Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
210
220
230
240
250
259
260
261
262
263
264
265
266
267
268
269
270
271
280
290
300
310
320
330
350
400
450
500
550
600
1000
1500
1620
| Product Name | Notes |
|---|---|
| 121.5 and 243.0 MHz emergency position indicating radio beacons (EPIRBs) including personal EPIRBs | |
| 406 MHz satellite distress beacons, Part 1: Marine emergency position indicating radio beacons (EPIRBs) (IEC 61097-2:1994, MOD) | |
| 406 MHz satellite distress beacons, Part 2: Personal locator beacons (PLBs) | |
| 406 MHz satellite distress beacons | |
| Abrasive belts - Dimensions, tolerances and designation | |
| Abrasive belts - Selection of width/length combinations | |
| Abrasive grains - Determination of capillarity | |
| Abrasive grains - Sampling and splitting | |
| Abrasive grains - Test-sieving machines | |
| Abrasive grains and crudes - Chemical analysis of silicon carbide | |
| Abrasive products - Diamond or cubic boron nitride grinding wheels - Dimensions | |
| Abrasive products - Diamond or cubic boron nitride grinding wheels and saws - General survey, designation and multilingual nomenclature | |
| Abrasive products - Segmented saws for machining of stone and masonry cutting - Dimensions of steel blades | |
| Abrasive sheets - Dimensions, tolerances and designation | |
| Abrasives products - Grain sizes of diamond or cubic boron nitride 41 micrometres to 1180 micrometres | |
| Accessories for electric cables - Test requirements - Impregnated paper-insulated metal-sheathed cables for rated voltages from 1.9/3.3 (3.6) kV up to 19/33 (36) kV (excluding gas-pressure and oil-filled cables) | |
| Accessories for electric cables - Test requirements, Part 1: Power cables with extruded insulation for rated voltages from 1.9/3.3(3.6) kV up to and including 19/33(36) kV | |
| Acoustics - Octave-band and fractional-octave-ba nd-filters | |
| Adhesives, phenolic and aminoplastic for load-bearing timber structures: Classification and performance requirements | |
| Ambulance restraint systems | |
| Amplitude modulated equipment for use in the aeronautical radio service in the frequency range 118 MHz to 137 MHz | |
| Analogue speech (angle modulated) equipment operating in land mobile and fixed services bands in the frequency range 29.7 MHz to 1 GHz | |
| Automotive brake testing equipment - Roller brake tester | |
| Bonded abrasive products - Dimensions - Grinding wheels for cutting-off on an angle grinder | |
| Bonded abrasive products - Dimensions, Part 10: Honing stones and superfinishings | |
| Bonded abrasive products - Dimensions, Part 11: Hand finishing sticks | |
| Bonded abrasive products - Dimensions, Part 12: Grinding wheels for deburring and fettling on a straight grinder | |
| Bonded abrasive products - Dimensions, Part 13: Grinding wheels for deburring and fettling on a vertical grinder | |
| Bonded abrasive products - Dimensions, Part 14: Grinding wheels for deburring and fettling/snagging on an angle grinder | |
| Bonded abrasive products - Dimensions, Part 15: Grinding wheels for cutting-off on cutting-off machines or swing frame machines | |
| Bonded abrasive products - Dimensions, Part 1: Grinding wheels for external cylindrical grinding between centres | |
| Bonded abrasive products - Dimensions, Part 2: Grinding wheels for centreless external cylindrical grinding | |
| Bonded abrasive products - Dimensions, Part 3: Grinding wheels for internal cylindrical grinding | |
| Bonded abrasive products - Dimensions, Part 4: Grinding wheels for surface grinding/peripheral grinding | |
| Bonded abrasive products - Dimensions, Part 5: Grinding wheels for surface grinding/side grinding | |
| Bonded abrasive products - Dimensions, Part 6: Grinding wheels for tools and tool room grinding | |
| Bonded abrasive products - Dimensions, Part 7: Grinding wheels for off-hand grinding | |
| Bonded abrasive products - Dimensions, Part 8: Grinding wheels for deburring and fettling/snagging | |
| Bonded abrasive products - Dimensions, Part 9: Grinding wheels for high-pressure grinding | |
| Bonded abrasive products - General - Designation, marking, range of outside diameters and tolerances | |
| Bonded abrasive products - Permissible unbalances of grinding wheels as delivered - Testing | |
| Bonded abrasives - Determination and designation of grain size distribution, Part 1: Macrogrits F4 to F220 | |
| Bonded abrasives - Determination and designation of grain size distribution, Part 2: Microgrits F230 to F1200 | |
| Cable trunking systems | |
| Cables - Fire performance | |
| Cargo restraint systems - Transport chain and components | |
| Cargo restraint systems - Transport fibre rope | |
| Cargo restraint systems - Webbing load restraint systems | |
| Ceramic tableware | |
| Characteristics and test conditions of radionuclide imaging devices - Anger type gamma cameras | |
| Child carrier seats for pedal bicycles - Safety requirements | |
| Coated abrasive products - Dimensional tolerances on non-standard conversions | |
| Coated abrasives - Cloth rolls up to and including 40 mm width - Designation and dimensions | |
| Coated abrasives - Flap wheels with incorporated flanges or separate flanges - Designation and dimensions | |
| Coated abrasives - Flap wheels with shafts - Dimensions and designation | |
| Coated abrasives - General purpose rolls - Any backing - Designation and dimensions | |
| Coated abrasives - Rolls for widths of 50 mm and greater - Any backing - Designation and dimensions | |
| Code of practice for handling combustible dusts | |
| Cold-formed stainless steel structures | |
| Cold-formed steel structures - Commentary (Supplement to AS/NZS 4600:1996) | |
| Cold-formed steel structures | |
| Competencies for working with electrical equipment for hazardous areas (EEHA), Part 1: Competency Standards | |
| Competencies for working with electrical equipment for hazardous areas (EEHA), Part 1: Units of competency | |
| Competencies for working with electrical equipment for hazardous areas (EEHA), Part 2: Guide for training and assessment | |
| Competencies for working with electrical equipment for hazardous areas (EEHA), Part 2: Requirements for a structured program to develop competency | |
| Competencies for working with electrical equipment for hazardous areas (EEHA), Part 3: Modules supporting training | |
| Competencies for working with electrical equipment for hazardous areas (EEHA), Part 4: Assessing competency | |
| Compression and mechanical connectors for power cables with copper or aluminium conductors, Part 1: Test methods and requirements | |
| Connectors - Insulation piercing - For 0.6/1 kV aerial bundled cables | |
| Control of the obtrusive effects of outdoor lighting | |
| Cross recessed countersunk (flat) head tapping screws (common head style) | |
| Cross recessed pan head tapping screws | |
| Cross recessed raised countersunk (oval) head tapping screws | |
| Damp-proof courses and flashings - Methods of test, Method 10: Determination of mass of desaturated base and percentage saturation | |
| Damp-proof courses and flashings - Methods of test, Method 1: Determination of water permeability | |
| Damp-proof courses and flashings - Methods of test, Method 2: Determination of continuity of coating on metal centres | |
| Damp-proof courses and flashings - Methods of test, Method 3: Determination of pliability of bitumen coating on metal centres | |
| Damp-proof courses and flashings - Methods of test, Method 4: Determination of pliability - Materials with fabric or felt base | |
| Damp-proof courses and flashings - Methods of test, Method 5: Determination of compression properties | |
| Damp-proof courses and flashings - Methods of test, Method 6: Determining impact resistance (falling dart impact test) | |
| Damp-proof courses and flashings - Methods of test, Method 7: Determination of thickness of bitumen coating and thickness or mass of metallic centre | |
| Damp-proof courses and flashings - Methods of test, Method 8: Preparation of coating bitumen for testing | |
| Damp-proof courses and flashings - Methods of test, Method 9: Determining thickness | |
| Damp-proof courses and flashings - Methods of test, Part 0: General introduction, list of methods and test specimen requirements | |
| Demand response capabilities and supporting technologies for electrical products Part 3.3: Interaction of demand response enabling devices and electrical products-Operational instructions and connections for electric storage and electric-boosted storage water... | |
| Demand response capabilities and supporting technologies for electrical products, Part 1: Demand Response Framework and requirements for Demand Response Enabling Devices (DREDs) | |
| Demand response capabilities and supporting technologies for electrical products, Part 3.1: Interaction of demand response enabling devices and electrical products - Operational instructions and connections for air conditioners | |
| Demand response capabilities and supporting technologies for electrical products, Part 3.2: Interaction of demand response enabling devices and electrical products - Operational instructions and connections for devices controlling swimming pool... | |
| Demand response capabilities and supporting technologies for electrical products, Part 3.5: Interaction of demand response enabling devices and electrical products - Operational instructions and connections for grid-connected electrical energy storage... | |
| Design and installation of revolving doors | |
| Digital broadcasting systems for television, sound and data services - Framing structure, channel coding and modulation for 11/12 GHz satellite services | |
| Digital broadcasting systems for television, sound and data services - Framing structure, channel coding and modulation for cable systems | |
| Digital radio equipment operating in land mobile and fixed services bands in the frequency range 29.7 MHz to 1 GHz, Part 1: Radiofrequency requirements | |
| Digital radio equipment operating in land mobile and fixed services bands in the frequency range 29.7 MHz to 1 GHz, Part 2: Methods of test (IEC 60489-6:1999, MOD) | |
| Digital radio equipment operating in land mobile and fixed services bands in the frequency range 29.7 MHz to 1 GHz, Part 3: Application of recognized Standards | |
| Discharge of commercial and industrial liquid waste to sewer - General performance requirements | |
| Domestic garage doors - Methods of test, Method 1: Test sample and preparation of wind pressure test | |
| Domestic garage doors - Methods of test, Method 2: Wind pressure test | |
| Domestic garage doors - Methods of test, Method 3: Durability cycle test | |
| Domestic garage doors - Methods of test, Part 0: Introduction and list of methods | |
| Domestic garage doors | |
| Domestic kitchen assemblies - Methods of test, Method 10: Determination of slam open of drawers | |
| Domestic kitchen assemblies - Methods of test, Method 11: Determination of slam shut of drawers | |
| Domestic kitchen assemblies - Methods of test, Method 12: Determination of retention of the bottom surface of drawers | |
| Domestic kitchen assemblies - Methods of test, Method 13: Determination of wear and fatigue of drawers, sliding shelves and runners | |
| Domestic kitchen assemblies - Methods of test, Method 14: Determination of strength of handles | |
| Domestic kitchen assemblies - Methods of test, Method 15: Determination of the strength of support frames for wall attachment devices | |
| Domestic kitchen assemblies - Methods of test, Method 16: Determination of calibration of drawer slamming apparatus | |
| Domestic kitchen assemblies - Methods of test, Method 1: Determination of strength of carcass and underframe | |
| Domestic kitchen assemblies - Methods of test, Method 2: Determination of shelf deflection | |
| Domestic kitchen assemblies - Methods of test, Method 3: Determination of strength of shelf supports | |
| Domestic kitchen assemblies - Methods of test, Method 4: Determination of the strength of worktops and bottom surfaces | |
| Domestic kitchen assemblies - Methods of test, Method 5: Determination of strength of hinged doors | |
| Domestic kitchen assemblies - Methods of test, Method 6: Determination of slam open of hinged doors | |
| Domestic kitchen assemblies - Methods of test, Method 7: Determination of slam shut of hinged doors | |
| Domestic kitchen assemblies - Methods of test, Method 8: Determination of wear and fatigue of hinged doors | |
| Domestic kitchen assemblies - Methods of test, Method 9: Determination of resistance to downward static load on drawers and other runner-supported items | |
| Domestic kitchen assemblies - Methods of test, Part 0: Introduction, list of methods and general requirements | |
| Domestic kitchen assemblies, Part 1: Kitchen units | |
| Domestic kitchen assemblies, Part 2: Installation | |
| Double-capped fluorescent lamps - Performance specifications, Part 1: General (IEC 60081:2000, MOD) | |
| Double-capped fluorescent lamps - Performance specifications, Part 2: Minimum Energy Performance Standard (MEPS) | |
| Double-capped fluorescent lamps - Performance specifications, Part 3: Procedure for quantitative analysis of mercury present in fluorescent lamps | |
| Electric water heaters, Part 1: Energy consumption, performance and general requirements | |
| Electric water heaters, Part 2: Minimum Energy Performance Standard (MEPS) requirements and energy labelling | |
| Electrical apparatus for detection of oxygen and other gases and vapours at toxic levels - General requirements and test methods | |
| Electrical hazards on metallic pipelines | |
| Electrical wiring in furniture | |
| Electrical, thermal and loading characteristics of rotating anode X-ray tubes for medical diagnosis | |
| Electromagnetic compatibility - Immunity requirements for household appliances, electric tools and similar apparatus | |
| Electromagnetic compatibility for radiocommunications equipment | |
| Fire hazard testing electrotechnical products, Part 2.13: Test methods - Glow-wire ignitability test on materials | |
| Fire hazard testing of electrotechnical products, Part 1.1: Guidance for assessing fire hazard of electrotechnical products - General guidance | |
| Fire hazard testing of electrotechnical products, Part 10.2: Guidance and test methods for the minimization of the effects of abnormal heat on electrotechnical products involved in fires - Method for... | |
| Fire hazard testing of electrotechnical products, Part 112: Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions | |
| Fire hazard testing of electrotechnical products, Part 2.10: Test methods - Glow-wire test methods - General | |
| Fire hazard testing of electrotechnical products, Part 2.11: Test methods - Glow-wire end-product test and guidance | |
| Fire hazard testing of electrotechnical products, Part 2.12: Test methods - Glow-wire flammability test on materials | |
| Fire hazard testing of electrotechnical products, Part 2.2: Test methods - Needle-flame test | |
| Fire hazard testing of electrotechnical products, Part 2.40: Test methods - Diffusion type and premixed flame test methods | |
| Fire hazard testing of electrotechnical products, Part 2.41: Test methods - 1 kW nominal premixed test flame and guidance | |
| Fire hazard testing of electrotechnical products, Part 4: Terminology concerning fire tests | |
| Fire hazard testing of electrotechnical products, Part 5.1: Assessment of potential corrosion damage by fire effluent - General guidance | |
| Fire hazard testing of electrotechnical products, Part 7.1: Guidance on the minimization of toxic hazards due to fires involving electrotechnical products - General | |
| Fire hazard testing of electrotechnical products, Part 707: Methods of test for the determination of the flammability of solid electrical insulating materials when exposed to an igniting source | |
| Fire hazard testing of electrotechnical products, Part 829: Methods of test for the determination of the ignitability of solid electrical insulating materials when exposed to electrically heated wire sources | |
| Flickermeter - Evaluation of flicker severity | |
| Flickermeter - Functional and design specifications | |
| Furniture - Fixed height chairs, Part 1: Ergonomic and general requirements | |
| Furniture - Fixed height chairs, Part 2: Determination of strength and durability | |
| Furniture - Fixed height chairs, Part 3: Determination of stability - Upright chairs | |
| Furniture - Fixed height chairs, Part 4: Determination of stability - Chairs with tilting or reclining mechanisms when fully reclined, and rocking chairs | |
| Furniture - School and educational, Part 1: Tables - Strength, durability and stability | |
| Furniture - School and educational, Part 2: Chairs - Strength, durability and stability | |
| Furniture - School and educational, Part 3: Tables and storage furniture - Strength, durability and stability | |
| Furniture - Storage units - Determination of strength and durability | |
| Gas distribution networks, Part 1: Network management | |
| Gas distribution networks, Part 2: Steel pipe systems | |
| Gas distribution networks, Part 3: Plastics pipe systems | |
| Gas fired water heaters for hot water supply and/or central heating, Part 2: Minimum energy performance standards for gas water heaters | |
| Geographic information - Australian and New Zealand land use codes | |
| Geographic information - Rural addressing | |
| Geographic information - Rural and urban addressing | |
| Ghost-cancelling reference signal for Australian and New Zealand PAL television broadcasting systems | |
| Global maritime distress and safety system (GMDSS), Part 1: Radar transponder - Marine search and rescue (SART) - Operational and performance requirements, methods of testing and required test results | |
| Glossary of terms used in the glass and glazing industry | |
| Graphic symbols for use on medical electrical equipment | |
| Grid connection of energy systems via inverters, Part 1: Installation requirements | |
| Grid connection of energy systems via inverters, Part 2: Inverter requirements | |
| Guard and patrol security services | |
| Guide to determining the equivalence of food microbiology test methods, Part 1: Qualitative tests | |
| Guide to determining the equivalence of food microbiology test methods, Part 2: Quantitative tests | |
| Guide to determining the equivalence of food microbiology test methods, Part 3: Confirmation tests | |
| Guide to determining the equivalence of food microbiology test methods, Part 4: Antibiotic tests | |
| Guide to hazardous paint management, Part 1: Lead and other hazardous metallic pigments in industrial applications | |
| Guide to hazardous paint management, Part 2: Lead paint in residential, public and commercial buildings | |
| Guide to long-life coatings for concrete and masonry, Part 1: Wall coatings - Latex extensible | |
| Guide to long-life coatings for concrete and masonry, Part 2: Latex finish coatings - High-build, low profile | |
| Guide to long-life coatings for concrete and masonry, Part 3: Latex - Textured coatings - Non-aggregate | |
| Guide to long-life coatings for concrete and masonry, Part 4: Latex - Textured coatings - Aggregate-filled | |
| Guide to long-life coatings for concrete and masonry, Part 5: Guidelines to methods of test | |
| Guide to the development of application software, Part 1: Software user documentation | |
| Guide to the development of application software, Part 2: On-screen documentation | |
| Guide to the installation in vehicles of mobile communication equipment intended for connection to a cellular mobile telecommunication service (CMTS) | |
| Guide to the reprocessing of reusable containers for the collection of sharp items used in human and animal clinical/medical applications | |
| Guidelines for safe working on new lift installations in new constructions | |
| Guidelines for scaffolding | |
| Handling and destruction of drugs | |
| Heat-treated steel tapping screws - Mechanical properties | |
| Height adjustable swivel chairs | |
| Hexagon flange head tapping screws | |
| Hexagon head tapping screws | |
| Hexagon washer head tapping screws | |
| High visibility safety garments, Part 1: Garments for high risk applications | |
| High visibility safety garments, Part 2: Garments for fire service personnel | |
| High visibility safety garments | |
| High-density polyethylene (PE-HD) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings - Specifications | |
| Hot-dip galvanized (zinc) coatings on fabricated ferrous articles | |
| Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized process | |
| Hot-dip galvanized (zinc) coatings on ferrous open sections, applied by an in-line process | |
| Household refrigerating appliances - Energy labelling and minimum energy performance standards requirements | |
| Implementation of Health Level Seven (HL7) Version 2.3, Part 3: Electronic messages for exchange of information on drug prescription | |
| Implementation of Health Level Seven (HL7) Version 2.4, Part 1: Patient administration | |
| Implementation of Health Level Seven (HL7) Version 2.4, Part 3: Electronic messages for exchange of information on drug prescription | |
| Industrial rope access systems, Part 1: Specifications | |
| Industrial rope access systems, Part 2: Selection, use and maintenance | |
| Infants' rocking cradles - Safety requirements | |
| Information and documentation - Bibliographic data element directory, Part 1: Interloan applications | |
| Information and documentation - Bibliographic data element directory, Part 2: Acquisitions applications | |
| Information and documentation - Bibliographic data element directory, Part 3: Information retrieval applications | |
| Information and documentation - Bibliographic data element directory, Part 4: Circulation applications | |
| Information and documentation - Bibliographic data element directory, Part 5: Data elements for the exchange of cataloguing and metadata | |
| Information and documentation - Electronic manuscript preparation and markup | |
| Information and documentation - Information retrieval service and protocol | |
| Information processing systems - Local area networks, Part 1: Overview of local area network standards - LAN/MAN management (Supplement to AS/NZS 4802.1:1996) | |
| Information processing systems - Local area networks, Part 1: Overview of local area network Standards - Media access control bridges (Supplement to AS/NZS 4802.1:1996) | |
| Information processing systems - Local area networks, Part 1: Overview of local area network standards - System load protocol (Supplement to AS/NZS 4802.1:1996) | |
| Information processing systems - Local area networks, Part 1: Overview of local area network standards | |
| Information processing systems - Local area networks, Part 2: Logical link control | |
| Information processing systems - Local area networks, Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications | |
| Information processing systems - Local area networks, Part 6: Distributed queue dual bus access method and physical layer specifications | |
| Information processing systems - Local area networks, Part 7: Slotted ring access method and physical layer specification | |
| Information security management, Part 1: Code of practice for information security management | |
| Information security management, Part 2: Specification for information security management systems (Redesignated as AS/NZS 7799.2:2000 on 15 August 2001) | |
| Information security management, Part 2: Specification for information security management systems | |
| Information security management | |
| Information technology - Coded representation of picture and audio information - Progressive bi-level image compression | |
| Information technology - Digital compression and coding of continuous-tone still images, Part 1: Requirements and guidelines | |
| Information technology - Keyboard layouts for text and office systems, Part 1: General principles governing keyboard layouts | |
| Information technology - Keyboard layouts for text and office systems, Part 2: Alphanumeric section | |
| Information technology - Keyboard layouts for text and office systems, Part 3: Complementary layouts of the alphanumeric zone of the alphanumeric section | |
| Information technology - Keyboard layouts for text and office systems, Part 4: Numeric section | |
| Information technology - Keyboard layouts for text and office systems, Part 5: Editing section | |
| Information technology - Keyboard layouts for text and office systems, Part 6: Function section | |
| Information technology - Keyboard layouts for text and office systems, Part 7: Symbols used to represent functions | |
| Information technology - Keyboard layouts for text and office systems, Part 8: Allocation of letters to the keys of a numeric keypad | |
| Information technology - Local area networks, Part 12: Demand-priority access method, physical layer and repeater specifications | |
| Information technology - Open Systems Interconnection - Network layer security protocol | |
| Information technology - Open Systems Interconnection - Remote database access, Part 1: Generic model, service and protocol | |
| Information technology - Open Systems Interconnection - Remote database access, Part 2: SQL specialization | |
| Information technology - Software packages - Quality requirements and testing | |
| Information technology - Telecommunications and information exchange between systems - Private integrated services network - Inter-exchange signalling protocol - Call completion supplementary services | |
| Information technology - Telecommunications and information exchange between systems - Private integrated services network - Inter-exchange signalling protocol - Call diversion supplementary services | |
| Information technology - Telecommunications and information exchange between systems - Private integrated services network - Inter-exchange signalling protocol - Call transfer supplementary service | |
| Information technology - Telecommunications and information exchange between systems - Private integrated services network - Inter-exchange signalling protocol - Name identification supplementary services | |
| Information technology - Telecommunications and information exchange between systems - Private integrated services network - Inter-exchange signalling protocol - Path replacement additional network feature | |
| Information technology - Telecommunications and information exchange between systems - Private integrated services network - Specification, functional model and information flows - Call completion supplementary services | |
| Information technology - Telecommunications and information exchange between systems - Private integrated services network - Specification, functional model and information flows - Call diversion supplementary services | |
| Information technology - Telecommunications and information exchange between systems - Private integrated services network - Specification, functional model and information flows - Call transfer supplementary service | |
| Information technology - Telecommunications and information exchange between systems - Private integrated services network - Specification, functional model and information flows - Identification supplementary services | |
| Information technology - Telecommunications and information exchange between systems - Private integrated services network - Specification, functional model and information flows - Name identification supplementary services | |
| Information technology - Telecommunications and information exchange between systems - Private integrated services network - Specification, functional model and information flows - Path replacement additional network feature | |
| Installation of security window grilles | |
| Insulating glass units | |
| Insulators - Composite for overhead power lines - Voltages greater than 1000 V a.c., Part 2: Standard strength classes and end fittings for string insulator units | |
| International lamp coding system (ILCOS) | |
| Isolated electrical supply systems for medical use | |
| Latex barrier membranes (dams) for prophylactic use in sexual activity | |
| Life cycle costing - An application guide | |
| Limits and methods of measurement of radio disturbance characteristics for the protection of receivers used on board vehicles | |
| Liquid-chilling packages using the vapour compression cycle, Part 1.1: Method of rating and testing for performance - Rating | |
| Liquid-chilling packages using the vapour compression cycle, Part 1.2: Method of rating and testing for performance - Testing | |
| Liquid-chilling packages using the vapour compression cycle, Part 2: Minimum energy performance standard (MEPS) and compliance requirements | |
| Low styrene emission resins, Part 1: Determination of styrene evaporation from unsaturated polyester and vinyl ester resins | |
| Low styrene emission resins, Part 2: The assessment of degree of interlaminar adhesion in unsaturated polyester and vinyl ester resin - Glass fibre laminates | |
| Management system integration - Guidance to business, government and community organizations | |
| Marking of electrical products to indicate compliance with regulations, Part 1: General rules for use of the mark | |
| Marking of electrical products to indicate compliance with regulations, Part 2: Specific requirements for electrical safety regulatory applications | |
| Marking of electrical products to indicate compliance with regulations, Part 3: Specific requirements for electromagnetic compatibility regulatory applications | |
| Marking of electrical products to indicate compliance with regulations, Part 4: Specific requirements for radio apparatus regulatory requirements | |
| Masonry units and segmental pavers - Methods of test, Method 10: Determining resistance to salt attack | |
| Masonry units and segmental pavers - Methods of test, Method 11: Determining coefficients of expansion | |
| Masonry units and segmental pavers - Methods of test, Method 12: Determining coefficients of contraction | |
| Masonry units and segmental pavers - Methods of test, Method 13: Determining pitting due to lime particles | |
| Masonry units and segmental pavers - Methods of test, Method 14: Determining water absorption properties | |
| Masonry units and segmental pavers - Methods of test, Method 15: Determining lateral modulus of rupture | |
| Masonry units and segmental pavers - Methods of test, Method 16: Determining permeability to water | |
| Masonry units and segmental pavers - Methods of test, Method 17: Determining initial rate of absorption (suction) | |
| Masonry units and segmental pavers - Methods of test, Method 18: Determining tensile strength of masonry units and segmental pavers | |
| Masonry units and segmental pavers - Methods of test, Method 1: Sampling for compliance testing | |
| Masonry units and segmental pavers - Methods of test, Method 2: Assessment of mean and standard deviation | |
| Masonry units and segmental pavers - Methods of test, Method 3: Determining dimensions | |
| Masonry units and segmental pavers - Methods of test, Method 4: Determining compressive strength of masonry units | |
| Masonry units and segmental pavers - Methods of test, Method 5: Determining breaking load of segmental paving units | |
| Masonry units and segmental pavers - Methods of test, Method 6: Determining potential to effloresce | |
| Masonry units and segmental pavers - Methods of test, Method 7: Determining core percentage and material thickness | |
| Masonry units and segmental pavers - Methods of test, Method 8: Determining moisture content and dry density | |
| Masonry units and segmental pavers - Methods of test, Method 9: Determining abrasion resistance | |
| Masonry units and segmental pavers - Methods of test, Part 0: General introduction and list of methods | |
| Masonry units and segmental pavers | |
| Masonry units, pavers, flags and segmental retaining wall units, Part 1: Masonry units | |
| Masonry units, pavers, flags and segmental retaining wall units, Part 2: Pavers and flags | |
| Masonry units, pavers, flags and segmental retaining wall units, Part 3: Segmental retaining wall units | |
| Masonry units, segmental pavers and flags - Methods of test, Method 19: Determination of bow | |
| Materials for the thermal insulation of buildings, Part 1: General criteria and technical provisions | |
| Mechanical properties of fasteners, Part 1: Bolts, screws and studs | |
| Mechanical properties of fasteners, Part 2: Nuts with specified proof load values - Coarse thread | |
| Mechanical properties of fasteners, Part 5: Set screws and similar threaded fasteners not under tensile stress | |
| Mechanical tapping bands for waterworks purposes | |
| Medical devices - Risk management, Part 1: Application of risk analysis | |
| Medical diagnostic X-ray equipment - Radiation conditions for use in the determination of characteristics | |
| Medical electrical equipment - Characteristics of electro optical X-ray image intensifiers, Part 1: Determination of the entrance field size | |
| Medical electrical equipment - Characteristics of electro optical X-ray image intensifiers, Part 2: Determination of the conversion factor | |
| Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers, Part 3: Determination of the luminance distribution and luminance non-uniformity | |
| Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers, Part 4: Determination of the image distortion | |
| Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers, Part 5: Determination of the detective quantum efficiency | |
| Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers, Part 6: Determination of the contrast ratio and veiling glare index | |
| Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers, Part 7: Determination of the modulation transfer function | |
| Medical electrical equipment - Digital imaging and communications in medicine (DICOM) - Radiotherapy objects | |
| Medical electrical equipment - Dosimeters with ionization chambers as used in radiotherapy | |
| Medical electrical equipment - Fundamental aspects of safety standards | |
| Medical electrical equipment - Medical electron accelerators, Part 1: Functional performance characteristics | |
| Medical electrical equipment - Medical electron accelerators, Part 2: Periodic function performance testing | |
| Medical electrical equipment - Radionuclide calibrators - Particular methods for describing performance | |
| Metal finishing - Thermoset powder coatings | |
| Metal-banded flexible couplings for low-pressure applications | |
| Metallic flanges, Part 1: Steel flanges | |
| Metallic flanges, Part 2: Cast iron flanges | |
| Metallic flanges, Part 3: Copper alloy and composite flanges | |
| Methods for evaluating clothing for protection against heat and fire, Part 1: Evaluation of thermal behaviour of materials and material assemblies when exposed to a source of radiant heat | |
| Methods for evaluating clothing for protection against heat and fire, Part 2: Evaluation of heat transmission of materials and material assemblies when exposed to flame | |
| Methods for evaluating clothing for protection against heat and fire, Part 3: Evaluation of the behaviour of materials and material assemblies when exposed to small splashes of molten metal | |
| Methods for evaluating clothing for protection against heat and fire, Part 4: Evaluation of the behaviour of materials and material assemblies when exposed to heavy splashes of molten metal | |
| Methods for evaluating clothing for protection against heat and fire, Part 5: Evaluation of the contact heat transmission through materials and material assemblies | |
| Methods of testing wool packs for greasy wool, Method 5: Strength of fabric after exposure to ultraviolet radiation | |
| Methods of testing woolpacks for greasy wool, Method 1: Fibrillation of woven, HDPE fabric | |
| Methods of testing woolpacks for greasy wool, Method 2: Adhesion of wool to anti-slip coating | |
| Methods of testing woolpacks for greasy wool, Method 3: Surface frictional properties of fabric | |
| Methods of testing woolpacks for greasy wool, Method 4: Handling resistance | |
| Methods of testing woolpacks for greasy wool, Part 0: Introduction and list of methods | |
| MF and HF radiocommunications equipment in the international maritime mobile radiotelephone service | |
| MF and HF radiocommunications equipment in the land mobile service utilizing single sideband suppressed carrier emission | |
| Micrographics - Microfilming of documents on 16 mm and 35 mm silver-gelatin type microfilm - Operating procedures | |
| Micrographics - Reader-printers for transparent microforms - Characteristics | |
| Micrographics - Readers for transparent microforms - Measurement of characteristics | |
| Micrographics - Readers for transparent microforms - Performance characteristics | |
| Modified PVC (PVC-M) pipes for pressure applications | |
| Motor vehicles - 'I' beam steer axle camber adjustment | |
| Motor vehicles - Anchorages and anchor points for securing internal cargo | |
| Natural ventilators - Classification and performance | |
| Non-destructive examination and discard criteria for wire ropes in mine winding systems | |
| Occupational health and safety management systems - General guidelines on principles, systems and supporting techniques | |
| Occupational health and safety management systems - Specification with guidance for use | |
| Occupational protective clothing, Part 1: Guidelines on the selection, use, care and maintenance of protective clothing | |
| Occupational protective clothing, Part 2: General requirements | |
| Office desks | |
| Office panel systems - Workstations | |
| Office-based health care facilities not involved in complex patient procedures and processes - Cleaning, disinfecting and sterilizing reusable medical and surgical instruments and equipment, and maintenance of the associated environment... | |
| Oriented PVC (PVC-O) pipes for pressure applications | |
| Performance of electrical lighting equipment - Ballasts for fluorescent lamps, Part 1: Method of measurement to determine energy consumption and performance of ballast-lamp circuits | |
| Performance of electrical lighting equipment - Ballasts for fluorescent lamps, Part 2: Energy labelling and minimum energy performance standards requirements | |
| Performance of external power supplies, Part 1: Test method and energy performance mark | |
| Performance of external power supplies, Part 2: Minimum energy performance standard (MEPS) requirements | |
| Performance of household electrical appliances - Refrigerating appliances, Part 1: Energy consumption and performance | |
| Performance of household electrical appliances - Refrigerating appliances, Part 2: Energy labelling and minimum energy standard requirements | |
| Performance of refrigerated beverage vending machines, Part 1: Test methods - Energy performance | |
| Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polyethylene (PE) | |
| Playground surfacing -Specifications, requirements and test method | |
| Playgrounds and playground equipment, Part 1: Development, installation, inspection, maintenance and operation | |
| Polyethylene maintenance shafts | |
| Polyethylene storage tanks for water and chemicals | |
| Portable fire extinguishers - Aerosol type | |
| Preparation of documents used in electrotechnology, Part 1: General requirements | |
| Preparation of documents used in electrotechnology, Part 2: Function-oriented diagrams | |
| Preparation of documents used in electrotechnology, Part 3: Connection diagrams, tables and lists | |
| Preparation of documents used in electrotechnology, Part 4: Location and installation documents | |
| Preparation of function charts for control systems | |
| Pressure equipment - Competencies of inspectors | |
| Procedure for specimen collection and the detection and quantification of drugs in oral fluid | |
| Procedures for the collection, detection and quantitation of drugs of abuse in urine | |
| Protective clothing - Protection against liquid chemicals - Test method, Part 1: Resistance of materials to permeation by liquids | |
| Protective clothing - Protection against liquid chemicals, Part 2: Test method: Determination of resistance to penetration by a jet of liquid (Jet test) | |
| Protective clothing - Protection against liquid chemicals, Part 3: Test method: Determination of resistance to penetration by spray (Spray Test) | |
| Protective clothing for firefighters - Requirements and test methods for protective clothing used for wildland firefighting (ISO 15384:2003, MOD) | |
| Protective clothing for users of hand-held chainsaws, Part 1: Test rig for testing resistance to cutting by a chainsaw | |
| Protective clothing for users of hand-held chainsaws, Part 2: Test methods for leg protectors | |
| Protective clothing for users of hand-held chainsaws, Part 3: Protective legwear | |
| Protective devices against diagnostic medical X-radiation, Part 1: Determination of attenuation properties of materials | |
| Protective devices against diagnostic medical X-radiation, Part 2: Protective glass plates | |
| Protective devices against diagnostic medical X-radiation, Part 3: Protective clothing and protective devices for gonads | |
| Protective footwear for fire fighters - Requirements and test methods | |
| Protective footwear for firefighters - Requirements and test methods (EN 15090:2012, MOD) (Ruling 1 to AS/NZS 4821:2014) | |
| Protective footwear for firefighters - Requirements and test methods | |
| Protective headgear for cricket, Part 1: Helmets | |
| Protective headgear for cricket, Part 2: Temple protectors | |
| Protective headgear for cricket, Part 3: Faceguards | |
| Pyrogen fire extinguishing aerosol systems | |
| Quality requirements for cut-to-size and processed glass | |
| Radar transponders for marine search and rescue (SART) - Operational and performance requirements and methods of test | |
| Radiocommunications equipment used in the handphone and citizen band radio services operating at frequencies not exceeding 30 MHz | |
| Radiocommunications equipment used in the paging service, Part 1: Angle modulated equipment | |
| Radiocommunications equipment used in the paging service, Part 2: Amplitude modulated equipment | |
| Radiocommunications equipment used in the UHF citizen band and personal radio service | |
| Radiocommunications requirements for cordless telephones operating in the 1.7 MHz and between 30 and 41 MHz frequency bands | |
| Radionuclide imaging devices - Characteristics and test conditions, Part 1: Positron emission tomographs | |
| Radionuclide imaging devices - Characteristics and test conditions, Part 2: Single photon emission computed tomographs | |
| Radionuclide imaging devices - Characteristics and test conditions, Part 3: Gamma camera based wholebody imaging systems | |
| Radiotelephone transmitters and receivers for the maritime mobile service operating in the VHF bands - Technical characteristics and methods of measurement, Part 1: Shipborne equipment and limited coast stations (including... | |
| Radiotelephone transmitters and receivers for the maritime mobile service operating in the VHF bands - Technical characteristics and methods of measurement, Part 2: Major coast stations, limited coast stations, ship... | |
| Radiotelephone transmitters and receivers for the maritime mobile service operating in the VHF bands - Technical characteristics and methods of measurement | |
| Radiotherapy equipment - Coordinates, movements and scales | |
| Recommended practice for the colour coding of steel products | |
| Requirements for domestic electrical appliances and equipment for reconditioning or parts recycling | |
| Restraint of children with disabilities in motor vehicles | |
| Restraint systems for motor vehicles - Performance tests, Method 1: Determination of webbing durability in adjustment duty | |
| Restraint systems for motor vehicles - Performance tests, Method 2: Determination of webbing durability in withdrawing and retracting duty through a sash guide | |
| Restraint systems for motor vehicles - Performance tests, Method 3: Determination of fatigue resistance of a flexible member | |
| Restraint systems for motor vehicles - Performance tests, Method 4: Determination of adjustment device forces | |
| Restraint systems for motor vehicles - Performance tests, Method 5: Determination of locking angle of a tilt-lock adjustment device | |
| Restraint systems for motor vehicles - Performance tests, Method 6: Determination of free-end device strength | |
| Restraint systems for motor vehicles - Performance tests, Part 0: Introduction and list of methods | |
| Risk management | |
| Safe working on low-voltage electrical installations | |
| Safety mesh | |
| Safety of Portable Inverters | |
| Security screen doors - Methods of test, Method 1: Dynamic impact test | |
| Security screen doors and security window grilles - Methods of test, Method 2: Knife shear test | |
| Security window grilles | |
| Self ballasted lamps for general lighting services, Part 2: Minimum Energy Performance Standards (MEPS) requirements | |
| Self-ballasted lamps for general lighting services, Part 1: Test methods - Energy performance | |
| Self-ballasted lamps for general lighting services, Part 2: Minimum Energy Performance Standards (MEPS) requirements | |
| Selfballasted lamps for general lighting services, Part 1: Test methods - Energy performance | |
| Single-service cloth towels | |
| Slip resistance classification of new pedestrian surface materials | |
| Slip resistance measurement of existing pedestrian surfaces | |
| Slotted countersunk (flat) head tapping screws (common head style) | |
| Slotted pan head tapping screws | |
| Slotted raised countersunk (oval) head tapping screws (common head style) | |
| Solar heating - Domestic water heating systems, Part 1: Performance rating procedure using indoor test methods | |
| Solderless crimped connections - General requirements, test methods and practical guidance | |
| Specification for water disinfection tablets - Iodine releasing | |
| Specification for woven woolpacks for greasy wool | |
| Stand alone retail display devices (retail spinners) | |
| Stand-alone power systems, Part 1: Safety and installation | |
| Stand-alone power systems, Part 2: System design | |
| Stationary source emissions, Method 4: Area source sampling - Flux chamber technique | |
| Stationary source emissions, Part 3: Determination of odour concentration by dynamic olfactometry | |
| Steel prestressing materials, Part 2: Testing requirements | |
| Steel reinforcing materials | |
| Steel utility services poles | |
| Structural design requirements for utility services poles | |
| Structural laminated veneer lumber (LVL), Part 2: Determination of structural properties - Test methods | |
| Structural laminated veneer lumber (LVL), Part 3: Determination of structural properties - Evaluation methods | |
| Structural laminated veneer lumber, Part 0: Specifications | |
| Structural laminated veneer lumber, Part 1: Method of test for measurement of dimensions and shape | |
| Structural laminated veneer lumber, Part 4: Determination of formaldehyde emissions | |
| Structural Laminated Veneer Lumber | |
| Sun protective clothing - Evaluation and classification | |
| Sustainable forest management - Requirements | |
| Tapping screws thread | |
| Technical characteristics and test conditions for data transmission equipment operating in the 900 MHz, 2.4 GHz and 5.8 GHz bands and using spread spectrum modulation techniques | |
| Testing of building facades | |
| Tests for coating resistance to cathodic disbonding | |
| Text telecommunications - User interface requirements - For Deaf people and people with hearing and speech disabilities | |
| The storage and handling of Class 9 (miscellaneous) dangerous goods and articles | |
| The storage and handling of toxic substances | |
| Thermal insulation materials for buildings, Part 2: Design | |
| Timber - Assessment of drying quality | |
| Timber - Bond performance of structural adhesives | |
| Timber - Glossary of terms in timber-related Standards | |
| Timber - Stress-graded - Procedures for monitoring structural properties | |
| Ultrasonic power measurement in liquids in the frequency range 0.5 MHz to 25 MHz | |
| Ultrasonics - Hand-held probe Doppler foetal heartbeat detectors - Performance requirements and methods of measurement and reporting | |
| Ultrasonics - Physiotherapy systems - Performance requirements and methods of measurement in the frequency range 0.5 MHz to 5 MHz (IEC 61689:1996, MOD) | |
| Ultrasonics - Pressure pulse lithotripters - Characteristics of fields | |
| Ultrasonics - Surgical systems - Measurement and declaration of the basic output characteristics | |
| Upholstery cleaning, Part 1: Fabric upholstery | |
| User-applied labels for use on syringes containing drugs used during anaesthesia | |
| Vehicle immobilizers | |
| Water supply - Domestic type water treatment appliances - Performance requirements | |
| Welding consumables - Covered electrodes for manual metal arc welding of creep-resisting steels - Classification | |
| Welding consumables - Covered electrodes for manual metal arc welding of high-strength steels - Classification | |
| Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification | |
| Welding consumables\x97Cover ed electrodes for manual metal arc welding of stainless and heat-resisting steels\x97Classifica tion | |
| Wet area membranes | |
| Windows, external glazed, timber and composite doors, Part 1: Test sequence, sampling and test methods | |
| Wool - Fleece testing and measurement, Method 1: Weighing and sampling greasy wool for fleece testing and measurement | |
| Wool - Fleece testing and measurement, Method 2: Determination of washing yield and clean fleece weight | |
| Wool - Fleece testing and measurement, Method 3: Measurement of mean fibre diameter using Airflow and Sonic A instruments | |
| Wool - Fleece testing and measurement, Method 4: Measurement of mean fibre diameter and determination of fibre diameter distribution using the SIROLAN-LASERSCAN measuring system | |
| Wool - Fleece testing and measurement, Method 5: Measurement of mean fibre diameter using the OFDA measuring system | |
| Wool - Fleece testing and measurement, Method 6: Measurement of mean fibre diameter using the FDA 200 measuring system | |
| Wool - Fleece testing and measurement, Part 0: Introduction and list of methods | |
| Wool - IWTO Core Test Regulations | |
| Wool - Measurement of fibre properties, Part 1: Measurement of the fibre length after carding of scoured or carbonised wool | |
| Wool - Measurement of fibre properties, Part 2: Measurement of the fibre length after carding waste of scoured or carbonised wool | |
| Wool-Fleece testing and measurement, Method 1: Weighing and sampling greasy wool for fleece testing and measurement | |
| Wool-Fleece testing and measurement, Method 2: Determination of washing yield and clean fleece weight | |
| Wool-Fleece testing and measurement, Method 3: Measurement of mean fibre diameter using Airflow and Sonic A instruments | |
| Wool-Fleece testing and measurement, Method 4: Measurement of mean fibre diameter and determination of fibre diameter distribution using the SIROLAN-LASERSCAN measuring system | |
| Wool-Fleece testing and measurement, Method 5: Measurement of mean fibre diameter using the OFDA measuring system | |
| Wool-Fleece testing and measurement, Part 0: Introduction and list of methods | |
| Work in compressed air and hyperbaric facilities, Part 2: Hyperbaric Oxygen facilities | |
| Zinc and zinc/aluminium-alloy coatings on steel wire |
| << Prev | Next >> |