Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
100
150
200
250
300
350
390
400
410
420
430
440
441
442
443
444
445
446
447
448
449
450
451
452
453
460
470
480
490
500
510
550
600
650
700
750
800
1000
1500
1620
| Product Name | Notes |
|---|---|
| Acoustics Description and measurement of environmental noise Part 2: Acquisition of data pertinent to land use | |
| Acoustics Description and measurement of environmental noise Part 3: Application to noise limits | |
| Acoustics Description, measurement and assessment of environmental noise Part 1: Basic quantities and assessment procedures | |
| Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets | |
| Anaesthetic and respiratory equipment - Conical connectors - Part 2: Screw-threaded weight-bearing connectors | |
| Anaesthetic and respiratory equipment - Nebulizing systems and components | |
| Anaesthetic and respiratory equipment - Oropharyngeal airways | |
| Anaesthetic and respiratory equipment - Supralaryngeal airways and connectors | |
| Anaesthetic and respiratory equipment - Tracheal tubes and connectors | |
| Anaesthetic and respiratory equipment - Tracheostomy tubes - Part 1: Tubes and connectors for use in adults | |
| Anaesthetic and respiratory equipment - Tracheostomy tubes - Part 3: Paediatric tracheostomy tubes | |
| Anaesthetic and respiratory equipment - Tracheostomy tubes and connectors | |
| Anaesthetic and respiratory equipment \x97 User-applied labels for syringes containing drugs used during anaesthesia \x97 Colours, design and performance | |
| Anaesthetic reservoir bags | |
| Anaesthetic vaporizers - Agent-specific filling systems | |
| Appareils d\x92aspiration m\xe9dicale \x97 Partie 1 : Appareils \xe9lectriques d\x92aspiration | |
| Billet-Steel Bars for Concrete Reinforcement | |
| Biocombustibles solides - M\xe9thode de d\xe9termination de la teneur en mati\xe8res volatiles | |
| Biocombustibles solides \x97 M\xe9thode de d\xe9termination de la teneur en cendres | |
| Breathing tubes intended for use with anaesthetic apparatus and ventilators | |
| CAN/CSA-ISO 11137-3:17 Sterilization of health care products - Radiation - Part 3: Guidance on dosimetric aspects of development, validation and routine control | |
| Cardiovascular implants and extracorporeal systems - Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators AMENDMENT 1: Revision to Figure 2 - Main fitting dimensions of dialysis fluid inlet and outlet ports | |
| Cardiovascular implants and extracorporeal systems \x97 Extracorporeal blood circuit for haemodialysers, haemodiafilters and haemofilters | |
| Cardiovascular implants and extracorporeal systems \x97 Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators | |
| Concentr\xe9s pour h\xe9modialyse et th\xe9rapies apparent\xe9es | |
| Concentrates for haemodialysis and related therapies | |
| Dependability Management - Part 3: Application Guide - Section 9: Risk Analysis of Technological Systems | |
| Dispositifs m\xe9dicaux - Application de la gestion des risques aux dispositifs m\xe9dicaux | |
| Dispositifs m\xe9dicaux - Syst\xe8mes de management de la qualit\xe9 - Exigences \xe0 des fins r\xe9glementaires | |
| Dispositifs m\xe9dicaux \x97 Syst\xe8mes de management de la qualit\xe9 \x97 Exigences \xe0 des fins r\xe9glementaires | |
| Dispositifs Medicaux - Application De La Gestion Des Risques Aux Dispositifs Medicaux | |
| Eau pour h\xe9modialyse et th\xe9rapies apparent\xe9es | |
| Electromagnetic compatibility (EMC) - Part 3-5: Limits - Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A | |
| Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications | |
| Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz | |
| Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test | |
| Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test | |
| Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods | |
| Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test | |
| Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields | |
| Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto | |
| Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test | |
| Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments | |
| Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for equipment used in power station and substation environment | |
| Electromagnetic compatibility (EMC) \x96 Part 4-5: Testing and measurement techniques \x96 Surge immunity test | |
| Energy audits - Requirements with guidance for use | |
| Energy management systems - Guidance for the implementation, maintenance and improvement of an energy management system | |
| Energy management systems - Measurement and verification of energy performance of organizations - General principles and guidance | |
| Enviromental Labels and Declarations - Type I Enviromental Labelling - Principles and Procedures | |
| Environmental Labels and Declarations - General Principles | |
| Environmental Labels and Declarations - Self-Declared Environmental Claims (Type II Environmental Labelling) | |
| Environmental labels and declarations \x97 General principles | |
| Environmental labels and declarations \x97 Type III environmental declarations \x97 Principles and procedures | |
| Environmental management - Environmental assessment of sites and organizations (EASO) | |
| Environmental Management - Environmental Performance Evaluation - Guidelines | |
| Environmental Management - Life Cycle Assessment - Principles and Framework | |
| Environmental management - Life cycle assessment - Requirements and guidelines | |
| Environmental management Environmental assessment of sites and organizations (EASO) | |
| Environmental management Life cycle assessment Requirements and guidelines | |
| Environmental management systems - General guidelines on principles, systems and support techniques | |
| Environmental Management Systems - General Guidelines on Principles, Systems and Supporting Techniques | |
| Environmental Management Systems - Specification with Guidance for Use | |
| Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 1: General Introduction | |
| Ergonomic requirements for office work with visual display terminals (VDTs) - Part 2: Guidance on task requirements | |
| Ergonomic requirements for office work with visual display terminals (VDTs) - Part 3: Visual display requirements AMENDMENT 1 | |
| Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 3: Visual Display Requirements | |
| Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 4: Keyboard Requirements TECHNICAL CORRIGENDUM 1 | |
| Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 4: Keyboard Requirements | |
| Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 5: Workstation Layout and Postural Requirements | |
| Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 7: Requirements for Display with Reflections | |
| Ergonomic requirements for office work with visual display terminals (VDTs) - Part 8 Requirements for displayed colours | |
| Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 8: Requirements for Displayed Colours | |
| Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 9: Requirements for Non-Keyboard Input Devices | |
| Ergonomic requirements for office work with visual display terminals (VDTs) \x97 Part 3: Visual display requirements AMENDMENT 1 | |
| Ergonomics of human-system interaction - Part 20: Accessibility guidelines for information/communic ation technology (ICT) equipment and services | |
| Ergonomie de l'interaction hommesyst\xe8me - Partie 171: Lignes directrices relatives \xe0 l'accessibilit\xe9 aux logiciels | |
| Event sustainability management systems - Requirements with guidance for use | |
| Galvanisation A Chaud Des Objets De Forme Irreguliere | |
| Gas mixers for medical use - Stand-alone gas mixers | |
| Gaz \xe0 effet de serre - Partie 1: Sp\xe9cifications et lignes directrices, au niveau des organismes, pour la quantification et la d\xe9claration des \xe9missions et des suppression des gaz \xe0... | |
| Gaz \xe0 effet de serre - Partie 2: Sp\xe9cifications et lignes directrices, au niveau des projets, pour la quantification, la surveillance et la d\xe9claration des r\xe9ductions d'\xe9missions ou d'accroissements de... | |
| Gaz \xe0 effet de serre - Partie 3: Sp\xe9cifications et lignes directrices pour la validation et la v\xe9rification des d\xe9clarations des gaz \xe0 effet de serre | |
| Gaz \xe0 effet de serre Partie 2: Sp\xe9cifications et lignes directrices, au niveau des projets, pour la quantification, la surveillance et la d\xe9claration des r\xe9ductions d'\xe9missions ou d'accroissements de suppressions... | |
| General Requirements for Rolled or Welded Structural Quality Steel | |
| Gestion des performances durables d\x92un organisme - Approche de management par la qualit\xe9 | |
| Greenhouse gases - Competence requirements for greenhouse gas validation teams and verification teams | |
| Greenhouse gases - Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements | |
| Greenhouse gases \x97 Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals | |
| Greenhouse gases \x97 Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions | |
| Guidance on Social Responsibility | |
| Guidelines for auditing management systems | |
| Guidelines for the Development and Use of Medical Electrical Equipment Educational Materials | |
| Health informatics Integration of a reference terminology model for nursing | |
| Identification cards - Contactless integrated circuit(s) cards - Close-coupled cards - Part 1: Physical characteristics | |
| Identification Cards - Contactless Integrated Circuit(s) Cards - Part 2: Dimensions and Location of Coupling Areas | |
| Identification cards - Test methods - Part 1: General characteristics AMENDMENT 1 | |
| Identification cards - Test methods - Part 1: General characteristics | |
| Identification cards - Test methods - Part 2: Cards with magnetic stripes | |
| Identification cards - Test methods - Part 5: Optical memory cards | |
| Identification cards - Test methods - Part 6: Proximity cards - Amendment 7: Test methods for ePassport | |
| Identification cards - Test methods - Part 6: Proximity cards AMENDMENT 1: Additional PICC classes | |
| Identification cards - Test methods - Part 6: Proximity cards AMENDMENT 2: Test methods for electromagnetic disturbance | |
| Identification cards - Test methods - Part 6: Proximity cards AMENDMENT 3: Exchange of additional parameters, block numbering, unmatched AFI and TR2 | |
| Identification cards - Test methods - Part 6: Proximity cards AMENDMENT 3: PICC loading effect | |
| Identification cards - Test methods - Part 6: Proximity cards Amendment 4: Additional test methods for PCD RF interface and PICC alternating field exposure | |
| Identification cards - Test methods - Part 6: Proximity cards AMENDMENT 4: Bit rates of fc/8, fc/4 and fc/2 and frame size from 512 to 4096 bytes | |
| Identification cards - Test methods - Part 6: Proximity cards Amendment 5: Bit rates of fc/64, fc/32 and fc/16 | |
| Identification cards - Test methods - Part 6: Proximity cards | |
| Identification cards \x97 Test methods \x97 Part 1: General characteristics | |
| Identification cards \x97 Test methods \x97 Part 2: Cards with magnetic stripes | |
| Identification cards \x97 Test methods \x97 Part 3: Integrated circuit cards with contacts and related interface devices | |
| Identification cards \x97 Test methods \x97 Part 6: Proximity cards Amendment 1: Protocol test methods for proximity cards | |
| Identification cards \x97 Test methods \x97 Part 6: Proximity cards AMENDMENT 3: Protocol test methods for proximity coupling devices | |
| Identification cards \x97 Test methods \x97 Part 6: Proximity cards | |
| Identification cards \x97 Test methods \x97 Part 7: Vicinity cards | |
| Identification cards Test methods Part 6: Proximity cards Amendment 2: Improved RF Test Methods | |
| Identification cards Test methods Part 6: Proximity cards | |
| Implants for Surgery - Metal Bone Screws with Hexagonal Drive Connection, Spherical Under-Surface of Head, Asymmetrical Thread - Dimensions | |
| Implants for Surgery - Metallic Materials - Part 3: Wrought Titanium 6-Aluminium 4-Vanadium Alloy | |
| Implants for Surgery - Metallic Materials - Part 4: Cobalt-Chromium-Moly bdenum Casting Alloy | |
| Implants for Surgery - Metallic Materials - Part 6: Wrought Cobalt-Nickel-Chromi um-Molybdenum Alloy | |
| In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus | |
| In vitro diagnostic test systems Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus | |
| Industrial communication networks - Network and system security - Part 1-1: Terminology, concepts and models | |
| Industrial communication networks - Network and system security - Part 2-1: Establishing an industrial automation and control system security program | |
| Industrial communication networks - Network and system security - Part 3-1: Security technologies for industrial automation and control systems | |
| Information Processing - Data Encipherment - Physical Layer Interoperability Requirements | |
| Information Technology - Data Communication - 15-Pole DTE/DCE Interface Connector and Contact Number Assignments | |
| Information Technology - Font Information Interchange - procedures for Registration of Font-Related Identifiers | |
| Information Technology - Information Resource Dictionary System (IRDS) Framework | |
| Information technology - Information Resource Dictionary System (IRDS) Services Interface AMENDMENT 1: C language binding | |
| Information technology - Information Resource Dictionary System (IRDS) Services Interface AMENDMENT 2: Ada language binding | |
| Information technology - Information Resource Dictionary System (IRDS) Services Interface AMENDMENT 3: CORBA IDL binding | |
| Information technology - Information Resource Dictionary System (IRDS) Services Interface AMENDMENT 4: RPC IDL binding | |
| Information Technology - Information Resource Dictionary System (IRDS) Services Interface | |
| Information technology - JPEG 2000 image coding system: Motion JPEG 2000 | |
| Information technology - Message Handling Systems (MHS) Part 1: System and service overview | |
| Information technology - Message Handling Systems (MHS): Interpersonal messaging system | |
| Information Technology - Message Handling Systems (MHS): Message Store: Abstract Service Definition | |
| Information technology - Message Handling Systems (MHS): Message transfer system - Abstract service definition and procedures | |
| Information technology - Message Handling Systems (MHS): Overall Architecture | |
| Information Technology - Message Handling Systems (MHS): Protocol specifications | |
| Information Technology - Open Systems Interconnection - Basic Reference Model - Conventions for the Definition of OSI Services | |
| Information Technology - Open Systems Interconnection - Connectionless Protocol for the Association Control Service Element: Protocol Implementation Conformance Statement (PICS) Proforma | |
| Information technology - Open Systems Interconnection - Distributed Transaction Processing - Part 1: OSI TP Model | |
| Information technology - Open Systems Interconnection - Distributed Transaction Processing - Part 2: OSI TP Service | |
| Information Technology - Open Systems Interconnection - Distributed Transaction Processing - Part 3: Protocol Specification | |
| Information technology - Open Systems Interconnection - Distributed Transaction Processing - Part 6: Unstructured Data Transfer | |
| Information Technology - Open Systems Interconnection - Distributed Transaction Processing: Protocol Implementation Conformance Statement (PICS) Proforma | |
| Information Technology - Open Systems Interconnection - Security Frameworks for Open Systems: Access Control Framework | |
| Information Technology - Open Systems Interconnection - Security Frameworks for Open Systems: Authentication Framework | |
| Information technology - Open Systems Interconnection - Security frameworks for open systems: Confidentiality framework | |
| Information technology - Open Systems Interconnection - Security frameworks for open systems: Integrity framework | |
| Information Technology - Open Systems Interconnection - Security Frameworks for Open Systems: Non-Repudiation Framework | |
| Information Technology - Open Systems Interconnection - Security Frameworks for Open Systems: Overview | |
| Information Technology - Open Systems Interconnection - Security Frameworks for Open Systems: Security Audit and Alarms Framework | |
| Information Technology - Open Systems Interconnection - Structure of Management Information: Generic Management Information | |
| Information technology - Open Systems Interconnection - Structure of management information: Managed objects for supporting upper layers | |
| Information Technology - Open Systems Interconnection - Structure of Management Information: Requirements and Guidelines for Implementation Conformance Statement Proformas Associated with OSI Management | |
| Information technology - Open Systems Interconnection - Structure of management information: Systems management application layer managed objects | |
| Information technology - Open Systems Interconnection - Systems Management: Alarm reporting function AMENDMENT 1 : Implementation conformance statement proformas | |
| Information Technology - Open Systems Interconnection - Systems Management: Alarm Reporting Function | |
| Information Technology - Open Systems Interconnection - Systems Management: Attributes for Representing Relationships AMENDMENT 1 : Implementation conformance statement proformas | |
| Information Technology - Open Systems Interconnection - Systems Management: Attributes for Representing Relationships AMENDMENT 1: Implementation Conformance statement proformas | |
| Information Technology - Open Systems Interconnection - Systems Management: Attributes for Representing Relationships | |
| information technology - Open Systems Interconnection - Systems Management: Confidence and diagnostic test categories | |
| Information technology - Open Systems Interconnection - Systems Management: Event Report Management Function AMENDMENT 1: Implementation Conformance statement proformas | |
| Information technology - Open Systems Interconnection - Systems Management: Event Report Management Function AMENDMENT I : Implementation conformance statement proformas | |
| Information Technology - Open Systems Interconnection - Systems Management: Event Report Management Function | |
| Information Technology - Open Systems Interconnection - Systems Management: Log Control Function AMENDMENT 1 : Implementation conformance statement proformas | |
| Information Technology - Open Systems Interconnection - Systems Management: Log Control Function | |
| Information Technology - Open Systems Interconnection - Systems Management: Management Knowledge Management Function AMENDMENT 1: Extension for General Relationship Model | |
| Information Technology - Open Systems Interconnection - Systems Management: Management Knowledge Management Function | |
| Information technology - Open Systems Interconnection - Systems Management: Metric objects and attributes AMENDMENT 1: Implementation conformance statement proformas | |
| Information Technology - Open Systems Interconnection - Systems Management: Metric Objects and Attributes | |
| Information technology - Open Systems Interconnection - Systems Management: Object Management Function AMENDMENT 1 : Implementation conformance statement proformas | |
| Information Technology - Open Systems Interconnection - Systems Management: Object Management Function | |
| Information Technology - Open Systems Interconnection - Systems Management: Objects and Attributes for Access Control | |
| Information technology - Open Systems Interconnection - Systems Management: Response time monitoring function | |
| Information technology - Open Systems Interconnection - Systems management: Scheduling function | |
| Information Technology - Open Systems Interconnection - Systems Management: Security Alarm Reporting Function AMENDMENT 1 : Implementation conformance statement proformas | |
| Information Technology - Open Systems Interconnection - Systems Management: Security Alarm Reporting Function AMENDMENT 1: Implementation conformance statement proformas | |
| Information Technology - Open Systems Interconnection - Systems Management: Security Alarm Reporting Function AMENDMENT I : Implementation conformance statement proformas | |
| Information Technology - Open Systems Interconnection - Systems Management: Security Alarm Reporting Function | |
| Information Technology - Open Systems Interconnection - Systems Management: Security Audit Trail Function | |
| Information technology - Open Systems Interconnection - Systems Management: State Management Function AMENDMENT 1 : Implementation conformance statement proformas | |
| Information technology - Open Systems Interconnection - Systems Management: State Management Function AMENDMENT 2: Amendment to support lifecycle state | |
| Information technology - Open Systems Interconnection - Systems Management: State Management Function | |
| Information technology - Open Systems Interconnection - Systems Management: Summarization Function AMENDMENT 1: Implementation conformance statement proformas | |
| Information Technology - Open Systems Interconnection - Systems Management: Summarization Function | |
| Information Technology - Open Systems Interconnection - Systems Management: Test Management Function | |
| Information technology - Open Systems Interconnection - Systems Management: Usage metering function for accounting purposes AMENDMENT 1: Implementation conformance statement proformas | |
| Information Technology - Open Systems Interconnection - Systems Management: Usage Metering Function for Accounting Purposes | |
| Information Technology - Processing Languages - Document Style Semantics and Specification Language (DSSSL) AMENDMENT 1: Extensions to DSSSL | |
| Information technology - Processing languages - Document Style Semantics and Specification Language (DSSSL) AMENDMENT 2: Extensions to multilingual and complicated document styles | |
| Information Technology - Processing Languages - Document Style Semantics and Specification Language (DSSSL) TECHNICAL CORRIGENDUM 1 | |
| Information Technology - Processing Languages - Document Style Semantics and Specification Language (DSSSL) | |
| Information Technology - Processing Languages - Standard Page Description Language (SPDL) | |
| Information Technology - Programming Languages - Extended Pascal | |
| Information Technology - Programming Languages - Full BASIC AMENDMENT 1: Modules and single character input enhancement | |
| Information Technology - Programming Languages - Full BASIC | |
| Information Technology - Security Techniques - Hash-Functions - Part 1: General | |
| Information Technology - Security Techniques - Hash-Functions - Part 2: Hash-Functions Using an n-Bit Block Cipher | |
| Information technology - Security techniques - Hash-functions - Part 3: Dedicated hash-functions AMENDMENT 1: Dedicated Hash-Function 8 (SHA-224) | |
| Information Technology - Security Techniques - Hash-Functions - Part 3: Dedicated Hash-Functions | |
| Information Technology - Security Techniques - Modes of Operation for an n-Bit Block Cipher | |
| Information technology - Telecommunications and information exchange between systems - Elements of management information related to OS1 Data Link Layer standards AMENDMENT 2: Implementation conformance statement proformas | |
| Information technology - Telecommunications and information exchange between systems - Elements of management information related to OS1 Data Link Layer standards | |
| Information technology - Telecommunications and information exchange between Systems - Elements of management information related to OSI Data Link Layer Standards AMENDMENT 1: Addition of DCE conditions and new attributes... | |
| Information Technology - Telecommunications and Information Exchange between Systems - Elements of Management Information Related to OSI Data Link Layer Standards Amendment 2: Implementation conformance statement proformas | |
| Information Technology - Telecommunications and Information Exchange between Systems - Elements of Management Information Related to OSI Data Link Layer Standards AMENDMENT 3: Addition of new counter attributes | |
| Information Technology - Telecommunications and Information Exchange between Systems - Elements of Management Information Related to OSI Data Link Layer Standards | |
| Information Technology - Telecommunications and Information Exchange between Systems - End System Routeing Information Exchange Protocol for Use in Conjunction with ISO/IEC 8878 | |
| Information Technology - Telecommunications and Information Exchange between Systems - Interface Connector and Contact Assignments for ISDN Primary Rate Access Connector Located at Reference Points S and T | |
| Information Technology - Text and Office Systems - Document Printing Application (DPA) - Part 1: Abstract Service Definition and Procedures | |
| Information Technology - Text and Office Systems - Document Printing Application (DPA) - Part 2: Protocol Specification | |
| Information technology - Text and office systems - Document Printing Application (DPA) - Part 3: Management abstract service definitions and procedures | |
| Information Technology - Text Communication - Message-Oriented Text Interchange Systems (MOTIS) - Part 1: System and Service Overview | |
| Information Technology - Text Communication - Message-Oriented Text Interchange Systems (MOTIS) - Part 2: Overall Architecture | |
| Information Technology - Text Communication - Message-Oriented Text Interchange Systems (MOTIS) - Part 6: Protocol Specifications | |
| Information technology - Universal Coded Character Set (UCS) AMENDMENT 1: Cherokee supplement and other characters | |
| Information technology - Universal Coded Character Set (UCS) AMENDMENT 2: Bhaiksuki, Marchen, Tangut and other characters | |
| Information technology - Universal Coded Character Set (UCS) | |
| Information technology \x96 Home electronic system (HES) interfaces Part 1: Universal Interface (UI) Class 1 | |
| Information technology \x97 Information Resource Dictionary System (IRDS) Services Interface AMENDMENT 2: Ada language binding | |
| Information technology \x97 Open Systems Interconnection \x97 Systems Management: Metric objects and attributes AMENDMENT 1: Implementation conformance statement proformas | |
| Information technology \x97 Open Systems Interconnection \x97 Systems Management: Usage metering function for accounting purposes AMENDMENT 1: Implementation conformance statement proformas | |
| Information technology \x97 Processing languages \x97 Document Style Semantics and Specification Language (DSSSL) AMENDMENT 2: Extensions to multilingual and complicated document styles | |
| Information technology \x97 Security techniques \x97 Hash-functions \x97 Part 1: General AMENDMENT 1: Padding methods for sponge functions | |
| Information technology \x97 Security techniques \x97 Hash-functions \x97 Part 2: Hash-functions using an n-bit block cipher TECHNICAL CORRIGENDUM 2 | |
| Information technology \x97 Security techniques \x97 Hash-functions \x97 Part 2: Hash-functions using an n-bit block cipher | |
| Information technology \x97 Security techniques \x97 Modes of operation for an n-bit block cipher | |
| Information technology Message Handling Systems (MHS) Part 1: System and service overview | |
| Information technology Message Handling Systems (MHS): Message transfer system Abstract service definition and procedures | |
| Information technology Message Handling Systems (MHS): Overall Architecture | |
| Information technology Telecommunications and information exchange between systems Intermediate System to Intermediate System intra-domain routeing information exchange protocol for use in conjunction with the protocol for providing the connectionless-mode netwo... | |
| Information technology-Programmi ng languages-Part 1: Modula-2, Base Language | |
| Informatique de sant\xe9 Messages et communication Acc\xe8s au web pour les objets persistants DICOM | |
| Installation Code for Solar Domestic Hot Water Systems | |
| Installation of packaged solar domestic hot water systems | |
| Lifts (elevators), escalators and moving walks \x97 Risk assessment and reduction methodology | |
| Lignes directrices pour l\x92audit des syst\xe8mes de management | |
| Lignes directrices pour l\xb4audit des syst\xe8mes de management de la qualit\xe9 et/ou de management environnemental | |
| Management du risque - Principes et lignes directrices | |
| Management environnemental - \xc9valuation de la performance environnementale - Lignes directrices | |
| Management environnemental - Analyse du cycle de vie - Principes et cadre | |
| Mat\xe9riel d\x92anesth\xe9sie et de r\xe9animation respiratoire - Sondes trach\xe9ales et raccords | |
| Measurement management systems - Requirements for measurement processes and measuring equipment | |
| Measurement management systems Requirements for measurement processes and measuring equipment | |
| Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 1: General requirements | |
| Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 2: Practical guidance for measurement at the workplace | |
| Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand | |
| Medical Devices - Application of Risk Management to Medical Devices | |
| Medical devices - Application of usability engineering to medical devices | |
| Medical devices - Part 1: Application of usability engineering to medical devices | |
| Medical suction equipment - Part 2: Manually powered suction equipment | |
| Medical suction equipment - Part 3: Suction equipment powered from a vacuum or positive pressure gas source | |
| Metric Dimensions for Structural Steel Shapes and Hollow Structural Sections | |
| Modification 1:2019 (IDT) \xe0 CAN/CSA-ISO 10079-1:16 Appareils d\x92aspiration m\xe9dicale \x97 Partie 1 : Appareils \xe9lectriques d\x92aspiration AMENDEMENT 1 : Modifications des exigences de fonctionnement \xe0 des valeurs extr\xeames de temp\xe9rature... | |
| Non-invasive sphygmomanometers - Part 2: Clinical investigation of automated measurement type | |
| Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems | |
| Packaging for terminally sterilized medical devices \x97 Part 2: Validation requirements for forming, sealing and assembly processes | |
| Petroleum and natural gas industries - Fixed concrete offshore structures | |
| Petroleum and natural gas industries - General requirements for offshore structures | |
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 1: Metocean design and operating considerations | |
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 3: Topsides structure | |
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 4: Geotechnical and foundation design considerations | |
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units | |
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 8: Marine soil investigations | |
| Petroleum and natural gas industries \x97 Arctic offshore structures | |
| Petroleum and natural gas industries \x97 Fixed concrete offshore structures | |
| Petroleum and natural gas industries \x97 Floating offshore structures \x97 Part 1: Monohulls, semi-submersibles and spars | |
| Petroleum and natural gas industries \x97 Specific requirements for offshore structures \x97 Part 3: Topsides structure | |
| Petroleum and natural gas industries \x97 Specific requirements for offshore structures \x97 Part 5: Weight control during engineering and construction | |
| Petroleum and natural gas industries \x97 Specific requirements for offshore structures \x97 Part 6: Marine operations | |
| Petroleum and natural gas industries \x97 Specific requirements for offshore structures \x97 Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units | |
| Petroleum and natural gas industries General requirements for offshore structures | |
| Petroleum and natural gas industries Specific requirements for offshore structures Part 1: Metocean design and operating considerations | |
| Petroleum and natural gas industries Specific requirements for offshore structures Part 4: Geotechnical and foundation design considerations | |
| Pratique recommand\xe9e pour l\x92installation des syst\xe8mes de conversion d\x92\xe9nergie \xe9olienne | |
| Printing specifications for optical character recognition | |
| Processing of health care products - Information to be provided by the medical device manufacturer for the processing of medical devices | |
| Produits consommables pour le soudage \x97 Fils-\xe9lectrodes et m\xe9taux d\x92apport d\xe9pos\xe9s en soudage \xe0 l\x92arc sous protection gazeuse des aciers non alli\xe9s et \xe0 grains fins \x97 Classification | |
| Programming languages - APL | |
| Quality management - Customer satisfaction - Guidelines for business-to-consumer electronic commerce transactions | |
| Quality management - Customer satisfaction - Guidelines for codes of conduct for organizations | |
| Quality management - Customer satisfaction - Guidelines for complaints handling in organizations | |
| Quality management - Customer satisfaction - Guidelines for dispute resolution external to organizations | |
| Quality Management - Guidelines for Quality Plans | |
| Quality management - Guidelines for realizing financial and economic benefits | |
| Quality Management - Guidelines for Training | |
| Quality management \x97 Customer satisfaction \x97 Guidelines for dispute resolution external to organizations | |
| Quality Management and Quality Assurance Standards - Part 3: Guidelines for the Application of ISO 9001:1994 to the Development, Supply, Installation and Maintenance of Computer Software | |
| Quality management Customer satisfaction Guidelines for complaints handling in organizations | |
| Quality management Guidelines for realizing financial and economic benefits | |
| Quality Management Systems - Fundamentals and Vocabulary | |
| Quality management systems - Guidelines for configuration management | |
| Quality Management Systems - Guidelines for Performance Improvements | |
| Quality management systems - Guidelines for quality management in projects | |
| Quality management systems - Requirements | |
| Quality management systems Guidelines for configuration management | |
| Quality management systems Guidelines for quality management in projects | |
| Quality of dialysis fluid for haemodialysis and related therapies | |
| R\xe9seaux industriels de communication \x97 S\xe9curit\xe9 dans les r\xe9seaux et les syst\xe8mes \x97 Partie 3-3: Exigences de s\xe9curit\xe9 des syst\xe8mes et niveaux de s\xe9curit\xe9 | |
| Risk management - Risk assessment techniques | |
| Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment | |
| Safety requirements for lifts (elevators) - Part 1: Global essential safety requirements (GESRs) | |
| Securite Des Appareils Electrodomestiques Et Analogues Partie 2: Regles Particulieres Pour Les Refrigerateurs, Les Congelateurs Et Les Fabriques De Glace | |
| Security for industrial automation and control systems - Part 2-3: Patch management in the IACS environment | |
| Security for industrial automation and control systems - Part 2-4: Security program requirements for IACS service providers | |
| Security for industrial automation and control systems \x97 Part 2-4: Security program requirements for IACS service providers | |
| Self-propelled machinery for forestry - Laboratory tests and performance requirements for roll-over protective structures - Part 1: General machines | |
| Self-propelled machinery for forestry \x97 Laboratory tests and performance requirements for roll-over protective structures \x97 Part 2: Machines having a rotating platform with a cab and boom on the platform... | |
| Solid biofuels - Conversion of analytical results from one basis to another | |
| Solid biofuels - Determination of bulk density | |
| Solid biofuels - Determination of fines content in samples of pellets | |
| Solid Biofuels - Determination of length and diameter of pellets | |
| Solid biofuels - Determination of major elements - Al, Ca, Fe, Mg, P, K, Si, Na and Ti | |
| Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets | |
| Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 2: Briquettes | |
| Solid biofuels - Determination of minor elements | |
| Solid biofuels - Determination of moisture content - Oven dry method - Part 1: Total moisture - Reference method | |
| Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method | |
| Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample | |
| Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above | |
| Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below | |
| Solid biofuels - Determination of the water soluble chloride, sodium and potassium content | |
| Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen | |
| Solid biofuels - Determination of total content of sulfur and chlorine | |
| Solid biofuels - Fuel specifications and classes - Part 1: General requirements | |
| Solid biofuels - Fuel specifications and classes - Part 2: Graded wood pellets | |
| Solid biofuels - Fuel specifications and classes - Part 3: Graded wood briquettes | |
| Solid biofuels - Fuel specifications and classes - Part 4: Graded wood chips | |
| Solid biofuels - Fuel specifications and classes - Part 5: Graded firewood | |
| Solid biofuels - Fuel specifications and classes - Part 6: Graded non-woody pellets | |
| Solid biofuels - Fuel specifications and classes - Part 7: Graded non-woody briquettes | |
| Solid biofuels - Particle size distribution of disintegrated pellets | |
| Solid biofuels - Terminology, definitions and descriptions | |
| Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement | |
| Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus | |
| Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements | |
| Steel - Surface Finish of Hot-Rolled Plates and Wide Flats - Delivery Requirements | |
| Sterilization of health care products - Biological indicators - Part 1: General requirements | |
| Sterilization of health care products - Biological indicators - Part 2: Biological indicators for ethylene oxide sterilization processes | |
| Sterilization of health care products - Biological indicators - Part 3: Biological indicators for moist heat sterilization processes | |
| Sterilization of health care products - Biological indicators - Part 4: Biological indicators for dry heat sterilization processes | |
| Sterilization of health care products - Biological indicators - Part 5: Biological indicators for low-temperature steam and formaldehyde sterilization processes | |
| Sterilization of health care products - Chemical indicators - Part 1: General requirements | |
| Sterilization of health care products - Chemical indicators - Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test | |
| Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration | |
| Sterilization of health care products - Chemical indicators - Part 5: Class 2 indicators for Bowie and Dick-type air removal tests | |
| Sterilization of Health Care Products - General Requirements for Characterization of a Sterilizing Agent and the Development, Validation and Routine Control of a Sterilization Process for Medical Devices | |
| Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose | |
| Sterilization of Health Care Products - Requirements for Validation and Routine Control - Industrial Moist Heat Sterilization | |
| Sterilization of health care products \x97 General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices | |
| Sustainable development of communities - Indicators for city services and quality of life | |
| Syst\xe8mes de management de l\x92\xe9nergie - Exigences et recommandations de mise en oeuvre | |
| Syst\xe8mes de management de l\x92\xe9nergie - Mesurage de la performance \xe9nerg\xe9tique \xe0 l\x92aide des performances \xe9nerg\xe9tiques de r\xe9f\xe9rence (PER) et d\x92indicateurs de performance \xe9nerg\xe9tique (IP\xc9) - Principes g\xe9n\xe9raux et lignes... | |
| Syst\xe8mes de management de l\x92\xe9nergie \x97 Exigences et recommandations de mise en oeuvre | |
| Syst\xe8mes de management de la qualit\xe9 - Exigences | |
| Syst\xe8mes de management de la qualit\xe9 - Lignes directrices pour les plans qualit\xe9 | |
| Syst\xe8mes de management de la qualit\xe9 - Principes essentiels et vocabulaire | |
| Syst\xe8mes de management de la qualit\xe9 \x97 Exigences | |
| Syst\xe8mes de management de la qualit\xe9 \x97 Principes essentiels et vocabulaire | |
| Syst\xe8mes de management environnemental - Exigences et lignes directrices pour son utilisation | |
| Syst\xe8mes de management environnemental - Lignes directrices g\xe9n\xe9rales concernant les principes, les syst\xe8mes et les techniques de mise en \x9cuvre | |
| Syst\xe8mes de management environnemental - Lignes directrices g\xe9n\xe9rales concernant les principes, les syst\xe8mes et les techniques de mise en oeuvre | |
| Syst\xe8mes de management environnemental - Lignes directrices g\xe9n\xe9rales pour la mise en application | |
| Syst\xe8mes de management environnemental \x97 Exigences et lignes directrices pour son utilisation | |
| Systemes De Conversion D\xb4Energie Eolienne (SCEE) : Performances | |
| Systemes De Management De La Qualite - Exigences | |
| Systems for evacuation of plume generated by medical devices | |
| Technologies de l'information - Interconnexion de syst\xe8mes ouverts (OSI) - Protocole de pr\xe9sentation en mode connexion: Sp\xe9cification du protocole AMENDEMENT 1 : Am\xe9lioration de l'efficacit\xe9 | |
| Technologies de l'information - Interconnexion de syst\xe8mes ouverts (OSI) - Protocole de pr\xe9sentation en mode connexion: Sp\xe9cification du protocole AMENDEMENT 2: Unit\xe9 fonctionnelle de connexions imbriqu\xe9es | |
| Technologies de l'information - Interconnexion de syst\xe8mes ouverts (OSI) - Protocole de pr\xe9sentation en mode connexion: Sp\xe9cification du protocole | |
| Technologies De L'Information - Interconnexion De Systmes Ouverts (OSI) - Specification Du Protocole Pour L'Element De Service De Controle D'Association: Formulaire De Declaration De Conformite D'Une Instance De Protocole (PICS)... | |
| Technologies de l'information - Techniques de s\xe9curit\xe9 - Code de bonne pratique pour la gestion de la s\xe9curit\xe9 de l'information | |
| Technologies de l\x92information - Applications g\xe9n\xe9riques de l'ASN.1 : Infoset rapide | |
| Technologies de l\x92information - Applications g\xe9n\xe9riques de l'ASN.1 : Services web rapides | |
| Technologies de l\x92information - Architecture de document ouverte (ODA) et format de transfert : Architecture de contenu graphique en points | |
| Technologies de l\x92information - Architecture de document ouverte (ODA) et format de transfert : Architecture de contenu graphique g\xe9om\xe9trique | |
| Technologies de l\x92information - Compression et codage num\xe9riques des images fixes \xe0 model\xe9 continu : Extensions AMENDEMENT 1 : Disposition pour permettre l\x92enregistrement de types et de versions de nouvelle... | |
| Technologies de l\x92information - Compression et codage num\xe9riques des images fixes \xe0 model\xe9 continu : Extensions | |
| Technologies de l\x92information - Interconnexion de syst\xe8mes ouverts (OSI) - S\xe9curit\xe9 g\xe9n\xe9rique des couches sup\xe9rieures : Aper\xe7u, mod\xe8les et notation | |
| Technologies de l\x92information - Interconnexion de syst\xe8mes ouverts (OSI) - S\xe9curit\xe9 g\xe9n\xe9rique des couches sup\xe9rieures : D\xe9finition du service assur\xe9 par l\x92\xe9l\xe9ment de service d\x92\xe9change de s\xe9curit\xe9 (SESE) | |
| Technologies de l\x92information - Interconnexion de syst\xe8mes ouverts (OSI) - S\xe9curit\xe9 g\xe9n\xe9rique des couches sup\xe9rieures : Sp\xe9cification de la syntaxe de protection du transfert | |
| Technologies de l\x92information - Interconnexion de syst\xe8mes ouverts (OSI) - S\xe9curit\xe9 g\xe9n\xe9rique des couches sup\xe9rieures : Sp\xe9cification du protocole d\x92\xe9l\xe9ment de service d\x92\xe9change de s\xe9curit\xe9 (SESE) | |
| Technologies de l\x92information - Op\xe9rations distantes : R\xe9alisations OSI - D\xe9finition du service de l\x92\xe9l\xe9ment de service d\x92op\xe9rations distantes (ROSE) | |
| Technologies de l\x92information - Syst\xe8me de codage d\x92images JPEG 2000 : Images JPEG 2000 anim\xe9es | |
| Technologies de l\x92information - Techniques de s\xe9curit\xe9 - Syst\xe8mes de gestion de la s\xe9curit\xe9 de l\x92information - Exigences | |
| Technologies de l\x92information -Architecture de document ouverte (ODA) etformat de transfert: Architecture decontenu graphique en points AMENDEMENT 1 | |
| Technologies De L\xb4Information - Communication De Donnees - Connecteur D\xb4Interface ETTD/ETCD A 15 Poles Et Affectation Des Numeros De Contacts | |
| Technologies De L\xb4Information - Interconnexion De Systemes Ouverts (OSI) - Modele De Reference De Base: Denomination Et Adressage | |
| Terrestrial photovoltaic (PV) modules \x97 Design qualification and type approval \x97 Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules | |
| Terrestrial photovoltaic (PV) modules \x97 Design qualification and type approval \x97 Part 1-2: Special requirements for testing of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modules | |
| Terrestrial photovoltaic (PV) modules \x97 Design qualification and type approval \x97 Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules | |
| Terrestrial photovoltaic (PV) modules \x97 Design qualification and type approval \x97 Part 1-4: Special requirements for testing of thin-film Cu(In,Ga)(S,Se)2 based photovoltaic (PV) modules | |
| Terrestrial photovoltaic (PV) modules \x97 Design qualification and type approval \x97 Part 1: Test requirements | |
| Terrestrial photovoltaic (PV) modules \x97 Design qualification and type approval \x97 Part 2: Test procedures | |
| Thin-film terrestrial photovoltaic (PV) modules \x97 Design qualification and type approval | |
| Tracheobronchial tubes - Sizing and marking | |
| Tracteurs et machines agricoles automotrices - Commandes de l\x92op\xe9rateur - Forces de manoeuvre, d\xe9placements, emplacements et modes de fonctionnement | |
| Tuyaux en t\xf4le ondul\xe9e | |
| Washer-disinfectors - Part 6: Requirements and tests for washer-disinfectors employing thermal disinfection for non-invasive, non-critical medical devices and healthcare equipment | |
| Washer-disinfectors - Part 7: Requirements and tests for washer-disinfectors employing chemical disinfection for non-invasive, non-critical thermolabile medical devices and healthcare equipment | |
| Water for haemodialysis and related therapies | |
| Water treatment equipment for haemodialysis applications and related therapies | |
| Welding consumables \x97 Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels \x97 Classification | |
| Welding consumables Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels Classification | |
| Wind Energy Conversion Systems (WECS) - Interconnection to the Electric Utility | |
| Wind Energy Conversion Systems (WECS) - Safety, Design, and Operation Criteria | |
| Wind energy generation systems - Part 12-1: Power performance measurements of electricity producing wind turbines | |
| Wind turbines - Part 11: Acoustic noise measurement techniques | |
| Wind turbines - Part 24: Lightning protection | |
| Zinc-Coated Steel Wire Strand |
| << Prev | Next >> |