AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| Adhesives - One component polyurethane (PUR) for load-bearing timber structures - Classification and performance requirements | |
| Adhesives - One component polyurethane for load bearing timber structures - Classification and performance requirements | |
| Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 1: Long-term tension load test perpendicular to the bond line at varying climate conditions... | |
| Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 2: Static load test of multiple bondline specimens in compression shear | |
| Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear... | |
| Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3: Creep deformation test at cyclic climate conditions with speciments loaded in bending shear... | |
| Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time for one component polyurethane adhesives | |
| Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time under referenced conditions | |
| Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of conventional pressing time | |
| Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of minimum pressing time under referenced conditions | |
| Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature in a non-reactive environment - Determination of creep behaviour by the cold end method (Endorsed by AENOR in... | |
| Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature in a non-reactive environment - Determination of creep behaviour by the cold grip method (Endorsed by Asociación Española... | |
| Agglomerated stone - Slabs and cut-to-size products for vanity and kitchen tops | |
| AGRICULTURAL MACHINERY. AGRICULTURAL SELF-PROFPELLED, MOUNTED, SEMI-MOUNTED AND TRAILED MACHINES. COMMON SAFETY REQUIREMENTS | |
| Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air | |
| Aluminium and aluminium alloys - Environmental aspects of aluminium products - General guidelines for their inclusion in standards | |
| Ambient air quality - Atmospheric measurements near ground with FTIR spectroscopy | |
| Animal feeding stuffs - Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion | |
| Animal feeding stuffs - Determination of calcium, sodium, phosphorus, magnesium, potassium, iron, zinc, copper, manganese, cobalt, molybdenum, arsenic, lead and cadmium by ICP-AES | |
| Animal feeding stuffs - Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese and cobalt after pressure digestion by ICP-AES | |
| Animal feeding stuffs: Methods of sampling and analysis - Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion | |
| Animal feeding stuffs: Methods of sampling and analysis - Determination of calcium, sodium, phosphorus, magnesium, potassium, iron, zinc, copper, manganese, cobalt, molybdenum and lead by ICP-AES | |
| Animal feeding stuffs: Methods of sampling and analysis - Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese and cobalt after pressure digestion by ICP-AES | |
| Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods | |
| BAR CODING - TERMINOLOGY | |
| Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method | |
| Bitumens and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method | |
| Bonding sealants - Part 1: Bonded glazing sealants for direct light exposure | |
| Candles - Product safety labels (Endorsed by AENOR in January of 2008.) | |
| Candles - Product safety labels (Endorsed by Asociación Española de Normalización in December of 2019.) | |
| Candles - Specification for fire safety (Endorsed by AENOR in January of 2008.) | |
| Candles - Specification for fire safety (Endorsed by Asociación Española de Normalización in December of 2019.) | |
| Candles - Specification for sooting behaviour (Endorsed by AENOR in August of 2008.) | |
| Candles - Specification for sooting behaviour (Endorsed by Asociación Española de Normalización in January of 2019.) | |
| Cereal and cereal products - Determination of Besatz in wheat (Triticum aestivum L.), durum wheat (Triticum durum Desf.), rye (Secale cereale L.),triticale (Triticosecale Wittmack spp) and feed barley (Hordeum vulgare... | |
| Cereals and cereal products - Determination of Besatz in wheat (Triticum aestivum L.), durum wheat (Triticum durum Desf.), rye (Secale cereale L.) and feed barley (Hordeum vulgare L.) | |
| Cereals and cereal products - Durum wheat (T. durum Desf.) - Determination of percentage of mitadine grains and calculation of percentage of vitreous grains | |
| Characterization of waste - Determination of polycyclic aromatic hydrocarbons (PAH) in waste using gas chromatography mass spectrometry (GC/MS) | |
| Chemicals used for treatment of swimming pool water - Carbon dioxide | |
| Chemicals used for treatment of swimming pool water - Chlorine | |
| Chemicals used for treatment of swimming pool water - Hydrochloric acid | |
| Chemicals used for treatment of swimming pool water - Sodium carbonate | |
| Chemicals used for treatment of water intended for human consumption - Sodium permanganate | |
| Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products (Endorsed by... | |
| Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products | |
| Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 4: Specifications for decking profiles and tiles | |
| Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles | |
| Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements | |
| Control for heating, ventilating and air-conditioning applications - Electronic individual zone control equipment | |
| Conveyor belts - Drum friction testing | |
| CONVEYOR BELTS. DRUM FRICTION TESTING. | |
| Copper and copper alloys - Determination of cadmium content - Flame atomic absorption spectrometric method (FAAS) | |
| Copper and copper alloys - Determination of lead content - Flame atomic absorption spectrometric method (FAAS) | |
| Copper and copper alloys - Inductively coupled plasma optical emission spectrometry | |
| Cycles - Requirements and test methods for cycle locks | |
| Cycles - Terminology | |
| Derivatives from coal pyrolysis - Coal tar based oils: wash oils - Specifications and test methods | |
| Derivatives from coal pyrolysis - Terminology | |
| Determination of the influence of the corrosion protection coating on the anchorage capacity of the transverse anchorage bars in prefabricated reinforced components of autoclaved aerated concrete | |
| District heating pipes - Factory made flexible pipe systems - Part 1: Classification, general requirements and test methods (Endorsed by Asociación Española de Normalización in June of 2022.) | |
| District heating pipes - Factory made flexible pipe systems - Part 2: Bonded system with plastic service pipes; requirements and test methods (Endorsed by Asociación Española de Normalización in June... | |
| District heating pipes - Factory made flexible pipe systems - Part 3: Non bonded system with plastic service pipes; requirements and test methods (Endorsed by Asociación Española de Normalización in... | |
| District heating pipes - Factory made flexible pipe systems - Part 4: Bonded system with metal service pipes; requirements and test methods (Endorsed by Asociación Española de Normalización in June... | |
| District heating pipes - Pre-insulated flexible pipe systems - Part 1: Classification, general requirements and test methods | |
| District heating pipes - Pre-insulated flexible pipe systems - Part 2: Bonded plastic service pipes - Requirements and test methods (Endorsed by AENOR in April of 2016.) | |
| District heating pipes - Pre-insulated flexible pipe systems - Part 2: Bonded plastic service pipes - Requirements and test methods (Endorsed by AENOR in March of 2011.) | |
| District heating pipes - Pre-insulated flexible pipe systems - Part 3: Non bonded system with plastic service pipes; requirements and test methods (Endorsed by AENOR in April of 2016.) | |
| District heating pipes - Pre-insulated flexible pipe systems - Part 3: Non bonded system with plastic service pipes; requirements and test methods (Endorsed by AENOR in March of 2011.) | |
| District heating pipes - Pre-insulated flexible pipe systems - Part 4: Bonded system with metal service pipes; requirements and test methods | |
| Dryers and ovens, in which flammable substances are released - Safety requirements (Endorsed by AENOR in January of 2016.) | |
| Dryers and ovens, in which flammable substances are released - Safety requirements | |
| Dryers and ovens, in which flammable substances are released. Safety requirements. | |
| Ductile iron pipes, fittings and accessories - External cement mortar coating for pipes - Requirements and test methods | |
| Earth-moving machinery - Design requirements for circulation on the road | |
| Electronic fee collection - Interoperability application profile for DSRC (Endorsed by AENOR in November of 2014.) | |
| Electronic fee collection - Interoperability application profile for DSRC (Endorsed by Asociación Española de Normalización in May of 2023.) | |
| Energy Performance of Buildings - Control for heating, ventilating and air conditioning applications - Part 1: Electronic individual zone control equipment - Modules M3-5, M4-5, M5-5 | |
| Energy performance of buildings - Economic evaluation procedure for energy systems in buildings - Part 1: Calculation procedures, Module M1-14 | |
| Energy performance of buildings - Economic evaluation procedure for energy systems in buildings | |
| Energy performance of buildings - Heating and DHW systems in buildings - Part 3: Measured energy performance, Module M3-10, M8-10 | |
| Energy performance of buildings - Heating systems and DHW in buildings - Part 1: Inspection of boilers, heating systems and DHW, Module M3-11, M8-11 | |
| Energy performance of buildings - Overall energy use and definition of energy ratings | |
| Ethanol as a blending component for petrol - Determination of copper content - Graphite furnace atomic absorption spectrometric method | |
| Ethanol as a blending component for petrol - Determination of inorganic chloride - Potentiometric method | |
| Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method | |
| Ethanol as a blending component for petrol - Determination of pHe | |
| Ethanol as a blending component for petrol - Determination of phosphorus content - Ammonium molybdate spectrometric method | |
| Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method | |
| Ethanol as a blending component for petrol - Determination of sulfur content - Wavelength dispersive X-ray fluorescence spectrometric method | |
| Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method | |
| Ethanol as a blending component for petrol - Determination of water content - Karl Fischer coulometric titration method | |
| Execution of special geotechnical work - Bored piles | |
| Execution of special geotechnical work - Diaphragm walls | |
| EXECUTION OF SPECIAL GEOTECHNICAL WORK - GROUND ANCHORS. | |
| Execution of special geotechnical works - Diaphragm walls. | |
| Execution of special geotechnical works - Ground anchors | |
| EXECUTION OF SPECIAL GOETECHNICAL WORK - BORED PILES | |
| Fertilizers - Determination of ammoniacal nitrogen | |
| Fertilizers - Determination of chelating agents - Determination of iron chelated by EDDHSA by ion pair chromatography | |
| Fertilizers - Determination of chelating agents - Determination of iron chelated by o,p-EDDHA by reversed phase HPLC | |
| Fertilizers - Determination of cyanamide nitrogen | |
| Fertilizers - Determination of dicyandiamide - Method using high-performance liquid chromatography (HPLC) | |
| Fertilizers - Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen | |
| Fertilizers - Determination of nitric and ammoniacal nitrogen according to Arnd | |
| Fertilizers - Determination of nitric and ammoniacal nitrogen according to Devarda | |
| Fertilizers - Determination of nitric and ammoniacal nitrogen according to Ulsch | |
| Fertilizers - Determination of the water-soluble potassium content | |
| Fertilizers - Determination of total nitrogen in calcium cyanamide containing nitrates | |
| Fertilizers - Determination of total nitrogen in calcium cyanamide nitrate free | |
| Fertilizers - Determination of total nitrogen in urea | |
| Fertilizers - Spectrophotometric determination of biuret in urea | |
| Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Method for exposure to bitumen | |
| Food processing machinery - Fish heading and filleting machines - Safety and hygiene requirements (Endorsed by AENOR in February of 2015.) | |
| Foodstuffs - Detection of food allergens by immunological methods - Part 1: General considerations | |
| Foodstuffs - Detection of food allergens by molecular biological methods - Part 1: General considerations | |
| Foodstuffs - Determination of d-biotin by HPLC | |
| Foodstuffs - Determination of trace elements - Determination of inorganic arsenic in seaweed by hydride generation atomic absorption spectrometry (HGAAS) after acid extraction | |
| Foodstuffs - Determination of trace elements - Determination of sodium and magnesium by flame atomic absorption spectrometry (AAS) after microwave digestion | |
| Founding - Designation system for cast iron - Material symbols and material numbers | |
| Founding - Grey cast irons | |
| Founding - Malleable cast irons | |
| Founding - Spheroidal graphite cast irons | |
| Founding - Technical conditions of delivery - Part 1: General | |
| Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings | |
| Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings | |
| Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castings | |
| Founding - Technical conditions of delivery - Part 5: Additional requirements for magnesium alloy castings | |
| Founding - Technical conditions of delivery - Part 6: Additional requirements for zinc alloy castings | |
| FOUNDING. DESIGNATION SYSTEM FOR CAST IRON. MATERIAL SYMBOLS AND MATERIAL NUMBERS. | |
| FOUNDING. GREY CAST IRONS. | |
| FOUNDING. MALLEABLE CAST IRONS. | |
| FOUNDING. SPHEROIDAL GRAPHITE CAST IRONS. | |
| FOUNDING. TECHNICAL CONDITIONS OF DELIVERY. PART 1: GENERAL. | |
| FOUNDING. TECHNICAL CONDITIONS OF DELIVERY. PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS. | |
| FOUNDING. TECHNICAL CONDITIONS OF DELIVERY. PART 3: ADDITIONAL REQUIREMENTS FOR IRON CASTINGS. | |
| FOUNDING. TECHNICAL CONDITIONS OF DELIVERY. PART 4: ADDITIONAL REQUIREMENTS FOR ALUMINIUM ALLOY CASTINGS. | |
| Fugitive and diffuse emissions of common concern to industry sectors - Measurement of fugitive emission of vapours generating from equipment and piping leaks | |
| Fugitive and diffuse emissions of common concern to industry sectors - Qualification of fugitive dust sources by Reverse Dispersion Modelling | |
| Furniture - Strength, durability and safety - Requirements for non-domestic seating | |
| Furniture - Strength, durability and safety - Requirements for non-domestic tables | |
| Garden equipment - Garden blowers, vacuums and blower/vacuums - Safety | |
| Gas infrastructure - Safety Management System for Gas Networks with maximum operting pressure up to and including 16 bar | |
| Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW... | |
| Gas-fired central heating boilers - Part 2-2: Specific standard for type B1 appliances | |
| Gas-fired central heating boilers - Part 2-3: Specific standard for hybrid units combining a gas-fired boiler and an electrical heat pump in a product | |
| Gas-fired central heating boilers - Specific requirements for condensing boilers with a nominal heat input greater than 70 kW but not exceeding 1000 kW | |
| Gas-fired central heating boilers - Type C boilers of nominal heat input exceeding 70 kW, but not exceeding 1 000 kW | |
| Gas-fired heating boilers - Part 1: General requirements and tests | |
| Geosynthetic barriers - Characteristics required for use in transportation infrastructure | |
| Geotextiles and geotextile-related products - Characteristics required for use in pavements and asphalt overlays | |
| Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) | |
| Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids | |
| Hardware for furniture - Strength and durability of hinges and their components - Hinges pivoting on a vertical axis | |
| Health informatics - Categorial structure for terminologies of human anatomy (Endorsed by AENOR in January of 2008.) | |
| Heating boilers - Electrical power consumption for heat generators - System boundaries - Measurements | |
| Heating systems in buildings - Design of embedded water based surface heating and cooling systems - Part 1: Determination of the design heating and cooling capacity | |
| Heating systems in buildings - Design of embedded water based surface heating and cooling systems - Part 2: Design, dimensioning and installation | |
| Heating systems in buildings - Design of embedded water based surface heating and cooling systems - Part 3: Optimizing for use of renewable energy sources | |
| Heating systems in buildings - Design of heat pump heating systems | |
| Heating systems in buildings - Inspection of boilers and heating systems | |
| Hydraulic binder for non-structural applications - Definition, specifications and conformity criteria | |
| Hydraulic binder for non-structural applications: definition, specifications and conformity criteria | |
| Identification card systems - Inter-sector electronic purse - Part 1: Definitions, concepts and structures (Endorsed by AENOR in June of 2000.) | |
| IDENTIFICATION CARD SYSTEMS - INTER-SECTOR ELECTRONIC PURSE - PART 2: SECURITY ARCHITECTURE (Endorsed by AENOR in June of 2000.) | |
| Identification card systems - Inter-sector electronic purse - Part 3: Data elements and interchanges (Endorsed by AENOR in June of 2000.) | |
| Identification card systems - Inter-sector electronic purse - Part 4: Data objects (Endorsed by AENOR in November of 2000.) | |
| Identification card systems - Surface transport applications - Part 1: Elementary data types, general code lists and general data elements (Endorsed by AENOR in March of 2006.) | |
| Identification card systems - Surface transport applications - Part 1: Elementary data types, general code lists and general data elements (Endorsed by AENOR in May of 2015.) | |
| Identification card systems - Surface transport applications - Part 2: Transport and travel payment related data elements and code lists (Endorsed by AENOR in March of 2006.) | |
| Identification card systems - Surface transport applications - Part 2: Transport and travel payment related data elements and code lists (Endorsed by AENOR in May of 2015.) | |
| Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment. | |
| Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment | |
| Industrial valves - Performance characteristics of thermoplastic valves when used as construction products | |
| Inorganic fertilizers - Determination of cyanamide nitrogen | |
| Inorganic fertilizers - Determination of total nitrogen in calcium cyanamide containing nitrates | |
| Inorganic fertilizers - Determination of total nitrogen in calcium cyanamide nitrate free | |
| Knee and elbow protectors for indoor sports - Safety requirements and test methods | |
| Laminate floor coverings - Elements with directly applied printing and resin surface layer - Specifications, requirements and test methods (Endorsed by Asociación Española de Normalización in November of 2021.) | |
| Laminate floor coverings - Elements with directly applied printing and resin surface layer - Specifications, requirements and test methods | |
| Liquefied petroleum gases - Determination of dissolved residues - High temperature Gas chromatographic method | |
| Liquefied petroleum gases - Determination of dissolved residues - High-temperature gravimetric method | |
| LPG equipment and accessories - LPG propulsion systems for boats, yachts and other craft - Installation requirements | |
| LPG equipment and accessories - LPG propulsion systems for boats, yachts and other craft | |
| LPG equipment and accessories - LPG propulsion systems for boats, yachts and other watercraft - Installation requirements | |
| Machine-tools safety - Safety requirements for the design and construction of work holding chucks | |
| MACHINE-TOOLS SAFETY. SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF WORK HOLDING CHUCKS. | |
| Machines and plants for mining and tooling of natural stone - Safety - Requirements for edge finishing machines (Endorsed by AENOR in January of 2016.) | |
| Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines | |
| Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface-finishing machines | |
| Maintenance - Qualification of maintenance personnel | |
| Non Destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Zone location of AE sources | |
| Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels | |
| Oil spill identification - Petroleum and petroleum related products - Part 1: Sampling | |
| Oil spill identification - Petroleum and petroleum related products - Part 2: Analytical method and interpretation of results based on GC-FID and GC-low resolution-MS analyses | |
| One off Kachelgrundöfen/Putz grundöfen (tiled/mortared stoves) - Dimensioning | |
| Packaging - Complete, filled transport packages and unit loads - Performance testing schedules for common distribution chains | |
| Packaging - Flexible aluminium tubes - Determination of the adhesion of the internal and external protective lacquering. | |
| Packaging - Flexible aluminium tubes - Determination of the adhesion of the internal and external protective lacquering | |
| Packaging - Flexible aluminium tubes - Test method to determine the porosity of the internal coating | |
| Packaging - Flexible laminate and plastic tubes - Test method to determine the print adhesion | |
| Packaging - Flexible laminate tubes - Test methods to assess the strength of the side seam | |
| Packaging - Flexible laminate tubes - Test methods to determine the strength of the head welding | |
| Packaging - Management of hygiene in the production of packaging for foodstuffs - Requirements | |
| Packaging - Test method to determine the porosity of the internal coating of flexible aluminium tubes - Part 1: Sodium chloride test | |
| Packaging - Test method to determine the porosity of the internal coating of flexible aluminium tubes - Part 2: Copper sulphate test | |
| Packaging - Transport packaging for dangerous goods - Comparative material testing of polyethylene grades | |
| Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against algae | |
| Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against fungi | |
| Paper and board intended to come into contact with foodstuffs - Determination of formaldehyde in an aqueous extract | |
| Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract | |
| PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS. DETERMINATION OF FORMALDEHYDE IN AN AQUEOUS EXTRACT. | |
| Petroleum products - Test method for free water in liquefied petroleum gas by visual inspection | |
| Petroleum products and related materials - Determination of hydrocarbon types - Fluorescent indicator adsorption method | |
| Plastics - Extruded and/or calendered, non-reinforced film and sheeting made of plasticized poly(vinyl chloride) (PVC-P) - Characterization and designation | |
| Plastics - Recycled Plastics - Characterisation of plastics wastes | |
| Plastics - Recycled plastics - Characterisation of poly(vinyl chloride) (PVC) recyclates | |
| Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates | |
| Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates | |
| Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates | |
| Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates | |
| Plastics - Recycled plastics - Characterization of Polyethylene (PE) recyclates | |
| Plastics - Recycled plastics - Characterization of polypropylene (PP) recyclates | |
| Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates | |
| Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content | |
| Plastics - Sorted plastics wastes - Part 1: General Characterisation | |
| Plastics - Sorted plastics wastes - Part 2: Quality grades of sorted Polyethylene (PE) wastes and specific test methods | |
| Plastics - Sorted plastics wastes - Part 3: Quality grades of sorted Polypropylene (PP) wastes and specific test methods | |
| Plastics - Sorted plastics wastes - Part 4: Quality grades of sorted poly(ethylene terephtalate) (PET) wastes and specific test methods | |
| Plastics - Sorted plastics wastes - Part 5: Quality grades of sorted poly(vinyl chloride) (PVC) wastes and specific test methods | |
| Plastics - Sorted plastics wastes - Part 6: Quality grades of sorted polystyrene (PS) wastes and specific test methods | |
| Plastics piping systems for drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) - Manholes and inspection chambers | |
| Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General. | |
| Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General | |
| Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes. | |
| Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes | |
| Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings. | |
| Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings | |
| Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves. | |
| Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves | |
| Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5: Fitness for purpose of the system. | |
| Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5: Fitness for purpose of the system | |
| Precast concrete products - Normal weight and lightweight concrete shuttering blocks - Product properties and performance | |
| Precast concrete products - Resin bound concrete - Requirements and test methods | |
| Precast concrete products - Specification of glassfibres for reinforcement of mortars and concretes | |
| Precast concrete products - Wood-chip concrete shuttering blocks - Product properties and performance | |
| Primers for cold and hot applied joint sealants - Part 1: Determination of homogeneity | |
| Primers for cold and hot applied joint sealants - Part 2: Determination of resistance against alkali | |
| Primers for cold and hot applied joint sealants - Part 3: Determination of solids content and evaporation behaviour of volatiles | |
| Private security services - Terminology | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep under sustained tensile load for synthetic resin products (PC) for the anchoring... | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of tensile strength development for polymers | |
| Products and systems for the protection and repair of concrete structures. Test methods. Measurement of bond strength by pull-off. | |
| Protective clothing for firefighters - Laboratory test methods and performance requirements for wildland clothing | |
| Public transport - Service interface for real-time information relating to public transport operations - Part 1: Context and framework (Endorsed by AENOR in October of 2015.) | |
| Public transport - Service interface for real-time information relating to public transport operations - Part 1: Context and framework (Endorsed by Asociación Española de Normalización in October of 2022.) | |
| Public transport - Service interface for real-time information relating to public transport operations - Part 2: Communications (Endorsed by AENOR in October of 2015.) | |
| Public transport - Service interface for real-time information relating to public transport operations - Part 2: Communications infrastructure (Endorsed by Asociación Española de Normalización in January of 2023.) | |
| Public transport - Service interface for real-time information relating to public transport operations - Part 3: Functional service interfaces (Endorsed by AENOR in October of 2015.) | |
| Public transport - Service interface for real-time information relating to public transport operations - Part 3: Functional service interfaces (Endorsed by Asociación Española de Normalización in October of 2022.) | |
| Railway applications - Acoustics - Rail and wheel roughness measurement related to noise generation | |
| Railway applications - Axlebox condition monitoring - Interface and design requirements - Part 1: Track side equipment and rolling stock axlebox | |
| Railway applications - Axlebox condition monitoring - Interface and design requirements - Part 2: Performance and design requirements of on-board systems for temperature monitoring | |
| Railway applications - Braking - Automatic variable load sensing devices | |
| Railway applications - Braking - Brake pipe accelerator valve | |
| Railway applications - Braking - Brake pipe accelerator | |
| Railway applications - Braking - Distributor valves and distributor-isolatin g devices | |
| Railway applications - Braking - Empty-loaded changeover devices | |
| Railway applications - Braking - Relay valves | |
| Railway applications - Braking - Wheel slide protection (Endorsed by Asociación Española de Normalización in November of 2019.) | |
| Railway applications - Braking - Wheel slide protection | |
| Railway applications - Classification system for railway vehicles - Part 4: Function groups | |
| Railway applications - Classification system for railway vehicles - Part 5: System Breakdown Structure (SBS) | |
| Railway applications - Designation system for railway vehicles - Part 1: General principles | |
| Railway applications - Designation system for railway vehicles - Part 2: Product groups | |
| Railway applications - Designation system for railway vehicles - Part 3: Designation of installation sites and locations (Endorsed by AENOR in October of 2006.) | |
| Railway applications - Designation system for railway vehicles - Part 3: Designation of installation sites and locations | |
| Railway applications - Line categories for managing the interface between load limits of vehicles and infrastructure | |
| Railway applications - Noise emission - Characterisation of the dynamic properties of track sections for pass by noise measurements | |
| Railway applications - Noise emission - Rail roughness measurement related to rolling noise generation | |
| Railway applications - Railway rolling stock - Buffers | |
| Railway applications - Railway rolling stock - Draw gear and screw coupling | |
| Railway applications - Track - Restoration of rails by electric arc welding | |
| Railway applications - Wheel/rail friction management - Flange lubrication | |
| Railway applications - Wheel/Rail friction management - Part 1-1: Equipment and Application - Flange Lubricants | |
| Railway applications - Wheel/Rail friction management - Part 2-1: Properties and Characteristics - Flange lubricants | |
| Resilient, textile, laminate and modular mechanical locked floor coverings (MMF) - Floor covering standard symbols - Complementary element | |
| Road service area maintenance equipment - Part 1: Terminology (Endorsed by AENOR in November of 2008.) | |
| Road service area maintenance equipment - Part 2: Performance assessment (Endorsed by AENOR in October of 2008.) | |
| Road service area maintenance equipment - Part 2: Performance assessment | |
| Road service area maintenance equipment - Part 3: Classification | |
| Road service area maintenance equipment - Part 4: Delivery acceptance of the machines by the users (Endorsed by AENOR in October of 2009.) | |
| Road transport and traffic telematics - Electronic fee collection - Interoperability application profile for DSRC (Endorsed by AENOR in August of 2009.) | |
| Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures | |
| Rubber- or plastic-coated fabrics - Upholstery fabrics - Classification and methods of test | |
| Safety of industrial trucks - Self propelled trucks over 10 000 kg capacity. | |
| Security service providers - Terminology | |
| Small bore connectors for liquids and gases in healthcare applications - Part 1 - General Requirements | |
| Soil improvers and growing media - Determination of particle size distribution | |
| Solid recovered fuels - Determination of ash content | |
| Solid recovered fuels - Determination of calorific value | |
| Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample | |
| Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles | |
| Solid recovered fuels - Determination of particle size distribution - Part 2: Maximum projected length method (manual) for large dimension particles | |
| Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles | |
| Solid recovered fuels - Determination of the content of volatile matter | |
| Solid recovered fuels - Determination of the current rate of aerobic microbial activity using the real dynamic respiration index | |
| Solid recovered fuels - Methods for sampling | |
| Solid recovered fuels - Methods for the determination of biomass content | |
| Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H) and nitrogen (N) content | |
| Solid recovered fuels - Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content | |
| Solid recovered fuels - Methods for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti) | |
| Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V... | |
| Solid recovered fuels - Methods for the preparation of the laboratory sample | |
| Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample | |
| Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels | |
| Solid recovered fuels - Specifications and classes | |
| Solid recovered fuels - Terminology, definitions and descriptions | |
| Sports and recreational facilities - Ropes courses - Part 1: Construction and safety requirements | |
| Sports- and recreational facilities - Ropes courses - Part 2: Operation requirements (Endorsed by AENOR in December of 2009.) | |
| Sports- and recreational facilities - Ropes courses - Part 2: Operation requirements | |
| Steel static storage systems - Adjustable pallet racking - Tolerances, deformations and clearances | |
| Steel static storage systems - Adjustable pallet racking systems - Principles for structural design | |
| Steel static storage systems - Specification of storage equipment | |
| Steel static storage systems - Tolerances, deformations and clearances | |
| Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices | |
| Structural finger jointed solid timber - Performance requirements and minimum production requirements | |
| Surface active agents - Colorimetric characterization of optically clear coloured liquids (products) as X, Y, Z tristimulus values in transmission | |
| Surface active agents - Quantitative determination of free fatty acid in alkylamidopropylbeta ines - Gas-chromatographic method | |
| Sweepers - Part 1: Classification and Terminology | |
| Sweepers - Part 2: Performance requirements and test methods | |
| Sweepers - Part 3: Efficiency of particulate matter collection - Testing and Evaluation | |
| Sweepers - Part 4: Symbols for operator controls and other displays | |
| Textiles - Methods of testing the fibre proof properties of fabrics: Rubbing test | |
| Textiles - Terry fabrics - Test method for the determination of the resistance to pile loop extraction | |
| Thermal insulation products for building equipment and industrial installations - Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products - Specification | |
| Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation... | |
| Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2: Specification for the installed products (Endorsed by AENOR... | |
| Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation... | |
| Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2: Specification for the installed products (Endorsed by AENOR... | |
| Thermal spraying - Recommendations for constructional design of components with thermally sprayed coatings | |
| Tourism services - Requirements for the provision of professional tourist guide training and qualification programmes | |
| Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 1: General requirements | |
| Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 2: Data acquisition and general requirements for measuring equipment | |
| Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 3: Data validity check and data editing for evaluation | |
| Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 4: Data evaluation | |
| Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 5: Derivation of Test Specifications | |
| Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 6: Automatic recording systems for measuring randomly occurring shock during monitoring of transports | |
| Transportation loads - Measurement and evaluation of dynamic-mechanical loads - Part 6: Automatic recording systems for measuring randomly occurring shock during monitoring of transports | |
| Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems | |
| Ventilation for buildings - Fire precautions for air distribution systems in buildings | |
| Water quality - Guidance standard for the surveying of macrophytes in lakes | |
| Winter and road service area maintenance equipment - Data acquisition and transmission - Part 1: In-vehicle data acquisition (Endorsed by AENOR in September of 2015.) | |
| Winter and road service area maintenance equipment - Data acquisition and transmission - Part 1: In-vehicle data acquisition (Endorsed by Asociación Española de Normalización in January of 2025.) | |
| Winter and road service area maintenance equipments - Data acquisition and transmission - Part 1: In vehicle data acquisition (Endorsed by AENOR in April of 2008.) | |
| Winter and road service area maintenance equipments - Data acquisition and transmission - Part 1: In vehicle data acquisition (Endorsed by AENOR in March of 2011.) | |
| Winter and road service area maintenance equipments - Front-mounted equipments - Interchangeability (Endorsed by AENOR in April of 2008.) | |
| Winter and road service area maintenance equipments - Front-mounted equipments - Interchangeability (Endorsed by AENOR in August of 2010.) | |
| Winter and road service area maintenance equipments - Front-mounted equipments - Part 1: Fixed front mounting plates (Endorsed by AENOR in March of 2012.) | |
| Winter and road service area maintenance equipments - Front-mounted equipments - Part 2: Interchangeability on lifting systems (Endorsed by AENOR in June of 2013.) | |
| Winter and road service area maintenance equipments - Power system and related controls - Interchangeability and performance requirements (Endorsed by AENOR in April of 2008.) | |
| Winter maintenance equipment — Spreading machines (gritting machines) — Part 1: General requirements and definitions for spreading machines | |
| Winter maintenance equipment - Road weather information systems - Part 1: Global definitions and components (Endorsed by AENOR in March of 2011.) | |
| Winter maintenance equipment - Road weather information systems - Part 2: Road weather - Recommended observation and forecast (Endorsed by AENOR in March of 2011.) | |
| Winter maintenance equipment - Road weather information systems - Part 3: Requirements on measured values of stationary equipment (Endorsed by Asociación Española de Normalización in January of 2024.) | |
| Winter maintenance equipment - Road weather information systems - Part 3: Requirements on measured values of stationary equipments (Endorsed by AENOR in March of 2011.) | |
| Winter maintenance equipment - Snow ploughs - Part 1: Product description and requirements (Endorsed by AENOR in July of 2009.) | |
| Winter maintenance equipment - Snow ploughs - Part 2: Testing criteria and their requirements (Endorsed by AENOR in April of 2012.) | |
| Winter maintenance equipment - Spreading and spraying machines - Part 1: General requirements and definitions (Endorsed by Asociación Española de Normalización in May of 2020.) | |
| Winter maintenance equipment - Spreading and spraying machines - Part 2: Requirements for distribution and their test (Endorsed by Asociación Española de Normalización in January of 2020.) | |
| Wood flooring and parquet - Determination of resistance to indentation - Test method (Endorsed by Asociación Española de Normalización in March of 2020.) | |
| Wood flooring and parquet - Determination of resistance to indentation - Test method | |
| WORKPLACE ATMOSPHERES - TERMINOLOGY | |
| Workplace exposure - Terminology |
| << Prev | Next >> |