Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
150
200
250
300
350
400
440
450
460
470
480
490
500
501
502
503
504
505
506
507
508
509
510
511
512
520
530
540
550
560
570
600
650
700
750
800
850
1000
1500
1620
| Product Name | Notes |
|---|---|
| Accidentally caused candle flame ignition for audio/video, communication and information technology equipment | |
| Advanced technical ceramics - Ceramic composites - Determination of the fibre/matrix interfacial frictional shear stress at room temperature by a single fibre pushout method | |
| Advanced technical ceramics - Ceramic composites - Determination of the fibre/matrix interfacial frictional shear stress at room temperature by tensile tests on mini-composites | |
| Advanced technical ceramics - Ceramic composites - Determination of the thermal diffusivity of ceramic fibres | |
| Advanced technical ceramics - Ceramic composites - Guide to the determination of the degree of misalignment in uniaxial mechanical tests | |
| Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 3: Determination of filament diameter | |
| Advanced Technical Ceramics - Ceramic Composites - Methods of Test for Reinforcements - Part 5: Determination of Distribution of Tensile Strength and Tensile Strain to Failure of Filaments within a... | |
| Advanced Technical Ceramics - Ceramic Composites - Methods of Test for Reinforcements Part 1: Determination of Size Content | |
| Advanced Technical Ceramics - Ceramic Composites - Methods of Test for Reinforcements Part 2: Determination of Linear Density | |
| Advanced Technical Ceramics - Ceramic Composites - Methods of Test for Reinforcements Part 4: Determination of Tensile Properties of Filament at Ambient Temperature | |
| Advanced Technical Ceramics - Ceramic Composites - Thermophysical Properties Part 1: Determination of Thermal Expansion | |
| Advanced Technical Ceramics - Ceramic Composites - Thermophysical Properties Part 2: Determination of Thermal Diffusivity | |
| Advanced Technical Ceramics - Ceramic Composites, Thermophysical Properties - Part 3: Determination of Specific Heat Capacity | |
| Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature under non-reactive environment - Determination of creep behaviour by the hot end method | |
| Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature Part 9: Method of test for edge-chip resistance | |
| Advanced Technical Ceramics - Methods of Test for Ceramic Coatings Part 1: Determination of Coating Thickness by Contact Probe Profilometer | |
| Advanced Technical Ceramics - Methods of Test for Ceramic Coatings Part 2: Determination of Coating Thickness by the Cap Grinding Method | |
| Advanced Technical Ceramics - Methods of Test for Ceramic Coatings Part 3: Determination of Adhesion by a Scratch Test | |
| Advanced Technical Ceramics - Methods of Test for Ceramic Coatings Part 4: Determination of Chemical Composition | |
| Advanced Technical Ceramics - Methods of Test for Ceramic Coatings Part 5: Determination of Porosity | |
| Advanced technical ceramics Methods of test for ceramic coatings Part 6: Determination of the abrasion resistance of coatings by a micro-abrasion wear test | |
| Advanced technical ceramics Monolithic ceramics Guidance on the selection of test pieces for the evaluation of properties | |
| Advanced technical ceramics Monolithic ceramics Mechanical properties at room temperature Part 6: Guidance for fractographic investigation | |
| Air quality - Measurement of stationary source emissions - Application of EN ISO/IEC 17025:2005 to periodic measurements | |
| Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods | |
| Alarm systems - Combined and integrated alarm systems - General requirements | |
| Alarm systems - Intrusion and hold-up systems - Part 2-7-1: Intrusion detectors - Glass break detectors (acoustic) | |
| Alarm systems - Intrusion and hold-up systems - Part 2-7-2: Intrusion detectors - Glass break detectors (passive) | |
| Alarm systems - Intrusion and hold-up systems - Part 2-7-3: Intrusion detectors - Glass break detectors (active) | |
| Alarm systems - Intrusion and hold-up systems - Part 4: Warning devices | |
| Alarm systems - Intrusion systems - Part 2-3: Requirements for microwave detectors | |
| Alarm systems Alarm transmission systems and equipment Part 4: Annunciation equipment used in alarm receiving centres | |
| Alarm systems Intrusion systems Part 2-2: Requirements for passive infrared detectors | |
| Alarm systems Intrusion systems Part 2-4: Requirements for combined passive infrared and microwave detectors | |
| Alarm systems Intrusion systems Part 2-5: Requirements for combined passive infrared and ultrasonic detectors | |
| Alarm systems Intrusion systems Part 2-6: Requirements for opening contacts (magnetic) | |
| Alarm systems Intrusion systems Part 3: Control and indicating equipment | |
| Alarm systems Intrusion systems Part 7: Application guidelines | |
| Alarm systems Social alarm systems - Part 7: Application guidelines | |
| Ambient air quality - Measurement of bioaerosols Part 1: Determination of moulds using filter sampling systems and culture-based analyses | |
| Animal feeding stuffs - Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese, cobalt and molybdenum after pressure digestion by ICP-AES | |
| Animal feeding stuffs - Determination of sugar content - High performance exchange chromatographic method (HPAEC-PAD) | |
| Animal feeding stuffs - PCR typing of probiotic strains of Saccharomyces cerevisiae (yeast) | |
| APRON, CONSTRUCTION WORKER'S | |
| APRON, CONSTRUCTION WORKER\x92S | |
| APRONS, FOOD HANDLERS' | |
| Arc Welding Equipment - Installation and Use | |
| Automotive fuels - Ethanol (E85) automotive fuel - Requirements and test methods | |
| BANDAGE, ABSORBENT, ADHESIVE | |
| BEDSHIRTS, COTTON, HOSPITAL | |
| BEDSPREAD, COTTON, POLYESTER, COTTON/RAYON, COTTON/POLYESTER OR POLYESTER/RAYON BLEND | |
| BINDING, TEXTILE, COTTON, BIAS-CUT | |
| Biomass gasification - Tar and particles in product gases - Sampling and analysis | |
| Bitumen and bituminous binders - Determination of equiviscous temperature based on Low Shear Viscosity using a Dynamic Shear Rheometer in low frequency oscillation mode | |
| Bitumen and bituminous binders - Determination of Zero-Shear Viscosity (ZSV) using a Shear Stress Rheometer in creep mode | |
| Bitumen and bituminous binders \x97 Determination of the fracture toughness temperature by a three point bending test on a notched specimen | |
| BLANKET, BED, (OTHER THAN ALL WOOL) | |
| CARPET, LOOP, LOW PILE HEIGHT, HIGH DENSITY, WOVEN OR TUFTED WITH ATTACHED CUSHIONING | |
| CARPETS AND RUGS, EXTRA HEAVY PILE WEIGHT, WOVEN, TUFTED AND CUSTOM TUFTED SPECIAL PURPOSE | |
| CARPETS AND RUGS, WOOL, NYLON, ACRYLIC, MODACRYLIC | |
| Cereals and cereal products - Common wheat (Triticum aestivum L.) - Determination of alveograph properties of dough at adapted hydration from commercial or test flours and test milling methodology | |
| Cereals and cereal products - Durum wheat (T. durum Desf.) - General guidelines for instrumental methods measurement of semolina colour | |
| Characterization of waste Leaching behaviour tests Acid and base neutralization capacity test | |
| CHEESECLOTH; WIPING PURPOSES (REMNANTS AND SECONDS) | |
| CLOTH, POLISHING | |
| CLOTH, TRACING, SENSITIZED | |
| Cloths; Wiping | |
| Communication networks and systems for power utility automation - Part 80-1: Guideline to exchanging information from a CDC-based data model using IEC 60870-5-101 or IEC 60870-5-104 | |
| COMPRESS, GAUZE; AND COMPRESS AND SKULL, HEAD DRESSING, CAMOUFLAGED | |
| COMPRESS, GAUZE; AND, COMPRESS AND SKULL CAP, HEAD DRESSING, CAMOUFLAGED | |
| Conductive charging for electric vehicles - Part 1: D.C. charging station | |
| Conductive charging for electric vehicles - Part 2: Communication protocol between off-board charger and electric vehicle | |
| Continuously Organic Coated (Coil Coated) Steel Flat Products - Part 2: Products for Building Exterior Applications | |
| Copper and copper alloys - Determination of cadmium content - Flame atomic absorption spectrometric method (FAAS) | |
| Copper and copper alloys - Determination of magnesium content - Flame atomic absorption spectrometry method (FAAS) | |
| Copper and copper alloys - Determination of manganese content Part 1: Spectrophotometric method | |
| Copper and copper alloys - Determination of phosphorus content - Spectrophotometric method | |
| Copper and copper alloys - Determination of tellurium content Part 1: Low tellurium content - Flame atomic absorption spectrometric method (FAAS) | |
| Copper and copper alloys. Determination of nickel content. Part 3: Flame atomic absorption spectrometry method (FAAS) | |
| COVER, MATTRESS | |
| CURTAIN, AIRPORT; CURTAIN, DOORWAY; AND CURTAIN FIXTURES | |
| CURTAIN, BEDSIDE, SCREEN | |
| Dense shaped refractory products Part 11: Determination of resistance to thermal shock | |
| Design of fastenings for use in concrete Part 4-1: General | |
| Design of fastenings for use in concrete Part 4-2: Headed Fasteners | |
| Design of fastenings for use in concrete Part 4-3: Anchor channels | |
| Design of fastenings for use in concrete Part 4-4: Post-installed fasteners - Mechanical systems | |
| Design of fastenings for use in concrete Part 4-5: Post-installed fasteners - Chemical systems | |
| Determination of Cadmium in Plastics with the Method of the Wet Decomposition | |
| Determination of the uplift resistance of installed clay and concrete interlocking tiles for roofing Test method for mechanical fasteners | |
| DISH, BIOLOGICAL STAINING, WITH TRAY | |
| DROPCLOTH, PAINTER'S (PLASTIC AND COTTON DUCK) | |
| Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Part 1: Wood held in the storage yard after treatment and wooden... | |
| Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment Part 2: Wooden commodities exposed in Use Class 4 or 5 (in contact... | |
| Durability of wood and wood-based products Determination of the natural durability of solid wood against wood-destroying fungi, test methods Part 1: Basidiomycetes | |
| Durability of wood and wood-based products Determination of the natural durability of solid wood against wood-destroying fungi, test methods Part 2: Soft rotting micro-fungi | |
| Electrical resistance trace heating systems for industrial and commercial applications - Part 2: Application guide for system design, installation and maintenance | |
| Energy management system application program interface (EMS-API) Part 2: Glossary | |
| Evaluation of a.c. corrosion likelihood of buried pipelines Application to cathodically protected pipelines | |
| Execution of steel structures - Part 3: Supplementary rules for high yield strength steels | |
| Execution of Steel Structures - Part 4: Supplementary Rules for Hollow Section Structures | |
| Execution of Steel Structures - Part 6: Supplementary Rules for Stainless Steel | |
| Execution of Steel Structures Part 1: General Rules and Rules for Buildings (Together with United Kingdom National Application Document) | |
| Fertilizers - Determination of chlorides in the absence of organic material | |
| Fertilizers - Determination of cyanamide nitrogen | |
| Fertilizers - Determination of different forms of nitrogen in fertilizers containing nitrogen only as nitric, ammoniacal and urea nitrogen by two different methods | |
| Fertilizers - Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen | |
| Fertilizers - Determination of extracted phosphorus | |
| Fertilizers - Determination of magnesium by atomic absorption spectrometry | |
| Fertilizers - Determination of magnesium by complexometry | |
| Fertilizers - Determination of nitric and ammoniacal nitrogen according to Arnd | |
| Fertilizers - Determination of nitric and ammoniacal nitrogen according to Ulsch | |
| Fertilizers - Determination of sulfates content using three different methods | |
| Fertilizers - Determination of the fineness of grinding of soft natural phosphates | |
| Fertilizers - Determination of the sodium extracted by flame-emission spectrometry | |
| Fertilizers - Determination of total nitrogen in calcium cyanamide containing nitrates | |
| Fertilizers - Determination of total nitrogen in calcium cyanamide nitrate free | |
| Fertilizers - Determination of urea condensates using high-performance liquid chromatography (HPLC) - Isobutylidenediurea and crotonylidenediurea (method A) and methylen-urea oligomers (method B) | |
| Fertilizers - Extraction and determination of elemental sulfur | |
| Fertilizers - Extraction of phosphorus soluble in 2 % citric acid | |
| Fertilizers - Extraction of phosphorus soluble in 2 % formic acid | |
| Fertilizers - Extraction of phosphorus soluble in Joulie's alcaline ammonium citrate | |
| Fertilizers - Extraction of phosphorus soluble in mineral acids | |
| Fertilizers - Extraction of phosphorus which is soluble in neutral ammonium citrate | |
| Fertilizers - Extraction of soluble phosphorus according to Petermann at 65 Degrees C | |
| Fertilizers - Extraction of soluble phosphorus according to Petermann at ambient temperature | |
| Fertilizers - Extraction of total calcium, total magnesium, total sodium and total sulfur in the forms of sulfates | |
| Fertilizers - Extraction of total sulfur present in various forms | |
| Fertilizers - Extraction of water soluble calcium, magnesium, sodium and sulfur in the form of sulfates | |
| Fertilizers - Extraction of water soluble phosphorus | |
| Fertilizers - Extraction of water soluble sulfur where the sulfur is in various forms | |
| Fertilizers - Manganimetric determination of extracted calcium following precipitation in the form of oxalate | |
| Fertilizers Determination of ammoniacal nitrogen | |
| Fertilizers Determination of chelating agents Determination of iron chelated by EDDHSA by ion pair chromatography | |
| Fertilizers Determination of chelating agents Determination of iron chelated by o,p-EDDHA by reversed phase HPLC | |
| Fertilizers Determination of nitric and ammoniacal nitrogen according to Devarda | |
| Fertilizers Determination of the water-soluble potassium content | |
| Fertilizers Determination of total nitrogen in urea | |
| Fertilizers Spectrophotometric determination of biuret in urea | |
| Fire detection and fire alarm systems Part 14: Guidelines for planning, design, installation, commissioning, use and maintenance | |
| Firefighting vehicles and equipment - Symbols for operator controls and other displays | |
| FLAG, NATIONAL, UNITED STATES OF AMERICA AND FLAG, UNION JACK | |
| Flanges and their joints - Design rules for gasketed circular flange connections - Part 3: Calculation method for metal to metal contact type flanged joint | |
| Flanges and their joints - Design rules for gasketed circular flange connections - Part 4: Qualification of personnel competency in the assembly of bolted joints fitted to equipment subject to... | |
| Foodstuffs - Determination of acesulfame-K, aspartame, neohesperidine-dihyd rochalcone and saccharin - High performance liquid chromatographic method | |
| Foodstuffs - Determination of fumonisin B1 and fumonisin B2 in processed maize containing foods for infants and young children - HPLC method with immunoaffinity column cleanup and fluorescence detection after... | |
| Foodstuffs - Determination of trace elements - Determination of tin in fruit and vegetables preserved in cans by flame atomic absorption spectrometry (AAS) | |
| Foodstuffs - HPLC method for the determination of xanthophylls in fish flesh Part 1: Determination of astaxanthin and canthaxanthin | |
| Foodstuffs - HPLC method for the determination of xanthophylls in fish flesh Part 2: Identification of the enantiomer ratio of astaxanthin | |
| Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Sampling strategies | |
| Foodstuffs Determination of trace elements Determination of iodine in dietetic foods by ICP-MS (inductively coupled plasma mass spectrometry) | |
| Furniture - Children's High Chairs for Domestic Use Part 1: Safety Requirements | |
| Furniture - Children's High Chairs for Domestic Use Part 2: Test Methods | |
| Furniture - Classification for properties for furniture surfaces | |
| Furniture Assessment of the surface resistance to abrasion | |
| Furniture Assessment of the surface resistance to scratching | |
| GAUZE, PETROLATUM IMPREGNATED | |
| GOWN, HOSPITAL | |
| Graphical symbols for use on integrated building automation equipment | |
| Guidance on direct and extended application | |
| Guide for in situ measurements In situ measurement of disturbance emission | |
| Guidelines for paving the way for broadband \x93Broadband, 25 Mbit/s and more for All\x94 | |
| HANDKERCHIEF, MAN'S AND WOMAN'S | |
| Health informatics - Clinical knowledge resources - Metadata | |
| Health informatics - Testing of physiological measurement software - Part 1: General | |
| Health informatics Classification of safety risks from health informatics products | |
| Health informatics Mapping of hierarchical message descriptions to XML | |
| Health services Quality management systems Guide for the use of EN ISO 9001:2000 | |
| Heat Exchangers - Liquid Cooled Refrigerant Condensers - Test Procedures for Establishing the Performance | |
| Heat Exchangers - Refrigerant Cooled Liquid Coolers - Test Procedures for Establishing the Performance | |
| Heat Exchangers - Water to Water Heat Exchangers for District Heating - Test Procedure for Establishing the Performance | |
| High-voltage switchgear and controlgear - Part 304: Design classes for indoor enclosed switchgear and controlgear for rated voltages above 1 kV up to and including 52 kV to be used... | |
| Identification card system - Guidance on design for accessible card- activated devices | |
| Identification card systems - European Citizen Card - Part 1: Physical, electrical and transport protocol characteristics | |
| Identification card systems - European Citizen Card - Part 2: Logical data structures and card services | |
| Identification card systems - European Citizen Card Part 3: European Citizen Card Interoperability using an application interface | |
| INSIGNIA, UNIFORM, GSA | |
| Insulating Refractory Products Part 3: Classification of Ceramic Fibre Products | |
| Insulating Refractory Products Part 7: Methods of Test for Ceramic Fibre Products | |
| Intelligent transport systems - DATEX II data exchange specifications for traffic management and information Part 1: Context and framework | |
| Intelligent transport systems - DATEX II data exchange specifications for traffic management and information Part 2: Location referencing | |
| Intelligent transport systems - DATEX II data exchange specifications for traffic management and information Part 3: Situation Publication | |
| Interoperability of Flight Data Processing (Air Traffic Control - Air Traffic Control) for application under the Single European Sky - Interoperability Regulation EC 552/2004 | |
| LABEL: FOR CLOTHING, EQUIPAGE, AND TENTAGE, (GENERAL USE) | |
| Liming materials - Determination of the dust content of granular liming materials before and after simulated handling conditions | |
| Liming materials Guide to the determination of the lime requirement | |
| LINER, LAUNDRY BASKET FRAME | |
| Live working Flame-resistant materials for clothing for thermal protection of workers Thermal hazards of an electric arc Part 1: Test methods | |
| Long duration storage of electronic components - Specification for implementation | |
| Low voltage d.c. surge protective device for traction systems - Selection and application rules for surge arresters | |
| Low-voltage surge protective devices - Surge protective devices for specific application including d.c. Part 12: Selection and application principles - SPDs connected to photovoltaic installations | |
| Low-voltage surge protective devices - Surge protective devices for specific application including d.c. Part 22: Selection and application principles - Wind turbine applications | |
| Low-voltage surge protective devices Part 12: Surge protective devices connected to low-voltage power systems Selection and application principles | |
| Low-voltage surge protective devices Part 22: Surge protective devices connected to telecommunications and signalling networks Selection and application principles | |
| MASK, SURGICAL | |
| Materials and Articles in Contact with Foodstuffs - Plastics Part 10: Test Methods for Overall Migration into Olive Oil (Modified Method for Use in Cases Where Incomplete Extraction of Olive... | |
| Materials and Articles in Contact with Foodstuffs - Plastics Part 11: Test Methods for Overall Migration into Mixtures of 14C-Labelled Synthetic Triglycerides | |
| Materials and Articles in Contact with Foodstuffs - Plastics Part 12: Test Methods for Overall Migration at Low Temperatures | |
| Materials and Articles in Contact with Foodstuffs - Plastics Part 1: Guide to the Selection of Conditions and Test Methods for Overall Migration | |
| MATS, FLOOR (COIR FIBER) | |
| Medical informatics - Healthcare information interchange - Registration of coding schemes | |
| Methods of test for masonry units Part 22: Determination of freeze/thaw resistance of clay masonry units | |
| Micrographic Examination of the Nonmetallic Inclusion Content of Steels Using Standard Pictures | |
| Mounting and fixing in reaction to fire tests under the Construction Products Directive | |
| Non-destructive testing - Recommendations for discontinuities-type s in test specimens for examination | |
| Open data communication in building automation, controls and building management Mapping between Lonworks and BACnet | |
| Optical fibre cables Drinking water pipe cables Family specification for cables to be installed in drinking water pipes | |
| Optical fibre cables Gas pipe cables Family specification for cables to be installed in high pressure gas pipes | |
| Optical fibre cables Sewer cables Family specification for cables to be installed in storm and sanitary sewers | |
| PACK, GAUZE, ABDOMINAL | |
| Packaging - Ease of opening - Criteria and test methods for evaluating consumer packaging | |
| PAD, BED LINEN PROTECTIVE | |
| PAD, CLOTH, COPPER-SULFATE IMPREGNATED | |
| Pad, Cloth, Copper-Sulfate Impregranted | |
| PAD, IRONING BOARD, COTTON | |
| PAD, MATTRESS, POLYESTER BATTING, QUILTED, FLAT OR FITTED | |
| PAD, SANITARY | |
| PAD, TYPEWRITER, FELT | |
| PADS GAUZE, GAUZE AND COTTON, AND GAUZE CELLULOSE AND COTTON | |
| Parquet flooring - General guideline for installation | |
| PILLOWCASE, COTTON AND POLYESTER/COTTON | |
| Plastics - Determination of bio-based carbon content | |
| Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) Part 2: Guidance for the assessment of conformity | |
| Plastics piping systems for non-pressure underground drainage and sewerage Polypropylene (PP) Part 3: Guidance for installation | |
| Plastics piping systems for the supply of gaseous fuels Polyethylene (PE) Part 7: Guidance for the assessment of conformity | |
| Plywood - Biological Durability - Guidance for the Assessment of Plywood for Use in Different Hazard Classes | |
| Plywood - Classification by surface appearance - Part 4: Parameters of ability for finishing, guideline | |
| Postal service - Statement of mailing submission | |
| Postal services - DPM infrastructure - Messages supporting DPM applications | |
| Postal Services - Hybrid Mail Part 1: Secured electronic postal services (SePS) interface specification - Concepts, schemas and operations | |
| Postal Services - Hybrid Mail Part 2: Secured electronic postal services (SePS) interface specification - ECPM Service | |
| Postal services - ID-tagging of letter mail items Part 1: ID-tag structure, message and binary | |
| Postal services - ID-tagging of letter mail items Part 2: BNB-78 Encoding Specification | |
| Postal services - ID-tagging of letter mail items Part 3: BNB-62 encoding specification | |
| Postal services - ID-tagging of letter mail items Part 4: State encoding specification for flats | |
| Postal services - ID-tagging of letter mail items Part 5: 4-state encoding specification for small letters | |
| Postal services - Open Interface between Machine Control and Reading Coding System - MC/RC-Interface | |
| Postal Services - Open Standard Interface - Address Data File Format for OCR/VCS Dictionary Generation | |
| Postal services - Quality of service - Information available on postal services | |
| Postal services - Standard Interfaces - Interface between Machine Control and Bar Code Printers | |
| Postal services Open standard interface between image controller and enrichment devices (OCRs, video coding systems, voting systems) | |
| Prefabricated timber stairs - Mechanical test methods | |
| Pressure equipment - Part 6: Structure and content of operating instructions | |
| Protective clothing Hand, arm, leg, genital and neck protectors for use in ice hockey Protectors for players other than goalkeepers Requirements and test methods | |
| Public transport - Road vehicles - Visible variable passenger information devices inside the vehicle | |
| Public transport - Service interface for real-time information relating to public transport operations - Part 1: Context and framework | |
| Public transport - Service interface for real-time information relating to public transport operations - Part 2: Communications infrastructure | |
| Public transport - Service interface for real-time information relating to public transport operations - Part 3: Functional service interfaces | |
| Public transport - Service interface for real-time information relating to public transport operations Part 4: Functional service interfaces: Facility Monitoring | |
| Public transport - Service interface for real-time information relating to public transport operations Part 5: Functional service interfaces - Situation Exchange | |
| Qualification of electrical installation contractors | |
| RAGS, WIPING COTTON AND COTTON-SYNTHETIC | |
| Railway applications - Compatibility between rolling stock and train detection systems - Part 3: Compatibility with axle counters | |
| Railway applications - Compatibility between rolling stock and train detection systems Part 2: Compatibility with track circuits | |
| Railway applications - Fire protection on railway vehicles Part 1: General | |
| Railway applications - Fire protection on railway vehicles Part 2: Requirements for fire behaviour of materials and components | |
| Railway applications - Fire protection on railway vehicles Part 3: Fire resistance requirements for fire barriers | |
| Railway applications - Fire protection on railway vehicles Part 4: Fire safety requirements for railway rolling stock design | |
| Railway applications - Fire protection on railway vehicles Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles | |
| Railway applications - Fire protection on railway vehicles Part 6: Fire control and management systems | |
| Railway applications - Fire protection on railway vehicles Part 7: Fire safety requirements for flammable liquid and flammable gas installations | |
| Railway applications - Fixed installations - Process, measures and demonstration of safety for electric traction systems | |
| Railway applications - Generic system architectures for onboard electric auxiliary power systems | |
| Railway applications - Mounted parts of the traction transformer and cooling system Part 1: HV bushing for traction transformers | |
| Railway applications - Mounted parts of the traction transformer and cooling system Part 2: Pump for insulating liquid for traction transformers and reactors | |
| Railway applications - Mounted parts of the traction transformer and cooling system Part 3: Water pump for traction converters | |
| Railway applications - Mounted parts of the traction transformer and cooling system Part 4: Gas and liquid actuated (Buchholz) relay for liquid immersed transformers and reactors with conservator for rail... | |
| Railway applications - Onboard auxiliary power converter systems | |
| Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and connection systems | |
| Railway applications - Rolling stock - Electrical connectors, requirements and test methods | |
| Railway applications - Rolling stock - Pantographs: Characteristics and tests Part 3: Interface between pantograph and rolli ng stock for rail vehicles | |
| Railway applications - Wheelsets and bogies - Product requirements for cast wheels | |
| Railway applications Communication, signalling and processing systems European Rail Traffic Management System Driver-Machine Interface Part 1: Ergonomic principles for the presentation of ERTMS/ETCS/GSM-R information | |
| Railway applications Communication, signalling and processing systems European Rail Traffic Management System Driver-machine Interface Part 2: Ergonomic arrangements of ERTMS/ETCS information | |
| Railway applications Communication, signalling and processing systems European Rail Traffic Management System Driver-Machine Interface Part 3: Ergonomic arrangements of ERTMS/GSM-R information | |
| Railway applications Communication, signalling and processing systems European Rail Traffic Management System Driver-Machine Interface Part 4: Data entry for the ERTMS/ETCS/GSM-R systems | |
| Railway applications Communication, signalling and processing systems European Rail Traffic Management System Driver-Machine Interface Part 5: Symbols | |
| Railway applications Communication, signalling and processing systems European Rail Traffic Management System Driver-Machine Interface Part 6: Audible information | |
| Residential solid fuel burning appliances - Emission test methods | |
| Resilient, textile and laminate floor coverings - Floor covering standard symbols | |
| RIBBON, ACCOUNTING | |
| RIBBONS, TYPEWRITER FABRIC HECTOGRAPH | |
| RIBBONS, TYPEWRITER | |
| RIBBONS; COMPUTING AND RECORDING MACHINES | |
| Road and airfield surface characteristics Part 6: Procedure for determining the skid resistance of a pavement surface by measurement of the sideway force coefficient (SFCS): SCRIM | |
| Road and airfield surface characteristics Part 7: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal fixed slip ratio (LFCG): the GripTester | |
| Road service area maintenance equipment Part 3: Classification | |
| Road transport and traffic telematics - After-theft services for the recovery of stolen vehicles Part 6: Test procedures | |
| Road transport and traffic telematics - ESafety - ECall minimum set of data (MSD) | |
| Road transport and traffic telematics - Public transport - Identification of fixed objects in public transport | |
| Road transport and traffic telematics After-theft systems for the recovery of stolen vehicles Part 1: Reference architecture and terminology | |
| Road transport and traffic telematics After-theft systems for the recovery of stolen vehicles Part 2: Common status message elements | |
| Road transport and traffic telematics After-theft systems for the recovery of stolen vehicles Part 3: Interface and system requirements for short range communication | |
| Road transport and traffic telematics After-theft systems for the recovery of stolen vehicles Part 4: Interface and system requirements for long range communication | |
| Road transport and traffic telematics After-theft systems for the recovery of stolen vehicles Part 5: Messaging interface | |
| Rotating electrical machines Part 18-33: Functional evaluation of insulation systems - Test procedures for form-wound windings - Multifactor evaluation by endurance under simultaneous thermal and electrical stresses | |
| Rotating electrical machines Part 18-34: Functional evaluation of insulation systems Test procedures for form-wound windings Evaluation of thermomechanical endurance of insulation systems | |
| Rotating electrical machines Part 18-42: Qualification and acceptance tests for partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters | |
| Rotating electrical machines Part 20-1: Control motors Stepping motors | |
| Rotating electrical machines Part 24: Online detection and diagnosis of potential failures at the active parts of rotating electrical machines and of bearing currents - Application guide | |
| Rotating electrical machines Part 25: Guide for the design and performance of cage induction motors specifically designed for converter supply | |
| Rotating electrical machines Part 27: Off-line partial discharge measurements on the stator winding insulation of rotating electrical machines | |
| Rotating electrical machines Part 31: Selection of energy-efficient motors including variable speed applications - Application guide | |
| Safety aspects for xDSL signals on circuits connected to telecommunication networks (DSL: Digital Subscriber Line) | |
| Safety of Machinery - Terminology | |
| Safety of machinery Electro-sensitive protective equipment Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPD) | |
| Safety of machinery Electro-sensitive protective equipment Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR) | |
| Safety of machinery Electro-sensitive protective equipment Passive infra-red protective devices (PIPDs) | |
| Safety of machinery. Application of protective equipment to detect the presence of persons | |
| Safety rules for the construction and installation of lifts - Basics and interpretations Part 11: Interpretations related to EN 81 family of standards | |
| Safety rules for the construction and installation of lifts - Existing lifts Part 82: Improvement of the accessibility of existing lifts for persons including persons with disability | |
| Safety rules for the construction and installation of lifts - Existing lifts Part 83: Rules for the improvement of the resistance against vandalism | |
| Safety rules for the construction and installation of lifts - Particular applications for passengers and goods passenger lifts - Part 76: Evacuation of disabled persons using lifts | |
| Safety rules for the construction and installation of lifts Lifts for the transport of persons and goods Part 29: Interpretations related to EN 81-20 up to EN 81-28 | |
| Seamless and Welded Steel Tubes - Dimensions and Masses per Unit Length | |
| SHADE, ROLLER, WINDOW, ROLLER, SLAT, CORD, AND ACCESSORIES | |
| SHIRT, MAN'S, COTTON, BROADCLOTH, MERCERIZED | |
| SHIRTS, POPLIN, COTTON, MERCERIZED (SHORT SLEEVE, SPORT COLLAR) | |
| SMOCK, MAN'S; GENERAL PURPOSE | |
| Solar photovoltaic energy systems - Terms, definitions and symbols | |
| Solid biofuels - Method for the determination of ash melting behaviour - Part 1: Characteristic temperatures method | |
| Solid Biofuels Calculation of analyses to different bases | |
| Solid Biofuels Determination of major elements | |
| Solid Biofuels Determination of minor elements | |
| Solid biofuels Determination of total content of carbon, hydrogen and nitrogen Instrumental methods | |
| Solid biofuels Determination of total content of sulphur and chlorine | |
| Solid biofuels Fuel quality assurance | |
| Solid biofuels Method for the determination of the content of volatile matter | |
| Solid biofuels Methods for determination of the water soluble content of chloride, sodium and potassium | |
| Solid biofuels Methods for the determination of bulk density | |
| Solid biofuels Methods for the determination of mechanical durability of pellets and briquettes Part 1: Pellets | |
| Solid biofuels Methods for the determination of mechanical durability of pellets and briquettes Part 2: Briquettes | |
| Solid biofuels Methods for the determination of particle density | |
| Solid biofuels Methods for the determination of particle size distribution Part 1: Oscillating screen method using sieve apertures of 3,15 mm and above | |
| Solid biofuels Methods for the determination of particle size distribution Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below | |
| Solid biofuels Methods for the determination of particle size distribution Part 3: Rotary screen method | |
| Solid recovered fuels - 14C-based methods for the determination of the biomass content | |
| Solid recovered fuels - Determination of potential rate of microbial self heating using the real dynamic respiration index | |
| Solid recovered fuels - Method for the determination of biomass content | |
| Solid recovered fuels - Methods for laboratory sample preparation | |
| Solid recovered fuels - Methods for sampling | |
| Solid recovered fuels - Methods for the determination of mechanical durability of pellets | |
| Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels | |
| Solid recovered fuels - Terminology, definitions and descriptions | |
| Solid recovered fuels Determination of moisture content using the oven dry method Part 1: Determination of total moisture by a reference method | |
| Solid recovered fuels Determination of moisture content using the oven dry method Part 2: Determination of total moisture by a simplified method | |
| Solid recovered fuels Determination of moisture content using the oven dry method Part 3: Moisture in general analysis sample | |
| Solid recovered fuels Determination of particle size distribution by screen method | |
| Solid recovered fuels Method for the determination of carbon (C), hydrogen (H) and nitrogen (N) content | |
| Solid recovered fuels Method for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti) | |
| Solid recovered fuels Methods for the determination of ash content | |
| Solid recovered fuels Methods for the determination of ash melting behaviour by using characteristic temperatures | |
| Solid recovered fuels Methods for the determination of bridging properties of bulk material | |
| Solid recovered fuels Methods for the determination of bulk density | |
| Solid recovered fuels Methods for the determination of calorific value | |
| Solid recovered fuels Methods for the determination of density of pellets and briquettes | |
| Solid recovered fuels Methods for the determination of metallic aluminium | |
| Solid recovered fuels Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content | |
| Solid recovered fuels Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and... | |
| Solid recovered fuels Methods for the determination of the content of volatile matter | |
| Solid recovered fuels Methods for the preparation of the test sample from the laboratory sample | |
| Solid Recovered Fuels Specifications and Classes | |
| Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs | |
| Steel for the Reinforcement of Concrete - Weldable Ribbed Reinforcing Steel B500 - Technical Delivery Conditions for Bars, Coils and Welded Fabric | |
| STITCHES, SEAMS, AND STITCHING | |
| Surfaces for sports areas Determination of resistance of synthetic sports surfaces to repeated impact | |
| Tactile paving surface indicators produced from concrete, clay and stone | |
| TAPE, TEXTILE, COTTON, GENERAL PURPOSE, (UNBLEACHED, BLEACHED, OR DYED) | |
| Test Method for Glass-Fibre Reinforced Cement Part 8: Cyclic Weathering Type Test | |
| Thermal insulation products for building equipment and industrial installations - Determination of thermal resistance by means of the guarded hot plate method - Part 1: Measurements at elevated temperatures from... | |
| Thermal Modified Timber - Definitions and characteristics | |
| TOWEL, BATH, COTTON, TERRY | |
| TOWEL, HAND; AND CLOTH HUCK COTTON | |
| TOWEL, MACHINERY WIPING (LAUNDERED) | |
| TOWELS, DISH AND DISHCLOTHS (CRASH, COTTON, AND COTTON AND LINEN-MIXED): CLOTH, CRASH, COTTON | |
| Use of LED signal heads in road traffic signal systems | |
| WASHCLOTH, TERRY, COTTON | |
| WASTE, MATTED YARNS | |
| Winter and road service area maintenance equipment - Solid absorbents intended for road usage | |
| Winter maintenance equipment - Spreading machines (gritting machines) Part 2: Requirements for distribution and its test | |
| WIPING CLOTHS, COTTON | |
| Wood flooring - Slip resistance - Pendulum test | |
| Wood Preservatives - Creosote and Creosoted Timber - Methods of Sampling and Analysis Part 3: Determination of the Benzo(a)pyrene Content of Creosote | |
| Wood preservatives - Determination of the preventive effectiveness against sapstain fungi and mould fungi on freshly sawn timber - Field test | |
| Wood preservatives - Determination of the protective effectiveness against wood destroying basidiomycetes - Application by surface treatment | |
| Wood preservatives Method for natural preconditioning out of ground contact of treated wood specimens prior to biological laboratory test | |
| Wood-Based Panels - Determination of Duration of Load and Creep Factors | |
| Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products | |
| Wood-plastics composites (WPC) - Part 2: Characterisation of WPC materials | |
| Wood-plastics composites (WPC) - Part 3: Characterisation of WPC products | |
| Workplace exposure - Measurement of dermal exposure - Principles and methods | |
| WRAPPERS, STERILIZATION, COTTON CLOTH, GREEN |
| << Prev | Next >> |