Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
400
450
500
550
600
650
680
690
700
710
720
730
733
734
735
736
737
738
739
740
741
742
743
744
745
750
760
770
780
790
800
850
900
950
1000
1050
1100
1500
1620
| Product Name | Notes |
|---|---|
| Absorbent incontinence products for urine and/or faeces \x96 Product type names and illustrations | |
| Acoustics \x96 Experimental method for transposition of dynamic forces generated by an active component from a test bench to a receiving structure | |
| Acoustics \x96 Normal equal-loudness-level contours | |
| Adhesives \x96 Adhesives for floor coverings \x96 Requirements for mechanical and electrical performance | |
| Adhesives \x96 Test methods for adhesives for floor and wall coverings \x96 Peel test | |
| Adhesives \x96 Test methods for adhesives for floor and wall coverings \x96 Shear test | |
| Adhesives \x96 Test methods for adhesives for floor coverings and wall coverings \x96 Determination of dimensional changes of a linoleum floor covering in contact with an adhesive (ISO 22633:2019) | |
| Agricultural vehicles \x96 Standardized access to repair and maintenance information (RMI) \x96 Part 1: User interface requirements for web-based information systems | |
| Agricultural vehicles \x96 Standardized access to repair and maintenance information (RMI) \x96 Part 2: Vehicle on-board diagnostics | |
| Air cargo \x96 Cargo stopper devices \x96 Design and testing | |
| Air cargo unit load devices \x96 Load distribution model | |
| Anaesthetic and respiratory equipment \x96 Voice prostheses | |
| Assessment of the effectiveness of cathodic protection based on coupon measurements | |
| Assistive products \x96 General requirements and test methods | |
| Assistive products \x96 Guidelines on cognitive accessibility \x96 Daily time management | |
| Automation systems and integration \x96 Assessment on convergence of informatization and industrialization for industrial enterprises \x96 Part 1: Framework and reference model | |
| Automation systems and integration \x96 Assessment on convergence of informatization and industrialization for industrial enterprises \x96 Part 2: Maturity model and evaluation methodology | |
| Bamboo structures \x96 Bamboo culms \x96 Structural design | |
| Bamboo structures \x96 Determination of physical and mechanical properties of bamboo culms \x96 Test methods | |
| Bases for design of structures \x96 General requirements | |
| Biotechnology \x96 Biobanking \x96 General requirements for the validation and verification of processing methods for biological material in biobanks | |
| Biotechnology \x96 Biobanking \x96 Process and quality requirements for establishment, maintenance and characterization of mammalian cell lines \x96 Amendment 1 | |
| Biotechnology \x96 Biobanking \x96 Process and quality requirements for establishment, maintenance and characterization of mammalian cell lines | |
| Biotechnology \x96 General requirements for transportation of cells for therapeutic use | |
| Biotechnology \x96 Specification on data management and publication in microbial resource centers | |
| Blast chiller and freezer cabinets for professional use \x96 Classification, requirements and test conditions | |
| Blockchain and distributed ledger technologies \x96 Vocabulary | |
| Brazing \x96 Quality requirements for brazing of metallic materials | |
| Building construction \x96 Accessibility and usability of the built environment | |
| Cardiovascular implants \x96 Transcatheter cardiac occluders | |
| Categorization and classification of civil unmanned aircraft systems | |
| Cereals, pulses and by-products \x96 Determination of ash yield by incineration | |
| Cigarettes \x96 Determination of benzo[a]pyrene in cigarette mainstream smoke \x96 Method using gas chromatography/mass spectrometry | |
| Cigarettes \x96 Determination of benzo[a]pyrene in cigarette mainstream smoke using GC/MS \x96 Part 1: Method using methanol as extraction solvent | |
| Cigarettes \x96 Determination of benzo[a]pyrene in cigarette mainstream smoke using GC/MS \x96 Part 2: Method using cyclohexane as extraction solvent | |
| Cigarettes \x96 Determination of nicotine in total particulate matter from the mainstream smoke with an intense smoking regime \x96 Gas-chromatographic method | |
| Clinical dosimetry - Beta radiation sources for brachytherapy | |
| Clothing for protection against infectious agents - Medical face masks - Test method for resistance against penetration by synthetic blood (fixed volume, horizontally projected) | |
| Cognitive accessibility \x96 Part 1: General guidelines | |
| Cognitive accessibility \x96 Part 2: Reporting | |
| Commercial beverage coolers \x96 Classification, requirements and test conditions | |
| Condition monitoring and diagnostics of machines - Acoustic emission | |
| Conference systems \x96 Equipment \x96 Requirements | |
| Construction procurement \x96 Guidance on strategy and tactics | |
| Consumer vulnerability \x96 Requirements and guidelines for the design and delivery of inclusive service | |
| Corrosion of metals and alloys \x96 Electrochemical measurement of ion transfer resistance to characterize the protective rust layer on weathering steel | |
| Corrosion of metals and alloys \x96 Electrochemical measurements \x96 Test method for monitoring atmospheric corrosion | |
| Corrosion of metals and alloys \x96 Measurement of the electrochemical critical localized corrosion temperature (E-CLCT) for Ti alloys fabricated via the additive manufacturing method | |
| Corrosion of metals and alloys \x96 Sulfur dioxide test in a humid atmosphere (fixed gas method) | |
| Corrosion of metals and alloys \x96 Test method for measuring the stress corrosion crack growth rate of steels and alloys under static-load conditions in high-temperature water | |
| Crop protection equipment - Drift classification of spraying equipment - Part 1: Classes | |
| Crop protection equipment - Drift classification of spraying equipment - Part 2: Classification of field crop sprayers by field measurements | |
| Crop protection equipment - Field measurement of spray distribution in tree and bush crops | |
| Crop protection equipment - Test methods for the evaluation of cleaning systems - Part 1: Internal cleaning of complete sprayers | |
| Crop protection equipment - Test methods for the evaluation of cleaning systems - Part 2: External cleaning of sprayers | |
| Crop protection equipment - Test methods for the evaluation of cleaning systems - Part 3: Internal cleaning of tank | |
| Cylindrical involute gears and gear pairs \x96 Part 1: Concepts and geometry | |
| Dentistry - Materials for dental instruments - Part 1: Stainless steel | |
| Dentistry \x96 Central compressed air source equipment | |
| Dentistry \x96 Colour tabs for intraoral tooth colour determination | |
| Dentistry \x96 Elastomeric auxiliaries for use in orthodontics | |
| Dentistry \x96 Hydrocolloid impression materials | |
| Dentistry \x96 Materials for dental instruments \x96 Part 2: Polymers | |
| Dentistry \x96 Metallic materials for fixed and removable restorations and appliances | |
| Dentistry \x96 Multifunction handpieces | |
| Dentistry \x96 Rotational adaptability test between implant body and implant abutment in dental implant systems | |
| Dentistry \x96 Spoons and bone curettes | |
| Determination of particle size distribution \x96 Single particle light interaction methods \x96 Part 2: Light scattering liquid-borne particle counter | |
| Determination of particle size distribution \x96 Single particle light interaction methods \x96 Part 3: Light extinction liquid-borne particle counter | |
| Determination of particle size distribution \x96 Single particle light interaction methods \x96 Part 4: Light scattering airborne particle counter for clean spaces \x96 Amendment 1 | |
| Determination of particle size distribution \x96 Single particle light interaction methods \x96 Part 4: Light scattering airborne particle counter for clean spaces | |
| Determination of the residual stress of TGO layer in thermal barrier coating by photoexcitation fluorescence piezoelectric spectroscopy | |
| Determination of the resistance to hydrocarbon pool fires of fire protection materials and systems for pressure vessels | |
| Determination of the resistance to jet fires of passive fire protection materials \x96 Part 1: General requirements | |
| Diagnosing moisture damage in buildings and implementing countermeasures \x96 Part 1: Principles, nomenclature and moisture transport mechanisms | |
| Digital photography \x96 Gain map metadata for image conversion \x96 Part 1: Dynamic range conversion | |
| Displacement and dynamic compressors \x96 Performance test code for electric driven low-pressure air compressor packages | |
| Document management \x96 AFP interchange for PDF | |
| Document management \x96 ECMAScript for PDF \x96 Part 1: Use of ISO 32000-2 (PDF 2.0) | |
| Documentation. Numbering of divisions and subdivisions in written documents | |
| Doors, windows and curtain walling \x96 Curtain walling \x96 Vocabulary | |
| Dosimetry with radiophotoluminescen t glass dosimeters for dosimetry audit in MV X-ray radiotherapy | |
| Electric actuators for industrial valves \x96 General requirements (ISO 22153:2020) | |
| Electrically propelled road vehicles \x96 Electrical specifications and tests for voltage class B systems and components \x96 Part 1: Voltage sub-classes and characteristics | |
| Electrically propelled road vehicles \x96 Electrical specifications and tests for voltage class B systems and components \x96 Part 2: Electrical tests for components | |
| Electrically propelled road vehicles \x96 Test specification for electric propulsion components \x96 Part 1: General test conditions and definitions | |
| Electrically propelled road vehicles \x96 Test specification for electric propulsion components \x96 Part 2: Performance testing of the motor system | |
| Electrically propelled road vehicles \x96 Test specification for electric propulsion components \x96 Part 3: Performance testing of the motor and the inverter | |
| Electrically propelled road vehicles \x96 Test specification for electric propulsion components \x96 Part 4: Performance testing of the DC/DC converter | |
| Electrically propelled road vehicles \x96 Test specification for electric propulsion components \x96 Part 6: Operating load testing of motor and inverter | |
| Electronic record books for ships \x96 Technical specifications and operational requirements | |
| Environmental solid matrices \x96 Determination of elements using inductively coupled plasma optical emission spectrometry (ICP-OES) | |
| Equipment for crop protection - Method for measurement of potential spray drift from horizontal boom sprayers by the use of a test bench | |
| Equipment for crop protection - Methods for field measurement of spray drift | |
| Equipment for crop protection - Methods for the laboratory measurement of spray drift - Wind tunnels | |
| Equipment for crop protection - Sprayers - Demonstration track for field crop sprayers | |
| Exchange of information on rare earth elements in industrial wastes and end-of-life cycled products | |
| Fans \x96 Laboratory test methods for air circulating fans | |
| Financial services - Privacy impact assessment | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Determination of densification properties of ceramic powders on natural sintering | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure \x96 Determination of hoop tensile properties of tubes | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Methods for chemical analysis of aluminium nitride powders | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Methods for chemical analysis of high purity barium titanate powders | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Reinforcement of ceramic composites \x96 Determination of distribution of tensile strength and tensile strain to failure of filaments within a multifilament tow... | |
| Fire resistance tests \x96 Elements of building construction \x96 Requirements for active fire curtains | |
| Fire resistance tests \x96 Fire dampers for air distribution systems \x96 Part 2: Intumescent dampers | |
| Fireworks \x96 Test methods for determination of specific chemical substances \x96 Part 10: Nitrogen content in nitrocellulose by iron(II) sulfate titration | |
| Fireworks \x96 Test methods for determination of specific chemical substances \x96 Part 11: Phosphorus content by inductively coupled plasma optical emission spectrometry (ICP-OES) | |
| Fireworks \x96 Test methods for determination of specific chemical substances \x96 Part 16: Procedure for identification of report or burst charge | |
| Fireworks \x96 Test methods for determination of specific chemical substances \x96 Part 3: Lead and lead compounds by atomic absorption | |
| Fireworks \x96 Test methods for determination of specific chemical substances \x96 Part 4: Analysis of lead and lead compounds by X-ray fluorescence spectrometry (XRF) | |
| Fireworks \x96 Test methods for determination of specific chemical substances \x96 Part 5: Analysis of lead and lead compounds by inductively coupled plasma spectrometry (ICP) | |
| Fireworks \x96 Test methods for determination of specific chemical substances \x96 Part 6: Zirconium with a particle size of less than 40 \xb5m by inductively coupled plasma optical emission spectrometry... | |
| Fireworks \x96 Test methods for determination of specific chemical substances \x96 Part 7: Chlorates content by chemical titration analysis | |
| Fireworks \x96 Test methods for determination of specific chemical substances \x96 Part 8: Arsenic content by hydride generation atomic fluorescence spectrometry | |
| Fireworks \x96 Test methods for determination of specific chemical substances \x96 Part 9: Mercury content by hydride generation atomic fluorescence spectrometry | |
| Flares for combustion of biogas | |
| Food safety \x96 Part 1: Requirements for bodies providing audit and certification of food safety management systems | |
| Food safety \x96 Part 2: Requirements for bodies providing evaluation and certification of products, processes and services, including an audit of the food safety system | |
| Foodstuffs \x96 Molecular biomarker analysis \x96 Protein-based methods | |
| Foot and leg protectors \x96 Requirements and test methods for footwear component assessment \x96 Part 2: Non-metallic toecaps | |
| Foot and leg protectors \x96 Requirements and test methods for footwear components assessment \x96 Part 1: Metallic toecaps | |
| Foot and leg protectors \x96 Requirements and test methods for footwear components assessment \x96 Part 3: Metallic anti-perforation insert | |
| Foot and leg protectors \x96 Requirements and test methods for footwear components assessment \x96 Part 4: Non-metallic perforation resistant insert | |
| Forestry and gardening machinery \x96 Noise test code for portable hand-held machines with internal combustion engine \x96 Engineering method (Grade 2 accuracy) | |
| Forestry and gardening machinery \x96 Vibration test code for portable hand-held machines with internal combustion engine \x96 Vibration at the handles | |
| Gas cylinders \x96 Cylinder valves with integrated pressure regulators \x96 Specification and type testing | |
| Gas cylinders \x96 Inspection and maintenance of valves | |
| Gas turbine applications \x96 Safety | |
| Gas welding equipment \x96 Part 1: Line pressure regulators and line pressure regulators with flow-metering devices for gas distribution pipelines up to 6 MPa (60 bar) | |
| Geometrical product specifications (GPS) \x96 Geometrical tolerancing \x96 General geometrical specifications and general size specifications | |
| Geometrical product specifications (GPS) \x96 Surface texture: Profile \x96 Part 1: Indication of surface texture | |
| Geometrical product specifications (GPS) \x96 Surface texture: Profile \x96 Part 2: Terms, definitions and surface texture parameters | |
| Geometrical product specifications (GPS) \x96 Surface texture: Profile \x96 Part 3: Specification operators | |
| Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 1: Technical principles for the sampling of soil, rock and groundwater | |
| Geotechnical investigation and testing \x96 Field testing \x96 Part 14: Borehole dynamic probing | |
| Geotechnical investigation and testing \x96 Field testing \x96 Part 16: Borehole shear test | |
| Geotechnical investigation and testing \x96 Field testing \x96 Part 1: Electrical cone and piezocone penetration test | |
| Geotechnical investigation and testing \x96 Field testing \x96 Part 4: Prebored pressuremeter test by M\xe9nard procedure | |
| Geotechnical investigation and testing \x96 Field testing \x96 Part 5: Prebored pressuremeter test | |
| Geotechnical investigation and testing \x96 Field testing \x96 Part 9: Field vane test (FVT and FVT-F) | |
| Geotechnical investigation and testing \x96 Geohydraulic testing \x96 Part 4: Pumping tests | |
| Glass in building \x96 Glass blocks \x96 Specification and test methods | |
| Glass in building \x96 Glazing and airborne sound insulation \x96 Product descriptions, determination of properties and extension rules | |
| Glass in building \x96 Heat strengthened soda lime silicate glass | |
| Graphical symbols \x96 Safety colours and safety signs \x96 Natural disaster safety way guidance system | |
| Graphical symbols \x96 Safety colours and safety signs \x96 Part 2: Measurement of photopic luminance of phosphorescent components used in a natural disaster safety way guidance system | |
| Guidance and recommendations on design, selection and installation of vents to safeguard the structural integrity of enclosures protected by gaseous fire-extinguishing systems | |
| Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation | |
| Guidance on project management | |
| Health and safety in welding and allied processes \x96 Equipment for capture and separation of welding fume \x96 Part 1: General requirements | |
| Health and safety in welding and allied processes \x96 Equipment for capture and separation of welding fume \x96 Part 2: Requirements for testing and marking of separation efficiency | |
| Health and safety in welding and allied processes \x96 Requirements, testing and marking of equipment for air filtration \x96 Part 3: Determination of the capture efficiency of on-torch welding fume... | |
| Health informatics - Guidelines on data protection to facilitate trans-border flows of personal health data | |
| Health informatics - Health indicators conceptual framework | |
| Health informatics \x96 Medical waveform format \x96 Part 1: Encoding rules | |
| Health informatics \x96 Medical waveform format \x96 Part 2: Electrocardiography | |
| Health informatics \x96 Medical waveform format \x96 Part 3: Long-term electrocardiography | |
| Health informatics \x96 Patient healthcard data \x96 Part 5: Identification data | |
| Health informatics \x96 Patient healthcard data \x96 Part 7: Medication data | |
| Health Informatics \x96 Reference standards portfolio (RSP) \x96 Clinical imaging | |
| Health informatics \x96 Terminology resource map quality measures and requirements (MapQual) | |
| Health informatics \x96 Workforce roles and capabilities for terminology and terminology services in healthcare (term workforce) | |
| Hydrogen generators using water electrolysis \x96 Industrial, commercial, and residential applications | |
| Hydrogen generators using water electrolysis process \x96 Part 1: Industrial and commercial applications | |
| Hydrogen generators using water electrolysis process \x96 Part 2: Residential applications | |
| Ice-cream freezers \x96 Classification, requirements and test conditions | |
| Implants for surgery \x96 Wear of total ankle-joint prostheses \x96 Loading and displacement parameters for wear-testing machines with load or displacement control and corresponding environmental conditions for test | |
| In vitro diagnostic medical devices \x96 Multiplex molecular testing for nucleic acids \x96 Part 1: Terminology and general requirements for nucleic acid quality evaluation | |
| In vitro diagnostic medical devices \x96 Multiplex molecular testing for nucleic acids \x96 Part 2: Validation and verification | |
| In vitro diagnostic medical devices \x96 Multiplex molecular testing for nucleic acids \x96 Part 3: Interpretation and reports | |
| Industrial trucks \x96 Verification of stability \x96 Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices | |
| Industrial trucks \x96 Verification of stability \x96 Part 15: Counterbalanced trucks with articulated steering | |
| Industrial trucks \x96 Verification of stability \x96 Part 16: Pedestrian-propelled trucks | |
| Industrial trucks \x96 Verification of stability \x96 Part 1: General | |
| Industrial valves \x96 Gearbox for valves | |
| Infant formula and adult nutritionals -Determination of trans and total (cis + trans) vitamin K1 content \x96 Normal phase HPLC | |
| Infant formula and adult nutritionals \x96 Determination of free and total choline and free and total carnitine \x96 Liquid chromatography tandem mass spectrometry (HPLC-MS/MS) | |
| Infant formula and adult nutritionals \x96 Determination of fructans \x96 High performance anion exchange chromatography with pulsed amperometric detection (HPAEC-PAD) after enzymatic treatment | |
| Infant formula and adult nutritionals \x96 Simultaneous determination of total vitamins B1, B2, B3 and B6 \x96 Enzymatic digestion and LC-MS/MS | |
| Information and documentation - Registry services for libraries and related organizations | |
| Information container for linked document delivery \x96 Exchange specification \x96 Part 1: Container | |
| Information container for linked document delivery \x96 Exchange specification \x96 Part 2: Link types | |
| Intelligent transport systems \x96 Fast service announcement protocol (FSAP) | |
| Interpreting services \x96 Healthcare interpreting \x96 Requirements and recommendations | |
| Kite boarding \x96 Release system \x96 Safety requirements and test methods | |
| Language coding \x96 A framework for language varieties \x96 Part 1: Vocabulary | |
| Language coding \x96 A framework for language varieties \x96 Part 3: Application of the framework | |
| Lasers and laser-related equipment \x96 Test methods for laser-induced damage threshold \x96 Classification of medical beam delivery systems | |
| Leather \x96 Chemical tests \x96 Determination of pesticide residues content | |
| Leather \x96 Measuring the colour and colour difference of finished leather | |
| Library objects for architecture, engineering, construction and use | |
| Liquid petroleum products \x96 Determination of hydrocarbon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel \x96 Multidimensional gas chromatography method | |
| Marine environment sensor performance \x96 Specifications, testing and reporting \x96 General requirements | |
| Marine structures \x96 Mobile offshore units \x96 Chain wheels | |
| Mechanical vibration - Rotor balancing - Part 12: Procedures and tolerances for rotors with flexible behaviour | |
| Mechanical vibration - Rotor balancing - Part 14: Procedures for assessing balance errors | |
| Mechanical vibration - Rotor balancing - Part 31: Susceptibility and sensitivity of machines to unbalance | |
| Mechanical vibration \x96 Rotor balancing \x96 Part 11: Procedures and tolerances for rotors with rigid behaviour \x96 Amendment 1 | |
| Mechanical vibration \x96 Rotor balancing \x96 Part 11: Procedures and tolerances for rotors with rigid behaviour | |
| Mechanical vibration \x96 Rotor balancing \x96 Part 14: Procedures for assessing balance errors \x96 Amendment 1 | |
| Mechanical vibration \x96 Rotor balancing \x96 Part 1: Introduction | |
| Mechanical vibration \x96 Rotor balancing \x96 Part 2: Vocabulary | |
| Medical devices utilizing animal tissues and their derivatives \x96 Part 1: Application of risk management | |
| Medical devices utilizing animal tissues and their derivatives \x96 Part 2: Controls on sourcing, collection and handling | |
| Medical laboratories \x96 Application of risk management to medical laboratories | |
| Metallic and other inorganic coatings \x96 Measurement of the linear thermal expansion coefficient of thermal barrier coatings | |
| Microbiology of food and animal feeding stuffs - Determination of water activity | |
| Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of yeasts and moulds - Part 1: Colony count technique in products with water activity greater than... | |
| Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of yeasts and moulds - Part 2: Colony count technique in products with water activity less than... | |
| Microbiology of food and animal feeding stuffs \x96 Horizontal methods for the detection and enumeration of Enterobacteriaceae \x96 Part 1: Detection and enumeration by MPN technique with pre-enrichment | |
| Microbiology of food and animal feeding stuffs \x96 Horizontal methods for the detection and enumeration of Enterobacteriaceae \x96 Part 2: Colony-count method | |
| Microbiology of the food chain \x96 Polymerase chain reaction (PCR) for the detection and quantification of microorganisms \x96 General requirements and definitions | |
| Microbiology of the food chain \x96 Specific requirements and guidance for proficiency testing by interlaboratory comparison | |
| Milk and milk products - Determination of lactose content by high-performance liquid chromatography (Reference method) | |
| Milk, milk products, infant formula and adult nutritionals \x96 Determination of minerals and trace elements \x96 Inductively coupled plasma mass spectrometry (ICP-MS) method | |
| Mobile elevating work platforms \x96 Operator's controls \x96 Actuation, displacement, location and method of operation | |
| Molecular biomarker analysis \x96 Method for the statistical evaluation of analytical results obtained in testing sub-sampled groups of genetically modified seeds and grains \x96 General requirements | |
| Motorcycles \x96 Measurement method for evaporative emissions \x96 Part 1: SHED test procedure | |
| Motorcycles \x96 Measurement method for evaporative emissions \x96 Part 2: Permeation test procedure | |
| Needle-free injection systems for medical use \x96 Requirements and test methods | |
| Non-active surgical implants \x96 Joint replacement implants \x96 Specific requirements for hip-joint replacement implants | |
| Non-active surgical implants \x96 Joint replacement implants \x96 Specific requirements for knee-joint replacement implants | |
| Non-destructive testing \x96 Characterization and verification of ultrasonic test equipment \x96 Part 1: Instruments | |
| Non-destructive testing \x96 Characterization and verification of ultrasonic test equipment \x96 Part 2: Probes | |
| Non-destructive testing \x96 Characterization and verification of ultrasonic test equipment \x96 Part 3: Combined equipment | |
| Non-destructive testing \x96 Standard test method for determining residual stresses by neutron diffraction | |
| Non-magnetic metallic coatings on metallic and non-metallic basis materials \x96 Measurement of coating thickness \x96 Phase-sensitive eddy-current method | |
| Nuclear Energy \x96 Fuel technology \x96 Determination of the O/M ratio in MOX pellets by the gravimetric method | |
| Nuclear fuel technology \x96 Sintered (U,Pu)O2 pellets \x96 Guidance for ceramographic preparation for microstructure examination | |
| Oil and gas industries including lower carbon energy \x96 Pipeline transportation systems \x96 Onshore and offshore pipelines pig traps design requirements | |
| Open data communication in building automation, controls and building management \x96 Home and building electronic systems \x96 KNXnet/IP communication | |
| Packaging - Complete, filled transport packages - Identification of parts when testing | |
| Packaging - Complete, filled transport packages - Vertical impact test by dropping | |
| Packaging - Linear bar code and two-dimensional symbols for product packaging | |
| Packaging \x96 Flexible intermediate bulk containers (FIBCs) for non-dangerous goods | |
| Packaging \x96 Tamper verification features for medicinal product packaging | |
| Paints and varnishes - Electro-deposition coatings - Part 12: Sedimentation on horizontal areas | |
| Paints and varnishes \x96 Determination of settling | |
| Paints and varnishes \x96 Determination of solvents in water-thinnable coating materials \x96 Gas-chromatographic method | |
| Paints and varnishes \x96 Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 10: Edge protection | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 11: Bath stability | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 13: Determination of re-solving behaviour | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 14: Deposition behaviour | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 15: Permeate residues | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 16: Pigment-binder ratio | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 1: Vocabulary | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 2: Throwing power | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 3: Compatibility of electro-deposition coating materials with a reference oil | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 4: Compatibility of electro-deposition coating materials with liquid, paste-like and solid foreign materials | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 5: Determination of sieve residue | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 6: Entry marks | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 7: Electrical wet-film resistance | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 8: Electric charge density | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 9: Stoving loss | |
| Paints and varnishes \x96 Practical determination of non-volatile and volatile matter content during application | |
| Paints and varnishes \x96 Scratch test using a spring-loaded pen | |
| Passive neutron dosimetry systems \x96 Part 1: Performance and test requirements for personal dosimetry | |
| Passive neutron dosimetry systems \x96 Part 2: Methodology and criteria for the qualification of personal dosimetry systems in workplaces | |
| Permissible mechanical connection combinations between towed and towing agricultural vehicles | |
| Personal financial planning - Requirements for personal financial planners | |
| Petroleum and natural gas industries \x96 External coatings for buried or submerged pipelines used in pipeline transportation systems \x96 Part 11: Coatings for in-field application, coating repairs and rehabilitation | |
| Petroleum products \x96 Determination of turbidity point and aniline point equivalent | |
| Petroleum products and lubricants \x96 Determination of oil separation from grease \x96 Pressure filtration method | |
| Petroleum products and lubricants \x96 Determination of the dropping point of grease with an automatic apparatus | |
| Petroleum, petrochemical and natural gas industries \x96 Prevention of corrosion on pipeline systems influenced by stray currents | |
| Photography and graphic technology - Extended colour encodings for digital image storage, manipulation and interchange - Part 1: Architecture and requirements | |
| Photography and graphic technology - Extended colour encodings for digital image storage, manipulation and interchange - Part 2: Reference output medium metric RGB colour image encoding (ROMM RGB) | |
| Photography and graphic technology \x96 Extended colour encodings for digital image storage, manipulation and interchange \x96 Part 3: Reference input medium metric RGB colour image encoding (RIMM RGB) | |
| Photography and graphic technology \x96 Extended colour encodings for digital image storage, manipulation and interchange \x96 Part 4: European Colour Initiative RGB colour image encoding [eciRGB (2008)] | |
| Pigments and extenders \x96 Determination of experimentally simulated nano-object release from paints, varnishes and pigmented plastics | |
| Plastics \x96 Assessment of the intrinsic biodegradability of materials exposed to marine inocula under mesophilic aerobic laboratory conditions \x96 Test methods and requirements | |
| Plastics \x96 Carbon and environmental footprint of biobased plastics \x96 Part 1: General principles | |
| Plastics \x96 Carbon and environmental footprint of biobased plastics \x96 Part 2: Material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule | |
| Plastics \x96 Carbon and environmental footprint of biobased plastics \x96 Part 3: Process carbon footprint, requirements and guidelines for quantification | |
| Plastics \x96 Carbon and environmental footprint of biobased plastics \x96 Part 4: Environmental (total) footprint (Life cycle assessment) | |
| Plastics \x96 Determination of the aerobic biodegradation of non-floating materials exposed to marine sediment \x96 Method by analysis of evolved carbon dioxide | |
| Plastics \x96 Determination of the degree of disintegration of plastic materials in marine habitats under real field conditions | |
| Plastics \x96 Determination of thermal conductivity and thermal diffusivity \x96 Part 1: General principles | |
| Plastics \x96 Determination of thermal conductivity and thermal diffusivity \x96 Part 2: Transient plane heat source (hot disc) method | |
| Plastics \x96 Determination of thermal conductivity and thermal diffusivity \x96 Part 4: Light flash method | |
| Plastics \x96 Polyketone (PK) moulding and extrusion materials \x96 Part 1: Designation system and basis for specifications | |
| Plastics \x96 Polyketone (PK) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties | |
| Plastics pipes and fittings - Decohesion test of electrofusion assemblies - Strip-bend test | |
| Project, programme and portfolio management \x96 Guidance on governance | |
| Project, programme and portfolio management \x96 Guidance on portfolio management | |
| Project, programme and portfolio management \x96 Guidance on programme management | |
| Project, programme and portfolio management \x96 Guidance on project management | |
| Prosthetics \x96 Testing of ankle-foot devices and foot units \x96 Requirements and test methods | |
| Protective clothing \x96 Protection against liquid chemicals \x96 Measurement of repellency, retention, and penetration of liquid pesticide formulations through protective clothing materials | |
| Protective gloves \x96 General requirements and test methods \x96 Amendment 1 | |
| Quality management systems - Guidelines for the application of ISO 9001:2008 to crop production | |
| Railway applications \x96 Bodyside windows for rolling stock | |
| Railway applications \x96 Concepts and basic requirements for the planning of railway operation in the event of earthquakes | |
| Railway applications \x96 Concrete sleepers and bearers for track \x96 Part 1: General requirements | |
| Railway applications \x96 Concrete sleepers and bearers for track \x96 Part 2: Prestressed monoblock sleepers | |
| Railway applications \x96 Railway quality management system \x96 ISO 9001:2015 and specific requirements for application in the railway sector | |
| Railway applications \x96 Suspension components \x96 Part 1: Characteristics and test methods for elastomer-mechanical parts | |
| Railway applications \x96 Suspension components \x96 Part 2: Approval procedure and quality monitoring for elastomer-mechanical parts | |
| Railway infrastructure \x96 Rail fastening systems \x96 Part 1: Vocabulary | |
| Railway infrastructure \x96 Rail fastening systems \x96 Part 2: Test method for longitudinal rail restraint | |
| Railway infrastructure \x96 Rail fastening systems \x96 Part 3: Proof load test method for pull-out resistance | |
| Railway infrastructure \x96 Rail fastening systems \x96 Part 4: Test methods for resistance to repeated loading | |
| Railway infrastructure \x96 Rail fastening systems \x96 Part 5: Test method for electrical resistance | |
| Railway infrastructure \x96 Rail fastening systems \x96 Part 6: Test method for resistance to severe environmental conditions | |
| Railway infrastructure \x96 Rail fastening systems \x96 Part 7: Test method for clamping force and uplift stiffness | |
| Railway infrastructure \x96 Rail fastening systems \x96 Part 8: Test method for vertical stiffness | |
| Rare earth \x96 Vocabulary \x96 Part 1: Minerals, oxides and other compounds | |
| Rare earth \x96 Vocabulary \x96 Part 2: Metals and their alloys | |
| Recycling of rare earth elements \x96 Requirements for providing information on industrial waste and end-of-life products | |
| Reference data for financial services \x96 Specification for the description of banking products or services (BPoS) | |
| Refrigerated hydrocarbon fluids \x96 Dynamic measurement \x96 Requirements and guidelines for the calibration and installation of flowmeters used for liquefied natural gas (LNG) and other refrigerated hydrocarbon fluids | |
| Refrigerated storage cabinets and counters for professional use \x96 Performance and energy consumption | |
| Refrigerating systems and heat pumps \x96 Competence of personnel | |
| Refrigerating systems and heat pumps \x96 Valves \x96 Requirements, testing and marking | |
| Road vehicles - Open diagnostic data exchange (ODX) - Part 2: Emissions-related diagnostic data | |
| Road vehicles - Recyclability and recoverability - Calculation method | |
| Road vehicles \x96 Durability test method of starter relay for stop and start system | |
| Road vehicles \x96 Media Oriented Systems Transport (MOST) \x96 Part 10: 150-Mbit/s coaxial physical layer | |
| Road vehicles \x96 Media Oriented Systems Transport (MOST) \x96 Part 11: 150-Mbit/s coaxial physical layer conformance test plan | |
| Road vehicles \x96 Media Oriented Systems Transport (MOST) \x96 Part 12: 50-Mbit/s balanced media physical layer | |
| Road vehicles \x96 Media Oriented Systems Transport (MOST) \x96 Part 13: 50-Mbit/s balanced media physical layer conformance test plan | |
| Road vehicles \x96 Media Oriented Systems Transport (MOST) \x96 Part 14: Lean application layer | |
| Road vehicles \x96 Media Oriented Systems Transport (MOST) \x96 Part 15: Lean application layer conformance test plan | |
| Road vehicles \x96 Media Oriented Systems Transport (MOST) \x96 Part 1: General information and definitions | |
| Road vehicles \x96 Media Oriented Systems Transport (MOST) \x96 Part 2: Application layer | |
| Road vehicles \x96 Media Oriented Systems Transport (MOST) \x96 Part 3: Application layer conformance test plan | |
| Road vehicles \x96 Media Oriented Systems Transport (MOST) \x96 Part 4: Transport layer and network layer | |
| Road vehicles \x96 Media Oriented Systems Transport (MOST) \x96 Part 5: Transport layer and network layer conformance test plan | |
| Road vehicles \x96 Media Oriented Systems Transport (MOST) \x96 Part 6: Data link layer | |
| Road vehicles \x96 Media Oriented Systems Transport (MOST) \x96 Part 7: Data link layer conformance test plan | |
| Road vehicles \x96 Media Oriented Systems Transport (MOST) \x96 Part 8: 150-Mbit/s optical physical layer | |
| Road vehicles \x96 Media Oriented Systems Transport (MOST) \x96 Part 9: 150-Mbit/s optical physical layer conformance test plan | |
| Road vehicles \x96 Modular vehicle communication interface (MVCI) \x96 Part 2: Diagnostic protocol data unit (D-PDU API) | |
| Road vehicles \x96 Open diagnostic data exchange (ODX) \x96 Part 3: Fault symptom exchange description (FXD) | |
| Road vehicles \x96 Safety of the intended functionality | |
| Road vehicles \x96 Supply voltage of 48 V \x96 Electrical requirements and tests | |
| Robotics \x96 Modularity for service robots \x96 Part 1: General requirements | |
| Robotics \x96 Modularity for service robots \x96 Part 201: Common information model for modules | |
| Robotics \x96 Modularity for service robots \x96 Part 202: Information model for software modules | |
| Rubber- or plastic-coated fabrics \x96 Physical and mechanical test \x96 Determination of bending force | |
| Safety requirements for wetlaid-nonwoven machinery | |
| Sampling and test method for cleanable filter media taken from filters of systems in operation | |
| Security and resilience \x96 Authenticity, integrity and trust for products and documents \x96 General principles for product fraud risk and countermeasures | |
| Security and resilience \x96 Authenticity, integrity and trust for products and documents \x96 Guidelines for establishing interoperability among object identification systems to deter counterfeiting and illicit trade | |
| Security and resilience \x96 Authenticity, integrity and trust for products and documents \x96 Guidelines for interoperable object identification and related authentication systems to deter counterfeiting and illicit trade | |
| Security and resilience \x96 Authenticity, integrity and trust for products and documents \x96 Guidelines for the content, security, issuance and examination of excise tax stamps | |
| Security and resilience \x96 Authenticity, integrity and trust for products and documents \x96 Guidelines for the selection and performance evaluation of authentication solutions for material goods | |
| Security and resilience \x96 Authenticity, integrity and trust for products and documents \x96 Guidelines to establish a framework for trust and interoperability | |
| Security and resilience \x96 Authenticity, integrity and trust for products and documents \x96 Guidelines to establish and monitor a protection plan and its implementation | |
| Security and resilience \x96 Authenticity, integrity and trust for products and documents \x96 Specification and usage of visible digital seal (VDS) data format for authentication, verification and acquisition of data... | |
| Security and resilience \x96 Authenticity, integrity and trust for products and documents \x96 Validation procedures for the application of artefact metrics | |
| Security and resilience \x96 Business continuity management systems \x96 Requirements | |
| Security and resilience \x96 Community resilience \x96 Guidelines for conducting peer reviews | |
| Security and resilience \x96 Community resilience \x96 Guidelines for information exchange between organizations | |
| Security and resilience \x96 Community resilience \x96 Guidelines for planning recovery and renewal | |
| Security and resilience \x96 Community resilience \x96 Guidelines for supporting vulnerable persons in an emergency | |
| Security and resilience \x96 Crisis management \x96 Guidelines | |
| Security and resilience \x96 Emergency management \x96 Guidelines for implementation of a community-based landslide early warning system | |
| Security and resilience \x96 Emergency management \x96 Guidelines for monitoring facilities with identified hazards | |
| Security and resilience \x96 Emergency management \x96 Guidelines for the use of social media in emergencies | |
| Security and resilience \x96 Emergency management \x96 Part 1: General guidelines for the implementation of a community-based disaster early warning system | |
| Security and resilience \x96 Emergency management \x96 Part 2: Guidelines for the implementation of a community-based early warning system for landslides | |
| Security and resilience \x96 Emergency management \x96 Part 3: Guidelines for the implementation of a community-based early warning system for tsunamis | |
| Security and resilience \x96 Guidelines for hardened protective shelters | |
| Security and resilience \x96 Guidelines for hosting and organizing citywide or regional events | |
| Security and resilience \x96 Organizational resilience \x96 Guidelines for resilience policy and strategy | |
| Security and resilience \x96 Organizational resilience \x96 Principles and attributes | |
| Security and resilience \x96 Protective security \x96 Guidelines for crime prevention through environmental design | |
| Security and resilience \x96 Protective security \x96 Guidelines for the development of a security plan for an organization | |
| Security and resilience \x96 Protective security \x96 Part 2: Guidelines for crime prevention through environmental design for residential facilities | |
| Ship and marine technology \x96 Technical requirements for liquefied natural gas bunkering dry-disconnect/conne ct coupling | |
| Ships and marine technology - Launching appliances for free-fall lifeboats | |
| Ships and marine technology - Propeller shaft revolution indicators - Electric type and electronic type | |
| Ships and marine technology - Shipboard fire-fighters' outfits (protective clothing, gloves, boots and helmet) | |
| Ships and marine technology - Transmitting heading devices (THDs) - Part 1: Gyro-compasses | |
| Ships and marine technology - Transmitting heading devices (THDs) - Part 2: Geomagnetic principles | |
| Ships and marine technology - Transmitting heading devices (THDs) - Part 3: GNSS principles | |
| Ships and marine technology \x96 Bioassay methods for screening anti-fouling paints \x96 Part 1: General requirements | |
| Ships and marine technology \x96 Bioassay methods for screening anti-fouling paints \x96 Part 2: Barnacles | |
| Ships and marine technology \x96 Bioassay methods for screening anti-fouling paints \x96 Part 3: Mussels | |
| Ships and marine technology \x96 Bunker fuel mass flow meters on receiving vessel \x96 Requirements | |
| Ships and marine technology \x96 Full-scale test method for propeller cavitation observation and hull pressure measurement | |
| Ships and marine technology \x96 Guidelines for the operation and installation of voyage data recorder (VDR) | |
| Ships and marine technology \x96 Marine environment protection \x96 Tanks and piping systems for facilitating 5 ppm oil-water separation | |
| Ships and marine technology \x96 Navigation and ship operations \x96 Guidelines for onboard telephone equipment | |
| Ships and marine technology \x96 Performance test procedures for high-pressure pumps in LNG fuel gas supply systems (FGSS) for ships | |
| Ships and marine technology \x96 Performance test procedures for LNG fuel gas supply systems (FGSS) for ships | |
| Ships and marine technology \x96 Propeller pitch indicators | |
| Ships and marine technology \x96 Specification of high manganese austenitic steel used for LNG tanks on board ships | |
| Ships and marine technology \x96 Testing specification for handrails using electrical resistance trace heating | |
| Ships and marine technology \x96 Testing specification for stairsteps using electrical resistance trace heating | |
| Ships and marine technology \x96 Testing specification for walkways using electrical resistance trace heating | |
| Small craft \x96 Permanently installed petrol and diesel fuel tanks | |
| Smoke and heat control systems \x96 Part 3: Specifications for powered smoke and heat exhaust ventilators | |
| Societal security - Business continuity management systems - Guidance | |
| Societal security - Business continuity management systems - Requirements | |
| Societal security - Guidelines for exercises | |
| Societal security - Terminology | |
| Societal security - Video-surveillance - Export interoperability | |
| Societal security \x96 Emergency management \x96 Guidelines for colour-coded alerts | |
| Societal security \x96 Emergency management \x96 Guidelines for public warning | |
| Societal security \x96 Emergency management \x96 Requirements for incident response | |
| Societal security \x96 Guidelines for establishing partnering arrangements | |
| Societal security \x96 Mass evacuation \x96 Guidelines for planning | |
| Soil quality \x96 Determination of the effects of pollutants on soil flora \x96 Leaf fatty acid composition of plants used to assess soil quality | |
| Soil quality \x96 Use of extracts for the assessment of bioavailability of trace elements in soils | |
| Solid biofuels \x96 Simplified sampling method for small scale applications | |
| Solid recovered fuels \x96 Determination of ash content | |
| Solid recovered fuels \x96 Determination of calorific value | |
| Solid recovered fuels \x96 Determination of content of volatile matter | |
| Solid recovered fuels \x96 Determination of moisture content using the oven dry method \x96 Part 3: Moisture in general analysis sample | |
| Solid recovered fuels \x96 Methods for sampling | |
| Solid recovered fuels \x96 Methods for the determination of biomass content | |
| Solid recovered fuels \x96 Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method | |
| Solid recovered fuels \x96 Safe handling and storage of solid recovered fuels | |
| Solid recovered fuels \x96 Sample preparation | |
| Solid recovered fuels \x96 Specifications and classes | |
| Solid recovered fuels \x96 Vocabulary | |
| Specification and requirements of thermal spray coatings for power plant boiler tubes | |
| Springs \x96 Measurement and test parameters \x96 Part 1: Cold formed cylindrical helical compression springs | |
| Springs \x96 Measurement and test parameters \x96 Part 2: Cold formed cylindrical helical extension springs | |
| Springs \x96 Measurement and test parameters \x96 Part 3: Cold formed cylindrical helical torsion springs | |
| Station uniform for firefighters \x96 Amendment 1 | |
| Station uniform for firefighters | |
| Stationary source emissions \x96 Determination of the mass concentration of ammonia \x96 Manual method | |
| Stationary source emissions \x96 Sampling and determination of mercury compounds in flue gas using gold amalgamation trap | |
| Statistical methods - Process performance and capability statistics for measured quality characteristics | |
| Statistical methods in process management - Capability and performance - General principles and concepts | |
| Statistical methods in process management - Capability and performance - Part 6: Process capability statistics for characteristics following a multivariate normal distribution | |
| Statistical methods in process management - Capability and performance - Part 7: Capability of measurement processes | |
| Statistical methods in process management - Capability and performance - Part 8: Machine performance of a multi-state production process | |
| Statistical methods in process management \x96 Capability and performance \x96 Part 2: Process capability and performance of time-dependent process models | |
| Statistical methods in process management \x96 Capability and performance \x96 Part 3: Machine performance studies for measured data on discrete parts | |
| Statistical methods in process management \x96 Capability and performance \x96 Part 4: Process capability estimates and performance measures | |
| Statistical methods in process management \x96 Capability and performance \x96 Part 5: Process capability estimates and performance for attributive characteristics | |
| Statistical methods in process management \x96 Capability and performance \x96 Part 7: Capability of measurement processes \x96 Amendment 1 | |
| Sterile packaged ready for filling glass cartridges | |
| Sterile packaged ready for filling glass vials | |
| Sterilization of health care products \x96 Low temperature vaporized hydrogen peroxide \x96 Requirements for the development, validation and routine control of a sterilization process for medical devices | |
| Sustainability in buildings and civil engineering works \x96 Data templates for the use of environmental product declarations (EPDs) for construction products in building information modelling (BIM) | |
| Sustainability in buildings and civil engineering works \x96 Framework for methods of assessment of the environmental, social and economic performance of construction works as a basis for sustainability assessment \x96... | |
| Sustainability in buildings and civil engineering works \x96 Indicators and benchmarks \x96 Principles, requirements and guidelines | |
| Sustainability in buildings and civil engineering works \x96 Sustainability indicators \x96 Part 2: Framework for the development of indicators for civil engineering works | |
| Systems to manage terminology, knowledge and content - Concept-related aspects for developing and internationalizing classification systems | |
| Terminology products and services - Overview and guidance | |
| Test method for CMAS corrosion of thermal/environmenta l barrier coatings under dynamic thermal cycling | |
| Textiles \x96 Determination of fabric deformability by forced mechanical distension | |
| Textiles \x96 Determination of index ingredient from coloured textile \x96 Part 3: Myrobalan | |
| Textiles \x96 Determination of index ingredient from coloured textile \x96 Part 4: Catechu | |
| Textiles \x96 Determination of index ingredient from coloured textile \x96 Part 5: Lac | |
| Textiles \x96 Determination of index ingredient from coloured textile \x96 Part 6: Punica granatum | |
| Textiles \x96 Determination of index ingredient from coloured textiles \x96 Part 1: Madder | |
| Textiles \x96 Determination of index ingredient from coloured textiles \x96 Part 2: Turmeric | |
| Textiles \x96 Determination of short-chain chlorinated paraffins (SCCP) and middle-chain chlorinated paraffins (MCCP) in textile products out of different matrices by use of gas chromatography negative ion chemical ionization mass... | |
| Textiles and textile products \x96 Determination of organotin compounds \x96 Part 1: Derivatisation method using gas chromatography | |
| Textiles and textile products \x96 Determination of organotin compounds \x96 Part 2: Direct method using liquid chromatography | |
| Thermal insulation \x96 Test method for thermal diffusivity \x96 Periodic heat method | |
| Thermal insulation for buildings \x96 Reflective insulation products \x96 Determination of thermal performance | |
| Thermal insulation products \x96 Aerogel blanket for buildings \x96 Specification | |
| Timber structures \x96 Bending applications of I-beams \x96 Part 2: Component performance and manufacturing requirements | |
| Timber structures \x96 Laminated veneer lumber \x96 Structural properties | |
| Tobacco - Determination of tobacco specific nitrosamines - Method using buffer extraction | |
| Tobacco and tobacco products \x96 Determination of tobacco-specific nitrosamines in tobacco products \x96 Method using LC-MS/MS | |
| Tourism and related services \x96 Accessible tourism for all \x96 Requirements and recommendations | |
| Tourism and related services \x96 Bareboat charter \x96 Supplementary charter services and experiences | |
| Tourism and related services \x96 Heritage hotels \x96 Equipment and service requirements | |
| Tourism and related services \x96 Hotels \x96 Service requirements | |
| Tourism and related services \x96 Medical spas \x96 Service requirements | |
| Tourism and related services \x96 Medical tourism \x96 Service requirements | |
| Tourism and related services \x96 Traditional restaurants \x96 Visual aspects, decoration and services | |
| Traditional Chinese medicine \x96 Acupoint magnetotherapy plasters for single use | |
| Traditional Chinese medicine \x96 Thread-embedding acupuncture needle for single use | |
| Transfer sets for pharmaceutical preparations \x96 Requirements and test methods | |
| Vulcanized rubber - Guide to storage | |
| Water pipe tobacco smoking machine \x96 Definitions and standard conditions | |
| Water quality - Determination of sulfates - Method by continuous flow analysis (CFA) | |
| Water quality - Evaluation of genotoxicity by measurement of the induction of micronuclei - Part 1: Evaluation of genotoxicity using amphibian larvae | |
| Water quality \x96 Determination of alkylmercury compounds in water \x96 Method using gas chromatography-mass spectrometry (GC-MS) after phenylation and solvent extraction | |
| Water quality \x96 Determination of microcystins \x96 Method using liquid chromatography and tandem mass spectrometry (LC-MS/MS) | |
| Water quality \x96 Determination of perfluoroalkyl and polyfluoroalkyl substances (PFAS) in water \x96 Method using solid phase extraction and liquid chromatography-tande m mass spectrometry (LC-MS/MS) | |
| Water quality \x96 Determination of the dissolved fraction of selected active pharmaceutical ingredients, transformation products and other organic substances in water and treated waste water \x96 Method using high performance... | |
| Water quality \x96 Determination of total cyanide \x96 Method using segmented flow injection, in-line ultraviolet digestion analysis by gas diffusion and amperometric detection | |
| Water quality \x96 Determination of total organic carbon (TOC), dissolved organic carbon (DOC), total bound nitrogen (TNb), dissolved bound nitrogen (DNb), total bound phosphorus (TPb) and dissolved bound phosphorus (DPb)... | |
| Water quality \x96 Guidance for rapid radioactivity measurements in nuclear or radiological emergency situation | |
| Water quality \x96 Iron-55 \x96 Test method using liquid scintillation counting | |
| Water quality \x96 Radium 226 and Radium 228 \x96 Test method using liquid scintillation counting | |
| Water quality \x96 Technetium-99 \x96 Part 1: Test method using liquid scintillation counting | |
| Water quality \x96 Technetium-99 \x96 Part 2: Test method using inductively coupled plasma mass spectrometry (ICP-MS) | |
| Welding consumables \x96 Wire electrodes, wires, rods and deposits for gas shielded arc welding of creep-resisting steels \x96 Classification | |
| Windows and pedestrian doors \x96 Vocabulary | |
| Workplace air \x96 Gases and vapours \x96 Requirements for evaluation of measuring procedures using pumped samplers | |
| Workplace air \x96 Metals and metalloids in airborne particles \x96 Requirements for evaluation of measuring procedures | |
| Workplace atmospheres \x96 Determination of inorganic acids by ion chromatography \x96 Part 1: Non-volatile acids (sulfuric acid and phosphoric acid) | |
| Workplace atmospheres \x96 Determination of inorganic acids by ion chromatography \x96 Part 2: Volatile acids, except hydrofluoric acid (hydrochloric acid, hydrobromic acid and nitric acid) | |
| XLIFF (XML Localisation interchange file format) |
| << Prev | Next >> |