Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
1000
1050
1100
1150
1200
1250
1300
1310
1320
1330
1340
1350
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1380
1390
1400
1410
1420
1450
1500
1550
1600
1620
| Product Name | Notes |
|---|---|
| "NV" CERTIFICATION MARK REQUIRED CODE BOOKS - ASME NUCLEAR SAFETY AND PRESSURE RELIEF VALVES CERTIFICATION & ACCREDITATION PACKAGE - INCLUDES ASME BPVC-IIA, BPVC-IIB, BPVC-IID, BPVC-III NCA, BPVC-V, ASME BPVC-IX, ASME... | |
| "NV" CERTIFICATION MARK REQUIRED CODE BOOKS - ASME NUCLEAR SAFETY AND PRESSURE RELIEF VALVES CERTIFICATION & ACCREDITATION PACKAGE - INCLUDES ASME BPVC-IIB, BPVC-III APP, BPVC-III NCA, BPVC-V, BPVC-IX, ASME PTC... | |
| "NV" CERTIFICATION MARK REQUIRED CODE BOOKS - ASME NUCLEAR SAFETY AND PRESSURE RELIEF VALVES CERTIFICATION & ACCREDITATION PACKAGE - INCLUDES ASME BPVC-IID, BPVC-III APP, BPVC III NCA, BPVC-V, BPVC-IX, ASME... | |
| "NV" CERTIFICATION MARK REQUIRED CODE BOOKS - ASME NUCLEAR SAFETY AND PRESSURE RELIEF VALVES CERTIFICATION & ACCREDITATION PACKAGE -INCLUDES ASME BPVC-IIA, BPVC-III APP, BPVC-III NCA, BPVC-V, BPVC-IX, ASME PTC 25,... | |
| 2015 CODE CASES - NUCLEAR COMPONENTS | |
| 2022 New York City Building Code | |
| 2022 New York City Fire Code | |
| 2022 New York City Fuel Gas Code | |
| 2022 New York City General Administrative Provisions for Construction Codes | |
| 2022 New York City Mechanical Code | |
| 2022 New York City Plumbing Code | |
| 2023 CODE CASES - NUCLEAR COMPONENTS - SUPPLEMENT NO. 1 | |
| 2023 CODE CASES - NUCLEAR COMPONENTS - SUPPLEMENT NO. 2 | |
| 2023 CODE CASES - NUCLEAR COMPONENTS - SUPPLEMENT NO. 3 | |
| 2023 CODE CASES - NUCLEAR COMPONENTS - SUPPLEMENT NO. 4 | |
| 2023 CODE CASES - NUCLEAR COMPONENTS - SUPPLEMENT NO. 5 | |
| Acoustic materials - Sound Transmission Loss, Front of Dash (FOD) | |
| Acoustic materials - Sound transmission loss, STL | |
| Acoustic sensitivity (NTFor p/F) measurement for attachment points to the car body | |
| ACTS ADOPTED BY BODIES CREATED BY INTERNATIONAL AGREEMENTS Regulation No 10 of the Economic Commission for Europe of the United Nations (UNECE) - Uniform provisions concerning the approval of vehicles... | |
| ADDENDA TO ANSI/ASME NOG-1-1983 RULES FOR CONSTRUCTION OF OVERHEAD AND GANTRY CRANES (TOP RUNNING BRIDGE, MULTIPLE GIRDER) | |
| ADDENDA TO ANSI/ASME NQA-1-1983 EDITION QUALITY ASSURANCE PROGRAM REQUIREMENTS FOR NUCLEAR FACILITIES | |
| ADDENDA TO ANSI/ASME NQA-2-1983 QUALITY ASSURANCE REQUIREMENTS FOR NUCLEAR POWER PLANTS | |
| ADDENDA TO ANSI/ASME NQA-2-1986 EDITION QUALITY ASSURANCE REQUIREMENTS FOR NUCLEAR POWER PLANTS | |
| Addenda to ASME NUM-1-2000 Rules for Construction of Cranes, Monorails, and Hoists (with Bridge or Trolley or Hoist of the Underhung Type) | |
| ADDENDA TO NOG-1-1989 RULES FOR CONSTRUCTION OF OVERHEAD AND GANTRY CRANES (TOP RUNNING BRIDGE, MULTIPLE GIRDER) | |
| Administrative exchange data for primary education | |
| Air Ducts | |
| Air quality - Electronic air monitoring - Odour (nuisance) and safety | |
| Air quality - Guidelines for detection of diffuse VOC emissions with optical gas imaging | |
| Air quality - Odour measurements - Odour measurement and calculation | |
| Amendment A1 - Intravascular catheters - Sterile and single-use catheters - Part 1: General requirements (ISO 10555-1:2013/Amd 1:2017) | |
| Amendment A1 - Welding - Recommendations for welding of metallic materials - Part 2: Arc welding of ferritic steels | |
| Amendment to NS-ISO 594-1:1993 - Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment - Part 1: General requirements (ISO 594-1:1986) | |
| An Assessment of Design Control Practices and Design Reconstitution Programs in The Nuclear Power Industry | |
| ASHRAE Standard 160P\x97Criteria for Moisture Control Design Analysis in Buildings | |
| Assembly tools for screws and nuts - Hand torque tools - Part 1: Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance... | |
| Assembly tools for screws and nuts - Hand torque tools - Part 2: Requirements for calibration and determination of measurement uncertainly (ISO 6789-2:2017) | |
| Background Information for Addressing Adequacy or Optimization of ASME BPVC Section III, Division 5 Rules for Metallic Components | |
| Background Information for Addressing Adequacy or Optimization of ASME BPVC Section III, Division 5 Rules for Nonmetallic Core Components | |
| Basic Asphalt Recycling Manual | |
| BEARING BABBITTING PROCEDURES | |
| Best Practice... Next Practice. How to survive, innovate and grow in an ever changing world | |
| Bio-based products - Bio-based content - Part 1: Determination of the bio-based content using the radiocarbon analysis and elemental analysis | |
| Biological evaluation of medical devices - Part 6: Tests for local effects after implantation (ISO 10993-6:2007) | |
| Biological evaluation of medical devices - Part 6: Tests for local effects after implantation (ISO 10993-6:2016) | |
| BOTTLES, SCREWCAP, GLASS (LABORATORY USE) | |
| Brush-Off Blast Cleaning | |
| BULB, DROPPING, PIPET | |
| BURET, STRAIGHT, PRECISION | |
| CASSEROLE, LABORATORY, PORCELAIN | |
| Characterization of pavement texture by use of surface profiles - Part 5: Determination of megatexture (ISO 13473-5:2009) | |
| Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Al, Ti and P by inductively coupled plasma optical emission spectrometry | |
| Circuit integrity under fire conditions - Guideline for transmission paths | |
| CLAMPS, UTILITY, LABORATORY, AND HOLDERS, BURET AND CLAMP | |
| Classification of hazardous areas with respect to explosion hazard - Part 2: Dust explosion hazard, based on NEN-EN-IEC 60079-10-2:2015 | |
| Code national de la plomberie \x96 Canada 2005 | |
| Code of Practice for Deep Geothermal Wells | |
| Code of practice for Light Timber Frame Buildings not requiring specific design | |
| Code of practice gas installations - Section gas pipe work - Part 13: Commissioning, operation, maintenance and decommissioning of gas pipe work with a maximum operating pressure = 500 mbar... | |
| Code of practice gas installations - Section gas pipework - Part 1: Determination of gas tightness of the gas installation - Standard method - Guidelines for NEN 1078 and NEN... | |
| Colorimetry - Part 2: CIE standard illuminants (ISO 11664-2:2007) | |
| Colorimetry - Part 5: CIE 1976 L*u*v* Colour space and u', v' uniform chromaticity scale diagram (ISO/CIE 11664-5:2016) | |
| Commission Regulation Amending Annexes II and III to Regulation (EC) No 396/2005 of the European Parliament and of the Council as regards maximum residue levels for dimethomorph, indoxacarb, pyraclostrobin and... | |
| COMMISSION REGULATION amending Regulation (EC) No 1275/2008 with regard to ecodesign requirements for standby, off mode electric power consumption of electrical and electronic household and office equipment, and amending Regulation... | |
| COMMISSION REGULATION amending Regulation (EC) No 1907/2006 of the European Parliament and of the Council on the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) as regards Annex XVII | |
| COMMISSION REGULATION concerning a technical specification for interoperability relating to the \x91rolling stock - locomotives and passenger rolling stock\x92 subsystem of the rail system in the European Union | |
| COMMISSION REGULATION concerning particular requirements as regards the requirements laid down in Council Directives 90/385/EEC and 93/42/EEC with respect to active implantable medical devices and medical devices manufactured utilising tissues... | |
| COMMISSION REGULATION concerning type-approval requirements for windscreen wiper and washer systems of certain motor vehicles and implementing Regulation (EC) No 661/2009 of the European Parliament and of the Council concerning... | |
| COMMISSION REGULATION fixing the Community withdrawal and selling prices for the fishery products listed in Annex I to Council Regulation (EC) No 104/2000 for the 2004 fishing year | |
| COMMISSION REGULATION fixing the definitive rate of refund and the percentage of system B export licences to be issued in the fruit and vegetables sector (tomatoes, oranges, lemons, table grapes... | |
| COMMISSION REGULATION implementing and amending Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and... | |
| COMMISSION REGULATION implementing Directive 2005/32/EC of the European Parliament and of the Council with regard to ecodesign requirements for household refrigerating appliances | |
| COMMISSION REGULATION implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for fans driven by motors with an electric input power between 125... | |
| COMMISSION REGULATION implementing Regulation (EC) No 79/2009 of the European Parliament and of the Council on type-approval of hydrogen-powered motor vehicles | |
| Commission Regulation of 22 July 2009 implementing Directive 2005/32/EC of the European Parliament and of the Council with regard to ecodesign requirements for household refrigerating appliances | |
| COMMISSION REGULATION on electronic instructions for use of medical devices | |
| COMMISSION REGULATION on good manufacturing practice for materials and articles intended to come into contact with food | |
| COMMISSION REGULATION on plastic materials and articles intended to come into contact with food | |
| COMMISSION REGULATION on recycled plastic materials and articles intended to come into contact with foods and amending Regulation (EC) No 2023/2006 | |
| COMMISSION REGULATION on the opening of additional quotas for imports into the Community of certain textile products originating in certain third countries participating in trade fairs organised in 1999 in... | |
| Comparison of ASME NQA-1 and ISO 9001 | |
| Component noise - A/C compressor clutch noise | |
| Component noise - A/C noise | |
| Component noise - Ancillary system noise | |
| Component noise - Convertible soft top actuating | |
| Component noise - Electrical Park Brake Shift Lock (subsystem) | |
| Component noise - Electrical Park Brake Shift Lock | |
| Component noise - Fuel pump | |
| Component noise - HVAC stepper motors (subsystem) | |
| Component noise - HVAC stepper motors | |
| Component noise - HVAC-system (bare module) | |
| Component noise - HVAC-system | |
| Component noise - Moveable Roof | |
| Component noise - Power mirror | |
| Component noise - Power steering system | |
| Component noise - Power tailgate | |
| Component noise - Purge valve (component) | |
| Component noise - Purge valve | |
| Component noise - Radiator fan | |
| Component noise - Seat belt reminder signal | |
| Component noise - Vacuum pump | |
| Component noise - Ventilated seat | |
| Component noise - Window regulator | |
| Component noise - Windshield wiper and washer noise | |
| Concrete Construction | |
| Concrete structures standard Part 1: The design of concrete structures Part 2: Commentary on the design of concrete structures | |
| Conditions of Contract for Building and Civil Engineering Construction | |
| Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment - Part 1: General requirements (= EN 20594-1:1993) (ISO 594-1:1986) | |
| Contaminated Runways | |
| COPPER TUBES for Water, Gas, and Sanitation Metric Units | |
| Corrigendum AC - Sterilization of medical devices - Microbiological methods - Part 1: Determination of a population of microorganisms on products (ISO 11737-1:2006/Cor 1:2007) | |
| Corrigendum to Regulation of the European Parliament and of the Council on persistent organic pollutants and amending Directive 79/117/EEC | |
| CRUCIBLES, FILTERING AND IGNITION, AND COVERS, LABORATORY | |
| CYLINDER, GRADUATED, LABORATORY; GLASS | |
| Decision of the EEA Joint Committee Amending Annex xxi (Statistics) to the EEA Agreement | |
| Design of concrete structures for the storage of liquids | |
| Development of Simple Cooling Coil Models for Simulation of HVAC Systems | |
| DISH, CULTURE, PETRI (GLASS) | |
| DISH, EVAPORATING, NONMETALLIC | |
| DISH, EVAPORATING, PLATINUM | |
| Dynamic stiffness at chassis/body | |
| Dynamic stiffness at the engine mount body side (50-500Hz) ( & Mobility) | |
| Dynamic Stiffness engine bracket | |
| Energetic, Exergetic and Environmental Assessments of the Edremit Geothermal District Heating System | |
| Energy Conservation Construction Code of New York State | |
| Engine noise and vibration - Brand character | |
| Engine noise and vibration - Engine roughness | |
| Engine noise and vibration - Idle noise | |
| Engine noise and vibration - Idle vibrations | |
| Engine noise and vibration - Low speed booming | |
| Engine noise and vibration - Low speed vibration | |
| Engine noise and vibration - Order Analysis sweep 1500 - 5500 rpm | |
| Engine noise and vibration - Seat vibration 1500-5500 rpm | |
| Engine noise and vibration - Take-off noise & vibration | |
| Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings | |
| Eurocode 3: Design of steel structures - Part 1-6: Strength and stability of shell structures | |
| Evolution of Quality Assurance Principles and Requirements in the U.S. Nuclear Industry | |
| Existing Building Code of New York State | |
| Explosive atmospheres - Part 32-1: Electrostatic Hazards - Guidance | |
| Explosive atmospheres - Part 34: Application of quality systems for equipment manufacture (ISO/IEC 80079-34:2011) | |
| Explosive atmospheres - Part 40: Requirements for process sealing between flammable process fluids and electrical systems | |
| Exterior noise - Alternator | |
| Exterior noise - Engine | |
| Exterior noise - Exhaust system | |
| Exterior noise - Exterior noise quality | |
| Exterior noise - Intake system | |
| Exterior noise - Pass by noise | |
| Exterior noise - Static exhaust system noise | |
| Exterior noise - Tires | |
| Faucets, Valves and Accessories for Hydraulic Drinking Water Installations | |
| Fiberglass-Reinforce d Plastic (FRP) Linings Applied to Bottoms of Carbon Steel Aboveground Storage Tanks | |
| FILLER, PIPET, RUBBER | |
| Fire Code and Property Maintenance Code of New York State | |
| Fire Code of New York State | |
| Fixing Facility Outages: Building the Tools to Make It Happen | |
| FLASK, VOLUMETRIC | |
| Fuel Gas Code of New York State | |
| GAP ANALYSIS FOR ADDRESSING ADEQUACY OR OPTIMIZATION OF ASME BPVC SECTION III, DIVISION 5 RULES FOR METALLIC COMPONENTS | |
| Geothermal Heat Rejection Systems for Data Centers | |
| GRID, WIRE GAUZE, LABORATORY | |
| GUIDANCE FOR DETERMINATION OF RISK-INFORMED SAFETY CLASSIFICATION FOR LIGHT WATER REACTOR NUCLEAR FACILITY PRESSURE RETAINING COMPONENTS | |
| Guidance on Inerting for the Prevention of Explosions | |
| Guide for Design and Construction of Near-Surface Mounted Titanium Alloy Bars for Strengthening Concrete Structures | |
| Guide for desing and Construction of Near-Surface Mounted Titanium Alloy Bars for Strengthening Concrete Structures | |
| GUIDE FOR PREPARATION OF NEMA STANDARDS PUBLICATIONS | |
| Gust and Continuous Turbulence Design Loads | |
| HANDLES: HICKORY, STRIKING TOOL | |
| HOUSING, ALTERATIONS AND SMALL BUILDINGS CONTRACT | |
| Implantable peripheral nerve stimulators | |
| Implantable spinal cord stimulators | |
| Industrial Blast Cleaning | |
| Industrial Coating and Lining Application Specialist Qualification and Certification | |
| Information and documentation - Document storage requirements for archive and library materials | |
| Information technology - Security techniques - Information security management systems - Overview and vocabulary (ISO/IEC 27000:2016) | |
| Information technology - Security techniques - Information security management systems - Requirements (ISO/IEC 27001:2013 including Cor 1:2014 and Cor 2:2015) | |
| Information technology - Security techniques - Information security management systems - Requirements | |
| Interim Guide to Visual Reference Photographs for Steel Cleaned by Water Jetting | |
| INTERPRETATIONS TO NQA-1-1989 EDITION QUALITY ASSURANCE PROGRAM REQUIREMENTS FOR NUCLEAR FACILITIES | |
| Intracranial Pressure Monitoring Devices | |
| Intravascular catheters - Sterile and single-use catheters - Part 1: General requirements (ISO 10555-1:2013, Corrected version 2013-07-01) | |
| JARS, CYLINDRICAL | |
| Joint Surface Preparation Standard Commercial Blast Cleaning | |
| Joint Surface Preparation Standard Near-White Metal Blast Cleaning | |
| Joint Surface Preparation Standard White Metal Blast Cleaning | |
| KEG, WOOD, SLACK | |
| Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 1: Definitions and general principles (ISO 21254-1:2011) | |
| Light and lighting \x96 Energy performance of lighting in buildings | |
| Loose steel tubes for tube and coupler scaffolds - Technical delivery conditions | |
| Managing for the sustained success of an organization - A quality management approach (ISO 9004:2009) | |
| Manual for Standards Writing | |
| Marine fish farms - Requirements for site survey, risk analyses, design, dimensioning, production, installation and operation | |
| Marine Industry - Steel tubes - Seamless and welded | |
| Measurement of Vibration Transfer Functions from Body Attatchment Points | |
| Mechanical Code of New York State | |
| Medical devices - Application of risk management to medical devices (ISO 14971:2007, Corrected version 2007-10-01) | |
| Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2018) | |
| Methods of Test for Concrete Part 1: Tests Relating to Fresh Concrete | |
| Methods of Test for Concrete Part 2: Tests Relating to the Determination of Strength of Concrete | |
| Minimum Stress Grade for Truss Chords | |
| Modal Analysis Trimmed body | |
| Modal Analysis, chassie or powertrain in vehicle | |
| Modal Analysis, components in complete vehicle | |
| Mode map | |
| MORTAR AND PESTLE | |
| National Standard Plumbing Code Illustrated | |
| National Transportation Communications for ITS Protocol (NTCIP) Definitions for Actuated Traffic Signal Controller Units | |
| National Transportation Communications for ITS Protocol (NTCIP) Global Object Definitions | |
| National Transportation Communications for ITS Protocol - Application Profile for DATEX-ASN (AP-DATEX) | |
| National Transportation Communications for ITS Protocol - Ethernet Subnetwork Profile | |
| National Transportation Communications for ITS Protocol - Internet (TCP/IP and UDP/IP) Transport Profile | |
| National Transportation Communications for ITS Protocol - Object Definitions for Environmental Sensor Stations (ESS) | |
| National Transportation Communications for ITS Protocol - Object Definitions for Ramp Meter Control (RMC) Units | |
| National Transportation Communications for ITS Protocol - Point to Multi-Point Protocol Using RS-232 Subnetwork Profile | |
| National Transportation Communications for ITS Protocol - Point-to-Point Protocol over RS-232 Subnetwork Profile | |
| National Transportation Communications for ITS Protocol - Transportation Transport Profile | |
| National Transportation Communications for ITS Protocol Application Profile for XML Message Encoding and Transport in ITS Center-to-Center Communications | |
| National Transportation Communications for ITS Protocol Center-to-Center Naming Convention Specification | |
| National Transportation Communications for ITS Protocol Data Element Definitions for Transportation Sensor Systems | |
| National Transportation Communications for ITS Protocol Field Management Stations (FMS)\x97Part 1: Object Definitions for Signal System Masters (SSM) | |
| National Transportation Communications for ITS Protocol File Transfer Protocol Application Profile | |
| National Transportation Communications for ITS Protocol Infrastructure Standards Security Assessment (ISSA) | |
| National Transportation Communications for ITS Protocol Object Definition for Electrical and Lighting Management Systems (ELMS) | |
| National Transportation Communications for ITS Protocol Object Definitions for Closed Circuit Television (CCTV) Camera Control | |
| National Transportation Communications for ITS Protocol Object Definitions for Closed Circuit Television (CCTV) Switching | |
| National Transportation Communications for ITS Protocol Object Definitions for Data Collection and Monitoring (DCM) Devices | |
| National Transportation Communications for ITS Protocol Object Definitions for Electrical and Lighting Management Systems (ELMS) | |
| National Transportation Communications for ITS Protocol Object Definitions for Signal Control and Prioritization | |
| National Transportation Communications for ITS Protocol Octet Encoding Rules (OER) Base Protocol | |
| National Transportation Communications for ITS Protocol Point to Multi-Point Protocol Using FSK Modem Subnetwork Profile | |
| National Transportation Communications for ITS Protocol Procedures for Creating Management Information Base (MIB) Files | |
| National Transportation Communications for ITS Protocol Profile Framework | |
| National Transportation Communications for ITS Protocol Simple Transportation Management Framework Application Profile | |
| National Transportation Communications for ITS Protocol Structure and Identification of Management Information (SMI) | |
| National Transportation Communications for ITS Protocol Testing and Conformity Assessment Documentation within NTCIP Standards Publications | |
| National Transportation Communications for ITS Protocol Transportation Management Protocols | |
| National Transportation Communications for ITS Protocol Trivial File Transfer Protocol Application Profile | |
| National Transportation Communications for ITS Protocol-Class B Profile | |
| National Transportation Communications for ITS Protocol-Simple Transportation Management Framework | |
| Natural frequencies and modal damping for instrument panel in complete vehicle, trimmed body or rigid mock-up | |
| Natural Frequency for Cross Car beam (Rigid Test Rig) | |
| Natural Frequency for Steering Column (Rigid base) | |
| Natural Frequency, Steering System | |
| Network Reliability Council Focus Group IV Essential Communications During Emergencies Team Report | |
| Network Strategy Business Procedures - Project Delivery and Execution Requirements Procedure (Electricity) | |
| Network Strategy Business Procedures - Project Management Execution Requirements | |
| Network Strategy Business Procedures - QA Auditing Requirements (Electrical) | |
| Network Strategy Business Procedures - Quality Monitoring of Construction Projects | |
| Network Strategy Business Procedures - Resources Programming (Electrical) | |
| Network Strategy Business Procedures - The Management of Incident Investigation and Audit Report Recommendations | |
| New York Building Code | |
| Node Cookbook | |
| Node Web Development | |
| Node.js Design Patterns | |
| Node.js Web Development | |
| Noise by handle - General | |
| Nomenclature for Subjective Rating Processes | |
| Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes | |
| Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment | |
| Non-invasive Ventilation and Weaning: Principles and Practice | |
| Non-Specular Surface Finish on Bare Overhead Aluminum Conductors | |
| Non-traditional houses: Identifying non-traditional houses in the UK 1918-75 - DIGITAL EDITION (AP 294) | |
| NORMA CEI 64-8 PER IMPIANTI ELETTRICI UTILIZZATORI CRITERI DI APPLICABILIT\xc0 PRESCRIZIONI DI PROGETTAZIONE ED ESECUZIONE DECRETO MINISTERIALE 22 GENNAIO 2008, N.37 | |
| NORME SUR L'ISOLANT THERMIQUE DE NORME CAN/ULC-S702-97 NATIONALE DU CANADA FIBRES MIN\xc9RALES POUR B \xc2TIMENTS | |
| North American Storage Capacity for Light Hydrocarbons and U.S. LP-Gas Import Terminals | |
| NOVAAR Competition Handbook | |
| NPA 25D-320 and NPA 26B-15 | |
| NPRA SURVEY, FINAL REPORT: 1996 API/NPRA SURVEY OF REFINING OPEATIONS AND PRODUCT QUALITY | |
| NSF Protocol P248 Military Operations Microbiological Water Purifiers | |
| NSP CUSTOMARY A-INDEX | |
| NSP CUSTOMARY B-BOLTS | |
| NSP CUSTOMARY C-SCREWS | |
| NSP CUSTOMARY D-MISC | |
| NSP CUSTOMARY E-NUTS | |
| NSP CUSTOMARY F-WASHERS | |
| NSP CUSTOMARY G-RIVET | |
| NSP CUSTOMARY J-PINS | |
| NSP CUSTOMARY K-FASTENERS | |
| NSP CUSTOMARY L-FITTING | |
| NSP CUSTOMARY Z-ADDENDUM | |
| NSP METRIC AA-DIMENSIONAL & GAGING | |
| NSP METRIC AA-MATERIAL & PERFORMANCE SPECIFICATIONS FOR STANDARD AND UTILITY PARTS | |
| NSP METRIC MA-INDEX | |
| NSP METRIC MB-BOLTS | |
| NSP METRIC MC-SCREWS | |
| NSP METRIC MD-MISC | |
| NSP METRIC ME-NUTS | |
| NSP METRIC MF-WASHERS | |
| NSP METRIC MG-RIVETS | |
| NSP METRIC MJ-PINS | |
| NSP METRIC MK-FASTENERS | |
| NTF at chassis / body connection points | |
| NTF at engine mount | |
| Nuclear EQ Sourcebook: A compilation of Documents for Nuclear Equipment Qualification | |
| NUMERICAL INDEX | |
| NumPy Cookbook | |
| Nutrition in Public Health: Principles, Policies, and Practice | |
| Nutrition Support for the Critically Ill Patient: A Guide to Practice | |
| Nutritional Assessment of Athletes | |
| Object Definitions for Dynamic Message Signs (DMS) | |
| Offshore installations - Weights engineering - Requirements for weight reports | |
| Offshore installations - Weights engineering - Specification for weighing of major assemblies | |
| Offshore installations - Weights engineering - Specification for weight data from suppliers and weighing of bulk and equipment | |
| Offshore installations - Weights engineering - Terminology | |
| Optical emission analysis of low alloy steels (routine method) - Guidelines for the preparation of standard routine method for optical emission spectrometry | |
| Optimizing Data Center TCO: Efficiency Metrics and an Infrastructure Cost Model | |
| Oval manhole covers - Gaskets | |
| Paints and coatings - Approval and certification of surface treatment inspectors | |
| PALLET, MATERIALS HANDLING, PLYWOOD, DOUBLE FACED STRINGER AND BLOCK CONSTRUCTION | |
| PALLETS, MATERIAL HANDLING, WOOD, STRINGER CONSTRUCTION, 2-WAY AND 4-WAY (PARTIAL) | |
| PAPER, FILTER, ANALYTICAL | |
| PAPER, LENS | |
| Performance Measurements and Quality Control Guidelines for Non-Imaging Intraoperative Gamma Probes | |
| Performance Measurements of Position Emission Tomographs | |
| PERFORMANCE MEASUREMENTS OF SCINTILLATION CAMERAS | |
| PERFORMANCE MEASUREMENTS OF SMALL ANIMAL POSITRON EMISSION TOMOGRAPHS | |
| Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2018)... | |
| Petroleum, petrochemical and natural gas industries - Flare details for general refinery and petrochemical service (ISO 25457:2008) | |
| PIE CRUST MIX; PREPARED | |
| PIE CRUST, PREFORMED, GRAHAM CRACKER | |
| PIPET, BLOOD CHEMISTRY (MICRO-FOLIN) | |
| PIPET, MEASURING | |
| PIPET, SEROLOGICAL, SAHLI, DILUTING, HEMOGLOBINOMETER, 0.02 ML. | |
| PIPET, VOLUMETRIC (TRANSFER) | |
| PIPET, VOLUMETRIC; MICRO, LANG-LEVY DESIGN | |
| Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008) | |
| PLATE, SPOT TEST, WHITE PORCELAIN | |
| Pliable, permeable building underlays | |
| Plumbing Code of New York State | |
| Plumbing Code, Mechanical Code and Fuel Gas Code of New York State | |
| PLYWOOD, CONTAINER GRADE | |
| PLYWOOD, FLAT PANEL | |
| PNEUMATIC STANDARDS FOR INDUSTRIAL EQUIPMENT | |
| Portland-Limestone Filler Cement | |
| Powertrain transmission path analysis (TPA) | |
| Pressure loads | |
| Property Maintenance Code of New York State | |
| Protection against lightning - Guidance to the NEN-EN-IEC 62305 series | |
| Protective clothing for firefighters - Physiological impact - Part 1: Measurement of coupled heat and moisture transfer with the sweating torso (ISO 18640-1:2018) | |
| QUALITY ASSURANCE PROGRAM REQUIREMENTS FOR NUCLEAR FACILITIES | |
| Quality Assurance Program Requirements for Nuclear Facility Applications | |
| Quality Assurance Program Requirements for the Collection of Scientific and Technical Information for Site Characterization of High-Level Nuclear Waste Repositories | |
| Quality Assurance Requirements for Nuclear Facility Applications | |
| QUALITY ASSURANCE REQUIREMENTS FOR NUCLEAR POWER PLANTS | |
| Quality management - Guidelines for configuration management | |
| Radiofrequency Fields Part 1: Maximum Exposure Levels - 3 kHz to 300 GHz | |
| RDT Standard | |
| REGULATION OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, amending Directive 1999/45/EC and repealing Council... | |
| REGULATION OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL concerning type-approval requirements for the general safety of motor vehicles, their trailers and systems, components and separate technical units intended therefor... | |
| REGULATION OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on European standardisation, amending Council Directives 89/686/EEC and 93/15/EEC and Directives 94/9/EC, 94/25/EC, 95/16/EC, 97/23/EC, 98/34/EC, 2004/22/EC, 2007/23/EC, 2009/23/EC and 2009/105/EC... | |
| REGULATION OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on fluorinated greenhouse gases and repealing Regulation (EC) No 842/2006 | |
| REGULATION OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on the approval and market surveillance of agricultural and forestry vehicles | |
| REGULATION OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on the sound level of motor vehicles and of replacement silencing systems, and amending Directive 2007/46/EC and repealing Directive 70/157/EEC | |
| REGULATION OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on type-approval of motor vehicles and engines with respect to emissions from heavy duty vehicles (Euro VI) and on access to... | |
| Reinforced Cockpit Doors to Enhance Aeroplane Security | |
| Residential Code of New York State | |
| RICE, MILLED | |
| RICE, WHITE, THERMOSTABILIZED, TRAY PACK | |
| Risk management - Principles and guidelines | |
| Road noise and vibration - Coarse road | |
| Road noise and vibration - Infra noise | |
| Road noise and vibration - Smooth road | |
| Road noise and vibration - Steering wheel vibration and oscillations | |
| Road noise and vibration - Transient noise and shake | |
| Road noise and vibration | |
| RULE, LABORATORY (MEASURING, PLASTIC AND WOOD) | |
| Rules for Construction of Cranes, Monorails, and Hoists (with Bridge or Trolley or Hoist of the Underhung Type) | |
| RULES FOR CONSTRUCTION OF OVERHEAD AND GANTRY CRANES (TOP RUNNING BRIDGE, MULTIPLE GIRDER) | |
| Sealings - Acoustic seals general | |
| Sealings - Compartment tightness | |
| Sealings - Sound Transmission Loss, Convertible | |
| Sealings - STL, Door system | |
| Sealings - Water intrusion | |
| SECTION AA - FINISHES | |
| SLIDE, MICROSCOPE | |
| Snow chains for vehicles classes N2, N3, M2, M3, O3, O4 - Requirements, testing and marking | |
| SPATULA, LABORATORY (METAL BLADE) | |
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 7: Overlay welding (ISO 15614-7:2016) | |
| Specification for Concrete Production | |
| Specification for Portland and blended cements (General and special purpose) | |
| Specification for pozzolan for use with Portland and blended cement | |
| Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel | |
| Specification for the production of reprocessed gypsum from waste plasterboard | |
| Squeaks & Rattle - General | |
| Squeaks & Rattle - S&R generated by audio system | |
| STAKES, WOOD | |
| STAND, LABORATORY APPARATUS SUPPORT | |
| Standard on Incident Management (IM) Objects | |
| Standard on Passenger Information (PI) Objects | |
| Standard on Scheduling/Runcuttin g (SCH) Objects | |
| Standard on Spatial Representation (SP) Objects | |
| Standards and Intellectual Property Rights | |
| Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Sorptive sampling method followed by solvent extraction or thermal desorption | |
| Steel structures Standard Part 1: Materials, fabrication, and construction | |
| STEEL STRUCTURES STANDARD | |
| Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 20857:2010) | |
| Sterilization of health care products - Microbiological methods - Part 1: Determination of a population of microorganisms on products (ISO 11737-1:2018) | |
| Sterilization of medical devices - Microbiological methods - Part 1: Determination of a population of microorganisms on products (ISO 11737-1:2006) | |
| Structural Design Actions Part 5 : Earthquake actions \x96 New Zealand - Commentary | |
| Structural Design Actions Part 5 : Earthquake actions New Zealand | |
| Structural feel - Cowl shake | |
| Surface Preparation and Cleaning of Metals by Waterjetting Prior to Recoating | |
| Surface Preparation of Concrete | |
| Surface roughness - Guidance for attainable roughness values R[a] for various machining operations | |
| Sustainability framework for biomass - Part 4: Chain of custody requirements | |
| TAPIOCA | |
| Text with EEA relevance OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on type approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5... | |
| The National Technology Transfer and Advancement Act | |
| Thermal insulation for building equipment and industrial installations - Calculation rules (ISO 12241:2008) | |
| Thin-Film Organic Linings Applied in New Carbon Steel Process Vessels | |
| TISSUE GRINDER, TENBROECK | |
| Total sound comfort - Constant speed 80 - 100 km/h | |
| Total sound comfort - Sweep 50 - 150 km/h | |
| Training Program Reference Material for Use with ASME/ANS RA-Sa-2009 | |
| TRANSCUTANEOUS ELECTRICAL NERVE STIMULATORS | |
| Transit Communications Interface Profiles Part of the National Transportation Communications for ITS Protocol Standard on On-Board (OB) Objects | |
| Transit Communications Interface Profiles Part of the National Transportation Communications for ITS Protocol TCIP Framework Standard | |
| Transit Communications Interface Profiles | |
| Transmissibility engine suspension | |
| Transmission noise - Gear rattle | |
| Transmission noise - Gear whine | |
| Transmission path analysis (TPA): Power-train related dynamic forces via body mounts. | |
| TRIPOD, LABORATORY APPARATUS | |
| TUBE, CAPILLARY, BLOOD SAMPLE | |
| TUBE, CENTRIFUGE (PLASTIC) | |
| Vertical natural frequency of front strut/wheel assembly | |
| VTF at engine mount | |
| Water and aggregate for concrete | |
| Water quality - Requirements for establishing performance characteristics of quantitative microbiological methods (ISO 13843:2017) | |
| Welding - Recommendations for welding of metallic materials - Part 2: Arc welding of ferritic steels | |
| Wind noise - Discrete tones and sudden noise level changes during speed sweep | |
| Wind noise - Discrete tones at elevated temperature | |
| Wind noise - Road test | |
| Wind noise - Windshield wiper sweep noise |
| << Prev | Next >> |