Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
550
600
650
700
750
800
850
860
870
880
890
900
901
902
903
904
905
906
907
908
909
910
911
912
913
920
930
940
950
960
970
1000
1050
1100
1150
1200
1250
1500
1620
| Product Name | Notes |
|---|---|
| Acoustics - Measurement at the operator's position of noise emitted by earth-moving machinery - Dynamic test conditions | |
| Acoustics - Measurement of exterior noise emitted by earth-moving machinery - Dynamic test conditions | |
| Adhesive Films for Glazings | |
| Adhesives for Anchoring Wooden Blocks | |
| Adhesives for Ceiling Boards | |
| Adhesives for fixture | |
| Adhesives for floor joist | |
| Adhesives for P.V.C. Floor Tiles and P.V.C. Floor Sheets | |
| Adhesives for Plastic Foam Boards | |
| Adhesives for preformed cellular plastics thermal insulation board (Amendment 1) | |
| Adhesives for Wall Boards | |
| Adhesives for Wall Paper and Wall Coverings for Decorative Finish | |
| Adhesives for wallpaper and wallcoverings for decorative finish and TATEGU | |
| Advanced and secured handrail | |
| Alloy steel boiler and heat exchanger tubes | |
| Asbestos Cement Pipes | |
| Asbestos Cement Sidings | |
| Asphalt roofing felts (Amendment 1) | |
| Asphalt Roofing Felts | |
| Autoclaved lightweight aerated concrete panels | |
| Bathtubs | |
| Body of turnbuckle for building (Amendment 1) | |
| Body of Turnbuckle for Building | |
| Bolts of Turnbuckle for Building | |
| Brick for pavement | |
| Building Components (Concrete Panel for Floor) | |
| Building Components (Concrete Panel for Roof) | |
| Building Components (Concrete Panel for Wall) | |
| Building Components (Steel Panel for Floor) | |
| Building Components (Steel Panel for Roof) | |
| Building Components (Steel Panel for Wall) | |
| Building Components (Wood Panel for Floor) | |
| Building Components (Wood Panel for Roof) | |
| Building Components (Wood Panel for Wall) | |
| Building gaskets and Building structural gaskets - Materials in preformed solid vulcanizates used for sealing glazing and panels | |
| Cement bonded particle boards | |
| Cement bonded wood-wool and flake boards (Amendment 1) | |
| Centrifugal Reinforced Concrete Pipes | |
| Ceramic block for pavement using ceramic industrial by-product "KIRA" | |
| Ceramic tiles Amendment 1 | |
| Ceramic tiles | |
| Chemical Admixtures for Concrete | |
| Clay Rooftiles | |
| Coating Materials for Textured Finishes of Buildings | |
| Components for Metal Roof-Decks | |
| Components for wire net fences | |
| Composite sidings with metal (Amendment 1) | |
| Concrete blocks for buildings (Amendment 1) | |
| Concrete blocks for buildings | |
| Concrete Blocks for Retaining Wall and Revetment | |
| Concrete Curb-Gutters and Reinforced Concrete Curb-Gutters | |
| Concrete Curbs | |
| Concrete Flags | |
| Concrete mixers - Part 1: Terms and commercial specifications | |
| Concrete mixers - Part 2: Procedure for examination of mixing efficiency | |
| Concrete sheet piles | |
| Construction Machinery - Access Systems | |
| Construction Machinery - Service Instruments | |
| Construction Machinery - Service Tools - Hand Tools for Maintenance and Adjustment Works | |
| Construction Machinery-Minimum Access Dimensions | |
| Conveying, spraying and placing machines for concrete and mortar - Safety requirements | |
| Core Type Prestressed Concrete Pipes | |
| Corrosion inhibitor for reinforcing steel in concrete (Amendment 1) | |
| Corrosion Inhibitor for Reinforcing Steel in Concrete | |
| Corrosion protection technology of sewerage concrete structures - Part 1: Concept | |
| Corrosion protection technology of sewerage concrete structures - Part 2: Design standards for prevent sulfuric acid corrosion | |
| Corrosion protection technology of sewerage concrete structures - Part 3: Construction standards for prevent sulfuric acid corrosion (Amendment 1) | |
| Corrosion protection technology of sewerage concrete structures - Part 3: Construction standards for prevent sulfuric acid corrosion | |
| Corrosion protection technology of sewerage concrete structures -- Part 2: Design standards for prevent sulfuric acid corrosion (Amendment 1) | |
| Crawler type recycle machine of construction waste - Safety - Part 2: Requirements for mobile wood crushers with drum type cutter | |
| Crawler type recycle machine of construction wastes - Safety - Part 1: Requirements for mobile crushers | |
| Crossties Treated with Creosote Oil by Pressure Processes | |
| Crushed stone powder for concrete | |
| Decorated Asbestos Cement Shingles for Roofing | |
| Decorated cement shingles for dwelling roofs | |
| Dolomite Plaster | |
| Drawing Office Practice for Rolling Bearings | |
| Drawing Office Practice for Screw Threads | |
| Drawing Practice for Springs | |
| Earth-moving and building construction machinery -- Electromagnetic compatibility (EMC) of machines with internal electrical power supply -- Part 2: Additional EMC requirements for functional safety | |
| Earth-moving and building construction machinery-Electromag netic compatibility (EMC) of machines with internal electrical power supply-Part 1: General EMC requirements under typical electromagnetic environmental conditions | |
| Earth-moving machinery - Articulated frame lock - Performance requirements | |
| Earth-Moving Machinery - Basic Types - Vocabulary | |
| Earth-moving machinery - Crawler tractors and crawler loaders - Operator's controls | |
| Earth-moving machinery - Crawlers machines - Performance requirements and test procedures for braking systems | |
| Earth-moving machinery - Determination of ground speed | |
| Earth-Moving Machinery - Dimensions of Fuel Filler Opening | |
| Earth-Moving Machinery - Drain, Fill and Level Plugs | |
| Earth-moving machinery - Dumper body support and operator's cab tilt support devices | |
| Earth-moving machinery - Dumpers - Part 2: Standard form of specifications on off-highway dumpers | |
| Earth-moving machinery - Dumpers - Part 3: Testing methods | |
| Earth-moving machinery - Dumpers - Part 4: Body volumetric rating | |
| Earth-moving machinery - Electrical safety of machines utilizing electric drives and related components and systems - Part 1: General requirements | |
| Earth-moving machinery - Electrical safety of machines utilizing electric drives and related components and systems - Part 2: Particular requirements for externally-powered machines | |
| Earth-moving machinery - Electrical safety of machines utilizing electric drives and related components and systems - Part 3: Particular requirements for self-powered machines | |
| Earth-moving machinery - Electrical wires and cables - Principles of identification and marking | |
| Earth-Moving Machinery - Falling-Object Protective Structures - Laboratory Tests and Performance Requirements | |
| Earth-moving machinery - Field of vision of surveillance and rear-view mirrors - Part 1: Test method | |
| Earth-moving machinery - Field of vision of surveillance and rear-view mirrors - Part 2: Performance criteria | |
| Earth-moving machinery - Graders - Part 1: Terminology and commercial specifications | |
| Earth-moving machinery - Graders - Part 2: Standard form of specifications and testing methods | |
| Earth-moving machinery - Guards - Definitions and requirements | |
| Earth-moving machinery - Hazard detection systems and visual aids - Performance requirements and tests | |
| Earth-moving machinery - Hour meters | |
| Earth-moving machinery - Human physical dimensions of operators and minimum operator space envelope | |
| Earth-Moving Machinery - Hydraulic Excavator and Backhoe Loader Boom-Lowering Control Device - Requirements and Tests | |
| Earth-moving machinery - Hydraulic excavators - Laboratory tests and performance requirements for operator protective guards | |
| Earth-moving machinery - Hydraulic excavators - Part 1: Terminology and commercial specifications | |
| Earth-moving machinery - Hydraulic excavators - Part 2: Standard form of specification sheets | |
| Earth-moving machinery - Hydraulic excavators - Part 3: Testing methods | |
| Earth-moving machinery - Hydraulic excavators - Part 4: Bucket volumetric ratings | |
| Earth-moving machinery - Key-locked starting systems | |
| Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume | |
| Earth-moving machinery - Laboratory tests and performance requirements for protective structures of excavators - Part 2: Roll-over protective structures (ROPS) for hydraulic excavators of over 6 t | |
| Earth-moving machinery - Lift-arm support devices | |
| Earth-moving machinery - Lifting and tying-down attachment points - Performance requirements | |
| Earth-moving machinery - Loaders - Part 1: Terminology and commercial specification | |
| Earth-moving machinery - Loaders - Part 2: Standard form of specifications and testing methods (Amendment 1) | |
| Earth-moving machinery - Loaders - Part 2: Standard form of specifications and testing methods | |
| Earth-moving machinery - Loaders - Part 3: Bucket volumetric ratings | |
| Earth-moving machinery - Loaders - Part 4: Test method to measure breakout forces and lift capacity | |
| Earth-moving machinery - Loaders - Part 5: Calculation and verification methods for rated operating loads | |
| Earth-moving machinery - Machine-mounted forward and reverse audible warning alarm - Sound test method and performance criteria | |
| Earth-moving machinery - Machine-mounted retrieval device - Performance requirements | |
| Earth-Moving Machinery - Method for Locating the Centre of Gravity | |
| Earth-moving machinery - Method of test for the measurement of drawbar pull | |
| Earth-moving machinery - Methods of measuring the masses of whole machines, their equipment and components | |
| Earth-moving machinery - Operation and maintenance - Maintainability guidelines | |
| Earth-moving machinery - Operator enclosure environment - Part 1: General and definitions | |
| Earth-moving machinery - Operator enclosure environment - Part 2: Air filter test | |
| Earth-moving machinery - Operator enclosure environment - Part 3: Operator enclosure pressurization test method | |
| Earth-moving machinery - Operator enclosure environment - Part 4: Operator enclosure ventilation, heating and/or air conditioning test method | |
| Earth-moving machinery - Operator enclosure environment - Part 6: Determination of effect of solar heating on operator enclosure | |
| Earth-moving machinery - Operator station and maintenance areas - Bluntness of edges | |
| Earth-moving machinery - Operator's field of view - Test method, evaluation method and criteria | |
| Earth-moving machinery - Operator's manual - Content and format | |
| Earth-moving machinery - Operator's seat - Dimensions and requirements | |
| Earth-Moving Machinery - Operator\xb4s Controls | |
| Earth-moving machinery - Performance requirements for non-metallic fuel tanks | |
| Earth-moving machinery - Preservation and storage | |
| Earth-Moving Machinery - Product Identification Numbering System | |
| Earth-moving machinery - Retarders for dumpers and tractor-scrapers - Performance tests | |
| Earth-Moving Machinery - Roll-Over Protective Structures - Laboratory Tests and Performance Requirements (Amendment 1) | |
| Earth-Moving Machinery - Roll-Over Protective Structures - Laboratory Tests and Performance Requirements (Amendment 2) | |
| Earth-Moving Machinery - Roll-Over Protective Structures - Laboratory Tests and Performance Requirements | |
| Earth-moving machinery - Rollers and landfill-compactors - Terminology and commercial specifications | |
| Earth-Moving Machinery - Rubber Tyred Machine-Steering Requirements | |
| Earth-moving machinery - Safety - Part 1: General requirements | |
| Earth-moving machinery - Safety - Part 2: Requirements for bulldozer | |
| Earth-moving machinery - Safety - Part 3: Requirements for loaders | |
| Earth-moving machinery - Safety - Part 4: Requirements for hydraulic excavators | |
| Earth-moving machinery - Safety - Part 5: Requirements for dumpers | |
| Earth-moving machinery - Safety - Part 6: Requirements for cable excavators | |
| Earth-moving machinery - Safety - Part 7: Requirements for graders | |
| Earth-moving machinery - Safety requirements for remote operator control | |
| Earth-moving machinery - Safety signs and hazard pictorials - General principles | |
| Earth-moving machinery - Seat index point (SIP) | |
| Earth-moving machinery - Symbols for operator controls and other displays - Part 1: Common symbols | |
| Earth-moving machinery - Symbols for operator controls and other displays - Part 2: Specific symbols for machines, equipment and accessories | |
| Earth-moving machinery - Symbols for operator controls and other displays | |
| Earth-Moving Machinery - Tip-Over Protection Structure (TOPS) for Compact Excavators - Laboratory Tests and Performance Requirements | |
| Earth-moving machinery - Tractors - Part 2: Standard form of specifications and testing methods | |
| Earth-moving machinery - Units for dimensions, performance and capacities, and their measurement accuracies | |
| Earth-moving machinery - Visual display of machine operation | |
| Earth-moving machinery - Zones of comfort and reach for controls | |
| Earth-moving machinery -- Definitions of dimensions and codes -- Part 1: Base machine | |
| Earth-moving machinery -- Definitions of dimensions and codes -- Part 2: Equipment and attachments | |
| Earth-moving machinery -- Dumpers -- Part 1: Terminology and commercial specifications | |
| Earth-moving machinery -- Electromagnetic compatibility | |
| Earth-moving machinery -- Functional safety -- Part 1: Methodology to determine safety-related parts of the control system and performance requirements | |
| Earth-moving machinery -- Hydraulic excavators -- Part 5: Method of measuring tool | |
| Earth-moving machinery -- Operator enclosure environment -- Part 5: Windscreen defrosting system test method | |
| Earth-moving machinery -- Tractor-dozers -- Part 1: Terminology and commercial specifications | |
| Earth-moving machinery \x96\x96 Quick couplers \x96\x96 Safety | |
| Earth-moving machinery-Functional safety-Part 2: Design and evaluation of hardware and architecture requirements for safety-related parts of the control system | |
| Earth-moving machinery-Functional safety-Part 3: Environmental performance and test requirements of electronic and electrical components used in safety-related parts of the control system | |
| Earth-moving machinery-Symbols for operator controls and other displays-Part 1: Common symbols (Amendment 1) | |
| Earth-moving machinery-Symbols for operator controls and other displays-Part 2: Symbols for specific machines, equipment and accessories (Amendment 1) | |
| Elastomeric cellular preformed gaskets for windows, doors and joints of panel in buildings | |
| Epoxy injection adhesives for repairing in buildings | |
| Excavators - Operator's controls | |
| Expansive additive for concrete (Amendment 1) | |
| Expansive Additive for Concrete | |
| Extruded cement panel | |
| Fabric Sheets for Construction Shelters | |
| Fences and Gates with Metals | |
| Fiber Reinforced Cement Boards; (Errata - March 1996) | |
| Fiber reinforced cement sidings (Amendment 1) | |
| Fiberboards | |
| Fiberglass reinforced plastic mortar pipes (Amendment 1) | |
| Fiberglass reinforced plastic mortar pipes | |
| Fibre reinforced cement boards (Amendment 1) | |
| Fibreboards | |
| Fire-Retardant Woods for Buildings | |
| Fittings for sanitary wares | |
| Fittings for sliding windows (Amendment 1) | |
| Fittings for Sliding Windows | |
| Fittings for wooden construction | |
| Flat Sandwich Boards in Asbestos Cement Sheets-Wood-Wool Cement Boards | |
| Floorcovering-PVC | |
| Flush Valves for Closet | |
| Fly Ash for Use in Concrete | |
| Forced Mixing Type Mixers | |
| Form Vibrators for Concrete | |
| Foundation Wood Sill Treated with Preservatives by Pressure Processes | |
| Foundation work machinery - Safety - Part 1: Requirements for piling equipment | |
| Foundation work machinery - Safety - Part 2: Requirements for digging machines | |
| Gabions (Amendment 1) | |
| Gaskets for Windows, Doors and Joints of Panel in Buildings | |
| Glass fiber reinforced plastic bathtubs connected with floor (Amendment 1) | |
| Glass Wool Isolating Material for Floating Floors | |
| Glassfiber Reinforced Plastic Bathtubs Connected with Floor | |
| Glassfiber Reinforced Plastic Corrugated Sheets | |
| Glossary of terms for shovel type excavators | |
| Ground granulated blast-furnace slag for concrete | |
| Gypsum Boards | |
| Gypsum Plaster | |
| Gypsum Plasters | |
| Hollow Clay Building Blocks | |
| Hollow Glass Blocks | |
| Hot Rolled Steel Sheet Piles (Errata - 1995) | |
| House wrapping sheets | |
| Impact reducing TATAMIDOKO | |
| Inorganic Porous Thermal Insulation Materials | |
| Insulation Fibreboards Sandwich TATAMIDOKO | |
| Internal Vibrators for Concrete | |
| Japanese pre-mixed lime plaster for interior finish | |
| JIS ADHESIVES HANDBOOK | |
| JIS AGED AND DISABLED PEOPLE HANDBOOK | |
| JIS AUTOMOBILES I HANDBOOK | |
| JIS AUTOMOBILES II HANDBOOK | |
| Joint Treatment Materials for Gypsum Boards | |
| Jointing materials for gypsum plasterboards (Amendment 1) | |
| Lath sheets (Amendment 1) | |
| Lath Sheets | |
| Liquid-applied compounds for waterproofing membrane coating of buildings | |
| Liquid-Applied Compounds for Waterproofing Membrane Coating of Roof | |
| Loose Fill Thermal Insulation | |
| Magnesium Oxychloride Cement (Magnesia Cement) | |
| Man Made Mineral Fibre Thermal Insulation Materials | |
| Manhole covers for sewerage works | |
| Manhole Covers for Sewerage | |
| Measurement of Turning Dimensions of Wheeled Construction Machinery | |
| Melt-solidified slag material for road construction derived from municipal solid waste and sewage sludge | |
| Metal Components for Balcony and Handrails of Dwellings | |
| Metal Components for Car Port | |
| Metal Lath | |
| Metal Panels for Concrete Form | |
| Metal Roof Components for Terrace | |
| Method for the Measurement of Airborne Noise Emitted by Construction Equipment Intended for Outdoor Use | |
| Method of Plastering of Cement Mortar for Fire Protection | |
| Mobile road construction machinery - Safety - Part 1: Common requirements | |
| Mobile road construction machinery - Safety - Part 2: Specific requirements for road milling machines | |
| Mobile road construction machinery - Safety - Part 3: Specific requirements for soil stabilizing machines | |
| Mobile road construction machinery - Safety - Part 4: Requirements for compaction machines | |
| Mobile road construction machinery - Safety - Part 5: Specific requirements for floor cutting machines | |
| Mobile road construction machinery - Safety - Part 6: Requirements for asphalt pavers | |
| Mobile road construction machinery - Safety - Part 7: Requirements for asphalt distributor and asphalt sprayer | |
| Mobile road construction machinery-Safety-Par t 6: Requirements for asphalt pavers (Amendment 1) | |
| Mobile road construction machinery-Safety-Par t 7: Requirements for asphalt distributor and asphalt sprayer (Amendment 1) | |
| Mortar Lining for Ductile Iron Pipes (Errata - 1995) | |
| Movable Partitions | |
| Nails | |
| Non Straw TATAMIDOKO | |
| Oil Based Caulking Compounds for Buildings | |
| Organic Adhesives for Ceramic Tiles | |
| Organic adhesives for exterior tile finishing | |
| Paper Cores for Panel | |
| Particleboards | |
| Perforated asphalt roofing felts (Amendment 1) | |
| Perforated Asphalt Roofing Felts | |
| Pins and Studs for Powder Actuated Tool | |
| Planning for sewer system maintenance | |
| Plastering lime | |
| Plastic Covers for Bathtubs | |
| Plastic Films Vapour Barrier for Residential use (Amendment 1) | |
| Plastic Films Vapour Barrier for Residential Use | |
| Plastic Floor Parts | |
| Plastic Laminated or Printed Boards for Inside Use | |
| Plastics piping systems for renovation of sewerage networks | |
| Plastics spacers for precast concrete (Amendment 1) | |
| Plastics spacers for precast concrete | |
| Polymer dispersions and redispersible polymer powders for cement modifiers | |
| Polymer Dispersions for Cement Modifier | |
| Polymer-modified bitumen roofing sheets (Amendment 1) | |
| Polymer-Modified Bitumen Roofing Sheets | |
| Polypropylene short fibers for concrete | |
| Polystyrene-Foam Sandwich TATAMIDOKO | |
| Polyvinyl chloride floorcoverings (Amendment 1) | |
| Porcelain Enameled Bathtubs | |
| Porcelain Enameled Steel Panels | |
| Precast Concrete Products - General Rules for Classification, Designation and Marking | |
| Precast concrete products - General rules for methods of performance test | |
| Precast concrete products - General rules of materials and product methods (Amendment 1) | |
| Precast Concrete Products - General Rules of Materials and Product Methods | |
| Precast Concrete Products - Required Performance and Methods of Verification | |
| Precast concrete products -- General rules for method of inspection | |
| Precast concrete products -- General rules for methods of inspection | |
| Precast concrete products -- General rules for methods of performance test | |
| Precast Prestressed Concrete Products | |
| Precast Reinforced Components for Concrete Fences | |
| Precast Reinforced Concrete Products | |
| Precast terrazzo | |
| Precast Unreinforced Concrete Products | |
| PREFORMED CELLULAR PLASTICS THERMAL INSULATION MATERIALS | |
| Preformed flexible elastmeric foam thermal insulation materials | |
| Premix lightweight cement mortar for metal laths substrate (Amendment 1) | |
| Premix lightweight cement mortar for metal laths substrate (Amendment 2) | |
| Premix lightweight cement mortar for metal laths substrate | |
| Preservative Treatment of Woods by Butt Pressure Processes | |
| Preservative Treatments of Woods by Pressure Processes | |
| Pressed Cement Roof Tiles | |
| Prestressed concrete beams for light load slab bridges | |
| Prestressed concrete beams for slab bridges | |
| Prestressed Concrete Hollow Cored Panels | |
| Prestressed concrete slab (Double-T type) | |
| Prestressed spun concrete poles | |
| Pretensioned Spun High Strength Concrete Piles | |
| Products of wood-plastic recycled composite - Assembled decks | |
| Pulp Cement Boards | |
| Putty for Metal Sash Glazing | |
| Qualitative Standards and Testing Methods of Wood Preservatives Errata - October 1994 | |
| Ready-mixed concrete (Amendment 1) | |
| Ready-Mixed Concrete | |
| Recycled plastics buffers for parking | |
| Recycled plastics inspection chambers and covers for rainwater (Amendment 1) | |
| Recycled plastics inspection chambers and covers for rainwater | |
| Recycled plastics medial strip block | |
| Reinforced Concrete Built-up Culvert Blocks | |
| Reinforced Concrete Built-up Retaining Walls | |
| Reinforced Concrete Cable Troughs | |
| Reinforced Concrete Flumes | |
| Reinforced Concrete Gutters for Roadside | |
| Reinforced Concrete Gutters | |
| Reinforced Concrete L-shape Retaining Walls | |
| Reinforced Concrete Manhole Blocks for Sewerage Work | |
| Reinforced Concrete Pipes | |
| Reinforced Spun Concrete Piles | |
| Reinforced Spun-Concrete Pipes with Socket | |
| Rigid P V C Corrugated Sheets | |
| Rigid PVC corrugated sheets (Amendment 1) | |
| Road construction and maintenance equipment - Asphalt mixing plants - Part 1: Terminology and commercial specifications | |
| Road construction and maintenance equipment - Asphalt mixing plants - Part 2: Standard form of specifications and testing methods | |
| Rock Wool Isolating Material for Floating Floors | |
| Rock Wool Sheathing Boards | |
| Rock Wool Thermal Insulating Material for Dwellings | |
| Roof Drains | |
| Roofing Sheets of Synthetic Polymer | |
| Safety requirements for asphalt mixing plants | |
| Safety requirements for concrete mixers and plants | |
| Safety requirements for drill rigs | |
| Safety requirements for road surface cleaning machines | |
| Safety requirements for truck mixers | |
| Safety requirements for winter service machines | |
| Sanitary wares | |
| Scaffolding for roof construction and installation | |
| Screw for timber structure (Amendment 1) | |
| Screw for timber structure | |
| Sealing Compounds for Sealing and Glazing in Building | |
| SEALING COMPOUNDS FOR SEALING, GLAZING AND CAULKING IN BUILDINGS | |
| Seat Belt Assemblies and Anchorage for Earth-Moving Machineries | |
| Shovels and scoops | |
| Shrinkage reducing agent for concrete | |
| Silica Fume for Use in Concrete | |
| Slates | |
| Sound absorbing materials | |
| Sponge Gaskets for Windows, Doors and Joints of Panel in Buildings | |
| Spray-applied rigid polyurethane foam for thermal insulation (Amendment 1) | |
| Spray-Applied Rigid Polyurethane Foam for Thermal Insulation | |
| Standard Form of Specifications of Asphalt Finishers | |
| Standard Form of Specifications of Batch Type Asphalt Mixing Plant | |
| Standard Form of Specifications of Diesel Pile Hammers | |
| Standard Form of Specifications of Earth Augers | |
| Standard Form of Specifications of Earth-drill | |
| Standard Form of Specifications of Rotary Compressors for Construction | |
| Standard Form of Specifications of Shield Machine | |
| Standard Form of Specifications of Shovel Type Excavators (Hydraulic Cylinder Type) | |
| Standard Form of Specifications of Vibrating Rollers | |
| Standard form of specifications of vibratory pile hammers | |
| Standard Practice for Execution of Spun Concrete Piles | |
| Standard Practice for Fitting Asbestos Cement Chimney | |
| Standard Practice for Thermal Insulation Works | |
| Staples | |
| Steel Furring Components for Gymnasium Floors | |
| Steel Furrings for Wall and Ceiling in Buildings | |
| Steel H Piles | |
| Steel Pipe Piles | |
| Steel Pipe Sheet Piles | |
| Steel Sheds | |
| Steel Sidings-Backing by Gypsum Boards | |
| Stretchy asphalt roofing felts (Synthetic fiber base) (Amendment 1) | |
| Stretchy asphalt roofing felts (Synthetic fiber base) (Amendment 2) | |
| Stretchy Asphalt Roofing Felts (Synthetic Fiber Base) | |
| Structural gaskets used in buildings - Classification, specification and test methods | |
| Submersible Pumps for Construction | |
| Surface Preparation Materials for Coatings | |
| Surface Preparation Materials for finishing | |
| TATAMI | |
| TATAMIDOKO | |
| Technical Drawing for Mechanical Engineering | |
| TECHNICAL DRAWINGS - GEARS | |
| Technical Drawings - Rolling Bearings - Part 1: General Simplified Representation | |
| Technical Drawings - Screw Threads and Threaded Parts - Part 1: General Conventions | |
| Technical Drawings - Screw Threads and Threaded Parts - Part 2: Screw Thread Inserts | |
| Technical Drawings - Screw Threads and Threaded Parts - Part 3: Simplified Representation | |
| Temporary facilities for slope protection works | |
| Tension member for seismic reinforcement \x97 Carbon fibre composite strand wires | |
| Terminology and Commercial Specification on Off-Highway Dump Trucks | |
| Terminology and Commercial Specifications on Loaders | |
| Terminology and Commercial Specifications on Tractor | |
| Terminology and standard form of specifications and testing methods of graders | |
| Terrazzo Blocks | |
| Testing Method of Operator Seat-Transmitted Vibration for Construction Machinery | |
| Testing Method of Shovel Type Excavators | |
| Testing Methods of Off-Highway Dump Trucks | |
| The fire retardant treat process of wooden products | |
| Thermal insulation materials for buildings (Amendment 1) | |
| Toeboard | |
| Trapless Water Toilet Bowls | |
| Treated Lumbers by Diffusion Process | |
| Tubular Steel Adjustable Shores | |
| Tubular Steel Scaffolds | |
| Tunnelling machines - Safety - Part 1: Requirements for shield machines and horizontal thrust machines | |
| Tunnelling machines - Safety - Part 2: Requirements for partial face tunnelling machines | |
| Tunnelling machines - Safety - Part 3: Requirements for tunnelling boring machines and rodless shaft boring machines for rock | |
| Turnbuckle for building (Amendment 1) | |
| Turnbuckle for Building | |
| Unplasticized polyvinyl chloride (PVC-U) profiles for fabrication of windows and doors | |
| Unplasticized Polyvinyl Chloride Eaves Gutters and Downspouts | |
| Vacuum insulation panels for buildings (Amendment 1) | |
| Vacuum insulation panels for buildings | |
| Vertical Protective Net for Construction Work | |
| Vibration and Shock Testing Method for Construction Machinery Gauges | |
| Volcanic glass powder for use in concrete | |
| Volcanic silicates fiber reinforced multi-layer board (Amendment 1) | |
| Volcanic silicates fiber reinforced multi-layer board | |
| Wall Paper and Wall Coverings for Decorative Finish | |
| Waterproof pressure sensitive adhesive double coated tapes for housing | |
| Weldable Hot Rolled Steel Sheet Piles | |
| Wire Laths | |
| Wood Poles Treated with Creosote Oil by Pressure Processes | |
| Wood Poles Treated with Wood Preservatives of Chrome-Copper-Arseni c Type by Pressure Processes | |
| Wood Poles Treated with Wood Preservatives of Phenols and Inorganic Fluoride Type by Pressure Processes | |
| Wood-plastic recycled composite | |
| Wood-Wool Cement Boards | |
| Working Recorders for Construction Machinery | |
| Woven fabrics asphalt roofings (Amendment 1) | |
| Woven fabrics asphalt roofings | |
| Zinc Coated Low Carbon Steel Wire Gabions |
| << Prev | Next >> |