CSA Group Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| A general definition of initialization is that it begins at separation of the spacecraft (SC) from the launcher. In some cases, a more exact definition will be that initialization begins... | |
| A specimen of the textile (coloured textiles which change in colour on exposure to light but which virtually return to their original shade when stored in the dark) is exposed... | |
| A specimen of the textile (textiles from wool of all kinds), treated with the chemical solution, is placed in contact with specified adjacent fabrics and subjected to steam pressing. A... | |
| A specimen of the textile (textiles in all kinds and in all forms) in contact with adjacent fabrics is milled in acid solution, rinsed and dried (action of dilute and... | |
| A specimen of the textile (textiles in all kinds and in all forms) in contact with adjacent fabrics is milled in solutions of acetic and/or sulfuric acid, rinsed and dried. | |
| A specimen of the textile (textiles of all kinds and in all forms) between specified undyed cloths is rolled around a glass rod and treated with boiling sodium carbonate solution... | |
| A specimen of the textile (textiles of all kinds and in all forms) in contact with adjacent fabrics is rolled around a glass rod, treated with slightly acidified hot water... | |
| A specimen of the textile (textiles of all kinds and in all forms) in contact with specified adjacent fabrics is rolled into a cylinder and placed in the neck of... | |
| A specimen of the textile (textiles of all kinds and in all forms) is exposed to the action of gaseous formaldehyde in a closed container. The change in colour of... | |
| A specimen of the textile (wool textiles in all forms) is treated in a formic acid buffer solution to which solutions of sodium dichloroisocyanurate and sodium hydrogen sulfite are added... | |
| A specimen of the textile is wrapped around a perforated cylinder, and steam passed through it for 15 min. The change in colour of the dried specimen is assessed with... | |
| Applicable to the analysis of potable waters, ground waters, and lightly polluted surface and sea waters. Determines filterable and acid-soluble aluminium. Includes low range determination up to 100 µg/l Al... | |
| Applies to tapes braided from all types of yarn or roving used as reinforcements in plastics. Deals with designation, characteristics to be specified, defects, sampling and selection of test pieces,... | |
| Applies to the multi-pole connector and the positions of antenna sockets. Specifies the contact allocation of the connector. The connector is both for permanent connection of the car radio to... | |
| Cancels and replaces the third edition (1987) and amendment 1 (1993). Specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms... | |
| Cancels and replaces the third edition (1988). Specifies a method intended for determining the resistance of the colour of textiles of all kinds, except loose fibres, to the action of... | |
| Contains a method for determining the moisture expansion of ceramic tiles by immersing a reheated tile into boiling water and measurement the proportional change in length. | |
| Contains a minor number of amendments. | |
| Contains a technical specification (characteristics, methods for checks and tests, quality assurance and acceptance conditions) for spherical plain bearings in corrosion-resisting steel with self-lubricating liner. | |
| Contains minor amendments in subclause 4.2 and subclause 5.1. | |
| Contains performance requirements of multi-pole connectors for car radios in accordance with ISO 10487-1. | |
| Corrects a numerical value in figure A.1. | |
| Covers the construction and use of judgement scales for use in providing reliable and comparative data on the subjective aspects of thermal comfort or thermal stress. | |
| Defines a test method for determining the crazing resistance of all glazed ceramic tiles except when the crazing is an inherent decorative feature of the product. | |
| Defines terms in English and French. | |
| Defines terms used to describe the appearance of the visible surfaces of tooth flanks or the damage that can be observed on gears. Causes and preventive measures are not discussed. | |
| Defines the performance requirements of a retrieval device mounted on an earth-moving machine. Contains requirements for verification. | |
| Defines the working width as well as other terms which relate to the main dimensions of the working widths of weaving machines. Applicable to weaving machines with or without shuttles,... | |
| Describes a method for carrying out quality control of production batches of the blue wool reference materials 1 to 7 which are to be used in the appropriate parts of... | |
| Describes a method for determining the resistance of the colour of textiles in all forms to manufacturing operation designed to remove vegetable impurities by treatment with the cited chemical at... | |
| Describes a method for determining the resistance of the colour of textiles of all kinds, except loose fibre, to the action of soap solutions such as those used in degumming... | |
| Describes a method for determining the resistance of the colour of textiles to the action of concentrated solutions of sodium hydroxide. The method is mainly applicable to cotton and to... | |
| Describes a method for the determination of lead and cadmium given off by the glaze of ceramic tiles. They are placed in an acetic acid solution and the amount of... | |
| Describes a method for the determination of solubility of water-soluble dyes at 25 °C in aqueous solution without previous heating. The method is not intended to measure absolute solubility. | |
| Describes a method for the determination of the alkali reserve of papers and boards. Intended for products that contain alkaline pigments or other alkaline material, added in order to improve... | |
| Describes a method for the determination of the application solubility of water-soluble dyes in the range 40 °C to 90 °C and of their solution stability. The method is not... | |
| Describes a method for the determination of the dispersibility of disperse dyes by means of filtering time and filter residue. This test method is used for determining the degree of... | |
| Describes a method for the determination of the dusting behaviour of dyes. | |
| Describes a method for the determination of the solubility and the solution stability of reactive dyes for use in batchwise and continuous dyeing processes in the presence of electrolytes. | |
| Describes a method for the determination of the ultimate biodegradability by aerobic microorganisms of particular poorly water-soluble organic compounds at a given concentration. | |
| Describes a test method for determining the inhibitory effect of surface, ground and waste water on Pseudomonas putida growth. Not suitable for highly coloured samples or samples containing undissolved or... | |
| Describes the forms of printed images and the sizes of alphanumeric characters as well as the signs and graphical symbols (OCR-A) intended for optical character reading according to ISO 646-1973. | |
| Describes the grey scale for determining changes in colour of textiles in colour fastness tests, and its use. A precise colorimetric specification of the scale is given as a permanent... | |
| Describes the grey scale for determining staining of adjacent fabrics in colour fastness tests, and its use. A precise colorimetric specification of the scale is given as a permanent record... | |
| Describes the principles and methods for the expression of results of performance tests on sizing equipment used in coal preparation, and includes methods for the evaluation of performance parameters. Performance... | |
| Describes the procedures designed to produce an analysis sample representative for each batch of soft solder in the consignment in the folowing details: unit of product, selection of the batch... | |
| Establishes a graph format used to develop diagrams depicting chipbreaker indexable insert performance. Establishes and codes classification zones. Does not serve as a specific guide to the practical application of... | |
| Establishes general requirements for undyed multifibre adjacent fabrics which may be used for the assessment of staining in colour fastness test procedures. These adjacent fabrics exhibit standardized staining properties. Each... | |
| Establishes the principles and general rules for the use of steel materials and design of steel structures in buildings. It is also applicable to bridges, civil engineering and related structures,... | |
| Establishes the values of multimodules for horizontal coordinating dimensions for use in modular coordination of buildings. Applies to the design and construction of buildings of all types in accordance with... | |
| Gives a classification of containment enclosures according to leak tightness and specifies methods for checking this tightness for the following tests: manufacturing test at the factory; acceptance test at the... | |
| Gives a method for determining the resistance to surface abrasion of all glazed ceramic tiles used for floor covering. | |
| Indicates the forms of printed images and the sizes of alphanumeric characters as well as the sings and graphical symbols (OCR-B-character set) intended for optical character reading according to ISO... | |
| Intended for the determination of the 1/1 standard depth of a dyeing on any textile material by a colorimetric method which is a permitted alternative to the visual method described... | |
| Intended for the determination of the left and right side of weaving looms. To determine the side of weaving loom the observer looks against the chain let-off directions. | |
| ISO 10362-2:2013 specifies the use of the Karl Fischer method for the determination of water in cigarette smoke condensates. The smoking of cigarettes and collection of mainstream smoke are normally... | |
| ISO 10364:2015 specifies methods for determining the pot life of multi-part adhesives in order to be able to determine whether the pot life conforms to the minimum specified working life... | |
| ISO 10366-2:2003 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of MABS moulding and extrusion materials. Requirements for handling... | |
| ISO 10368:2006 establishes the information and interfaces required to permit complying central monitoring and control systems employed by one carrier or terminal to interface and communicate with complying remote communication... | |
| ISO 10370:2014 specifies a method for the determination of the amount of carbon residue, in the range 0,10 % (m/m) to 30,0 % (m/m), left after evaporation and pyrolysis of... | |
| ISO 10376:2011 describes the procedure for determining the fines mass fraction of all kinds of pulp by means of a perforated metal plate or a single-screen fibre classifier (dynamic drainage... | |
| ISO 10377:2013 provides practical guidance to suppliers on assessing and managing the safety of consumer products, including effective documentation of risk assessment and risk management to meet applicable requirements. ISO... | |
| ISO 10378:2016 specifies a fire assay gravimetric and flame atomic absorption spectrometric method for the determination of the mass fraction of gold and silver in copper, lead, and zinc sulfide... | |
| ISO 10380:2012 specifies the minimum requirements for the design, manufacture, testing and installation of corrugated metal hose and metal hose assemblies. | |
| ISO 10381-1:2002 sets out the general principles to be applied in the design of sampling programmes for the purpose of characterizing and controlling soil quality and identifying sources and effects... | |
| ISO 10381-4:2003 describes the sampling of soils of natural and near-natural sites; areas used for agriculture (arable and pasture sites); areas used for horticulture (including domestic gardens, allotments); areas used... | |
| ISO 10381-5:2005 gives guidance on the procedure for the investigation of urban and industrial sites, where either it is known that soil contamination is present, or the presence of soil... | |
| ISO 10381-8:2006 defines the methods that should be applied when sampling soil from stockpiles. ISO 10381-8:2006 only includes the sampling of the soil material itself, i.e. the solid phase. The... | |
| ISO 10382:2002 specifies a method for quantitative determination of seven polychlorinated biphenyls and seventeen organochlorine pesticides in soil. ISO 10382:2002 is applicable to all types of soil. Under the conditions... | |
| ISO 10383:2012 specifies a universal method of identifying exchanges, trading platforms, regulated or non-regulated markets and trade reporting facilities as sources of prices and related information in order to facilitate... | |
| ISO 10384:2012 applies to hot-rolled carbon steel sheet as defined by chemical composition. The product is generally used in the heat-treated condition after hot or cold working, press forming or... | |
| ISO 10390:2005 specifies an instrumental method for the routine determination of pH using a glass electrode in a 1:5 (volume fraction) suspension of soil in water (pH in H2... | |
| ISO 10392:2011 specifies methods for determining the location of the centre of gravity (CG) of a road vehicle, as defined in ISO 3833. A method for determining the coordinates of... | |
| ISO 10393:2013 provides practical guidance to suppliers on consumer product recalls and other corrective actions after the product has left the manufacturing facility. Other corrective actions include, but are not... | |
| ISO 10396:2007 specifies procedures and equipment that will permit, within certain limits, representative sampling for the automated determination of gas concentrations of effluent gas streams. The application is limited to... | |
| ISO 10399:2017 specifies a procedure for determining whether a perceptible sensory difference or similarity exists between samples of two products. The method is a forced-choice procedure. The method is applicable... | |
| ISO 10406-1:2014 specifies test methods applicable to fibre-reinforced polymer (FRP) bars and grids as reinforcements or pre-stressing tendons in concrete. | |
| ISO 10406-2:2015 specifies test methods applicable to fibre-reinforced polymer (FRP) sheets for the upgrading of concrete members. | |
| ISO 10407-2:2008 specifies the required inspection for each level of inspection and procedures for the inspection and testing of used drill-stem elements. For the purpose of ISO 10407-2:2008, drill stem... | |
| ISO 10414-1:2008 provides standard procedures for determining the following characteristics of water-based drilling fluids: drilling fluid density (mud weight), viscosity and gel strength, filtration, water, oil and solids contents, sand... | |
| ISO 10414-2:2011 provides standard procedures for determining the following characteristics of oil-based drilling fluids: drilling fluid density (mud weight); viscosity and gel strength; filtration; oil, water and solids concentrations; alkalinity,... | |
| ISO 10416:2008 provides procedures for the laboratory testing of both drilling-fluid materials and drilling-fluid physical, chemical and performance properties. It is applicable to both water-based and oil-based drilling fluids, as... | |
| ISO 10417:2004 establishes requirements and provides guidelines for configuration, installation, test, operation and documentation of subsurface safety valve (SSSV) systems. In addition, ISO 10417:2004 establishes requirements and provides guidelines for... | |
| ISO 10418:2003 provides objectives, functional requirements and guidelines for techniques for the analysis, design and testing of surface process safety systems for offshore installations for the recovery of hydrocarbon resources. | |
| ISO 10424-1:2004 specifies requirements for the following drill stem elements: upper and lower kelly valves; square and hexagonal kellys; drill stem subs; standard steel and non-magnetic drill collars; drilling and... | |
| ISO 10424-2:2007 specifies requirements on rotary shouldered connections for use in petroleum and natural gas industries, including dimensional requirements on threads and thread gauges, stipulations on gauging practice, gauge specifications,... | |
| ISO 10425:2003 specifies the minimum requirements and terms of acceptance for the manufacture and testing of steel wire ropes not exceeding rope grade 2 160 for the petroleum and natural... | |
| ISO 10426-1:2009 specifies requirements and gives recommendations for six classes of well cements, including their chemical and physical requirements and procedures for physical testing. ISO 10426-1:2009 is applicable to well... | |
| ISO 10426-2:2003 specifies requirements and gives recommendations for the testing of cement slurries and related materials under simulated well conditions. | |
| ISO 10426-3:2003 provides procedures for testing well cements and cement blends for use in the petroleum and natural gas industries in a deepwater environment. | |
| ISO 10426-4:2004 defines the methods for the generation and testing of foamed cement slurries and their corresponding unfoamed base cement slurries at atmospheric pressure. | |
| ISO 10426-5:2004 provides the methods for the testing of well cement formulations to determine the dimension changes during the curing process (cement hydration) at atmospheric pressure only. This is a... | |
| ISO 10426-6:2008 specifies requirements and provides test methods for the determination of static gel strength of cement slurries and related materials under simulated well conditions. | |
| ISO 10427-2:2004 provides calculations for determining centralizer spacing, based on centralizer performance and desired standoff, in deviated and dogleg holes in wells for the petroleum and natural gas industries. It... | |
| ISO 10427-3:2003 describes testing practices to evaluate the performance of cementing float equipment for the petroleum and natural gas industries. ISO 10427-3:2003 is applicable to float equipment that will be... | |
| ISO 1043-1:2011 defines abbreviated terms for the basic polymers used in plastics, symbols for components of these terms, and symbols for special characteristics of plastics. It includes only those abbreviated... | |
| ISO 1043-2:2011 specifies uniform symbols for terms referring to fillers and reinforcing materials. It includes only those symbols that have come into established use, and its main aim is both... | |
| ISO 1043-3:2016 provides uniform symbols for components of terms relating to plasticizers to form abbreviated terms. It includes, in general, only those abbreviated terms that have come into established use. | |
| ISO 10432:2004 provides the minimum acceptable requirements for subsurface safety valves (SSSVs). It covers subsurface safety valves including all components that establish tolerances and/or clearances which may affect performance or... | |
| ISO 10434:2004 specifies the requirements for a heavy-duty series of bolted bonnet steel gate valves for petroleum refinery and related applications where corrosion, erosion and other service conditions would indicate... | |
| ISO 10437:2003 specifies requirements and gives recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of special-purpose steam turbines. It also covers the related lube-oil systems, instrumentation,... | |
| ISO 10438-1:2007 specifies general requirements for lubrication systems, oil-type shaft-sealing systems, dry-gas face-type shaft-sealing systems and control-oil systems for general- or special-purpose applications. General-purpose applications are limited to lubrication systems. | |
| ISO 10438-2:2007, in conjunction with ISO 10438-1, specifies requirements for oil systems for special-purpose applications. These oil systems can provide lubrication oil, seal oil or both. These systems can serve... | |
| ISO 10438-3:2007, in conjunction with ISO 10438-1, specifies requirements for oil systems for general-purpose applications. These oil systems can provide lubrication oil, but not seal oil and can serve equipment... | |
| ISO 10438-4:2007 in conjunction with ISO 10438-1 specifies requirements for support systems for self-acting gas seals (dry gas seals), for example as described in ISO 10439 and ISO 10440-1. These... | |
| ISO 10439 specifies minimum requirements and gives recommendations for axial compressors, single-shaft, and integrally geared process centrifugal compressors, and expander-compressors for special purpose applications that handle gas or process air... | |
| ISO 10439-2:2015 specifies minimum requirements and gives recommendations for axial compressors, single-shaft, and integrally geared process centrifugal compressors and expander-compressors for special purpose applications that handle gas or process air... | |
| ISO 10439-3:2015 specifies minimum requirements and gives recommendations for axial compressors, single-shaft and integrally geared process centrifugal compressors, and expander-compressors for special purpose applications that handle gas or process air... | |
| ISO 10439-4:2015 specifies minimum requirements and gives recommendations for axial compressors, single-shaft, and integrally geared process centrifugal compressors and expander-compressors for special purpose applications that handle gas or process air... | |
| ISO 10440-1:2007 specifies requirements for dry and oil-flooded, helical-lobe rotary compressors used for vacuum or pressure or both in petroleum, petrochemical, and gas industry services. It is intended for compressors... | |
| ISO 10441-2007 specifies the requirements for couplings for the transmission of power between the rotating shafts of two machines in special-purpose applications in the petroleum, petrochemical and natural gas industries. | |
| ISO 10442:2002 specifies requirements and gives recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of constant-speed, packaged, integrally geared centrifugal air compressors, including their accessories, for... | |
| ISO 10447:2015 specifies the procedures and recommended tooling to be used for peel and chisel testing of resistance spot and projection welds. ISO 10447:2015 applies to welds made in two... | |
| ISO 10450-2:2003 specifies a rapid method for the determination of trace amounts of phosphorus (less than or equal to 40 mg/kg) in crude or refined animal and vegetable fats and... | |
| ISO 10451:2010 specifies requirements for the contents of a technical file to demonstrate the fulfilment of regulatory requirements for a dental implant and any prefabricated part thereof that remains in... | |
| ISO 10456:2007 specifies methods for the determination of declared and design thermal values for thermally homogeneous building materials and products, together with procedures to convert values obtained under one set... | |
| ISO 10462:2013 specifies requirements for the periodic inspection of acetylene cylinders as required for the transport of dangerous goods and for maintenance in connection with periodic inspection. It applies to... | |
| ISO 10464:2004 specifies the intervals and inspection and testing procedures for the periodic inspection of refillable welded steel dedicated LPG cylinders of water capacity from 0,5 l up to and... | |
| ISO 10469:2006 specifies an electrogravimetric method for the determination of the mass fraction of copper in copper sulfide concentrates in the range 15 % to 50 %. | |
| ISO 10470:2004 provides a chart which lists the main five different categories of defects which are considered to be potentially present in green coffee as marketed throughout the world, whatever... | |
| ISO 10474:2013 defines the different types of inspection documents supplied to the purchaser, in accordance with the requirements of the order, for the delivery of steel products. ISO 10474:2013 is... | |
| ISO 10483-1:2004 specifies the minimum requirements for high-side intelligent power switches (HSIPS) installed on road vehicles with 12 V or 24 V nominal supply voltage and intended primarily for automotive... | |
| ISO 10494:2018 specifies methods for measuring the noise emission of a turbine or turbine set under steady-state operating conditions. It specifies methods for measuring the sound pressure levels on a... | |
| ISO 10497:2010 specifies fire type-testing requirements and a fire type-test method for confirming the pressure-containing capability of a valve under pressure during and after the fire test. It is not... | |
| ISO 10498:2004 describes an ultraviolet fluorescence method for sampling and determining sulfur dioxide (SO2) concentrations in the ambient air using automatic analysers. ISO 10498:2004 is applicable to the... | |
| ISO 104:2015 specifies preferred boundary dimensions for single-direction and double-direction thrust bearings with flat back faces. In addition, it gives the minimum bore diameters of housing washers and maximum outside... | |
| ISO 105-A01:2010 provides general information about the methods for testing colour fastness of textiles for the guidance of users. The uses and limitations of the methods are pointed out, several... | |
| ISO 105-B01:2014 specifies a method intended for determining the resistance of the colour of textiles of all kinds and in all forms to the action of daylight. This method allows... | |
| ISO 105-B02:2014 specifies a method intended for determining the effect on the colour of textiles of all kinds and in all forms to the action of an artificial light source... | |
| ISO 105-B03:2017 specifies a method intended for determining the resistance of the colour of textiles of all kinds except loose fibres to the action of weather as determined by outdoor... | |
| ISO 105-B07:2009 specifies a method for determining the resistance of the colour of textiles, of all kinds and in all forms, to the combined effect of wetting with acid or... | |
| ISO 105-B10:2011 specifies a procedure for exposing textiles to artificial weathering in xenon-arc apparatus, including the action of liquid water and water vapour, in order to determine the weather resistance... | |
| ISO 105-C06:2010 specifies methods intended for determining the resistance of the colour of textiles of all kinds and in all forms to domestic or commercial laundering procedures used for normal... | |
| ISO 105-C08:2010 specifies methods for determining the resistance of the colour of textiles of all kinds and in all forms to domestic or commercial laundering procedures used for normal household... | |
| ISO 105-C10:2006 specifies five methods intended for determining the resistance of the colour of textiles of all kinds and in all forms to washing procedures, from mild to severe, used... | |
| ISO 105-C12:2004 specifies methods for determining the resistance of the colour of textiles of all kinds exposed to all forms of industrial laundering procedures. | |
| ISO 105-D01:2010 specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to drycleaning using perchloroethylene solvent. This method is neither... | |
| ISO 105-D02:2016 specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms, except loose fibre, to the combined action of rubbing... | |
| ISO 105-E01:2013 specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to immersion in water. | |
| ISO 105-E02:2013 specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to immersion in sea water. | |
| ISO 105-E03:2010 specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to the action of active chlorine in concentrations such... | |
| ISO 105-E04:2013 specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to the action of human perspiration. | |
| ISO 105-E05:2010 specifies a method for determining the resistance of the colour of textiles of all kinds, and in all forms, to the action of dilute solutions of organic and... | |
| ISO 105-E06:2006 specifies a method for determining the resistance of the colour of textiles of all kinds, and in all forms, to the action of dilute alkaline solutions. Three tests... | |
| ISO 105-E07:2010 specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to spotting by water. | |
| ISO 105-E09:2010 specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to the action of boiling water. It is mainly... | |
| ISO 105-E12:2010 specifies a method for determining the resistance of the colour of wool and part-wool textiles to the action of soap and sodium carbonate solutions used in alkaline milling... | |
| ISO 105-E16:2006 describes a method for assessing the effect of water spotting on upholstery fabrics of all kinds, including natural, bleached, dyed and printed fabrics. The method is suitable for... | |
| ISO 105-F02:2009 specifies an undyed cotton (and an undyed viscose) adjacent fabric which may be used for the assessment of staining in colour fastness tests. The staining properties of the... | |
| ISO 105-F09:2009 specifies a cotton rubbing cloth which can be used for the assessment of staining in colour fastness to rubbing tests. The staining properties of the cotton rubbing cloth... | |
| ISO 105-G01:2016 specifies two methods for determining the resistance of the colour of textiles of all kinds and in all forms to the action of nitrogen oxides produced during combustion... | |
| ISO 105-G04:2016 specifies a method for determining the resistance of the colour of textiles to the action of nitrogen oxide in the atmosphere at elevated temperatures and high relative humidities. | |
| ISO 105-J03:2009 provides a method of calculating the colour difference between two specimens of the same material, measured under the same conditions, such that the numerical value ∆Ecmc(l:c)... | |
| ISO 105-J05:2007 provides a colorimetric method for calculating an estimate of the magnitude (and optionally the direction) of the change in the perceived colour of a textile specimen when the... | |
| ISO 105-P02 specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms, to the action of steam-pleating processes. Three tests differing... | |
| ISO 105-X12:2016 specifies a method for determining the resistance of the colour of textiles of all kinds, including textile floor coverings and other pile fabrics, to rubbing off and staining... | |
| ISO 105-X16:2016 specifies a method for determining the resistance of the colour of textiles to rubbing off and staining other materials where the singling out of areas smaller than possible... | |
| ISO 105-X18:2007 specifies a method intended for assessment of the potential to phenolic yellowing of textile materials. The method is specific to phenolic yellowing and does not cover the many... | |
| ISO 10502:2012 specifies requirements for polytetrafluoroethyl ene (PTFE) hose assemblies for use in aircraft hydraulic, fuel and lubricating oil systems at temperatures between -55 °C (-67 °F) and 232 °C... | |
| ISO 10504:2013 describes a high-performance liquid chromatographic (HPLC) method for measuring the composition of dextrose solutions, glucose syrups, fructose-containing syrups, hydrogenated glucose syrups, sorbitol, mannitol and maltitol. The constituents are... | |
| ISO 10505:2009 describes a method for determining the intrinsic root mean square granularity (rms‑granularity) of photographic films. Intrinsic rms-granularity refers to those density fluctuations produced solely by the distribution of... | |
| ISO 10508:2006 gives guidance for the classification and design of hot and cold water pressure systems which use plastics pipes and plastics or metal fittings. It establishes a classification system... | |
| ISO 10510:2011 specifies the requirements for tapping screws and plain washer assemblies with spaced threads from ST2,2 to ST9,5 inclusive, flat seating heads and mechanical properties as specified in ISO... | |
| ISO 10511:2012 specifies the characteristics of prevailing torque type hexagon thin nuts (with non-metallic insert) with thread from M3 up to and including M36, in product grade A for threads... | |
| ISO 10512:2012 specifies the characteristics of prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread with nominal thread diameters, D, from 8 mm up to... | |
| ISO 10513:2012 specifies the characteristics of prevailing torque type all-metal hexagon high nuts with metric fine pitch thread with nominal thread diameters, D, from 8 mm up to and including... | |
| ISO 10517:2009 specifies safety requirements and their verification for the design and construction of hand-held, integrally-driven petrol combustion engine hedge trimmers designed to be used by a single operator for... | |
| ISO 10519:2015 specifies a spectrometric method for the determination of the chlorophyll content of rapeseed. It is not applicable to the determination of chlorophyll in oils. | |
| ISO 10521-1:2006 specifies methods of determining the road load of road vehicles for subsequent test purposes, for example, fuel consumption tests or exhaust emission measurements. This determines the road load... | |
| ISO 10521-2:2006 specifies methods of setting the target road load on chassis dynamometers for the purpose of a subsequent test, for example the fuel consumption test or the exhaust-emission measurement... | |
| ISO 10523:2008 specifies a method for determining the pH value in rain, drinking and mineral waters, bathing waters, surface and ground waters, as well as municipal and industrial waste waters,... | |
| ISO 10524-1:2018 specifies the design, construction, type testing, and marking requirements for pressure regulators (as defined in 3.18) intended for the administration of medical gases and their mixtures in the... | |
| ISO 10524-2:2018 specifies design, construction, type testing, and marking requirements for manifold pressure regulators (as defined in 3.7) and line pressure regulators (as defined in 3.5) intended for use in... | |
| ISO 10524-3:2005 applies to pressure regulators integrated with cylinder valves intended for the administration of medical gases in the treatment, management, diagnostic evaluation and care of patients for use with... | |
| ISO 10524-4:2008 applies to the types of low-pressure regulators listed below and intended to be used with the following medical gases in the treatment, management, diagnostic evaluation and care of... | |
| ISO 10535:2006 specifies requirements and test methods only for hoists and body-support units intended for the transfer of disabled persons as classified in ISO 9999:2002: 12 36 03 Mobile hoists... | |
| ISO 10537:2016 defines the Encapsulation Service in terms of: a) the service primitives provided to the users of this service; b) the protocol data units employed by the service provider; | |
| ISO 10540-1:2003 specifies a colorimetric method for the determination of the phosphorus content of animal and vegetable oils and fats. This method is not suitable for determining the phosphorus content... | |
| ISO 10540-3:2002 specifies a method for the quantification of phosphorus in oil, which is limited to oils with low phosphorus content, without any turbidity or visible sediment. Depending on the... | |
| ISO 10545-13:2016 specifies a test method for determining the chemical resistance of ceramic tiles at room temperature. The method is applicable to all types of ceramic tiles. | |
| ISO 10545-14:2015 specifies a method for determining the resistance to stains of the proper surface of ceramic tiles. | |
| ISO 10545-16:2010 describes a method for utilizing colour measuring instruments for quantifying the small colour differences between plain coloured ceramic tiles, which are designed to be of uniform and consistent... | |
| ISO 10545-1:2014 specifies rules for batching, sampling, inspection, and acceptance/rejection of ceramic tiles. | |
| ISO 10545-3:2018 specifies a method for determining water absorption, apparent porosity, apparent relative density and bulk density of ceramic tiles. This method is applicable to classification of tiles and product... | |
| ISO 10545-4:2014 specifies a test method for determining the modulus of rupture and breaking strength of all ceramic tiles. | |
| ISO 10545-6:2010 specifies a test method for determining the resistance to deep abrasion of all unglazed ceramic tiles used for floor coverings. | |
| ISO 10545-8:2014 defines a test method for determining the coefficient of linear thermal expansion of ceramic tiles. | |
| ISO 10547:2009 specifies requirements for double braided ropes and for higher-strength double braided ropes made of polyester and gives rules for their designation. | |
| ISO 10548 specifies test methods for the determination of the size content of carbon fibre yarn. It is applicable to continuous-filament yarns and staple-fibre yarns. | |
| ISO 10552:2014 specifies designs and dimensions of crowns and sealed tubes and their tolerances. ISO 10552:2014 is applicable to crowns and sealed tubes of mechanical, electromechanical, and electronic wristwatches of... | |
| ISO 10554:2009 specifies requirements for double braided ropes and for higher-strength double braided ropes made of polyamide and gives rules for their designation. | |
| ISO 10555-1:2013 specifies general requirements for intravascular catheters, supplied in the sterile condition and intended for single use, for any application. | |
| ISO 10555-3:2013 specifies requirements for central venous catheters supplied in the sterile condition, and intended for single use. | |
| ISO 10555-4:2013 specifies requirements for balloon dilatation catheters supplied in the sterile condition, and intended for single use. | |
| ISO 10555-5:2013 specifies requirements for over-needle peripheral intravascular catheters, intended for accessing the peripheral vascular system, supplied in the sterile condition and intended for single use. | |
| ISO 10555-6:2015 specifies requirements, performance, and user safety issues related to subcutaneous implanted ports and catheters for intravascular long-term use supplied in sterile condition and intended for single use. ISO... | |
| ISO 10556:2009 specifies requirements for 3-strand hawser-laid, 8-strand and 12-strand braided fibre ropes made of polyester in combination with polyolefin, and gives rules for their designation. | |
| ISO 10563:2017 specifies a method for the determination of the change of mass and the change of volume of self-levelling and non-sagging sealants used in joints in building construction. | |
| ISO 10567:2007 provides a uniform method for calculating the lift capacity of hydraulic excavators and specifies a procedure for verifying the calculations. It is applicable to the limits of both... | |
| ISO 10570:2004 defines performance requirements for an articulated frame lock designed to prevent unintended machine articulation of earth-moving machinery as defined in ISO 6165 and with an articulated frame during... | |
| ISO 10571:2016 specifies the designation, dimensions, load ratings and reference speed for tyres and rims fitted to vehicles, such as all-terrain equipment, mobile cranes, crash tenders, etc., likely to operate... | |
| ISO 10572:2009 specifies requirements for 3-strand hawser-laid, 4-strand shroud-laid, 8-strand braided and 12-strand braided ropes made of mixed polyolefin fibres, and gives rules for their designation. | |
| ISO 10575:2012 specifies the characteristics of rubber sheet floor coverings with backing. ISO 10575:2012 includes a classification system based on intensity of use, which shows where resilient floor coverings should... | |
| ISO 10576-1:2002 sets out guidelines for drafting requirements that may be formulated as limiting values for a quantifiable characteristic and for checking conformity to such requirements when the test or... | |
| ISO 10577:2012 specifies the characteristics of rubber sheet floor coverings without backing. ISO 10577:2012 includes a classification system based on intensity of use, which shows where resilient floor coverings should... | |
| ISO 10579:2010 gives rules for dimensioning and tolerancing non-rigid parts where restraining of features is required during verification of dimensions and tolerances specified on a drawing. | |
| ISO 10580:2010 specifies a general laboratory test method for determination of the area-specific emission rate of volatile organic compounds (VOC) and/or the vapour-phase VOC concentration under defined climate conditions. ISO... | |
| ISO 10581:2011 specifies the characteristics of homogeneous floor coverings, based on poly(vinyl chloride), supplied in either tile or roll form. Products may contain a transparent, non-PVC factory finish. To encourage... | |
| ISO 10582:2017 specifies the characteristics of non-cushioned, heterogeneous floor coverings, consisting of poly(vinyl chloride) (PVC), supplied in either tile or plank or roll form. Products can contain a transparent, non-PVC... | |
| ISO 10590:2005 specifies a method for the determination of the influence of water immersion on the adhesion/cohesion properties at maintained extension of sealants used in joints in building construction. | |
| ISO 10591:2005 specifies a method for the determination of the influence of water on the adhesion cohesion properties of sealants with predominantly plastic behaviour which are used in joints in... | |
| ISO 10594:2006 specifies a test target and a method for checking the optical and mechanical performances of rotary cameras used for producing 16 mm microfilm. This test target and method... | |
| ISO 10595:2010 specifies the characteristics of semi-flexible/vinyl composition floor tiles based on poly(vinyl chloride) (PVC) binder and supplied in tile form. Products may contain a transparent, non-PVC factory finish. To... | |
| ISO 10596:2009 specifies the type, structure, function, performance and testing method of marine wind vane and anemometers (hereafter referred to as “wind vane/anemometer”) to be installed on a ship for... | |
| ISO 10601:2007 specifies the requirements and corresponding test methods for manufactured and natural micaceous iron oxide (MIO) pigments, in dry form, used primarily in protective coatings for steelwork. | |
| ISO 10605:2008 specifies the electrostatic discharge (ESD) test methods necessary to evaluate electronic modules intended for vehicle use. It applies to discharges in the following cases: ESD in assembly; ESD... | |
| ISO 10617:2010 is primarily concerned with the exchange of the spectral data, which is the fundamental data behind the colour being communicated. ISO 10617:2010 provides a standard format for the... | |
| ISO 10618:2004 specifies a method of test for the determination of the tensile strength, tensile modulus of elasticity and strain at maximum load of a resin-impregnated yarn specimen. The method... | |
| ISO 10619-1:2017 specifies three methods for measuring the flexibility of rubber and plastics hoses and tubing (methods A1, B and C1), where the deformation of the hose or tubing is... | |
| ISO 10619-2:2017 specifies two methods for measuring the stiffness and one method for the determination of the flexibility of rubber and plastics hoses and tubing when they are bent to... | |
| ISO 10619-3:2011 specifies a method for the determination of the bending characteristics of rubber and plastics hoses and tubing, including the force required for bending, over a range of temperatures... | |
| ISO 10628-1:2014 specifies the classification, content, and representation of flow diagrams. In addition, it lays down drafting rules for flow diagrams for chemical and petrochemical industry. ISO 10628 does not... | |
| ISO 10628-2:2012 defines graphical symbols for the preparation of diagrams for the chemical and petrochemical industry. It is a collective application standard of the ISO 14617 series. ISO 10628-2:2012 does... | |
| ISO 10631:2013 specifies requirements for design, materials (e.g. steel, cast iron, ductile iron, copper alloy), pressure/temperature ratings, and testing for butterfly valves having metallic bodies for use in general purpose... | |
| ISO 10638:2017 specifies a method using gas chromatography/mass spectrometry, for the identification of antidegradants in raw rubbers, latices, unvulcanized-rubber compounds and vulcanized-rubber products. It is applicable to the 31 types... | |
| ISO 10639:2017 specifies the properties of piping system components made from glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). It is suited for all types of water supply... | |
| ISO 10640:2011 provides a methodology to assess the ageing of polymeric systems during exposure to laboratory accelerated weathering as well as in outdoor exposures. This methodology applies mainly to photoageing,... | |
| ISO 10642:2004 specifies the characteristics of hexagon socket countersunk head screws with threads from M3 up to and including M20, with product grade A and property classes 8.8, 10.9 and... | |
| ISO 10643:2009 specifies the dimensions of accessories for cutter arbors with parallel key and tenon drive including parallel key, clutch drive ring, cutter retaining screws and the wrench for cutter... | |
| ISO 10644:2009 specifies the requirements for metric screw and plain washer assemblies made of steel with coarse thread M2 to M12 inclusive, flat seating heads, property classes up to and... | |
| ISO 10649-1:2013 specifies the dimensions of tool interface for cutter arbors with parallel key and tenon drive. | |
| ISO 10649-2:2013 specifies the dimensions of cutter arbors with parallel key and tenon drive with hollow taper interface (HSK) with flange contact surface. | |
| ISO 10649-3:2013 specifies the dimensions of cutter arbors with parallel key and tenon drive with 7/24 tapers for automatic tool changer. | |
| ISO 10649-4:2013 specifies the dimensions of cutter arbors with parallel key and tenon drive with 7/24 tapers without automatic tool changers. | |
| ISO 10649-5:2012 specifies the dimensions of cutter arbors with parallel key and tenon drive with polygonal taper interface (PSC) with flange contact surface. | |
| ISO 10649-6:2012 specifies the dimensions of cutter arbors with parallel key and tenon drive with modular taper interface (TS) with ball track system. | |
| ISO 10651-4:2002 specifies requirements for operator-powered resuscitators intended for use with all age groups and which are portable and intended to provide lung ventilation to individuals whose breathing is inadequate. | |
| ISO 10651-5:2006 specifies the basic safety and essential performance requirements for gas-powered emergency resuscitators intended for use with humans by first responders. This equipment is intended for emergency field use... | |
| ISO 10656:2016 specifies additional requirements to those given in ISO 5826 for single-phase transformers used in AC welding. It is intended to be used in conjunction with ISO 5826, whose... | |
| ISO 10663:2012 specifies the characteristics of hexagon nuts with flange (style 2), and metric fine pitch thread with nominal thread diameters, D, from 8 mm to 20 mm, in product... | |
| ISO 10664:2014 specifies the shape and basic dimensions of the hexalobular internal driving feature for bolts and screws, including the gauging method. The curvature of the contour of the hexalobular... | |
| ISO 10667-1:2011 establishes requirements and guidance for the client working with the service provider to carry out the assessment of an individual, a group, or an organization for work-related purposes. | |
| ISO 10667-2:2011 establishes requirements and guidance for the service provider in working with a client to carry out the assessment of an individual, group or organization for work-related purposes and... | |
| ISO 10668:2010 specifies requirements for procedures and methods of monetary brand value measurement. ISO 10668:2010 specifies a framework for brand valuation, including objectives, bases of valuation, approaches to valuation, methods... | |
| ISO 10673:2009 specifies the characteristics of plain steel washers, small, normal and large series, of product grade A for metric screw and washer assemblies in accordance with ISO 10644. | |
| ISO 10675-1:2016 specifies acceptance levels for indications from imperfections in butt welds of steel, nickel, titanium and their alloys detected by radiographic testing. If agreed, the acceptance levels can be... | |
| ISO 10675-2:2017 specifies acceptance levels for indications from imperfections in aluminium butt welds detected by radiographic testing. If agreed, the acceptance levels can be applied to other types of welds... | |
| ISO 10676:2010 describes a test method covering photocatalytic materials formed on, or attached to, another material surface for the purpose of decomposing, and thus eliminating, the pollutants in water, using... | |
| ISO 10677:2011 describes an ultraviolet (UV) light source and specifies a method of measuring the radiation intensity which is used in testing the performance of semiconducting photocatalytic materials in a... | |
| ISO 10678:2010 specifies a method for the determination of the photocatalytic activity of surfaces by degradation of the dye molecule methylene blue (MB) in aqueous solution using artificial ultraviolet (UV)... | |
| ISO 10679:2010 covers tool-steel compositions for usable cast shapes in the annealed condition. | |
| ISO 10681-1:2010 defines common requirements for vehicle systems implemented on a FlexRay communication link, as specified in the FlexRay Communications Systems Protocol Specification. It also describes general use-cases and communication... | |
| ISO 10681-2:2010 specifies the requirements for a communication protocol tailored to meet the requirements of FlexRay-based vehicle network systems as specified in the FlexRay Communications Systems Protocol Specification. As the... | |
| ISO 10684:2004 specifies material, process, dimensional and some performance requirements for hot dip spun galvanized coatings applied to coarse threaded steel fasteners from M8 up to and including M64 and... | |
| ISO 10685-1:2011 establishes rules and requirements for the definition of a unique identifier for spectacle frames and sunglass frames, and specifies the data information and file format used for identifying... | |
| ISO 10685-2:2016 specifies the commercial information and file format used for trading spectacle frames and sunglasses. ISO 10685-2:2016 includes sunglass clip-ons. | |
| ISO 10691:2004 specifies the procedures to be adopted when checking transportable refillable welded steel LPG cylinders before, during and after filling. It applies to transportable refillable welded steel LPG cylinders... | |
| ISO 10703:2007 specifies a method for the simultaneous determination of the activity concentration of various radionuclides emitting gamma rays with energies between 40 keV and 2 MeV in water samples,... | |
| ISO 10704:2009 specifies a method for the determination of gross alpha and gross beta activity in non‑saline waters for alpha- and beta‑emitting radionuclides. The method is applicable to raw and... | |
| ISO 10705-3:2003 specifies the general principles for assessing the performance of methods for the concentration of bacteriophages from water. Concentration is recommended for those water samples expected to contain < | |
| ISO 10710:2010 specifies a method for the determination of the inhibition of growth of the macroalga Ceramium tenuicorne by substances and mixtures contained in seawater or by waste water with... | |
| ISO 10711:2012 defines protocols and message sets between traffic detectors and traffic signal controllers. It is applicable to the various types of traffic detector technologies currently in use for real-time... | |
| ISO 10717:2010 specifies a test method intended to assess the burst strength of a closed slide fastener for footwear. The method is applicable to all types of slide fastener. | |
| ISO 10718:2015 specifies a method to enumerate the colony-forming units of yeasts, moulds and bacteria which can exist on cork stoppers and in an alcoholic solution, and which, under certain... | |
| ISO 1071:2015 specifies requirements for classification of covered electrodes for manual metal arc welding, wire electrodes for metal arc welding, tubular cored electrodes for metal arc welding with and without... | |
| ISO 10722:2007 describes an index test procedure for simulating mechanical damage to geosynthetics, caused by granular material, under repeated loading. The damage is assessed visually and by the loss of... | |
| ISO 10723:2012 specifies a method of determining whether an analytical system for natural gas analysis is fit for purpose. It can be used either to determine a range of gas... | |
| ISO 10734:2016 specifies a test method intended to assess the strength of slide fastener pullers for footwear. The method is applicable to all types of footwear slide fastener. | |
| ISO 10748:2011 specifies a test method to determine the locking strength of a slide fastener slider for footwear. The method is applicable to all types of slide fastener that have... | |
| ISO 10750:2015 describes a method intended to determine the attachment strength of the top and bottom stops of a slide fastener. The method is applicable to all types of slide... | |
| ISO 10751:2016 describes a method intended to determine the resistance of a slide fastener to repeated opening and closing. The method is applicable to all types of slide fastener with... | |
| ISO 10762:2015 establishes mounting dimensions for cylinders for use at 10 MPa [100 bar[1]], as required for interchangeability of these cylinders. NOTE This International Standard allows manufacturers of hydraulic equipment... | |
| ISO 10764:2016 describes a method intended to assess the lateral strength of a closed slide fastener for footwear. The method is applicable to all types of slide fastener. | |
| ISO 10765:2010 specifies a test method for the determination of some typical parameters of elastics for footwear using the strength/elongation graph, which is obtained from the tensile strength test. This... | |
| ISO 10766:2014 specifies the preferred range of nominal dimensions and associated tolerances for a series of hydraulic cylinder piston and rod housings for rectangular-section- cut bearing rings, of the type... | |
| ISO 10767-1:2015 establishes a test procedure for measuring the source flow ripple and source impedance of positive-displacemen t hydraulic pumps. It is applicable to all types of positive-displacemen t pumps... | |
| ISO 10768:2010 specifies a test method for the determination of the resistance of elastic materials for footwear, to repeated extension produced during normal walking. The test can be carried out... | |
| ISO 10769:2011 specifies a method for determining the water absorption of bentonite. The bentonite component is a part of clay geosynthetic barriers (GBR-C). Water absorption depends on the specific surface... | |
| ISO 10770-1:2009 describes methods for determining the performance characteristics of electrically modulated, hydraulic, four-port directional flow-control valves. ISO 10770-1:2009 describes methods of testing electrohydraulic, four-port directional flow-control valves. This type... | |
| ISO 10770-2:2012 describes methods for determining the performance characteristics of electrically modulated hydraulic three-port directional flow-control valves. This type of electrohydraulic valve controls the direction and amount of hydraulic flow... | |
| ISO 10770-3:2007 describes test methods for determining the performance characteristics of electrically modulated hydraulic pressure control valves. | |
| ISO 10771-1:2015 specifies a method of fatigue testing the pressure-containing envelopes of components used in hydraulic fluid power systems under sustained steady cyclic internal pressure loads. This part of ISO... | |
| ISO 10772:2012 describes a test method for determining the soil passing through a geotextile filter when exposed to turbulent external water flow conditions. | |
| ISO 10773:2011 specifies a method for measuring gas flow through a clay geosynthetic barrier. As clay geosynthetic barriers are used to contain gases in long-term applications, this test especially focuses... | |
| ISO 10775:2013 specifies a method for the determination of traces of cadmium in all types of paper, board and pulp, including products containing recycled fibre, that can be wet-combusted in... | |
| ISO 10776:2012 describes a method for determining the water permeability characteristics of geotextiles or geotextile-related products normal to the plane when subjected to specific normal compressive loads. | |
| ISO 10785:2011 specifies general and detailed requirements for bellows used in space systems. It establishes requirements with regard to material, design, analysis, fabrication, material, testing, inspection and operation for space... | |
| ISO 10786:2011 establishes requirements for the design; material selection and characterization; fabrication; testing and inspection of all structural items in space systems, including expendable and reusable launch vehicles, satellites and... | |
| ISO 10788:2014 is a reference for quantitative measures of lunar simulants. | |
| ISO 10789:2011 describes the processes and the requirements for the management of information/document ation within space programmes and projects. The requirements specified in ISO 10789:2011 apply to and affect the... | |
| ISO 10790:2015 gives guidelines for the selection, installation, calibration, performance, and operation of Coriolis flowmeters for the measurement of mass flow and density. This International Standard also gives appropriate considerations... | |
| ISO 10791-10:2007 specifies, with reference to ISO 230-3, tests for the evaluation of thermal distortions of the machine structure and positioning system, up to 2 000 mm in length, of... | |
| ISO 10791-1:2015 specifies, with reference to ISO 230 1, the geometric tests for machining centres (or other numerically controlled machines, where applicable) with horizontal spindle (i.e. horizontal Z-axis). It applies... | |
| ISO 10791-6:2014 specifies, with reference to ISO 230‑1 and ISO 230‑4, certain kinematic tests for machining centres, concerning spindle speeds, feed and the accuracy of the paths described by the... | |
| ISO 10791-7:2014 specifies standard test pieces with reference to ISO 230-1, cutting tests under finishing conditions. It also specifies the characteristics and dimensions of the test pieces themselves. This part... | |
| ISO 10795:2011 provides definitions of all common terms used in the area of space systems and operations. ISO 10795:2011does not contain terms specific to an individual International Standard in the... | |
| ISO 10799-1:2011 specifies the technical delivery requirements for cold-formed welded structural hollow sections of circular, square or rectangular form. It is applicable to structural hollow sections formed cold without subsequent... | |
| ISO 10799-2:2011 specifies the tolerances for cold-formed welded circular, square and rectangular structural hollow sections, and gives the dimensions and sectional properties for a range of standard sizes. | |
| ISO 10801:2010 gives requirements and recommendations for generating metal nanoparticles as aerosols suitable for inhalation toxicity testing by the evaporation/condensa tion method. Its application is limited to metals such as... | |
| ISO 10803:2011 specifies the design of ductile iron pipes used for conveying water, sewerage and other fluids, with or without internal pressure and with or without earth and traffic loading. | |
| ISO 10804:2018 specifies the design rules and type testing for restrained joint systems to be used on ductile iron pipelines complying with ISO 2531 and ISO 7186, in order to... | |
| ISO 10806:2003 specifies the characteristics of fittings for corrugated metal hose conforming with the requirements of ISO 10380. ISO 10806:2003 is also valid for other fittings provided they meet the... | |
| ISO 10808:2010 specifies requirements for, and gives guidance on, the characterization of airborne nanoparticles in inhalation exposure chambers for the purpose of inhalation toxicity studies in terms of particle mass,... | |
| ISO 10810:2010 is intended to aid the operators of X‑ray photoelectron spectrometers in their analysis of typical samples. It takes the operator through the analysis from the handling of the... | |
| ISO 10813-1:2004 gives guidance for the selection of vibration generating equipment used for vibration environmental testing, depending on the test requirements. This guidance covers such aspects of selection as the... | |
| ISO 10815:2016 establishes the basic principles for measuring, processing and evaluating vibration generated internally in railway tunnels by the passage of trains. By establishing a standard procedure, comparative data may... | |
| ISO 10816-21:2015 specifies the measurement and evaluation of mechanical vibration of wind turbines and their components by taking measurements on non-rotating parts. It applies to horizontal axis wind turbines with... | |
| ISO 10816-3:2009 gives criteria for assessing vibration measurements when made in situ. The criteria specified apply to machine sets having a power above 15 kW and operating speeds between 120... | |
| ISO 10816-7:2009 gives instructions for the evaluation of vibration on rotodynamic pumps for industrial applications with nominal power above 1 kW. It defines the special requirements for evaluation of vibration... | |
| ISO 10819:2013 specifies a method for the laboratory measurement, data analysis, and reporting of the vibration transmissibility of a glove with a vibration-reducing material that covers the palm, fingers, and... | |
| ISO 1081:2013 specifies the terms and definitions, in English and French, relating to V-belt drives, V-belts, hexagonal belts, joined V-belts and the corresponding V-grooved pulleys, V-ribbed belt drives, V-ribbed belts... | |
| ISO 10821:2005 identifies hazards and specifies safety requirements applicable to sewing machines, sewing units and sewing systems designed for professional (industrial, commercial or laboratory) use in industries including the clothing... | |
| ISO 10823:2004 gives guidelines for the selection of chain drives, composed of a roller chain and sprockets conformant with ISO 606, for industrial applications. The selection procedures and chain ratings... | |
| ISO 10830:2011 is applicable to the inspection of isotropic graphite ingots for use in solid rocket motors, in order to detect planar flaws oriented in various directions, using immersion testing... | |
| ISO 10833:2017 specifies a method to determine the susceptibility of textile floor coverings to mechanical damage at cut edges. It is applicable to all textile floor coverings both as sheet... | |
| ISO 10835:2007 gives the underlying theory, the basic principles for sampling and preparation of samples, and the basic requirements for the design, installation and operation of sampling systems, for mechanical... | |
| ISO 10840:2008 covers the following aspects of fire testing of plastics materials and products: selection of appropriate tests that reflect realistic end-use conditions; grouping of the reaction-to-fire characteristics that any... | |
| ISO 10842:2017 specifies the locations and types of aircraft ground service connections in order to optimize ground services both fixed and mobile, for the seven different services hereafter: - 400... | |
| ISO 10844:2014 specifies the essential characteristics of a test surface intended to be used for measuring vehicle and tyre or road noise emissions. The surface design given in ISO 10844:2014... | |
| ISO 10845-1:2010 describes processes, methods and procedures for the establishment within an organization of a procurement system that is fair, equitable, transparent, competitive and cost-effective. ISO 10845-1:2010 describes generic procurement... | |
| ISO 10845-2:2011 establishes, in respect of supply, services and engineering and construction works contracts, at both main and subcontract level, a format for the compilation of calls for expressions of... | |
| ISO 10845-3:2011 sets out standard conditions of tender which bind the employer and tenderer to behave in a particular manner, establish what a tenderer is required to do in order... | |
| ISO 10845-4:2011 sets out standard conditions for the calling for expressions of interest which bind the employer and respondent to behave in a particular manner, establish what is required for... | |
| ISO 10845-5:2011 establishes a key performance indicator, in the form of a contract participation goal (CPG), relating to the engagement of targeted enterprises on a contract for the provision of... | |
| ISO 10845-6:2011 establishes a key performance indicator, in the form of a contract participation goal, relating to the engagement of targeted partners in a joint venture on a contract for... | |
| ISO 10845-7:2011 establishes a key performance indicator in the form of a contract participation goal (CPG) relating to the engagement of local enterprises and labour on a contract for the... | |
| ISO 10845-8:2011 establishes a key performance indicator, in the form of a contract participation goal (CPG), relating to the engagement of targeted labour on a contract for the provision of... | |
| ISO 10846-1:2008 explains the principles underlying ISO 10846-2, ISO 10846-3, ISO 10846-4 and ISO 10846-5 for determining the transfer properties of resilient elements from laboratory measurements, and provides assistance in... | |
| ISO 10846-2:2008 specifies a method for determining the dynamic transfer stiffness for translations of resilient supports, under specified preload. The method concerns the laboratory measurement of vibrations on the input... | |
| ISO 10846-4:2003 specifies two methods for determining the dynamic transfer stiffness for translations of resilient elements other than resilient supports. Examples are resilient bellows, shaft couplings, power supply cables, hoses... | |
| ISO 10846-5:2008 specifies a driving point method for determining the low-frequency transfer stiffness for translations of resilient supports, under a specified preload. The method concerns the laboratory measurement of vibrations... | |
| ISO 10848 (all parts) specifies measurement methods to characterize the flanking transmission of one or several building components. These measurements are performed in a laboratory test facility or in the... | |
| ISO 10848 (all parts) specifies measurement methods to characterize the flanking transmission of one or several building components. This document considers only laboratory measurements. The measured quantities can be used... | |
| ISO 10848 (all parts) specifies measurement methods to characterize the flanking transmission of one or several building components. ISO 10848-3:2017 specifies laboratory and field measurements of buildings for Type B... | |
| ISO 10848 (all parts) specifies measurement methods to characterize the flanking transmission of one or several building components. ISO 10848-4:2017 specifies laboratory and field measurements of buildings where at least... | |
| ISO 1085:2016 specifies the size pairing of double-ended wrenches with unequal nominal widths across flats. NOTE The wrenches covered by this document are those identified in ISO 1703:2005 under reference... | |
| ISO 10862:2009 specifies requirements and test methods for quick release devices as a component of the small sailing-craft trapeze system worn whilst afloat. The quick release device is intended to... | |
| ISO 10863:2011 specifies the application of the time-of-flight diffraction (TOFD) technique to the semi- or fully automated ultrasonic testing of fusion-welded joints in metallic materials of minimum thickness 6 mm. | |
| ISO 10865-1:2012 is applicable to wheelchair passenger spaces (RF‑WPSs) intended for use by rearward-facing wheelchair-seated occupants, with a body mass greater than 22 kg, when travelling in accessible transport vehicles. | |
| ISO 10865-2:2015 applies to wheelchair passenger spaces that are intended for use by passengers with a body mass greater than 22 kg who remain in their wheelchairs when travelling facing... | |
| ISO 10869:2010 specifies certain characteristics of the oil of fir needle, Siberian (Abies sibirica Ledeb.) in order to facilitate assessment of its quality. | |
| ISO 10872:2010 specifies a method for determining the toxicity of environmental samples on growth, fertility and reproduction of Caenorhabditis elegans. The method applies to contaminated whole fresh-water sediment (maximum salinity,... | |
| ISO 10873:2010 classifies denture adhesives used by wearers of removable dentures; it also specifies requirements, test methods and instructions to be supplied for the use of such products. ISO 10873:2010... | |
| ISO 10874:2009 establishes a classification system for resilient, textile and laminate floor coverings. The classification is based on practical requirements for areas of use and intensity of use and is... | |
| ISO 10878:2013 defines terms used in infrared thermography for non-destructive testing and forms a common basis for standard general use. | |
| ISO 10880:2017 provides general principles for infrared thermographic testing in the field of industrial non-destructive testing (NDT). | |
| ISO 10882-1:2011 specifies a procedure for sampling airborne particles in the breathing zone of a person who performs welding and allied processes (the operator). It also provides details of relevant... | |
| ISO 10889-1:2004 specifies the interchangeability dimensions of the cylindrical shank and location bore, and the dimensions related to data medium, of tool holders. It also specifies the technical delivery conditions... | |
| ISO 10889-2:2016 specifies dimensions, designations and complementary technical delivery conditions for tool holders of type A with cylindrical shank in accordance with ISO 10889‑1 for tool holders of special designs. | |
| ISO 10889-3:2016 specifies dimensions, designations, and complementary technical delivery conditions for tool holders with a rectangular radial seat of types B1 to B8 with cylindrical shank in accordance with ISO... | |
| ISO 10889-4:2016 specifies dimensions, designations and complementary technical delivery conditions for tool holders with a rectangular axial seat of types C1 to C4 with cylindrical shank in accordance with ISO... | |
| ISO 10889-5:2016 specifies dimensions, designations and complementary technical delivery conditions for tool holders with more than one rectangular seat of types D1 and D2 with cylindrical shank in accordance with... | |
| ISO 10889-6:2016 specifies dimensions, designations, and complementary technical delivery conditions for tool holders with cylindrical seat of types E1 to E4 with a mounting system cylindrical shank in accordance with... | |
| ISO 10889-7:2016 specifies dimensions, designations, and complementary technical delivery conditions for tool holders with taper seat of type F and with a cylindrical shank mounting system in accordance with ISO... | |
| ISO 1088:2007 provides a standard basis for the collection and processing of data for the determination of the uncertainties in measurements of discharge in open channels by velocity-area methods using... | |
| ISO 10890:2010 specifies a method for estimating the mean release rate of biocide from an antifouling paint over its entire lifetime (in-service period) using a mass-balance calculation. If required, the... | |
| ISO 10893-10:2011 specifies requirements for automated full peripheral ultrasonic shear wave (generated by conventional or phased array technique) testing of seamless and welded [except submerged arc-welded (SAW)] steel tubes, for... | |
| ISO 10893-11:2011 specifies requirements for the automated ultrasonic shear wave (generated by conventional or phased array technique) testing of the weld seam of submerged arc-welded (SAW) or electric resistance and... | |
| ISO 10893-12:2011 specifies requirements for the automated full peripheral ultrasonic testing of seamless and welded steel tubes, with the exception of submerged arc-welded (SAW) tubes, for wall thickness measurement. It... | |
| ISO 10893-1:2011 specifies requirements for automated electromagnetic testing of seamless and welded steel tubes, with the exception of submerged arc-welded (SAW) tubes, for verification of hydraulic leak-tightness. It is applicable... | |
| ISO 10893-2:2011 specifies requirements for automated eddy current testing of seamless and welded tubes with the exception of submerged arc-welded (SAW) tubes, for the detection of imperfections according to the... | |
| ISO 10893-3:2011 specifies requirements for automated full peripheral magnetic flux leakage testing of seamless and welded ferromagnetic steel tubes, with the exception of submerged arc-welded (SAW) tubes, for the detection... | |
| ISO 10893-4:2011 specifies requirements applicable to liquid penetrant testing of seamless and welded tubes for the detection of surface imperfections. It is applicable to all or any part of the... | |
| ISO 10893-5:2011 specifies requirements for magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections on the tube body and the end/bevel face at... | |
| ISO 10893-6:2011 specifies requirements for film-based radiographic X-ray testing of the longitudinal or helical weld seams of automated fusion arc-welded steel tubes for the detection of imperfections. It can also... | |
| ISO 10893-7:2011 specifies the requirements for digital radiographic X-ray testing by either computed radiography (CR) or radiography with digital detector arrays (DDA) of the longitudinal or helical weld seams of... | |
| ISO 10893-8:2011 specifies requirements for automated ultrasonic testing for the detection of laminar imperfections in the pipe body (full peripheral testing) of seamless and welded, except submerged arc-welded (SAW), steel... | |
| ISO 10893-9:2011 specifies requirements for the automated ultrasonic testing of strip/plate used in the manufacture of welded tubes for the detection of laminar imperfections carried out in the pipe mill... | |
| ISO 10896-2:2016 specifies general safety requirements for slewing rough-terrain variable-reach trucks (hereafter known as "trucks"), consisting of a lower chassis with a slewing upper structure equipped with a telescopic lifting... | |
| ISO 10896-4:2015 specifies the additional safety requirements and means of verification for rough-terrain variable-reach trucks (hereafter referred to as trucks) fitted with a lifting attachment for handling suspended loads which... | |
| ISO 10896-5:2015 defines design and safety requirements, and means for their verification, for the interface between a non-slewing or slewing variable-reach rough-terrain truck (hereafter referred to as "trucks") and an... | |
| ISO 10896-6:2015 specifies safety requirements and means of verification for tilting operator's cabs of trucks covered by ISO 10896‑1 and ISO 10896‑2, where the seat index point (SIP) height is... | |
| ISO 10896-7:2016 specifies design, safety and verification requirements for longitudinal load moment systems which can be used on rough-terrain trucks (hereafter referred to as trucks). This document provides requirements for... | |
| ISO 10897:2016 specifies the dimensions, materials and manufacturing requirements, and designation of collets for tools with cylindrical shanks and their corresponding holders and nuts. For non-standardized clamping devices, such as... | |
| ISO 10904:2011 specifies technical requirements and methods for the inspection and testing of straight short and long fibre-cement profiled sheets and their fibre-cement fittings designed to provide the weather-exposed surfaces... | |
| ISO 10907-1:2008 specifies the basic dimensions and tolerances, in millimetres, of locating rings for mounting of moulds (see Figure 1) without thermal insulating sheets, suitable for injection moulding machines up... | |
| ISO 10907-2:2007 specifies the basic dimensions and tolerances, in millimetres, of locating rings, for the mounting of moulds with thermal insulating sheets, suitable for injection moulding machines up to size... | |
| ISO 10916:2014 defines the calculation methodology for determining the monthly and annual amount of usable daylight penetrating non-residential buildings through vertical facades and rooflights and the impact thereof on the... | |
| ISO 10924-1:2016 defines terms and specifies general test requirements for circuit breakers for use in road vehicles with a nominal voltage of 12 V d.c., 24 V d.c, 48 V... | |
| ISO 10924-2:2014 gives guidance for the choice and application of automotive circuit breakers. It describes the various parameters which have to be taken into account when selecting circuit breakers. | |
| ISO 10924-3:2015 specifies miniature circuit breakers with tabs (blade-type), Form CB11 for use in road vehicles. It establishes, for this circuit breaker form, the rated current, test procedures, performance requirements... | |
| ISO 10924-4:2015 specifies medium circuit breakers with tabs (Blade type), Form CB15, for use in road vehicles. It establishes, for this circuit breaker form, the rated current, test procedures, performance... | |
| ISO 10924-5:2016 specifies circuit breakers with rated voltage of 450 V for use in road vehicles. It establishes, for this circuit breaker type, the rated current, test procedures, performance requirements... | |
| ISO 10928:2016 specifies procedures suitable for the analysis of data which, when converted into logarithms of the values, have either a normal or a skewed distribution. It is intended for... | |
| ISO 10931:2005 specifies the characteristics and requirements for components such as pipes, fittings and valves made from poly (vinylidene fluoride) (PVDF), intended to be used for thermoplastics piping systems in... | |
| ISO 10932 IDF 223:2010 specifies a method for determining the minimal inhibitory concentration (MIC) of a series of antibiotics applicable to bifidobacteria and non-enterococcal lactic acid bacteria (LAB). ISO 10932... | |
| ISO 10934-2:2007 specifies terms and definitions to be used in the field of advanced light microscopy. | |
| ISO 10935:2009 specifies the dimensions of a thread mount connection type C for a microscope imaging exit port (other than a monocular or binocular viewing tube) and the position of... | |
| ISO 10998:2016 specifies the dimensions and technical specifications of spot drills of high-speed steel and hardmetal with a point angle of 90° or 120°. | |
| ISO 15045-9:2013 specifies a test method for determining the resistance to thermal shock of all ceramic tiles under normal conditions of use. | |
| La présente Norme internationale établit le vocabulaire fondamental de la théorie et de la pratique du travail terminologique. Elle n'inclut pas le vocabulaire traitant des applications informatiques du travail terminologique,... | |
| Lays down specifications for the dimensions of the plug and socket as well as their designation. | |
| Lays down the properties and establishes principles for the design and use. Requirements are specified in the fourteenth edition of API Recommended Practice 7G (RP 7G), August 1990, which is... | |
| Lays down the recommended values of the main dimensions of the screw conveyor's elements. | |
| Lays down the specification covering the design and rating. Specifies the requirements for the dimensional characteristics, chemical and mechanical properties and gauging practice. Requirements are specified in the sixteenth edition... | |
| Method for determining the resistance of the colour in textile fabrics to migration into polyvinyl chloride which contains plasticizer. A specimen of a textile impregnated with plasticizer is brought into... | |
| Of the test methods presented (strength test for the structure, endurance test), only some may be required depending on the type of tyre to be tested. The tests are carried... | |
| Refers to taper dimensions and tolerances for electrode caps, electrode adaptors, electrode holders and similar parts, where the electrode force Fmax, given for diameter d1 in tables 1, 2 and... | |
| Replaces the existing text in subclause 4.6. | |
| Restricted to the description of the four techniques for introducing the poorly-soluble organic test compounds for a subsequent test on biodegradability in an aqueous medium. The techniques are: direct addition,... | |
| Solutions of the substance to be tested in differing concentrations are mixed with hard water solutions of differing known calcium hardness. After leaving the solutions to stand in specified conditions... | |
| Specification of a method for the determination of the bulk density of PVC-polymers, densified by vibration under specified conditions. A weighed test portion is filled into a measuring cylinder and... | |
| Specified are cross-section, dimensions, permissible deviations, etc., the inspection and delivery conditions and the marking of strips with rectangular face of any species of wood. They are manufactured in three... | |
| Specifies a dimensioning system, with numerical values of the dimensions in millimetres and inches, for cotter slots with 5 % taper keys for Morse tapers, outside and inside, and for... | |
| Specifies a method for determining the frost resistance of all ceramic tiles intended for use in freezing conditions in the presence of water. | |
| Specifies a method for determining the resistance of the colour of natural cellulose textiles to the action of severe bleaching with sodium chlorite as ordinarily employed in textile processing. A... | |
| Specifies a method for determining the resistance of the colour of textiles composed of natural and regenerated cellulose to the action of mild bleaching with sodium chlorite as ordinarily employed... | |
| Specifies a method for determining the resistance of the colour of textiles in all forms to the manufacturing operation designed to remove vegetable impurities by a treatment at high temperatures... | |
| Specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to the action of a typical rubber compound such as may... | |
| Specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to the action of bleaching baths containing peroxide in concentrations commonly... | |
| Specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to the action of ozone in the atmosphere, both at ambient... | |
| Specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to the action of sulfur dioxide as used for bleaching animal... | |
| Specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to the action of sulfur monochloride under the conditions usually occurring... | |
| Specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms, except loose fibres, to exposure to atmospheric oxides of nitrogen as... | |
| Specifies a method for determining the resistance of the colour of textiles to the action of processes used for dyeing wool. Specimens of the textile in contact with adjacent fabrics... | |
| Specifies a method for the detection and enumeration of F-specific ribonucleic acid bacteriophages. The sample is incubated with an appropriate host strain. Applicable to all kinds of water, sediments and... | |
| Specifies a method for the determination of carbonate content in soil samples. Applicable to all types of air-dried soil samples. | |
| Specifies a method for the determination of the behaviour of a basic dye in relation to its compatibility with other basic dyes when applied to acrylic fibres. | |
| Specifies a method for the determination of the content of the different glucosinolates in crucifer oilseeds. Does not allow to determine glucosinolates which are substituted on the glucose molekule. | |
| Specifies a method for the determination of the sound absorption coefficient, reflection factor, surface impedance or admittance of materials and objects. The values are determined by evaluation of the standing... | |
| Specifies a method for the determination of the total carbon content in soil after dry combustion. The organic carbon content is calculated from this content after correcting for carbonates present... | |
| Specifies a method, by analysis of biochemical oxygen demand, for the evaluation in an aqueous medium of the "ultimate" biodegradability of organic compounds at a given concentration by aerobic microorganisms. | |
| Specifies a non-destructive method for the determination of water content in the unsaturated zone of soils using a neutron depth probe. Water content profiles can be obtained by measuring at... | |
| Specifies a set of 42 graphic characters in the modern Georgian script. Consists of a code table and a legend with explanatory notes containing each graphic, its use and its... | |
| Specifies a set of 83 graphic characters of the Armenian alphabet. Consists of a code table and a legend with explanatory notes containing each graphic, its use and its name. | |
| Specifies a set of 90 graphic characters containing characters from the non-Slavic Cyrillic alphabets. Consists of a code table and a legend with explanatory notes containing each graphic, its use... | |
| Specifies a test method for determining the impact resistance of ceramic tiles by measuring the coefficient of restitution. | |
| Specifies an instrumental method for assessing the change in colour of a test specimen in comparision to an identical untreated reference, and the calculations undertaken to convert the instrumental measurements... | |
| Specifies construction and performance requirements and test methods for pressure regulators intended for operation in irrigation systems, with water at temperatures not exceeding 50 °C, which may contain fertilizers and... | |
| Specifies five methods of measurement. Methods A, B and C are applicable to agents derived by condensation with a lipophilic compound without oxypropylene groups. Methods D and E should be... | |
| Specifies manual methods for determining the velocity and volume flowrate of gas streams in ducts, stacks and chimneys vented to the atmosphere. Specifies the use of two types of Pitot... | |
| Specifies methods for assessing the possible effect of repeated commercial laundering on the flammability of textile fabrics. The effect of laundering is simulated using an automatic horizontal drum washing machine... | |
| Specifies methods for checking the performance of the system and for monitoring cameras in routine use. Applies to systems used to produce first-generation microforms that comply with ISO 3272-1, ISO... | |
| Specifies requirements and conditions of delivery for ferroboron usually supplied for steelmaking and foundry use. | |
| Specifies requirements and conditions of delivery for metal chrome usually supplied for alloying special steels and alloys. | |
| Specifies requirements for dried sweet marjoram (Origanum majorana L.) both as bunches (bouquets) and as rubbed. Recommendations relating to the conditions of storage and transport are given in annex A. | |
| Specifies requirements, test methods, manuals for both the owner and the installer, and the designation for hydraulic steering systems and components from the wheel to the interface point for outboard... | |
| Specifies site hydrostatic acceptance tests for installed pressure and non-pressure pipelines used for conveying water and other liquids. Does not cover testing of pipelines for gas. | |
| Specifies sizes and nominal working pressures for tubes with outside diameters in accordance with ISO 4397 and wall thicknesses or mechanical properties in accordance with ISO 3304 (seamless precision steel... | |
| Specifies technical and test requirements for hand-operated sockets and box wrenches used for attachment and detachment of metric spline drive fastners. | |
| Specifies technical requirements and test methods (dimensions, masses, tolerances, geometry of ribbed and indented wires, chemical composition, mechanical properties, designation, marking, certification and inspection). Applies to wire made from rod... | |
| Specifies technical requirements and test methods for perforated metal plate used for industrial screening purposes and supplied in flat or coiled form. Applies to perforated plates of low carbon steel... | |
| Specifies the basic characteristics of the above mentioned handling equipment. Applies to vibrating conveyors and feeders with rectangular or trapezoidal and with flat-bottom or dished-bottom trough. | |
| Specifies the characteristics of spherical plain bearings of the inch series (without rolling elements) in corrosion-resisting steel with self-lubricating liner for elevated loads at ambient temperature, for use in fixed... | |
| Specifies the characteristics of spherical plain bearings of the metric series (without rolling elements) in corrosion-resisting steel with self-lubricating liner for elevated loads at ambient temperature, for use in fixed... | |
| Specifies the coating thickness requirements and the gold fineness of the coating. Also defines current terms (in English, French, German) concerning gold alloy coatings. Does not apply to watch bracelets... | |
| Specifies the coordinated dimensions of heald frames on which the heald-carrying rod is fixed directly on the frame stave. | |
| Specifies the coordinated dimensions of heald frames on which the heald-carrying rod is fixed to the frame stave by rod support. | |
| Specifies the design characteristics of corrugated flexible metallic hose which can be used to protect electrical wire and cable in explosive atmospheres or atmospheres where there is a risk of... | |
| Specifies the designations and illustrates, through diagrams, their respective appearances. It applies to all mechanical tests performed on a bonded assembly, regardless of the nature of the adherends and adhesive... | |
| Specifies the dimensional, mechanical and optical quality criteria for equipment to measure or to verify the orientation of the luminous beams emitted by the headlamps installed on road motor vehicles... | |
| Specifies the dimensions necessary to allow interchangeability. Figure 1 illustrates the dimensions of concern. For the dimensions of the nozzle body see ISO 8169. | |
| Specifies the dimensions of guides for heald frames, which are used for supplemental guidance of heald frames. | |
| Specifies the dimensions of surfaces on which servovalves are mounted in order to ensure interchangeability. Applies primarily to electrohydraulic flow-control servovalves. In addition, may be used for pressure-control servovalves. If... | |
| Specifies the dimensions, shape and connections for coils with two fixing holes, four fixing and/or positioning holes, and with mounting brackets. Applies to ignition systems for spark-ignited internal combustion engines... | |
| Specifies the functional, performance and safety requirements for a vehicle equipped with a liftable van body used for loading and unloading of catering equipment and supplies on all large capacity... | |
| Specifies the fundamental structure and the most important performance characteristics of automated measuring systems for oxides of nitrogen to be used on stationary source emissions, for example combustion plants. The... | |
| Specifies the general conditions and procedures for the measurement and evaluation of vibration, using measurements made on the non-rotating parts of machines with power ratings above 100 kW. Typical examples... | |
| Specifies the information to be printed on title leaves and the manner in which this information should be presented and arranged. This second edition cancels and replaces the first edition... | |
| Specifies the main requirements of the metric series of tyres. Gives the tyre designations to be used. Tabulates the ratings needed. | |
| Specifies the minimum requirements for 12 V and 24 V body system low-side intelligent power switches (LSIPS) intended for road vehicles. | |
| Specifies the nominal filling volumes and related nominal diameters of the cans. Diameters shall be determined in accordance with ISO 90-1. | |
| Specifies the nominal gross lidded capacities and related nominal diameters of the cans. Gross lidded capacities and tolerances shall be determined in accordance with ISO 90-1. | |
| Specifies the performance requirements and test method for mechanical lift-arm support devices for loaders, backhoe loaders and skid-steer loaders equipped with a lift-arm where the lift arm is required to... | |
| Specifies the principle, the reagents, the apparatus, the sampling, the test procedure, the expression of results, the precision and the test report. | |
| Specifies the purity requirements and describes the test methods for insoluble matter, heavy metals content, iron, alkalinity, acidity, sulfide content, pH value, appearance of solution. | |
| Specifies the requirements and the corresponding test method. | |
| Specifies the sizes and dimensions of cores for motion-picture and magnetic film rolls. Replaces the second edition, which has been technically revised. | |
| Specifies the structure of a car radio identification number in order to establish a uniform identification number system for car radios installed and connected in passenger cars. It further specifies... | |
| Tests are given for hot pressing when the textile is dry, when it is wet, and when it is damp. The end-use of the textile usually determines which test should... | |
| The determination consists in slow and progressive cooling of the essential oil and observation of the variations in temperature as the oil passes from the liquid to the solid state. | |
| The determination is carried out in the following way: Decomposition of the soap with sulphuric acid, and extraction of the fatty acids with light petroleum. Oxidation of the glycerol by... | |
| The determination is carried out in the following way: Extraction of matter soluble in hexane, and titration of the free fatty acids removed, with potassium hydroxide solution. Saponification of products... | |
| The free acidity determined by this method includes acidity extractable by water and acidity due to acidic groups directly attached to the cellulose acetate, e.g. carboxyl groups. This method is... | |
| The method is applicable with the following limitations: phosphorus contents between 0,001 0 % (m/m) and 1,0 % (m/m), application ranges and test portions in table 1 depending on the... | |
| The method is based on placing a stainless steel or glass vessel in an oil bath or oven, adding a sufficient quantity of the adhesive to the vessel, melting the... | |
| The method specified is applicable to sulfur contents between 0,0003 % (m/m) and 0,010 % (m/m). However, niobium, silicon, tantalum and titanium interfere in the determination of sulfur, and application... | |
| The parts covered are those which operate under dry or wet conditions or in steam, and which either come into contact with the fabric or are positioned within 100 mm... | |
| The principle of the method specified is assessing the difference in colour between dyeings made in the presence and in the absence of salts of the metal present (due to... | |
| The principle of the method specified is degrading a test portion of shale in the size range 5,6 mm to 2,8 mm, by controlled agitation in water, determining the proportion... | |
| The principle of the method specified is dissolving a test portion in hydrochloric acid followed by oxidation with hydrogen peroxide, fuming of the acid-insoluble residue in sulfuric acid with potassium... | |
| The principle of the method specified is dissolving a test portion in hydrochloric and nitric acids and dilution of the solution to a known volume, introducing a known volume of... | |
| The principle of the method specified is dissolving a test portion in hydrochloric and nitric acids followed by evaporation with perchloric acid until white fumes appear, spraying the solution into... | |
| The principle of the method specified is dissolving a test portion in hydrochloric and nitric acids, fusing the acid-insoluble residue with sodium carbonate, adding potassium chloride/lanthanum nitrate solution as a... | |
| The principle of the method specified is heating a weighed quantity of homogenized sample in a clean platinum basin, removing the combustible material by burning, finally removing the carbon by... | |
| The principle of the method specified is isokinetically withdrawing a known volume from a moving gas stream, passing the sampled gas through a filter medium to remove particulate matter (including... | |
| The specified method is applicable to sulfide determination in a mass concentration range from 0,04 mg/l to 1,5 mg/l. The following ions do not interfere in specified mass concentrations: cyanide,... | |
| The status of annex B changes from informative to normative. | |
| The test methods specified apply to fitting assemblies used in aircraft fluid systems in the pressure and temperature ranges covered by pressure classes B, D and E, and temperature types... | |
| The tests are intended to assess the performance of completely formed unit loads as they are subjected to the hazards of (land) environmental exposure, storage, handling and transportation. They are... | |
| This document defines the grades and the corresponding requirements for spheroidal graphite cast irons. This document specifies two groups of spheroidal graphite cast iron grades by a classification based on... | |
| This document specifies methods for determining the ring creep properties for glass-reinforced thermosetting plastics (GRP) pipes. Properties include the creep factor and the long-term specific creep stiffness. Testing is performed... | |
| This part of ISO 10846 specifies a method for determining the dynamic transfer stiffness for translations of resilient supports, under specific preload. The method concerns the laboratory measurements of vibration... | |
| This second edition cancels and replaces the first edition (1984). Specifies the requirements for a range of connector units. Each unit consists of the following components: shackle type connector, connector... | |
| This test method is intended for determining the effect on the colour of a dye of dyeing in the presence of hexavalent chromium salts. It is applicable to wool. An... | |
| This test method is mainly applicable to natural and regenrated cellulose materials. A specimen of the textile is agitated in a solution of sodium or lithium hypochlorite. | |
| Three tests differing in temperature are provided. |
| << Prev | Next >> |