Accuris Datasheets for Standards and Technical Documents

Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more

Page: 1 150 200 250 300 350 400 450 460 470 480 490 500 509 510 511 512 513 514 515 516 517 518 519 520 521 530 540 550 560 570 580 600 650 700 750 800 850 1000 1500 1620
Product Name Notes
AAC 'aircrete' blocks and masonry
Access to domestic underground drainage systems
Advances in timber grading
Aircrete: thin joint mortar systems
AISC Rehabilitation and Retrofit Guide - A Reference for Historic Shapes and Specifications
AISC Rehabilitation and Retrofit Guide: A Reference for Historic Shapes and Specifications
Alkali-silica reaction in concrete \x96 background to the guidance notes
Alkali-silica reaction in concrete \x96 detailed guidance for new construction
Alkali-silica reaction in concrete \x96 simplified guidance for new construction using normal reactivity aggregates
Alkali-silica reaction in concrete \x96 worked examples
Alkali-silica reaction in concrete
ANTENNA, WHIP AT-271B/PRC
Application of Luminaire Symbols on Lighting Design Drawing
Architectural use of polymer composites
Assessing environmental impacts of construction; Industry consensus, BREEAM and UK Ecopoints
Assessment of damage in low-rise buildings with particular reference to progressive foundation movement
Automatic External Defibrillators and Remote-Control Defibrillatiors
BASE PLATE AND ANCHOR ROD DESIGN
Best Practices for Bird-Friendly Glazing Design
Better building \x96 integrating the supply chain; A guide for clients and their consultants
Bird, bee and plant damage to buildings
Bricks, blocks and masonry made from aggregate concrete; Part 1. Performance requirements
Bricks, blocks and masonry made from aggregate concrete; Part 2. Appearance and environmental aspects
Bricks, blocks and masonry made from aggregate concrete
Building mortar
Building overseas in warm climates
Building performance feedback: getting started
CABLE, ELECTRICAL, FLAT, ROUND CONDUCTOR, SHIELDED AND JACKETED, 150 DEG. C
CABLE, ELECTRICAL, FLAT, ROUND CONDUCTOR, SHIELDED AND JACKETED, 200 DEG. C
CABLE, ELECTRICAL, FLAT, ROUND CONDUCTOR, SHIELDED AND JACKETED, GENERAL SPECIFICATION FOR:
CABLE, RADIO FREQUENCY, FLEXIBLE, COAXIAL, 50 OHMS
CAPACITOR, FIXED, CERAMIC, CHIP, .56 \xb5F THROUGH 1 \xb5F
CAPACITOR, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM (POLARIZED, SINTERED SLUG)
CAPACITORS FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM (POLARIZED, SINTERED SLUG)
CAPACITORS, FIXED, CERAMIC, CHIP, .56 \xb5F THROUGH 1 \xb5F
CAPACITORS, FIXED, FEED THROUGH, ELECTROMAGNETIC INTERFERENCE SUPPRESSION, (HERMETICALLY SEALED IN METAL CASES)
Carbonation of concrete and its effect on durability
Cardiac Defibrillator Devices
CASTELLATED AND CELLULAR BEAM DESIGN
CFCs in buildings
Choosing Light Sources for General Lighting
Choosing wood adhesives
Clay bricks and clay brick masonry Part 1
Clay bricks and clay brick masonry Part 2
Clay bricks and clay brick masonry
Cleaning buildings: legislation and good practice
Cleaning exterior masonry; Developing and implementing a strategy
Cleaning exterior masonry; Methods and materials
Cleaning exterior masonry
Climate and site development; Part 1. General climate of the UK
Climate and site development; Part 2. Influence of microclimate
Climate and site development; Part 3. Improving microclimate through design
Climate and site development
Common defects in low-rise traditional housing
Condensation in roofs
CONNECTOR, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SHROUD 2 HOLE PIN AND ADAPTER, ELECTRICAL, COAXIAL, RF, SOCKET CONTACT, SERIES SMP TO SMP
CONNECTOR, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SOCKET CONTACT SERIES SMP FOR .047 AND .086 SEMIRIGID CABLES
CONNECTORS, ELECTRICAL, RECEPTACLE, RADIO FREQUENCY, COAXIAL, SERIES BMZ, FOR FLEXIBLE CABLE
CONNECTORS, Z-AXIS COMPRESSION, HIGH DENSITY, HIGH PERFORMANCE, GENERAL REQUIREMENTS FOR
CONSTRUCTABILITY OF STRUCTURAL STEEL BUILDINGS
Construction logistics: an introduction
Contaminated land: ingress of organic vapours into buildings
Continuous mechanical ventilation in dwellings; Design, installation and operation
Control of lichens, moulds and similar growths
Corrosion of metal components in walls
Corrosion of metals by wood
Corrosion of reinforcement in concrete: electrochemical monitoring
Corrosion of steel in concrete: service life design and prediction
Corrosion of steel in concrete; Durability of reinforced concrete structures
Corrosion of steel in concrete; Investigation and assessment
Corrosion of steel in concrete; Protection and remediation
Corrosion of steel in concrete
Curved Member Design
Damage to structures from ground-borne vibration
Damp-proof courses
Desiccation in clay soils
DESIGN AND ANALYSIS OF ASME BOILER AND PRESSURE VESSEL COMPONENTS IN THE CREEP RANGE
Design Guide for Color and Illumination
Design Guide for Hotel Lighting
Design Guide for Lighting for Toll Plazas
Design Guide for Lighting the Roadway in Work Zones
Design Guide for Reinforced Concrete Columns
Design Guide for Residential Street Lighting
Design Guide for Roundabout Lighting
Design Guide for Selection, Installation, Operations and Maintenance of Roadway Lighting Control Systems
Design Guide for Sustainable Lighting: An Introduction to the Environmental Impacts of Lighting
Design Guide for The Commissioning Process Applied to Lighting and Control Systems
Design Guide on Active Core Sunlighting for Buildings
Design of Blast Resistant Structures
DESIGN OF MODULAR STEEL-PLATE COMPOSITE WALLS FOR SAFETY-RELATED NUCLEAR FACILITIES
Design of Steel Structures: Eurocode 3: Design of Steel Structures Part 1-1: General Rules and Rules for Buildings
Design of timber floors to prevent decay
Design of Wood Structures-ASD/LRFD, Sixth Edition
Design Specification for Unbonded Post-Tensioned Precast Concrete Special Moment Frames Satisfying ACI 374.1 (ACI 550.3-13) and Commentary
Design Specification for Unbonded Post-Tensioned Precast Concrete Special Moment Frames Satisfying ACI 374.1 (ACI 550.3M-13) and Commentary
Design, Manufacturing and Applications of Composites; 10th Canada/Japan
Designing for P/M Video
DESIGNING WITH STRUCTURAL STEEL - A GUIDE FOR ARCHITECTS
DESTRUCTIVE TESTING METHODS
Determining wind actions using Eurocode 1 Part 1: Guidance on the use of BS EN 1991-1-4
Determining wind actions using Eurocode 1 Part 2: Worked examples \x96 wind loads on a two-storey house and 128 m tower
Determining wind actions using Eurocode 1 Part 3: Worked example \x96 calculation of forces on a tower using the full dynamic method
Determining wind actions using Eurocode 1: Set of 3 BRE Digests
DEVELOPMENT OF AN IMPROVED PIPELINE BREAKFLOW MODEL - FINAL REPORT
Developmental and Reproductive Toxicology: A Practical Approach
Dimensioning and Tolerancing Addendum - 1997
Dry rot: its recognition and control
Drying out buildings
Dust explosions
Electrical interference in buildings
Electrical Math and Drawing Data Creation Standard GM Product Manager
Electronic Math Model and Drawing Creation Standard Data Organization - Unigraphics
Electronic Math Model and Drawing Data Creation Standard (Data Organization - Unigraphics with GMiMAN)
Electronic Math Model and Drawing Data Creation Standard (Data Organization - Unigraphics)
Electronic Math Model and Drawing Data Creation Standard Data Organization - CADAM (Mainframe)
Electronic Math Model and Drawing Data Creation Standard Data Organization - CGS
Electronic Math Model and Drawing Data Creation Standard Data Organization - UGMX (Workstation)
Electronic Math Model and Drawing Data Creation Standard Data Organization - Unigraphics with GM/PDM
Electronic Math Model and Drawing Data Creation Standard Data Organization - Unigraphics with GMiMAN
Electronic Math Model and Drawing Data Creation Standard Data Organization - Unigraphics
Electronic Math Model and Drawing Data Creation Standard Drawing Data - CADAM (Mainframe)
Electronic Math Model and Drawing Data Creation Standard Drawing Data - CGS
Electronic Math Model and Drawing Data Creation Standard Drawing Data - Introduction
Electronic Math Model and Drawing Data Creation Standard Drawing Data - UGMX (Workstation)
Electronic Math Model and Drawing Data Creation Standard Drawing Data - Unigraphics V11.X
Electronic Math Model and Drawing Data Creation Standard Drawing Data Organization - Format Requirements
Electronic Math Model and Drawing Data Creation Standard Geometry - CGS
Electronic Math Model and Drawing Data Creation Standard Geometry
Electronic Math Model and Drawing Data Creation Standard Glossary
Electronic Math Model and Drawing Data Creation Standard GM Product Manager
Electronic Math Model and Drawing Data Creation Standard Math Data Sharing Agreement
Electronic Math Model and Drawing Data Creation Standard Reference Sources
Electronic Math Model and Drawing Data Creation Standard TDMF
Electronic Math Model and Drawing Data Creation Standard User Defined Attributes
EN 927: the new European Standard for exterior wood coatings
End-Plate Moment Connections
Energy efficiency in dwellings
Erection Bracing of Low-Rise Structural Steel Buildings
Estimating daylight in buildings
Estimation of thermal and moisture movements and stresses: Part 3
Estimation of thermal and moisture movements and stresses
EXTENDED END-PLATE MOMENT CONNECTIONS SEISMIC AND WIND APPLICATIONS
Facade Attachments to Steel-Framed Buildings
FILTER, EMI and TRANSIENT SUPPRESSION, HYBRID
FILTER, EMI, and TRANSIENT SUPPRESSION, HYBRID
FILTER, EMI, HYBRID
Fire modelling
Fire Resistance of Structural Steel Framing
Fire risks from combustible cavity insulation
Flat roof design: bituminous roofing membranes
Flat roof design: the technical options
Flat roof design: thermal insulation
Floor Vibrations Due to Human Activity
Flush and Extended Multiple-Row Moment End-Plate Connections
Frame Design Using Web-Tapered Members
Frameless Shower Enclosures
GASKETS, EMI/RFI SHIELDING, EXPANDED PTFE WITH CARBON FILLER
GASKETS, SHIELDING, EMI/RFI ORIENTED WIRES IN SILICONE RUBBER
GASKETS, SHIELDING, EMI/RFI, ORIENTED WIRES IN SILICONE RUBBER
Global Dimensioning And Tolerancing Addendum \x96 2004
GRC
Guide for the Selection of Photocontrols for Outdoor Lighting Applications
Guide to machine strength grading of timber.
Guideline for Developing an Energy Control Plan for Manual Hand Valves in Ammonia Refrigeration Systems
Handover of Office Building Operations protocol (HOBO)
Hardwoods for construction and joinery; Current and future sources of supply
Hardwoods for joinery and construction; Technical assessment methods
Hardwoods for joinery and construction; Test results and recommendations
Hardwoods for joinery and construction
Heat losses through ground floors
High Strength Bolts: A Primer for Engineers
High Strength Bolts: A Primer for Structural Engineers
Hollow Structural Section Connections
Hybrid Steel Frames with Wood Floors
Identifying damage by wood-boring insects
Increasing the fire resistance of existing timber floors
Industrial Buildings-Roofs to Anchor Rods
Industrial Buildings: Roofs to Anchor Rods
Industrial platform floors: mezzanine and raised storage
Insecticidal treatments against wood-boring insects
Installing BMS to meet electromagnetic compatibility requirements
Installing wall ties in existing construction
Insulating glazing units
Insulation against external noise
Interstitial condensation and fabric degradation
Life cycle impacts of timber; A review of the environmental impacts of wood products in construction
Light + Design A Guide to Designing Quality Lighting for People and Buildings
Lists of excluded materials: a change in practice
Load and Resistance Factor Design of W-Shapes Encased in Concrete
Low-and Medium-Rise Steel Buildings
Low-rise building foundations on soft ground
Low-rise building foundations: the influence of trees in clay soils
Low-rise buildings on fill; Classification and load-carrying characteristics
Low-rise buildings on fill; Engineered fill
Low-rise buildings on fill; Site investigation, ground movement and foundation design
Low-rise buildings on fill
Low-rise buildings on shrinkable clay soils; Part 1
Low-rise buildings on shrinkable clay soils; Part 2
Management of Unigraphics V13 Data with GM/PDM 4.0
Marine aggregates in concrete
Masonry and concrete structures: measuring in-situ stress and elasticity using flat jacks
Measuring the compressive strength of masonry materials: the screw pull-out test
MEDICAL ELECTRICAL EQUIPMENT - PART 2-4: PARTICULAR REQUIREMENTS FOR THE SAFETY OF CARDIAC DEFIBRILLATORS (INCLUDING AUTOMATED EXTERNAL DEFIBRILLATORS)
MODIFICATION OF EXISTING WELDED STEEL MOMENT FRAME CONNECTIONS FOR SEISMIC RESISTANCE
Monitoring building and ground movement by precise levelling
Natural ventilation in non-domestic buildings
New materials in hot climates
Optimising ground investigation
Painting exterior wood
Partially Restrained Composite Connections
Perforated clay bricks
Photovoltaics: integration into buildings
Plastics external glazing
Prefabricated power cabling for buildings; Procuring, installing and testing
Protecting buildings against lightning
Rain Loads and Ponding
Re-covering old timber roofs
Recycled aggregates
Reducing the effects of climate change by roof design
Reducing the risk of pest infestations in buildings
Reinforcing Bars: Anchorages and Splices
RELAY, SOLID STATE, HERMETICALLY SEALED, OPTICALLY ISOLATED, 1 OR 2 A, WITH OR WITHOUT CIRCUIT-BREAKER ACTION OR STATUS INDICATION, 6-PIN CERAMIC DUAL-IN-LINE PACKAGE
Reliability and performance of solar-collector systems
Relocatable buildings: structural design, construction and maintenance
Repairing brick and block masonry
Replacing wall ties
RESISTOR NETWORKS, FIXED, FILM, 10 PIN, SIP, EXTENDED LEAD LENGTH
RESISTOR, CHIP, FIXED, BULK METAL FOIL, ULTRA PRECISION, STYLE 2018
RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY AND SPACE LEVEL, STYLE 0502
RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY AND SPACE LEVEL, STYLE 0505
RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY and SPACE LEVEL, STYLE 0705
RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY and SPACE LEVEL, STYLE 1005
RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY and SPACE LEVEL, STYLE 1010
RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY AND SPACE LEVEL, STYLE 1206
RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY AND SPACE LEVEL, STYLE 1505
RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY AND SPACE LEVEL, STYLE 2010
RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY and SPACE LEVEL, STYLE 2208
RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY AND SPACE LEVEL, STYLE 2512
RESISTOR, FIXED, FILM, CHIP (MELF), 1 WATT, STYLE 2512
RESISTOR, FIXED, FILM, CHIP (MELF), 1/2 WATT, STYLE 2010
RESISTOR, FIXED, FILM, CHIP (MELF), 1/8 WATT, STYLE 1206
RESISTOR, FIXED, FILM, CHIP (MELF), 2 WATT, STYLE 3610
RESISTOR, FIXED, FILM, PRECISION, 0.25 WATT, POWER CURVE C
RESISTOR, FIXED, WIREWOUND, SURFACE MOUNT, POWER TYPE (1 WATT)
RESISTOR, FIXED, WIREWOUND, SURFACE MOUNT, POWER TYPE (1/2 WATT)
RESISTOR, FIXED, WIREWOUND, SURFACE MOUNT, POWER TYPE (2 WATT)
RESISTOR, VARIABLE, SURFACE MOUNT, 4MM, MULTITURN TRIMMER, 1/4 WATT
RESISTOR, VOLTAGE SENSITIVE, CHIP, METAL OXIDE VARISTOR
RESISTORS, CHIP, FIXED, BULK METAL FOIL, ULTRA PRECISION, STYLE 2018
REVISIONS AND ERRATA TO CASTELLATED AND CELLULAR BEAM DESIGN
REVISIONS and ERRATA to Curved Member Design
REVISIONS AND ERRATA TO DESIGN OF MODULAR STEEL-PLATE COMPOSITE WALLS FOR SAFETY-RELATED NUCLEAR FACILITIES
REVISIONS and ERRATA to Facade Attachments to Steel-Framed Buildings
REVISIONS and ERRATA to Stability Design of Steel Buildings
REVISIONS and ERRATA to Steel-Framed Stairway Design
REVISIONS and ERRATA to Vertical Bracing Connections - Analysis and Design
REVISIONS AND ERRATA TO VIBRATIONS OF STEEL-FRAMED STRUCTURAL SYSTEMS DUE TO HUMAN ACTIVITY
REVISIONS and ERRATA to Welded Connections - A Primer for Engineers
Rising damp in walls: diagnosis and treatment
Roadway Lighting Maintenance
Roof loads due to local drifting of snow
Safe as houses?
Sanitary pipework; Part 1. Design basis
Sanitary pipework; Part 2. Design of pipework
Section Index
Selecting building sealants with ISO 11600
Selecting gaskets for construction joints
Selecting natural building stones
Selecting windows by performance
SEMICONDUCTOR DEVICE, DIODE, TRANSIENT SUPPRESSOR, ARRAY, BI-DIRECTIONAL
SEMICONDUCTOR DEVICE, DIODE, TRANSIENT VOLTAGE SUPPRESSOR, ARRAY, UNIDIRECTIONAL
Serviceability Design Considerations for Steel Buildings
SHIELDING BEADS, FERRITE, LEADED, EMI SUPPRESSOR
SHIELDING TAPE, EMI, KNITTED WIRE MESH
Shrinkage of natural aggregates in concrete
Simple measuring and monitoring of movement in low-rise buildings; Part 1. Cracks
Simple measuring and monitoring of movement in low-rise buildings; Part 2. Settlement, heave and out-of-plumb
Site investigation for low-rise building: desk studies
Site investigation for low-rise building: procurement
Site investigation for low-rise building: soil description
Site investigation for low-rise building: the walk-over survey
Site investigation for low-rise building: trial pits
Site investigation for low-rise buildings: direct investigations
Slate and tile roofs: avoiding damage from aircraft wake vortices
Slurry trench cut-off walls to contain contamination
Soakaway design
Sound insulation: basic principles
SOUND ISOLATION AND NOISE CONTROL IN STEEL BUILDINGS
Specifying structural timber
SpeedCore Systems for Steel Structures
Stability Design of Steel Buildings
Stability under wind load of loose-laid external roof insulation boards
Stage Lighting\x97A Guide to the Planning of Theatres and Auditoriums
Staggered Truss Framing Systems
Stainless steel as a building material
Static load testing: concrete floor and roof structures within buildings
Steel and Composite Beams with Web Openings
Steel Plate Shear Walls
Steel structures supporting composite floor slabs: design for fire
Steel-Framed Open-Deck Parking Structures
Steel-Framed Stairway Design
Stiffening of Wide-Flange Columns at Moment Connections: Wind and Seismic Applications
Structural appraisal of buildings with long-span roofs
Structural appraisal of existing buildings for change of use
STRUCTURAL APPRAISAL OF EXISTING BUILDINGS, INCLUDING FOR A MATERIAL CHANGE OF USE Part 1: Requirements for a structural appraisal
STRUCTURAL APPRAISAL OF EXISTING BUILDINGS, INCLUDING FOR A MATERIAL CHANGE OF USE Part 2: Preparing for structural appraisal
STRUCTURAL APPRAISAL OF EXISTING BUILDINGS, INCLUDING FOR A MATERIAL CHANGE OF USE Part 3: Structural appraisal procedures
STRUCTURAL APPRAISAL OF EXISTING BUILDINGS, INCLUDING FOR A MATERIAL CHANGE OF USE Part 4: Additional considerations and information sources
Structural appraisal of existing buildings, including for a material change of use: 4-part set
Structural design in architecture
Structural fire engineering design: fire development
Structural fire engineering design: introduction
Structural fire engineering design
Structural Stainless Steel
Surface condensation and mould growth in traditionally-built dwellings
Swimming pool roofs: minimising the risk of condensation using warm-deck roofing
SWITCH, CODE INDICATING WHEEL, MIL-PRF-22710/24, WITH STOPS
SWITCH, PUSH BUTTON, ILLUMINATED, 2 LAMP (MIL-PRF-22885/58 WITH LEGEND)
SWITCH, PUSH BUTTON, ILLUMINATED, HIGH IMPACT SHOCK RESISTANT (MIL-PRF-22885/87 WITH LEGEND)
SWITCH, PUSHBUTTON, ILLUMINATED, 4 LAMP (MIL-PRF-22885/101 WITH LEGEND)
Tension tests for concrete
Termites and UK buildings; Biology, detection and diagnosis
Termites and UK buildings; Control and management of subterranean termites
Termites and UK buildings
Testing bond strength of masonry
The assessment of wind loads; Part 1. Background and method
The assessment of wind loads; Part 2. Classification of structures
The assessment of wind loads; Part 3. Wind climate in the United Kingdom
The assessment of wind loads; Part 4. Terrain and building factors and gust peak factors
The assessment of wind loads; Part 5. Assessment of wind speed over topography
The assessment of wind loads; Part 6. Loading coefficients for typical buildings
The assessment of wind loads; Part 7. Wind speeds for serviceability and fatigue assessments
The assessment of wind loads; Part 8. Internal pressures
The assessment of wind loads
The Carbon Performance Rating for offices
The response of structures to dynamic crowd loads
The structural use of wood-based panels
Thermal Bridging Considerations at Interface Conditions
Thermal mass in office buildings; Part 1. An introduction
Thermal mass in office buildings; Part 2. Design criteria
Tilt of low-rise buildings; With particular reference to progressive foundation movement
Timber bridges
Timber for joinery
Timber piles and foundations
Timbers: their natural durability and resistance to preservative treatment.
Torsional Analysis of Structural Steel Members
Traffic noise and overheating in offices
U-values for light steel-frame construction
Underpinning
Unvented domestic hot water systems
Vertical Bracing Connections - Analysis and Design
VOC emissions from building products; Part 1. Sources, testing and emission data
VOC emissions from building products; Part 2. Control, evaluation and labelling schemes
VOC emissions from building products
Wall cladding defects and their diagnosis
Wall cladding: designing to minimise defects due to inaccuracies and movements
Waste minimisation on a construction site
Weathering of white external PVC-U
Welded Connections-A Primer for Engineers
Wet rots: recognition and control
Whole life costing and life-cycle assessment for sustainable building design
Why do buildings crack?
Wind actions on buildings and structures
Wind loading on buildings
Wind loads on canopy roofs
Wind loads on temporary stage decks
Wind scour of gravel ballast on roofs
WIRE, ELECTRICAL, POLYIMIDE/POLYIMIDE/ PTFE INSULATED, NORMAL WEIGHT, NICKEL COATED COPPER, 200 DEG C, 600 VOLT
WIRE, ELECTRICAL, POLYIMIDE/POLYIMIDE/ PTFE INSULATED, NORMAL WEIGHT, SILVER COATED COPPER, 200 DEG C, 600 VOLT
WIRE, ELECTRICAL, POLYIMIDE/POLYIMIDE/ PTFE INSULATED, NORMAL WEIGHT, SILVER COATED HIGH STRENGTH COPPER ALLOY, 200 DEG C, 600 VOLT
WIRE, ELECTRICAL, POLYIMIDE/PTFE INSULATED, LIGHT WEIGHT, NICKEL COATED HIGH STRENGTH COPPER ALLOY, 200 DEG C, 600 VOLT
WIRE, ELECTRICAL, PTFE/POLYIMIDE/PTFE INSULATED, LIGHT WEIGHT, NICKEL COATED COPPER, 200 DEG C, 600 VOLT
WIRE, ELECTRICAL, PTFE/POLYIMIDE/PTFE INSULATED, LIGHT WEIGHT, SILVER COATED COPPER, 200 DEG C, 600 VOLT
WIRE, ELECTRICAL, PTFE/POLYIMIDE/PTFE INSULATED, LIGHT WEIGHT, SILVER COATED HIGH STRENGTH COPPER ALLOY, 200 DEG C, 600 VOLT
Wood plastic composites and plastic lumber
Wood-based panel products; Their contribution to the conservation of forest resources
Wood-based panels; Part 1. Oriented strand board (OSB)
Wood-based panels; Part 2. Particleboard (chipboard)
Wood-based panels; Part 3. Cement-bonded particleboard
Wood-based panels; Part 4. Plywood
Wood-based panels; Part 5. Medium density fibreboard (MDF)
Wood-based panels; Part 6. Hardboard, medium board and softboard
Wood-based panels; Part 7. Selection
Wood-based panels
Zinc-coated steel

<< Prev Next >>