Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
550
600
650
700
750
800
850
860
870
880
890
900
904
905
906
907
908
909
910
911
912
913
914
915
916
920
930
940
950
960
970
1000
1050
1100
1150
1200
1250
1500
1620
| Product Name | Notes |
|---|---|
| 1/10 mm Eyepiece Micrometers for Microscope | |
| 16 mm Magnetic Sound Test Film | |
| 16 mm Motion Picture 400 Hz Signal Level Test Films, Photographic Type | |
| 16 mm Motion Picture Buzz-Track Test Films, Photographic Type | |
| 16 mm Motion Picture Flutter Test Films, Photographic Type | |
| 16 mm Motion Picture Multifrequency Test Films, Photographic Type | |
| 16 mm Motion Picture Projector Alignment Test Films | |
| 16 mm Motion Picture Scanning-Beam Illumination Uniformity Test Films | |
| 16 mm Motion Picture Sound Focussing Test Films, Photographic Type | |
| 16 mm Sound Motion- Picture Projectors | |
| 35 mm and 16 mm Motion Picture Projector Travel Ghost Test Films | |
| 35 mm Motion Picture 1000 Hz Level Balance Test Films, Photographic Type | |
| 35 mm Motion Picture Buzz-Track Test Films, Photographic Type | |
| 35 mm Motion Picture Flutter Test Films, Photographic Type | |
| 35 mm Motion Picture Projector Alignment Test Films | |
| 35 mm Motion Picture Scanning-Beam Illumination Uniformity Test Films, Service Type | |
| 35 mm Motion Picture Sound Focussing Test Films, Photographic Type | |
| 35 mm Motion-Picture Projectors | |
| 7/24 taper spindle noses for automatic tool changers -- Part 1: Dimensions and designation of spindle noses of forms S and SF | |
| 7/24 taper spindle noses for automatic tool changers -- Part 2: Dimensions and designation of spindle noses of forms J and JF | |
| 7/24 Tapers for Spindle Noses and Tool Shanks | |
| Accuracy Inspection of Shaping Machines | |
| Accuracy Inspection of Slotting Machines | |
| Adjustable Angle Wrenches | |
| Adjustable Reamers | |
| Antimagnetic Watches - Classification and Performance | |
| Astronomical Telescopes | |
| Band Dryer - Test and Inspection Methods | |
| Biological microscope objectives and eyepieces - Methods of measurement of performance | |
| Biological microscope objectives | |
| Biological Microscopes for Dry Objectives | |
| Biological Microscopes for Immersion Objectives | |
| Bolt Clippers | |
| Box type upright drilling machines - Testing of the accuracy | |
| Brilliancy Test Charts for Projection Lenses | |
| Camera Accessory Shoes and Feet | |
| Carburizing, Quenching and Tempering of Steel | |
| Centres for Machine Tools | |
| Chucking reamers | |
| Chucks for Portable Electric Drills | |
| Cinematography - Photographic sound test films, 35 mm and 16 mm - Specifications | |
| Circular Saws with Cemented Carbide Tips | |
| Circular Screwing Dies for Parallel Pipe Threads | |
| Circular Screwing Dies for Taper Pipe Threads | |
| Circular Screwing Dies | |
| Clamps for Jigs and Fixtures | |
| Classification and Water Resistibility of Water Resistant Watches for General Use | |
| Code for Numerical Control of Machines | |
| Coding of Preparatory Functions G and Miscellaneous Functions M for Numerical Control of Machines | |
| Coild helical spring for press dies | |
| Combination Wrenches | |
| Compression Type Tube Fittings for Machine Tools | |
| Cover glasses for microscopes -- Part 1: Dimensional tolerances, thickness and optical properties | |
| Cutter Blocks for Wood Planing | |
| Cutting Nippers | |
| Cutting Pliers | |
| Designation of microscope objectives - Part 1: Flatness of field/Plan | |
| Designation of microscope objectives - Part 2: Chromatic correction | |
| Determination of ISO Colour Contribution Index (ISO/CCI) of Camera Lenses (Amendment 1) | |
| Determination of ISO colour contribution index (ISO/CCI) of camera lenses | |
| Determination of Size of Movement of Watch and Clock | |
| Die Blocks for Closed-Die Hammer Forging | |
| Die Blocks for Closed-Die Press Forging | |
| Die bushing for press dies | |
| Die Casting Machines | |
| Die Sets for Press Dies (Errata - December 1995) | |
| Die sets for press dies - Accuracy and measuring method | |
| Dimensions of Pallets for Machining Centers | |
| Dimensions Relating to Molds for Plastics Compression Molding Machines and Plastics Transfer Molding Machines | |
| Dimensions Relating to Molds for Plastics Injection Molding Machines | |
| Direction of Operation of Machine Tool Controls | |
| Disc spacers of moulds for plastics | |
| Diver's watches - Classification and performance | |
| Divers' watches-Classificati on and performance (Amendment 1) | |
| Double Sizers - Test and Inspection Methods | |
| Dowel Pins for Press Dies | |
| Drill chuck for machine tools | |
| Drum Sanders - Test and Inspection Methods | |
| Ejector Pins of Dies for Die Casting | |
| Ejector Pins of Moulds for Plastics | |
| Ejector sleeves of moulds for plastics | |
| Electrical Equipment of Machine Tools | |
| Electro-magnetic chucks | |
| Engagement between Microscope Condensers for Transmitted Light and Substage Sleeves | |
| Engagement between Microscope Eyepiece and Eyepiece Sleeves | |
| Engagement of Accessories to Lens Front | |
| External cylindrical centreless grinding machines - Test code for performance and accuracy | |
| Filar Micrometer Eyepieces | |
| Files | |
| Fixing Knocks and Screw Thread for Microscope Mechanical Stages | |
| Flat ejector pins of moulds for plastics | |
| Galilean Binoculars | |
| Gantry-Type Plano-Milling Machines - Testing of the Accuracy | |
| General Code of Safety for Machine Tools | |
| General Code of Safety for Wood working Machinery | |
| General Specifications for Photographic Glass Filters | |
| Glue spreaders - Test and inspection methods | |
| Green Sand Mixer | |
| Groove Cutters for Wood working Machines | |
| Guide Pin Bushes of Dies for Die Casting | |
| Guide pin bushes of moulds for plastics | |
| Guide Pins of Dies for Die Casting | |
| Guide Pins of Moulds for Plastics | |
| Guide Posts and Guide Bushes for Stamping Dies | |
| Guide support pins of moulds for plastics | |
| Hacksaw Blades - Part 1: Dimensions for Hand Blades | |
| Hacksaw Blades - Part 2: Dimensions for Machine Blades | |
| Hand Hacksaw Blades | |
| Hand Reamers | |
| Hand riveter | |
| Hand Saccharimeter | |
| Hand Taps for Pipe Threads for Parallel Threads | |
| Hand Taps for Pipe Threads for Taper Threads | |
| Hand Taps for Sewing Machine Thread | |
| Hand Taps for Unified Coarse Thread | |
| Hand Taps for Unified Fine Thread | |
| Hand torque tools - Requirements and test methods | |
| Heat Treatment for Metal Products - Vocabulary | |
| Heavy Duty Cutting Nippers | |
| Hexagon Nuts for Jigs and Fixtures | |
| Hexagon socket screw keys | |
| Holding Blocks and Cavity Inserts for Die Casting | |
| Hollow taper interface with flange contact surface - Part 1: Shanks - Dimensions | |
| Hollow taper interface with flange contact surface - Part 2: Receivers - Dimensions | |
| Hollow taper interface with flange contact surface - Part 3: Dimensions of shanks for stationary tools | |
| Hollow taper interface with flange contact surface - Part 4: Dimensions of receivers for stationary tools | |
| Hot presses - Test and inspection methods | |
| Image Area Produced by High-Definition Television (HDTV) on 35 mm Motion-Picture Film - Position and Dimensions | |
| Independent chucks | |
| Industrial automation systems and integration - Physical device control - Data model for computerized numerical controllers - Part 1: Overview and fundamental principles | |
| Jig Bushings and Accessories (PNS 328:1991) | |
| Lathe Tool Posts (Overall Internal Height) | |
| Lens Aperture Marking | |
| Lens-Meters | |
| Live Centers | |
| Locate rings of moulds for plastics | |
| Locating Pins for Jigs and Fixtures | |
| Machine Bridge Reamers | |
| Machine Hacksaw Blade | |
| Machine Reamers | |
| Machine tool - Test code for circular movement of numerically controlled machine tools | |
| Machine Tool Speeds and Feeds | |
| Machine Tools - Connecting Dimensions of Spindle Noses and Work Holding Chucks - Part 1: Conical Connection | |
| Machine Tools - Connecting Dimensions of Spindle Noses and Work Holding Chucks - Part 2: Cylindrical Connection | |
| Machine tools - Dimensions and geometric tests for self-centering chucks with two-piece jaws - Part 1: Manually operated chucks with tongue and grove type jaws | |
| Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 2: Power-operated chucks with tongue and grove type jaws | |
| Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 3: Power-operated chucks with serrated jaws | |
| Machine tools - General requirements for testing | |
| Machine Tools - General Rule for Lubrication | |
| Machine tools - General test code for performance and accuracy | |
| Machine Tools - Geometric Accuracy Tests and Practical Tests - Test Methods | |
| Machine Tools - Lubrication Systems | |
| Machine Tools - Presentation of Lubrication Instructions | |
| Machine tools - Safety - Electro-discharge machines | |
| Machine tools - Safety - Stationary grinding machines | |
| Machine tools - Safety - Turning machines | |
| Machine tools - Short-term capability evaluation of machining processes on metal-cutting machine tools | |
| Machine tools - Specified items | |
| Machine tools - Test conditions for bridge-type milling machines - Testing of the accuracy - Part 2: Travelling bridge (gantry-type) machines | |
| Machine tools - Test conditions for self-centring, manually-operated chucks with one-piece jaws | |
| Machine tools - Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table - Testing of the accuracy | |
| Machine tools -- Test conditions for die-sinking electro-discharge machines (EDM) -- Terminology and testing of accuracy -- Part 1: Single column machines (cross slide table type and fixed table type)... | |
| Machine tools -- Test conditions for die-sinking electro-discharge machines (EDM) -- Terminology and testing of accuracy -- Part 2: Two column machines (slide-head type and cross-slide table type) | |
| Machine tools -- Test conditions for universal spindle heads -- Part 1: Accessory heads for machines with horizontal spindle (horizontal Z-axis) | |
| Machine tools safety-Presses-Part 1: General safety requirements | |
| Machine tools safety-Presses-Part 2: Safety requirements for mechanical presses | |
| Machine tools safety-Presses-Part 3: Safety requirements for hydraulic presses | |
| Machine Vices | |
| Machine-tools safety - Safety requirements for the design and construction of work holding chucks | |
| Machined plates for press dies | |
| Machines Planing - Test and Inspection Methods | |
| Machining centers - Dimensions of spindle noses | |
| Machining Centers - Tool Shanks and Retention Knobs | |
| Magnetic Stripes and Magnetic Recording Head Gaps for Sound Record on 16 mm Motion-Picture Film Perforated Along One Edge - Positions and Width Dimensions | |
| Main Plates of Moulds for Plastics | |
| Manual Blowpipes for Oxyacetylene Welding | |
| Manual Gas Cutting Torches | |
| Marking of microscope objectives and eyepieces | |
| Measuring method for refractive index of optical glass - Part 1: Minimum deviation method | |
| Measuring method for refractive index of optical glass - Part 2: Vee block refractometers method | |
| Measuring method for temperature coefficient of refractive index of optical glass -- Part 1: Minimum deviation method | |
| Measuring method for temperature coefficient of refractive index of optical glass -- Part 2: Interferometry | |
| Measuring microscopes | |
| Measuring Projectors | |
| Mechanical presses - Methods of measurement of A-weighted sound pressure level | |
| MECHANICAL PRESSES - TESTING OF THE GRADES AND THE ACCURACY | |
| Medium size biological microscopes | |
| Method for Determining Resolving Power of Photographic Lenses | |
| Method for Determining Various Functions of Projection Lenses | |
| Method for Measuring Spectral Transmittance of a Photographic Lens | |
| Method for Measuring the Performance of Photographic Electronic Flash Equipments | |
| Method of Measurement and Description of Hand-Transmitted Vibration Level | |
| Method of Sound Level Measurement for Machine Tools | |
| Methods of Measurement for Effective Aperture, F-Number, Aperture Ratio and T-Number of Photographic Lenses | |
| Methods of Measurement for Focal Length of Photographic Lenses | |
| Methods of Measurement for Noise Emitted by Wood Working Machinery | |
| Methods of Measurement for Vignetting Factor and Relative Focal Plane Illuminance | |
| Methods of Vibration Testing for Machine Tools | |
| Microfilming for 16mm and 35mm Microfilms | |
| Micrometer Microscopes | |
| Microscope eyepieces | |
| Microscope Test Specimens | |
| Microscopes - Definition and measurement of illumination properties - Part 1: Image brightness and uniformity in bright field microscopy | |
| Microscopes - Designation of microscope objectives - Part 3: Spectral transmittance | |
| Microscopes - Imaging distances related to mechanical reference planes - Part 1: Tube length 160 mm | |
| Microscopes - Imaging distances related to mechanical reference planes - Part 2: Infinity-corrected optical systems | |
| Microscopes - Information provided to the user | |
| Microscopes - Interfacing connection type C | |
| Microscopes - Magnification | |
| Microscopes - Minimum requirements for binocular tubes | |
| Microscopes -- Definition and measurement of illumination properties -- Part 2: Illumination properties related to the colour in bright field microscopy | |
| Microscopes -- Definition and measurement of illumination properties -- Part 3: Incident light fluorescence microscopy with incoherent light sources | |
| Mill Saw Files | |
| Milling Machine Arbors and Accessories | |
| Modular taper interface with ball track system - Part 1: Dimensions and designation of shanks | |
| Modular taper interface with ball track system - Part 2: Dimensions and designation of receivers | |
| NC Processor Input - Basic Part Program Reference Language | |
| Net stage micrometer for biological microscope | |
| Nitriding and Nitrocarburizing of Iron and Steel | |
| Nomenclature for Parts of Watches and Clocks | |
| Normalizing and Annealing of Iron and Steel | |
| Numerical Control of Machines - Program Format and Definition of Address Words - Part 1: Data Format for Positioning, Line Motion and Contouring Control Systems | |
| Numerical Control of Machines - Program Format and Definition of Address Words - Part 2: Coding of Preparatory Functions G and Universal Miscellaneous Functions M | |
| Numerical Control of Machines - Symbols | |
| Numerical Control Processor Output-CLDATA | |
| Numerical Control Processor Output-Minor Elements of 2000-Type Records | |
| Numerically Controlled Machine Tools - Coordinate Axis and Motion Nomenclature | |
| Numerically Controlled Routing Machines - Test Methods for Performance and Accuracy | |
| Numerically Controlled Woodworking Machines - Marking Symbols for Operations | |
| Nut taps | |
| Offset Wrenches | |
| Opaque Projectors | |
| Open Ended Spanners | |
| Optics and Optical Instruments - Reference Wavelengths | |
| Optics and optical instruments - Specifications for binoculars, monoculars and spotting scopes(Amendment 1) | |
| Optics and optical instruments - Specifications for binoculars, monoculars and spotting scopes | |
| Optics and photonics - Optical coatings - Part 1: Definitions | |
| Optics and photonics - Optical coatings - Part 2: Optical properties | |
| Optics and photonics - Optical coatings - Part 3: Environmental durability | |
| Optics and photonics - Optical coatings - Part 4: Specific test methods | |
| Optics and photonics - Optical materials and components - Characterization of optical materials used in the infrared spectral range from 0.78 micrometer to 25 micrometer | |
| Optics and photonics - Spectral bands | |
| Optics and photonics - Spectroscopic measurement methods for integrated scattering by plane optical elements | |
| Optics and photonics -- Optical materials and components -- Test method for refractive index of infrared optical materials | |
| Optics and photonics-Optical materials and components-Specifica tion of calcium fluoride used in the infrared spectrum | |
| Overhead Projectors | |
| Paper Cutting Machine - Paper Cutting Knives | |
| Parallel Bench Vices | |
| Parts of watches and clocks -- Nomenclature (Amendment 1) | |
| Permanent Magnetic Chucks | |
| Photoelectric Methods for Measuring Light Exposure in Focal Planes of Cameras | |
| Photographic Enlargers | |
| Photographic Sharp-Cut Glass Filters | |
| Photography - Camera Flash Illuminants - Determination of ISO Spectral Distribution Index (ISO/SDI) (Amendment 1) | |
| Photography-Camera Flash Illuminants- Determination of ISO Spectral Distribution Index (ISO/SDI) | |
| Picture Sizes for Still Cameras | |
| Pillar type upright drilling machines - Testing of the accuracy | |
| Pinion type cutters (Amendment 1) | |
| Pinion Type Cutters | |
| Pipe Wrenches | |
| Planer Knives for Woodworking Machines | |
| Plastics and rubber machines -- Injection moulding machines -- Safety requirements | |
| Polygonal taper interface with flange contact surface - Part 1: Dimensions and designation of shanks | |
| Polygonal taper interface with flange contact surface - Part 2: Dimensions and designation of receivers | |
| Pressure Regulators for Welding, Cutting and Allied Processes | |
| Presswork machinery - Safety requirements of servo presses | |
| Presswork Machinery - Symbols for Operations | |
| Process of carburizing and carbonitriding, quenching and tempering of iron and steel (Amendment 1) | |
| Process of induction hardening and tempering of iron and steel (Amendment 1) | |
| Process of Induction Hardening and Tempering of Iron and Steel Edition 1 | |
| Process of nitriding and nitrocarburizing of iron and steel (Amendment 1) | |
| Process of normalizing and annealing of iron and steel (Amendment 1) | |
| Process of quenching and tempering of iron and steel (Amendment 1) | |
| Projection Lenses for 16 mm Motion-Picture Projectors | |
| Projection Lenses for 35 mm Motion Picture Projectors | |
| Punch holder shanks for press dies | |
| Punched Tape Variable Block Format for Contouring and Contouring/Positioni ng Numerically Controlled Machine Tools | |
| Punched Tape Variable Block Format for Positioning and Straight-Cut Numerically Controlled Machine Tools | |
| Punches with cylindrical head and reduced shank for press dies | |
| Quenching and Tempering of Steel | |
| Rack type cutters | |
| Readers and reader-printers for transparent microforms (Amendment 1) | |
| Readers for Transparent Microforms | |
| Reamers - Hand reamers (Amendment 1) | |
| Reamers - Machine chucking reamers with parallel shanks or Morse taper shanks (Amendment 1) | |
| Reamers - Reamers for morse and metric tapers, with parallel shanks and morse taper shanks (Amendment 1) | |
| Reamers for Morse Tapers | |
| Reduction Sleeves and Extension Sockets for Tools with Morse taper Shank | |
| Reels for 16 mm Motion Picture Projectors - Dimensions | |
| Reels for Processed 16mm and 35mm Microfilms | |
| Reference System of Polarized Light Microscopy | |
| Requirements for balancing of rotating tools and tool systems | |
| Resolving Power Test Charts for Projection Lenses | |
| Return Pins of Dies for Die Casting | |
| Return Pins of Moulds for Plastics | |
| Roller dryer - Test and inspection methods | |
| Rotary Clippers - Test and Inspection Methods | |
| Rotary Gear Shaving Cutters | |
| Rotary Indexing Tables | |
| Round Nose Chain Pliers with Side Cutters | |
| Round Nose Pliers | |
| Rubber Hose Coupling for Gas Welding and Cutting Torches | |
| Safety of machine tools -- Drilling machines | |
| Safety Standards for Construction of Band Resaws with Feed Rollers | |
| Safety Standards for Construction of Band Saw Machines with Feed Carriages | |
| Safety Standards for Construction of Hot Presses | |
| Safety Standards for Construction of Rip Saw and Gang Rip Saw | |
| Safety Standards for Construction of Routers | |
| Safety Standards for Construction of Single Surface Planers | |
| Safety Standards for Construction of Spindle Shapers | |
| Safety Standards for Construction of Table Band Resaws | |
| Safety Standards for Construction of Veneer Lathes | |
| Saw Files | |
| Screw Drivers | |
| Screw Thread of Microscope Objectives | |
| Screwdrivers for Cross Recessed Head Screws | |
| Scroll chucks | |
| Self-Centring Chucks for Machine Tools with Two-Piece Jaws (Tongue and Groove Type) - Sizes for Interchangeability and Acceptance Test Specifications | |
| Set Files | |
| Shell Reamers | |
| Shock-resistant wrist watches - Impact performance and test methods ICS | |
| Short Machine Taps and Hand Taps for Metric Threads; (Errata-1994) | |
| Shotblast | |
| Shoulder Screws for Stamping Dies (PNS 343:1991) | |
| Shouldered ejector pins for moulds for plastics | |
| Shutter Cable Release Tips and Sockets for Cameras | |
| Shutters for Still Cameras | |
| Single Thread Fine Pitch Gear Hobs | |
| Single Thread Gear Hobs | |
| Slide Projectors | |
| Slip Joint Combination Pliers with Cutters | |
| Small Flash Connections for Cameras | |
| Small Size Biological Microscopes | |
| Socket wrenches - 12.7 mm square drive | |
| Socket wrenches - 6.3 to 25 square drive | |
| Socket wrenches - Extension bars | |
| Socket wrenches - Reversible ratchet handles | |
| Socket wrenches - Sliding T Handles | |
| Socket wrenches - Sockets | |
| Socket wrenches - Spinner handles | |
| Socket wrenches - Universal joints | |
| Spacer blocks of moulds for plastics; (Errata - December 1995) | |
| Special Tolerances for Reamers | |
| Specified Items for Machine Tools | |
| Spindle Noses and Face Plates of Lathes | |
| Spindle Noses for Drilling Machines | |
| Spindles for 16 mm Motion Picture Film Spools and Reels - Dimensions | |
| Spring Collets | |
| Sprue bushing of moulds for plastics | |
| Sprue reamers | |
| Stage micrometer for biological microscope | |
| Steel Die Sets for Press Dies | |
| Stereo microscopes | |
| Stereomicroscopes - Part 1: Minimum requirements for stereomicroscopes | |
| Stereomicroscopes - Part 2: Testing of stereomicroscopes | |
| Stereomicroscopes - Part 3: Information provided to the user | |
| Stereomicroscopes - Part 4: Marking of stereomicroscopes | |
| Straight bevel gear generating cutters (Type G) (Amendment 1) | |
| Straight Bevel Gear Generating Cutters (Type G) | |
| Straight Shank Arbors for Shell Reamers | |
| Support pillar bushes of moulds for plastics | |
| Support pillars of moulds for plastics | |
| Symbols for Indications Appearing on Machine Tools | |
| Taper lock of moulds for plastics | |
| Taper pin reamers | |
| Taper Shank Arbors for Shell Reamers | |
| Telescopic Sights | |
| Terrestrial Telescopes | |
| Test code for machine tools - Determination of accuracy and repeatability of positioning numerically controlled axes | |
| Test code for machine tools - Determination of positioning accuracy on body and face diagonals (Diagonal displacement tests) | |
| Test code for machine tools - Determination of the noise emission | |
| Test code for machine tools - Determination of thermal effects | |
| Test code for machine tools - Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools | |
| Test code for machine tools - Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions | |
| Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes | |
| Test code for machine tools - Part 3: Determination of thermal effects | |
| Test code for machine tools - Part 4: Circular tests for numerically controlled machine tools | |
| Test code for machine tools - Part 7: Geometric accuracy of axes of rotation | |
| Test code for machine tools-Part 12: Accuracy of finished test pieces | |
| Test Code for Performance and Accuracy of Bed Type Horizontal Milling Machines | |
| Test Code for Performance and Accuracy of Bed Type Vertical Milling Machines | |
| Test Code for Performance and Accuracy of Electrical Discharge Machines and Numerically Controlled Electrical Discharge Machines | |
| Test Code for Performance and Accuracy of External Cylindrical and Universal Grinding Machines | |
| Test Code for Performance and Accuracy of Gear Hobbing Machines | |
| Test Code for Performance and Accuracy of Horizontal Boring Machines (Floor Type) | |
| Test Code for Performance and Accuracy of Horizontal Boring Machines (Table Type) | |
| Test Code for Performance and Accuracy of Hydraulic Presses | |
| Test Code for Performance and Accuracy of Internal Cylindrical Grinding Machines | |
| Test Code for Performance and Accuracy of Jig Boring Machines | |
| Test Code for Performance and Accuracy of Knee Type Horizontal and Universal Milling Machines | |
| Test Code for Performance and Accuracy of Knee Type Vertical Milling Machines | |
| Test Code for Performance and Accuracy of Lathes | |
| Test Code for Performance and Accuracy of Machining Centers (Vertical Type) | |
| Test Code for Performance and Accuracy of Machining Centres | |
| Test Code for Performance and Accuracy of Multi Spindle Automatic Lathes | |
| Test code for performance and accuracy of numerically controlled external cylindrical and universal grinding machines | |
| Test code for performance and accuracy of numerically controlled horizontal boring machines (Table Type) | |
| Test Code for Performance and Accuracy of Numerically Controlled Knee Type Vertical Milling Machines | |
| Test Code for Performance and Accuracy of Numerically Controlled Lathes | |
| Test Code for Performance and Accuracy of Numerically Controlled Turret and Single Spindle Drilling Machines with Vertical Spindle | |
| Test Code for Performance and Accuracy of Planing Machines (Double Housing Type) | |
| Test Code for Performance and Accuracy of Plano- Milling Machines (Double Column Type) | |
| Test Code for Performance and Accuracy of Radial Drilling Machines | |
| Test Code for Performance and Accuracy of Shell Moulding Machines | |
| Test Code for Performance and Accuracy of Single Spindle Automatic Lathes (Fixed Headstock Type) | |
| Test Code for Performance and Accuracy of Single Spindle Automatic Lathes (Sliding Headstock Type) | |
| Test Code for Performance and Accuracy of Surface Grinding Machines with Horizontal Grinding Wheel Spindle and Reciprocating Table | |
| Test Code for Performance and Accuracy of Surface Grinding Machines with Vertical Grinding Wheel Spindle and Rotary Table | |
| Test code for performance and accuracy of turret lathes | |
| Test Code for Performance and Accuracy of Universal Tool-Grinding Machines | |
| Test Code for Performance and Accuracy of Upright Drilling Machines | |
| Test Code for Performance and Accuracy of Vertical Internal Type Broaching Machines | |
| Test Code for Performance and Accuracy of Vertical Multi-spindle Drilling Machines | |
| Test Code for Performance and Accuracy of Vertical Turning and Boring Lathes | |
| Test Code for Performance and Accuracy of Wire Electrical Discharge Machines | |
| Test Code for Performance and Accuracy of Wood Working Machinery | |
| Test Code for Performance of Sand Moulding Machines | |
| Test Conditions for Boring and Milling Machines with Horizontal Spindle - Testing of the Accuracy - Part 4: Planer Type Machines with Movable Column | |
| Test Conditions for Machining Centers - Part 1: Geometric Tests for Machines with Horizontal Spindle and with Accessory Heads (Horizontal Z-Axis) | |
| Test Conditions for Machining Centers - Part 3: Geometric Tests for Machines with Integral Indexable or Continuous Universal Heads (Vertical Z-Axis) | |
| Test Conditions for Machining Centers - Part 4: Accuracy and Repeatability of Positioning of Linear and Rotary Axes | |
| Test Conditions for Machining Centers - Part 5: Accuracy and Repeatability of Positioning of Work-Holding Pallets | |
| Test Conditions for Machining Centers - Part 6: Accuracy of Feeds, Speeds and Interpolations | |
| Test Conditions for Machining Centers - Part 7: Accuracy of a Finished Test Piece | |
| Test conditions for machining centres - Part 10: Evaluation of thermal distortions | |
| Test conditions for machining centres - Part 2: Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis) | |
| Test conditions for machining centres - Part 8: Evaluation of the contouring performance in the three coordinate planes | |
| Test conditions for machining centres - Part 9: Evaluation of the operating times of tool change and pallet change | |
| Test conditions for milling machines with table of variable height - Testing of accuracy - Part 2: Machines with vertical spindle | |
| Test conditions for milling machines with table of variable height - Testing of the accuracy - Part 1: Machines with horizontal spindle | |
| Test conditions for numerically controlled turning machines and turning centres - Part 1: Geometric tests for machines with a horizontal workholding spindle | |
| Test conditions for numerically controlled turning machines and turning centres - Part 2: Geometric tests for machines with a vertical workholding spindle | |
| Test conditions for numerically controlled turning machines and turning centres - Part 3: Geometric tests for machines with inverted vertical workholding spindles | |
| Test conditions for numerically controlled turning machines and turning centres - Part 5: Accuracy of feeds, speeds and interpolations | |
| Test conditions for numerically controlled turning machines and turning centres - Part 6: Accuracy of a finished test piece | |
| Test conditions for numerically controlled turning machines and turning centres - Part 7: Evaluation of contouring performance in the coordinate planes | |
| Test conditions for numerically controlled turning machines and turning centres - Part 8: Evaluation of thermal distortions | |
| Test conditions for numerically controlled turning machines and turning centres -- Part 4: Accuracy and repeatability of positioning of linear and rotary axes | |
| Test conditions for testing the accuracy of boring and milling machines with horizontal spindle - Part 1: Machines with fixed column and movable table | |
| Test conditions for testing the accuracy of boring and milling machines with horizontal spindle - Part 2: Machines with movable column and fixed table | |
| Test conditions for testing the accuracy of boring and milling machines with horizontal spindle -- Part 3: Machines with movable column and movable table | |
| Test Methods for Effective Working Zone of Heating Equipment for Metals Heat Treatment Use | |
| Test Methods for Performance and Accuracy of Band Saw Machines and Feed Equipment | |
| Test Methods for Performance and Accuracy of Band Saw Stretcher | |
| Test methods for performance and accuracy of band scroll saws | |
| Test Methods for Performance and Accuracy of Bandsaw Sharpening Machines | |
| Test Methods for Performance and Accuracy of Circular Saw Machines | |
| Test Methods for Performance and Accuracy of Hollow Chisel Mortising Machines | |
| Test Methods for Performance and Accuracy of Moulding Machine | |
| Test Methods for Performance and Accuracy of Planer Knife Grinding Machines | |
| Test Methods for Performance and Accuracy of Rip Saws | |
| Test Methods for Performance and Accuracy of Routing Machines | |
| Test Methods for Performance and Accuracy of Single Spindle Wood Boring Machines | |
| Test Methods for Performance and Accuracy of Spindle Moulding Machines | |
| Test Methods for Performance and Accuracy of Tenoning Machines | |
| Test Methods for Performance and Accuracy of Vertical Wood Milling Machines | |
| Test Methods for Performance and Accuracy of Wood Planers | |
| Test Transparencies for Overhead Projectors | |
| Testing Methods for Watches and Clocks | |
| Thread rolling cylindrical dies (Amendment 1) | |
| Thread Rolling Cylindrical Dies | |
| Thread rolling flat dies (Amendment 1) | |
| Thread Rolling Flat Dies | |
| Threaded Lens Mounts and Flange Focal Distances for 8 mm and 16 mm Motion Picture Cameras | |
| Tool shanks with 7/24 taper for automatic tool changers - Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF | |
| Tool shanks with 7/24 taper for automatic tool changers - Part 2: Dimensions and designation of shanks of forms J, JD and JF | |
| Tool shanks with 7/24 taper for automatic tool changers - Part 3: Dimensions and designation of retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and... | |
| Tooling Dimensions for the C-Frame Mechanical Presses | |
| Tooling Dimensions for the Straight-Side Hydraulic Presses | |
| Tooling Dimensions for the Straight-Side Mechanical Presses | |
| Torque Wrenches | |
| Tripod Connections for Cameras | |
| Tripods for Cameras | |
| Two-Track Photographic Sound Records on 16 mm Motion-Picture Prints - Position and Width Dimensions | |
| Universal Dividing Heads and Simple Dividing Heads | |
| Veneer knife grinders - Test and inspection methods | |
| Veneer Lathe Knives | |
| Veneer Lathes - Test and Inspection Methods | |
| Veneer Slicers - Test and Inspection Methods | |
| Vocabulary for telescopic systems | |
| Washers for Jigs and Fixtures | |
| Watches and Clocks - Accuracy Indication | |
| Watches and clocks - Indication of battery life | |
| Water Pump Pliers | |
| Wide belt sanders - Test and inspection methods | |
| Winding on Reels for 16mm and 35mm Microfilms | |
| Wood Band Saw Blades | |
| Wood Circular Saws | |
| Woodworking Machines - Circular Sawing Machine - Part 1: Circular Sawing Machines - Test Methods for Performance and Accuracy | |
| Woodworking Machines - Circular Sawing Machines - Part 2: Nomenclature and Acceptance Conditions of Radial Circular Saws | |
| Woodworking Machines - Circular Sawing Machines - Part 3: Nomenclature and Acceptance Conditions of Single Blade Stroke Circular Sawing Machines for Lengthwise Cutting of Solid Woods and Panels | |
| Woodworking Machines - Circular Sawing Machines - Part 4: Nomenclature and Acceptance Conditions of Single Blade Circular Sawing Machines with Travelling Table | |
| Woodworking Machines - Circular Sawing Machines - Part 5: Nomenclature and Acceptance Conditions of Double Edging Precision Circular Sawing Machines | |
| Woodworking Saws for Hand Use | |
| Wristwatch Cases - Dimensions of Fastening Elements for Bracelets |
| << Prev | Next >> |