Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
350
400
450
500
550
600
650
660
670
680
690
700
707
708
709
710
711
712
713
714
715
716
717
718
719
720
730
740
750
760
770
800
850
900
950
1000
1050
1500
1620
| Product Name | Notes |
|---|---|
| Accessible design \x96 Consideration and assistive products for accessible meeting | |
| Acoustics -- Characterization of sources of structure-borne sound and vibration -- Indirect measurement of blocked forces | |
| Acoustics -- Screens, furniture and single objects intended for interior use -- Rating of sound absorption and sound reduction of elements based on laboratory measurements | |
| Acoustics \x96 Acoustic classification of dwellings | |
| Acoustics \x96 Acoustic insulation for pipes, valves and flanges | |
| Acoustics \x96 Description, measurement and assessment of environmental noise \x96 Part 2: Determination of sound pressure levels | |
| Acoustics \x96 Experimental method for transposition of dynamic forces generated by an active component from a test bench to a receiving structure | |
| Acoustics \x96 Hearing aid fitting management (HAFM) | |
| Acoustics \x96 Measurement of sound pressure level from service equipment or activities in buildings \x96 Engineering method | |
| Acoustics \x96 Noise from shooting ranges \x96 Part 4: Calculation of projectile sound | |
| Adhesives \x96 Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures | |
| Adventure tourism -- Safety management systems -- Requirements | |
| Aircraft \x96 Connections for starting engines by air | |
| Anaesthetic and respiratory equipment \x96 Passive humidifiers | |
| Animal feeding stuffs \x96 Enzymatic determination of total starch content \x96 Part 2: Method by enzymatic determination with a hexokinase system and potassium hydroxide dispersion | |
| Animal feeding stuffs \x96 Vocabulary | |
| Application of statistical and related methods to new technology and product development process -- Part 1: General principles and perspectives of quality function deployment (QFD) | |
| Assessment of the effectiveness of cathodic protection based on coupon measurements | |
| Assistive products for tissue integrity when lying down \x96 Part 1: General requirements | |
| Automation systems and integration -- Assessment on convergence of informatization and industrialization for industrial enterprises -- Part 1: Framework and reference model | |
| Automation systems and integration -- Assessment on convergence of informatization and industrialization for industrial enterprises -- Part 2: Maturity model and evaluation methodology | |
| Automation systems and integration -- Evaluating energy efficiency and other factors of manufacturing systems that influence the environment -- Part 1: Overview and general principles | |
| Automation systems and integration -- Evaluating energy efficiency and other factors of manufacturing systems that influence the environment -- Part 2: Environmental performance evaluation process | |
| Automation systems and integration -- Evaluating energy efficiency and other factors of manufacturing systems that influence the environment -- Part 3: Environmental performance evaluation data aggregation process | |
| Automation systems and integration -- Interoperability of capability units for manufacturing application solutions -- Part 2: Capability templates and software unit cataloguing | |
| Automation systems and integration -- Interoperability of capability units for manufacturing application solutions -- Part 4: Capability unit assessment for the manufacturing application requirements | |
| Automation systems and integration \x96 Evaluating energy efficiency and other factors of manufacturing systems that influence the environment \x96 Part 5: Environmental performance evaluation data | |
| Ball valves for thermoplastics piping systems for hot and cold water installations under pressure \x96 Types, dimensions and requirements | |
| Bamboo structures \x96 Determination of physical and mechanical properties of bamboo culms \x96 Test methods | |
| Banking and related financial services -- Key wrap using AES | |
| Bidis -- Determination of total and nicotine-free dry particulate matter using a linear routine analytical smoking machine | |
| Biocompatibility evaluation of breathing gas pathways in healthcare applications -- Part 1: Evaluation and testing within a risk management process | |
| Biocompatibility evaluation of breathing gas pathways in healthcare applications -- Part 2: Tests for emissions of particulate matter | |
| Biocompatibility evaluation of breathing gas pathways in healthcare applications -- Part 3: Tests for emissions of volatile organic compounds (VOCs) | |
| Biocompatibility evaluation of breathing gas pathways in healthcare applications -- Part 4: Tests for leachables in condensate | |
| Biodiversity \x96 Process for designing and implementing biodiversity net gain in development projects | |
| Biogas \x96 Biogas production, conditioning, upgrading and utilization \x96 Terms, definitions and classification scheme | |
| Biotechnology -- Biobanking -- General requirements for biobanking | |
| Biotechnology -- Biobanking -- General requirements for the validation and verification of processing methods for biological material in biobanks | |
| Biotechnology -- Cell counting -- Part 1: General guidance on cell counting methods | |
| Biotechnology -- Cell counting -- Part 2: Experimental design and statistical analysis to quantify counting method performance | |
| Biotechnology -- General requirements for transportation of cells for therapeutic use | |
| Biotechnology -- Requirements for evaluating the performance of quantification methods for nucleic acid target sequences -- qPCR and dPCR | |
| Brazing -- Quality requirements for brazing of metallic materials | |
| Building automation and control systems (BACS) \x96 Part 4: Control applications | |
| Building automation and control systems (BACS) \x96 Part 5: Data communication protocol | |
| Building automation and control systems (BACS) \x96 Part 6: Data communication conformance testing | |
| Building environment design -- Design, test methods and control of hydronic radiant heating and cooling panel systems -- Part 1: Vocabulary, symbols, technical specifications and requirements | |
| Building environment design -- Design, test methods and control of hydronic radiant heating and cooling panel systems -- Part 2: Determination of heating and cooling capacity of ceiling mounted radiant... | |
| Building environment design -- Design, test methods and control of hydronic radiant heating and cooling panel systems -- Part 3: Design of ceiling mounted radiant panels | |
| Building environment design -- Design, test methods and control of hydronic radiant heating and cooling panel systems -- Part 4: Control of ceiling mounted radiant heating and cooling panels | |
| Building environment design -- Indoor environment -- Daylight opening design for sustainability principles in visual environment | |
| Building environment design \x96 Indoor environment \x96 General principles | |
| Categorization and classification of civil unmanned aircraft systems | |
| Cigarettes -- Determination of benzo[a]pyrene in cigarette mainstream smoke using GC/MS -- Part 1: Method using methanol as extraction solvent | |
| Cigarettes -- Determination of benzo[a]pyrene in cigarette mainstream smoke using GC/MS -- Part 2: Method using cyclohexane as extraction solvent | |
| Cigarettes \x96 Determination of selected carbonyls in the mainstream smoke of cigarettes \x96 Method using high performance liquid chromatography | |
| Cigarettes \x96 Determination of selected volatile organic compounds in the mainstream smoke of cigarettes \x96 Method using GC/MS | |
| Cigarettes \x96 Determination of tobacco specific nitrosamines in mainstream cigarette smoke \x96 Method using LC-MS/MS | |
| Clothing -- Standard method of garment measurement | |
| Clothing and equipment for protection against heat -- Test method for convective heat resistance using a hot air circulating oven | |
| Clothing for protection against heat and flame \x96 Determination of heat transmission on exposure to both flame and radiant heat | |
| Coal - Proximate analysis | |
| Condition monitoring and diagnostics of machine systems \x96 Requirements for certification of personnel \x96 Part 1: Sector specific requirements for certification bodies and the certification process | |
| Condition monitoring and diagnostics of machines \x96 Requirements for qualification and assessment of personnel \x96 Part 6: Acoustic emission | |
| Condition monitoring and diagnostics of machines \x96 Requirements for training and certification of personnel \x96 Part 3: Requirements for training bodies and the training process | |
| Condition monitoring and diagnostics of power transformers | |
| Conference systems -- Equipment -- Requirements | |
| Conveyor belts \x96 Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining | |
| Corrosion of metals and alloys -- Determination of AC corrosion -- Protection criteria | |
| Corrosion of metals and alloys -- Determination of the corrosion rates of embedded steel reinforcement in concrete exposed to simulated marine environments | |
| Corrosion of metals and alloys -- Electrochemical measurement of ion transfer resistance to characterize the protective rust layer on weathering steel | |
| Cranes and hoists \x96 Selection of wire ropes, drums and sheaves | |
| Cryogenic vessels \x96 Static vacuum-insulated vessels \x96 Part 1: Design, fabrication, inspection and tests | |
| Cylindrical involute gears and gear pairs \x96 Part 2: Calculation and measurement of tooth thickness and backlash | |
| Data structures for electronic product catalogues for building services \x96 Part 4: Data dictionary structures for product catalogues | |
| Data structures for electronic product catalogues for building services \x96 Part 5: Product catalogue exchange format | |
| Dentistry \x96 Fluoride varnishes | |
| Dentistry \x96 Interoperability of CAD/CAM systems | |
| Dentistry \x96 Materials for dental instruments \x96 Part 2: Polymers | |
| Dentistry \x96 Oral care products \x96 Oral rinses | |
| Dentistry \x96 Physical properties of powered toothbrushes | |
| Dentistry \x96 Sinus membrane elevator | |
| Design of concrete-filled steel tubular (CFST) hybrid structures | |
| Determination of particle density by sedimentation methods -- Part 1: Isopycnic interpolation approach | |
| Determination of particle density by sedimentation methods -- Part 2: Multi-velocity approach | |
| Determination of particle size distribution \x96 Single particle light interaction methods \x96 Part 4: Light scattering airborne particle counter for clean spaces | |
| Determination of the resistance to hydrocarbon pool fires of fire protection materials and systems for pressure vessels | |
| Document management -- Trusted storage sub-system (TSS) functional and technical requirements | |
| Document management -- XML Forms Data Format -- Part 1: Use of ISO 32000-2 (XFDF 3.0) | |
| Document management \x96 AFP interchange for PDF | |
| Doors, windows and curtain walling -- Curtain walling -- Vocabulary | |
| Dry-cured ham \x96 Specification | |
| Earth-moving machinery \x96 Functional safety \x96 Part 2: Design and evaluation of hardware and architecture requirements for safety-related parts of the control system | |
| Electrically propelled road vehicles -- Electrical specifications and tests for voltage class B systems and components -- Part 2: Electrical tests for components | |
| Electrically propelled road vehicles -- Magnetic field wireless power transfer -- Safety and interoperability requirements | |
| Electronic record books for ships \x96 Technical specifications and operational requirements | |
| Endoscopes -- Trocar pins, trocar sleeves and endotherapy devices for use with trocar sleeves | |
| Energy performance of buildings -- Indoor environmental Quality -- Part 1: Indoor environmental input parameters for the design and assessment of energy performance of buildings | |
| Energy performance of buildings -- Schedule and condition of building, zone and space usage for energy calculation -- Part 2: Residential buildings | |
| Energy performance of fenestration systems for residential buildings - Calculation procedure | |
| Enterprise modelling and architecture \x96 Requirements for enterprise-reference architectures and methodologies | |
| Environmental solid matrices \x96 Determination of elements using inductively coupled plasma mass spectrometry (ICP-MS) | |
| Equipment for crop protection \x96 Knapsack sprayers \x96 Part 1: Safety and environmental requirements | |
| Equipment for crop protection \x96 Knapsack sprayers \x96 Part 2: Test methods | |
| Event sustainability management systems - Requirements with guidance for use | |
| Exchange of information on rare earth elements in industrial wastes and end-of-life cycled products | |
| Fans \x96 Laboratory test methods for air circulating fans | |
| Fine bubble technology -- Storage and transportation of ultrafine bubble dispersion in water | |
| Fine-cut tobacco and smoking articles made from it \x96 Methods of sampling, conditioning and analysis \x96 Part 3: Determination of total particulate matter of smoking articles using a routine analytical... | |
| Foodstuffs -- Determination of water activity | |
| Footwear \x96 Critical substances potentially present in footwear and footwear components \x96 Determination of organotin compounds in footwear materials | |
| Footwear \x96 Vocabulary | |
| Footwear and footwear components \x96 Test method to assess antibacterial activity | |
| Forensic sciences \x96 Part 2: Recognition, recording, collecting, transport and storage of material | |
| Furniture -- Beds -- Test methods for the determination of stability, strength and durability | |
| Furniture \x96 Assessment of the ignitability of mattresses and upholstered bed bases \x96 Part 1: Ignition source: smouldering cigarette | |
| Furniture \x96 Assessment of the ignitability of mattresses and upholstered bed bases \x96 Part 2: Ignition source: match flame equivalent | |
| Furniture \x96 Tables \x96 Test methods for the determination of stability, strength and durability | |
| Gas cylinders -- Refillable permanently mounted composite tubes for transportation | |
| Gas cylinders \x96 Flexible hoses assemblies \x96 Specification and testing | |
| Gas turbine combined cycle power plants \x96 Thermal performance tests | |
| Gaseous Hydrogen \x96 Fuel system components for hydrogen fuelled vehicles | |
| Gaseous hydrogen \x96 Fueling stations \x96 Part 3: Valves | |
| Gaseous hydrogen \x96 Fuelling stations \x96 Part 1: General requirements | |
| Gaseous hydrogen \x96 Fuelling stations \x96 Part 2: Dispensers and dispensing systems | |
| Gaseous hydrogen \x96 Fuelling stations \x96 Part 5: Dispenser hoses and hose assemblies | |
| Gaseous hydrogen \x96 Fuelling stations \x96 Part 7: Rubber O-rings | |
| Gaseous hydrogen \x96 Fuelling stations \x96 Part 8: Fuel quality control | |
| Gaseous hydrogen \x96 Thermally activated pressure relief devices for compressed hydrogen vehicle fuel containers | |
| Generation and analysis of toxic gases in fire \x96 Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires | |
| Geographic information -- Preservation of digital data and metadata -- Part 1: Fundamentals | |
| Geographic information \x96 General feature model and rules for application schema | |
| Geographic information \x96 Land Administration Domain Model (LADM) \x96 Part 5: Spatial plan information | |
| Geographic information \x96 Schema for coverage geometry and functions \x96 Part 2: Coverage implementation schema | |
| Geometrical product specifications (GPS) -- Filtration -- Part 28: Profile filters: End effects | |
| Geometrical product specifications (GPS) -- Filtration -- Part 31: Robust profile filters: Gaussian regression filters | |
| Geotechnical investigation and testing \x96 Laboratory testing of rock \x96 Part 1: Determination of water content | |
| Glass in building -- Electrochromic glazings -- Accelerated ageing test and requirements | |
| Glass in building -- Heat soaked tempered soda lime silicate safety glass | |
| Glass in building -- Laminated solar photovoltaic glass for use in buildings | |
| Graphic technology -- Test method for the determination of the binding strength for perfect-bound products -- Page-pull test working upwards | |
| Graphic technology \x96 Use of PDF to associate processing steps and content data \x96 Part 1: Processing steps for packaging and labels | |
| Graphical symbols \x96 Safety colours and safety signs \x96 Natural disaster safety way guidance system | |
| Guidance for assessment and evaluation of changes to drug delivery systems | |
| Guidelines for treated wastewater use for irrigation projects \x96 Part 1: The basis of a reuse project for irrigation | |
| Guidelines for treated wastewater use for irrigation projects \x96 Part 2: Development of the project | |
| Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients -- Part 2: Criteria for ingredients and products | |
| Health informatics -- Public key infrastructure -- Part 1: Overview of digital certificate services | |
| Health informatics -- Public key infrastructure -- Part 3: Policy management of certification authority | |
| Health informatics -- Public key infrastructure -- Part 5: Authentication using Healthcare PKI credentials | |
| Health informatics \x96 Categorial structures for representation of acupuncture \x96 Part 2: Needling | |
| Health informatics \x96 Medical waveform format \x96 Part 1: Encoding rules | |
| Health informatics \x96 Patient healthcard data \x96 Part 7: Medication data | |
| Health informatics \x96 Terminological resources \x96 Part 1: Characteristics | |
| Health informatics \x96 Workforce roles and capabilities for terminology and terminology services in healthcare (term workforce) | |
| Hydrogen generators using water electrolysis \x96 Industrial, commercial, and residential applications | |
| Hydrogen generators using water electrolysis process - Part 1: Industrial and commercial applications | |
| Imaging materials -- Colour images -- Determination of water resistance of printed colour images | |
| Imaging materials -- Colour reflection prints -- Test method for ozone gas fading stability | |
| Imaging materials -- Photographic reflection prints -- Methods for measuring indoor light stability | |
| Imaging materials -- Processed colour photographs -- Methods for measuring thermal stability | |
| Imaging materials \x96 Photo books \x96 Test methods for permanence and durability | |
| Imaging materials \x96 Photographic activity test for enclosure materials \x96 Processed silver-gelatin and dye-gelatin prints | |
| Imaging materials \x96 Reflection colour photographic prints \x96 Method for testing humidity fastness | |
| Imaging materials \x96 Reflection colour photographic prints \x96 Method for testing stability under low humidity conditions | |
| In vitro diagnostic medical devices \x96 Clinical performance studies using specimens from human subjects \x96 Good study practice | |
| In vitro diagnostic medical devices \x96 Multiplex molecular testing for nucleic acids \x96 Part 2: Validation and verification | |
| In vitro diagnostic medical devices \x96 Multiplex molecular testing for nucleic acids \x96 Part 3: Interpretation and reports | |
| In vitro diagnostic test systems -- Nucleic acid amplification-based examination procedures for detection and identification of microbial pathogens -- Part 2: Laboratory quality practice guide | |
| Indoor air -- Part 28: Determination of odour emissions from building products using test chambers | |
| Indoor air -- Part 36: Standard method for assessing the reduction rate of culturable airborne bacteria by air purifiers using a test chamber | |
| Indoor air -- Part 40: Indoor air quality management system | |
| Indoor air \x96 Part 22: Detection and quantification of fungal biomass by fungal \xdf-N-acetylhexosam inidase enzyme activity | |
| Indoor air \x96 Part 23: Performance test for evaluating the reduction of formaldehyde and other carbonyl compounds concentrations by sorptive building materials | |
| Indoor air \x96 Part 24: Performance test for evaluating the reduction of volatile organic compound concentrations by sorptive building materials | |
| Indoor air \x96 Part 34: Strategies for the measurement of airborne particles | |
| Indoor air \x96 Part 6: Determination of organic compounds (VVOC, VOC, SVOC) in indoor and test chamber air by active sampling on sorbent tubes, thermal desorption and gas chromatography using... | |
| Information and documentation -- International library item identifier(ILII) | |
| Information and documentation -- Quality assessment for national libraries | |
| Information and documentation \x96 Codes for the representation of names of scripts | |
| Information and documentation \x96 International Standard Audiovisual Number (ISAN) \x96 Part 1: Audiovisual work identifier | |
| Information and documentation \x96 International Standard Audiovisual Number (ISAN) \x96 Part 2: Version identifier | |
| Information and documentation \x96 International Standard Musical Work Code (ISWC) | |
| Intelligent transport systems \x96 Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV) \x96 Part 21: Monitoring of regulated vehicles using roadside sensors and data collected from the... | |
| Intelligent transport systems \x96 Information for emergency service support via personal ITS station \x96 General requirements and technical definition | |
| Interpreting services \x96 General requirements and recommendations | |
| Interpreting services \x96 Healthcare interpreting \x96 Requirements and recommendations | |
| Interpreting services \x96 Legal interpreting \x96 Requirements | |
| ISO/FDIS 17828 | |
| ISO/FDIS 17831-1 | |
| Language coding \x96 A framework for language varieties \x96 Part 1: Vocabulary | |
| Language coding \x96 A framework for language varieties \x96 Part 3: Application of the framework | |
| Leather -- Determination of ethoxylated alkylphenols -- Part 2: Indirect method | |
| Legal translation \x96 Requirements | |
| Life cycle analysis and recycling of ductile iron pipes for water applications | |
| Life cycle inventory calculation methodology for steel products | |
| Lubricants \x96 Determination of the Coefficient of Friction of Synchronizer Lubricated by Manual Transmission Fluids (MTF) \x96 High-Frequency, Linear-Oscillation (SRV) Test Machine | |
| Measurement of fluid flow in closed conduits -- Ultrasonic meters for gas -- Part 1: Meters for custody transfer and allocation measurement | |
| Measurement of fluid flow in closed conduits \x96 Guidance for the use of electromagnetic flowmeters for conductive liquids | |
| Measurement of radioactivity \x96 Gamma emitting radionuclides \x96 Rapid screening method using scintillation detector gamma-ray spectrometry | |
| Mechanical vibration \x96 Measurement and evaluation of machine vibration \x96 Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds... | |
| Mechanical vibration \x96 Measurement and evaluation of machine vibration \x96 Part 5: Machine sets in hydraulic power generating and pump-storage plants | |
| Mechanical vibration \x96 Measurement of vibration on ships \x96 Part 5: Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on passenger and merchant ships | |
| Mechanical vibration, shock and condition monitoring \x96 Vocabulary | |
| Medical devices -- Recognized essential principles of safety and performance of medical devices -- Part 2: General essential principles and additional specific essential principles for all IVD medical devices and... | |
| Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds | |
| Method of evaluating the UV dose to airborne microorganisms transiting in-duct ultraviolet germicidal irradiation devices | |
| Methods for the calibration of vibration and shock transducers -- Part 34: Testing of sensitivity at fixed temperatures | |
| Methods for the calibration of vibration and shock transducers \x96 Part 44: Calibration of field vibration calibrators | |
| Microbeam analysis -- Methods of specimen preparation for analysis of general powders using WDS and EDS | |
| Microbiology of the food chain -- Horizontal method for the enumeration of beta-glucuronidase-p ositive Escherichia coli -- Part 1: Colony-count technique at 44 degrees C using membranes and 5-bromo-4-chloro-3-i ndolyl... | |
| Microbiology of the food chain \x96 Horizontal method for the enumeration of psychrotrophic microorganisms | |
| Milk and milk products -- Determination of the sugar contents -- High performance anion exchange chromatography with pulsed amperometric detection method (HPAEC-PAD) | |
| Mobile elevating work platforms \x96 Design, calculations, safety requirements and test methods | |
| Mobile elevating work platforms \x96 Safety principles, inspection, maintenance and operation | |
| Mobile robots \x96 Vocabulary | |
| Molecular biomarker analysis -- Methods of analysis for the detection and identification of animal species in foods and food products (nucleic acid-based methods) -- General requirements and definitions | |
| Molecular biomarker analysis \x96 DNA barcoding of fish and fish products using defined mitochondrial cytochrome b and cytochrome c oxidase I gene segments | |
| Molecular biomarker analysis \x96 Method for the statistical evaluation of analytical results obtained in testing sub-sampled groups of genetically modified seeds and grains \x96 General requirements and definitions | |
| Molecular in vitro diagnostic examinations -- Specifications for pre-examinations processes for formalin-fixed and paraffin-embedded (FFPE) tissue -- Part 2: Isolated proteins | |
| Molecular in-vitro diagnostic examinations \x96 Specifications for pre-examination processes for formalin-fixed and paraffin-embedded (FFPE) tissue \x96 Part 1: Isolated RNA (ISO/FDIS 20166-1:2018) | |
| Motorcycles \x96 Measurement method for evaporative emissions \x96 Part 2: Permeation test procedure | |
| Nanotechnologies -- In vitro MTS assay for measuring the cytotoxic effect of nanoparticles | |
| Non-destructive testing - Acoustic emission testing (AT) - Leak detection by means of acoustic emission | |
| Non-destructive testing \x96 Image quality of radiographs \x96 Part 3: Minimum image quality values | |
| Non-destructive testing \x96 Radiation methods for computed tomography \x96 Part 2: Principles, equipment and samples | |
| Non-destructive testing \x96 Radiation methods for computed tomography \x96 Part 3: Operation and interpretation | |
| Non-destructive testing \x96 Ultrasonic testing \x96 Sensitivity and range setting | |
| Non-destructive testing \x96 Ultrasonic testing \x96 Technique of testing claddings produced by welding, rolling and explosion | |
| Non-destructive testing \x96 Ultrasonic testing \x96 Testing for discontinuities perpendicular to the surface | |
| Non-destructive testing \x96 Ultrasonic testing \x96 Time-of-flight diffraction technique for detection and sizing of discontinuities | |
| Non-destructive testing \x96 Ultrasonic thickness determination | |
| Non-destructive testing of welds -- Ultrasonic testing -- Use of automated phased array technology for steel components with small wall thickness | |
| Non-destructive testing of welds \x96 General rules for metallic materials | |
| Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) \x96 Information management using building information modelling \x96 Part 6: Health and safety information... | |
| Paints and varnishes -- Determination of image clarity (degree of sharpness of reflected or transmitted image) | |
| Paints and varnishes -- Determination of pH value -- Part 1: pH electrodes with glass membrane | |
| Paints and varnishes -- Determination of pH value -- Part 2: pH electrodes with ISFET technology | |
| Paints and varnishes -- Determination of solvents in water-thinnable coating materials -- Gas-chromatographic method | |
| Paints and varnishes -- Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) | |
| Paints and varnishes -- Electro-deposition coatings -- Part 2: Throwing power | |
| Paints and varnishes -- Electro-deposition coatings -- Part 3: Compatibility of electro-deposition coating materials with a reference oil | |
| Paints and varnishes -- Electro-deposition coatings -- Part 4: Compatibility of electro-deposition coating materials with liquid, paste-like and solid foreign materials | |
| Paints and varnishes -- Electro-deposition coatings -- Part 5: Determination of sieve residue | |
| Paints and varnishes -- Electro-deposition coatings -- Part 6: Entry marks | |
| Paints and varnishes -- Electro-deposition coatings -- Part 8: Electric charge density | |
| Paints and varnishes -- Scratch test using a spring-loaded pen | |
| Paints and varnishes \x96 Coating materials and coating systems for exterior wood \x96 Natural weathering test | |
| Paints and varnishes \x96 Determination of settling | |
| Paints and varnishes \x96 Determination of stone-chip resistance of coatings \x96 Part 4: Mobile multi-impact testing on a small testing area | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 10: Edge protection | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 1: Vocabulary | |
| Paints and varnishes \x96 Wettability \x96 Part 3: Determination of the surface tension of liquids using the pendant drop method | |
| Paper, board and pulps \x96 Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples | |
| Particle size analysis \x97 Dynamic light scattering (DLS) | |
| Performance evaluation protocol for digital fitting systems -- Part 1: Accuracy of virtual human body representation | |
| Performance evaluation protocol for digital fitting systems -- Part 2: Virtual garment | |
| Performance evaluation protocol for digital fitting systems \x96 Part 3: Digital fitting performance \x96 Gap | |
| Petroleum and natural gas industries -- Concrete offshore structures | |
| Petroleum and natural gas industries -- Factory bends, fittings and flanges for pipeline transportation systems -- Part 2: Fittings | |
| Petroleum and natural gas industries -- Modular drilling rigs for offshore fixed platforms | |
| Petroleum and natural gas industries \x96 Induction bends, fittings and flanges for pipeline transportation systems \x96 Part 1: Induction bends | |
| Petroleum and natural gas industries \x96 Induction bends, fittings and flanges for pipeline transportation systems \x96 Part 4: Factory cold bends | |
| Petroleum and natural gas industries \x96 Site-specific assessment of mobile offshore units \x96 Part 3: Floating units | |
| Petroleum, petrochemical and natural gas industries -- Qualification testing and acceptance criteria for protective coating systems under insulation | |
| Petroleum, petrochemicals and natural gas industries -- Internal coating and lining of carbon steel process vessels -- Part 1: Technical requirements | |
| Photography -- Electronic still-picture imaging -- Noise measurements | |
| Photography \x96 Processed photographic colour films and paper prints \x96 Methods for measuring image stability | |
| Plastics -- Evaluation of the adhesion interface performance in plastic-metal assemblies -- Part 6: Accelerated degradation test | |
| Plastics -- Film and sheeting -- Biaxially oriented polypropylene (PP) films | |
| Plastics -- Organic recycling -- Specifications for compostable plastics | |
| Plastics \x96 Assessment of the intrinsic biodegradability of materials exposed to marine inocula under mesophilic aerobic laboratory conditions \x96 Test methods and requirements | |
| Plastics \x96 Carbon and environmental footprint of biobased plastics \x96 Part 2: Material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule | |
| Plastics \x96 Carbon and environmental footprint of biobased plastics \x96 Part 3: Process carbon footprint, requirements and guidelines for quantification | |
| Plastics \x96 Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures \x96... | |
| Plastics pipes and fittings \x96 Butt fusion jointing procedures for polyethylene (PE) piping systems | |
| PPE ensembles for firefighters undertaking hazardous materials response activities -- Part 1: Gas-tight, vapour-protective ensembles for emergency response teams ("type 1") | |
| PPE ensembles for firefighters undertaking specialist rescue activities -- Part 3: Clothing | |
| PPE ensembles for firefighters undertaking specialist rescue activities -- Part 6: Footwear | |
| PPE ensembles for firefighters undertaking specific rescue activities -- Part 5: Helmet | |
| PPE ensembles for firefighters undertaking specific rescue activities \x96 Part 4: Gloves | |
| PPE for firefighters undertaking specific rescue activities -- Part 1: General | |
| Prerequisite programmes on food safety \x96 Part 100: Requirements for the food, feed and packaging supply chain | |
| Prerequisite programmes on food safety \x96 Part 1: Food manufacturing | |
| Prerequisite programmes on food safety \x96 Part 2: Catering | |
| Prerequisite programmes on food safety \x96 Part 4: Food packaging manufacturing | |
| Prerequisite programmes on food safety \x96 Part 5: Transport and storage | |
| Prerequisite programmes on food safety \x96 Part 6: Feed and animal food production | |
| Prerequisite programmes on food safety \x96 Part 7: Retail and wholesale | |
| Processing of health care products -- Information to be provided by the medical device manufacturer for the processing of medical devices -- Part 1: Critical and semi-critical medical devices | |
| Protective clothing - Test methods for clothing providing protection against chemicals - Part 5: Determination of resistance to penetration by a spray of liquid (manikin spray test) | |
| Quality management systems \x96 Guidelines for the application of ISO 9001 in local government | |
| Radiation protection \x96 Monitoring of workers occupationally exposed to a risk of internal contamination with radioactive material | |
| Railway applications -- Calculation of braking performance (stopping, slowing and stationary braking) -- Part 1: General algorithms utilizing mean value calculation | |
| Railway applications -- Calculation of braking performance (stopping, slowing and stationary braking) -- Part 2: General algorithms utilizing step by step calculation | |
| Railway applications -- Recyclability and recoverability calculation method for rolling stock | |
| Railway applications \x96 Concrete sleepers and bearers for track \x96 Part 1: General requirements | |
| Railway applications \x96 Concrete sleepers and bearers for track \x96 Part 2: Prestressed monoblock sleepers | |
| Railway applications \x96 Heating, ventilation and air conditioning systems for rolling stock \x96 Part 3: Energy efficiency | |
| Railway infrastructure -- Rail fastening systems -- Part 2: Test method for longitudinal rail restraint | |
| Railway infrastructure -- Rail fastening systems -- Part 3: Proof load test method for pull-out resistance | |
| Railway infrastructure -- Rail fastening systems -- Part 6: Test method for resistance to severe environmental conditions | |
| Railway infrastructure \x96 Rail fastening systems \x96 Part 7: Test method for clamping force and uplift stiffness | |
| Railway infrastructure \x96 Rail fastening systems \x96 Part 8: Test method for vertical stiffness | |
| Refrigerated hydrocarbon fluids \x96 Dynamic measurement \x96 Requirements and guidelines for the calibration and installation of flowmeters used for liquefied natural gas (LNG) and other refrigerated hydrocarbon fluids | |
| Requirements for the collection and transport of samples for medical laboratory examinations | |
| Resistance welding -- Vocabulary -- Part 1: Spot, projection and seam welding | |
| Respiratory protective devices -- Methods of test and test equipment -- Part 2: Determination of breathing resistance | |
| Respiratory protective devices \x96 Selection, use and maintenance \x96 Part 3: Fit testing procedures | |
| Road construction and maintenance equipment \x96 Paver-finishers \x96 Commercial specifications | |
| Road vehicles -- Automotive cables -- Part 10: Dimensions and requirements for 600 V a.c. or 900 V d.c. and 1 000 V a.c. or 1 500 V d.c. round,... | |
| Road vehicles -- Automotive cables -- Part 2: Test methods | |
| Road vehicles -- Automotive cables -- Part 3: Dimensions and requirements for 30 V a.c. or 60 V d.c. single core copper conductor cables | |
| Road vehicles -- Automotive cables -- Part 4: Dimensions and requirements for 30 V a.c. and 60 V d.c. single core aluminium conductor cables | |
| Road vehicles -- Automotive cables -- Part 5: Dimensions and requirements for 600 V a.c. or 900 V d.c. and 1 000 V a.c. or 1 500 V d.c. single... | |
| Road vehicles -- Automotive cables -- Part 6: Dimensions and requirements for 600 V a.c. or 900 V d.c. and 1 000 V a.c. or 1 500 V d.c. single... | |
| Road vehicles -- Automotive cables -- Part 7: Dimensions and requirements for 30 V a.c. or 60 V d.c. round, sheathed, screened or unscreened multi or single core copper conductor... | |
| Road vehicles -- Automotive cables -- Part 8: Dimensions and requirements for 30 V a.c. or 60 V d.c. round, sheathed, screened or unscreened multi or single core aluminium conductor... | |
| Road vehicles -- Automotive cables -- Part 9: Dimensions and requirements for 600 V a.c. or 900 V d.c. and 1 000 V a.c. or 1 500 V d.c. round,... | |
| Road vehicles -- Clock extension peripheral interface (CXPI) -- Part 2: Application layer | |
| Road vehicles -- Clock extension peripheral interface (CXPI) -- Part 3: Transport and network layer | |
| Road vehicles -- Clock extension peripheral interface (CXPI) -- Part 4: Data link layer and physical layer | |
| Road vehicles -- Controller area network (CAN) conformance test plan -- Part 2: High-speed medium access unit -- Conformance test plan | |
| Road vehicles -- Durability test method for starter motor for stop and start system | |
| Road vehicles -- Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles -- Part 1: General | |
| Road vehicles -- Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles -- Part 3: Mechanical loads | |
| Road vehicles -- Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles -- Part 4: Climatic loads | |
| Road vehicles -- Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles -- Part 5: Chemical loads | |
| Road vehicles -- Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles -- Part 6: Traction battery packs and systems | |
| Road Vehicles -- Extended vehicle (ExVe) methodology -- Part 1: General information | |
| Road Vehicles -- Extended vehicle (ExVe) methodology -- Part 2: Methodology for designing the extended vehicle | |
| Road vehicles -- Extended vehicle (ExVe) web services -- Part 3: Security | |
| Road vehicles -- Local Interconnect Network (LIN) -- Part 7: Electrical Physical Layer (EPL) conformance test specification | |
| Road vehicles -- Local Interconnect Network (LIN) -- Part 8: Electrical physical layer (EPL) specification: LIN over DC powerline (DC-LIN) | |
| Road vehicles -- Test methods and performance requirements for voltage class B connectors | |
| Road vehicles -- Vehicle interface for electronic Periodic Technical Inspection (ePTI) -- Part 1: Application and communication requirements | |
| Road vehicles \x96 Automotive cables \x96 Part 1: Vocabulary and design guidelines | |
| Road vehicles \x96 Extended vehicle (ExVe) web services \x96 Part 1: Content and definitions | |
| Road vehicles \x96 Extended vehicle (ExVe) web services \x96 Part 2: Access | |
| Road vehicles \x96 In-vehicle Ethernet \x96 Part 10: Transport layer and network layer conformance test plans | |
| Road vehicles \x96 In-vehicle Ethernet \x96 Part 11: Application layer to session layer conformance test plans | |
| Road vehicles \x96 In-vehicle Ethernet \x96 Part 8: Electrical 100-Mbit/s Ethernet transmission media, components and tests | |
| Road vehicles \x96 Safety of the intended functionality | |
| Robotics -- Performance criteria and related test methods for service robots -- Part 2: Navigation | |
| Robotics \x96 Performance criteria and related test methods for service robots \x96 Part 4: Lower-back support robots | |
| Rolling bearings -- Load ratings for hybrid bearings with rolling elements made of ceramic -- Part 1: Dynamic load ratings | |
| Rolling bearings -- Noise testing of rolling bearing greases -- Part 1: Basic principles, testing assembly and test machine | |
| Rolling bearings -- Noise testing of rolling bearing greases -- Part 3: Test and evaluation method MQ | |
| Rolling bearings \x96 Methods for calculating the modified reference rating life for universally loaded rolling bearings | |
| Rolling bearings \x96 Noise testing of rolling bearing greases \x96 Part 4: Test and evaluation method NQ | |
| Rubber hoses and hose assemblies \x96 Wire- or textile-reinforced single-pressure types for hydraulic applications \x96 Specification | |
| Safety information for the content of piping systems and tanks \x96 Part 1: Piping systems | |
| Sampling and test method for cleanable filter media taken from filters of systems in operation | |
| Security and resilience -- Community resilience -- Guidelines for conducting peer reviews | |
| Security and resilience -- Emergency management -- Guidelines for incident management | |
| Security and resilience -- Emergency management -- Part 1: General guidelines for the implementation of a community-based disaster early warning system | |
| Security and resilience \x96 Community resilience \x96 Guidelines for supporting vulnerable persons in an emergency | |
| Security and resilience \x96 Emergency management \x96 Guidelines for the use of social media in emergencies | |
| Security and resilience \x96 Organizational resilience \x96 Guidelines for resilience policy and strategy | |
| Security and resilience \x96 Protective security \x96 Guidelines for an enterprise protective security architecture and framework | |
| Ships and marine technology -- Ball valves for use in low temperature applications -- Design and testing requirements | |
| Ships and marine technology -- Butterfly valves for use in low temperature applications -- Design and testing requirements | |
| Ships and marine technology -- Gate valves for use in low temperature applications -- Design and testing requirements | |
| Ships and marine technology -- General requirements for inclinometers used for the determination of trim and list of LNG carriers | |
| Ships and marine technology -- Life saving and fire protection -- Sea anchors for survival craft and rescue boats | |
| Ships and marine technology -- Major components of emergency towing arrangements | |
| Ships and marine technology -- Marine cranes -- Operation and maintenance requirements | |
| Ships and marine technology -- Maritime safety -- Gas inflation systems for inflatable life-saving appliances | |
| Ships and marine technology -- Model test method for propeller cavitation noise evaluation in ship design -- Part 1: Source level estimation | |
| Ships and marine technology -- Model test method for propeller cavitation noise evaluation in ship design -- Part 2: Noise source localization | |
| Ships and marine technology -- Navigation and ship operations -- Guidelines for onboard telephone equipment | |
| Ships and marine technology -- Shipboard data servers to share field data at sea | |
| Ships and marine technology -- Specification for bunkering of liquefied natural gas fuelled vessels | |
| Ships and marine technology -- Specification of high manganese austenitic steel used for LNG tanks on board ships | |
| Ships and marine technology -- Standard data for shipboard machinery and equipment | |
| Ships and marine technology \x96 Check valves for use in low temperature applications \x96 Design and testing requirements | |
| Ships and marine technology \x96 Design and testing requirements of pneumatic quick-closing valves | |
| Ships and marine technology \x96 Full-scale test method for propeller cavitation observation and hull pressure measurement | |
| Ships and marine technology \x96 Jacking system appliances on self-elevating unit \x96 Acceptance tests | |
| Ships and marine technology \x96 Marine cranes \x96 Manufacturing requirements | |
| Ships and marine technology \x96 Marine cranes \x96 Noise limits and measuring method | |
| Ships and marine technology \x96 Marine cranes \x96 Slewing bearings | |
| Ships and marine technology \x96 Marine environment protection \x96 Oil booms \x96 Part 3: End connectors | |
| Ships and marine technology \x96 Marine environment protection \x96 Vocabulary relating to oil spill response | |
| Ships and marine technology \x96 Marine environment protection: performance testing of oil skimmers \x96 Part 2: Light and medium viscosity oil | |
| Ships and marine technology \x96 Marine environment protection: performance testing of oil skimmers \x96 Part 3: High viscosity oil | |
| Ships and marine technology \x96 Performance test procedures of LNG BOG re-liquefaction system on board a ship | |
| Ships and marine technology \x96 Propeller shaft revolution indicators \x96 Electric type and electronic type | |
| Ships and marine technology \x96 Servicing of inflatable life-saving appliances \x96 Part 1: General | |
| Ships and marine technology \x96 Servicing of inflatable life-saving appliances \x96 Part 2: Inflatable life rafts | |
| Ships and marine technology \x96 Servicing of inflatable life-saving appliances \x96 Part 3: Inflatable lifejackets | |
| Ships and marine technology \x96 Servicing of inflatable life-saving appliances \x96 Part 4: Marine evacuation systems | |
| Ships and marine technology \x96 Servicing of inflatable life-saving appliances \x96 Part 5: Inflated rescue boats | |
| Ships and marine technology \x96 Specifications for the installation of ship communication networks for shipboard equipment and systems | |
| Ships and marine technology \x96 Stud-link anchor chains | |
| Simultaneous interpreting -- Equipment -- Requirements | |
| Smoke and heat control systems \x96 Part 3: Specifications for powered smoke and heat exhaust ventilators | |
| Societal security - Business continuity management systems - Guidance | |
| Soil quality -- Characterization of soil with respect to human exposure | |
| Soil quality -- Determination of the effects of pollutants on soil flora -- Leaf fatty acid composition of plants used to assess soil quality | |
| Soil quality -- Guidance on the choice and evaluation of bioassays for ecotoxicological characterization of soils and soil materials | |
| Soil quality -- Procedure for site-specific ecological risk assessment of soil contamination (soil quality TRIAD approach) | |
| Soil quality -- Sampling -- Part 203: Investigation of potentially contaminated sites | |
| Soil quality -- Sampling -- Part 205: Guidance on the procedure for investigation of natural, near-natural and cultivated sites | |
| Soil quality -- Sampling -- Part 206: Collection, handling and storage of soil for the assessment of biological functional and structural endpoints in the laboratory | |
| Soil quality \x96 Assessment of human exposure from ingestion of soil and soil material \x96 Procedure for the estimation of the human bioaccessibility/bio availability of metals in soil | |
| Soil quality \x96 Determination of perchlorate in soil using ion chromatography | |
| Soil Quality \x96 Guidance on methods for measuring greenhouse gases (CO2, N2O, CH4) and ammonia (NH3) fluxes between soils and the atmosphere | |
| Soil quality \x96 Guidance on the ecotoxicological characterization of soils and soil materials | |
| Soil quality \x96 Identification of ecotoxicological test species by DNA barcoding | |
| Soil quality \x96 Inhibition of reproduction of the soil mite (Hypoaspis aculeifer) by soil contaminants | |
| Soil quality \x96 Measurement of enzyme activity patterns in soil samples using colorimetric substrates in micro-well plates | |
| Soil quality \x96 Sampling \x96 Part 104: Strategies | |
| Soil quality \x96 Sampling \x96 Part 202: Preliminary investigations | |
| Soil quality \x96 Screening method for water content \x96 Determination by refractometry | |
| Solid biofuels -- Determination of mechanical durability of pellets and briquettes -- Part 2: Briquettes | |
| Solid biofuels \x96 Determination of length and diameter of pellets | |
| Specification and qualification of welding procedures for metallic materials \x96 Welding procedure specification \x96 Part 1: Arc welding | |
| Specification and qualification of welding procedures for metallic materials \x96 Welding procedure test \x96 Part 13: Upset (resistance butt) and flash welding | |
| Specification and qualification of welding procedures for metallic materials \x96 Welding procedure test \x96 Part 2: Arc welding of aluminium and its alloys | |
| Spherical plain bearings -- Method for the calculation of static and dynamic load ratings | |
| Springs -- Measurement and test parameters -- Part 1: Cold formed cylindrical helical compression springs | |
| Station uniform for firefighters | |
| Stationary source emissions \x96 Determination of greenhouse gas emissions in energy-intensive industries \x96 Part 1: General aspects | |
| Stationary source emissions \x96 Determination of greenhouse gas emissions in energy-intensive industries \x96 Part 3: Cement industry | |
| Stationary source emissions \x96 Determination of greenhouse gas emissions in energy-intensive industries \x96 Part 4: Aluminium industry | |
| Stationary source emissions \x96 Determination of greenhouse gas emissions in energy-intensive industries \x96 Part 5: Lime industry | |
| Stationary source emissions \x96 Determination of greenhouse gas emissions in energy-intensive industries \x96 Part 6: Ferroalloys and silicon industry | |
| Statistical methods in process management \x96 Capability and performance \x96 Part 7: Capability of measurement processes | |
| Steel for the reinforcement and prestressing of concrete -- Test methods -- Part 1: Reinforcing bars, rods and wire | |
| Steel for the reinforcement and prestressing of concrete -- Test methods -- Part 2: Welded fabric and lattice girders | |
| Steel for the reinforcement and prestressing of concrete \x96 Test methods \x96 Part 3: Prestressing steel | |
| Sterile packaged ready for filling glass cartridges | |
| Sterile packaged ready for filling glass vials | |
| Structural adhesives \x96 Standard database of properties | |
| Surface chemical analysis \x96 Sample handling, preparation and mounting \x96 Part 2: Documenting and reporting the preparation and mounting of specimens for analysis | |
| Sustainability in buildings and civil engineering works -- Design for disassembly and adaptability -- Principles, requirements and guidance | |
| Sustainability in buildings and civil engineering works -- Indicators and benchmarks -- Principles, requirements and guidelines | |
| Sustainability in buildings and civil engineering works \x96 Framework for methods of assessment of the environmental, social and economic performance of construction works as a basis for sustainability assessment \x96... | |
| Technical product documentation \x96 Digital product definition data practices | |
| Test method for CMAS corrosion of thermal/environmenta l barrier coatings under dynamic thermal cycling | |
| Textile floor coverings \x96 Water impermeability test | |
| Textiles -- Quantitative microscopical analysis -- General principles of testing | |
| Textiles \x96 Test method for assessing the matting appearance of napped fabrics after cleansing | |
| Thermal containers -- Safety standard for refrigerating systems using flammable refrigerants -- Requirements for design and operation | |
| Thermal insulation for building equipment and industrial installations \x96 Aluminosilicate wool products \x96 Specification | |
| Thermal insulation products \x96 Rigid nano-microporous insulation for industrial applications \x96 Specification | |
| Thermal Performance of windows and doors \x96 Determination of solar heat gain coefficient using solar simulator \x96 Part 2: Centre of glazing | |
| Thermal performance of windows and doors \x96 Determination of solar heat gain coefficient using solar simulator | |
| Timber structures -- Bending applications of I-beams -- Part 2: Component performance and manufacturing requirements | |
| Timber structures -- Laminated veneer lumber -- Structural properties | |
| Tobacco and tobacco products -- Determination of the width of the strands of cut tobacco | |
| Tobacco and tobacco products -- Determination of tobacco-specific nitrosamines in tobacco products -- Method using LC-MS/MS | |
| Tobacco and tobacco products \x96 Determination of ammonia \x96 Method using ion chromatographic analysis | |
| Tobacco and tobacco products \x96 Determination of water content \x96 Gas-chromatographic method | |
| Tourism and related services \x96 Bareboat charter \x96 Minimum service and equipment requirements | |
| Tourism and related services \x96 Hotels \x96 Service requirements | |
| Tourism and related services \x96 Medical spas \x96 Service requirements | |
| Tourism and related services \x96 Medical tourism \x96 Service requirements | |
| Tourism and related services \x96 Restaurants and catering \x96 Vocabulary | |
| Tourism and related services \x96 Traditional restaurants \x96 Visual aspects, decoration and services | |
| Tourism and related services \x96 Yacht harbours \x96 Essential requirements for luxury harbours | |
| Traceability of rare earths in the supply chain from separated products to permanent magnets | |
| Traditional Chinese medicine -- Test method of single-use acupuncture needles for electrical stimulation | |
| Traditional Chinese medicine \x96 Herbal decoction apparatus | |
| Traditional Chinese medicine \x96 Quality and safety of raw materials and finished products made with raw materials \x96 Part 4: Testing for preservatives and unwanted compounds | |
| Translation services \x97 Post-editing of machine translation output \x97 Requirements | |
| Translation, interpreting and related technology \x96 Vocabulary | |
| Transportable gas storage devices \x96 Hydrogen absorbed in reversible metal hydride | |
| Underwater acoustics -- Quantities and procedures for description and measurement of underwater sound from ships -- Part 2: Determination of source levels from deep water measurements | |
| Underwater acoustics \x96 Quantities and procedures for description and measurement of underwater sound from ships \x96 Part 3: Requirements for measurements in shallow water | |
| Unmanned aircraft systems \x96 Part 3: Operational procedures | |
| Unmanned aircraft systems \x96 Part 4: Vocabulary | |
| Utility lighters \x96 Safety specifications | |
| UV-C devices -- Measurement of the output of a UV-C lamp | |
| Vapour products \x96 Routine analytical vaping machine \x96 Definitions and standard conditions | |
| Walking trolleys -- Requirements and test methods | |
| Water quality -- Determination of perfluoroalkyl and polyfluoroalkyl substances (PFAS) in water -- Method using solid phase extraction and liquid chromatography-tande m mass spectrometry (LC-MS/MS) | |
| Water quality -- Determination of total organic carbon (TOC), dissolved organic carbon (DOC) total bound nitrogen (TNb) and dissolved bound nitrogen (DNb) after high temperature catalytic oxidative combustion | |
| Water quality -- Determination of total organic carbon (TOC), dissolved organic carbon (DOC), total bound nitrogen (TNb), dissolved bound nitrogen (DNb), total bound phosphorus (TPb) and dissolved bound phosphorus (DPb)... | |
| Water quality \x96 Determination of available weak and dissociable (WAD) cyanide \x96 Part 1: Method using ligand exchange, flow injection analysis (FIA), gas-diffusion and amperometric detection | |
| Water quality \x96 Determination of cyclic volatile methylsiloxanes in water \x96 Part 1: Method using purge and trap with gas chromatography-mass spectrometry (GC-MS) | |
| Water quality \x96 Determination of the dissolved fraction of selected active pharmaceutical ingredients, transformation products and other organic substances in water and treated waste water \x96 Method using high performance... | |
| Water quality \x96 Determination of the estrogenic potential of water and waste water \x96 Part 1: Yeast estrogen screen (Saccharomyces cerevisiae) | |
| Water quality \x96 Determination of the estrogenic potential of water and waste water \x96 Part 2: Yeast estrogen screen (A-YES, Arxula adeninivorans) | |
| Water quality \x96 Determination of the estrogenic potential of water and waste water \x96 Part 3: In vitro human cell-based reporter gene assay | |
| Water quality \x96 Determination of the toxicity of water samples on the embryo-larval development of Japanese oyster (Magallana gigas) and blue mussel (Mytilus edulis or M. galloprovincialis) | |
| Water reuse \x96 Vocabulary | |
| Welding \x96 Calibration, verification and validation of equipment used for welding, including ancillary activities | |
| Wildland firefighting personal protective equipment \x96 Requirements and test methods \x96 Part 1: General | |
| Wildland firefighting personal protective equipment \x96 Requirements and test methods \x96 Part 2: Compatibility | |
| Wildland firefighting personal protective equipment \x96 Requirements and test methods \x96 Part 3: Clothing | |
| Wildland firefighting personal protective equipment \x96 Requirements and test methods \x96 Part 4: Gloves | |
| Wildland firefighting personal protective equipment \x96 Requirements and test methods \x96 Part 5: Helmets | |
| Wildland firefighting personal protective equipment \x96 Requirements and test methods \x96 Part 7: Face and eye protection | |
| Wildland firefighting personal protective equipment \x96 Requirements and test methods \x96 Part 8: Hearing | |
| Woodworking machines \x96 Safety \x96 Part 15: Presses | |
| Workplace atmospheres \x96 Determination of inorganic acids by ion chromatography \x96 Part 1: Non-volatile acids (sulfuric acid and phosphoric acid) |
| << Prev | Next >> |