Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
450
500
550
600
650
700
730
740
750
760
770
780
785
786
787
788
789
790
791
792
793
794
795
796
797
800
810
820
830
840
850
900
950
1000
1050
1100
1150
1500
1620
| Product Name | Notes |
|---|---|
| Analysis techniques for dependability - Event Tree Analysis (ETA) | |
| Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz) | |
| Assessment of lighting equipment related to human exposure to electromagnetic fields | |
| Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz - 300 GHz) | |
| Audio/video, information and communication technology equipment Part 1: Safety requirements | |
| Automation systems in the process industry - Factory Acceptance Test (FAT), Site Acceptance Test (SAT) and Site Integration Test (SIT) | |
| Battery charge controllers for photovoltaic systems - Performance and functioning | |
| Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET) | |
| Bushings for d.c. application | |
| Cable glands for electrical installations | |
| Cable management systems - Cable ties for electrical installations | |
| Calibration of tuneable laser sources | |
| Circuiti stampati - Parte 4: Circuiti stampati multistrato rigidi con collegamenti tra gli strati - Specifica settoriale - Sezione 1 : Dettagli sulla capacit\xe0 - Livelli di prestazione A, B... | |
| Circuiti stampati - Parte 4: Circuiti stampati multistrato rigidi con collegamenti tra gli strati - Specifica settoriale | |
| Commissioning of electrical, instrumentation and control systems in the process industry - Specific phases and milestones | |
| Common control interface for networked digital audio and video products Part 2: Audio | |
| Common control interface for networked digital audio and video products Part 3: Video | |
| Common control interface for networked digital audio and video products Part 5-1: Transmission over networks - General | |
| Common control interface for networked digital audio and video products Part 5-2: Transmission over networks - Signalling | |
| Common Control Interface for networked digital audio and video products Part 7: Measurements (TA 4) | |
| Common control interface for networked digital audio and video products | |
| Componenti e dispositivi attivi a fibra ottica - Norme del contenitore e dell'interfaccia - Parte 10: Ricetrasmettitori SFF MU duplex a 20 pin | |
| Componenti e dispositivi attivi a fibra ottica - Norme del contenitore e dell'interfaccia - Parte 1: Generalit\xe0 e linee guida | |
| Componenti e dispositivi attivi a fibra ottica - Norme del contenitore e dell'interfaccia - Parte 4: Ricetrasmettittori PN 1x9 per fibra ottica in plastica | |
| Componenti e dispositivi attivi a fibra ottica - Norme del contenitore e dell'interfaccia - Parte 5: Moduli a fibra ottica SC 1x9 | |
| Componenti e dispositivi attivi a fibra ottica - Norme del contenitore e dell'interfaccia - Parte 6: Ricetrasmettitori ATM-PON | |
| Componenti e dispositivi attivi a fibra ottica - Norme del contenitore e dell'interfaccia - Parte 8: Ricetrasmettitori SFF LC a 20 pin | |
| Componenti e dispositivi attivi a fibra ottica - Norme prestazionali - Parte 6: Ricetrasmettitori a 250 Mbit/s con emissione a 650 nm per fibra ottica plastica | |
| Composite station post insulators for substations with a.c. voltages greater than 1 000 V up to 245 kV - Definitions, test methods and acceptance criteria | |
| Composite station post insulators for substations with AC voltages greater than 1 000 V up to 245 kV Part 1: Dimensional, mechanical and electrical characteristics | |
| Concentric lay stranded overhead electrical conductors containing one or more gap(s) | |
| Connectors for requirements - electronic - equipment - - - Quality - assessment - Part 1: Generic specification | |
| Consumer audio/video equipment digital interface with plastic optical fibre | |
| Control technology - Rules for the designation of measuring instruments | |
| D.C. or A.C. supplied electronic control gear for LED modules Performance requirements | |
| DC or AC supplied electronic control gear for LED modules - Performance requirements | |
| Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) | |
| Dependability of products containing reused parts - Requirements for functionality and test | |
| Determination of certain substances in electrotechnical products Part 1: Introduction and overview | |
| Determination of certain substances in electrotechnical products Part 2: Disassembly, disjointment and mechanical sample preparation | |
| Determination of certain substances in electrotechnical products Part 3-1: Screening - Lead, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometry | |
| Determination of certain substances in electrotechnical products Part 3-2: Screening - Total bromine in polymers and electronics by Combustion - Ion Chromatography | |
| Determination of certain substances in electrotechnical products Part 4: Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS | |
| Determination of certain substances in electrotechnical products Part 5: Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS | |
| Determination of certain substances in electrotechnical products Part 6: Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatography-mass spectrometry (GC-MS) | |
| Determination of certain substances in electrotechnical products Part 7-1: Determination of the presence of hexavalent chromium (Cr(VI)) in colorless and colored corrosion-protected coatings on metals by the colorimetric method | |
| Determination of certain substances in electrotechnical products Part 7-2: Hexavalent chromium - Determination of hexavalent chromium (Cr(VI)) in polymers and electronics by the colorimetric method | |
| Determination of certain substances in electrotechnical products Part 8: Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS), gas chromatography-mass spectrometry using a pyrolyzer/thermal desorption accessory (Py/TD-GC-MS) | |
| Determination of RF field strength, power density and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure | |
| Digital addressable lighting interface - Part 205: Supply voltage controller for incandescent lamps (device type 4) | |
| Digital addressable lighting interface \x96 Part 302: Particular requirements - Input devices - Absolute input devices | |
| Digital addressable lighting interface \x96 Part 303: Particular requirements - Input devices - Occupancy sensor | |
| Digital addressable lighting interface \x96 Part 304: Particular requirements - Input devices - Light sensor | |
| Digital addressable lighting interface Part 101: General requirements - System components | |
| Digital addressable lighting interface Part 101: General requirements - System | |
| Digital addressable lighting interface Part 102: General requirements - Control gear | |
| Digital addressable lighting interface Part 103: General requirements - Control devices | |
| Digital addressable lighting interface Part 201: Particular requirements for control gear - Fluorescent lamps (device type 0) | |
| Digital addressable lighting interface Part 202: Particular requirements for control gears - Self-contained emergency lighting (device type 1) | |
| Digital addressable lighting interface Part 203: Particular requirements for control gears - Discharge lamps (excluding fluorescent lamps) (device type 2) | |
| Digital addressable lighting interface Part 204: Particular requirements for control gears - Low voltage halogen lamps (device type 3) | |
| Digital addressable lighting interface Part 206: Particular requirements for control gears - Conversion from digital signal into d. c. voltage (device type 5) | |
| Digital addressable lighting interface Part 207: Particular requirements for control gears - LED modules (device type 6) | |
| Digital addressable lighting Interface Part 208: Particular requirements for control gear - Switching function (device type 7) | |
| Digital addressable lighting interface Part 209: Particular requirements for control gear - Colour control (device type 8) | |
| Digital addressable lighting interface Part 210: Particular requirements for control gear - Sequencer (device type 9) | |
| Digital addressable lighting interface Part 301: Particular requirements - Input devices - Push buttons | |
| Digital addressable lighting interface Part 302: Particular requirements - Input devices - Absolute input devices | |
| Digital addressable lighting interface Part 303: Particular requirements - Input devices - Occupancy sensor | |
| Digital addressable lighting interface Part 304: Particular requirements - Input devices - Light sensor | |
| Digital audio - Digital input-output interfacing - Transmission of digital audio over asynchronous transfer mode (ATM) networks | |
| Digital living network alliance (DLNA) home networked device interoperability guidelines Part 1: Architecture and protocols | |
| Digital living network alliance (DLNA) home networked device interoperability guidelines Part 2: DLNA media formats | |
| Digital living network alliance (DLNA) home networked device interoperability guidelines Part 3: Link protection | |
| Digital living network alliance (DLNA) home networked device interoperability guidelines Part 4: DRM interoperability solutions | |
| Digital living network alliance (DLNA) home networked device interoperability guidelines Part 5 -1: DLNA Device Profile guidelines | |
| Digital radio mondiale (DRM) Part 2: Digital radio in the bands below 30 MHz - Methods of measurement for DRM transmitters | |
| Digital terrestrial television receivers for the DVB-T system | |
| Digital video recording with video compression 12,65 mm type D-9 component format 525/60 and 625/50 (digital S) | |
| Dimensions of half pot-cores made of ferrite for inductive proximity switches | |
| DTV profiles for uncompressed digital video interfaces - Part 1: General | |
| Dynamic modules - Performance specification templates Part 3-1: Dynamic channel equalizers | |
| Dynamic modules - Performance specification templates Part 3-3: Wavelength selective switches | |
| Dynamic modules and devices - General and guidance | |
| Dynamic modules Part 1-2: Performance standards - Dynamic chromatic dispersion compensator with pigtails for use in controlled environments (Category C) | |
| Dynamic modules Part 1-3: Performance standards - Dynamic gain tilt equalizer (nonconnectorized) | |
| Dynamic modules Part 1: Performance standards - General conditions | |
| Dynamic modules Part 2: Reliability qualification | |
| Dynamic modules Part 3-2: Performance specification templates - Optical channel monitor | |
| Dynamic modules Part 4-1: Software and hardware interface standards - 1 x 9 wavelength selective switch | |
| Dynamic modules Part 5-1: Test methods - Dynamic gain tilt equalizer - Gain tilt settling time measurement | |
| Electric cables - Spark-test method | |
| Electrical and instrumentation loop check | |
| Electrical resistance trace heating systems for industrial and commercial applications Part 1: General and testing requirements | |
| Electrical resistance trace heating systems for industrial and commercial applications Part 2: Application guide for system design, installation and maintenance | |
| Electroacoustics - Audio-frequency induction loop systems for assisted hearing Part 1: Methods of measuring and specifying the performance of system components | |
| Electroacoustics - Audio-frequency induction loop systems for assisted hearing Part 2: Methods of calculating and measuring the low-frequency magnetic field emissions from the loop for assessing conformity with guidelines on... | |
| Electronic components - Long-term storage of electronic semiconductor devices Part 1: General | |
| Electronic components - Long-term storage of electronic semiconductor devices Part 2: Deterioration mechanisms | |
| Electronic components - Long-term storage of electronic semiconductor devices Part 5: Die and wafer device | |
| Electronics assembly technology - Electronic modules | |
| Electrotechnical products - Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers) | |
| EMC IC modelling Part 2: Models of Integrated Circuits for EMI behavioural simulation Conducted Emissions modelling (ICEM-CE) | |
| EMC IC modelling Part 3: Models of Integrated Circuits for EMI behavioural simulation - Radiated emissions modelling (ICEM-RE) | |
| EMC IC modelling Part 4: Models of integrated circuits for RF immunity behavioural simulation - Conducted immunity modelling (ICIM-CI) | |
| Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements | |
| Energia elettrica - Componenti modali nei sistemi trifase in corrente alternata - Grandezze e loro trasformazioni | |
| Energy performance of lamp controlgear Part 1: Controlgear for fluorescent lamps - Method of measurement to dertermine the total input power of controlgear circuits and the efficiency of the controlgear... | |
| Energy performance of lamp controlgear Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear... | |
| Energy performance of lamp controlgear Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of the controlgear | |
| Energy performance of lamp controlgear Part 3: Controlgear for halogen lamps and LED modules - Method of measurement to determine the efficiency of the controlgear | |
| Enterprise system integration Part 1: Models and terminology | |
| Enterprise system integration Part 5: Business to manufacturing transactions | |
| Enterprise-control system integration - Part 3: Activity management - models - of - manufacturing - operations | |
| Enterprise-control system integration Part 2: Object models and attributes for enterprise-control system integration | |
| Enterprise-control system integration Part 4: Object model attributes for manufacturing operations management integration | |
| Environmentally conscious design for electrical and electronic products | |
| Equipment reliability - Reliability assessment methods | |
| ESL measuring method - Part 1: Capacitors with lead terminal for use in electronic equipment | |
| ESL measuring method - Part 2: Surface mount capacitors for use in electronic equipment | |
| Evaluation of human exposure to electromagnetic fields from short range devices (SRDs) in various applications over the frequency range 0 GHz to 300 GHz Part 1: Fields produced by devices... | |
| Exposure to electric or magnetic fields in the low and intermediate frequency range - Methods for calculating the current density and internal electric field induced in the human body -... | |
| Exposure to electric or magnetic fields in the low and intermediate frequency range - Methods for calculating the current density and internal electric field induced in the human body Part... | |
| Ferrite cores - Dimensions Part 11: EC-cores for use in power supply applications | |
| Ferrite cores - Dimensions Part 12: Ring cores | |
| Ferrite cores - Dimensions Part 13: PQ-cores for use in power supply applications | |
| Ferrite cores - Dimensions Part 14: EFD-cores for use in power supply applications | |
| Ferrite cores - Dimensions Part 1: General specification | |
| Ferrite cores - Dimensions Part 2: Pot-cores for use in telecommunications, power supply, and filter applications | |
| Ferrite cores - Dimensions Part 4: RM-cores and associated parts | |
| Ferrite cores - Dimensions Part 5: EP-cores and associated parts for use in inductors and transformers | |
| Ferrite cores - Dimensions Part 6: ETD-cores for use in power supplies | |
| Ferrite cores - Dimensions Part 7: EER-cores | |
| Ferrite cores - Dimensions Part 8: E-cores | |
| Ferrite cores - Dimensions Part 9: Planar cores | |
| Ferrite cores - Standard inductance factor for gapped cores and its tolerance | |
| Fiber optic active components and devices - Package and interface standards Part 17: Transmitter and receiver components with dual coaxial RF connectors | |
| Fiber optic active components and devices - Package and interface standards Part 18: 40-Gbit/s serial transmitter and receiver components for use with the LC connector interface | |
| Fibre optic active components and devices - Package and interface standards \x96 Part 12: Laser transmitters with a coaxial RF connector | |
| Fibre optic active components and devices - Package and interface standards \x96 Part 2: SFF 10-pin transceivers | |
| Fibre optic active components and devices - Package and interface standards Part 11: 14-pin active device modules | |
| Fibre optic active components and devices - Package and interface standards Part 12: Laser transmitters with coaxial RF connector | |
| Fibre optic active components and devices - Package and interface standards Part 15: Discrete vertical cavity surface emitting laser packages | |
| Fibre optic active components and devices - Package and interface standards Part 16: Transmitter and receiver components for use with LC connector interface | |
| Fibre optic active components and devices - Package and interface standards Part 2: SFF 10-pin transceivers | |
| Fibre optic active components and devices - Package and interface standards Part 3: SFF 20-pin transceivers | |
| Fibre optic active components and devices - Package and interface standards Part 7: SFF LC 10-pin transceivers | |
| Fibre optic active components and devices - Package and interface standards Part 9: SFF MU duplex 10-pin transceivers | |
| Fibre optic active components and devices - Performance standard Part 8: Seeded reflective semiconductor optical amplifier devices | |
| Fibre optic active components and devices - Performance standards - Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application | |
| Fibre optic active components and devices - Performance standards Part 1: General and guidance | |
| Fibre optic active components and devices - Performance standards Part 2: 850 nm discrete vertical cavity surface emitting laser devices | |
| Fibre optic active components and devices - Performance standards Part 3: Modulator-integrated laser diode transmitters for 2,5-Gbit/s to 40- Gbit/s fibre optic transmission systems | |
| Fibre optic active components and devices - Performance standards Part 5: ATM-PON transceivers with LD driver and CDR ICs | |
| Fibre optic active components and devices - Performance standards Part 7: 1 310 nm discrete vertical cavity surface emitting laser devices | |
| Fibre optic active components and devices - Performance standards Part 9: Seeded reflective semiconductor optical amplifier transceivers | |
| Fibre optic active components and devices - Test and measurement procedures - Part 1: General and guidance | |
| Fibre optic active components and devices - Test and measurement procedures Part 2: ATM-PON transceivers | |
| Fibre optic active components and devices - Test and measurement procedures Part 3: Optical power variation induced by mechanical disturbance in optical receptacles and transceiver interfaces | |
| Fibre optic active components and devices - Test and measurement procedures Part 4: Relative intensity noise using a time-domain optical detection system | |
| Fibre optic active components and devices - Test and measurement procedures Part 5: Wavelength channel tuning time of tuneable transmitters | |
| Field device tool (FDT) interface specification - Part 2: Concepts and detailed description | |
| Field device tool (FDT) interface specification - Part 301: Communication profile integration - IEC 61784 CPF 1 | |
| Field device tool (FDT) interface specification - Part 302: Communication profile integration - IEC 61784 CPF 2 | |
| Field device tool (FDT) interface specification - Part 306: Communication profile integration - IEC 61784 CPF 6 | |
| Field device tool (FDT) interface specification - Part 309: Communication profile integration - IEC 61784 CPF 9 | |
| Field device tool (FDT) interface specification - Part 315: Communication profile integration - IEC 61784 CPF 15 | |
| Field device tool (FDT) interface specification Part 1: Overview and guidance | |
| Field device tool (FDT) interface specification Part 301: Communication profile integration - IEC 61784 CPF 1 | |
| Field device tool (FDT) interface specification Part 303-1: Communication profile integration - IEC 61784 CP 3/1 and CP 3/2 | |
| Field device tool (FDT) interface specification Part 303-2: Communication profile integration - IEC 61784 CP 3/4, CP 3/5 and CP 3/6 | |
| Field device tool (FDT) interface specification Part 303-2: Communication profile integration - IEC 61784 CP 3/4, CP 3/5 and CP3/6 | |
| Field device tool (FDT) interface specification Part 315: Communication profile integration - IEC 61784 CPF 15 | |
| Fixed electric double-layer capacitors for use in electric and electronic equipment Part 1: Generic specification | |
| Fixed electric double-layer capacitors for use in electronic equipment - Part 1: Generic specification | |
| Fixed electric double-layer capacitors for use in electronic equipment - Part 2: Sectional specification capacitors for power application - - - Electric - double-layer | |
| Fixed electric double-layer capacitors for use in electronic equipment Part 2-1: Blank detail specification - Electric-double layer capacitors for power application - Assessment level EZ | |
| Fluorescent induction lamps - Safety specifications | |
| Framework for energy market communications Part 301: Common Information Model (CIM) extensions for markets | |
| Framework for energy market communications Part 351: CIM European market model exchange profile | |
| Framework for energy market communications Part 450: Profile and context modelling rules | |
| Framework for energy market communications Part 451-1: Acknowledgement business process and contextual model for CIM European market | |
| Framework for energy market communications Part 451-2: Scheduling business process and contextual models for European market | |
| Framework for energy market communications Part 451-3: Transmission capacity allocation business process (explicit or implicit auction) and contextual models for European market | |
| Framework for energy market communications Part 451-4: Settlement and reconciliation business process, contextual and assembly models for European market | |
| Framework for energy market communications Part 451-5: Problem statement and status request business processes, contextual and assembly models for European market | |
| Framework for energy market communications Part 451-6: Publication of information on market, contextual and assembly models for European style market | |
| Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety | |
| Fuel cell technologies - Part 3-2: Stationary fuel cell power systems - Performance test methods | |
| Fuel cell technologies Part 2: Fuel cell modules | |
| Fuel cell technologies Part 3-100: Stationary fuel cell power systems - Safety | |
| Fuel cell technologies Part 3-200: Stationary fuel cell power systems - Performance test methods | |
| Fuel cell technologies Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems | |
| Fuel cell technologies Part 3-300: Stationary fuel cell power systems - Installation | |
| Fuel cell technologies Part 4-102: Fuel cell power systems for industrial electric trucks - Performance test methods | |
| Fuel cell technologies Part 5-1: Portable fuel cell power systems - Safety | |
| Fuel cell technologies Part 6-100: Micro fuel cell power system - Safety | |
| Fuel cell technologies Part 6-100: Micro fuel cell power systems - Safety | |
| Fuel cell technologies Part 6-200: Micro fuel cell power systems - Performance test methods | |
| Fuel cell technologies Part 6-300: Micro fuel cell power systems - Fuel cartridge interchangeability | |
| General lighting - Light emitting diode (LED) products and related equipment - Terms and definitions | |
| Grading capacitors for high-voltage alternating current circuit-breakers Part 1: General | |
| Grid connected PV systems - Minimum requirements for system documentation, commissioning tests and inspection | |
| Guidance on human aspects of dependability | |
| Guidance on system dependability specifications | |
| Heat shrinkable moulded shapes - Part 1: Definitions and general requirements | |
| Heat shrinkable moulded shapes - Part 2: Methods of test | |
| Heat-shrinkable moulded shapes Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance Sheet 100: Heat-shrinkable moulded shape dimensions | |
| Heat-shrinkable moulded shapes Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance Sheet 101: Heat-shrinkable moulded shapes, polyolefin, semi-rigid, limited fire hazard, material requirements and system per... | |
| Heat-shrinkable moulded shapes Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance Sheet 102: Heat-shrinkable elastomeric moulded shapes, semi-rigid, material requirements and system performance | |
| Helical-scan digital video cassette recording system using 12,65 mm (0,5 in) magnetic tape - Format HD-D5 Part 1: VTR specifications | |
| Helical-scan digital video cassette recording system using 12,65 mm (0,5 in) magnetic tape - Format HD-D5 Part 2: Compression format | |
| Helical-scan digital video cassette recording system using 12,65 mm (0,5 in) magnetic tape - Format HD-D5 Part 3: Data stream format | |
| High availability automation networks | |
| High density recording format on CD-R/RW disc system - HD-BURN format | |
| High voltage switchgear and controlgear Part 3: Digital interfaces based on IEC 61850 | |
| High-current test techniques Definitions and requirements for test currents and measuring systems | |
| High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earthing switches | |
| High-voltage switchgear and controlgear - Part 102: High-voltage alternating current disconnectors and earthing switches | |
| High-voltage switchgear and controlgear - Part 104: Alternating current switches for rated voltages of 52 kV and above | |
| High-voltage switchgear and controlgear - Part 108: High-voltage alternating current disconnecting circuit-breakers for rated voltages of 72,5 kV and above | |
| High-voltage switchgear and controlgear - Part 109: Alternating current series capacitor by-pass switches | |
| High-voltage switchgear and controlgear - Part 201: AC insulation-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV | |
| High-voltage switchgear and controlgear - Part 202: High voltage/low voltage prefabricated substation | |
| High-voltage switchgear and controlgear Part 100: Alternating-current circuit-breakers | |
| High-voltage switchgear and controlgear Part 100: Alternatingcurrent circuit-breakers | |
| High-voltage switchgear and controlgear Part 101: Synthetic testing | |
| High-voltage switchgear and controlgear Part 102: Alternating current disconnectors and earthing switches | |
| High-voltage switchgear and controlgear Part 103: Switches for rated voltages above 1 kV up to and including 52 kV | |
| High-voltage switchgear and controlgear Part 105: Alternating current switch-fuse combinations for rated voltages above 1 kV up to and including 52 kV | |
| High-voltage switchgear and controlgear Part 106: Alternating current contactors, contactor-based controllers and motor-starters | |
| High-voltage switchgear and controlgear Part 107: Alternating current fused circuit-switchers for rated voltages above 1 kV up to and including 52 kV | |
| High-voltage switchgear and controlgear Part 109: Alternating-current series capacitor by-pass switches | |
| High-voltage switchgear and controlgear Part 110: Inductive load switching | |
| High-voltage switchgear and controlgear Part 112: Alternating current high-speed earthing switches for secondary arc extinction on transmission lines | |
| High-voltage switchgear and controlgear Part 1: Common specifications for alternating current switchgear and controlgear | |
| High-voltage switchgear and controlgear Part 200: A.C. metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV | |
| High-voltage switchgear and controlgear Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV | |
| High-voltage switchgear and controlgear Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV | |
| High-voltage switchgear and controlgear Part 204: Rigid gas-insulated transmission lines for rated voltages above 52 kV | |
| High-voltage switchgear and controlgear Part 205: Compact switchgear assemblies for rated voltages above 52 kV | |
| High-voltage switchgear and controlgear Part 206: Voltage presence indicating systems for rated voltages above 1 kV and up to and including 52 kV | |
| High-voltage switchgear and controlgear Part 207: Seismic qualification for gas-insulated switchgear assemblies for rated voltages above 52 kV | |
| High-voltage switchgear and controlgear Part 209: Cable connections for gas-insulated metal-enclosed switchgear for rated voltages above 52 kV - Fluid-filled and extruded insulation cables - Fluid-filled and dry-type cableterminations | |
| High-voltage switchgear and controlgear Part 211: Direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages above 52 kV | |
| High-voltage switchgear and controlgear Part 212: Compact Equipment Assembly for Distribution Substation (CEADS) | |
| High-voltage switchgear and controlgear Part 4: Handling procedures for sulphur hexafluoride (SF6) and its mixtures | |
| Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V | |
| Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures - Part 1: Procedure to determine the specific absorption rate (SAR)... | |
| Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures Part 2: Procedure to determine the specific absorption rate (SAR) for... | |
| Hydraulic machines - Guide for dealing with hydro-abrasive erosion in Kaplan, Francis and Pelton turbines | |
| Hydraulic turbines, storage pumps and pump-turbines - Rehabilitation and performance improvement | |
| Hydroelectric power plant automation - Guide for computer-based control | |
| ID format for 50 mm magneto-optical disc system | |
| Identification systems enabling unambiguous information interchange Requirements Part 1: Principles and methods | |
| Inductive components - Reliability management | |
| Industrial communication networks - High availability automation networks - Part 1: General concepts and calculation methods (including RSTP) | |
| Industrial communication networks - High availability automation networks - Part 2: Media Redundancy Protocol (MRP) | |
| Industrial communication networks - High availability automation networks - Part 4: Cross-network Redundancy Protocol (CRP) | |
| Industrial communication networks - High availability automation networks - Part 5: Beacon Redundancy Protocol (BRP) | |
| Industrial communication networks - High availability automation networks - Part 6: Distributed Redundancy Protocol (DRP) | |
| Industrial communication networks - High availability automation networks Part 1: General concepts and calculation methods | |
| Industrial communication networks - High availability automation networks Part 2: Media Redundancy Protocol (MRP) | |
| Industrial communication networks - High availability automation networks Part 4: Cross-network Redundancy Protocol (CRP) | |
| Industrial communication networks - High availability automation networks Part 7: Ring-based Redundancy Protocol (RRP) | |
| Industrial systems, installations and equipment and industrial products Labelling of cables and cores | |
| Insulating liquids - Test method for detection of potentially corrosive sulphur in used and unused insulating oil | |
| Insulators - Glossary of terms and definitions | |
| Integrated circuits - EMC Evaluation of transceivers Part 2: LIN transceivers | |
| Integrated circuits - Measurement of impulse immunity Part 3: Non-synchronous transient injection method | |
| Interface for loudspeakers with digital input signals based on IEC 60958 | |
| Internet protocol (IP) and transport stream (TS) based service access | |
| Live working - Insulating hoses with fittings for use with hydraulic tools and equipment | |
| Live working - Insulating ropes | |
| Live working - Telescopic sticks and telescopic measuring sticks | |
| Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters | |
| Magnetic resonance equipment for medical imaging - Part 2: Classification criteria for pulse sequences | |
| Managing risk in projects - Application guidelines | |
| Maritime navigation and radiocommunication equipment and systems - Automatic identification systems (AIS) Part 3: Repeater station - Minimum operational and performance requirements - Methods of test and required test results... | |
| Maritime navigation and radiocommunication equipment and systems - Class B shipborne equipment of the automatic identification system (AIS) Part 1: Carrier-sense time division multiple access (CSTDMA) techniques | |
| Maritime navigation and radiocommunication equipment and systems - Class B shipborne equipment of the Automatic Identification System (AIS) Part 2: Self-organising time division multiple access (SOTDMA) techniques | |
| Maritime navigation and radiocommunication equipment and systems - Electronic chart system (ECS) - Operational and performance requirements, methods of testing and required test results | |
| Maritime navigation and radiocommunication equipment and systems - Shipborne radar - Performance requirements, methods of testing and required test results | |
| Maritime navigation and radiocommunication equipment and systems Automatic identification system (AIS) Part 2: AIS AtoN stations - Operational and performance requirements, methods of testing and required test results | |
| Maritime navigation and radiocommunication equipment and systems Automatic Identification Systems (AIS) Part 1: AIS Base Stations - Minimum operational and performance requirements, methods of testing and required test results | |
| Maritime navigation and radiocommunication equipment and systems Presentation of navigation-related information on shipborne navigational displays General requirements, methods of testing and required test results | |
| Maritime navigation and radiocommunication equipment and systems Radar for craft not in compliance with IMO SOLAS Chapter V Performance requirements, methods of test and required test results | |
| Material declaration for products of and for the electrotechnical industry | |
| Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure | |
| Medical device software - Software life-cycle processes | |
| Medical devices - Application of usability engineering to medical devices | |
| Medical devices Part 1: Application of usability engineering to medical devices | |
| Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1: Determination of the detective quantum efficiency | |
| Medical electrical equipment - Characteristics of digital X-ray imaging devices Part 1-2: Determination of the detective quantum efficiency Detectors used in mammography | |
| Medical electrical equipment - Characteristics of digital X-ray imaging devices Part 1: Determination of the detective quantum efficiency - Detectors used in dynamic imaging | |
| Medical electrical equipment - Characteristics of digital x-ray imaging devices Part 1: Determination of the detective quantum efficiency - Detectors used in radiographic imaging | |
| Medical electrical equipment - Dosimetric instruments as used in brachytherapy Part 1: Instruments based on well-type ionization chambers | |
| Medical electrical equipment - Exposure index of digital X-ray imaging systems Part 1: Definition and requirements for general radiography | |
| Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment | |
| Medical electrical equipment - Safety of radiotherapy record and verify systems | |
| Metallic cables and other passive components test methods - Part 4-16: Electromagnetic compatibility (EMC) - Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies... | |
| Metallic cables and other passive components test methods Part 4-16: Electromagnetic compatibility (EMC) - Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for... | |
| Metallic communication cable test methods - Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring the transfer impedance and the screening - or the coupling attenuation - Tube in... | |
| Metallic communication cable test methods Part 4-2: Electromagnetic compatibility (EMC) - Screening and coupling attenuation - Injection clamp method | |
| Metallic communication cable test methods Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring of transfer impedance ZT and screening attenuation as or coupling attenuation aC of connectors and... | |
| Metallic communication cables test methods Part 1-1: Electrical - Measurement of the pulse/step return loss in the frequency domain using the Inverse Discrete Fourier Transformation (IDFT) | |
| Method of evaluating the thermal performance of enclosures | |
| Methods for product accelerated testing | |
| Methods of measurement for DVD players | |
| Methods of measurement for radio transmitters Part 1: Performance characteristics of terrestrial digital television transmitters | |
| Modular component interfaces for surface-mount fluid distribution components - Part 1: Elastomeric seals | |
| Multimedia gateway in home networks - Guidelines | |
| Multimedia home network - Network interfaces for network adapter | |
| Multimedia home networks - Home network communication protocol over IP for multimedia household appliances | |
| Multimedia home server systems - Digital rights permission code | |
| Multimedia home server systems - Interchangeable volume/file structure adaptation for broadcasting receivers Part 1: General description and architecture | |
| Multimedia home server systems - Interchangeable volume/file structure adaptation for broadcasting receivers Part 2: General recording structure | |
| Multimedia quality - Method of assessment of synchronization of audio and video | |
| Multimedia systems - Common communication protocol for inter-connectivity on heterogeneous networks | |
| Multimedia systems and equipment - Multimedia e-publishing and e-books - Generic format for e-publishing | |
| Multimedia systems and equipment - Multimedia e-publishing and e-books - Reader's format for e-publishing | |
| Noise suppression sheet for digital devices and equipment - Part 3: Characterization of parameters of noise suppression sheet | |
| Noise suppression sheet for digital devices and equipment Part 1: Definitions and general properties | |
| Noise suppression sheet for digital devices and equipment Part 2: Measuring methods | |
| Nuclear power plants - Instrumentation and control systems important to safety - Requirements for coping with Common Cause Failure (CCF) | |
| Nuclear power plants - Main control room - Alarm functions and presentation | |
| Obsolescence management - Application guide | |
| OPC unified architecture Part 100: Device Interface | |
| OPC unified architecture Part 10: Programs | |
| OPC unified architecture Part 11: Historical Access | |
| OPC unified architecture Part 13: Aggregates | |
| OPC unified architecture Part 3: Address Space Model | |
| Optical circuit boards - Basic test and measurement procedures Part 2-1: Measurements - Optical attenuation and isolation | |
| Optical circuit boards - Basic test and measurement procedures Part 2-4: Optical transmission test for optical circuit boards without input/output fibres | |
| Optical circuit boards - Basic test and measurement procedures Part 2: General guidance for definition of measurement conditions for optical characteristics of optical circuit boards | |
| Optical circuit boards - Performance standard Part 3-1: Flexible optical circuit boards using unconnectorized optical glass fibres | |
| Optical circuit boards Part 1: General | |
| Optical circuit boards Part 2-2: Measurements - Dimensions of optical circuit boards | |
| Optical circuit boards Part 3: Performance standards - General and guidance | |
| Optical circuit boards Part 4: Interface standards - General and guidance | |
| Organic light emitting diode (OLED) displays Part 1-1: Generic specifications | |
| Organic Light Emitting Diode (OLED) displays Part 5-2: Mechanical endurance test methods | |
| Organic Light Emitting Diode (OLED) displays Part 5-3: Measuring methods of image sticking and lifetime | |
| Organic light emitting diode (OLED) displays Part 5: Environmental testing methods | |
| Organic Light Emitting Diode (OLED) displays Part 6-1: Measuring methods of optical and electro-optical parameters | |
| Organic light emitting diode (OLED) displays Part 6-2: Measuring methods of visual quality and ambient performance | |
| Organic light emitting diode (OLED) displays Part 6-3: Measuring methods of image quality | |
| Organic light emitting diode displays Part 1-2: Terminology and letter symbols | |
| Overhead electrical conductors - Formed wire, concentric lay, stranded conductors | |
| Photobiological safety of lamps and lamp systems Part 5: Image projectors | |
| Photobiological safety of lamps and lamp systems | |
| Photovoltaic (PV) systems - Requirements for testing, documentation and maintenance Part 1: Grid connected system - Documentation, commissioning tests and inspetion | |
| Photovoltaic (PV) systems - Requirements for testing, documentation and maintenance Part 1: Grid connected systems - Documentation, commissioning tests and inspection | |
| Photovoltaic pumping systems - Design qualification and performance measurements | |
| Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles Part 1: General requirements | |
| Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories | |
| Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers | |
| Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria | |
| Polymeric thermistors - Directly heated positive step function temperature coefficient Part 1-1: Blank detail specification - Current limiting application | |
| Polymeric thermistors - Directly heated positive step function temperature coefficient Part 1: Generic specification | |
| Power line communication systems for power utility applications Part 1: Planning of analogue and digital power line carrier systems operating over EHV/HV/MV electricity grids | |
| Power line communication systems for power utility applications Part 2: Analogue power line carrier terminals or APLC | |
| Power systems management and associated information exchange - Data and communications security Part 11: Security for XML files | |
| Power systems management and associated information exchange - Data and communications security Part 3: Communication network and system security - Profiles including TCP/IP | |
| Power systems management and associated information exchange - Data and communications security Part 7: Network and System Management (NSM) data object models | |
| Power systems management and associated information exchange - Data and communications security Part 9: Cyber security key management for power system equipment | |
| Power systems management and associated information exchange - Interoperability in the long term Part 2: End-to-end quality codes for SCADA | |
| Power systems managment and associated information exchange - Interoperability in the long term Part 100: CIM profiles to XML schema mapping | |
| Printed boards - Part 1: Generic specification | |
| Printed boards Part 20: Printed circuit boards for high-brightness LEDs | |
| Protection against lightning Part 1: General principles | |
| Protection against lightning Part 2: Risk management | |
| Protection against lightning Part 3: Physical damage to structures and life hazard | |
| Protection against lightning Part 4: Electrical and electronic systems and structures | |
| Protection against lightning Part 4: Electrical and electronic systems within structures | |
| Protection against ligthning Part 3: Physical damage to structures and life hazard | |
| Radiation protection instrumentation - Hand-held instruments for the detection and identification of radionuclides and for the indication of ambient dose equivalent rate from photon radiation | |
| Radiation protection instrumentation - Highly sensitive hand-held instruments for neutron detection of radioactive material | |
| Radiation protection instrumentation - Highly sensitive hand-held instruments for photon detection of radioactive material | |
| Radiation protection instrumentation - Installed radiation monitors for the detection of radioactive and special nuclear materials at national borders | |
| Radiation protection instrumentation - Passive integrating dosimetry systems for environmental and personal monitoring Part 1: General characteristics and performance requirements | |
| Radiation protection instrumentation - Passive integrating dosimetry systems for individual, workplace and environmental monitoring of photon and beta radiation | |
| Radiation protection instrumentation - Portable photon contamination meters and monitors | |
| Radiation protection instrumentation - Spectroscopy-based portal monitors used for the detection and identification of illicit trafficking of radioactive material | |
| Railway applications - Automated urban guided transport (AUGT) - Safety requirements | |
| Railway applications - Electric traction - Short-primary type linear induction motors (LIM) fed by power converters | |
| Railway applications - Urban guided transport management and command/control systems Part 1: System principles and fundamental concepts | |
| Railway applications - Urban guided transport management and command/control systems Part 2: Functional requirements specification | |
| Reed contact units - Part 2: Heavy-duty reed switches | |
| Reed switches Part 1-1: Generic specification - Quality assessment | |
| Reed switches Part 1: Generic specification | |
| Reflectivity of electromagnetic wave absorbers in millimetre wave frequency - Measurement methods | |
| Reliability growth - Stress testing for early failures in unique complex systems | |
| Representation of process control engineering - Requests in P&I diagrams and data exchange between P&ID tools and PCE-CAE tools | |
| Reti di comunicazione industriale - Reti per l'automazione ad alta disponibilit\xe0 Parte 3: Protocollo con ridondanza parallela (PRP) e anelli ad alta disponibilit\xe0 senza interruzioni (HSR) | |
| Safety of primary and secondary lithium cells and batteries during transport | |
| Safety requirements for power electronic converter systems and equipment Part 1: General | |
| Safety requirements for secondary batteries and battery installations Part 3: Traction batteries | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Nickel-cadmium prismatic secondary single cells with partial gas recombination | |
| Semiconductor devices - Constant current electromigration test | |
| Semiconductor devices - Hot carrier test on MOS transistors | |
| Semiconductor devices - Metallization stress void test | |
| Semiconductor devices - Mobile ion tests for metal-oxide semiconductor field effect transistors (MOSFETs) | |
| Semiconductor devices - Semiconductor die products Part 1: Procurement and use | |
| Semiconductor devices - Time Dependent Dielectric Breakdown (TDDB) test for gate dielectric films | |
| Semiconductor devices Part 1: Time-dependent dielectric breakdown (TDDB) test for inter-metal layers | |
| Semiconductor die products - Part 5: Requirements for information concerning electrical simulation | |
| Semiconductor die products Part 2: Exchange data formats | |
| Semiconductor die products Part 6: Requirements for information concerning thermal simulation | |
| Service diagnostic interface for consumer electronics products and networks - Implementation for echonet | |
| Service diagnostic interface for consumer electronics products and networks - Implementation for IEEE 1394 | |
| Single crystal wafers for surface acoustic wave (SAW) devices applications - Specifications and measuring method | |
| Solid-state relays | |
| Sound system equipment - Electroacoustic transducers - Measurement of large signal parameters | |
| Sound system equipment - Electroacoustic transducers - Measurement of suspension parts | |
| Static Transfer Systems (STS) - Part 1: General and safety requirements | |
| Static Transfer Systems (STS) - Part 2: Electromagnetic compatibility (EMC) requirements | |
| Static transfer systems (STS) - Part 3: Method for specifying performance and test requirements | |
| Television METADATA - Part 2: Data encoding protocol using key-length-value | |
| Television METADATA Part 1: Metadata dictionary structure | |
| Teleweb application - Part 1: General description | |
| Teleweb application - Part 2: Delivery methods | |
| Teleweb application - Part 3: Superteletext profile | |
| TeleWeb application Part 4: Hyperteletext profile | |
| Temperature - Electromotive force (EMF) tables for pure-element thermocouple combinations | |
| Terrestrial digital multimedia broadcasting (T-DMB) receivers Part 1: Basic requirement | |
| Terrestrial digital multimedia broadcasting (T-DMB) receivers Part 2: Interactive data services using BIFS | |
| Terrestrial digital multimedia broadcasting (T-DMB) receivers Part 3: Common API | |
| Triggering messages for broadcast applications - Part 1: Format | |
| Triggering messages for broadcast applications - Part 2: Transport methods | |
| Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses | |
| Ultrasonics - Field characterization - Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic fields | |
| Video recording - 12,65 mm TYPE D-11 format Part 1: Tape recording | |
| Video recording - 12,65 mm type D-11 format Part 2: Picture compression and data stream | |
| Video recording - 12,65 mm type D-11 format Part 3: Data mapping over SDTI | |
| Video recording - Helical-scan digital video cassette recording format using 12,65 mm magnetic tape and incorporating MPEG-2 compression - Format D-10 | |
| Video systems (625/50 progressive) - Video and accompanied data using the vertical blanking interval - Analogue interface | |
| Voltage sourced converter (VSC) valves for high-voltage direct curent (HVDC) power transmission - Electrical testing | |
| Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing |
| << Prev | Next >> |