Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
400
450
500
550
600
650
680
690
700
710
720
730
736
737
738
739
740
741
742
743
744
745
746
747
748
750
760
770
780
790
800
850
900
950
1000
1050
1100
1500
1620
| Product Name | Notes |
|---|---|
| Acoustics - Measurement of sound pressure levels in the interior of aircraft during flight | |
| Acoustics \x96 Determination of sound power levels and sound energy levels of noise sources using sound pressure \x96 Engineering methods for small movable sources in reverberant fields \x96 Part 1:... | |
| Acoustics \x96 Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation test room | |
| Acoustics \x96 Determination of sound power levels of noise sources using sound pressure \x96 Engineering methods for small, movable sources in reverberant fields \x96 Part 2: Methods for special reverberation... | |
| Acoustics \x96 Determination of uncertainties associated with sound emission measures \x96 Part 1: Sound power levels determined from sound pressure measurements | |
| Acoustics \x96 Hearing protectors \x96 Part 1: Subjective method for the measurement of sound attenuation | |
| Acoustics \x96 Hearing protectors \x96 Part 6: Determination of sound attenuation of active noise reduction earmuffs | |
| Acoustics \x96 Measurement of noise inside motor vehicles | |
| Acoustics \x96 Measurements of sound pressure level emitted by stationary road vehicles \x96 AMENDMENT 1 | |
| Acoustics \x96 Measurements of sound pressure level emitted by stationary road vehicles | |
| Acoustics \x96 Method for calculating loudness level | |
| Acoustics \x96 Methods for calculating loudness \x96 Part 1: Zwicker method | |
| Acoustics \x96 Methods for calculating loudness \x96 Part 2: Moore-Glasberg method | |
| Acoustics \x96 Methods for calculating loudness \x96 Part 3: Moore-Glasberg-Schli ttenlacher method | |
| Acoustics \x96 Reference zero for the calibration of audiometric equipment \x96 Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions | |
| Agricultural machinery \x96 Safety \x96 Part 17: Root crop harvesters | |
| Agricultural machinery \x96 Safety \x96 Part 1: General requirements \x96 Amendment 1 | |
| Agricultural machinery \x96 Safety \x96 Part 6: Sprayers and liquid fertilizer distributors | |
| Agricultural sprayers - Connection threading | |
| Agricultural sprayers \x96 Recording of spray drift parameters | |
| Agricultural tractors - Rear-mounted power take-off types 1, 2, 3 and 4 - General specifications, safety requirements, dimensions for master shield and clearance zone | |
| Agricultural tractors - Rear-mounted power take-off types 1, 2, 3 and 4 - Main PTO dimensions and spline dimensions, location of PTO | |
| Agricultural wheeled tractors - Maximum speeds - Method of determination | |
| Air cargo \x96 Non-certified lower deck containers \x96 Design and testing | |
| Air quality - General aspects - Vocabulary | |
| Aircraft \x96 Jacking pads | |
| Anaesthetic and respiratory equipment \x96 Breathing sets and connectors | |
| Anaesthetic and respiratory equipment \x96 Vocabulary | |
| Anaesthetic reservoir bags | |
| Animal and vegetable fats and oils \x96 Determination of iodine value | |
| Animal and vegetable fats and oils \x96 Determination of saponification value | |
| Animal feeding stuffs - Determination of castor oil seed husks - Microscope method | |
| Anti-bribery management systems \x96 Requirements with guidance for use | |
| Asset management - Management systems - Requirements | |
| Asset management - Overview, principles and terminology | |
| Asset management \x96 Guidance for the development of public policy to enable asset management | |
| Asset management \x96 Management systems \x96 Guidelines for the application of ISO 55001 | |
| Automatic steam traps \x96 Production and performance characteristic tests | |
| Bamboo structures \x96 Engineered bamboo products \x96 Test methods for determination of mechanical properties using small size specimens | |
| Bases for design of structures - Names and symbols of physical quantities and generic quantities | |
| Benefit-risk assessment for sports and recreational facilities, activities and equipment | |
| Binders for paints and varnishes \x96 Determination of hydroxyl value \x96 Part 3: Rapid test | |
| Binders for paints and varnishes \x96 Determination of softening point \x96 Part 1: Ring-and-ball method | |
| Biotechnology \x96 Genome editing \x96 Part 1: Vocabulary \x96 Amendment 1 | |
| Biotechnology \x96 Genome editing \x96 Part 1: Vocabulary | |
| Brown coals and lignites - Determination of humic acids | |
| Brown coals and lignites - Determination of the volatile matter in the analysis sample - Part 1: Two-furnace method | |
| Brown coals and lignites - Determination of true relative density and apparent relative density | |
| Burning behaviour of textiles and textile products - Vocabulary | |
| Calculation methods for energy efficiency and energy consumption variations at country, region and city levels | |
| Camera shutters \x96 Timing \x96 General definition and mechanical shutter measurements | |
| Chain of custody of wood and wood-based products | |
| Chromate conversion coatings on electroplated zinc and cadmium coatings | |
| Cigarettes \x96 Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine AMENDMENT 2 | |
| Cigarettes \x96 Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine | |
| Civil small and light unmanned aircraft (UA) \x96 Sharp injury to human body by rotor blades \x96 Evaluation and test method | |
| Civil small and light unmanned aircraft systems (UAS) \x96 Vibration test methods | |
| Civil small and light unmanned aircraft systems (UAS) under low-pressure conditions \x96 Test methods | |
| Coal - Determination of the crucible swelling number | |
| Codes for the representation of currencies | |
| Cold-reduced carbon steel sheet of structural quality | |
| Complete filled transport packages - Distribution trials - Information to be recorded | |
| Compliance management systems \x96 Guidance for competence management | |
| Compliance management systems \x96 Requirements with guidance for use | |
| Conveyor belts \x96 Method for the determination of the tear propagation resistance of textile conveyor belts | |
| Corrosion of metals and alloys \x96 Corrosion test method for disinfectant \x96 Total immersion method | |
| Corrosion of metals and alloys \x96 Electrochemical test methods for high-temperature corrosion testing of metallic materials in molten salts | |
| Corrosion of metals and alloys \x96 Method of oxalic acid etching test for intergranular corrosion of austenitic stainless steel | |
| Corrosion of metals and alloys \x96 Uniaxial constant-load test method for evaluating susceptibility of metals and alloys to stress corrosion cracking in high-purity water at high temperatures | |
| Cycle energy requirement \x96 Test method | |
| Cycles \x96 Safety requirements for bicycles \x96 Part 1: Vocabulary | |
| Cycles \x96 Safety requirements for bicycles \x96 Part 2: Requirements for city and trekking, young adult, mountain and racing bicycles | |
| Cycles \x96 Safety requirements for bicycles \x96 Part 3: Common test methods | |
| Cycles \x96 Safety requirements for bicycles \x96 Part 4: Braking test methods | |
| Cycles \x96 Safety requirements for bicycles \x96 Part 5: Steering test methods | |
| Cycles \x96 Safety requirements for bicycles \x96 Part 6: Frame and fork test methods | |
| Cycles \x96 Safety requirements for bicycles \x96 Part 7: Wheel and rim test methods | |
| Cycles \x96 Safety requirements for bicycles \x96 Part 8: Pedal and drive system test methods | |
| Cycles \x96 Safety requirements for bicycles \x96 Part 9: Saddles and seat-post test methods | |
| Cylinder valve outlets for gases and gas mixtures - Selection and dimensioning | |
| Dentistry -- Polymer-based restorative materials | |
| Dentistry \x96 Designation system for tooth developmental stages | |
| Dentistry \x96 Elastomeric impression and bite registration materials | |
| Dentistry \x96 Endodontic instruments \x96 Part 1: General requirements | |
| Dentistry \x96 Endodontic instruments \x96 Part 2: Enlargers | |
| Dentistry \x96 Endodontic instruments \x96 Part 3: Compactors | |
| Dentistry \x96 Endodontic instruments \x96 Part 5: Shaping and cleaning instruments | |
| Dentistry \x96 Evaluation of antibacterial activity of dental restorative materials, luting materials, fissure sealants and orthodontic bonding or luting materials | |
| Dentistry \x96 Mobile dental units and dental patient chairs \x96 Part 1: General requirements | |
| Dentistry \x96 Mobile dental units and dental patient chairs \x96 Part 2: Air, water, suction and wastewater systems | |
| Dentistry \x96 Polymer-based composite machinable blanks | |
| Design of nuclear power plants against seismic events \x96 Part 5: Seismic instrumentation | |
| Destructive tests on welds in metallic materials \x96 Bend tests | |
| Destructive tests on welds in metallic materials \x96 Longitudinal tensile test on weld metal in fusion welded joints | |
| Destructive tests on welds in metallic materials \x96 Transverse tensile test | |
| Determination of flash point \x96 Method for flash no-flash and flash point by small scale closed cup tester | |
| Earth-moving machinery \x96 Wheeled machines \x96 Steering requirements | |
| Electrodeposited metallic coating and related finishes - Sampling procedures for inspection by attributes | |
| Energy audits \x96 Part 1: General requirements with guidance for use | |
| Energy audits \x96 Part 2: Guidance for conducting an energy audit using ISO 50002-1 in buildings | |
| Energy audits \x96 Part 3: Guidance for conducting an energy audit using ISO 50002-1 in processes | |
| Energy management and energy savings \x96 General guidelines for selecting energy savings evaluators | |
| Energy management systems - Guidance for the implementation, maintenance and improvement of an energy management system | |
| Energy management systems - Measurement and verification of energy performance of organizations - General principles and guidance | |
| Energy management systems - Requirements with guidance for use | |
| Energy management systems \x96 Guidance for implementing a common energy management system in multiple organizations | |
| Energy management systems \x96 Guidelines for a phased implementation | |
| Energy management systems \x96 Measuring energy performance using energy baselines (EnB) and energy performance indicators (EnPI) \x96 General principles and guidance | |
| Energy management systems \x96 Requirements for bodies providing audit and certification of energy management systems | |
| Energy management systems \x96 Requirements with guidance for use | |
| Energy performance of buildings \x96 Building management system \x96 Part 1: Module M10-12 | |
| Energy performance of buildings \x96 Contribution of building automation, controls and building management \x96 Part 1: General framework and procedures | |
| Energy performance of buildings \x96 Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads \x96 Part 3: Calculation procedures regarding adaptive building envelope elements | |
| Energy performance of buildings \x96 Energy requirements and efficiencies of heating, cooling and domestic hot water (DHW) distribution systems \x96 Part 1: Calculation procedures | |
| Energy performance of buildings \x96 Method for calculation of system energy requirements and system efficiencies \x96 Space emission systems (heating and cooling) | |
| Energy performance of buildings \x96 Overarching EPB assessment \x96 Part 3: General principles for determination and reporting of primary energy factors (PEF) and CO2 emission coefficients | |
| Energy services \x96 Guidelines for the assessment and improvement of the energy service to users | |
| Evaluation method for the resonance frequency of the multi-copter UA (unmanned aircraft) by measurement of rotor and body frequencies | |
| Extended farm management information systems data interface (EFDI) \x96 Concept and guidelines | |
| Facility management \x96 Development of a facility management policy | |
| Facility management \x96 Development of a facility management strategy | |
| Facility management \x96 Guidance on strategic sourcing and the development of agreements | |
| Facility management \x96 Influencing organizational behaviours for improved facility outcomes | |
| Facility management \x96 Vocabulary | |
| Fasteners - Thread undercuts for external metric ISO thread | |
| Fasteners \x96 Electroplated coating systems | |
| Fasteners \x96 Hexagon head bolts \x96 Product grade C | |
| Fasteners \x96 Hexagon head bolts \x96 Product grades A and B | |
| Fasteners \x96 Hexagon head screws \x96 Product grade C | |
| Fasteners \x96 Hexagon head screws \x96 Product grades A and B | |
| Fasteners \x96 Hexagon high nuts (style 2) | |
| Fasteners \x96 Hexagon thin nuts (style 0) | |
| Filler metal for brazing \x96 Designation | |
| Financial services \x96 Official organizational roles \x96 Scheme for official organizational roles | |
| Financial services \x96 Unique product identifier (UPI) | |
| Flight performance of civil small and light fixed-wing unmanned aircraft systems (UAS) \x96 Test methods | |
| Fluid power systems and components - Multiple lip packing sets - Methods for measuring stack heights | |
| Fluid power systems and components \x96 Cylinder barrels \x96 Part 1: Requirements for steel tubes with specially finished bores | |
| Fluid systems - Sealing devices - O-rings - Part 1: Inside diameters, cross-sections, tolerances and size identification code | |
| Fluid systems - Sealing devices - O-rings - Part 3: Quality acceptance criteria | |
| Framework for integration and operation of smart community infrastructures \x96 Part 1: Recommendations for considering opportunities and challenges from interactions in smart community infrastructures from relevant aspects through the life... | |
| Framework for integration and operation of smart community infrastructures \x96 Part 2: Holistic approach and the strategy for development, operation and maintenance of smart community infrastructures | |
| Fraud control management systems \x96 Guidance for organizations managing the risk of fraud | |
| Furniture - Tests for surface finishes - Part 2: Assessment of resistance to wet heat | |
| Furniture - Tests for surface finishes - Part 3: Assessment of resistance to dry heat | |
| Furniture \x96 Tests for surface finishes \x96 Part 1: Assessment of resistance to cold liquids | |
| Furniture \x96 Tests for surface finishes \x96 Part 5: Assessment of resistance to abrasion | |
| Gas welding equipment \x96 Pressure gauges used in welding, cutting and allied processes | |
| Gas welding equipment \x96 Rubber hoses for welding, cutting and allied processes | |
| Gear hobs \x96 Accuracy requirements | |
| General methods for predicting energy savings | |
| Genomics informatics \x96 Phenopackets: A format for phenotypic data exchange | |
| Geometrical product specifications (GPS) \x96 Association | |
| Geometrical product specifications (GPS) \x96 Dimensional measuring equipment \x96 Design and metrological characteristics of micrometers for external measurements | |
| Geometrical product specifications (GPS) \x96 Dimensional measuring equipment \x96 Part 1: Design and metrological characteristics of two-point inside micrometers | |
| Geometrical product specifications (GPS) \x96 Rotary axis form-measuring instruments \x96 Design and metrological characteristics | |
| Glass syringes \x96 Determination of extractable tungsten | |
| Glassware \x96 Hydrolytic resistance of the interior surfaces of glass containers \x96 Part 1: Determination by titration method and classification | |
| Glassware \x96 Hydrolytic resistance of the interior surfaces of glass containers \x96 Part 2: Determination by flame spectrometry and classification | |
| Governance of organizations \x96 Developing indicators for effective governance | |
| Governance of organizations \x96 Governance maturity model \x96 Guidance | |
| Governance of organizations \x96 Guidance | |
| Graphic technology and photography \x96 Viewing conditions | |
| Graphical symbols \x96 Safety colours and safety signs \x96 Part 2: Design principles for product safety labels | |
| Guidance on outsourcing | |
| Hard coal - Determination of Hardgrove grindability index | |
| Hardmetals - Compression test. | |
| Hardmetals - Determination of cobalt - Potentiometric method | |
| Hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Fusion method | |
| Hardmetals - Determination of contents of metallic elements by x-ray fluorescence - Solution method | |
| Hardmetals - Determination of titanium - Photometric peroxide method | |
| Hardmetals - Metallographic determination of porosity and uncombined carbon. | |
| Hardmetals - Vickers hardness test | |
| Hardmetals \x96 Metallographic determination of microstructure \x96 Part 1: Photomicrographs and description | |
| Hardmetals \x96 Metallographic determination of microstructure \x96 Part 2: Measurement of WC grain size | |
| Hardmetals \x96 Sampling and testing of powders using sintered test pieces | |
| Hardware for furniture \x96 Strength and durability of hinges and their components \x96 Hinges pivoting on a vertical axis | |
| Health informatics \x96 Interoperability of public health emergency preparedness and response information systems | |
| Health informatics \x96 Standard communication protocol \x96 Computer-assisted electrocardiography | |
| Hexagon head bolts \x96 Product grade B \x96 Reduced shank (shank diameter = pitch diamter) | |
| High velocity oxygen fuel (HVOF) cermet coatings for metallurgical roll components \x96 Guidance with requirements | |
| Hydraulic fluid power - Fluid sample containers - Qualifying and controlling cleaning methods | |
| Hydraulic fluid power - Fluids - Method for coding level of contamination by solid particles | |
| Hydraulic fluid power - Pumps, motors and integral transmissions - Parameter definitions and letter symbols | |
| Hydrometry \x96 Water level measuring devices | |
| Improving transparency in financial and business reporting \x96 Harmonization topics \x96 Part 1: European data point methodology for supervisory reporting | |
| Improving transparency in financial and business reporting \x96 Harmonization topics \x96 Part 2: Guidelines for data point modelling | |
| Improving transparency in financial and business reporting \x96 Harmonization topics \x96 Part 3: Mapping between DPM and MDM | |
| Industrial furnaces and associated processing equipment \x96 Secondary steelmaking \x96 Machinery and equipment for treatment of liquid steel | |
| Industrial trucks \x96 Inspection and repair of fork arms in service on fork-lift trucks | |
| Industrial trucks \x96 Safety requirements and verification \x96 Part 2: Self-propelled variable-reach trucks | |
| Industrial trucks \x96 Safety requirements and verification \x96 Part 4: Driverless industrial trucks and their systems | |
| Industrial trucks \x96 Safety requirements and verification \x96 Part 6: Burden and personnel carriers | |
| Information and documentation - Rules for the abbreviation of title words and titles of publications | |
| Information and documentation \x96 Foundation and vocabulary | |
| Information and documentation \x96 International Standard Recording Code (ISRC) | |
| Information processing - Magnetic tape cassette and cartridge labelling and file structure for information interchange | |
| Information technoloy - Data communication - 37-pole DTE/DCE interface connector and contact number assignments | |
| Investigation of brazeability with spreading and gap-filling test | |
| Iron ores - Determination of fluorine content - Ion-selective electrode method | |
| Laboratory glass and plastic ware \x96 Volumetric instruments \x96 Methods for testing of capacity and for use | |
| Laboratory glassware \x96 Borosilicate glass tubing | |
| Laboratory plastic ware \x96 Volumetric flasks | |
| Leather \x96 Determination of flex resistance \x96 Part 1: Flexometer method | |
| Lifts and service lifts (USA: elevators and dumbwaiters) \x96 Part 6: Passenger lifts to be installed in residential buildings \x96 Planning and selection | |
| Lithopone pigments \x96 General requirements and methods of testing | |
| Loading and unloading of liquefied natural gas (LNG) tank wagons and containers | |
| Management of terminology resources \x96 Terminology extraction | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full \x96 Part 1: General principles and requirements | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full \x96 Part 2: Orifice plates | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full \x96 Part 3: Nozzles and Venturi nozzles | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full \x96 Part 4: Venturi tubes | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full \x96 Part 5: Cone meters | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full \x96 Part 6: Wedge meters | |
| Measurement of fluid flow in closed conduits - Vocabulary and symbols | |
| Measurement of fluid flow in closed conduits \x96 Velocity area method using Pitot static tubes | |
| Measurement of liquid flow in closed conduits - Weighing method | |
| Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 1: M and N categories | |
| Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 2: L category | |
| Measurement of noise emitted by accelerating road vehicles \x96 Engineering method \x96 Part 1: M and N categories | |
| Measurement of noise emitted by accelerating road vehicles \x96 Engineering method \x96 Part 3: Indoor testing M and N categories | |
| Mechanical vibration and shock \x96 Mechanical mounting of accelerometers | |
| Metallic and other inorganic coatings \x96 Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys \x96 Test methods | |
| Metallic coatings \x96 Measurement of coating thickness \x96 Profilometric method | |
| Metallic coatings \x96 Test methods for electrodeposited gold and gold alloy coatings \x96 Part 3: Electrographic tests for porosity | |
| Metallic materials - Dynamic force calibration for uniaxial fatigue testing - Part 1: Testing systems | |
| Metallic materials - Dynamic force calibration for uniaxial fatigue testing - Part 2: Dynamic calibration device (DCD) instrumentation | |
| Metallic materials \x96 Designation of test specimen axes in relation to product texture | |
| Metallic powders - Determination of apparent density - Part 2: Scott volumeter method | |
| Metallic powders \x96 Determination of acid-insoluble content in iron, copper, tin and bronze powders | |
| Metallic powders \x96 Determination of green strength by transverse rupture of rectangular compacts | |
| Metallic powders \x96 Determination of oxygen content by reduction methods \x96 Part 1: General guidelines | |
| Metallic powders \x96 Determination of oxygen content by reduction methods \x96 Part 2: Loss of mass on hydrogen reduction (hydrogen loss) | |
| Metallic powders \x96 Determination of oxygen content by reduction methods \x96 Part 4: Total oxygen by reduction-extraction | |
| Metallic powders \x96 Determination of particle size by dry sieving | |
| Methods for the assessment of departure from roundness - Measurement of variations in radius | |
| Microbiology of food and animal feeding stuffs - Horizontal method for the detection and enumeration of coliforms - Most probable number technique | |
| Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coliforms - Colony-count technique | |
| Milk and milk products - Determination of residues of organochlorine compounds (pesticides) - Part 1: General considerations and extraction methods | |
| Milk and milk products - Determination of residues of organochlorine compounds (pesticides) - Part 2: Test methods for crude extract purification and confirmation | |
| Modular units for machine tool construction - Integral way columns - Floor-mounted type | |
| Molecular biomarkers \x96 Detection of DNA in cotton used for textile production \x96 Part 1: Extraction of DNA from cotton, cottonseed and raw materials derived therefrom | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes for saliva \x96 Isolated human DNA | |
| Mopeds - Engine test code - Net power | |
| Nanotechnologies \x96 In vitro acute nanoparticle phototoxicity assay | |
| Noise measurements for UAS (unmanned aircraft systems) | |
| Non-destructive testing of welds \x96 Phased array ultrasonic testing (UT-PA) for thin-walled steel components \x96 Acceptance levels | |
| Occupational health and safety management \x96 Guidelines for organizations on preventing, controlling and managing infectious diseases | |
| Occupational health and safety management \x96 Psychological health and safety at work \x96 Guidelines for managing psychosocial risks | |
| Occupational health and safety management systems \x96 General guidelines for the implementation of ISO 45001:2018 | |
| Occupational health and safety management systems \x96 Requirements with guidance for use | |
| Packaging - Complete, filled transport packages and unit loads - Unit load dimensions | |
| Packaging \x96 Complete, filled transport packages \x96 General rules for the compilation of performance test schedules | |
| Paints and varnishes - Determination of "soluble" metal content - Part 7: Determination of mercury content of the pigment portion of the paint and of the liquid portion of water-dilutable... | |
| Paints and varnishes \x96 Determination of resistance to filiform corrosion \x96 Part 1: Steel substrates (ISO 4623-1:2018) | |
| Paints and varnishes \x96 Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance \x96 Part 10: Assessment of degree of filiform corrosion | |
| Paints and varnishes \x96 Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance \x96 Part 3: Assessment of degree of rusting | |
| Paints and varnishes \x96 Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance \x96 Part 5: Assessment of degree of flaking | |
| Paints and varnishes \x96 Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance \x96 Part 6: Assessment of degree of chalking by tape method... | |
| Paints and varnishes \x96 Pull-off test for adhesion | |
| Paints and varnishes \x96 Visual comparison of colour of paints | |
| Paints and varnishes \x96 Vocabulary | |
| Paper and board \x96 Determination of grammage | |
| Paper and board \x96 Determination of water absorptiveness \x96 Cobb method | |
| Paper, board, pulps and related terms - Vocabulary - Part 1: Alphabetical index | |
| Paper, board, pulps and related terms - Vocabulary - Part 2: Pulping terminology | |
| Paper, board, pulps and related terms - Vocabulary - Part 3: Paper-making terminology | |
| Paper, board, pulps and related terms - Vocabulary - Part 4: Paper and board grades and converted products | |
| Paper, board, pulps and related terms - Vocabulary - Part 5: Properties of pulp, paper and board | |
| Permeable sintered metal materials - Determination of bubble test pore size | |
| Petroleum and related products \x96 Precision of measurement methods and results \x96 Part 3: Monitoring and verification of published precision data in relation to methods of test | |
| Petroleum and related products \x96 Precision of measurement methods and results \x96 Part 4: Use of statistical control charts to validate 'in-statistical-cont rol' status for the execution of a standard... | |
| Petroleum products - Determination of base number - Perchloric acid potentiometric titration method | |
| Petroleum products - Fuels (class F) - Specifications of gas turbine fuels for industrial and marine applications | |
| Petroleum products \x96 Determination of boiling range distribution \x96 Gas chromatography method | |
| Petroleum products \x96 Determination of sulfated ash in lubricating oils and additives | |
| Petroleum products \x96 Determination of the ignition quality of diesel fuels \x96 Cetane engine method | |
| Photography - Processing chemicals - Specifications for potassium metabisulfite | |
| Physical vapor deposition (PVD) coatings \x96 Contact angle measurement of metallic hydrophobic PVD coatings | |
| Plastics \x96 Determination of burning behaviour by oxygen index \x96 Part 4: High gas velocity test | |
| Plastics \x96 Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources | |
| Plastics \x96 Determination of refractive index | |
| Plastics \x96 Determination of specific aerobic biodegradation rate of solid plastic materials and disappearance time (DT50) under mesophilic laboratory test conditions | |
| Plastics \x96 Determination of tensile properties \x96 Part 1: General principles | |
| Plastics \x96 Determination of tensile properties \x96 Part 2: Test conditions for moulding and extrusion plastics | |
| Plastics \x96 Determination of tensile properties \x96 Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites | |
| Plastics \x96 Determination of tensile properties \x96 Part 5: Test conditions for unidirectional fibre-reinforced plastic composites | |
| Plastics \x96 Ecotoxicity testing scheme for soluble decomposition intermediates from biodegradable plastic materials and products used in the marine environment \x96 Test methods and requirements | |
| Plastics \x96 Homopolymer and copolymer resins of vinyl chloride for general use \x96 Determination of plasticizer absorption at room temperature | |
| Plastics \x96 Industrial compostable plastic drinking straws | |
| Plastics \x96 Industrial compostable plastic shopping bags | |
| Plastics \x96 Measurement of resistivity of conductive plastics | |
| Plastics \x96 Methods of exposure to laboratory light sources \x96 Part 1: General guidance and requirements | |
| Plastics \x96 Methods of exposure to laboratory light sources \x96 Part 3: Fluorescent UV lamps | |
| Plastics \x96 Polyethylene (PE) \x96 Determination of co-monomer content by solution state 13C-NMR spectrometry | |
| Plastics \x96 Polypropylene and propylene-copolymers \x96 Determination of thermal oxidative stability in air \x96 Oven method | |
| Plastics collapsible containers for human blood and blood components \x96 Part 1: Conventional containers | |
| Plastics hoses and hose assemblies \x96 Textile-reinforced types for hydraulic applications \x96 Specification | |
| Plastics piping systems for non-pressure underground conveyance and storage of non-potable water \x96 Arch-shaped, corrugated wall chambers made of PE or PP used for retention, detention, storage and transportation of... | |
| Plastics piping systems for non-pressure underground conveyance and storage of non-potable water \x96 Boxes used for retention, detention, storage and transportation systems \x96 Specifications for storm water boxes made of... | |
| Plastics piping systems for water supply and for drainage and sewerage under pressure \x96 Polyethylene (PE) \x96 Part 1: General | |
| Plastics piping systems for water supply, and for drainage and sewerage under pressure \x96 Polyethylene (PE) \x96 Part 2: Pipes \x96 Amendment 1 | |
| Plastics piping systems for water supply, and for drainage and sewerage under pressure \x96 Polyethylene (PE) \x96 Part 2: Pipes | |
| Plastics piping systems for water supply, and for drainage and sewerage under pressure \x96 Polyethylene (PE) \x96 Part 3: Fittings | |
| Plastics piping systems for water supply, and for drainage and sewerage under pressure \x96 Polyethylene (PE) \x96 Part 5: Fitness for purpose of the system | |
| Polyphenylsulfone (PPSU) \x96 Effect of time and temperature on expected strength | |
| Polysulfone (PSU) \x96 Effect of time and temperature on expected strength | |
| Polyvinylidene fluoride (PVDF) \x96 Effect of time and temperature on expected strength | |
| Products in fibre-reinforced cement \x96 Long corrugated and asymmetrical section sheets and fittings for roofing and cladding | |
| Protective gloves against dangerous chemicals and micro-organisms \x96 Part 2: Determination of resistance to penetration | |
| Protective gloves against dangerous chemicals and micro-organisms \x96 Part 4: Determination of resistance to degradation by chemicals | |
| Pulps \x96 Laboratory wet disintegration \x96 Part 3: Disintegration of mechanical pulps at =85\xb0C | |
| Quality requirements for fusion welding of metallic materials \x96 Part 1: Criteria for the selection of the appropriate level of quality requirements | |
| Quality requirements for fusion welding of metallic materials \x96 Part 2: Comprehensive quality requirements | |
| Quality requirements for fusion welding of metallic materials \x96 Part 3: Standard quality requirements | |
| Quality requirements for fusion welding of metallic materials \x96 Part 4: Elementary quality requirements | |
| Quality requirements for fusion welding of metallic materials \x96 Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO... | |
| Quality requirements for fusion welding of metallic materials \x96 Part 6: Guidelines on implementing the ISO 3834 series | |
| Radiological protection \x96 X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy \x96 Part 1: Radiation characteristics... | |
| Radiological protection \x96 X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy \x96 Part 2: Dosimetry for... | |
| Radiological protection \x96 X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy \x96 Part 3: Calibration of... | |
| Radiological protection \x96 X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy \x96 Part 4: Calibration of... | |
| Railway applications \x96 Braking system \x96 Quality of compressed air for pneumatic apparatus and systems | |
| Reaction to fire tests \x96 Parallel panel test method for wall systems \x96 Measurement of heat release and smoke production | |
| Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation | |
| Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4: Operation, maintenance, repair and recovery | |
| Refrigerating systems and heat pumps \x96 Safety and environmental requirements \x96 Part 1: Definitions, classification and selection criteria | |
| Refrigerating systems and heat pumps \x96 Safety and environmental requirements \x96 Part 2: Design, construction, testing, marking and documentation \x96 AMENDMENT 1 | |
| Refrigerating systems and heat pumps \x96 Safety and environmental requirements \x96 Part 3: Installation site | |
| Resilient, textile and laminate floor coverings \x96 Castor chair test | |
| Road traffic safety (RTS) management systems - Requirements with guidance for use | |
| Road vehicles \x96 Multi-core connecting cables \x96 Part 1: Test methods and requirements for basic performance sheathed cables | |
| Road vehicles \x96 Multi-core connecting cables \x96 Part 2: Test methods and requirements for high performance sheathed cables | |
| Road vehicles \x96 Multi-core connecting cables \x96 Part 3: Construction, dimensions and marking of unscreened sheathed low-voltage cables | |
| Robotics \x96 Test methods for exoskeleton-type walking RACA robot | |
| Rolling bearings \x96 Ceramic rolling elements \x96 Terms and characteristics of surface imperfections | |
| Rolling bearings \x96 Radial bearings \x96 Geometrical product specifications (GPS) and tolerance values | |
| Rubber and plastics hoses and hose assemblies \x96 Methods of measurement of the dimensions of hoses and the lengths of hose assemblies | |
| Rubber and plastics hoses and tubing, and their assemblies \x96 Determination of permeability to gas | |
| Rubber hoses and hose assemblies for sand and grit blasting \x96 Specification | |
| Rubber hoses and hose assemblies for water suction and discharge \x96 Specification | |
| Rubber, vulcanized - Preparations of samples and test pieces - Part 2: Chemical tests | |
| Rubber, vulcanized or thermoplastic \x96 Determination of hardness (hardness between 10 IRHD and 100 IRHD) | |
| Rubber- or plastics-coated fabrics \x96 Determination of tear resistance \x96 Part 2: Ballistic pendulum method | |
| Safety devices for protection against excessive pressure \x96 Part 10: Sizing of safety valves and bursting discs for gas/liquid two-phase flow | |
| Safety devices for protection against excessive pressure \x96 Part 2: Bursting disc safety devices | |
| Safety devices for protection against excessive pressure \x96 Part 3: Safety valves and bursting disc safety devices in combination | |
| Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a... | |
| Sampling procedures for inspection by variables - Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics | |
| Sampling procedures for inspection by variables - Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection | |
| Sampling procedures for inspection by variables - Part 4: Procedures for assessment of declared quality levels | |
| Sampling procedures for inspection by variables - Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation) | |
| Sampling procedures for inspection by variables \x96 Part 6: Specification for single sampling plans for isolated lot inspection indexed by limiting quality (LQ) | |
| Screw threads - Vocabulary | |
| Sensory analysis - Guidelines for the use of quantitative response scales | |
| Sensory analysis \x96 Methodology \x96 Triangle test | |
| Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation) | |
| Series 1 freight containers \x96 Handling and securing \x96 Amendment 1: Twistlocks, latchlocks, stacking fittings and lashing rod systems for securing of containers | |
| Series 1 freight containers \x96 Handling and securing \x96 Amendment 2: Vertical tandem lifting | |
| Series 1 freight containers \x96 Handling and securing \x96 Amendment 3: Double stack rail car operation | |
| Series 1 freight containers \x96 Handling and securing \x96 Amendment 4: 45 ft containers | |
| Series 1 freight containers \x96 Handling and securing | |
| Shipbuilding - Ship screw propellers - Manufacturing tolerances - Part 1: Propellers of diameter greater than 2,50 m | |
| Shipbuilding - Ship screw propellers - Manufacturing tolerances - Part 2: Propellers of diameter between 0,80 and 2,50 m inclusive | |
| Shipbuilding \x96 Sea-going vessels \x96 Windlasses and anchor capstans | |
| Shipbuilding and marine structures - Deck machinery - Vocabulary and symbols | |
| Shipbuilding and marine structures - Mooring winches | |
| Ships and marine technology - Accommodation ladders | |
| Ships and marine technology - Clear openings for external single-leaf doors | |
| Ships and marine technology \x96 A-frame launch and recovery system | |
| Ships and marine technology \x96 Aquatic nuisance species \x96 Methods for evaluating the performance of compliance monitoring devices for ballast water discharges | |
| Ships and marine technology \x96 Combined rigging for deep-sea mooring | |
| Ships and marine technology \x96 Drain facilities from oil and water tanks | |
| Ships and marine technology \x96 Embarkation ladders | |
| Ships and marine technology \x96 Escorting and pull-back system for tankers | |
| Ships and marine technology \x96 Guardrails for cargo ships | |
| Ships and marine technology \x96 Hydraulic performance tests for waterjet propulsion system | |
| Ships and marine technology \x96 Interoperability of smart applications for ships | |
| Ships and marine technology \x96 Jacking system appliances on self-elevating unit \x96 General requirements | |
| Ships and marine technology \x96 Noise measurement method for HVAC system in accommodation spaces | |
| Ships and marine technology \x96 Piling barge winches | |
| Ships and marine technology \x96 Submersibles \x96 Vocabulary | |
| Ships and marine technology \x96 Test procedures and methods for windlasses and winches | |
| Ships and marine technology \x96 Virtual reality and simulation training systems for lifesaving appliances and arrangements | |
| Ships and marine technology \x96 Winches for trailing suction hopper dredger | |
| Sintered hardmetals \x96 Sampling and testing | |
| Small medical gas cylinders \x96 Pin-index yoke-type valve connections | |
| Smart community infrastructure \x96 Electric power infrastructure \x96 Measurement methods for the quality of thermal power infrastructure and requirements for plant operations and management | |
| Smart community infrastructure \x96 Responsiveness assessment and maturity model | |
| Smart community infrastructures -- Maturity model for assessment and improvement | |
| Smart community infrastructures \x96 Best practice guidelines for transportation | |
| Smart community infrastructures \x96 Data framework for infrastructure governance based on digital technology in smart cities | |
| Smart community infrastructures \x96 Disaster risk reduction \x96 Basic framework for implementation | |
| Smart community infrastructures \x96 Disaster risk reduction \x96 Guidance for implementing seismometer systems | |
| Smart community infrastructures \x96 Guidance on smart transportation by Electric, Connected and Autonomous Vehicles (eCAVs) and its application to on-demand responsive passenger services with shared vehicles | |
| Smart community infrastructures \x96 Guidance on smart transportation for energy saving in transportation services | |
| Smart community infrastructures \x96 Guidance on smart transportation with QR code identification and authentification in transportation and its related or additional services | |
| Smart community infrastructures \x96 Guidance on smart transportation with the use of digitally processed payment (d-payment) | |
| Smart community infrastructures \x96 Guidelines on data exchange and sharing for smart community infrastructures | |
| Smart community infrastructures \x96 Operation and maintenance of utility tunnels | |
| Smart community infrastructures \x96 Principles and requirements for performance metrics | |
| Smart community infrastructures \x96 Smart transportation by autonomous vehicles on public roads | |
| Smart community infrastructures \x96 Smart transportation by facial recognition payment (f-payment | |
| Smart community infrastructures \x96 Smart transportation by run-through train/bus operation in/between cities | |
| Smart community infrastructures \x96 Smart transportation for compact cities | |
| Smart community infrastructures \x96 Smart transportation for energy saving operation by intentionally driving slowly | |
| Smart community infrastructures \x96 Smart transportation for fuel efficiency and pollution emission reduction in bus transportation services | |
| Smart community infrastructures \x96 Smart transportation for newly developing areas | |
| Smart community infrastructures \x96 Smart transportation for parking lot allocation in cities | |
| Smart community infrastructures \x96 Smart transportation for rapid transit in and between large city zones and their surrounding areas | |
| Smart community infrastructures \x96 Smart transportation using battery-powered buses for passenger services | |
| Smart community infrastructures \x96 Smart transportation using fuel cell light rail transit (FC-LRT) | |
| Smart community infrastructures \x96 Urban data integration framework for smart city planning (SCP) | |
| Soil quality \x96 Determination of perchlorate in soil using liquid chromatography-tande m mass spectrometry (LC-MS/MS) | |
| Soil quality \x96 Guidance on soil temperature measurement | |
| Soil, treated biowaste, sludge and waste \x96 Digestion of aqua regia soluble fractions of elements | |
| Solid biofuels \x96 Determination of fines content in pellets | |
| Solid recovered fuels \x96 Determination of the recycling index for co-processing | |
| Solid recovered fuels \x96 Methods for the determination of the content of elements (Al, Ca, Fe, K, Mg, Na, P, S, Si, Ti, As, Ba, Be, Cd, Co, Cr, Cu,... | |
| Stationary source emissions \x96 Chemical absorption method for sampling and determining mercury species in flue gas | |
| Statistical interpretation of data - Tests for departure from the normal distribution | |
| Steel and cast iron \x96 Determination of copper content \x96 Flame atomic absorption spectrometric method | |
| Steel and cast iron \x96 Determination of total silicon content \x96 Reduced molybdosilicate spectrophotometric method \x96 Part 1: Silicon contents between 0,05 and 1,0% | |
| Steel and cast iron \x96 Determination of vanadium content \x96 Potentiometric titration method | |
| Steel and cast irons \x96 Determination of silicon content \x96 Gravimetric method | |
| Steel and iron - Determination of sulfur content - Infrared absorption method after combustion in an induction furnace | |
| Straight cylindrical involute splines \x96 Metric module, side fit \x96 Part 1: Generalities | |
| Straight cylindrical involute splines \x96 Metric module, side fit \x96 Part 2: Dimensions | |
| Straight cylindrical involute splines \x96 Metric module, side fit \x96 Part 3: Inspection | |
| Straight resistance spot welding electrodes | |
| Sustainable cities and communities \x96 Appraisal framework for datasets and data processing methods that create urban management information | |
| Sustainable cities and communities \x96 Business districts \x96 Guidance for practical local implementation of ISO 37101 | |
| Sustainable cities and communities \x96 Descriptive framework for cities and communities | |
| Sustainable cities and communities \x96 Environmental, social and governance (ESG) indicators for cities | |
| Sustainable cities and communities \x96 Guidance on establishing smart city operating models for sustainable communities | |
| Sustainable cities and communities \x96 Indicators for resilient cities | |
| Sustainable cities and communities \x96 Indicators for smart cities | |
| Sustainable cities and communities \x96 Management requirements and recommendations for open data for smart cities and communities \x96 Overview and general principles | |
| Sustainable cities and communities \x96 Recommendations and requirements for project developers \x96 Meeting ISO 37101 framework principles | |
| Sustainable cities and communities \x96 Transforming our cities \x96 Guidance for practical local implementation of ISO 37101 | |
| Sustainable cities and communities \x96 Urban settlements \x96 Guidance for a flexible approach to phased implementation of ISO 37101 | |
| Sustainable development in communities \x96 Management system for sustainable development \x96 Requirements with guidance for use | |
| Sustainable development of communities \x96 Indicators for city services and quality of life | |
| Sustainable mobility and transportation \x96 Framework for transportation services by providing meshes for 5G communication | |
| Technical drawings - Geometrical tolerancing - Datums and datum systems for geometrical tolerances | |
| Technical drawings - Installations - Part 1: Graphical symbols for plumbing, heating, ventilation and ducting | |
| Technical drawings - Simplified representation of bars and profile sections | |
| Technical guidelines for the evaluation of energy savings of thermal power plants | |
| Test method for flight stability of a multi-copter unmanned aircraft system (UAS) under wind and rain conditions | |
| Test methods for civil multi-copter unmanned aircraft system | |
| Textile fibres \x96 Determination of breaking force and elongation at break of individual fibres | |
| Textiles - Care labelling code using symbols | |
| Textiles \x96 Animal welfare in the supply chain \x96 General requirements for the production, preparation and traceability of Angora rabbit fibre, including ethical claims and supporting information | |
| Textiles \x96 Stitch types \x96 Classification and terminology | |
| Textiles \x96 Woven fabrics \x96 Determination of mass per unit length and mass per unit area | |
| Textiles and textile products \x96 Microplastics from textile sources \x96 Part 1: Determination of material loss from fabrics during washing | |
| Textiles and textile products \x96 Microplastics from textile sources \x96 Part 3: Measurement of collected material mass released from textile end products by domestic washing method | |
| Thermoplastics pipes \x96 Universal wall thickness table | |
| Tobacco \x96 Sampling of batches of raw material \x96 General principles | |
| Tobacco and tobacco products - Determination of organochlorine pesticide residues - Gas chromatographic method | |
| Tobacco and tobacco products \x96 Determination of filling power for preparation of fine-cut smoking articles \x96 Constant-weight pressurization | |
| Toleranced dimensions \x96 Conversion from inches into millimeters and vice versa | |
| Tourism and related services \x96 Dry stack boat storage \x96 Minimum requirements for operations and service provision | |
| Tractors for agriculture and forestry - Measurement of noise at the operator's position - Survey method | |
| Tractors, machinery for agriculture and forestry, powered lawn and garden equipment \x96 Symbols for operator controls and other displays \x96 Part 1: Common symbols \x96 AMENDMENT 1 | |
| Tractors, machinery for agriculture and forestry, powered lawn and garden equipment \x96 Symbols for operator controls and other displays \x96 Part 1: Common symbols | |
| Tractors, machinery for agriculture and forestry, powered lawn and garden equipment \x96 Symbols for operator controls and other displays \x96 Part 2: Symbols for agricultural tractors and machinery \x96 AMENDMENT... | |
| Tractors, machinery for agriculture and forestry, powered lawn and garden equipment \x96 Symbols for operator controls and other displays \x96 Part 2: Symbols for agricultural tractors and machinery | |
| Tractors, machinery for agriculture and forestry, powered lawn and garden equipment \x96 Symbols for operator controls and other displays \x96 Part 3: Symbols for powered lawn and garden equipment | |
| Tractors, machinery for agriculture and forestry, powered lawn and garden equipment \x96 Symbols for operator controls and other displays \x96 Part 4: Symbols for forestry machinery | |
| Tractors, machinery for agriculture and forestry, powered lawn and garden equipment \x96 Symbols for operator controls and other displays \x96 Part 5: Symbols for manual portable forestry machines | |
| Traditional Chinese medicine \x96 Safety controls for cupping devices | |
| Translation services \x96 Evaluation of translation output \x96 General guidance | |
| Unmanned aircraft systems \x96 Part 2: Operation of vertiports for vertical take-off and landing (VTOL) unmanned aircraft (UA) | |
| Unplasticized polyvinyl chloride (PVC) and metal adaptor fittings for pipes under pressure - Laying lengths and size of threads - Metric series | |
| Vitreous and porcelain enamel finishes \x96 Selection of test methods for vitreous and porcelain enamelled areas of articles | |
| Vitreous and porcelain enamelled manufactured articles \x96 Determination of resistance to heat | |
| Volatile organic liquids \x96 Determination of boiling range of organic solvents used as raw materials | |
| Water efficiency management systems \x96 Requirements with guidance for use | |
| Water meters for cold potable water and hot water \x96 Part 1: Metrological and technical requirements | |
| Water meters for cold potable water and hot water \x96 Part 2: Test methods | |
| Water meters for cold potable water and hot water \x96 Part 3: Test report format | |
| Water meters for cold potable water and hot water \x96 Part 4: Non-metrological requirements not covered in ISO 4064-1 | |
| Water meters for cold potable water and hot water \x96 Part 5: Installation requirements | |
| Water quality \x96 Aquatic toxicity test based on root re-growth in Lemna minor | |
| Welding consumables \x96 Covered electrodes for manual metal arc welding of stainless and heat-resisting steels \x96 Classification | |
| Welding consumables \x96 Technical delivery conditions for filler materials and fluxes \x96 Type of product, dimensions, tolerances and markings | |
| Welding, brazing, soldering and braze welding of metals - Nomenclature of processes and reference numbers for symbolic representation on drawings | |
| Whistleblowing management systems \x96 Guidelines | |
| Wrought steels - Macroscopic methods for assessing the content of non-metallic inclusions |
| << Prev | Next >> |