Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
450
500
550
600
650
700
730
740
750
760
770
780
788
789
790
791
792
793
794
795
796
797
798
799
800
810
820
830
840
850
860
900
950
1000
1050
1100
1150
1500
1620
| Product Name | Notes |
|---|---|
| Alarm and electronic security systems Part 11-33: Electronic access control systems - Access control configuration based on Web services | |
| Alarm and electronic security systems Part 11-5: Electronic access control systems - Open Supervised Device Protocol (OSDP) | |
| Arc welding equipment \x96 Part 1: Welding power sources | |
| Arc welding equipment \x96 Part 4: Periodic inspection and testing | |
| Arc welding equipment Part 10: Electromagnetic compatibility (EMC) requirements | |
| Arc welding equipment Part 11: Electrode holders | |
| Arc welding equipment Part 13: Welding current return clamp | |
| Arc welding equipment Part 14: Calibration, validation and consistency testing | |
| Arc welding equipment Part 1: Welding power sources | |
| Arc welding equipment Part 2: Liquid cooling systems | |
| Arc welding equipment Part 3: Arc striking and stabilizing devices | |
| Arc welding equipment Part 5: Wire feeders | |
| Arc welding equipment Part 7: Torches | |
| Arc welding equipment Part 8: Gas consoles for welding and plasma cutting systems | |
| Arc welding equipment Part 9: Installation and use | |
| Attachment materials for electronic assembly Part 1-3: Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solder for electronic soldering applications | |
| Cable trunking systems and cable ducting systems for electrical installations \x96 Part 1: General requirements | |
| Cable trunking systems and cable ducting systems for electrical installations \x96 Part 2-1: Particular requirements - Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings... | |
| Cable trunking systems and cable ducting systems for electrical installations \x96 Part 2-2: Particular requirements - Cable trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor... | |
| Cable trunking systems and cable ducting systems for electrical installations \x96 Part 2-3: Particular requirements - Slotted cable trunking systems intended for installation in cabinets | |
| Cable trunking systems and cable ducting systems for electrical installations \x96 Part 2-4: Particular requirements - Service poles and service posts | |
| Calibration of fibre-optic power meters | |
| Capacitors for power electronics | |
| Circuit boards and circuit board assemblies - Design and use \x96 Part 6-3: Land pattern design - Description of land pattern for through hole components (THT) | |
| Circuit boards and circuit board assemblies - Design and use Part 6-1: Land pattern design - Generic requirements for land pattern on circuit boards | |
| Circuit boards and circuit board assemblies - Design and use Part 6-2: Land pattern design - Description of land pattern for the most common surface mounted components (SMD) | |
| Circuit-breakers for equipment (CBE) | |
| Classification of insulating liquids | |
| Comfort fans and regulators for household and similar purposes - Methods for measuring performance | |
| Compression and mechanical connectors for power cables Part 1-1: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages up to 1 kV (Um =... | |
| Compression and mechanical connectors for power cables Part 1-2: Test methods and requirements for insulation piercing connectors for power cables for rated voltages up to 1 kV (Um = 1,2... | |
| Compression and mechanical connectors for power cables Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (Um = 1,2... | |
| Conduit Systems for cable management \x96 Part 22: Particular requirements - Pliable conduit systems | |
| Conduit systems for cable management Part 21: Particular requirements - Rigid conduit systems | |
| Conduit Systems for cable management Part 22: Particular requirements - Pliable conduit systems | |
| Conduit systems for cable management Part 23: Particular requirements - Flexible conduit systems | |
| Connectors for electrical and electronic equipment - Product requirements - Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial... | |
| Connectors for electrical and electronic equipment - Product requirements \x96 Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking | |
| Connectors for electrical and electronic equipment - Product requirements \x96 Part 2-115: Circular connectors - Detail specification for 12-pole shielded connectors with 2 A rated current and IP65/IP67 metal housing... | |
| Connectors for electrical and electronic equipment - Product requirements Part 2 -116: Detail specification for circular connectors size 15 with up to 3+PE power contacts and auxiliary contacts, with bayonet-locking... | |
| Connectors for electrical and electronic equipment - Product requirements Part 2-010: Circular connectors - Detail specification for connectors with outer or inner push-pull locking mechanism, based on mating interfaces according... | |
| Connectors for electrical and electronic equipment - Product requirements Part 2-011: Circular connectors - Detail specification for B12 bayonet coupling connectors based on mating interfaces according to IEC 61076-2-101 and... | |
| Connectors for electrical and electronic equipment - Product Requirements Part 2-012: Circular connectors - Detail specification for connectors with inner push-pull locking based on M12 connector interfaces according to IEC... | |
| Connectors for electrical and electronic equipment - Product requirements Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking | |
| Connectors for electrical and electronic equipment - Product requirements Part 2-114: Circular connectors - Detail specification for connectors with M8 screw- locking with power contacts and signal contacts for data... | |
| Connectors for electrical and electronic equipment - Product requirements Part 3-119: Rectangular connectors - Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial... | |
| Connectors for electrical and electronic equipment - Product requirements Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500... | |
| Connectors for electrical and electronic equipment - Product requirements Part 3-123: Rectangular connectors - Detail specification for hybrid connectors for industrial environments, for power supply and fibre optic data transmission,... | |
| Connectors for electrical and electronic equipment - Product requirements Part 3-124: Rectangular connectors - Detail specification for 10-way, shielded, free and fixed connectors for I/O and data transmission with frequencies... | |
| Connectors for electrical and electronic equipment - Product requirements Part 3-126: Rectangular connectors - Detail specification for 5-way power connectors for industrial environments with push-pull locking | |
| Connectors for electrical and electronic equipment - Product requirements Part 8-100: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic... | |
| Connectors for electrical and electronic equipment - Product requirements Part 8-101: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic... | |
| Connectors for electrical and electronic equipment - Product requirements Part 8-102: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic... | |
| Controlgear for electric light sources - Safety - Part 2-10: Particular requirements - Electronic controlgear for high-frequency operation of tubular cold-cathode discharge lamps (neon tubes) | |
| Controlgear for electric light sources - Safety \x96 Part 1: General requirements | |
| Controlgear for electric light sources - Safety \x96 Part 2-11: Particular requirements - Miscellaneous electronic circuits used with luminaires | |
| Controlgear for electric light sources - Safety \x96 Part 2-12: Particular requirements - DC or AC supplied electronic controlgear for discharge lamps (excluding fluorescent lamps) | |
| Controlgear for electric light sources - Safety \x96 Part 2-13: Particular requirements - Electronic controlgear for LED light sources | |
| Controlgear for electric light sources - Safety \x96 Part 2-1: Particular requirements - Starting devices (other than glow starters) | |
| Controlgear for electric light sources - Safety \x96 Part 2-2: Particular requirements - Electronic step-down convertors for filament lamps | |
| Controlgear for electric light sources - Safety \x96 Part 2-3: Particular requirements - AC or DC supplied electronic controlgear for fluorescent lamps | |
| Controlgear for electric light sources - Safety \x96 Part 2-8: Particular requirements - Ballasts for fluorescent lamps | |
| Determination of the maximum symmetrical radiation field of X-ray tube assemblies and X-ray source assemblies for medical diagnosis | |
| Digital audio interface Part 1: General | |
| Digital audio interface Part 3: Consumer applications | |
| Digital audio interface Part 5: Consumer application enhancement | |
| Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 3: Circuit-breakers for DC operation | |
| Electrical accessories - Cord sets and interconnection cord sets | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for... | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal... | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC... | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with field bus interfaces... | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial... | |
| Electrical equipment for measurement, control and laboratory use \x96 EMC requirements Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable testing, measuring and monitoring equipment... | |
| Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 12:... | |
| Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 2:... | |
| Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 3:... | |
| Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 4:... | |
| Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 5:... | |
| Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 6:... | |
| Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing measuring or monitoring of protective measures Part 17:... | |
| Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part... | |
| Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures \x96 Part... | |
| Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures Part 11:... | |
| Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures Part 1:... | |
| Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure sound pressure levels in noise certification of aircraft | |
| Electroacoustics - Sound calibrators | |
| Electromagnetic compatibility (EMC) \x96 Part 2-4: Environment - Compatibility levels in power distribution systems in industrial locations for low-frequency conducted disturbances | |
| Electromagnetic compatibility (EMC) \x96 Part 3-2: Limits - Limits for harmonic current emissions (equipment input current = 16 A per phase) | |
| Electromagnetic compatibility (EMC) \x96 Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test | |
| Electromagnetic compatibility (EMC) \x96 Part 4-41: Testing and measurement techniques - Broadband radiated immunity tests | |
| Electromagnetic compatibility (EMC) Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current = 75 A and subject... | |
| Electromagnetic compatibility (EMC) Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <=16 A per phase) | |
| Electromagnetic compatibility (EMC) Part 3-2: Limits - Limits for harmonic current emissions (equipment input current = 16 A per phase) | |
| Electromagnetic compatibility (EMC) Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase... | |
| Electromagnetic compatibility (EMC) Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test | |
| Electromagnetic compatibility (EMC) Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides | |
| Electromagnetic compatibility (EMC) Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test | |
| Electromagnetic compatibility (EMC) Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields | |
| Electromagnetic compatibility (EMC) Part 6-1: Generic Standards - Immunity standard for residential, commercial and light-industrial environments | |
| Electromagnetic compatibility (EMC) Part 6-2: Generic standards - Immunity standard for industrial environments | |
| Electromagnetic compatibility (EMC) Part 6-3: Generic standards - Emission standard for equipment in residential environments | |
| Electromagnetic compatibility (EMC) Part 6-4: Generic standards - Emission standard for industrial environments | |
| Electromagnetic compatibility (EMC) Part 6-8: Generic standards - Emission standard for professional equipment in commercial and light-industrial locations | |
| Electromechanical switches for use in electrical and electronic equipment Part 1: Generic specification | |
| Electronic railway equipment - Train communication network (TCN) Part 2-6: On-board to ground communication | |
| Electronic railway equipment - Train communication network (TCN) Part 2-8: TCN conformance test | |
| Electrostatics - Part 4-9: Standard test methods for specific applications - Garments - Resistive characterization | |
| Electrostatics \x96 Part 4-11: Standard test methods for specific applications - Testing of electrostatic properties of composite IBC | |
| Electrostatics \x96 Part 4-6: Standard test methods for specific applications - Wrist straps | |
| Electrostatics \x96 Part 6-1: Electrostatic control in healthcare, commercial and public facilities - Healthcare | |
| Electrostatics Part 4-3: Standard test methods for specific applications - Footwear | |
| Electrostatics Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC) | |
| Electrostatics Part 4-5: Standard test methods for specific applications - Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person | |
| Electrostatics Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements | |
| Electrostatics Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements classification for packaging intended for electrostatic discharge sensitive devices | |
| Electrostatics Part 6-1: Electrostatic control for healthcare - General requirements for facilities | |
| Equipment for general lighting purposes - EMC immunity requirements | |
| Evaluation and routine testing in medical imaging departments \x96 Part 3-8: Acceptance and constancy tests - Imaging performance of X-ray equipment for radiography and radioscopy | |
| Evaluation and routine testing in medical imaging departments Part 3-6: Acceptance and Constancy tests - Imaging Performance of mammographic X-ray equipment used in a mammographic tomosynthesis mode of operation | |
| Evaluation and routine testing in medical imaging departments Part 3-7: Acceptance and constancy tests - Imaging performance of X-ray equipment for dental cone beam computed tomography | |
| Evaluation and routine testing in medical imaging departments Part 3: Acceptance tests and constancy tests - Imaging performance of computed tomography X-ray equipment | |
| Expression of performance of gas analyzers Part 2: Measuring Oxigen in gas utilizing high-temperature electrochemical sensors | |
| Failure modes and effects analysis (FMEA and FMECA) | |
| Fibre optic communication subsystem test procedures \x96 Part 2-13: Digital systems - Measurement of error vector magnitude | |
| Fibre optic communication subsystem test procedures Part 1-3: General communication subsystems - Measurement of central wavelength, spectral width and additional spectral characteristics | |
| Fibre optic communication subsystem test procedures Part 1-4: General communication subsystems - Light source encircled flux measurement method | |
| Fibre optic communication subsystem test procedures Part 2-8: Digital systems - Determination of low BER using Q-factor measurements | |
| Fibre optic communication subsystems Part 1: Generic specification | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedure Part 2-56: Tests - Wind resistance of mounted housing | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-11: Tests - Axial compression | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-26: Tests - Salt mist | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-38: Tests - Sealing for fibre optic sealed closures and hardened connectors using air pressure... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-45: Examinations and measurements - Attenuation of random mated multi-fibre connectors | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures \x96 Part 1: General and guidance | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures \x96 Part 2-27: Tests - Dust - Laminar flow | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures \x96 Part 2-34: Tests - Resistance to solvents and contaminating fluids | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures \x96 Part 2-44: Tests - Flexing of the strain relief of fibre optic devices and components | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures \x96 Part 3-46: Examinations and measurements - Bore diameter in rectangular ferrules | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures \x96 Part 3-53: Examinations and measurements - Encircled angular flux (EAF) measurement method based on two-dimensional far... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 1: General and guidance | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-10: Tests - Crush and load resistance | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-14: Tests - High optical power | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-18: Tests - Dry heat | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-1: Tests - Vibration (sinusoidal) | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-43: Tests - Screen testing of return loss of single-mode PC optical fibre connectors | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-46: Tests - Damp heat, cyclic | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-4: Tests - Fibre or cable retention | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-54: Tests - Corrosive atmosphere (mixed gas) | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-5: Tests - Torsion | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-21: Examinations and measurements - Switching time | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-30: Examinations and measurements - Endface geometry of rectangular ferrule | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-33: Examinations and measurements - Withdrawal force from a resilient alignment sleeve using pin gauges | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-35: Examinations and measurements - Visual inspection of fibre optic connectors and fibre-stub transceivers | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-53: Examinations and measurements - Encircled angular flux (EAF) measurement method based on two-dimensional far field... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-54: Examinations and measurements - Angular misalignment between ferrule bore axis and ferrule axis for cylindrical... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-55: Examinations and measurements - Polarisation extinction ratio and keying accuracy of polarisation maintaining, passive, optical... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss of single mode components... | |
| Fibre optic interconnecting devices and passive components - Fibre optic passive power control devices Part 1: Generic specification | |
| Fibre optic interconnecting devices and passive components - Non-wavelength-selec tive fibre optic branching devices \x96 Part 1: Generic specification | |
| Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-4: Examinations and measurements \x96 Attenuation | |
| Fibre-optic communication subsystem test procedures \x96 Part 4-2: Installed cabling plant - Single-mode attenuation and optical return loss measurements | |
| Fibre-optic communication subsystem test procedures Part 4-1: Installed cable plant - Multimode attenuation measurement | |
| Fibre-optic communication subsystem test procedures Part 4-3: Installed passive optical networks - Attenuation and optical return loss measurements | |
| Fibre-optic communication subsystem test procedures Part 4-5: Installed cabling plant - Attenuation measurement of MPO terminated fibre optic cabling plant using test equipment with MPO interfaces | |
| Fixed inductors for electromagnetic interference suppression - Part 2-1: Blank detail specification - Inductors for which safety tests are required | |
| Fixed inductors for electromagnetic interference suppression Part 1: Generic specification | |
| Fixed inductors for electromagnetic interference suppression Part 2: Sectional specification on power line chokes | |
| Fluorescent ultraviolet lamps used for tanning - Measurement and specification method | |
| Gas Analyzers - Expression of performance Part 3: Paramagnetic oxygen analysers | |
| Guidelines to specification of hydraulic turbine governing systems | |
| Identification link \x96 Part 2: Types/models, lots/batches, items and characteristics | |
| Identification Link Part 1: General requirements | |
| Industrial cable reels | |
| Industrial communication networks - Fieldbus specifications - Part 3-4: Data-link layer service definition - Type 4 elements | |
| Industrial communication networks - Fieldbus specifications Part 1: Overview and guidance for the IEC 61158 and IEC 61784 series | |
| Industrial communication networks - Fieldbus specifications Part 2: Physical layer specification and service definition | |
| Industrial communication networks - Fieldbus specifications Part 3-12: Data-link layer service definition - Type 12 elements | |
| Industrial communication networks - Fieldbus specifications Part 3-19: Data-link layer service definition - Type 19 elements | |
| Industrial communication networks - Fieldbus specifications Part 3-21: Data-link layer service definition - Type 21 elements | |
| Industrial communication networks - Fieldbus specifications Part 3-24: Data-link layer service definition - Type 24 elements | |
| Industrial communication networks - Fieldbus specifications Part 3-25: Data-link layer service definition - Type 25 elements | |
| Industrial communication networks - Fieldbus specifications Part 3-28: Data-link layer service definition - Type 28 elements | |
| Industrial communication networks - Fieldbus specifications Part 3-2: Data-link layer service definition - Type 2 elements | |
| Industrial communication networks - Fieldbus specifications Part 4 -19: Data-link layer protocol specification - Type 19 elements | |
| Industrial communication networks - Fieldbus specifications Part 4-12: Data-link layer protocol specification - Type 12 elements | |
| Industrial communication networks - Fieldbus specifications Part 4-21: Data-link layer protocol specification - Type 21 elements | |
| Industrial communication networks - Fieldbus specifications Part 4-24: Data-link layer protocol specification - Type 24 elements | |
| Industrial communication networks - Fieldbus specifications Part 4-25: Data-link layer protocol specification - Type 25 elements | |
| Industrial communication networks - Fieldbus specifications Part 4-28: Data-link layer protocol specification - Type 28 elements | |
| Industrial communication networks - Fieldbus specifications Part 4-2: Data-link layer protocol specification - Type 2 elements | |
| Industrial communication networks - Fieldbus specifications Part 4-3: Data-link layer protocol specification - Type 3 elements | |
| Industrial communication networks - Fieldbus specifications Part 4-4: Data-link layer protocol specification - Type 4 elements | |
| Industrial communication networks - Fieldbus specifications Part 5-10: Application layer service definition - Type 10 elements | |
| Industrial communication networks - Fieldbus specifications Part 5-12: Application layer service definition - Type 12 elements | |
| Industrial communication networks - Fieldbus specifications Part 5-19: Application layer service definition - Type 19 elements | |
| Industrial communication networks - Fieldbus specifications Part 5-21: Application layer service definition - Type 21 elements | |
| Industrial communication networks - Fieldbus specifications Part 5-23: Application layer service definition - Type 23 elements | |
| Industrial communication networks - Fieldbus specifications Part 5-24: Application layer service definition - Type 24 elements | |
| Industrial communication networks - Fieldbus specifications Part 5-25: Application layer service definition - Type 25 elements | |
| Industrial communication networks - Fieldbus specifications Part 5-26: Application layer service definition - Type 26 elements | |
| Industrial communication networks - Fieldbus specifications Part 5-27: Application layer service definition - Type 27 elements | |
| Industrial communication networks - Fieldbus specifications Part 5-28: Application layer service definition - Type 28 elements | |
| Industrial communication networks - Fieldbus specifications Part 5-2: Application layer service definition - Type 2 elements | |
| Industrial communication networks - Fieldbus specifications Part 5-4: Application layer service definition - Type 4 elements | |
| Industrial communication networks - Fieldbus specifications Part 6-10: Application layer protocol specification - Type 10 elements | |
| Industrial communication networks - Fieldbus specifications Part 6-12: Application layer protocol specification - Type 12 elements | |
| Industrial communication networks - Fieldbus specifications Part 6-19: Application layer protocol specification - Type 19 elements | |
| Industrial communication networks - Fieldbus specifications Part 6-21: Application layer protocol specification - Type 21 elements | |
| Industrial communication networks - Fieldbus specifications Part 6-23: Application layer protocol specification - Type 23 elements | |
| Industrial communication networks - Fieldbus specifications Part 6-24: Application layer protocol specification - Type 24 elements | |
| Industrial communication networks - Fieldbus specifications Part 6-25: Application layer protocol specification - Type 25 elements | |
| Industrial communication networks - Fieldbus specifications Part 6-26: Application layer protocol specification - Type 26 elements | |
| Industrial communication networks - Fieldbus Specifications Part 6-27: Application layer protocol specification - Type 27 elements | |
| Industrial communication networks - Fieldbus specifications Part 6-28: Application layer protocol specification - Type 28 elements | |
| Industrial communication networks - Fieldbus specifications Part 6-2: Application layer protocol specification - Type 2 elements | |
| Industrial communication networks - Fieldbus specifications Part 6-3: Application layer protocol specification - Type 3 elements | |
| Industrial communication networks - Fieldbus specifications Part 6-4: Application layer protocol specification - Type 4 elements | |
| Industrial networks - Single-drop digital communication interface Part 2: Functional safety extensions | |
| Installation couplers intended for permanent connection in fixed installations | |
| Instruments and software used for measurement in high-voltage and highcurrent tests Part 3: Requirements for hardware for tests with alternating and direct voltages and currents | |
| Insulating liquids - Specifications for unused liquids based on synthetic aromatic hydrocarbons | |
| Insulating liquids - Test methods for oxidation stability - Test method for evaluating the oxidation stability of insulating liquids in the delivered state | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins... | |
| Insulators for overhead lines \x96 Composite suspension and tension insulators with AC voltage greater than 1 000 V and DC voltage greater than 1 500 V \x96 Definitions, test methods... | |
| Interruttori per apparecchi Parte 2: Prescrizioni particolari per interruttori utilizzati negli utensili elettrici a motore portatili, utensili elettrici a motore trasportabili ed apparecchi elettrici per il giardinaggio | |
| Lamp controlgear Part 2-14: Particular requirements for DC and/or AC supplied electronic controlgear for fluorescent induction lamps | |
| Lamps and light sources for road vehicles - Dimensional, electrical and luminous requirements | |
| Lamps for road vehicles - Dimensional, electrical and luminous requirements | |
| Lamps, light sources and LED packages for road vehicles - Performance requirements | |
| Live working - Conductive clothing | |
| Live working - Hand tools for use up to 1 000 V AC and 1 500 V DC | |
| Live working - Methods for assessment of defects and verification of performance applicable to tools, devices and equipment | |
| Live working - Minimum approach distances Part 2: Method of determination of the electrical component distance for AC systems 1,0 kV to 72,5 kV | |
| Live working - Protective clothing against the thermal hazards of an electric arc Part 1-1: Test methods - Method 1: Determination of the arc rating (ELIM, ATPV and/or EBT) of... | |
| Live working - Voltage detectors Part 1: Capacitive type to be used for voltages exceeding 1 kV AC | |
| Low-voltage switch mode power supplies Part 3: Electromagnetic compatibility (EMC) | |
| Low-voltage switch mode power supplies Part 7: Safety requirements | |
| Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units | |
| Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - Semiconductor motor controllers, starters and soft-starters | |
| Low-voltage switchgear and controlgear \x96 Part 2: Circuit-breakers | |
| Low-voltage switchgear and controlgear \x96 Part 4-2: Contactors and motor-starters - Semiconductor motor controllers, starters and soft-starters | |
| Low-voltage switchgear and controlgear \x96 Part 4-3: Contactors and motor-starters - Semiconductor controllers and semiconductor contactors for non-motor loads | |
| Low-voltage switchgear and controlgear \x96 Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices | |
| Low-voltage switchgear and controlgear \x96 Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS) | |
| Low-voltage switchgear and controlgear \x96 Part 7-1: Ancillary equipment - Terminal blocks for copper conductors | |
| Low-voltage switchgear and controlgear \x96 Part 9-2: Active arc-fault mitigation systems - Optical-based internal arc-detection and mitigation devices | |
| Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks | |
| Low-voltage switchgear and controlgear assemblies \x96 Part 1: General rules | |
| Low-voltage switchgear and controlgear assemblies \x96 Part 3: Distribution boards intended to be operated by ordinary persons (DBO) | |
| Low-voltage switchgear and controlgear assemblies \x96 Part 5: Assemblies for power distribution in public networks | |
| Low-voltage switchgear and controlgear assemblies Part 1: General rules | |
| Low-voltage switchgear and controlgear assemblies Part 2: Power switchgear and controlgear assemblies | |
| Low-voltage switchgear and controlgear assemblies Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations | |
| Low-voltage switchgear and controlgear Part 1: General rules | |
| Low-voltage switchgear and controlgear Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units | |
| Low-voltage switchgear and controlgear Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters | |
| Low-voltage switchgear and controlgear Part 5-2: Control circuit devices and switching elements - Proximity switches | |
| Low-voltage switchgear and controlgear Part 5-8: Control circuit devices and switching elements - Three-position enabling switches | |
| Low-voltage switchgear and controlgear Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS) | |
| Low-voltage switchgear and controlgear Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors | |
| Low-voltage switchgear and controlgear Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines | |
| Low-voltage switchgear and controlgear Part 9-1: Active arc-fault mitigation systems - Arc quenching devices | |
| Maritime navigation and radiocommunication equipment and systems - Digital interfaces \x96 Part 1: Single talker and multiple listeners | |
| Maritime navigation and radiocommunication equipment and systems - Digital interfaces \x96 Part 2: Single talker and multiple listeners, high-speed transmission | |
| Maritime navigation and radiocommunication equipment and systems - Digital interfaces Part 450: Multiple talkers and multiple listeners - Ethernet interconnection | |
| Maritime navigation and radiocommunication equipment and systems - Digital interfaces Part 460: Multiple talkers and multiple listeners - Ethernet interconnection - Safety and security | |
| Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) Part 5: BeiDou navigation satellite system (BDS) - Receiver equipment - Performance requirements, methods of testing and... | |
| Marking of electrical equipment with ratings related to electrical supply - Safety requirements | |
| Marking on ferrite cores | |
| Materials for printed boards and other interconnecting structures Part 2-45: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity (1,0 W/m\x95K) and... | |
| Materials for printed boards and other interconnecting structures Part 2-46: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity (1,5 W/m\x95K) and... | |
| Materials for printed boards and other interconnecting structures Part 2-47: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity (2,0 W/m\x95K) and... | |
| Materials for printed boards and other interconnecting structures Part 2-51: Reinforced base materials, clad and unclad - Base materials for integrated circuit card carrier tape, unclad | |
| Materials for printed boards and other interconnecting structures Part 6-3: Sectional specification set for reinforcement materials - Specification for finished fabric woven from "E" glass for printed boards | |
| Modular order for the development of mechanical structures for electrical and electronic equipment practices Part 1: Generic standard | |
| Nuclear facilities - Instrumentation and control systems - Design, location and application criteria for installed area gamma radiation dose rate monitoring equipment for use during normal operation and anticipated operational... | |
| Nuclear power plants - Control rooms - Design | |
| Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems | |
| Nuclear power plants - Instrumentation and control systems important to safety - Data communication in systems performing category A functions | |
| Nuclear power plants - Instrumentation, control and electrical power systems - Requirements for static uninterruptible DC and AC power supply systems | |
| Nuclear power plants - Instrumentation, control and electrical power systems important to safety - Categorization of functions and classification of systems | |
| Optical amplifiers - Test methods Part 1-1: Power and gain parameters - Optical spectrum analyzer method | |
| Optical amplifiers - Test methods Part 1-3: Power and gain parameters - Optical power meter method | |
| Optical amplifiers - Test methods Part 1: Power and gain parameters | |
| Optical amplifiers - Test methods Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control | |
| Optical amplifiers - Test methods Part 4-4: Gain transient parameters - Single channel optical amplifiers with gain control | |
| Optical amplifiers Part 1: Generic specification | |
| Optical amplifiers Part 2: Single channel applications - Performance specification template | |
| Optical fibre cables - Part 1-306: Generic specification - Basic optical cable test procedures - Cable element test methods - Ribbon torsion, Method G6 | |
| Optical fibre cables \x96 Part 1-307: Generic specification - Basic optical cable test procedures - Cable element test methods - Tube kinking, method G7 | |
| Optical fibre cables \x96 Part 1-311: Generic specification - Basic optical cable test procedures - Cable element test methods - Tensile strength and elongation test for cable elements, method G11A... | |
| Optical fibre cables \x96 Part 1-312: Generic specification - Basic optical cable test procedures - Cable element test methods - Elongation test for buffer tubes, Method G11B | |
| Optical fibre cables \x96 Part 2-20: Indoor cables - Family specification for multi-fibre optical cables | |
| Optical fibre cables \x96 Part 2-23: Indoor cables - Detail specification for multi-fibre cables for use in MPO connector terminated cable assemblies | |
| Optical fibre cables \x96 Part 2-24: Indoor cables - Detail specification for multiple multi-fibre unit cables for use in MPO connector terminated breakout cable assemblies | |
| Optical Fibre Cables Part 1-215: Generic specification - Basic optical cable test procedures - Environmental test methods - Cable external freezing test, Method F15 | |
| Optical fibre cables Part 1-305: Generic specification - Basic optical cable test procedures - Cable element test methods - Ribbon tear (separability), Method G5 | |
| Optical fibre cables Part 1-308: Generic specification - Basic optical cable test procedures - Cable element test methods - Ribbon residual twist test, method G8 | |
| Optical fibre cables Part 1-309: Generic specification - Basic optical cable test procedures - Cable element test methods - Bleeding and evaporation of filling or flooding compounds, Method G9 | |
| Optical fibre cables Part 1-310: Generic specification - Basic optical cable test procedures - Cable element test methods - Strippability, method G10 | |
| Optical fibre cables Part 1-31: Generic specification - Optical cable elements - Optical fibre ribbon | |
| Optical fibre cables Part 1-401: Generic specification - Basic optical cable test procedures - Electrical test methods - Short-circuit test (for OPGW, OPPC and OPAC), Method H1 | |
| Optical fibre cables Part 1-402: Generic specification - Basic optical cable test procedures - Electrical test methods - Lightning test (for OPGW, OPPC and OPAC), Method H2 | |
| Optical fibre cables Part 1-403: Generic specification - Basic optical cable test procedures - Electrical test methods - Electrical continuity test of cable metallic elements, method H3 | |
| Optical fibre cables Part 1-404: Generic specification - Basic optical cable test procedures - Electrical test methods - Current-temperature test, Method H4 | |
| Optical fibre cables Part 2-10: Indoor optical fibre cables - Family specification for simplex and duplex cables | |
| Optical fibre cables Part 2-11: Indoor cables - Detailed specification for simplex and duplex cables for use in premises cabling | |
| Optical fibre cables Part 2-21: Indoor cables - Detailed specification for multi-fibre optical distribution cables for use in premises cabling | |
| Optical fibre cables Part 2-30: Indoor cables - Family specification for optical fibre ribbon cables for use in terminated cable assemblies | |
| Optical fibre cables Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling | |
| Optical fibre cables Part 2-50: Indoor cables - Family specification for simplex and duplex cables for use in terminated cable assemblies | |
| Optical fibre cables Part 3-12: Outdoor cables - Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling | |
| Optical fibre cables Part 3-40: Outdoor cables - Family specification for cables for storm and sanitary sewers | |
| Optical fibre cables Part 3-70: Outdoor cables - Family specification for outdoor optical fibre cables for rapid/multiple deployment | |
| Optical fibre cables Part 3: Outdoor cables - Sectional specification | |
| Optical fibre cables Part 4-20: Sectional specification - Aerial optical cables along electrical power lines - Family specification for ADSS (all dielectric self-supported) optical cables | |
| Optical fibre cables Part 4-30: Aerial optical cables along electrical power lines - Family specification for optical phase conductor (OPPC) optical cables | |
| Optical fibre cables Part 4: Sectional specification - Aerial optical cables along electrical power lines | |
| Optical fibre cables Part 6-10: Indoor-outdoor cables - Family specification for universal indooroutdoor cables | |
| Optical fibre cables Part 6-20: Indoor-outdoor cables - Family specification for flame retardant outdoor cables | |
| Optical fibre cables Part 6-30: Indoor-outdoor cables - Family specification for weatherised indoor cables | |
| Optical fibre cables Part 6: Indoor-outdoor cables - Sectional specification for indoor-outdoor cables | |
| Panel mounted equipment - Electrical measuring instruments - Dimensions for panel mounting | |
| Passive filter units for electromagnetic interference suppression \x96 Part 3: Passive filter units for which safety tests are appropriate | |
| Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics | |
| Photovoltaic devices Part 10: Methods of linear dependence and linearity measurements | |
| Photovoltaic devices Part 1: Measurement of photovoltaic current-voltage characteristics | |
| Photovoltaic devices Part 2: Requirements for photovoltaic reference devices | |
| Photovoltaic devices Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data | |
| Photovoltaic devices Part 4: Reference solar devices - Procedures for establishing calibration traceability | |
| Photovoltaic devices Part 7: Computation of the spectral mismatch correction for measurements of photovoltaic devices | |
| Photovoltaic devices Part 9: Classification of solar simulator characteristics | |
| Printed board assemblies Part 1: Generic specification - Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies | |
| Printed boards and printed board assemblies - Design and use Part 6-4: Land pattern design - Generic requirements for dimensional drawings of surface mounted components (SMD) from the viewpoint of... | |
| Programmable controllers \x96 Part 3: Programming languages | |
| Programmable controllers Part 10: PLC open XML exchange format | |
| Programmable controllers Part 9: Single-drop digital communication interface for small sensors and actuators (SDCI) | |
| Radiation protection instrumentation - Installed personnel surface contamination monitoring assemblies | |
| Radio frequency and coaxial cable assemblies \x96 Part 2-1: Sectional specification for flexible coaxial cable assemblies | |
| Radio frequency and coaxial cable assemblies \x96 Part 2-2: Blank detail specification for flexible coaxial cable assemblies | |
| Radio frequency and coaxial cable assemblies \x96 Part 4: Sectional specification for semi-rigid coaxial cable assemblies | |
| Radio frequency and coaxial cable assemblies Part 1: Generic specification - General requirements and test methods | |
| Radio frequency and coaxial cable assemblies Part 2-8: Detail specification for cable assemblies for radio and TV receivers - Frequency range up to 3 000 MHz, Screening class A++, IEC... | |
| Radio frequency and coaxial cable assemblies Part 3-3: Detail specification for semi-flexible cable assemblies (jumper) - Frequency range up to 18 GHz, Type 50-141 semi-flexible coaxial cable | |
| Radio frequency and coaxial cable assemblies Part 3-4: Detail specification for semi-flexible cable assemblies (jumper) - Frequency range up to 6 GHz, Type 50-141 semi-flexible coaxial cable | |
| Radio frequency and coaxial cable assemblies Part 4-2: Detail specification for semi rigid cable assemblies (jumper) - Frequency range up to 6 000 MHz, type 50-9 semi-rigid coaxial cable | |
| Radio frequency and coaxial cable assemblies Part 4-3: Detail specification for semi-rigid cable assemblies - Frequency range up to 6 000 MHz, type 50-12 low loss semi-rigid coaxial cable | |
| Radio frequency connectors Part 1-5: Electrical test methods - Rise time degradation | |
| Radio frequency connectors Part 54: Sectional specification for coaxial connectors with 10 mm inner diameter of outer conductor, nominal characteristic impedance 50 Ohms, Series 4,3-10 | |
| Radio frequency connectors Part 63: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 75 ohms (type... | |
| Radio frequency connectors Part 64: Sectional specification - RF coaxial connectors with 0,8 mm inner diameter of outer conductor - Characteristic impedance 50 O (type 0,8) | |
| Radio frequency connectors Part 67: Sectional specification for series TRL threaded triaxial connectors | |
| Radio-frequency connectors - Part 70: Sectional specification for series HD-BNC radio-frequency coaxial connectors - Characteristic Impedance 75 O | |
| Radio-frequency connectors \x96 Part 1-9: Mechanical test methods - Safety wire hole pull-out | |
| Radio-frequency connectors \x96 Part 10: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 3 mm (0,12 in) with snap-on coupling - Characteristic impedance 50 O (Type... | |
| Radio-frequency connectors Part 1-2: Electrical test methods - Insertion loss | |
| Radio-frequency connectors Part 1-4: Electrical test methods - Voltage standing wave ratio, return loss and reflection coefficient | |
| Radio-frequency connectors Part 1-6: Electrical test methods - RF power | |
| Radio-frequency connectors Part 15: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 4,13 mm (0,163 in) with threaded coupling - Characteristic impedance 50 O (Type SMA)... | |
| Radio-frequency connectors Part 17: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with screw coupling - Characteristic impedance 50 ohms (Type TNC)... | |
| Radio-frequency connectors Part 21: Sectional specification for RF connectors with inner diameter of outer conductor 9,5 mm (0,374 in) with screw coupling -Characteristic impedance 50 ohms (Type SC) | |
| Radio-frequency connectors Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable networks (type F) | |
| Radio-frequency connectors Part 4: RF coaxial connectors with inner diameter of outer conductor 16 mm (0,63 in) with screw lock - Characteristic impedance 50 O (type 7-16) | |
| Radio-frequency connectors Part 60: Sectional specification for RF coaxial connectors with push on mating - Characteristic impedance 50 Ohm (type SMPM) | |
| Radio-frequency connectors Part 61: Sectional specification for RF coaxial connectors with 9.5 mm inner diameter of outer conductor with quick lock coupling,series Q4.1-9.5 | |
| Radio-frequency connectors Part 65: Sectional specification for RF coaxial connectors, 1,35 mm inner diameter of outer conductor, with screw-coupling, characteristic impedance 50 Ohm | |
| Radio-frequency connectors Part 66: Sectional specification for RF coaxial connectors with 5 mm inner diameter of outer conductor, with quick-lock- or screw-coupling, characteristic impedance 50 Ohm (series 2,2-5) | |
| Radio-frequency connectors Part 68: Sectional specification for series TRK bayonet coupling triaxial connectors | |
| Radio-frequency connectors Part 71: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 5 mm - Characteristic impedance 50 Ohms - type NEX10\xae | |
| Radio-frequency connectors- Part 69: Sectional specification for RF coaxial connectors with push on mating - Characteristics impedance 50 ohm (type SMP3) | |
| Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service | |
| Reliability stress screening Part 2: Components | |
| Reliability testing - Compliance test plans for success ratio | |
| Reliability testing - Compliance tests for constant failure rate and constant failure intensity | |
| Residual current-operated protective devices (RCDs) for household and similar use Electromagnetic compatibility | |
| Residual current-operated protective devices (RCDs) for household and similar use. Electromagnetic compatibility | |
| Rules for steam turbine thermal acceptance tests Part 0: Wide range of accuracy for various types and sizes of turbines | |
| Rules for steam turbine thermal acceptance tests Part 3: Thermal performance verification tests of retrofitted steam turbines | |
| Safety of laser products \x96 Part 4: Laser guards | |
| Safety of laser products Part 12: Safety of free space optical communication systems used for transmission of information | |
| Safety of machinery - Electro-sensitive protective equipment Part 1: General requirements and tests | |
| Safety of machinery - Electro-sensitive protective equipment Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) | |
| Safety of machinery - Electro-sensitive protective equipment Part 3: Particular requirements for active opto-electronic protective devices responsive to diffuse Reflection (AOPDDR) | |
| Safety requirements for electrical equipment for measurement control, and laboratory use Part 2-120: Particular safety requirements for machinery aspects of equipment | |
| Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-010: Particular requirements for laboratory equipment for the heating of materials | |
| Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-011: Particular requirements for refrigerating equipment | |
| Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment | |
| Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement | |
| Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-033: Particular requirements for hand-held multimeters for domestic and professional use, capable of measuring mains voltage | |
| Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials | |
| Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-051: Particular requirements for laboratory equipment for mixing and stirring | |
| Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization | |
| Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes | |
| Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-091: Particular requirements for cabinet X-ray systems | |
| Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-030: Particular requirements for equipment having testing or measuring circuits | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-034: Particular requirements for measurement equipment for insulation resistance and test equipment for electric strength | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-130: Particular requirements for equipment intended to be used in educational establishments by children | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-201: Particular requirements for control equipment | |
| Switches for appliances Part 1: General requirements | |
| Switches for appliances Part 2-1: Particular requirements for cord switches | |
| Switches for appliances Part 2-4: Particular requirements for independently mounted switches | |
| Switches for appliances Part 2-5: Particular requirements for change-over selectors | |
| Synthetic organic esters - Guidelines for maintenance and use in electrical equipment | |
| Terrestrial photovoltaic (PV) modules - Design qualification and type approval Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules | |
| Terrestrial photovoltaic (PV) modules - Design qualification and type approval Part 1-2: Special requirements for testing of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modules | |
| Terrestrial photovoltaic (PV) modules - Design qualification and type approval Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules | |
| Terrestrial photovoltaic (PV) modules - Design qualification and type approval Part 1-4: Special requirements for testing of thin-film Cu(In,GA)(S,Se)2 based photovoltaic (PV) modules | |
| Terrestrial photovoltaic (PV) modules - Design qualification and type approval Part 1: Test requirements | |
| Terrestrial photovoltaic (PV) modules - Design qualification and type approval Part 2: Test procedures | |
| Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV) | |
| Test methods for electrical materials, circuit board and other interconnection structures and assemblies \x96 Part 2-720: Detection of defects in interconnection structures by measurement of capacitance | |
| Test methods for electrical materials, circuit boards and other interconnection structures and assemblies \x96 Part 2-809: X/Y coefficient of thermal expansion (CTE) test for thick base materials by TMA | |
| Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 2-804: Test methods for time to delamination - T260, T288, T300 | |
| Test methods for electrical materials, printed board and other interconnection structures and assemblies \x96 Part 2-805: X/Y CTE Test for Thin Base Materials by TMA | |
| Test methods for electrical materials, printed board and other interconnection structures and assemblies \x96 Part 2-808: Thermal resistance of an assembly by thermal transient method | |
| Test methods for electrical materials, printed board and other interconnection structures and assemblies Part 2-630: Test methods for materials for interconnection structures - Moisture absorption after pressure vessel conditioning | |
| Test methods for electrical materials, printed board and other interconnection structures and assemblies Part 5-502: General test methods for materials and assemblies - Surface insulation resistance (SIR) testing of assemblies... | |
| Test methods for electrical materials, printed board and other interconnection structures and assemblies Part 5-504: General test methods for materials and assemblies - Process ionic contamination testing (PICT) | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-801: Thermal conductivity test for base materials | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 2-501: Test methods for materials for interconnection structures - Measurement of resilience strength and resilience strength... | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 2-807: Test methods for materials for interconnection structures - Decomposition temperature (Td) using TGA | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 5-301: General test methods for materials and assemblies - Soldering paste using fine solder parti | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 5-501: General test methods for materials and assemblies - Surface insulation resistance (SIR) testing of solder... | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 5-601: General test methods for materials and assemblies - Reflow soldering ability test for solder joint,... | |
| Title Electrical equipment for measurement, control and laboratory use -EMC requirements Part 1: General requirements | |
| Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures | |
| Varistors for use in electronic equipment Part 1: Generic specification | |
| Varistors for use in electronic equipment Part 2: Sectional specification for surge suppression varistors | |
| Wind energy generation systems - Part 21-1: Measurement and assessment of electrical characteristics - Wind turbines | |
| Wind energy generation systems \x96 Part 12-1: Power performance measurements of electricity producing wind turbines | |
| Wind energy generation systems \x96 Part 15-1: Site suitability input conditions for wind power plants | |
| Wind energy generation systems \x96 Part 24: Lightning protection | |
| Wind energy generation systems \x96 Part 3-2: Design requirements for floating offshore wind turbines | |
| Wind energy generation systems \x96 Part 4: Design requirements for wind turbine gearboxes | |
| Wind energy generation systems \x96 Part 50-3: Use of nacelle-mounted lidars for wind measurements | |
| Wind energy generation systems \x96 Part 6: Tower and foundation design requirements | |
| Wind energy generation systems \x96 Part 8: Design of wind turbine structural components | |
| Wind energy generation systems Part 12-1: Power performance measurement of electricity producing wind turbines | |
| Wind energy generation systems Part 12-2: Power performance of electricity producing wind turbines based on nacelle anemometry | |
| Wind energy generation systems Part 12-3: Power performance - Measurement based site calibration | |
| Wind energy generation systems Part 12-5: Power performance - Assessment of obstacles and terrain | |
| Wind energy generation systems Part 12-6: Measurement based nacelle transfer function of electricity producing wind turbines | |
| Wind energy generation systems Part 12: Power performance measurements of electricity producing wind turbines - Overview | |
| Wind energy generation systems Part 1: Design requirements | |
| Wind energy generation systems Part 24: Lightning protection | |
| Wind energy generation systems Part 26-1: Availability for wind energy generation systems | |
| Wind energy generation systems Part 27-1: Electrical simulation models - Generic models | |
| Wind energy generation systems Part 27-2: Electrical simulation models - Model validation | |
| Wind energy generation systems Part 3-1: Design requirements for fixed offshore wind turbines | |
| Wind energy generation systems Part 50-1: Wind measurement - Application of meteorological mast, nacelle and spinner mounted instruments | |
| Wind energy generation systems Part 50-2: Wind Measurement - Application of ground mounted remote sensing technology | |
| Wind energy generation systems Part 50-3: Use of nacelle-mounted lidars for wind measurements | |
| Wind energy generation systems Part 50: Wind measurement - Overview | |
| Wind energy generation systems Part 5: Wind turbine blades | |
| Wind energy generation systems Part 6: Tower and foundation design requirements | |
| Winding wires - Test methods - Part 3: Mechanical properties | |
| Winding wires - Test methods Part 1: General | |
| Winding wires - Test methods Part 2: Determination of dimensions |
| << Prev | Next >> |