Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
1000
1200
1250
1300
1350
1400
1450
1500
1510
1520
1530
1540
1550
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1570
1580
1590
1600
1610
1620
| Product Name | Notes |
|---|---|
| Adjustable speed electrical power drive systems -- Part 5-1: Safety requirements - Electrical, thermal and energy (Endorsed by AENOR in July of 2003.) | |
| ALUMINIUM AND ALUMINIUM ALLOYS. FINSTOCK. PART 2: MECHANICAL PROPERTIES. | |
| Analytical expression for daily solar profiles | |
| Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz) | |
| Assessment of lighting equipment related to human exposure to electromagnetic fields | |
| Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz) | |
| Audio/video, information and communication technology equipment - Part 1: Safety requirements (Endorsed by AENOR in September of 2014.) | |
| Automatic forced draught burners for gaseous fuels | |
| Automation systems in the process industry - Factory acceptance test (FAT), site acceptance test (SAT) and site integration test (SIT) (Endorsed by AENOR in June of 2012.) | |
| Balance-of-system components for photovoltaic systems - Design qualification natural environments (IEC 62093:2005) | |
| Battery charge controllers for photovoltaic systems - Performance and functioning | |
| Bushings for d.c. application | |
| Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method. | |
| Cable cleats for electrical installations | |
| Cable glands for electrical installations | |
| Cable management systems - Cable ties for electrical installations | |
| Calibration of fibre optic chromatic dispersion test sets. (Endorsed by AENOR in October of 2001.) | |
| Cement-bonded particleboards - Definition and classification | |
| Cement-bonded particleboards - Specification - Part 1: General requirements | |
| Cement-bonded particleboards - Specifications - Part 2: Requirements for OPC bonded particleboards for use in dry, humid and external conditions | |
| Commissioning of electrical, instrumentation and control systems in the process industry - Specific phases and milestones (Endorsed by AENOR in June of 2012.) | |
| Common requirements for concrete pressure pipes including joints and fittings | |
| Communication network dependability engineering (Endorsed by AENOR in May of 2010.) | |
| Communication networks and systems for power utility automation - Part 10: Conformance testing (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in October of 2025.) | |
| Communication networks and systems for power utility automation - Part 6: Configuration description language for communication in power utility automation systems related to IEDs (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n... | |
| Communication networks and systems in substations - Part 10: Conformance testing (Endorsed by AENOR in September of 2005.) | |
| Communication networks and systems in substations -- Part 6: Configuration description language for communication in electrical substations related to IEDs (Endorsed by AENOR in September of 2004.) | |
| Composite Hollow Core Station Post Insulators for substations with a.c. voltage greater than 1000 V and d.c. voltage greater than 1500V- Definitions, test methods and acceptance criteria | |
| Composite station post insulators for substations with a.c. voltages greater than 1 000 V up to 245 kV - Definitions, test methods and acceptance criteria (IEC 62231:2006). | |
| Composite station post insulators for substations with ac voltages greater than 1 000 V UP TO 245 kV - Part 1: Dimensional, mechanical and electrical characteristics | |
| Concentrator photovoltaic (CPV) modules - Thermal cycling test to differentiate increased thermal fatigue durability | |
| Concentrator photovoltaic (CPV) modules and assemblies - Design qualification and type approval | |
| Concentric lay stranded overhead electrical conductors containing one or more gap(s) | |
| Connectors for DC-application in photovoltaic systems - Safety requirements and tests | |
| Consumer audio/video equipment - Digital interface -- Part 1: General (Endorsed by AENOR in July of 2003.) | |
| Consumer audio/video equipment - Digital interface -- Part 6: Audio and music data transmission protocol (Endorsed by AENOR in April of 2003.) | |
| Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors | |
| Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers | |
| Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials | |
| Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures (Endorsed by AENOR in August of 2006.) | |
| Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 3: Plain base plates and spigot pins - Requirements and test procedures | |
| DEGREES OF PROTECTION PROVIDED BY ENCLOSURES FOR ELECTRICAL EQUIPMENT AGAINST EXTERNAL MECHANICAL IMPACTS (IK CODE). | |
| Determination of the compressive strength of autoclaved aerated concrete | |
| Determination of the dry density of autoclaved aerated concrete | |
| Determination of the drying shrinkage of autoclaved aerated concrete (Endorsed by AENOR in August of 2006.) | |
| Devices for the connection of luminaires for household and similar purposes - Part 1: General requirements | |
| Devices for the connection of luminaires for household and similar purposes - Part 2: Standard sheets for DCL | |
| Devices for the connection of luminaires for household and similar purposes -- Part 1: General requirements | |
| Dielectric and resistive properties of solid insulating materials - Part 3-1: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - General method (Endorsed by AENOR in... | |
| Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC Methods) - Surface resistance and surface resistivity (Endorsed by AENOR in April of 2016.)... | |
| Digital addressable lighting interface - Part 302: Particular requirements - Input devices - Absolute input devices (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in July of 2024.) | |
| Digital addressable lighting interface - Part 302: Particular requirements - Input devices - Absolute input devices (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in October of 2017.) | |
| Digital addressable lighting interface - Part 303: Particular requirements - Input devices - Occupancy sensor (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in July of 2024.) | |
| Digital addressable lighting interface - Part 303: Particular requirements - Input devices - Occupancy sensor (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in October of 2017.) | |
| Digital addressable lighting interface - Part 304: Particular requirements - Input devices - Light sensor (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in July of 2024.) | |
| Digital addressable lighting interface - Part 304: Particular requirements - Input devices - Light sensor (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in October of 2017.) | |
| Digital audio - Digital input-output interfacing - Transmission of digital audio over asynchronous transfer mode (ATM) networks (Endorsed by AENOR in December of 2005.) | |
| Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 (Endorsed by AENOR in December of 2001.) | |
| Digital data communication for measurement and control -- Part 2: Additional profiles for ISO/IEC 8802-3 based communication networks in real-time applications (Endorsed by AENOR in October of 2008.) | |
| Digital data communications for measurement and control -- Part 1: Profile sets for continuous and discrete manufacturing relative to fieldbus use in industrial control systems (Endorsed by AENOR in October... | |
| Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 3: Link protection | |
| Digital Radio Mondiale (DRM) -- Part 1: System specification (Endorsed by AENOR in April of 2004.) | |
| Discharge lamps (excluding fluorescent lamps) - Safety specifications | |
| Durability of wood and wood-based products - Accelerated ageing of treated wood prior to biological testing - Evaporative ageing procedure | |
| Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - 4: Cast polyurethane sealing elements | |
| Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber | |
| Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers | |
| Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 3: Cellular materials of vulcanized rubber | |
| Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber. | |
| Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber | |
| Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers. | |
| Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 3: Cellular materials of vulcanized rubber | |
| Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 4: Cast polyurethane sealing elements. | |
| Elastomeric Seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids. | |
| Elastomeric seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids | |
| Elastomeric seals- Material requirements for joint seals in water and drainage applications- Part 3: Cellular materials of vulcanized rubber. | |
| Elastomeric seals- Material requirements for pipe joint seals used in water and drainage applications- Part 4: Cast polyurethane sealing elements. | |
| Elastomeric seals- Material requrements for pipe joint seals used in water and drainage applications-Part 2: Thermoplastic elastomers. | |
| Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets (IEC 61770:1998/A2:2006) | |
| Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets. | |
| Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets | |
| Electric cables - Spark-test method (IEC 62230:2006). | |
| Electric cables - Spark-test method | |
| Electric components - Reliability - Reference conditions for failure rates and stress models for conversion (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in December of 2019.) | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: general requirements (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in June of 2022.) | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in June of 2025.) | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws (Endorsed by AENOR in May of 2016.) | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in July... | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-14: Particular requirements for hand-held planers | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-2: Particular requirements for hand-held screwdrivers and impact wrenches | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type (IEC 62841-2-4:2014, modified)... | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-5: Particular requirements for hand-held circular saws (IEC 62841-2-5:2014, modified) | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-9: Particular requirements for hand-held tappers and threaders | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in August... | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines | |
| Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 3-6: Particular requirements for diamond drills with liquid system | |
| Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system (IEC 62841-3-6:2014, modified) | |
| Electric toys - Safety (IEC 62115:2003 + A1:2004, modified) | |
| Electric toys - Safety | |
| Electric vehicle conductive charging system - Part 1: General requirements | |
| Electric vehicle conductive charging system - Part 21-1: Electric vehicle on-board charger EMC requirements for conductive connection to an AC/DC supply (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in December of... | |
| Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection to an a.c/d.c. supply | |
| Electric vehicle conductive charging system - Part 23: DC electric vehicle charging station | |
| Electric vehicle conductive charging system - Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging | |
| Electrical installations for lighting and beaconing of aerodromes - Maintenance of aeronautical ground lighting constant current series circuits (IEC 61821:2002). (Endorsed by AENOR in March of 2008.) | |
| Electrical installations for lighting and beaconing of aerodromes - Safety secondary circuits in series circuits - General safety requirements | |
| Electrical insulation systems - Electrical stresses produced by repetitive impulses - Part 1: General method of evaluation of electrical endurance | |
| Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 1: Wire-wound winding EIS (Endorsed by AENOR in June of 2014.) | |
| Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 1: Wire-wound winding EIS (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in June of... | |
| Electrical insulation systems - Thermal evaluation of modifications to an established wire-wound EIS | |
| Electricity metering (a.c.) - Tariff and load control - Part 11: Particular requirements for electronic ripple control receivers | |
| Electricity metering (a.c.) - Tariff and load control -- Part 21: Particular requirements for time switches | |
| Electricity metering (AC) - Tariff and load control - Part 21: Particular requirements for time switches | |
| Electricity metering - Data exchange for meter reading, tariff and load control - Part 31: Use of local area networks on twisted pair with carrier signalling | |
| Electricity metering - Data exchange for meter reading, tariff and load control - Part 53: COSEM application layer | |
| Electricity metering - Data exchange for meter reading, tariff and load control - Part 61: Object identification system (OBIS) | |
| Electricity metering - Data exchange for meter reading, tariff and load control -- Part 62: Interface classes. (Endorsed by AENOR in December of 2002.) | |
| Electricity metering data exchange - The DLMS/COSEM suite - Part 1-0: Smart metering standardization framework | |
| Electricity metering equipment (a.c.) - General requirements, tests and test conditions -- Part 21: Tariff and load control equipment (IEC 62052-21:2004) | |
| Electricity metering equipment (a.c.) - Particular requirements - Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2) | |
| Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters for active energy (classes 1 and 2) | |
| Electricity metering equipment (a.c.) - Particular requirements - Part 22: Static meters for active energy (classes 0,2 S and 0,5 S) | |
| Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3) | |
| Electricity metering equipment (a.c.) - Particular requirements - Part 24: Static meters for reactive energy at fundamental frequency (classes 0,5 S, 1 S and 1) | |
| Electricity metering equipment (a.c.) - Particular requirements -- Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2) | |
| Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment | |
| Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 21: Tariff and load control equipment | |
| Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safety requirements and tests (Endorsed by AENOR in September of 2016.) | |
| Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 1: Methods of measuring and specifying the performance of system components (Endorsed by AENOR in March of 2015.) | |
| Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 1: Methods of measuring and specifying the performance of system components (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in April... | |
| Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 2: Methods of calculating and measuring the low-frequency magnetic field emissions from the loop for assessing conformity with guidelines... | |
| Electroacoustics - Audio-frequency induction loop systems for assisted hearing -- Part 1: Methods of measuring and specifying the performance of system components | |
| Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in August of 2017.) | |
| Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests | |
| Electroacoustics - Sound level meters - Part 3: Periodic tests | |
| Electromechanical elementary relays - Part 1: General requirements | |
| ELECTROMECHANICAL NON-SPECIFIED TIME ALL-OR-NOTHING ELECTRICAL RELAYS. PART 1: GENERAL REQUIREMENTS. | |
| Electromechanical non-specified time all-or-nothing relays of assessed quality - Part 1: Generic specification | |
| ELECTRONIC COMPONENTS - RELIABILITY - REFERENCE CONDITIONS FOR FAILURE RATES AND STRESS MODELS FOR CONVERSION. | |
| Electronic railway equipment - On board driving data recording system - Part 1: System specification | |
| Electronic railway equipment - On board driving data recording system - Part 2: Conformity testing | |
| Electronic railway equipment - On-board multimedia and telematic subsystems for railways - Part 1: General architecture | |
| Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements | |
| End-suction centrifugal pumps, rating with 10 bar with bearing bracket - Nominal duty point, main dimensions, designation system | |
| Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the... | |
| Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of the controlgear | |
| Energy performance of lamp controlgear - Part 3: Controlgear for halogen lamps and LED modules - Method of measurement to determine the efficiency of the controlgear | |
| Equipment reliability - Reliability assessment methods (IEC 62308:2006). (Endorsed by AENOR in May of 2007.) | |
| Fibre optic active components and devices - Package and interface standards - Part 2: SFF 10-pin transceivers (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in February of 2025.) | |
| Fibre optic active components and devices - Package and interface standards -- Part 11: 14-pin modulator-integrated laser diode transmitters (Endorsed by AENOR in March of 2004.) | |
| Fibre optic active components and devices - Package and interface standards -- Part 2: SFF MT-RJ 10-pin transceivers. (Endorsed by AENOR in August of 2003.) | |
| Fibre optic active components and devices - Performance standards -- Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application (Endorsed by AENOR in September of 2003.) | |
| Fibre optic circulators -- Part 1: Generic specification. (Endorsed by AENOR in October of 2001.) | |
| Fibre optic connector interfaces -- Part 10: Type Mini-MPO connector family. (Endorsed by AENOR in November of 2001.) | |
| Fibre optic connector interfaces -- Part 15: Type LSH connector family (Endorsed by AENOR in December of 2001.) | |
| Fibre optic connector interfaces -- Part 20: Type LC connector family (Endorsed by AENOR in February of 2003.) | |
| Fibre optic connector interfaces -- Part 5: Type MT connector family (Endorsed by AENOR in May of 2002.) | |
| Fibre optic connector interfaces -- Part 7: Type MPO connector family (Endorsed by AENOR in May of 2002.) | |
| FIBRE OPTIC CONNECTOR INTERFACES. PART 13: TYPE FC-PC CONNECTOR FAMILY (Endorsed by AENOR in November of 1999.) | |
| Fibre optic enclosures -- Part 1: Generic specification (Endorsed by AENOR in November of 2002.) | |
| Fibre optic interconnecting devices and passive component performance standard -- Part 021-2: Fibre optic connectors terminated on single-mode fibre for category C - Controlled environment (Endorsed by AENOR in February... | |
| Fibre optic interconnecting devices and passive components - Reliability - Part 9-1: Qualification of passive optical components | |
| Fibre optic interconnecting devices and passive components performance standard - Part 061-3: Single mode fibre optic pigtailed style isolators for category U - Uncontrolled environment | |
| Fibre optic interconnecting devices and passive components performance standard -- Part 1-1: General and guidance - Interconnecting devices (connectors). (Endorsed by AENOR in June of 2001.) | |
| Fibre optic sensors - Part 2-2: Temperature measurement - Distributed sensing (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in November of 2017.) | |
| Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF) | |
| FIBREBOARDS. SPECIFICATIONS. PART 4: REQUIREMENTS FOR SOFTBOARDS. | |
| Fire-fighting hoses - Semi-rigid hoses for fixed systems | |
| Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose | |
| Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose | |
| Fixed firefighting systems - Hose systems - Part 3: Maintenance of hose reels with semi-rigid hose and hose systems with lay-flat hose | |
| Fluorescent induction lamps - Safety specifications | |
| Fuel cell technologies - Part 2: Fuel cell modules | |
| Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods | |
| Function Blocks (FB) for process control -- Part 2: Specification of FB concept and Electronic Device Description Language (EDDL) (Endorsed by AENOR in September of 2004.) | |
| Furniture - Children's cots and folding cots for domestic use - Part 1: Safety requirements | |
| Furniture - Children's cots and folding cots for domestic use - Part 2: Test methods | |
| Gas welding equipment - Safety devices - Part 1: Incorporating a flame (flashback) arrestor | |
| Gas welding equipment - Safety devices - Part 2: Not incorporating a flame (flashback) arrestor | |
| GAS-FIRED CENTRAL HEATING BOILERS. SPECIFIC REQUIREMENTS FOR CONDENSING BOILERS WITH A NOMINAL HEAT INPUT NOT EXCEEDING 70 kW. | |
| GAS-FIRED CENTRAL HEATING BOILERS. SPECIFIC REQUIREMENTS FOR THE DOMESTIC HOT WATER OPERATION OF COMBINATION BOILERS OF NOMINAL HEAT INPUT NO EXCEEDING 70 KW. | |
| General lighting - Light emitting diode (LED) products and related equipment - Terms and definitions | |
| General requirements for arc fault detection devices | |
| Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173 -- Part 1: Installed cabling (Endorsed by AENOR in February of 2003.) | |
| Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173 -- Part 1: Installed cabling (Endorsed by AENOR in May of 2001.) | |
| Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173 -- Part 1: Installed cabling. (Endorsed by AENOR in March of 2001.) | |
| Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173 -- Part 2: Patch cords and work area cords (Endorsed by AENOR in... | |
| Glass in building - Determination of thermal transmittance (U value) - Calculation method. | |
| Glass in building - Determination of thermal transmittance (U value) - Guarded hot plate method | |
| Glass in building - Determination of thermal transmittance (U value) - Heat flow meter method | |
| GLASS IN BUILDING. DETERMINATION OF THERMAL TRANSMITTANCE (U VALUE). CALCULATION METHOD. | |
| Guidance on system dependability specifications (IEC 62347:2006). (Endorsed by AENOR in July of 2007.) | |
| GUIDANCE ON THE APPLICATION OF EN 29001 AND EN 46001 AND OF EN 29002 AND EN 46002 FOR NON-ACTIVE MEDICAL DEVICES. | |
| Hazard and operability studies (HAZOP studies) - Application guide | |
| Heat shrinkable moulded shapes -- Part 2: Methods of test (IEC 62239-2:2006). (Endorsed by AENOR in February of 2007.) | |
| High availability automation networks (Endorsed by AENOR in December of 2008.) | |
| High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in April of 2018.) | |
| High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in October of 2017.) | |
| High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers | |
| High-voltage switchgear and controlgear - Part 101: Synthetic testing | |
| High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earthing switches | |
| High-voltage switchgear and controlgear - Part 103: Switches for rated voltages above 1 kV up to and including 52 kV | |
| High-voltage switchgear and controlgear - Part 104: Alternating current switches for rated voltages of 52 kV and above | |
| High-voltage switchgear and controlgear - Part 107: Alternating current fused circuit-switchers for rated voltages above 1 kV up to and including 52 kV | |
| High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear | |
| High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV | |
| High-voltage switchgear and controlgear - Part 201: AC solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV | |
| High-voltage switchgear and controlgear - Part 202: High voltage/low voltage prefabricated substation | |
| High-voltage switchgear and controlgear - Part 202: High-voltage/low-vol tage prefabricated substation | |
| High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV | |
| High-voltage switchgear and controlgear - Part 204: Rigid gas-insulated transmission lines for rated voltage above 52 kV | |
| High-voltage switchgear and controlgear - Part 207: Seismic qualification for gas-insulated switchgear assemblies for rated voltages above 52 kV | |
| High-voltage switchgear and controlgear - Part 211: Direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages above 52 kV | |
| High-voltage switchgear and controlgear - Part 212: Compact Equipment Assembly for Distribution Substation (CEADS) | |
| High-voltage switchgear and controlgear - Part 3: Digital interfaces based on IEC 61850 | |
| High-voltage switchgear and controlgear - Part 4: Handling procedures for sulphur hexafluoride (SF6) and its mixtures | |
| High-voltage switchgear and controlgear -- Part 100: Alternating-current circuit-breakers | |
| High-voltage switchgear and controlgear -- Part 205: Compact switchgear assemblies for operation at rated voltages above 52 kV | |
| Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V (IEC 62155:2003, modified) | |
| Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 1: General requirements | |
| Household electrical hair care appliances - Methods of measuring the performance | |
| Household refrigerating appliances - Characteristics and test methods - Part 1: General requirements | |
| Household refrigerating appliances - Characteristics and test methods - Part 2: Performance requirements | |
| Household refrigerating appliances - Characteristics and test methods - Part 3: Energy consumption and volume | |
| In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) | |
| Industrial communication networks - Profiles - Part 3-2: Functional safety fieldbuses - Additional specifications for CPF 2 (Endorsed by AENOR in October of 2008.) | |
| Industrial communication networks - Profiles - Part 3-3: Functional safety fieldbuses - Additional specifications for CPF 3 (Endorsed by AENOR in October of 2008.) | |
| Industrial communication networks - Profiles - Part 3-6: Functional safety fieldbuses - Additional specifications for CPF 6 (Endorsed by AENOR in October of 2008.) | |
| Industrial communication networks - Profiles -- Part 3: Functional safety fieldbuses - General rules and profile definitions (Endorsed by AENOR in October of 2008.) | |
| Industrial communication networks \xbf Profiles \xbf Part 3-1: Functional safety fieldbuses \xbf Additional specifications for CPF 1 (Endorsed by AENOR in October of 2008.) | |
| Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment | |
| Inland navigation vessels - Railings for decks - Requirements, types | |
| Instrument transformers - Part 2: Additional requirements for current transformers | |
| Instrument transformers - Part 3: Additional requirements for inductive voltage transformers | |
| Instrument transformers -- Part 1: General requirements | |
| Insulators - Glossary of terms and definitions | |
| Junction boxes for photovoltaic modules - Safety requirements and tests | |
| LEDsi lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c. - Safety specifications | |
| Lightning Protection System Components (LPSC) - Part 1: Requirements for connection components | |
| Lightning Protection System Components (LPSC) - Part 2: Requirements for conductors and earth electrodes | |
| Lightning Protection System Components (LPSC) - Part 3: Requirements for isolating spark gaps (ISG) | |
| Lightning protection system components (LPSC) - Part 4: Requirements for conductor fasteners | |
| Lightning protection system components (LPSC) - Part 5: Requirements for earth electrode inspection housings and earth electrode seals | |
| Lightning Protection System Components (LPSC) - Part 7: Requirements for earthing enhancing compounds | |
| Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 1: General rules | |
| Low-voltage switchgear and controlgear - Product data and properties for information exchange | |
| Low-voltage switchgear and controlgear enclosed equipment - Part 1: Enclosed switch-disconnectors outside the scope of IEC 60947-3 to provide isolation during repair and maintenance work | |
| Luminaire performance - Part 1: General Requirements | |
| Luminaire performance - Part 2-1: Particular requirements for LED luminaires | |
| Machine tools - Safety - Hydraulic presses | |
| Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters | |
| Managing risk in projects - Application guidelines | |
| Maritime navigation and radiocommunication equipment and systems - Shipborne radar - Performance requirements, methods of testing and required test results (Endorsed by AENOR in January of 2014.) | |
| Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) -- Part 2: Simplified voyage data recorder (S-VDR) - Performance requirements, methods of testing and required test... | |
| Mathematical expressions for reliability, availability, maintainability and maintenance support terms. | |
| Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1: Requirements for measuring instruments... | |
| Measurement procedures for materials used in photovoltaic modules - Part 1-2: Encapsulants - Measurement of volume resistivity of photovoltaic encapsulants and other polymeric materials | |
| Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength... | |
| Measurement procedures for materials used in photovoltaic modules - Part 1-5: Encapsulants - Measurement of change in linear dimensions of sheet encapsulation material resulting from applied thermal conditions | |
| Measurement procedures for materials used in photovoltaic modules - Part 1-6: Encapsulants - Test methods for determining the degree of cure in Ethylene-Vinyl Acetate | |
| Measuring relays and protection equipment - Protection communication interfacing - Part 1: General | |
| Medical device software - Software life-cycle processes (IEC 62304:2006) | |
| Medical device software - Software life-cycle processes | |
| Medical devices - Application of usability engineering to medical devices | |
| Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1: Determination of the detective quantum efficiency | |
| Medical electrical equipment - Characteristics of digital X-ray imaging devices -- Part 1-2: Determination of the detective quantum efficiency - Detectors used in mammography. | |
| Medical electrical equipment - Characteristics of digital X-ray imaging devices -- Part 1-3: Determination of the detective quantum efficiency - Detectors used in dynamic imaging | |
| Medical electrical equipment - Dosimeters with ionization chambers and/or semi-conductor detectors as used in X-ray diagnostic imaging (Endorsed by AENOR in November of 2001.) | |
| Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology | |
| Medical electrical equipment - Exposure index of digital X-ray imaging systems -- Part 1: Definitions and requirements for general radiography | |
| Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment | |
| Medical electrical equipment - Requirements for the safety of radiotherapy treatment planning systems | |
| Medical electrical equipment - Safety of radiotherapy record and verify systems | |
| Methods of measuring performances of electric hair clippers or trimmers for household use | |
| Monitoring and measuring systems used for data collection, gathering and analysis - Part 1: Device requirements | |
| Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products... | |
| Obsolescence management - Application guide (Endorsed by AENOR in March of 2009.) | |
| Organic light emitting diode (OLED) panels for general lighting - Safety requirements | |
| Performance evaluation methods of mobile household robots | |
| Photobiological safety of lamps and lamp system | |
| Photobiological safety of lamps and lamp systems - Part 5: Image projectors | |
| Photovoltaic (PV) array - On-site measurement of current-voltage characteristics | |
| Photovoltaic (PV) module performance testing and energy rating - Part 2: Spectral responsivity, incidence angle and module operating temperature measurements | |
| Photovoltaic (PV) module performance testing and energy rating -- Part 1: Irradiance and temperature performance measurements and power rating | |
| Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction | |
| Photovoltaic (PV) modules - Ammonia corrosion testing | |
| Photovoltaic (PV) modules - Transportation testing - Part 1: Transportation and shipping of module package units | |
| Photovoltaic (PV) stand-alone systems - Design verification (IEC 62124:2004) | |
| Photovoltaic (PV) systems - Characteristics of the utility interface | |
| Photovoltaic (PV) systems - Requirements for testing, documentation and maintenance - Part 1: Grid connected systems - Documentation, commissioning tests and inspection | |
| Photovoltaic concentrators (CPV) - Performance testing - Part 1: Standard conditions | |
| Photovoltaic concentrators (CPV) - Performance testing - Part 2: Energy measurement | |
| Photovoltaic concentrators (CPV) - Performance testing - Part 3: Performance measurements and power rating | |
| Photovoltaic power generating systems - EMC requirements and test methods for power conversion equipment | |
| Photovoltaic pumping systems - Design qualification and performance measurements | |
| Photovoltaic system performance monitoring - Guidelines for measurement, data exchange and analysis | |
| Photovoltaic systems - Design qualification of solar trackers | |
| Photovoltaic systems - Power conditioners - Procedure for measuring efficiency. | |
| Plastics piping and ducting systems - Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock method | |
| Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST) | |
| PLASTICS PIPING AND DUCTING SYSTEMS. POLYOLEFIN PIPES AND FITTINGS. DETERMINATION OF OXIDATION INDUCTION TIME. | |
| Plastics piping systems - Glass-reinforced plastics components - Determination of the amounts of constituents using the gravimetric method | |
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analysis and their use | |
| Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories | |
| Plywood - Classification by surface appearance - Part 1: General | |
| Plywood - Classification by surface appearance - Part 2: Hardwood | |
| Plywood - Classification by surface appearance - Part 3: Softwood | |
| Plywood - Classification by surface appearance - Part 5: Methods for measuring and expressing characteristics and defects | |
| Plywood - Specifications | |
| Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria | |
| Power installations exceeding 1 kV a.c. - Part 1: Common rules | |
| Power installations exceeding 1 kV a.c. -- Part 1: Common rules | |
| Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 2: Modular multilevel converters (Endorsed by AENOR in December of 2014.) | |
| Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 2: Modular multilevel converters (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in December of 2019.)... | |
| Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 2: Modular multilevel converters (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in November of 2023.)... | |
| Preparation of instructions - Structuring, content and presentation. | |
| Prestressed concrete pressure pipes, cylinder and non-cylinder, including joints, fittings and specific requirements for prestressing steel for pipes | |
| Protection against lightning - Part 2: Risk management | |
| Protection against lightning - Part 4: Electrical and electronic systems within structures | |
| Protection against lightning -- Part 1: General principles | |
| Protection against lightning -- Part 3: Physical damages to structures and life hazard | |
| Protection against lightning -- Part 4: Electrical and electronic systems within structures | |
| PROTECTIVE CLOTHING. PROTECTION AGAINST HEAT AND FLAME. TEST METHOD: DETERMINATION OF THE CONTACT HEAT TRANSMISSION THROUGH PROTECTIVE CLOTHING OR ITS MATERIALS. | |
| Protective gloves for firefighters (Endorsed by AENOR in September of 2008.) | |
| Radionuclide imaging devices - Characteristics and test conditions - Part 1: Positron emission tomographs | |
| Radionuclide imaging devices - Characteristics and test conditions - Part 2: Single photon emission computer tomographs | |
| Radionuclide imaging devices - Characteristics and test conditions - Part 3: Gamma camera based wholebody imaging systems | |
| Railway applications - Automated urban guided transport (AUGT) - Safety requirements | |
| Railway applications - Electric traction - Short-primary type linear induction motors (LIM) fed by power converters | |
| Railway applications - Fixed installations - Electric traction - Specific requirements for composite insulators used for overhead contact line systems | |
| Railway applications - Fixed installations - Stationary energy storage system for DC traction systems | |
| Railway applications - Rolling stock - DC supplied electronic ballasts for lighting fluorescent lamps | |
| Railway applications - Rolling stock - Power supply with onboard energy storage system - Part 1: Series hybrid system | |
| Railway applications - Urban guided transport management and command/control systems - Part 1: System principles and fundamental concepts | |
| Railway applications - Urban guided transport management and command/control systems - Part 2: Functional requirements specification | |
| Rating of direct coupled photovoltaic (PV) pumping systems | |
| Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings | |
| Reinforced concrete pressure pipes, cylinder type, including joints and fittings | |
| Reliability growth - Stress testing for early failures in unique complex systems (Endorsed by AENOR in August of 2008.) | |
| Resilient floor coverings - Determination of conventional pattern depth | |
| Resilient floor coverings - Determination of curling exposure to moisture | |
| Resilient floor coverings - Determination of exudation of plasticizers | |
| Resilient floor coverings - Determination of gelling | |
| Resilient floor coverings - Determination of seam strength | |
| Resilient floor coverings - Determination of the spreading of water | |
| Resilient floor coverings - Determination of volatile loss | |
| RESILIENT FLOOR COVERINGS - DETERMINATION OF WEAR RESISTANCE - PART 1: STUTTGART TEST | |
| Resilient floor coverings - Determination of wear resistance - Part 2: Frick-Taber test | |
| Resilient floor coverings - Polyvinyl chloride floor coverings on jute backing or on polyester felt backing or on a polyester felt with a polyvinyl chloride backing - Specification | |
| Resilient floor coverings - Polyvinyl chloride floor coverings with cork-based backing - Specification | |
| Resilient floor coverings - Polyvinyl chloride floor coverings with foam layer - Specification | |
| Resilient floor coverings - Specification for corklinoleum | |
| Resilient floor coverings - Specification for plain and decorative linoleum on a corkment backing | |
| Resilient floor coverings - Specification for plain and decorative linoleum on a foam backing | |
| Resilient floor coverings - Tiles of agglomerated composition cork with polyvinyl chloride wear layer - Specification | |
| RESILIENT FLOOR COVERINGS. DETERMINATION OF APPARENT DENSITY OF AGGLOMERATED CORK. | |
| RESILIENT FLOOR COVERINGS. DETERMINATION OF DIMENSIONAL STABILITY OF LINOLEUM TILES CAUSED BY CHANGES IN ATMOSPHERIC HUMIDITY. | |
| RESILIENT FLOOR COVERINGS. DETERMINATION OF MASS PER UNIT AREA OF A REinforcement or a backing of polyvinyl chloride floor coverings. | |
| Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements | |
| RF connectors, connector cable assemblies and cables - Intermodulation level measurement. | |
| Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures | |
| Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers | |
| Safety of power converters for use in photovoltaic power systems - Part 2: Particular requirements for inverters | |
| Safety of power converters for use in photovoltaic power systems -- Part 1: General requirements | |
| Safety of toys - Part 10: Organic chemical compounds - Sample preparation and extraction | |
| Safety of toys - Part 11: Organic chemical compounds - Methods of analysis | |
| Safety of toys - Part 12: N-Nitrosamines and N-nitrosatable substances | |
| Safety of toys - Part 13: Olfactory board games, cosmetic kits and gustative games | |
| Safety of toys - Part 14: Trampolines for domestic use | |
| Safety of toys - Part 17: Certain isothiazolinones (MIT, CIT, BIT) in aqueous toy materials | |
| Safety of toys - Part 18: Phenol in aqueous (content) and polymeric (migration) toy materials | |
| Safety of toys - Part 19: Migration of bisphenol A from toy materials | |
| Safety of toys - Part 3: Migration of certain elements. | |
| Safety of toys - Part 3: Migration of certain elements | |
| Safety of toys - Part 5: Chemical toys (sets) other than experimental sets | |
| Safety of toys \x96 Part 15: Formamide in foam toy materials (content) | |
| Safety of toys \x96 Part 16: Certain chlorinated phosphorus flame retardants (TCEP, TCPP, TDCP) in toy materials | |
| SAFETY OF TOYS. PART 3: MIGRATION OF CERTAIN ELEMENTS. | |
| Safety of woodworking machines - Part 1: Common requirements | |
| Safety requirements for power electronic converter systems and equipment - Part 1: General (Endorsed by AENOR in November of 2012.) | |
| Safety requirements for power electronic converter systems and equipment - Part 1: General (Endorsed by AENOR in October of 2014.) | |
| Safety requirements for power electronic converter systems and equipment - Part 1: General (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in March of 2017.) | |
| Safety requirements for secondary batteries and battery installations - Part 3: Traction batteries | |
| Salt mist corrosion testing of photovoltaic (PV) modules | |
| Sample preparation for measurement of mercury level in fluorescent lamps (Endorsed by AENOR in February of 2012.) | |
| Sample preparation for measurement of mercury level in fluorescent lamps and low-pressure mercury UV radiation sources (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in May of 2025.) | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Mechanical tests for sealed portable secondary cells and batteries | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Nickel-cadmium prismatic secondary single cells with partial gas recombination | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 1: Nickel-cadmium | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications | |
| Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements | |
| Semiconductor die products -- Part 1: Requirements for procurement and use (Endorsed by AENOR in January of 2006.) | |
| Semiconductor optoelectronic devices for fibre optic system applications -- Part 1: Essential ratings and characteristics. (Endorsed by AENOR in March of 2001.) | |
| Sound signalling devices for household and similar purposes | |
| Spare parts provisioning (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in August of 2017.) | |
| Specification for data logging and monitoring of lifts, escalators and passenger conveyors | |
| Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats | |
| Specification of the radio data system (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 to 108,0 MHz (Endorsed by AENOR in May of 2002.) | |
| Specifications for dedicated liquefied petroleum gas appliances - Absorption refrigerators | |
| Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires | |
| Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors | |
| SURFACE MOUNTING TECHNOLOGY -- PART 1: STANDARD METHOD FOR THE SPECIFICATION OF SURFACE MOUNTING COMPONENTS (SMDS) (Endorsed by AENOR in February of 1999.) | |
| Susceptibility of a photovoltaic (PV) module to accidental impact damage (resistance to impact test) | |
| Thermal spraying. Terminology, classification | |
| Thermal-resistant aluminium alloy wire for overhead line conductor | |
| Thermoplastics piping systems - Non-end-load-bearing elastomeric sealing ring type joints beteween pressure pipes and moulded fittings - Test method for leaktighness under internal hydrostatic pressure without end thrust | |
| Time relays for industrial and residential use - Part 1: Requirements and tests | |
| Type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses (Type B RCCBs and Type B RCBOs) | |
| Ultrasonics - Hydrophones - Characteristics and calibration in the frequency range from15 MHz to 40 MHz (Endorsed by AENOR in March of 2006.) | |
| Utility-interconnect ed photovoltaic inverters - Test procedure of islanding prevention measures | |
| Valves - Terminology - Part 1: Definition of types of valves | |
| Valves - Terminology - Part 3: Definition of terms | |
| VALVES. TERMINOLOGY. PART 2: DEFINITION OF COMPONENTS OF VALVES. | |
| Video surveillance systems for use in security applications - Part 1-1: System requirements - General | |
| Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Evaporative ageing procedure | |
| Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method | |
| Wood-based panels - Determination of formaldehyde release - Part 2: Formaldehyde release by the gas analysis method. | |
| Wood-based panels - Determination of formaldehyde release - Part 3: Formaldehyde release by the flask method | |
| WOOD-BASED PANELS. DETERMINATION OF FORMALDEHYDE RELEASE. PART 2: FORMALDEHYDE RELEASE BY THE GAS ANALYSIS METHOD. | |
| Workplace exposure. Measurement of exposure by inhalation to chemical agents. Strategy for testing compliance with occupational exposure limit values. |
| << Prev | Next >> |