Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
450
500
550
600
650
700
720
730
740
750
760
770
780
781
782
783
784
785
786
787
788
789
790
791
792
800
810
820
830
840
850
900
950
1000
1050
1100
1150
1500
1620
| Product Name | Notes |
|---|---|
| AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements | |
| Aircraft batteries Part 1: General test requirements and performance levels | |
| Aircraft batteries Part 2: Design and construction requirements | |
| Aircraft batteries Part 3: Product specification and declaration of design and performance (DDP) | |
| Alarm and electronic security systems Part 11-1: Standard for electronic access control systems - System and components requirements | |
| Alarm and electronic security systems Part 11-2: Electronic access control systems - Application guidelines | |
| Alarm and electronic security systems Part 11-31: Electronic access control systems - Core interoperability protocol based on Web services | |
| Alarm and electronic security systems Part 11-32: Electronic access control systems - Access control monitoring based on Web services | |
| all'ondulazione - residua - sulla - porta - di - Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test | |
| Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) | |
| Apparecchiature per la tecnologia dell'informazione - Sicurezza - Parte 23: Grandi apparecchiature per l'archiviazione dei dati | |
| Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements | |
| Arc welding equipment Part 10: Electromagnetic compatibility (EMC) requirements | |
| Arc welding equipment Part 11: Electrode holders | |
| Arc welding equipment Part 12: Coupling devices for welding cables | |
| Arc welding equipment Part 13: Welding clamp | |
| Arc welding equipment Part 1: Welding power sources | |
| Arc welding equipment Part 2: Liquid cooling systems | |
| Arc welding equipment Part 3: Arc striking and stabilizing devices | |
| Arc welding equipment Part 4: Periodic inspection and testing | |
| Arc welding equipment Part 5: Wire feeders | |
| Arc welding equipment Part 6: Limited duty equipment | |
| Arc welding equipment Part 7:Torches | |
| Arc welding equipment Part 8: Gas consoles for welding and plasma cutting systems | |
| Arc welding equipment Part 9: Installation and use | |
| Audio recording - Compact disc digital audio system | |
| Audio, video and audiovisual systems - Interconnections and matching values - Part 3: Interface for the interconnection of ENG cameras and portable VTRs using non-composite signals, for 625 lines/50 field... | |
| Audio, video and audiovisual systems - Interconnections and matching values - Part 4: Connector and cordset for domestic digital bus (D2B) | |
| Audio, video and audiovisual systems - Interconnections and matching values - Part 5: Y/C connector for video systems Electrical matching values and description of the connector | |
| Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements | |
| Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements | |
| Auxiliaries for lamps - Starting devices (other than glow starters) Performance requirements | |
| Auxilliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements | |
| Ballasts for tubular fluorescent lamps - Performance requirements | |
| Capacitors and resistors for use in electronic equipment - Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bushmounted, shaft-operated electronic components | |
| Circuit-breakers for equipment (CBE) | |
| Circuit-breakers for overcurrent protection for household and similar installations - Part 2: Circuit-breakers for a.c. and d.c. operation | |
| Complete filter units for radio interference suppression Part 2-1: Blank detail specification - Passive filter units for electromagnetic interference suppression - Filters for which safety tests are required (Assessment level... | |
| Complete filter units for radio interference suppression Part 2-2: Blank detail specification - Passive filter units for electromagnetic interference suppression - Filters for which safety tests are required (Safety tests... | |
| Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2... | |
| Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to... | |
| Connecting devices for low voltage circuits for household and similar purposes - Part 2-4: Particular requirements for twist-on connecting devices | |
| Connecting devices for low-voltage circuits for household and similar purposes - Part 1: General requirements | |
| Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units | |
| Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units | |
| Connecting devices for low-voltage circuits for household and similar purposes - Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units | |
| Connectors for optical fibres and cables - Part 17: Sectional specification for fibre optic connector - Type F-05 (friction lock) | |
| Connectors for optical fibres and cables - Part 19: Sectional specification for fibre optic connector - Type SC-D (uplex) | |
| Determination of the maximum symmetrical radiation field from a rotating anode X-ray tube for medical diagnosis | |
| Digital audio interface - Part 4: Professional applications | |
| Digital audio interface Part 1: General | |
| Digital audio interface Part 3: Consumer applications | |
| Digital audio interface Part 4-1: Professional applications - Audio content | |
| Digital audio interface Part 4-2: Professional applications - Metadata and subcode | |
| Digital audio interface Part 4-4: Professional applications - Physical and electrical | |
| Dimensioni di trasformatori ed induttori per uso in telecomunicazioni ed apparecchiature elettroniche - Parte 4: Trasformatori e induttori che usano laminati YUI-2 | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 100: General | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 201: General tests - Measurement of insulation thickness | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 202: General tests - Measurement of thickness of non-metallic sheath | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 203: General tests - Measurement of overall dimensions | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 301: Electrical tests - Measurement of the permittivity at 23 \xb0C of filling compounds | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 302: Electrical tests - Measurement of the d.c. resistivity at 23 \xb0C and 100 \xb0C of filling compounds... | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 402: Miscellaneous tests - Water absorption tests | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 403: Miscellaneous tests - Ozone resistance tests on cross-linked compounds | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 404: Miscellaneous tests - Mineral oil immersion tests for sheaths | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 406: Miscellaneous tests - Resistance to stress cracking of polyethylene and polypropylene compounds | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 408: Miscellaneous tests - Long-term stability test of polyethylene and polypropylene compounds | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 411: Miscellaneous tests - Low temperature brittleness of filling compounds | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 502: Mechanical tests - Shrinkage test for insulations | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 503: Mechanical tests - Shrinkage test for sheaths | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 505: Mechanical tests - Elongation at low temperature for insulations and sheaths | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 506: Mechanical tests - Impact test at low temperature for insulations and sheaths | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 507: Mechanical tests - Hot set test for cross-linked materials | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test) | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 510: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after thermal ageing in... | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene and polypropylene compounds | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene compounds | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 512: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break... | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 513: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after conditioning | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 601: Physical tests - Measurement of the drop point of filling compounds | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 602: Physical tests - Separation of oil in filling compounds | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 603: Physical tests - Measurement of total acid number of filling compounds | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 605: Physical tests - Measurement of carbon black and/or mineral filler in polyethylene compounds | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 606: Physical tests - Methods for determining the density | |
| Electric and optical fibre cables - Test methods for non-metallic materials Part 607: Physical tests - Test for the assessment of carbon black dispersion in polyethylene and polypropylene | |
| Electrical accessories - Circuit breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation | |
| Electrical accessories - Circuit breakers for overcurrent protection for household and similar installations Part 1: Circuit-breakers for a.c. operation | |
| Electrical accessories - Cord sets and interconnection cord sets | |
| Electrical and pneumatic analogue chart recorders for use in industrial process control systems - Part 2: Guidance for inspection and routine testing | |
| Electrical and pneumatic analogue chart recorders for use in industrialprocess systems - Part 1: Methods for performance evaluation | |
| Electrical test methods for electric cables - Part 2: Partial discharge tests | |
| Electrical test methods for electric cables Part 3: Test methods for partial discharge measurements on lengths of extruded power cables | |
| Electroacoustics - Sound calibrators | |
| Electrolyte for vented nickel-cadmium cells | |
| Electromagnetic compatibility (EMC) - Part 2-10: Environment - Description of HEMP environment - Conducted disturbance | |
| Electromagnetic compatibility (EMC) - Part 2-12: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems | |
| Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems | |
| Electromagnetic compatibility (EMC) - Part 2-4: Environment - Compatibility levels in industrial plants for low-frequency conducted disturbances | |
| Electromagnetic compatibility (EMC) - Part 2: Environment - Section 9: Description of HEMP environment - Radiated disturbance Basic EMC publication | |
| Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current = 75 A and... | |
| Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase) | |
| Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test | |
| Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests | |
| Electromagnetic compatibility (EMC) - Part 4-12: Testing and measurement techniques - Ring wave immunity test | |
| Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests | |
| Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation, immunity test | |
| Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuations, immunity test | |
| Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz | |
| Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test | |
| Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Oscillatory wave immunity test | |
| Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series | |
| Electromagnetic compatibility (EMC) - Part 4-23: Testing and measurement techniques - Test methods for protective devices for HEMP and other radiated disturbances | |
| Electromagnetic compatibility (EMC) - Part 4-25: Testing and measurement techniques - HEMP immunity test methods for equipment and systems | |
| Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques - Unbalance, immunity test | |
| Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test | |
| Electromagnetic Compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power ports, immunity tests | |
| Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test | |
| Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 24: Test methods for protective devices for HEMP conducted disturbance Basic EMC publication | |
| Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section10: Damped oscillatory magnetic field immunity test \x96 Basic EMC Publication | |
| Electromagnetic compatibility (EMC) \x96 Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and <= 75 A... | |
| Electromagnetic compatibility (EMC) Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena | |
| Electromagnetic compatibility (EMC) Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems | |
| Electromagnetic compatibility (EMC) Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and = 75 A per... | |
| Electromagnetic compatibility (EMC) Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase) | |
| Electromagnetic compatibility (EMC) Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase... | |
| Electromagnetic compatibility (EMC) Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <=16 A per phase and... | |
| Electromagnetic compatibility (EMC) Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current = 16 A per phase... | |
| Electromagnetic compatibility (EMC) Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests | |
| Electromagnetic compatibility (EMC) Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests | |
| Electromagnetic compatibility (EMC) Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test | |
| Electromagnetic compatibility (EMC) Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications | |
| Electromagnetic compatibility (EMC) Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz | |
| Electromagnetic compatibility (EMC) Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test | |
| Electromagnetic compatibility (EMC) Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test | |
| Electromagnetic compatibility (EMC) Part 4-19: Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at... | |
| Electromagnetic compatibility (EMC) Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series | |
| Electromagnetic compatibility (EMC) Part 4-20: Testing and measurement techniques - Emission and immunity testing in Transverse Electromagnetic (TEM) waveguides | |
| Electromagnetic compatibility (EMC) Part 4-21: Testing and measurement techniques - Reverberation chamber test methods | |
| Electromagnetic compatibility (EMC) Part 4-22: Testing and measurement techniques - Radiated emission and immunity measurements in fully anechoic rooms (FARs) | |
| Electromagnetic compatibility (EMC) Part 4-25: Testing and measurement techniques - HEMP immunity test methods for equipment and systems | |
| Electromagnetic compatibility (EMC) Part 4-27: Testing and measurement techniques - Unbalance, immunity test for equipment with input current not exceeding 16 A per phase | |
| Electromagnetic compatibility (EMC) Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test | |
| Electromagnetic compatibility (EMC) Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test | |
| Electromagnetic compatibility (EMC) Part 4-30: Testing and measurement techniques - Power quality measurement methods | |
| Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 24: Test methods for protective devices for HEMP conducted disturbance \x96 Basic EMC publication | |
| Equipment for monitoring of radionuclides in liquid effluents and surface waters | |
| Fibre optic branching devices - Part 1-1: Blank detail specification | |
| Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables Part 1-1: Blank detail specification | |
| Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables Part 1: Generic specification | |
| Fibre optic interconnecting devices and passive components - Fibre optic passive power control devices Part 1: Generic specification | |
| Fibre optic interconnecting devices and passive components - Fibre optic spatial switches Part 1: Generic specification | |
| Fibre optic interconnecting devices and passive components - Non-wavelength-selec tive fibre optic branching devices Part 1: Generic specification | |
| Filament lamps for road vehicles - Dimensional, electrical and luminous requirements | |
| Flickermeter - Functional and design specifications | |
| Flickermeter - Part 0: Evaluation of flicker severity | |
| GRAFCET specification language for sequential function charts | |
| Guidance information on the application of capacitors, resistors, inductors and complete filter units for electromagnetic interference suppression | |
| Guide for field measurements of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump turbines) | |
| Hard-drawn aluminium wire for overhead line conductors | |
| Helical-scan video tape cassette system using 8 mm magnetic tape (8 mm video) Part 4: Video subcode (VSC) | |
| Helical-Scan video tape cassette system using 8 mm magnetic tape - 8 mm Video - Part 3: High-band specifications for Hi 8 | |
| Helical-scan video tape cassette system using 8 mm magnetic tape - 8 mm Video Part 2: PCM multi-track audio system | |
| Helican-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type L | |
| Helican-Scan video tape cassette system using 8 mm magnetic tape - 8 mm Video Part 1: General specifications | |
| IEC 821 VMEbus - Microprocessor system bus for 1 byte to 4 byte data | |
| Induttori fissi per la soppressione delle interferenze elettromagnetiche - Parte 1: Specifica generale | |
| Induttori fissi per la soppressione delle interferenze elettromagnetiche - Parte 2-1: Specifica di dettaglio in bianco - Induttori per i quali sono richieste prove di sicurezza - (Livello D) | |
| Induttori fissi per la soppressione delle interferenze elettromagnetiche - Parte 2-2: Specifica di dettaglio in bianco - Induttori per i quali sono richieste (solo) prove di sicurezza | |
| Induttori fissi per la soppressione delle interferenze elettromagnetiche - Parte 2: Specifica settoriale | |
| Information technology equipment - Safety - Part 1: General requirements | |
| Information technology equipment - Safety - Part 21: Remote power feeding | |
| Information technology equipment - Safety - Part 22: Equipment to be installed outdoors | |
| Information technology equipment - Safety - Part 23: Large data storage equipment | |
| Information technology equipment - Safety Part 1: General requirements | |
| Information technology equipment - Safety Part 22: Equipment installed outdoors | |
| Insulated materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic... | |
| Insulating and sheathing materials of electric and optical cables - Common test methods - Part 1-4: General application - Tests at low temperature | |
| Insulating and sheathing materials of electric and optical cables - Common test methods - Part 2-1: Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion... | |
| Insulating and sheathing materials of electric and optical cables - Common test methods - Part 3-1: Methods specific to PVC compounds - Pressure test at high temperature - Tests for... | |
| Insulating and sheathing materials of electric and optical cables - Common test methods - Part 4-1: Methods specific to polyethylene and polypropylene compounds - Resistance to environmental stress cracking -... | |
| Insulating and sheathing materials of electric and optical cables - Part 1-3: General application - Methods for determining the density - Water absorption tests - Shrinkage test | |
| Insulating and sheathing materials of electric and optical cables - Part 1: General application - Section 1: Measurement of thickness and overall dimensions - Tests for determining the mechanical properties... | |
| Insulating and sheathing materials of electric and optical cables - Part 1: General application - Section 2: Thermal ageing methods | |
| Insulating and sheathing materials of electric and optical cables Common test methods - Part 3-2: Methods specific to PVC compounds - Loss of mass test - Thermal stability test | |
| Insulating and sheathing materials of electric and optical cables Common test methods - Part 5-1: Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature... | |
| Insulating and sheathing materials of electric and optical cables-Common test methods - Part 4-2: Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning... | |
| Insulating and sheathing materials of electric cables - Part 1: General application - Section 1: Measurement of thickness and overall dimension Test for determining the mechanical properties | |
| Insulating and sheathing materials of electric cables - Part 1: General application - Section 3: Methods for determining the density - Water absorption test - Shrinkage test | |
| Insulating and sheathing materials of electric cables - Part 1: General application - Section 4: Test at low temperature | |
| Insulating and sheathing materials of electric cables - Part 3: Methods specific to PVC compounds - Section 1: Pressure test at high temperature - Tests for resistance to cracking | |
| Insulating and sheathing materials of electric cables - Part 3: Methods specific to PVC compounds - Section 2: Loss of mass test - Thermal stability test | |
| Insulating and sheathing materials of electric cables - Part 5: Methods specific to filling compounds - Section 1: Drop point - Separation of oil - Lower temperature brittleness - Total... | |
| Insulating foam-filled tubes and solid rods for live working | |
| Insulating liquids - Methods for counting and sizing particles | |
| Insulating liquids - Oil-impregnated paper and pressboard - Determination of water by automatic coulometric Karl Fischer titration | |
| Insulating liquids - Specifications for unused liquids based on synthetic aromatic hydrocarbons | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy... | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine... | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester... | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone... | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide... | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-1: Specifications for individual materials - Types of industrial rigid laminated sheets | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins... | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins... | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins... | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins... | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins... | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins... | |
| Insulating poles (insulating sticks) and universal tool attachments (fittings) for live working | |
| Lamps for road vehicles - Dimensional, electrical and luminous requirements | |
| Lamps for road vehicles - Performance requirements | |
| le apparecchiature usate nei sistemi digitali di microonde stazioni di terra per satelliti di terra per la raccolta di notizie di attualit\xe0 via - Section 14: Earth stations for satellite... | |
| Live working - Conductive clothing for use at nominal voltage up to 800 kV AC and \xb1 600 kV DC | |
| Live working - Gloves of insulating material | |
| Live working - Hand tools for use up to 1 000 V a.c. and 1 500 V d.c. | |
| Live working - Hand tools for use up to 1 000 V AC and 1 500 V DC | |
| Live working - Insulating foam-filled tubes and solid rods Part 1: Tubes and rods of a circular cross-section | |
| Live working - Insulating sticks and attachable devices Part 1: Insulating sticks | |
| Live working - Insulating sticks and attachable devices Part 2: Attachable devices | |
| Low-voltage switchgear and controlgear - Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR) | |
| Low-voltage switchgear and controlgear - Part 1: General rules | |
| Low-voltage switchgear and controlgear - Part 2: Circuit-breakers | |
| Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements Electromechanical control circuit devices | |
| Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests | |
| Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function | |
| Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements Electrical emergency stop device with mechanical latching function | |
| Low-voltage switchgear and controlgear - Part 5-7: Control circuit devices and switching elements Requirements for proximity devices with analogue output | |
| Low-voltage switchgear and controlgear - Part 5-8: Control circuit devices and switching elements Three-position enabling switches | |
| Low-voltage switchgear and controlgear - Part 5-9: Control circuit devices and switching elements - Flow rate switches | |
| Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment | |
| Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS) | |
| Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors | |
| Low-voltage switchgear and controlgear - Part 7-3: Ancillary equipment - Safety requirements for fuse terminal blocks | |
| Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines | |
| Low-voltage switchgear and controlgear Part 1: General rules | |
| Low-voltage switchgear and controlgear Part 2: Circuit-breakers | |
| Low-voltage switchgear and controlgear Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units | |
| Low-voltage switchgear and controlgear Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters | |
| Low-voltage switchgear and controlgear Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters | |
| Low-voltage switchgear and controlgear Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads | |
| Low-voltage switchgear and controlgear Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices | |
| Low-voltage switchgear and controlgear Part 5-2: Control circuit devices and switching elements - Proximity switches | |
| Low-voltage switchgear and controlgear Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) | |
| Low-voltage switchgear and controlgear Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests | |
| Low-voltage switchgear and controlgear Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function | |
| Low-voltage switchgear and controlgear Part 6-1: Multiple function equipment - Transfer switching equipment | |
| Low-voltage switchgear and controlgear Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors | |
| Low-voltage switchgear and controlgear Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors | |
| Low-voltage switchgear and controlgear Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines | |
| Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results | |
| Medical electrical equipment - Medical electron accelerators - Functional performance characteristics | |
| Methods of measurement for equipment used in digital microwave radio transmission - systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section 1: General... | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section 2: Basic characteristics... | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section 3: Transmission characteristics... | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section 4: Transmission performance... | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 10: Overall system performance | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 1: General | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 2: Antenna | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 3: RF branching networks | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 4: Transmitter/receiver including modulator/demodulato r | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 5: Digital signal processing sub-system | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 6: Protection switching | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 7: Diversity switching and combining equipment | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 8: Adaptive equalizer | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 9: Service channels | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurement on satellite earth stations - Section 9: Terminal equipment SCPC-PSK | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 11: Service channel equipment for SCPC-PSK transmission | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 12: Overall system performance | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 1: General | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 2: Antenna | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 4: Low noise amplifier | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 5: Up- and down- converters | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 7: Figure-of-merit of receiving system | |
| Methods of measurement for equipment used in digital microwave radio transmission systems Part 3: Measurements on satellite earth stations Section 10: Terminal equipment \x96 TDMA traffic earth station | |
| Methods of measurement for equipment used in digital microwave radio transmission systems Part 3: Measurements on satellite earth stations | |
| Methods of measurement of touch current and protective conductor current | |
| Miniature lamps | |
| Miscellaneous lampholders - Part 2 : Particular requirements - Section 1: Lampholders S14 | |
| Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED modules | |
| Miscellaneous lampholders - Part 2: Particular requirements - Section 1: Lampholders S14 | |
| Miscellaneous lampholders Part 1: General requirements and tests | |
| Miscellaneous lampholders Part 2-2: Particular requirements - Connectors for LED-modules | |
| Miscellaneous lampholders Part 2-3: Particular requirements - Lampholders for double-capped linear LED lamps | |
| Miscellaneous lampholders Part 2-3: Particular requirements - Lampholders for doublecapped linear LED lamps | |
| Modular order for the development of mechanical structures for electronic equipment practices - Part 1: Generic standard | |
| Modular order for the development of mechanical structures for electronic equipment practices - Part 2-3: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Extended detail... | |
| Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice | |
| Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification - Interface co-ordinator dimensions for the 25 mm equipment practice - Section 2:... | |
| Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification \x96 Interface co-ordination dimensions for the 25 mm equipment practice - Section 1:... | |
| Modular order for the development of mechanical structures for electronic equipment practices Part 2-4: Sectional specification - Interface coordination dimensions for the 25 mm equipment practice - Adaptation dimensions for... | |
| Modular order for the development of mechanical structures for electronic equipment practices Part 2-5: Sectional specification - Interface coordination dimensions for the 25 mm equipment practice - Cabinet interface dimensions... | |
| Non-cellulosic papers for electrical purposes - Part 2: Methods of test | |
| Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Filled glass paper | |
| Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Hybrid inorganic-organic paper | |
| Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Aramid fibre paper containing not more than 50% mica particles | |
| Non-cellulosic papers for electrical purposes Part 1: Definitions and general requirements | |
| Non-cellulosic papers for electrical purposes Part 3: Specifications for individual materials Sheet 3: Unfilled aramid (aromatic polyamide) papers | |
| Nuclear power plants - Control rooms - Design | |
| Nuclear power plants - Control rooms - Supplementary control points for reactor shutdown without access to the main control room | |
| Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems | |
| Nuclear power plants - Instrumentation and control systems important to safety - Software aspects for computer-based systems performing category A functions | |
| Numeric keyboard for home electronic systems (HES) | |
| Optical fibre cables - Part 5: Sectional specification - Microduct cabling for installation by blowing | |
| Optical fibre cables Part 5-10: Family specification for outdoor microduct optical fibre cables, microducts and protected microducts for installation by blowing | |
| Optical fibre cables Part 5-20: Family specification - Outdoor microduct fibre units, microducts and protected microducts for installation by blowing | |
| Part 4: Professional applications | |
| Passive filter units for electromagnetic interference suppression - Part 1: Generic specification | |
| Passive filter units for electromagnetic interference suppression - Part 2: Sectional specification - Passive filter units for which safety tests are appropriate - Test methods and general requirements | |
| Passive filter units for electromagnetic interference suppression - Part 2: Sectional specification: Passive filter units for which safety tests are appropriate - Test methods and general requirements | |
| Passive filter units for electromagnetic interference suppression Part 3: Passive filter units for which safety tests are appropriate | |
| Photovoltaic devices - Part 1: Measurement characteristics - of - photovoltaic - current-voltage | |
| Photovoltaic devices - Part 9: Solar simulator performance requirements | |
| Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics | |
| Photovoltaic devices Part 1-1: Measurement of current-voltage characteristics of multi-junction photovoltaic (PV) devices | |
| Photovoltaic devices Part 10: Methods of linearity measurement | |
| Photovoltaic devices Part 2: Requirements for photovoltaic reference devices | |
| Photovoltaic devices Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data | |
| Photovoltaic devices Part 4: Reference solar devices - Procedures for establishing calibration traceability | |
| Photovoltaic devices Part 5: Determination of the equivalent cell temperature (ECT) of photovoltaic (PV) devices by the open-circuit voltage method | |
| Photovoltaic devices Part 7: Computation of the spectral mismatch correction for measurements of photovoltaic devices | |
| Photovoltaic devices Part 8-1: Measurement of spectral responsivity of multi-junction photovoltaic (PV) devices | |
| Photovoltaic devices Part 8: Measurement of spectral response of a photovoltaic (PV) device | |
| Pre-recorded optical reflective videodisk system - \x93Laser vision\x94 50 Hz/625 lines - PAL | |
| Pre-recorded optical reflective videodisk system \x93laser vision\x94 50 Hz/625 lines - PAL | |
| Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation Part 1: Portable workplace and environmental meters and monitors | |
| Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation Part 2: High range beta and photon dose and dose rate... | |
| Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test methods | |
| Radio frequency and coaxial cable assemblies - Part 2-2: Blank detail specification for flexible coaxial cable assemblies | |
| Radio frequency and coaxial cable assemblies - Part 3-2: Detail specification for semi-flexible coaxial cable assemblies for GSM use (0,8 GHz -1 GHz) | |
| Radio frequency and coaxial cable assemblies - Part 4-1: Blank detail specification for semi-rigid coaxial cable assemblies | |
| Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid coaxial cable assemblies | |
| Radio frequency and coaxial cable assemblies Part 2-1: Sectional specification for flexible coaxial cable assemblies | |
| Radio frequency and coaxial cable assemblies Part 2-3: Detail specification for flexible coaxial cable assemblies Frequency range 0 MHz to 1 000 MHz, IEC 61169-8 connectors | |
| Radio frequency and coaxial cable assemblies Part 2-4: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-2 connectors... | |
| Radio frequency and coaxial cable assemblies Part 2-5: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 1 000 MHz, IEC 61169-2 connectors... | |
| Radio frequency and coaxial cable assemblies Part 2-6: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-24 connectors... | |
| Radio frequency and coaxial cable assemblies Part 2-7: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-47 connectors... | |
| Radio frequency and coaxial cable assemblies Part 3-1: Blank detail specification for semi-flexible coaxial cable assemblies | |
| Radio frequency and coaxial cable assemblies Part 3: Sectional specification for semi-flexible coaxial cable assemblies | |
| Rules for steam turbine thermal acceptance tests - Part 1: Method A \x96 High accuracy for large condensing steam turbines | |
| Rules for steam turbine thermal acceptance tests - Part 2: Method B \x96 Wide range of accuracy for various types and sizes of turbines | |
| Rules for steam turbine thermal acceptance tests - Part 3: Thermal performance verification tests of retrofitted steam turbines | |
| Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information | |
| Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS) | |
| Safety of laser products - Part 4: Laser guards | |
| Safety of laser products \x96 Part 1: Equipment classification and requirements | |
| Safety of laser products Part 1: Equipment classification and requirements | |
| Safety of laser products Part 1: Equipment classification, requirements and user's guide | |
| Safety of laser products Part 2: Safety of optical fibre communication systems (OFCS) | |
| Safety of laser products Part 4: Laser guards | |
| Section 11: Cross-polarization interference canceller | |
| Self-ballasted lamps for general lighting services - Performance requirements | |
| Self-ballasted lamps for general lighting services - Safety requirements | |
| Short-circuit currents - Calculation of effects Part 1: Definitions and calculation methods | |
| Short-circuit currents in three-phase a.c systems Part 3: Currents during two separate simultaneous line-to-earth shortcircuits and partial short-circuit currents flowing through earth | |
| Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents | |
| Shunt capacitors for A.C. power systems having a rated voltage above 1 000 V Part 1: General | |
| Shunt capacitors for A.C. power systems having a rated voltage above 1 000 V Part 4: Internal fuses | |
| Shunt power capacitors of the non-self healing type for a.c. systems having a rated voltage up to and including 1 kV - Part 3: Internal fuses | |
| Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV - Part 1: General - Performance, testing and rating -... | |
| Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV - Part 2: Ageing test and destruction test | |
| Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V Part 1: General - Performance, testing and rating -... | |
| Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V Part 2: Ageing test, self-healing test and destruction test... | |
| Single-capped fluorescent lamps - Performance specifications | |
| Sleeves of insulating material for live working | |
| Sound systems for emergency purposes | |
| Specifications for unused silicone insulating liquids for electrotechnical purposes | |
| Standardization of interconnections between broadcasting transmitters or transmitter systems and supervisory equipment - Part 2: Interface standards for systems using data bus type interconnections | |
| Stationary lead-acid batteries - Part 11: Vented types - General requirements and methods of tests | |
| Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test | |
| Stationary lead-acid batteries - Part 22: Valve regulated types - Requirements | |
| Strumentazione per la radioprotezione - Rateometri per la misura e/o sorveglianza dell'equivalente di dose (rateo) ambiente e/o direzionale da radiazione beta, X e gamma | |
| Surface acoustic wave (SAW) filters of assessed quality Part 1: Generic specification | |
| Surface acoustic wave (SAW) filters of assessed quality Part 2: Guidance to the use | |
| Surface acoustic wave (SAW) filters of assessed quality Part 3: Standard outlines | |
| Telecontrol equipment and systems - Part 2: Operating conditions - Section 1: Power supply and electromagnetic compatibility | |
| Telecontrol equipment and systems - Part 2: Operating conditions - Section 2: Environmental conditions (climatic, mechanical and other non-electrical influences) | |
| Telecontrol equipment and systems - Part 5-101: Transmission protocols - Companion standard for basic telecontrol tasks | |
| Telecontrol equipment and systems - Part 5-104: Transmission protocols - Network access for IEC 60870-5-101 using standard transport profiles | |
| Telecontrol equipment and systems - Part 5: Transmission protocols - Section 102: Companion standard for the transmission of integrated totals in electric power systems | |
| Telecontrol equipment and systems - Part 5: Transmission protocols - Section 1: Transmission frame formats | |
| Telecontrol equipment and systems - Part 5: Transmission protocols - Section 2: Link transmission procedures | |
| Telecontrol equipment and systems - Part 5: Transmission protocols - Section 3: General structure of application data | |
| Telecontrol equipment and systems - Part 5: Transmission protocols - Section 4: Definition and coding of application information elements | |
| Telecontrol equipment and systems - Part 5: Transmission protocols - Section 5: Basic application functions | |
| Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Section 2: Use of basic standards (OSI layers 1-4) | |
| Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Section 501: TASE.1 Service definitions | |
| Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Section 502: TASE.1 Protocol definitions | |
| Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Section 601: Functional Profile for providing the Connection-Oriented Transport Service in End System... | |
| Telecontrol equipment and systems \x96 Part 5-104: Transmission protocols - Network access for IEC 60870-5- 101 using standard transport profiles | |
| Telecontrol equipment and systems Part 5-101: Transmission protocols - Companion standard for basic telecontrol tasks | |
| Telecontrol equipment and systems Part 5-104: Transmission protocols - Network access for IEC 60870-5-101 using standard transport profiles | |
| Telecontrol equipment and systems Part 5-6: Guidelines for conformance testing for the IEC 60870-5 companion standards | |
| Telecontrol equipment and systems Part 6-503: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 Services and protocol | |
| Telecontrol equipment and systems Part 6-701: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Functional profile for providing the TASE.1 application service in end systems | |
| Telecontrol equipment and systems Part 6-702: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Functional profile for providing the TASE.2 application service in end systems | |
| Telecontrol equipment and systems Part 6-802: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 Object models | |
| Telecontrol equipment and systems | |
| Teleprotection equipment of power system - Performance and testing - Part 1: Command system | |
| Winding wires - Test methods - Part 1: General | |
| Winding wires - Test methods - Part 3: Mechanical properties | |
| Winding wires - Test methods - Part 4: Chemical properties | |
| Winding wires - Test methods - Part 4: Chemical proprieties | |
| Winding wires - Test methods Part 1: General | |
| Winding wires - Test methods Part 2: Determination of dimensions | |
| Winding wires - Test methods Part 3: Mechanical properties | |
| Winding wires - Test methods Part 5: Electrical properties | |
| Winding wires - Test methods Part 6: Thermal properties |
| << Prev | Next >> |