Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
450
500
550
600
650
700
730
740
750
760
770
780
790
791
792
793
794
795
796
797
798
799
800
801
802
810
820
830
840
850
860
900
950
1000
1050
1100
1150
1500
1620
| Product Name | Notes |
|---|---|
| 12 V lithium-ion secondary batteries for automotive starting, lighting, ignition (SLI) applications and auxiliary purposes \x96 Part 1: General requirements and methods of test | |
| Application of risk management for IT-networks incorporating medical devices Part 1: Safety, effectiveness and security in the implementation and use of connected medical devices or connected health software | |
| Asset Administration Shell for industrial applications - Part 1: Asset Administration Shell structure | |
| Assistive listening devices and systems for active assisted living Part 1: General | |
| Automatic floor treatment machines for commercial use - Particular requirements | |
| Bi-directional grid-connected power converters Part 1: General requirements | |
| Bi-directional grid-connected power converters Part 2: Interface of GCPC and distributed energy resources | |
| Building intercom systems Part 2: Requirements for advanced security building intercom systems (ASBIS) | |
| Building intercom systems Part 3-1: Application guidelines - General | |
| Building intercom systems Part 3-2: Application guidelines - Advanced security building intercom systems (ASBIS) | |
| Cable management systems - Test method for content of halogens | |
| Calibration of tuneable laser sources | |
| Car multimedia systems and equipment - Drive monitoring system Part 2: Recording methods of the drive monitoring system | |
| Cause and Effect Matrix | |
| Classification of magnetic powder cores | |
| Composite hollow core station post insulators for substations with a.c. voltage greater than 1000 V and d.c. voltage greater than 1500 V - Definitions, test methods and acceptance criteria | |
| Concentrator photovoltaic (CPV) modules and assemblies - Safety qualification | |
| Concentrator photovoltaic (CPV) solar cells and cell on carrier (CoC) assemblies - Qualification | |
| Conductors for overhead lines - Aluminium and aluminium alloy wires for concentric lay stranded conductors | |
| Conductors for overhead lines - Coated or cladded metallic wire for concentric lay stranded conductors | |
| Configurable Car Infotainment Service (CCIS) Part 1: General | |
| Configurable car infotainment services (CCIS) Part 2: Requirements | |
| Configurable car infotainment services (CCIS) Part 3: Framework | |
| Connectors for electrical and electronic equipment - Shielded or unshielded free and fixed connectors for balanced single-pair data transmission with current-carrying capacity - General requirements and tests | |
| Connectors for electrical and electronic equipment Part 1: Detail specification for two-way, shielded or unshielded, free and fixed connectors - Mechanical mating information, pin assignment and additional requirements for Type... | |
| Connectors for electrical and electronic equipment Part 6: Detail specification for 2-way and 4-way (data/power), shielded, free and fixed connectors for power and data transmission with frequencies up to 600... | |
| Connettori per apparecchiature elettriche ed elettroniche Parte 5: Specifica di dettaglio per connettori circolari M8 ed M12 a 2 vie, schermati o non schermati, fissi e mobili \x96 Informazioni di... | |
| Connettori per radiofrequenza multicanale Parte 1: Specifica generale - Requisiti generali e metodi di prova | |
| Content management - Monitoring and management of personal digital content | |
| Data container format for wearable sensor | |
| Dedicated radionuclide imaging devices - Characteristics and test conditions Part 1: Cardiac SPECT | |
| Dependability reviews during the life cycle | |
| Desktop and notebook computers - Measurement of energy consumption | |
| Determination of inrush current characteristics of lighting products | |
| Device embedding assembly technology \x96 Part 2-603: Guideline for stacked electronic module - Test method of intra-module electrical connectivity | |
| Device embedding assembly technology Part 1: Generic specification for device embedded substrates | |
| Device embedding assembly technology Part 2-5: Guidelines - Implementation of a 3D data format for device embedded substrate | |
| Device embedding assembly technology Part 2-602: Guideline for stacked electronic module - Evaluation method of intermodule electrical connectivity | |
| Dielectric and resistive properties of solid insulating materials \x96 Part 2-3: Relative permittivity and dissipation factor - Contact electrode method for insulating films - AC methods | |
| Dielectric and resistive properties of solid insulating materials \x96 Part 3-12: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - Method for casting resins | |
| Dielectric and resistive properties of solid insulating materials Part 2-1: Relative permittivity and dissipation factor - Technical frequencies (0,1 Hz to 10 MHz) - AC Methods | |
| Dielectric and resistive properties of solid insulating materials Part 2-2: Relative permittivity and dissipation factor - High frequencies (1 MHz to 300 MHz) - AC methods | |
| Dielectric and resistive properties of solid insulating materials Part 3-11: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - Method for impregnation and coating materials | |
| Dielectric and resistive properties of solid insulating materials Part 3-1: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - General method | |
| Dielectric and resistive properties of solid insulating materials Part 3-4: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity at elevated temperatures | |
| Dynamic on-resistance test method guidelines for GaN HEMT based power conversion devices | |
| E-Transporter \x96 Part 3-2: Performance test methods for mobility of cargo e-Transporters | |
| E-Transporters - Part 1: Terminology and classification | |
| E-Transporters \x96 Part 2.1: Safety requirements and test methods for personale e-Transporters | |
| Electric clothes washer-dryers for household use - Methods for measuring the performance | |
| Electric clothes washer-dryers for household use - Methods of measuring the performance | |
| Electric dishwashers for commercial use - Test methods for measuring the performance | |
| Electric double-layer capacitors for use in hybrid electric vehicles - Test methods for electrical characteristics | |
| Electric energy storage (EES) systems \x96 Part 4-2: Guidance on environmental issues - Assessment of the environmental impact of battery failure in an electrochemical based storage system | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety \x96 Part 2-6: Particular requirements for hand-held hammers | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety \x96 Part 2-7: Particular requirements for hand-held spray guns | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety \x96 Part 4-6: Particular requirements for garden blowers, garden vacuums and garden blower/vacuums | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety Part 2-3: Particular requirements for hand-held grinders, disc-type polishers and disc-type sanders | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety Part 2: Particular requirements for hand-held hammers | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety Part 3-5: Particular requirements for transportable band saws | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety Part 3: Particular requirements for transportable mitre saws | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety Part 3: Particular requirements for transportable wall saws | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety Part 4: Particular requirements for grass shears | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety Part 4: Particular requirements for pedestrian controlled walk-behind lawn scarifiers and aerators | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety Part 4: Particular requirements for pedestrian controlled walk-behind lawnmowers | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety - Part 4: Particular requirements for grass shears | |
| Electric vehicle battery swap system \x96 Part 1: General and guidance | |
| Electric vehicle battery swap system Part 2: Safety requirements | |
| Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 Hz) Part 1: Product family standard | |
| Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 Hz) Part 3: Resistance welding equipment | |
| Electrical accessories - Methodology for determining the energy efficiency class of electrical accessories | |
| Electrical and electronic household and office equipment Measurement of networked standby power consumption of edge equipment | |
| Electrical energy storage (EES) systems \x96 Part 5-1: Safety considerations for grid-integrated EES systems - General specification | |
| Electrical Energy Storage (EES) systems Part 1: Vocabulary | |
| Electrical energy storage (EES) systems Part 2-1: Unit parameters and testing methods - General specification | |
| Electrical energy storage (EES) systems Part 5-2: Safety requirements for grid-integrated EES systems - Electrochemical-base d systems | |
| Electrical household and similar cooling and freezing appliances - Food preservation | |
| Electrical installations for lighting and beaconing of aerodromes - Connecting devices - General requirements and tests | |
| Electrical relays - Testing and measurement \x96 Part 27: Electrical contact noise | |
| Electrical relays - Testing and measurement \x96 Part 38: Mechanical interlock | |
| Electrical relays - Tests and measurement \x96 Part 28: Thermoelectric electromotive force (e.m.f.) | |
| Electrical relays - Tests and measurements - Part 11: Enclosure protection and degree of protection | |
| Electrical relays - Tests and measurements - Part 14: Mould growth | |
| Electrical relays - Tests and measurements \x96 Part 12: Internal moisture | |
| Electrical relays - Tests and measurements \x96 Part 13: Corrosive atmospheres due to sulfur impact | |
| Electrical relays - Tests and measurements \x96 Part 15: Robustness of terminals | |
| Electrical relays - Tests and measurements \x96 Part 16: Soldering | |
| Electrical relays - Tests and measurements \x96 Part 17: Shock, acceleration and vibration | |
| Electrical relays - Tests and measurements \x96 Part 18: Thermal resistance of the coil | |
| Electrical relays - Tests and measurements \x96 Part 20: Mechanical endurance | |
| Electrical relays - Tests and measurements \x96 Part 22: Limiting continuous current | |
| Electrical relays - Tests and measurements \x96 Part 24: Load transfer | |
| Electrical relays - Tests and measurements \x96 Part 32: Acoustic nois | |
| Electrical relays - Tests and measurements \x96 Part 35: Resistance to cleaning solvents | |
| Electrical relays - Tests and measurements \x96 Part 36: Fire hazard | |
| Electrical relays - Tests and measurements \x96 Part 37: Terminal temperature rise at rated load | |
| Electrical relays - Tests and measurements \x96 Part 39: Insertion and withdrawal force | |
| Electrical relays - Tests and measurements \x96 Part 40: Short circuit testing | |
| Electrical relays - Tests and measurements \x96 Part 44: Corrosive atmosphere due to salt mist | |
| Electrical relays - Tests and measurements \x96 Part 48: Contact failure rate test | |
| Electrical relays - Tests and measurements \x96 Part 49: Long term stability of sealing | |
| Electrical relays - Tests and measurements \x96 Part 56: Ball Pressure test | |
| Electrical relays - Tests and measurements \x96 Part 5: Insulation resistance | |
| Electrical relays - Tests and measurements \x96 Part 6: Contact-circuit resistance or voltage drop | |
| Electrical relays - Tests and measurements \x96 Part 7: Functional tests | |
| Electrical relays - Tests and measurements \x96 Part 8: Timing | |
| Electrical relays - Tests and measurements \x96 Part 9: Climatic tests | |
| Electrically operated spray toilet seat for household and similar use - Methods for measuring the performance - General test methods of spray seats | |
| Electrically operated toothbrushes - Method for measuring performance | |
| Electrolyte and water for vented lead acid accumulators - Part 1: Requirements for electrolyte | |
| Energy consumption of vending machines | |
| Energy efficiency systems - Simple external consumer display | |
| Engineering data exchange format for use in industrial automation systems engineering - Automation markup language Part 1: Architecture and general requirements | |
| Engineering data exchange format for use in industrial automation systems engineering - Automation markup language Part 2: Semantics libraries | |
| Engineering data exchange format for use in industrial automation systems engineering - Automation markup language Part 4: Logic | |
| Engineering data exchange format for use in industrial automation systems engineering - Automation markup language Part 5: Communication | |
| Extended thermal cycling of PV modules - Test procedure | |
| Ferrite cores - Guidelines on dimensions and the limits of surface irregularities \x96 Part 13: PQ-cores | |
| Ferrite cores - Guidelines on dimensions and the limits of surface irregularities Part 10: PM-cores and associated parts | |
| Ferrite cores - Guidelines on dimensions and the limits of surface irregularities Part 12: Ring-cores | |
| Ferrite cores - Guidelines on dimensions and the limits of surface irregularities Part 13: PQ-cores | |
| Ferrite cores - Guidelines on dimensions and the limits of surface irregularities Part 14: EFD-cores | |
| Ferrite cores - Guidelines on dimensions and the limits of surface irregularities Part 1: General specification | |
| Ferrite cores - Guidelines on dimensions and the limits of surface irregularities Part 2: Pot-cores for use in telecommunications, power supply, and filter applications | |
| Ferrite cores - Guidelines on dimensions and the limits of surface irregularities Part 3: Half pot-cores made of ferrite for inductive proximity switches | |
| Ferrite cores - Guidelines on dimensions and the limits of surface irregularities Part 4: RM-cores | |
| Ferrite Cores - Guidelines on dimensions and the limits of surface irregularities Part 5: EP-Cores and associated parts for use in inductors and transformers | |
| Ferrite Cores - Guidelines on dimensions and the limits of surface irregularities Part 6: ETD-Cores for use in Power Supplies | |
| Ferrite cores - Guidelines on dimensions and the limits of surface irregularities Part 7: EER-cores | |
| Ferrite cores - Guidelines on dimensions and the limits of surface irregularities Part 8: E-crores | |
| Ferrite cores - Guidelines on dimensions and the limits of surface irregularities Part 9: Planar cores | |
| Ferrite cores - Guidelines on dimensions and the limits of surgace irregularities Part 11: EC-cores for use in power supply applications | |
| Fibre optic interconnecting devices and passive components - Connector optical interfaces for enhanced macro bend multimode fibre \x96 Part 2-2: Connection parameters of physically contacting 50 \xb5m core diameter fibres... | |
| Fibre optic interconnecting devices and passive components - Connector optical interfaces for enhanced macro bend multimode fibres \x96 Part 2-1: Connection parameters of physically contacting 50 \xb5m core diameter fibres-... | |
| Fibre optic interconnecting devices and passive components - Fibre optic tuneable bandpass filters - Generic specification | |
| Fibre optic interconnecting devices and passive components Fibre optic connector optical interfaces Part 1: Enhanced macro bend loss multimode 50 \xb5m core diameter fibres - General and guidance | |
| Fibre optics - Multimode launch condition Part 1: Launch condition requirements for measuring multimode attenuation | |
| Fidatezza dei sistemi aperti | |
| Field device integration (FDI) Part 100: Profiles - Generic protocols | |
| Field device Integration (FDI) Part 101-1: Profiles - Foundation Fieldbus H1 | |
| Field Device Integration (FDI) Part 101-2: Profiles - Foundation Fieldbus HSE | |
| Field Device Integration (FDI) Part 103-1: Profiles - PROFIBUS | |
| Field Device Integration (FDI) Part 103-4: Profiles - PROFINET | |
| Field Device Integration (FDI) Part 109-1: Profiles - HART and WirelessHART | |
| Field device integration (FDI) Part 115-2: Profiles \x96 Modbus \x96 RTU | |
| Field device integration (FDI) Part 150-1: Profiles - ISA100 WIRELESS | |
| Field Device Integration (FDI) Part 151-1: Profiles - OPC UA | |
| Field Device Integration (FDI) Part 1: Overview | |
| Field Device Integration (FDI) Part 2: FDI Client | |
| Field Device Integration (FDI) Part 3: Server | |
| Field Device Integration (FDI) Part 4: FDI Packages | |
| Field Device Integration (FDI) Part 5: Information Model | |
| Field Device Integration (FDI) Part 6-100: Technology Mapping - .Net | |
| Field Device Integration (FDI) Part 6-200: Technology Mapping - HTML5 | |
| Field Device Integration (FDI) Part 6: Technology Mapping | |
| Field Device Integration (FDI) Part 7: Communication Devices | |
| Field Device Integration (FDI\xae) Part 102-2: Profiles - EtherNet/IP | |
| Field device tool (FDT) interface specification Part 2: Concepts and detailed description | |
| Field device tool (FDT) interface specification Part 303-1: Communication profile integration - IEC 61784 CP 3/1 and CP 3/2 | |
| Field device tool (FDT) interface specification Part 309: Communication profile integration - IEC 61784 CPF 9 | |
| Flexible organic light emitting diode (OLED) panels for general lighting - Performance requirements | |
| Flow battery energy systems for stationary applications Part 1: Terminology and general aspects | |
| Flow battery energy systems for stationary applications Part 2-1: Performance general requirements and test methods | |
| Flow battery energy systems for stationary applications Part 2-2: Safety requirements | |
| Fluids for electrotechnical application - Specification of gases alternative to SF6 to be used in electrical power equipment | |
| Fluids for electrotechnical applications - Unused natural esters for transformers and similar electrical equipment | |
| Good refurbishment practices for medical imaging equipment | |
| Grid integration of renewable energy generation - Terms and definitions | |
| Guidance for installation procedures and tolerances of hydroelectric machines Part 1: General aspects | |
| Guidance for installation procedures and tolerances of hydroelectric machines Part 2: Vertical generators | |
| Guidance for installation procedures and tolerances of hydroelectric machines Part 4: Vertical Kaplan or propeller turbines | |
| Guidance for installation procedures and tolerances of hydroelectric machines Part 5: Bulb turbines and generators | |
| Guidance for installation procedures and tolerances of hydroelectric machines Part 6: Vertical Pelton turbines | |
| Guidance on human aspects of dependability | |
| Guide for installation procedures and tolerances of hydroelectric machines Part 3: Vertical Francis turbine or pump-turbine | |
| Guidelines for the measurement method of power durability for surface acoustic wave (SAW) and bulk acoustic wave (BAW) devices in radio frequency (RF) applications | |
| Heat shrinkable low and medium voltage moulded shapes Part 1: General requirements | |
| Heat shrinkable low and medium voltage moulded shapes Part 2 Methods of test | |
| Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 103: Heatshrinkable, polyolefin, conductive moulded shapes for medium voltage applications | |
| Heat-shrinkable low and medium voltage moulded shapes Part 3: Specification for individual materials - Sheet 101: Heat-shrinkable, polyolefin moulded shapes for low voltage applications | |
| Heat-shrinkable low and medium voltage moulded shapes Part 3: Specification for individual materials - Sheet 102: Heat-shrinkable, polyolefin, anti-tracking moulded shapes for medium voltage applications | |
| High-temperature secondary batteries Part 1: General requirements | |
| High-temperature secondary batteries Part 2: Safety requirements and tests | |
| High-temperature secondary batteries Part 3: Sodium-based batteries - Performance requirements and tests | |
| Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) \x96 Part 3: Electrical safety requirements | |
| Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) \x96 Part 5-1: EMC requirements, conditions and test set-up | |
| Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) \x96 Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light-industrial environments | |
| Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) \x96 Part 5-3: EMC requirements for HBES/BACS used in industrial environments | |
| Home and building electronic systems (HBES) and building automation and control systems (BACS) \x96 Part 6: Requirements for planning and installation | |
| Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) Part 3: Electrical safety requirements | |
| Home and building electronic systems (HBES) and building automation and control systems (BACS) Part 4: General functional safety requirements for products intended to be integrated in HBES and BACS | |
| Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) Part 5-1: EMC requirements, conditions and test set-up | |
| Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light-industrial environments | |
| Home and building electronic systems (HBES) and building automation and control systems (BACS) Part 5-3: EMC requirements for HBES/BACS used in industrial environments | |
| Horticultural lighting - LED packages for horticultural lighting \x96 Part 1: Specification sheet | |
| Horticultural lighting - LED packages for horticultural lighting \x96 Part 2: Binning | |
| Household and similar electrical air cleaning appliances - Methods for measuring the performance - Part 1: General requirements | |
| Household and similar electrical air cleaning appliances - Methods for measuring the performance \x96 Part 2-1: Particular requirements for determination of reduction of particles | |
| Household and similar electrical air cleaning appliances - Methods for measuring the performance Part 1: Genereal requirements | |
| Household and similar electrical appliances - Accessibility of control elements, doors, lids, drawers and handles | |
| Household and similar electrical appliances - Product information properties Part 1: Fundamentals | |
| Household electric instantaneous water heaters - Methods for measuring the performance Part 1: General aspects | |
| Household electric instantaneous water heaters - Methods for measuring the performance Part 2: Efficiency of single point of use electric instantaneous water heaters | |
| Household electric instantaneous water heaters - Methods for measuring the performance Part 2: Multifunctional electric instantaneous water heaters | |
| Human machine interfaces for process automation systems | |
| Hybrid insulators for a.c. and d.c. for high-voltage applications greater than 1 000 V AC and 1 500 V DC - Definitions, test methods and acceptance criteria | |
| In-cable control and protection device (IC-CPD) for mode 2 charging of electric road vehicles | |
| Industrial facility energy management system (FEMS) - Functions and information flows | |
| Industrial networks - Coexistence of wireless systems Part 2: Coexistence management | |
| Industrial networks - Coexistence of wireless systems Part 3: Formal description of the automated coexistence management and application guidance | |
| Industrial networks - Coexistence of wireless systems Part 4: Coexistence management with central coordination of wireless applications | |
| Industrial non-destructive testing equipment - Electron linear accelerator | |
| Industrial process measurement, control and automation - Digital nameplate | |
| Industrial-process control systems - Recorders - Testing and performance evaluation | |
| Industrial-process measurement, control and automation - Digital factory framework Part 1: General principles | |
| Industrial-process measurement, control and automation - Digital factory framework Part 2: Model elements | |
| Industrial-process measurement, control and automation - Digital Factory framework Part 3: Application of Digital Factory for life cycle management of production systems | |
| Industrial-process measurement, control and automation - Life-cycle management for systems and components | |
| Industrial-process measurement, control and automation Part 2: Internet of Things (IoT) - Application framework for industrial facility demand response energy management | |
| Information exchange for electric vehicle charging roaming service Part 1: General | |
| Information exchange for electric vehicle charging roaming service Part 2: Use cases | |
| Installations for electroheating and electromagnetic processing - Test methods for induction through-heating installations | |
| Insulating liquids - Test methods for the determination of interfacial tension of insulating liquids - Determination with the ring method | |
| Insulating liquids - Unused modified or blended esters for electrotechnical applications | |
| Intelligent device management \x96 Part 2: Requirements and recommendations | |
| Interoperability specifications and communication method for external power supplies used with computing and consumer electronics devices | |
| Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones | |
| Junction boxes for photovoltaic modules - Safety requirements and tests | |
| Lavastoviglie elettriche per uso commerciale - Metodi di prova per la misura delle prestazioni | |
| LCD multi-screen display terminals Part 2: Measuring methods | |
| Lead-acid batteries for propulsion power of lightweight vehicles - General requirements and methods of test | |
| LED light source characteristics \x96 Part 2: Design parameters and values | |
| LED light source characteristics Part 1: Data sheets | |
| LED packages - Long-term luminous and radiant flux maintenance projection | |
| LED packages - Long-term luminous, radiant and photon flux maintenance projection | |
| LED packages for general lighting - Specification sheet | |
| Lighting control interface for dimming - Analogue voltage dimming interface for electronic current sourcing controlgear | |
| Lighting control interface for dimming - Analoque voltage dimming interface for electronic current sourcing controlgear | |
| Lighting equipment - Non-active mode power measurement | |
| Lightning density based on lightning location systems (LLS) - General principles | |
| Lightning protection system components (LPSC) - Part 3: Requirements for isolating spark gaps (ISGs) | |
| Lightning protection system components (LPSC) - Part 5: Requirements for earth electrode inspection housings and earth electrode seals | |
| Lightning protection system components (LPSC) Part 2: Requirements for conductors and earth electrodes | |
| Lightning protection system components (LPSC) Part 6: Requirements for lightning strike counters (LSC) | |
| Lightning protection system components (LPSC) Part 7: Requirements for earthing enhancing compounds | |
| Lithium ion capacitors for use in electric and electronic equipment - Test methods for electrical characteristics | |
| Live working - Eye, face and head protectors against the effects of electric arc - Performance requirements and test methods | |
| Live working - Eye, face and head protectors against the effects of electric arc Performance requirements and test methods | |
| Low resistance measurements - Methods and guidance | |
| Low-voltage switchgear and controlgear - Product data and properties for information exchange - Engineering data \x96 Part 2-3: Functional safety and reliability | |
| Luminaire performance \x96 Part 2-1: Particular requirements - LED luminaires | |
| Luminaire performance Part 1: General requirements | |
| Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities Part 2: Ring-cores | |
| Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities Part 3: E-cores | |
| Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities Part 4: Block-cores | |
| Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities Part 5: Cylinder-cores | |
| Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities Part1: General specification | |
| Magnetic resonance equipment for medical imaging Part 1: Determination of essential image quality parameters | |
| Management and Interfaces for WPT - Device to device wireless charging (D2DWC) for mobile devices with wireless power TX/RX module | |
| Management of alarm systems for the process industries | |
| Maritime navigation and radiocommunication equipment and systems - Automatic Identification Systems (AIS) - SAR Airborne equipment - Operational and performance requirements, methods of test and required test results | |
| Maritime navigation and radiocommunication equipment and systems - Bridge alert management Part 1: Operational and performance requirements, methods of testing and required test results | |
| Maritime navigation and radiocommunication equipment and systems - Bridge alert management Part 2: Alert and cluster identifiers and other additional features | |
| Maritime navigation and radiocommunication equipment and systems - Cybersecurity - General requirements, methods of testing and required test results | |
| Maritime navigation and radiocommunication equipment and systems - Data interface Part 1: S-421 route plan based on S-100 | |
| Maritime navigation and radiocommunication equipment and systems - Maritime survivor locating devices (man overboard devices) - Minimum requirements, methods of testing and required test results | |
| Material declaration for products of and for the electrotechnical industry | |
| Measurement methods of blue light characteristics and related optical performance for visual display terminals | |
| Measurement of internal electric field in insulating materials - Pressure wave propagation method | |
| Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method | |
| Measurement procedures for materials used in photovoltaic modules - Part 2-1: Polymeric materials - Frontsheet and backsheet - Safety requirements | |
| Measurement procedures for materials used in photovoltaic modules Part 1-7: Encapsulants - Test procedure of optical durability | |
| Measurement procedures for materials used in photovoltaic modules Part 5-1: Edge seals - Suggested test methods for use with edge seal materials | |
| Measurement procedures for materials used in photovoltaic modules Part 6-2: General tests - Moisture permeation testing with polymeric materials | |
| Measurement procedures of magnetic field levels generated by electronic and electrical equipment in the automotive environment with respect to human exposure Part 1: Low-frequency magnetic fields | |
| Measurement techniques of piezoelectric, dielectric and electrostatic oscillators Part 3: Frequency aging test methods | |
| Measurement techniques of piezoelectric, dielectric and electrostatic oscillators Part 4: Short-term frequency stability test methods | |
| Mechanical structures for electrical and electronic equipment - Aisle containment for IT cabinets Part 1: Dimensions and mechanical requirements | |
| Mechanical structures for electrical and electronic equipment - Aisle containment for IT cabinets Part 2: Details of air flow, air separation and air cooling requirements | |
| Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series Part 2: Method for the determination of forced air... | |
| Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series Part 6: Air recirculation and bypass of indoor cabinets... | |
| Medical electrical equipment - Medical image display systems Part 2: Acceptance and constancy tests for medical image displays | |
| Medical electrical equipment - Medical light ion beam equipment - Performance characteristics | |
| Medical electrical equipment \x96 Part 2-26: Particular requirements for the basic safety and essential performance of electroencephalograp hs | |
| Medical electrical equipment Part 2: Particular requirements for the basic safety and essential performance of electroencephalograp hs | |
| Methods for calculating size specific dose estimate (SSDE) on computed tomography | |
| Methods of measurement and declaration of the detection range of detectors - Passive infrared detectors for major and minor motion detection | |
| Microspeakers | |
| Monitoring and measuring systems used for data collection, aggregation and analysis \x96 Part 1: Device requirements | |
| Multi-channel radio frequency connectors Part 3: Sectional specification for MQ5 series circular connectors | |
| Multi-channel radio-frequency connectors Part 2: Sectional specification for MQ4 series circular connectors | |
| Multimedia systems and equipment for vehicles - Surround view system Part 1: General | |
| Multimedia systems and equipment for vehicles - Surround view system Part 4: Application for camera monitor systems | |
| Nuclear instrumentation - Data format for list mode digital data acquisition used in radiation detection and measurement | |
| Nuclear power plants - Control rooms - Computer-based procedures | |
| Nuclear power plants - Control rooms - Requirements for emergency response facilities | |
| Nuclear power plants - Electrical power system - General requirements | |
| Nuclear power plants - Electrical power systems - Electrical power systems analysis | |
| Nuclear power plants - Instrumentation and control important to safety - Management of ageing of electrical cabling systems | |
| Nuclear power plants - Instrumentation and control systems - Requirements for coordinating safety and cybersecurity | |
| Nuclear power plants - Instrumentation and control systems important to safety - Development of HDL-programmed integrated circuits - Part 2: HDL-programmed integrated circuits for systems performing category B or C... | |
| Nuclear power plants - Instrumentation and control systems important to safety - Selection and use of wireless devices | |
| Nuclear power plants - Instrumentation, control and electrical power systems - Cybersecurity requirements | |
| OPC Unified Architecture \x96 Part 15: Safety | |
| OPC Unified Architecture Part 10: Programs | |
| OPC Unified Architecture Part 11: Historical Access | |
| OPC unified architecture Part 12: Discovery and global services | |
| OPC Unified Architecture Part 13: Aggregates | |
| OPC Unified Architecture Part 14: PubSub | |
| OPC unified architecture Part 3: Address Space Model | |
| OPC Unified Architecture Part 4: Services | |
| OPC Unified Architecture Part 5: Information Model | |
| OPC Unified Architecture Part 6: Mappings | |
| OPC unified architecture Part 7: Profiles | |
| OPC Unified Architecture Part 8: Data Access | |
| OPC Unified Architecture Part 9: Alarms and conditions | |
| Open Charge Point Protocol (OCPP) | |
| Optical circuit boards - Basic test and measurement procedures Part 2-5: Flexibility test for flexible opto-electric circuits | |
| Optical circuit boards Part 4-1: Interface standards - Terminated waveguide OCB assembly using single-row twelvechannel PMT connectors | |
| Optical circuit boards Part 4-214: Interface standards - Terminated waveguide OCB assembly using a single-row thirty-two-channel PMT connector | |
| Organic light emitting diode (OLED) light sources for general lighting - Safety \x96 Part 2-1: Particular requirements - Semi-integrated OLED modules | |
| Organic light emitting diode (OLED) light sources for general lighting - Safety \x96 Part 2-2: Particular requirements - Integrated OLED modules | |
| Organic light emitting diode (OLED) light sources for general lighting - Safety \x96 Part 2-3: Particular requirements - Flexible OLED tiles and panels | |
| Organic light emitting diode (OLED) light sources for general lighting - Safety \x96 Part 2-4: Particular requirements - Rigid OLED tiles and panels | |
| Organic light emitting diode (OLED) Light sources for general lighting - Safety Part 1: General requirements and tests | |
| Organic light emitting diode (OLED) light sources for general lighting - Safety Part 2-1: Particular requirements for semi-integrated OLED modules | |
| Organic Light Emitting Diode (OLED) light sources for general lighting - Safety Part 2-2: Particular requirements - Integrated OLED modules | |
| Organic light emitting diode (OLED) light sources for general lighting - Safety Part 2-3: Particular requirements - Flexible OLED tiles and panels | |
| Organic light emitting diode (OLED). Light sources for general lighting - Safety \x96 Part 1: General requirements and tests | |
| Parasitic communication protocol for radio-frequency wireless power transmission | |
| Particular requirements for load-shedding equipment(LSE) | |
| Particular requirements for source switching equipment (SSE) | |
| Pelton hydraulic turbines - Model acceptance tests | |
| Personal e-Transporters \x96 Part 3-1: Test method for total run time of e-scooter with consideration to environmental conditions of actual use | |
| Photobiological safety of lamps and lamp systems \x96 Part 7: Light sources and luminaires primarily emitting visible radiation | |
| Photobiological safety of lamps and lamp systems. Part 7: Light sources and luminaires primarily emitting visible radiation | |
| Photovoltaic (PV) arrays - Earth fault protection equipment - Safety and safety-related functionality | |
| Photovoltaic (PV) modules - Non-uniform snow load testing | |
| Photovoltaic (PV) modules - Transportation testing Part 1: Transportation and shipping of module package units | |
| Photovoltaic (PV) systems - Requirements for testing, documentation and maintenance Part 2: Grid connected systems - Maintenance of PV systems | |
| Photovoltaic cells Part 1: Measurement of light-induced degradation of crystalline silicon photovoltaic cells | |
| Photovoltaic power systems DC arc detection and interruption | |
| Piezoelectric sensors Part 1: Generic specifications | |
| Piezoelectric sensors Part 2: Chemical and biochemical sensors | |
| Piezoelectric sensors Part 3: Physical sensors | |
| Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-Systems) Part 1: General requirements | |
| Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-systems) Part 2: Dimensional compatibility and interchangeability requirements for accessories to be used by various types of ships | |
| Portable multimedia equipment - Determination of battery duration \x96 Part 2: Headphones and earphones with active noise cancelling functions | |
| Portable multimedia equipment - Determination of battery duration Part 1: Powered loudspeaker equipment | |
| Power frequency overvoltage protective devices (POPs) for household and similar applications | |
| Power line communication systems for power utility applications Part 3: Digital Power Line Carrier (DPLC) terminals and hybrid ADPLC terminals | |
| Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 2: Modular multilevel converters | |
| Predictive maintenance of industrial automation equipment and systems \x96 Part 1: General requirements | |
| Process management for avionics - Counterfeit prevention \x96 Part 1: Avoiding the use of counterfeit, fraudulent and recycled electronic components | |
| Process management for avionics - counterfeit prevention part 1: Avoiding the use of counterfeit, fraudulent and recycled electronic components | |
| Process management for avionics - counterfeit prevention part 2: managing electronic components from nin-franchised sources | |
| Process management for avionics - Counterfeit prevention Part 2: Managing electronic components from non-franchised sources | |
| Product category rules for life cycle assessment of electrical and electronic products and systems | |
| Protection against lightning - Thunderstorm warning systems | |
| Protocol for management of electric vehicles charging and discharging infrastructures Part 1: Basic definitions, use cases and architectures | |
| Qi Specification version 2.0 - Part 10: MPP System Specification | |
| Qi Specification version 2.0 - Part 11: MPP Communications Protocol | |
| Qi Specification version 2.0 - Part 1: Introduction | |
| Qi Specification version 2.0 - Part 2: Glossary | |
| Qi Specification version 2.0 - Part 3: Mechanical, Thermal and User Interface | |
| Qi Specification version 2.0 - Part 4: Power Delivery | |
| Qi Specification version 2.0 - Part 5: Communications Physical Layer | |
| Qi Specification version 2.0 - Part 6: Communications Protocol | |
| Qi Specification version 2.0 - Part 7: Foreign Object Detection | |
| Qi Specification version 2.0 - Part 8: NFC Tag Protection | |
| Qi Specification version 2.0 - Part 9: Authentication Protocol | |
| Radiation protection instrumentation - Backpack-type radiation detector (BRD) for the detection of illicit trafficking of radioactive material | |
| Radiation protection instrumentation - Spectrometric radiation portal monitors (SRPMs) used for the detection and identification of illicit trafficking of radioactive material | |
| Radiation protection instrumentation - Spectroscopy-based alarming personal radiation detectors (SPRD) for the detection of illicit trafficking of radioactive material | |
| Radiation protection instrumentation - Vehicle-mounted mobile systems for the detection of illicit trafficking of radioactive materials | |
| Railway applications - Electronic power converters for fixed installations \x96 Part 1: General requirements | |
| Railway applications - Rolling stock - Onboard lithium-ion traction batteries | |
| Reference conditions and procedures for testing industrial and process measurement transmitters Part 1: General procedures for all types of transmitters | |
| Reference conditions and procedures for testing industrial and process measurement transmitters Part 2: Specific procedures for pressure transmitters | |
| Reference conditions and procedures for testing industrial and process measurement transmitters Part 3: Specific procedures for temperature transmitters | |
| Reference conditions and procedures for testing industrial and process measurement transmitters Part 4: Specific procedures for level transmitters | |
| Reference conditions and procedures for testing industrial and process measurement transmitters Part 5: Specific procedures for flow transmitters | |
| Representation of electrical and instrument objects in digital 3D plant models during engineering | |
| Robotics for electricity generation, transmission and distribution systems - Part 1-1: Terminology for electric power robots | |
| Safety requirements for power electronic converter systems and equipment - Part 1: General | |
| Safety requirements for power electronic converter systems and equipment \x96 Part 1: General | |
| Safety requirements for power electronic converter systems and equipment Part 2: Power electronic converters from 1 000 V AC or 1 500 V DC up to 36 kV AC or... | |
| Safety requirements for secondary batteries and battery installations Part 1: General safety information | |
| Safety requirements for secondary batteries and battery installations Part 2: Stationary batteries | |
| Safety requirements for secondary batteries and battery installations Part 4: Valve-regulated lead-acid batteries for use in portable appliances | |
| Safety requirements for secondary batteries and battery installations Part 5: Safe operation of stationary lithium ion batteries | |
| Safety requirements for secondary batteries and battery installations Part 6: Safe operation of lithium-ion batteries in traction applications | |
| Sample preparation for measurement of mercury level in fluorescent lamps | |
| Secondary cells and batteries - Marking symbols for identification of their chemistry | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium batteries for use in road vehicles not for the propulsion | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries for use in electrical energy storage systems | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-metal hydride cells and batteries for use in industrial applications Part 1: Performance | |
| Secondary cells and batteries containing alkaline or other nonacid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications | |
| Secondary cells and batteries containing alkaline or other nonacid electrolytes - Sealed nickel-metal hydride cells and batteries for use in industrial applications - Part 2: Safety | |
| Secondary cells and batteries containing alkaline or other nonacid electrolytes - Secondary lithium, nickel cadmium and nickelmetal hydride cells and batteries for portable applications - Guidance on environmental aspect | |
| Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 3: Safety requirements | |
| Secondary lithium-ion cells for the propulsion of electric road vehicles Part 1: Performance testing | |
| Secondary lithium-ion cells for the propulsion of electric road vehicles Part 2: Reliability and abuse testing | |
| Security for industrial automation and control systems Part 4-1: Secure product development lifecycle requirements | |
| Security for industrial automation and control systems Part 4-2: Technical security requirements for IACS components | |
| Semiconductor devices - Generic semiconductor qualification guidelines Part 1: Guidelines for IC reliability qualification | |
| Semiconductor devices - Semiconductor devices for IoT system Part 1: Test method of sound variation detection | |
| Semiconductor devices - Semiconductor devices for wireless power transfer and charging Part 1: General requirements and specifications | |
| Semiconductor devices - Semiconductor interface for automotive vehicles Part 1: General requirements of power interface for automotive vehicle sensors | |
| Semiconductor devices - Semiconductor interface for automotive vehicles Part 2: Efficiency evaluation methods of wireless power transmission using resonance for automotive vehicles sensors | |
| Semiconductor devices - Semiconductor interface for automotive vehicles Part 3: Shock driven piezoelectric energy harvesting for automotive vehicle sensors | |
| Semiconductor devices - Semiconductor interface for automotive vehicles Part 4: Evaluation method of data interface for automative vehivle sensors | |
| Shunt power capacitors of the self-healing type for AC systems having a rated voltage above 1 000 V | |
| Sistemi e apparecchiature multimediali per auto - Sistema di monitoraggio della guida Parte 3: Metodi di misura | |
| Solar thermal electric plants Part 3-2: Systems and components - General requirements and test methods for largesize parabolic-trough collectors | |
| Spatial wireless power transfer based on multiple magnetic resonances Part 1: Requirements | |
| Spatial wireless power transfer based on multiple magnetic resonances Part 2: Reference model | |
| Specification for WB series glass beads with 50 ? impedance for RF connectors | |
| Standard interface for connecting charging stations to local energy management systems \x96 Part 1: General requirements, use cases and abstract messages | |
| Standard test radio-frequency connectors Part 1: Generic specification - General requirements and test methods | |
| Standardized product ontology register and transfer by data parcels Part 8: Web service interface for data parcels | |
| Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality Part 1: Generic specification | |
| Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality Part 2: Guidelines for the use | |
| Surface cleaning appliances - Part 4: Cordless dry vacuum cleaners for household or similar use - Methods for measuring the performance | |
| Surface cleaning appliances Part 4: Cordless dry vacuum cleaners for household or similar use - Methods for measuring the performance | |
| Surface cleaning appliances Part 5: High pressure cleaners and steam cleaners for household and commercial use - Methods for measuring performance | |
| Surface cleaning appliances Part 8: Dry vacuum cleaners for commercial use - Methods for measuring the performance | |
| Surface cleaning appliances Part 9: Floor treatment machines with or without traction drive, for commercial use - Methods of measuring the performance | |
| Switchgear and controlgear and their assemblies for low voltage - Integration of radiocommunication device above 380 MHz into an equipment | |
| Systems interface between customer energy management system and the power management system \x96 Part 4: Demand Side Resource Interface | |
| Systems interface between customer energy management system and the power management system Part 10-3: Open automated demand response - Adapting smart grid user interfaces to the IEC common information model... | |
| Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances | |
| Terrestrial photovoltaic (PV) modules - Quality system for PV module manufacturing | |
| Test methods for electrical and magnetic properties of magnetic powder cores | |
| Text-to-speech for television - General requirements | |
| Thermal standardization on semiconductor packages \x96 Part 3: Thermal circuit simulation models of discrete semiconductor packages for transient analysis | |
| Ultrasonics - Non-focusing short pressure pulse sources including pneumatic and ballistic pressure pulse sources - Characteristics of fields | |
| Ultrasonics - Shear-wave elastography \x96 Part 1: Specifications for the user interface | |
| Ultrasound - Physiotherapy Systems - Field specifications and methods of measurement in the frequency range 20 kHz to 500 kHz | |
| Underwater Acoustics - Calibration of acoustic wave vector receivers in the frequency range 5 Hz to 10 kHz | |
| Unified reference model for smart manufacturing | |
| Universal Serial Bus interfaces for data and power Part 1-2: Common components - USB Power Delivery Specification | |
| Universal serial bus interfaces for data and power Part 1-3: Common components - USB Type-C Cable and Connector Specification | |
| Universal Serial Bus interfaces for data and power Part 1-4: Common Components - USB Type-C(tm) Authentication Specification | |
| Universal serial bus interfaces for data and power Part 1-5: Common components - USB Audio 3.0 device class definition | |
| Universal serial bus interfaces for data and power Part 1-6:Common components - USB Audio 3.0 device class definition basic functions | |
| Universal serial bus interfaces for data and power Part 1-7: Common components - USB Audio 3.0 device class definition data formats | |
| Universal serial bus interfaces for data and power Part 1-8: Common components - USB Audio 3.0 device class definition terminal types | |
| Universal Serial Bus interfaces for data and power Part 4-1: Universal Serial Bus 4 (tm) Specification | |
| Use case methodology Part 3: Definition of use case template artefacts into an XML serialized format | |
| Video Surveillance Systems (VSS) for use in security applications \x96 Part 2-11: Video transmission protocols - Interop profiles for VMS and cloud VSaaS systems for safe cities and law enforcement... | |
| Video surveillance systems for use in security applications \x96 Part 5-1: Data specifications and image quality performance for camera devices - Environmental test methods for image quality performance | |
| Video surveillance systems for use in security applications Part 2-31: Live streaming and control based on web services | |
| Video surveillance systems for use in security applications Part 2-32: Recording control and replay based on web services | |
| Video surveillance systems for use in security applications Part 2-33: Video transmission protocols - Cloud uplink and remote management system access | |
| Video surveillance systems for use in security applications Part 5: Data specification and image quality performance for camera devices | |
| Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing | |
| Waveguide to coaxial adapters Part 1: Generic specification - General requirements and test methods | |
| Wearable electronic devices and technologies \x96 Part 201-2: Electronic textile - Measurement methods for basic properties of conductive fabrics and insulation materials | |
| Wearable electronic devices and technologies \x96 Part 204-2: Electronic textile - Test method to characterize electrical resistance change in knee and elbow bending test of e-textiles | |
| Wearable electronic devices and technologies \x96 Part 301-1: Test method of electrochromic films for wearable equipments | |
| Wearable electronic devices and technologies \x96 Part 402-2: Performance measurement of fitness wearables - Step counting | |
| Wearable electronic devices and technologies \x96 Part 402-3: Performance measurement method of wearables - Series 2: Accuracy of Heart Rate Determination | |
| Wearable electronic devices and technologies Part 101-1: Terminology | |
| Wearable electronic devices and technologies Part 201-1: Electronic textile - Measurement methods for basic properties of conductive yarns | |
| Wearable electronic devices and technologies Part 201-2: Electronic textile - Measurement methods for basic properties of conductive fabrics and insulation materials | |
| Wearable electronic devices and technologies Part 201-3: Electronic textile - Determination of electrical resistance of conductive textiles under simulated microclimate | |
| Wearable electronic devices and technologies Part 204-1: Electronic textile - Test method for assessing washing durability of leisurewear and sportswear e-textile systems | |
| Wearable electronic devices and technologies Part 402-1: Performance measurement of fitness wearables - Test methods of glove-type motion sensors for measuring finger movements | |
| Wearable electronic devices and technologies Part 406-1: Test method for measuring surface temperature of wrist-worn wearable electronic devices while in contact with human skin | |
| Wearable electronic devices and technologies Part 801-1: Smart body area network (SmartBAN) - Enhanced ultra-low power physical layer | |
| Wearable electronic devices and technologies Part 801-2: Smart body area network (SmartBAN) - Low complexity medium access control (MAC) for SmartBAN | |
| Wireless power transfer (WPT) - Glossary of terms | |
| Workplace Atmospheres Part 1: Gas detectors - Performance requirements of detectors for toxic gases | |
| Workplace atmospheres Part 2: Gas detectors - Selection, installation, use and maintenance of detectors for toxic gases and vapours |
| << Prev | Next >> |