment \x96 Part 1: Determination of inward leakage | |
| Respiratory protective devices \x96 Methods of test and test equipment \x96 Part 2: Determination of breathing resistance | |
| Respiratory protective devices \x96 Methods of test and test equipment \x96 Part 5: Breathing machine, metabolic simulator, RPD headforms and torso, tools and verification tools | |
| Respiratory protective devices \x96 Methods of test and test equipment \x96 Part 6: Mechanical resistance/strength of components and connections | |
| Respiratory protective devices \x96 Performance requirements \x96 Part 1: General | |
| Respiratory protective devices \x96 Performance requirements \x96 Part 2: Requirements for filtering RPD | |
| Respiratory protective devices \x96 Performance requirements \x96 Part 4: Requirements for supplied breathable gas RPD | |
| Respiratory protective devices \x96 Performance requirements \x96 Part 5: Special application fire and rescue services \x96 Supplied breathable gas RPD and filtering RPD | |
| Respiratory protective devices \x96 Performance requirements \x96 Part 6: Special application escape \x96 Filtering RPD and supplied breathable gas RPD | |
| Respiratory protective devices \x96 Performance requirements \x96 Part 7: Special application marine, mining, welding, and abrasive blasting \x96 Filtering RPD and supplied breathable gas RPD | |
| Respiratory protective devices \x96 Selection, use and maintenance \x96 Part 3: Fit-testing procedures | |
| Respiratory protective devices \x96 Vocabulary and graphical symbols | |
| Road vehicles - FlexRay communications system - Part 1: General information and use case definition | |
| Road vehicles - FlexRay communications system - Part 2: Data link layer specification | |
| Road vehicles - FlexRay communications system - Part 3: Data link layer conformance test specification | |
| Road vehicles - FlexRay communications system - Part 4: Electrical physical layer specification | |
| Road vehicles - FlexRay communications system - Part 5: Electrical physical layer conformance test specification | |
| Road vehicles - Video communication interface for cameras (VCIC) - Part 1: General information and use case definition | |
| Road vehicles - Video communication interface for cameras (VCIC) - Part 4: Implementation of communication requirements | |
| Road vehicles \x96 Controller area network (CAN) conformance test plan \x96 Part 1: Data link layer and physical signalling | |
| Road vehicles \x96 Controller area network (CAN) conformance test plan \x96 Part 2: High-speed medium access unit \x96 Conformance test plan | |
| Road vehicles \x96 Environmental conditions and testing for electrical and electronic equipment \x96 Part 1: General | |
| Road vehicles \x96 Environmental conditions and testing for electrical and electronic equipment \x96 Part 2: Electrical loads | |
| Road vehicles \x96 Environmental conditions and testing for electrical and electronic equipment \x96 Part 3: Mechanical loads | |
| Road vehicles \x96 Environmental conditions and testing for electrical and electronic equipment \x96 Part 4: Climatic loads | |
| Road vehicles \x96 Environmental conditions and testing for electrical and electronic equipment \x96 Part 5: Chemical loads | |
| Road vehicles \x96 Local Interconnect Network (LIN) \x96 Part 1: General information and use case definition | |
| Road vehicles \x96 Local Interconnect Network (LIN) \x96 Part 2: Transport protocol and network layer services | |
| Road vehicles \x96 Local Interconnect Network (LIN) \x96 Part 3: Protocol specification | |
| Road vehicles \x96 Local Interconnect Network (LIN) \x96 Part 4: Electrical physical layer (EPL) specification 12 V/24 V | |
| Road vehicles \x96 Local Interconnect Network (LIN) \x96 Part 6: Protocol conformance test specification | |
| Road vehicles \x96 Local Interconnect Network (LIN) \x96 Part 7: Electrical Physical Layer (EPL) conformance test specification | |
| Road vehicles \x96 Local Interconnect Network (LIN) \x96 Part 8: Electrical physical layer (EPL) specification: LIN over DC powerline (DC-LIN) | |
| Road vehicles \x96 Tachograph systems \x96 Part 1: Electrical connectors | |
| Road vehicles \x96 Tachograph systems \x96 Part 2: Electrical interface with recording unit | |
| Road vehicles \x96 Tachograph systems \x96 Part 3: Motion sensor communication interface | |
| Road vehicles \x96 Tachograph systems \x96 Part 4: CAN interface | |
| Road vehicles \x96 Tachograph systems \x96 Part 6: Diagnostics | |
| Road vehicles \x96 Tachograph systems \x96 Part 7: Parameters | |
| Road vehicles \x96 Video communication interface for cameras (VCIC) \x96 Part 3: Camera message dictionary | |
| Rolling bearings \x96 Method for calculating the effective static safety factor for universally loaded rolling bearings | |
| Rolling bearings \x96 Methods for calculating the modified reference rating life for universally loaded rolling bearings | |
| Room corner and open calorimeter - Guidance on sampling and measurement of effluent gas production using FTIR technique | |
| Rough-terrain trucks \x96 Visibility test methods and their verification \x96 Part 2: Slewing rough-terrain variable-reach trucks | |
| Safety of amusement rides and amusement devices \x96 Part 1: Design and manufacture | |
| Safety of amusement rides and amusement devices \x96 Part 2: Operation and use | |
| Safety of amusement rides and amusement devices \x96 Part 3: Requirements for inspection during design, manufacture, operation and use | |
| Sensory analysis \x96 Methodology \x96 Sequential analysis | |
| Ships and marine technology - Computer applications - General principles for the development and use of programmable electronic systems in marine applications | |
| Ships and marine technology - Drawings for fire protection - Indications of fire rating by divisions for ships and high-speed craft | |
| Ships and marine technology - Gyro-compasses for high-speed craft | |
| Ships and marine technology - Installation, inspection and maintenance of container securing devices for ships | |
| Ships and marine technology - Lifesaving and fire protection - Atmospheric oil mist detectors for ships | |
| Ships and marine technology - Marine electric window wipers | |
| Ships and marine technology - Marine environment protection - Oil booms - Part 1: Design requirements | |
| Ships and marine technology - Marine environment protection - Oil booms - Part 2: Strength and performance requirements | |
| Ships and marine technology - Metal valves for use in flanged pipe - Face-to-face and centre-to-face dimensions | |
| Ships and marine technology - Stud-link anchor chains | |
| Ships and marine technology \x96 Design and testing requirements of pneumatic quick-closing valves | |
| Ships and marine technology \x96 Jacking system appliances on self-elevating unit \x96 Acceptance tests | |
| Ships and marine technology \x96 Marine environment protection \x96 Arrangement and management of port waste reception facilities | |
| Ships and marine technology \x96 Marine environment protection \x96 Oil booms \x96 Part 3: End connectors | |
| Ships and marine technology \x96 Marine environment protection \x96 Oil booms \x96 Part 4: Auxiliary equipment | |
| Ships and marine technology \x96 Marine evacuation systems \x96 Determination of capacity | |
| Ships and marine technology \x96 Marine evacuation systems \x96 Load calculations and testing | |
| Ships and marine technology \x96 Night vision equipment for high-speed craft \x96 Operational and performance requirements, methods of testing and required test results | |
| Ships and marine technology \x96 Sea anchors for survival craft and rescue boats | |
| Ships and marine technology \x96 Shipboard plans for fire protection, life-saving appliances and means of escape \x96 Requirements specific to high speed crafts | |
| Ships and marine technology \x96 Shipboard plans for fire protection, life-saving appliances and means of escape | |
| Simultaneous interpreting \x96 Interpreters\x92 working environment \x96 Part 1: Requirements and recommendations for permanent booths | |
| Simultaneous interpreting \x96 Interpreters\x92 working environment \x96 Part 2: Requirements and recommendations for mobile booths | |
| Small craft \x96 Electric propulsion system | |
| Soil and waste characterization \x96 Temperature dependent differentiation of total carbon (TOC400, ROC, TIC900) | |
| Soil quality - Avoidance test for determining the quality of soils and effects of chemicals on behaviour - Part 1: Test with earthworms (Eisenia fetida and Eisenia andrei) | |
| Soil quality - Avoidance test for determining the quality of soils and effects of chemicals on behaviour - Part 2: Test with collembolans (Folsomia candida) | |
| Soil quality - Determination of abundance and activity of soil microflora using respiration curves | |
| Soil quality - Determination of hydraulic conductivity of saturated porous materials using a flexible wall permeameter | |
| Soil quality - Determination of hydraulic conductivity of saturated porous materials using a rigid wall permeameter | |
| Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method | |
| Soil quality - Determination of the effects of pollutants on soil flora - Seedling emergence, screening test with lettuce (Lactuca sativa L.) | |
| Soil quality - Digestion of nitric acid soluble fractions of elements | |
| Soil quality - Effects of pollutants on Enchytraeidae (Enchytraeus sp.) - Determination of effects on reproduction and survival | |
| Soil quality - Extraction of trace elements using dilute nitric acid | |
| Soil quality - Screening soils for isopropanol-extracta ble organic compounds by determining emulsification index by light attenuation | |
| Soil quality \x96 Assessment of human exposure from ingestion of soil and soil material \x96 Procedure for the estimation of the human bioaccessibility/bio availability of metals in soil | |
| Soil quality \x96 Environmental availability of non-polar organic compounds \x96 Determination of the potentially bioavailable fraction and the non-bioavailable fraction using a strong adsorbent or complexing agent | |
| Soil quality \x96 Estimation of abundance of selected microbial gene sequences by quantitative PCR from DNA directly extracted from soil | |
| Soil quality \x96 Guidance on the choice and evaluation of bioassays for ecotoxicological characterization of soils and soil materials | |
| Solid biofuels \x96 Determination of bulk density | |
| Solid biofuels \x96 Determination of mechanical durability of pellets and briquettes \x96 Part 1: Pellets | |
| Solid biofuels \x96 Determination of mechanical durability of pellets and briquettes \x96 Part 2: Briquettes | |
| Solid biofuels \x96 Determination of particle size distribution for uncompressed fuels \x96 Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above | |
| Solid biofuels \x96 Determination of particle size distribution for uncompressed fuels \x96 Part 2: Vibrating screen method using sieves with apertures of 3,15 mm and below | |
| Solid biofuels \x96 Fuel specifications and classes \x96 Part 1: General requirements | |
| Solid biofuels \x96 Fuel specifications and classes \x96 Part 2: Graded wood pellets | |
| Solid biofuels \x96 Fuel specifications and classes \x96 Part 3: Graded wood briquettes | |
| Solid biofuels \x96 Fuel specifications and classes \x96 Part 4: Graded wood chips | |
| Solid biofuels \x96 Fuel specifications and classes \x96 Part 5: Graded firewood | |
| Solid biofuels \x96 Fuel specifications and classes \x96 Part 6: Graded non-woody pellets | |
| Solid biofuels \x96 Fuel specifications and classes \x96 Part 7: Graded non-woody briquettes | |
| Solid biofuels \x96 Fuel specifications and classes \x96 Part 8: Graded thermally treated and densified biomass fuels for commercial and industrial use | |
| Solid biofuels \x96 Fuel specifications and classes \x96 Part 9: Graded hog fuel and wood chips for industrial use | |
| Solid biofuels \x96 Particle size distribution of disintegrated pellets | |
| Solid biofuels \x96 Vocabulary | |
| Space systems \x96 Measurements of thermo-optical properties of thermal control materials | |
| Stationary equipment for agriculture - Data communications network for livestock farming | |
| Stationary source emissions -- Sampling and determination of selenium compounds in flue gas | |
| Stationary source emissions \x96 Determination of the mass concentration of ammonia in flue gas \x96 Performance characteristics of automated measuring systems | |
| Statistical interpretation of data - Part 4: Detection and treatment of outliers | |
| Statistical interpretation of data - Part 6: Determination of statistical tolerance intervals | |
| Statistical interpretation of data - Part 7: Median - Estimation and confidence intervals | |
| Statistical interpretation of data - Part 8: Determination of a prediction interval | |
| Statistical methods - Six Sigma - Basic criteria underlying benchmarking for Six Sigma in organisations | |
| Structural adhesives \x96 Standard database of properties | |
| Supply chain applications of RFID - Freight containers | |
| Supply chain applications of RFID - Product packaging | |
| Supply chain applications of RFID - Product tagging | |
| Supply chain applications of RFID - Returnable transport items (RTIs) | |
| Supply chain applications of RFID - Transport units | |
| Surveillance of the activity concentrations of airborne radioactive substances in the workplace of nuclear facilities | |
| Systems for evacuation of plume generated by medical devices | |
| Technical product documentation \x96 Digital product definition data practices | |
| Textiles \x96 Determination of spirality after laundering \x96 Part 2: Woven and knitted fabrics | |
| Textiles \x96 Determination of spirality after laundering \x96 Part 3: Woven and knitted garments | |
| Textiles \x96 Quantitative analysis of cashmere, wool, other specialty animal fibres and their blends \x96 Part 1: Light microscopy method | |
| Textiles \x96 Test method for assessing the matting appearance of napped fabrics after cleansing | |
| Thermal insulating products for building applications \x96 Determination of freeze-thaw resistance | |
| Thermal insulating products for building applications \x96 Determination of long-term water absorption by diffusion | |
| Thermal insulating products for building applications \x96 Determination of long-term water absorption by immersion | |
| Thermal insulating products for building equipment and industrial installations \x96 Determination of maximum service temperature for preformed pipe insulation | |
| Thermal insulating products for building equipment and industrial installations \x96 Determination of the apparent density of preformed pipe insulation | |
| Thermal insulation products \x96 Exterior insulation and finish systems (EIFS) \x96 Part 2: Installation | |
| Thermal insulation products \x96 Exterior insulation and finish systems (EIFS) \x96 Part 3: Design requirements | |
| Thermal insulation products \x96 Exterior insulation finish systems \x96 Part 1: Materials | |
| Thermal insulation products \x96 Sheep wool mat and board \x96 Specification | |
| Thermal insulation products \x96 Vacuum insulation panels (VIPs) \x96 Specification | |
| Thermal performance in the built environment - Determination of air flow rate in building applications by field measuring methods | |
| Thermoplastic elastomers \x96 Nomenclature and abbreviated terms | |
| Timber structures \x96 Cross laminated timber \x96 Part 1: Component performance, production requirements and certification scheme | |
| Tobacco and tobacco products \x96 Determination of water content \x96 Gas-chromatographic method | |
| Tourism and related services - Thalassotherapy - Service requirements | |
| Tourism and related services - Tourist services for public use provided by Natural Protected Areas Authorities - Requirements | |
| Tourism and related services \x96 Restaurants and catering \x96 Vocabulary | |
| Tourism and related services \x96 Wellness spa \x96 Service requirements | |
| Traceability of crustacean products - Specifications on the information to be recorded in farmed crustacean distribution chains | |
| Traceability of rare earths in the supply chain from separated products to permanent magnets | |
| Tracheobronchial tubes - Sizing and marking | |
| Underwater acoustics \x96 Quantities and procedures for description and measurement of underwater sound from ships \x96 Part 1: Requirements for precision measurements in deep water used for comparison purposes | |
| Underwater acoustics \x96 Quantities and procedures for description and measurement of underwater sound from ships \x96 Part 2: Determination of source levels from deep water measurements | |
| Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 11: Determination of content of respirable particles | |
| Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 2: Determination of amount of residual monomers | |
| Urine-absorbing aids for incontinence \x96 Polyacrylate superabsorbent powders \x96 Part 9: Test method for gravimetric determination of flow rate and bulk density | |
| Urine-absorbing aids for incontinence \x96 Test methods for characterizing polymer-based absorbent materials \x96 Part 10: Determination of extractable polymer content by potentiometric titration | |
| Urine-absorbing aids for incontinence \x96 Test methods for characterizing polymer-based absorbent materials \x96 Part 1: Determination of pH | |
| Urine-absorbing aids for incontinence \x96 Test methods for characterizing polymer-based absorbent materials \x96 Part 3: Determination of particle size distribution by sieve fractionation | |
| Urine-absorbing aids for incontinence \x96 Test methods for characterizing polymer-based absorbent materials \x96 Part 4: Determination of moisture content by mass loss upon heating | |
| Urine-absorbing aids for incontinence \x96 Test methods for characterizing polymer-based absorbent materials \x96 Part 5: Gravimetric determination of free swell capacity in saline solution | |
| Urine-absorbing aids for incontinence \x96 Test methods for characterizing polymer-based absorbent materials \x96 Part 6: Gravimetric determination of fluid retention capacity in saline solution after centrifugation | |
| Urine-absorbing aids for incontinence \x96 Test methods for characterizing polymer-based absorbent materials \x96 Part 7: Gravimetric determination of absorption under pressure | |
| Urine-absorbing aids for incontinence \x96 Test methods for characterizing polymer-based absorbent materials \x96 Part 8: Gravimetric determination of flowrate | |
| Urine-absorbing aids for incontinence \x96 Test methods for characterizing polymer-based absorbent materials \x96 Part 9: Gravimetric determination of density | |
| Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General guidelines | |
| Water quality - Calanoid copepod early-life stage test with Acartia tonsa | |
| Water quality - Detection and enumeration of thermotolerant Campylobacter species | |
| Water quality - Determination of arsenic and antimony - Part 1: Method using hydride generation atomic fluorescence spectrometry (HG-AFS) | |
| Water quality - Determination of arsenic and antimony - Part 2: Method using hydride generation atomic absorption spectrometry (HG-AAS) | |
| Water quality - Determination of available free cyanide (pH 6) using flow injection analysis (FIA), gas-diffusion and amperometric detection | |
| Water quality - Determination of dioxin-like polychlorinated biphenyls - Method using gas chromatography/mass spectrometry | |
| Water quality - Determination of dissolved oxygen - Optical sensor method | |
| Water quality - Determination of tetra- to octa-chlorinated dioxins and furans - Method using isotope dilution HRGC/HRMS | |
| Water quality - Determination of the toxic effect of sediment on the growth behaviour of Myriophyllum aquaticum | |
| Water quality - Determination of toxicity of fresh water sediments using Hyalella azteca | |
| Water quality - Guidance for determination of biodegradability in the marine environment | |
| Water quality - Selection and application of ready-to-use test kit methods in water analysis | |
| Water quality \x96 Detection and enumeration of Pseudomonas aeruginosa \x96 Part 2: Most probable number method | |
| Water quality \x96 Determination of the toxicity of water samples on the embryo-larval development of Japanese oyster (Crassostrea gigas) and mussel (Mytilus edulis or Mytilus galloprovincialis) | |
| Wear of implant materials - Polymer and metal wear particles - Isolation and characterization | |
| Welding \x96 Micro joining of 2nd generation high temperature superconductors \x96 Part 1: General requirements for the procedure (ISO 17279-1:2018) | |
| Welding \x96 Micro joining of 2nd generation high temperature superconductors \x96 Part 2: Qualification for welding and testing personnel | |
| Welding \x96 Micro joining of second generation high temperature superconductors \x96 Part 3: Test methods for joints | |
| Welding \x96 Quality requirements for heat treatment in connection with welding and allied processes | |
| Welding consumables \x96 Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels \x96 Classification | |
| Welding consumables \x96 Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels \x96 Classification | |
| Wheat flour and durum wheat semolina \x96 Determination of the colour by reflectance diffused colorimetry | |
| Wheelchair seating - Part 1: Vocabulary, reference axis convention and measures for body segments, posture and postural support surfaces | |
| Wheelchair seating - Part 3: Determination of static, impact and repetitive load strengths for postural support devices | |
| Wheelchair seating - Part 4: Seating systems for use in motor vehicles | |
| Wheelchair seating - Part 6: Simulated use and determination of the changes in properties of seat cushions | |
| Wheelchair seating \x96 Part 10: Resistance to ignition of postural support devices \x96 Requirements and test method \x96 Amendment 1: Amended with additional Annexes and test method | |
| Wheelchair seating \x96 Part 11: Determination of dissipation characteristics of sensible perspiration into seat cushions | |
| Wheelchair seating \x96 Part 12: Envelopment and immersion characterization of seat cushions using a dual semispherical indenter \x96 Amendment 1 | |
| Wheelchair seating \x96 Part 12: Envelopment and immersion characterization of seat cushions using a dual semispherical indenter | |
| Wheelchair seating \x96 Part 13: Determination of the lateral stability property of a seat cushion \x96 Amendment 1 | |
| Wheelchair seating \x96 Part 13: Determination of the lateral stability property of a seat cushion | |
| Wheelchair seating \x96 Part 2: Determination of physical and mechanical characteristics of devices intended to manage tissue integrity \x96 Seat cushions | |
| Wheelchair seating \x96 Part 2: Determination of physical and mechanical characteristics of seat cushions intended to manage tissue integrity \x96 Amendment 1: Updates and addition of new Annex covering alternatively... | |
| Wheelchairs \x96 Resistance to ignition of non-integrated seat and back support cushions \x96 Part 10: Requirements and test methods | |
| Workplace air - Determination of hexavalent chromium in airborne particulate matter - Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide | |
| Workplace air - Determination of mercury and inorganic mercury compounds - Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry |
| << Prev | Next >> |