Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
210
220
230
240
250
257
258
259
260
261
262
263
264
265
266
267
268
269
270
280
290
300
310
320
350
400
450
500
550
600
1000
1500
1620
| Product Name | Notes |
|---|---|
| Acoustics - Methods for the description and physical measurement of single impulses or series of impulses | |
| Acrylonitrile butadiene styrene (ABS) compounds, pipes and fittings for pressure applications | |
| Adhesives for timber and timber products, Part 1: Adhesives for manufacture of plywood and laminated veneer lumber (LVL) | |
| Aerospace \x96 Qualification and approval of personnel for non-destructive testing | |
| Air-handling and water systems of buildings - Microbial control, Part 1: Design, installation and commissioning | |
| Air-handling and water systems of buildings - Microbial control, Part 2: Operation and maintenance | |
| Air-handling and water systems of buildings - Microbial control, Part 3: Performance-based maintenance of cooling water systems | |
| Air-handling and water systems of buildings - Microbial control, Part 4: Performance-based maintenance of air-handling systems (ducts and components) | |
| Approval and test specification - Air break switches | |
| Approval and test specification - Appliance couplers for household and similar general purposes, Part 1: General requirements | |
| Approval and test specification - Bayonet lampholders | |
| Approval and test specification - Beauty therapy equipment | |
| Approval and test specification - Cables for high voltage luminous discharge tube installations | |
| Approval and test specification - Ceiling roses | |
| Approval and test specification - Commercial refrigerated food cabinets | |
| Approval and test specification - Cord extension sockets | |
| Approval and test specification - Cord-line switches | |
| Approval and test specification - Decorative lighting outfits | |
| Approval and test specification - Edison-type screw lampholders | |
| Approval and test specification - Electric cables - Elastomer insulated - For working voltages up to and including 0.6/1 kV | |
| Approval and test specification - Electric cables - Neutral screened - For working voltages up to and including 0.6/1 kV | |
| Approval and test specification - Electric cables - XLPE insulated - For working voltages up to and including 0.6/1 kV | |
| Approval and test specification - Electric cooking appliances for household use | |
| Approval and test specification - Electric duct heaters | |
| Approval and test specification - Electric fence energizers, Part 1: Safety requirements for mains-operated electric fence energizers | |
| Approval and test specification - Electric fence energizers, Part 2: Safety requirements for battery-operated electric fence energizers suitable for connection to the supply mains | |
| Approval and test specification - Electric fence energizers, Part 3: Safety requirements for battery-operated electric fence energizers not for connection to the supply mains | |
| Approval and test specification - Electric flexible cords | |
| Approval and test specification - Electric floor polishers | |
| Approval and test specification - Electric inspection handlamps | |
| Approval and test specification - Electric kitchen machines for household use | |
| Approval and test specification - Electric lawnmowers | |
| Approval and Test Specification - Electric Room Heaters | |
| Approval and test specification - Electric shaver supply units | |
| Approval and test specification - Electric soldering irons | |
| Approval and test specification - Electrical equipment for spa and swimming pools | |
| Approval and test specification - Electrical portable outlet devices | |
| Approval and test specification - Electrically operated aquarium equipment | |
| Approval and test specification - General requirements for electrical equipment | |
| Approval and test specification - Insect electrocutors | |
| Approval and test specification - Insulating mouldings | |
| Approval and test specification - Lampholder adaptors | |
| Approval and test specification - Mains operated electronic and related equipment for household and similar general use | |
| Approval and test specification - Medical electrical equipment, Part 1.1: General requirements for safety - Collateral Standard: Safety requirements for medical electrical systems | |
| Approval and test specification - Medical electrical equipment, Part 1.2: General requirements for safety - Collateral Standard: Electromagnetic compatibility - Requirements and tests | |
| Approval and test specification - Medical electrical equipment, Part 1.3: General requirements for safety - Collateral Standard: Requirements for radiation protection in diagnostic X-ray equipment | |
| Approval and test specification - Medical electrical equipment, Part 1.4: General requirements for safety - Collateral Standard: Programmable electrical medical systems | |
| Approval and test specification - Medical electrical equipment, Part 2.15: Particular requirements for safety - Capacitor discharge X-ray generators | |
| Approval and test specification - Medical electrical equipment, Part 2.18: Particular requirements for safety - Endoscopic equipment | |
| Approval and test specification - Medical electrical equipment, Part 2.201: Particular requirements for safety - Dento-maxillofacial X-ray equipment | |
| Approval and test specification - Medical electrical equipment, Part 2.202: Particular requirements for safety - Infant apnoea monitors for domestic use | |
| Approval and test specification - Medical electrical equipment, Part 2.21: Particular requirements for safety - Infant radiant warmers | |
| Approval and test specification - Medical electrical equipment, Part 2.22: Particular requirements for safety - Diagnostic and therapeutic laser equipment | |
| Approval and test specification - Medical electrical equipment, Part 2.23: Particular requirements for safety - Transcutaneous partial pressure monitoring equipment | |
| Approval and test specification - Medical electrical equipment, Part 2.25: Particular requirements for safety - Electrocardiographs | |
| Approval and test specification - Medical electrical equipment, Part 2.26: Particular requirements for safety - Electroencephalograp hs | |
| Approval and test specification - Medical electrical equipment, Part 2.27: Particular requirements for safety - Electrocardiographic monitoring equipment | |
| Approval and test specification - Medical electrical equipment, Part 2.28: Particular requirements for safety - X-ray source assemblies and X-ray tube assemblies for medical diagnosis generators | |
| Approval and test specification - Medical electrical equipment, Part 2.30: Particular requirements for safety - Automatic cycling indirect blood pressure monitoring equipment | |
| Approval and test specification - Medical electrical equipment, Part 2.32: Particular requirements for safety - Associated equipment of X-ray equipment | |
| Approval and test specification - Medical electrical equipment, Part 2.33: Particular requirements for safety - Magnetic resonance equipment for medical diagnosis | |
| Approval and test specification - Medical electrical equipment, Part 2.34: Particular requirements for safety - Direct blood-pressure monitoring equipment | |
| Approval and test specification - Medical electrical equipment, Part 2.36: Particular requirements for safety - Extracorporeally induced lithotripsy | |
| Approval and test specification - Medical electrical equipment, Part 2.38: Particular requirements for safety - Electrically operated hospital beds | |
| Approval and test specification - Medical electrical equipment, Part 2.7: Particular requirements for safety - High-voltage generators of diagnostic X-ray generators | |
| Approval and test specification - Medical electrical equipment, Part 2.9: Particular requirements for safety - Patient contact dosemeters used in radiotherapy with electrically connected detectors | |
| Approval and test specification - Medical electrical equipment, Part 3.1: Essential performance requirements for transcutaneous oxygen and carbon dioxide partial pressure monitoring equipment | |
| Approval and test specification - Mineral-insulated metal-sheathed cables | |
| Approval and test specification - Miniature overcurrent circuit-breakers | |
| Approval and test specification - Motor-operated appliances | |
| Approval and test specification - Particular requirements for electric fans | |
| Approval and test specification - Particular requirements for isolating transformers and safety isolating transformers | |
| Approval and test specification - Plugs and socket-outlets for use in installation wiring systems | |
| Approval and test specification - Plugs and socket-outlets | |
| Approval and test specification - Plugs, socket-outlets and couplers for general industrial application | |
| Approval and test specification - Portable electrical control or conditioning devices | |
| Approval and test specification - Portable lamp standards and brackets | |
| Approval and test specification - Portable machines for electric arc welding and allied processes | |
| Approval and test specification - Refrigerated room air-conditioners | |
| Approval and test specification - Residual current devices (current-operated earth-leakage devices) | |
| Approval and test specification - Residual current-operated circuit breakers without integral overcurrent protection for household and similar uses (RCCB\x92s), Part 2.2: Functionally dependent on line voltage | |
| Approval and test specification - Residual current-operated circuit breakers without integral overcurrent protection for household and similar uses (RCCBs), Part 2.1: Functionally independent of line voltage | |
| Approval and test specification - Residual current-operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs), Part 1: General rules | |
| Approval and test specification - Safety of electrically heated blankets, pads and similar flexible heating appliances for household use | |
| Approval and test specification - Safety of household and similar electrical appliances - Particular requirements - Pumps for liquids having a temperature not exceeding 35 degrees Celsius | |
| Approval and test specification - Safety of household and similar electrical appliances, Part 2.11: Particular requirements - Tumbler dryers | |
| Approval and test specification - Safety of household and similar electrical appliances, Part 2.9: Particular requirements - Toasters, grills, roasters and similar appliances | |
| Approval and test specification - Safety of information technology equipment including electrical business equipment - Alphabetical reference index to IEC 950 (Supplement to AS/NZS 3260:1993) | |
| Approval and Test Specification - Safety of Information Technology Equipment Including Electrical Business Equipment | |
| Approval and test specification - Socket-outlet adaptors | |
| Approval and test specification - Switches for appliances, Part 1: General requirements | |
| Approval and test specification - Terminations and glands for mineral-insulated metal-sheathed cables | |
| Approval and test specification - Thermostats and energy regulators | |
| Approval and test specification \x96 Hand-held portable electric tools | |
| Approval and test specification for cord extension sets - Cord extension sets | |
| Approval and test specifications - Medical electrical equipment, Part 2.17: Particular requirements for safety - Remote-controlled automatically-driven gamma-ray afterloading equipment | |
| Built-in components for masonry construction, Part 3: Lintels and shelf angles (durability requirements) | |
| Cassettes for medical X-ray diagnosis - Radiographic cassettes and mammographic cassettes | |
| Cathodic protection of metals, Part 1: Pipes and cables | |
| Cellulose-cement products, Part 1: Corrugated sheets | |
| Cellulose-cement products, Part 2: Flat sheets | |
| Clearing saws, brushcutters and grass trimmers - Guide to safe working practices | |
| Conductors - Covered overhead - For working voltages 6.35/11 (12) kV up to and including 19/33 (36) kV | |
| Damp-proof courses and flashings | |
| Data elements and interchange formats - Information interchange - Representation of dates and times | |
| Design for installation of buried concrete pipes - Commentary (Supplement to AS/NZS 3725:2007) | |
| Design for installation of buried concrete pipes | |
| Diesel engine systems for underground coal mines, Part 1: Fire protected - Heavy duty | |
| Diesel engine systems for underground coal mines, Part 2: Explosion protected | |
| Diesel engine systems for underground coal mines, Part 3: Maintenance | |
| Domestic solid fuel burning appliances - Installation | |
| Doors - Security screen, Part 1: Hinged | |
| Doors - Security screen, Part 2: Sliding | |
| Drinking water treatment units - Plumbing requirements | |
| Electric cables - Aerial bundled - Polymeric insulated - Voltages 6.35/11 (12) kV and 12.7/22 (24) kV, Part 1: Metallic screened | |
| Electric cables - Aerial bundled - Polymeric insulated - Voltages 6.35/11(12) kV and 12.7/22(24) kV, Part 2: Non-metallic screened | |
| Electric cables - Cross-linked polyethylene insulated - Aerial bundled - For working voltages up to and including 0.6/1 (1.2) kV, Part 2: Copper conductors | |
| Electric cables - Cross-linked polyethylene insulated - Aerial bundled - For working voltages up to and including 0.6/1(1.2) kV, Part 1: Aluminium conductors | |
| Electric cables - Lead and lead alloy sheaths - Composition | |
| Electric cables - Reeling and trailing - For mining and general use (other than underground coal mining) | |
| Electrical equipment for explosive atmospheres - Overhaul and repair | |
| Electrical equipment in mines and quarries - Surface installations and associated processing plant | |
| Electrical installations (known as the Australian/New Zealand Wiring Rules) | |
| Electrical installations - Classification of the fire and mechanical performance of wiring system elements | |
| Electrical installations - Connectable electrical installations and supply arrangements, Part 1: Site supplies for connectable electrical installations | |
| Electrical installations - Connectable electrical installations and supply arrangements, Part 2: Connectable electrical installations | |
| Electrical installations - Construction and demolition sites | |
| Electrical installations - Domestic installations | |
| Electrical installations - Electric fences | |
| Electrical installations - Electric security fences | |
| Electrical installations - Emergency power supplies in hospitals | |
| Electrical installations - Extra-low voltage d.c. power supplies and service earthing within public telecommunications networks | |
| Electrical installations - Generating sets | |
| Electrical installations - Marinas and pleasure craft at low-voltage | |
| Electrical installations - Marinas and recreational boats, Part 1: Marinas | |
| Electrical installations - Marinas and recreational boats, Part 2: Recreational boats installations | |
| Electrical installations - Patient treatment areas of hospitals and medical and dental practices | |
| Electrical installations - Periodic verification | |
| Electrical installations - Relocatable premises (including caravans and tents) and their site installations | |
| Electrical installations - Selection of cables, Part 1.1: Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions | |
| Electrical installations - Selection of cables, Part 1.2: Cables for alternating voltages up to and including 0.6/1 kV - Typical New Zealand installation conditions | |
| Electrical installations - Shows and carnivals | |
| Electrical installations - Testing guidelines | |
| Electromagnetic compatibility - Arc welding equipment | |
| Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules | |
| Energy audits, Part 1: Commercial buildings | |
| Energy audits, Part 2: Industrial and related activities | |
| Energy audits, Part 3: Transport related activities | |
| Energy audits | |
| Essential safety requirements for electrical equipment | |
| Essential safety requirements for low voltage electrical equipment | |
| Fire blankets | |
| Flexible tube connectors for water supply | |
| Freight containers Part 1: Classification, dimensions and ratings | |
| Freight Containers Part 5: Thermal Containers | |
| Freight containers, Part 10: Handling and securing | |
| Freight containers, Part 1: Classification, dimensions and ratings | |
| Freight containers, Part 2: Terminology | |
| Freight containers, Part 3: Corner fittings | |
| Freight containers, Part 4: General purpose containers | |
| Freight containers, Part 6: Tank containers | |
| Freight containers, Part 7: Dry bulk containers | |
| Freight containers, Part 8: Platform containers | |
| Freight containers, Part 9: Coding, identification and marking | |
| Fuel containers - Portable - Plastics and metal | |
| Furniture - Assessment of the ignitability of upholstered furniture, Part 1: Ignition source - Smouldering cigarette | |
| Furniture - Assessment of the ignitability of upholstered furniture, Part 2: Ignition source - Match-flame equivalent | |
| Furniture - Assessment of the ignitability of upholstered furniture, Part 3: Ignition sources - Nominal 160 mL/min gas flame and nominal 350 mL/min gas flame | |
| Guide to the safe use of infusion pumps and controllers | |
| High pressure decorative laminates - Sheets made from thermosetting resins, Part 2: Determination of properties | |
| High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (usually called laminates), Part 3: Classification and specifications for laminates less than 2 mm thick and intended for bonding... | |
| High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (usually called laminates), Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater (ISO 4586-4:2018,... | |
| High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (usually called laminates), Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for... | |
| High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (usually called laminates), Part 6: Classification and specifications for exterior-grade compact laminates of thickness 2 mm and greater (ISO... | |
| High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (usually called laminates), Part 8: Classification and specifications for alternative core laminates (ISO 4586-8:2018, IDT) | |
| High-pressure decorative laminates (HPL, HPDL) \x96 Sheets based on thermosetting resins (usually called laminates) Part 7: Classification and specifications for design laminates | |
| High-Pressure Decorative Laminates - Sheets Made from Thermosetting Resins Part 1: Classification and Specifications | |
| Implants for surgery - Care and handling of orthopaedic implants | |
| In-service safety inspection and testing of electrical equipment and RCDs | |
| Information processing systems - Data communications - Protocol for providing the connectionless-mode network service | |
| Information processing systems - Open Systems Interconnection - Basic reference model, Part 1: The basic model | |
| Information processing systems - Open Systems Interconnection - File transfer, access and management, Part 1: General introduction - Overlapped access (Supplement to AS/NZS 3646.1:1993) | |
| Information processing systems - Open Systems Interconnection - File transfer, access and management, Part 1: General introduction | |
| Information processing systems - Open Systems Interconnection - File transfer, access and management, Part 2: Virtual filestore definition - Overlapped access (Supplement to AS/NZS 3646.2:1993) | |
| Information processing systems - Open Systems Interconnection - File transfer, access and management, Part 2: Virtual filestore definition | |
| Information processing systems - Open Systems Interconnection - File transfer, access and management, Part 3: File service definition - Overlapped access (Supplement to AS/NZS 3646.3:1993) | |
| Information processing systems - Open Systems Interconnection - File transfer, access and management, Part 3: File service definition | |
| Information processing systems - Open Systems Interconnection - File transfer, access and management, Part 4: File protocol specification - Overlapped access (Supplement to AS/NZS 3646.4:1993) | |
| Information processing systems - Open Systems Interconnection - File transfer, access and management, Part 4: File protocol specification | |
| Information processing systems - Open Systems Interconnection - File transfer, access and management, Part 5: Protocol implementation conformance statement proforma | |
| Information processing systems - Telecommunications and information exchange between systems - End system to intermediate system routing exchange protocol for use in conjunction with the protocol for providing the connectionless-mode... | |
| Information technology - Data communication - 37-pole DTE/DCE interface connector and contact number assignments | |
| Information technology - Data communications - X.25 packet layer protocol for data terminal equipment | |
| Information technology - Generic cabling for customer premises (ISO/IEC 11801:2011, MOD) | |
| Information technology - Open Systems Interconnection - Guidelines for the application of Estelle, LOTOS and SDL | |
| Information technology - Open Systems Interconnection - Job transfer and manipulation concepts and services | |
| Information technology - Open Systems Interconnection - Network service definition | |
| Information technology - Open Systems Interconnection - Specification of the basic class and full protocol for job transfer and manipulation | |
| Information technology - Open Systems Interconnection - Systems management overview | |
| Information technology - Specification for a data descriptive file for information interchange | |
| Information technology - Telecommunications and information exchange between systems - 34-pole DTE/DCE interface connector mateability dimensions and contact number assignments | |
| Information technology - Telecommunications and information exchange between systems - Data link service definition for Open Systems Interconnection | |
| Information technology - Telecommunications and information exchange between systems - High-level data link control procedures - Classes of procedures | |
| Information technology - Telecommunications and information exchange between systems - High-level data link control procedures - Description of the X.25 LAPB-compatible DTE data link procedures | |
| Information technology - Telecommunications and information exchange between systems - High-level data link control procedures - General purpose XID frame information field content and format | |
| Information technology - Telecommunications and information exchange between systems - Interface connector and contact assignments for ISDN basic access interface located at reference points S and T | |
| Information technology - Telecommunications and information exchange between systems - Open Systems Interconnection - Protocol for providing the connection-mode transport service | |
| Information technology - Telecommunications and information exchange between systems - Start-stop transmission signal quality at DTE/DCE interfaces | |
| Information technology - Telecommunications and information exchange between systems - Use of X.25 to provide the OSI connection-mode network service | |
| Installation of ABS pipe systems | |
| Installation of security screen doors, Part 1: Hinged | |
| Installation of security screen doors, Part 2: Sliding | |
| Insulating and sheathing materials for electric cables | |
| Insulating mats for electrical purposes | |
| Insulators - Porcelain and glass for overhead power lines - Voltages greater than 1000 V a.c., Part 1: Test methods - Insulator units | |
| Insulators - Porcelain and glass for overhead power lines - Voltages greater than 1000 V a.c., Part 2: Characteristics | |
| Insulators - Porcelain and glass for overhead power lines - Voltages greater than 1000 V a.c., Part 4: Test methods - Insulator strings and insulator sets | |
| Intruder alarm systems - Road vehicles, Part 1: Performance requirements | |
| Intruder alarm systems - Road vehicles, Part 2: Installation and maintenance | |
| Laboratory design and construction, Part 1: General requirements | |
| Laboratory design and construction | |
| Limits and methods of measurement of radio interference characteristics of information technology equipment | |
| Low-voltage switchgear and controlgear assemblies, Part 1: Type-tested and partially type tested assemblies (IEC 60439-1:1999 MOD) | |
| Low-voltage switchgear and controlgear assemblies, Part 2: Particular requirements for busbar trunking systems (busways) | |
| Low-voltage switchgear and controlgear assemblies, Part 3: Particular requirements for low voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use... | |
| Low-voltage switchgear and controlgear assemblies, Part 4: Particular requirements for assemblies for construction sites (ACS) | |
| Low-voltage switchgear and controlgear assemblies, Part 5: Particular requirements for assemblies intended to be installed outdoors in public places - Cable distribution cabinets (CDCs) for power distribution in networks | |
| LP Gas fuel vessels for automotive use | |
| Management of Clinical and Related Wastes | |
| Medical electrical equipment - Approval and test specification, Part 2.4: Particular requirement for safety - Cardiac defibrillators and cardiac defibrillator-monito rs | |
| Medical electrical equipment, Part 1.0: General requirements for safety - Parent Standard | |
| Medical electrical equipment, Part 1.8: General requirements for safety - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems | |
| Medical electrical equipment, Part 2.11: Particular requirements for safety - Gamma beam therapy equipment | |
| Medical electrical equipment, Part 2.13: Particular requirements for safety - Anaesthetic workstations | |
| Medical electrical equipment, Part 2.16: Particular requirements for safety - Haemodialysis, haemodiafiltration and haemofiltration equipment | |
| Medical electrical equipment, Part 2.1: Particular requirements for safety - Electron accelerators in the range 1 MeV to 50 MeV | |
| Medical electrical equipment, Part 2.200: Particular requirements for safety - Oxygen concentrators for individual patient use | |
| Medical electrical equipment, Part 2.24: Particular requirements for safety - Infusion pumps and controllers | |
| Medical electrical equipment, Part 2.29: Particular requirements for safety - Radiotherapy simulators (IEC 60601-2-29:1999, MOD) | |
| Medical electrical equipment, Part 2.2: Particular requirements for safety - High frequency surgical equipment | |
| Medical electrical equipment, Part 2.31: Particular requirements for safety - External cardiac pacemakers with internal power source | |
| Medical electrical equipment, Part 2.35: Particular requirements for safety - Blankets, pads and mattresses intended for heating in medical use | |
| Medical electrical equipment, Part 2.39: Particular requirements for safety - Peritoneal dialysis equipment | |
| Medical electrical equipment, Part 2.40: Particular requirements for safety - Electromyographs and evoked response equipment | |
| Medical electrical equipment, Part 2.41: Particular requirements for safety - Surgical luminaires and luminaires for diagnosis (IEC 60601-2-41:2000, MOD) | |
| Medical electrical equipment, Part 2.43: Particular requirements for safety - X-ray equipment for interventional procedures (IEC 60601-2-43:2000, MOD) | |
| Medical electrical equipment, Part 2.44: Particular requirements for safety - X-ray equipment for computed tomography | |
| Medical electrical equipment, Part 2.45: Particular requirements for safety - Mammographic X-ray equipment and mammographic stereotactic devices | |
| Medical electrical equipment, Part 2.46: Particular requirements for the safety of operating tables | |
| Medical electrical equipment, Part 2.5: Particular requirements for safety - Ultrasonic physiotherapy equipment (IEC 60601-2-5:2000, MOD) | |
| Medical electrical equipment, Part 2.6: Particular requirements for safety - Microwave therapy equipment (IEC 60601-2-6:1984, MOD) | |
| Medical electrical equipment, Part 2.8: Particular requirements for safety - Therapeutic X-ray generators | |
| Method for testing pressure cycling resistance of pipes and fittings | |
| Methods for sampling and analysis of ambient air Method 10.2: Determination of particulate matter\x97Impinged matter\x97Gravimetri c method | |
| Methods for sampling and analysis of ambient air, Method 10.1: Determination of particulate matter - Deposited matter - Gravimetric method | |
| Methods for sampling and analysis of ambient air, Method 11.1: Determination of methane and non-methane organic compounds in ambient air - Direct-reading instrumental method | |
| Methods for sampling and analysis of ambient air, Method 12.1: Determination of light scattering - Integrating nephelometer method | |
| Methods for sampling and analysis of ambient air, Method 13.2: Determination of gaseous and acid-soluble particulate fluorides - Manual, double filter paper sampling | |
| Methods for sampling and analysis of ambient air, Method 15: Determination of gaseous pollutants in ambient air using differential optical absorption spectrometry (DOAS) - Directreading instrumental method | |
| Methods for sampling and analysis of ambient air, Method 16: Determination of polycyclic aromatic hydrocarbons (PAH) | |
| Methods for sampling and analysis of ambient air, Method 17: Determination of gaseous compounds in ambient air - Direct-reading cavity ring-down spectroscopy instrumental method | |
| Methods for sampling and analysis of ambient air, Method 18: Measurement of road tunnel air quality | |
| Methods for sampling and analysis of ambient air, Method 2.2: Preparation of reference test atmospheres - Compressed gas method | |
| Methods for sampling and analysis of ambient air, Method 9.10: Determination of suspended particulate matter - PM (sub)2.5(/sub) low volume sampler - Gravimetric method | |
| Methods for sampling and analysis of ambient air, Method 9.11: Determination of suspended particulate matter - PM10 beta attenuation monitors | |
| Methods for sampling and analysis of ambient air, Method 9.12: Determination of suspended particulate matter - PM2.5 beta attenuation monitors | |
| Methods for sampling and analysis of ambient air, Method 9.13: Determination of suspended particulate matter - PM2.5 continuous direct mass method using a tapered element oscillating microbalance monitor | |
| Methods for sampling and analysis of ambient air, Method 9.14: Determination of suspended particulate matter - PM2.5 high volume sampler with size selective inlet - Gravimetric method | |
| Methods for sampling and analysis of ambient air, Method 9.15: Determination of suspended particulate matter - Particulate metals high or low volume sampler gravimetric collection - Inductively coupled plasma (ICP)... | |
| Methods for sampling and analysis of ambient air, Method 9.16: Determination of suspended particulate matter - PM 10 continuous direct mass method using a tapered element oscillating microbalance monitor incorporating... | |
| Methods for sampling and analysis of ambient air, Method 9.17: Demonstration of equivalence for ambient particulate matter monitoring methods | |
| Methods for sampling and analysis of ambient air, Method 9.3: Determination of suspended particulate matter - Total suspended particulate matter (TSP) - High volume sampler gravimetric method | |
| Methods for sampling and analysis of ambient air, Method 9.6: Determination of suspended particulate matter - PM(sub)10(/sub) high volume sampler with size-selective inlet - Gravimetric method | |
| Methods for sampling and analysis of ambient air, Method 9.7: Determination of suspended particulate matter - Dichotomous sampler (PM | |
| Methods for sampling and analysis of ambient air, Method 9.9: Determination of suspended particulate matter - PM(sub)10(/sub) low volume sampler - Gravimetric method | |
| Methods for sampling and analysis of ambient air, Part 1.1: Guide to siting air monitoring equipment | |
| Methods for sampling and analysis of ambient air, Part 14: Meteorological monitoring for ambient air quality monitoring applications | |
| Methods of sampling and testing asphalt, Method 1.1: Sampling - Loose asphalt | |
| Methods of sampling and testing asphalt, Method 10: Moisture content of asphalt | |
| Methods of sampling and testing asphalt, Method 11: Degree of particle coating | |
| Methods of sampling and testing asphalt, Method 13.1: Determination of the resilient modulus of asphalt - Indirect tensile method | |
| Methods of sampling and testing asphalt, Method 14.1.1: Field density tests - Determination of field density of compacted asphalt using a nuclear surface moisture-density gauge - Direct transmission mode | |
| Methods of sampling and testing asphalt, Method 14.1.2: Field density tests - Determination of field density of compacted asphalt using a nuclear surface moisture-density gauge - Backscatter mode | |
| Methods of sampling and testing asphalt, Method 14.2: Field density tests - Determination of field density of compacted asphalt using a nuclear thin-layer density gauge | |
| Methods of sampling and testing asphalt, Method 14.3: Field density tests - Calibration of nuclear thin-layer density gauge using standard blocks | |
| Methods of sampling and testing asphalt, Method 14.4: Field density tests - Calibration of nuclear surface moisture-density gauge - Backscatter mode | |
| Methods of sampling and testing asphalt, Method 14.5: Field density tests - Density ratio of compacted asphalt | |
| Methods of sampling and testing asphalt, Method 2.1: Sample preparation - Mixing, quartering and conditioning of asphalt in the laboratory | |
| Methods of sampling and testing asphalt, Method 2.2: Sample preparation - Compaction of asphalt test specimens using a gyratory compactor | |
| Methods of sampling and testing asphalt, Method 3.1: Bitumen content and aggregate grading - Reflux method | |
| Methods of sampling and testing asphalt, Method 3.2: Bitumen content and aggregate grading - Centrifugal extraction method | |
| Methods of sampling and testing asphalt, Method 3.3: Bitumen content and aggregate grading - Pressure filter method | |
| Methods of sampling and testing asphalt, Method 5: Compaction of asphalt by Marshall method and determination of stability and flow - Marshall procedure | |
| Methods of sampling and testing asphalt, Method 7.1: Determination of maximum density of asphalt - Water displacement method | |
| Methods of sampling and testing asphalt, Method 7.3: Determination of maximum density of asphalt - Methylated spirits displacement | |
| Methods of sampling and testing asphalt, Method 8: Voids and volumetric properties of compacted asphalt mixes | |
| Methods of sampling and testing asphalt, Method 9.1: Determination of bulk density of compacted asphalt - Waxing procedure | |
| Methods of sampling and testing asphalt, Method 9.2: Determination of bulk density of compacted asphalt - Presaturation method | |
| Methods of sampling and testing asphalt, Method 9.3: Determination of bulk density of compacted asphalt - Mensuration method | |
| Methods of testing child restraints - Dynamic testing | |
| Methods of testing child restraints, Method 10: Bite test | |
| Methods of testing child restraints, Method 11: Measuring energy attenuation | |
| Methods of testing child restraints, Method 12: Test for openings in fabric and netting of child restraint accessories | |
| Methods of testing child restraints, Method 1: Dynamic testing | |
| Methods of testing child restraints, Method 2: Determination of hazardous throat contact in abnormal situations | |
| Methods of testing child restraints, Method 3: Dynamic testing of upper anchorage components | |
| Methods of testing child restraints, Method 4: Determination of the force required to adjust a harness | |
| Methods of testing child restraints, Method 5: Determination of quick-release device actuation force | |
| Methods of testing child restraints, Method 6: Determination of recline angle | |
| Methods of testing child restraints, Method 7: Test for suitability of seatbelt length | |
| Methods of testing child restraints, Method 8: Test for suitability of booster seat profile | |
| Methods of testing child restraints, Method 9: Test for length of seating surface on a booster seat | |
| National Plumbing and Drainage Code, Part 0: Glossary of terms | |
| National plumbing and drainage, Part 1.2: Water supply - Acceptable solutions | |
| National plumbing and drainage, Part 2.2: Sanitary plumbing and drainage - Acceptable solutions | |
| National plumbing and drainage, Part 3.2: Stormwater drainage - Acceptable solutions | |
| National Plumbing and Drainage, Part 4.2: Hot water supply systems - Acceptable solutions | |
| Natural gas (CNG) fuel systems for vehicle engines | |
| Optical fibre communication cabling systems safety | |
| Paints for steel structures, Part 0: Introduction and list of Standards | |
| Paints for steel structures, Part 10: Full gloss epoxy (two-pack) | |
| Paints for steel structures, Part 11: Chlorinated rubber - High-build and gloss | |
| Paints for steel structures, Part 12: Alkyd/micaceous iron oxide | |
| Paints for steel structures, Part 13: Epoxy primer (two-pack) | |
| Paints for steel structures, Part 14: High-build epoxy (two-pack) | |
| Paints for steel structures, Part 15: Inorganic zinc silicate paint | |
| Paints for steel structures, Part 16: Waterborne primer and paint for galvanized, zinc/aluminium alloy-coated and zinc-primed steel | |
| Paints for steel structures, Part 17: Etch primers (single pack and two-pack) | |
| Paints for steel structures, Part 19: Metal primer - General purpose | |
| Paints for steel structures, Part 1: Epoxy mastic (two-pack) - For rusted steel | |
| Paints for steel structures, Part 20: Anticorrosive metal primer - Solvent-borne - Lead and chromate free | |
| Paints for steel structures, Part 21: Undercoat - Solvent-borne | |
| Paints for steel structures, Part 22: Full gloss enamel - Solvent-borne | |
| Paints for steel structures, Part 23: Semi-gloss enamel - Solvent-borne | |
| Paints for steel structures, Part 2: Ultra high-build paint | |
| Paints for steel structures, Part 3: Heat resisting - Exterior | |
| Paints for steel structures, Part 4: Bitumen paint | |
| Paints for steel structures, Part 5: Acrylic full gloss (two-pack) | |
| Paints for steel structures, Part 6: Full gloss polyurethane (two-pack) | |
| Paints for steel structures, Part 7: Aluminium paint | |
| Paints for steel structures, Part 8: Vinyl paints - Primer, high-build and gloss | |
| Paints for steel structures, Part 9: Organic zinc-rich primer | |
| Parking facilities, Part 1: Off-street car parking | |
| Performance of electrical appliances - Airconditioners and heat pumps, Part 1.1: Non-ducted airconditioners and heat pumps - Testing and rating for performance | |
| Performance of household electrical appliances - Microwave ovens, Part 1: Methods for measuring the performance of microwave ovens for household and similar purposes | |
| Performance of household electrical appliances - Microwave ovens, Part 3: Construction, quality and cooking tests | |
| Pipelines - Gas and liquid petroleum, Part 1: Design and construction | |
| Pipelines - Gas and liquid petroleum, Part 2: Welding | |
| Pipelines - Gas and liquid petroleum, Part 4: Submarine Pipeline Systems | |
| Pipelines - Gas and liquid petroleum, Part 5: Field pressure testing | |
| Pipelines - Gas and liquid petroleum, Part 6: Pipeline safety management | |
| Plastic monobloc chairs | |
| Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 18: Method for determining the ultimate tensile strength and unit modulus of flat laminates | |
| Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 19: Method for the determination of the lap shear strength of laminate | |
| Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 20: Method for the determination of the peel strength of the bond between laminate layers | |
| Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 21: Method for the determination of the shear strength of a sandwich panel | |
| Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 22: Method for the determination of hardness by means of a Barcol impressor | |
| Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 23: Method for the determination of the initial longitudinal tensile strength by means of a tensile plate test... | |
| Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 24: Method for the determination of the initial hoop tensile strength by means of a tensile plate test... | |
| Plumbing and drainage, Part 1: Water services | |
| Plumbing and drainage, Part 2: Sanitary plumbing and drainage | |
| Plumbing and drainage, Part 3: Stormwater drainage | |
| Plumbing and drainage, Part 4: Heated water services | |
| Plumbing and Drainage, Part 5: Domestic installations | |
| Prefinished/prepaint ed sheet metal products for interior/exterior building applications - Performance requirements | |
| Pressure equipment \x97 In-service inspection | |
| Qualification of welders for fusion welding of steels | |
| Radiofrequency fields, Part 1: Maximum exposure levels - 3 kHz to 300 GHz | |
| Radiofrequency fields, Part 2: Principles and methods of measurement and computation - 3 kHz to 300 GHz | |
| Reporting outstanding orders (in the book trade) | |
| Safe working in a confined space | |
| Safes and strongrooms - Methods of test, Method 1: Test for physical attack | |
| Safes and strongrooms - Methods of test, Method 2: Test for anchoring strength | |
| Safes and strongrooms - Methods of test, Method 3: Test for explosive resistance | |
| Safes and strongrooms - Methods of test, Part 0: Introduction and list of methods | |
| Safes and strongrooms | |
| Safety of household and similar electrical appliances - Particular requirements - Dishwashers | |
| Safety of household and similar electrical appliances, Part 1: General requirements | |
| Safety of household and similar electrical appliances, Part 2.10: Particular requirements - Floor treatment machines and wet scrubbing machines | |
| Safety of household and similar electrical appliances, Part 2.11: Particular requirements - Tumble dryers | |
| Safety of household and similar electrical appliances, Part 2.12: Particular requirements - Warming plates and similar appliances | |
| Safety of household and similar electrical appliances, Part 2.13: Particular requirements - Deep fat fryers, frying pans and similar appliances | |
| Safety of household and similar electrical appliances, Part 2.14: Particular requirements for Kitchen machines | |
| Safety of household and similar electrical appliances, Part 2.15: Particular requirements - Appliances for heating liquids | |
| Safety of household and similar electrical appliances, Part 2.16: Particular requirements - Food waste disposers | |
| Safety of household and similar electrical appliances, Part 2.17: Particular requirements - Blankets, pads and similar flexible heating appliances (IEC 60335-2-17:1998, MOD) | |
| Safety of household and similar electrical appliances, Part 2.21: Particular requirements - Storage water heaters | |
| Safety of household and similar electrical appliances, Part 2.23: Particular requirements - Appliances for skin or hair care | |
| Safety of household and similar electrical appliances, Part 2.24: Particular requirements - Refrigerating appliances and ice-makers | |
| Safety of household and similar electrical appliances, Part 2.25: Particular requirements - Microwave ovens | |
| Safety of household and similar electrical appliances, Part 2.26: Particular requirements - Clocks | |
| Safety of household and similar electrical appliances, Part 2.27: Particular requirements - Appliances for skin exposure to ultraviolet and infrared radiation | |
| Safety of household and similar electrical appliances, Part 2.28: Particular requirements - Sewing machines | |
| Safety of household and similar electrical appliances, Part 2.29: Particular requirements - Battery chargers | |
| Safety of household and similar electrical appliances, Part 2.2: Particular requirements - Vacuum cleaners and water suction cleaning appliances | |
| Safety of household and similar electrical appliances, Part 2.30: Particular requirements - Room heaters | |
| Safety of household and similar electrical appliances, Part 2.31: Particular requirements - Range hoods | |
| Safety of household and similar electrical appliances, Part 2.32: Particular requirements - Massage appliances | |
| Safety of household and similar electrical appliances, Part 2.34: Particular requirements - Motor-compressors | |
| Safety of household and similar electrical appliances, Part 2.35: Particular requirements - Instantaneous water heaters | |
| Safety of household and similar electrical appliances, Part 2.3: Particular requirements - Electric irons | |
| Safety of household and similar electrical appliances, Part 2.40: Particular requirements - Electrical heat pumps, air-conditioners and dehumidifiers | |
| Safety of household and similar electrical appliances, Part 2.43: Particular requirements - Clothes dryers and towel rails | |
| Safety of household and similar electrical appliances, Part 2.44: Particular requirements - Ironers | |
| Safety of household and similar electrical appliances, Part 2.45: Particular requirements - Portable heating tools and similar appliances | |
| Safety of household and similar electrical appliances, Part 2.4: Particular requirements - Spin extractors | |
| Safety of household and similar electrical appliances, Part 2.51: Particular requirements - Stationary circulation pumps for heating and service water installations | |
| Safety of household and similar electrical appliances, Part 2.52: Particular requirements - Oral hygiene appliances | |
| Safety of household and similar electrical appliances, Part 2.53: Particular requirements - Sauna heating appliances | |
| Safety of household and similar electrical appliances, Part 2.54: Particular requirements - Surface-cleaning appliances employing liquids | |
| Safety of household and similar electrical appliances, Part 2.55: Particular requirements - Electrical appliances for use with aquariums and garden ponds | |
| Safety of household and similar electrical appliances, Part 2.56: Particular requirements - Projectors and similar appliances | |
| Safety of household and similar electrical appliances, Part 2.59: Particular requirements for insect killers | |
| Safety of household and similar electrical appliances, Part 2.60: Particular requirements for whirlpool baths (IEC 60335-2-60:1997, MOD) | |
| Safety of household and similar electrical appliances, Part 2.61: Particular requirements - Thermal storage room heaters | |
| Safety of household and similar electrical appliances, Part 2.65: Particular requirements - Air-cleaning appliances | |
| Safety of household and similar electrical appliances, Part 2.66: Particular requirements - Water-bed heaters | |
| Safety of household and similar electrical appliances, Part 2.6: Particular requirements - Stationary cooking ranges, hobs, ovens and similar appliances | |
| Safety of household and similar electrical appliances, Part 2.73: Particular requirements - Fixed immersion heaters | |
| Safety of household and similar electrical appliances, Part 2.74: Particular requirements - Portable immersion heaters | |
| Safety of household and similar electrical appliances, Part 2.75: Particular requirements - Commercial dispensing appliances and vending machines | |
| Safety of household and similar electrical appliances, Part 2.76: Particular requirements - Electric fence energizers | |
| Safety of household and similar electrical appliances, Part 2.78: Particular requirements - Outdoor barbecues | |
| Safety of household and similar electrical appliances, Part 2.79: Particular requirements - High pressure cleaners and steam cleaners, for industrial and commercial use | |
| Safety of household and similar electrical appliances, Part 2.7: Particular requirements - Washing machines | |
| Safety of household and similar electrical appliances, Part 2.80: Particular requirements - Electric fans | |
| Safety of household and similar electrical appliances, Part 2.81: Particular requirements - Foot warmers and heating mats | |
| Safety of household and similar electrical appliances, Part 2.82: Particular requirements for service machines and amusement machines (IEC 60335-2-82:1999, MOD) | |
| Safety of household and similar electrical appliances, Part 2.84: Particular requirements for toilets (IEC 60335-2-84:1998, MOD) | |
| Safety of household and similar electrical appliances, Part 2.85: Particular requirements - Fabric steamers | |
| Safety of household and similar electrical appliances, Part 2.8: Particular requirements - Shavers, hair clippers and similar appliances | |
| Safety of household and similar electrical appliances, Part 2.95: Particular requirements - Drives for vertically moving garage doors for residential use (IEC 60335-2-95:1998, MOD) | |
| Safety of household and similar electrical appliances, Part 2.97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment (IEC 60335-2-97:1998, MOD) | |
| Safety of household and similar electrical appliances, Part 2.98: Particular requirements - Humidifiers | |
| Slip resistance of pedestrian surfaces, Part 1: Requirements | |
| Slip resistance of pedestrian surfaces, Part 2: Guide to the reduction of slip hazards | |
| Solar and heat pump water heaters - Design and construction | |
| Structural steel - Hot-rolled plates, floorplates and slabs | |
| Structural steel, Part 1: Hot-rolled bars and sections | |
| Structural steel, Part 2: Welded I sections | |
| Supplementary cementitious materials for use with portland and blended cement, Part 3: Amorphous silica | |
| Supplementary cementitious materials, Part 1: Fly ash | |
| Suspended ceilings - Design and installation | |
| Tampons - Menstrual | |
| Technical management programs for medical devices | |
| Telecommunications installations - Administration of communications cabling systems, Part 1: Basic requirements | |
| Telecommunications installations - Generic cabling for commercial premises | |
| Telecommunications installations - Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with values set out in AS/NZS 3080:2000 | |
| Telecommunications installations - Generic cabling systems, Part 1: Specification for the testing of balanced communication cabling | |
| Telecommunications installations - Generic cabling systems, Part 2: Specification for the testing of patch cords in accordance with AS/NZS 3080 | |
| Telecommunications installations - Integrated telecommunications cabling systems for commercial premises | |
| Telecommunications installations - Integrated telecommunications cabling systems for small office/home office premises | |
| Telecommunications installations - Telecommunications pathways and spaces for commercial buildings | |
| Textile floor coverings - Cleaning maintenance of residential and commercial carpeting | |
| Textile floor coverings - Informative labelling | |
| The storage and handling of liquefied chlorine gas | |
| Timber - Classification into strength groups | |
| Timber drums for insulated electric cables and bare conductors | |
| Timber preservation plant safety code, Part 1: Plant design | |
| Timber preservation plant safety code, Part 2: Plant operation | |
| Training and certification of occupational divers, Part 2: Surface supplied diving to 30 m | |
| Training and certification of occupational divers, Part 5: Dive supervisor | |
| Training and certification of occupational divers, Part 6: Restricted occupational SCUBA diver | |
| Underground mining - Shaft equipment, Part 4: Conveyances for vertical shafts | |
| Underground mining - Shaft equipment, Part 6: Fixed guides, rope guides and rubbing ropes for conveyances | |
| Underground mining - Shaft equipment, Part 8: Conveyances for inclined shafts | |
| Water supply - Backflow prevention devices, Part 1: Materials, design and performance requirements | |
| Water supply - Backflow prevention devices, Part 3: Field testing and maintenance of testable devices | |
| Water supply - Metal-bodied taps - Specified by performance | |
| Water supply - Water efficient mains pressure shower spray heads | |
| Water supply \x96 Backflow preventions devices Part 2: Registered air gaps and registered break tanks | |
| Welding - Electrodes - Gas Metal Arc Part 1: Ferritic Steel Electrodes | |
| Welding - Electrodes - Gas metal arc, Part 1: Ferritic steel electrodes | |
| Welding - Methods for determination of the diffusible hydrogen content of ferritic weld metal produced by arc welding | |
| Welding and allied processes - Welding positions | |
| Wheelchairs, Part 14: Power and control systems for electric wheelchairs - Requirements and test methods | |
| Wheelchairs, Part 19: Wheeled mobility devices for use as seats in motor vehicles (ISO 7176-19:2008, MOD) | |
| Wheelchairs, Part 1: Determination of static stability | |
| Wheelchairs, Part 1: Requirements and test methods for manual wheelchairs | |
| Wheelchairs, Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and motorized scooters | |
| Wheelchairs, Part 22: Set-up procedures | |
| Wheelchairs, Part 23: Requirements and test methods for attendant-operated stair-climbing devices | |
| Wheelchairs, Part 24: Requirements and test methods for user-operated stair-climbing devices | |
| Wheelchairs, Part 2: Determination of dynamic stability of electric wheelchairs | |
| Wheelchairs, Part 2: Requirements and test methods for electrically powered wheelchairs (including mobility scooters) (Ruling 1 to AS/NZS 3695.2) | |
| Wheelchairs, Part 2: Requirements and test methods for electrically powered wheelchairs (including mobility scooters) | |
| Wheelchairs, Part 3: Determination of effectiveness of brakes | |
| Wheelchairs, Part 8: Requirements and test methods for static, impact and fatigue strengths | |
| Wheelchairs, Part 9: Climatic tests for electric wheelchairs (ISO 7176-9:2001, MOD) | |
| Wool - Determination of staple length and staple strength | |
| Wool - Subsampling staples from grab samples |
| << Prev | Next >> |