Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
210
220
230
240
250
252
253
254
255
256
257
258
259
260
261
262
263
264
270
280
290
300
310
320
350
400
450
500
550
600
1000
1500
1620
| Product Name | Notes |
|---|---|
| 10 percent aluminium bronze (copper-aluminium-ni ckel-iron) rods, sections, forging stock and forgings | |
| 3-in pitch corrugated hot-dipped galvanized (zinc-coated) steel sheets | |
| 60/40 brass rods, sections, forging stock and forgings | |
| 65/35 brass sheet and strip | |
| 88/10/2 bronze (gun-metal) ingots for general engineering purposes | |
| 88/10/2 bronze (gun-metal) sand and chilled castings for general engineering purposes | |
| 9 percent aluminium bronze (copper-aluminium) rods, sections, forging stock and forgings | |
| A Guide for the Control of Audible Sound Hazards | |
| Accessibility requirements suitable for public procurement of ICT products and services | |
| Acoustics - Measurement of sound insulation in buildings and of building elements - Laboratory measurements of impact sound insulation of floors | |
| Acoustics - Measurement of sound insulation in buildings and of building elements, Part 4: Field measurements of airborne sound insulation between rooms (ISO 140-4:1998, MOD) | |
| Acoustics - Measurement of sound insulation in buildings and of building elements, Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard... | |
| Acoustics - Procedures for the measurement of real-ear acoustical characteristics of hearing aids | |
| Acoustics - Rating of sound absorption - Materials and systems | |
| Acoustics \x97 Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms Part 2: Application to Type B elements when the junction... | |
| Active implantable medical devices, Part 1: General requirements for safety, marking and information to be provided by the manufacturer | |
| Adjustable speed electrical power drive systems Part 1: General requirements \x97 Rating specifications for low voltage adjustable speed DC power drive systems | |
| Adjustable speed electrical power drive systems Part 2: General requirements \x97 Rating specifications for adjustable speed AC power drive systems | |
| Adjustable speed electrical power drive systems Part 3: EMC requirements and specific test methods for PDS and machine tools | |
| Adjustable speed electrical power drive systems Part 5.1: Safety requirements\x97Elec trical, thermal and energy | |
| Adjustable speed electrical power drive systems Part 5.2: Safety requirements\x97Func tional | |
| Aerospace Standards Index - 2015 | |
| Aluminium alloy ingots and castings for general engineering purposes | |
| Aluminium alloy sections | |
| Aluminium ingots for remelting | |
| Aluminum Soldering Handbook | |
| Analysis techniques for dependability - Event tree analysis (ETA) | |
| Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) | |
| Analysis techniques for system reliability - Reliability block diagram and Boolean methods | |
| Animal tissues and their derivatives utilized in the manufacture of medical devices, Part 1: Analysis and management of risk | |
| Animal tissues and their derivatives utilized in the manufacture of medical devices, Part 2: Controls on sourcing, collection and handling | |
| Animal tissues and their derivatives utilized in the manufacture of medical devices, Part 3: Validation of the elimination and/or inactivation of viruses and transmissible agents | |
| Application of Markov techniques | |
| Assessment service delivery - Procedures and methods to assess people in work and organizational settings, Part 1: Requirements for the client | |
| Assessment service delivery - Procedures and methods to assess people in work and organizational settings, Part 2: Requirements for service providers | |
| Atmospheric icing of structures | |
| Basis for design of structures - Assessment of existing structures (ISO 13822:2001, MOD) | |
| Biological evaluation of medical devices - Establishment of allowable limits for leachable substances | |
| Biological evaluation of medical devices - Ethylene oxide sterilization residuals | |
| Biological evaluation of medical devices - Evaluation and testing | |
| Biological evaluation of medical devices - Framework for identification and quantification of potential degradation products | |
| Biological evaluation of medical devices - Identification and quantification of degradation products from ceramics | |
| Biological evaluation of medical devices - Identification and quantification of degradation products from metals and alloys | |
| Biological evaluation of medical devices - Identification and quantification of degradation products from polymeric medical devices | |
| Biological evaluation of medical devices - Sample preparation and reference materials | |
| Biological evaluation of medical devices - Selection and qualification of reference materials for biological tests | |
| Biological evaluation of medical devices - Selection of tests for interactions with blood | |
| Biological evaluation of medical devices - Tests for genotoxicity, carcinogenicity and reproductive toxicity | |
| Biological evaluation of medical devices - Tests for in vitro cytotoxicity | |
| Biological evaluation of medical devices - Tests for irritation and sensitization | |
| Biological evaluation of medical devices - Tests for local effects after implantation | |
| Biological evaluation of medical devices - Tests for systemic toxicity | |
| Biological evaluation of medical devices - Toxicokinetic study design for degradation products and leachables | |
| Blackheart malleable iron castings | |
| Brass bars (high speed screwing and turning) | |
| Brass bars and sections (suitable for forging) and drop forgings | |
| Building construction - Organization of information about construction works, Part 2: Framework for classification | |
| Capability of detection, Part 1: Terms and definitions | |
| Carbon and carbon-manganese steel forgings for general engineering purposes (ruling section up to and including 12 in) | |
| Carbon steel sheet rolled by the continuous process (coils and cutlengths) | |
| Cast aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear | |
| Cast brass bars (suitable for forging) and forgings | |
| Cast resin partitions for metal-enclosed gas-filled high-voltage switchgear and controlgear | |
| Ceramic tiles - Definitions, classification, characteristics and marking | |
| Ceramic tiles - Grouts and adhesives, Part 1: Terms, definitions and specifications for adhesives | |
| Ceramic tiles - Grouts and adhesives, Part 2: Test methods for adhesives | |
| Ceramic tiles - Grouts and adhesives, Part 3: Terms, definitions and specifications for grouts | |
| Ceramic tiles - Grouts and adhesives, Part 4: Test methods for grouts | |
| Ceramic tiles - Grouts and adhesives, Part 5: Requirements, test methods, evaluation of conformity, classification and designation of liquid-applied waterproofing membranes for use beneath ceramic tiling bonded with adhesives | |
| Ceramic tiles, Method 1: Sampling and basis for acceptance | |
| Ceramic tiles, Method 2: Determination of dimensions and surface quality | |
| Ceramic tiles, Method 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density | |
| Ceramic tiles, Method 4: Determination of modulus of rupture and breaking strength | |
| Ceramic tiles, Method 8: Determination of linear thermal expansion | |
| Ceramic tiles, Method 9: Determination of resistance to thermal shock | |
| Ceramic tiles, Part 16: Determination of small colour differences | |
| Ceramic tiles, Part 6: Determination of resistance to deep abrasion for unglazed tiles | |
| Characteristics of line post insulators (IEC 60720, Ed. 1.0 (1981) MOD) | |
| Characterization of pavement texture by use of surface profiles Part 2: Terminology and basic requirements related to pavement texture profile analysis | |
| Circular and non-circular carbon steel tubes for mechanical and general engineering purposes | |
| Clinical investigation of medical devices for human subjects | |
| Clinical investigation of medical devices | |
| Clinical investigations of medical devices for human subjects - General requirements | |
| Clinical thermometers, Part 2: Phase change type (dot matrix) thermometers | |
| Clinical thermometers, Part 3: Performance of compact electrical thermometers (non-predictive and predictive) with maximum device | |
| Clinical thermometers, Part 4: Performance of electrical thermometers for continuous measurement | |
| Coal - Guidance on the sampling of coal seams | |
| Cold rolled brass sheets, strip and foil, copper content 61.5 per cent minimum and under 64 per cent maximum (up to and including 3 S.W.G. (0.252 in.) thick) | |
| Cold rolled low carbon steel strip to temper designations (coils and cutlengths) | |
| Condition monitoring and diagnostics of machines - Prognostics, Part 1: General guidelines | |
| Consumer product recall - Guidelines for suppliers | |
| Consumer product safety - Guidelines for suppliers | |
| Copper alloy ingots and castings | |
| Copper concentrates - Determination of mercury content - Cold vapour atomic absorption spectrometric method | |
| Copper sulfide concentrates - Determination of copper content - Titrimetric methods | |
| Copper, lead and zinc ores and concentrates - Precision and bias of mass measurement techniques | |
| Copper, lead and zinc sulfide concentrates - Determination of gold and silver - Fire assay gravimetric and flame atomic absorption spectrometric method | |
| Copper, lead and zinc sulfide concentrates - Determination of transportable moisture limits - Flow-table method | |
| Copper, lead, zinc and nickel concentrates - Guidelines for the inspection of mechanical sampling systems | |
| Copper, lead, zinc and nickel concentrates - Sampling of slurries | |
| Copper, lead, zinc and nickel sulfide concentrates - Determination of mass of contained metal in a lot | |
| Copper, lead, zinc and nickel sulfide concentrates-Determi nation of arsenic, Part 1: Iron hydroxide concentration and inductively coupled plasma atomic emission spectrometric method | |
| Copper, lead, zinc and nickel sulfide concentrates-Determi nation of arsenic, Part 2: Acid digestion and inductively coupled plasma atomic emission spectrometric method | |
| Copper-silicon rods sections, forging stock and forgings | |
| Customer satisfaction - Guidelines for complaints handling in organizations (ISO 10002:2004, MOD) | |
| CYBER; Cyber security for consumer Internet of Things: Baseline requirements | |
| Dentistry - Medical devices for dentistry - Dental implants | |
| Dentistry - Medical devices for dentistry - Equipment | |
| Dentistry - Medical devices for dentistry - Materials | |
| Deoxidised and arsenical coppers - Phosphorus de-oxidised arsenical copper | |
| Deoxidised and arsenical coppers - Tough pitch arsenical copper | |
| Dependability management - Dependability management systems | |
| Dependability management - Guidance for dependability programme management | |
| Dependability management, Part 3.10: Application guide - Maintainability | |
| Dependability management, Part 3.11: Application guide - Reliability centred maintenance | |
| Dependability management, Part 3.12: Application guide - Integrated logistic support | |
| Dependability management, Part 3.14: Application guide - Maintenance and maintenance support | |
| Dependability management, Part 3.15: Application guide - Engineering of system dependability | |
| Dependability management, Part 3.1: Application guide - Analysis techniques for dependability - Guide on methodology | |
| Dependability management, Part 3.3: Application guide - Life cycle costing | |
| Design for All \x97 Accessibility following a Design for All approach in products, goods and services \x97 Extending the range of users | |
| Design review | |
| Determination of RF field strength, power density and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure | |
| Document management applications - Electronic document file format enhancement for accessibility, Part 1: Use of ISO 32000-1 (PDF/UA-1) | |
| Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply, Part 1: General EMC requirements under typical electromagnetic environmental conditions | |
| Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply, Part 2: Additional EMC requirements for functional safety | |
| Earth-moving machinery - Articulated frame lock - Performance requirements | |
| Earth-moving machinery - Auxiliary starting aid electrical connector | |
| Earth-moving machinery - Crawler machines - Performance requirements and test procedures for braking systems | |
| Earth-moving machinery - Determination of slope limits for machine fluid systems operation - Static test method | |
| Earth-moving machinery - Dumper body support and operator's cab tilt support devices | |
| Earth-moving machinery - Field of vision of surveillance and rear-view mirrors, Part 1: Test methods | |
| Earth-moving machinery - Field of vision of surveillance and rear-view mirrors, Part 2: Performance criteria | |
| Earth-moving machinery - Hour meters | |
| Earth-moving machinery - Hydraulic excavators - Laboratory tests and performance requirements for operator protective guards | |
| Earth-moving machinery - Key-locked starting systems | |
| Earth-moving machinery - Laboratory tests and performance requirements for protective structures of excavators, Part 2: Roll-over protective structures (ROPS) for excavators of over 6 t | |
| Earth-moving machinery - Lift-arm support devices | |
| Earth-moving machinery - Loaders and backhoe loaders, Part 1: Calculation of rated operating capacity and test method for verifying calculated tipping load | |
| Earth-moving machinery - Loaders and backhoe loaders, Part 2: Test method for measuring breakout forces and lift capacity to maximum lift height | |
| Earth-moving machinery - Machine-mounted retrieval device - Performance requirements | |
| Earth-moving machinery - Operation and maintenance - Maintainability guidelines | |
| Earth-moving machinery - Operator enclosure environment, Part 1: Terms and definitions | |
| Earth-moving machinery - Operator enclosure environment, Part 2: Air filter element test method | |
| Earth-moving machinery - Operator enclosure environment, Part 3: Pressurization test method | |
| Earth-moving machinery - Operator enclosure environment, Part 4: Heating, ventilating and air conditioning (HVAC) test method and performance | |
| Earth-moving machinery - Operator enclosure environment, Part 5: Windscreen defrosting system test method | |
| Earth-moving machinery - Operator enclosure environment, Part 6: Determination of effect of solar heating | |
| Earth-moving machinery - Operator's controls | |
| Earth-moving machinery - Operator's seat - Dimensions and requirements | |
| Earth-moving machinery - Product identification numbering system | |
| Earth-moving machinery - Retarders for dumpers and tractor-scrapers - Performance tests | |
| Earth-moving machinery - Sustainability - Terminology, sustainability factors and reporting | |
| Earth-moving machinery - Sustainability, Part 2: Remanufacturing | |
| Earth-moving machinery - Sustainability, Part 3: Used machines | |
| Earth-moving machinery - Tip-over protection structure (TOPS) for compact excavators - Laboratory tests and performance requirements | |
| Earth-moving machinery - Trenchers - Definitions and commercial specifications | |
| Earth-moving machinery \x97 Fire prevention guidance | |
| Electric vehicle conductive charging system, Part 23: D.C electric vehicle charging station | |
| Electric vehicle conductive charging system, Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging | |
| Electricity metering equipment (a.c.) - Particular requirements, Part 31: Pulse output devices for electromechanical and electronic meters (two wires only) | |
| Electricity metering equipment - Particular requirements, Part 41: Static meters for DC energy (classes 0.5 and 1) | |
| Electroacoustics - Audiological equipment - Equipment for extended high-frequency audiometry | |
| Electroacoustics - Audiological equipment, Part 1: Pure-tone audiometers (IEC 60645-1:2001, MOD) | |
| Electroacoustics - Audiological equipment, Part 2: Equipment for speech audiometry | |
| Electroacoustics - Audiological equipment, Part 3: Auditory test signals of short duration for audiometric and neuro-otological purposes | |
| Electroacoustics - Equipment for the measurement of real ear acoustical characteristics of hearing aids | |
| Electroacoustics - Octaveband and fractionaloctaveband filters, Part 1: Specifications | |
| Electroacoustics - Octaveband and fractionaloctaveband filters, Part 2: Pattern evaluation tests | |
| Electroacoustics - Octaveband and fractionaloctaveband filters, Part 3: Periodic tests | |
| Electroacoustics - Sound calibrators | |
| Electroacoustics - Sound level meters, Part 1: Specifications | |
| Electroacoustics - Sound level meters, Part 2: Pattern evaluation tests | |
| Electroacoustics \x97 Hearing aids Part 9: Methods of measurement of the performance characteristics of bone conduction hearing aids | |
| Electromagnetic compatibility (EMC), Part 4.1: Testing and measurement techniques - Overview of IEC 61000-4 series | |
| Electromagnetic compatibility (EMC), Part 4.5: Testing and measurement techniques - Surge immunity test | |
| Electromagnetic compatibility (EMC), Part 4.6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio frequency field | |
| Electromagnetic compatibility (EMC), Part 6.5: Generic standards - Immunity for equipment used in power station and substation environment | |
| End-quench test (Jominy test) for hardenability of steel | |
| Environmental labels and declarations - General principles | |
| Environmental labels and declarations - Self-declared environmental claims | |
| Environmental management - Life cycle assessment - Data documentation format | |
| Environmental management - Life cycle assessment - Principles and framework | |
| Environmental management - Life cycle assessment - Requirements and guidelines | |
| Environmental management - Vocabulary | |
| Environmental management systems - General guidelines on implementation | |
| Environmental testing Part 3.1: Supporting documentation and guidance \x97 Cold and dry heat tests | |
| Environmental testing Part 3.4: Supporting documentation and guidance \x97 Damp heat tests | |
| Environmental testing, Part 2.17: Tests - Test Q: Sealing | |
| Equipment reliability - Reliability assessment methods | |
| Eye and face protection - Sunglasses and related eyewear, Part 2: Filters for direct observation of the sun | |
| Fatigue \x97 Design procedure for welded hollow-section joints \x97 Recommendations | |
| Fault tree analysis (FTA) | |
| Financial services - Secure cryptographic devices (retail), Part 1: Concepts, requirements and evaluation methods | |
| Financial services - Secure cryptographic devices (retail), Part 2: Security compliance checklists for devices used in financial transactions | |
| Financial services \x97 Key management (retail) | |
| Fuel cell technologies Part 8.101: Energy storage systems using fuel cell modules in reverse mode \x97 Test procedures for the performance of solid oxide single cells and stacks, including reversible... | |
| Fuel cell technologies Part 8.102: Energy storage systems using fuel cell modules in reverse mode \x97 Test procedures for the performance of single cells and stacks with proton exchange membrane,... | |
| Fuel cell technologies Part 8.301: Energy storage systems using fuel cell modules in reverse mode \x97 Power-to-methane energy systems based on solid oxide cells including reversible operation \x97 Performance test... | |
| Functional safety - Safety instrumented systems for the process industry sector - Framework, definitions, systems, hardware and software requirements | |
| Functional safety - Safety instrumented systems for the process industry sector - Guidance for the determination of the required safety integrity levels | |
| Functional safety - Safety instrumented systems for the process industry sector - Guidelines for the application of AS IEC 61511-1 | |
| Gaseous fire-extinguishing systems - Physical properties and system design, Part 10: HFC 23 extinguishant (ISO 14520-10:2005, MOD) | |
| Gaseous fire-extinguishing systems - Physical properties and system design, Part 11: HFC 236fa extinguishant (ISO 14520-11:2005, MOD) | |
| Gaseous fire-extinguishing systems - Physical properties and system design, Part 12: IG-01 extinguishant (ISO 14520-12:2005, MOD) | |
| Gaseous fire-extinguishing systems - Physical properties and system design, Part 1: General requirements (ISO 14520-1:2006, MOD) | |
| Geometrical product specifications (GPS) - Indication of surface texture in technical product documentation | |
| Graphic technology - Displays for colour proofing - Characteristics and viewing conditions | |
| Graphic technology - Process control for the production of half-tone colour separations, proof and production prints, Part 1: Parameters and measurement methods | |
| Graphic technology - Process control for the production of half-tone colour separations, proof and production prints, Part 2: Offset lithographic processes | |
| Graphic technology - Process control for the production of half-tone colour separations, proof and production prints, Part 7: Proofing processes working directly from digital data | |
| Graphic technology - Process control for the production of half-tone colour separations, proof and production prints, Part 8: Validation print processes working directly from digital data | |
| Graphic technology - Process control for the production of half-tone colour separations, proofs and production prints, Part 3: Coldset offset lithography on newsprint | |
| Graphic technology - Vocabulary, Part 1: Fundamental terms | |
| Graphic technology - Vocabulary, Part 2: Prepress terms | |
| Graphic technology - Vocabulary, Part 3: Printing terms | |
| Graphic technology - Vocabulary, Part 4: Postpress terms | |
| Graphical symbols for use in diagrams for pipeline systems in ships for general services (known as Graphical Symbols for Ships Pipelines) | |
| Greenhouse gases - Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition | |
| Greenhouse gases, Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals | |
| Greenhouse gases, Part 2: Specification with guidance at the project level for quantification and reporting of greenhouse gas emission reductions and removal enhancements (ISO 14062-2:2006, MOD) | |
| Greenhouse gases, Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions | |
| Grey iron castings | |
| Guidance on human aspects of dependability | |
| Guidance on software aspects of dependability | |
| Guidance on statistical techniques for ISO 9001:2000 (ISO/TR 10017, Ed. 2.0 (2003) MOD) | |
| Guidance on system dependability specifications | |
| Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for non-active medical devices | |
| Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for the active (including active implantable) medical device industry. | |
| Guidance on the measurement of wettability of insulator surfaces | |
| Guidelines for implementation of statistical process control (SPC) - Elements of SPC | |
| Guidelines for quality management system documentation | |
| Guidelines for the selection of quality management system consultants and use of their services | |
| Guidelines for the selection of statistical methods in standardization and specification | |
| Hardened and tempered carbon steel bars for general engineering purposes | |
| Hazard and operability studies (HAZOP studies) - Application guide | |
| Health informatics - Telehealth services - Quality planning guidelines | |
| Health software, Part 1: General requirements for product safety | |
| High purity zinc | |
| High tensile brass bars and sections (grades A and B) | |
| High tensile brass forging stock and forgings | |
| High-current test techniques - Definitions and requirements for test currents and measuring systems | |
| High-voltage switchgear and controlgear, Part 105: Alternating current switch-fuse combinations for rated voltages above 1 kV up to and including 52 kV | |
| High-voltage switchgear and controlgear, Part 4: Handling procedures for sulphur hexafluoride (SF6) and its mixtures | |
| High-voltage test techniques, Part 1: General definitions and test requirements | |
| High-voltage test techniques, Part 2: Measuring systems | |
| Hoists for the transfer of disabled persons - Requirements and test methods | |
| Hot-dipped galvanized (zinc-coated) flat steel sheet (coils and cutlengths) | |
| Hot-rolled carbon and carbon-manganese steel plate for general engineering purposes based on chemical composition | |
| Hot-rolled carbon steel strip to strength and forming requirements | |
| Hot-rolled carbon steels and carbon-manganese steels | |
| Hot-rolled spring steels | |
| IDENTIFICATION OF FRIENDLY SUBMARINES (IFS) | |
| Industrial automation systems and integration - Parts library, Part 101: Geometrical view exchange protocol by parametric program | |
| Industrial automation systems and integration - Parts library, Part 1: Overview and fundamental principles | |
| Industrial automation systems and integration - Parts library, Part 20: Logical resource: Logical model of expressions | |
| Industrial automation systems and integration - Parts library, Part 24: Logical resource: Logical model of supplier library | |
| Industrial automation systems and integration - Parts library, Part 26: Logical resource: Information supplier identification | |
| Industrial automation systems and integration - Parts library, Part 31: Implementation resources: Geometric programming interface | |
| Industrial automation systems and integration - Parts library, Part 42: Description methodology: Methodology for structuring pt families | |
| Industrial automation systems and integration - Product data representation and exchange, Part 104: Integrated application resource: Finite element analysis | |
| Industrial automation systems and integration - Product data representation and exchange, Part 210: Application protocol: Electronic assembly, interconnection, and packaging design | |
| Industrial communication networks \x97 Network and system security Part 2.1: Establishing an industrial automation and control system security program | |
| Industrial communication networks \x97 Network and system security Part 3.3: System security requirements and security levels | |
| Instrument transformers Part 99: Glossary | |
| Insulators - Ceramic or glass - Hollow pressurized and unpressurized - Voltages greater than 1000 V a.c. | |
| Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic insulators for a.c. systems - Characteristics of insulator units of the long rod type | |
| Interpreting services \x97 Community interpreting \x97 Requirements and recommendations | |
| Leaded brass strip for use in the manufacture of parts for clocks and watches and for other instruments | |
| Lung ventilators for medical use - Particular requirements for home care ventilators | |
| Lung ventilators for medical use - Particular requirements for operator-powered resuscitators | |
| Lung ventilators for medical use - Requirements | |
| Lung ventilators for medical use, Part 3: Particular requirements for emergency and transport ventilators | |
| Management of alarm systems for the process industries | |
| Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices, Part 3: Vector measurement-based systems (Frequency range... | |
| Medical devices - Validation and routine control of ethylene oxide sterilization | |
| Medical electrical equipment, Part 1.10: General requirements for basic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loop controllers | |
| Medical electrical equipment, Part 1.11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare... | |
| Medical electrical equipment, Part 1.12: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the... | |
| Medical electrical equipment, Part 1.2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests | |
| Medical electrical equipment, Part 1.6: General requirements for basic safety and essential performance - Collateral standard: Usability | |
| Medical electrical equipment, Part 1.8: General requirements for basic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical... | |
| Medical electrical equipment, Part 1.9: General requirements for basic safety and essential performance - Collateral Standard: Requirements for environmentally conscious design | |
| Medical electrical equipment, Part 2.22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment | |
| Medical electrical equipment, Part 2.57: Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use | |
| Methods of measurement of touch current and protective conductor current | |
| Milk - Determination of fat content - Gravimetric method (Reference method) | |
| Natural gas - Standard reference conditions | |
| Naval brass (admiralty mixture) bars and sections | |
| Naval brass (special mixture) bars and sections (suitable for machining and forging) and forgings | |
| Non-invasive sphygmomanometers, Part 1: General requirements | |
| Non-invasive sphygmomanometers, Part 2: Supplementary requirements for mechanical sphygmomanometers | |
| Non-invasive sphygmomanometers, Part 3: Supplementary requirements for electromechanical blood pressure measuring systems | |
| Obsolescence management - Application guide | |
| Offshore containers and associated lifting sets, Part 1: Offshore containers - Design, manufacture and marking (EN 12079-1:2006, MOD) | |
| Offshore containers and associated lifting sets, Part 2: Lifting sets - Design, manufacture and marking (EN 12079-2:2006, MOD) | |
| Offshore containers and associated lifting sets, Part 3: Periodic inspection, examination and testing (EN 12079-3:2006, MOD) | |
| Ophthalmic optics - Semi-finished spectacle lens blanks, Part 1: Specifications for single-vision and multifocal lens blanks | |
| Ophthalmic optics - Semi-finished spectacle lens blanks, Part 2: Specifications for progressive-power and degressive-power lens blanks | |
| Opthalmic implants - Intraocular lenses - Biocompatibility | |
| Opthalmic implants - Intraocular lenses - Clinical investigations | |
| Opthalmic implants - Intraocular lenses - Fundamental requirements | |
| Opthalmic implants - Intraocular lenses - Labelling and information | |
| Opthalmic implants - Intraocular lenses - Shelf-life and transport stability | |
| Opthalmic implants - Intraocular lenses - Vocabulary | |
| Opthalmic implants - Intraocular lenses, Part 2: Optical properties and test methods | |
| Opthalmic implants - Intraocular lenses, Part 3: Mechanical properties and test methods | |
| Pearlitic malleable iron castings | |
| Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines | |
| Petroleum and natural gas industries - Field testing of drilling fluids, Part 1: Water-based fluids | |
| Petroleum and natural gas industries \x97 Completion fluids and materials Part 1: Measurement of viscous properties of completion fluids | |
| Petroleum and natural industries - Drilling fluids - Laboratory testing | |
| Petroleum, petrochemical and natural gas industries - Collection and exchange of reliability and maintenance data for equipment | |
| Phosphor bronze bars and rods for general purposes | |
| Phosphorus de-oxidised non-arsenical copper for general purposes | |
| Photography - Digital still cameras - Determination of exposure index, ISO speed ratings, standard output sensitivity, and recommended exposure index | |
| Photography - Electronic still picture imaging - Resolution and spatial frequency responses | |
| Photography - Electronic still picture imaging - Vocabulary | |
| Photography - Electronic still picture imaging terminology, Part 1: Supplemental vocabulary | |
| Playing field equipment - Football goals - Functional and safety requirements, test methods | |
| Playing field equipment - Portable and permanent socketed goals - Functional, safety requirements and test methods | |
| Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles, Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories | |
| Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria | |
| Powered industrial trucks - Test methods for verification of visibility, Part 1: Sit-on and stand-on operator trucks and variable-reach trucks up to and including 10 t capacity | |
| Programmable controllers - Communications | |
| Programmable controllers - Equipment requirements and tests | |
| Programmable controllers - Fuzzy control programming | |
| Programmable controllers - General information | |
| Programmable controllers - Guidelines for the application and implementation of programming languages | |
| Programmable controllers - Programming languages | |
| Programmable controllers - User guidelines | |
| Programmable controllers, Part 6: Functional safety | |
| Programmable controllers, Part 9: Single-drop digital communication interface for small sensors and actuators (SDCI) | |
| Programmes for reliability growth | |
| Protection of persons and equipment by enclosures - Probes for verification | |
| Quality management - Guidelines for quality plans | |
| Quality management - Guidelines for training (ISO 10015, MOD) | |
| Quality management systems - Guidelines for configuration management | |
| Quality management systems - Guidelines for quality management in projects | |
| Quality management systems - Guidelines for realizing financial and economic benefits | |
| Quality systems - Medical devices - Particular requirements for the application of ISO 9001 | |
| Quality systems - Medical devices - Particular requirements for the application of ISO 9002 | |
| Quality systems - Medical devices - Particular requirements for the application of ISO 9003 | |
| Radio interference test on high-voltage insulators | |
| Recommended methods for polarographic and spectrographic analysis of high purity zinc and zinc alloys for die casting | |
| Reliability growth - Statistical test and estimation methods | |
| Rotating electrical machines, Part 12: Starting performance of single-speed three-phase cage induction motors | |
| Rotating electrical machines, Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification | |
| Rotating electrical machines, Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code) | |
| Safety requirements for bonded abrasive products | |
| Safety requirements for coated abrasive products | |
| Safety requirements for power electronic converter systems and equipment, Part 1: General | |
| Sampling and analysis of high purity zinc and zinc alloys for die casting | |
| Schedule of copper and copper alloys - forging stock and forgings | |
| Schedule of copper and copper alloys - rods and sections (other than forging stock) | |
| Schedule of steel sheet for automobiles and deep drawings | |
| Schedule of tool steel compositions | |
| Seamless brass tubes for general purposes - Hard drawn seamless brass tubes (ultimate tensile stress 25 to 35 tons per inch(sup)2) | |
| Secondary cells and batteries containing alkaline and other non-acid electrolytes - Sealed nickel-cadmium prismatic rechargeable single cells | |
| Secondary cells and batteries containing alkaline and other non-acid electrolytes - Vented nickel-cadmium prismatic rechargeable single cells | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications | |
| Security for industrial automation and control systems Part 2.4: Security program requirements for IACS service providers | |
| Security for industrial automation and control systems Part 3.2: Security risk assessment for system design | |
| Security for industrial automation and control systems Part 4.1: Secure product development lifecycle requirements | |
| Security for industrial automation and control systems Part 4.2: Technical security requirements for IACS components | |
| Skateparks - Safety requirements and test methods | |
| Small craft - Remote hydraulic steering systems | |
| Smart cities reference architecture methodology | |
| Smart city standards inventory and mapping, Part 1: Methodology | |
| Smart city system - Methodology for concepts building | |
| Smart city use case collection and analysis \x97 City information modelling Part 1: High-level analysis | |
| Soil quality \x97 Vocabulary | |
| Specification for aircraft material (emergency series) 10 per cent copper-aluminium alloy castings (heat treated) | |
| Specification for aircraft material (emergency series) 35 ton chromium-nickel non-corrodible steel tubes (suitable for pipe lines) | |
| Specification for aircraft material (emergency series) 35-ton chrome-molybdenum steel tubes (suitable for welding) | |
| Specification for aircraft material (emergency series) 45-ton chrome-molybdenum steel tubes (suitable for welding) | |
| Specification for aircraft material (emergency series) 50 ton chromium-nickel non-corrodible steel tubes | |
| Specification for aircraft material (emergency series) 50 ton non-corrodible steel tubes | |
| Specification for aircraft material (emergency series) 50-ton chrome-molybdenum steel tubes (suitable for welding) | |
| Specification for aircraft material (emergency series) 7/1 aluminium alloy castings (specific gravity between 2.87 and 2.93) | |
| Specification for aircraft material (emergency series) 99 Percent aluminium bars and sections | |
| Specification for aircraft material (emergency series) aluminium alloy (5 percent silicon) welding wire | |
| Specification for aircraft material (emergency series) aluminium alloy bars and forgings (greater than 3 inches diameter or width across flats or minor sectional dimension) (specific gravity not greater than 2.80)... | |
| Specification for aircraft material (emergency series) aluminium alloy bars and forgings (greater than 3 inches diameter or width across flats or minor sectional dimension) for aircraft purposes (specific gravity not... | |
| Specification for aircraft material (emergency series) aluminium alloy bars and sections | |
| Specification for aircraft material (emergency series) aluminium alloy bars, billets and forgings (suitable for airscrew blades and general forgings) | |
| Specification for aircraft material (emergency series) aluminium alloy bars, billets and forgings (suitable for engine crankcases) | |
| Specification for aircraft material (emergency series) aluminium alloy bars, extruded sections and forgings (not exceeding 3 inches diameter or minor sectional dimension) | |
| Specification for aircraft material (emergency series) aluminium alloy bars, extruded sections and forgings (not greater than 3 inches diameter or minor sectional dimension) for aircraft purposes (specific gravity not greater... | |
| Specification for aircraft material (emergency series) aluminium alloy bars, extruded sections and forgings (not greater than 3 inches diameter or minor sectional dimension) | |
| Specification for aircraft material (emergency series) aluminium alloy rivets (specific gravity not greater than 2.85) | |
| Specification for aircraft material (emergency series) aluminium alloy round seamless tubes | |
| Specification for aircraft material (emergency series) aluminium alloy sand or die castings (as cast) (suitable for pistons, etc.) | |
| Specification for aircraft material (emergency series) aluminium alloy sand or die castings (heat treated) | |
| Specification for aircraft material (emergency series) aluminium alloy sand or die castings (heat-treated) (not suitable for pistons) | |
| Specification for aircraft material (emergency series) aluminium alloy sheets and coils (specific gravity not greater than 2.85) | |
| Specification for aircraft material (emergency series) aluminium alloy sheets and strips (specific gravity not greater than 2.85) | |
| Specification for aircraft material (emergency series) aluminium rivets (specific gravity not greater than 2.75) | |
| Specification for aircraft material (emergency series) aluminium tubes | |
| Specification for aircraft material (emergency series) aluminium welding wire | |
| Specification for aircraft material (emergency series) aluminium-nickel-sil icon brass tubes (low pressure) | |
| Specification for aircraft material (emergency series) aluminium-nickel-sil icon brass tubes (medium pressure) | |
| Specification for aircraft material (emergency series) aluminium-silicon alloy sand or die castings (heat treated) | |
| Specification for aircraft material (emergency series) aluminium-silicon alloy sand or die castings (suitable for welding) | |
| Specification for aircraft material (emergency series) aluminium-zinc-coppe r alloy castings (specific gravity between 2.95 and 3.05) | |
| Specification for aircraft material (emergency series) brass bars suitable to be brazed or silver soldered | |
| Specification for aircraft material (emergency series) brass tubes for honeycomb type radiators for aircraft purposes | |
| Specification for aircraft material (emergency series) chrome-molybdenum steel bars for machining | |
| Specification for aircraft material (emergency series) chromium bronze bars, extruded sections and tubes (suitable for engine valve guides, etc) | |
| Specification for aircraft material (emergency series) chromium-nickel corrosion-resisting steel sheets (suitable for welding) (primarily for exhaust manifolds, etc.) | |
| Specification for aircraft material (emergency series) chromium-nickel non-corrodible steel of 15 tons 0.1 per cent proof stress | |
| Specification for aircraft material (emergency series) chromium-vanadium steel wire for valve springs | |
| Specification for aircraft material (emergency series) half-hard aluminium alloy sheets and strips | |
| Specification for aircraft material (emergency series) half-hard aluminium sheets | |
| Specification for aircraft material (emergency series) hard aluminium sheets | |
| Specification for aircraft material (emergency series) low carbon chromium-nickel corrosion-resisting steel sheets (suitable for welding) (not suitable for operating temperatures exceeding 350 Degrees Celcius | |
| Specification for aircraft material (emergency series) mercerised cotton fabric | |
| Specification for aircraft material (emergency series) mild steel sheets (suitable for welding) (for low stressed aircraft parts) | |
| Specification for aircraft material (emergency series) oil-impregnated sintered bronze in the form of bearings, bushes and thrust washers | |
| Specification for aircraft material (emergency series) phosphor bronze castings for bearings (including solid and cored sticks) | |
| Specification for aircraft material (emergency series) seamless copper tubes for oil, petrol, gas starters and general purposes | |
| Specification for aircraft material (emergency series) silicon aluminium alloy castings (fully heat-treated) | |
| Specification for aircraft material (emergency series) silicon-aluminium alloy forgings for engine cylinders and pistons | |
| Specification for aircraft material (emergency series) silver quandong | |
| Specification for aircraft material (emergency series) soft aluminium sheets | |
| Specification for aircraft material (emergency series) spring steel strips | |
| Specification for aircraft material (emergency series) steel wire for springs (not suitable for engine valve springs) | |
| Specification for aircraft material (emergency series) Y aluminium alloy castings (heat treated) (specific gravity not greater than 2.85) | |
| Specification for aircraft material (emergency series) Y aluminium alloy castings (specific gravity not greater than 2.85 | |
| Specification for aircraft materials (emergency series) chrome-molybdenum steel sheets (not intended for welding) | |
| Specification for aircraft materials (emergency series) hoop pine plywood | |
| Specification for austenitic cast iron | |
| Specification for bright carbon steel and carbon-manganese steel bars | |
| Specification for carbon steel bars for the manufacture of hot-forged rivets | |
| Specification for carbon steel wire for the manufacture of cold-forged rivets | |
| Specification for cold rolled brass sheet, strip and foil - 70/30 brass | |
| Specification for cold rolled copper sheets and strip (half-hard and annealed) for general purposes (up to and including 3 SWG (O.252 inches) thick and 42 inches wide) | |
| Specification for cold-forged steel rivets (not exceeding 1/2 inch in diameter) | |
| Specification for copper plates for general purposes (including boilersand locomotive fireboxes) | |
| Specification for copper-nickel sheet, strip and foil | |
| Specification for hot-forged steel rivets (not exceeding 2 inches in diameter) | |
| Specification for identification colours for engine room piping | |
| Specification for iron castings with spheroidal or nodular graphite | |
| Specification for marine flanges | |
| Specification for Naval brass sheet, strip and plate (excluding Navalbrass condenser plate) | |
| Specification for nickel silver sheet, strip and foil | |
| Specification for nickel silver strip and foil for the telecommunicationind ustries | |
| Specification for phosphor bronze (copper-tin-phosphor us) sheet, stripand foil | |
| Specification for reinforced plastics boats | |
| Specification for wrought alloy steels of the AISI-SAE H steel type | |
| Specification for wrought alloy steels of the AISI-SAE standard steels type | |
| Specification for wrought alloy steels of the BS 970 En series type | |
| Specifications for cold rolled brass sheets, strip and foil - BZ103 80/20 brass | |
| Specifications for cold rolled brass sheets, strip and foil - CZ10190/10 brass | |
| Specifications for cold rolled brass sheets, strip and foil - CZ10285/15 brass | |
| Sports and recreational equipment - Parkour equipment - Safety requirements and test methods | |
| Stainless and heat-resisting steel plate, sheet and strip of the AISI-SAE standard steels type (coils and cut lengths) | |
| Standard for Professional Water Damage Restoration | |
| Standard voltages | |
| Stationary source emissions \x97 Determination of odour concentration by dynamic olfactometry and odour emission rate (Supplement to AS EN 13725:2025) | |
| Stationary source emissions \x97 Determination of odour concentration by dynamic olfactometry and odour emission rate | |
| Statistical interpretation of data - Tests and confidence intervals relating to proportions | |
| Steel castings for general engineering puposes | |
| Steel for die blocks for drop forging | |
| Sterile, single-use intravascular catheters - General requirements | |
| Sterilization of health care products - Requirements for validation and routine control - Industrial moist heat sterilization | |
| Sterilization of health care products - Requirements for validation and routine control - Radiation sterilization | |
| Sterilization of medical devices - Estimation of the population of micro-organisms on product, Part 1: Requirements | |
| Sterilization of medical devices - Estimation of the population of micro-organisms on product, Part 2: Guidance | |
| Sterilization of medical devices - Estimation of the population of micro-organisms on product, Part 3: Guide to the methods for validation of microbiological techniques | |
| Sterilization of medical devices - Requirements for medical devices to be designated 'STERILE', Part 1: Requirements for terminally sterilized medical devices | |
| Sterilization of single-use medical devices incorporating materials of animal origin - Validation and routine control of sterilization by liquid sterilants | |
| Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials | |
| Technical aids for disabled persons - General requirements and test methods | |
| Technical drawings - General principles of presentation, Part 1: Introduction and index | |
| Technical drawings - General principles of presentation, Part 20: Basic conventions for lines | |
| Technical drawings - General principles of presentation, Part 21: Preparation of lines by CAD systems | |
| Technical drawings - General principles of presentation, Part 22: Basic conventions and applications for leader lines and reference lines | |
| Technical drawings - General principles of presentation, Part 23: Lines on construction drawings | |
| Technical drawings - General principles of presentation, Part 24: Lines on mechanical engineering drawings | |
| Technical drawings - General principles of presentation, Part 25: Lines on shipbuilding drawings | |
| Terne-coated steel sheet (cut lengths) | |
| The determination of the austenite grain size of steels comparison method | |
| The international system of units (SI) and its application | |
| Uninterruptible power systems (UPS), Part 2: Electromagnetic compatibility (EMC) requirements | |
| Uninterruptible power systems (UPS), Part 3: Method of specifying the performance and test requirements | |
| Welded composite enclosures of cast and wrought aluminium alloys for gas-filled high-voltage switchgear and controlgear | |
| Welding - Guide on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature | |
| Whiteheart malleable iron castings | |
| Wind turbines, Part 2: Design requirements for small wind turbines | |
| Wrought aluminium and aluminium alloy drawn tubes and hollow sections for general engineering purposes | |
| Wrought aluminium and aluminium alloy drawn wire for general engineering purposes | |
| Wrought aluminium and aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear | |
| Wrought aluminium and aluminium alloy extruded bars, rods, and solid sections for general engineering purposes | |
| Wrought aluminium and aluminium alloy extruded tubes and hollow sections for general engineering purposes | |
| Wrought aluminium and aluminium alloy flat and coiled sheet for general engineering purposes | |
| Wrought aluminium and aluminium alloy plate for general engineering purposes | |
| Wrought aluminium and aluminium alloys - forgings | |
| Zinc alloy die castings | |
| Zinc alloys in ingot form for die casting |
| << Prev | Next >> |