Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
550
600
650
700
750
800
840
850
860
870
880
890
900
901
902
903
904
905
906
907
908
909
910
911
912
920
930
940
950
960
970
1000
1050
1100
1150
1200
1250
1500
1620
| Product Name | Notes |
|---|---|
| Accelerated test method for long-term change in thermal resistance of rigid cellular plastics | |
| Accelerated weathering test method for unplasticized polyvinyl chloride windows and doors by metal halide lamp | |
| Accessories of air duct | |
| Acoustics - Determination of sound absorption coefficient and impedance in impedance tubes - Part 1: Method using standing wave ratio | |
| Acoustics - Determination of sound absorption coefficient and impedance in impedance tubes - Part 2: Transfer-function method | |
| Acoustics - Field measurements of airborne sound insulation of facade elements and facades | |
| Acoustics - Laboratory measurements of the reduction of transmitted impact sound by floor coverings on a solid standard floor - Part 1: Method using standard light impact source | |
| Acoustics - Laboratory measurements of the reduction of transmitted impact sound by floor coverings on a solid standard floor - Part 2: Method using standard heavy impact sources | |
| Acoustics - Measurement of floor impact sound insulation of buildings - Part 1: Method using standard light impact source | |
| Acoustics - Measurement of floor impact sound insulation of buildings - Part 2: Method using standard heavy impact sources | |
| Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 1: Laboratory measurements | |
| Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 2: Field measurements | |
| Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation | |
| Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Floor impact sound insulation | |
| Air quality - Bulk materials - Part 1: Sampling and qualitative determination of asbestos in commercial bulk materials | |
| Air quality - Bulk materials - Part 4: Quantitative determination of asbestos by gravimetric and microscopical methods | |
| Air-Conditioning Unit for Dwellings | |
| AMADO for Windows and Doors | |
| Anti-static effect of floor coverings and installed floors - Methods of measurement and evaluation | |
| Automatic revolving doors - Safety | |
| Bases for design of structures -- Seismic actions on structures | |
| Basic Tolerances for Building Components | |
| Bath unit for dwellings | |
| Buffer for elevators | |
| Building Boards Determination of Formaldehyde Emission - Desicator Method | |
| Building components and building elements - Thermal resistance and thermal transmittance - Calculation method | |
| Building Hardware - Locks and Latches - Part 1: Test Methods | |
| Building Hardware - Locks and Latches - Part 2: Methods of the presentation and grade of criteria for practical performance item | |
| Building Module | |
| Cisterns for Hot-water Boiler | |
| Classification of Air-Borne and Impact Sound Insulation for Buildings | |
| Classification of Performance for Building Elements | |
| Components of air duct | |
| Components of rolling door and door type for inundation preventing equipment | |
| Components of rolling fire door for buildings | |
| Components of sectional overhead door | |
| Concrete terminology (Amendment 1) | |
| Concrete Terminology | |
| Construction Parts of Glassfiber Reinforced Plastic Water Closet Wastes Disposal Plant | |
| Convectors, Baseboard-Heaters and Panel-Radiators | |
| Crushed Stone for Concrete | |
| Crushed Stone for Road Construction | |
| Curtain Rails (Metal) | |
| Design standards for wooden construction of school buildings | |
| Designing guideline for the elderly and people with disabilities - Windows and doors application in housing design | |
| Determination of asbestos in building material products - Part 2: Sampling and qualitative analysis for judgement of existence of containing asbestos | |
| Determination of asbestos in building material products - Part 3: Quantitative analysis of containing asbestos by X-ray diffraction method | |
| Determination of asbestos in building material products -- Part 3: Quantitative analysis of containing asbestos by X-ray diffraction method (Amendment 1) | |
| Determination of asbestos in building material products -- Part 5: Quantitative analysis of containing asbestos by X-ray diffraction method -- This method use only Part 1 qualitative analysis method | |
| Determination of asbestos in building material products | |
| Determination of Closing and Opening Forces for Windows and Doors | |
| Determination of steady-state thermal transmission properties - Hot box method | |
| Determination of the emission of formaldehyde for building materials and building related products - Large chamber method | |
| Determination of the emission of semi volatile organic compounds for building products - Micro chamber method | |
| Determination of the emission of volatile organic compounds (VOC) for building products - Passive method | |
| Determination of the emission of volatile organic compounds and aldehydes for building products - Sampling, preparation of test specimens and testing condition - Part 1: Boards, wallpaper and floor materials... | |
| Determination of the emission of volatile organic compounds and aldehydes for building products - Sampling, preparation of test specimens and testing condition - Part 2: Adhesives | |
| Determination of the emission of volatile organic compounds and aldehydes for building products - Sampling, preparation of test specimens and testing condition - Part 3: Paints and coating materials | |
| Determination of the emission of volatile organic compounds and aldehydes for building products - Sampling, preparation of test specimens and testing condition - Part 4: Heat-Insulating material boards | |
| Determination of the emission of volatile organic compounds and aldehydes without formaldehyde for building materials and building related products - Large chamber method | |
| Determination of the emission of volatile organic compounds and aldshydes for building products - Small chamber method | |
| Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS/FID | |
| Determination of water vapour adsorption/desorptio n properties for building materials - Part 2 : Response to temperature variation | |
| Determination of water vapour adsorption/desorptio n properties for building materials -- Part 2: Response to temperature variation (Amendment 1) | |
| Door leaves -- Measurement of defects of general flatness | |
| Door leaves -- Measurement of dimensions and of defects of squareness | |
| Doors terminology | |
| Doorsets (Amendment 2) | |
| Doorsets - Repeated opening and closing test | |
| Doorsets - Static loading test | |
| Doorsets - Static torsion test | |
| Doorsets - Vertical load test | |
| Doorsets | |
| Drain with traps for equipment units | |
| Drawing Office Practice for Architecture and Building (General Rules) | |
| Drawing Office Practice for Civil Engineering Works | |
| Electrically operated spray seats for household and similar use \x96 Methods for measuring the performance \x96 General test methods of spray seats | |
| Energy performance of windows for residential buildings - Calculation procedure | |
| Estimation of Population for Waste Water Purifier of Buildings | |
| Evaluation criteria for workability of high fluidity concrete using air-entraining and high-range water-reducing admixture containing viscosity modifying agent | |
| Fan Convector | |
| Fancoil Units | |
| Field measurement of sound pressure level from appliances and equipment used in water supply and drainage installations in buildings (Amendment 1) | |
| Field measurement of sound pressure level from appliances and equipment used in water supply and drainage installations in buildings | |
| Fine grain ferronickel-slag | |
| Fireproof Metal AMADO for Dwellings | |
| Flame retardant testing method for spark droplets of welding and gas cutting on fabric sheets in construction works (Amendment 1) | |
| Flame Retardant Testing Method for Spark Droplets of Welding and Gas Cutting on Fabric Sheets in Construction Works | |
| Floor drain with traps | |
| General principles on reliability for structures | |
| General Rule for Test Method of Windows and Doors | |
| General rules of testing method for dimension of equipment units for dwellings | |
| General Rules of Testing Method for Working-Space (Maintenance, Repair and Change) of Equipment Units for Dwellings | |
| Geological map - Symbols, colors, patterns, terms, and presentation of legend | |
| Geological map - Symbols, colors, patterns, terms, geological units, and codes for engineering geological maps | |
| Geological map -- Symbols, colors, patterns, terms, geological units, and codes for engineering geological maps (Amendment 1) | |
| Geotextiles and geotextile-related products - Procedure for simulating damage under interlocking concrete block pavement (Roller compactor method) | |
| Glassfiber reinforced plastic water tanks (Amendment 1) | |
| Glassfiber reinforced plastic water tanks | |
| Glossary of Terms Used in Building Module | |
| Glossary of terms used in finishing building materials for interior and exterior uses | |
| Governor for elevators | |
| Guidelines for Supplier Performance Rating | |
| Heart unit for dwellings | |
| Indoor air - Determination of formaldehyde - Diffusive sampling method | |
| Indoor air - Determination of formaldehyde and other carbonyl compounds - Active sampling method | |
| Indoor air - General aspects of sampling strategy | |
| Indoor air - Sampling and analysis of volatile organic compounds by solvent desorption/capillary gas chromatography - Pumped sampling | |
| Indoor air - Sampling and analysis of volatile organic compounds by solvent desorption/capillary gas chromatography Diffusive sampling | |
| Indoor air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Diffusive sampling | |
| Indoor air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Pumped sampling | |
| Indoor air - Sampling strategy for formaldehyde | |
| Indoor air - Sampling strategy for volatile organic compounds (VOCs) | |
| Indoor test methods for solar heating system performance | |
| Inspection Criteria for Microelectronic Packages and Covers | |
| Inspection standard of amusement ride | |
| Inspection standard of amusements (Airplane tower) | |
| Inspection Standard of Amusements (Ferris Wheel) | |
| Inspection standard of amusements (Merry go round) | |
| Inspection standard of amusements (Water shoot) | |
| Inspection Standard of Elevator, Escalator and Dumbwaiter | |
| Inspection Standard of Rolling Fire Doors | |
| Inspection standard of smoke exhaust equipment | |
| Inter-Unit for Dwellings | |
| Iron and steel slag for road construction (Amendment 1) | |
| Iron and Steel Slag for Road Construction | |
| JIRA 6.x Administration Cookbook | |
| JIRA 7 Administration Cookbook | |
| JIRA 7 Essentials | |
| JIRA Essentials | |
| Kitchen equipment - Coordinating sizes | |
| Kitchen Equipment - System Components | |
| Laboratory measurement of airborne sound insulation of small building elements | |
| Laboratory measurement of the reduction of transmitted tapping machine impact sound by floor coverings on a solid standard floor | |
| Lavatory unit for dwellings | |
| Lifts for the transport of persons and goods - Part 1: Passenger and goods passenger lifts | |
| Lifts for the transport of persons and goods - Part 2: Design rules, calculations, examinations and tests of lift components | |
| Light Weight Aggregates for Structural Concrete | |
| Light-Weight Rolling Door for Buildings | |
| Limestone Filler for Bituminous Paving Mixtures | |
| Material Composition Declaration for Electronic Products | |
| Material Composition Declaration for Electrotechnical Products | |
| Measurement methods for performance of solar radiation retro-reflectivity on adhesive films for glazings | |
| Measurement of thermal transmittance for projecting windows and other roof windows | |
| Measuring method for moisture content of building materials by drying at elevated temperature | |
| Measuring method of linear thermal expansion for building materials | |
| Measuring method of smoke density using light extinction method (Amendment 1) | |
| Measuring Method of Smoke Density Using Light Extinction Method | |
| Measuring method of the thermal storage properties for building materials using phase change materials | |
| Measuring method of water vapor permeance for building materials | |
| Measuring Methods for Working Life of Polyester Resin Concrete | |
| Melt-solidified slag aggregate for concrete derived from municipal solid waste and sewage sludge (Amendment 1) | |
| Melt-solidified slag aggregate for concrete derived from municipal solid waste and sewage sludge | |
| Metal Package Specification for Microelectronic Packages and Covers | |
| Method for convergence value evaluating long-term thermal insulation performance of building insulation materials-Part 1: General rules | |
| Method for convergence value evaluating long-term thermal insulation performance of building insulation materials-Part 2: Rigid foamed plastic insulations | |
| Method for convergence value evaluating long-term thermal insulation performance of building insulation materials-Part 3: Fiber-based insulation materials (man-made mineral fiber thermal insulation materials and organic fiber thermal insulation materials) | |
| Method for dynamic cone penetration test | |
| Method for Field Measurement of Floor Impact Sound Level | |
| Method for Field Measurement of Sound Pressure Level Difference | |
| Method for Field Measurements of Sound Insulation of Windows and Doors | |
| Method for Laboratory Measurement of Sound Transmission Loss | |
| Method for laboratory tests on noise emission from appliances and equipments used in Water Supply Installations (Amendment 1) | |
| Method for laboratory tests on noise emission from appliances and equipments used in water supply installations - Part 2: Mounting and operating conditions for draw-off taps and mixing valves (Amendment... | |
| Method for laboratory tests on noise emission from appliances and equipments used in water supply installations - Part 2: Mounting and operating conditions for draw-off taps and mixing valves | |
| Method for Laboratory Tests on Noise Emission from Appliances and Equipments Used in Water Supply Installations | |
| Method for Measurement of Sound Absorption Coefficients in a Reverberation Room | |
| Method for Measuring Amount of Room Ventilation (Carbon Dioxide Method) | |
| Method for measuring carbonation depth of concrete | |
| Method for measuring halocarbons in foamed plastics for thermal insulation - Thermal extraction/gas chromatography | |
| Method for obtaining soil samples using the fixed piston sampler | |
| Method for reducing samples of aggregate to testing size | |
| Method for unconfined compression test of soils | |
| Method of Abrasion Test for Building Materials and Part of Building Construction (Abrasive-Paper Method) | |
| Method of Abrasion Test for Building Materials and Part of Building Construction (Falling Sand Method) | |
| Method of abrasion test for building materials and part of building construction (Method of abrasion test for flooring materials method with rotating disk fitted friction and impact) (Amendment 1) | |
| Method of abrasion test for building materials and part of building construction (Method of abrasion test for flooring materials method with rotating disk fitted friction and impact) (Amendment 2) | |
| Method of abrasion test for building materials and part of building construction (Method of abrasion test for flooring materials method with rotating disk fitted friction and impact) | |
| Method of accelerated carbonation test for concrete | |
| Method of calculation and representation of energy efficiency standard achievement percentage of electric toilet seats | |
| Method of calculation of energy-saving performance of bath units for dwellings | |
| Method of Dutch Double-Tube Cone Penetration Test | |
| Method of fire protecting test of fire door for buildings (Amendment 1) | |
| Method of Fire Protecting Test of Fire Door for Buildings | |
| Method of fire resistance test for structural parts of buildings (Amendment 1) | |
| Method of fire resistance test for structural parts of buildings | |
| Method of fire test for noncombustible structural parts of buildings (Amendment 1) | |
| Method of fire test for noncombustible structural parts of buildings | |
| Method of Fire Test for Roof of Building | |
| Method of fire test for wooden structural parts of buildings (Amendment 1) | |
| Method of fire test for wooden structural parts of buildings | |
| Method of Making and Curing Concrete Specimens | |
| Method of making and testing for compressive strength BOSS specimens | |
| Method of Making Polyester Resin Concrete Specimens | |
| Method of Making Test Sample of Concrete in the Laboratory | |
| Method of Making Test Sample of Polymer-Modified Mortar in the Laboratory | |
| Method of measurement for rebound number on surface of concrete | |
| Method of measurement for temperature of fresh concrete (Amendment 1) | |
| Method of measurement for temperature of fresh concrete | |
| Method of Measurement of Air Quantity for Ventilation and Air Conditioning System | |
| Method of Obtaining and Testing Drilled Cores and Sawed Beams of Concrete | |
| Method of Penetration Test for Soils | |
| Method of Plate Load Test on Soils for Road | |
| Method of safety test for combustion of equipment units for dwellings | |
| Method of sampling and testing for strength of sawed prism of concrete (Amendment 1) | |
| Method of sampling fresh concrete (Amendment 1) | |
| Method of Sampling Fresh Concrete | |
| Method of Swedish Weight Sounding | |
| Method of Test for Abrasion of Coarse Aggregates by Use of the Los Angeles Machine | |
| Method of test for air content of fresh concrete by pressure method (Amendment 1) | |
| Method of Test for Air Content of Fresh Concrete by Pressure Method | |
| Method of Test for Air Content of Fresh Concrete by Volumetric Method | |
| Method of test for alkali-silica reactivity of aggregates by chemical method (Amendment 1) | |
| Method of test for alkali-silica reactivity of aggregates by chemical method | |
| Method of test for alkali-silica reactivity of aggregates by mortar-bar method (Amendment 1) | |
| Method of test for alkali-silica reactivity of aggregates by mortar-bar method | |
| Method of Test for Amount of Material Passing Standard Sieve 75 Micrometer in Aggregates | |
| Method of Test for Bleeding of Concrete | |
| Method of Test for Clay Contained in Aggregates | |
| Method of test for compressive creep of concrete | |
| Method of Test for Compressive Strength of Concrete using Portions of Beams Broken in Flexure | |
| Method of Test for Compressive Strength of Concrete | |
| Method of Test for Compressive Strength of Polyester Resin Concrete Using Portions of Beams Broken in Flexure | |
| Method of Test for Compressive Strength of Polyester Resin Concrete | |
| Method of Test for Compressive Strength of Spun Concrete | |
| Method of Test for Concrete under Biaxial Compressive Loads | |
| Method of test for content of floating particles in light weight coarse aggregate | |
| Method of test for drainage of equipment units for dwellings | |
| Method of test for drying shrinkage cracking of restricted concrete | |
| Method of Test for Dynamic Modulus of Elasticity, Rigidity and Dynamic Poisson\xb4s Ratio of Concrete Specimens by Resonance Vibration | |
| Method of Test for Electric Insulation of Equipment Unit for Dwellings | |
| Method of test for fine aggregate containing organic impurities by compressive strength of mortar | |
| Method of Test for Flexural Strength of Concrete | |
| Method of Test for Flexural Strength of Polyester Resin Concrete | |
| Method of test for floor slipperiness (Pendulum type) | |
| Method of Test for Heat Insulation of Equipment Units for Dwellings | |
| Method of Test for Hot-Water Supply of Air-Conditioning Unit for Dwellings | |
| Method of test for hygroscopic sorption properties of building materials | |
| Method of test for J-Ring flow of concrete | |
| Method of Test for Leakage of Equipment Units for Dwellings | |
| Method of Test for Moisture-Proof and Water-Proof of Sanitary Unit for Dwellings | |
| Method of test for noise of equipment units for dwellings | |
| Method of Test for Organic Impurities in Fine Aggregate | |
| Method of test for oscillation of equipment units for dwellings | |
| Method of test for particles less than density of 1.95 g/cm*3 in aggregate | |
| Method of Test for Production Control of Concrete - Method of Rapid Test for Compressive Strength of Concrete - Warm Water Curing Method | |
| Method of Test for Production Control of Concrete - Method of test for surface moisture in coarse aggregate | |
| Method of test for resistance of concrete to freezing and thawing | |
| Method of Test for Sieve Analysis of Aggregates | |
| Method of test for slump flow of concrete (Amendment 1) | |
| Method of test for slump flow of concrete | |
| Method of test for slump of concrete (Amendment 1) | |
| Method of Test for Slump of Concrete | |
| Method of test for slump of polymer-modified mortar | |
| Method of Test for Soft Particles in Coarse Aggregates by Use of Scratch Tester | |
| Method of Test for Soundness of Aggregates by Use of Sodium Sulfate | |
| Method of Test for Specific Gravity and Absorption of Coarse Aggregates | |
| Method of Test for Splitting Tensile Strength of Concrete | |
| Method of Test for Splitting Tensile Strength of Polyester Resin Concrete | |
| Method of test for static modulus of elasticity of concrete (Amendment 1) | |
| Method of test for static modulus of elasticity of concrete | |
| Method of Test for Strength and Durability of Equipment Unit for Dwellings | |
| Method of test for strength of polymer-modified mortar | |
| Method of Test for Surface Moisture in Fine Aggregate | |
| Method of test for time of setting of concrete mixtures by penetration resistance | |
| Method of Test for Total Moisture Content and Surface Moisture of Aggregate by Drying | |
| Method of test for unit mass and air content of fresh concrete by mass method (Amendment 1) | |
| Method of Test for Unit Weight and Air Content (Gravimetric) of Fresh Concrete | |
| Method of test for unit weight and air content (gravimetric) of fresh polymer-modified mortar | |
| Method of Test for Unit Weight of Aggregate and Solid Content in Aggregate | |
| Method of Test for Variability of Constituents in Freshly Mixed Concrete | |
| Method of Test for Washing Analysis of Fresh Concrete | |
| Method of test for waterproof agent of cement for concrete construction (Amendment 1) | |
| Method of Test for Waterproof Agent of Cement for Concrete Construction | |
| Method of test of cement mortar for plastering | |
| Method of Testing to Determine the Thermal Properties of Insulated Heating Tubes (Hot Water Circulation Procedure) | |
| Methods of performance test of panels for building construction (Amendment 1) | |
| Methods of Performance Test of Panels for Building Construction | |
| Methods of Test for Bulk Specific Gravity and Absorption of Light Weight Coarse Aggregates for Structural Concrete | |
| Methods of Test for Bulk Specific Gravity and Absorption of Light Weight Fine Aggregates for Structural Concrete | |
| Methods of test for chloride concentration in water of fresh concrete | |
| Methods of test for chloride ion content in hardened concrete | |
| Methods of test for length change of mortar and concrete Part 1: Method with comparator | |
| Methods of test for length change of mortar and concrete Part 2: Method with contact-type strain gauge | |
| Methods of test for length change of mortar and concrete Part 3: Method with dial gauge | |
| Methods of Test for Length Change of Mortar and Concrete | |
| Methods of test for particle density and water absorption of lightweight coarse aggregates for structural concrete (Amendment 1) | |
| Methods of test for particle density and water absorption of lightweight fine aggregates for structural concrete (Amendment 1) | |
| Methods of Test for Production Control of Concrete (Method of Test for Sand Equivalent Value of Fine Aggregates for Concrete) | |
| Methods of Test for Production Control of Concrete (Method of Test for Surface Moisture in Fine Aggregate by Centrifugal Force) | |
| Methods of Test for Production Control of Concrete - Method of rapid test for identification of the alkali reactivity of aggregates | |
| Methods of test for production control of concrete - Method of test for concentration of sludge water | |
| Methods of Test for Sound Absorption of Acoustical Materials by the Tube Method | |
| Methods of Test for Specific Gravity and Absorption of Fine Aggregates | |
| Modular co-ordinating sizes of air-conditioning unit for dwellings | |
| Modular co-ordinating sizes of piping unit for dwellings | |
| Modular co-ordination -- Sizes of sanitary unit for dwellings | |
| Modular co-ordination of equipment unit for dwellings | |
| Modular coordination-coordin ating size of opening for built-in appliances in storage furniture | |
| Nominal dimension of movable partition components for buildings | |
| Performance test methods of panel components for building construction - Part 1: General rules | |
| Performance test methods of panel components for building construction - Part 2: Tests for mechanical properties | |
| Performance test methods of panel components for building construction - Part 3: Tests for temperature, humidity and water-proof | |
| Performance test methods of panel components for building construction - Part 4: Tests for long-term properties | |
| Performance test of sorptive building materials of reducing indoor air pollution with small chamber - Measurement of adsorption flux with supplying constant concentration of contaminant air of VOC and aldehydes... | |
| Performance test of sorptive building materials of reducing indoor air pollution with small chamber - part 1: Measurement of adsorption flux with supplying constant concentration of Formaldehyde | |
| Performance test of sorptive building materials reducing indoor air pollution with small chamber - Part 2: Measurement of capability for suppressing formaldehyde emission | |
| Perlite | |
| PIPING UNITS FOR DWELLINGS | |
| Power operated pedestrian door sets - Safety | |
| Practice for preparing disturbed soil samples for soil testing | |
| Prefabricative pans for bathrooms | |
| Principle of Modular Co-Ordination in Buildings | |
| Protection of Structures Against Lightning | |
| PVC Windows for Interior Installed | |
| Radiators, convectors and similar appliances -- Methods of performance test | |
| Reaction to fire test for sandwich panel building interior systems - Box test | |
| Recommended Practice for Accelerated Artificial Exposure of Plastics Building Materials | |
| Recommended Practice for Out-Door Exposure of Plastics Building Materials | |
| Recycled aggregate for concrete-class H (Amendment 1) | |
| Recycled aggregate for concrete-class H | |
| Recycled concrete using recycled aggregate Class L (Amendment 1) | |
| Recycled concrete using recycled aggregate Class L | |
| Recycled concrete using recycled aggregate class M (Amendment 1) | |
| Recycled concrete using recycled aggregate class M | |
| Rubbles | |
| Safety gear for elevators | |
| Screens for Aluminium Sliding Windows | |
| Shutter for residential window | |
| Simplified Test Method for Determining Shading Coefficient of Shading Devices | |
| Simplified Test Method for Emissivity by Infrared Radio Meter | |
| Size of Car and Hoistway of Elevators | |
| Slag aggregate for concrete - Part 1: Blast furnace slag aggregate | |
| Slag aggregate for concrete - Part 2: Ferronickel slag aggregate | |
| Slag aggregate for concrete - Part 3: Copper slag aggregate | |
| Slag aggregate for concrete - Part 4: Electric arc furnace oxidizing slag aggregate | |
| Slag aggregate for concrete \x97 Part 5: Coal gasification slag aggregate | |
| Slag aggregate for concrete | |
| Smoke-proof test method for fire damper | |
| Soft Heavy Body Impact Test for Doors and Doorsets | |
| Solar Collectors | |
| Solar storage tanks (Amendment 1) | |
| Solar Storage Tanks | |
| Solar water heater (Amendment 1) | |
| Solar Water Heater for Dwellings | |
| Specifications of cords of indoor blinds for household use-Safety for children | |
| Standard Method of Test for Change in Properties of Plastics Building Materials Resulting from Out-Door Exposure | |
| Standard nominal size of opening components for buildings | |
| Standard Nominal Size of Steel Framed Roof Component for Buildings | |
| Standard Nominal Size of Steel Framed Wall Component for Buildings | |
| Standard of Structural Design Systems on the Prefabricated Temporary Houses | |
| Standard size of boards for buildings | |
| Steel and Aluminium Alloy Venetian Blinds (Amendment 1) | |
| Steel and Aluminium Alloy Venetian Blinds | |
| Stones | |
| Storage Furniture for Dwellings | |
| Symbols for windows and doors | |
| Technical terms for geotechnical engineering | |
| Terms of definitions for geosynthetics | |
| Terms, Definitions, and Letter Symbols for Microelectronic Devices | |
| Test method for accelerated weathering of fire-retardant treated wood products for fa\xe7ades | |
| Test method for adsorption performance of attenuation layer-Part 1: Batch test | |
| Test method for adsorption performance of attenuation layer-Part 2: Column test | |
| Test method for alkali resistance of fiber reinforced polymer(FRP) bars and grids for reinforcement of concrete | |
| Test method for automatic door systems (Amendment 1) | |
| Test method for automatic door systems (Amendment 2) | |
| Test method for automatic door systems | |
| Test method for bulk density of soils | |
| Test method for centrifuge moisture equivalent of soils | |
| Test method for cone index of compacted soils | |
| Test method for cracking by rapid high temperature heating of exterior materials applied for building facades | |
| Test method for density of soil particles | |
| Test Method for Door Fittings of Buildings - Part 1: Locks and Latches | |
| Test method for door fittings of buildings - Part 2: Fittings for door (Amendment 1) | |
| Test method for door fittings of buildings - Part 2: Fittings for door | |
| Test method for door fittings of buildings - Part 3: Floor concealed door closers, door closers and hinge closers | |
| Test method for fine fraction content of soils | |
| Test method for fire propagation over building facades | |
| Test method for ignition loss of soils | |
| Test method for leaching characteristics of geomaterials -- Up-flow percolation test | |
| Test method for liquid limit and plastic limit of soils | |
| Test method for long term change in apparent thermal conductivity of vacuum insulation panels for buildings | |
| Test method for minimum and maximum densities of sands | |
| Test method for one-dimensional consolidation properties of soils using constant rate of strain loading | |
| Test method for one-dimensional consolidation properties of soils | |
| Test method for particle size distribution of soils | |
| Test method for performance of building airtightness by fan pressurization | |
| Test method for permeability of saturated soils | |
| Test method for shrinkage parameters of soils | |
| Test method for soil compaction using a rammer (Errata - 1995) | |
| Test method for soil density by the sand replacement method | |
| Test method for tensile properties of fiber reinforced polymer (FRP) bars and grids for reinforcement of concrete | |
| Test method for tensile properties of fiber reinforced polymer (FRP) sheets for reinforcement of concrete | |
| Test method for the California Bearing Ratio (CBR) of soils in laboratory | |
| Test method for the California Bearing Ratio (CBR) of soils in place | |
| Test method for thermal resistance and related properties of thermal insulations -- Part 1: Guarded hot plate apparatus | |
| Test method for thermal resistance and related properties of thermal insulations -- Part 2: Heat flow meter apparatus | |
| Test method for thermal resistance and related properties of thermal insulations -- Part 3: Circular pipe apparatus | |
| Test method for water content of soils (Errata - 1995) | |
| Test Method for Wind Resistance of Windows and Doors | |
| Test method of adsorption/desorptio n effciency for building materials to regulate an indoor humidity - Part 1: Response methods of humidity | |
| Test Method of Air Tightness for Windows and Doors | |
| Test Method of Dew Condensation for Windows and Doors | |
| Test Method of Diagonal Deformation by Static Load for Doorset | |
| Test Method of Surface Resistance to Cold Liquids for Furniture | |
| Test Method of Thermal Performance for Solar Collectors | |
| Test Method of Thermal Performance for Solar Storage Tanks | |
| Test Method of Thermal Resistance for Windows and Doors | |
| Test method of thermal transmission properties for vacuum insulated building components | |
| Test Method of Water Tightness for Windows and Doors | |
| Test method using cone calorimeter measuring heat release rate and smoke production rate for building materials | |
| Test Methods - Components for Raised Access Floor | |
| Test Methods - Resilient Floorcoverings | |
| Test Methods for Bathtubs | |
| Test methods for ceramic tiles - Part 10: Determination of chemical resistance | |
| Test methods for ceramic tiles - Part 11: Determination of lead and cadmium given off by glazed tiles | |
| Test methods for ceramic tiles - Part 12: Determination of slip resistance | |
| Test methods for ceramic tiles - Part 13: Test methods for unit-tiles of quality | |
| Test methods for ceramic tiles - Part 1: Sampling and basis for acceptance | |
| Test methods for ceramic tiles - Part 2: Determination of surface quality, dimensions and crook, warp and rectangularity, shape and height of back feet, and angle for trim tiles | |
| Test methods for ceramic tiles - Part 3: Determination of water absorption, apparent porosity and bulk density | |
| Test methods for ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength | |
| Test methods for ceramic tiles - Part 5: Determination of resistance to deep abrasion for unglazed floor tiles | |
| Test methods for ceramic tiles - Part 6: Determination of resistance to surface abrasion for glazed floor tiles | |
| Test methods for ceramic tiles - Part 7: Determination of resistance to thermal shock | |
| Test methods for ceramic tiles - Part 8: Determination of crazing resistance for glazed tiles | |
| Test methods for ceramic tiles - Part 9: Determination of frost resistance | |
| Test methods for door fittings | |
| Test methods for durability of wood-plastic recycled composite (Amendment 1) | |
| Test methods for durability of wood-plastic recycled composite | |
| Test Methods for Frost Resistance of Exterior Wall Materials of Buildings (Freezing and Thawing Method) | |
| Test Methods for Locks | |
| Test methods for moisture resistance of boards for interior system of building (Amendment 1) | |
| Test methods for moisture resistance of boards for interior system of building | |
| Test methods for movement capability of coatings and sheets fully adhered on substrate | |
| Test methods for performance of floor-hinges, door-closers and hinge-closers | |
| Test methods for screw for timber structure (Amendment 1) | |
| Test methods for screw for timber structure | |
| Test Methods for Thermal Transmission Properties of Thermal Insulations | |
| Test methods for water resistance of exterior wall boards for building (Amendment 1) | |
| Test methods for water resistance of exterior wall boards for building | |
| Test methods of bending and impact for building boards (Amendment 1) | |
| Test Methods of Bending and Impact for Building Boards | |
| Testing method for incombustibility of internal finish material and procedure of buildings (Amendment 1) | |
| Testing Method for Incombustibility of Internal Finish Material and Procedure of Buildings | |
| Testing Method for Incombustibility of Thin Materials for Buildings | |
| Testing Method for Thermal Resistance of Heat Insulating Materials for Dwellings | |
| Testing methods for bond strength of adhesives and of installed glue-joints in anchoring wooden block | |
| Testing Methods for Bond Strength of Adhesives and of Installed Glue-Joints in Wall and Ceiling Boards | |
| Testing methods for bonding strength of wall boards adhesives | |
| Testing Methods for Bulk Specific Gravity, Water Content, Absorption and Compressive Strength of Cellular Concrete | |
| Testing methods for volume change of cellular concrete | |
| Testing methods of materials for ceiling suspension system | |
| Testing methods of sealants for sealing and glazing in buildings | |
| Thermal insulating materials and products for buildings - Procedures for determining declared and design thermal values | |
| Thermal insulation -- Building elements -- In-situ measurement of thermal resistance and thermal transmittance -- Infrared method for frame structure dwelling | |
| Thermal insulation -- Test method for thermal diffusivity -- Periodic heat method | |
| Thermal insulation -- Vocabulary | |
| Thermal performance of curtain walling - Calculation of thermal transmittance | |
| Thermal performance of metal curtain walling -- Simplified calculation method of thermal transmittance and solar heat gain coefficient | |
| Thermal performance of windows and doors - Calculation of solar heat gain coefficient | |
| Thermal performance of windows and doors - Calculation of thermal transmittance - Part 1: General | |
| Thermal performance of windows and doors - Calculation of thermal transmittance - Part 2: Numerical method for frames | |
| Thermal performance of windows and doors - Determination of solar heat gain coefficient | |
| Toilet Seat with Douche to Wash Anus with Warm Water | |
| Toilet unit for dwellings | |
| Vanities and medicine cabinets | |
| Vector-digital geological-map - Quality requirements and subject attribute codes | |
| Vermiculites | |
| Wall type kitchen unit for dwellings | |
| Warm air furnaces (Amendment 1) | |
| Warm air furnaces | |
| Windows (Amendment 2) | |
| Windows -- Repeated opening and closing test | |
| Windows and doors \x96\x96 Resistance to repeated opening and closing \x96\x96 Test method | |
| Windows and Doorsets - Mechanical Deformation Test of Edge Rail | |
| Windows and doorsets -- Diagonal deformability -- Test method | |
| Windows and doorsets -- Thermal resistance test | |
| Windows |
| << Prev | Next >> |