Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
450
500
550
600
650
700
720
730
740
750
760
770
779
780
781
782
783
784
785
786
787
788
789
790
791
800
810
820
830
840
850
900
950
1000
1050
1100
1150
1500
1620
| Product Name | Notes |
|---|---|
| Audiometers - Part 2: Equipment for speech audiometry | |
| Audiometers - Part 4: Equipment for extended high-frequency audiometry | |
| Automatic controls for household and similar use - Part 2: Particular requirements for humidity sensing controls | |
| Automatic electrical controls \x96 Part 2: Particular requirements for automatic electrical burner control systems | |
| Automatic electrical controls for household and similar use - Part 2: Particular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements | |
| Automatic electrical controls for household and similar use - Part 2: Particular requirements for automatic electrical water level controls of the float type for household and similar applications | |
| Automatic electrical controls for household and similar use - Part 2: Particular requirements for electric actuators | |
| Automatic electrical controls for household and similar use - Part 2: Particular requirements for electrically operated door locks | |
| Automatic electrical controls for household and similar use - Part 2: Particular requirements for electrically operated oil valves, including mechanical requirements | |
| Automatic electrical controls for household and similar use - Part 2: Particular requirements for electrically operated water valves, including mechanical requirements | |
| Automatic electrical controls for household and similar use - Part 2: Particular requirements for energy regulators | |
| Automatic electrical controls for household and similar use - Part 2: Particular requirements for motor starting relays | |
| Automatic electrical controls for household and similar use - Part 2: Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type | |
| Automatic electrical controls for household and similar use - Part 2: Particular requirements for thermal motor protectors | |
| Automatic electrical controls for household and similar use - Part 2: Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps | |
| Automatic electrical controls for household and similar use - Part 2: Particular requirements for timers and time switches | |
| Automatic electrical controls for household and similar use Part 2: Particular requirements for automatic electrical air flow, water flow and water level sensing controls | |
| Automatic electrical controls for household and similar use Part 2: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements | |
| Automatic electrical controls for household and similar use Part 2: Particular requirements for electric actuators | |
| Automatic electrical controls for household and similar use Part 2: Particular requirements for electrical controls for electrical household appliances | |
| Automatic electrical controls for household and similar use Part 2: Particular requirements for electrically operated door locks | |
| Automatic electrical controls for household and similar use Part 2: Particular requirements for temperature sensing controls | |
| Automatic electrical controls for household and similar use Part I: General requirements | |
| Automatic electrical controls Part 1: General requirements | |
| Automatic electrical controls Part 2: Particular requirements for automatic electrical burner control systems | |
| Automatic electrical controls Part 2: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements | |
| Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirements | |
| Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 21: Particular requirements for boxes and enclosures with provision for suspension means | |
| Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 22: Particular requirements for connecting boxes and enclosures | |
| Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 23: Particular requirements for floor boxes and enclosures | |
| Boxes and enclosures for electrical accessories for household and similar fixed electrical installations \x96 Part 22: Particular requirements for connecting boxes and enclosures | |
| Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 1: General requirements | |
| Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 23: Particular requirements for floor boxes and enclosures | |
| Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 24: Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment | |
| Boxes and enclosures for electrical accessories for household and similar fixed electrical installations. Part 24: Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipmen | |
| Cable networks for television signals, sound signals and interactive services - Part 13: Optical systems for broadcast signal transmissions | |
| Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable networks | |
| Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment | |
| Cable networks for television signals, sound signals and interactive services - Part 7-1: Hybrid fibre coax outside plant status monitoring Physical (PHY) layer specification | |
| Cable networks for television signals, sound signals and interactive services - Part 7-2: Hybrid fibre coax outside plant status monitoring Media Access Control (MAC) layer specification | |
| Cable networks for television signals, sound signals and interactive services Part 1-1: RF cabling for two way home networks | |
| Cable networks for television signals, sound signals and interactive services Part 1-2: Performance requirements for signals delivered at the system outlet in operation | |
| Cable networks for television signals, sound signals and interactive services Part 101: System performance of forward paths loaded with digital channels only | |
| Cable networks for television signals, sound signals and interactive services Part 10: System performance for return paths | |
| Cable networks for television signals, sound signals and interactive services Part 11: Safety | |
| Cable networks for television signals, sound signals and interactive services Part 13-1: Bandwidth expansion for broadcast signal over FTTH system | |
| Cable networks for television signals, sound signals and interactive services Part 14: Optical return path systems using RFoG technology | |
| Cable networks for television signals, sound signals and interactive services Part 1: System performance of forward paths | |
| Cable networks for television signals, sound signals and interactive services Part 3-1: Methods of measurement of non-linearity for full digital channel load with DVB-C signals | |
| Cable networks for television signals, sound signals and interactive services Part 4: Passive wideband equipment for coaxial cable networks | |
| Cable networks for television signals, sound signals and interactive services Part 5: Headend equipment | |
| Cable networks for television signals, sound signals and interactive services Part 7-1: Hybrid Fibre Coax Outside Plant Status Monitoring - Physical (PHY) Layer Specification | |
| Cable networks for television signals, sound signals and interactive services Part 7-3: Hybrid fibre coax outside plant status monitoring - Power Supply to Transponder Interface Bus (PSTIB) | |
| Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V | |
| Ceramic and glass insulating materials - Part 1: Definitions and classification | |
| Ceramic and glass insulating materials - Part 2: Methods of test | |
| Ceramic and glass-insulating materials - Part 3: Specifications for individual materials | |
| Classification of environmental conditions - Part 1: Environmental parameters and their severities | |
| Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Introduction | |
| Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 1: Storage | |
| Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 2: Transportation | |
| Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 3: Stationary use at weatherprotected locations | |
| Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 4: Stationary use at non-weatherprotected locations | |
| Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 5: Ground vehicle installations | |
| Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 6: Ship environment | |
| Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 7: Portable and non-stationary use | |
| Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 9: Microclimates inside products | |
| Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities. Ship equipment | |
| Classification of environmental conditions Part 2-1: Environmental conditions appearing in nature - Temperature and humidity | |
| Classification of environmental conditions Part 2-2: Environmental conditions appearing in nature - Precipitation and wind | |
| Classification of environmental conditions Part 2-3: Environmental conditions appearing in nature - Air pressure | |
| Classification of environmental conditions Part 2-9: Environmental conditions appearing in nature - Measured shock and vibration data - Storage, transportation and in-use | |
| Combined flexible materials for electrical insulation Part 2: Methods of test | |
| Combined flexible materials for electrical insulation Part 3: Specifications for individual materials | |
| Detection and determination of specified additives in mineral insulating oils | |
| Diagnostic X-ray imaging equipment - Characteristics of general purpose and mammographic anti-scatter grids | |
| Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for mechanical support of electrical devices in switchgear and controlgear installations | |
| Discrete semiconductor devices and integrated circuits - Part 5-2: Optoelectronic devices - Essential ratings and characteristics | |
| Discrete semiconductor devices and integrated circuits Part 5-1: Optoelectronic devices - General | |
| Discrete semiconductor devices and integrated circuits Part 5-3: Optoelectronic devices - Measuring methods | |
| Dispositivi elettrici automatici di comando per uso domestico e similare - Parte 2: Norme particolari per le valvole ad azionamento elettrico per olio combustibile, comprese le prescrizioni meccaniche - VERSIONE... | |
| Electrical measuring transducers for converting a.c. electrical quantities to analogue or digital signals | |
| Electroacoustics - Audiometric equipment - Part 3: Test signals of short duration | |
| Electroacoustics - Audiometric equipment - Part 5: Instruments for the measurement of aural acoustic impedance/admittance | |
| Electroacoustics - Audiometric equipment Part 1: Equipment for pure-tone audiometry | |
| Electroacoustics - Audiometric equipment Part 6: Instruments for the measurement of otoacoustic emissions | |
| Electroacoustics - Audiometric equipment Part 7: Instruments for the measurement of auditory brainstem responses | |
| Equipment for continuous monitoring radioactivity in gaseous effluents - Part 1: General requirements | |
| Equipment for continuous monitoring radioactivity in gaseous effluents - Part 3: Specific requirements for radioactive noble gas monitors | |
| Equipment for continuous monitoring radioactivity in gaseous effluents - Part 4: Specific requirements for iodine monitors | |
| Equipment for continuous monitoring radioactivity in gaseous effluents - Part 5: Specific requirements for tritium monitors | |
| Equipment for continuous monitoring radioactivity in gaseous effluents Part 2: Specific requirements for aerosols monitors including transuranic aerosols | |
| Expression of performance of electrochemical analyzers - Part 1: General | |
| Expression of performance of electrochemical analyzers - Part 2: pH value | |
| Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity | |
| Fibre ottiche - Parte 1-21: Metodi di misura e procedure di prova - Geometria del rivestimento | |
| Fibre ottiche - Parte 1-22: Metodi di misura e procedure di prova - Misura della lunghezza | |
| Fibre ottiche - Parte 1-45: Metodi di misura e procedure di prova - Diametro del campo modale | |
| Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test | |
| Fire hazard testing - Part 5-1: Corrosion damage effects of fire effluent - General guidance | |
| Fire hazard testing - Part 6-1: Smoke obscuration - General guidance | |
| Fire hazard testing Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines | |
| Fire hazard testing Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment | |
| Fire hazard testing Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods | |
| Fire hazard testing Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines | |
| Fire hazard testing Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids | |
| Fire hazard testing Part 10-2: Abnormal heat - Ball pressure test | |
| Fire hazard testing Part 11-10: Test flames - 50 W horizontal and vertical flame test methods | |
| Fire hazard testing Part 11-20: Test flames - 500 W flame test methods | |
| Fire hazard testing Part 11-2: Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement and guidance | |
| Fire hazard testing Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods | |
| Fire hazard testing Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method | |
| Fire hazard testing Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance | |
| Fire hazard testing Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure | |
| Fire hazard testing Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) | |
| Fire hazard testing Part 2-12: Glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test method for materials | |
| Fire hazard testing Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials | |
| Fire hazard testing Part 2: Test methods Section 4/sheet 0: Diffusion type and premixed type flame test methods | |
| Fire hazard testing Part 4: Terminology concerning fire tests for electrotechnical products | |
| Fire hazard testing Part 6-1: Smoke obscuration - General guidance | |
| Fire hazard testing Part 6-2: Smoke obscuration - Summary and relevance of test methods | |
| Fire hazard testing Part 7-1: Toxicity of fire effluent - General guidance | |
| Fire hazard testing Part 7-2: Toxicity of fire effluent - Summary and relevance of test methods | |
| Fire hazard testing Part 7-3: Toxicity of fire effluent - Use and interpretation of test results | |
| Fire hazard testing Part 8-1: Heat release - General guidance | |
| Fire hazard testing Part 8-2: Heat release - Summary and relevance of test methods | |
| Fire hazard testing Part 9-1: Surface spread of flame - General guidance | |
| Fire hazard testing Part 9-2: Surface spread of flame - Summary and relevance of test methods | |
| Flammability of solid non-metallic materials when exposed to flame sources - List of test methods | |
| Flexible insulating sleeving - Part 1: Definitions and general requirements | |
| Flexible insulating sleeving - Part 3 : Specifications for individual types of sleeving - Sheet 229: Heat shrinkable semi-flexible, polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1 | |
| Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 136: Extruded fluorosilicone sleeving - General purpose | |
| Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 300: Glass textile fibre sleeving, braided, uncoated | |
| Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 320: Polyethylene terephthalate textile sleeving, lightly impregnated | |
| Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheets 240 to 243: Heat-shrinkable PTFE sleeving | |
| Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheets 343 to 345: Expandable braided ethylene chlorotrifluoroethyl ene (E-CTFE) textile sleeving uncoated | |
| Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheets 400 to 402: Glass textile sleeving with silicone elastomer coating | |
| Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheets 403 to 405: Glass textile sleeving with acrylic coating | |
| Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheets 420 to 422: Polyethylene terephthalate textile with acrylic based coating | |
| Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 151: Extruded PVC/nitrile rubber - General purpose | |
| Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 165: Extruded polyolefin, flame retarded, limited fire hazard sleeving | |
| Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 212: Heat-shrinkable, polyolefin sleevings | |
| Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 216: Heat-shrinkable, flame retarded, limited fire hazard sleeving | |
| Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 228: Heat-shrinkable, semi-rigid polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1 | |
| Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 248: General purpose, heat-shrinkable, dual wall polyolefin sleeving, flame retarded, shrink ratios 2:1, 3:1, 4:1 | |
| Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 409: Glass textile sleeving with polyurethane (PUR)-based coating | |
| Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 100 to 105: Extruded PVC sleeving | |
| Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 121 to 124: Extruded silicone sleeving | |
| Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 145 to 147: Extruded PTFE sleeving | |
| Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 340 to 342: Expandable braided polyethylene terephthalate textile sleeving | |
| Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 406 to 408: Glass textile sleeving with PVC coating | |
| Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving \x96 Sheet 233: Heat-shrinkable, fluoroelastomer sleeving, flameretarded, fluid resistant, shrink ratio 2:1 | |
| Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving Sheet 211: Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1 | |
| Flexible insulating sleeving Part 2: Methods of test | |
| Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 205: Heat-shrinkable chlorinated polyolefin sleeving, flame retarded, nominal shrink ratio 1,7:1 and 2:1 | |
| Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 209: Heat-shrinkable polyolefin sleeving, general purpose, flame retarded | |
| Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame retarded, thick and medium wall | |
| Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 216: Heat-shrinkable, flame-retarded, limited-fire hazard sleeving | |
| Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 246: Heat-shrinkable polyolefin sleeving, dual wall, not flame retarded | |
| Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 247: Heat-shrinkable polyolefin sleeving, dual wall, not flame retarded, thick and medium wall | |
| Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 271: Heat-shrinkable elastomer sleevings, flame retarded, fluid resistant, shrink ratio 2:1 | |
| Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking | |
| Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 281: Heat-shrinkable, polyolefin sleeving, semiconductive | |
| Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 282: Heat-shrinkable, polyolefin sleeving - Stress control | |
| Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 283: Heat-shrinkable, polyolefin sleeving, for bus-bar insulation | |
| Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 284: Heat-shrinkable sleevings, for oil barrier applications | |
| Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 285: Heat-shrinkable polyolefin sleeving, for medium voltage joint insulation | |
| Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheets 116 and 117: Extruded polychloroprene, general purpose | |
| Hand-held motor-operated electric tools - Safety - Part 2: Particular requirements for grinders, polishers and disk-type sanders | |
| Hand-held motor-operated electric tools - Safety Part 1: General requirements | |
| Hand-held motor-operated electric tools - Safety Part 2: Particular requirements for band saws | |
| Hand-held motor-operated electric tools - Safety Part 2: Particular requirements for chain saws | |
| Hand-held motor-operated electric tools - Safety Part 2: Particular requirements for circular saws | |
| Hand-held motor-operated electric tools - Safety Part 2: Particular requirements for concrete vibrators | |
| Hand-held motor-operated electric tools - Safety Part 2: Particular requirements for cut-off machines | |
| Hand-held motor-operated electric tools - Safety Part 2: Particular requirements for die grinders and small rotary tools | |
| Hand-held motor-operated electric tools - Safety Part 2: Particular requirements for drain cleaners | |
| Hand-held motor-operated electric tools - Safety Part 2: Particular requirements for drills and impact drills | |
| Hand-held motor-operated electric tools - Safety Part 2: Particular requirements for grinders, polishers and disk-type sanders | |
| Hand-held motor-operated electric tools - Safety Part 2: Particular requirements for hammers | |
| Hand-held motor-operated electric tools - Safety Part 2: Particular requirements for hedge trimmers | |
| Hand-held motor-operated electric tools - Safety Part 2: Particular requirements for jointers | |
| Hand-held motor-operated electric tools - Safety Part 2: Particular requirements for planers | |
| Hand-held motor-operated electric tools - Safety Part 2: Particular requirements for reciprocating saws (jig and sabre saws) | |
| Hand-held motor-operated electric tools - Safety Part 2: Particular requirements for routers and trimmers | |
| Hand-held motor-operated electric tools - Safety Part 2: Particular requirements for screwdrivers and impact wrenches | |
| Hand-held motor-operated electric tools - Safety Part 2: Particular requirements for shears and nibblers | |
| Hand-held motor-operated electric tools - Safety Part 2: Particular requirements for strapping tools | |
| Hand-held motor-operated electric tools - Safety Part 2: Particular requirements for tackers | |
| Hand-held motor-operated electric tools - Safety Part 2: Particular requirements for tappers | |
| Heat test source (H.T.S.) lamps for carrying out heating tests on luminaires | |
| Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS - Part 1: VHS and compact VHS video cassette system | |
| Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS - Part 2: FM audio recording | |
| Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS - Part 4: S-VHS video cassette system - ET mode | |
| Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS - Part 5: D-VHS | |
| Helican-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS - Part 3: S-VHS | |
| Helican-scan video-tape cassette system using 19 mm (3/4 in) magnetic tape, known as U-format | |
| High-pressure sodium vapour lamps - Performance specifications | |
| Household and similar appliances - Test code for the determination of airborne acoustical noise Part 2: Particular requirements for fan heaters | |
| Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-11: Particular requirements for electrically-operate d food preparation appliances | |
| Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2: Particular requirements for dishwashers | |
| Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2: Particular requirements for electric hair care appliances | |
| Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2: Particular requirements for electric thermal storage room heaters | |
| Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2: Particular requirements for fans | |
| Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 3: Procedure for determining and verifying declared noise emission values | |
| Household and similar electrical appliances - Test code for the determination of airborne acoustical noise \x96 Part 2-14: Particular requirements for refrigerators, frozen-food storage cabinets and food freezers | |
| Household and similar electrical appliances - Test code for the determination of airborne acoustical noise \x96 Part 2-6: Particular requirements for tumble dryers | |
| Household and similar electrical appliances - Test code for the determination of airborne acoustical noise Part 2-14: Particular requirements for refrigerators, frozen-food storage cabinets and food freezers | |
| Household and similar electrical appliances - Test code for the determination of airborne acoustical noise Part 2: Particular requirements for electric cooking ranges, ovens, grills, microwave ovens and any combination... | |
| Household and similar electrical appliances - Test code for the determination of airborne acoustical noise Part 2: Particular requirements for electric thermal storage room heaters | |
| Household and similar electrical appliances - Test code for the determination of airborne acoustical noise Part 2: Particular requirements for range hoods | |
| Household and similar electrical appliances - Test code for the determination of airborne acoustical noise Part 2: Particular requirements for refrigerators, frozen-food storage cabinets and food freezers | |
| Household and similar electrical appliances - Test code for the determination of airborne acoustical noise Part 2: Particular requirements for tumble dryers | |
| Household and similar electrical appliances - Test code for the determination of airborne acoustical noise Part 2: Particular requirements for vacuum cleaners | |
| Household and similar electrical appliances - Test code for the determination of airborne acoustical noise Part 2: Particular requirements for washing machines and spin extractors | |
| Household and similar electrical appliances - Test code for the determination of airborne noise Part 1: General requirements | |
| Household and similar electrical appliances \x96 Test code for the determination of airborne acoustical noise - Part 2: Particular requirements for electric shavers | |
| Household electric direct-acting room heaters - Methods for measuring performance | |
| Household electric direct-acting room heaters Methods for measuring performance | |
| Household electrical appliances - Performance - Water for testing | |
| Household microwave ovens - Methods for measuring performance | |
| Industrial electroheat equipment - Test methods for electroslag remelting furnaces | |
| Industrial electroheating equipment - Test methods for direct arc furnaces | |
| Industrial electroheating equipment - Test methods for submerged arc furnaces | |
| Industrial platinum resistance thermometers and platinum temperature sensors | |
| Industrial-process measurements and control equipment \x96 Operating conditions - Part 1: Climatic conditions | |
| Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests | |
| Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution | |
| Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress | |
| Insulation coordination for equipment within low-voltage systems - Part 5: Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm | |
| Insulation coordination for equipment within low-voltage systems Part 5: Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm | |
| Insulators - Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 kV up to but not including 300 kV | |
| Laminated pressboard for electrical purposes Part 1: Definitions, classification and general requirements | |
| Laminated pressboard for electrical purposes Part 3: Specifications for individual materials Sheet 1: Requirements for laminated precompressed pressboard, Types LB 3.1A.1 and LB 3.1A.2 | |
| Laminations for transformers and inductors Part 1: Mechanical and electrical characteristics | |
| Live working - Terminology for tools, devices and equipment | |
| Loading tests on overhead line structures | |
| Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath | |
| Maintainability of equipment - Part 2: Maintainability requirements and studies during the design and development phase | |
| Maintainability of equipment - Part 3: Verification and collection, analysis and presentation of data | |
| Maintainability of equipment - Part 5: Testability and diagnostic testing | |
| Maximum lamp outlines for incandescent lamps | |
| Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values | |
| Measuring methods for video tape properties | |
| Medical electrical equipment - Characteristics and test conditions of radionuclide imaging devices - Anger type gamma cameras | |
| Medical electrical equipment - Dosimeters with ionization chambers as used in radiotherapy | |
| Method for the determination of the space required by capacitors and resistors with unidirectional terminations | |
| Method of measuring the pinch temperature of quartz glass lamps | |
| Methods for measuring the performance of electric household coffee makers | |
| Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 1: Cables | |
| Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 2: Terminations | |
| Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V Part 1: Cables | |
| Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V Part 2: Terminations | |
| Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V Part 3: Guide for use | |
| Non-broadcast video tape recorders - Time base stability | |
| Nuclear facilities - Electrical equipment important to safety - Qualification | |
| Nuclear power plants - Instrumentation and control systems important to safety - Separation | |
| Nuclear power plants - Instrumentation and control systems important to safety - Surveillance testing | |
| Operating conditions for industrial-process measurement and control equipment - Part 2: Power | |
| Operating conditions for industrial-process measurement and control equipment - Part 3: Mechanical influences | |
| Operating conditions for industrial-process measurement and control equipment - Part 4: Corrosive and erosive influences | |
| Optical fibre cables - Part 2-30: Indoor cables - Family specification for ribbon cables | |
| Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling | |
| Optical fibre cables - Part 2: Indoor cables - Sectional specification | |
| Optical fibre cables - Part 3-21: Outdoor cables - Detailed specification for optical self-supporting aerial telecommunication cables for use in premises cabling | |
| Optical fibre cables Part 1-1: Generic specification - General | |
| Optical fibre cables Part 1-20: Generic specification - Basic optical cable test procedures - General and definitions | |
| Optical fibre cables Part 1-21: Generic specification - Basic optical cable test procedures - Mechanical tests methods | |
| Optical fibre cables Part 1-23: Generic specification - Basic optical cable test procedures - Cable element test methods | |
| Optical fibre cables Part 1-24: Generic specification - Basic optical cable test procedures - Electrical test methods | |
| Optical fibre cables Part 1-2: Generic specification - Basic optical cable test procedures | |
| Optical fibre cables Part 1-2: Generic specification - Cross reference table for optical cable test procedures | |
| Optical fibre cables Part 1-3: Generic specification - Optical cable elements | |
| Optical fibre cables Part 2-10: Indoor optical fibre cables - Family specification for simplex and duplex cables | |
| Optical fibre cables Part 2-11: Indoor optical fibre cables - Detailed specification for simplex and duplex cables for use in premises cabling | |
| Optical fibre cables Part 2-20: Indoor cables - Family specification for multi-fibre optical cables | |
| Optical fibre cables Part 2-21: Indoor optical fibre cables - Detailed specification for multi-fibre optical distribution cables for use in premises cabling | |
| Optical fibre cables Part 2-22: Indoor cables - Detail specification for multi-simplex breakout optical cables to be terminated with connectors | |
| Optical fibre cables Part 2-40: Indoor optical fibre cables - Family specification for A4 fibre cables | |
| Optical fibre cables Part 2-41: Indoor cables - Product specification for simplex and duplex buffered A4 fibres | |
| Optical fibre cables Part 2-42: Indoor optical fibre cables - Product specification for simplex and duplex cables with A4 fibres | |
| Optical fibre cables Part 2-50: Indoor cables - Family specification for simplex and duplex cables for use in terminated cable assemblies | |
| Optical fibre cables Part 2-51: Indoor cables - Detail specification for simplex and duplex cables for use in cords for controlled environment | |
| Optical fibre cables Part 3-10: Outdoor cables - Family specification for duct, directly buried or lashed aerial optical telecommunication cables | |
| Optical fibre cables Part 3-11: Outdoor cables - Product specification for duct, directly buried and lashed aerial single-mode optical fibre telecommunication cables | |
| Optical fibre cables Part 3-12: Outdoor cables - Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling | |
| Optical fibre cables Part 3-20: Outdoor cables - Family specification for self-supporting aerial telecommunication cables | |
| Optical fibre cables Part 3-30: Outdoor cables - Family specification for optical telecommunication cables for lakes, river crossings and coastal applications | |
| Optical fibre cables Part 3-40: Outdoor cables - Family specification for sewer cables and conduits for installation by blowing and/or pulling in non-man accessible storm and sanitary sewers | |
| Optical fibre cables Part 3-50: Outdoor cables - Family specification for gas pipe cables and subducts for installation by blowing and/or pulling/dragging in gas pipes | |
| Optical fibre cables Part 3-60: Outdoor cables - Family specification for drinking water pipe cables and subducts for installation by blowing and/or pulling/dragging/flo ating in drinking water pipes | |
| Optical fibre cables Part 3-70: Outdoor cables - Family specification for outdoor optical fibre cables for rapid/multiple deployment | |
| Optical fibre cables Part 3: Sectional specification - Outdoor cables | |
| Optical fibre cables Part 4-10: Family Specification - OPGW (Optical Ground Wires) along electrical power lines | |
| Optical fibre cables Part 4-20: Aerial optical cables along electrical power lines - Family specification for ADSS (All Dielectric Self Supported) optical cables | |
| Optical fibre cables Part 4: Sectional specification - Aerial optical cables along electrical power lines | |
| Optical fibres - Part 1-33: Measurement methods and test procedures - Stress corrosion susceptibility | |
| Optical fibres - Part 1-34: Measurement methods and test procedures - Fibre curl | |
| Optical fibres - Part 1-47: Measurement methods and test procedures - Macrobending loss | |
| Optical fibres - Part 1-49: Measurement methods and test procedures Differential mode delay | |
| Optical fibres Part 1-1: Measurement methods and test procedures - General and guidance | |
| Optical fibres Part 1-20: Measurement methods and test procedures - Fibre geometry | |
| Optical fibres Part 1-30: Measurement methods and test procedures - Fibre proof test | |
| Optical fibres Part 1-31: Measurement methods and test procedures - Tensile strength | |
| Optical fibres Part 1-32: Measurement methods and test procedures - Coating strippability | |
| Optical fibres Part 1-40: Measurement methods and test procedures - Attenuation | |
| Optical fibres Part 1-41: Measurement methods and test procedures - Bandwidth | |
| Optical fibres Part 1-42: Measurement methods and test procedures - Chromatic dispersion | |
| Optical fibres Part 1-43: Measurement methods and test procedures - Numerical aperture measurement | |
| Optical fibres Part 1-44: Measurement methods and test procedures - Cut-off wavelength | |
| Optical fibres Part 1-46: Measurement methods and test procedures - Monitoring of changes in optical transmittance | |
| Optical fibres Part 1-48: Measurement methods and test procedures - Polarization mode dispersion | |
| Optical fibres Part 1-50: Measurement methods - Damp heat (steady state) tests | |
| Optical fibres Part 1-51: Measurement methods and test procedures - Dry heat (steady state) tests | |
| Optical fibres Part 1-52: Measurement methods and test procedures - Change of temperature tests | |
| Optical fibres Part 1-53: Measurement methods and test procedures - Water immersion tests | |
| Optical fibres Part 1-54: Measurement methods and test procedures - Gamma irradiation | |
| Optical fibres Part 1-60: Measurement methods and test procedures - Beat length | |
| Optical fibres Part 1-61: Measurement methods and test procedures - Polarization crosstalk | |
| Optical fibres Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres | |
| Optical fibres Part 2-20: Product specifications - Sectional specification for category A2 multimode fibres | |
| Optical fibres Part 2-30: Product specifications - Sectional specification for category A3 multimode fibres | |
| Optical fibres Part 2-40: Product specifications - Sectional specification for category A4 multimode fibres | |
| Optical fibres Part 2-50: Product specifications - Sectional specification for class B single-mode fibres | |
| Optical fibres Part 2-60: Product specifications - Sectional specification for category C sinlge-mode intraconnection fibres | |
| Optical fibres Part 2-70: Product specifications - Sectional specification for polarization-maintai ning fibres | |
| Optical fibres Part 2: Product specifications - General | |
| Oscillatori controllati a cristalli di quarzo di qualit\xe0 certificata - Parte 4-1: Specifica di dettaglio in bianco - Approvazione della capacit\xe0 | |
| Oscillatori controllati a cristalli di quarzo di qualit\xe0 certificata - Parte 4: Specifica settoriale - Approvazione della capacit\xe0 | |
| Oscillatori controllati a cristalli di quarzo di qualit\xe0 certificata - Parte 5-1: Specifica di dettaglio in bianco - Approvazione per qualifica | |
| Oscillatori controllati a cristalli di quarzo di qualit\xe0 certificata - Parte 5: Specifica settoriale - Approvazione per qualifica | |
| Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors | |
| Plastic films for electrical purposes Part 3: Specifications for individual materials Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors | |
| Plastic films for electrical purposes Part 3: Specifications for individual materials Sheet 8: Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation | |
| Pressboard and presspaper for electrical purposes - Part 2: Methods of test | |
| Pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials Sheet 1: Requirements for pressboard, types B.0.1, B.0.3, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1, B.4.3, B.5.1, B.5.3 and... | |
| Quartz crystal controlled oscillators of assessed quality Part 1: Generic specification | |
| Quartz crystal controlled oscillators of assessed quality Part 3: Standard outlines and lead connections | |
| Quartz crystal controlled oscillators of assessed quality Part 6: Phase jitter measurement method for quartz crystal oscillators and SAW oscillators - Application guidelines | |
| Semiconductor devices - Discrete devices Part 15: Isolated power semiconductor devices | |
| Semiconductor devices - Discrete devices Part 5-5: Optoelectronic devices - Photocouplers | |
| Semiconductor devices - Mechanical and climatic test method - Part 10: Mechanical shock | |
| Semiconductor devices - Mechanical and climatic test method - Part 13: Salt atmosphere | |
| Semiconductor devices - Mechanical and climatic test method - Part 3: External visual inspection | |
| Semiconductor devices - Mechanical and climatic test methods - Part 11: Rapid change of temperature - Two-fluid-bath method | |
| Semiconductor devices - Mechanical and climatic test methods - Part 12: Vibration, variable frequency | |
| Semiconductor devices - Mechanical and climatic test methods - Part 14: Robustness of terminations (lead integrity) | |
| Semiconductor devices - Mechanical and climatic test methods - Part 16: Particle impact noise detection (PIND) | |
| Semiconductor devices - Mechanical and climatic test methods - Part 17: Neutron irradiation | |
| Semiconductor devices - Mechanical and climatic test methods - Part 18: Ionizing radiation (total dose) | |
| Semiconductor devices - Mechanical and climatic test methods - Part 19: Die shear strength | |
| Semiconductor devices - Mechanical and climatic test methods - Part 1: General | |
| Semiconductor devices - Mechanical and climatic test methods - Part 22: Bond strength | |
| Semiconductor devices - Mechanical and climatic test methods - Part 23: High temperature operating life | |
| Semiconductor devices - Mechanical and climatic test methods - Part 25: Temperature cycling | |
| Semiconductor devices - Mechanical and climatic test methods - Part 26: Electrostatic discharge (ESD) sensitivity testing Human body model (HBM) | |
| Semiconductor devices - Mechanical and climatic test methods - Part 27: Electrostatic discharge (ESD) sensitivity testing Machine model (MM) | |
| Semiconductor devices - Mechanical and climatic test methods - Part 28: Electrostatic discharge (ESD) sensitivity testing - Charged device model (CDM) - device level | |
| Semiconductor devices - Mechanical and climatic test methods - Part 2: Low air pressure | |
| Semiconductor devices - Mechanical and climatic test methods - Part 30: Preconditioning of non-hermetic surface mount devices prior to reliability testing | |
| Semiconductor devices - Mechanical and climatic test methods - Part 31: Flammability of plastic-encapsulated devices (internally induced) | |
| Semiconductor devices - Mechanical and climatic test methods - Part 32: Flammability of plastic-encapsulated devices (externally induced) | |
| Semiconductor devices - Mechanical and climatic test methods - Part 36: Acceleration, steady state | |
| Semiconductor devices - Mechanical and climatic test methods - Part 38: Soft error test method for semiconductor devices with memory | |
| Semiconductor devices - Mechanical and climatic test methods - Part 39: Measurement of moisture diffusivity and water solublity in organic materials used for semiconductor components | |
| Semiconductor devices - Mechanical and climatic test methods - Part 4: Damp heat, steady state, highly accelerated stress test (HAST) | |
| Semiconductor devices - Mechanical and climatic test methods - Part 5: Steady-state temperature humidity bias life test | |
| Semiconductor devices - Mechanical and climatic test methods - Part 6: Storage at high temperature | |
| Semiconductor devices - Mechanical and climatic test methods - Part 8: Sealing | |
| Semiconductor devices - Mechanical and climatic test methods - Part 9: Permanence of marking | |
| Semiconductor devices - Mechanical and climatic test methods Part 15: Resistance to soldering temperature for through-hole mounted devices | |
| Semiconductor devices - Mechanical and climatic test methods Part 20-1: Handling, packing, labelling and shipping of surface-mount devices sensitive to the combined effect of moisture and soldering heat | |
| Semiconductor devices - Mechanical and climatic test methods Part 20: Resistance of plastic encapsulated SMDs to the combined effect of moisture and soldering heat | |
| Semiconductor devices - Mechanical and climatic test methods Part 21: Solderability | |
| Semiconductor devices - Mechanical and climatic test methods Part 23: High temperature operating life | |
| Semiconductor devices - Mechanical and climatic test methods Part 24: Accelerated moisture resistance - Unbiased HAST | |
| Semiconductor devices - Mechanical and climatic test methods Part 27: Electrostatic discharge (ESD) sensitivity testing - Machine model (MM) | |
| Semiconductor devices - Mechanical and climatic test methods Part 29: Latch-up test | |
| Semiconductor devices - Mechanical and climatic test methods Part 30: Preconditioning of non-hermetic surface mount devices prior to reliability testing | |
| Semiconductor devices - Mechanical and climatic test methods Part 33: Accelerated moisture resistance - Unbiased autoclave | |
| Semiconductor devices - Mechanical and climatic test methods Part 34: Power cycling | |
| Semiconductor devices - Mechanical and climatic test methods Part 35: Acoustic microscopy for plastic encapsulated electronic components | |
| Semiconductor devices - Mechanical and climatic test methods Part 37: Board level drop test method using an accelerometer | |
| Semiconductor devices - Mechanical and climatic test methods Part 40: Board level drop test method using a strain gauge | |
| Semiconductor devices - Mechanical and climatic test methods Part 42: Temperature and humidity storage | |
| Semiconductor devices - Mechanical and climatic test methods Part 43: Guidelines for IC reliability qualification plans | |
| Semiconductor devices - Mechanical and climatic test methods Part 44: Neutron beam irradiated single event effect (SEE) test method for semiconductor devices | |
| Semiconductor devices - Mechanical and climatic test methods Part 7: Internal moisture content measurement and the analysis of other residual gases | |
| Semiconductor devices Part 16-10: Technology Approval Schedule (TAS) for monolithic microwave integrated circuits | |
| Semiconductor devices Part 16-1: Microwave integrated circuits - Amplifiers | |
| Semiconductor devices Part 16-3: Microwave integrated circuits - Frequency converters | |
| Semiconductor devices Part 16-4: Microwave integrated circuits - Switches | |
| Semiconductor devices Part 16-5: Microwave integrated circuits - Oscillators | |
| Specification for high-voltage fuse-links for motor circuit applications | |
| Specification for high-voltage fuse-links motor circuit applications | |
| Specification for laminated pressboard - Part 2: Methods of test | |
| Specification for plastic films for electrical purposes - Part 1: Definitions and general requirements | |
| Specification for plastic films for electrical purposes - Part 2: Methods of test | |
| Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation... | |
| Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Requirements for polycarbonate (PC) films used for electrical insulation | |
| Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Requirements for fluoroethylene-propy lene (FEP) films used for electrical insulation | |
| Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheets 4 to 6: Requirements for polyimide films used for electrical insulation | |
| Specification for plastic films for electrical purposes Part 2: Methods of test | |
| Specification for pressboard and presspaper for electrical purposes Part 1: Definitions and general requirements | |
| Specification for pressboard and presspaper for electrical purposes Part 3: Specifications for individual materials - Sheet 2: Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1 | |
| Standard method of measuring the pinch temperature of quartz-tungsten-halo gen lamps | |
| Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches | |
| Switches for household and similar fixed electrical installations - Part 2-2: Particular requirements - Electromagnetic remotecontrol switches (RCS) | |
| Switches for household and similar fixed electrical installations - Part 2-3: Particular requirements - Time delay switches (TDS) | |
| Switches for household and similar fixed electrical installations - Part 2-4: Particular requirements - Isolating switches | |
| Switches for household and similar fixed electrical installations Part 1: General requirements | |
| Switches for household and similar fixed electrical installations Part 2-5: Particular requirements - Switches and related accessories for use in home and building electronic systems (HBES) | |
| Switches for household and similar fixed electrical installations Part 2-6: Particular requirements - Fireman's switches for exterior and interior signs and luminaires | |
| Switches for household and similar fixed-electrical installations - Part 1: General requirements | |
| Switches for household and similar fixed-electrical installations Part 1: General requirements | |
| Synthetic quartz crystal - Specifications and guidelines for use | |
| Terminology for high-voltage direct current (HVDC) transmission | |
| Test methods for electroheating installations with electron guns | |
| Test on gases evolved during combustion of materials from cables Part 1: Determination of the halogen acid gas content | |
| Test on gases evolved during combustion of materials from cables Part 2: Determination of acidity (by pH measurement) and conductivity | |
| Thermal-links - Requirements and application guide | |
| Thermistors - Directly heated positive step-function temperature coefficient Part 1-1: Blank detail specification - Current limiting application Assessment level EZ | |
| Thermistors - Directly heated positive step-function temperature coefficient Part 1-2: Blank detail specification - Heating element application Assessment level EZ | |
| Thermistors - Directly heated positive step-function temperature coefficient Part 1-3: Blank detail specification - Inrush current application - Assessment level EZ | |
| Thermistors - Directly heated positive step-function temperature coefficient Part 1-4: Blank detail specification - Sensing application - Assessment level EZ | |
| Thermistors - Directly heated positive temperature coefficient - Part 1: Generic specification | |
| Thyristor valves for high voltage direct current (HVDC) power transmission Part 1: Electrical testing | |
| Thyristor valves for high voltage direct current (HVDC) power transmission Part 2: Terminology | |
| Transmitters for use in industrial-process control systems Part 1: Methods for performance evaluation | |
| Transmitters for use in industrial-process control systems Part 2: Methods for inspection and routine testing | |
| Transmitters for using in industrial-process control systems Part 3: Methods for performance evaluation of intelligent transmitters |
| << Prev | Next >> |