Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
550
600
650
700
750
800
840
850
860
870
880
890
897
898
899
900
901
902
903
904
905
906
907
908
909
910
920
930
940
950
960
1000
1050
1100
1150
1200
1250
1500
1620
| Product Name | Notes |
|---|---|
| 1995 JOINT ASSOCIATION SURVEY ON DRILLING COSTS | |
| A Procedure for Performing SWEAT | |
| ABBREVIATIONS FOR USE ON DRAWINGS, AND IN SPECIFICATIONS, STANDARDS AND TECHNICAL DOCUMENTS | |
| Aeroplane Flight Simulation Training Devices | |
| Asphalt Sheet for Automobiles | |
| Automatic Transmission Hoses for Automobiles | |
| Automobile diesel engine oils \x96 Detergency test procedure | |
| Automobile gasoline engine oils \x96 Firing fuel economy test procedure for aged oils | |
| Automobiles - Clock Extension Peripheral Interface (CXPI) - Part 3: Protocol specification | |
| Automobiles - Clock Extension Peripheral Interface (CXPI) - Part1: General Information and Use Cases Definition | |
| Automobiles - Clock Extension Peripheral Interface (CXPI) -Part 5: Protocol Conformance Test specification | |
| Automobiles \x96 Analytical procedure for measurement of ammonia concentration in raw exhaust gas | |
| Automobiles \x96 Requirements and evaluation methods of chassis dynamometers \x96 Supplement to fuel consumption tests | |
| Automotive fuel ? Measurement of acid value increase in diesel fuel | |
| Automotive fuel ? Measurement of methanol content in diesel fuel ? Water extraction ? Method using gas chromatograph with flame ionization detector | |
| Automotive fuel ? Measurement of oxidation stability of diesel fuel ? Rapid small scale oxidation test method | |
| Automotive parts - Automotive cables - Part 3: Low-voltage copper conductor cables | |
| Automotive parts - Automotive cables - Part 4: Low-voltage aluminium conductor cables | |
| Automotive parts - Blind plug | |
| Automotive Parts - Color Code for Wiring Harness | |
| Automotive Parts - Electric Outlets and Plugs for Car Accessories | |
| Automotive parts - Engine EGR cooler - Heat dissipation test methods | |
| Automotive parts - Hexagon nuts with flange | |
| Automotive parts - Submergence test methods for power window switches | |
| Automotive Parts - Test methods and general performance requirements for wiring harness connectors | |
| Automotive parts \x96 Brake disc test methods Part 1: Material properties | |
| Automotive parts \x96 High-voltage cables | |
| Automotive parts \x96 Oil cooler for powertrain \x96 Heat dissipation test methods | |
| Automotive parts \x96 Test methods of automobile high voltage relays | |
| Automotive parts \x97 Automotive cables \x97 Part 5: High-voltage copper conductor cables | |
| Automotive parts \x97 Automotive cables \x97 Part 6: High-voltage aluminium conductor cables | |
| Blade Type Electric Fuse-Links for Automobiles | |
| BOXES, WOOD, FIBERBOARD-LINED FOR OVERSEAS SHIPMENT (FOR WEIGHT OF CONTENTS NOT EXCEEDING 500 POUNDS) | |
| CABLE AND WIRE, ELECTRICAL (POWER, FIXED INSTALLATION) | |
| CABLE AND WIRE, INSULATED; METHODS OF SAMPLING AND TESTING | |
| CABLE AND WIRE, POWER, ELECTRICAL, (SERVICE-ENTRANCE AND SERVICE-DROP) | |
| CABLE AND WIRE, POWER, ELECTRICAL, NONMETALLIC-SHEATHED | |
| CABLE AND WIRE, POWER, ELECTRICAL, VARNISHED-CLOTH-INSU LATED, (0- TO 5) | |
| CABLE ASSEMBLY, POWER, ELECTRICAL, FOR 125-VOLT, 250-VOLT, AND 125/250-VOLT, 50-60 HZ, EQUIPMENT | |
| CABLE ASSEMBLY, POWER, ELECTRICAL | |
| CABLE, CORD, AND WIRE, ELECTRIC, FLEXIBLE, COTTON-COVERED (GENERAL SERVICE) | |
| CABLE, POWER, ELECTRICAL (FLEXIBLE CORD AND FIXTURE WIRE) | |
| CABLE, POWER, ELECTRICAL AND WIRE ELECTRICAL (WEATHER-RESISTANT) | |
| CABLE, POWER, ELECTRICAL, (ARMORED INCLUDING LEAD-COVERED TYPES AND ARMORED CORD) | |
| CABLE, POWER, ELECTRICAL, (RUBBER-INSULATED, GENERAL PURPOSE) AND WIRE, ELECTRICAL (RUBBER-INSULATED, GENERAL PURPOSE) | |
| CABLE, POWER, ELECTRICAL, AND WIRE, ELECTRICAL (ASBESTOS INSULATED AND ASBESTOS-VARNISHED-C LOTH INSULATED, 0-TO 5000-VOLT SERVICE) | |
| CABLE, SPECIAL PURPOSE, ELECTRICAL, AND WIRE ELECTRICAL, SHOT FIRING | |
| CABLE, TELEPHONE (W-108-B) | |
| Carpet for Automobiles | |
| CASTABLE MIX, REFRACTORY, HIGH-TEMPERATURE HYDRAULIC SETTING | |
| Characterization of Hybrid Polymeric Materials, Guideline for | |
| CMOS Semicustom Design Guidelines | |
| COATING COMPOUND, BITUMINOUS, SOLVENT CUT BACK, BOX AND CRATE TOPCOATING | |
| Coating Films for Automobile Plastic Parts | |
| CORD, ELECTRICAL AND WIRE, ELECTRICAL (0- TO 600- VOLT SERVICE) | |
| CRATE, WOOD, OPEN; MAXIMUM CAPACITY 2,500 POUNDS | |
| CRATES, WOOD: LUMBER AND PLYWOOD SHEATHED, NAILED, AND BOLTED | |
| Dimension of V-Ribbed Pulley Grooves for Automotive Engines | |
| Discontinuing Use of the Machine Model for Device ESD Qualification | |
| ENAMEL, DECK, INTERIOR, GRAY (FORMULA NO. 20L) (METRIC) | |
| Failure Mechanisms and Models for Semiconductor Devices | |
| Failure Mechanisms and Models for Silicon Semiconductor Devices | |
| FOUNDRY PROCESS QUALIFICATION GUIDELINES (Wafer Fabrication Manufacturing Sites) | |
| FOUNDRY PROCESS QUALIFICATION GUIDELINES \x96 BACKEND OF LINE (Wafer Fabrication Manufacturing Sites) | |
| FOUNDRY PROCESS QUALIFICATION GUIDELINES \x96 FRONT END TRANSISTOR LEVEL (Wafer Fabrication Manufacturing Sites) | |
| FOUNDRY PROCESS QUALIFICATION GUIDELINES \x96 PRODUCT LEVEL (Wafer Fabrication Manufacturing Sites) | |
| FOUNDRY PROCESS QUALIFICATION GUIDELINES \x96 TECHNOLOGY QUALIFICATION VEHICLE TESTING (Wafer Fabrication Manufacturing Sites) | |
| Frontal Barrier Collision Test Procedure for Passenger Cars | |
| Frontal Collision Test Procedure for Determining Steering Control Displacement for Passenger Cars | |
| GASKET MATERIALS, SYNTHETIC RUBBER, 50 AND 65 DUROMETER HARDNESS | |
| GENERAL DRAWING PRACTICE | |
| General Requirements for Distributors of Military Semiconductor Devices | |
| General Rules of Environmental Testing Methods for Automotive Electronic Equipment | |
| Glossary of Terms Relating to Diagnosis for Electronic Systems of Automobiles | |
| Graphic Symbols for Brake Piping Diagrams of Automobiles | |
| Guidance for EMC test methods of vehicle electrical and electronic component | |
| Guide for Standard Probe Pad Sizes and Layouts for Wafer-Level Electrical Testing | |
| Guideline for Developing and Documenting Package Electrical Models Derived from Computational Analysis | |
| Guideline for Measurement of Electronic Package Inductance and Capacitance Model Parameters | |
| Guideline For Swappable Batteries Of Electric Two Wheel Vehicles | |
| Guidelines Concerning Electrical Reliability of 42 V Electrical Connectors For Automobiles | |
| Guidelines concerning operating conditions for stop and start systems | |
| Guidelines concerning operation method and indication for electrical key system | |
| Guidelines for daily check of solid particle number measurement equipments for vehicle emissions | |
| Guidelines for GaAs MMIC and FET Life Testing | |
| Guidelines for GaAs MMIC PHEMT/MESFET and HBT Reliability Accelerated Life Testing | |
| Guidelines for MIL-STD-883 Screening and QCI Optimization | |
| Guidelines for Packing and Labeling of Integrated Circuits in Unit Container Packing (Tubes, Trays, and Tape and Reel) | |
| Guidelines for Packing and Labeling of Integrated Circuits in Unit Container Packing | |
| Guidelines for Particle Impact Noise Detection (PIND) Testing, Operator Training and Certification | |
| Guidelines for Particle Impact Noise Detection (PIND) Testing, Operator Training, and Certification | |
| Guidelines for quality verification methods for new adoption approval of automotive semiconductor devices | |
| Guidelines for the Measurement of Thermal Resistance of GaAs FETs | |
| Guidelines for the Packing, Handling and Repacking of Moisture-Sensitive Components | |
| Helicopter Flight Simulation Training Devices | |
| High temperature oxidation stability test procedure for evaluating automobile gasoline engine oils | |
| Hot-dip zinc-coated steel sheets and coils for automobile structural uses | |
| Impedance equivalence test method of automotive electrical and electronic devices and components | |
| Index of Terms and Abbreviations Defined in JEDEC Publications | |
| Investigation of Method for measuring 1-nitropyrene in exhaust gas from gasoline/diesel engine | |
| Investigation of Method for measuring aldehydes in exhaust gas from gasoline/diesel engine | |
| Investigation of Method for measuring ammonia in exhaust gas from gasoline/diesel engine | |
| Investigation of Method for measuring dinitrogen monoxide in exhaust gas from gasoline/diesel engine | |
| Investigation of Method for measuring hydrocarbons in exhaust gas from gasoline/diesel engine | |
| Investigation of Method for measuring polycyclic aromatic hydrocarbon in exhaust gas from gasoline/diesel engine | |
| JAPANESE PHARMACOPOEIA | |
| JAR-21 Amendment 3 | |
| JAR-21 Amendment 7 | |
| JAR-22 Amendment 6 | |
| JAR-22 Amendment 7 | |
| JAR-22 Amendment 8 | |
| JAR-22 Amendment 9 | |
| JAR-22 Change 1 | |
| JAR-22 Change 2 | |
| JAR-22 Change 3 - Orange Paper 22/84/1 | |
| JAR-22 Change 3 - Orange Paper 22/85/1 | |
| JAR-22 Change 3 - Orange Paper 22/86/1 | |
| JAR-22 Change 3 | |
| JAR-22 Change 4 - Orange Paper 22/90/1 | |
| JAR-22 Change 4 - Orange Paper 22/91/1 | |
| JAR-22 Change 4 - Orange Paper 22/92/1 | |
| JAR-22 Change 4 - Orange Paper 22/94/1 | |
| JAR-22 Change 4 | |
| JAR-22 Change 5 | |
| JAR-22 First issue | |
| JAR-23 Amendment 1 | |
| JAR-23 Amendment 2 | |
| JAR-23 Amendment 3 | |
| JAR-23 First issue | |
| JAR-25 Amendment 16 | |
| JAR-25 Amendment 17 | |
| JAR-25 Amendment 18 | |
| JAR-25 Amendment 19 | |
| JAR-25 Amendment 20 | |
| JAR-25 Change 10 - Orange Paper 25/84/1 | |
| JAR-25 Change 10 - Orange Paper 25/84/2 | |
| JAR-25 Change 10 - Orange Paper 25/84/3 | |
| JAR-25 Change 10 - Orange Paper 25/85/1 | |
| JAR-25 Change 10 - Orange Paper 25/85/2 | |
| JAR-25 Change 10 | |
| JAR-25 Change 11 - Orange Paper 25/86/1 | |
| JAR-25 Change 11 - Orange Paper 25/86/2 | |
| JAR-25 Change 11 - Orange Paper 25/87/1 | |
| JAR-25 Change 11 - Orange Paper 25/87/2 | |
| JAR-25 Change 11 | |
| JAR-25 Change 12 - Orange Paper 25/88/1 | |
| JAR-25 Change 12 | |
| JAR-25 Change 13 - Orange Paper 25/90/1 | |
| JAR-25 Change 13 - Orange Paper 25/91/1 | |
| JAR-25 Change 13 - Orange Paper 25/93/1 | |
| JAR-25 Change 13 | |
| JAR-25 Change 14 - Orange Paper 25/96/1 | |
| JAR-25 Change 14 | |
| JAR-25 Change 15 | |
| JAR-25 Change 1 | |
| JAR-25 Change 2 | |
| JAR-25 Change 3 | |
| JAR-25 Change 4 | |
| JAR-25 Change 5 | |
| JAR-25 Change 6 | |
| JAR-25 Change 7 - Orange Paper 25/81/1 | |
| JAR-25 Change 7 | |
| JAR-25 Change 8 - Orange Paper 25/81/2 | |
| JAR-25 Change 8 - Orange Paper 25/82/1 | |
| JAR-25 Change 8 - Orange Paper 25/82/2 | |
| JAR-25 Change 8 | |
| JAR-25 Change 9 - Orange Paper 25/83/1 | |
| JAR-25 Change 9 - Orange Paper 25/83/2 | |
| JAR-25 Change 9 - Orange Paper 25/83/3 | |
| JAR-25 Change 9 | |
| JAR-25 First issue | |
| JAR-25 Pre-issue | |
| JAR-26 Amendment 1 | |
| JAR-26 Amendment 2 | |
| JAR-26 Amendment 3 | |
| JAR-26 First issue | |
| JAR-27 Amendment 2 | |
| JAR-27 Amendment 3 | |
| JAR-27 Amendment 4 | |
| JAR-27 Amendment 5 | |
| JAR-27 Amendment 6 | |
| JAR-27 Change 1 | |
| JAR-29 Amendment 2 | |
| JAR-29 Amendment 3 | |
| JAR-29 Amendment 4 | |
| JAR-29 Amendment 5 | |
| JAR-29 Amendment 6 | |
| JAR-29 Change 1 | |
| JAR-29 First issue - Orange Paper 29/98/1 | |
| JAR-29 First issue | |
| JAR-39: Airworthiness Directives | |
| JAR-E Amendment 14 | |
| JAR-E Change 3 | |
| JAR-E Change 8 - Orange Paper E/93/1 | |
| JAR-FCL 1 Amendment 7 | |
| JAR-FCL 2 Amendment 6 | |
| JAR-FCL 3 Amendment 1 | |
| JAR-FCL 3 Amendment 2 | |
| JAR-FCL 3 Amendment 3 | |
| JAR-FCL 3 Amendment 5 | |
| JAR-FCL 3 First issue - Orange Paper FCL 3/99/1 | |
| JAR-FCL 3 First issue | |
| JAR-FCL 4 Amendment 3 | |
| JAR-P Amendment 9 | |
| JAR-TSO Amendment 6 | |
| JAR-VLA Amendment 2 | |
| Jasmine JavaScript Testing | |
| Java 7 Concurrency Cookbook | |
| Java EE Development with Eclipse | |
| JavaScript and JSON Essentials | |
| Javascript: Object Oriented Programming | |
| Jenkins Continuous Integration Cookbook | |
| Jenkins Essentials | |
| Joint Association Survey on Drilling Costs 2009: U.S. Summary Tables of Estimated Costs of Drilling and Equipping Wells-States and Regions | |
| Joint Aviation Requirements -JAR-1 Definitions and Abbreviations Issue 1 Amendment 6 | |
| Liquefied Petroleum Gas Vehicles - Refuelling Connector | |
| MAGNESIUM FLUORIDE (OPTICAL USE) | |
| MAGNESIUM POWDER - FOR USE IN AMMUNITION | |
| MAGNESIUM STEARATE (OINTMENT TYPE) | |
| MAGNESIUM-ALUMINUM ALLOY, POWDERED | |
| MANGANESE, POWDERED (FOR USE IN AMMUNITION) | |
| Master Minimum Equipment List / Minimum Equipment List | |
| MATS, CARGO | |
| Measurement methods for electromagnetic field of vehicles with regards to human exposure | |
| Measurements of Noise Inside Motor Vehicles | |
| MERCUROUS CHLORIDE (CALOMEL) (FOR ORDNANCE USE) | |
| MERCURY FULMINATE | |
| METER, PHOTOGRAPHIC EXPOSURE, LM-46( ) | |
| Methods of Measurement for Semiconductor Logic Gating Microcircuits | |
| Methods of Measurement of Radio Interference Characteristics of Automobiles | |
| Methods of Measurement of Radio Noise Suppressor Characteristics for Internal Combustion Engine Spark Ignition System | |
| MOLDING COMPOUNDS, THERMOSETTING | |
| Motorcycles - Four Stroke Cycle Gasoline Engine Oils - Friction Properties Test for the Clutch Systems | |
| Motorcycles \x96 Hands-off straightability test procedure | |
| NICKEL, POWDERED (FOR USE IN AMMUNITION) | |
| OIL, CUTTING, MINERAL-LARD, SULFUR-TREATED | |
| OINTMENT, PROTECTIVE, M5 | |
| PACKAGING AND PACKING FOR OVERSEAS SHIPMENT TAPE, ADHESIVE, PRESSURE-SENSITIVE, WATER RESISTANT | |
| PACKAGING AND PACKING FOR OVERSEAS SHIPMENT, GENERAL SPECIFICATION | |
| PACKAGING AND PACKING FOR OVERSEAS SHIPMENT-BARRIER-MAT ERIALS, WATERPROOF, FLEXIBLE | |
| PACKAGING AND PACKING FOR OVERSEAS SHIPMENT-BOXES; WOOD, NAILED | |
| PACKING, COIL-FORM, STUFFING-TUBE AND TERMINAL-TUBE (FOR ELECTRIC CABLES) | |
| PAINT, INSIDE, LIGHT-GRAY, FIRE-RESISTANT | |
| PAINT, INSIDE, LIGHT-GREEN, SEMI-GLOSS, FIRE-RETARDANT | |
| PAINT, INSIDE, WHITE, SEMI-GLOSS, FIRE-RETARDANT | |
| PAPER, MUSIC WRITING | |
| Passenger car \x96 Disc brake motor on caliper bench test procedure | |
| Passenger cars - Braking device - Dynamometer test procedure | |
| PENTOLITE, 50/50 | |
| Phosphate Coating for Steel | |
| PIGMENT, SYNTHETIC, BLACK (OINTMENT TYPE) | |
| PIGMENT, SYNTHETIC, RED (OINTMENT TYPE) | |
| PLASTIC RODS AND TUBES, THERMOSETTING, LAMINATED | |
| PLASTIC SHEET AND PLASTIC ROD, THERMOSETTING, CAST | |
| PLASTIC-MATERIAL, LAMINATED, THERMOSETTING (FOR DESIGNATION PLATES) | |
| PLASTIC-MATERIALS, LAMINATED, THERMOSETTING: SHEETS AND PLATES | |
| PLUGS, TELEPHONE, AND ACCESSORY SCREWS, GENERAL SPECIFICATION FOR | |
| Polyvinylchloride Coated Fabric for Automobiles | |
| Polyvinylchloride Sheets for Automobiles | |
| POT, SMOKE, FLOATING, HC, M4A2 | |
| POTASSIUM PERCHLORATE | |
| POTASSIUM SULFATE (FOR ORDNANCE USE) | |
| Potential Failure Mode and Effects Analysis (FMEA) | |
| POWDER, BLACK, SODIUM NITRATE | |
| Powder, Black, Sodium-Nitrate | |
| POWDER, PROPELLANT, M10 | |
| POWDER, PROPELLENT, 4.2-INCH CHEMICAL MORTAR | |
| Power MOSFET Electrical Dose Rate Test Method | |
| PRESERVATION, METHODS OF | |
| PRIMER, PAINT, ZINC-CHROMATE, ALKYD TYPE | |
| PRIMER, SYNTHETIC, LACQUER-RESISTING | |
| Procedure for Executing SWEAT | |
| Process Characterization Guideline | |
| Process Failure Mode and Effects Analysis (FMEA) | |
| Qualification and Acceptance of Particle Getters for Use in Hybrid Microelectronic Applications, Test Method for | |
| Radiator Cleaners | |
| Radiator corrosion inhibitors for automobiles | |
| Radio Antennas for Automobiles | |
| Recommended Characterization of MOS Shift Registers | |
| Reference Guide to Letter Symbols for Semiconductor Devices | |
| REFRACTORY, CASTABLE, HIGH-TEMIPERATURE HYDRAULIC-SETTING | |
| Requirements for Class B Microcircuits | |
| Requirements for Microelectronic Screening and Test Optimization | |
| RESISTOR, VARIABLE, WIRE-WOUND (LOW OPERATING TEMPERATURE), GENERAL SPECIFICATION FOR | |
| Review of Automotive Engineering | |
| Road vehicles - Brake stopping distance test procedure | |
| Road vehicles \x96 Classification and use cases for driver override (Automated driving system level 3) | |
| Road vehicles \x96 Performance requirements and evaluation method of chassis dynamometer test system for the purpose of reproducing driving conditions on the road Part 1: Calculation method for quantitative evaluation... | |
| Road vehicles \x96 Performance requirements and evaluation method of chassis dynamometer test system for the purpose of reproducing driving conditions on the road Part 2: Evaluation of effectiveness of tire... | |
| Road vehicles \x96 Performance requirements and evaluation method of chassis dynamometer test system for the purpose of reproducing driving conditions on the road | |
| Road vehicles interior parts Measurement methods of diffused volatile organic compounds (VOCs) | |
| Rotary shaft lip type seals | |
| SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES | |
| Seat Belt Anchorages for Buses | |
| Seat Belt Anchorages for Trucks | |
| Selection of Fuse-Links for Automobile Wiring | |
| Shape and Dimensions of Hydraulic Brake Cylinders | |
| SHELL, SHOTGUN, 12-GAGE | |
| SHELLAC SOLUTIONS (FOR USE IN AMMUNITION) | |
| Simplified Drawing Methods for Brake Pipes of Automobiles | |
| SIRENS, ELECTRIC, 2 AND 5 HORSEPOWER | |
| Small Rotorcraft | |
| SODIUM OXALATE, TECHNICAL (METRIC) | |
| SODIUM | |
| SOLDER; LOW-MELTING-POINT | |
| SORBITAN TRIOLEATE (FOR USE IN AMMUNITION) | |
| SPONGE, LOOFA | |
| Springs, Slide, 4.2-Inch Chemical Mortar Barrel, C3 and C4 | |
| Standard Manufacturer's Identification Code | |
| Standard Manufacturer\x92s Identification Code | |
| STEEL, SPRING, ROUND OR SQUARE (INCLUDING RECTANGULAR SECTIONS HAVING THICKNESSES GREATER THAN HALF THEIR WIDTH) | |
| Suggested Product-Documentatio n Classification and Disclaimers | |
| Symbol and Labels for Moisture-Sensitive Devices | |
| Technical background of \x93JASO M 609: 2024, Corrosion test methods for automobile parts and materials\x94 | |
| Terminology and Methods of Measurement for Bistable Semiconductor Microcircuits | |
| Test Method for Brake Fluid Level System | |
| Test method for oxidation stability of automotive gear oils | |
| Test Method for Qualification and Acceptance of Circuit Support Films for Use in Microelectronic Applications | |
| Test method for rotary shaft lip type seals | |
| Test Procedures for Automobile Tire Uniformity | |
| Testing Methods for Automotive Serial Data Communication System | |
| TIN, PULVERIZED | |
| TITANIUM DIOXIDE (OINTMENT TYPE) | |
| TOLUENE | |
| TREATMENT AND PAINTING OF MATERIEL | |
| Trochoid Type Oil Pump Rotor for Automobiles | |
| Under Body Coatings | |
| WATCH, CHRONOMETER | |
| WAX (CANDELILLA) | |
| WELDING SYMBOLS [USE AWS A2.0] | |
| WIRE, MAGNET, ELECTRICAL |
| << Prev | Next >> |