Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
150
200
250
300
350
400
440
450
460
470
480
490
499
500
501
502
503
504
505
506
507
508
509
510
511
520
530
540
550
560
570
600
650
700
750
800
850
1000
1500
1620
| Product Name | Notes |
|---|---|
| ADAPTER, LUER NEEDLE, GLASS | |
| Advanced technical ceramics - Methods of test for ceramic coatings - Part 11: Determination of internal stress by the Stoney formula | |
| Advanced technical ceramics - Notations and symbols | |
| Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 5: Single-edge vee-notch beam (SEVNB) method | |
| Advanced technical ceramics Ceramic composites Thermophysical properties Part 4: Determination of thermal conductivity | |
| Advanced technical ceramics Methods of test for ceramic coatings Part 10: Determination of coating thickness by cross sectioning | |
| Advanced technical ceramics Methods of test for ceramic coatings Part 8: Rockwell indentation test for evaluation of adhesion | |
| Advanced technical ceramics Methods of test for ceramic coatings Part7: Determination of hardness and Young's modulus by instrumented indentation testing | |
| Advanced technical ceramics Test methods for determination of fracture toughness of monolithic ceramics Part 1: Guide to test method selection | |
| Advanced technical ceramics Test methods for determination of fracture toughness of monolithic ceramics Part 3: Chevron notched beam (CNB) method | |
| Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling Testing and rating at part load conditions | |
| Air supported structures | |
| Animal feeding stuffs - Determination of the content of fatty acids - Part 1: Preparation of methyl esters | |
| Animal feeding stuffs - Determination of the content of fatty acids - Part 2: Gas chromatographic method | |
| Assessment of Reliability of Systems Containing Software | |
| Assessment of the Composition of Fresh Concrete | |
| Assessment of the potential for metallic materials to affect adversely the quality of water intended for human consumption - Specification | |
| Automated processing of mail items Automatic identification of receptacles and containers Receptacle asset numbering | |
| Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 3: Vehicle data | |
| Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 4: Secure communications using asymmetrical techniques | |
| Automatic vehicle and equipment identification Intermodal goods transport Numbering and data structures | |
| Automatic vehicle and equipment identification Intermodal goods transport System parameters | |
| AWWA DUCTILE-IRON PIPE SET | |
| Basic Data for the Design of Buildings: Daylight | |
| Basic Data for the Design of Buildings: Sunlight | |
| Basic reference model for open systems interconnection: connectionless-mode transmission | |
| BATH, EYE | |
| BOTTLE, ASPIRATOR, 4-LITER CAPACITY | |
| BOTTLE, INFUSION, KELLY, 700CC | |
| BOTTLE, STERILE FLUID STORAGE | |
| BOTTLE, STOPPER, GROUND-GLASS CAP | |
| BOTTLE, STOPPER, MILK DILUTION, 160 MILLILITERS | |
| BOTTLE, STOPPER, NARROW MOUTH, ROUND | |
| BOTTLE, STOPPER, VACCINE, ROUND AND STOPPER, BOTTLE, RUBBER | |
| BOTTLES AND JARS, GLASS, PRESCRIPTION DISPENSING | |
| Building Construction Machinery and Equipment - Classification | |
| Building Hardware, Fittings for Windows and Door Height Windows - Requirements and Test Methods - Part 2: Casement Fastener Handles | |
| Building hardware, fittings for windows and door height windows Requirements and test methods - Part 1: Requirements Common to all Types of Fittings | |
| Building hardware, fittings for windows and door height windows Requirements and test methods Part 10: Arm balancing systems | |
| Building hardware, fittings for windows and door height windows Requirements and test methods Part 11: Top hung projecting reversible hardware | |
| Building hardware, fittings for windows and door height windows Requirements and test methods Part 12: Side-hung projecting reversible hardware | |
| Building hardware, fittings for windows and door height windows Requirements and test methods Part 13: Sash balances | |
| Building hardware, fittings for windows and door height windows Requirements and test methods Part 14: Sash fasteners | |
| Building hardware, fittings for windows and door height windows Requirements and test methods Part 15: Rollers | |
| Building hardware, fittings for windows and door height windows Requirements and test methods Part 16: Fittings for lift and slide systems | |
| Building hardware, fittings for windows and door height windows Requirements and test methods Part 17: Fittings for tilt and slide systems | |
| Building hardware, fittings for windows and door height windows Requirements and test methods Part 3: Manoeuvring fittings for espagnolette bolts/sliding button | |
| Building hardware, fittings for windows and door height windows Requirements and test methods Part 4: Espagnolette bolts | |
| Building hardware, fittings for windows and door height windows Requirements and test methods Part 5: Devices that restrict the opening of windows | |
| Building hardware, fittings for windows and door height windows Requirements and test methods Part 6: Variable geometry stay hinges (with or without a friction system) | |
| Building hardware, fittings for windows and door height windows Requirements and test methods Part 7: Finger catches | |
| Building hardware, fittings for windows and door height windows Requirements and test methods Part 8: Tilt & turn, Tilt-First and Turn-Only hardware | |
| Building hardware, fittings for windows and door height windows Requirements and test methods Part 9: Pivot hinges | |
| Calcium silicate bricks with modular dimensions | |
| Characterisation of waste Leaching behaviour tests Influence of pH on leaching with initial acid/base addition | |
| Characterization of waste Leaching behaviour tests Influence of pH on leaching with continuous pH-control | |
| Characterization of waste Leaching behaviour tests Up-flow percolation test (under specified conditions) | |
| Classification System for Sealants for Building and Construction | |
| Clay bricks with modular dimensions | |
| Code of Practice for Exterior Deterrent Systems | |
| Code of practice for fire safety in the design, construction and use of buildings | |
| Code of Practice for Intruder Alarm Systems for High Security Areas | |
| Code of Practice for Intruder Alarm Systems Signalling to Alarm Receiving Centres | |
| Code of Practice for Management of False Alarms | |
| Code of Practice for Strength Assessment of Members of Lattice Towers and Masts | |
| Code of Practice for the Identification of Potentially Contaminated Land and Its Investigation | |
| Code of Practice for Wire-Free Interconnections within Intruder Alarms | |
| Code of Practice Gaseous Fire Fighting Systems | |
| Components for Residential Sprinkler Systems Specification and Test Methods for Residential Sprinklers | |
| Computer graphics: Graphical Kernal System (GKS) language bindings. PASCAL (ISO/DP 8651/2) | |
| Computer graphics: Graphical Kernel System (GKS) language bindings. Ada (ISO DP 8651/3) | |
| Computer graphics: Graphical Kernel System (GKS) language bindings. FORTRAN | |
| Computer graphics: metafile for the storage and transfer of picture description information. Functional specification (ISO/DIS 8632/1) | |
| Computer Graphics: Procedures for Registration of Graphical Items | |
| Computer Integrated Manufacturing (CIM): CIM Systems Architecture Framework for Modelling | |
| ControlNet Part 10: Object Library | |
| ControlNet Part 1: General Description | |
| ControlNet Part 2: Physical Layer and Media | |
| ControlNet Part 3: Data Link Layer | |
| ControlNet Part 4: Network and Transport Layer | |
| ControlNet Part 5: Data Management | |
| ControlNet Part 6: Object Model | |
| ControlNet Part 7: Device Profiles | |
| ControlNet Part 8: Electronic Data Sheet | |
| ControlNet Part 9: Station Management | |
| Cookware Domestic cookware for use on top of a stove, cooker or hob Part 2: Further general requirements and specific requirements for ceramic, glass and glass ceramic cookware | |
| Copper and copper alloys - Compendium of compositions and products | |
| Copper and copper alloys - Determination of chromium content Part 1: Titrimetric method | |
| Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometry method (FAAS) | |
| Copper and copper alloys - Determination of tin content Part 2: Spectrophotometric method | |
| Copper and copper alloys Determination of bismuth content Part 2: FAAS method | |
| Cranes - Condition monitoring - Specification for data logging equipment | |
| Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems | |
| Cranes - General design Part 3-5: Limit states and proof of competence of forged hooks | |
| Cranes General design Part 3.1: Limit states and proof of competence of steel structures | |
| Crime Reduction Measures for Holiday Resorts and Accommodation - Guidance and Recommendations | |
| Criteria for the assessment of conformity of a lot of sawn timber | |
| CSMA/CD Local Area Network Part 2: Guidance for Implementors | |
| CUP, GLASS; PIN, CLIP, AND SPONGE | |
| Curing compounds - Test methods - Part 1: Determination of water retention efficiency of common curing compounds | |
| Damp-Proof Courses Part 1: Methods of Test for Flexural Bond Strength and Short Term Shear Strength | |
| Damp-Proof Courses Part 2: Method of Test for Creep Deformation | |
| Damp-proof courses Part 3: Guide to characteristic strengths of damp-proof course material used in masonry | |
| Database Language NDL | |
| Database language SQL (ISO/DIS 9075) | |
| Decorative Division White Paper on the Relevance of Decorative and Mirror Glass Products to the U. S. Green Building Council Leadership in Energy & Environmental Design Rating System | |
| Definition of additional control functions for character-imaging devices for information processing, using extended ISO 7-bit and 8-bit coded character sets | |
| Design of accessible housing - Lifetime home - Code of practice | |
| Design Requirements for Access Scaffolds | |
| Designation System for Steel: Additional Symbols for Steel Names (ECISS Information Circular 10) | |
| Determination of Anti-Wear Properties of Hydraulic Fluids Using the Oscillating Pin on Rotating Disc Method | |
| Determination of Exposure Limits, Recovery Times and Relaxation Times in Work Measurement | |
| Determination of Static Electrical Propensity of Textile Floor Coverings: 'Walking' Test | |
| Determination of the hot storage stability of modified bitumen binders | |
| Determination of Threshold Stress Intensity Factors and Fatigue Crack Growth Rates in Metallic Materials | |
| Dezincification Resistant Brass Die Castings and Ingots for Die Castings | |
| Documentation - Vocabulary | |
| Draft for Development Data Logging and Remote Monitoring Equipment for Lifts, Escalators and Passenger Conveyors | |
| Dynamic Force Calibration of Axial Load Fatigue Testing Machines by Means of a Strain Gauge Technique | |
| Electrical static meters for secondary metering and sub-metering Specification | |
| Electrochemical re-alkalization and chloride extraction treatments for rein-forced concrete Part 2: Chloride extraction | |
| Electrochemical realkalization and chloride extraction treatments for reinforced concrete - Part 1: Realkalization | |
| Electronic fee collection - Application interface definition for autonomous systems Part 1: Charging | |
| Electronic fee collection - Application interface definition for autonomous systems Part 2: Communication and connection to the lower layers | |
| Electronic fee collection - Application interface definition for autonomous systems Part 3: Context data | |
| Electronic fee collection - Application interface definition for autonomous systems Part 4: Roaming | |
| Electronic fee collection - Compliance check communication for autonomous systems | |
| Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-1 Part 1: Test suite structure and test purposes | |
| Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-3 Part 1: Test suite structure and test purposes | |
| Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 12813 Part 1: Test suite structure and test purposes | |
| Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 13141 Part 1: Test suite structure and test purposes | |
| Electronic fee collection - Interface definition for onboard account using integrated circuit card (ICC) | |
| Electronic fee collection - Localisation augmentation communication for autonomous systems | |
| Electronic fee collection. Evaluation of on-board and roadside equipment for conformity to ISO/TS 12813. Abstract test suite | |
| Electronic Funds Transfer at Point of Sale (EFT-POS) Conceptual Framework Part 1: Guide to Roles, Entities and Relationships | |
| Electronic Funds Transfer at Point of Sale (EFT-POS) Conceptual Framework Part 2: Guide to EFT-POS System Description | |
| Ergonomic Principles in the Design of Work Systems | |
| Estate agency services - Residential property sales - Specification for the provision of the service | |
| Explosives for civil uses Detonators and relays Part 27: Definitions, methods and requirements for electronic initiation systems | |
| Fences - Part 18: Specification for steel mesh site perimeter temporary fencing systems | |
| Fieldbus Part 1: Guide to System Architecture | |
| Fieldbus Part 2: Specification for 31.25 kbit/s Physical Layer Profile | |
| Fieldbus Part 3: Specification for Data Link Services Subset | |
| Fieldbus Part 4: Specification for Data Link Protocol | |
| Fieldbus Part 5: Specification for Fieldbus Access Sublayer (Services and Protocol) | |
| Fieldbus Part 6: Fieldbus Message Specification | |
| Fieldbus Part 7: Fieldbus Management Section 7.1: Specification for System Management | |
| Fieldbus Part 7: Fieldbus Management Section 7.2: Specification for Network Management | |
| Fieldbus Specification Part 1: System Architecture | |
| Fieldbus Specification Part 2: Network Management | |
| Fieldbus Specification Part 3: Data Link Layer Services Subset | |
| Fieldbus Specification Part 4: Data Link Protocol Specification | |
| Fieldbus Specification Part 5: Fieldbus Message Specification | |
| Fieldbus Specification Part 6: Fieldbus Access Sublayer (Services and Protocol) | |
| Filters for Mains Signalling Systems | |
| Fire Safety Engineering in Buildings Part 1: Guide to the Application of Fire Safety Engineering Principles | |
| Fire Safety Engineering in Buildings Part 2: Commentary on the Equations Given in Part 1 | |
| Fireworks - Selection packs - Specification | |
| Fixed fire protection systems - Industrial and commercial watermist systems - Part 1: Code of practice for design and installation | |
| Fixed fire protection systems - Industrial and commercial watermist systems - Part 5: Tests and requirements for watermist systems for the protection of combustion turbines and machinery spaces with volumes... | |
| Fixed fire protection systems - Industrial and commercial watermist systems - Part 6: Tests and requirements for watermist systems for the protection of industrial oil cookers | |
| Fixed fire protection systems - Industrial and commercial watermist systems - Part 7: Tests and requirements for watermist systems for the protection of low hazard occupancies | |
| Fixed fire protection systems - Industrial and commercial watermist systems Part 4: Tests and requirements for watermist systems for local applications involving flammable liquid fires | |
| Fixed fire protection systems - Residential and domestic watermist systems - Part 1: Code of practice for design and installation | |
| Fixed firefighting systems - Water spray systems - Design, installation and maintenance | |
| Flammability Spray Test for Hydraulic Fluids | |
| Food products - Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content Part 2: Cereals, pulses and milled cereal... | |
| Foodstuffs Determination of neohesperidin-dihydr ochalcon | |
| Footwear - Critical substances potentially present in footwear and footwear components - Determination of phthalates in footwear materials | |
| Fume cupboards - Part 5: Recommendations for installation and maintenance | |
| General Guidance for the Marking of Gas Appliances | |
| Geographic information - Metadata - XML schema implementation | |
| Geometrical Product Specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or standards | |
| Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form | |
| Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators | |
| Geometrical product specifications (GPS) - Flatness Part 1: Vocabulary and parameters of flatness | |
| Geometrical Product Specifications (GPS) - Flatness Part 2: Specification operators | |
| Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification | |
| Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment Part 3: Guidelines for achieving agreements on measurement uncertainty statements | |
| Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment Part 4: Background on functional limits and specification limits in decision rules | |
| Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators | |
| Geometrical product specifications (GPS) - Roundness Part 1: Vocabulary and parameters of roundness | |
| Geometrical product specifications (GPS) - Straightness Part 1: Vocabulary and parameters of straightness | |
| Geometrical Product Specifications (GPS) - Straightness Part 2: Specification operators | |
| Geosynthetic barriers Test method for determining the resistance to roots | |
| Geosynthetic barriers Test method for the determination of the influence of freezingthawing cycles on the permeability of clay geosynthetic barriers | |
| Geosynthetic barriers Test method for the determination of the influence of wetting-drying cycles on the permeability of clay geosynthetic barriers | |
| Geotechnical investigation and testing - Field testing - Part 11: Flat dilatometer test | |
| Geotechnical investigation and testing - Laboratory testing of soils Part 6: Fall cone test | |
| Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 2: Qualification criteria for enterprises and personnel | |
| Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 3: Conformity assessment of enterprises and personnel by third party | |
| Glossary of Terms Used in Computer-Assisted Publishing | |
| Grading Polished Diamonds - Terminology and Classification | |
| Guidance for forming of structural steels in processing | |
| Guidance on dimensional co-ordination in building. A selected bibliography | |
| Guidance on dimensional co-ordination in building. Basis of dimensional co-ordination | |
| Guidance on dimensional co-ordination in building. Communication | |
| Guidance on dimensional co-ordination in building. Dimensionally co- ordinated products in British Standards | |
| Guidance on dimensional co-ordination in building. Introduction | |
| Guidance on dimensional co-ordination in building. Size and location of components | |
| Guidance on dimensional co-ordination in building. Summary | |
| Guide for a Modular Approach to Software Construction, Operation and Test (MASCOT) | |
| Guide for the Assessment of Toxic Hazards in Fire in Buildings and Transport | |
| Guide to a Framework for User Requirements for Information Technology | |
| Guide to In-Vehicle Information Systems | |
| Guide to Specifying Performance Requirements for Hinged or Pivoted Doors (Including Test Methods) | |
| Guide to sprayed mineral insulation. Sprayed mineral fibre | |
| Guide to the evaluation of exposure of the human hand-arm system to vibration | |
| Guide to the evaluation of human exposure to whole-body vibration | |
| Guide to the safety aspects of human vibration experiments | |
| Guide to use of asbestos-based electrical insulating materials | |
| Health and safety in welding and allied processes Laboratory method for sampling fume and gases Part 5: Identification of thermaldegradation products generated when welding or cutting through products composed wholly... | |
| Health informatics - General purpose information components - Part 4: Message headers | |
| Health informatics A syntax to represent the content of medical classification systems (CIaML) | |
| Health Informatics Data Types | |
| Health informatics File exchange format for vital signs | |
| Hose tail and ferrule for crimping and swaging | |
| Human reliability - Guide to the fundamental considerations | |
| Hydraulic Couplings Part 1: Method of Test for Coupling Port Threads and Their Seals Intended for Use in Fluid Power Systems | |
| Hydraulic Couplings Part 2: Method of Test for Couplings Intended for Use in Fluid Power Systems | |
| Hydrometric uncertainty guidance | |
| Industrial Automation: Shop Floor Production Part 1: Reference Model for Standardization and a Methodology for Identification of Requirements | |
| Industrial Automation: Shop Floor Production Part 2: Application of the Reference Model for Standardization and Methodology | |
| Industrial valves - Copper alloy ball valves | |
| Inhalational nitric oxide systems Part 1: Delivery systems | |
| Inhalational nitric oxide systems Part 2: Supply systems | |
| Intelligent transport systems Automatic vehicle and equipment identification Intermodal goods transport architecture and terminology | |
| Intruder and hold-up alarm systems - Commissioning, maintenance and remote support - Code of practice | |
| Laboratory apparatus. Vocabulary relating to apparatus made essentially from glass, porcelain or vitreous silica. Names for items of apparatus | |
| Laminated and finger jointed timber blanks and semi-finished profiles for nonstructural uses Part 2: Production control | |
| Leather - Upholstery leather characteristics - Guide for the selection of leather for automotive | |
| Leather Chemical tests Determination of certain azo colourants in dyed leathers | |
| Leather Chemical tests Determination of chromium VI content | |
| Leather Chemical tests Determination of formaldehyde content | |
| Leather Chemical tests Determination of the content of pentachlorophenol in leather | |
| Leather Physical and mechanical tests Determination of bagginess, creep and relaxation | |
| Legal Admissibility of Microforms | |
| Logical Link Control for Local Area Networks Part 2: Guidance for Implementors | |
| Material and articles in contact with foodstuffs Plastics substances subject to limitation Part 12: Determination of 1,3-benzenedimethana mine in food simulants | |
| Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 17: Determination of carbonyl chloride in plastics | |
| Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 18: Determination of 1,2-dihydroxybenzene , 1,3-dihydroxybenzene , 1,4-dihydroxybenzene , 4,4'-dihydroxybenzop henone and 4,4'dihydroxybipheny l in... | |
| Materials and articles in contact with foodstuffs - Polymeric coatings on metal substrates - Guide to the selection of conditions and test methods for overall migration | |
| Materials and articles in contact with foodstuffs - Polymeric coatings on paper and board - Guide to the selection of conditions and test methods for overall migration | |
| Materials and articles in contact with foodstuffs Plastics Polymeric additives Test method for the determination of the mass fraction of a polymeric additive that lies below 1 000 Daltons | |
| Materials and articles in contact with foodstuffs Plastics substances subject to limitation Part 10: Determination of acrylamide in food simulants | |
| Materials and articles in contact with foodstuffs Plastics substances subject to limitation Part 11: Determination of 11-aminoundecanoic acid in food simulants | |
| Materials and articles in contact with foodstuffs Plastics substances subject to limitation Part 13: Determination of 2,2-bis(4-hydroxyphe nyl)propane (Bisphenol A) in food simulants | |
| Materials and articles in contact with foodstuffs Plastics substances subject to limitation Part 14: Determination of 3,3-bis (3-methyl-4-hydroxyp henyl)-2-indoline in food simulants | |
| Materials and articles in contact with foodstuffs Plastics substances subject to limitation Part 15: Determination of 1,3-butadiene in food simulants | |
| Materials and articles in contact with foodstuffs Plastics substances subject to limitation Part 16: Determination of caprolactam and caprolactam salt in food simulants | |
| Materials and articles in contact with foodstuffs Plastics substances subject to limitation Part 19: Determination of dimethylaminoethanol in food simulants | |
| Materials and articles in contact with foodstuffs Plastics substances subject to limitation Part 20: Determination of epichlorohydrin in plastics | |
| Materials and articles in contact with foodstuffs Plastics substances subject to limitation Part 21: Determination of ethylenediamine and hexamethylenediamine in food simulants | |
| Materials and articles in contact with foodstuffs Plastics substances subject to limitation Part 22: Determination of ethylene oxide and propylene oxide in plastics | |
| Materials and articles in contact with foodstuffs Plastics substances subject to limitation Part 23: Determination of formaldehyde and hexamethylenetetrami ne in food simulants | |
| Materials and articles in contact with foodstuffs Plastics substances subject to limitation Part 24: Determination of maleic acid and maleic anhydride in food simulants | |
| Materials and articles in contact with foodstuffs Plastics substances subject to limitation Part 25: Determination of 4-methyl-1-pentene in food simulants | |
| Materials and articles in contact with foodstuffs Plastics substances subject to limitation Part 26: Determination of 1-octene and tetrahydrofuran in food simulants | |
| Materials and articles in contact with foodstuffs Plastics substances subject to limitation Part 27: Determination of 2,4,6-triamino-1,3,5 -triazine in food simulants | |
| Materials and articles in contact with foodstuffs Plastics substances subject to limitation Part 28: Determination of 1,1,1-trimethylolpro pane in food simulants | |
| Materials and articles in contact with footstuffs - Plastics substances subject to limitation - Part 9: Determination of acetic acid, vinyl ester in food simulants | |
| Materials for gaskets and weatherstripping for windows, doors, conservatories and curtain walling - Requirements and test methods | |
| Materials produced from end of life tyres - Specification of categories based on their dimension(s) and impurities and methods for determining their dimension(s) and impurities | |
| Medical laboratories. Reduction of error through risk management and continual improvement | |
| Method for Classifying the Movement Capability of Sealants | |
| Method for Detection and Enumeration of Legionella Organisms in Water and Related Materials | |
| Method for Determination of Chloride Content of Fresh Concrete | |
| Method for Determination of Creep Stiffness of Bitumen Aggregate Mixtures Subject to Confined Uniaxial Loading | |
| Method for determination of endurance properties of stemmed femoral components of hip joint prostheses | |
| Method for Determination of in Situ Crushing Resistance of Floating Levelling Screeds | |
| Method for Determination of Polished Paver Value of Pavers | |
| Method for Determination of the Containment Value of a Laboratory Fume Cupboard | |
| Method for Determination of the indirect tensile stiffness modulus of bituminous mixtures | |
| Method for Determination of the Maximum Binder Content of Bituminous Mixtures without Excessive Binder Drainage | |
| Method for Determination of the relative hydraulic conductivity of permeable surfacings | |
| Method for determining resistance to permanent deformation of bituminous mixtures subject to unconfined dynamic loading | |
| Method for determining the flat crush resistance of fluting (corrugating) medium (Concora medium test) | |
| Method for Performing the Spiral Elongation Test on High Conductivity Copper | |
| Method for Temperature-Matched Curing of Concrete Specimens | |
| Method for testing bending strength and stiffness of bone plates for use in orthopaedic surgery | |
| Method for the Assessment of Pot Life of Non-Flowing Resin Compositions for Use in Civil Engineering | |
| Method for the determination of the radio-opacity index of medical devices made of plastics materials | |
| Method for the Determination of the Wheel Tracking Rate of Cores of Bituminous Wearing Courses | |
| Method of Test for Bond Strength of Sprayed Mineral Coatings | |
| Method of test for ignitability of building products | |
| Method of Test for Soluble Iron Corrosion Products to Assess Surface Cleanliness of Steel Substrates Before Application of Paints and Related Products | |
| Method of Test for the Antimicrobial Activity of Disinfectants in Food Hygiene | |
| Method of Test for the Resistance to Freezing of Gas-Fired Instantaneous Water Heaters | |
| Methods for Assessing Exposure to Wind Driven Rain | |
| Methods for calibration of bonded electric resistance strain gauges | |
| Methods for sampling higher purity copper cathodes and for preparing analysis samples (reference method) | |
| Methods for Testing and Assessing the Performance of Prefabricated Heavy Duty Support Towers | |
| Methods for the sampling and analysis of fume from welding and allied processes. Gases | |
| Methods for the sampling and analysis of fume from welding and allied processes. Particulate matter | |
| Methods of analysis of wood preservatives and treated timber - Part 1: Quantitative analysis of wood preservative solutions and treated timber containing boron compounds - Determination of total boron | |
| Methods of analysis of wood preservatives and treated timber - Part 2: Quantitative analysis of wood preservative solutions and treated timber containing n-butyltin compounds - Determination of tributyltin, dibutyltin and... | |
| Methods of analysis of wood preservatives and treated timber - Part 3: Quantitative analysis of permethrin in solutions of wood preservatives in organic solvents | |
| Methods of analysis of wood preservatives and treated timber - Part 4: Quantitative analysis of cypermethrin in solutions of wood preservatives in organic solvents | |
| Methods of analysis of wood preservatives and treated timber - Part 5: Determination of carboxylic acid type in zinc and copper carboxylate preservative solutions by gas chromatography | |
| Methods of Determination of Maximum Density for Bituminous Mixtures | |
| Methods of Measuring Irregularities on Surfaces of Roads, Footways and Other Paved Areas Using Straightedges and Wedges | |
| Methods of Test and Performance Requirements for General-Purpose Flat Pallets for Through Transit of Goods | |
| Methods of Test for Setting Glazing Compounds for Use in Softwood and Steel Frames | |
| Methods of test for the determination of composition and physical properties of ceramic fibres for high temperature insulation | |
| Methods of test for the thermal performance of solar collectors | |
| Microbiology of food and animal feeding stuffs - Guidelines on preparation and production of culture media - Part 2: Practical guidelines on performance testing of culture media | |
| Microbiology of food and animal feeding stuffs - Guidelines on preparation and production of culture media Part 1: General guidelines on quality assurance for the preparation of culture media in... | |
| Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Campylobacter spp. Part 3: Semi-quantitative method | |
| Microbiology of food and animal feeding stuffs - Specific requirements and guidance for proficiency testing by interlaboratory comparison | |
| Microbiology of food and animal feeding stuffs Guidelines on preparation and production of culture media Part 2: Practical guidelines on performance testing of culture media | |
| Microbiology of food and animal feeding stuffs Polymerase chain reaction (PCR) for the detection of food-borne pathogens Performance testing for thermal cyclers | |
| Mobile demolition machinery Safety requirements | |
| Mouthgauards for Use in Sport and Recreation - Requirements and Test Methods | |
| Multilayer piping systems for hot and cold water installations inside buildings Part 7: Guidance for the assessment of conformity | |
| Nanotechnologies - Terminology and definitions for nanoobjects - Nanoparticle, nanofibre and nanoplat | |
| Non-Calibrated Long Link Steel Chain for General Engineering Purposes | |
| Non-destructive testing Standard test method for determining residual stresses by neutron diffraction | |
| on dimensional co-ordination in building. Detailed design for fit | |
| Open Systems Interconnection: basic connection-oriented session protocol specification (ISO/DIS 8327 revised) | |
| Open Systems Interconnection: basic connection-oriented session service definition (ISO/DIS 8326 revised) | |
| Open Systems Interconnection: connection-oriented presentation protocol specification (ISO/DP 8823.2) | |
| Open Systems Interconnection: connection-oriented presentation service definition (ISO/DP 8822.2) | |
| Open Systems Interconnection: Definition of Common Application Service Elements: Commitment, Concurrency and Recovery | |
| Open Systems Interconnection: file transfer, access and management. General description (ISO/DP 8571/1) | |
| Open Systems Interconnection: file transfer, access and management. The file protocol specification (ISO/DP 8571/4) | |
| Open Systems Interconnection: file transfer, access and management. The file service definition (ISO/DP 8571/3) | |
| Open Systems Interconnection: file transfer, access and management. The virtual filestore (ISO/DP 8571/2) | |
| Open Systems Interconnection: Service Conventions | |
| Open Systems Interconnection: Session Symmetric Synchronization Service | |
| Open Systems Interconnection: specification of Abstract Syntax Notation One (ASN.1) (ISO DIS 8824) | |
| Open Systems Interconnection: specification of basic encoding rules for Abstract Syntax Notation One (ASN.1) | |
| Open Systems Interconnection: Specification of Protocols for Common Application Service Elements: Commitment, Concurrency and Recovery | |
| Open Systems Interconnection: Transport Protocol Specification | |
| Open Systems Interconnection: X.25 packet level protocol for data terminal equipment | |
| Packaging - Braille and other formats for medicinal products | |
| Performance of Damp- Proof Courses Installed to Prevent Rising Damp | |
| Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection | |
| Petroleum, petrochemical and natural gas industries - Method of test for fire dampers | |
| Petroleum, petrochemical and natural gas industries - Sector-specific quality management systems - Requirements for product and service supply organizations | |
| Piston Rings up to 200 mm Diameter for Reciprocating Internal Combustion Engines: Specification for Expander/Segment Oil Control Rings | |
| Piston Rings up to 200 mm Diameter for Reciprocating Internal Combustion Engines: Specification for Half Keystone Rings | |
| Piston Rings up to 200 mm Diameter for Reciprocating Internal Combustion Engines: Specification for Rectangular Rings with Narrow Ring Width | |
| Plastics pipes and fittings for non-pressure applications - Utilisation of non-virgin PVC-U, PP and PE materials | |
| Plastics piping systems for buried and above-ground drainage and sewerage under pressure Unplasticized poly(vinylchloride) (PVC-U) Part 2: Guidance for the assessment of conformity | |
| Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage Polyethylene (PE) Part 7: Guidance for the assessment of conformity | |
| Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) Guidance for the assessment of conformity | |
| Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) Part 7: Guidance for the assessment of conformity | |
| Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 7: Guidance for the assessment of conformity | |
| Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 7: Guidance for the assessment of conformity | |
| Plastics piping systems for hot and cold water installations Polybutylene (PB) Part 7: Guidance for the assessment of conformity | |
| Plastics piping systems for hot and cold water installations Polypropylene (PP) Part 7: Guidance for the assessment of conformity | |
| Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifier(s) (PP-MD) - Part 2: Guidance for the assessment of conformity | |
| Plastics piping systems for non-pressure underground drainage and sewerage Polyethylene (PE) Part 2: Guidance for the assessment of conformity | |
| Plastics piping systems for non-pressure underground drainage and sewerage Polypropylene with mineral modifier(s) (PP-MD) Part 3: Guidance for installation | |
| Plastics piping systems for nonpressure underground drainage and sewerage - Structured-wall piping systems of unplasticized ploy(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 4: Guidance for the assessment of... | |
| Plastics piping systems for water supply or drainage and sewerage Glass-reinforced thermosetting plastics (GPR) based on unsaturated polyester resin (UP) Recommended practice for installation | |
| Plastics piping systems for water supply Polyethylene (PE) Part 7: Guidance for the assessment of conformity | |
| Plastics rainwater piping systems for above ground external use Unplasticized poly(vinyl chloride) (PVC-U) Part 2: Guidance for the assessment of conformity | |
| Plywood - Biological durability - Guidance for the assessment of plywood for use in different use classes | |
| Polyurethane Coated Fabrics for Upholstered Furniture | |
| Postal services - Customer-directed information including track and trace - General concepts and definitions | |
| Postal services Automated processing of mail items Address block locator | |
| Postal services Automated processing of mail items Facing identification marks | |
| Postal services Automatic identification of items Two dimensional bar code symbol print quality specification for machine readable Digital Postage Marks | |
| Postal services Automatic identification of receptacles and containers Mail aggregates | |
| Postal services Hybrid Mail XML definition of encapsulation of letters for automated postal handling | |
| Postal services Quality of service Measurement of loss and substantial delay in priority and first class single piece mail using a survey of test letters | |
| Postal services Trays for international letter mail Test methods and performance requirements | |
| Precast Concrete Pipes of Composite Construction Part 2: Precast Concrete Pipes Strengthened by Chopped Zinc-Coated Steel Fibres | |
| Precast concrete pipes of composite construction. Precast concrete pipes strengthened by continuous alkali-resistant glass fibre rovings | |
| Prevention of crime Urban planning and building design Part 3: Dwellings | |
| Prevention of crime Urban planning and design Part 4: Shops and offices | |
| Private Message Handling System: User Agent and Message Transfer Agent: Private Management Domain to Private Management Domain | |
| Protective clothing and equipment for use in violent situations and in training - Part 9: Training suits and equipment - Requirements and test methods | |
| Protective helmets for skateboard users | |
| Protocol for communications between a lift alarm system and an alarm receiving station (rescue centre) - Specification | |
| Public transport - Road vehicle scheduling and control systems - Part 3: WorldFIP message content | |
| Public transport - Road vehicle scheduling and control systems - Part 6: CAN message content | |
| Qualification Testing for Deposited Organic Interlayer Dielectric Materials for Multichip Modules | |
| Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval procedure Part 2: Cast wheels | |
| Recommendations for cast materials for use in the pump industry | |
| Recommendations for Ground Anchorages | |
| Recommendations for Methods of Protection Against Corrosion on Light Section Steel Used in Building | |
| Recommendations for metric plate and sheet thicknesses and width-length combinations for metallic materials | |
| Recommendations for Preparation of Electronic Images (WORM) of Documents That May Be Required as Evidence | |
| Recommendations for Preservation of Timber | |
| Recommendations for the co-ordination of dimensions in building. Tolerances and fits for building. The calculation of work sizes and joint clearances for building components | |
| Recommendations for the grading of windows. Resistance to wind loads, air infiltration and water penetration, and with notes on window security | |
| Recommendations for the Presentation of Tables, Graphs and Charts | |
| Recommendations for the Use of the Cone Calorimeter | |
| Recommendations for Vandal Resistant Lifts | |
| Recovery of Bitumen Binders by Dichloromethane Extraction (Rotary Film Evaporator Method) | |
| Respiratory protective equipment. Classification | |
| Respiratory protective equipment. Glossary of terms | |
| Respiratory protective equipment. Nomenclature of piece parts | |
| Respiratory protective equipment. Schedule of equivalent terms | |
| Road and airfield surface characteristics - Test methods Part 2: Assessment of the skid resistance of a road pavement surface by the use of dynamic measuring systems | |
| Road Materials - Test Method for the Analysis of Bituminous Mixtures by Ignition | |
| Road transport and traffic telematics Electronic Fee Collection (EFC) Guidelines for EFC security protection profiles | |
| Road Transport and Traffic Telematics Electronic Fee Collection (EFC) System architecture for vehicle related transport services | |
| Road transport and traffic telematics Electronic fee collection Test procedures for user and fixed equipment Part 1: Description of test procedures | |
| Road transport and traffic telematics Electronic fee collection Test procedures for user and fixed equipment Part 2: Conformance test for the onboard unit application interface | |
| S5/8 Serial Interface for the Interconnection of Data Processing Equipment | |
| Safety of Condensing Boilers (2nd and 3rd Family Gases) | |
| Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for equipment rated for use by children and young people in educational establishments | |
| Sawn timber - Method for assessment of case-hardening | |
| Soil Analysis - Part 1: Determination of Polycyclic Aromatic Hydrocarbons (PAH) | |
| Soil Quality - Determination of Mineral Oil Content - Method by Infrared Spectrometry and Gas Chromatographic Method | |
| Solid biofuels Fuel specifications and classes | |
| Solid biofuels Method for the determination of ash content | |
| Solid Biofuels Method for the determination of calorific value | |
| Solid biofuels Methods for determination of moisture content Oven dry method Part 1: Total moisture Reference method | |
| Solid biofuels Methods for sample preparation | |
| Solid biofuels Methods for the determination of moisture content Oven dry method Part 2: Total moisture Simplified method | |
| Solid biofuels Methods for the determination of moisture content Oven dry method Part 3: Moisture in general analysis sample | |
| Solid biofuels Sampling Methods for preparing sampling plans and sampling certificates | |
| Solid biofuels Sampling Part 1: Methods for sampling | |
| Solid biofuels Sampling Part 2: Methods for sampling particulate material transported in lorries | |
| Solid biofuels Terminology, definitions and descriptions | |
| Solid wood panels Bonding quality Test method | |
| Specification for higher purity copper cathode | |
| Specification for modified brass containing 56.0% to 59.0% copper and 2.5% to 4.5% lead intended for free machining applications | |
| Specification for Performance of Alarm and Emergency Wiring Systems Under Fire Conditions | |
| Specification for Pliable Non-Rigid Conduit and Fittings for Direct Burial Underground (Type DB) | |
| Specification for Rack and Pinion Lifts | |
| Specification for Suitability of Metallic Materials for Use in Contact with Water Intended for Human Consumption with Regard to Their Effect on the Quality of the Water | |
| Specification for temporary access platforms Performance and design requirements, and test methods | |
| Specification for zinc-aluminium alloy ingots and castings | |
| Specification of requirements for suitability of materials for use in contact with water for human consumption with regard to their effect on the quality of the water | |
| Sprinkler Systems for Residential and Domestic Occupancies - Code of Practice | |
| Stationary source emission Intralaboratory validation procedure for an alternative method compared to a reference method | |
| Sterilization of health care products - Ethylene oxide Part 2: Guidance on the application of ISO 11135-1 | |
| Sterilization of health care products - Moist heat Part 2: Guidance on the application of ISO 17665-1 | |
| Structure and Representation of Data for Interchange at the Application Level (DIAL) Part 2: Recommendations for the Basic Directory of Data Elements and Groups: Section 2.1: General Information About the... | |
| Structure and Representation of Data for Interchange at the Application Level (DIAL) Part 2: Recommendations for the Basic Directory of Data Elements and Groups: Section 2.2: The DIAL Directory Addendum... | |
| Structured vocabularies for information retrieval - Guide - Part 5: Exchange formats and protocols for interoperability | |
| Swap bodies for combined transport Stackable swap bodies type A 1371 Dimensions, design requirements and testing | |
| TECHNICAL MANUAL FOR DESIGN AND CONSTRUCTION OF ROAD TUNNELS \x96 CIVIL ELEMENTS | |
| Technical product documentation (TPD) Digital product definition data practices | |
| Techniques for Using Standard Generalized Markup Language (SGML) | |
| Test methods for determining the contribution to the fire resistance of structural members Part 1: Horizontal protective membranes | |
| Test methods for external fire exposure to roofs | |
| Testing Aggregates - Method for the Assessment of Alkali-Silica Reactivity - Potential Accelerated Mortar-Bar Method | |
| Testing Aggregates Method for Determination of Alkali-Silica Reactivity Concrete Prism Method | |
| Testing hardened concrete - Part 10: Determination of the relative carbonation resistance of concrete | |
| Testing hardened concrete Part 11: Determination of the chloride resistance of concrete, unidirectional diffusion | |
| Testing hardened concrete Part 9: Freeze-thaw resistance Scaling | |
| Textile floor coverings Requirements for tolerances on (linear) dimensions of rugs, runners, carpet tiles and wall-to-wall carpet and for tolerances on pattern repeat | |
| Thermal solar systems and components - Custom built systems Part 1: General requirements for solar water heaters and combisystems | |
| Thermal solar systems and components - Custom built systems Part 2: Test methods for solar water heaters and combisystems | |
| Thermal solar systems and components - Custom built systems Part 4: Performance test methods for solar combistores | |
| Thermal solar systems and components - Custom built systems Part 5: Performance test methods for control equipment | |
| Token Ring Local Area Network Part 1: Technical Specification | |
| Token Ring Local Area Network Part 2: Guidance for Implementors | |
| Traffic and Travel Information (TTI) - TTI messages via cellular networks - Part 2: Numbering and ADP message header | |
| Traffic and Travel Information (TTI) TTI messages via cellular networks Part 1: General specifications | |
| Traffic and Travel Information (TTI) TTI messages via cellular networks Part 3: Basic information elements | |
| Traffic and Travel information (TTI) TTI messages via cellular networks Part 4: Service-independent protocols | |
| Traffic and Travel Information (TTI) TTI messages via cellular networks Part 5: Internal services | |
| Traffic and Travel Information (TTI) TTI messages via cellular networks Part 6: External services | |
| Traffic and Travel Information (TTI) TTI messages via cellular networks Part 7: Performance requirements for onboard positioning | |
| Traffic and Travel Information (TTI) TTI messages via cellular networks Part 8: GSM-specific parameters | |
| Traffic and Travel Information (TTI) TTI via Transport Protocol Expert Group (TPEG) data-streams Part 1: Introduction, Numbering and Versions | |
| Traffic and Travel Information (TTI) TTI via Transport Protocol Expert Group (TPEG) data-streams Part 2: Syntax, Semantics and Framing Structure (SSF) | |
| Traffic and Travel Information (TTI) TTI via Transport Protocol Expert Group (TPEG) data-streams Part 3: Service and Network Information (SNI) application | |
| Traffic and Travel Information (TTI) TTI via Transport Protocol Expert Group (TPEG) data-streams Part 4: Road Traffic Message (RTM) application | |
| Traffic and Travel Information (TTI) TTI via Transport Protocol Expert Group (TPEG) data-streams Part 5: Public Transport Information (PTI) application | |
| Traffic and Travel Information (TTI) TTI via Transport Protocol Expert Group (TPEG) data-streams Part 6: Location referencing applications | |
| Traffic and Travel Information (TTI) TTI via Transport Protocol Experts Group (TPEG) Extensible Markup Language (XML) Part 1: Introduction, common data types and tpegML | |
| Traffic and Travel Information (TTI) TTI via Transport Protocol Experts Group (TPEG) Extensible Markup Language (XML) Part 2: tpeg-locML | |
| Traffic and Travel Information (TTI) TTI via Transport Protocol Experts Group (TPEG) Extensible Markup Language (XML) Part 3: tpeg-rtmML | |
| Traffic and Travel Information (TTI) TTI via Transport Protocol Experts Group (TPEG) Extensible Markup Language (XML) Part 4: tpeg-ptiML | |
| Traffic and travel information - Messages via media independent stationary dissemination systems - Graphic data dictionary for pre-trip and in-trip information dissemination systems | |
| Traffic and travel information General specifications for medium-range preinformation via dedicated short-range communication Part 1: Downlink | |
| Universal Modular Fuses | |
| Validation of Metal Temperature in the Heat Treatment of Steels for Pressure Purposes | |
| Wall Ties Part 1: Methods of Test for Mortar Joint and Timber Frame Connections | |
| Wall Ties Part 2: Recommendations for Design of Wall Ties | |
| Water quality Enumeration of micro-organisms in water samples Guidance on the estimation of variation of results with particular reference to the contribution of uncertainty of measurement | |
| Welding and allied processes Designation system for imperfections | |
| Welding Use of time-of-flight diffraction technique (TOFD) for examination of welds | |
| Wood preservatives Field test method for determining the relative protective effectiveness of a wood preservative exposed out of ground contact Horizontal lap-joint method | |
| Wood-based panels - Floating floors - Part 2: Test methods | |
| Wood-based panels - Guidance on the use of load-bearing boards in floors, walls and roofs | |
| Wood-based panels - Small scale indicative test methods for certain mechanical properties |
| << Prev | Next >> |