AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| Adhesives - Emulsion polymer isocyanate (EPI) for load-bearing timber structures - Classification and performance requirements | |
| Adhesives - Emulsion polymerized isocyanate (EPI) for load-bearing timber structures - Classification and performance requirements | |
| Adjustable telescopic aluminium props - Product specifications, design and assessment by calculation and tests | |
| Agricultural machinery - Backhoes - Safety | |
| Air quality - Atmospheric measurements near ground with active Differential Optical Absorption Spectroscopy (DOAS) - Ambient air and diffuse emission measurements | |
| Air quality - Determination of the deposition of benz[a]anthracene, benzo[b]fluoranthene , benzo[j]fluoranthene , benzo[k]fluoranthene , benzo[a]pyrene, dibenz[a,h]anthracen e and indeno[1,2,3-cd]pyre ne | |
| Airport and aviation security services | |
| All terrain vehicles (ATVs - Quads) - Safety requirements and test methods | |
| Animal feedin stuffs - Determination of Ochratoxin A in animal feed by immunoaffinity column clean-up and High Performance Liquid Chromatography with fluorescence detection | |
| Animal feedin stuffs - Determination of the Sum of Fumonisin B1 & B2 in compound animal feed with immunoaffinity clean-up and RP-HPLC with fluorescence detection after pre- or post- column... | |
| Animal feeding stuffs - Determination of arsenic by hydride generation atomic absorption spectrometry (HGAAS) after microwave pressure digestion (digestion with 65 % nitric acid and 30 % hydrogen peroxide) | |
| Animal feeding stuffs - Determination of decoquinate by HPLC with fluorescence detection | |
| Animal feeding stuffs - Determination of dioxins and dioxin-like PCBs by GC/HRMS and of indicator PCBs by GC/HRMS | |
| Animal feeding stuffs - Determination of fluoride content after hydrochloric acid treatment by ion-sensitive electrode method (ISE) | |
| Animal feeding stuffs - Determination of Hydrocyanic acid by HPLC | |
| Animal feeding stuffs - Determination of inorganic arsenic by hydride generation atomic absorption spectrometry (HG-AAS) after microwave extraction and separation by solid phase extraction (SPE) | |
| Animal feeding stuffs - Determination of mercury by cold-vapour atomic absorption spectrometry (CVAAS) after microwave pressure digestion (extraction with 65 % nitric acid and 30 % hydrogen peroxide) | |
| Animal feeding stuffs - Determination of selenium by hydride generation atomic absorption spectrometry (HGAAS) after microwave digestion (digestion with 65 % nitric acid and 30 % hydrogen peroxide) | |
| Animal feeding stuffs - Determination of semduramicin content - Liquid chromatographic method using a "tree" analytical approach | |
| Animal feeding stuffs: Methods of sampling and analysis - Determination of dioxins and dioxin-like PCBs and of indicator PCBs by GC/HRMS | |
| AUTOMATIC SHUT-OFF VALVES FOR GAS BURNERS AND GAS APPLIANCES. | |
| Automatic shut-off valves for gas burners and gas appliances | |
| AUTOMATIC SHUT-OFF VALVES FOR GAS BURNERS AND GAS-BURNING APPLIANCES. | |
| Automatic vent valves for gas burners and gas burning appliances | |
| Automotive fuels - Determination of high-boiling components including fatty acid methyl esters in petrol - Gas chromatographic method | |
| Automotive fuels - Determination of high-boiling components including fatty acid methyl esters in petrol and ethanol (E85) automotive fuel - Gas chromatographic method | |
| Automotive fuels - Determination of iodine value in fatty acid methyl esters (FAME) - Calculation method from gas chromatographic data | |
| Automotive fuels - Determination of manganese and iron content in unleaded petrol - Inductively coupled plasma optical emission spectrometry (ICP OES) method | |
| Automotive fuels - Determination of manganese content in unleaded petrol - Flame atomic absorption spectrometric method (FAAS) | |
| Automotive fuels - Determination of manganese content in unleaded petrol - Inductively coupled plasma optical emission spectrometry (ICP OES) method | |
| Biotechnology - Large-scale process and production - General requirements for management and organization for strain conservation procedures | |
| Biotechnology - Large-scale process and production - Plant building according to the degree of hazard | |
| BLANK DETAIL SPECIFICATION: MICROWAVE MODULAR ELECTRONIC UNITS OF ASSESSED QUALITY CAPABILITY APPROVAL (Endorsed by AENOR in July of 1998.) | |
| BLANK DETAIL SPECIFICATION: PRINTED BOARD ASSEMBLY MODULAR ELECTRONICSUNITS OF ASSESSED QUALITY. CAPABILITY APPROVAL. (Endorsed by AENOR in July of 1998.) | |
| BMX bicycles - Safety requirements and test methods | |
| Breath alcohol test devices for general public - Requirements and test methods | |
| Catheters other than intravascular catheters - Test methods for common properties | |
| Cathodic protection of external surfaces of above ground storage tank bases in contact with soil or foundations | |
| Cathodic protection of ship hulls | |
| Characterization of waste - Analysis of eluates | |
| Characterization of waste - Guidance on selection and application of screening methods | |
| Chemicals used for treatment of water for swimming pools - Sodium hydrogen sulfate | |
| Chemicals used for treatment of water intended for human consumption - Calcium magnesium carbonate | |
| Chemicals used for treatment of water intended for human consumption - Magnesium oxide | |
| Chemicals used for treatment of water intended for human consumption - Sodium hydrogen sulfate | |
| Child protective products - Consumer fitted child resistant locking devices for windows and balcony doors - Safety requirements and test methods | |
| Child use and care articles - Chair mounted seat | |
| Child use and care articles - Infant swings | |
| Cigarettes - Assessment of the ignition propensity - Safety requirement | |
| Classification of non-electrical sources of incoherent optical radiation | |
| Conservation of Cultural Heritage - Guidelines and procedures for choosing appropriate lighting for indoor exhibitions | |
| Conservation of cultural heritage - Guidelines for design of showcases for exhibition and preservation of objects - Part 1: General requirements | |
| Conservation of cultural heritage - Guidelines for design of showcases for exhibition and preservation of objects - Part 2: Technical aspects | |
| Conservation of cultural heritage - Guidelines for management of environmental conditions - Collection storage facilities: definitions and characteristics of buildings dedicated to the preservation and management of cultural heritage | |
| Conservation of cultural heritage - Guidelines for management of environmental conditions - Open storage facilities: definitions and characteristics of collection centres dedicated to the preservation and management of cultural heritage... | |
| Conservation of cultural heritage - Procedures and instruments for measuring humidity in the air and moisture exchanges between air and cultural property | |
| Conservation of cultural heritage - Test methods - Measurement of water absorption by pipe method | |
| Conservation of cultural property - Condition recording for movable cultural heritage | |
| Conservation of cultural property - Condition survey and report of built cultural heritage | |
| Conservation of Cultural property - Methodology for sampling from materials of cultural property - General rules | |
| CONSTRUCTION AND TESTING FOR DRAINS AND SEWERS. | |
| Construction and testing of drains and sewers | |
| Copper and copper alloys - Determination of copper content - Part 1: Electrolytic determination of copper in materials with copper content less than 99,85 % | |
| Copper and copper alloys - Determination of copper content - Part 2: Electrolytic determination of copper in materials with copper content higher than 99,80 % | |
| Copper and copper alloys - Estimation of average grain size by ultrasound | |
| Cryogenic vessels - Valves for cryogenic service | |
| Determination of slip resistance of pedestrian surfaces - Methods of evaluation | |
| Domestic and non-domestic storage furniture - Test methods for the determination of strength, durability and stability | |
| Drilling and foundation equipment - Safety - Part 1: Common requirements | |
| Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering in soil or soil and rock mixture | |
| Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining | |
| Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD) | |
| Drilling and foundation equipment - Safety - Part 4: Foundation equipment | |
| Drilling and foundation equipment - Safety - Part 5: Diaphragm walling equipment | |
| Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment | |
| Drilling and foundation equipment - Safety - Part 7: Interchangeable auxiliary equipment | |
| e-Competence Framework (e-CF) - A common European Framework for ICT Professionals in all industry sectors - Part 1: Framework | |
| e-Competence Framework (e-CF) - A common European Framework for ICT Professionals in all sectors - Part 1: Framework | |
| Energy audits - Part 1: General requirements | |
| Energy audits - Part 2: Buildings | |
| Energy audits - Part 3: Processes | |
| Energy audits - Part 4: Transport | |
| Energy audits - Part 5: Competence of energy auditors | |
| Energy Efficiency and Savings Calculation, Top-down and Bottom-up Methods | |
| Energy efficiency benchmarking methodology | |
| Energy management systems - Requirements with guidance for use | |
| Enteral feeding catheters and enteral giving sets for single use and their connectors - Design and testing. | |
| Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 1: General requirements including calculation method | |
| Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 2: Kitchen ventilation hoods; design and safety requirements | |
| Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 3: Kitchen ventilation ceilings; Design and safety requirements | |
| Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 4: Air inlets and outlets; Design and safety requirements | |
| Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 5: Air duct; Design and dimensioning | |
| Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 6: Aerosol separators; Design and safety requirements | |
| Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 7: Installation and use of fixed fire suppression systems | |
| Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 8: Installations for treatment of aerosol; Requirements and testing | |
| European Learner Mobility - Achievement information (EuroLMAI) | |
| Evacuation Lighting in Road Tunnels | |
| Explosion diverters (Endorsed by AENOR in January of 2013.) | |
| Fertilizers - Determination of 1H-1,2,4-triazole in urea and in fertilizers containing urea - Method using high-performance liquid chromatography (HPLC) | |
| Fertilizers - Determination of chlorides in the absence of organic material | |
| Fertilizers - Determination of complexed micro-nutrient ions in fertilizers - Identification of lignosulfonates | |
| Fertilizers - Determination of magnesium by atomic absorption spectrometry | |
| Fertilizers - Determination of magnesium by complexometry | |
| Fertilizers - Determination of N-(2-nitrophenyl)pho sphoric triamide (2-NPT) in urea and fertilizers containing urea - Method using high-performance liquid chromatography (HPLC) | |
| Fertilizers - Determination of the sodium extracted by flame-emission spectrometry | |
| Fertilizers - Extraction and determination of elemental sulfur | |
| Fertilizers - Manganimetric determination of extracted calcium following precipitation in the form of oxalate | |
| Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 1: General requirements | |
| Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers | |
| Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre | |
| Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 4: Specific requirements for fabrics | |
| Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 5: Specific requirements for core materials | |
| Flameless explosion venting devices (Endorsed by AENOR in January of 2013.) | |
| Flexible sheets for waterproofing - Determination of emissivity | |
| Flexible sheets for waterproofing - Determination of the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing | |
| Food data - Structure and interchange format | |
| Foodstuffs - Determination of fumonisin B1 and fumonisin B2 in processed maize containing foods for infants and young children - HPLC method with immunoaffinity column cleanup and fluorescence detection after... | |
| Foodstuffs - Determination of lipophilic algal toxins (okadaic acid group toxins, yessotoxins, azaspiracids, pectenotoxins) in shellfish and shellfish products by LC-MS/MS | |
| Foodstuffs - Determination of sucralose - High performance liquid chromatographic method | |
| Founding - Compacted (vermicular) graphite cast irons | |
| Founding - Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications | |
| Furniture - Safety, strength and durability - Requirements and test methods for non-domestic seating | |
| Furniture - Strength, durability and safety - Requirements for non-domestic seating | |
| GENERIC SPECIFICATION: MODULAR ELECTRONIC UNITS (Endorsed by AENOR in November of 1996.) | |
| Glass in building - Safety in case of fire, fire resistance - Glass testing methodology for the purpose of classification | |
| Glass packaging - Screw finishes - Depressed threads | |
| Glass packaging - Screw finishes for pressure capsules - MCA 7,5 RF finish | |
| Glass packaging - Screw finishes for pressure capsules - Part 1: Returnable glass MCA 1 finish | |
| Glass packaging - Screw finishes for pressure capsules - Part 1: Returnable glass MCA 2 finish | |
| Glass packaging - Screw finishes for pressure capsules - Part 1: Returnable glass MCA 3 finish | |
| Glass packaging - Screw finishes for pressure capsules - Part 1: Returnable glass MCA 7,5 R finish | |
| Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 1 finish | |
| Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 2 finish | |
| Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 3 finish | |
| Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 7,5 R finish | |
| GS: MODULAR ELECTRONIC UNITS. (Endorsed by AENOR in September of 1996.) | |
| Hardware for furniture - Strength and durability of locking mechanisms | |
| Hardware performance sheet (HPS) - Identification and summary of test evidence to facilitate the inter-changeability of building hardware for application to fire resisting and/or smoke control doorsets and/or openable windows... | |
| Health and safety in welding and allied processes - Transparent welding curtains, strips and screens for arc welding processes | |
| Health and safety in welding and allied processes. Transparent welding curtains, strips and screens for arc welding processes. | |
| Health informatics - Representation of dedicated kinds of property in laboratory medicine | |
| Healthcare provision by chiropractors | |
| Heat pumps with electrically driven compressors - Testing and requirements for marking of domestic hot water units | |
| Heat pumps with electrically driven compressors - Testing, performance rating and requirements for marking of domestic hot water units. (Consolidated version) | |
| Heat pumps with electrically driven compressors - Testing, performance rating and requirements for marking of domestic hot water units | |
| Hyperbaric chambers - Specific requirements for fire extinguishing systems - Performance, installation and testing | |
| Imperfections in thermoplastics welded joints - Quality levels | |
| Industrial trucks - Safety requirements and verification - Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks | |
| Industrial trucks - Safety requirements and verification - Part 2: Supplementary requirements for self-propelled variable-reach trucks | |
| Industrial trucks - Safety requirements and verification - Part 3: Supplementary requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads (additional requirements to... | |
| Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks | |
| Inflation devices and accessories for inflatable consumer products - Part 1: Compatibility of valves and valve adapters | |
| Inflation devices and accessories for inflatable consumer products - Part 2: Safety requirements, durability, performance, compatibility and test methods of inflators | |
| Influence of metallic materials on water intended for human consumption - Determination of residual surface lead (Pb) - Extraction method | |
| Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of surface coatings with nickel layers - Long-term test method | |
| Influence of metallic materials on water intended for human consumption - Method to evaluate the passive behaviour of stainless steels and other passive alloys | |
| Influence of metallic materials on water intended for human consumption - Method to evaluate the passive behaviour of stainless steels | |
| Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 1: Context and Framework (Endorsed by Asociación Española de Normalización in March of 2019.)... | |
| Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 2: Location referencing (Endorsed by Asociación Española de Normalización in April of 2019.) | |
| Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 3: Situation publication (Endorsed by Asociación Española de Normalización in March of 2019.) | |
| Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 4: VMS publication (Endorsed by Asociación Española de Normalización in May of 2021.) | |
| Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 5: Measured and elaborated data publications (Endorsed by Asociación Española de Normalización in September... | |
| Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 7: Common data elements (Endorsed by Asociación Española de Normalización in March of 2019.)... | |
| Intelligent transport systems - eCall - Operating requirements for third party support | |
| Intelligent transport systems - eSafety - eCall high level application requirements (HLAP) (Endorsed by AENOR in November of 2011.) | |
| Intelligent transport systems - ESafety - eCall high level application requirements (HLAP) using GSM/UMTS circuit switched networks | |
| Intelligent transport systems - eSafety - eCall high level application requirements (HLAP) | |
| Intelligent transport systems - eSafety - Pan-European eCall operating requirements (Endorsed by AENOR in November of 2011.) | |
| Intelligent transport systems - eSafety - Pan-European eCall operating requirements | |
| Laboratory measurement of walking noise on floors | |
| Laminate floor coverings - Test method for the determination of micro-scratch resistance | |
| Leather - Raw bovine hides and skins - Description, presentation and preservation | |
| Leather - Requirements for the designation and description of leather in upholstery and automotive interior applications - Part 1: upholstery applications | |
| Leather - Requirements for the designation and description of leather in upholstery and automotive interior applications - Part 2: Automotive interior applications | |
| Leather - Requirements for the designation and description of leather in upholstery and automotive interior applications | |
| Leather - Terminology - Key definitions for the leather trade | |
| Leisure karts - Part 1: Safety requirements and test methods for karts | |
| Leisure karts - Part 2: Safety requirements for karting facilities | |
| Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods | |
| Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods | |
| Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Fixed range injection period, constant volume combustion chamber method | |
| Liquid petroleum products - Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol - Method by gas chromatography (O-FID) | |
| Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation method | |
| Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation test (RSSOT) | |
| Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography (O-FID) | |
| LIQUID PETROLEUM PRODUCTS. UNLEADED PETROL. DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT BY GAS CHROMATOGRAPHY (O-FID). | |
| LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase | |
| LPG equipment and accessories - Sealing caps and plugs for LPG cylinder and pressure vessel valves - Specification and testing | |
| Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements | |
| Management consultancy services | |
| Metadata for Learning Opportunities (MLO) - Advertising | |
| Method for Analysis of Allergens - Quantification of an extended list of 57 suspected allergens in ready to inject fragrance materials by gas chromatography mass spectrometry | |
| Methodology for calculation and declaration of energy consumption and GHG emissions of transport services (freight and passengers) | |
| Methods for analysis of allergens - Quantification of suspected fragrance allergens in consumer products - Step 1: GC analysis of ready-to-inject sample | |
| Mobile non-sewer-connected toilet cabins - Requirements of services and products relating to the deployment of cabins and sanitary products | |
| Motorcyclists' protective clothing against mechanical impact — Part 3: Motorcyclists' chest protectors - Requirements and test methods | |
| Motorcyclists' protective clothing against mechanical impact - Part 1: Motorcyclists' limb joint impact protectors - Requirements and test methods | |
| Motorcyclists' protective clothing against mechanical impact - Part 2: Motorcyclists' back protectors - Requirements and test methods | |
| Motorcyclists' protective clothing against mechanical impact - Part 4: Motorcyclists' inflatable protectors - Requirements and test methods | |
| MOTORCYCLISTS' PROTECTIVE CLOTHING AGAINST MECHANICAL IMPACT. PART 1: REQUIREMENTS AND TEST METHODS FOR IMPACT PROTECTORS. | |
| Natural stone test methods - Determination of resistance of marble to thermal and moisture cycles (Endorsed by AENOR in April of 2013.) | |
| Natural stone test methods - Determination of resistance of marble to thermal and moisture cycles (Endorsed by Asociación Española de Normalización in October of 2022.) | |
| Natural stone test methods - Determination of sensitivity to accidental staining | |
| Natural stone test methods - Determination of sensitivity to changes in appearance produced by thermal cycles | |
| Non destructive testing - Radiation methods - Computed tomography - Part 1: Terminology | |
| Non destructive testing - Radiation methods - Computed tomography - Part 2: Principle, equipment and samples | |
| Non destructive testing - Radiation methods - Computed Tomography - Part 3: Operation and interpretation | |
| Non destructive testing - Radiation methods - Computed tomography - Part 4: Qualification | |
| Non-destructive testing - Terminology - Terms used in ultrasonic testing with phased arrays | |
| Non-domestic storage furniture - Requirements for safety, strength, durability and stability | |
| Ophthalmic optics - Reference method for the testing of spectacle frames and sunglasses for nickel release | |
| Packaging - Flexible aluminium tubes - Test method to measure the deformation of the aluminium tube body (Guillotine test) | |
| Packaging - Flexible aluminium tubes - Test method to measure the force to pierce the membrane | |
| Packaging - Flexible laminate and plastic tubes - Test method to determine the adhesive strength of the membrane | |
| Packaging - Glass Packaging - Deep BVS finishes for still wines | |
| Packaging - Rigid plastic containers - Nomenclature of plastic finishes | |
| Packaging - Rigid plastic containers - PET finish 26,7 (lead 6,35) | |
| Packaging - Rigid plastic containers - PET finish 26,7 (lead 9,00) | |
| Packaging - Rigid plastic containers - PET finish 30/25 High (18,5) | |
| Packaging - Rigid plastic containers - PET finish 30/25 Low (16,8) | |
| Packaging - Rigid plastic containers - PET finish 38 | |
| Paddles and oars for recreational boats - Safety requirements and test methods | |
| Paints and varnishes - Determination of non-volatile-matter content and spreading rate of coil coating materials | |
| Paints and varnishes - Laboratory method for determination of release of regulated dangerous substances from coatings in intermittent contact with water | |
| Paints and varnishes - Laboratory method for determination of release of substances from coatings in intermittent contact with water | |
| Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product standard, performance characteristics - Fire resisting and/or smoke control characteristics | |
| Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Requirements and classification | |
| Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance to manual burglary attempts | |
| Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under dynamic loading | |
| Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under static loading | |
| Perfomance of reflecting surfaces for luminaires | |
| Petroleum industry and products - Determination of composition of refinery heating gas and calculation of carbon content and calorific value - Gas chromatography method | |
| Petroleum products - Determination of content of Benzo(a)pyrene (BaP) and selected polycyclic aromatic hydrocarbons (PAH) in extender oils - Procedure using double LC cleaning and GC/MS analysis (Endorsed by AENOR... | |
| Petroleum products and fat and oil derivatives - Determination of phosphorus content in fatty acid methyl esters (FAME) - Optical emission spectral analysis with inductively coupled plasma (ICP OES) | |
| Plastics and rubber machines - Reaction moulding machines - Part 1: Safety requirements for metering and mixing units | |
| Plastics and rubber machines - Reaction moulding machines - Part 2: Safety requirements for reaction moulding plant | |
| Plastics and rubber machines - Reaction moulding machines and plants - Safety requirements (Endorsed by Asociación Española de Normalización in November of 2019.) | |
| Plastics piping systems - Systems within the building structure - Mounting and fixing of components in the test apparatus to thermal attack by a single burning item | |
| Power operated pedestrian doorsets - Safety in use - Requirements and test methods | |
| Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their... | |
| Products used for treatment of water intended for human consumption - Natural zeolite | |
| Protective clothing - Gloves with protective effect for association football goal keepers | |
| Pumps - Rotodynamic pumps - Glandless circulators - Part 1: General requirements and procedures for testing and calculation of energy efficiency index (EEI) | |
| Pumps - Rotodynamic pumps - Glandless circulators - Part 2: Calculation of energy efficiency index (EEI) for standalone circulators | |
| Pumps - Rotodynamic pumps - Glandless circulators - Part 3: Energy efficiency index (EEI) for circulators integrated in products | |
| Pyrotechnic articles - Fireworks, category 4 - Part 1: Terminology | |
| Pyrotechnic articles - Fireworks, Category 4 - Part 2: Requirements | |
| Pyrotechnic articles - Fireworks, Category 4 - Part 3: Test methods | |
| Pyrotechnic articles - Fireworks, Category 4 - Part 4: Minimum labelling requirements and instructions for use | |
| Pyrotechnic articles - Other pyrotechnic articles - Cartridges for powder actuated tools | |
| Pyrotechnic articles - Other pyrotechnic articles - Ignition devices | |
| Pyrotechnic articles - Other pyrotechnic articles - Part 2: Requirements | |
| Pyrotechnic articles - Theatrical pyrotechnic articles - Part 1: Terminology | |
| Pyrotechnic articles - Theatrical pyrotechnic articles - Part 2: Categories of theatrical pyrotechnic articles | |
| Pyrotechnic articles - Theatrical pyrotechnic articles - Part 3: Requirements for construction and performance | |
| Pyrotechnic articles - Theatrical pyrotechnic articles - Part 4: Minimum labelling requirements and instructions for use | |
| Pyrotechnic articles - Theatrical pyrotechnic articles - Part 5: Test methods | |
| Pyrotechnics articles - Other pyrotechnic articles - Part 1: Terminology | |
| Pyrotechnics articles - Other pyrotechnic articles - Part 3: Categories and types | |
| Pyrotechnics articles - Other pyrotechnic articles - Part 4: Test methods | |
| Pyrotechnics articles - Other pyrotechnic articles - Part 5: Minimum labelling requirements and instructions for use | |
| Railway application - Testing for the acceptance of running characteristics of railway vehicles - Freight wagons - Conditions for dispensation of freight wagons with defined characteristics from on-track tests according... | |
| Railway applications - Automatic coupler - Performance requirements, specific interface geometry and test method | |
| Railway applications - Braking - Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock | |
| Railway applications - Braking systems of multiple unit trains - Part 1: Requirements and definitions | |
| Railway applications - Braking systems of multiple unit trains - Part 2: Test methods | |
| Railway applications - Design requirements for steps, handrails and associated access for staff - Part 1: Passenger vehicles, luggage vans and locomotives | |
| Railway applications - Design requirements for steps, handrails and associated access for staff - Part 1: Passenger vehicles, vans and locomotives | |
| Railway applications - Design requirements for steps, handrails and associated access for staff - Part 2: Freight wagons | |
| Railway applications - Driver’s cab - Part 3: Design of displays for heavy rail vehicles | |
| Railway applications - Driver's cab - Part 1: Anthropometric data and visibility | |
| Railway applications - Driver's cab - Part 2: Integration of displays, controls and indicators | |
| Railway applications - Driver's cab - Part 3: Design of displays | |
| Railway applications - Driver's cab - Part 4: Layout and access | |
| Railway applications - Driver's cab - Part 6: Integration of displays, controls and indicators for tram vehicles | |
| Railway applications - Driver's cab - Part 8: Tram vehicle layout and access | |
| Railway applications - Driver's cabs - Part 5: External visibility for tram vehicles | |
| Railway applications - Gangway systems between vehicles - Part 1: Main applications | |
| Railway applications - Gangway systems between vehicles - Part 2: Acoustic measurements | |
| Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics - Sound... | |
| Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics - Airborne... | |
| Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 3-1: Normalized railway noise spectrum... | |
| Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 3-2: Normalized railway noise spectrum... | |
| Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - Sound... | |
| Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - Airborne... | |
| Railway applications - Slack adjuster | |
| Railway applications - Testing for the acceptance of running characteristics of railway vehicles - Freight wagons - Conditions for dispensation of freight wagons with defined characteristics from on-track tests according... | |
| Railway applications - Track - Forged rail transitions | |
| Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics - Sound... | |
| Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics - Airborne... | |
| Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 3-1: Normalized railway noise spectrum... | |
| Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 3-2: Normalized railway noise spectrum... | |
| Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In... | |
| Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In... | |
| Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications | |
| Reference test method for release of nickel from those parts of spectacle frames and sunglasses intended to come into close and prolonged contact with the skin | |
| Refrigerating systems and heat pumps - Qualification of tightness of components and joints | |
| Ride-on, motorized vehicles intended for the transportation of persons and not intended for use on public roads - Single-track two-wheel motor vehicles - Safety requirements and test methods | |
| Road restraint systems - Validation and verification process for the use of virtual testing in crash testing against vehicle restraint system | |
| Rubber and plastics machines - Reaction moulding machines - Part 2: Safety requirements for reaction moulding plant. | |
| RUBBER AND PLASTICS MACHINES. REACTION MOULDING MACHINES. PART 1: SAFETY REQUIREMENTS FOR METERING AND MIXING UNITS. | |
| Rubber or plastic coated fabrics - Mechanical properties - Determination of the elongation under load and the residual deformation | |
| Rubber- or plastic-coated fabrics - Upholstery fabrics - Resistance to soiling | |
| Safety of Industrial Trucks - Dynamic tests for verification of lateral stability - Counterbalanced Trucks | |
| Sanitary tapware - Extractable outlets for sink and basin mixers - General technical specification | |
| Sanitary tapware - Extractable shower hoses for sanitary tapware for supply systems type 1 and type 2 - General technical specification | |
| Sawn timber - Appearance grading of softwoods - Part 1: European spruces, firs, pines and Douglas firs | |
| Sawn timber - Appearance grading of softwoods - Part 1: European spruces, firs, pines, Douglas firs and larches. | |
| SAWN TIMBER. APPEARANCE GRADING OF SOFTWOODS. PART 1: EUROPEAN SPRUCERS, FIRS, PINES AND DOUGLAS FIRS. | |
| SECTIONAL SPECIFICATION: CAPABILITY APPROVAL OF MANUFACTURERS OF PRINTED BOARD ASSEMBLIES OF ASSESSED QUALITY. (Endorsed by AENOR in July of 1998.) | |
| SECTIONAL SPECIFICATION: MICROWAVE MODULAR ELECTRONIC UNITS OF ASSESSED QUALITY. PART 1: CAPABILITY APPROVAL PROCEDURE (Endorsed by AENOR in July of 1998.) | |
| SECTIONAL SPECIFICATION: MICROWAVE MODULAR ELECTRONIC UNITS OF ASSESSED QUALITY. PART 2: INDEX OF TEST METHODS (Endorsed by AENOR in July of 1998.) | |
| Security of drinking water supply - Guidelines for risk and crisis management - Part 1: Crisis management | |
| Security of drinking water supply - Guidelines for risk and crisis management - Part 2: Risk management | |
| Sludge, treated biowaste and soil - Determination of adsorbable organically bound halogens (AOX) (Endorsed by AENOR in October of 2012.) | |
| Sludge, treated biowaste and soil - Determination of elements using inductively coupled plasma mass spectrometry (ICP-MS) (Endorsed by AENOR in December of 2016.) | |
| Sludge, treated biowaste and soil - Determination of elements using inductively coupled plasma optical emission spectrometry (ICP-OES) (Endorsed by AENOR in December of 2016.) | |
| Sludge, treated biowaste and soil - Determination of Kjeldahl nitrogen (Endorsed by AENOR in October of 2012.) | |
| Sludge, treated biowaste and soil - Determination of mercury - Part 1: Cold-vapour atomic absorption spectrometry (CV-AAS) (Endorsed by AENOR in December of 2016.) | |
| Sludge, treated biowaste and soil - Determination of mercury - Part 2: Cold-vapour atomic fluorescence spectrometry (CV-AFS) (Endorsed by AENOR in December of 2016.) | |
| Sludge, treated biowaste and soil - Determination of polychlorinated biphenyls (PCB) by gas chromatography with mass selective detection (GC-MS) and gas chromatography with electron-capture detection (GC-ECD) (Endorsed by AENOR in... | |
| Sludge, treated biowaste and soil - Determination of total nitrogen using dry combustion method (Endorsed by AENOR in October of 2012.) | |
| Sludge, treated biowaste and soil - Digestion of aqua regia soluble fractions of elements (Endorsed by AENOR in October of 2012.) | |
| Sludge, treated biowaste and soil - Digestion of nitric acid soluble fractions of elements (Endorsed by AENOR in October of 2012.) | |
| Sludge, treated biowaste and soil - Guidance for sample pretreatment | |
| Soil improvers and growing media - Determination of plant response - Part 1: Pot growth test with Chinese cabbage | |
| Soil improvers and growing media - Determination of plant response - Part 2: Petri dish test using cress | |
| Soil improvers and growing media - Determination of the aerobic biological activity - Part 1: Oxygen uptake rate (OUR) | |
| Soil improvers and growing media - Determination of the aerobic biological activity - Part 2: Self heating test for compost | |
| Soil, treated biowaste and sludge - Determination of adsorbed organically bound halogens (AOX) (Endorsed by Asociación Española de Normalización in February of 2022.) | |
| Soil, treated biowaste and sludge - Determination of dioxins and furans and dioxin-like polychlorinated biphenyls by gas chromatography with high resolution mass selective detection (HR GC-MS) (Endorsed by Asociación Española... | |
| Soil, treated biowaste and sludge - Determination of polychlorinated biphenyls (PCB) by gas chromatography with mass selective detection (GC-MS) and gas chromatography with electron-capture detection (GC-ECD) (Endorsed by Asociación Española... | |
| Soil, treated biowaste and sludge - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC) (Endorsed by Asociación Española de Normalización in July... | |
| Solid biofuels - Determination of length and diameter of pellets | |
| Solid biofuels - Determination of particle size distribution of disintegrated pellets | |
| SRYOGENIC VESSELS - VALVES FOR CRYOGENIC SERVICE | |
| STERILE DRAINAGE CATHETERS AND ACCESSORY DEVICES FOR SINGLE USE. | |
| STERILE ENTERAL FEEDING CATHETERS AND GIVING SETS FOR SINGLE USE. | |
| STERILE URETHRAL CATHETERS FOR SINGLE USE. | |
| Sterile urethral catheters for single use | |
| Sustainability and greenhouse gas emission saving criteria for biomass for energy applications - Principles, criteria, indicators and verifiers - Part 1: Terminology (Endorsed by Asociación Española de Normalización in December... | |
| Sustainability and greenhouse gas emission saving criteria for biomass for energy applications - Principles, criteria, indicators and verifiers - Part 3: Sustainability criteria related to environmental aspects (Endorsed by Asociación... | |
| Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 1: Terminology (Endorsed by Asociación Española de Normalización in February... | |
| Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 1: Terminology | |
| Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 3: Biodiversity and environmental aspects related to nature protection purposes... | |
| Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 4: Calculation methods of the greenhouse gas emission balance using... | |
| Sustainability of construction works - Assessment of environmental performance of buildings - Calculation method | |
| Symbol for use in the labelling of medical devices - Requirements for labelling of medical devices containing phthalates | |
| Tanks for the transport of dangerous goods - Service equipment - Cap for the adaptor for bottom loading and unloading | |
| Tanks for the transport of dangerous goods - Service equipment - Footvalve sizes other than 100 mm dia (nom) | |
| Testing of ceramic and basic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by inductively coupled plasma optical emission spectrometry (ICP OES)... | |
| Testing of ceramic raw and basic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by OES by DC arc excitation (Endorsed by... | |
| Testing of ceramic raw materials and ceramic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by inductively coupled plasma optical emission spectrometry... | |
| Testing of ceramic raw materials and ceramic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by optical emission spectrometry by direct current... | |
| TEXTILES AND TEXTILE PRODUCTS - BURNING BEHAVIOUR OF INDUSTRIAL AND TECHNICAL TEXTILES - PROCEDURE TO DETERMINE THE FLAME SPREAD OF VERTICALLY ORIENTED SPECIMENS | |
| Textiles and textile products - Burning behaviour of industrial and technical textiles - Procedure to determine the ignitability of vertically oriented specimens | |
| Thermal and/ or sound insulating products in building construction - Bound EPS ballastings - Part 2: Processing of the factory premixed EPS dry plaster | |
| Thermal and/or sound insulating products in building construction - Bound EPS ballastings - Part 1: Requirements for factory premixed EPS dry plaster | |
| Thermal insulating products for building applications - Determination of compressive creep | |
| Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions | |
| Thermal insulating products for building applications - Determination of dimensional short term water absorption by partial immersion | |
| Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23 °C/50 % relative humidity) | |
| Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23°C/50% relative humidity) | |
| Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions | |
| Thermal insulating products for building applications - Determination of short term water absorption by partial immersion | |
| Thermal insulating products for building applications - Determination of tensile strength parallel to faces | |
| Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces | |
| Thermal insulating products for building applications - Determination of the apparent density | |
| THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS. DETERMINATION OF COMPRESSIVE CREEP. | |
| THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS. DETERMINATION OF DIMENSIONAL STABILITY UNDER CONSTANT NORMAL LABORATORY CONDITIONS (23 ºC/50% RELATIVE HUMIDITY). | |
| THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS. DETERMINATION OF DIMENSIONAL STABILITY UNDER SPECIFIED TEMPERATURE AND HUMIDITY CONDITIONS. | |
| THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS. DETERMINATION OF SHORT TERM WATER ABSORPTION BY PARTIAL IMMERSION. | |
| THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS. DETERMINATION OF TENSILE STRENGTH OF TENSILE STRENGTH PERPENDICULAR TO FACES. | |
| THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS. DETERMINATION OF TENSILE STRENGTH PARALLEL TO FACES. | |
| THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS. DETERMINATION OF THE APPARENT DENSITY. | |
| THERMAL INSULATING PRODUCTS FOR BUILDING. DETERMINATION OF DEFORMATION UNDER SPECIFIED COMPRESSIVE LOAD AND TEMPERATURE CONDITIONS. | |
| Thermal insulation for buildings - Reflective insulation products - Determination of the declared thermal performance | |
| Thermal insulation products for buildings - Factory made products of polyethylene foam (PEF) - Specification | |
| Transportation loads - Measurement and evaluation of climatic and other loads - Data acquisition and general requirements for measuring equipment | |
| Tunnelling machinery - Safety requirements | |
| Value management - Functional expression of the need and functional performance specification - Requirements for expressing and validating the need to be satisfied within the process of purchasing or obtaining... | |
| Ventilation for buildings - Measurement of air flow rates on site - Methods | |
| Ventilation for buildings - Measurement of air flows on site - Methods | |
| WATER ANALYSIS. DETERMINATION OF THE THRESHOLD ODOUR NUMBER (TON) AND THRESHOLD FLAVOUR NUMBER (TFN). | |
| Water quality - Determination of the threshold odour number (TON) and threshold flavour number (TFN) | |
| Water quality - Guidance on pro-rata Multi-Habitat sampling of benthic macro-invertebrates from wadeable rivers | |
| Water quality - Guidance on quantitative and qualitative investigations of marine phytoplankton | |
| Water quality - Guidance on the use of in vivo absorption techniques for the estimation of chlorophyll-a concentration in marine and fresh water samples | |
| Water quality - Guidance standard for designing and selecting taxonomic keys | |
| Water quality - Guidance standard on assessing the hydromorphological features of lakes | |
| Water quality - Guidance standard on interlaboratory comparison studies for ecological assessment | |
| Water quality - Visual seabed surveys using remotely operated and/or towed observation gear for collection of environmental data | |
| WELDING CONSUMABLES. COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF STAINLESS AND HEAT RESSISTING STEELS. CLASSIFICATION. | |
| WELDING CONSUMABLES. COVERED ELECTRODES FOR MANUAL METAL ARC. WELDING OF CREEP-RESISTING STEELS. CLASSIFICATION. | |
| WELDING CONSUMABLES. TEST METHODS. PART 2: PREPARATION OF TEST PIECE FOR SINGLE-RUN AND TWO-RUN TECHNIQUE TEST SPECIMENS IN STEEL. | |
| WELDING CONSUMABLES. TEST METHODS. PART 3: TESTING OF POSITIONAL CAPABILITY OF WELDING CONSUMABLES IN A FILLET WELD. |
| << Prev | Next >> |