Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
400
450
500
550
600
650
680
690
700
710
720
730
732
733
734
735
736
737
738
739
740
741
742
743
744
750
760
770
780
790
800
850
900
950
1000
1050
1100
1500
1620
| Product Name | Notes |
|---|---|
| Acoustics - Description, measurement and assessment of environmental noise - Part 1: Basic quantities and assessment procedures | |
| Acoustics - Estimation of noise-induced hearing loss | |
| Acoustics - Unattended monitoring of aircraft sound in the vicinity of airports | |
| Acoustics \x96 Characterization of sources of structure-borne sound and vibration \x96 Indirect measurement of blocked forces | |
| Acoustics \x96 Description, measurement and assessment of environmental noise \x96 Part 2: Determination of environmental noise levels | |
| Acoustics \x96 Hearing aid fitting management (HAFM) | |
| Acoustics \x96 Hearing aid fitting management \x96 Part 2: Tele-services as part of hearing aid fitting management (tHAFM) | |
| Acoustics \x96 Screens, furniture and single objects intended for interior use \x96 Rating of sound absorption and sound reduction of elements based on laboratory measurements | |
| Adhesives \x96 Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures | |
| Adventure tourism - Information for participants | |
| Adventure tourism - Safety management systems - Requirements | |
| Adventure tourism \x96 Good practices for sustainability \x96 Requirements and recommendations | |
| Adventure tourism \x96 Leaders \x96 Personnel competence | |
| Adventure tourism \x96 Safety management systems \x96 Requirements | |
| Air cargo \x96 Restraint slings \x96 Part 1: Design and testing | |
| Air cargo \x96 Restraint slings \x96 Part 2: Utilization requirements and recommendations and lashing calculations | |
| Air cargo unit load devices \x96 Performance requirements and test parameters | |
| Aircraft \x96 Connections for starting engines by air | |
| Aircraft ground equipment \x96 Design, testing and maintenance requirements for nose gear towbarless towing vehicle (TLTV) \x96 Part 2: Regional aircraft | |
| Aircraft ground equipment \x96 Nose gear towbarless towing vehicle (TLTV) -- Design, testing and maintenance requirements \x96 Part 1: Main line aircraft | |
| Anaesthetic and respiratory equipment \x96 Passive humidifiers | |
| Animal and vegetable fats and oils \x96 Determination of trace elements by inductively coupled plasma optical emission spectroscopy (ICP-OES) | |
| Animal feeding stuffs \x96 Vocabulary | |
| Anodizing of aluminium and its alloys - Accelerated test of light fastness of coloured anodic oxide coatings using artificial light | |
| Anodizing of aluminium and its alloys \x96 Determination of mass per unit area (surface density) of anodic oxidation coatings \x96 Gravimetric method | |
| Assistive products for tissue integrity when lying down \x96 Part 1: General requirements | |
| Assistive products for tissue integrity when lying down \x96 Part 5: Test method for resistance to cleaning and disinfection | |
| Automation systems and integration \x96 Evaluating energy efficiency and other factors of manufacturing systems that influence the environment \x96 Part 1: Overview and general principles | |
| Automation systems and integration \x96 Evaluating energy efficiency and other factors of manufacturing systems that influence the environment \x96 Part 2: Environmental performance evaluation process | |
| Automation systems and integration \x96 Evaluating energy efficiency and other factors of manufacturing systems that influence the environment \x96 Part 3: Environmental performance evaluation data aggregation process | |
| Automation systems and integration \x96 Evaluating energy efficiency and other factors of manufacturing systems that influence the environment \x96 Part 5: Environmental performance evaluation data | |
| Banking and related financial services \x96 Key wrap using AES | |
| Biogas \x96 Biogas production, conditioning, upgrading and utilization \x96 Terms, definitions and classification scheme | |
| Biotechnology \x96 Ancillary materials present during the production of cellular therapeutic products and gene therapy products | |
| Biotechnology \x96 Biobanking \x96 General requirements for biobanking | |
| Biotechnology \x96 Bioprocessing \x96 General requirements for the design of packaging to contain cells for therapeutic use | |
| Biotechnology \x96 Cell counting \x96 Part 1: General guidance on cell counting methods | |
| Biotechnology \x96 Cell counting \x96 Part 2: Experimental design and statistical analysis to quantify counting method performance | |
| Biotechnology \x96 Massively parallel sequencing \x96 Part 1: Nucleic acid and library preparation | |
| Biotechnology \x96 Massively parallel sequencing \x96 Part 2: Quality evaluation of sequencing data | |
| Biotechnology \x96 Nucleic acid synthesis \x96 Part 1: Requirements for the production and quality control of synthesized oligonucleotides | |
| Biotechnology \x96 Requirements for data formatting and description in the life sciences | |
| Biotechnology \x96 Requirements for evaluating the performance of quantification methods for nucleic acid target sequences \x96 qPCR and dPCR | |
| Building and civil engineering sealants \x96 Assessment of the fungal growth on sealant surfaces | |
| Buy-Ship-Pay reference data model \x96 Part 1: Business requirements specification (BRS) | |
| Catheter systems for neuraxial application \x96 Sterile and single-use catheters and accessories | |
| Charge conditioning of aerosol particles for particle characterization and the generation of calibration and test aerosols | |
| Chemical analysis of raw materials and refractory products containing silicon-carbide, silicon-nitride, silicon-oxynitride and sialon \x96 Part 1: General information, terminology and sample preparation | |
| Chemical analysis of raw materials and refractory products containing silicon-carbide, silicon-nitride, silicon-oxynitride and sialon \x96 Part 2: Determination of volatile components, total carbon, free carbon, silicon carbide, total and free... | |
| Chemical analysis of raw materials and refractory products containing silicon-carbide, silicon-nitride, silicon-oxynitride and sialon \x96 Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents | |
| Chemical analysis of raw materials and refractory products containing silicon-carbide, silicon-nitride, silicon-oxynitride and sialon \x96 Part 4: XRD methods | |
| Cigarettes - Determination of carbon monoxide in sidestream smoke - Method using a routine analytical linear smoking machine equipped with a fishtail chimney | |
| Cigarettes - Determination of nicotine-free dry particulate matter and nicotine in sidestream smoke - Method using a routine analytical linear smoking machine equipped with a fishtail chimney | |
| Cigarettes \x96 Determination of selected carbonyls in the mainstream smoke of cigarettes \x96 Method using high performance liquid chromatography | |
| Cigarettes \x96 Determination of selected volatile organic compounds in the mainstream smoke of cigarettes \x96 Method using GC/MS | |
| Cigarettes \x96 Generation and collection of total particulate matter using a routine analytical smoking machine with an intense smoking regime AMENDMENT 1 | |
| Cigarettes \x96 Generation and collection of total particulate matter using a routine analytical smoking machine with an intense smoking regime | |
| Cigarettes \x96 Routine analytical cigarette smoking machine \x96 Definitions and standard conditions with an intense smoking regime | |
| Clinical laboratory testing and in vitro diagnostic test systems \x96 Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices \x96 Part 2: Evaluation of performance... | |
| Combined accept-zero sampling systems and process control procedures for product acceptance | |
| Condition monitoring and diagnostics of machine systems - Electrical signature analysis of three-phase induction motors | |
| Continuous mechanical handling equipment - Light duty belt conveyors for loose bulk materials | |
| Conveyor belts \x96 Drum friction testing | |
| Corrosion of metals and alloys \x96 Corrosivity of atmospheres \x96 Mapping areas of increased risk of corrosion | |
| Corrosion of metals and alloys \x96 Determination of the corrosion rates of embedded steel reinforcement in concrete exposed to simulated marine environments | |
| Corrosion tests in artificial atmospheres \x96 Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying | |
| Cosmetics \x96 Analytical methods \x96 Measurement of traces of heavy metals in cosmetic finished products using ICP/MS technique | |
| Cosmetics \x96 Microbiology \x96 Testing of impregnated or coated wipes and masks | |
| Cryogenic vessels \x96 Hoses | |
| Cryogenic vessels \x96 Static vacuum-insulated vessels \x96 Part 1: Design, fabrication, inspection and tests | |
| Cryogenic vessels \x96 Static vacuum-insulated vessels \x96 Part 2: Operational requirements | |
| Dentistry \x96 Digital impression devices \x96 Part 1: Methods for assessing accuracy | |
| Dentistry \x96 Manual toothbrushes \x96 General requirements and test methods | |
| Dentistry \x96 Physical properties of powered toothbrushes | |
| Dentistry \x96 Pre-capsulated dental amalgam | |
| Dentistry \x96 Vocabulary and designation system for forensic oro-dental data | |
| Determination of the resistance to cryogenic spillage of insulation materials \x96 Part 2: Vapour phase | |
| Determination of the resistance to cryogenic spillage of insulation materials \x96 Part 3: Jet release | |
| Determination of the specific surface area of porous and particulate systems by small-angle X-ray scattering (SAXS) | |
| Digital cameras \x96 Measurement method for image stabilization performance \x96 Part 1: Optical systems | |
| Dosimetry for exposures to cosmic radiation in civilian aircraft \x96 Part 1: Conceptual basis for measurements | |
| Dosimetry for exposures to cosmic radiation in civilian aircraft \x96 Part 2: Characterization of instrument response | |
| Dosimetry for exposures to cosmic radiation in civilian aircraft \x96 Part 3: Measurements at aviation altitudes | |
| Dosimetry for exposures to cosmic radiation in civilian aircraft \x96 Part 4: Validation of codes | |
| E-liquid \x96 Determination of nicotine, propylene glycol and glycerol in liquids used in electronic nicotine delivery devices \x96 Gas chromatographic method | |
| Electrically propelled road vehicles \x96 Determination of power for propulsion of hybrid electric vehicle | |
| Enteral feeding systems \x96 Design and testing | |
| Equipment for crop protection - Induction hoppers - Part 1: Test methods | |
| Equipment for crop protection - Knapsack sprayers - Part 1: Requirements and test methods | |
| Equipment for crop protection - Knapsack sprayers - Part 2: Performance limits | |
| Equipment for crop protection - Sprayer filters - Colour coding for identification | |
| Equipment for crop protection \x96 Closed transfer systems (CTS) \x96 Performance specification | |
| Ergonomics \x96 3-D scanning methodologies for internationally compatible anthropometric databases \x96 Part 2: Evaluation protocol of surface shape and repeatability of relative landmark positions | |
| Event sustainability management systems \x96 Requirements with guidance for use | |
| Eye and face protection \x96 Guidance on selection, use and maintenance | |
| Eye and face protection \x96 Protection against laser radiation \x96 Part 1: Requirements and test methods | |
| Fibre-reinforced plastic composites \x96 Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus | |
| Financial services - Universal financial industry message scheme - Part 1: Metamodel | |
| Financial services - Universal financial industry message scheme - Part 2: UML profile | |
| Financial services - Universal financial industry message scheme - Part 3: Modelling | |
| Financial services - Universal financial industry message scheme - Part 4: XML Schema generation | |
| Financial services - Universal financial industry message scheme - Part 5: Reverse engineering | |
| Financial services - Universal financial industry message scheme - Part 6: Message transport characteristics | |
| Financial services - Universal financial industry message scheme - Part 7: Registration | |
| Financial services - Universal financial industry message scheme - Part 8: ASN.1 generation | |
| Financial services \x96 Entity legal forms (ELF) | |
| Fine bubble technology \x96 Storage and transportation of ultrafine bubble dispersion in water | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Determination of oxidation resistance of non-oxide monolithic ceramics | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure \x96 Determination of tensile properties of tubes | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Mechanical properties of ceramic composites at room temperature \x96 Determination of compressive properties | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Mechanical properties of ceramic composites at room temperature \x96 Determination of the interlaminar shear strength and shear modulus of continuous-fibre-rei nforced composites... | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Weibull statistics for strength data | |
| Fire safety engineering \x96 Active fire protection systems \x96 Part 1: General principles | |
| Fire safety engineering \x96 Verification and validation protocol for building fire evacuation models | |
| Fire test procedures for divisional elements that are typically used in oil, gas and petrochemical industries \x96 Part 1: General requirements | |
| Fire test procedures for divisional elements that are typically used in oil, gas and petrochemical industries \x96 Part 2: Additional procedures for pipe penetration and cable transit sealing systems | |
| Footwear \x96 Chemical tests \x96 General principles on the preparation of samples | |
| Footwear \x96 Critical substances potentially present in footwear and footwear components \x96 Determination of certain organic solvents | |
| Footwear \x96 Identification of defects during visual inspection \x96 Vocabulary | |
| Footwear \x96 Test method for insoles and insocks \x96 Dimensional change after cycle of wetting and drying | |
| Footwear \x96 Test methods for heels \x96 Heel pin holding strength | |
| Forensic sciences \x96 Part 1: Vocabulary | |
| Forensic sciences \x96 Part 3: Analysis | |
| Forensic sciences \x96 Part 4: Interpretation | |
| Forensic sciences \x96 Part 5: Reporting | |
| Furniture \x96 Beds \x96 Test methods for the determination of stability, strength and durability | |
| Gas cylinders \x96 Cylinder bundles \x96 Periodic inspection and testing | |
| Gaseous Hydrogen \x96 Fuel system components for hydrogen-fuelled vehicles \x96 Part 1: Land vehicles | |
| Gaseous hydrogen \x96 Fuelling protocols for hydrogen-fuelled vehicles \x96 Part 1: Design and development process for fuelling protocols | |
| Gaseous hydrogen \x96 Fuelling stations \x96 Part 1: General requirements | |
| Gaseous hydrogen \x96 Fuelling stations \x96 Part 2: Dispensers and dispensing systems | |
| Gaseous hydrogen \x96 Fuelling stations \x96 Part 3: Valves | |
| Gaseous hydrogen \x96 Fuelling stations \x96 Part 5: Dispenser hoses and hose assemblies | |
| Gaseous hydrogen \x96 Fuelling stations \x96 Part 8: Fuel quality control \x96 Amendment 1: Alignment with Grade D of ISO 14687 | |
| Gaseous hydrogen \x96 Fuelling stations \x96 Part 8: Fuel quality control | |
| Gaseous hydrogen \x96 Fuelling stations \x96 Part 9: Sampling for fuel quality analysis | |
| Gaseous hydrogen \x96 Land vehicle fuel containers | |
| Gaseous hydrogen \x96 Thermally activated pressure relief devices for compressed hydrogen vehicle fuel containers | |
| Generation and analysis of toxic gases in fire \x96 Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires | |
| Genomics informatics \x96 Omics Markup Language (OML) | |
| Geometrical product specifications (GPS) -- Decomposition of geometrical characteristics for manufacturing control | |
| Geometrical product specifications (GPS) \x96 Transition specification | |
| Glass in building -- Vacuum insulating glass -- Part 1: Basic specification of products and evaluation methods for thermal and sound insulating performance | |
| Glass in building \x96 Heat soaked tempered soda lime silicate safety glass | |
| Glass in building \x96 Vacuum insulating glass \x96 Part 3: Test methods for evaluation of performance under temperature differences | |
| Guidance for assessment and evaluation of changes to drug delivery systems | |
| Health informatics - Health cards - General characteristics | |
| Health informatics \x96 Health cards \x96 Numbering system and registration procedure for issuer identifiers | |
| Heat pump water heaters \x96 Testing and rating for performance \x96 Part 1: Heat pump water heater for hot water supply | |
| Heat pump water heaters \x96 Testing and rating for performance \x96 Part 2: Heat pump water heaters for space heating | |
| Heat treatment \x96 Control of quality | |
| Hygrothermal performance of building materials and products - Determination of water-vapour transmission properties - Box method | |
| Implants for surgery - Metallic materials - Classification of microstructures for alpha+beta titanium alloy bars | |
| In vitro diagnostic medical devices \x96 Clinical performance studies using specimens from human subjects \x96 Good study practice | |
| In vitro diagnostic medical devices \x96 Requirements for international harmonisation protocols establishing metrological traceability of values assigned to calibrators and human samples | |
| Industrial automation systems and integration \x96 Service interface for testing applications \x96 Part 5: Application program service interface | |
| Industrial trucks \x96 Safety rules for application, operation and maintenance | |
| Infant formula and adult nutritionals \x96 Determination of total folate content by trienzyme extraction and ultra high performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS) | |
| Infant formula and adult nutritionals \x96 Determination of total iodine \x96 Inductively coupled plasma mass spectrometry (ICP-MS) | |
| Infant formula and adult nutritionals \x96 Determination of vitamin C by (ultra) high performance liquid chromatography with ultraviolet detection ((U)HPLC-UV) | |
| Infant formula and adult nutritionals \x96 Determination of vitamin D by liquid chromatography-mass spectrometry | |
| Information and documentation - A reference ontology for the interchange of cultural heritage information | |
| Information and documentation - International Standard Text Code (ISTC) | |
| Information and documentation - Schema for holdings information | |
| Information and documentation \x96 Data exchange protocol for interoperability and preservation | |
| Information and documentation \x96 International Standard Book Number (ISBN) | |
| Information and documentation \x96 Key indicators for museums | |
| Information and documentation \x96 Quality assessment for national libraries | |
| Information and documentation \x96 Transliteration of scripts in use in Thailand \x96 Part 1: Transliteration of Akson-Thai-Noi | |
| Information technology - Data communication - 25-pole DTE/DCE interface connector and contact number assignments | |
| Inland navigation vessels \x96 Small floating working machines \x96 Requirements and test methods | |
| Installation and equipment for liquefied natural gas \x96 Design of floating LNG installations \x96 Part 1: General requirements | |
| Installation and equipment for liquefied natural gas \x96 Design of floating LNG installations \x96 Part 2: Specific FSRU issues (ISO 20257-2:2021) | |
| Intelligent transport systems \x96 Cooperative adaptive cruise control systems (CACC) \x96 Performance requirements and test procedures | |
| Intelligent transport systems \x96 Emergency electronic brake light systems (EEBL) \x96 Performance requirements and test procedures | |
| Intelligent transport systems \x96 Geographic Data Files (GDF) GDF5.1 \x96 Part 1: Application independent map data shared between multiple sources | |
| Intelligent transport systems \x96 Geographic Data Files (GDF) GDF5.1 \x96 Part 2: Map data used in automated driving systems, Cooperative ITS, and multi-modal transport | |
| Intelligent transport systems \x96 Information for emergency service support via personal ITS station \x96 Part 1: General requirements and technical definition | |
| Intelligent transport systems \x96 ITS station security services for secure session establishment and authentication between trusted devices | |
| Intelligent transport systems \x96 Station and communication architecture | |
| Intelligent transport systems \x96 Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) \x96 Part 10: Conditional access information (TPEG2-CAI) | |
| Intelligent transport systems \x96 Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) \x96 Part 14: Parking information (TPEG2-PKI) | |
| Intelligent transport systems \x96 Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) \x96 Part 15: Traffic event compact (TPEG2-TEC) | |
| Intelligent transport systems \x96 Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) \x96 Part 16: Fuel price information and availability (TPEG2-FPI) | |
| Intelligent transport systems \x96 Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) \x96 Part 18: Traffic flow and prediction application (TPEG2-TFP) | |
| Intelligent transport systems \x96 Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) \x96 Part 19: Weather information (TPEG2-WEA) | |
| Intelligent transport systems \x96 Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) \x96 Part 1: Introduction, numbering and versions (TPEG2-INV) | |
| Intelligent transport systems \x96 Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) \x96 Part 21: Geographic location referencing (TPEG-GLR) | |
| Intelligent transport systems \x96 Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) \x96 Part 2: UML modelling rules (TPEG2-UMR) | |
| Intelligent transport systems \x96 Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) \x96 Part 3: UML to binary conversion rules (TPEG2-UBCR) | |
| Intelligent transport systems \x96 Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) \x96 Part 4: UML to XML conversion rules | |
| Intelligent transport systems \x96 Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) \x96 Part 5: Service framework (TPEG2-SFW) | |
| Intelligent transport systems \x96 Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) \x96 Part 7: Location referencing container (TPEG2-LRC) | |
| Intelligent transport systems \x96 Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) \x96 Part 9: Service and network information (TPEG2-SNI) | |
| Intelligent transport systems \x96 Traffic and travel information via transport protocol experts group, generation 2 (TPEG2) \x96 Part 17: Speed information (TPEG2-SPI) | |
| Intelligent transport systems \x96 Traffic and travel information(TTI) via transport protocol experts group, generation 2 (TPEG2) \x96 Part 6: Message management container (TPEG2-MMC) | |
| Interpreting services \x96 Legal interpreting \x96 Requirements | |
| Leather \x96 Chemical tests \x96 Guidelines for testing critical chemicals in leather | |
| Leather \x96 Determination of degradability by micro-organisms | |
| Leather \x96 Tests for colour fastness \x96 Colour fastness to crocking | |
| Life cycle analysis and recycling of ductile iron pipes for water applications | |
| Life cycle inventory calculation methodology for steel products | |
| Light conveyor belts \x96 Determination of electrical resistances | |
| Liquid pumps and pumps units \x96 Noise test code \x96 Grades 2 and 3 of accuracy | |
| Lubricants \x96 Determination of the coefficient of friction of synchronizer lubricated by manual transmission fluids (MTF) \x96 High-frequency, linear-oscillation (SRV) test machine | |
| Maize (Zea mays L.) \x96 Specification \x96 AMENDMENT 1: Feed maize | |
| Maize (Zea mays L.) \x96 Specification | |
| Market, opinion and social research - Vocabulary and service requirements | |
| Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products - Determination of acetate content | |
| Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products - Determination of citrate content | |
| Measurement and characterization of particles by acoustic methods \x96 Part 2: Linear theory | |
| Measurement and characterization of particles by acoustic methods \x96 Part 3: Guidelines for non-linear theory | |
| Measurement of radioactivity \x96 Gamma-ray emitting radionuclides \x96 Generic test method using gamma-ray spectrometry | |
| Measurement of radioactivity in the environment \x96 Air: aerosol particles \x96 Test method using sampling by filter media | |
| Measurement of the radioactivity in the environment \x96 Air: tritium \x96 Test method using bubbler sampling | |
| Mechanical vibration \x96 Measurement and evaluation of machine vibration \x96 Part 1: General guidelines | |
| Mechanical vibration \x96 Measurement and evaluation of machine vibration \x96 Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds... | |
| Mechanical vibration \x96 Measurement and evaluation of machine vibration \x96 Part 3: Industrial machinery with a power rating above 15 kW and operating speeds between 120 r/min and 30 000... | |
| Mechanical vibration \x96 Measurement and evaluation of machine vibration \x96 Part 4: Gas turbines in excess of 3 MW, with fluid-film bearings | |
| Mechanical vibration \x96 Measurement and evaluation of machine vibration \x96 Part 5: Machine sets in hydraulic power generating and pump-storage plants | |
| Mechanical vibration \x96 Measurement and evaluation of machine vibration \x96 Part 8: Reciprocating compressor systems | |
| Mechanical vibration \x96 Measurement and evaluation of machine vibration \x96 Part 9: Gear units | |
| Mechanical vibration \x96 Measurement of vibration on ships \x96 Part 5: Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on passenger and merchant ships | |
| Mechanical vibration, shock and condition monitoring \x96 Vocabulary | |
| Medical devices \x96 Information to be supplied by the manufacturer | |
| Metallic and other inorganic coatings \x96 Surface treatment, metallic and other inorganic coatings \x96 Vocabulary | |
| Metallic materials \x96 Uniaxial creep testing in tension \x96 Method of test | |
| Metallic tube connections for fluid power and general use \x96 Test methods for hydraulic fluid power connections | |
| Meteorology \x96 Weather radar \x96 Part 1: System performance and operation | |
| Methods for sampling and analysis of fire effluents | |
| Microbeam analysis \x96 Methods of specimen preparation for analysis of general powders using WDS and EDS | |
| Microbiology of the food chain \x96 Guidelines for conducting challenge tests of food and feed products \x96 Part 1: Challenge tests to study the growth potential, lag time and the... | |
| Microbiology of the food chain \x96 Polymerase chain reaction (PCR) for the detection of microorganisms \x96 Thermal performance testing of thermal cyclers | |
| Microbiology of the food chain \x96 Requirements and guidelines for conducting challenge tests of food and feed products \x96 Part 2: Challenge tests to study inactivation potential and kinetic parameters... | |
| Milk \x96 Quantitative determination of microbiological quality \x96 Guidance for establishing and verifying a conversion relationship between results of an alternative method and anchor method results | |
| Molecular biomarker analysis \x96 Methods of analysis for the detection and identification of animal species in foods and food products (nucleic acid-based methods) \x96 General requirements and definitions | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes for formalin-fixed and paraffin-embedded (FFPE) tissue \x96 Part 3: Isolated DNA | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes for frozen tissue \x96 Part 1: Isolated RNA | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes for frozen tissue \x96 Part 3: Isolated DNA | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes for venous whole blood \x96 Part 1: Isolated cellular RNA | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes for venous whole blood \x96 Part 2: Isolated genomic DNA | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes for venous whole blood \x96 Part 3: Isolated circulating cell free DNA from plasma | |
| Molecular in vitro diagnostic examinations \x96 Specifications for preexamination processes for formalin-fixed and paraffin-embedded (FFPE) tissue \x96 Part 4: In situ detection techniques | |
| Nanotechnologies \x96 Measurements of particle size and shape distributions by scanning electron microscopy | |
| Nanotechnologies \x96 Measurements of particle size and shape distributions by transmission electron microscopy | |
| Nanotechnologies \x96 Testing the photocatalytic activity of nanoparticles for NADH oxidation | |
| Natural gas \x96 Calculation of thermodynamic properties \x96 Part 5: Calculation of viscosity, Joule-Thomson coefficient, and isentropic exponent | |
| Non-destructive testing of welds \x96 Ultrasonic testing \x96 Use of automated phased array technology for steel components with small wall thickness | |
| Office furniture - Office work chairs - Test methods for the determination of stability, strength and durability | |
| Office furniture - Tables and desks - Test methods for the determination of stability, strength and durability | |
| Oil and gas industries including lower carbon energy \x96 Site-specific assessment of mobile offshore units \x96 Part 1: Jack-ups: elevated at a site \x96 Amendment 1: Corrections to strength of... | |
| Oil and gas industries including lower carbon energy \x96 Site-specific assessment of mobile offshore units \x96 Part 1: Jack-ups: elevated at a site | |
| Oil and gas industries including lower carbon energy \x96 Specific requirements for offshore structures \x96 Part 3: Topsides structure | |
| Oil and gas industries including lower carbon energy \x96 Specific requirements for offshore structures \x96 Part 4: Geotechnical design considerations | |
| Ophthalmic instruments \x96 Corneal topographers | |
| Ophthalmic optics \x96 Contact lenses \x96 Hygienic management of multipatient use trial contact lenses | |
| Packaging - Vocabulary - Part 2: Packaging and the environment terms | |
| Packaging \x96 Plastics drums \x96 Part 3: Plug bung closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l | |
| Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces | |
| Paints and varnishes \x96 Determination of image clarity (degree of sharpness of reflected or transmitted image) | |
| Paints and varnishes \x96 Determination of stone-chip resistance of coatings \x96 Part 2: Single-impact test with a guided impact body | |
| Paints and varnishes \x96 Determination of stone-chip resistance of coatings \x96 Part 4: Mobile multi-impact testing on a small testing area | |
| Paints and varnishes \x96 Determination of the scratch resistance of a coating system using a laboratory-scale car-wash | |
| Paints and varnishes \x96 Performance requirements for protective paint systems for offshore and related structures | |
| Performance evaluation protocol for digital fitting systems -- Part 2: Virtual garment | |
| Performance evaluation protocol for digital fitting systems \x96 Part 1: Accuracy of virtual human body representation | |
| Performance evaluation protocol for digital fitting systems \x96 Part 3: Digital fitting performance \x96 Gap | |
| Performance of buildings \x96 Building enclosure thermal performance verification and commissioning \x96 Part 1: General requirements | |
| Personal protective equipment \x96 Occupational footwear | |
| Personal protective equipment \x96 Protective footwear \x96 Amendment 1 | |
| Personal protective equipment \x96 Protective footwear | |
| Personal protective equipment \x96 Safety footwear \x96 Amendment 1 | |
| Personal protective equipment \x96 Safety footwear | |
| Personal protective equipment \x96 Test methods for footwear \x96 Amendment 1 | |
| Personal protective equipment \x96 Test methods for footwear | |
| Petroleum and natural gas industries -- Specific requirements for offshore structures -- Part 9: Structural integrity management | |
| Petroleum and natural gas industries \x96 Arctic offshore structures | |
| Petroleum and natural gas industries \x96 Concrete offshore structures | |
| Petroleum and natural gas industries \x96 Fixed steel offshore structures | |
| Petroleum and natural gas industries \x96 Floating offshore structures \x96 Part 1: Ship-shaped, semi-submersible, spar and shallow-draught cylindrical structures (ISO 19904-1:2019) | |
| Petroleum and natural gas industries \x96 General requirements for offshore structures | |
| Petroleum and natural gas industries \x96 Site-specific assessment of mobile offshore units \x96 Part 3: Floating unit | |
| Petroleum and natural gas industries \x96 Specific requirements for offshore structures \x96 Part 10: Marine geophysical investigations | |
| Petroleum and natural gas industries \x96 Specific requirements for offshore structures \x96 Part 2: Seismic design procedures and criteria | |
| Petroleum and natural gas industries \x96 Specific requirements for offshore structures \x96 Part 5: Weight management | |
| Petroleum and natural gas industry \x96 Pipeline transportation systems \x96 Geological hazards risk management for onshore pipeline (ISO/FDIS 20074:2019) | |
| Petroleum products \x96 Determination of sulfur content of automotive fuels \x96 Ultraviolet fluorescence method | |
| Petroleum products \x96 Determination of sulfur content of automotive fuels \x96 Wavelength-dispersiv e X-ray fluorescence spectrometry \x96 Amendment 1: Addition of the SSD detector to the Monochromatic excitation part of... | |
| Petroleum products \x96 Determination of sulfur content of automotive fuels \x96 Wavelength-dispersiv e X-ray fluorescence spectrometry | |
| Petroleum products and lubricants \x96 Determination of cone penetration of lubricating greases and petrolatum | |
| Petroleum, petrochemical and natural gas industries \x96 Safety of machineries \x96 Powered elevators | |
| Photography \x96 Digital still cameras \x96 Battery life measurement | |
| Pigments and extenders \x96 Dispersion procedure for sedimentation-based particle sizing of suspended pigment or extender with liquid sedimentation methods | |
| Plastics \x96 Decorative solid surfacing materials \x96 Part 3: Determination of properties \x96 Solid surface shapes | |
| Plastics \x96 Ethylene-vinyl acetate (EVAC) moulding and extrusion materials \x96 Part 1: Designation system and basis for specifications | |
| Plastics \x96 Ethylene/vinyl acetate (EVAC) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties | |
| Plastics \x96 Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials \x96 Part 1: Designation system and basis for specifications | |
| Plastics \x96 Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties | |
| Plastics \x96 Polybutene-1 (PB-1) moulding and extrusion materials \x96 Part 1: Designation system and basis for specifications | |
| Plastics \x96 Polybutene-1 (PB-1) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties | |
| Plastics \x96 Polycarbonate (PC) moulding and extrusion materials \x96 Part 1: Designation system and basis for specification | |
| Plastics \x96 Polycarbonate (PC) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties | |
| Plastics \x96 Thermoplastic polyester (TP) moulding and extrusion materials \x96 Part 1: Designation system and basis for specification | |
| Plastics \x96 Ultra-high-molecular -weight polyethylene (PE-UHMW) moulding and extrusion materials \x96 Part 1: Designation system and basis for specifications | |
| Plastics \x96 Ultra-high-molecular -weight polyethylene (PE-UHMW) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties | |
| Plastics \x96 Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials \x96 Part 1: Designation system and basis for specifications | |
| Plastics \x96 Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties | |
| Plastics \x96 Wood-plastic recycled composites (WPRC) \x96 Part 2: Test methods | |
| Plastics and rubber machines \x96 Injection moulding machines \x96 Safety requirements | |
| Plastics pipes and fittings - Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems | |
| Plastics pipes and fittings \x96 Butt fusion jointing procedures for polyethylene (PE) piping systems \x96 AMENDMENT 1 | |
| Plastics piping systems for non-pressure underground drainage and sewerage \x96 Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) \x96 Part 1: Material specification and performance... | |
| Plastics piping systems for non-pressure underground drainage and sewerage \x96 Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) \x96 Part 2: Pipes and fittings with... | |
| Plastics piping systems for non-pressure underground drainage and sewerage \x96 Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) \x96 Part 3: Pipes and fittings with... | |
| Prosthetics and orthotics \x96 Foot orthotics \x96 Uses, functions classification and description | |
| Prosthetics and orthotics \x96 Soft orthoses \x96 Uses, functions, classification and description | |
| Prosthetics and orthotics \x96 Terms relating to the treatment and rehabilitation of persons having a lower limb amputation | |
| Protective clothing for use in Snowboarding \x96 Wrist Protectors \x96 Requirements and test methods (ISO 20320:2020) | |
| Protective gloves \x96 General requirements and test methods | |
| Public key infrastructure for financial services \x96 Practices and policy framework | |
| Radiation protection \x96 Monitoring of workers occupationally exposed to a risk of internal contamination with radioactive material | |
| Radiological protection \x96 Monitoring and dosimetry for internal exposures due to wound contamination with radionuclides | |
| Radiological protection \x96 Performance criteria for laboratories using Fluorescence In Situ Hybridization (FISH) translocation assay for assessment of exposure to ionizing radiation | |
| Railway applications \x96 Calculation of braking performance (stopping, slowing and stationary braking) \x96 Part 1: General algorithms utilizing mean value calculation | |
| Railway applications \x96 Calculation of braking performance (stopping, slowing and stationary braking) \x96 Part 2: General algorithms utilizing step by step calculation | |
| Railway applications \x96 Recyclability and recoverability calculation method for rolling stock | |
| Reaction-to-fire tests - Small room test for pipe insulation products or systems | |
| Recreational diving services \x96 Requirements and guidance on environmentally sustainable practices in recreational diving | |
| Recreational diving services \x96 Requirements for training on environmental awareness for recreational divers (ISO/FDIS 21417:2019) | |
| Refractory test-piece preparation \x96 Gunning refractory panels by the pneumatic-nozzle mixing type guns | |
| Requirements for the collection and transport of samples for medical laboratory examinations | |
| Resistance welding \x96 Locking tapers for electrode holders and electrode caps | |
| Road vehicles \x96 Clock extension peripheral interface (CXPI) \x96 Part 2: Application layer | |
| Road vehicles \x96 Clock extension peripheral interface (CXPI) \x96 Part 3: Transport and network layer | |
| Road vehicles \x96 Clock extension peripheral interface (CXPI) \x96 Part 4: Data link layer and physical layer | |
| Road vehicles \x96 Clock extension peripheral interface (CXPI) \x96 Part 5: Application layer conformance test plan | |
| Road vehicles \x96 Clock extension peripheral interface (CXPI) \x96 Part 6: Transport and network layer conformance test plan | |
| Road vehicles \x96 Clock extension peripheral interface (CXPI) \x96 Part 7: Data link and physical layer conformance test plan | |
| Road vehicles \x96 Degrees of protection (IP code) \x96 Protection of electrical equipment against foreign objects, water and access | |
| Road vehicles \x96 Dimethyl Ether (DME) refuelling connector | |
| Road vehicles \x96 Durability test method for starter motor for stop and start system | |
| Road Vehicles \x96 Extended vehicle (ExVe) methodology \x96 Part 1: General information | |
| Road Vehicles \x96 Extended vehicle (ExVe) methodology \x96 Part 2: Methodology for designing the extended vehicle | |
| Road vehicles \x96 Extended vehicle (ExVe) web services \x96 Part 1: Content | |
| Road vehicles \x96 Extended vehicle (ExVe) web services \x96 Part 2: Access | |
| Road vehicles \x96 Extended vehicle (ExVe) web services \x96 Part 3: Security | |
| Road vehicles \x96 Fuse-links with axial terminals for use in 48V networks \x96 Types SF36-70V, SF51-70V and SF56-70V | |
| Road vehicles \x96 In-vehicle Ethernet \x96 Part 10: Transport layer and network layer conformance test plans | |
| Road vehicles \x96 In-vehicle Ethernet \x96 Part 11: Application layer to session layer conformance test plans | |
| Road vehicles \x96 In-vehicle Ethernet \x96 Part 1: General information and definitions | |
| Road vehicles \x96 In-vehicle Ethernet \x96 Part 2: Common physical entity requirements | |
| Road vehicles \x96 In-vehicle Ethernet \x96 Part 3: Optical 1-Gbit/s physical entity requirements and conformance test plan | |
| Road vehicles \x96 In-vehicle Ethernet \x96 Part 4: General requirements and test methods of optical gigabit Ethernet components | |
| Road vehicles \x96 In-vehicle Ethernet \x96 Part 5: Optical 1-Gbit/s physical layer system requirements and test plans | |
| Road vehicles \x96 In-vehicle Ethernet \x96 Part 6: Electrical 100-Mbit/s physical entity requirements and conformance test plan | |
| Road vehicles \x96 In-vehicle Ethernet \x96 Part 8: Electrical 100-Mbit/s Ethernet transmission media, components and tests | |
| Road vehicles \x96 Information for remote diagnostic support \x96 General requirements, definitions and use cases \x96 Amendment 1 | |
| Road vehicles \x96 Information for remote diagnostic support \x96 General requirements, definitions and use cases | |
| Road vehicles \x96 Test methods and performance requirements for voltage class B connectors | |
| Road vehicles \x96 Vehicle interface for electronic Periodic Technical Inspection (ePTI) \x96 Part 1: Application and communication requirements | |
| Road vehicles \x96 Vehicle interface for electronic Periodic Technical Inspection (ePTI) \x96 Part 2: Application and communication requirements conformance test plan | |
| Road vehicles \x96 Vehicle interface for electronic Periodic Technical Inspection (ePTI) \x96 Part 3: Data definitions | |
| Rolling bearings \x96 Load ratings for hybrid bearings with rolling elements made of ceramic \x96 Part 1: Dynamic load ratings | |
| Rolling bearings \x96 Load ratings for hybrid bearings with rolling elements made of ceramic \x96 Part 2: Static load ratings | |
| Rolling bearings \x96 Noise testing of rolling bearing greases \x96 Part 2: Test and evaluation method BQ+ | |
| Rolling bearings \x96 Noise testing of rolling bearing greases \x96 Part 4: Test and evaluation method NQ | |
| Rolling bearings \x96 Thrust bearings \x96 Geometrical product specifications (GPS) and tolerance values | |
| Safety information for the content of piping systems and tanks \x96 Part 1: Piping systems | |
| Safety information for the content of piping systems and tanks \x96 Part 2: Tanks | |
| Safety of machinery \x96 Instruction handbook \x96 General drafting principles | |
| Ships and marine technology - Fire resistance of metallic pipe components with resilient and elastomeric seals - Requirements imposed on the test bench | |
| Ships and marine technology - Fire resistance of metallic pipe components with resilient and elastomeric seals - Test methods | |
| Ships and marine technology - Maritime port facility security assessments and security plan development | |
| Ships and marine technology \x96 Ball valves for use in low temperature applications \x96 Design and testing requirements | |
| Ships and marine technology \x96 Butterfly valves for use in low temperature applications \x96 Design and testing requirements | |
| Ships and marine technology \x96 Cathodic protection of ships | |
| Ships and marine technology \x96 Check valves for use in low temperature applications \x96 Design and testing requirements \x96 Amendment 1 | |
| Ships and marine technology \x96 Check valves for use in low temperature applications \x96 Design and testing requirements | |
| Ships and marine technology \x96 Cutter suction dredger supervisory and control systems | |
| Ships and marine technology \x96 Determination of the shaft power of ship propulsion systems by measuring the shaft distorsion \x96 Part 2: Optical reflection method | |
| Ships and marine technology \x96 Determination of the shaft power of ship propulsion systems by measuring the shaft distorsion \x96 Part 3: Elastic vibration method | |
| Ships and marine technology \x96 Electric rudder angle indicators | |
| Ships and marine technology \x96 Grab dredger supervisory and control systems | |
| Ships and marine technology \x96 Guidelines on vibration isolation design methods for shipboard auxiliary machinery | |
| Ships and marine technology \x96 Hopper dredger supervisory and control systems | |
| Ships and marine technology \x96 Life-saving appliances and arrangements \x96 Means of recovery of persons | |
| Ships and marine technology \x96 Major components of emergency towing arrangements | |
| Ships and marine technology \x96 Marine cranes \x96 Manufacturing requirements | |
| Ships and marine technology \x96 Marine cranes \x96 Noise limits and measuring method | |
| Ships and marine technology \x96 Marine cranes \x96 Operation and maintenance requirements | |
| Ships and marine technology \x96 Marine environment protection \x96 Management and handling of shipboard garbage \x96 Amendment 1: Updates to classification of garbage | |
| Ships and marine technology \x96 Marine environment protection \x96 Management and handling of shipboard garbage | |
| Ships and marine technology \x96 Marine environment protection \x96 Specifications on design and selection of sorbents | |
| Ships and marine technology \x96 Marine environment protection: performance testing of oil skimmers \x96 Part 1: Moving water conditions | |
| Ships and marine technology \x96 Marine environment protection: performance testing of oil skimmers \x96 Part 2: Static water conditions | |
| Ships and marine technology \x96 Marine environment protection: performance testing of oil skimmers \x96 Part 3: High viscosity oil | |
| Ships and marine technology \x96 Marine evacuation systems \x96 Testing under conditions of icing | |
| Ships and marine technology \x96 Model test method for propeller cavitation noise evaluation in ship design \x96 Part 1: Source level estimation | |
| Ships and marine technology \x96 Model test method for propeller cavitation noise evaluation in ship design \x96 Part 2: Noise source localization | |
| Ships and marine technology \x96 Navigation and ship operations \x96 Electronic inclinometers | |
| Ships and marine technology \x96 Rate of turn indicators | |
| Ships and marine technology \x96 Servicing of immersion suits, anti-exposure suits and constant wear suits | |
| Ships and marine technology \x96 Shipboard data servers to share field data at sea | |
| Ships and marine technology \x96 Specification for bunkering of liquefied natural gas fuelled vessels | |
| Ships and marine technology \x96 Specifications for gas detectors intended for use on board ships \x96 Part 1: Portable gas detectors for atmosphere testing of enclosed spaces | |
| Ships and marine technology \x96 Standard data for shipboard machinery and equipment | |
| Ships and marine technology \x96 Systems for the detection of persons while going overboard from ships (man overboard detection) | |
| Ships and marine technology \x96 Thermally toughened safety glass panes for windows and side scuttles | |
| Simultaneous interpreting \x96 Equipment \x96 Requirements | |
| Soil quality \x96 Conceptual site models for potentially contaminated sites | |
| Soil quality \x96 Determination of perchlorate in soil using ion chromatography | |
| Soil Quality \x96 Guidance on methods for measuring greenhouse gases (CO2, N2O, CH4) and ammonia (NH3) fluxes between soils and the atmosphere | |
| Soil quality \x96 Guideline for the screening of soil polluted with toxic elements using soil magnetometry | |
| Soil quality \x96 Identification of ecotoxicological test species by DNA barcoding | |
| Soil quality \x96 Inhibition of reproduction of the soil mite (Hypoaspis aculeifer) by soil contaminants | |
| Soil quality \x96 Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like materials \x96 Part 1: Batch test using a liquid to solid ratio of 2 l/kg... | |
| Soil quality \x96 Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like materials \x96 Part 2: Batch test using a liquid to solid ratio of 10 l/kg... | |
| Soil quality \x96 Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like materials \x96 Part 3: Up-flow percolation test | |
| Soil quality \x96 Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like materials \x96 Part 4: Influence of pH on leaching with initial acid/base addition | |
| Soil quality \x96 Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like materials \x96 Part 5: Batch test with forced aerobic or anaerobic conditions | |
| Soil quality \x96 Measurement of enzyme activity patterns in soil samples using colorimetric substrates in micro-well plates | |
| Soil quality \x96 Screening method for water content \x96 Determination by refractometry | |
| Solid biofuels \x96 Determination of ash melting behaviour | |
| Solid biofuels \x96 Determination of off-gassing and oxygen depletion characteristics \x96 Part 2: Operational method for screening of carbon monoxide off-gassing | |
| Solid biofuels \x96 Determination of self-heating of pelletized biofuels \x96 Part 1: Isothermal calorimetry | |
| Solid biofuels \x96 Safe handling and storage of solid biofuel pellets in commercial and industrial applications | |
| Spherical plain bearings \x96 Method for the calculation of static and dynamic load ratings | |
| Stationary source emissions \x96 Determination of greenhouse gas emissions in energy-intensive industries \x96 Part 1: General aspects | |
| Stationary source emissions \x96 Determination of greenhouse gas emissions in energy-intensive industries \x96 Part 4: Aluminium industry | |
| Stationary source emissions \x96 Determination of greenhouse gas emissions in energy-intensive industries \x96 Part 6: Ferroalloys and silicon industry | |
| Stationary source emissions \x96 Determination of the mass concentration of individual volatile organic compounds (VOCs) in waste gases from non-combustion processes | |
| Stationary source emissions \x96 Quality assurance of automated measuring systems | |
| Stationary training equipment \x96 Part 2: Strength training equipment, additional specific safety requirements and test methods | |
| Stationary training equipment \x96 Part 6: Treadmills, additional specific safety requirements and test methods | |
| Stationary training equipment \x96 Part 7: Rowing equipment, additional specific safety requirements and test methods | |
| Sterile drainage catheters and accessory devices for single use (ISO 20697:2018) | |
| Sterile urethral catheters for single use (ISO 20696:2018) | |
| Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices | |
| Submersibles \x96 Hydrostatic pressure test \x96 Pressure hull and buoyancy materials | |
| Surface chemical analysis \x96 Sample handling, preparation and mounting \x96 Part 2: Documenting and reporting the preparation and mounting of specimens for analysis | |
| Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices \x96 Part 1: Broth micro-dilution reference method for testing the in vitro activity of antimicrobial agents... | |
| Sustainability in buildings and civil engineering works \x96 Design for disassembly and adaptability \x96 Principles, requirements and guidance | |
| Sustainable procurement \x96 Guidance | |
| Textile fibres \x96 Determination of linear density \x96 Gravimetric method and vibroscope method | |
| Textile glass \x96 Yarns \x96 Designation | |
| Textiles \x96 Determination of antibacterial activity of textile products | |
| Textiles \x96 Determination of stable nitrogen isotope ratio in cotton fibres | |
| Textiles \x96 Determination of the elasticity of fabrics \x96 Part 1: Strip tests (ISO 20932-1:2018) | |
| Textiles \x96 Determination of the elasticity of fabrics \x96 Part 1: Strip tests \x96 Amendment 1 | |
| Textiles \x96 Determination of the elasticity of fabrics \x96 Part 2: Multiaxial tests | |
| Textiles \x96 Determination of the elasticity of fabrics \x96 Part 3: Narrow fabrics | |
| Textiles \x96 Man-made fibres \x96 Generic names | |
| Textiles \x96 Method for determination of alkylphenols (AP) | |
| Textiles \x96 Qualitative and quantitative analysis of some bast fibres (flax, hemp, ramie) and their blends \x96 Part 1: Fibre identification using microscopy methods | |
| Textiles \x96 Qualitative and quantitative proteomic analysis of some animal hair fibres \x96 Part 1: Peptide detection using LC-ESI-MS with protein reduction (ISO 20418-1:2018) | |
| Textiles \x96 Qualitative and quantitative proteomic analysis of some animal hair fibres \x96 Part 2: Peptide detection using MALDI-TOF MS | |
| Textiles \x96 Qualitative and quantitative proteomic analysis of some animal hair fibres \x96 Part 3: Peptide detection using LC-MS without protein reduction | |
| Textiles \x96 Quantitative microscopical analysis \x96 General principles of testing | |
| Thermal containers \x96 Safety standard for refrigerating systems using flammable refrigerants \x96 Requirements for design and operation | |
| Thermal insulation for building equipment and industrial installations \x96 Aluminosilicate wool products \x96 Specification | |
| Thermal spraying \x96 Zinc, aluminium and their alloys \x96 Part 1: Design considerations and quality requirements for corrosion protection systems | |
| Timber structures \x96 Glued laminated timber \x96 Face and edge joint cleavage test | |
| Tobacco and tobacco products \x96 Determination of ammonia \x96 Method using ion chromatographic analysis | |
| Tobacco and tobacco products \x96 Determination of the width of the strands of cut tobacco \x96 Amendment 1 | |
| Tobacco and tobacco products \x96 Determination of the width of the strands of cut tobacco | |
| Tourism and related services \x96 Bareboat charter \x96 Minimum service and equipment requirements | |
| Tourism and related services \x96 Sustainability management system for accommodation establishments \x96 Requirements | |
| Tourism and related services \x96 Yacht harbours \x96 Essential requirements for luxury harbours | |
| Toxicity testing of fire effluents - Guidance for analysis of gases and vapours in fire effluents using FTIR gas analysis | |
| Tractors and machinery for agriculture and forestry \x96 Camera interface between tractor and implement \x96 Part 1: Analogue camera interface | |
| Tractors and machinery for agriculture and forestry \x96 Speed Identification Sign (SIS) | |
| Traditional Chinese medicine \x96 Electric heating moxibustion equipment | |
| Traditional Chinese medicine \x96 Gua Sha instruments | |
| Traditional Chinese medicine \x96 Test method of single-use acupuncture needles for electrical stimulation | |
| Translation, interpreting and related technology \x96 Vocabulary | |
| Unmanned aircraft systems \x96 Part 2: UAS components | |
| Unmanned aircraft systems \x96 Part 3: Operational procedures | |
| Unmanned aircraft systems \x96 Part 4: Vocabulary | |
| Vapour products \x96 Routine analytical vaping machine \x96 Definitions and standard conditions \x96 Amendment 1: Correction of puff profile requirements | |
| Vapour products \x96 Routine analytical vaping machine \x96 Definitions and standard conditions | |
| Vegetable fats and oils \x96 Determination of aflatoxins B1, B2, G1 and G2 by immunoaffinity column clean-up and high-performance liquid chromatography | |
| Walking trolleys \x96 Requirements and test methods | |
| Water quality - Determination of microcystins - Method using solid phase extraction (SPE) and high performance liquid chromatography (HPLC) with ultraviolet (UV) detection | |
| Water quality - Determination of the acute toxicity to the freshwater rotifer Brachionus calyciflorus | |
| Water quality - Determination of the acute toxicity to the marine rotifer Brachionus plicatilis | |
| Water quality - Kinetic determination of the inhibitory effects of sediment, other solids and coloured samples on the light emission of Vibrio fischeri (kinetic luminescent bacteria test) | |
| Water quality \x96 Determination of acute toxicity of water samples and chemicals to a fish gill cell line (RTgill-W1) | |
| Water quality \x96 Determination of available weak and dissociable (WAD) cyanide \x96 Part 1: Method using ligand exchange, flow injection analysis (FIA), gas-diffusion and amperometric detection | |
| Water quality \x96 Determination of cyclic volatile methylsiloxanes in water \x96 Part 1: Method using purge and trap with gas chromatography-mass spectrometry (GC-MS) | |
| Water quality \x96 Determination of cyclic volatile methylsiloxanes in water \x96 Part 2: Method using liquid-liquid extraction with gas chromatography-mass spectrometry (GC-MS) | |
| Water quality \x96 Determination of selected highly volatile organic compounds in water \x96 Method using gas chromatography and mass spectrometry by static headspace technique (HS-GC-MS) | |
| Water quality \x96 Determination of total organic carbon (TOC), dissolved organic carbon (DOC), total bound nitrogen (TNb) and dissolved bound nitrogen (DNb) after high temperature catalytic oxidative combustion | |
| Water quality \x96 Multi-compound class methods \x96 Part 1: Criteria for the identification of target compounds by gas and liquid chromatography and mass spectrometry | |
| Water quality \x96 Multi-compound class methods \x96 Part 2: Criteria for the quantitative determination of organic substances using a multi-compound class analytical method | |
| Water reuse \x96 Vocabulary | |
| Water safety signs and beach safety flags \x96 Part 3: Guidance for use |
| << Prev | Next >> |