Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
450
500
550
600
650
700
730
740
750
760
770
780
783
784
785
786
787
788
789
790
791
792
793
794
795
800
810
820
830
840
850
900
950
1000
1050
1100
1150
1500
1620
| Product Name | Notes |
|---|---|
| Adjustable speed electrical power drive systems - Part 1: General requirements - Rating specifications for low voltage adjustable speed d.c. power drive systems | |
| Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for low voltage adjustable frequency a.c. power drive systems | |
| Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods | |
| Adjustable speed electrical power drive systems - Part 4: General requirements - Rating specifications for a.c. power drive systems above 1000 V a.c. and not exceeding 35 kV | |
| Adjustable speed electrical power drive systems Part 3: EMC requirements and specific test methods | |
| Adjustable speed electrical power drive systems Part 5-1: Safety requirements - Electrical, thermal and energy | |
| Adjustable speed electrical power drive systems Part 5-2: Safety requirements - Functional | |
| Adjustable speed electrical power drive systems Part 7-1: Generic interface and use of profiles for power drive systems - Interface definition | |
| Adjustable speed electrical power drive systems Part 7-201: Generic interface and use of profiles for power drive systems - Profile type 1 specification | |
| Adjustable speed electrical power drive systems Part 7-202: Generic interface and use of profiles for power drive systems - Profile type 2 specification | |
| Adjustable speed electrical power drive systems Part 7-203: Generic interface and use of profiles for power drive systems Profile type 3 specification | |
| Adjustable speed electrical power drive systems Part 7-204: Generic interface and use of profiles for power drive systems Profile type 4 specification | |
| Adjustable speed electrical power drive systems Part 7-301: Generic interface and use of profiles for power drive systems Mapping of profile type 1 to network technologies | |
| Adjustable speed electrical power drive systems Part 7-302: Generic interface and use of profiles for power drive systems Mapping of profile type 2 to network technologies | |
| Adjustable speed electrical power drive systems Part 7-303: Generic interface and use of profiles for power drive systems Mapping of profile type 3 to network technologies | |
| Adjustable speed electrical power drive systems Part 7-304: Generic interface and use of profiles for power drive systems Mapping of profile type 4 to network technologies | |
| Adjustable speed electrical power drive systems Part 9-1: Ecodesign for power drive systems, motor starters, power electronics and their driven applications - General requirements for setting energy efficiency standards for... | |
| Adjustable speed electrical power drive systems Part 9-2: Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Energy efficiency indicators for power drive systems and... | |
| Analytical expression for daily solar profiles | |
| Aramid pressboard for electrical purposes - Part 2: Methods of tests | |
| Audio and audiovisual equipment - Digital audio parts - Basic measurement methods of audio characteristics - Part 4: Personal computer | |
| Audio and audiovisual equipment - Digital audio parts - Basic measurement methods of audio characteristics Part 1: General | |
| Audio and audiovisual equipment - Digital audio parts - Basic measurement methods of audio characteristics Part 2: Consumer use | |
| Audio and audiovisual equipment - Digital audio parts - Basic measurement methods of audio characteristics Part 3: Professional use | |
| Batch control - Part 3: General and site recipe models and representation | |
| Batch control Part 1: Models and terminology | |
| Batch control Part 2: Data structure and guidelines for languages | |
| Batch control Part 4: Batch production records | |
| Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method | |
| Cable management - Cable tray systems and cable ladder systems | |
| Calcolo della potenza e del ritardo - Parte 2: Specifiche del calcolo del ritardo di pre installazione per le librerie ASIC CMOS | |
| Calibration of fibre optic chromatic dispersion test sets | |
| Calibration of optical time-domain reflectometers (OTDR) Part 1: OTDR for single-mode fibres | |
| Calibration of optical time-domain reflectometers (OTDR) Part 2: OTDR for multimode fibres | |
| Calibration of optical time-domain reflectometers (OTDR) | |
| Components for low-voltage surge protection devices - Part 321: Specifications for Avalanche Breakdown Diode (ABD) | |
| Components for low-voltage surge protection devices - Part 331: Specification for metal oxide varistors (MOV) | |
| Components for low-voltage surge protective devices - Part 341: Specification for thyristor surge suppressor (TSS) | |
| Components for low-voltage surge protective devices Part 311: Performance requirements and test circuits and methods for gas discharge tubes (GDT) | |
| Components for low-voltage surge protective devices Part 312: Selection and application principles for gas discharge tubes | |
| Components for low-voltage surge protective devices Part 351: Performance requirements and test methods for telecommunications and signalling network surge isolation transformers (SIT) | |
| Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1000 V - Definitions, test methods, acceptance criteria and design recommendations | |
| Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V Part 2: Dimensional and electrical characteristics | |
| Composite string insulator units for overhead lines with a nominal voltage greater than 1 kV - Part 1: Standard strength classes and end fittings | |
| Composite string insulator units for overhead lines with a nominal voltage greater than 1 kV - Part 2: Dimensional and electrical characteristics | |
| Corrugated pressboard and presspaper for electrical purposes - Part 1: Definitions, designations and general requirements | |
| Corrugated pressboard and presspaper for electrical purposes - Part 2: Methods of test | |
| Delay and power calculation standards - Part 1: Integrated circuit delay and power calculation systems | |
| Determination of power losses in high-voltage direct current (HVDC) converter stations - Questa Norma illustra un metodo per determinare le perdite nelle stazioni di conversione di alta tensione in corrente... | |
| Determination of power losses in high-voltage direct current (HVDC) converter stations with line commutated converters | |
| Dispositivi di visualizzazione a cristalli liquidi e allo stato solido - Parte 2: Moduli di visualizzazione a cristalli liquidi - Specifica settoriale | |
| Dispositivi di visualizzazione a cristalli liquidi e allo stato solido - Parte 5: Metodi di prova meccanici, di durata ed ambientali | |
| Dry, solid insulating materials - Resistance test to high-voltage, low-current arc discharges | |
| Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose sets | |
| Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets | |
| Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part... | |
| Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 10:... | |
| Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 11:... | |
| Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 12:... | |
| Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 13:... | |
| Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 14:... | |
| Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 16:... | |
| Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 8:... | |
| Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 9:... | |
| Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures Part 15:... | |
| Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 4:... | |
| Electroacoustics - Equipment for the measurement of real-ear acoustical characteristics of hearing aids | |
| Electroacoustics - Sound level meters Part 1: Specifications | |
| Electroacoustics - Sound level meters Part 2: Pattern evaluation tests | |
| Electroacoustics - Sound level meters Part 3: Periodic tests | |
| Electronic components - Reliability - Reference conditions for failure rates and stress models for conversion | |
| Electronic Design Interchange Format (EDIF) - Part 2: Version 4.0.0 | |
| Electronic Design Interchange Format (EDIF) Part 1: Version 3.0.0 | |
| Elettroacustica - Misura delle caratteristiche di prestazione acustica sull'orecchio reale delle protesi acustiche | |
| End-face image analysis procedure for the calibration of optical fibre geometry test sets | |
| Equipment for general lighting purposes - EMC immunity requirements | |
| Fibre optic connector interfaces - Part 10: Type Mini-MPO connector family | |
| Fibre optic connector interfaces - Part 12: Type FS connector family | |
| Fibre optic connector interfaces - Part 13: Type FC-PC connector | |
| Fibre optic connector interfaces - Part 16: Type PN connector family | |
| Fibre optic connector interfaces - Part 18: Type MT-RJ connector family | |
| Fibre optic connector interfaces - Part 19: Type SG connector family | |
| Fibre optic connector interfaces - Part 21: Type SMI connector family for plastic optical fibre | |
| Fibre optic connector interfaces - Part 22: Type F-SMA connector family | |
| Fibre optic connector interfaces - Part 23: Type LX.5 connector family | |
| Fibre optic connector interfaces - Part 25: Type RAO connector family | |
| Fibre optic connector interfaces - Part 2: Type BFOC/2,5 connector family | |
| Fibre optic connector interfaces - Part 3: Type LSA connector family | |
| Fibre optic connector interfaces - Part 4-1: Type SC connector family - Simplified receptacle SC-PC connector interfaces | |
| Fibre optic connector interfaces - Part 5: Type MT connector family | |
| Fibre optic connector interfaces - Part 6-1: Type MU connector family - Simplified receptacle MU-PC connector interfaces | |
| Fibre optic connector interfaces - Part 8: Type CFO8 connector family | |
| Fibre optic connector interfaces - Part 9: Type DS connector family | |
| Fibre optic connector optical interfaces - Part 1: Optical interfaces for single mode non-dispersion shifted fibres - General and guidance | |
| Fibre optic connector optical interfaces - Part 2-1: Optical interface standard single mode non-angled physically contacting fibres | |
| Fibre optic connector optical interfaces - Part 2-2: Optical interface standard single mode angled physically contacting fibres | |
| Fibre optic connector optical interfaces - Part 3-5: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre... | |
| Fibre optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using CuNi-alloy as fibre surrounding material, single... | |
| Fibre optic connector optical interfaces Part 3-1: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia PC ferrule, single mode fibre | |
| Fibre optic connector optical interfaces Part 3-2: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres | |
| Fibre optic connector optical interfaces Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode... | |
| Fibre optic interconnectiing devices and passive components - Fibre optic connector interfaces Part 34: Type URM connector family | |
| Fibre optic interconnecting devices and passive components - Connector optical interfaces Part 2-4: Connection parameters of non-dispersion shifted single-mode physically contacting fibres - Non-angled for reference connection applications | |
| Fibre optic interconnecting devices and passive components - Connector optical interfaces Part 2-5: Connection parameters of non-dispersion shifted single-mode physically contacting fibres - Angled for reference connection applications | |
| Fibre optic interconnecting devices and passive components - Connector optical interfaces Part 3-10: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Non-angled, ferrule-less, bore alignment connectors | |
| Fibre optic interconnecting devices and passive components - Connector optical interfaces Part 3-31: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Angled polyphenylene sulphide rectangular ferrules | |
| Fibre optic interconnecting devices and passive components - Connector optical interfaces Part 3-32: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Angled thermoset epoxy rectangular ferrules | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 15: Type LSH connector family | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 1: General and guidance | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 20-100: Interface standard for LC connectors with protective housings related to IEC 61076-3-106 | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 20: Type LC connector family | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 24-11: Interface standard for SC-RJ connectors with protective housings based on IEC 61076-3-117 | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 24-21: Interface standard for SC-RJ connectors with protective housings based on IEC 61076-3-106, variant 06 | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 24: Type SC-RJ connector family | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 26: Type SF connector family | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 27: Type M12-FO connector family | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 28: Type LF3 connector family | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 29: Type BLINK connector series | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 30:Type CLIK connector series | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 31: Type N-FO connector family | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 32: Type DiaLink connector family | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 4-100: Type SC connector family - Simplified receptacle SC-PC connector interfaces | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 4: Type SC connector family | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 6-100: Type MU connector family - Simplified receptacle MU-PC connector interfaces | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 6: Type MU connector family | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 7-1: Type MPO connector family - One fibre row | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 7: Type MPO connector family | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces Part 3-7: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using titanium as... | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces Part 3-8: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-APC composite ferrule using... | |
| Fibre optic interconnecting devices and passive components - Firbre optic connector interfaces Part 15: Type LSH connector family | |
| Fibre optic interconnecting devices and passive components - Interface standard for closures Part 1: General and guidance | |
| Fibre optic interconnecting devices and passive components - Interface standard for fibre management systems - Part 1: General and guidance | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 021-3: Single-mode fibre optic connectors for category U - Uncontrolled environment | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 022-2: Fibre optic connectors terminated on multimode fibre for category C - Controlled environment | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 031-2: Non-connectorized single-mode 1xN and 2xN non-wavelength-selec tive branching devices for Category C - Controlled environment | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 041-2: Non-connectorized single-mode OTDR reflecting device for category C - Controlled environment | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 042-2: Plug-pigtail-style and plug-receptacle-styl e OTDR reflecting devices for category C - Controlled environments | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 051-3: Single-mode fibre plug style optical attenuator for category U - Uncontrolled environment | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 052-6: Single-mode fibre non-connectorized fixed attenuator - Category O in outside plant environment | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 053-2: Non-connectorised single-mode fibre electrically controlled variable optical attenuator for category C - Controlled environments | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 056-2: Single mode fibre pigtailed style optical fuse for category C - Controlled environment | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 057-2: Single mode fibre plug-recptacle-recep tacle style optical fuse for category C - Controlled environment | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 058-2: Single mode fibre pigtailed style optical power limiter for category C - Controlled environment | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 059-2: Single-mode fibre plug-receptacle style optical limiter for category C - Controlled environment | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 061-2: Non-connectorized single-mode fibre optic pigtailed isolators for category C - Controlled environment | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 071-2: Non-connectorized single-mode fibre optic 1 \xd7 2 and 2 \xd7 2 spatial switches for category C - Controlled... | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 081-2: Non-connectorized single-mode fibre optic middle-scale 1 x N DWDM devices for category C - Controlled environments | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 086-6: Non-connectorised single-mode bidirectional 1 490 / 1 550 nm downstream and 1 310 nm upstream WWDM devices for... | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 087-2: Non-connectorised single-mode bidirectional 1 310 nm upstream and 1 490 nm downstream WWDM devices for category C -... | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 087-6: Non-connectorised single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category O - Uncontrolled environment... | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 088-2: Non connectorised single-mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C -... | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 089-2: Non-connectorised single-mode bidirectional OTDR monitoring WWDM devices for Category C - Controlled environment | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 091-2: Non-connectorised single-mode fibre optic pigtailed circulators for category C - Controlled environment | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 1-3: General and guidance for single-mode fibre optic connector and cable assembly for industrial environment, Category I | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 111-7: Sealed closures for category A - Aerial | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 111-8: Sealed closures for category G - Ground | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 111-9: Closures for category S - Subterranean | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 131-3: Singlemode mechanical fibre splice for category U - Uncontrolled environment | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 141-2: Fibre optic passive chromatic dispersion compensator using single-mode dispersion compensating fibre for category C - Controlled environments | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 143-2: Optical passive VIPA-based dispersion compensator of singlemode fibre transmission for category C - Controlled environments | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 381-2: Cyclic arrayed waveguide grating - Category C (controlled environment) | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 381-6: Cyclic arrayed waveguide grating - Category O (uncontrolled environment) | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 382-2: Non-connectorised single-mode bidirectional G-PON-NGA WWDM devices for category C - Controlled environment | |
| Fibre optic interconnecting devices and passive components - Performance standards Part 121-2: Simplex and duplex cords with singlemode fibre and cylindrical ferrule connectors for category C - Controlled environment | |
| Fibre optic interconnecting devices and passive components - Performance standards Part 121-3: Simplex and duplex cords with singlemode fibre and cylindrical ferrule connectors for category U - Uncontrolled environment | |
| Fibre optic interconnecting devices and passive components performance standard - Part 2-1: Fibre optic connectors terminated on single-mode fibre for category U - Uncontrolled environment | |
| Fibre optic interconnecting devices and passive components performance standard - Part 2-3: Non-connectorised single mode 1xN and 2xN non-wavelength selective branching devices for category U - Uncontrolled environment | |
| Fibre optic interconnecting devices and passive components performance standard Part 021-2: Grade C/3 single-mode fibre optic connectors for category C Controlled environment | |
| Fibre optic interconnecting devices and passive components performance standard Part 021-6: Grade B/2 single-mode fibre optic connectors for category O Uncontrolled environment | |
| Fibre optic interconnecting devices and passive components performance standard Part 031-3: Non-connectorized single-mode 1xN and 2xN Non-Wavelengthselect ive Branching Devices (NWBD) for Category U - Uncontrolled environment | |
| Fibre optic interconnecting devices and passive components performance standard Part 031-6: Non-connectorised single mode 1xN and 2xN non-wavelengthselect ive branching devices (NWBD) for category O - Uncontrolled environment | |
| Fibre optic interconnecting devices and passive components performance standard Part 052-3: Single-mode fibre, pigtailed-style fixed attenuators for category U - Uncontrolled environment | |
| Fibre optic interconnecting devices and passive components performance standard Part 053-3: Continuously variable attenuators for category U - Uncontrolled environment | |
| Fibre optic interconnecting devices and passive components performance standard Part 061-3: Single mode fibre optic pigtailed style isolators for category U Uncontrolled environment | |
| Fibre optic interconnecting devices and passive components performance standard Part 062-6: Non-connectorized single-mode fibre optic pigtailed isolators for category O - Uncontrolled environment and sequential test | |
| Fibre optic interconnecting devices and passive components performance standard Part 083-2: Non-connectorised single-mode fibre optic C-band/L-band WDM devices for category C - Controlled environment | |
| Fibre optic interconnecting devices and passive components performance standard Part 084-2: Non connectorised single-mode 980/1550 nm WWDM devices for category C - Controlled environment | |
| Fibre optic interconnecting devices and passive components performance standard Part 086-2: Non-connectorised single-mode bidirectional 1490/1550 nm downstream 1310 nm upstream WWDM devices for category C - Controlled environment | |
| Fibre optic interconnecting devices and passive components performance standard Part 091-3: Single-mode fibre optic pigtailed style circulators for category U - Uncontrolled environment | |
| Fibre optic interconnecting devices and passive components performance standard Part 092-6: Non-connectorized single-mode circulators for category O Uncontrolled environment and sequential test | |
| Fibre optic interconnecting devices and passive components performance standard Part 101-3: Fibre management systems for category U - Uncontrolled environment | |
| Fibre optic interconnecting performance standard - devices - and - passive - components - Part 101-2: Fibre management systems for category C Controlled environment | |
| Fibre optic sensors Part 1: Generic specification | |
| Fibre optic sensors Part 2-1: Strain measurement - Strain sensors based on fibre Bragg gratings | |
| Fibre optic sensors Part 2-1: Temperature measurement - Temperature sensors based on fibre Bragg gratings | |
| Fibre optic sensors Part 2-2: Temperature measurement - Distributed sensing | |
| Fixed inductors for use in electronic and telecommunication equipment Marking codes | |
| Function Blocks (FB) for process control - Part 2: Specification of FB concept | |
| Function Blocks (FB) for process control Part 3: Electronic Device Description Language (EDDL) | |
| Function blocks Part 1: Architecture | |
| Function blocks Part 2: Software tool requirements | |
| Function blocks Part 4: Rules for compliance profiles | |
| Functional safety - Safety instrumented systems for the process industry sector - Normative (uon) Part 1: Framework, definitions, system, hardware and software requirements | |
| Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and software requirements | |
| Functional safety - Safety instrumented systems for the process industry sector Part 2: Guidelines for the application of IEC 61511-1 | |
| Functional safety - Safety instrumented systems for the process industry sector Part 3: Guidance for the determination of the required safety integrity levels | |
| Functional safety of electrical/electroni c/programmable electronic safetyrelated systems Part 1: General requirements | |
| Functional safety of electrical/electroni c/programmable electronic safetyrelated systems Part 2: Requirements for electrical/electroni c/programmable electronic safety-related systems | |
| Functional safety of electrical/electroni c/programmable electronic safetyrelated systems Part 3: Software requirements | |
| Functional safety of electrical/electroni c/programmable electronic safetyrelated systems Part 4: Definitions and abbreviations | |
| Functional safety of electrical/electroni c/programmable electronic safetyrelated systems Part 5: Examples of methods for the determination of safety integrity levels | |
| Functional safety of electrical/electroni c/programmable electronic safetyrelated systems Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 | |
| Functional safety of electrical/electroni c/programmable electronic safetyrelated systems Part 7: Overview of techniques and measures | |
| Household range hoods - Methods for measuring performance | |
| Household range hoods and other cooking fume extractors - Methods for measuring performance | |
| Industrial a.c. networks affected by harmonics -Application of filters and shunt capacitors | |
| Industrial communication networks - Profiles Part 1: Fieldbus profiles | |
| Industrial communication networks - Profiles Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3 | |
| Industrial communication networks - Profiles Part 3-12: Functional safety fieldbuses - Additional specifications for CPF 12 | |
| Industrial communication networks - Profiles Part 3-13: Functional safety fieldbuses - Additional specifications for CPF 13 | |
| Industrial communication networks - Profiles Part 3-14: Functional safety fieldbuses - Additional specifications for CPF 14 | |
| Industrial communication networks - Profiles Part 3-17: Functional safety fieldbuses - Additional specifications for CPF 17 | |
| Industrial communication networks - Profiles Part 3-18: Functional safety fieldbuses - Additional specifications for CPF 18 | |
| Industrial communication networks - Profiles Part 3-18: Functionnal safety fieldbuses - Additional specifications for CPF 18 | |
| Industrial communication networks - Profiles Part 3-1: Functional safety fieldbuses - Additional specifications for CPF 1 | |
| Industrial communication networks - Profiles Part 3-2: Functional safety fieldbuses - Additional specifications for CPF 2 | |
| Industrial communication networks - Profiles Part 3-3: Functional safety fieldbuses - Additional specifications for CPF 3 | |
| Industrial communication networks - Profiles Part 3-6: Functional safety fieldbuses - Additional specifications for CPF 6 | |
| Industrial communication networks - Profiles Part 3-8: Functional safety fieldbuses - Additional specifications for CPF 8 | |
| Industrial communication networks - Profiles Part 3: Functional safety fieldbuses - General rules and profile definitions | |
| Industrial communication networks - Profiles Part 5-10: Installation of fieldbuses - Installation profiles for CPF 10 | |
| Industrial communication networks - Profiles Part 5-11: Installation of fieldbuses - Installation profiles for CPF 11 | |
| Industrial communication networks - Profiles Part 5-12: Installation of fieldbuses - Installation profiles for CPF 12 | |
| Industrial communication networks - Profiles Part 5-13: Installation of fieldbuses - Installation profiles for CPF 13 | |
| Industrial communication networks - Profiles Part 5-14: Installation of fieldbuses - Installation profiles for CPF 14 | |
| Industrial communication networks - Profiles Part 5-15: Installation of fieldbuses - Installation profiles for CPF 15 | |
| Industrial communication networks - Profiles Part 5-16: Installation of fieldbuses - Installation profiles for CPF 16 | |
| Industrial communication networks - Profiles Part 5-17: Installation of fieldbuses - Installation profiles for CPF 17 | |
| Industrial communication networks - Profiles Part 5-18: Installation of fieldbuses - Installation profiles for CPF 18 | |
| Industrial communication networks - Profiles Part 5-19: Installation of fieldbuses - Installation profiles for CPF 19 | |
| Industrial communication networks - Profiles Part 5-1: Installation of fieldbuses - Installation profiles for CPF 1 | |
| Industrial communication networks - Profiles Part 5-2: Installation of fieldbuses - Installation profiles for CPF 2 | |
| Industrial communication networks - Profiles Part 5-3: Installation of fieldbuses - Installation profiles for CPF 3 | |
| Industrial communication networks - Profiles Part 5-4: Installation of fieldbuses - Installation profiles for CPF 4 | |
| Industrial communication networks - Profiles Part 5-6: Installation of fieldbuses - Installation profiles for CPF 6 | |
| Industrial communication networks - Profiles Part 5-8: Installation of fieldbuses - Installation profiles for CPF 8 | |
| Industrial process control systems Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs mounted on an actuator valve assembly | |
| Industrial systems, installations and equipment and industrial products - Identification of terminals within a system | |
| Industrial systems, installations and equipment and industrial products Identification of terminals within a system | |
| Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs | |
| Installation couplers intended for permanent connection in fixed installation | |
| Installation couplers intended for permanent connection in fixed installations | |
| Insulating liquids - Contamination by polychlorinated biphenyls (PCBs) - Method of determination by capillary column gas chromatography | |
| Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method | |
| Insulators for overhead lines - Insulator strings and sets for lines with a nominal voltage greater than 1 000 V - AC power arc tests | |
| Laser modules used for telecommunication - Reliability assessment | |
| Linguaggi relativi ai componenti - Parte 2: Sistemi a logica multipla per i modelli di interoperabilit\xe0 | |
| Linguaggi relativi ai componenti - Parte 3-2: Operazioni matematiche in VHDL | |
| Linguaggi relativi ai componenti - Parte 3-3: Sintesi in VHDL | |
| Liquid crystal and solid-state display devices - Part 1: Generic specification | |
| Liquid crystal display devices - Part 2-2: Matrix colour LCD modules - Blank detail specification | |
| Liquid crystal display devices - Part 3-1: Liquid crystal display (LCD) cells - Blank detail specification | |
| Liquid crystal display devices - Part 3: Liquid crystal diplay (LCD) cells - Sectional specification | |
| Liquid crystal display devices - Part 4-1: Matrix colour LCD modules - Essential ratings and characteristics | |
| Liquid crystal display devices Part 10-1: Mechanical test methods | |
| Liquid crystal display devices Part 2-1: Passive matrix monochrome LCD modules - Blank detail specification | |
| Liquid crystal display devices Part 30-1: Measuring methods for liquid crystal display modules - Transmissive type | |
| Liquid crystal display devices Part 4: Liquid crystal display modules and cells - Essential ratings and characteristics | |
| Liquid crystal display devices Part 5-2: Environmental, endurance and mechanical test methods - Visual inspection of active matrix colour liquid crystal display modules | |
| Liquid crystal display devices Part 5-3: Environmental, endurance and mechanical test methods - Glass strength and reliability | |
| Liquid crystal display devices Part 6-2: Measuring methods for liquid crystal display modules - Reflective type | |
| Liquid crystal display devices Part 6-3: Measuring methods for liquid crystal display modules - Motion artifact measurement of active matrix liquid crystal display modules | |
| Live working - Flexible conductor covers (line hoses) of insulating material | |
| Live working - Ladders of insulating material | |
| Live working - Minimum approach distances for AC systems in the voltage range 72,5 kV to 800 kV - A method of calculation | |
| Live working - Minimum requirements for the utilization of tools, devices and equipment | |
| Live working - Phase comparators Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. | |
| Live working - Phase comparators Part 2: Resistive type to be used for voltages from 1 kV to 36 kV a.c. | |
| Live working - Portable phase comparators for use on voltages from 1 kV to 36 kV a.c. | |
| Live working - Portable phase comparators for use on voltages of 1 kV to 36 kV a.c. | |
| Live working - Portable phase comparators for voltages of 1 kV and 36 kV a.c. | |
| Live working - Protective clothing against the thermal hazards of an electric arc - Part 1-2: Test methods - Method 2: Determination of arc protection class of material and clothing... | |
| Live working - Protective clothing against the thermal hazards of an electric arc Part 1-1: Test methods - Method 1 - Determination of the arc rating (ATPV or EBT50) of... | |
| Live working - Protective clothing against the thermal hazards of an electric arc Part 2: Requirements | |
| Low voltage surge protective devices - Part 21: Surge protective devices connected to telecommunications and signalling networks - Performance requirements and testing methods | |
| Low voltage surge protective devices Part 21: Surge protective devices connected to telecommunications and signalling networks - Performance requirements and testing methods | |
| Low-voltage surge protective devices Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods | |
| Low-voltage surge protective devices Part 31: Requirements and test methods for SPDs for photovoltaic installations | |
| Low-voltage switchgear and controlgear assemblies Part 1: General rules | |
| Low-voltage switchgear and controlgear assemblies Part 2: Power switchgear and controlgear assemblies | |
| Low-voltage switchgear and controlgear assemblies Part 3: Distribution boards intended to be operated by ordinary persons (DBO) | |
| Low-voltage switchgear and controlgear assemblies Part 4: Particular requirements for assemblies for construction sites (ACS) | |
| Low-voltage switchgear and controlgear assemblies Part 5: Assemblies for power distribution in public networks | |
| Low-voltage switchgear and controlgear assemblies Part 6: Busbar trunking systems (busways) | |
| Magnetic oxide EP-cores and associated parts for use in inductors and transformers - Dimensions | |
| Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1135 | |
| Mathematical expressions for reliability, availability, maintainability and maintenance support terms | |
| Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 bar (41,3 MPa) | |
| Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings \x96 Part 1: Requirements for measuring instruments... | |
| Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings Part 1: Requirements for measuring instruments | |
| Measurement of exposure to radio-frequency electromagnetic fields - Field strength in the frequency range 100 kHz to 1 GHz | |
| Measuring relays and protection equipment - Protection communication interfacing - Part 1: General | |
| Measuring relays and protection equipment - Protection communication interfacing Part 1: General | |
| Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series Part 6: Security aspects for indoor cabinets | |
| Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 Part 2: Seismic tests for cabinets and racks | |
| Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 Part 3: Electromagnetic shielding performance tests for cabinets and subracks | |
| Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 Part 4: Combination of performance levels for modular cabinets | |
| Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 Part 5: Seismic tests for chassis, subracks, and associated plug-in units | |
| Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series Part 1: Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under... | |
| Medical electrical equipment - Dosimeters with ionization chambers and/or semi-conductor detectors as used in X-ray diagnostic imaging | |
| Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology | |
| Methods of measurement for waveguides - Part 1: Decoupling and rotation of the plane of polarization | |
| Methods of measurement for waveguides - Part 2: Level of intermodulation products | |
| Methods of measurement for waveguides - Part 3: Variation of group delay | |
| Methods of measurement for waveguides - Part 4: Attenuation of waveguide and waveguide assemblies | |
| Methods of measurement for waveguides - Part 6: Return loss on waveguide and waveguide assemblies | |
| Methods of measurement for waveguides - Part 7: Graphical method for the determination of waveguide performance | |
| Methods of measurement for waveguides - Part 8: Waveguide power holding capability | |
| Methods of measurement for waveguides - Part 9: Reflection coefficient at rectangular waveguide interfaces | |
| Microwave ferrite components - Guide for the drafting of specifications | |
| Mineral insulated thermocouple cables and thermocouples | |
| Miscellaneous lamps | |
| Multichannel digital audio tape recorder (DATR), reel-to-reel system, for professional use - Part 1: Format A | |
| Multichannel digital audio tape recorder (DATR), reel-to-reel system, for professional use - Part 2: Format B | |
| Multichannel digital audio tape recorder (DATR), reel-to-reel system, for professional use - Part 3: 24-bit operation for 16-bit media | |
| Nuclear power plants - Control rooms - Application of visual display units (VDUs) | |
| Nuclear power plants - Instrumentation and control important to safety - General requirement for systems | |
| Nuclear power plants - Instrumentation and control systems important to safety - Data communication in systems performing A functions | |
| Overhead lines - Testing of foundations for structures | |
| Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction | |
| Photovoltaic (PV) module safety qualification Part 1: Requirements for construction | |
| Photovoltaic (PV) module safety qualification Part 2: Requirements for testing | |
| Photovoltaic (PV) systems - Characteristics of the utility interface | |
| Photovoltaic system performance monitoring - Guidelines for measurement, data exchange and analysis | |
| Photovoltaic system performance Part 1: Monitoring | |
| Photovoltaic systems - Power conditioners - Procedure for measuring efficiency | |
| Power law model - Goodness-of-fit tests and estimation methods | |
| Powertrack systems - Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting | |
| Powertrack systems Part 1: General requirements | |
| Powertrack systems Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting | |
| Powertrack systems Part 22: Particular requirements for powertrack systems intended for onfloor or underfloor installation | |
| Prints and transparencies produced from electronic sources - Assessment of image quality | |
| Radiation protection instrumentation - In vivo counters - Classification, general requirements and test procedures for portable, transportable and installed equipment | |
| Radiation protection instrumentation - Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations - Direct reading personal dose equivalent meters | |
| Radiation protection instrumentation - Radon and radon decay product measuring instruments Part 2: Specific requirements for 222Rn and 220Rn measuring instruments | |
| Radiation protection instrumentation - Radon and radon decay product measuring instruments Part 3: Specific requirements for radon decay product measuring instruments | |
| Radiation protection instrumentation - Radon and radon decay product measuring instruments Part 4: Equipment for the production of reference atmospheres containing radon isotopes and their decay products (STAR) | |
| Radionuclide imaging devices - Characteristics and test conditions - Part 2: Single photon emission computer tomographs | |
| Radionuclide imaging devices - Characteristics and test conditions - Part 3: Gamma camera based wholebody imaging systems | |
| Radionuclide imaging devices - Characteristics and test conditions Part 1: Positron emission tomographs | |
| Rating of direct coupled photovoltaic (PV) pumping systems | |
| Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility | |
| Residual current-operated protective devices (RCDs) for household and similar use Electromagnetic compatibility | |
| Safety of machinery - Electro-sensitive protective equipment Part 1: General requirements and tests | |
| Safety of machinery - Electro-sensitive protective equipment Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) | |
| Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications | |
| Safety of power transformers, power supplies, reactors and similar products - Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers | |
| Safety of power transformers, power supplies, reactors and similar products Part 2-7: Particular requirements and tests for transformers for toys | |
| Safety of power transformers, power supply units and similar devices - Part 2-19: Particular requirements for perturbation attenuation transformers | |
| Safety of power transformers, power supply units and similar devices Part 2-19: Particular requirements for perturbation attenuation transformers | |
| Safety of transformers, reactors, power supply units and combinations thereof Part 2-10: Particular requirements and tests for separating transformers with high insulation level and separating transformers with output voltages exceeding... | |
| Safety of transformers, reactors, power supply units and combinations thereof Part 2-12: Particular requirements and tests for constant voltage transformers and power supply units for constant voltage | |
| Safety of transformers, reactors, power supply units and combinations thereof Part 2-14: Particular requirements and test for variable transformers and power supply units incorporating variable transformers | |
| Safety of transformers, reactors, power supply units and combinations thereof Part 2-15: Particular requirements and tests for isolating transformers for the supply of medical locations | |
| Safety of transformers, reactors, power supply units and combinations thereof Part 2-20: Particular requirements and tests for small reactors | |
| Safety of transformers, reactors, power supply units and combinations thereof Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites | |
| Safety of transformers, reactors, power supply units and combinations thereof Part 2-26: Particular requirements and tests for transformers and power supply units for saving energy and other purposes | |
| Safety of transformers, reactors, power supply units and combinations thereof Part 2-3: Particular requirements and tests for ignition transformers for gas and oil burners | |
| Safety of transformers, reactors, power supply units and combinations thereof Part 2-5: Particular requirements and tests for transformer for shavers, power supply units for shavers and shaver supply units | |
| Safety of transformers, reactors, power supply units and combinations thereof Part 2-8: Particular requirements and tests for transformers and power supply units for bells and chimes | |
| Safety of transformers, reactors, power supply units and combinations thereof Part 2-9: Particular requirements and tests for transformers and power supply units for class III handlamps for tungsten filament lamps... | |
| Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V Part 2-13: Particular requirements and tests for auto transformers and power supply... | |
| Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V Part 2-16: Particular requirements and tests for switch mode power supply units... | |
| Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V Part 2-4: Particular requirements and tests for isolating transformers and power supply... | |
| Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V Part 2-6: Particular requirements and tests for safety isolating transformers and power... | |
| Safety of transformers, reactors, power supply units and similar products for voltages up to 1 100 V Part 2-16: Particular requirements and tests for switch mode power supply units and... | |
| Salt mist corrosion testing of photovoltaic (PV) modules | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Guide to the designation of current in alkaline secondary cell and battery standards | |
| Secondary cells and batteries for photovoltaic energy systems (PVES) - General requirements and methods of test | |
| Secondary cells and batteries for renewable energy storage - General requirements and methods of test \x96 Part 2: On-grid applications | |
| Secondary cells and batteries for renewable energy storage - General requirements and methods of test Part 1: Photovoltaic off-grid application | |
| Secondary cells and batteries for renewable energy storage - General requirements and methods of test Part 2: On-grid applications | |
| Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 1: Calculation of short-circuit currents | |
| Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 2: Calculation of effects | |
| Superconductivity - Part 10: Critical temperature measurement - Critical temperature of composite superconductors by a resistance method | |
| Superconductivity - Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in Cu/Nb-Ti multifilamentary composites | |
| Superconductivity - Part 1: Critical current measurement - DC critical current of Nb-Ti composite superconductors | |
| Superconductivity - Part 2: Critical current measurement - DC critical current of Nb3Sn composite superconductors | |
| Superconductivity - Part 3: Critical current measurement - DC critical current of Ag-and/or Ag alloy-sheathed Bi-2212 and Bi-2223 oxide superconductors | |
| Superconductivity - Part 7: Electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies | |
| Superconductivity - Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors | |
| Superconductivity Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors | |
| Superconductivity Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires | |
| Superconductivity Part 14: Superconducting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices | |
| Superconductivity Part 15: Electronic characteristic measurements - Intrinsic surface impedance of superconductor films at microwave frequencies | |
| Superconductivity Part 16: Electronic characteristic measurements - Power-dependent surface resistance of superconductors at microwave frequencies | |
| Superconductivity Part 17: Electronic characteristic measurements - Local critical current density and its distribution in large-area superconducting films | |
| Superconductivity Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors | |
| Superconductivity Part 19: Mechanical properties measurement - Room temperature tensile test of reacted Nb3Sn composite superconductors | |
| Superconductivity Part 21: Superconducting wires - Test methods for practical superconducting wires - General characteristics and guidance | |
| Superconductivity Part 22-1: Superconducting electronic devices - Generic specification for sensors and detectors | |
| Superconductivity Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors | |
| Superconductivity Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires | |
| Superconductivity Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors | |
| Superconductivity Part 8: AC loss measurements - Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil... | |
| Surface mounting technology - Part 1: Standard method for the specification of surface mounting components (SMDs) | |
| Surface mounting technology - Part 2: Transportation and storage conditions of surface mounting devices (SMD) - Application guide | |
| Surface mounting technology Part 3: Standard method for the specification of components for Through Hole Reflow (THR) soldering | |
| Surface mounting technology Part 4: Classification, packaging, labelling and handling of moisture sensitive devices | |
| Test method for the mechanical strength of cores made of magnetic oxides | |
| Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV) | |
| Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval | |
| Transformers and inductors for use in telecommunication and electronic equipment - Main dimensions of coil formers Part 1: Coil formers for laminated cores | |
| Transmission of audio and/or video and related signal using infra-red radiation - Part 6: Video and audio-visual signals | |
| Transmission of audio and/or video and related signals using infra-red radiation - Part 1: General | |
| Transmission of audio and/or video and related signals using infra-red radiation - Part 2: Transmission systems for audio wide band and related signals | |
| Transmission of audio and/or video and related signals using infra-red radiation - Part 3: Transmission systems for audio signals for conference and similar systems | |
| Transmission of audio and/or video and related signals using infrared radiation - Part 8-1: Digital audio and related signals | |
| Transmission systems for audio and/or video and related signals using infra-red radiation - Part 7: Digital audio signals for conference and similar applications | |
| Ultrasonics - Flow measurement systems - Flow test object | |
| Ultrasonics - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 0,5 MHz to 5 MHz | |
| Videodisk players - Methods of measurement | |
| Weibull analysis | |
| Wind energy generation systems Part 21-1: Measurement and assessment of electrical characteristics - Wind turbines | |
| Wind power generation systems Part 12-1: Power performance measurement of electricity producing wind turbines | |
| Wind turbine Part 23: Full-scale structural testing of rotor blades | |
| Wind turbines - Part 12-1: Power performance measurements of electricity producing wind turbines | |
| Wind turbines - Part 1: Design requirements | |
| Wind turbines - Part 22: Conformity testing and certification of wind turbines | |
| Wind turbines - Part 24: Lightning protection | |
| Wind turbines - Part 25-1: Communications for monitoring and control of wind power plants - Overall description of principles and models | |
| Wind turbines - Part 25-2: Communications for monitoring and control of wind power plants - Information models | |
| Wind turbines - Part 25-3: Communications for monitoring and control of wind power plants - Information exchange models | |
| Wind turbines - Part 25-5: Communications for monitoring and control of wind power plants - Conformance testing | |
| Wind turbines Part 11: Acoustic noise measurement techniques | |
| Wind turbines Part 12-2: Power performance of electricity producing wind turbines based on nacelle anemometry | |
| Wind turbines Part 13: Measurement of mechanical loads | |
| Wind turbines Part 1: Design requirements | |
| Wind turbines Part 21: Measurement and assessment of power quality characteristics of grid connected wind turbines | |
| Wind turbines Part 22: Conformity testing and certification of wind turbines | |
| Wind turbines Part 25-4: Communications for monitoring and control of wind power plants - Mapping to communication profile | |
| Wind turbines Part 25-6: Communications for monitoring and control of wind power plants - Logical node classes and data classes for condition monitoring | |
| Wind turbines Part 27-1: Electrical simulation models - Wind turbines | |
| Wind turbines Part 2: Small wind turbines | |
| Wind turbines Part 3: Design requirements for offshore wind turbines | |
| Wind turbines Part 4: Design requirements for wind turbine gearboxes |
| << Prev | Next >> |