Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
350
400
450
500
550
600
650
660
670
680
690
700
706
707
708
709
710
711
712
713
714
715
716
717
718
720
730
740
750
760
770
800
850
900
950
1000
1050
1500
1620
| Product Name | Notes |
|---|---|
| Acoustics - Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices - Part 1: Airborne noise measurement | |
| Acoustics -- Determination of airflow resistance -- Part 2: Alternating airflow method | |
| Acoustics -- Determination of sound immission from sound sources placed close to the ear -- Part 2: Technique using a manikin | |
| Acoustics -- Measurement of the influence of road surfaces on traffic noise -- Part 2: The close-proximity method | |
| Acoustics \x96 Measurement of sound absorption properties of road surfaces in situ \x96 Part 2: Spot method for reflective surfaces | |
| Adventure tourism \x96 Cyclotourism \x96 Requirements and recommendations | |
| Agricultural and forestry machinery \x96 Electromagnetic compatibility \x96 Part 1: General EMC requirements | |
| Agricultural and forestry machinery \x96 Electromagnetic compatibility \x96 Part 2: Additional EMC requirements for functional safety | |
| Agricultural engineering -- Electrical and electronic equipment -- Testing resistance to environmental conditions | |
| Agricultural trailers and trailed equipment \x96 Drawbar jacks \x96 Part 1: Design safety, test methods and acceptance criteria | |
| Agricultural trailers and trailed equipment \x96 Drawbar jacks \x96 Part 2: Application safety, test methods and acceptance criteria | |
| Aircraft \x96 Deicing/anti-icing methods on the ground | |
| Aircraft ground handling -- Checked baggage -- Part 1: Mass and dimensions | |
| Alphabetical ordering of multilingual terminological and lexicographical data represented in the Latin alphabet | |
| Aluminium caps and aluminium/plastic caps for infusion bottles and injection vials \x96 General requirements and test methods | |
| Animal and vegetable fats and oils \x96 Determination of phthalates in vegetable oils | |
| Application examples for using reaction-to-fire test data for fire safety engineering | |
| Aromatic natural raw materials \x96 Vocabulary | |
| Assessing the adverse impact of wildland fires on the environment and to people through environmental exposure | |
| Asset management \x96 Guidance on the alignment of financial and non-financial functions in asset management | |
| Assistive products -- Classification and terminology | |
| Automated liquid handling systems \x96 Uncertainty of the measurement procedures | |
| Automation systems and integration \x96 Industrial data \x96 Nuclear digital ecosystem specifications | |
| Basic human body measurements for technological design \x96 Part 4: Expected performance of skilled anthropometrists | |
| Best practices for an internal BPoS handbook | |
| Best practices on the selection and use of personal protective equipment (PPE) designed to provide protection for firefighters | |
| Biological evaluation of medical devices \x96 Part 1: Requirements and general principles for the evaluation of biological safety within a risk management process | |
| Biological evaluation of medical devices \x96 Part 55: Interlaboratory study on cytotoxicity | |
| Biological evaluation of medical devices \x96 Requirements for interlaboratory studies to demonstrate the applicability of validated in vitro methods to assess the skin sensitization of medical devices | |
| Biotechnology \x96 General requirements and considerations for cell line authentication | |
| Biotechnology \x96 Inventory of methods for detection of microbiological contamination in mammalian cell culture | |
| Biotechnology \x96 Massively parallel DNA sequencing \x96 General requirements for data processing of shotgun metagenomic sequences | |
| Biotechnology \x96 Predictive computational models in personalized medicine research \x96 Part 1: Constructing, verifying and validating models | |
| Biotechnology \x96 Provenance information model for biological material and data \x96 Part 1: Design concepts and general requirements | |
| Blockchain and distributed ledger technologies (DLTs) \x96 Overview of trust anchors for DLT-based identity management | |
| Blockchain and distributed ledger technologies \x96 Data flow models for blockchain and DLT use cases | |
| Buildings and civil engineering works -- Sealants -- Determination of adhesion/cohesion properties at constant temperature | |
| Bunk beds and high beds \x96 Safety requirements and tests \x96 Part 1: Safety requirements | |
| Bunk beds for domestic use \x96 Safety requirements and tests \x96 Part 2: Test methods | |
| Calculation method of carbon dioxide emission intensity from iron and steel production \x96 Part 4: Guidance for using ISO 14404 family | |
| Calculation of load capacity of bevel gears \x96 Part 30: ISO rating system for bevel and hypoid gears \x96 Sample calculations | |
| Capability of detection - Part 7: Methodology based on stochastic properties of instrumental noise | |
| Carbon dioxide capture, transportation and geological storage \x96 Carbon dioxide enhanced oil recovery (CO2-EOR) \x96 Transitioning from EOR to storage | |
| Carbon dioxide capture, transportation and geological storage \x96 Cross cutting issues \x96 Flow assurance | |
| Child care articles \x96 General safety \x96 Part 2: Mechanical hazards | |
| Cigarettes \x96 Determination of menthol in total particulate matter from mainstream cigarette smoke with a smoking regime according to ISO 3308 (standard smoking regime) \x96 Gas-chromatographic method | |
| Cigarettes \x96 Determination of water in total particulate matter from the mainstrean smoke \x96 Part 1: Gas-chromatographic method | |
| Circular economy \x96 Review of existing value networks | |
| Cleanrooms and associated controlled environments -- Part 12: Specifications for monitoring air cleanliness by nanoscale particle concentration | |
| Cleanrooms and associated controlled environments \x96 Part 21: Airborne particle sampling techniques | |
| Cleanrooms and associated controlled environments \x96 Part 5: Operations | |
| Cleanrooms and associated controlled environments \x96 Part 9: Assessment of surface cleanliness for particle concentration | |
| Clinical investigation of medical devices for human subjects \x96 Good clinical practice | |
| Comparison of worldwide escalator and moving walk safety standards \x96 Part 2: Abbreviated comparison and comments | |
| Competence requirements for biorisk management advisors | |
| Condition monitoring and diagnostics of machine systems -- Tribology-based monitoring and diagnostics -- Part 1: General requirements and guidelines | |
| Condition monitoring and diagnostics of machine systems \x96 Prognostics \x96 Part 1: General guidelines and requirements | |
| Condition monitoring and diagnostics of machines -- Vibration condition monitoring -- Part 5: Diagnostic techniques for fans and blowers | |
| Condition monitoring and diagnostics of machines -- Vibration condition monitoring -- Part 7: Diagnostic techniques for machine sets in hydraulic power generating and pump-storage plants | |
| Condition monitoring and diagnostics of machines -- Vibration condition monitoring -- Part 9: Diagnostic techniques for electric motors | |
| Corrosion of metals and alloys \x96 Test and evaluation method for the corrosion of steel bar embedded in concrete structure exposed to total corrosion zones in marine environments | |
| Corrosion tests in artificial atmospheres \x96 Salt spray tests | |
| Crop protection equipment -- Reciprocating positive displacement pumps and centrifugal pumps -- Test method | |
| Crosslinked polyethylene (PE-X) and crosslinked medium density polyethylene (PE-MDX) -- Effect of time and temperature on expected strength | |
| Dentistry \x96 Brazing materials | |
| Dentistry \x96 Compatibility testing for metal-ceramic and ceramic-ceramic systems (ISO/DIS 9693:2019) | |
| Dentistry \x96 Operating lights | |
| Destructive tests on welds in metallic materials -- Impact tests -- Test specimen location, notch orientation and examination | |
| Determination of the specific surface area of solids by gas adsorption \x96 BET method | |
| Determination of uncertainty for volume measurements of a piston-operated volumetric apparatus using a gravimetric method | |
| Determination of uncertainty for volume measurements of a piston-operated volumetric apparatus using a photometric method | |
| Document management \x96 Portable Document Format \x96 Adding support of AES-GCM in PDF 2.0 | |
| Document management \x96 Portable Document Format \x96 Integrity protection in encrypted documents in PDF 2.0 | |
| Document management \x96 Portable Document Format \x96 PDF 1.7 and 2.0 structure namespace inclusion in ISO 32000-2 | |
| Document management \x96 Portable Document Format \x96 RichMedia annotations conforming to glTF assets | |
| Earth-moving machinery \x96 Product identification numbering system | |
| Earth-moving machinery and mobile road construction machinery \x96 Worksite data exchange \x96 Part 4: Worksite topographical data | |
| Electrically propelled mopeds and motorcycles \x96 Safety specifications \x96 Part 1: On-board rechargeable energy storage system (RESS) | |
| Electrically propelled mopeds and motorcycles \x96 Safety specifications \x96 Part 2: Vehicle operational safety | |
| Electrically propelled mopeds and motorcycles \x96 Safety specifications \x96 Part 3: Electrical safety | |
| Electrically propelled road vehicles --Test specification for lithium-ion traction battery packs and systems -- Part 4: Performance testing | |
| Electrically propelled road vehicles \x96 Functional and safety requirements for power transfer between vehicle and external electric circuit \x96 Part 6: Safety and interoperability requirements for heavy-duty vehicles in magnetic... | |
| Electrochemical noise measurement for assessing the protection of metal afforded by organic coatings | |
| Electronic fee collection \x96 Evaluation of on-board and roadside equipment for conformity to ISO 12813 | |
| Electronic fee collection \x96 Information exchange between service provision and toll charging | |
| Electronic fee collection \x96 Requirements for EFC application interfaces on common media | |
| Electronic fee collection \x96 Support for traffic management | |
| Energy management and energy savings \x96 Guidance for net zero energy in operations using an ISO 50001 energy management system | |
| Energy management systems ? Assessing energy management using ISO 50001:2018 | |
| Environmental information \x96 Competence requirements for teams validating and verifying environmental information | |
| Environmental labels and declarations -- Principles, requirements and guidelines for communication of footprint information | |
| Environmental management -- Guidelines for establishing good practices for combatting land degradation and desertification -- Part 1: Good practices framework | |
| Environmental management -- Material flow cost accounting -- Guidance for phased implementation in organizations | |
| Environmental management -- Material flow cost accounting -- Guidance for practical implementation in a supply chain | |
| Environmental management \x96 Guidelines on the assurance of environmental reports | |
| Environmental performance evaluation \x96 Green debt instruments \x96 Part 1: Process for green bonds | |
| Environmental performance evaluation \x96 Green debt instruments \x96 Part 2: Process for green loans | |
| Environmental performance evaluation \x96 Green debt instruments \x96 Part 4: Verification programme requirements | |
| Environmental solid matrices \x96 Determination of the specific electrical conductivity | |
| Equipment for crop protection \x96 Sprayer nozzles \x96 Colour coding for identification | |
| Ergonomic requirements for office work with visual display terminals (VDTs) \x96 Part 620: The role of sound for users of interactive systems | |
| Ergonomics methods \x96 Part 1: Feedback method \x96 A method to understand how end users perform their work with machines | |
| Ergonomics of human-system interaction \x96 Part 100: Overview of ISO 9241 software ergonomic standards | |
| Ergonomics of human-system interaction \x96 Part 20: An ergonomic approach to accessibility within the ISO 9241 series | |
| Ergonomics of human-system interaction \x96 Part 313: Optical measurement methods for reflective displays | |
| Ergonomics of the thermal environment \x96 Evaluation of thermal environments in vehicles \x96 Part 4: Determination of the equivalent temperature by means of a numerical manikin | |
| Escalators and moving walks \x96 Part 3: Requirements from other standards (ASME A17.1/CSA B44 and Japanese codes) not included in ISO 8103-1 | |
| Examples of good practice for the management of assets of water supply and wastewater systems \x96 Part 1: Water supply | |
| Experiment results on test methods for detection and avoidance (DAA) systems for unmanned aircraft systems | |
| Extended master connection file (?MCF) \x96 Description of mechanical connections and joints in structural systems | |
| Extruded sheets of impact-modified polystyrene (PS-I) \x96 Requirements and test methods | |
| Facility management \x96 Existing performance management in facility management organizations \x96 State of the industry | |
| Facility management\x92s role in sustainability, resilience and adaptability | |
| Fans \x96 Determination of fan sound power levels under standardized laboratory conditions \x96 Part 1: General overview | |
| Fans \x96 Determination of fan sound power levels under standardized laboratory conditions \x96 Part 4: Sound intensity method | |
| Fans \x96 Dimensions | |
| Fans \x96 Efficiency classification for fans \x96 Part 1: General requirements | |
| Fans \x96 System effects and system effect factors | |
| Fasteners \x96 Grooved pins \x96 Half-length center grooves | |
| Fasteners \x96 Grooved pins \x96 One-third-length center grooves | |
| Fasteners \x96 Grooved pins with countersunk head \x96 Full-length diamond grooves | |
| Fasteners \x96 Grooved pins with round head \x96 Full-length diamond grooves | |
| Fasteners \x96 Hexagon high nuts (style 2), with fine pitch thread | |
| Fasteners \x96 Hexagon regular nuts (style 1), with fine pitch thread | |
| Fasteners \x96 Hexagon thin nuts (style 0), with fine pitch thread | |
| Fasteners \x96 Mechanical properties of fasteners made of carbon steel and alloy steel \x96 Part 2: Nuts with specified property classes | |
| Fasteners \x96 Parallel grooved pins \x96 Half-length diamond grooves | |
| Fasteners \x96 Parallel grooved pins, with chamfer point \x96 Full-length diamond grooves | |
| Fasteners \x96 Parallel grooved pins, with pilot point \x96 Full-length diamond grooves | |
| Fasteners \x96 Prevailing torque hexagon nuts \x96 Thin nuts (with non-metallic insert) | |
| Fasteners \x96 Reverse-taper grooved pins \x96 Half-length progressive grooves | |
| Fasteners \x96 Taper grooved pins \x96 Full-length progressive grooves | |
| Fasteners \x96 Taper grooved pins \x96 Half-length progressive grooves | |
| Fibre ropes -- General specifications | |
| Financial services -- International bank account number (IBAN) -- Part 1: Structure of the IBAN | |
| Financial services -- International bank account number (IBAN) -- Part 2: Role and responsibilities of the Registration Authority | |
| Financial services \x96 Natural person identifier (NPI) \x96 Natural person identifier lifecycle operation and management | |
| Financial services \x96 Secure cryptographic devices (retail) \x96 Part 1: Concepts and requirements | |
| Financial services \x96 Semantic technology \x96 Part 2: OWL representation of the ISO 20022 metamodel and e-repository | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Mechanical properties of ceramic composites at high temperature \x96 Determination of compressive properties | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Mechanical properties of ceramic composites at high temperature \x96 Determination of tensile properties | |
| Fire safety on lifts \x96 Part 10: Comparison of safety standards worldwide on lifts used by firefighters and for building evacuation | |
| Functional requirements for disposition of records | |
| Gas cylinders \x96 Fitting of valves to gas cylinders | |
| Gas cylinders \x96 List of provisions | |
| Gas cylinders \x96 Vocabulary | |
| Gas mixers for medical use -- Stand-alone gas mixers | |
| Gas welding equipment \x96 Air-aspirated hand blowpipes \x96 Specifications and tests | |
| Gears \x96 FZG test procedures \x96 Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils | |
| Gears \x96 FZG test procedures \x96 Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils | |
| Gears \x96 FZG test procedures \x96 Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases | |
| Genomics Informatics \x96 Data elements and their metadata for describing structured clinical genomic sequence information in electronic health records | |
| Genomics informatics \x96 Data elements and their metadata for describing the microsatellite instability (MSI) information of clinical massive parallel DNA sequencing | |
| Genomics informatics \x96 Data elements and their metadata for describing the tumor mutation burden (TMB) information of clinical massive parallel DNA sequencing | |
| Genomics informatics \x96 Description rules for genomic data for genetic detection products and services | |
| Genomics informatics \x96 Requirements for interoperable systems for genomic surveillance | |
| Geographic information \x96 Gap analysis of geospatial standards for indoor-outdoor seamless navigation | |
| Geographic Information \x96 Securing interoperability among heterogeneous city domain information models | |
| Geosynthetics \x96 Index test procedure for the evaluation of mechanical damage under repeated loading \x96 Damage caused by granular material (laboratory test method) | |
| Geosynthetics \x96 Sampling and preparation of test specimens | |
| Glass in building -- Tempered soda lime silicate safety glass | |
| Graphic technology -- Printing from digital data across multiple technologies - Principles | |
| Graphic technology -- Spectral measurement and colorimetric computation for graphic arts images | |
| Graphic technology \x96 Safety requirements for graphic technology equipment and systems \x96 Part 2: Prepress and press equipment and systems | |
| Graphical symbols - Test methods - Part 1: Method for testing comprehensibility | |
| Greenhouse gas management and climate change management and related activities \x96 Carbon neutrality | |
| Greenhouse gas management and related activities \x96 Framework and principles for methodologies on climate actions | |
| Greenhouse gas management and related activities \x96 Framework including principles and requirements for assessing and reporting investments and financing activities related to climate change | |
| Guidance on marine environment zonation for steel corrosion embedded in concrete | |
| Guidelines for contributing to the United Nations Sustainable Development Goals | |
| Guidelines for implementation of statistical process control (SPC) \x96 Part 5: Quality data exchange format for SPC software | |
| Guidelines for the use of ISO 5167:2022 | |
| Health informatics -- Telehealth services -- Quality planning guidelines | |
| Health informatics \x96 Accelerating safe, effective and secure remote connected care and mobile health through standards-based interoperability solutions addressing gaps revealed by pandemics | |
| Health informatics \x96 Business requirements for a syntax to exchange structured dose information for medicinal products | |
| Health informatics \x96 Categorial structure and data elements for the identification and exchange of immunization data | |
| Health Informatics \x96 Categorial structures for representation of Ayurvedic medicinal water \x96 Decocting process in Ayurveda | |
| Health informatics \x96 Cybersecurity framework for telehealth environments \x96 Part 2: Cybersecurity reference model of telehealth | |
| Health informatics \x96 Datasets and data structure for clinical and biological evaluation metrics in radiotherapy | |
| Health informatics \x96 General requirements of multi-centre medical data collaborative analysis | |
| Health informatics \x96 Guidelines for exchanging data generated by portable polymerase chain reaction (PCR) devices for point-of-care testing (POCT) between screening centre and clinical laboratory | |
| Health informatics \x96 Guidelines for implementation of HL7 FHIR based on ISO 13940:2015, ISO 13606-1:2019 and ISO 13606-3:2019 | |
| Health informatics \x96 Guidelines for self-assessment questionnaire systems | |
| Health informatics \x96 Identification of medicinal products \x96 Core principles for maintenance of identifiers and terms | |
| Health informatics \x96 Identification of medicinal products \x96 Implementation guidelines for ISO 11239 data elements and structures for the unique identification and exchange of regulated information on pharmaceutical dose forms,... | |
| Health informatics \x96 Information model for quality control of traditional Chinese medicinal products | |
| Health informatics \x96 Internet healthcare service pattern | |
| Health informatics \x96 Introduction to Ayurveda informatics | |
| Health informatics \x96 Personalized digital health \x96 Digital therapeutics health software systems | |
| Health informatics \x96 Personalized digital health framework | |
| Health informatics \x96 Reference architecture for syndromic surveillance systems for infectious diseases | |
| Health informatics \x96 Reference model for virtual reality (VR)-based clinical practice simulation | |
| Health informatics \x96 Sex and gender in electronic health records | |
| Health informatics \x96 Standardized data set for transfer of hemodialysis patients | |
| Health informatics \x96 Standardizing graphical content | |
| Health informatics \x96 The architecture of internet healthcare service network | |
| Health software and health IT systems safety, effectiveness and security \x96 Part 2-1: Coordination \x96 Guidance and requirements for the use of assurance cases for safety and security | |
| Hexagon head bolts with metric fine pitch thread \x96 Product grades A and B | |
| Hexagon head screws with metric fine pitch thread \x96 Product grades A and B | |
| Horizontal methods for molecular biomarker analysis \x96 Methods of analysis for the detection of genetically modified organisms and derived products \x96 Part 10: Construct- and event-specific detection methods for genetically... | |
| Horizontal methods for molecular biomarker analysis \x96 Methods of analysis for the detection of genetically modified organisms and derived products \x96 Part 8: DNA extraction from alfalfa seeds and real-time... | |
| Horizontal methods for molecular biomarker analysis \x96 Methods of analysis for the detection of genetically modified organisms and derived products \x96 Part 9: Construct-specific real-time PCR based screening method for... | |
| Hydrogen fuel quality \x96 Product specification | |
| Hydrogen technologies \x96 Methodology for determining the greenhouse gas emissions associated with the production, conditioning and transport of hydrogen to consumption gate | |
| Imaging materials \x96 Image permanence specification of reflection photographic prints for indoor applications \x96 Part 1: Test methods | |
| Implants for surgery \x96 Non-destructive testing \x96 Radiographic examination of cast metallic surgical implants | |
| Industrial automation systems and integration \x96 Integration of life-cycle data for process plants including oil and gas production facilities \x96 Part 4: Core reference data | |
| Industrial automation systems and integration \x96 Physical device control \x96 Data model for computerized numerical controllers \x96 Part 17: Process data for additive manufacturing | |
| Industrial automation systems and integration \x96 Product data representation and exchange \x96 Part 15: Description methods: SysML XMI to XSD transformation | |
| Industrial systems, installations and equipment and industrial products \x96 Structuring principles and reference designations \x96 Part 101: Modelling concepts, guidelines and requirements for power supply systems | |
| Industrial trucks \x96 Safety requirements and verification \x96 Part 8: Regional requirements for countries outside the European Community | |
| Information and documentation \x96 Archival paper \x96 Requirements for permanence and durability | |
| Information and documentation \x96 Digital records conversion and migration process | |
| Information and documentation \x96 Document storage requirements for archive and library materials | |
| Information and documentation \x96 Guidelines for the content, organization and presentation of indexes | |
| Information and documentation \x96 International standard identifier for libraries and related organizations (ISIL) | |
| Information and documentation \x96 International standard music number (ISMN) | |
| Information and documentation \x96 Paper for documents \x96 Requirements for permanence | |
| Information and documentation \x96 RFID in libraries \x96 Part 4: Encoding of data elements based on rules from ISO/IEC 15962 in an RFID tag with partitioned memory | |
| Innovation management \x96 Illustrative examples of ISO 56000 | |
| Integrative design of the building envelope \x96 General principles | |
| Intelligent transport systems \x96 Information interface framework between automated driving systems and users | |
| Intelligent transport systems \x96 Management of electronic traffic regulations (METR) \x96 Part 1: Vocabulary | |
| Intelligent transport systems \x96 Management of electronic traffic regulations (METR) \x96 Part 2: Operational concepts (ConOps) | |
| Intelligent transport systems \x96 Management of electronic traffic regulations (METR) \x96 Part 3: System of systems requirements and architecture (SoSR) | |
| Intelligent transport systems \x96 Mobility integration \x96 Physical architecture view of mobility integration service | |
| Intelligent transport systems \x96 Mobility integration \x96 Role and functional model for mobility using low earth orbit (LEO) satellite system | |
| Intelligent transport systems \x96 Mobility integration \x96 Role model of the human-centric predictive risk information provisioning service | |
| Intelligent transport systems \x96 Public-area mobile robots (PMR) \x96 Part 1: Overview of paradigm | |
| Intelligent transport systems \x96 Roadside modules AP-DATEX data interface \x96 Part 10: Variable message signs | |
| Intelligent transport systems \x96 Secure interfaces governance \x96 Minimum requirements and governance procedures | |
| Intelligent transport systems \x96 Traffic and travel information via transport protocol experts group, generation 2 (TPEG2) \x96 Part 13: Public transport information service (TPEG2-PTS) | |
| Interior air of road vehicles \x96 Part 11: Thermal desorption analysis of organic emissions for the characterization on non-metallic materials for vehicles | |
| Interior air of road vehicles \x96 Part 1: Whole vehicle test chamber \x96 Specification and method for the determination of volatile organic compounds in cabin interiors | |
| Interior air of road vehicles \x96 Part 8: Handling and packaging of materials and components for emission testing | |
| Internal investigations of organizations \x96 Guidance | |
| Jewellery and precious metals -- Fineness of precious metal alloys | |
| Laminate floor coverings \x96 Specification | |
| Language coding \x96 A framework for language varieties \x96 Part 2: Description of the framework | |
| Large outdoor fires and the built environment \x96 Global overview of different approaches to standardization | |
| Laser diffraction measurements \x96 Good practice | |
| Lifts for the transport of persons and goods \x96 Part 22: Prerequisites for certification of lifts, model lifts, lift components and lift functions | |
| Lifts for the transport of persons and goods \x96 Part 23: Requirements for bodies certifying lifts, model lifts, lift components and lift functions | |
| Light and lighting \x96 Building information modelling properties for lighting \x96 Lighting systems | |
| Light and lighting \x96 Commissioning of lighting systems in buildings \x96 Explanation and justification of ISO/TS 21274 | |
| Lubricants, industrial oils and related products (Class L) -- Family C (gears) -- Part 3: Specifications for greases for enclosed and open gear systems | |
| Lubricants, industrial oils and related products (class L) \x96 Family C (gears) \x96 Part 1: Specifications for lubricants for enclosed gear systems | |
| Lubricants, industrial oils and related products (class L) \x96 Family T (Turbines) \x96 Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD) | |
| Manufacturers\x92 considerations for in vitro diagnostic medical devices in a public health emergency | |
| Mass customization value chain management \x96 Part 1: Framework | |
| Measurement of fluid flow by means of pressure differential devices \x96 Guidelines on the effect of departure from the specifications and operating conditions given in ISO 5167 | |
| Measurement of fluid flow by means of pressure-differentia l devices \x96 Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167 series | |
| Measurement of fluid flow in closed conduits \x96 Thermal mass flowmeters | |
| Measurement of gas flow by means of critical flow nozzles | |
| Measuring autofocus repeatability of sharpness and latency | |
| Medical laboratories \x96 Guidance on application of ISO 15189 in anatomic pathology | |
| Metallic and other inorganic coatings \x96 Phosphate conversion coating of metals | |
| Metallic materials \x96 Tensile testing \x96 Part 5: Specification for testing miniaturised test pieces | |
| Method of test for burning velocity measurement of A2L flammable gases | |
| Microbiology of the food chain \x96 Horizontal method for the detection and enumeration of Clostridium spp. \x96 Part 2: Enumeration of Clostridium perfringens by colony-count technique | |
| Microfluidic pumps \x96 Symbols and performance communication | |
| Molecular biomarker analysis \x96 Detection of animal-derived materials in foodstuffs and feedstuffs by real-time PCR \x96 Part 10: Duck DNA detection method | |
| Molecular biomarker analysis \x96 Detection of animal-derived materials in foodstuffs and feedstuffs by real-time PCR \x96 Part 11: Pigeon DNA detection method | |
| Molecular biomarker analysis \x96 Detection of animal-derived materials in foodstuffs and feedstuffs by real-time PCR \x96 Part 8: Turkey DNA detection method | |
| Molecular biomarker analysis \x96 Detection of animal-derived materials in foodstuffs and feedstuffs by real-time PCR \x96 Part 9: Goose DNA detection method | |
| Molecular biomarker analysis \x96 Requirements and guidance for single-laboratory validation of qualitative real-time polymerase chain reaction (PCR) methods | |
| Molecular biomarkers \x96 Detection of DNA in textiles derived from cotton \x96 Part 2: Overview of target sequences for use in polymerase chain reaction (PCR)-based detection methods for cotton genetically... | |
| Monetary valuation of environmental impacts and related environmental aspects | |
| Nanomaterials \x96 Preparation of safety data sheets (SDS) | |
| Nanotechnologies \x96 A test method for detection of nano-object(s) release from mask media | |
| Nanotechnologies \x96 Characterization of nano-objects using single particle inductively coupled plasma mass spectrometry | |
| Nanotechnologies \x96 Chemical characterization of graphene-related two-dimensional materials from powders and liquid dispersions | |
| Nanotechnologies \x96 Considerations for radioisotope labelling methods of nanomaterials for performance evaluation | |
| Nanotechnologies \x96 Crystallinity of cellulose nanomaterials by powder X-ray diffraction (Rietveld analysis) | |
| Nanotechnologies \x96 Extraction method of nanomaterials from lung tissue by proteinase K digestion | |
| Nanotechnologies \x96 Lung burden mass measurement of nanomaterials for inhalation toxicity tests | |
| Nanotechnologies \x96 Multiwall carbon nanotubes \x96 Determination of carbon impurity content by thermogravimetric analysis | |
| Nanotechnologies \x96 Occupational risk management applied to engineered nanomaterials \x96 Part 1: Principles and approaches | |
| Nanotechnologies \x96 Occupational risk management applied to engineered nanomaterials \x96 Part 2: Use of the control banding approach | |
| Nanotechnologies \x96 Performance evaluation of nanosuspensions containing clay nanoplates for quorum quenching | |
| Nanotechnologies \x96 Positron annihilation lifetime measurement for nanopore evaluation in materials | |
| Nanotechnologies \x96 Silica nanomaterials \x96 Characteristics and measurement methods for silica with ordered nanopore array (SONA) | |
| Nanotechnologies \x96 Superhydrophobic surfaces and coatings: Characteristics and performance assessment | |
| Nanotechnologies \x96 Vocabulary \x96 Liposomes | |
| Nanotechnologies \x96 Vocabulary for cellulose nanomaterial | |
| Natural gas \x96 Coal-based synthetic natural gas quality designation and the applicability of ISO/TC 193 standards | |
| Natural gas \x96 Correlation between odorant concentration in air and odour intensity | |
| Neurosurgical implants — Self-closing intracranial aneurysm clips | |
| Non-destructive testing — Qualification and certification of NDT personnel | |
| Nonwovens \x96 Test methods \x96 Part 13: Repeated liquid strike-through time (simulated urine) | |
| Nonwovens \x96 Test methods \x96 Part 14: Coverstock wetback (simulated urine) | |
| Nonwovens \x96 Test methods \x96 Part 1: Determination of mass per unit area | |
| Nonwovens \x96 Test methods \x96 Part 3: Determination of tensile strength and elongation at break using the strip method | |
| Oil and gas industries including lower carbon energy \x96 Fuel ammonia \x96Requirements and guidance for boilers for power generation | |
| Oil and gas industries including lower carbon energy \x96 Guidelines for green manufacturing and lower carbon emission of oil and gas-field equipment and materials | |
| Oil and gas industries including lower carbon energy \x96 Pipeline transportation systems \x96 Pipeline valves | |
| Oil and gas industries including lower carbon energy \x96 Pipeline transportation systems \x96 Requirements and guidance for pipeline life extension assessment | |
| Ophthalmic optics \x96 Uncut finished spectacle lenses \x96 Part 3: Transmittance specifications and test methods | |
| Optics and optical instruments \x96 Test lenses for calibration of focimeters \x96 Part 1: Reference lenses for focimeters used for measuring spectacle lenses | |
| Paints and varnishes \x96 Coating systems for wind-turbine rotor blades \x96 Part 5: Measurement of transmittance properties of UV protective coatings | |
| Paints and varnishes \x96 Coating systems for wind-turbine rotor blades \x96 Part 6: Determination and evaluation of ice adhesion using centrifuge | |
| Petroleum and related products -- Maintenance and use guide for triaryl phosphate ester turbine control fluids | |
| Petroleum and related products \x96 Determination of arsenic in crude petroleum using atomic fluorescence spectrometry | |
| Petroleum and related products \x96 Determination of spray ignition characteristics of fire-resistant fluids \x96 Part 2: Spray test \x96 Stabilised flame heat release method | |
| Petroleum and related products from natural or synthetic sources \x96 Determination of pour point \x96 Part 2: Automated linear cooling method | |
| Petroleum products - Fuels (class F) - Liquefied petroleum gases - Specifications | |
| Petroleum products \x96 Characterization of marine fuels by viscosity gravity constant | |
| Petroleum products \x96 Determination of the filterability of lubricating oils \x96 Part 1: Procedure for oils in the presence of water | |
| Petroleum products \x96 Determination of the filterability of lubricating oils \x96 Part 2: Procedure for dry oils | |
| Petroleum products and lubricants \x96 Determination of rust-prevention characteristics of lubricating greases \x96 Part 2: Method with water wash-out | |
| Petroleum products and lubricants \x96 Determination of the mechanical stability of greases in presence of water | |
| Petroleum products and lubricants \x96 Rheological properties of lubricating greases \x96 Determination of flow point using an oscillatory rheometer with a parallel-plate measuring system | |
| Petroleum products and lubricants \x96 Rheological properties of lubricating greases \x96 Determination of the consistency of greases with metal soap thickener by an oscillatory rheometer with a cone/plate measuring system... | |
| Photography \x96 Photographic reflection prints \x96 Part 3: Evaluation of glossiness | |
| Photography and graphic technology \x96 Extended colour encodings for digital image storage, manipulation and interchange \x96 Part 5: High dynamic range and wide colour gamut encoding for still images (HDR/WCG)... | |
| Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure \x96 Part 3: Fittings | |
| Piston-operated volumetric apparatus \x96 Part 7: Alternative measurement procedures for the determination of volume | |
| Piston-operated volumetric apparatus \x96 Part 8: Photometric reference measurement procedure for the determination of volume | |
| Piston-operated volumetric apparatus \x96 Part 9: Manually operated precision laboratory syringes | |
| Plastics -- Ethylene/vinyl acetate copolymer (EVAC) thermoplastics -- Determination of vinyl acetate content | |
| Plastics \x96 Determination of creep behaviour \x96 Part 2: Flexural creep by three-point loading | |
| Plastics \x96 Differential scanning calorimetry (DSC) \x96 Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion | |
| Plastics \x96 Differential scanning calorimetry (DSC) \x96 Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) | |
| Plastics \x96 Poly(methyl methacrylate) double- and triple-skin sheets \x96 Test methods | |
| Plastics \x96 Smoke generation \x96 Determination of the corrosivity of fire effluents \x96 Part 1: General concepts and applicability | |
| Plastics \x96 Verification of pendulum impact-testing machines \x96 Charpy, Izod and tensile impact-testing | |
| Plastics pipes and fittings \x96 Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C | |
| Plastics piping systems for the supply of gaseous fuels \x96 Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing \x96 Part 7: Assessment of conformity | |
| Playground and recreational areas \x96 Framework for the competence of playground inspectors and playground maintenance technicians | |
| Powered hand-held hedge trimmers \x96 Safety | |
| PPE for firefighters - Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring... | |
| Protective clothing against heat and flame -- Part 2: Skin burn injury prediction -- Calculation requirements and test cases | |
| Protective clothing for firefighter's who are engaged in support activities associated with structural fire fighting -- Laboratory test methods and performance | |
| Qualification test of welders - Fusion welding - Part 1: Steels (ISO/DIS 9606-1:2008) | |
| Quality management -- Customer satisfaction -- Guidelines for codes of conduct for organizations | |
| Quality management -- Customer satisfaction -- Guidelines for complaints handling in organizations | |
| Quality management -- Customer satisfaction -- Guidelines for dispute resolution external to organizations | |
| Quality management -- Customer satisfaction -- Guidelines for monitoring and measuring | |
| Quality management \x96 Guidance for quality tools and their application | |
| Quality management \x96 Guidance on statistical techniques for ISO 9001:2015 | |
| Quality management \x96 Guidelines for competence management and people development | |
| Quality management \x96 Guidelines for people engagement | |
| Quality management \x96 Guidelines for quality management in projects | |
| Quality management \x96 Guidelines for quality plans | |
| Quality management systems \x96 Managing an organization for quality results \x96 Guidance for realizing financial and economic benefits | |
| Radio frequency identification of animals \x96 Code structure | |
| Radiofrequency identification of animals \x96 Advanced transponders \x96 Part 3: Applications | |
| Radiological protection \x96 Procedures for monitoring the dose to the lens of the eye, the skin and the extremities | |
| Railway applications \x96 Polymeric composite sleepers, bearers and transoms \x96 Part 1: Material characteristics | |
| Railway applications \x96 Polymeric composite sleepers, bearers and transoms \x96 Part 3: General requirements | |
| Railway applications \x96 Principles of train detection for operations and services | |
| Railway applications \x96 Vehicle reference masses | |
| Railway infrastructure \x96 Rail fastening systems \x96 Two directional test method for resistance to repeated loading | |
| Railway infrastructure \x96 Rail mounted construction, maintenance and inspection machines \x96 Explanation of machine type | |
| Railway infrastructure \x96 Track quality evaluation \x96 Chord-based method | |
| Recreational diving services \x96 Requirements for artificial open water sites | |
| Recreational diving services \x96 Requirements for introductory programmes to scuba diving | |
| Reference data distribution in financial services | |
| Reproducibility of the level of detection (LOD) of binary methods in collaborative and in-house validation studies | |
| Requirements and recommendations for supervisors and operators of point-of-care testing (POCT) equipment | |
| Requirements and recommendations for training programmes in community interpreting | |
| Requirements for large-scale test methods to represent fire threats to people in different fire scenarios | |
| Retrieval and analysis of surgical implants \x96 Part 2: Analysis of retrieved surgical implants | |
| Rheological test methods \x96 Fundamentals and interlaboratory comparisons \x96 Part 1: Determination of the yield point | |
| Rheological test methods \x96 Fundamentals and interlaboratory comparisons \x96 Part 2: Determination of the time-dependent structural change (thixotropy) | |
| Road vehicles - Circuit breakers - Part 1: Definitions and general test requirements | |
| Road vehicles - Circuit breakers - Part 2: User's guide | |
| Road vehicles - Circuit breakers - Part 5: Circuit breakers with tabs with rated voltage of 450 V | |
| Road vehicles -- Unified diagnostic services (UDS) -- Part 1: Application layer | |
| Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - On-board transmitter simulation | |
| Road vehicles -- Vehicle to grid communication interface -- Part 5: Physical layer and data link layer conformance test | |
| Road vehicles -- Vehicle to grid communication interface -- Part 8: Physical layer and data link layer requirements for wireless communication | |
| Road vehicles \x96 Application of predictive maintenance to hardware with ISO 26262-5 | |
| Road vehicles \x96 Component test methods for electrical disturbances from narrowband radiated electromagnetic energy \x96 Part 3: Transverse electromagnetic (TEM) cell | |
| Road vehicles \x96 Component test methods for electrical disturbances from narrowband radiated electromagnetic energy \x96 Part 4: Harness excitation methods | |
| Road vehicles \x96 Diagnostic communication over Internet Protocol (DoIP) \x96 Part 2: Transport protocol and network layer services | |
| Road vehicles \x96 Electrical disturbances from narrowband radiated electromagnetic energy \x96 Radiated immunity for V2X | |
| Road vehicles \x96 Extended vehicle (ExVe) methodology \x96 Part 3: Upstream process to develop services | |
| Road vehicles \x96 Functional safety \x96 Application to generic rechargeable energy storage systems for new energy vehicle | |
| Road vehicles \x96 Functional safety \x96 Use of pre-existing software architectural elements | |
| Road vehicles \x96 Interchange of digital information on electrical connections between towing and towed vehicles \x96 Part 1: Physical and data-link layers | |
| Road vehicles \x96 Interchange of digital information on electrical connections between towing and towed vehicles \x96 Part 3: Application layer for equipment other than brakes and running gear | |
| Road vehicles \x96 Open Test sequence eXchange format (OTX) \x96 Part 3: Standard extensions and requirements | |
| Road vehicles \x96 Open Test sequence eXchange format (OTX) \x96 Part 4: Expanded extensions interface definition | |
| Road vehicles \x96 Safety for automated driving systems \x96 Design, verification and validation | |
| Road vehicles \x96 Software update over the air using mobile cellular network | |
| Road vehicles \x96 Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy \x96 Part 4: Harness excitation methods | |
| Road vehicles \x96 Vehicle to grid communication interface \x96 Part 10: Physical layer and data link layer requirements for single-pair Ethernet | |
| Road vehicles \x96 Vehicle to grid communication interface \x96 Part 202: Extensible SECC Discovery Protocol and Event Notification Protocol | |
| Robotics \x96 Collaborative applications \x96 Test methods for measuring forces and pressures in human-robot contacts | |
| Robots for industrial environments \x96 Automatic end effector exchange systems \x96 Vocabulary | |
| Safety and environment information for biogas plants, biogas transportation and biogas use | |
| Safety of toys \x96 Part 9: Safety aspects related to mechanical and physical properties \x96 Comparison of ISO 8124-1, EN 71-1 and ASTM F963 | |
| Security and resilience \x96 Authenticity, integrity and trust for products and documents \x96 Guidelines for brand protection and enforcement procedures | |
| Security and resilience \x96 Crisis management \x96 Concepts, principles and framework | |
| Series 1 freight containers -- Specification and testing -- Part 2: Thermal containers | |
| Series 1 freight containers \x96 Specification and testing \x96 Part 5: Platform and platform-based containers | |
| Ships and marine technology - Marine gyro-compasses | |
| Ships and marine technology -- Aquatic nuisance species -- Part 1: Ballast water discharge sample port | |
| Ships and marine technology -- Ship's mooring and towing fittings -- Closed chocks | |
| Ships and marine technology -- Ship's mooring and towing fittings -- Cruciform bollards | |
| Ships and marine technology -- Ship's mooring and towing fittings -- Mooring chocks | |
| Ships and marine technology -- Ship's mooring and towing fittings -- Panama chocks | |
| Ships and marine technology -- Ship's mooring and towing fittings -- Pedestal fairleads | |
| Ships and marine technology -- Ship's mooring and towing fittings -- Recessed bitts (casting type) | |
| Ships and marine technology -- Ship's mooring and towing fittings -- Recessed bitts (steel plate type) | |
| Ships and marine technology -- Ship's mooring and towing fittings -- Shipside roller fairleads | |
| Ships and marine technology -- Ship's mooring and towing fittings -- Steel rollers | |
| Ships and marine technology -- Ship's mooring and towing fittings -- Universal fairleads with upper roller | |
| Ships and marine technology -- Ship's mooring and towing fittings -- Universal fairleads without upper roller | |
| Ships and marine technology \x96 Good practices of preventing capsizing during turning of ships with large profile height | |
| Ships and marine technology \x96 Heading control systems | |
| Ships and marine technology \x96 Marine echo-sounding equipment | |
| Ships and marine technology \x96 Ship's mooring and towing fittings \x96 Welded steel bollards for sea-going vessels | |
| Ships and marine technology \x96 Shipboard incinerators \x96 Requirements | |
| Short-range wireless sensor to device communication | |
| Sludge and solid environmental matrices \x96 Determination of dry residue or water content and calculation of the dry matter fraction on a mass basis | |
| Small craft -- Field of vision from the steering position | |
| Small craft -- Fire protection | |
| Small craft -- Steering gear -- Cable over pulley systems | |
| Small craft \x96 Determination of maximum propulsion power rating using manoeuvring speed \x96 Part 2: Craft with a length of hull between 8 m and 24 m (ISO/FDIS 11592-2:2020) | |
| Small craft \x96 Inflatable liferafts \x96 Part 1: Type I and II | |
| Small craft \x96 Liquefied petroleum gas (LPG) systems | |
| Smart community infrastructures \x96 Data exchange and sharing for the lamppost network in smart community | |
| Soft soldering fluxes \x96 Test methods \x96 Part 17: Surface insulation resistance comb test and electrochemical migration test of flux residues | |
| Soil and waste \x96 Determination of chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection | |
| Soil quality -- Characterization of excavated soil and other soil materials intended for re-use | |
| Soil quality -- Determination of particle size distribution in mineral soil material -- Method by sieving and sedimentation | |
| Soil quality -- Dissolution for the determination of total element content -- Part 3: Dissolution with hydrofluoric, hydrochloric and nitric acids using pressurised microwave technique | |
| Soil quality -- Laboratory incubation systems for measuring the mineralization of organic chemicals in soil under aerobic conditions | |
| Soil quality \x96 Determination of potential cation exchange capacity (CEC) and exchangeable cations buffered at pH 7, using a molar ammonium acetate solution | |
| Soil quality \x96 Determination of redox potential \x96 Field method | |
| Solar energy \x96 Calibration of pyranometers by comparison to a reference pyranometer | |
| Solar energy \x96 Vocabulary | |
| Solid biofuels \x96 Characterization of wood chip fuels \x96 Essential information for producers, suppliers and users | |
| Space systems \x96 Design, testing and operation of a large constellation of spacecraft | |
| Sports and recreational facilities \x96 Probes for entrapment/entanglem ent on playground equipment \x96 Collection of data | |
| Stationary source emissions -- Green house gases - Ongoing quality control of automated measuring systems | |
| Statistical methods \x96 Guidelines for the evaluation of conformity with specified requirements | |
| Statistical methods for use in proficiency testing by interlaboratory comparison | |
| Statistical methods in process management \x96 Capability and performance \x96 Part 9: Process capability statistics for characteristics defined by geometrical specifications | |
| Steel \x96 Determination of aluminium content \x96 Flame atomic absorption spectrometric method | |
| Steel and iron \x96 Determination of titanium content \x96 Diantipyrylmethane spectrophotometric method | |
| STEP geometry visualization services | |
| Sustainability in buildings and civil engineering works -- General principles | |
| Sustainability in buildings and civil engineering works \x96 Guidelines on the application of the general principles in ISO 15392 | |
| Sustainable cities and communities \x96 Case studies in how smart city operating models support an effective public-health emergency response | |
| Sustainable mobility and transportation \x96 Sustainable mobility services \x96 Part 1: Use cases | |
| Systems and software engineering \x96 Systems and software Quality Requirements and Evaluation (SQuaRE) \x96 General framework for Common Industry Format (CIF) for usability-related information | |
| Technical product documentation (TPD) \x96 General principles of representation \x96 Part 2: Basic conventions for lines | |
| Technical product documentation \x96 Design for manufacturing, assembling, disassembling and end-of-life processing \x96 Part 2: Vocabulary | |
| Terminology work and terminology science \x96 Vocabulary | |
| Terminology work in support of multilingual communication \x96 Part 1: Fundamentals of translation-oriented terminography | |
| Test methods for repair materials for water-leakage cracks in underground concrete structures \x96 Part 1: Test method for thermal stability | |
| Test methods for repair materials for water-leakage cracks in underground concrete structures \x96 Part 2: Test method for chemical resistance | |
| Test methods for repair materials for water-leakage cracks in underground concrete structures \x96 Part 3: Test method for water (wash out) resistance | |
| Test methods for repair materials for water-leakage cracks in underground concrete structures \x96 Part 4: Test method for adhesion on wet concrete surface | |
| Textiles -- Determination of fabric propensity to surface pilling, fuzzing or matting -- Part 3: Random tumble pilling method | |
| Textiles -- Test methods for nonwovens -- Part 4: Determination of tear resistance | |
| Textiles \x96 Evaluation of the wrinkle recovery of fabrics \x96 Appearance method | |
| Thermal insulation - Building elements - In-situ measurement of thermal resistance and thermal transmittance - Part 1: Heat flow meter method | |
| Thermal insulation \x96 Heat transfer by radiation \x96 Physical quantities and definitions | |
| Thermoplastic pipes for the conveyance of fluids \x96 Inspection of polyethylene butt fusion joints using phased array ultrasonic testing | |
| Thermoplastic pipes for the conveyance of fluids \x96 Inspection of polyethylene butt fusion joints using time of flight diffraction testing | |
| Thermoplastic pipes for the conveyance of fluids \x96 Inspection of polyethylene electrofusion socket joints using phased array ultrasonic testing | |
| Thermoplastics pipes for the transport of fluids \x96 Determination of Charpy impact properties \x96 Part 1: General test method | |
| Thermoplastics pipes for the transport of fluids \x96 Determination of Charpy impact properties \x96 Part 2: Test conditions for pipes of various materials | |
| Thermoplastics piping systems for non-pressure underground drainage and sewerage \x96 Joints for buried non-pressure applications \x96 Test method for the long-term sealing performance of joints with elastomeric seals by estimating... | |
| Thermoplastics valves \x96 Fatigue strength \x96 Test method | |
| Tourism and related services \x96Tourist information services \x96 Requirements and recommendations | |
| Tractors and machinery for agriculture and forestry \x96 Serial control and communications data network \x96 Part 1: General standard for mobile data communication | |
| Tractors and machinery for agriculture and forestry \x96 Serial control and communications data network \x96 Part 3: Data link layer | |
| Tractors and machinery for agriculture and forestry \x96 Serial control and communications data network \x96 Part 6: Virtual terminal | |
| Tractors and self-propelled machinery for agriculture -- Operator controls -- Actuating forces, displacement, location and method of operation | |
| Traditional Chinese medicine \x96 Priority list of single herbal medicines for developing standards | |
| Traditional Chinese medicine \x96 Test method for moxa floss quality \x96 Concentration of waste particles | |
| Traditional Chinese medicine \x96 Vocabulary for diagnostics \x96 Part 3: Abdomen | |
| Transportation of CO2 by ship | |
| Validation method for fire gas analysis \x96 Part 3: Considerations related to interlaboratory trials | |
| Validation methods for fire gas analyses -- Part 2: Intralaboratory validation of quantification methods | |
| Visualization elements of digital twin \x96 Visualization fidelity | |
| Water and soil quality -- Determination of the toxic effect of sediment and soil samples on growth, fertility and reproduction of Caenorhabditis elegans (Nematoda) | |
| Water quality \x96 Detection and quantification of Legionella spp. and/or Legionella pneumophila by concentration and genic amplification by quantitative polymerase chain reaction (qPCR) \x96 Part 2: On-site methods | |
| Water quality \x96 Polymerase chain reaction (PCR) for the detection and quantification of microorganisms and viruses \x96 General requirements, quality assurance and validation | |
| Welding \x96 Arc stud welding of metallic materials | |
| Welding \x96 Best practices for specification and measurement of ferrite in stainless steel weld metal | |
| Welding \x96 General tolerances for welded constructions \x96 Dimensions for lengths and angles \x96 Shape and position | |
| Welding \x96 Measurement of preheating temperature, interpass temperature and preheat maintenance temperature | |
| Welding and allied processes \x96 Guidelines for the use of the welding parameters related to the welding energy for qualification and specification of welding procedures | |
| Wheelchair seating \x96 Part 14: Concepts related to managing external forces to maintain tissue integrity | |
| Wheelchair seating \x96 Part 15: Selection, placement and fixation of flexible postural support devices in seating | |
| Wood and wood-based products \x96 Background and examples of calculating contributions to carbon stored in harvested wood products (HWP) | |
| Wood and wood-based products \x96 Examples of calculating displacements potentials for wood-based products and considerations for further analyses | |
| Wood and wood-based products \x96 Greenhouse gas dynamics \x96 Part 1: Framework for value chain calculations | |
| Wood and wood-based products \x96 Greenhouse gas dynamics \x96 Part 2: Forest carbon balance | |
| Wood and wood-based products \x96 Greenhouse gas dynamics \x96 Part 3: Displacement of greenhouse gas emissions | |
| Writing and marking instruments \x96 Specification for caps to reduce the risk of asphyxiation |
| << Prev | Next >> |